Now that we can destroy the hierarchy, the code must remove what it
had put in place at the creation. In our case, the cpu hotplug
callbacks.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20220130210210.549877-6-daniel.lezcano@linaro.org
The 'root' node is checked everytime a dtpm node is destroyed.
When we reach the end of the hierarchy destruction function, we can
unconditionnaly set the 'root' node to NULL again.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20220130210210.549877-5-daniel.lezcano@linaro.org
The hierarchy creation function exits but without a destroy hierarchy
function. Due to that, the modules creating the hierarchy can not be
unloaded properly because they don't have an exit callback.
Provide the dtpm_destroy_hierarchy() function to remove the previously
created hierarchy.
The function relies on all the release mechanisms implemented by the
underlying powercap framework.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20220130210210.549877-4-daniel.lezcano@linaro.org
The release function does not reset the per cpu variable when it is
called. That will prevent creation again as the variable will be
already from the previous creation.
Fix it by resetting them.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20220130210210.549877-2-daniel.lezcano@linaro.org
The different functions are all called through the
dtpm_create_hierarchy() which handle the mutex. The different
functions are used in this context, consequently with the lock always
held.
Remove all locks taken in the function and add the lock in the
hierarchy creation function.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20220130210210.549877-1-daniel.lezcano@linaro.org
Currently the dtpm supports the CPUs via cpufreq and the energy
model. This change provides the same for the device which supports
devfreq.
Each device supporting devfreq and having an energy model can be added
to the hierarchy.
The concept is the same as the cpufreq DTPM support: the QoS is used
to aggregate the requests and the energy model gives the value of the
instantaneous power consumption ponderated by the load of the device.
Cc: Chanwoo Choi <cwchoi00@gmail.com>
Cc: Lukasz Luba <lukasz.luba@arm.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20220128163537.212248-5-daniel.lezcano@linaro.org
Based on the previous DT changes in the core code, use the 'setup'
callback to initialize the CPU DTPM backend.
Code is reorganized to stick to the DTPM table description. No
functional changes.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20220128163537.212248-4-daniel.lezcano@linaro.org
The DTPM framework is available but without a way to configure it.
This change provides a way to create a hierarchy of DTPM node where
the power consumption reflects the sum of the children's power
consumption.
It is up to the platform to specify an array of dtpm nodes where each
element has a pointer to its parent, except the top most one. The type
of the node gives the indication of which initialization callback to
call. At this time, we can create a virtual node, where its purpose is
to be a parent in the hierarchy, and a DT node where the name
describes its path.
In order to ensure a nice self-encapsulation, the DTPM subsys array
contains a couple of initialization functions, one to setup the DTPM
backend and one to initialize it up. With this approach, the DTPM
framework has a very few material to export.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20220128163537.212248-3-daniel.lezcano@linaro.org
The init table section is freed after the system booted. However the
next changes will make per module the DTPM description, so the table
won't be accessible when the module is loaded.
In order to fix that, we should move the table to the data section
where there are very few entries and that makes strange to add it
there.
The main goal of the table was to keep self-encapsulated code and we
can keep it almost as it by using an array instead.
Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20220128163537.212248-2-daniel.lezcano@linaro.org
Drop superfluous "the" from the comment in line 15.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
[ rjw: Subject edit, new changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On Sapphire Rapids, the layout of the Psys domain Power Limit Register
is different from from what it was before.
Enhance the code to support the new Psys PL register layout.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reported-and-tested-by: Alkattan Dana <dana.alkattan@intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The dtpm_descr variable in init_dtpm() is not used after commit
f751db8ada ("powercap/drivers/dtpm: Disable DTPM at boot time"),
so drop it.
Fixes: f751db8ada ("powercap/drivers/dtpm: Disable DTPM at boot time")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The DTPM framework misses a mechanism to set it up. That is currently
under review but will come after the next cycle.
As the distro are enabling all the kernel options, the DTPM framework
is enabled on platforms where the energy model is not implemented,
thus making the framework inconsistent and disrupting the CPU
frequency scaling service.
Remove the initialization at boot time as a hot fix.
Fixes: 7a89d7eacf ("powercap/drivers/dtpm: Simplify the dtpm table")
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reported-By: Doug Smythies <dsmythies@telus.net>
Tested-By: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When the ENERGY_MODEL and DTPM_CPU are enabled but actually without
any energy model, at cpu hotplug time, the dead cpuhp callback fails
leading to the warning.
Actually, the check could be simplified and we only do an action if
the dtpm cpu is enabled, otherwise we bail out without error.
Fixes: 7a89d7eacf ("powercap/drivers/dtpm: Simplify the dtpm table")
Reported-by: Kenneth R. Crudup <kenny@panix.com>
Tested-by: Kenneth R. Crudup <kenny@panix.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Currently the power consumption is based on the current OPP power
assuming the entire performance domain is fully loaded.
That gives very gross power estimation and we can do much better by
using the load to scale the power consumption.
Use the utilization to normalize and scale the power usage over the
max possible power.
Tested on a rock960 with 2 big CPUS, the power consumption estimation
conforms with the expected one.
Before this change:
~$ ~/dhrystone -t 1 -l 10000&
~$ cat /sys/devices/virtual/powercap/dtpm/dtpm:0/dtpm:0:1/constraint_0_max_power_uw
2260000
After this change:
~$ ~/dhrystone -t 1 -l 10000&
~$ cat /sys/devices/virtual/powercap/dtpm/dtpm:0/dtpm:0:1/constraint_0_max_power_uw
1130000
~$ ~/dhrystone -t 2 -l 10000&
~$ cat /sys/devices/virtual/powercap/dtpm/dtpm:0/dtpm:0:1/constraint_0_max_power_uw
2260000
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20210312130411.29833-5-daniel.lezcano@linaro.org
The dtpm framework provides an API to allocate a dtpm node. However
when a backend dtpm driver needs to allocate a dtpm node it must
define its own structure and store the pointer of this structure in
the private field of the dtpm structure.
It is more elegant to use the container_of macro and add the dtpm
structure inside the dtpm backend specific structure. The code will be
able to deal properly with the dtpm structure as a generic entity,
making all this even more self-encapsulated.
The dtpm_alloc() function does no longer make sense as the dtpm
structure will be allocated when allocating the device specific dtpm
structure. The dtpm_init() is provided instead.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20210312130411.29833-4-daniel.lezcano@linaro.org
The dtpm table is an array of pointers, that forces the user of the
table to define initdata along with the declaration of the table
entry. It is more efficient to create an array of dtpm structure, so
the declaration of the table entry can be done by initializing the
different fields.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20210312130411.29833-3-daniel.lezcano@linaro.org
In order to increase the self-encapsulation of the dtpm generic code,
the following changes are adding a power update ops to the dtpm
ops. That allows the generic code to call directly the dtpm backend
function to update the power values.
The power update function does compute the power characteristics when
the function is invoked. In the case of the CPUs, the power
consumption depends on the number of online CPUs. The online CPUs mask
is not up to date at CPUHP_AP_ONLINE_DYN state in the tear down
callback. That is the reason why the online / offline are at separate
state. As there is already an existing state for DTPM, this one is
only moved to the DEAD state, so there is no addition of new state
with these changes. The dtpm node is not removed when the cpu is
unplugged.
That simplifies the code for the next changes and results in a more
self-encapsulated code.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20210312130411.29833-1-daniel.lezcano@linaro.org
Add Power Limit4 support for Alder Lake SoC.
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The functions get_online_cpus() and put_online_cpus() have been
deprecated during the CPU hotplug rework. They map directly to
cpus_read_lock() and cpus_read_unlock().
Replace deprecated CPU-hotplug functions with the official version.
The behavior remains unchanged.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Enable Hygon Fam18h RAPL support for the power capping framework.
Signed-off-by: Pu Wen <puwen@hygon.cn>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The DTPM framework will evolve in the next cycles. Let's add a
temporary EXPERIMENTAL tag to the option so users will be aware
the API may change over time.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The root node is not set to NULL when the dtpm root node is
removed. Consequently, it is not possible to create a new root
as it is already set.
Set the root node to NULL when the last node is removed.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It's not a good idea to access the phys_proc_id of cpuinfo directly.
Use topology_physical_package_id(cpu) instead.
Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It's not a good idea to access phys_proc_id and cpu_die_id directly.
Use topology_physical_package_id(cpu) and topology_die_id(cpu)
instead.
Signed-off-by: Yunfeng Ye <yeyunfeng@huawei.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add intel_rapl support for the AlderLake Mobile platform.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The kzalloc allocation for dtpm_cpu is currently allocating the size
of the pointer and not the size of the structure. Fix this by using
the correct sizeof argument.
Addresses-Coverity: ("Wrong sizeof argument")
Fixes: 0e8f68d7f0 ("powercap/drivers/dtpm: Add CPU energy model based support")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The powercap_register_control_type() function never returns NULL, it
returns error pointers on error so update this check.
Fixes: a20d0ef97a ("powercap/drivers/dtpm: Add API for dynamic thermal power management")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
We need to unlock on these paths before returning.
Fixes: a20d0ef97a ("powercap/drivers/dtpm: Add API for dynamic thermal power management")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The DTPM_POWER_LIMIT_FLAG is used for test_bit() etc which take a bit
number so it should be bit 0. But currently it's set to BIT(0) then
that is double shifted equivalent to BIT(BIT(0)). This doesn't cause a
run time problem because it's done consistently.
Fixes: a20d0ef97a ("powercap/drivers/dtpm: Add API for dynamic thermal power management")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
32-bit architectures do not support u64 divisions, so the macro
DIV_ROUND_CLOSEST is not adequate as the compiler will replace the
call to an unexisting function for the platform, leading to
unresolved references to symbols.
Fix this by using the compatible macros:
DIV64_U64_ROUND_CLOSEST and DIV_ROUND_CLOSEST_ULL.
Fixes: a20d0ef97a ("powercap/drivers/dtpm: Add API for dynamic thermal power management")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
With the powercap dtpm controller, we are able to plug devices with
power limitation features in the tree.
The following patch introduces the CPU power limitation based on the
energy model and the performance states.
The power limitation is done at the performance domain level. If some
CPUs are unplugged, the corresponding power will be subtracted from
the performance domain total power.
It is up to the platform to initialize the dtpm tree and add the CPU.
Here is an example to create a simple tree with one root node called
"pkg" and the CPU's performance domains.
static int dtpm_register_pkg(struct dtpm_descr *descr)
{
struct dtpm *pkg;
int ret;
pkg = dtpm_alloc(NULL);
if (!pkg)
return -ENOMEM;
ret = dtpm_register(descr->name, pkg, descr->parent);
if (ret)
return ret;
return dtpm_register_cpu(pkg);
}
static struct dtpm_descr descr = {
.name = "pkg",
.init = dtpm_register_pkg,
};
DTPM_DECLARE(descr);
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On the embedded world, the complexity of the SoC leads to an
increasing number of hotspots which need to be monitored and mitigated
as a whole in order to prevent the temperature to go above the
normative and legally stated 'skin temperature'.
Another aspect is to sustain the performance for a given power budget,
for example virtual reality where the user can feel dizziness if the
GPU performance is capped while a big CPU is processing something
else. Or reduce the battery charging because the dissipated power is
too high compared with the power consumed by other devices.
The userspace is the most adequate place to dynamically act on the
different devices by limiting their power given an application
profile: it has the knowledge of the platform.
These userspace daemons are in charge of the Dynamic Thermal Power
Management (DTPM).
Nowadays, the dtpm daemons are abusing the thermal framework as they
act on the cooling device state to force a specific and arbitrary
state without taking care of the governor decisions. Given the closed
loop of some governors that can confuse the logic or directly enter in
a decision conflict.
As the number of cooling device support is limited today to the CPU
and the GPU, the dtpm daemons have little control on the power
dissipation of the system. The out of tree solutions are hacking
around here and there in the drivers, in the frameworks to have
control on the devices. The common solution is to declare them as
cooling devices.
There is no unification of the power limitation unit, opaque states
are used.
This patch provides a way to create a hierarchy of constraints using
the powercap framework. The devices which are registered as power
limit-able devices are represented in this hierarchy as a tree. They
are linked together with intermediate nodes which are just there to
propagate the constraint to the children.
The leaves of the tree are the real devices, the intermediate nodes
are virtual, aggregating the children constraints and power
characteristics.
Each node have a weight on a 2^10 basis, in order to reflect the
percentage of power distribution of the children's node. This
percentage is used to dispatch the power limit to the children.
The weight is computed against the max power of the siblings.
This simple approach allows to do a fair distribution of the power
limit.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
* pm-sleep:
PM: sleep: Add dev_wakeup_path() helper
PM / suspend: fix kernel-doc markup
PM: sleep: Print driver flags for all devices during suspend/resume
* pm-acpi:
PM: ACPI: Refresh wakeup device power configuration every time
PM: ACPI: PCI: Drop acpi_pm_set_bridge_wakeup()
PM: ACPI: reboot: Use S5 for reboot
* pm-domains:
PM: domains: create debugfs nodes when adding power domains
PM: domains: replace -ENOTSUPP with -EOPNOTSUPP
* powercap:
powercap: Adjust printing the constraint name with new line
powercap: RAPL: Add AMD Fam19h RAPL support
powercap: Add AMD Fam17h RAPL support
powercap/intel_rapl_msr: Convert rapl_msr_priv into pointer
x86/msr-index: sort AMD RAPL MSRs by address
The constrain name has limit of size 30, which sometimes might be hit.
When this happens the new line might get lost. Prevent this and set the
max limit for name string length equal 29. This would result is proper
string clamping (when needed) and storing '\n' at index 29 and '\0' at 30,
so similarly as desired originally.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
AMD Family 19h's RAPL MSRs are identical to Family 17h's. Extend
Family 17h's support to Family 19h.
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Victor Ding <victording@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Enable AMD Fam17h RAPL support for the power capping framework.
The support is as per AMD Fam17h Model31h (Zen2) and model 00-ffh
(Zen1) PPR.
Tested by comparing the results of following two sysfs entries and the
values directly read from corresponding MSRs via /dev/cpu/[x]/msr:
/sys/class/powercap/intel-rapl/intel-rapl:0/energy_uj
/sys/class/powercap/intel-rapl/intel-rapl:0/intel-rapl:0:0/energy_uj
Signed-off-by: Victor Ding <victording@google.com>
Acked-by: Kim Phillips <kim.phillips@amd.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Changes the static struct rapl_msr_priv to a pointer to allow using
a different RAPL MSR interface, preparing for supporting AMD's RAPL
MSR interface.
No functional changes.
Signed-off-by: Victor Ding <victording@google.com>
Acked-by: Kim Phillips <kim.phillips@amd.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull turbostat updates from Len Brown:
"Update update to version 20.09.30, one kernel side fix"
* 'turbostat' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: update version number
powercap: restrict energy meter to root access
tools/power turbostat: harden against cpu hotplug
tools/power turbostat: adjust for temperature offset
tools/power turbostat: Build with _FILE_OFFSET_BITS=64
tools/power turbostat: Support AMD Family 19h
tools/power turbostat: Remove empty columns for Jacobsville
tools/power turbostat: Add a new GFXAMHz column that exposes gt_act_freq_mhz.
tools/power x86_energy_perf_policy: Input/output error in a VM
tools/power turbostat: Skip pc8, pc9, pc10 columns, if they are disabled
tools/power turbostat: Support additional CPU model numbers
tools/power turbostat: Fix output formatting for ACPI CST enumeration
tools/power turbostat: Replace HTTP links with HTTPS ones: TURBOSTAT UTILITY
tools/power turbostat: Use sched_getcpu() instead of hardcoded cpu 0
tools/power turbostat: Enable accumulate RAPL display
tools/power turbostat: Introduce functions to accumulate RAPL consumption
tools/power turbostat: Make the energy variable to be 64 bit
tools/power turbostat: Always print idle in the system configuration header
tools/power turbostat: Print /dev/cpu_dma_latency
Remove non-privileged user access to power data contained in
/sys/class/powercap/intel-rapl*/*/energy_uj
Non-privileged users currently have read access to power data and can
use this data to form a security attack. Some privileged
drivers/applications need read access to this data, but don't expose it
to non-privileged users.
For example, thermald uses this data to ensure that power management
works correctly. Thus removing non-privileged access is preferred over
completely disabling this power reporting capability with
CONFIG_INTEL_RAPL=n.
Fixes: 95677a9a38 ("PowerCap: Fix mode for energy counter")
Signed-off-by: Len Brown <len.brown@intel.com>
Cc: stable@vger.kernel.org
A semicolon is not needed after a switch statement.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
On multi-package systems, the Psys MSR is only valid for CPUs on
specific package (master package). The current code makes the
assumption that package 0 is the master package, but this is not
true on new platforms like SPR.
Fix the problem by emuerating the Psys RAPL domain for every
package, so CPUs in slave packages will read 0 for the Psys energy
counter and only CPUs in master packages can get a valid reading
and register the Psys RAPL domain.
The sysfs I/F for the Psys RAPL domain is not changed.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
As only the low 32 bits of the RAPL_DOMAIN_REG_STATUS register
represents the energy counter, and the high 32 bits are reserved,
detect the existence of a RAPL domain by checking the low 32 bits only.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Include the linux/idle_inject.h header to fix W=1 build warning:
drivers/powercap/idle_inject.c:152:6: warning: no previous prototype for ‘idle_inject_set_duration’ [-Wmissing-prototypes]
drivers/powercap/idle_inject.c:167:6: warning: no previous prototype for ‘idle_inject_get_duration’ [-Wmissing-prototypes]
drivers/powercap/idle_inject.c:179:6: warning: no previous prototype for ‘idle_inject_set_latency’ [-Wmissing-prototypes]
drivers/powercap/idle_inject.c:195:5: warning: no previous prototype for ‘idle_inject_start’ [-Wmissing-prototypes]
drivers/powercap/idle_inject.c:227:6: warning: no previous prototype for ‘idle_inject_stop’ [-Wmissing-prototypes]
drivers/powercap/idle_inject.c:299:28: warning: no previous prototype for ‘idle_inject_register’ [-Wmissing-prototypes]
drivers/powercap/idle_inject.c:345:6: warning: no previous prototype for ‘idle_inject_unregister’ [-Wmissing-prototypes]
Signed-off-by: Pujin Shi <shipj@lemote.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Simply add Lakefield model ID. No additional changes are needed.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
[ rjw: Minor subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
