We used to emit a flush_icache_all() whenever a dirty executable
mapping is set in the page table but we can instead call
flush_icache_mm() which will only send IPIs to cores that currently run
this mm and add a deferred icache flush to the others.
The number of calls to sbi_remote_fence_i() (tested without IPI
support):
With a simple buildroot rootfs:
* Before: ~5k
* After : 4 (!)
Tested on HW, the boot to login is ~4.5% faster.
With an ubuntu rootfs:
* Before: ~24k
* After : ~13k
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240202124711.256146-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.
So, use the purpose specific kcalloc() function instead of the argument
count * size in the kzalloc() function.
Also, it is preferred to use sizeof(*pointer) instead of sizeof(type)
due to the type of the variable can change and one needs not change the
former (unlike the latter).
Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Link: https://github.com/KSPP/linux/issues/162
Signed-off-by: Erick Archer <erick.archer@gmx.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20240120135400.4710-1-erick.archer@gmx.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Leonardo Bras <leobras@redhat.com> says:
I just saw the opportunity of optimizing the helper is_compat_task() by
introducing a compile-time test, and it made possible to remove some
#ifdef's without any loss of performance.
I also saw the possibility of removing the direct check of task flags from
general code, and concentrated it in asm/compat.h by creating a few more
helpers, which in the end helped optimize code.
arch_get_mmap_end() just got a simple improvement and some extra docs.
* b4-shazam-merge:
riscv: Introduce set_compat_task() in asm/compat.h
riscv: Introduce is_compat_thread() into compat.h
riscv: add compile-time test into is_compat_task()
riscv: Replace direct thread flag check with is_compat_task()
riscv: Improve arch_get_mmap_end() macro
Link: https://lore.kernel.org/r/20240103160024.70305-2-leobras@redhat.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Subbaraya Sundeep says:
====================
octeontx2-pf: RVU Mailbox fixes
This patchset fixes the problems related to RVU mailbox.
During long run tests some times VF commands like setting
MTU or toggling interface fails because VF mailbox is timedout
waiting for response from PF.
Below are the fixes
Patch 1: There are two types of messages in RVU mailbox namely up and down
messages. Down messages are synchronous messages where a PF/VF sends
a message to AF and AF replies back with response. UP messages are
notifications and are asynchronous like AF sending link events to
PF. When VF sends a down message to PF, PF forwards to AF and sends
the response from AF back to VF. PF has to forward VF messages since
there is no path in hardware for VF to send directly to AF.
There is one mailbox interrupt from AF to PF when raised could mean
two scenarios one is where AF sending reply to PF for a down message
sent by PF and another one is AF sending up message asynchronously
when link changed for that PF. Receiving the up message interrupt while
PF is in middle of forwarding down message causes mailbox errors.
Fix this by receiver detecting the type of message from the mbox data register
set by sender.
Patch 2:
During VF driver remove, VF has to wait until last message is
completed and then turn off mailbox interrupts from PF.
Patch 3:
Do not use ordered workqueue for message processing since multiple works are
queued simultaneously by all the VFs and PF link UP messages.
Patch 4:
When sending link event to VF by PF check whether VF is really up to
receive this message.
Patch 5:
In AF driver, use separate interrupt handlers for the AF-VF interrupt and
AF-PF interrupt. Sometimes both interrupts are raised to two CPUs at same
time and both CPUs execute same function at same time corrupting the data.
v2 changes:
Added missing mutex unlock in error path in patch 1
Refactored if else logic in patch 1 as suggested by Paolo Abeni
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
For PF to AF interrupt vector and VF to AF vector same
interrupt handler is registered which is causing race condition.
When two interrupts are raised to two CPUs at same time
then two cores serve same event corrupting the data.
Fixes: 7304ac4567 ("octeontx2-af: Add mailbox IRQ and msg handlers")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When PF sending link status messages to VF, it is possible
that by the time link_event_task work function is executed
VF might have brought down. Hence before sending VF link
status message check whether VF is up to receive it.
Fixes: ad513ed938 ("octeontx2-vf: Link event notification support")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Only one execution context for the workqueue used for PF and
VFs mailbox communication is incorrect since multiple works are
queued simultaneously by all the VFs and PF link UP messages.
Hence use default number of execution contexts by passing zero
as max_active to alloc_workqueue function. With this fix in place,
modify UP messages also to wait until completion.
Fixes: d424b6c024 ("octeontx2-pf: Enable SRIOV and added VF mbox handling")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
During VF driver remove, a message is sent to detach VF
resources to PF but VF is not waiting until message is
complete. Also mailbox interrupts need to be turned off
after the detach resource message is complete. This patch
fixes that problem.
Fixes: 05fcc9e089 ("octeontx2-pf: Attach NIX and NPA block LFs")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A single line of interrupt is used to receive up notifications
and down reply messages from AF to PF (similarly from PF to its VF).
PF acts as bridge and forwards VF messages to AF and sends respsones
back from AF to VF. When an async event like link event is received
by up message when PF is in middle of forwarding VF message then
mailbox errors occur because PF state machine is corrupted.
Since VF is a separate driver or VF driver can be in a VM it is
not possible to serialize from the start of communication at VF.
Hence to differentiate between type of messages at PF this patch makes
sender to set mbox data register with distinct values for up and down
messages. Sender also checks whether previous interrupt is received
before triggering current interrupt by waiting for mailbox data register
to become zero.
Fixes: 5a6d7c9dae ("octeontx2-pf: Mailbox communication with AF")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The OV7251 sensor only has a single data lane, so 2 entries is not valid.
Fix this to be 1 entry as the schema specifies.
The schema validation doesn't catch this currently due to some limitations
in handling of arrays vs. matrices, but a fix is being worked on.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Some hardware designs with multiple PCA954x devices use a reset GPIO
connected to all the muxes. Support this configuration by making use of
the reset controller framework which can deal with the shared reset
GPIOs. Fall back to the old GPIO descriptor method if the reset
controller framework is not enabled.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
This patch is followed by eight commits featuring improvements to
the Nomadik controller, such as simplification of the IRQ logic,
renaming of the private data structure, more efficient use of
FIELD_PREP/GET, GENMASK, etc., better time measurement with
ktime, and more.
Two device trees have been added, but those need to be applied
elsewhere.
-----BEGIN PGP SIGNATURE-----
iIwEABYIADQWIQScDfrjQa34uOld1VLaeAVmJtMtbgUCZfLnNBYcYW5kaS5zaHl0
aUBrZXJuZWwub3JnAAoJENp4BWYm0y1uSSkBAKl75gzjiN2AglPaTUDfhCeux8yf
mISgvl4MWKCXXsZ5AQDjRiG+whrV7knOjS7L/r5owb30uF+Bv3d29sG4LVNsBQ==
=RubU
-----END PGP SIGNATURE-----
Merge tag 'i2c-host-6.9-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow
Théo adds support for the Mobileye EyeQ5-I2C in the bindings.
This patch is followed by eight commits featuring improvements to
the Nomadik controller, such as simplification of the IRQ logic,
renaming of the private data structure, more efficient use of
FIELD_PREP/GET, GENMASK, etc., better time measurement with
ktime, and more.
The recent conversion to the automatic kfree() forgot to mark a
variable with __free(kfree), leading to memory leaks. Fix it.
Fixes: 1052d98822 ("ALSA: control: Use automatic cleanup of kfree()")
Reported-by: Mirsad Todorovac <mirsad.todorovac@alu.unizg.hr>
Closes: https://lore.kernel.org/r/c1e2ef3c-164f-4840-9b1c-f7ca07ca422a@alu.unizg.hr
Message-ID: <20240320062722.31325-1-tiwai@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The timerlat tracer provides an interface for any application to wait
for the timerlat's periodic wakeup. Currently, rtla timerlat uses it
to dispatch its user-space workload (-u option).
But as the tracer interface is generic, rtla timerlat can also be used
to monitor any workload that uses it. For example, a user might
place their own workload to wait on the tracer interface, and
monitor the results with rtla timerlat.
Add the -U option to rtla timerlat top and hist. With this option, rtla
timerlat will not dispatch its workload but only setting up the
system, waiting for a user to dispatch its workload.
The sample code in this patch is an example of python application
that loops in the timerlat tracer fd.
To use it, dispatch:
# rtla timerlat -U
In a terminal, then run the python program on another terminal,
specifying the CPU to run it. For example, setting on CPU 1:
#./timerlat_load.py 1
Then rtla timerlat will start printing the statistics of the
./timerlat_load.py app.
An interesting point is that the "Ret user Timer Latency" value
is the overall response time of the load. The sample load does
a memory copy to exemplify that.
The stop tracing options on rtla timerlat works in this setup
as well, including auto analysis.
Link: https://lkml.kernel.org/r/36e6bcf18fe15c7601048fd4c65aeb193c502cc8.1707229706.git.bristot@kernel.org
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Use tools/build/ makefiles to build rv, inheriting the benefits of
it. For example, having a proper way to handle dependencies.
Link: https://lkml.kernel.org/r/2a38a8f7b8dc65fa790381ec9ab42fb62beb2e25.1710519524.git.bristot@kernel.org
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: John Kacur <jkacur@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Use tools/build/ makefiles to build rtla, inheriting the benefits of
it. For example, having a proper way to handle dependencies.
rtla is built using perf infra-structure when building inside the
kernel tree.
At this point, rtla diverges from perf in two points: Documentation
and tarball generation/build.
At the documentation level, rtla is one step ahead, placing the
documentation at Documentation/tools/rtla/, using the same build
tools as kernel documentation. The idea is to move perf
documentation to the same scheme and then share the same makefiles.
rtla has a tarball target that the (old) RHEL8 uses. The tarball was
kept using a simple standalone makefile for compatibility. The
standalone makefile shares most of the code, e.g., flags, with
regular buildings.
The tarball method was set as deprecated. If necessary, we can make
a rtla tarball like perf, which includes the entire tools/build.
But this would also require changes in the user side (the directory
structure changes, and probably the deps to build the package).
Inspired on perf and objtool.
Link: https://lkml.kernel.org/r/57563abf2715d22515c0c54a87cff3849eca5d52.1710519524.git.bristot@kernel.org
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: John Kacur <jkacur@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Use tools/build/ makefiles to build latency-collector, inheriting
the benefits of it. For example: Before this patch, a missing
tracefs/traceevents headers will result in fail like this:
~/linux/tools/tracing/latency $ make
cc -Wall -Wextra -g -O2 -o latency-collector latency-collector.c -lpthread
latency-collector.c:26:10: fatal error: tracefs.h: No such file or directory
26 | #include <tracefs.h>
| ^~~~~~~~~~~
compilation terminated.
make: *** [Makefile:14: latency-collector] Error 1
Which is not that helpful. After this change it reports:
~/linux/tools/tracing/latency# make
Auto-detecting system features:
... libtraceevent: [ OFF ]
... libtracefs: [ OFF ]
libtraceevent is missing. Please install libtraceevent-dev/libtraceevent-devel
libtracefs is missing. Please install libtracefs-dev/libtracefs-devel
Makefile.config:29: *** Please, check the errors above.. Stop.
This type of output is common across other tools in tools/ like perf
and objtool.
Link: https://lkml.kernel.org/r/872420b0880b11304e4ba144a0086c6478c5b469.1710519524.git.bristot@kernel.org
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: John Kacur <jkacur@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Due to a c&p error, port new reply fills-up cmd with wrong value,
any other existing port command replies and notifications.
Fix it by filling cmd with value DEVLINK_CMD_PORT_NEW.
Skimmed through devlink userspace implementations, none of them cares
about this cmd value.
Reported-by: Chenyuan Yang <chenyuan0y@gmail.com>
Closes: https://lore.kernel.org/all/ZfZcDxGV3tSy4qsV@cy-server/
Fixes: cd76dcd68d ("devlink: Support add and delete devlink port")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://lore.kernel.org/r/20240318091908.2736542-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix race condition leading to system crash during EEH error handling
During EEH error recovery, the bnx2x driver's transmit timeout logic
could cause a race condition when handling reset tasks. The
bnx2x_tx_timeout() schedules reset tasks via bnx2x_sp_rtnl_task(),
which ultimately leads to bnx2x_nic_unload(). In bnx2x_nic_unload()
SGEs are freed using bnx2x_free_rx_sge_range(). However, this could
overlap with the EEH driver's attempt to reset the device using
bnx2x_io_slot_reset(), which also tries to free SGEs. This race
condition can result in system crashes due to accessing freed memory
locations in bnx2x_free_rx_sge()
799 static inline void bnx2x_free_rx_sge(struct bnx2x *bp,
800 struct bnx2x_fastpath *fp, u16 index)
801 {
802 struct sw_rx_page *sw_buf = &fp->rx_page_ring[index];
803 struct page *page = sw_buf->page;
....
where sw_buf was set to NULL after the call to dma_unmap_page()
by the preceding thread.
EEH: Beginning: 'slot_reset'
PCI 0011:01:00.0#10000: EEH: Invoking bnx2x->slot_reset()
bnx2x: [bnx2x_io_slot_reset:14228(eth1)]IO slot reset initializing...
bnx2x 0011:01:00.0: enabling device (0140 -> 0142)
bnx2x: [bnx2x_io_slot_reset:14244(eth1)]IO slot reset --> driver unload
Kernel attempted to read user page (0) - exploit attempt? (uid: 0)
BUG: Kernel NULL pointer dereference on read at 0x00000000
Faulting instruction address: 0xc0080000025065fc
Oops: Kernel access of bad area, sig: 11 [#1]
.....
Call Trace:
[c000000003c67a20] [c00800000250658c] bnx2x_io_slot_reset+0x204/0x610 [bnx2x] (unreliable)
[c000000003c67af0] [c0000000000518a8] eeh_report_reset+0xb8/0xf0
[c000000003c67b60] [c000000000052130] eeh_pe_report+0x180/0x550
[c000000003c67c70] [c00000000005318c] eeh_handle_normal_event+0x84c/0xa60
[c000000003c67d50] [c000000000053a84] eeh_event_handler+0xf4/0x170
[c000000003c67da0] [c000000000194c58] kthread+0x1c8/0x1d0
[c000000003c67e10] [c00000000000cf64] ret_from_kernel_thread+0x5c/0x64
To solve this issue, we need to verify page pool allocations before
freeing.
Fixes: 4cace675d6 ("bnx2x: Alloc 4k fragment for each rx ring buffer element")
Signed-off-by: Thinh Tran <thinhtr@linux.ibm.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240315205535.1321-1-thinhtr@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The past form of RISCV_FENCE would cause checkpatch.pl to issue
error messages, the example is as follows:
ERROR: space required after that ',' (ctx:VxV)
26: FILE: arch/riscv/include/asm/barrier.h:27:
+#define __smp_mb() RISCV_FENCE(rw,rw)
^
fix the remaining of RISCV_FENCE.
Signed-off-by: Eric Chan <ericchancf@google.com>
Reviewed-by: Andrea Parri <parri.andrea@gmail.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240217131328.3669364-1-ericchancf@google.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Disparate fence implementations are consolidated into fence.h.
Also introduce RISCV_FENCE_ASM to make fence macro more reusable.
Signed-off-by: Eric Chan <ericchancf@google.com>
Reviewed-by: Andrea Parri <parri.andrea@gmail.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240217131316.3668927-1-ericchancf@google.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Introduce RISCV_FULL_BARRIER and use in arch_atomic* function.
like RISCV_ACQUIRE_BARRIER and RISCV_RELEASE_BARRIER, the fence
instruction can be eliminated When SMP is not enabled.
Signed-off-by: Eric Chan <ericchancf@google.com>
Reviewed-by: Andrea Parri <parri.andrea@gmail.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240217131302.3668481-1-ericchancf@google.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Introduce __{mb,rmb,wmb}, and rely on the generic definitions for
{mb,rmb,wmb}. Although KCSAN is not supported yet, the definitions can
be made more consistent with generic instrumentation. Also add a space
to make the changes pass check by checkpatch.pl.
Without the space, the error message is as below:
ERROR: space required after that ',' (ctx:VxV)
26: FILE: arch/riscv/include/asm/barrier.h:23:
+#define __mb() RISCV_FENCE(iorw,iorw)
^
Signed-off-by: Eric Chan <ericchancf@google.com>
Reviewed-by: Andrea Parri <parri.andrea@gmail.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240217131249.3668103-1-ericchancf@google.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
CONFIG_ACPI_CPPC_CPUFREQ is required to enable CPPC for RISC-V.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20240208034414.22579-4-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
CPPC related config options are currently defined only in ARM specific
file. However, they are required for RISC-V as well. Instead of creating
a new Kconfig.riscv file and duplicating them, move them to the common
Kconfig file and enable RISC-V too.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20240208034414.22579-3-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add cpufreq driver based on ACPI CPPC for RISC-V. The driver uses either
SBI CPPC interfaces or the CSRs to access the CPPC registers as defined
by the RISC-V FFH spec.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20240208034414.22579-2-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The ACPI processor driver is not currently enabled for RISC-V.
This is required to enable CPU related functionalities like
LPI and CPPC. Hence, enable ACPI_PROCESSOR for RISC-V.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20240118062930.245937-4-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Enable Low Power Idle (LPI) based cpuidle driver for RISC-V platforms.
It depends on SBI HSM calls for idle state transitions.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20240118062930.245937-3-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
To support ACPI Low Power Idle (LPI), few functions are required which
are currently static functions in the DT based cpuidle driver. Hence,
move them under arch/riscv so that ACPI driver also can use them. Since
they are no longer static functions, append "riscv_" prefix to the
function name.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20240118062930.245937-2-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Assorted bugfixes.
Most are fixes for simple assertion pops; the most significant fix is
for a deadlock in recovery when we have to rewrite large numbers of
btree nodes to fix errors. This was incorrectly running out of the same
workqueue as the core interior btree update path - we now give it its
own single threaded workqueue.
This was visible to users as "bch2_btree_update_start(): error:
BCH_ERR_journal_reclaim_would_deadlock" - and then recovery hanging.
-----BEGIN PGP SIGNATURE-----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=J/hu
-----END PGP SIGNATURE-----
Merge tag 'bcachefs-2024-03-19' of https://evilpiepirate.org/git/bcachefs
Pull bcachefs fixes from Kent Overstreet:
"Assorted bugfixes.
Most are fixes for simple assertion pops; the most significant fix is
for a deadlock in recovery when we have to rewrite large numbers of
btree nodes to fix errors. This was incorrectly running out of the
same workqueue as the core interior btree update path - we now give it
its own single threaded workqueue.
This was visible to users as "bch2_btree_update_start(): error:
BCH_ERR_journal_reclaim_would_deadlock" - and then recovery hanging"
* tag 'bcachefs-2024-03-19' of https://evilpiepirate.org/git/bcachefs:
bcachefs: Fix lost wakeup on journal shutdown
bcachefs; Fix deadlock in bch2_btree_update_start()
bcachefs: ratelimit errors from async_btree_node_rewrite
bcachefs: Run check_topology() first
bcachefs: Improve bch2_fatal_error()
bcachefs: Fix lost transaction restart error
bcachefs: Don't corrupt journal keys gap buffer when dropping alloc info
bcachefs: fix for building in userspace
bcachefs: bch2_snapshot_is_ancestor() now safe to call in early recovery
bcachefs: Fix nested transaction restart handling in bch2_bucket_gens_init()
bcachefs: Improve sysfs internal/btree_updates
bcachefs: Split out btree_node_rewrite_worker
bcachefs: Fix locking in bch2_alloc_write_key()
bcachefs: Avoid extent entry type assertions in .invalid()
bcachefs: Fix spurious -BCH_ERR_transaction_restart_nested
bcachefs: Fix check_key_has_snapshot() call
bcachefs: Change "accounting overran journal reservation" to a warning
In order to have all task compat bit access directly in compat.h, introduce
set_compat_task() to set/reset those when needed.
Also, since it's only used on an if/else scenario, simplify the macro using
it.
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20240103160024.70305-7-leobras@redhat.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
task_user_regset_view() makes use of a function very similar to
is_compat_task(), but pointing to a any thread.
In arm64 asm/compat.h there is a function very similar to that:
is_compat_thread(struct thread_info *thread)
Copy this function to riscv asm/compat.h and make use of it into
task_user_regset_view().
Also, introduce a compile-time test for CONFIG_COMPAT and simplify the
function code by removing the #ifdef.
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Andy Chiu <andy.chiu@sifive.com>
Link: https://lore.kernel.org/r/20240103160024.70305-6-leobras@redhat.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Currently several places will test for CONFIG_COMPAT before testing
is_compat_task(), probably in order to avoid a run-time test into the task
structure.
Since is_compat_task() is an inlined function, it would be helpful to add a
compile-time test of CONFIG_COMPAT, making sure it always returns zero when
the option is not enabled during the kernel build.
With this, the compiler is able to understand in build-time that
is_compat_task() will always return 0, and optimize-out some of the extra
code introduced by the option.
This will also allow removing a lot #ifdefs that were introduced, and make
the code more clean.
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Andy Chiu <andy.chiu@sifive.com>
Link: https://lore.kernel.org/r/20240103160024.70305-5-leobras@redhat.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
There is some code that detects compat mode into a task by checking the
flag directly, and other code that check using the helper is_compat_task().
Since the helper already exists, use it instead of checking the flags
directly.
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Link: https://lore.kernel.org/r/20240103160024.70305-4-leobras@redhat.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This macro caused me some confusion, which took some reviewer's time to
make it clear, so I propose adding a short comment in code to avoid
confusion in the future.
Also, added some improvements to the macro, such as removing the
assumption of VA_USER_SV57 being the largest address space.
Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20240103160024.70305-3-leobras@redhat.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
ARCH_STARFIVE is not restricted to 64-bit platforms, so while Will's
addition of a 64-bit only condition satisfied the build robots doing
COMPILE_TEST builds, Palmer ran into the same problems with writeq()
being undefined during regular rv32 builds.
Promote the dependency on 64-bit to its own `depends on` so that the
driver can never be included in 32-bit builds.
Reported-by: Palmer Dabbelt <palmer@rivosinc.com>
Fixes: c2b24812f7 ("perf: starfive: Add StarLink PMU support")
Fixes: f0dbc6d0de ("perf: starfive: Only allow COMPILE_TEST for 64-bit architectures")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Ji Sheng Teoh <jisheng.teoh@starfivetech.com>
Acked-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Link: https://lore.kernel.org/r/20240318-emphatic-rally-f177a4fe1bdc@spud
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
These are changes that for some reason ended up not making it into the
first four branches but that should still make it into 6.9:
- A rework of the omap clock support that touches both drivers and
device tree files
- The reset controller branch changes that had a dependency on late
bugfixes. Merging them here avoids a backmerge of 6.8-rc5 into the
drivers branch
- The RISC-V/starfive, RISC-V/microchip and ARM/Broadcom devicetree
changes that got delayed and needed some extra time in linux-next
for wider testing.
-----BEGIN PGP SIGNATURE-----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=IzoE
-----END PGP SIGNATURE-----
Merge tag 'soc-late-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull more ARM SoC updates from Arnd Bergmann:
"These are changes that for some reason ended up not making it into the
first four branches but that should still make it into 6.9:
- A rework of the omap clock support that touches both drivers and
device tree files
- The reset controller branch changes that had a dependency on late
bugfixes. Merging them here avoids a backmerge of 6.8-rc5 into the
drivers branch
- The RISC-V/starfive, RISC-V/microchip and ARM/Broadcom devicetree
changes that got delayed and needed some extra time in linux-next
for wider testing"
* tag 'soc-late-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (31 commits)
soc: fsl: dpio: fix kcalloc() argument order
bus: ts-nbus: Improve error reporting
bus: ts-nbus: Convert to atomic pwm API
riscv: dts: starfive: jh7110: Add camera subsystem nodes
ARM: bcm: stop selecing CONFIG_TICK_ONESHOT
ARM: dts: omap3: Update clksel clocks to use reg instead of ti,bit-shift
ARM: dts: am3: Update clksel clocks to use reg instead of ti,bit-shift
clk: ti: Improve clksel clock bit parsing for reg property
clk: ti: Handle possible address in the node name
dt-bindings: pwm: opencores: Add compatible for StarFive JH8100
dt-bindings: riscv: cpus: reg matches hart ID
reset: Instantiate reset GPIO controller for shared reset-gpios
reset: gpio: Add GPIO-based reset controller
cpufreq: do not open-code of_phandle_args_equal()
of: Add of_phandle_args_equal() helper
reset: simple: add support for Sophgo SG2042
dt-bindings: reset: sophgo: support SG2042
riscv: dts: microchip: add specific compatible for mpfs pdma
riscv: dts: microchip: add missing CAN bus clocks
ARM: brcmstb: Add debug UART entry for 74165
...
- Various virtual vs physical address usage fixes
- Add new bitwise types and helper functions and use them in s390 specific
drivers and code to make it easier to find virtual vs physical address
usage bugs. Right now virtual and physical addresses are identical for
s390, except for module, vmalloc, and similar areas. This will be
changed, hopefully with the next merge window, so that e.g. the kernel
image and modules will be located close to each other, allowing for
direct branches and also for some other simplifications.
As a prerequisite this requires to fix all misuses of virtual and
physical addresses. As it turned out people are so used to the concept
that virtual and physical addresses are the same, that new bugs got added
to code which was already fixed. In order to avoid that even more code
gets merged which adds such bugs add and use new bitwise types, so that
sparse can be used to find such usage bugs.
Most likely the new types can go away again after some time
- Provide a simple ARCH_HAS_DEBUG_VIRTUAL implementation
- Fix kprobe branch handling: if an out-of-line single stepped relative
branch instruction has a target address within a certain address area in
the entry code, the program check handler may incorrectly execute cleanup
code as if KVM code was executed, leading to crashes
- Fix reference counting of zcrypt card objects
- Various other small fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=Vh2x
-----END PGP SIGNATURE-----
Merge tag 's390-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Heiko Carstens:
- Various virtual vs physical address usage fixes
- Add new bitwise types and helper functions and use them in s390
specific drivers and code to make it easier to find virtual vs
physical address usage bugs.
Right now virtual and physical addresses are identical for s390,
except for module, vmalloc, and similar areas. This will be changed,
hopefully with the next merge window, so that e.g. the kernel image
and modules will be located close to each other, allowing for direct
branches and also for some other simplifications.
As a prerequisite this requires to fix all misuses of virtual and
physical addresses. As it turned out people are so used to the
concept that virtual and physical addresses are the same, that new
bugs got added to code which was already fixed. In order to avoid
that even more code gets merged which adds such bugs add and use new
bitwise types, so that sparse can be used to find such usage bugs.
Most likely the new types can go away again after some time
- Provide a simple ARCH_HAS_DEBUG_VIRTUAL implementation
- Fix kprobe branch handling: if an out-of-line single stepped relative
branch instruction has a target address within a certain address area
in the entry code, the program check handler may incorrectly execute
cleanup code as if KVM code was executed, leading to crashes
- Fix reference counting of zcrypt card objects
- Various other small fixes and cleanups
* tag 's390-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (41 commits)
s390/entry: compare gmap asce to determine guest/host fault
s390/entry: remove OUTSIDE macro
s390/entry: add CIF_SIE flag and remove sie64a() address check
s390/cio: use while (i--) pattern to clean up
s390/raw3270: make class3270 constant
s390/raw3270: improve raw3270_init() readability
s390/tape: make tape_class constant
s390/vmlogrdr: make vmlogrdr_class constant
s390/vmur: make vmur_class constant
s390/zcrypt: make zcrypt_class constant
s390/mm: provide simple ARCH_HAS_DEBUG_VIRTUAL support
s390/vfio_ccw_cp: use new address translation helpers
s390/iucv: use new address translation helpers
s390/ctcm: use new address translation helpers
s390/lcs: use new address translation helpers
s390/qeth: use new address translation helpers
s390/zfcp: use new address translation helpers
s390/tape: fix virtual vs physical address confusion
s390/3270: use new address translation helpers
s390/3215: use new address translation helpers
...
The two example echo commands for binding the spidev driver were being
rendered as one line in the HTML output. This patch makes use of the
restructured text :: to format the commands as a code block instead
which preserves the line break.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://msgid.link/r/20240319183344.2106335-1-dlechner@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As __assign_str() no longer uses its "src" parameter, there's a check to
make sure nothing depends on it being different than what was passed to
__string(). It originally just compared the pointer passed to __string()
with the pointer passed into __assign_str() via the "src" parameter. But
there's a couple of outliers that just pass in a quoted string constant,
where comparing the pointers is UB to the compiler, as the compiler is
free to create multiple copies of the same string constant.
Instead, just use strcmp(). It may slow down the trace event, but this
will eventually be removed.
Also, fix the issue of passing NULL to strcmp() by adding a WARN_ON() to
make sure that both "src" and the pointer saved in __string() are either
both NULL or have content, and then checking if "src" is not NULL before
performing the strcmp().
Link: https://lore.kernel.org/all/CAHk-=wjxX16kWd=uxG5wzqt=aXoYDf1BgWOKk+qVmAO0zh7sjA@mail.gmail.com/
Fixes: b1afefa62c ("tracing: Use strcmp() in __assign_str() WARN_ON() check")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Modify the Energy Model code to bail out and complain if the unit of
power is not uW to prevent errors due to unit mismatches (Lukasz Luba).
- Make the intel_rapl platform driver use a remove callback returning
void (Uwe Kleine-König).
- Fix typo in the suspend and interrupts document (Saravana Kannan).
- Make per-policy boost flags actually take effect on platforms using
cpufreq_boost_set_sw() (Sibi Sankar).
- Enable boost support in the SCMI cpufreq driver (Sibi Sankar).
- Make the DT cpufreq driver use zalloc_cpumask_var() for allocating
cpumasks to avoid using unitinialized memory (Marek Szyprowski).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmX5iRASHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxof8P/R+MrENvw2bIe5VGwqX99Nd47spbAe2J
QchuY8R9RIhd4laJ74C+Nc7E1rawLukLHctVql1QzkygldyriAjhHnVeL98Tmh8C
H+2928BEztPzbIzLMQ7uAVKY+iUD9BfTipPwqV6D118nswtRUbubQkLtrKAmssHQ
Sm5BqYmEb91CiSIe9wjqCyfc7kq7ina7nqmGa7DgZNMUgCzjmAEDRz1vXV1oRjNl
aIXpx9X1wtG699HRCXBkxt7SbgXN3bFim6ZFoTvxT4U2Rhcj9JJ/PxKufFL2vuGF
1M99eu1aMqL0iS3vhj4k88uPG5kDv37qIFYD6Z2vqRVTy040fL+6Sny5IKMlQb+Z
PUB/TT1rulhH4kCjhkJXuErLqMBG2Ujf8D4drosQK2avp20pF0TCm2h+0LX3HVXM
dcv+WirjOyljygWm4D0XyvY6U88gcKiGGY/Qf7YQ/GC8Jyrj0h6qMvDw38725XU+
VQ0JlYCoM1R24dT4iYWWrMbvK6pEQ5R9lwJNSgdtQWOFNmyQy8j8s7D4qyRrCdG/
JERwNIi+NF3oezg3ahF8s9cemnkndqxlqX1atMmjL9WCbqUPl2LCxJ7TWM5H/mfg
/h3jNk9ai6d2cHStvoxFzbAYqZX/72IVEteOomKKiHdW7lxWUW+J2xZRy0Pv0163
iNNyshJAsuaf
=dlQ/
-----END PGP SIGNATURE-----
Merge tag 'pm-6.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These update the Energy Model to make it prevent errors due to power
unit mismatches, fix a typo in power management documentation, convert
one driver to using a platform remove callback returning void, address
two cpufreq issues (one in the core and one in the DT driver), and
enable boost support in the SCMI cpufreq driver.
Specifics:
- Modify the Energy Model code to bail out and complain if the unit
of power is not uW to prevent errors due to unit mismatches (Lukasz
Luba)
- Make the intel_rapl platform driver use a remove callback returning
void (Uwe Kleine-König)
- Fix typo in the suspend and interrupts document (Saravana Kannan)
- Make per-policy boost flags actually take effect on platforms using
cpufreq_boost_set_sw() (Sibi Sankar)
- Enable boost support in the SCMI cpufreq driver (Sibi Sankar)
- Make the DT cpufreq driver use zalloc_cpumask_var() for allocating
cpumasks to avoid using unitinialized memory (Marek Szyprowski)"
* tag 'pm-6.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: scmi: Enable boost support
firmware: arm_scmi: Add support for marking certain frequencies as turbo
cpufreq: dt: always allocate zeroed cpumask
cpufreq: Fix per-policy boost behavior on SoCs using cpufreq_boost_set_sw()
Documentation: power: Fix typo in suspend and interrupts doc
PM: EM: Force device drivers to provide power in uW
powercap: intel_rapl: Convert to platform remove callback returning void
- Add markup to generate links from footnotes in the ACPI enumeration
document (Chris Packham).
- Update the handle_eject_request() kerneldoc comment to document the
arguments of the function and improve kerneldoc comments for ACPI
suspend and hibernation functions (Yang Li).
-----BEGIN PGP SIGNATURE-----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=nafx
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These update ACPI documentation and kerneldoc comments.
Specifics:
- Add markup to generate links from footnotes in the ACPI enumeration
document (Chris Packham)
- Update the handle_eject_request() kerneldoc comment to document the
arguments of the function and improve kerneldoc comments for ACPI
suspend and hibernation functions (Yang Li)"
* tag 'acpi-6.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PM: Improve kerneldoc comments for suspend and hibernation functions
ACPI: docs: enumeration: Make footnotes links
ACPI: Document handle_eject_request() arguments
- Fix memory leak in the error path at probe time in the Mediatek LVTS
driver (Christophe Jaillet).
- Fix control buffer enablement regression on Meditek MT7896 (Frank
Wunderlich).
- Drop spaces before TABs in different places: thermal-of, ST drivers
and Makefile (Geert Uytterhoeven).
- Adjust DT binding for NXP as fsl,tmu-range min/maxItems can vary
among several SoC versions (Fabio Estevam).
- Add support for the H616 THS controller on Sun8i platforms (Martin
Botka).
- Don't fail probe due to zone registration failure because there is
no trip points defined in the DT (Mark Brown).
- Support variable TMU array size for new platforms (Peng Fan).
- Adjust the DT binding for thermal-of and make the polling time not
required and assume it is zero when not found in the DT (Konrad
Dybcio).
- Add r8a779h0 support in both the DT and the rcar_gen3 driver (Geert
Uytterhoeven).
-----BEGIN PGP SIGNATURE-----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=jtjA
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more thermal control updates from Rafael Wysocki:
"These update thermal drivers for ARM platforms by adding new hardware
support (r8a779h0, H616 THS), addressing issues (Mediatek LVTS,
Mediatek MT7896, thermal-of) and cleaning up code.
Specifics:
- Fix memory leak in the error path at probe time in the Mediatek
LVTS driver (Christophe Jaillet)
- Fix control buffer enablement regression on Meditek MT7896 (Frank
Wunderlich)
- Drop spaces before TABs in different places: thermal-of, ST drivers
and Makefile (Geert Uytterhoeven)
- Adjust DT binding for NXP as fsl,tmu-range min/maxItems can vary
among several SoC versions (Fabio Estevam)
- Add support for the H616 THS controller on Sun8i platforms (Martin
Botka)
- Don't fail probe due to zone registration failure because there is
no trip points defined in the DT (Mark Brown)
- Support variable TMU array size for new platforms (Peng Fan)
- Adjust the DT binding for thermal-of and make the polling time not
required and assume it is zero when not found in the DT (Konrad
Dybcio)
- Add r8a779h0 support in both the DT and the rcar_gen3 driver (Geert
Uytterhoeven)"
* tag 'thermal-6.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/drivers/rcar_gen3: Add support for R-Car V4M
dt-bindings: thermal: rcar-gen3-thermal: Add r8a779h0 support
thermal/of: Assume polling-delay(-passive) 0 when absent
dt-bindings: thermal-zones: Don't require polling-delay(-passive)
thermal/drivers/qoriq: Fix getting tmu range
thermal/drivers/sun8i: Don't fail probe due to zone registration failure
thermal/drivers/sun8i: Add support for H616 THS controller
thermal/drivers/sun8i: Add SRAM register access code
thermal/drivers/sun8i: Extend H6 calibration to support 4 sensors
thermal/drivers/sun8i: Explain unknown H6 register value
dt-bindings: thermal: sun8i: Add H616 THS controller
soc: sunxi: sram: export register 0 for THS on H616
dt-bindings: thermal: qoriq-thermal: Adjust fsl,tmu-range min/maxItems
thermal: Drop spaces before TABs
thermal/drivers/mediatek: Fix control buffer enablement on MT7896
thermal/drivers/mediatek/lvts_thermal: Fix a memory leak in an error handling path
- A single fix for ASMedia HBAs.
These HBAs do not indicate that they support SATA Port Multipliers
CAP.SPM (Supports Port Multiplier) is not set.
Likewise, they do not allow you to probe the devices behind an
attached PMP, as defined according to the SATA-IO PMP specification.
Instead, they have decided to implement their own version of PMP,
and because of this, plugging in a PMP actually works, even if the
HBA claims that it does not support PMP.
Revert a recent quirk for these HBAs, as that breaks ASMedia's own
implementation of PMP.
Unfortunately, this will once again give some users of these HBAs
significantly increased boot time. However, a longer boot time for
some, is the lesser evil compared to some other users not being able
to detect their drives at all.
-----BEGIN PGP SIGNATURE-----
iIgEABYKADAWIQRN+ES/c4tHlMch3DzJZDGjmcZNcgUCZfl1DxIcY2Fzc2VsQGtl
cm5lbC5vcmcACgkQyWQxo5nGTXLbfgD/YSHXSMFTch4waFnTVqbI73s8YY7MAf3N
Udis3pXUnL4A/24OxmRaWvE3esgura1puHbMUxgQuFSoxqiF+W47iGcJ
=JrQQ
-----END PGP SIGNATURE-----
Merge tag 'ata-6.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata fix from Niklas Cassel:
"A single fix for ASMedia HBAs.
These HBAs do not indicate that they support SATA Port Multipliers
CAP.SPM (Supports Port Multiplier) is not set.
Likewise, they do not allow you to probe the devices behind an
attached PMP, as defined according to the SATA-IO PMP specification.
Instead, they have decided to implement their own version of PMP,
and because of this, plugging in a PMP actually works, even if the
HBA claims that it does not support PMP.
Revert a recent quirk for these HBAs, as that breaks ASMedia's own
implementation of PMP.
Unfortunately, this will once again give some users of these HBAs
significantly increased boot time. However, a longer boot time for
some, is the lesser evil compared to some other users not being able
to detect their drives at all"
* tag 'ata-6.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ahci: asm1064: asm1166: don't limit reported ports
Per vq sizes in vdpa.
Info query for block devices support in vdpa.
DMA sync callbacks in vduse.
Fixes, cleanups.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmX5PdQPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRphP0H/iOUdjemA73k0+E1tX0fIrvTlgJcX4fT/nGn
bgFmV/52zBnTxEXse5sMoTPbpzU8omx88vuVzd9f1X6Uv1MpG8cpHIA0HDKbIxZo
vItLeSv5IacA1KBXfxXvf9069aCnEEdurvE+uAO+x8ngbG4FH3i63Yp0S3nMXYMr
Bl6V11pyusnLpW5HO0LAlETJRxz/3K4Z248LtTx19zzlIfmz+tKmUXozrocmD6Q9
Q1LAWCPKksUXj7t9zc2M92ZqUdSX8JQJpolWZi76MHlrh69YkAJ3gijtNIJv5tJB
Z17zhLUkhdy4b/6rdGlUK/T7bocYLU4fbRaM5xlsDhTWe2z3R1Q=
=Gde9
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
- Per vq sizes in vdpa
- Info query for block devices support in vdpa
- DMA sync callbacks in vduse
- Fixes, cleanups
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (35 commits)
virtio_net: rename free_old_xmit_skbs to free_old_xmit
virtio_net: unify the code for recycling the xmit ptr
virtio-net: add cond_resched() to the command waiting loop
virtio-net: convert rx mode setting to use workqueue
virtio: packed: fix unmap leak for indirect desc table
vDPA: report virtio-blk flush info to user space
vDPA: report virtio-block read-only info to user space
vDPA: report virtio-block write zeroes configuration to user space
vDPA: report virtio-block discarding configuration to user space
vDPA: report virtio-block topology info to user space
vDPA: report virtio-block MQ info to user space
vDPA: report virtio-block max segments in a request to user space
vDPA: report virtio-block block-size to user space
vDPA: report virtio-block max segment size to user space
vDPA: report virtio-block capacity to user space
virtio: make virtio_bus const
vdpa: make vdpa_bus const
vDPA/ifcvf: implement vdpa_config_ops.get_vq_num_min
vDPA/ifcvf: get_max_vq_size to return max size
virtio_vdpa: create vqs with the actual size
...
