mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-21 01:54:51 +08:00
c057c799e3
844 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
David Howells
|
9d37e1cab2 |
afs: Fix updating of i_blocks on file/dir extension
When an afs file or directory is modified locally such that the total file size is extended, i_blocks needs to be recalculated too. Fix this by making afs_write_end() and afs_edit_dir_add() call afs_set_i_size() rather than setting inode->i_size directly as that also recalculates inode->i_blocks. This can be tested by creating and writing into directories and files and then examining them with du. Without this change, directories show a 4 blocks (they start out at 2048 bytes) and files show 0 blocks; with this change, they should show a number of blocks proportional to the file size rounded up to 1024. Fixes: |
||
|
David Howells
|
b537a3c217 |
afs: Fix corruption in reads at fpos 2G-4G from an OpenAFS server
AFS-3 has two data fetch RPC variants, FS.FetchData and FS.FetchData64, and
Linux's afs client switches between them when talking to a non-YFS server
if the read size, the file position or the sum of the two have the upper 32
bits set of the 64-bit value.
This is a problem, however, since the file position and length fields of
FS.FetchData are *signed* 32-bit values.
Fix this by capturing the capability bits obtained from the fileserver when
it's sent an FS.GetCapabilities RPC, rather than just discarding them, and
then picking out the VICED_CAPABILITY_64BITFILES flag. This can then be
used to decide whether to use FS.FetchData or FS.FetchData64 - and also
FS.StoreData or FS.StoreData64 - rather than using upper_32_bits() to
switch on the parameter values.
This capabilities flag could also be used to limit the maximum size of the
file, but all servers must be checked for that.
Note that the issue does not exist with FS.StoreData - that uses *unsigned*
32-bit values. It's also not a problem with Auristor servers as its
YFS.FetchData64 op uses unsigned 64-bit values.
This can be tested by cloning a git repo through an OpenAFS client to an
OpenAFS server and then doing "git status" on it from a Linux afs
client[1]. Provided the clone has a pack file that's in the 2G-4G range,
the git status will show errors like:
error: packfile .git/objects/pack/pack-5e813c51d12b6847bbc0fcd97c2bca66da50079c.pack does not match index
error: packfile .git/objects/pack/pack-5e813c51d12b6847bbc0fcd97c2bca66da50079c.pack does not match index
This can be observed in the server's FileLog with something like the
following appearing:
Sun Aug 29 19:31:39 2021 SRXAFS_FetchData, Fid = 2303380852.491776.3263114, Host 192.168.11.201:7001, Id 1001
Sun Aug 29 19:31:39 2021 CheckRights: len=0, for host=192.168.11.201:7001
Sun Aug 29 19:31:39 2021 FetchData_RXStyle: Pos 18446744071815340032, Len 3154
Sun Aug 29 19:31:39 2021 FetchData_RXStyle: file size 2400758866
...
Sun Aug 29 19:31:40 2021 SRXAFS_FetchData returns 5
Note the file position of 18446744071815340032. This is the requested file
position sign-extended.
Fixes:
|
||
|
David Howells
|
4fe6a94682 |
afs: Try to avoid taking RCU read lock when checking vnode validity
Try to avoid taking the RCU read lock when checking the validity of a
vnode's callback state. The only thing it's needed for is to pin the
parent volume's server list whilst we search it to find the record of the
server we're currently using to see if it has been reinitialised (ie. it
sent us a CB.InitCallBackState* RPC).
Do this by the following means:
(1) Keep an additional per-cell counter (fs_s_break) that's incremented
each time any of the fileservers in the cell reinitialises.
Since the new counter can be accessed without RCU from the vnode, we
can check that first - and only if it differs, get the RCU read lock
and check the volume's server list.
(2) Replace afs_get_s_break_rcu() with afs_check_server_good() which now
indicates whether the callback promise is still expected to be present
on the server. This does the checks as described in (1).
(3) Restructure afs_check_validity() to take account of the change in (2).
We can also get rid of the valid variable and just use the need_clear
variable with the addition of the afs_cb_break_no_promise reason.
(4) afs_check_validity() probably shouldn't be altering vnode->cb_v_break
and vnode->cb_s_break when it doesn't have cb_lock exclusively locked.
Move the change to vnode->cb_v_break to __afs_break_callback().
Delegate the change to vnode->cb_s_break to afs_select_fileserver()
and set vnode->cb_fs_s_break there also.
(5) afs_validate() no longer needs to get the RCU read lock around its
call to afs_check_validity() - and can skip the call entirely if we
don't have a promise.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Markus Suvanto <markus.suvanto@gmail.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/163111669583.283156.1397603105683094563.stgit@warthog.procyon.org.uk/
|
||
|
David Howells
|
6e0e99d58a |
afs: Fix mmap coherency vs 3rd-party changes
Fix the coherency management of mmap'd data such that 3rd-party changes
become visible as soon as possible after the callback notification is
delivered by the fileserver. This is done by the following means:
(1) When we break a callback on a vnode specified by the CB.CallBack call
from the server, we queue a work item (vnode->cb_work) to go and
clobber all the PTEs mapping to that inode.
This causes the CPU to trip through the ->map_pages() and
->page_mkwrite() handlers if userspace attempts to access the page(s)
again.
(Ideally, this would be done in the service handler for CB.CallBack,
but the server is waiting for our reply before considering, and we
have a list of vnodes, all of which need breaking - and the process of
getting the mmap_lock and stripping the PTEs on all CPUs could be
quite slow.)
(2) Call afs_validate() from the ->map_pages() handler to check to see if
the file has changed and to get a new callback promise from the
server.
Also handle the fileserver telling us that it's dropping all callbacks,
possibly after it's been restarted by sending us a CB.InitCallBackState*
call by the following means:
(3) Maintain a per-cell list of afs files that are currently mmap'd
(cell->fs_open_mmaps).
(4) Add a work item to each server that is invoked if there are any open
mmaps when CB.InitCallBackState happens. This work item goes through
the aforementioned list and invokes the vnode->cb_work work item for
each one that is currently using this server.
This causes the PTEs to be cleared, causing ->map_pages() or
->page_mkwrite() to be called again, thereby calling afs_validate()
again.
I've chosen to simply strip the PTEs at the point of notification reception
rather than invalidate all the pages as well because (a) it's faster, (b)
we may get a notification for other reasons than the data being altered (in
which case we don't want to clobber the pagecache) and (c) we need to ask
the server to find out - and I don't want to wait for the reply before
holding up userspace.
This was tested using the attached test program:
#include <stdbool.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <fcntl.h>
#include <sys/mman.h>
int main(int argc, char *argv[])
{
size_t size = getpagesize();
unsigned char *p;
bool mod = (argc == 3);
int fd;
if (argc != 2 && argc != 3) {
fprintf(stderr, "Format: %s <file> [mod]\n", argv[0]);
exit(2);
}
fd = open(argv[1], mod ? O_RDWR : O_RDONLY);
if (fd < 0) {
perror(argv[1]);
exit(1);
}
p = mmap(NULL, size, mod ? PROT_READ|PROT_WRITE : PROT_READ,
MAP_SHARED, fd, 0);
if (p == MAP_FAILED) {
perror("mmap");
exit(1);
}
for (;;) {
if (mod) {
p[0]++;
msync(p, size, MS_ASYNC);
fsync(fd);
}
printf("%02x", p[0]);
fflush(stdout);
sleep(1);
}
}
It runs in two modes: in one mode, it mmaps a file, then sits in a loop
reading the first byte, printing it and sleeping for a second; in the
second mode it mmaps a file, then sits in a loop incrementing the first
byte and flushing, then printing and sleeping.
Two instances of this program can be run on different machines, one doing
the reading and one doing the writing. The reader should see the changes
made by the writer, but without this patch, they aren't because validity
checking is being done lazily - only on entry to the filesystem.
Testing the InitCallBackState change is more complicated. The server has
to be taken offline, the saved callback state file removed and then the
server restarted whilst the reading-mode program continues to run. The
client machine then has to poke the server to trigger the InitCallBackState
call.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Markus Suvanto <markus.suvanto@gmail.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/163111668833.283156.382633263709075739.stgit@warthog.procyon.org.uk/
|
||
|
David Howells
|
63d49d843e |
afs: Fix incorrect triggering of sillyrename on 3rd-party invalidation
The AFS filesystem is currently triggering the silly-rename cleanup from
afs_d_revalidate() when it sees that a dentry has been changed by a third
party[1]. It should not be doing this as the cleanup includes deleting the
silly-rename target file on iput.
Fix this by removing the places in the d_revalidate handling that validate
anything other than the directory and the dirent. It probably should not
be looking to validate the target inode of the dentry also.
This includes removing the point in afs_d_revalidate() where the inode that
a dentry used to point to was marked as being deleted (AFS_VNODE_DELETED).
We don't know it got deleted. It could have been renamed or it could have
hard links remaining.
This was reproduced by cloning a git repo onto an afs volume on one
machine, switching to another machine and doing "git status", then
switching back to the first and doing "git status". The second status
would show weird output due to ".git/index" getting deleted by the above
mentioned mechanism.
A simpler way to do it is to do:
machine 1: touch a
machine 2: touch b; mv -f b a
machine 1: stat a
on an afs volume. The bug shows up as the stat failing with ENOENT and the
file server log showing that machine 1 deleted "a".
Fixes:
|
||
|
David Howells
|
3978d81652 |
afs: Add missing vnode validation checks
afs_d_revalidate() should only be validating the directory entry it is given and the directory to which that belongs; it shouldn't be validating the inode/vnode to which that dentry points. Besides, validation need to be done even if we don't call afs_d_revalidate() - which might be the case if we're starting from a file descriptor. In order for afs_d_revalidate() to be fixed, validation points must be added in some other places. Certain directory operations, such as afs_unlink(), already check this, but not all and not all file operations either. Note that the validation of a vnode not only checks to see if the attributes we have are correct, but also gets a promise from the server to notify us if that file gets changed by a third party. Add the following checks: - Check the vnode we're going to make a hard link to. - Check the vnode we're going to move/rename. - Check the vnode we're going to read from. - Check the vnode we're going to write to. - Check the vnode we're going to sync. - Check the vnode we're going to make a mapped page writable for. Some of these aren't strictly necessary as we're going to perform a server operation that might get the attributes anyway from which we can determine if something changed - though it might not get us a callback promise. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Markus Suvanto <markus.suvanto@gmail.com> cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/163111667354.283156.12720698333342917516.stgit@warthog.procyon.org.uk/ |
||
|
David Howells
|
581b2027af |
afs: Fix page leak
There's a loop in afs_extend_writeback() that adds extra pages to a write
we want to make to improve the efficiency of the writeback by making it
larger. This loop stops, however, if we hit a page we can't write back
from immediately, but it doesn't get rid of the page ref we speculatively
acquired.
This was caused by the removal of the cleanup loop when the code switched
from using find_get_pages_contig() to xarray scanning as the latter only
gets a single page at a time, not a batch.
Fix this by putting the page on a ref on an early break from the loop.
Unfortunately, we can't just add that page to the pagevec we're employing
as we'll go through that and add those pages to the RPC call.
This was found by the generic/074 test. It leaks ~4GiB of RAM each time it
is run - which can be observed with "top".
Fixes:
|
||
|
David Howells
|
345e1ae0c6 |
afs: Fix missing put on afs_read objects and missing get on the key therein
The afs_read objects created by afs_req_issue_op() get leaked because
afs_alloc_read() returns a ref and then afs_fetch_data() gets its own ref
which is released when the operation completes, but the initial ref is
never released.
Fix this by discarding the initial ref at the end of afs_req_issue_op().
This leak also covered another bug whereby a ref isn't got on the key
attached to the read record by afs_req_issue_op(). This isn't a problem as
long as the afs_read req never goes away...
Fix this by calling key_get() in afs_req_issue_op().
This was found by the generic/074 test. It leaks a bunch of kmalloc-192
objects each time it is run, which can be observed by watching
/proc/slabinfo.
Fixes: f7605fa869cf ("afs: Fix leak of afs_read objects")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-and-tested-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/163010394740.3035676.8516846193899793357.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/163111665914.283156.3038561975681836591.stgit@warthog.procyon.org.uk/
|
||
Jeff Layton
|
f7e33bdbd6 |
fs: remove mandatory file locking support
We added CONFIG_MANDATORY_FILE_LOCKING in 2015, and soon after turned it off in Fedora and RHEL8. Several other distros have followed suit. I've heard of one problem in all that time: Someone migrated from an older distro that supported "-o mand" to one that didn't, and the host had a fstab entry with "mand" in it which broke on reboot. They didn't actually _use_ mandatory locking so they just removed the mount option and moved on. This patch rips out mandatory locking support wholesale from the kernel, along with the Kconfig option and the Documentation file. It also changes the mount code to ignore the "mand" mount option instead of erroring out, and to throw a big, ugly warning. Signed-off-by: Jeff Layton <jlayton@kernel.org> |
||
Jiapeng Chong
|
b428081282 |
afs: Remove redundant assignment to ret
Variable ret is set to -ENOENT and -ENOMEM but this value is never
read as it is overwritten or not used later on, hence it is a
redundant assignment and can be removed.
Cleans up the following clang-analyzer warning:
fs/afs/dir.c:2014:4: warning: Value stored to 'ret' is never read
[clang-analyzer-deadcode.DeadStores].
fs/afs/dir.c:659:2: warning: Value stored to 'ret' is never read
[clang-analyzer-deadcode.DeadStores].
[DH made the following modifications:
- In afs_rename(), -ENOMEM should be placed in op->error instead of ret,
rather than the assignment being removed entirely. afs_put_operation()
will pick it up from there and return it.
- If afs_sillyrename() fails, its error code should be placed in op->error
rather than in ret also.
]
Fixes:
|
||
|
David Howells
|
5a972474cf |
afs: Fix setting of writeback_index
Fix afs_writepages() to always set mapping->writeback_index to a page index
and not a byte position[1].
Fixes:
|
||
Tom Rix
|
afe6949862 |
afs: check function return
Static analysis reports this problem
write.c:773:29: warning: Assigned value is garbage or undefined
mapping->writeback_index = next;
^ ~~~~
The call to afs_writepages_region() can return without setting
next. So check the function return before using next.
Changes:
ver #2:
- Need to fix the range_cyclic case also[1].
Fixes:
|
||
|
David Howells
|
6c881ca0b3 |
afs: Fix tracepoint string placement with built-in AFS
To quote Alexey[1]:
I was adding custom tracepoint to the kernel, grabbed full F34 kernel
.config, disabled modules and booted whole shebang as VM kernel.
Then did
perf record -a -e ...
It crashed:
general protection fault, probably for non-canonical address 0x435f5346592e4243: 0000 [#1] SMP PTI
CPU: 1 PID: 842 Comm: cat Not tainted 5.12.6+ #26
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
RIP: 0010:t_show+0x22/0xd0
Then reproducer was narrowed to
# cat /sys/kernel/tracing/printk_formats
Original F34 kernel with modules didn't crash.
So I started to disable options and after disabling AFS everything
started working again.
The root cause is that AFS was placing char arrays content into a
section full of _pointers_ to strings with predictable consequences.
Non canonical address 435f5346592e4243 is "CB.YFS_" which came from
CM_NAME macro.
Steps to reproduce:
CONFIG_AFS=y
CONFIG_TRACING=y
# cat /sys/kernel/tracing/printk_formats
Fix this by the following means:
(1) Add enum->string translation tables in the event header with the AFS
and YFS cache/callback manager operations listed by RPC operation ID.
(2) Modify the afs_cb_call tracepoint to print the string from the
translation table rather than using the string at the afs_call name
pointer.
(3) Switch translation table depending on the service we're being accessed
as (AFS or YFS) in the tracepoint print clause. Will this cause
problems to userspace utilities?
Note that the symbolic representation of the YFS service ID isn't
available to this header, so I've put it in as a number. I'm not sure
if this is the best way to do this.
(4) Remove the name wrangling (CM_NAME) macro and put the names directly
into the afs_call_type structs in cmservice.c.
Fixes:
|
||
Linus Torvalds
|
9e736cf7d6 |
netfslib fixes
-----BEGIN PGP SIGNATURE-----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=2c6l
-----END PGP SIGNATURE-----
Merge tag 'netfs-fixes-20210621' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull netfs fixes from David Howells:
"This contains patches to fix netfs_write_begin() and afs_write_end()
in the following ways:
(1) In netfs_write_begin(), extract the decision about whether to skip
a page out to its own helper and have that clear around the region
to be written, but not clear that region. This requires the
filesystem to patch it up afterwards if the hole doesn't get
completely filled.
(2) Use offset_in_thp() in (1) rather than manually calculating the
offset into the page.
(3) Due to (1), afs_write_end() now needs to handle short data write
into the page by generic_perform_write(). I've adopted an
analogous approach to ceph of just returning 0 in this case and
letting the caller go round again.
It also adds a note that (in the future) the len parameter may extend
beyond the page allocated. This is because the page allocation is
deferred to write_begin() and that gets to decide what size of THP to
allocate."
Jeff Layton points out:
"The netfs fix in particular fixes a data corruption bug in cephfs"
* tag 'netfs-fixes-20210621' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
netfs: fix test for whether we can skip read when writing beyond EOF
afs: Fix afs_write_end() to handle short writes
|
||
|
David Howells
|
66e9c6a86b |
afs: Fix afs_write_end() to handle short writes
Fix afs_write_end() to correctly handle a short copy into the intended
write region of the page. Two things are necessary:
(1) If the page is not up to date, then we should just return 0
(ie. indicating a zero-length copy). The loop in
generic_perform_write() will go around again, possibly breaking up the
iterator into discrete chunks[1].
This is analogous to commit
|
||
Matthew Wilcox (Oracle)
|
9620ad86d0 |
afs: Re-enable freezing once a page fault is interrupted
If a task is killed during a page fault, it does not currently call
sb_end_pagefault(), which means that the filesystem cannot be frozen
at any time thereafter. This may be reported by lockdep like this:
====================================
WARNING: fsstress/10757 still has locks held!
5.13.0-rc4-build4+ #91 Not tainted
------------------------------------
1 lock held by fsstress/10757:
#0: ffff888104eac530
(
sb_pagefaults
as filesystem freezing is modelled as a lock.
Fix this by removing all the direct returns from within the function,
and using 'ret' to indicate whether we were interrupted or successful.
Fixes:
|
||
Dan Carpenter
|
a33d62662d |
afs: Fix an IS_ERR() vs NULL check
The proc_symlink() function returns NULL on error, it doesn't return
error pointers.
Fixes:
|
||
Marc Dionne
|
dc2557308e |
afs: Fix partial writeback of large files on fsync and close
In commit |
||
|
David Howells
|
f610a5a29c |
afs: Fix the nlink handling of dir-over-dir rename
Fix rename of one directory over another such that the nlink on the deleted
directory is cleared to 0 rather than being decremented to 1.
This was causing the generic/035 xfstest to fail.
Fixes:
|
||
Gustavo A. R. Silva
|
b2db6c35ba |
afs: Fix fall-through warnings for Clang
In preparation to enable -Wimplicit-fallthrough for Clang, fix multiple warnings by explicitly adding multiple fallthrough pseudo-keywords in places where the code is intended to fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-hardening@vger.kernel.org Link: https://lore.kernel.org/r/51150b54e0b0431a2c401cd54f2c4e7f50e94601.1605896059.git.gustavoars@kernel.org/ # v1 Link: https://lore.kernel.org/r/20210420211615.GA51432@embeddedor/ # v2 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
David Howells
|
22650f1481 |
afs: Fix speculative status fetches
The generic/464 xfstest causes kAFS to emit occasional warnings of the
form:
kAFS: vnode modified {100055:8a} 30->31 YFS.StoreData64 (c=6015)
This indicates that the data version received back from the server did not
match the expected value (the DV should be incremented monotonically for
each individual modification op committed to a vnode).
What is happening is that a lookup call is doing a bulk status fetch
speculatively on a bunch of vnodes in a directory besides getting the
status of the vnode it's actually interested in. This is racing with a
StoreData operation (though it could also occur with, say, a MakeDir op).
On the client, a modification operation locks the vnode, but the bulk
status fetch only locks the parent directory, so no ordering is imposed
there (thereby avoiding an avenue to deadlock).
On the server, the StoreData op handler doesn't lock the vnode until it's
received all the request data, and downgrades the lock after committing the
data until it has finished sending change notifications to other clients -
which allows the status fetch to occur before it has finished.
This means that:
- a status fetch can access the target vnode either side of the exclusive
section of the modification
- the status fetch could start before the modification, yet finish after,
and vice-versa.
- the status fetch and the modification RPCs can complete in either order.
- the status fetch can return either the before or the after DV from the
modification.
- the status fetch might regress the locally cached DV.
Some of these are handled by the previous fix[1], but that's not sufficient
because it checks the DV it received against the DV it cached at the start
of the op, but the DV might've been updated in the meantime by a locally
generated modification op.
Fix this by the following means:
(1) Keep track of when we're performing a modification operation on a
vnode. This is done by marking vnode parameters with a 'modification'
note that causes the AFS_VNODE_MODIFYING flag to be set on the vnode
for the duration.
(2) Alter the speculation race detection to ignore speculative status
fetches if either the vnode is marked as being modified or the data
version number is not what we expected.
Note that whilst the "vnode modified" warning does get recovered from as it
causes the client to refetch the status at the next opportunity, it will
also invalidate the pagecache, so changes might get lost.
Fixes:
|
||
|
Linus Torvalds
|
fafe1e39ed |
AFS: Use the new netfs lib
-----BEGIN PGP SIGNATURE-----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=fSr0
-----END PGP SIGNATURE-----
Merge tag 'afs-netfs-lib-20210426' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull AFS updates from David Howells:
"Use the new netfs lib.
Begin the process of overhauling the use of the fscache API by AFS and
the introduction of support for features such as Transparent Huge
Pages (THPs).
- Add some support for THPs, including using core VM helper functions
to find details of pages.
- Use the ITER_XARRAY I/O iterator to mediate access to the pagecache
as this handles THPs and doesn't require allocation of large bvec
arrays.
- Delegate address_space read/pre-write I/O methods for AFS to the
netfs helper library. A method is provided to the library that
allows it to issue a read against the server.
This includes a change in use for PG_fscache (it now indicates a
DIO write in progress from the marked page), so a number of waits
need to be deployed for it.
- Split the core AFS writeback function to make it easier to modify
in future patches to handle writing to the cache. [This might
feasibly make more sense moved out into my fscache-iter branch].
I've tested these with "xfstests -g quick" against an AFS volume
(xfstests needs patching to make it work). With this, AFS without a
cache passes all expected xfstests; with a cache, there's an extra
failure, but that's also there before these patches. Fixing that
probably requires a greater overhaul (as can be found on my
fscache-iter branch, but that's for a later time).
Thanks should go to Marc Dionne and Jeff Altman of AuriStor for
exercising the patches in their test farm also"
Link: https://lore.kernel.org/lkml/3785063.1619482429@warthog.procyon.org.uk/
* tag 'afs-netfs-lib-20210426' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Use the netfs_write_begin() helper
afs: Use new netfs lib read helper API
afs: Use the fs operation ops to handle FetchData completion
afs: Prepare for use of THPs
afs: Extract writeback extension into its own function
afs: Wait on PG_fscache before modifying/releasing a page
afs: Use ITER_XARRAY for writing
afs: Set up the iov_iter before calling afs_extract_data()
afs: Log remote unmarshalling errors
afs: Don't truncate iter during data fetch
afs: Move key to afs_read struct
afs: Print the operation debug_id when logging an unexpected data version
afs: Pass page into dirty region helpers to provide THP size
afs: Disable use of the fscache I/O routines
|
||
|
Linus Torvalds
|
d1466bc583 |
Merge branch 'work.inode-type-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs inode type handling updates from Al Viro: "We should never change the type bits of ->i_mode or the method tables (->i_op and ->i_fop) of a live inode. Unfortunately, not all filesystems took care to prevent that" * 'work.inode-type-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: spufs: fix bogosity in S_ISGID handling 9p: missing chunk of "fs/9p: Don't update file type when updating file attributes" openpromfs: don't do unlock_new_inode() until the new inode is set up hostfs_mknod(): don't bother with init_special_inode() cifs: have cifs_fattr_to_inode() refuse to change type on live inode cifs: have ->mkdir() handle race with another client sanely do_cifs_create(): don't set ->i_mode of something we had not created gfs2: be careful with inode refresh ocfs2_inode_lock_update(): make sure we don't change the type bits of i_mode orangefs_inode_is_stale(): i_mode type bits do *not* form a bitmap... vboxsf: don't allow to change the inode type afs: Fix updating of i_mode due to 3rd party change ceph: don't allow type or device number to change on non-I_NEW inodes ceph: fix up error handling with snapdirs new helper: inode_wrong_type() |
||
|
David Howells
|
3003bbd069 |
afs: Use the netfs_write_begin() helper
Make AFS use the new netfs_write_begin() helper to do the pre-reading required before the write. If successful, the helper returns with the required page filled in and locked. It may read more than just one page, expanding the read to meet cache granularity requirements as necessary. Note: A more advanced version of this could be made that does generic_perform_write() for a whole cache granule. This would make it easier to avoid doing the download/read for the data to be overwritten. Signed-off-by: David Howells <dhowells@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-cachefs@redhat.com cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/160588546422.3465195.1546354372589291098.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161539563244.286939.16537296241609909980.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/161653819291.2770958.406013201547420544.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789102743.6155.17396591236631761195.stgit@warthog.procyon.org.uk/ # v6 |
||
|
David Howells
|
5cbf03985c |
afs: Use new netfs lib read helper API
Make AFS use the new netfs read helpers to implement the VM read operations: - afs_readpage() now hands off responsibility to netfs_readpage(). - afs_readpages() is gone and replaced with afs_readahead(). - afs_readahead() just hands off responsibility to netfs_readahead(). These make use of the cache if a cookie is supplied, otherwise just call the ->issue_op() method a sufficient number of times to complete the entire request. Changes: v5: - Use proper wait function for PG_fscache in afs_page_mkwrite()[1]. - Use killable wait for PG_writeback in afs_page_mkwrite()[1]. v4: - Folded in error handling fixes to afs_req_issue_op(). - Added flag to netfs_subreq_terminated() to indicate that the caller may have been running async and stuff that might sleep needs punting to a workqueue. Signed-off-by: David Howells <dhowells@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-cachefs@redhat.com cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk [1] Link: https://lore.kernel.org/r/160588542733.3465195.7526541422073350302.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161118158436.1232039.3884845981224091996.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161161053540.2537118.14904446369309535330.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161340418739.1303470.5908092911600241280.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539561926.286939.5729036262354802339.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/161653817977.2770958.17696456811587237197.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789101258.6155.3879271028895121537.stgit@warthog.procyon.org.uk/ # v6 |
||
|
David Howells
|
dc4191841d |
afs: Use the fs operation ops to handle FetchData completion
Use the 'success' and 'aborted' afs_operations_ops methods and add a 'failed' method to handle the completion of an AFS.FetchData, AFS.FetchData64 or YFS.FetchData64 RPC operation rather than directly calling the done func pointed to by the afs_read struct from the call delivery handler. This means the done function will be called back on error also, not just on successful completion. This allows motion towards asynchronous data reception on data fetch calls and allows any error to be handed off to the fscache read helper in the same place as a successful completion. Signed-off-by: David Howells <dhowells@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-cachefs@redhat.com cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/160588541471.3465195.8807019223378490810.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161118157260.1232039.6549085372718234792.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161161052647.2537118.12922380836599003659.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161340417106.1303470.3502017303898569631.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539560673.286939.391310781674212229.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/161653816367.2770958.5856904574822446404.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789099994.6155.473719823490561190.stgit@warthog.procyon.org.uk/ # v6 |
||
|
David Howells
|
e87b03f583 |
afs: Prepare for use of THPs
As a prelude to supporting transparent huge pages, use thp_size() and similar rather than PAGE_SIZE/SHIFT. Further, try and frame everything in terms of file positions and lengths rather than page indices and numbers of pages. Signed-off-by: David Howells <dhowells@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-cachefs@redhat.com cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/160588540227.3465195.4752143929716269062.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161118155821.1232039.540445038028845740.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161161051439.2537118.15577827510426326534.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161340415869.1303470.6040191748634322355.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539559365.286939.18344613540296085269.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/161653815142.2770958.454490670311230206.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789098713.6155.16394227991842480300.stgit@warthog.procyon.org.uk/ # v6 |
||
|
David Howells
|
810caa3e67 |
afs: Extract writeback extension into its own function
Extract writeback extension into its own function to break up the writeback function a bit. Signed-off-by: David Howells <dhowells@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-cachefs@redhat.com cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/160588538471.3465195.782513375683399583.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161118154610.1232039.1765365632920504822.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161161050546.2537118.2202554806419189453.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161340414102.1303470.9078891484034668985.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539558417.286939.2879469588895925399.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/161653813972.2770958.12671731209438112378.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789097132.6155.4916609419912731964.stgit@warthog.procyon.org.uk/ # v6 |
||
|
David Howells
|
630f5dda84 |
afs: Wait on PG_fscache before modifying/releasing a page
PG_fscache is going to be used to indicate that a page is being written to the cache, and that the page should not be modified or released until it's finished. Make afs_invalidatepage() and afs_releasepage() wait for it. Signed-off-by: David Howells <dhowells@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-cachefs@redhat.com cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/158861253957.340223.7465334678444521655.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/159465832417.1377938.3571599385208729791.stgit@warthog.procyon.org.uk/ Link: https://lore.kernel.org/r/160588536286.3465195.13231895135369807920.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161118153708.1232039.3535103645871176749.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161161049369.2537118.11591934943429117060.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161340412903.1303470.6424701655031380012.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539556890.286939.5873470593519458598.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/161653812726.2770958.18167145829938766503.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789096241.6155.5907241930823579235.stgit@warthog.procyon.org.uk/ # v6 |
||
|
David Howells
|
bd80d8a80e |
afs: Use ITER_XARRAY for writing
Use a single ITER_XARRAY iterator to describe the portion of a file to be transmitted to the server rather than generating a series of small ITER_BVEC iterators on the fly. This will make it easier to implement AIO in afs. In theory we could maybe use one giant ITER_BVEC, but that means potentially allocating a huge array of bio_vec structs (max 256 per page) when in fact the pagecache already has a structure listing all the relevant pages (radix_tree/xarray) that can be walked over. Signed-off-by: David Howells <dhowells@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-cachefs@redhat.com cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/153685395197.14766.16289516750731233933.stgit@warthog.procyon.org.uk/ Link: https://lore.kernel.org/r/158861251312.340223.17924900795425422532.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/159465828607.1377938.6903132788463419368.stgit@warthog.procyon.org.uk/ Link: https://lore.kernel.org/r/160588535018.3465195.14509994354240338307.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161118152415.1232039.6452879415814850025.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161161048194.2537118.13763612220937637316.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161340411602.1303470.4661108879482218408.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539555629.286939.5241869986617154517.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/161653811456.2770958.7017388543246759245.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789095005.6155.6789055030327407928.stgit@warthog.procyon.org.uk/ # v6 |
||
|
David Howells
|
c450846461 |
afs: Set up the iov_iter before calling afs_extract_data()
afs_extract_data() sets up a temporary iov_iter and passes it to AF_RXRPC
each time it is called to describe the remaining buffer to be filled.
Instead:
(1) Put an iterator in the afs_call struct.
(2) Set the iterator for each marshalling stage to load data into the
appropriate places. A number of convenience functions are provided to
this end (eg. afs_extract_to_buf()).
This iterator is then passed to afs_extract_data().
(3) Use the new ITER_XARRAY iterator when reading data to load directly
into the inode's pages without needing to create a list of them.
This will allow O_DIRECT calls to be supported in future patches.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-By: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/152898380012.11616.12094591785228251717.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/153685394431.14766.3178466345696987059.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/153999787395.866.11218209749223643998.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/154033911195.12041.3882700371848894587.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/158861250059.340223.1248231474865140653.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/159465827399.1377938.11181327349704960046.stgit@warthog.procyon.org.uk/
Link: https://lore.kernel.org/r/160588533776.3465195.3612752083351956948.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161118151238.1232039.17015723405750601161.stgit@warthog.procyon.org.uk/ # rfc
Link: https://lore.kernel.org/r/161161047240.2537118.14721975104810564022.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/161340410333.1303470.16260122230371140878.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/161539554187.286939.15305559004905459852.stgit@warthog.procyon.org.uk/ # v4
Link: https://lore.kernel.org/r/161653810525.2770958.4630666029125411789.stgit@warthog.procyon.org.uk/ # v5
Link: https://lore.kernel.org/r/161789093719.6155.7877160739235087723.stgit@warthog.procyon.org.uk/ # v6
|
||
|
David Howells
|
05092755aa |
afs: Log remote unmarshalling errors
Log unmarshalling errors reported by the peer (ie. it can't parse what we sent it). Limit the maximum number of messages to 3. Signed-off-by: David Howells <dhowells@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-cachefs@redhat.com cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/159465826250.1377938.16372395422217583913.stgit@warthog.procyon.org.uk/ Link: https://lore.kernel.org/r/160588532584.3465195.15618385466614028590.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161118149739.1232039.208060911149801695.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161161046033.2537118.7779717661044373273.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161340409118.1303470.17812607349396199116.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539552964.286939.16503232687974398308.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/161653808989.2770958.11530765353025697860.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789092349.6155.8581594259882708631.stgit@warthog.procyon.org.uk/ # v6 |
||
|
David Howells
|
f105da1a79 |
afs: Don't truncate iter during data fetch
Don't truncate the iterator to correspond to the actual data size when fetching the data from the server - rather, pass the length we want to read to rxrpc. This will allow the clear-after-read code in future to simply clear the remaining iterator capacity rather than having to reinitialise the iterator. Signed-off-by: David Howells <dhowells@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-cachefs@redhat.com cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/158861249201.340223.13035445866976590375.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/159465825061.1377938.14403904452300909320.stgit@warthog.procyon.org.uk/ Link: https://lore.kernel.org/r/160588531418.3465195.10712005940763063144.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161118148567.1232039.13380313332292947956.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161161044610.2537118.17908520793806837792.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161340407907.1303470.6501394859511712746.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539551721.286939.14655713136572200716.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/161653807790.2770958.14034599989374173734.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789090823.6155.15673999934535049102.stgit@warthog.procyon.org.uk/ # v6 |
||
|
David Howells
|
c69bf479ba |
afs: Move key to afs_read struct
Stash the key used to authenticate read operations in the afs_read struct. This will be necessary to reissue the operation against the server if a read from the cache fails in upcoming cache changes. Signed-off-by: David Howells <dhowells@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-cachefs@redhat.com cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/158861248336.340223.1851189950710196001.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/159465823899.1377938.11925978022348532049.stgit@warthog.procyon.org.uk/ Link: https://lore.kernel.org/r/160588529557.3465195.7303323479305254243.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161118147693.1232039.13780672951838643842.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161161043340.2537118.511899217704140722.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161340406678.1303470.12676824086429446370.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539550819.286939.1268332875889175195.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/161653806683.2770958.11300984379283401542.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789089556.6155.14603302893431820997.stgit@warthog.procyon.org.uk/ # v6 |
||
|
David Howells
|
f015cf1d6b |
afs: Print the operation debug_id when logging an unexpected data version
Print the afs_operation debug_id when logging an unexpected change in the data version. This allows the logged message to be matched against tracelines. Signed-off-by: David Howells <dhowells@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-cachefs@redhat.com cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/160588528377.3465195.2206051235095182302.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161118146111.1232039.11398082422487058312.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161161042180.2537118.2471333561661033316.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161340405772.1303470.3877167548944248214.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539549628.286939.15234870409714613954.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/161653805530.2770958.15120507632529970934.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789088290.6155.3494369629853673866.stgit@warthog.procyon.org.uk/ # v6 |
||
|
David Howells
|
67d78a6f6e |
afs: Pass page into dirty region helpers to provide THP size
Pass a pointer to the page being accessed into the dirty region helpers so that the size of the page can be determined in case it's a transparent huge page. This also required the page to be passed into the afs_page_dirty trace point - so there's no need to specifically pass in the index or private data as these can be retrieved directly from the page struct. Signed-off-by: David Howells <dhowells@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-cachefs@redhat.com cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/160588527183.3465195.16107942526481976308.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161118144921.1232039.11377711180492625929.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161161040747.2537118.11435394902674511430.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161340404553.1303470.11414163641767769882.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539548385.286939.8864598314493255313.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/161653804285.2770958.3497360004849598038.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789087043.6155.16922142208140170528.stgit@warthog.procyon.org.uk/ # v6 |
||
|
David Howells
|
03ffae9092 |
afs: Disable use of the fscache I/O routines
Disable use of the fscache I/O routined by the AFS filesystem. It's about to transition to passing iov_iters down and fscache is about to have its I/O path to use iov_iter, so all that needs to change. Signed-off-by: David Howells <dhowells@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org cc: linux-cachefs@redhat.com cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/158861209824.340223.1864211542341758994.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/159465768717.1376105.2229314852486665807.stgit@warthog.procyon.org.uk/ Link: https://lore.kernel.org/r/160588457929.3465195.1730097418904945578.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161118143744.1232039.2727898205333669064.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161161039077.2537118.7986870854927176905.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161340403323.1303470.8159439948319423431.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539547167.286939.3536238932531122332.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/161653802797.2770958.547311814861545911.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789085806.6155.2596146255056027428.stgit@warthog.procyon.org.uk/ # v6 |
||
|
Matthew Wilcox (Oracle)
|
75b6979961 |
afs: Use wait_on_page_writeback_killable
Open-coding this function meant it missed out on the recent bugfix
for waiters being woken by a delayed wake event from a previous
instantiation of the page[1].
[DH: Changed the patch to use vmf->page rather than variable page which
doesn't exist yet upstream]
Fixes:
|
||
|
David Howells
|
a7889c6320 |
afs: Stop listxattr() from listing "afs.*" attributes
afs_listxattr() lists all the available special afs xattrs (i.e. those in
the "afs.*" space), no matter what type of server we're dealing with. But
OpenAFS servers, for example, cannot deal with some of the extra-capable
attributes that AuriStor (YFS) servers provide. Unfortunately, the
presence of the afs.yfs.* attributes causes errors[1] for anything that
tries to read them if the server is of the wrong type.
Fix the problem by removing afs_listxattr() so that none of the special
xattrs are listed (AFS doesn't support xattrs). It does mean, however,
that getfattr won't list them, though they can still be accessed with
getxattr() and setxattr().
This can be tested with something like:
getfattr -d -m ".*" /afs/example.com/path/to/file
With this change, none of the afs.* attributes should be visible.
Changes:
ver #2:
- Hide all of the afs.* xattrs, not just the ACL ones.
Fixes:
|
||
|
David Howells
|
64fcbb6158 |
afs: Fix accessing YFS xattrs on a non-YFS server
If someone attempts to access YFS-related xattrs (e.g. afs.yfs.acl) on a
file on a non-YFS AFS server (such as OpenAFS), then the kernel will jump
to a NULL function pointer because the afs_fetch_acl_operation descriptor
doesn't point to a function for issuing an operation on a non-YFS
server[1].
Fix this by making afs_wait_for_operation() check that the issue_afs_rpc
method is set before jumping to it and setting -ENOTSUPP if not. This fix
also covers other potential operations that also only exist on YFS servers.
afs_xattr_get/set_yfs() then need to translate -ENOTSUPP to -ENODATA as the
former error is internal to the kernel.
The bug shows up as an oops like the following:
BUG: kernel NULL pointer dereference, address: 0000000000000000
[...]
Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
[...]
Call Trace:
afs_wait_for_operation+0x83/0x1b0 [kafs]
afs_xattr_get_yfs+0xe6/0x270 [kafs]
__vfs_getxattr+0x59/0x80
vfs_getxattr+0x11c/0x140
getxattr+0x181/0x250
? __check_object_size+0x13f/0x150
? __fput+0x16d/0x250
__x64_sys_fgetxattr+0x64/0xb0
do_syscall_64+0x49/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fb120a9defe
This was triggered with "cp -a" which attempts to copy xattrs, including
afs ones, but is easier to reproduce with getfattr, e.g.:
getfattr -d -m ".*" /afs/openafs.org/
Fixes:
|
||
|
David Howells
|
6e1eb04a87 |
afs: Fix updating of i_mode due to 3rd party change
Fix afs_apply_status() to mask off the irrelevant bits from status->mode
when OR'ing them into i_mode. This can happen when a 3rd party chmod
occurs.
Also fix afs_inode_init_from_status() to mask off the mode bits when
initialising i_mode.
Fixes:
|
||
|
Linus Torvalds
|
7d6beb71da |
idmapped-mounts-v5.12
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYCegywAKCRCRxhvAZXjc
ouJ6AQDlf+7jCQlQdeKKoN9QDFfMzG1ooemat36EpRRTONaGuAD8D9A4sUsG4+5f
4IU5Lj9oY4DEmF8HenbWK2ZHsesL2Qg=
=yPaw
-----END PGP SIGNATURE-----
Merge tag 'idmapped-mounts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull idmapped mounts from Christian Brauner:
"This introduces idmapped mounts which has been in the making for some
time. Simply put, different mounts can expose the same file or
directory with different ownership. This initial implementation comes
with ports for fat, ext4 and with Christoph's port for xfs with more
filesystems being actively worked on by independent people and
maintainers.
Idmapping mounts handle a wide range of long standing use-cases. Here
are just a few:
- Idmapped mounts make it possible to easily share files between
multiple users or multiple machines especially in complex
scenarios. For example, idmapped mounts will be used in the
implementation of portable home directories in
systemd-homed.service(8) where they allow users to move their home
directory to an external storage device and use it on multiple
computers where they are assigned different uids and gids. This
effectively makes it possible to assign random uids and gids at
login time.
- It is possible to share files from the host with unprivileged
containers without having to change ownership permanently through
chown(2).
- It is possible to idmap a container's rootfs and without having to
mangle every file. For example, Chromebooks use it to share the
user's Download folder with their unprivileged containers in their
Linux subsystem.
- It is possible to share files between containers with
non-overlapping idmappings.
- Filesystem that lack a proper concept of ownership such as fat can
use idmapped mounts to implement discretionary access (DAC)
permission checking.
- They allow users to efficiently changing ownership on a per-mount
basis without having to (recursively) chown(2) all files. In
contrast to chown (2) changing ownership of large sets of files is
instantenous with idmapped mounts. This is especially useful when
ownership of a whole root filesystem of a virtual machine or
container is changed. With idmapped mounts a single syscall
mount_setattr syscall will be sufficient to change the ownership of
all files.
- Idmapped mounts always take the current ownership into account as
idmappings specify what a given uid or gid is supposed to be mapped
to. This contrasts with the chown(2) syscall which cannot by itself
take the current ownership of the files it changes into account. It
simply changes the ownership to the specified uid and gid. This is
especially problematic when recursively chown(2)ing a large set of
files which is commong with the aforementioned portable home
directory and container and vm scenario.
- Idmapped mounts allow to change ownership locally, restricting it
to specific mounts, and temporarily as the ownership changes only
apply as long as the mount exists.
Several userspace projects have either already put up patches and
pull-requests for this feature or will do so should you decide to pull
this:
- systemd: In a wide variety of scenarios but especially right away
in their implementation of portable home directories.
https://systemd.io/HOME_DIRECTORY/
- container runtimes: containerd, runC, LXD:To share data between
host and unprivileged containers, unprivileged and privileged
containers, etc. The pull request for idmapped mounts support in
containerd, the default Kubernetes runtime is already up for quite
a while now: https://github.com/containerd/containerd/pull/4734
- The virtio-fs developers and several users have expressed interest
in using this feature with virtual machines once virtio-fs is
ported.
- ChromeOS: Sharing host-directories with unprivileged containers.
I've tightly synced with all those projects and all of those listed
here have also expressed their need/desire for this feature on the
mailing list. For more info on how people use this there's a bunch of
talks about this too. Here's just two recent ones:
https://www.cncf.io/wp-content/uploads/2020/12/Rootless-Containers-in-Gitpod.pdf
https://fosdem.org/2021/schedule/event/containers_idmap/
This comes with an extensive xfstests suite covering both ext4 and
xfs:
https://git.kernel.org/brauner/xfstests-dev/h/idmapped_mounts
It covers truncation, creation, opening, xattrs, vfscaps, setid
execution, setgid inheritance and more both with idmapped and
non-idmapped mounts. It already helped to discover an unrelated xfs
setgid inheritance bug which has since been fixed in mainline. It will
be sent for inclusion with the xfstests project should you decide to
merge this.
In order to support per-mount idmappings vfsmounts are marked with
user namespaces. The idmapping of the user namespace will be used to
map the ids of vfs objects when they are accessed through that mount.
By default all vfsmounts are marked with the initial user namespace.
The initial user namespace is used to indicate that a mount is not
idmapped. All operations behave as before and this is verified in the
testsuite.
Based on prior discussions we want to attach the whole user namespace
and not just a dedicated idmapping struct. This allows us to reuse all
the helpers that already exist for dealing with idmappings instead of
introducing a whole new range of helpers. In addition, if we decide in
the future that we are confident enough to enable unprivileged users
to setup idmapped mounts the permission checking can take into account
whether the caller is privileged in the user namespace the mount is
currently marked with.
The user namespace the mount will be marked with can be specified by
passing a file descriptor refering to the user namespace as an
argument to the new mount_setattr() syscall together with the new
MOUNT_ATTR_IDMAP flag. The system call follows the openat2() pattern
of extensibility.
The following conditions must be met in order to create an idmapped
mount:
- The caller must currently have the CAP_SYS_ADMIN capability in the
user namespace the underlying filesystem has been mounted in.
- The underlying filesystem must support idmapped mounts.
- The mount must not already be idmapped. This also implies that the
idmapping of a mount cannot be altered once it has been idmapped.
- The mount must be a detached/anonymous mount, i.e. it must have
been created by calling open_tree() with the OPEN_TREE_CLONE flag
and it must not already have been visible in the filesystem.
The last two points guarantee easier semantics for userspace and the
kernel and make the implementation significantly simpler.
By default vfsmounts are marked with the initial user namespace and no
behavioral or performance changes are observed.
The manpage with a detailed description can be found here:
|
||
|
David Howells
|
5399d52233 |
rxrpc: Fix deadlock around release of dst cached on udp tunnel
AF_RXRPC sockets use UDP ports in encap mode. This causes socket and dst
from an incoming packet to get stolen and attached to the UDP socket from
whence it is leaked when that socket is closed.
When a network namespace is removed, the wait for dst records to be cleaned
up happens before the cleanup of the rxrpc and UDP socket, meaning that the
wait never finishes.
Fix this by moving the rxrpc (and, by dependence, the afs) private
per-network namespace registrations to the device group rather than subsys
group. This allows cached rxrpc local endpoints to be cleared and their
UDP sockets closed before we try waiting for the dst records.
The symptom is that lines looking like the following:
unregister_netdevice: waiting for lo to become free
get emitted at regular intervals after running something like the
referenced syzbot test.
Thanks to Vadim for tracking this down and work out the fix.
Reported-by: syzbot+df400f2f24a1677cd7e0@syzkaller.appspotmail.com
Reported-by: Vadim Fedorenko <vfedorenko@novek.ru>
Fixes:
|
||
Christian Brauner
|
549c729771
|
fs: make helpers idmap mount aware
Extend some inode methods with an additional user namespace argument. A filesystem that is aware of idmapped mounts will receive the user namespace the mount has been marked with. This can be used for additional permission checking and also to enable filesystems to translate between uids and gids if they need to. We have implemented all relevant helpers in earlier patches. As requested we simply extend the exisiting inode method instead of introducing new ones. This is a little more code churn but it's mostly mechanical and doesnt't leave us with additional inode methods. Link: https://lore.kernel.org/r/20210121131959.646623-25-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> |
||
|
Christian Brauner
|
0d56a4518d
|
stat: handle idmapped mounts
The generic_fillattr() helper fills in the basic attributes associated with an inode. Enable it to handle idmapped mounts. If the inode is accessed through an idmapped mount map it into the mount's user namespace before we store the uid and gid. If the initial user namespace is passed nothing changes so non-idmapped mounts will see identical behavior as before. Link: https://lore.kernel.org/r/20210121131959.646623-12-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: James Morris <jamorris@linux.microsoft.com> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> |
||
|
Christian Brauner
|
e65ce2a50c
|
acl: handle idmapped mounts
The posix acl permission checking helpers determine whether a caller is privileged over an inode according to the acls associated with the inode. Add helpers that make it possible to handle acls on idmapped mounts. The vfs and the filesystems targeted by this first iteration make use of posix_acl_fix_xattr_from_user() and posix_acl_fix_xattr_to_user() to translate basic posix access and default permissions such as the ACL_USER and ACL_GROUP type according to the initial user namespace (or the superblock's user namespace) to and from the caller's current user namespace. Adapt these two helpers to handle idmapped mounts whereby we either map from or into the mount's user namespace depending on in which direction we're translating. Similarly, cap_convert_nscap() is used by the vfs to translate user namespace and non-user namespace aware filesystem capabilities from the superblock's user namespace to the caller's user namespace. Enable it to handle idmapped mounts by accounting for the mount's user namespace. In addition the fileystems targeted in the first iteration of this patch series make use of the posix_acl_chmod() and, posix_acl_update_mode() helpers. Both helpers perform permission checks on the target inode. Let them handle idmapped mounts. These two helpers are called when posix acls are set by the respective filesystems to handle this case we extend the ->set() method to take an additional user namespace argument to pass the mount's user namespace down. Link: https://lore.kernel.org/r/20210121131959.646623-9-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> |
||
|
David Howells
|
366911cd76 |
afs: Fix directory entry size calculation
The number of dirent records used by an AFS directory entry should be
calculated using the assumption that there is a 16-byte name field in the
first block, rather than a 20-byte name field (which is actually the case).
This miscalculation is historic and effectively standard, so we have to use
it.
The calculation we need to use is:
1 + (((strlen(name) + 1) + 15) >> 5)
where we are adding one to the strlen() result to account for the NUL
termination.
Fix this by the following means:
(1) Create an inline function to do the calculation for a given name
length.
(2) Use the function to calculate the number of records used for a dirent
in afs_dir_iterate_block().
Use this to move the over-end check out of the loop since it only
needs to be done once.
Further use this to only go through the loop for the 2nd+ records
composing an entry. The only test there now is for if the record is
allocated - and we already checked the first block at the top of the
outer loop.
(3) Add a max name length check in afs_dir_iterate_block().
(4) Make afs_edit_dir_add() and afs_edit_dir_remove() use the function
from (1) to calculate the number of blocks rather than doing it
incorrectly themselves.
Fixes:
|
||
|
David Howells
|
26982a89ca |
afs: Work around strnlen() oops with CONFIG_FORTIFIED_SOURCE=y
AFS has a structured layout in its directory contents (AFS dirs are downloaded as files and parsed locally by the client for lookup/readdir). The slots in the directory are defined by union afs_xdr_dirent. This, however, only directly allows a name of a length that will fit into that union. To support a longer name, the next 1-8 contiguous entries are annexed to the first one and the name flows across these. afs_dir_iterate_block() uses strnlen(), limited to the space to the end of the page, to find out how long the name is. This worked fine until |
||
|
David Howells
|
4cb6829647 |
afs: Fix memory leak when mounting with multiple source parameters
There's a memory leak in afs_parse_source() whereby multiple source=
parameters overwrite fc->source in the fs_context struct without freeing
the previously recorded source.
Fix this by only permitting a single source parameter and rejecting with
an error all subsequent ones.
This was caught by syzbot with the kernel memory leak detector, showing
something like the following trace:
unreferenced object 0xffff888114375440 (size 32):
comm "repro", pid 5168, jiffies 4294923723 (age 569.948s)
backtrace:
slab_post_alloc_hook+0x42/0x79
__kmalloc_track_caller+0x125/0x16a
kmemdup_nul+0x24/0x3c
vfs_parse_fs_string+0x5a/0xa1
generic_parse_monolithic+0x9d/0xc5
do_new_mount+0x10d/0x15a
do_mount+0x5f/0x8e
__do_sys_mount+0xff/0x127
do_syscall_64+0x2d/0x3a
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes:
|
||
|
David Howells
|
a9e5c87ca7 |
afs: Fix speculative status fetch going out of order wrt to modifications
When doing a lookup in a directory, the afs filesystem uses a bulk
status fetch to speculatively retrieve the statuses of up to 48 other
vnodes found in the same directory and it will then either update extant
inodes or create new ones - effectively doing 'lookup ahead'.
To avoid the possibility of deadlocking itself, however, the filesystem
doesn't lock all of those inodes; rather just the directory inode is
locked (by the VFS).
When the operation completes, afs_inode_init_from_status() or
afs_apply_status() is called, depending on whether the inode already
exists, to commit the new status.
A case exists, however, where the speculative status fetch operation may
straddle a modification operation on one of those vnodes. What can then
happen is that the speculative bulk status RPC retrieves the old status,
and whilst that is happening, the modification happens - which returns
an updated status, then the modification status is committed, then we
attempt to commit the speculative status.
This results in something like the following being seen in dmesg:
kAFS: vnode modified {100058:861} 8->9 YFS.InlineBulkStatus
showing that for vnode 861 on volume 100058, we saw YFS.InlineBulkStatus
say that the vnode had data version 8 when we'd already recorded version
9 due to a local modification. This was causing the cache to be
invalidated for that vnode when it shouldn't have been. If it happens
on a data file, this might lead to local changes being lost.
Fix this by ignoring speculative status updates if the data version
doesn't match the expected value.
Note that it is possible to get a DV regression if a volume gets
restored from a backup - but we should get a callback break in such a
case that should trigger a recheck anyway. It might be worth checking
the volume creation time in the volsync info and, if a change is
observed in that (as would happen on a restore), invalidate all caches
associated with the volume.
Fixes:
|