For TDX guests, the maximum number of vcpus needs to be specified when the
TDX guest VM is initialized (creating the TDX data corresponding to TDX
guest) before creating vcpu. It needs to record the maximum number of
vcpus on VM creation (KVM_CREATE_VM) and return error if the number of
vcpus exceeds it
Because there is already max_vcpu member in arm64 struct kvm_arch, move it
to common struct kvm and initialize it to KVM_MAX_VCPUS before
kvm_arch_init_vm() instead of adding it to x86 struct kvm_arch.
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Isaku Yamahata <isaku.yamahata@intel.com>
Message-Id: <e53234cdee6a92357d06c80c03d77c19cdefb804.1646422845.git.isaku.yamahata@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fixes for (relatively) old bugs, to be merged in both the -rc and next
development trees:
* Fix potential races when walking host page table
* Fix bad user ABI for KVM_EXIT_SYSTEM_EVENT
* Fix shadow page table leak when KVM runs nested
When KVM_EXIT_SYSTEM_EVENT was introduced, it included a flags
member that at the time was unused. Unfortunately this extensibility
mechanism has several issues:
- x86 is not writing the member, so it would not be possible to use it
on x86 except for new events
- the member is not aligned to 64 bits, so the definition of the
uAPI struct is incorrect for 32- on 64-bit userspace. This is a
problem for RISC-V, which supports CONFIG_KVM_COMPAT, but fortunately
usage of flags was only introduced in 5.18.
Since padding has to be introduced, place a new field in there
that tells if the flags field is valid. To allow further extensibility,
in fact, change flags to an array of 16 values, and store how many
of the values are valid. The availability of the new ndata field
is tied to a system capability; all architectures are changed to
fill in the field.
To avoid breaking compilation of userspace that was using the flags
field, provide a userspace-only union to overlap flags with data[0].
The new field is placed at the same offset for both 32- and 64-bit
userspace.
Cc: Will Deacon <will@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Peter Gonda <pgonda@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reported-by: kernel test robot <lkp@intel.com>
Message-Id: <20220422103013.34832-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Flush the CPU caches when memory is reclaimed from an SEV guest (where
reclaim also includes it being unmapped from KVM's memslots). Due to lack
of coherency for SEV encrypted memory, failure to flush results in silent
data corruption if userspace is malicious/broken and doesn't ensure SEV
guest memory is properly pinned and unpinned.
Cache coherency is not enforced across the VM boundary in SEV (AMD APM
vol.2 Section 15.34.7). Confidential cachelines, generated by confidential
VM guests have to be explicitly flushed on the host side. If a memory page
containing dirty confidential cachelines was released by VM and reallocated
to another user, the cachelines may corrupt the new user at a later time.
KVM takes a shortcut by assuming all confidential memory remain pinned
until the end of VM lifetime. Therefore, KVM does not flush cache at
mmu_notifier invalidation events. Because of this incorrect assumption and
the lack of cache flushing, malicous userspace can crash the host kernel:
creating a malicious VM and continuously allocates/releases unpinned
confidential memory pages when the VM is running.
Add cache flush operations to mmu_notifier operations to ensure that any
physical memory leaving the guest VM get flushed. In particular, hook
mmu_notifier_invalidate_range_start and mmu_notifier_release events and
flush cache accordingly. The hook after releasing the mmu lock to avoid
contention with other vCPUs.
Cc: stable@vger.kernel.org
Suggested-by: Sean Christpherson <seanjc@google.com>
Reported-by: Mingwei Zhang <mizhang@google.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Message-Id: <20220421031407.2516575-4-mizhang@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SPDX comments use use /* */ style comments in headers anad
// style comments in .c files. Also fix two spelling mistakes.
Signed-off-by: Tom Rix <trix@redhat.com>
Message-Id: <20220410153840.55506-1-trix@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Initialize debugfs_entry to its semi-magical -ENOENT value when the VM
is created. KVM's teardown when VM creation fails is kludgy and calls
kvm_uevent_notify_change() and kvm_destroy_vm_debugfs() even if KVM never
attempted kvm_create_vm_debugfs(). Because debugfs_entry is zero
initialized, the IS_ERR() checks pass and KVM derefs a NULL pointer.
BUG: kernel NULL pointer dereference, address: 0000000000000018
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 1068b1067 P4D 1068b1067 PUD 1068b0067 PMD 0
Oops: 0000 [#1] SMP
CPU: 0 PID: 871 Comm: repro Not tainted 5.18.0-rc1+ #825
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:__dentry_path+0x7b/0x130
Call Trace:
<TASK>
dentry_path_raw+0x42/0x70
kvm_uevent_notify_change.part.0+0x10c/0x200 [kvm]
kvm_put_kvm+0x63/0x2b0 [kvm]
kvm_dev_ioctl+0x43a/0x920 [kvm]
__x64_sys_ioctl+0x83/0xb0
do_syscall_64+0x31/0x50
entry_SYSCALL_64_after_hwframe+0x44/0xae
</TASK>
Modules linked in: kvm_intel kvm irqbypass
Fixes: a44a4cc1c9 ("KVM: Don't create VM debugfs files outside of the VM directory")
Cc: stable@vger.kernel.org
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oupton@google.com>
Reported-by: syzbot+df6fbbd2ee39f21289ef@syzkaller.appspotmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Oliver Upton <oupton@google.com>
Message-Id: <20220415004622.2207751-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Some PSCI fixes after introducing PSCIv1.1 and SYSTEM_RESET2
- Fix the MMU write-lock not being taken on THP split
- Fix mixed-width VM handling
- Fix potential UAF when debugfs registration fails
- Various selftest updates for all of the above
-----BEGIN PGP SIGNATURE-----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=0xZo
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 5.18, take #1
- Some PSCI fixes after introducing PSCIv1.1 and SYSTEM_RESET2
- Fix the MMU write-lock not being taken on THP split
- Fix mixed-width VM handling
- Fix potential UAF when debugfs registration fails
- Various selftest updates for all of the above
Unfortunately, there is no guarantee that KVM was able to instantiate a
debugfs directory for a particular VM. To that end, KVM shouldn't even
attempt to create new debugfs files in this case. If the specified
parent dentry is NULL, debugfs_create_file() will instantiate files at
the root of debugfs.
For arm64, it is possible to create the vgic-state file outside of a
VM directory, the file is not cleaned up when a VM is destroyed.
Nonetheless, the corresponding struct kvm is freed when the VM is
destroyed.
Nip the problem in the bud for all possible errant debugfs file
creations by initializing kvm->debugfs_dentry to -ENOENT. In so doing,
debugfs_create_file() will fail instead of creating the file in the root
directory.
Cc: stable@kernel.org
Fixes: 929f45e324 ("kvm: no need to check return value of debugfs_create functions")
Signed-off-by: Oliver Upton <oupton@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220406235615.1447180-2-oupton@google.com
kvm_vcpu_release() will call kvm_dirty_ring_free(), freeing
ring->dirty_gfns and setting it to NULL. Afterwards, it calls
kvm_arch_vcpu_destroy().
However, if closing the file descriptor races with KVM_RUN in such away
that vcpu->arch.st.preempted == 0, the following call stack leads to a
NULL pointer dereference in kvm_dirty_run_push():
mark_page_dirty_in_slot+0x192/0x270 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3171
kvm_steal_time_set_preempted arch/x86/kvm/x86.c:4600 [inline]
kvm_arch_vcpu_put+0x34e/0x5b0 arch/x86/kvm/x86.c:4618
vcpu_put+0x1b/0x70 arch/x86/kvm/../../../virt/kvm/kvm_main.c:211
vmx_free_vcpu+0xcb/0x130 arch/x86/kvm/vmx/vmx.c:6985
kvm_arch_vcpu_destroy+0x76/0x290 arch/x86/kvm/x86.c:11219
kvm_vcpu_destroy arch/x86/kvm/../../../virt/kvm/kvm_main.c:441 [inline]
The fix is to release the dirty page ring after kvm_arch_vcpu_destroy
has run.
Reported-by: Qiuhao Li <qiuhao@sysec.org>
Reported-by: Gaoning Pan <pgn@zju.edu.cn>
Reported-by: Yongkang Jia <kangel@zju.edu.cn>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It isn't OK to cache the dirty status of a page in internal structures
for an indefinite period of time.
Any time a vCPU exits the run loop to userspace might be its last; the
VMM might do its final check of the dirty log, flush the last remaining
dirty pages to the destination and complete a live migration. If we
have internal 'dirty' state which doesn't get flushed until the vCPU
is finally destroyed on the source after migration is complete, then
we have lost data because that will escape the final copy.
This problem already exists with the use of kvm_vcpu_unmap() to mark
pages dirty in e.g. VMX nesting.
Note that the actual Linux MM already considers the page to be dirty
since we have a writeable mapping of it. This is just about the KVM
dirty logging.
For the nesting-style use cases (KVM_GUEST_USES_PFN) we will need to
track which gfn_to_pfn_caches have been used and explicitly mark the
corresponding pages dirty before returning to userspace. But we would
have needed external tracking of that anyway, rather than walking the
full list of GPCs to find those belonging to this vCPU which are dirty.
So let's rely *solely* on that external tracking, and keep it simple
rather than laying a tempting trap for callers to fall into.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220303154127.202856-3-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Replace the guest_uses_pa and kernel_map booleans in the PFN cache code
with a unified enum/bitmask. Using explicit names makes it easier to
review and audit call sites.
Opportunistically add a WARN to prevent passing garbage; instantating a
cache without declaring its usage is either buggy or pointless.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20220303154127.202856-2-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Don't actually set a request bit in vcpu->requests when making a request
purely to force a vCPU to exit the guest. Logging a request but not
actually consuming it would cause the vCPU to get stuck in an infinite
loop during KVM_RUN because KVM would see the pending request and bail
from VM-Enter to service the request.
Note, it's currently impossible for KVM to set KVM_REQ_GPC_INVALIDATE as
nothing in KVM is wired up to set guest_uses_pa=true. But, it'd be all
too easy for arch code to introduce use of kvm_gfn_to_pfn_cache_init()
without implementing handling of the request, especially since getting
test coverage of MMU notifier interaction with specific KVM features
usually requires a directed test.
Opportunistically rename gfn_to_pfn_cache_invalidate_start()'s wake_vcpus
to evict_vcpus. The purpose of the request is to get vCPUs out of guest
mode, it's supposed to _avoid_ waking vCPUs that are blocking.
Opportunistically rename KVM_REQ_GPC_INVALIDATE to be more specific as to
what it wants to accomplish, and to genericize the name so that it can
used for similar but unrelated scenarios, should they arise in the future.
Add a comment and documentation to explain why the "no action" request
exists.
Add compile-time assertions to help detect improper usage. Use the inner
assertless helper in the one s390 path that makes requests without a
hardcoded request.
Cc: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220223165302.3205276-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If the cache's user host virtual address becomes invalid, there
is still a path from kvm_gfn_to_pfn_cache_refresh() where __release_gpc()
could release the pfn but the gpc->pfn field has not been overwritten
with an error value. If this happens, kvm_gfn_to_pfn_cache_unmap will
call put_page again on the same page.
Cc: stable@vger.kernel.org
Fixes: 982ed0de47 ("KVM: Reinstate gfn_to_pfn_cache with invalidation support")
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This reverts commit 3d3aab1b97.
Now that the KVM module's lifetime is tied to kvm.users_count, there is
no need to also tie it's lifetime to the lifetime of the VM and vCPU
file descriptors.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220303183328.1499189-3-dmatlack@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tie the lifetime the KVM module to the lifetime of each VM via
kvm.users_count. This way anything that grabs a reference to the VM via
kvm_get_kvm() cannot accidentally outlive the KVM module.
Prior to this commit, the lifetime of the KVM module was tied to the
lifetime of /dev/kvm file descriptors, VM file descriptors, and vCPU
file descriptors by their respective file_operations "owner" field.
This approach is insufficient because references grabbed via
kvm_get_kvm() do not prevent closing any of the aforementioned file
descriptors.
This fixes a long standing theoretical bug in KVM that at least affects
async page faults. kvm_setup_async_pf() grabs a reference via
kvm_get_kvm(), and drops it in an asynchronous work callback. Nothing
prevents the VM file descriptor from being closed and the KVM module
from being unloaded before this callback runs.
Fixes: af585b921e ("KVM: Halt vcpu if page it tries to access is swapped out")
Fixes: 3d3aab1b97 ("KVM: set owner of cpu and vm file operations")
Cc: stable@vger.kernel.org
Suggested-by: Ben Gardon <bgardon@google.com>
[ Based on a patch from Ben implemented for Google's kernel. ]
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220303183328.1499189-2-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allocations whose size is related to the memslot size can be arbitrarily
large. Do not use kvzalloc/kvcalloc, as those are limited to "not crazy"
sizes that fit in 32 bits.
Cc: stable@vger.kernel.org
Fixes: 7661809d49 ("mm: don't allow oversized kvmalloc() calls")
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove the generic kvm_reload_remote_mmus() and open code its
functionality into the two x86 callers. x86 is (obviously) the only
architecture that uses the hook, and is also the only architecture that
uses KVM_REQ_MMU_RELOAD in a way that's consistent with the name. That
will change in a future patch, as x86's usage when zapping a single
shadow page x86 doesn't actually _need_ to reload all vCPUs' MMUs, only
MMUs whose root is being zapped actually need to be reloaded.
s390 also uses KVM_REQ_MMU_RELOAD, but for a slightly different purpose.
Drop the generic code in anticipation of implementing s390 and x86 arch
specific requests, which will allow dropping KVM_REQ_MMU_RELOAD entirely.
Opportunistically reword the x86 TDP MMU comment to avoid making
references to functions (and requests!) when possible, and to remove the
rather ambiguous "this".
No functional change intended.
Cc: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220225182248.3812651-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
VM worker kthreads can linger in the VM process's cgroup for sometime
after KVM terminates the VM process.
KVM terminates the worker kthreads by calling kthread_stop() which waits
on the 'exited' completion, triggered by exit_mm(), via mm_release(), in
do_exit() during the kthread's exit. However, these kthreads are
removed from the cgroup using the cgroup_exit() which happens after the
exit_mm(). Therefore, A VM process can terminate in between the
exit_mm() and cgroup_exit() calls, leaving only worker kthreads in the
cgroup.
Moving worker kthreads back to the original cgroup (kthreadd_task's
cgroup) makes sure that the cgroup is empty as soon as the main VM
process is terminated.
Signed-off-by: Vipin Sharma <vipinsh@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220222054848.563321-1-vipinsh@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
I saw the below splatting after the host suspended and resumed.
WARNING: CPU: 0 PID: 2943 at kvm/arch/x86/kvm/../../../virt/kvm/kvm_main.c:5531 kvm_resume+0x2c/0x30 [kvm]
CPU: 0 PID: 2943 Comm: step_after_susp Tainted: G W IOE 5.17.0-rc3+ #4
RIP: 0010:kvm_resume+0x2c/0x30 [kvm]
Call Trace:
<TASK>
syscore_resume+0x90/0x340
suspend_devices_and_enter+0xaee/0xe90
pm_suspend.cold+0x36b/0x3c2
state_store+0x82/0xf0
kernfs_fop_write_iter+0x1b6/0x260
new_sync_write+0x258/0x370
vfs_write+0x33f/0x510
ksys_write+0xc9/0x160
do_syscall_64+0x3b/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
lockdep_is_held() can return -1 when lockdep is disabled which triggers
this warning. Let's use lockdep_assert_not_held() which can detect
incorrect calls while holding a lock and it also avoids false negatives
when lockdep is disabled.
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1644920142-81249-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The "struct kvm *kvm" parameter of kvm_make_vcpu_request() is not used,
so remove it. No functional change intended.
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Message-Id: <20220125095909.38122-19-cloudliang@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Redo incorrect fix for SEV/SMAP erratum
* Windows 11 Hyper-V workaround
Other x86 changes:
* Various x86 cleanups
* Re-enable access_tracking_perf_test
* Fix for #GP handling on SVM
* Fix for CPUID leaf 0Dh in KVM_GET_SUPPORTED_CPUID
* Fix for ICEBP in interrupt shadow
* Avoid false-positive RCU splat
* Enable Enlightened MSR-Bitmap support for real
ARM:
* Correctly update the shadow register on exception injection when
running in nVHE mode
* Correctly use the mm_ops indirection when performing cache invalidation
from the page-table walker
* Restrict the vgic-v3 workaround for SEIS to the two known broken
implementations
Generic code changes:
* Dead code cleanup
There will be another pull request for ARM fixes next week, but
those patches need a bit more soak time.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmHz5eIUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNv4wgAopj0Zlutrrtw3KT4/XnmSdMPgN0j
jQNzysSLTO5wGQCEogycjYXkGUDFu1Gdi+K91QAyjeKja20pIhPLeS2CBDRJyOc5
73K7sxqz51JnQiVFzkTuA+qzn+lXaJ9LUXtdg8BnQMSKyt2AJOqE8uT10kcYOD5q
mW4V3QUA0QpVKN0cYHv/G/zvBwQGGSLZetFbuAzwH2EDTpIi1aio5ZN1r0AoH18L
2x5kYPpqmnoBvo2cB4b7SNmxv3ZPQ5K+wta0uwZ4pO+UuYiRd84RPr5lErywJC3w
nci0eC0DoXrC6h+35UItqM8RqAGv6LADbDnr1RGojmfogSD0OtbX8y3hjw==
=iKnI
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Two larger x86 series:
- Redo incorrect fix for SEV/SMAP erratum
- Windows 11 Hyper-V workaround
Other x86 changes:
- Various x86 cleanups
- Re-enable access_tracking_perf_test
- Fix for #GP handling on SVM
- Fix for CPUID leaf 0Dh in KVM_GET_SUPPORTED_CPUID
- Fix for ICEBP in interrupt shadow
- Avoid false-positive RCU splat
- Enable Enlightened MSR-Bitmap support for real
ARM:
- Correctly update the shadow register on exception injection when
running in nVHE mode
- Correctly use the mm_ops indirection when performing cache
invalidation from the page-table walker
- Restrict the vgic-v3 workaround for SEIS to the two known broken
implementations
Generic code changes:
- Dead code cleanup"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (43 commits)
KVM: eventfd: Fix false positive RCU usage warning
KVM: nVMX: Allow VMREAD when Enlightened VMCS is in use
KVM: nVMX: Implement evmcs_field_offset() suitable for handle_vmread()
KVM: nVMX: Rename vmcs_to_field_offset{,_table}
KVM: nVMX: eVMCS: Filter out VM_EXIT_SAVE_VMX_PREEMPTION_TIMER
KVM: nVMX: Also filter MSR_IA32_VMX_TRUE_PINBASED_CTLS when eVMCS
selftests: kvm: check dynamic bits against KVM_X86_XCOMP_GUEST_SUPP
KVM: x86: add system attribute to retrieve full set of supported xsave states
KVM: x86: Add a helper to retrieve userspace address from kvm_device_attr
selftests: kvm: move vm_xsave_req_perm call to amx_test
KVM: x86: Sync the states size with the XCR0/IA32_XSS at, any time
KVM: x86: Update vCPU's runtime CPUID on write to MSR_IA32_XSS
KVM: x86: Keep MSR_IA32_XSS unchanged for INIT
KVM: x86: Free kvm_cpuid_entry2 array on post-KVM_RUN KVM_SET_CPUID{,2}
KVM: nVMX: WARN on any attempt to allocate shadow VMCS for vmcs02
KVM: selftests: Don't skip L2's VMCALL in SMM test for SVM guest
KVM: x86: Check .flags in kvm_cpuid_check_equal() too
KVM: x86: Forcibly leave nested virt when SMM state is toggled
KVM: SVM: drop unnecessary code in svm_hv_vmcb_dirty_nested_enlightenments()
KVM: SVM: hyper-v: Enable Enlightened MSR-Bitmap support for real
...
Revert a completely broken check on an "invalid" RIP in SVM's workaround
for the DecodeAssists SMAP errata. kvm_vcpu_gfn_to_memslot() obviously
expects a gfn, i.e. operates in the guest physical address space, whereas
RIP is a virtual (not even linear) address. The "fix" worked for the
problematic KVM selftest because the test identity mapped RIP.
Fully revert the hack instead of trying to translate RIP to a GPA, as the
non-SEV case is now handled earlier, and KVM cannot access guest page
tables to translate RIP.
This reverts commit e72436bc3a.
Fixes: e72436bc3a ("KVM: SVM: avoid infinite loop on NPF from bad address")
Reported-by: Liam Merwick <liam.merwick@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Message-Id: <20220120010719.711476-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The async parameter of hva_to_pfn_remapped() is not used, so remove it.
Signed-off-by: Xianting Tian <xianting.tian@linux.alibaba.com>
Message-Id: <20220124020456.156386-1-xianting.tian@linux.alibaba.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- selftest compilation fix for non-x86
- KVM: avoid warning on s390 in mark_page_dirty
x86:
- fix page write-protection bug and improve comments
- use binary search to lookup the PMU event filter, add test
- enable_pmu module parameter support for Intel CPUs
- switch blocked_vcpu_on_cpu_lock to raw spinlock
- cleanups of blocked vCPU logic
- partially allow KVM_SET_CPUID{,2} after KVM_RUN (5.16 regression)
- various small fixes
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmHpmT0UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOstggAi1VSpT43oGslQjXNDZacHEARoYQs
b0XpoW7HXicGSGRMWspCmiAPdJyYTsioEACttAmXUMs7brAgHb9n/vzdlcLh1ymL
rQw2YFQlfqqB1Ki1iRhNkWlH9xOECsu28WLng6ylrx51GuT/pzWRt+V3EGUFTxIT
ldW9HgZg2oFJIaLjg2hQVR/8EbBf0QdsAD3KV3tyvhBlXPkyeLOMcGe9onfjZ/NE
JQeW7FtKtP4SsIFt1KrJpDPjtiwFt3bRM0gfgGw7//clvtKIqt1LYXZiq4C3b7f5
tfYiC8lO2vnOoYcfeYEmvybbSsoS/CgSliZB32qkwoVvRMIl82YmxtDD+Q==
=/Mak
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more kvm updates from Paolo Bonzini:
"Generic:
- selftest compilation fix for non-x86
- KVM: avoid warning on s390 in mark_page_dirty
x86:
- fix page write-protection bug and improve comments
- use binary search to lookup the PMU event filter, add test
- enable_pmu module parameter support for Intel CPUs
- switch blocked_vcpu_on_cpu_lock to raw spinlock
- cleanups of blocked vCPU logic
- partially allow KVM_SET_CPUID{,2} after KVM_RUN (5.16 regression)
- various small fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (46 commits)
docs: kvm: fix WARNINGs from api.rst
selftests: kvm/x86: Fix the warning in lib/x86_64/processor.c
selftests: kvm/x86: Fix the warning in pmu_event_filter_test.c
kvm: selftests: Do not indent with spaces
kvm: selftests: sync uapi/linux/kvm.h with Linux header
selftests: kvm: add amx_test to .gitignore
KVM: SVM: Nullify vcpu_(un)blocking() hooks if AVIC is disabled
KVM: SVM: Move svm_hardware_setup() and its helpers below svm_x86_ops
KVM: SVM: Drop AVIC's intermediate avic_set_running() helper
KVM: VMX: Don't do full kick when handling posted interrupt wakeup
KVM: VMX: Fold fallback path into triggering posted IRQ helper
KVM: VMX: Pass desired vector instead of bool for triggering posted IRQ
KVM: VMX: Don't do full kick when triggering posted interrupt "fails"
KVM: SVM: Skip AVIC and IRTE updates when loading blocking vCPU
KVM: SVM: Use kvm_vcpu_is_blocking() in AVIC load to handle preemption
KVM: SVM: Remove unnecessary APICv/AVIC update in vCPU unblocking path
KVM: SVM: Don't bother checking for "running" AVIC when kicking for IPIs
KVM: SVM: Signal AVIC doorbell iff vCPU is in guest mode
KVM: x86: Remove defunct pre_block/post_block kvm_x86_ops hooks
KVM: x86: Unexport LAPIC's switch_to_{hv,sw}_timer() helpers
...
Move the seemingly generic block_vcpu_list from kvm_vcpu to vcpu_vmx, and
rename the list and all associated variables to clarify that it tracks
the set of vCPU that need to be poked on a posted interrupt to the wakeup
vector. The list is not used to track _all_ vCPUs that are blocking, and
the term "blocked" can be misleading as it may refer to a blocking
condition in the host or the guest, where as the PI wakeup case is
specifically for the vCPUs that are actively blocking from within the
guest.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20211208015236.1616697-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Remove kvm_vcpu.pre_pcpu as it no longer has any users. No functional
change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20211208015236.1616697-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Avoid warnings on s390 like
[ 1801.980931] CPU: 12 PID: 117600 Comm: kworker/12:0 Tainted: G E 5.17.0-20220113.rc0.git0.32ce2abb03cf.300.fc35.s390x+next #1
[ 1801.980938] Workqueue: events irqfd_inject [kvm]
[...]
[ 1801.981057] Call Trace:
[ 1801.981060] [<000003ff805f0f5c>] mark_page_dirty_in_slot+0xa4/0xb0 [kvm]
[ 1801.981083] [<000003ff8060e9fe>] adapter_indicators_set+0xde/0x268 [kvm]
[ 1801.981104] [<000003ff80613c24>] set_adapter_int+0x64/0xd8 [kvm]
[ 1801.981124] [<000003ff805fb9aa>] kvm_set_irq+0xc2/0x130 [kvm]
[ 1801.981144] [<000003ff805f8d86>] irqfd_inject+0x76/0xa0 [kvm]
[ 1801.981164] [<0000000175e56906>] process_one_work+0x1fe/0x470
[ 1801.981173] [<0000000175e570a4>] worker_thread+0x64/0x498
[ 1801.981176] [<0000000175e5ef2c>] kthread+0x10c/0x110
[ 1801.981180] [<0000000175de73c8>] __ret_from_fork+0x40/0x58
[ 1801.981185] [<000000017698440a>] ret_from_fork+0xa/0x40
when writing to a guest from an irqfd worker as long as we do not have
the dirty ring.
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reluctantly-acked-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20220113122924.740496-1-borntraeger@linux.ibm.com>
Fixes: 2efd61a608 ("KVM: Warn if mark_page_dirty() is called without an active vCPU")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Use common KVM implementation of MMU memory caches
- SBI v0.2 support for Guest
- Initial KVM selftests support
- Fix to avoid spurious virtual interrupts after clearing hideleg CSR
- Update email address for Anup and Atish
ARM:
- Simplification of the 'vcpu first run' by integrating it into
KVM's 'pid change' flow
- Refactoring of the FP and SVE state tracking, also leading to
a simpler state and less shared data between EL1 and EL2 in
the nVHE case
- Tidy up the header file usage for the nvhe hyp object
- New HYP unsharing mechanism, finally allowing pages to be
unmapped from the Stage-1 EL2 page-tables
- Various pKVM cleanups around refcounting and sharing
- A couple of vgic fixes for bugs that would trigger once
the vcpu xarray rework is merged, but not sooner
- Add minimal support for ARMv8.7's PMU extension
- Rework kvm_pgtable initialisation ahead of the NV work
- New selftest for IRQ injection
- Teach selftests about the lack of default IPA space and
page sizes
- Expand sysreg selftest to deal with Pointer Authentication
- The usual bunch of cleanups and doc update
s390:
- fix sigp sense/start/stop/inconsistency
- cleanups
x86:
- Clean up some function prototypes more
- improved gfn_to_pfn_cache with proper invalidation, used by Xen emulation
- add KVM_IRQ_ROUTING_XEN_EVTCHN and event channel delivery
- completely remove potential TOC/TOU races in nested SVM consistency checks
- update some PMCs on emulated instructions
- Intel AMX support (joint work between Thomas and Intel)
- large MMU cleanups
- module parameter to disable PMU virtualization
- cleanup register cache
- first part of halt handling cleanups
- Hyper-V enlightened MSR bitmap support for nested hypervisors
Generic:
- clean up Makefiles
- introduce CONFIG_HAVE_KVM_DIRTY_RING
- optimize memslot lookup using a tree
- optimize vCPU array usage by converting to xarray
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmHhxvsUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPZkAf+Nz92UL/5nNGcdHtE4m7AToMmitE9
bYkesf9BMQvAe5wjkABLuoHGi6ay4jabo4fiGzbdkiK7lO5YgfsWiMB3/MT5fl4E
jRPzaVQabp3YZLM8UYCBmfUVuRj524S967SfSRe0AvYjDEH8y7klPf4+7sCsFT0/
Px9Vf2KGuOlf0eM78yKg4rGaF0jS22eLgXm6FfNMY8/e29ZAo/jyUmqBY+Z2xxZG
aWhceDtSheW1jwLHLj3nOlQJvHTn8LVGXBE/R8Gda3ZjrBV2rKaDi4Fh+HD+dz86
2zVXwzQ7uck2CMW73GMoXMTWoKSHMyvlBOs1BdvBm4UsnGcXR+q8IFCeuQ==
=s73m
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"RISCV:
- Use common KVM implementation of MMU memory caches
- SBI v0.2 support for Guest
- Initial KVM selftests support
- Fix to avoid spurious virtual interrupts after clearing hideleg CSR
- Update email address for Anup and Atish
ARM:
- Simplification of the 'vcpu first run' by integrating it into KVM's
'pid change' flow
- Refactoring of the FP and SVE state tracking, also leading to a
simpler state and less shared data between EL1 and EL2 in the nVHE
case
- Tidy up the header file usage for the nvhe hyp object
- New HYP unsharing mechanism, finally allowing pages to be unmapped
from the Stage-1 EL2 page-tables
- Various pKVM cleanups around refcounting and sharing
- A couple of vgic fixes for bugs that would trigger once the vcpu
xarray rework is merged, but not sooner
- Add minimal support for ARMv8.7's PMU extension
- Rework kvm_pgtable initialisation ahead of the NV work
- New selftest for IRQ injection
- Teach selftests about the lack of default IPA space and page sizes
- Expand sysreg selftest to deal with Pointer Authentication
- The usual bunch of cleanups and doc update
s390:
- fix sigp sense/start/stop/inconsistency
- cleanups
x86:
- Clean up some function prototypes more
- improved gfn_to_pfn_cache with proper invalidation, used by Xen
emulation
- add KVM_IRQ_ROUTING_XEN_EVTCHN and event channel delivery
- completely remove potential TOC/TOU races in nested SVM consistency
checks
- update some PMCs on emulated instructions
- Intel AMX support (joint work between Thomas and Intel)
- large MMU cleanups
- module parameter to disable PMU virtualization
- cleanup register cache
- first part of halt handling cleanups
- Hyper-V enlightened MSR bitmap support for nested hypervisors
Generic:
- clean up Makefiles
- introduce CONFIG_HAVE_KVM_DIRTY_RING
- optimize memslot lookup using a tree
- optimize vCPU array usage by converting to xarray"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (268 commits)
x86/fpu: Fix inline prefix warnings
selftest: kvm: Add amx selftest
selftest: kvm: Move struct kvm_x86_state to header
selftest: kvm: Reorder vcpu_load_state steps for AMX
kvm: x86: Disable interception for IA32_XFD on demand
x86/fpu: Provide fpu_sync_guest_vmexit_xfd_state()
kvm: selftests: Add support for KVM_CAP_XSAVE2
kvm: x86: Add support for getting/setting expanded xstate buffer
x86/fpu: Add uabi_size to guest_fpu
kvm: x86: Add CPUID support for Intel AMX
kvm: x86: Add XCR0 support for Intel AMX
kvm: x86: Disable RDMSR interception of IA32_XFD_ERR
kvm: x86: Emulate IA32_XFD_ERR for guest
kvm: x86: Intercept #NM for saving IA32_XFD_ERR
x86/fpu: Prepare xfd_err in struct fpu_guest
kvm: x86: Add emulation for IA32_XFD
x86/fpu: Provide fpu_update_guest_xfd() for IA32_XFD emulation
kvm: x86: Enable dynamic xfeatures at KVM_SET_CPUID2
x86/fpu: Provide fpu_enable_guest_xfd_features() for KVM
x86/fpu: Add guest support to xfd_enable_feature()
...
"Cleanup of the perf/kvm interaction."
-----BEGIN PGP SIGNATURE-----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=tU5G
-----END PGP SIGNATURE-----
Merge tag 'perf_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Borislav Petkov:
"Cleanup of the perf/kvm interaction."
* tag 'perf_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Drop guest callback (un)register stubs
KVM: arm64: Drop perf.c and fold its tiny bits of code into arm.c
KVM: arm64: Hide kvm_arm_pmu_available behind CONFIG_HW_PERF_EVENTS=y
KVM: arm64: Convert to the generic perf callbacks
KVM: x86: Move Intel Processor Trace interrupt handler to vmx.c
KVM: Move x86's perf guest info callbacks to generic KVM
KVM: x86: More precisely identify NMI from guest when handling PMI
KVM: x86: Drop current_vcpu for kvm_running_vcpu + kvm_arch_vcpu variable
perf/core: Use static_call to optimize perf_guest_info_callbacks
perf: Force architectures to opt-in to guest callbacks
perf: Add wrappers for invoking guest callbacks
perf/core: Rework guest callbacks to prepare for static_call support
perf: Drop dead and useless guest "support" from arm, csky, nds32 and riscv
perf: Stop pretending that perf can handle multiple guest callbacks
KVM: x86: Register Processor Trace interrupt hook iff PT enabled in guest
KVM: x86: Register perf callbacks after calling vendor's hardware_setup()
perf: Protect perf_guest_cbs with RCU
This can be used in two modes. There is an atomic mode where the cached
mapping is accessed while holding the rwlock, and a mode where the
physical address is used by a vCPU in guest mode.
For the latter case, an invalidation will wake the vCPU with the new
KVM_REQ_GPC_INVALIDATE, and the architecture will need to refresh any
caches it still needs to access before entering guest mode again.
Only one vCPU can be targeted by the wake requests; it's simple enough
to make it wake all vCPUs or even a mask but I don't see a use case for
that additional complexity right now.
Invalidation happens from the invalidate_range_start MMU notifier, which
needs to be able to sleep in order to wake the vCPU and wait for it.
This means that revalidation potentially needs to "wait" for the MMU
operation to complete and the invalidate_range_end notifier to be
invoked. Like the vCPU when it takes a page fault in that period, we
just spin — fixing that in a future patch by implementing an actual
*wait* may be another part of shaving this particularly hirsute yak.
As noted in the comments in the function itself, the only case where
the invalidate_range_start notifier is expected to be called *without*
being able to sleep is when the OOM reaper is killing the process. In
that case, we expect the vCPU threads already to have exited, and thus
there will be nothing to wake, and no reason to wait. So we clear the
KVM_REQUEST_WAIT bit and send the request anyway, then complain loudly
if there actually *was* anything to wake up.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20211210163625.2886-3-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The various kvm_write_guest() and mark_page_dirty() functions must only
ever be called in the context of an active vCPU, because if dirty ring
tracking is enabled it may simply oops when kvm_get_running_vcpu()
returns NULL for the vcpu and then kvm_dirty_ring_get() dereferences it.
This oops was reported by "butt3rflyh4ck" <butterflyhuangxx@gmail.com> in
https://lore.kernel.org/kvm/CAFcO6XOmoS7EacN_n6v4Txk7xL7iqRa2gABg3F7E3Naf5uG94g@mail.gmail.com/
That actual bug will be fixed under separate cover but this warning
should help to prevent new ones from being added.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20211210163625.2886-2-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Splitting kvm_main.c out into smaller and better-organized files is
slightly non-trivial when it involves editing a bunch of per-arch
KVM makefiles. Provide virt/kvm/Makefile.kvm for them to include.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Marc Zyngier <maz@kernel.org>
Message-Id: <20211121125451.9489-3-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
I'd like to make the build include dirty_ring.c based on whether the
arch wants it or not. That's a whole lot simpler if there's a config
symbol instead of doing it implicitly on KVM_DIRTY_LOG_PAGE_OFFSET
being set to something non-zero.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20211121125451.9489-2-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add helpers to wake and query a blocking vCPU. In addition to providing
nice names, the helpers reduce the probability of KVM neglecting to use
kvm_arch_vcpu_get_wait().
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-20-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Calculate the halt-polling "stop" time using "start" instead of redoing
ktime_get(). In practice, the numbers involved are in the noise (e.g.,
in the happy case where hardware correctly predicts do_halt_poll and
there are no interrupts, "start" is probably only a few cycles old)
and either approach is perfectly ok. But it's more precise to count
any extra latency toward the halt-polling time.
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-17-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a "blocking" stat that userspace can use to detect the case where a
vCPU is not being run because of an vCPU/guest action, e.g. HLT or WFS on
x86, WFI on arm64, etc... Current guest/host/halt stats don't show this
well, e.g. if a guest halts for a long period of time then the vCPU could
could appear pathologically blocked due to a host condition, when in
reality the vCPU has been put into a not-runnable state by the guest.
Originally-by: Cannon Matthews <cannonmatthews@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Jing Zhang <jingzhangos@google.com>
[sean: renamed stat to "blocking", massaged changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-16-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Factor out the "block" part of kvm_vcpu_halt() so that x86 can emulate
non-halt wait/sleep/block conditions that should not be subjected to
halt-polling.
No functional change intended.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-15-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename kvm_vcpu_block() to kvm_vcpu_halt() in preparation for splitting
the actual "block" sequences into a separate helper (to be named
kvm_vcpu_block()). x86 will use the standalone block-only path to handle
non-halt cases where the vCPU is not runnable.
Rename block_ns to halt_ns to match the new function name.
No functional change intended.
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-14-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop kvm_arch_vcpu_block_finish() now that all arch implementations are
nops.
No functional change intended.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Invoke the arch hooks for block+unblock if and only if KVM actually
attempts to block the vCPU. The only non-nop implementation is on x86,
specifically SVM's AVIC, and there is no need to put the AVIC prior to
halt-polling; KVM x86's kvm_vcpu_has_events() will scour the full vIRR
to find pending IRQs regardless of whether the AVIC is loaded/"running".
The primary motivation is to allow future cleanup to split out "block"
from "halt", but this is also likely a small performance boost on x86 SVM
when halt-polling is successful.
Adjust the post-block path to update "cur" after unblocking, i.e. include
AVIC load time in halt_wait_ns and halt_wait_hist, so that the behavior
is consistent. Moving just the pre-block arch hook would result in only
the AVIC put latency being included in the halt_wait stats. There is no
obvious evidence that one way or the other is correct, so just ensure KVM
is consistent.
Note, x86 has two separate paths for handling APICv with respect to vCPU
blocking. VMX uses hooks in x86's vcpu_block(), while SVM uses the arch
hooks in kvm_vcpu_block(). Prior to this path, the two paths were more
or less functionally identical. That is very much not the case after
this patch, as the hooks used by VMX _must_ fire before halt-polling.
x86's entire mess will be cleaned up in future patches.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-12-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the halt-polling "success" and histogram stats update into the
dedicated helper to fix a discrepancy where the success/fail "time" stats
consider polling successful so long as the wait is avoided, but the main
"success" and histogram stats consider polling successful if and only if
a wake event was detected by the halt-polling loop.
Move halt_attempted_poll to the helper as well so that all the stats are
updated in a single location. While it's a bit odd to update the stat
well after the fact, practically speaking there's no meaningful advantage
to updating before polling.
Note, there is a functional change in addition to the success vs. fail
change. The histogram updates previously called ktime_get() instead of
using "cur". But that change is desirable as it means all the stats are
now updated with the same polling time, and avoids the extra ktime_get(),
which isn't expensive but isn't free either.
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-8-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a comment to document that halt-polling is considered successful even
if the polling loop itself didn't detect a wake event, i.e. if a wake
event was detect in the final kvm_vcpu_check_block(). Invert the param
to update helper so that the helper is a dumb function that is "told"
whether or not polling was successful, as opposed to determining success
based on blocking behavior.
Opportunistically tweak the params to the update helper to reduce the
line length for the call site so that it fits on a single line, and so
that the prototype conforms to the more traditional kernel style.
No functional change intended.
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Don't update halt-polling stats if halt-polling wasn't attempted. This is
a nop as @poll_ns is guaranteed to be '0' (poll_end == start); in a future
patch (to move the histogram stats into the helper), it will avoid to
avoid a discrepancy in what is considered a "successful" halt-poll.
No functional change intended.
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not define/reference kvm_vcpu.wait if __KVM_HAVE_ARCH_WQP is true, and
instead force the architecture (PPC) to define its own rcuwait object.
Allowing common KVM to directly access vcpu->wait without a guard makes
it all too easy to introduce potential bugs, e.g. kvm_vcpu_block(),
kvm_vcpu_on_spin(), and async_pf_execute() all operate on vcpu->wait, not
the result of kvm_arch_vcpu_get_wait(), and so may do the wrong thing for
PPC.
Due to PPC's shenanigans with respect to callbacks and waits (it switches
to the virtual core's wait object at KVM_RUN!?!?), it's not clear whether
or not this fixes any bugs.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Wrap s390's halt_poll_max_steal with READ_ONCE and snapshot the result of
kvm_arch_no_poll() in kvm_vcpu_block() to avoid a mostly-theoretical,
largely benign bug on s390 where the result of kvm_arch_no_poll() could
change due to userspace modifying halt_poll_max_steal while the vCPU is
blocking. The bug is largely benign as it will either cause KVM to skip
updating halt-polling times (no_poll toggles false=>true) or to update
halt-polling times with a slightly flawed block_ns.
Note, READ_ONCE is unnecessary in the current code, add it in case the
arch hook is ever inlined, and to provide a hint that userspace can
change the param at will.
Fixes: 8b905d28ee ("KVM: s390: provide kvm_arch_no_poll function")
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211009021236.4122790-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If we do have the vcpu mutex, as is the case if kvm_running_vcpu is set
to the target vcpu of the kick, changes to vcpu->mode do not need atomic
operations; cmpxchg is only needed _outside_ the mutex to ensure that
the IN_GUEST_MODE->EXITING_GUEST_MODE change does not race with the vcpu
thread going OUTSIDE_GUEST_MODE.
Use this to optimize the case of a vCPU sending an interrupt to itself.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In preparation for implementing in-place hugepage promotion, various
functions will need to be called from zap_collapsible_spte_range, which
has the const qualifier on its memslot argument. Propagate the const
qualifier to the various functions which will be needed. This just serves
to simplify the following patch.
No functional change intended.
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20211115234603.2908381-11-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allocate the "new" memslot for !DELETE memslot updates straight away
instead of filling an intermediate on-stack object and forcing
kvm_set_memslot() to juggle the allocation and do weird things like reuse
the old memslot object in MOVE.
In the MOVE case, this results in an "extra" memslot allocation due to
allocating both the "new" slot and the "invalid" slot, but that's a
temporary and not-huge allocation, and MOVE is a relatively rare memslot
operation.
Regarding MOVE, drop the open-coded management of the gfn tree with a
call to kvm_replace_memslot(), which already handles the case where
new->base_gfn != old->base_gfn. This is made possible by virtue of not
having to copy the "new" memslot data after erasing the old memslot from
the gfn tree. Using kvm_replace_memslot(), and more specifically not
reusing the old memslot, means the MOVE case now does hva tree and hash
list updates, but that's a small price to pay for simplifying the code
and making MOVE align with all the other flavors of updates. The "extra"
updates are firmly in the noise from a performance perspective, e.g. the
"move (in)active area" selfttests show a (very, very) slight improvement.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <f0d8c72727aa825cf682bd4e3da4b3fa68215dd4.1638817641.git.maciej.szmigiero@oracle.com>
Initialize the "new" memslot in the !DELETE path only after the various
sanity checks have passed. This will allow a future commit to allocate
@new dynamically without having to copy a memslot, and without having to
deal with freeing @new in error paths and in the "nothing to change" path
that's hiding in the sanity checks.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <a084d0531ca3a826a7f861eb2b08b5d1c06ef265.1638817641.git.maciej.szmigiero@oracle.com>
Do a quick lookup for possibly overlapping gfns when creating or moving
a memslot instead of performing a linear scan of the whole memslot set.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
[sean: tweaked params to avoid churn in future cleanup]
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <a4795e5c2f624754e9c0aab023ebda1966feb3e1.1638817641.git.maciej.szmigiero@oracle.com>
kvm_invalidate_memslot() calls kvm_arch_flush_shadow_memslot() on the
active, but KVM_MEMSLOT_INVALID slot.
Do it on the inactive (but valid) old slot instead since arch code really
should not get passed such invalid slot.
Note that this means that the "arch" field of the slot provided to
kvm_arch_flush_shadow_memslot() may have stale data since this function
is called with slots_arch_lock released.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <813595ecc193d6ae39a87709899d4251523b05f8.1638817641.git.maciej.szmigiero@oracle.com>
The current memslot code uses a (reverse gfn-ordered) memslot array for
keeping track of them.
Because the memslot array that is currently in use cannot be modified
every memslot management operation (create, delete, move, change flags)
has to make a copy of the whole array so it has a scratch copy to work on.
Strictly speaking, however, it is only necessary to make copy of the
memslot that is being modified, copying all the memslots currently present
is just a limitation of the array-based memslot implementation.
Two memslot sets, however, are still needed so the VM continues to run
on the currently active set while the requested operation is being
performed on the second, currently inactive one.
In order to have two memslot sets, but only one copy of actual memslots
it is necessary to split out the memslot data from the memslot sets.
The memslots themselves should be also kept independent of each other
so they can be individually added or deleted.
These two memslot sets should normally point to the same set of
memslots. They can, however, be desynchronized when performing a
memslot management operation by replacing the memslot to be modified
by its copy. After the operation is complete, both memslot sets once
again point to the same, common set of memslot data.
This commit implements the aforementioned idea.
For tracking of gfns an ordinary rbtree is used since memslots cannot
overlap in the guest address space and so this data structure is
sufficient for ensuring that lookups are done quickly.
The "last used slot" mini-caches (both per-slot set one and per-vCPU one),
that keep track of the last found-by-gfn memslot, are still present in the
new code.
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <17c0cf3663b760a0d3753d4ac08c0753e941b811.1638817641.git.maciej.szmigiero@oracle.com>
The current memslots implementation only allows quick binary search by gfn,
quick lookup by hva is not possible - the implementation has to do a linear
scan of the whole memslots array, even though the operation being performed
might apply just to a single memslot.
This significantly hurts performance of per-hva operations with higher
memslot counts.
Since hva ranges can overlap between memslots an interval tree is needed
for tracking them.
[sean: handle interval tree updates in kvm_replace_memslot()]
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <d66b9974becaa9839be9c4e1a5de97b177b4ac20.1638817640.git.maciej.szmigiero@oracle.com>
Memslot ID to the corresponding memslot mappings are currently kept as
indices in static id_to_index array.
The size of this array depends on the maximum allowed memslot count
(regardless of the number of memslots actually in use).
This has become especially problematic recently, when memslot count cap was
removed, so the maximum count is now full 32k memslots - the maximum
allowed by the current KVM API.
Keeping these IDs in a hash table (instead of an array) avoids this
problem.
Resolving a memslot ID to the actual memslot (instead of its index) will
also enable transitioning away from an array-based implementation of the
whole memslots structure in a later commit.
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <117fb2c04320e6cd6cf34f205a72eadb0aa8d5f9.1638817640.git.maciej.szmigiero@oracle.com>
Since kvm_memslot_move_forward() can theoretically return a negative
memslot index even when kvm_memslot_move_backward() returned a positive one
(and so did not WARN) let's just move the warning to the common code.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <eeed890ccb951e7b0dce15bc170eb2661d5b02da.1638817640.git.maciej.szmigiero@oracle.com>
s390 arch has gfn_to_memslot_approx() which is almost identical to
search_memslots(), differing only in that in case the gfn falls in a hole
one of the memslots bordering the hole is returned.
Add this lookup mode as an option to search_memslots() so we don't have two
almost identical functions for looking up a memslot by its gfn.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
[sean: tweaked helper names to keep gfn_to_memslot_approx() in s390]
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <171cd89b52c718dbe180ecd909b4437a64a7e2ec.1638817640.git.maciej.szmigiero@oracle.com>
Stop making a full copy of the old memslot in __kvm_set_memory_region()
now that metadata updates are handled by kvm_set_memslot(), i.e. now that
the old memslot's dirty bitmap doesn't need to be referenced after the
memslot and its pointer is modified/invalidated by kvm_set_memslot().
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <5dce0946b41bba8c83f6e3424c6955c56bcc9f86.1638817640.git.maciej.szmigiero@oracle.com>
Handle the generic memslot metadata, a.k.a. dirty bitmap, updates at the
same time that arch handles it's own metadata updates, i.e. at memslot
prepare and commit. This will simplify converting @new to a dynamically
allocated object, and more closely aligns common KVM with architecture
code.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <2ddd5446e3706fe3c1e52e3df279f04c458be830.1638817640.git.maciej.szmigiero@oracle.com>
Drop the @mem param from kvm_arch_{prepare,commit}_memory_region() now
that its use has been removed in all architectures.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <aa5ed3e62c27e881d0d8bc0acbc1572bc336dc19.1638817640.git.maciej.szmigiero@oracle.com>
Pass the "old" slot to kvm_arch_prepare_memory_region() and force arch
code to handle propagating arch specific data from "new" to "old" when
necessary. This is a baby step towards dynamically allocating "new" from
the get go, and is a (very) minor performance boost on x86 due to not
unnecessarily copying arch data.
For PPC HV, copy the rmap in the !CREATE and !DELETE paths, i.e. for MOVE
and FLAGS_ONLY. This is functionally a nop as the previous behavior
would overwrite the pointer for CREATE, and eventually discard/ignore it
for DELETE.
For x86, copy the arch data only for FLAGS_ONLY changes. Unlike PPC HV,
x86 needs to reallocate arch data in the MOVE case as the size of x86's
allocations depend on the alignment of the memslot's gfn.
Opportunistically tweak kvm_arch_prepare_memory_region()'s param order to
match the "commit" prototype.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
[mss: add missing RISCV kvm_arch_prepare_memory_region() change]
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <67dea5f11bbcfd71e3da5986f11e87f5dd4013f9.1638817639.git.maciej.szmigiero@oracle.com>
Now that the address space ID is stored in every slot, including fake
slots used for deletion, use the slot's as_id instead of passing in the
redundant information as a param to kvm_set_memslot(). This will greatly
simplify future memslot work by avoiding passing a large number of
variables around purely to honor @as_id.
Drop a comment in the DELETE path about new->as_id being provided purely
for debug, as that's now a lie.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <03189577be214ab8530a4b3a3ee3ed1c2f9e5815.1638817639.git.maciej.szmigiero@oracle.com>
There is no need to copy the whole memslot data after releasing
slots_arch_lock for a moment to install temporary memslots copy in
kvm_set_memslot() since this lock only protects the arch field of each
memslot.
Just resync this particular field after reacquiring slots_arch_lock.
Note, this also eliminates the need to manually clear the INVALID flag
when restoring memslots; the "setting" of the INVALID flag was an
unwanted side effect of copying the entire memslots.
Since kvm_copy_memslots() has just one caller remaining now
open-code it instead.
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
[sean: tweak shortlog, note INVALID flag in changelog, revert comment]
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <b63035d114707792e9042f074478337f770dff6a.1638817638.git.maciej.szmigiero@oracle.com>
Fold kvm_delete_memslot() into __kvm_set_memory_region() to free up the
"kvm_delete_memslot()" name for use in a future helper. The delete logic
isn't so complex/long that it truly needs a helper, and it will be
simplified a wee bit further in upcoming commits.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <2887631c31a82947faa488ab72f55f8c68b7c194.1638817638.git.maciej.szmigiero@oracle.com>
Explicitly disallow creating more memslot pages than can fit in an
unsigned long, KVM doesn't correctly handle a total number of memslot
pages that doesn't fit in an unsigned long and remedying that would be a
waste of time.
For a 64-bit kernel, this is a nop as memslots are not allowed to overlap
in the gfn address space.
With a 32-bit kernel, userspace can at most address 3gb of virtual memory,
whereas wrapping the total number of pages would require 4tb+ of guest
physical memory. Even with x86's second address space for SMM, userspace
would need to alias all of guest memory more than one _thousand_ times.
And on older x86 hardware with MAXPHYADDR < 43, the guest couldn't
actually access any of those aliases even if userspace lied about
guest.MAXPHYADDR.
On 390 and arm64, this is a nop as they don't support 32-bit hosts.
On x86, practically speaking this is simply acknowledging reality as the
existing kvm_mmu_calculate_default_mmu_pages() assumes the total number
of pages fits in an "unsigned long".
On PPC, this is likely a nop as every flavor of PPC KVM assumes gfns (and
gpas!) fit in unsigned long. arch/powerpc/kvm/book3s_32_mmu_host.c goes
a step further and fails the build if CONFIG_PTE_64BIT=y, which
presumably means that it does't support 64-bit physical addresses.
On MIPS, this is also likely a nop as the core MMU helpers assume gpas
fit in unsigned long, e.g. see kvm_mips_##name##_pte.
And finally, RISC-V is a "don't care" as it doesn't exist in any release,
i.e. there is no established ABI to break.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <1c2c91baf8e78acccd4dad38da591002e61c013c.1638817638.git.maciej.szmigiero@oracle.com>
Everywhere we use kvm_for_each_vpcu(), we use an int as the vcpu
index. Unfortunately, we're about to move rework the iterator,
which requires this to be upgrade to an unsigned long.
Let's bite the bullet and repaint all of it in one go.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Message-Id: <20211116160403.4074052-7-maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
At least on arm64 and x86, the vcpus array is pretty huge (up to
1024 entries on x86) and is mostly empty in the majority of the cases
(running 1k vcpu VMs is not that common).
This mean that we end-up with a 4kB block of unused memory in the
middle of the kvm structure.
Instead of wasting away this memory, let's use an xarray instead,
which gives us almost the same flexibility as a normal array, but
with a reduced memory usage with smaller VMs.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Message-Id: <20211116160403.4074052-6-maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All architectures have similar loops iterating over the vcpus,
freeing one vcpu at a time, and eventually wiping the reference
off the vcpus array. They are also inconsistently taking
the kvm->lock mutex when wiping the references from the array.
Make this code common, which will simplify further changes.
The locking is dropped altogether, as this should only be called
when there is no further references on the kvm structure.
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Message-Id: <20211116160403.4074052-2-maz@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is not an unrecoverable situation. Users of kvm_read_guest_offset_cached
and kvm_write_guest_offset_cached must expect the read/write to fail, and
therefore it is possible to just return early with an error value.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reject userspace memslots whose size exceeds the storage capacity of an
"unsigned long". KVM's uAPI takes the size as u64 to support large slots
on 64-bit hosts, but does not account for the size being truncated on
32-bit hosts in various flows. The access_ok() check on the userspace
virtual address in particular casts the size to "unsigned long" and will
check the wrong number of bytes.
KVM doesn't actually support slots whose size doesn't fit in an "unsigned
long", e.g. KVM's internal kvm_memory_slot.npages is an "unsigned long",
not a "u64", and misc arch specific code follows that behavior.
Fixes: fa3d315a4c ("KVM: Validate userspace_addr of memslot when registered")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Message-Id: <20211104002531.1176691-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When modifying memslots, snapshot the "old" memslot and copy it to the
"new" memslot's arch data after (re)acquiring slots_arch_lock. x86 can
change a memslot's arch data while memslot updates are in-progress so
long as it holds slots_arch_lock, thus snapshotting a memslot without
holding the lock can result in the consumption of stale data.
Fixes: b10a038e84 ("KVM: mmu: Add slots_arch_lock for memslot arch fields")
Cc: stable@vger.kernel.org
Cc: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20211104002531.1176691-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
* Fixes for Xen emulation
* Kill kvm_map_gfn() / kvm_unmap_gfn() and broken gfn_to_pfn_cache
* Fixes for migration of 32-bit nested guests on 64-bit hypervisor
* Compilation fixes
* More SEV cleanups
In commit 7e2175ebd6 ("KVM: x86: Fix recording of guest steal time /
preempted status") I removed the only user of these functions because
it was basically impossible to use them safely.
There are two stages to the GFN->PFN mapping; first through the KVM
memslots to a userspace HVA and then through the page tables to
translate that HVA to an underlying PFN. Invalidations of the former
were being handled correctly, but no attempt was made to use the MMU
notifiers to invalidate the cache when the HVA->GFN mapping changed.
As a prelude to reinventing the gfn_to_pfn_cache with more usable
semantics, rip it out entirely and untangle the implementation of
the unsafe kvm_vcpu_map()/kvm_vcpu_unmap() functions from it.
All current users of kvm_vcpu_map() also look broken right now, and
will be dealt with separately. They broadly fall into two classes:
* Those which map, access the data and immediately unmap. This is
mostly gratuitous and could just as well use the existing user
HVA, and could probably benefit from a gfn_to_hva_cache as they
do so.
* Those which keep the mapping around for a longer time, perhaps
even using the PFN directly from the guest. These will need to
be converted to the new gfn_to_pfn_cache and then kvm_vcpu_map()
can be removed too.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20211115165030.7422-8-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move x86's perf guest callbacks into common KVM, as they are semantically
identical to arm64's callbacks (the only other such KVM callbacks).
arm64 will convert to the common versions in a future patch.
Implement the necessary arm64 arch hooks now to avoid having to provide
stubs or a temporary #define (from x86) to avoid arm64 compilation errors
when CONFIG_GUEST_PERF_EVENTS=y.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211111020738.2512932-13-seanjc@google.com
Generalize KVM_REQ_VM_BUGGED so that it can be called even in cases
where it is by design that the VM cannot be operated upon. In this
case any KVM_BUG_ON should still warn, so introduce a new flag
kvm->vm_dead that is separate from kvm->vm_bugged.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All of the irqfds would to be updated when update the irq
routing, it's too expensive if there're too many irqfds.
However we can reduce the cost by avoid some unnecessary
updates. For irqs of MSI type on X86, the update can be
saved if the msi values are not change.
The vfio migration could receives benefit from this optimi-
zaiton. The test VM has 128 vcpus and 8 VF (with 65 vectors
enabled), so the VM has more than 520 irqfds. We mesure the
cost of the vfio_msix_enable (in QEMU, it would set routing
for each irqfd) for each VF, and we can see the total cost
can be significantly reduced.
Origin Apply this Patch
1st 8 4
2nd 15 5
3rd 22 6
4th 24 6
5th 36 7
6th 44 7
7th 51 8
8th 58 8
Total 258ms 51ms
We're also tring to optimize the QEMU part [1], but it's still
worth to optimize the KVM to gain more benefits.
[1] https://lists.gnu.org/archive/html/qemu-devel/2021-08/msg04215.html
Signed-off-by: Longpeng(Mike) <longpeng2@huawei.com>
Message-Id: <20210827080003.2689-1-longpeng2@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_MAX_VCPU_ID is not specifying the highest allowed vcpu-id, but the
number of allowed vcpu-ids. This has already led to confusion, so
rename KVM_MAX_VCPU_ID to KVM_MAX_VCPU_IDS to make its semantics more
clear
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210913135745.13944-3-jgross@suse.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_make_vcpus_request_mask() already disables preemption so just like
kvm_make_all_cpus_request_except() it can be switched to using
pre-allocated per-cpu cpumasks. This allows for improvements for both
users of the function: in Hyper-V emulation code 'tlb_flush' can now be
dropped from 'struct kvm_vcpu_hv' and kvm_make_scan_ioapic_request_mask()
gets rid of dynamic allocation.
cpumask_available() checks in kvm_make_vcpu_request() and
kvm_kick_many_cpus() can now be dropped as they checks for an impossible
condition: kvm_init() makes sure per-cpu masks are allocated.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210903075141.403071-9-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allocating cpumask dynamically in zalloc_cpumask_var() is not ideal.
Allocation is somewhat slow and can (in theory and when CPUMASK_OFFSTACK)
fail. kvm_make_all_cpus_request_except() already disables preemption so
we can use pre-allocated per-cpu cpumasks instead.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210903075141.403071-8-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Iterating over set bits in 'vcpu_bitmap' should be faster than going
through all vCPUs, especially when just a few bits are set.
Drop kvm_make_vcpus_request_mask() call from kvm_make_all_cpus_request_except()
to avoid handling the special case when 'vcpu_bitmap' is NULL, move the
code to kvm_make_all_cpus_request_except() itself.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210903075141.403071-5-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use vma_pages function on vma object instead of explicit computation.
Fix the following coccicheck warning:
./virt/kvm/kvm_main.c:3526:29-35: WARNING: Consider using vma_pages
helper on vma
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Message-Id: <1632900526-119643-1-git-send-email-yang.lee@linux.alibaba.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There is no user of tlbs_dirty.
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210918005636.3675-4-jiangshanlai@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Check for a NULL cpumask_var_t when kicking multiple vCPUs via
cpumask_available(), which performs a !NULL check if and only if cpumasks
are configured to be allocated off-stack. This is a meaningless
optimization, e.g. avoids a TEST+Jcc and TEST+CMOV on x86, but more
importantly helps document that the NULL check is necessary even though
all callers pass in a local variable.
No functional change intended.
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210827092516.1027264-3-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix a benign data race reported by syzbot+KCSAN[*] by ensuring vcpu->cpu
is read exactly once, and by ensuring the vCPU is booted from guest mode
if kvm_arch_vcpu_should_kick() returns true. Fix a similar race in
kvm_make_vcpus_request_mask() by ensuring the vCPU is interrupted if
kvm_request_needs_ipi() returns true.
Reading vcpu->cpu before vcpu->mode (via kvm_arch_vcpu_should_kick() or
kvm_request_needs_ipi()) means the target vCPU could get migrated (change
vcpu->cpu) and enter !OUTSIDE_GUEST_MODE between reading vcpu->cpud and
reading vcpu->mode. If that happens, the kick/IPI will be sent to the
old pCPU, not the new pCPU that is now running the vCPU or reading SPTEs.
Although failing to kick the vCPU is not exactly ideal, practically
speaking it cannot cause a functional issue unless there is also a bug in
the caller, and any such bug would exist regardless of kvm_vcpu_kick()'s
behavior.
The purpose of sending an IPI is purely to get a vCPU into the host (or
out of reading SPTEs) so that the vCPU can recognize a change in state,
e.g. a KVM_REQ_* request. If vCPU's handling of the state change is
required for correctness, KVM must ensure either the vCPU sees the change
before entering the guest, or that the sender sees the vCPU as running in
guest mode. All architectures handle this by (a) sending the request
before calling kvm_vcpu_kick() and (b) checking for requests _after_
setting vcpu->mode.
x86's READING_SHADOW_PAGE_TABLES has similar requirements; KVM needs to
ensure it kicks and waits for vCPUs that started reading SPTEs _before_
MMU changes were finalized, but any vCPU that starts reading after MMU
changes were finalized will see the new state and can continue on
uninterrupted.
For uses of kvm_vcpu_kick() that are not paired with a KVM_REQ_*, e.g.
x86's kvm_arch_sync_dirty_log(), the order of the kick must not be relied
upon for functional correctness, e.g. in the dirty log case, userspace
cannot assume it has a 100% complete log if vCPUs are still running.
All that said, eliminate the benign race since the cost of doing so is an
"extra" atomic cmpxchg() in the case where the target vCPU is loaded by
the current pCPU or is not loaded at all. I.e. the kick will be skipped
due to kvm_vcpu_exiting_guest_mode() seeing a compatible vcpu->mode as
opposed to the kick being skipped because of the cpu checks.
Keep the "cpu != me" checks even though they appear useless/impossible at
first glance. x86 processes guest IPI writes in a fast path that runs in
IN_GUEST_MODE, i.e. can call kvm_vcpu_kick() from IN_GUEST_MODE. And
calling kvm_vm_bugged()->kvm_make_vcpus_request_mask() from IN_GUEST or
READING_SHADOW_PAGE_TABLES is perfectly reasonable.
Note, a race with the cpu_online() check in kvm_vcpu_kick() likely
persists, e.g. the vCPU could exit guest mode and get offlined between
the cpu_online() check and the sending of smp_send_reschedule(). But,
the online check appears to exist only to avoid a WARN in x86's
native_smp_send_reschedule() that fires if the target CPU is not online.
The reschedule WARN exists because CPU offlining takes the CPU out of the
scheduling pool, i.e. the WARN is intended to detect the case where the
kernel attempts to schedule a task on an offline CPU. The actual sending
of the IPI is a non-issue as at worst it will simpy be dropped on the
floor. In other words, KVM's usurping of the reschedule IPI could
theoretically trigger a WARN if the stars align, but there will be no
loss of functionality.
[*] https://syzkaller.appspot.com/bug?extid=cd4154e502f43f10808a
Cc: Venkatesh Srinivas <venkateshs@google.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Fixes: 97222cc831 ("KVM: Emulate local APIC in kernel")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210827092516.1027264-2-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
grow_halt_poll_ns() ignores values between 0 and
halt_poll_ns_grow_start (10000 by default). However,
when we shrink halt_poll_ns we may fall way below
halt_poll_ns_grow_start and endup with halt_poll_ns
values that don't make a lot of sense: like 1 or 9,
or 19.
VCPU1 trace (halt_poll_ns_shrink equals 2):
VCPU1 grow 10000
VCPU1 shrink 5000
VCPU1 shrink 2500
VCPU1 shrink 1250
VCPU1 shrink 625
VCPU1 shrink 312
VCPU1 shrink 156
VCPU1 shrink 78
VCPU1 shrink 39
VCPU1 shrink 19
VCPU1 shrink 9
VCPU1 shrink 4
Mirror what grow_halt_poll_ns() does and set halt_poll_ns
to 0 as soon as new shrink-ed halt_poll_ns value falls
below halt_poll_ns_grow_start.
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210902031100.252080-1-senozhatsky@chromium.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the unused function as reported by test bot.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210901230904.15164-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Page ownership tracking between host EL1 and EL2
- Rely on userspace page tables to create large stage-2 mappings
- Fix incompatibility between pKVM and kmemleak
- Fix the PMU reset state, and improve the performance of the virtual PMU
- Move over to the generic KVM entry code
- Address PSCI reset issues w.r.t. save/restore
- Preliminary rework for the upcoming pKVM fixed feature
- A bunch of MM cleanups
- a vGIC fix for timer spurious interrupts
- Various cleanups
-----BEGIN PGP SIGNATURE-----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=LuHM
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 5.15
- Page ownership tracking between host EL1 and EL2
- Rely on userspace page tables to create large stage-2 mappings
- Fix incompatibility between pKVM and kmemleak
- Fix the PMU reset state, and improve the performance of the virtual PMU
- Move over to the generic KVM entry code
- Address PSCI reset issues w.r.t. save/restore
- Preliminary rework for the upcoming pKVM fixed feature
- A bunch of MM cleanups
- a vGIC fix for timer spurious interrupts
- Various cleanups
Add a new stat that counts the number of times a remote TLB flush is
requested, regardless of whether it kicks vCPUs out of guest mode. This
allows us to look at how often flushes are initiated.
Unlike remote_tlb_flush, this one applies to ARM's instruction-set-based
TLB flush implementation, so apply it there too.
Original-by: David Matlack <dmatlack@google.com>
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Message-Id: <20210817002639.3856694-1-jingzhangos@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Don't export KVM's MMU notifier count helpers, under no circumstance
should any downstream module, including x86's vendor code, have a
legitimate reason to piggyback KVM's MMU notifier logic. E.g in the x86
case, only KVM's MMU should be elevating the notifier count, and that
code is always built into the core kvm.ko module.
Fixes: edb298c663 ("KVM: x86/mmu: bump mmu notifier count in kvm_zap_gfn_range")
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210902175951.1387989-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add three log histogram stats to record the distribution of time spent
on successful polling, failed polling and VCPU wait.
halt_poll_success_hist: Distribution of spent time for a successful poll.
halt_poll_fail_hist: Distribution of spent time for a failed poll.
halt_wait_hist: Distribution of time a VCPU has spent on waiting.
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Message-Id: <20210802165633.1866976-6-jingzhangos@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add simple stats halt_wait_ns to record the time a VCPU has spent on
waiting for all architectures (not just powerpc).
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Message-Id: <20210802165633.1866976-5-jingzhangos@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This together with previous patch, ensures that
kvm_zap_gfn_range doesn't race with page fault
running on another vcpu, and will make this page fault code
retry instead.
This is based on a patch suggested by Sean Christopherson:
https://lkml.org/lkml/2021/7/22/1025
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210810205251.424103-5-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow archs to create arch-specific nodes under kvm->debugfs_dentry directory
besides the stats fields. The new interface kvm_arch_create_vm_debugfs() is
defined but not yet used. It's called after kvm->debugfs_dentry is created, so
it can be referenced directly in kvm_arch_create_vm_debugfs(). Arch should
define their own versions when they want to create extra debugfs nodes.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210730220455.26054-2-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
These stores are copied and pasted from the "if" statements above.
They are dead and while they are not really a bug, they can be
confusing to anyone reading the code as well. Remove them.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The memslot for a given gfn is looked up multiple times during page
fault handling. Avoid binary searching for it multiple times by caching
the most recently used slot. There is an existing VM-wide last_used_slot
but that does not work well for cases where vCPUs are accessing memory
in different slots (see performance data below).
Another benefit of caching the most recently use slot (versus looking
up the slot once and passing around a pointer) is speeding up memslot
lookups *across* faults and during spte prefetching.
To measure the performance of this change I ran dirty_log_perf_test with
64 vCPUs and 64 memslots and measured "Populate memory time" and
"Iteration 2 dirty memory time". Tests were ran with eptad=N to force
dirty logging to use fast_page_fault so its performance could be
measured.
Config | Metric | Before | After
---------- | ----------------------------- | ------ | ------
tdp_mmu=Y | Populate memory time | 6.76s | 5.47s
tdp_mmu=Y | Iteration 2 dirty memory time | 2.83s | 0.31s
tdp_mmu=N | Populate memory time | 20.4s | 18.7s
tdp_mmu=N | Iteration 2 dirty memory time | 2.65s | 0.30s
The "Iteration 2 dirty memory time" results are especially compelling
because they are equivalent to running the same test with a single
memslot. In other words, fast_page_fault performance no longer scales
with the number of memslots.
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210804222844.1419481-4-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
lru_slot is used to keep track of the index of the most-recently used
memslot. The correct acronym would be "mru" but that is not a common
acronym. So call it last_used_slot which is a bit more obvious.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20210804222844.1419481-2-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
