Commit Graph

7955 Commits

Author SHA1 Message Date
Jiri Slaby
a7e50de460 tty/vt: consolemap: change refcount only if needed in con_do_clear_unimap()
con_do_clear_unimap() currently decreases and increases refcount of old
dictionary in a back and forth fashion. This makes the code really hard
to follow. Decrease the refcount only if everything went well and we
really allocated a new one and decoupled from the old dictionary.

I sincerelly hope I did not make a mistake in this (ill) logic.

Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220607104946.18710-33-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10 13:37:03 +02:00
Jiri Slaby
d8d0d1758c tty/vt: consolemap: remove superfluous whitespace
There are still some remaining tabs/spaces at EOLs or spaces before
tabs. Remove them all now.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220607104946.18710-32-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10 13:37:03 +02:00
Jiri Slaby
9ec9b79a2b tty/vt: consolemap: make conv_uni_to_pc() more readable
1) Fetch *conp->vc_uni_pagedir_loc first and do the NULL check on the local
   variable.
2) Decouple the large "if" into few smaller "if"s.
3) Remove a \n from the definition line.

This makes the code more readable.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220607104946.18710-31-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10 13:37:03 +02:00
Jiri Slaby
1a086f5d63 tty/vt: consolemap: saner variable names in con_set_default_unimap()
The function uses too vague variable names like i, j, k for iterators, p,
q, p1, p2 for pointers etc.

Rename all these, so that it is clear what is going on:
- dict: for dictionaries.
- d, r, g: for dir, row, glyph iterators -- these are unsigned now.
- dir, row: for directory and row pointers.
- glyph: for the glyph.
- and so on...

This is a lot of shuffling, but the result pays off, IMO.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220607104946.18710-30-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10 13:37:03 +02:00
Jiri Slaby
ff4606acb4 tty/vt: consolemap: saner variable names in con_set_unimap()
The function uses too vague variable names like i, j, k for iterators, p,
q, p1, p2 for pointers etc.

Rename all these, so that it is clear what is going on:
- dict: for dictionaries.
- d, r, g: for dir, row, glyph iterators -- these are unsigned now.
- dir, row: for directory and row pointers.
- glyph: for the glyph.
- and so on...

This is a lot of shuffling, but the result pays off, IMO.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220607104946.18710-29-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10 13:37:03 +02:00
Jiri Slaby
5a79458c56 tty/vt: consolemap: saner variable names in con_get_unimap()
The function uses too vague variable names like i, j, k for iterators, p,
q, p1, p2 for pointers etc.

Rename all these, so that it is clear what is going on:
- dict: for dictionaries.
- d, r, g: for dir, row, glyph iterators -- these are unsigned now.
- dir, row: for directory and row pointers.
- glyph: for the glyph.
- and so on...

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220607104946.18710-28-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10 13:37:03 +02:00
Jiri Slaby
3315f1aa85 tty/vt: consolemap: saner variable names in con_copy_unimap()
The function uses too vague variable names like i, j, k for iterators, p,
q, p1, p2 for pointers etc.

Rename all these, so that it is clear what is going on:
- dict: for dictionaries.
- d, r, g: for dir, row, glyph iterators -- these are unsigned now.
- dir, row: for directory and row pointers.
- glyph: for the glyph.
- and so on...

This is a lot of shuffling, but the result pays off, IMO.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220607104946.18710-27-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10 13:37:03 +02:00
Jiri Slaby
447e9a7c66 tty/vt: consolemap: saner variable names in con_release_unimap()
The function uses too vague variable names like i, j, k for iterators, p,
q, p1, p2 for pointers etc.

Rename all these, so that it is clear what is going on:
- dict: for dictionaries.
- d, r, g: for dir, row, glyph iterators -- these are unsigned now.
- dir, row: for directory and row pointers.
- glyph: for the glyph.
- and so on...

This is a lot of shuffling, but the result pays off, IMO.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220607104946.18710-26-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10 13:37:02 +02:00
Jiri Slaby
cded789c68 tty/vt: consolemap: saner variable names in con_unshare_unimap()
The function uses too vague variable names like i, j, k for iterators, p,
q, p1, p2 for pointers etc.

Rename all these, so that it is clear what is going on:
- dict: for dictionaries.
- d, r, g: for dir, row, glyph iterators -- these are unsigned now.
- dir, row: for directory and row pointers.
- glyph: for the glyph.
- and so on...

This is a lot of shuffling, but the result pays off, IMO.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220607104946.18710-25-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10 13:37:02 +02:00
Jiri Slaby
01ddc0dabd tty/vt: consolemap: saner variable names in con_do_clear_unimap()
The function uses too vague variable names like i, j, k for iterators, p,
q, p1, p2 for pointers etc.

Rename all these, so that it is clear what is going on:
- dict: for dictionaries.
- d, r, g: for dir, row, glyph iterators -- these are unsigned now.
- dir, row: for directory and row pointers.
- glyph: for the glyph.
- and so on...

This is a lot of shuffling, but the result pays off, IMO.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220607104946.18710-24-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10 13:37:02 +02:00
Jiri Slaby
c3fd9f7121 tty/vt: consolemap: saner variable names in con_unify_unimap()
The function uses too vague variable names like i, j, k for iterators, p,
q, p1, p2 for pointers etc.

Rename all these, so that it is clear what is going on:
- dict: for dictionaries.
- d, r, g: for dir, row, glyph iterators -- these are unsigned now.
- dir, row: for directory and row pointers.
- glyph: for the glyph.
- and so on...

This is a lot of shuffling, but the result pays off, IMO.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220607104946.18710-23-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10 13:37:02 +02:00
Jiri Slaby
d4a2245b8b tty/vt: consolemap: saner variable names in con_insert_unipair()
The function uses too vague variable names like i, j, k for iterators, p,
q, p1, p2 for pointers etc.

Rename all these, so that it is clear what is going on:
- dict: for dictionaries.
- d, r, g: for dir, row, glyph iterators -- these are unsigned now.
- dir, row: for directory and row pointers.
- glyph: for the glyph.
- and so on...

This is a lot of shuffling, but the result pays off, IMO.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220607104946.18710-22-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10 13:37:02 +02:00
Jiri Slaby
61fe4a6bb1 tty/vt: consolemap: saner variable names in conv_uni_to_pc()
The function uses too vague variable names like i, j, k for iterators, p,
q, p1, p2 for pointers etc.

Rename all these, so that it is clear what is going on:
- dict: for dictionaries.
- d, r, g: for dir, row, glyph iterators -- these are unsigned now.
- dir, row: for directory and row pointers.
- glyph: for the glyph.
- and so on...

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220607104946.18710-21-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10 13:37:02 +02:00
Jiri Slaby
50c92a1b2d tty/vt: consolemap: saner variable names in set_inverse_trans_unicode()
The function uses too vague variable names like i, j, k for iterators, p,
q, p1, p2 for pointers etc.

Rename all these, so that it is clear what is going on:
- dict: for dictionaries.
- d, r, g: for dir, row, glyph iterators -- these are unsigned now.
- dir, row: for directory and row pointers.
- glyph: for the glyph.
- and so on...

This is a lot of shuffling, but the result pays off, IMO.

Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220607104946.18710-20-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10 13:37:02 +02:00
Jiri Slaby
dca1419173 tty/vt: consolemap: extract dict unsharing to con_unshare_unimap()
The code in con_set_unimap() is too nested. Extract its obvious part
into a separate function and name it after what the code does:
con_unshare_unimap().

Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220607104946.18710-19-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10 13:37:02 +02:00
Jiri Slaby
f052f62c23 tty/vt: consolemap: remove glyph < 0 check from set_inverse_trans_unicode()
glyph is now an int casted from u16. It can never be negative. So remove
the check and type glyph as u16 properly in set_inverse_trans_unicode().

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220607104946.18710-18-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10 13:37:02 +02:00
Jiri Slaby
5a904a936b tty/vt: consolemap: introduce enum translation_map and use it
Again, instead of magic constants in the code, declare an enum and be a
little bit more explicit. Both in the translations definition and in the
loops etc.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220607104946.18710-17-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10 13:37:02 +02:00
Jiri Slaby
949fafcd7f tty/vt: consolemap: check put_user() in con_get_unimap()
Only the return value of copy_to_user() is checked in con_get_unimap().
Do the same for put_user() of the count too.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220607104946.18710-16-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10 13:37:02 +02:00
Jiri Slaby
cb47d81f0f tty/vt: consolemap: make p1 increment less confusing in con_get_unimap()
p2 is already incremented like this few lines below, so do the same for
p1. This makes the code easier to follow.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220607104946.18710-15-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10 13:37:02 +02:00
Jiri Slaby
6364d39136 tty/vt: consolemap: make con_get_unimap() more readable
The indentation is completely broken in con_get_unimap(). Reorder the
code using "if (!cond) continue;"s so that the code makes sense. Switch
also the "p" assignment and add a short path using goto. This makes the
code readable again.

Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220607104946.18710-14-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10 13:37:02 +02:00
Jiri Slaby
6e4e8d7466 tty/vt: consolemap: make con_set_unimap() more readable
The indentation was completely broken in con_set_unimap(). Reorder the
code using 'if (!cond) continue;'s so that the code makes sense. Not
that it is perfect now, but it can be followed at least. More cleanup to
come. And remove all those useless whitespaces at the EOLs too.

Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220607104946.18710-13-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10 13:37:01 +02:00
Jiri Slaby
acf90b4d52 tty/vt: consolemap: use sizeof(*pointer) instead of sizeof(type)
It is preferred to use sizeof(*pointer) instead of sizeof(type). First,
the type of the variable can change and one needs not change the former
(unlike the latter). Second, the latter is error-prone due to (u16),
(u16 *), and (u16 **) mixture here.

Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220607104946.18710-12-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10 13:37:01 +02:00
Jiri Slaby
32bd78fc49 tty/vt: consolemap: zero uni_pgdir using kcalloc()
The newly allocated p->uni_pgdir[n] is initialized to NULLs right after
a kmalloc_array() allocation. Combine these two using kcalloc().

Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220607104946.18710-11-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10 13:37:01 +02:00
Jiri Slaby
9254365443 tty/vt: consolemap: introduce UNI_*() macros
The code currently does shift, OR, and AND logic directly in the code.
It is not much obvious what happens there. Therefore define four macros
for that purpose and use them in the code. We use GENMASK() so that it
is clear which bits serve what purpose:
- UNI_GLYPH: bits  0.. 5
- UNI_ROW:   bits  6..10
- UNI_DIR:   bits 11..31

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220607104946.18710-10-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10 13:37:01 +02:00
Jiri Slaby
ad8a2142ba tty/vt: consolemap: use | for binary addition
Unicode letters are composed as a bit shifts and sums of three values.
Use "|" and not "+" for these bit operations. The former is indeed more
appropriate.

Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220607104946.18710-9-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10 13:37:01 +02:00
Jiri Slaby
e16cb6fe31 tty/vt: consolemap: one line = one statement
Some lines combine more statements on one line. This makes the code hard
to follow. Do it properly in the "one line = one statement" fashion.

Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220607104946.18710-8-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10 13:37:01 +02:00
Jiri Slaby
d9ebb906a4 tty/vt: consolemap: make parameters of inverse_translate() saner
- int use_unicode -> bool: it's used as bool at some places already, so
  make it explicit.
- int glyph -> u16: every caller passes a u16 in. So make it explicit
  too. And remove a negative check from inverse_translate() as it never
  could be negative.

Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220607104946.18710-7-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10 13:37:01 +02:00
Jiri Slaby
2097dc2273 tty/vt: consolemap: decrypt inverse_translate()
Fix invalid indentation and demystify the code by removing superfluous
"else"s. The "else"s are unneeded as they always follow an "if"-true
branch containing a "return". The code is now way more readable.

Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220607104946.18710-4-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10 13:37:01 +02:00
Jiri Slaby
db8f597a47 tty/vt: consolemap: define UNI_* macros for constants
The code uses constants for sizes of dictionary substructures on many
places. Define 3 macros and use them in the code, so that loop bounds,
local variables and the dictionary always match. (And the loop bounds
are obvious now too.)

Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220607104946.18710-3-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10 13:37:01 +02:00
Jiri Slaby
4173f018aa tty/vt: consolemap: rename and document struct uni_pagedir
struct uni_pagedir contains 32 unicode page directories, so the name of
the structure is a bit misleading. Rename the structure to uni_pagedict,
so it looks like this:
struct uni_pagedict
  -> 32 page dirs
     -> 32 rows
       -> 64 glyphs

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220607104946.18710-2-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10 13:37:01 +02:00
Jiri Slaby
17945d317a tty/vt: consolemap: use ARRAY_SIZE()
The code uses constants as bounds in loops. Use ARRAY_SIZE() with
appropriate parameters instead. This makes the loop bounds obvious.

Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220607104946.18710-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10 13:37:00 +02:00
Jiri Slaby
5c4d7b049d tty/vt: Makefile, add --unicode for loadkeys invocation
For a long time, we generate unicode tables using loadkeys. So fix
Makefile to use that flag too.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220602083128.22540-2-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10 13:34:18 +02:00
Jiri Slaby
0d49ee83a4 tty/vt: defkeymap.c_shipped, little unification with loadkeys
loadkeys 2.4.0 currently:
* notes the use of --unicode to the output, and
* uses "unsigned short" for key_maps instead of "ushort".

So make our shipped file consistent with the generated output in this
regard.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220602083128.22540-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10 13:34:17 +02:00
Jiri Slaby
7fd6c24bae serial: pmac_zilog: remove unused header
After commit a5ddc498e7 (serial: pmac_zilog: remove unfinished DBDMA
support), the header is unused and can be removed. So do so.

Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Suggested-by: "Ilpo Järvinen" <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220602083120.22519-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10 13:33:57 +02:00
Yang Yingliang
6f3cdf2bf1 serial: pic32: fix missing clk_disable_unprepare() on error in pic32_uart_startup()
Fix the missing clk_disable_unprepare() before return
from pic32_uart_startup() in the error handling case.

Fixes: 157b939470 ("serial: pic32_uart: Add PIC32 UART driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220525021204.2407631-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10 13:33:28 +02:00
Julia Lawall
d93e612d13 serial: tegra: fix typos in comments
Spelling mistakes (triple letters) in comments.
Detected with the help of Coccinelle.

Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/20220521111145.81697-23-Julia.Lawall@inria.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10 13:32:54 +02:00
Julia Lawall
da1bb4ed23 tty: fix typos in comments
Spelling mistakes (triple letters) in comments.
Detected with the help of Coccinelle.

Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Link: https://lore.kernel.org/r/20220521111145.81697-95-Julia.Lawall@inria.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10 13:32:52 +02:00
Vincent Whitchurch
499e13aac6 tty: goldfish: Fix free_irq() on remove
Pass the correct dev_id to free_irq() to fix this splat when the driver
is unbound:

 WARNING: CPU: 0 PID: 30 at kernel/irq/manage.c:1895 free_irq
 Trying to free already-free IRQ 65
 Call Trace:
  warn_slowpath_fmt
  free_irq
  goldfish_tty_remove
  platform_remove
  device_remove
  device_release_driver_internal
  device_driver_detach
  unbind_store
  drv_attr_store
  ...

Fixes: 465893e188 ("tty: goldfish: support platform_device with id -1")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Link: https://lore.kernel.org/r/20220609141704.1080024-1-vincent.whitchurch@axis.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10 13:31:31 +02:00
Vijaya Krishna Nivarthi
654a8d6c93 tty: serial: qcom-geni-serial: Implement start_rx callback
In suspend sequence stop_rx will be performed only if implementation for
start_rx callback is present.

Set qcom_geni_serial_start_rx as callback for start_rx so that stop_rx is
performed.

Fixes: c9d2325cdb ("serial: core: Do stop_rx in suspend path for console if console_suspend is disabled")
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com>
Link: https://lore.kernel.org/r/1654627965-1461-3-git-send-email-quic_vnivarth@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10 13:30:41 +02:00
Vijaya Krishna Nivarthi
cfab87c2c2 serial: core: Introduce callback for start_rx and do stop_rx in suspend only if this callback implementation is present.
In suspend sequence there is a need to perform stop_rx during suspend
sequence to prevent any asynchronous data over rx line. However this
can cause problem to drivers which dont do re-start_rx during set_termios.

Add new callback start_rx and perform stop_rx only when implementation of
start_rx is present. Also add call to start_rx in resume sequence so that
drivers who come across this problem can make use of this framework.

Fixes: c9d2325cdb ("serial: core: Do stop_rx in suspend path for console if console_suspend is disabled")
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com>
Link: https://lore.kernel.org/r/1654627965-1461-2-git-send-email-quic_vnivarth@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10 13:30:41 +02:00
Tony Lindgren
e74024b2ec tty: n_gsm: Debug output allocation must use GFP_ATOMIC
Dan Carpenter <dan.carpenter@oracle.com> reported the following Smatch
warning:

drivers/tty/n_gsm.c:720 gsm_data_kick()
warn: sleeping in atomic context

This is because gsm_control_message() is holding a spin lock so
gsm_hex_dump_bytes() needs to use GFP_ATOMIC instead of GFP_KERNEL.

Fixes: 925ea0fa52 ("tty: n_gsm: Fix packet data hex dump output")
Cc: stable <stable@kernel.org>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20220523155052.57129-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-06-10 13:30:11 +02:00
Linus Torvalds
4ccbe91de9 xen: branch for v5.19-rc1b
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYprzPAAKCRCAXGG7T9hj
 vuTzAQC4GiDXcD/cfLVcEqdyw1diCWZjuOfuznUqy5ZUBAZjvAD/draFHTeO96+k
 qyZyzFggPIziaAOIUZ2DkJ/NqSAmbA8=
 =dl1E
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-5.19-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Pull more xen updates from Juergen Gross:
 "Two cleanup patches for Xen related code and (more important) an
  update of MAINTAINERS for Xen, as Boris Ostrovsky decided to step
  down"

* tag 'for-linus-5.19-rc1b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen: replace xen_remap() with memremap()
  MAINTAINERS: Update Xen maintainership
  xen: switch gnttab_end_foreign_access() to take a struct page pointer
2022-06-04 13:42:53 -07:00
Linus Torvalds
67850b7bdc While looking at the ptrace problems with PREEMPT_RT and the problems
of Peter Zijlstra was encountering with ptrace in his freezer rewrite
 I identified some cleanups to ptrace_stop that make sense on their own
 and move make resolving the other problems much simpler.
 
 The biggest issue is the habbit of the ptrace code to change task->__state
 from the tracer to suppress TASK_WAKEKILL from waking up the tracee.  No
 other code in the kernel does that and it is straight forward to update
 signal_wake_up and friends to make that unnecessary.
 
 Peter's task freezer sets frozen tasks to a new state TASK_FROZEN and
 then it stores them by calling "wake_up_state(t, TASK_FROZEN)" relying
 on the fact that all stopped states except the special stop states can
 tolerate spurious wake up and recover their state.
 
 The state of stopped and traced tasked is changed to be stored in
 task->jobctl as well as in task->__state.  This makes it possible for
 the freezer to recover tasks in these special states, as well as
 serving as a general cleanup.  With a little more work in that
 direction I believe TASK_STOPPED can learn to tolerate spurious wake
 ups and become an ordinary stop state.
 
 The TASK_TRACED state has to remain a special state as the registers for
 a process are only reliably available when the process is stopped in
 the scheduler.  Fundamentally ptrace needs acess to the saved
 register values of a task.
 
 There are bunch of semi-random ptrace related cleanups that were found
 while looking at these issues.
 
 One cleanup that deserves to be called out is from commit 57b6de08b5
 ("ptrace: Admit ptrace_stop can generate spuriuos SIGTRAPs").  This
 makes a change that is technically user space visible, in the handling
 of what happens to a tracee when a tracer dies unexpectedly.
 According to our testing and our understanding of userspace nothing
 cares that spurious SIGTRAPs can be generated in that case.
 
 The entire discussion can be found at:
   https://lkml.kernel.org/r/87a6bv6dl6.fsf_-_@email.froward.int.ebiederm.org
 
 Eric W. Biederman (11):
       signal: Rename send_signal send_signal_locked
       signal: Replace __group_send_sig_info with send_signal_locked
       ptrace/um: Replace PT_DTRACE with TIF_SINGLESTEP
       ptrace/xtensa: Replace PT_SINGLESTEP with TIF_SINGLESTEP
       ptrace: Remove arch_ptrace_attach
       signal: Use lockdep_assert_held instead of assert_spin_locked
       ptrace: Reimplement PTRACE_KILL by always sending SIGKILL
       ptrace: Document that wait_task_inactive can't fail
       ptrace: Admit ptrace_stop can generate spuriuos SIGTRAPs
       ptrace: Don't change __state
       ptrace: Always take siglock in ptrace_resume
 
 Peter Zijlstra (1):
       sched,signal,ptrace: Rework TASK_TRACED, TASK_STOPPED state
 
  arch/ia64/include/asm/ptrace.h    |   4 --
  arch/ia64/kernel/ptrace.c         |  57 ----------------
  arch/um/include/asm/thread_info.h |   2 +
  arch/um/kernel/exec.c             |   2 +-
  arch/um/kernel/process.c          |   2 +-
  arch/um/kernel/ptrace.c           |   8 +--
  arch/um/kernel/signal.c           |   4 +-
  arch/x86/kernel/step.c            |   3 +-
  arch/xtensa/kernel/ptrace.c       |   4 +-
  arch/xtensa/kernel/signal.c       |   4 +-
  drivers/tty/tty_jobctrl.c         |   4 +-
  include/linux/ptrace.h            |   7 --
  include/linux/sched.h             |  10 ++-
  include/linux/sched/jobctl.h      |   8 +++
  include/linux/sched/signal.h      |  20 ++++--
  include/linux/signal.h            |   3 +-
  kernel/ptrace.c                   |  87 ++++++++---------------
  kernel/sched/core.c               |   5 +-
  kernel/signal.c                   | 140 +++++++++++++++++---------------------
  kernel/time/posix-cpu-timers.c    |   6 +-
  20 files changed, 140 insertions(+), 240 deletions(-)
 
 Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEgjlraLDcwBA2B+6cC/v6Eiajj0AFAmKaXaYACgkQC/v6Eiaj
 j0CgoA/+JncSQ6PY2D5Jh1apvHzmnRsFXzr3DRvtv/CVx4oIebOXRQFyVDeD5tRn
 TmMgB29HpBlHRDLojlmlZRGAld1HR/aPEW9j8W1D3Sy/ZFO5L8lQitv9aDHO9Ntw
 4lZvlhS1M0KhATudVVBqSPixiG6CnV5SsGmixqdOyg7xcXSY6G1l2nB7Zk9I3Tat
 ZlmhuZ6R5Z5qsm4MEq0vUSrnsHiGxYrpk6uQOaVz8Wkv8ZFmbutt6XgxF0tsyZNn
 mHSmWSiZzIgBjTlaibEmxi8urYJTPj3vGBeJQVYHblFwLFi6+Oy7bDxQbWjQvaZh
 DsgWPScfBF4Jm0+8hhCiSYpvPp8XnZuklb4LNCeok/VFr+KfSmpJTIhn00kagQ1u
 vxQDqLws8YLW4qsfGydfx9uUIFCbQE/V2VDYk5J3Re3gkUNDOOR1A56hPniKv6VB
 2aqGO2Fl0RdBbUa3JF+XI5Pwq5y1WrqR93EUvj+5+u5W9rZL/8WLBHBMEz6gbmfD
 DhwFE0y8TG2WRlWJVEDRId+5zo3di/YvasH0vJZ5HbrxhS2RE/yIGAd+kKGx/lZO
 qWDJC7IHvFJ7Mw5KugacyF0SHeNdloyBM7KZW6HeXmgKn9IMJBpmwib92uUkRZJx
 D8j/bHHqD/zsgQ39nO+c4M0MmhO/DsPLG/dnGKrRCu7v1tmEnkY=
 =ZUuO
 -----END PGP SIGNATURE-----

Merge tag 'ptrace_stop-cleanup-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

Pull ptrace_stop cleanups from Eric Biederman:
 "While looking at the ptrace problems with PREEMPT_RT and the problems
  Peter Zijlstra was encountering with ptrace in his freezer rewrite I
  identified some cleanups to ptrace_stop that make sense on their own
  and move make resolving the other problems much simpler.

  The biggest issue is the habit of the ptrace code to change
  task->__state from the tracer to suppress TASK_WAKEKILL from waking up
  the tracee. No other code in the kernel does that and it is straight
  forward to update signal_wake_up and friends to make that unnecessary.

  Peter's task freezer sets frozen tasks to a new state TASK_FROZEN and
  then it stores them by calling "wake_up_state(t, TASK_FROZEN)" relying
  on the fact that all stopped states except the special stop states can
  tolerate spurious wake up and recover their state.

  The state of stopped and traced tasked is changed to be stored in
  task->jobctl as well as in task->__state. This makes it possible for
  the freezer to recover tasks in these special states, as well as
  serving as a general cleanup. With a little more work in that
  direction I believe TASK_STOPPED can learn to tolerate spurious wake
  ups and become an ordinary stop state.

  The TASK_TRACED state has to remain a special state as the registers
  for a process are only reliably available when the process is stopped
  in the scheduler. Fundamentally ptrace needs acess to the saved
  register values of a task.

  There are bunch of semi-random ptrace related cleanups that were found
  while looking at these issues.

  One cleanup that deserves to be called out is from commit 57b6de08b5
  ("ptrace: Admit ptrace_stop can generate spuriuos SIGTRAPs"). This
  makes a change that is technically user space visible, in the handling
  of what happens to a tracee when a tracer dies unexpectedly. According
  to our testing and our understanding of userspace nothing cares that
  spurious SIGTRAPs can be generated in that case"

* tag 'ptrace_stop-cleanup-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  sched,signal,ptrace: Rework TASK_TRACED, TASK_STOPPED state
  ptrace: Always take siglock in ptrace_resume
  ptrace: Don't change __state
  ptrace: Admit ptrace_stop can generate spuriuos SIGTRAPs
  ptrace: Document that wait_task_inactive can't fail
  ptrace: Reimplement PTRACE_KILL by always sending SIGKILL
  signal: Use lockdep_assert_held instead of assert_spin_locked
  ptrace: Remove arch_ptrace_attach
  ptrace/xtensa: Replace PT_SINGLESTEP with TIF_SINGLESTEP
  ptrace/um: Replace PT_DTRACE with TIF_SINGLESTEP
  signal: Replace __group_send_sig_info with send_signal_locked
  signal: Rename send_signal send_signal_locked
2022-06-03 16:13:25 -07:00
Linus Torvalds
932c2989b5 TTY / Serial driver changes for 5.19-rc1
Here is the big set of tty and serial driver updates for 5.19-rc1.
 
 Lots of tiny cleanups in here, the major stuff is:
 	- termbit cleanups and unification by Ilpo.  A much needed
 	  change that goes a long way to making things simpler for all
 	  of the different arches
 	- tty documentation cleanups and movements to their own place in
 	  the documentation tree
 	- old tty driver cleanups and fixes from Jiri to bring some
 	  existing drivers into the modern world
 	- RS485 cleanups and unifications to make it easier for
 	  individual drivers to support this mode instead of having to
 	  duplicate logic in each driver
 	- Lots of 8250 driver updates and additions
 	- new device id additions
 	- n_gsm continued fixes and cleanups
 	- other minor serial driver updates and cleanups
 
 All of these have been in linux-next for weeks with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYpndTg8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ykFegCgizjLDyOepr72zMDWWdp0bBTekz8AoMWODfJY
 vB8/kzu329DImJMFB8ET
 =rmv0
 -----END PGP SIGNATURE-----

Merge tag 'tty-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty and serial driver updates from Greg KH:
 "Here is the big set of tty and serial driver updates for 5.19-rc1.

  Lots of tiny cleanups in here, the major stuff is:

   - termbit cleanups and unification by Ilpo. A much needed change that
     goes a long way to making things simpler for all of the different
     arches

   - tty documentation cleanups and movements to their own place in the
     documentation tree

   - old tty driver cleanups and fixes from Jiri to bring some existing
     drivers into the modern world

   - RS485 cleanups and unifications to make it easier for individual
     drivers to support this mode instead of having to duplicate logic
     in each driver

   - Lots of 8250 driver updates and additions

   - new device id additions

   - n_gsm continued fixes and cleanups

   - other minor serial driver updates and cleanups

  All of these have been in linux-next for weeks with no reported issues"

* tag 'tty-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (166 commits)
  tty: Rework receive flow control char logic
  pcmcia: synclink_cs: Don't allow CS5-6
  serial: stm32-usart: Correct CSIZE, bits, and parity
  serial: st-asc: Sanitize CSIZE and correct PARENB for CS7
  serial: sifive: Sanitize CSIZE and c_iflag
  serial: sh-sci: Don't allow CS5-6
  serial: txx9: Don't allow CS5-6
  serial: rda-uart: Don't allow CS5-6
  serial: digicolor-usart: Don't allow CS5-6
  serial: uartlite: Fix BRKINT clearing
  serial: cpm_uart: Fix build error without CONFIG_SERIAL_CPM_CONSOLE
  serial: core: Do stop_rx in suspend path for console if console_suspend is disabled
  tty: serial: qcom-geni-serial: Remove uart frequency table. Instead, find suitable frequency with call to clk_round_rate.
  dt-bindings: serial: renesas,em-uart: Add RZ/V2M clock to access the registers
  serial: 8250_fintek: Check SER_RS485_RTS_* only with RS485
  Revert "serial: 8250_mtk: Make sure to select the right FEATURE_SEL"
  serial: msm_serial: disable interrupts in __msm_console_write()
  serial: meson: acquire port->lock in startup()
  serial: 8250_dw: Use dev_err_probe()
  serial: 8250_dw: Use devm_add_action_or_reset()
  ...
2022-06-03 11:08:40 -07:00
Juergen Gross
41925b105e xen: replace xen_remap() with memremap()
xen_remap() is used to establish mappings for frames not under direct
control of the kernel: for Xenstore and console ring pages, and for
grant pages of non-PV guests.

Today xen_remap() is defined to use ioremap() on x86 (doing uncached
mappings), and ioremap_cache() on Arm (doing cached mappings).

Uncached mappings for those use cases are bad for performance, so they
should be avoided if possible. As all use cases of xen_remap() don't
require uncached mappings (the mapped area is always physical RAM),
a mapping using the standard WB cache mode is fine.

As sparse is flagging some of the xen_remap() use cases to be not
appropriate for iomem(), as the result is not annotated with the
__iomem modifier, eliminate xen_remap() completely and replace all
use cases with memremap() specifying the MEMREMAP_WB caching mode.

xen_unmap() can be replaced with memunmap().

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/20220530082634.6339-1-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
2022-06-01 07:24:17 +02:00
Linus Torvalds
6f664045c8 Not a lot of material this cycle. Many singleton patches against various
subsystems.   Most notably some maintenance work in ocfs2 and initramfs.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCYo/6xQAKCRDdBJ7gKXxA
 jkD9AQCPczLBbRWpe1edL+5VHvel9ePoHQmvbHQnufdTh9rB5QEAu0Uilxz4q9cx
 xSZypNhj2n9f8FCYca/ZrZneBsTnAA8=
 =AJEO
 -----END PGP SIGNATURE-----

Merge tag 'mm-nonmm-stable-2022-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc updates from Andrew Morton:
 "The non-MM patch queue for this merge window.

  Not a lot of material this cycle. Many singleton patches against
  various subsystems. Most notably some maintenance work in ocfs2
  and initramfs"

* tag 'mm-nonmm-stable-2022-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (65 commits)
  kcov: update pos before writing pc in trace function
  ocfs2: dlmfs: fix error handling of user_dlm_destroy_lock
  ocfs2: dlmfs: don't clear USER_LOCK_ATTACHED when destroying lock
  fs/ntfs: remove redundant variable idx
  fat: remove time truncations in vfat_create/vfat_mkdir
  fat: report creation time in statx
  fat: ignore ctime updates, and keep ctime identical to mtime in memory
  fat: split fat_truncate_time() into separate functions
  MAINTAINERS: add Muchun as a memcg reviewer
  proc/sysctl: make protected_* world readable
  ia64: mca: drop redundant spinlock initialization
  tty: fix deadlock caused by calling printk() under tty_port->lock
  relay: remove redundant assignment to pointer buf
  fs/ntfs3: validate BOOT sectors_per_clusters
  lib/string_helpers: fix not adding strarray to device's resource list
  kernel/crash_core.c: remove redundant check of ck_cmdline
  ELF, uapi: fixup ELF_ST_TYPE definition
  ipc/mqueue: use get_tree_nodev() in mqueue_get_tree()
  ipc: update semtimedop() to use hrtimer
  ipc/sem: remove redundant assignments
  ...
2022-05-27 11:22:03 -07:00
Linus Torvalds
16477cdfef asm-generic changes for 5.19
The asm-generic tree contains three separate changes for linux-5.19:
 
 - The h8300 architecture is retired after it has been effectively
   unmaintained for a number of years. This is the last architecture we
   supported that has no MMU implementation, but there are still a few
   architectures (arm, m68k, riscv, sh and xtensa) that support CPUs with
   and without an MMU.
 
 - A series to add a generic ticket spinlock that can be shared by most
   architectures with a working cmpxchg or ll/sc type atomic, including
   the conversion of riscv, csky and openrisc. This series is also a
   prerequisite for the loongarch64 architecture port that will come as
   a separate pull request.
 
 - A cleanup of some exported uapi header files to ensure they can be
   included from user space without relying on other kernel headers.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmKPlXoACgkQmmx57+YA
 GNkxrRAAnuSgOUo9JC5C4Gm2Q9yhEUHU1QIYeVO0jlan5CkF18bo1Loptq4MdQtO
 /0pXJPH8rFhDSJQLetO4AAjEMDfJGR5ibmf7SasO03HjqC9++fIeN047MbnkHAwY
 hFqIkgqn4l+g1RMWK5WUSDJ3XQ7p5/yWzpg/CuxJ+D0w9by/LWI5A+2NKGXOS3GF
 yi7cWvIKC1l+PmrH3BFA+JYVTvFzlr9P6x5pSEBi6HmjGQR+Xn3s0bnIf6DGRZ+B
 Q6v03kMxtcqI9e9C0r0r7ZGbdMuRTYbGrksa4EfK0yJM9P0HchhTtT9zawAK7Ddv
 VMM4B+9r60UEM++hOLS6XrLJdn+Fv+OJDnhONb5c+Mndd8cwV1JbOlVbUlGkn92e
 WSdUCW6m0TBzDs9Ae1++1kUl1LodlcmSzxlb0ueAhU01QacCPlneyIEKUhcrCl5w
 ITVw4YVa/BVCh+HvTEdhhak/Qb/nWiojMY+UIH5smiwj6FSFdwEmmgCgHAKprQaA
 STMxRnccFknGW9CZheoMATYsPIHQKPlm9lbiulSoMLDHxGwshU/6vKD4HDoZU51d
 HPmUZeKVPahXCUXB4iFI3qD4Ltxaru9VbgfUiY18VB2oc6Mk+0oeh6luqwsrgBdz
 P2sQ2riZKhN5Frm3DCh7IbJqoqKHlLMWh0itpNllgP5SDmDJjng=
 =ri2Q
 -----END PGP SIGNATURE-----

Merge tag 'asm-generic-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull asm-generic updates from Arnd Bergmann:
 "The asm-generic tree contains three separate changes for linux-5.19:

   - The h8300 architecture is retired after it has been effectively
     unmaintained for a number of years. This is the last architecture
     we supported that has no MMU implementation, but there are still a
     few architectures (arm, m68k, riscv, sh and xtensa) that support
     CPUs with and without an MMU.

   - A series to add a generic ticket spinlock that can be shared by
     most architectures with a working cmpxchg or ll/sc type atomic,
     including the conversion of riscv, csky and openrisc. This series
     is also a prerequisite for the loongarch64 architecture port that
     will come as a separate pull request.

   - A cleanup of some exported uapi header files to ensure they can be
     included from user space without relying on other kernel headers"

* tag 'asm-generic-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  h8300: remove stale bindings and symlink
  sparc: add asm/stat.h to UAPI compile-test coverage
  powerpc: add asm/stat.h to UAPI compile-test coverage
  mips: add asm/stat.h to UAPI compile-test coverage
  riscv: add linux/bpf_perf_event.h to UAPI compile-test coverage
  kbuild: prevent exported headers from including <stdlib.h>, <stdbool.h>
  agpgart.h: do not include <stdlib.h> from exported header
  csky: Move to generic ticket-spinlock
  RISC-V: Move to queued RW locks
  RISC-V: Move to generic spinlocks
  openrisc: Move to ticket-spinlock
  asm-generic: qrwlock: Document the spinlock fairness requirements
  asm-generic: qspinlock: Indicate the use of mixed-size atomics
  asm-generic: ticket-lock: New generic ticket-based spinlock
  remove the h8300 architecture
2022-05-26 10:50:30 -07:00
Linus Torvalds
ecf0aa5317 ARM: ARMv4T/v5 multiplatform support for v5.19, part 1
This series has been 12 years in the making, it mostly finishes the
 work that was started with the founding of Linaro to clean up platform
 support in the kernel.
 
 The largest change here is a cleanup of the omap1 platform, which
 is the final ARM machine type to get converted to the common-clk
 subsystem. All the omap1 specific drivers are now made independent of the
 mach/*.h headers to allow the platform to be part of a generic ARMv4/v5
 multiplatform kernel. The last bit that enables this support is still
 missing here while we wait for some last dependencies to make it into
 the mainline kernel through other subsystems.
 
 The s3c24xx, ixp4xx, iop32x, ep93xx and dove platforms were all almost
 at the point of allowing multiplatform kernels, this work gets completed
 here along with a few additional cleanup.  At the same time, the s3c24xx
 and s3c64xx are now deprecated and expected to get removed in the future.
 
 The PXA and OMAP1 bits are in a separate branch because of dependencies.
 Once both branches are merged, only the three Intel StrongARM platforms
 (RiscPC, Footbridge/NetWinder and StrongARM1100) need separate kernels,
 and there are no plans to include these.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmKOP3sACgkQmmx57+YA
 GNk+DhAAmrPNuS8JDlCRPa76Nd9PC9aitnnEGYytQ6bgwexKd3qdvP7gdUtr7jlV
 8k4KiGnnZZjEGd4i5cAVhSCyBbCt4oPKhato62KneEsO19xLsVmmTpQg1LPK75do
 mHYKpc+6932Lp6WrtI1F75id0phx684tpZp9P4ggXwMwgYkagq9rcO+mGUNZWDc8
 D9SdAmoObtSCoBCYYbq2VhAPA79mSKKVpLGehzd+Gq5cuf/jJQD0u1E00izkdyZc
 r/5acQ7PHQlVXqSONYgCpkvDTqmjg9cvVCKeKLpFspV3f6vBVRgV60UGfwhpdPHY
 N119KUJtPf81xnLSxsqBFA34LMSerrH72YM5cYupKiiYcTDr+Yw6zrtNR6ktkt/B
 F1Tc/QV+A9CGergxljy39G1smEuwKtNiVA//NSlUORCHxgwa5XUB0mQIzNcWARa4
 oMDLhBF7ES211CB7Yto2FR6gBQbh2A9HSpjOh6kxdHrRb4FCgoXjPhzBoMxPoSFu
 XIzJpMb18K4bI+hKRYddEOK5V0kHt9mzT7ViGT/2+n13IHKIGmKrZxwDH7mohAW9
 4GF77gGbQsE9szajkx5EG1t+PWextQeeMyYW05bXO/mbDwA0n7EdjGpBeedvTZw3
 6gUWVahfYp9hZWPdxJ4fbGnlbSovCq0y4tj5fbZHPh6AOAtmvWY=
 =CTtN
 -----END PGP SIGNATURE-----

Merge tag 'arm-multiplatform-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARMv4T/v5 multiplatform support from Arnd Bergmann:
 "This series has been 12 years in the making, it mostly finishes the
  work that was started with the founding of Linaro to clean up platform
  support in the kernel.

  The largest change here is a cleanup of the omap1 platform, which is
  the final ARM machine type to get converted to the common-clk
  subsystem. All the omap1 specific drivers are now made independent of
  the mach/*.h headers to allow the platform to be part of a generic
  ARMv4/v5 multiplatform kernel.

  The last bit that enables this support is still missing here while we
  wait for some last dependencies to make it into the mainline kernel
  through other subsystems.

  The s3c24xx, ixp4xx, iop32x, ep93xx and dove platforms were all almost
  at the point of allowing multiplatform kernels, this work gets
  completed here along with a few additional cleanup. At the same time,
  the s3c24xx and s3c64xx are now deprecated and expected to get removed
  in the future.

  The PXA and OMAP1 bits are in a separate branch because of
  dependencies. Once both branches are merged, only the three Intel
  StrongARM platforms (RiscPC, Footbridge/NetWinder and StrongARM1100)
  need separate kernels, and there are no plans to include these"

* tag 'arm-multiplatform-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (61 commits)
  ARM: ixp4xx: Consolidate Kconfig fixing issue
  ARM: versatile: Add missing of_node_put in dcscb_init
  ARM: config: Refresh IXP4xx config after multiplatform
  ARM: omap1: add back omap_set_dma_priority() stub
  ARM: omap: fix missing declaration warnings
  ARM: omap: fix address space warnings from sparse
  ARM: spear: remove include/mach/ subdirectory
  ARM: davinci: remove include/mach/ subdirectory
  ARM: omap2: remove include/mach/ subdirectory
  integrator: remove empty ap_init_early()
  ARM: s3c: fix include path
  MAINTAINERS: omap1: Add Janusz as an additional maintainer
  ARM: omap1: htc_herald: fix typos in comments
  ARM: OMAP1: fix typos in comments
  ARM: OMAP1: clock: Remove noop code
  ARM: OMAP1: clock: Remove unused code
  ARM: OMAP1: clock: Fix UART rate reporting algorithm
  ARM: OMAP1: clock: Fix early UART rate issues
  ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCF
  ARM: omap1: fix build with no SoC selected
  ...
2022-05-26 10:43:09 -07:00
Linus Torvalds
d7227785e3 sound updates for 5.19-rc1
Not much dramatic changes at this time, but we've received quite
 a lot of changes for ASoC, while there are still a few fixes and
 quirks for usual HD- and USB-auido.  Here are some highlights.
 
 * ASoC:
 - Overhaul of endianness specification for data formats, avoiding
   needless restrictions due to CODECs
 - Initial stages of Intel AVS driver merge
 - Introduction of v4 IPC mechanism for SOF
 - TDM mode support for AK4613
 - Support for Analog Devices ADAU1361, Cirrus Logic CS35L45, Maxim
   MAX98396, MediaTek MT8186, NXP i.MX8 micfil and SAI interfaces,
   nVidia Tegra186 ASRC, and Texas Instruments TAS2764 and TAS2780
 
 * Others
 - A few regression fixes after the USB-audio endpoint management
   refactoring
 - More enhancements for Cirrus HD-audio codec support (still ongoing)
 - Addition of generic serial MIDI driver
 -----BEGIN PGP SIGNATURE-----
 
 iQJCBAABCAAsFiEEIXTw5fNLNI7mMiVaLtJE4w1nLE8FAmKOEiAOHHRpd2FpQHN1
 c2UuZGUACgkQLtJE4w1nLE96FxAAnoVCecFK955fWInCULe15xYpi9kqngDSLAQk
 k6TkbP8AFyX+3PbIb9YVK9u+fLBaZzdK/ZIRqZNfb5T4q8tVTHphg2P+SNB36qaD
 nTTaEQ6dr6VUJO3fwwVBa3NJ+rGPr8KMKLlQGCg/I8HKdFeW2t/mV1YZI/ZxM7Or
 MXu3F5dt3yVXXMgUb33if+atYCXOwJ9YIqe1WHE4oPTtfOhbwiIdFeHgg88Kq7vJ
 ep7PCbyJ0rqfA9BIAnBfQuD9ZoaS7mKlo9xgyauNBzWnbRVd7dYyUnaxH++XLPPS
 GS0MEgftJfmUay6o++I7qrhoTyMKMHN/CU+6RlR1GD6WBpBhQ6T+poLkFDvKqbL8
 kvFEBFrEf0soeAKkUinzl1wCJnzWvpq2PF0EewQp03A3vOL5MOzGdId1wLKLmbCw
 Z0e0HAKTP4/AQeBluLo/SjiNoeSEU76xYYv8tFGv531ybIhvsF0nm/Suv4VZcy0V
 9tr2gLSORDLTBqSJqCf1JgN8oJht0QLirzgSekk8HUvx1JnIwwAaH1Dvy1DMrjyu
 TQ6oRyDS2giHKh7FItv3+U+HE1CkA89dzDvGrIbKrT6xkodHGzLNr0DxaDGuR11w
 H9f9oFEnGBpBxWmfLkGTa8+oBenTz8YRm4Ti8xhZkJkD1ys/4fjasAYoIKJqdnxH
 iG1DWic=
 =5qBk
 -----END PGP SIGNATURE-----

Merge tag 'sound-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "Not much dramatic changes at this time, but we've received quite a lot
  of changes for ASoC, while there are still a few fixes and quirks for
  usual HD- and USB-auido. Here are some highlights.

  ASoC:

   - Overhaul of endianness specification for data formats, avoiding
     needless restrictions due to CODECs

   - Initial stages of Intel AVS driver merge

   - Introduction of v4 IPC mechanism for SOF

   - TDM mode support for AK4613

   - Support for Analog Devices ADAU1361, Cirrus Logic CS35L45, Maxim
     MAX98396, MediaTek MT8186, NXP i.MX8 micfil and SAI interfaces,
     nVidia Tegra186 ASRC, and Texas Instruments TAS2764 and TAS2780

  Others:

   - A few regression fixes after the USB-audio endpoint management
     refactoring

   - More enhancements for Cirrus HD-audio codec support (still ongoing)

   - Addition of generic serial MIDI driver"

* tag 'sound-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (504 commits)
  ALSA: hda/realtek - Add new type for ALC245
  ALSA: usb-audio: Configure sync endpoints before data
  ALSA: ctxfi: fix typo in comment
  ALSA: cs5535audio: fix typo in comment
  ALSA: ctxfi: Add SB046x PCI ID
  ALSA: usb-audio: Add missing ep_idx in fixed EP quirks
  ALSA: usb-audio: Workaround for clock setup on TEAC devices
  ALSA: lola: Bounds check loop iterator against streams array size
  ASoC: max98090: Move check for invalid values before casting in max98090_put_enab_tlv()
  ASoC: rt1308-sdw: add the default value of register 0xc320
  ASoC: rt9120: Use pm_runtime and regcache to optimize 'pwdnn' logic
  ASoC: rt9120: Fix 3byte read, valule offset typo
  ASoC: amd: acp: Set Speaker enable/disable pin through rt1019 codec driver.
  ASoC: amd: acp: Set Speaker enable/disable pin through rt1019 codec driver
  ASoC: wm2000: fix missing clk_disable_unprepare() on error in wm2000_anc_transition()
  ASoC: codecs: lpass: Fix passing zero to 'PTR_ERR'
  ASoC: SOF: sof-client-ipc-flood-test: use pm_runtime_resume_and_get()
  ASoC: SOF: mediatek: remove duplicate include in mt8195.c
  ASoC: SOF: mediatek: Add mt8195 debug dump
  ASoC: SOF: mediatek: Add mediatek common debug dump
  ...
2022-05-25 16:55:16 -07:00
Linus Torvalds
537e62c865 printk changes for 5.19
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEESH4wyp42V4tXvYsjUqAMR0iAlPIFAmKLXH8ACgkQUqAMR0iA
 lPIABhAAtAZRmvg9UjUS8dpmS3plXdg/zJU0AbK9o/m/hGzMfs2bgHxwM7mbGa1O
 VC0Jczj9tfJXESfrBsV0ZpY5H+iGilEkTF86/ME4sS8lmIeSim9dAxF4sTvM1vw/
 IST4llN0IRuNHwrb20GyH44MOG9JwFwEyIgYITwkB8iYK/lo/sP8xkZuC44CmaJf
 28ZZAwICigtyR9lF0psQGLgMc4+laT5l3XF/c9OyqEFbB5khBGxT0RwV0WS4ZcPA
 mTn5kW6WcDbTNKUVUHW1jzmJBq3ci+0ckh6jLNJWc6Olh5jbGU7selVTst96GQKm
 sgWF7uykURls3ZFPzTJSY6E3Gnwrsw75RQYDLtTOSxqB2NlVsBTyZq4jgNtxiR3z
 ovA9souDe4t/BPqkHTHZkVEyaFWZlRwNlzJZIwN2Auy/uFjznWnOQxT2t3BYUZt5
 8qnUt+JBvtSNyLDvoNtQnyCiCyEZdyrHQ+3RsFWIQz6CnA34Xh6oZPxbK24pnfDy
 F5OuIulrpIPfEFufV6ZR30QeB2gLkvCorUfl5pde4QL/Pujxrk6CCikv39QOfL7K
 6+X7hq/Moq8vhzMfWl+LEPS6qpAwNJl69JIaQrp18JHVGeKVagS1e6pOmThSOPv7
 bDucE08oOK8KTnR6ysfKf24JC6HopB7vFYfhSEa8rgssDLtcGso=
 =pN3o
 -----END PGP SIGNATURE-----

Merge tag 'printk-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux

Pull printk updates from Petr Mladek:

 - Offload writing printk() messages on consoles to per-console
   kthreads.

   It prevents soft-lockups when an extensive amount of messages is
   printed. It was observed, for example, during boot of large systems
   with a lot of peripherals like disks or network interfaces.

   It prevents live-lockups that were observed, for example, when
   messages about allocation failures were reported and a CPU handled
   consoles instead of reclaiming the memory. It was hard to solve even
   with rate limiting because it would need to take into account the
   amount of messages and the speed of all consoles.

   It is a must to have for real time. Otherwise, any printk() might
   break latency guarantees.

   The per-console kthreads allow to handle each console on its own
   speed. Slow consoles do not longer slow down faster ones. And
   printk() does not longer unpredictably slows down various code paths.

   There are situations when the kthreads are either not available or
   not reliable, for example, early boot, suspend, or panic. In these
   situations, printk() uses the legacy mode and tries to handle
   consoles immediately.

 - Add documentation for the printk index.

* tag 'printk-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
  printk, tracing: fix console tracepoint
  printk: remove @console_locked
  printk: extend console_lock for per-console locking
  printk: add kthread console printers
  printk: add functions to prefer direct printing
  printk: add pr_flush()
  printk: move buffer definitions into console_emit_next_record() caller
  printk: refactor and rework printing logic
  printk: add con_printk() macro for console details
  printk: call boot_delay_msec() in printk_delay()
  printk: get caller_id/timestamp after migration disable
  printk: wake waiters for safe and NMI contexts
  printk: wake up all waiters
  printk: add missing memory barrier to wake_up_klogd()
  printk: cpu sync always disable interrupts
  printk: rename cpulock functions
  printk/index: Printk index feature documentation
  MAINTAINERS: Add printk indexing maintainers on mention of printk_index
2022-05-25 10:32:08 -07:00
Linus Torvalds
fdd8f6585c m68k updates for v5.19
- Introduce virtual m68k machine based on Android Goldfish devices,
   - Defconfig updates,
   - Minor fixes and improvements.
 -----BEGIN PGP SIGNATURE-----
 
 iIsEABYIADMWIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYotRMhUcZ2VlcnRAbGlu
 dXgtbTY4ay5vcmcACgkQisJQ/WRJ8XDFmgD/ZFTY4HashrodaQQLeRnwF1e2fDSY
 yvpDfaJJf9vJY0kBAM/yflOMfPHeUOe1rLY0twevuZTgDUIv4f+Oi+9jtYUN
 =ccFr
 -----END PGP SIGNATURE-----

Merge tag 'm68k-for-v5.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k

Pull m68k updates from Geert Uytterhoeven:

  - Introduce virtual m68k machine based on Android Goldfish devices

  - defconfig updates

  - Minor fixes and improvements

* tag 'm68k-for-v5.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: atari: Make Atari ROM port I/O write macros return void
  m68k: math-emu: Fix dependencies of math emulation support
  m68k: math-emu: Fix typos in comments
  m68k: Wire up syscall_trace_enter/leave for m68k
  m68k: defconfig: Update defconfigs for v5.18-rc1
  m68k: Introduce a virtual m68k machine
  clocksource/drivers: Add a goldfish-timer clocksource
  rtc: goldfish: Use gf_ioread32()/gf_iowrite32()
  tty: goldfish: Introduce gf_ioread32()/gf_iowrite32()
2022-05-23 20:56:17 -07:00
Takashi Iwai
0163717ed5 ASoC: Updates for v5.19
This is quite a big update, partly due to the addition of some larger
 drivers (more of which is to follow since at least the AVS driver is
 still a work in progress) and partly due to Charles' work sorting out
 our handling of endianness.  As has been the case recently it's much
 more about drivers than the core.
 
  - Overhaul of endianness specification for data formats, avoiding
    needless restrictions due to CODECs.
  - Initial stages of Intel AVS driver merge.
  - Introduction of v4 IPC mechanism for SOF.
  - TDM mode support for AK4613.
  - Support for Analog Devices ADAU1361, Cirrus Logic CS35L45, Maxim
    MAX98396, MediaTek MT8186, NXP i.MX8 micfil and SAI interfaces,
    nVidia Tegra186 ASRC, and Texas Instruments TAS2764 and TAS2780
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmKLf5EACgkQJNaLcl1U
 h9ASqAf/YnwbFP919ree/DEKUDCNc4klUH5M4JOexXbZlZDqxKYRGZjoLuiwX/PQ
 Au/xOjGEvm3Yg5/g5c8YFVNcIkv1O8VclRkV59oIxlBwKmQeTKvq+lOmlel2l1wZ
 XOmvHjE46wxH1N1cLwL6KkX0YDn59orSZGYZRpfLjL61y6LQWsLNU0tY6AWCRATB
 Llnrbu+DYgCsYNTEOOOY5s4V+4LkQm8TLdft91Va7mBdkPPRFoXRO0HGcVBqbkoN
 7pf2mrjrLAWL9yuA8FlrgJbHq58DF9WGe5uEU7qlVL1zw46ClgIM0ABxPOdNdjV2
 Wzb1jI7GmztgQNxlR9BcJB0kxAj9vA==
 =oD5l
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v5.19' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v5.19

This is quite a big update, partly due to the addition of some larger
drivers (more of which is to follow since at least the AVS driver is
still a work in progress) and partly due to Charles' work sorting out
our handling of endianness.  As has been the case recently it's much
more about drivers than the core.

 - Overhaul of endianness specification for data formats, avoiding
   needless restrictions due to CODECs.
 - Initial stages of Intel AVS driver merge.
 - Introduction of v4 IPC mechanism for SOF.
 - TDM mode support for AK4613.
 - Support for Analog Devices ADAU1361, Cirrus Logic CS35L45, Maxim
   MAX98396, MediaTek MT8186, NXP i.MX8 micfil and SAI interfaces,
   nVidia Tegra186 ASRC, and Texas Instruments TAS2764 and TAS2780
2022-05-23 16:03:04 +02:00
Ilpo Järvinen
25e02ba60f tty: Rework receive flow control char logic
Add a helper to check if the character is a flow control one. This
rework prepares for adding lookahead done check cleanly to
n_tty_receive_char_flow_ctrl() between n_tty_is_char_flow_ctrl() and
the actions taken on the flow control characters.

No functional changes intended.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220426144935.54893-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19 18:33:34 +02:00
Ilpo Järvinen
1deeda8d28 serial: stm32-usart: Correct CSIZE, bits, and parity
Add CSIZE sanitization for unsupported CSIZE configurations. In
addition, if parity is asked for but CSx was unsupported, the sensible
result is CS8+parity which requires setting USART_CR1_M0 like with 9
bits.

Incorrect CSIZE results in miscalculation of the frame bits in
tty_get_char_size() or in its predecessor where the roughly the same
code is directly within uart_update_timeout().

Fixes: c8a9d04394 (serial: stm32: fix word length configuration)
Cc: Erwan Le Ray <erwan.leray@st.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220519081808.3776-9-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19 18:32:40 +02:00
Ilpo Järvinen
52bb1cb711 serial: st-asc: Sanitize CSIZE and correct PARENB for CS7
Only CS7 and CS8 seem supported but CSIZE is not sanitized from CS5 or
CS6 to CS8. In addition, ASC_CTL_MODE_7BIT_PAR suggests that CS7 has
to have parity, thus add PARENB.

Incorrect CSIZE results in miscalculation of the frame bits in
tty_get_char_size() or in its predecessor where the roughly the same
code is directly within uart_update_timeout().

Fixes: c4b0585607 (serial:st-asc: Add ST ASC driver.)
Cc: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220519081808.3776-8-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19 18:32:40 +02:00
Ilpo Järvinen
c069d2756c serial: sifive: Sanitize CSIZE and c_iflag
Only CS8 is supported but CSIZE was not sanitized to CS8.

Set CSIZE correctly so that userspace knows the effective value.
Incorrect CSIZE also results in miscalculation of the frame bits in
tty_get_char_size() or in its predecessor where the roughly the same
code is directly within uart_update_timeout().

Similarly, INPCK, PARMRK, and BRKINT are reported textually unsupported
but were not cleared in termios c_iflag which is the machine-readable
format.

Fixes: 45c054d081 (tty: serial: add driver for the SiFive UART)
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220519081808.3776-7-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19 18:32:40 +02:00
Ilpo Järvinen
9b87162de8 serial: sh-sci: Don't allow CS5-6
Only CS7 and CS8 seem supported but CSIZE is not sanitized from
CS5 or CS6 to CS8.

Set CSIZE correctly so that userspace knows the effective value.
Incorrect CSIZE also results in miscalculation of the frame bits in
tty_get_char_size() or in its predecessor where the roughly the same
code is directly within uart_update_timeout().

Fixes: 1da177e4c3 (Linux-2.6.12-rc2)
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220519081808.3776-6-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19 18:32:40 +02:00
Ilpo Järvinen
79ac88655d serial: txx9: Don't allow CS5-6
Only CS7 and CS8 are supported but CSIZE is not sanitized with
CS5 or CS6 to CS8.

Set CSIZE correctly so that userspace knows the effective value.
Incorrect CSIZE also results in miscalculation of the frame bits in
tty_get_char_size() or in its predecessor where the roughly the same
code is directly within uart_update_timeout().

Fixes: 1da177e4c3 (Linux-2.6.12-rc2)
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220519081808.3776-5-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19 18:32:40 +02:00
Ilpo Järvinen
098333a9c7 serial: rda-uart: Don't allow CS5-6
Only CS7 and CS8 are supported but CSIZE is not sanitized after
fallthrough from CS5 or CS6 to CS7.

Set CSIZE correctly so that userspace knows the effective value.
Incorrect CSIZE also results in miscalculation of the frame bits in
tty_get_char_size() or in its predecessor where the roughly the same
code is directly within uart_update_timeout().

Fixes: c10b13325c (tty: serial: Add RDA8810PL UART driver)
Cc: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220519081808.3776-4-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19 18:32:39 +02:00
Ilpo Järvinen
fd63031b8c serial: digicolor-usart: Don't allow CS5-6
Only CS7 and CS8 seem supported but CSIZE is not sanitized to CS8 in
the default: block.

Set CSIZE correctly so that userspace knows the effective value.
Incorrect CSIZE also results in miscalculation of the frame bits in
tty_get_char_size() or in its predecessor where the roughly the same
code is directly within uart_update_timeout().

Fixes: 5930cb3511 (serial: driver for Conexant Digicolor USART)
Acked-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220519081808.3776-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19 18:32:39 +02:00
Ilpo Järvinen
3f7fed405c serial: uartlite: Fix BRKINT clearing
BRKINT is within c_iflag rather than c_cflag.

Fixes: ea017f5853 (tty: serial: uartlite: Prevent changing fixed parameters)
Reviewed-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220519081808.3776-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19 18:32:39 +02:00
YueHaibing
0258502f11 serial: cpm_uart: Fix build error without CONFIG_SERIAL_CPM_CONSOLE
drivers/tty/serial/cpm_uart/cpm_uart_core.c: In function ‘cpm_uart_init_port’:
drivers/tty/serial/cpm_uart/cpm_uart_core.c:1251:7: error: ‘udbg_port’ undeclared (first use in this function); did you mean ‘uart_port’?
  if (!udbg_port)
       ^~~~~~~~~
       uart_port

commit d142585bce leave this corner, wrap it with #ifdef block

Fixes: d142585bce ("serial: cpm_uart: Protect udbg definitions by CONFIG_SERIAL_CPM_CONSOLE")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20220518135452.39480-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19 18:31:58 +02:00
Vijaya Krishna Nivarthi
c9d2325cdb serial: core: Do stop_rx in suspend path for console if console_suspend is disabled
For the case of console_suspend disabled, if back to back suspend/resume
test is executed, at the end of test, sometimes console would appear to
be frozen not responding to input. This would happen because, during
resume, rx transactions can come in before system is ready, malfunction
of rx happens in turn resulting in console appearing to be stuck.

Do a stop_rx in suspend sequence to prevent this.

Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com>
Link: https://lore.kernel.org/r/1652692810-31148-1-git-send-email-quic_vnivarth@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19 18:31:52 +02:00
Vijaya Krishna Nivarthi
c2194bc999 tty: serial: qcom-geni-serial: Remove uart frequency table. Instead, find suitable frequency with call to clk_round_rate.
Replace the UART frequency table 'root_freq[]' with logic around
clk_round_rate() so that SoC details like the available clk frequencies
can change and this driver still works. This reduces tight coupling
between this UART driver and the SoC clk driver because we no longer
have to update the 'root_freq[]' array for new SoCs. Instead the driver
determines the available frequencies at runtime.

Signed-off-by: Vijaya Krishna Nivarthi <quic_vnivarth@quicinc.com>
Link: https://lore.kernel.org/r/1652697510-30543-1-git-send-email-quic_vnivarth@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19 18:31:48 +02:00
Ilpo Järvinen
af01792709 serial: 8250_fintek: Check SER_RS485_RTS_* only with RS485
SER_RS485_RTS_ON_SEND and SER_RS485_RTS_AFTER_SEND relate to behavior
within RS485 operation. The driver checks if they have the same value
which is not possible to realize with the hardware. The check is taken
regardless of SER_RS485_ENABLED flag and -EINVAL is returned when the
check fails, which creates problems.

This check makes it unnecessarily complicated to turn RS485 mode off as
simple zeroed serial_rs485 struct will trigger that equal values check.
In addition, the driver itself memsets its rs485 structure to zero when
RS485 is disabled but if userspace would try to make an TIOCSRS485
ioctl() call with the very same struct, it would end up failing with
-EINVAL which doesn't make much sense.

Resolve the problem by moving the check inside SER_RS485_ENABLED block.

Fixes: 7ecc77011c ("serial: 8250_fintek: Return -EINVAL on invalid configuration")
Cc: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/035c738-8ea5-8b17-b1d7-84a7b3aeaa51@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19 18:31:12 +02:00
AngeloGioacchino Del Regno
f0136f6528 Revert "serial: 8250_mtk: Make sure to select the right FEATURE_SEL"
It was found that some MediaTek SoCs are incompatible with this
change. Also, this register was mistakenly understood as it was
related to the 16550A register layout selection but, at least
on some IPs, if not all, it's related to something else unknown.

This reverts commit 6f81fdded0.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Fixes: 6f81fdded0 ("serial: 8250_mtk: Make sure to select the right FEATURE_SEL")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Link: https://lore.kernel.org/r/20220510122620.150342-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19 18:30:12 +02:00
John Ogness
aabdbb1b7a serial: msm_serial: disable interrupts in __msm_console_write()
__msm_console_write() assumes that interrupts are disabled, but
with threaded console printers it is possible that the write()
callback of the console is called with interrupts enabled.

Explicitly disable interrupts using local_irq_save() to preserve
the assumed context.

Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Link: https://lore.kernel.org/r/20220506213324.470461-1-john.ogness@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19 18:29:44 +02:00
John Ogness
589f892ac8 serial: meson: acquire port->lock in startup()
The uart_ops startup() callback is called without interrupts
disabled and without port->lock locked, relatively late during the
boot process (from the call path of console_on_rootfs()). If the
device is a console, it was already previously registered and could
be actively printing messages.

Since the startup() callback is reading/writing registers used by
the console write() callback (AML_UART_CONTROL), its access must
be synchronized using the port->lock. Currently it is not.

The startup() callback is the only function that explicitly enables
interrupts. Without the synchronization, it is possible that
interrupts become accidentally permanently disabled.

CPU0                           CPU1
meson_serial_console_write     meson_uart_startup
--------------------------     ------------------
spin_lock(port->lock)
val = readl(AML_UART_CONTROL)
uart_console_write()
                               writel(INT_EN, AML_UART_CONTROL)
writel(val, AML_UART_CONTROL)
spin_unlock(port->lock)

Add port->lock synchronization to meson_uart_startup() to avoid
racing with meson_serial_console_write().

Also add detailed comments to meson_uart_reset() explaining why it
is *not* using port->lock synchronization.

Link: https://lore.kernel.org/lkml/2a82eae7-a256-f70c-fd82-4e510750906e@samsung.com
Fixes: ff7693d079 ("ARM: meson: serial: add MesonX SoC on-chip uart driver")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Link: https://lore.kernel.org/r/20220508103547.626355-1-john.ogness@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19 18:29:25 +02:00
Andy Shevchenko
57f83e5dd6 serial: 8250_dw: Use dev_err_probe()
Simplify the error path in ->probe() a bit by using dev_err_probe().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220509172129.37770-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19 18:29:02 +02:00
Andy Shevchenko
295b09128d serial: 8250_dw: Use devm_add_action_or_reset()
Slightly simplify ->probe() and drop a few goto labels by using
devm_add_action_or_reset() for clock and reset cleanup.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220509172129.37770-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19 18:29:02 +02:00
Andy Shevchenko
4088ca3edc serial: 8250_dw: Update the list of OF headers used by driver
The of_irq.h and of_platform.h are not used by the driver. On the
other hand, the mod_devicetable.h missed. Drop the former two and
add the latter one.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220509161911.37164-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19 18:28:59 +02:00
Ilpo Järvinen
2da6f1e5f7 serial: jsm: Use B0 instead of 0
Use B0 to check zero baudrate rather than literal 0.

While at it, remove extra parenthesis around CBAUD.

Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220513082906.11096-6-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19 18:26:17 +02:00
Ilpo Järvinen
503f418b10 serial: fsl_lpuart: Remove unnecessary clearing for CRTSCTS
if (termios->c_cflag & CRTSCTS) guarantees that CRTSCTS is not ever set
in the else block so clearing it is unnecessary.

While at it, remove also one pair of extra parenthesis.

Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220513082906.11096-5-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19 18:26:17 +02:00
Ilpo Järvinen
9cca25e276 tty: remove IBSHIFT ifdefs
IBSHIFT is defined by all architectures since commit d0ffb805b7
("arch/alpha, termios: implement BOTHER, IBSHIFT and termios2").

Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220513082906.11096-4-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19 18:26:17 +02:00
Ilpo Järvinen
69648d7bda tty: remove BOTHER ifdefs
BOTHER is defined by all architectures since commit d0ffb805b7
("arch/alpha, termios: implement BOTHER, IBSHIFT and termios2").

Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220513082906.11096-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19 18:26:17 +02:00
Ilpo Järvinen
9fafe73351 tty: remove CMSPAR ifdefs
CMSPAR is defined by all architectures since commit 6bf08cb246
("[PATCH] Add CMSPAR to termbits.h for powerpc and alpha").

Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220513082906.11096-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19 18:26:16 +02:00
Hector Martin
135c579d77 tty: serial: samsung_tty: Fix suspend/resume on S5L
We were restoring the IRQ masks then clearing them again, because
ucon_mask wasn't set properly. Adding that makes suspend/resume
work as intended.

Signed-off-by: Hector Martin <marcan@marcan.st>
Link: https://lore.kernel.org/r/20220502092505.30934-1-marcan@marcan.st
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19 18:24:47 +02:00
Jiri Slaby
b693a8a616 serial: pmac_zilog: remove initial print
Don't report about the driver when loaded. It's unneeded and frowned
upon nowadays.

Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220519075653.31356-4-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19 18:23:19 +02:00
Jiri Slaby
c83a34a530 serial: pmac_zilog: remove tracing prints
Remove debug printouts upon function enter/exit. This can be achieved
better by tracing.

Remove also the one protected by DEBUG_HARD which is not defined anyway.

Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220519075653.31356-3-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19 18:23:19 +02:00
Jiri Slaby
ae1de09341 serial: pmac_zilog: remove unused uart_pmac_port::termios_cache
struct uart_pmac_port contains termios_cache. It is only written and
never read. Remove it as it only occupies space.

Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220519075653.31356-2-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19 18:23:19 +02:00
Jiri Slaby
a5ddc498e7 serial: pmac_zilog: remove unfinished DBDMA support
The support for DBDMA was never completed. Remove the the code that only
maps spaces without real work.

Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220519075653.31356-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19 18:23:19 +02:00
Jiri Slaby
9bb13b2f77 serial: amba-pl011: move header content to .c
There is no point keeping the header content separated. In this case, it
is only an enum. So move the enum to the appropriate source file.

Cc: Russell King <linux@armlinux.org.uk>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220519075720.31402-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19 18:23:09 +02:00
Tony Lindgren
925ea0fa52 tty: n_gsm: Fix packet data hex dump output
The module param debug for n_gsm uses KERN_INFO level, but the hexdump
now uses KERN_DEBUG level. This started after commit 091cb0994e
("lib/hexdump: make print_hex_dump_bytes() a nop on !DEBUG builds").
We now use dynamic_hex_dump() unless DEBUG is set.

This causes no packets to be seen with modprobe n_gsm debug=0x1f unlike
earlier. Let's fix this by adding gsm_hex_dump_bytes() that calls
print_hex_dump() with KERN_INFO to match what n_gsm is doing with the
other debug related output.

Fixes: 091cb0994e ("lib/hexdump: make print_hex_dump_bytes() a nop on !DEBUG builds")
Cc: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20220512131506.1216-1-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-19 18:19:10 +02:00
Greg Kroah-Hartman
d6da35e0c6 Merge 5.18-rc7 into usb-next
We need the tty fixes in here as well, as we need to revert one of them :(

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-16 15:39:23 +02:00
Qi Zheng
6b9dbedbe3 tty: fix deadlock caused by calling printk() under tty_port->lock
pty_write() invokes kmalloc() which may invoke a normal printk() to print
failure message.  This can cause a deadlock in the scenario reported by
syz-bot below:

       CPU0              CPU1                    CPU2
       ----              ----                    ----
                         lock(console_owner);
                                                 lock(&port_lock_key);
  lock(&port->lock);
                         lock(&port_lock_key);
                                                 lock(&port->lock);
  lock(console_owner);

As commit dbdda842fe ("printk: Add console owner and waiter logic to
load balance console writes") said, such deadlock can be prevented by
using printk_deferred() in kmalloc() (which is invoked in the section
guarded by the port->lock).  But there are too many printk() on the
kmalloc() path, and kmalloc() can be called from anywhere, so changing
printk() to printk_deferred() is too complicated and inelegant.

Therefore, this patch chooses to specify __GFP_NOWARN to kmalloc(), so
that printk() will not be called, and this deadlock problem can be
avoided.

Syzbot reported the following lockdep error:

======================================================
WARNING: possible circular locking dependency detected
5.4.143-00237-g08ccc19a-dirty #10 Not tainted
------------------------------------------------------
syz-executor.4/29420 is trying to acquire lock:
ffffffff8aedb2a0 (console_owner){....}-{0:0}, at: console_trylock_spinning kernel/printk/printk.c:1752 [inline]
ffffffff8aedb2a0 (console_owner){....}-{0:0}, at: vprintk_emit+0x2ca/0x470 kernel/printk/printk.c:2023

but task is already holding lock:
ffff8880119c9158 (&port->lock){-.-.}-{2:2}, at: pty_write+0xf4/0x1f0 drivers/tty/pty.c:120

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #2 (&port->lock){-.-.}-{2:2}:
       __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
       _raw_spin_lock_irqsave+0x35/0x50 kernel/locking/spinlock.c:159
       tty_port_tty_get drivers/tty/tty_port.c:288 [inline]          		<-- lock(&port->lock);
       tty_port_default_wakeup+0x1d/0xb0 drivers/tty/tty_port.c:47
       serial8250_tx_chars+0x530/0xa80 drivers/tty/serial/8250/8250_port.c:1767
       serial8250_handle_irq.part.0+0x31f/0x3d0 drivers/tty/serial/8250/8250_port.c:1854
       serial8250_handle_irq drivers/tty/serial/8250/8250_port.c:1827 [inline] 	<-- lock(&port_lock_key);
       serial8250_default_handle_irq+0xb2/0x220 drivers/tty/serial/8250/8250_port.c:1870
       serial8250_interrupt+0xfd/0x200 drivers/tty/serial/8250/8250_core.c:126
       __handle_irq_event_percpu+0x109/0xa50 kernel/irq/handle.c:156
       [...]

-> #1 (&port_lock_key){-.-.}-{2:2}:
       __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
       _raw_spin_lock_irqsave+0x35/0x50 kernel/locking/spinlock.c:159
       serial8250_console_write+0x184/0xa40 drivers/tty/serial/8250/8250_port.c:3198
										<-- lock(&port_lock_key);
       call_console_drivers kernel/printk/printk.c:1819 [inline]
       console_unlock+0x8cb/0xd00 kernel/printk/printk.c:2504
       vprintk_emit+0x1b5/0x470 kernel/printk/printk.c:2024			<-- lock(console_owner);
       vprintk_func+0x8d/0x250 kernel/printk/printk_safe.c:394
       printk+0xba/0xed kernel/printk/printk.c:2084
       register_console+0x8b3/0xc10 kernel/printk/printk.c:2829
       univ8250_console_init+0x3a/0x46 drivers/tty/serial/8250/8250_core.c:681
       console_init+0x49d/0x6d3 kernel/printk/printk.c:2915
       start_kernel+0x5e9/0x879 init/main.c:713
       secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:241

-> #0 (console_owner){....}-{0:0}:
       [...]
       lock_acquire+0x127/0x340 kernel/locking/lockdep.c:4734
       console_trylock_spinning kernel/printk/printk.c:1773 [inline]		<-- lock(console_owner);
       vprintk_emit+0x307/0x470 kernel/printk/printk.c:2023
       vprintk_func+0x8d/0x250 kernel/printk/printk_safe.c:394
       printk+0xba/0xed kernel/printk/printk.c:2084
       fail_dump lib/fault-inject.c:45 [inline]
       should_fail+0x67b/0x7c0 lib/fault-inject.c:144
       __should_failslab+0x152/0x1c0 mm/failslab.c:33
       should_failslab+0x5/0x10 mm/slab_common.c:1224
       slab_pre_alloc_hook mm/slab.h:468 [inline]
       slab_alloc_node mm/slub.c:2723 [inline]
       slab_alloc mm/slub.c:2807 [inline]
       __kmalloc+0x72/0x300 mm/slub.c:3871
       kmalloc include/linux/slab.h:582 [inline]
       tty_buffer_alloc+0x23f/0x2a0 drivers/tty/tty_buffer.c:175
       __tty_buffer_request_room+0x156/0x2a0 drivers/tty/tty_buffer.c:273
       tty_insert_flip_string_fixed_flag+0x93/0x250 drivers/tty/tty_buffer.c:318
       tty_insert_flip_string include/linux/tty_flip.h:37 [inline]
       pty_write+0x126/0x1f0 drivers/tty/pty.c:122				<-- lock(&port->lock);
       n_tty_write+0xa7a/0xfc0 drivers/tty/n_tty.c:2356
       do_tty_write drivers/tty/tty_io.c:961 [inline]
       tty_write+0x512/0x930 drivers/tty/tty_io.c:1045
       __vfs_write+0x76/0x100 fs/read_write.c:494
       [...]

other info that might help us debug this:

Chain exists of:
  console_owner --> &port_lock_key --> &port->lock

Link: https://lkml.kernel.org/r/20220511061951.1114-2-zhengqi.arch@bytedance.com
Link: https://lkml.kernel.org/r/20220510113809.80626-2-zhengqi.arch@bytedance.com
Fixes: b6da31b2c0 ("tty: Fix data race in tty_insert_flip_string_fixed_flag")
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Jiri Slaby <jirislaby@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-05-12 20:38:37 -07:00
Eric W. Biederman
e71ba12407 signal: Replace __group_send_sig_info with send_signal_locked
The function __group_send_sig_info is just a light wrapper around
send_signal_locked with one parameter fixed to a constant value.  As
the wrapper adds no real value update the code to directly call the
wrapped function.

Tested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lkml.kernel.org/r/20220505182645.497868-2-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2022-05-11 14:33:17 -05:00
Indan Zupancic
401fb66a35 fsl_lpuart: Don't enable interrupts too early
If an irq is pending when devm_request_irq() is called, the irq
handler will cause a NULL pointer access because initialisation
is not done yet.

Fixes: 9d7ee0e28d ("tty: serial: lpuart: avoid report NULL interrupt")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Indan Zupancic <Indan.Zupancic@mep-info.com>
Link: https://lore.kernel.org/r/20220505114750.45423-1-Indan.Zupancic@mep-info.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05 23:00:21 +02:00
Daniel Starke
9361ebfbb7 tty: n_gsm: fix invalid gsmtty_write_room() result
gsmtty_write() does not prevent the user to use the full fifo size of 4096
bytes as allocated in gsm_dlci_alloc(). However, gsmtty_write_room() tries
to limit the return value by 'TX_SIZE' and returns a negative value if the
fifo has more than 'TX_SIZE' bytes stored. This is obviously wrong as
'TX_SIZE' is defined as 512.
Define 'TX_SIZE' to the fifo size and use it accordingly for allocation to
keep the current behavior. Return the correct remaining size of the fifo in
gsmtty_write_room() via kfifo_avail().

Fixes: e1eaea46bb ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220504081733.3494-3-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05 23:00:07 +02:00
Daniel Starke
edd5f60c34 tty: n_gsm: fix mux activation issues in gsm_config()
The current implementation activates the mux if it was restarted and opens
the control channel if the mux was previously closed and we are now acting
as initiator instead of responder, which is the default setting.
This has two issues.
1) No mux is activated if we keep all default values and only switch to
initiator. The control channel is not allocated but will be opened next
which results in a NULL pointer dereference.
2) Switching the configuration after it was once configured while keeping
the initiator value the same will not reopen the control channel if it was
closed due to parameter incompatibilities. The mux remains dead.

Fix 1) by always activating the mux if it is dead after configuration.
Fix 2) by always opening the control channel after mux activation.

Fixes: e1eaea46bb ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220504081733.3494-2-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05 23:00:06 +02:00
Daniel Starke
fd442e5ba3 tty: n_gsm: fix buffer over-read in gsm_dlci_data()
'len' is decreased after each octet that has its EA bit set to 0, which
means that the value is encoded with additional octets. However, the final
octet does not decreases 'len' which results in 'len' being one byte too
long. A buffer over-read may occur in tty_insert_flip_string() as it tries
to read one byte more than the passed content size of 'data'.
Decrease 'len' also for the final octet which has the EA bit set to 1 to
write the correct number of bytes from the internal receive buffer to the
virtual tty.

Fixes: 2e124b4a39 ("TTY: switch tty_flip_buffer_push")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220504081733.3494-1-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05 23:00:06 +02:00
AngeloGioacchino Del Regno
e1bfdbc7da serial: 8250_mtk: Fix register address for XON/XOFF character
The XON1/XOFF1 character registers are at offset 0xa0 and 0xa8
respectively, so we cannot use the definition in serial_port.h.

Fixes: bdbd0a7f8f ("serial: 8250-mtk: modify baudrate setting")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220427132328.228297-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05 22:59:10 +02:00
AngeloGioacchino Del Regno
6f81fdded0 serial: 8250_mtk: Make sure to select the right FEATURE_SEL
Set the FEATURE_SEL at probe time to make sure that BIT(0) is enabled:
this guarantees that when the port is configured as AP UART, the
right register layout is interpreted by the UART IP.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220427132328.228297-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05 22:59:10 +02:00
AngeloGioacchino Del Regno
bb0b197aad serial: 8250_mtk: Fix UART_EFR register address
On MediaTek SoCs, the UART IP is 16550A compatible, but there are some
specific quirks: we are declaring a register shift of 2, but this is
only valid for the majority of the registers, as there are some that
are out of the standard layout.

Specifically, this driver is using definitions from serial_reg.h, where
we have a UART_EFR register defined as 2: this results in a 0x8 offset,
but there we have the FCR register instead.

The right offset for the EFR register on MediaTek UART is at 0x98,
so, following the decimal definition convention in serial_reg.h and
accounting for the register left shift of two, add and use the correct
register address for this IP, defined as decimal 38, so that the final
calculation results in (0x26 << 2) = 0x98.

Fixes: bdbd0a7f8f ("serial: 8250-mtk: modify baudrate setting")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220427132328.228297-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05 22:59:10 +02:00
Yang Yingliang
447ee1516f tty/serial: digicolor: fix possible null-ptr-deref in digicolor_uart_probe()
It will cause null-ptr-deref when using 'res', if platform_get_resource()
returns NULL, so move using 'res' after devm_ioremap_resource() that
will check it to avoid null-ptr-deref.
And use devm_platform_get_and_ioremap_resource() to simplify code.

Fixes: 5930cb3511 ("serial: driver for Conexant Digicolor USART")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Baruch Siach <baruch@tkos.co.il>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220505124621.1592697-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05 22:58:36 +02:00
Shanker Donthineni
4419da5d5d tty: hvc: dcc: Bind driver to CPU core0 for reads and writes
Some external debuggers do not handle reads/writes from/to DCC
on secondary cores. Each core has its own DCC device registers,
so when a core reads or writes from/to DCC, it only accesses
its own DCC device. Since kernel code can run on any core,
every time the kernel wants to write to the console, it might
write to a different DCC.

In SMP mode, external debugger creates multiple windows, and
each window shows the DCC output only from that core's DCC.
The result is that console output is either lost or scattered
across windows.

Selecting this debug option will enable code that serializes all
console input and output to core 0. The DCC driver will create
input and output FIFOs that all cores will use. Reads and writes
from/to DCC are handled by a workqueue that runs only core 0.

This is a debug feature to be used only in early stage development
where debug serial console support would not be present. It disables
PM feature like CPU hotplug and is not suitable for production
environment.

Signed-off-by: Shanker Donthineni <shankerd@codeaurora.org>
Acked-by: Adam Wallis <awallis@codeaurora.org>
Signed-off-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: Elliot Berman <eberman@codeaurora.org>
Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Link: https://lore.kernel.org/r/20220428090858.14489-1-quic_saipraka@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05 22:45:57 +02:00
Jiri Slaby
240754894c serial: pch: inline pop_tx() into handle_tx()
Given pop_tx() is a simple loop, inline it directly into handle_tx().

The code in handle_tx() looks much saner and straightforward now.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220503080808.28332-6-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05 22:42:47 +02:00
Jiri Slaby
80219e59ff serial: pch: simplify pop_tx() even more
1) take uart_tx_stopped into account every loop (the same as other uart
   drivers)
2) no need for 'count' variable, operate on 'size' directly

This allows inlining this into handle_tx() nicely in the next patch.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220503080808.28332-5-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05 22:42:47 +02:00
Jiri Slaby
862526523e serial: pch: remove xmit circ_buf size double check
One is in handle_tx() (as "min(xmit->head - xmit->tail, fifo_size))",
another one in pop_tx() (as uart_circ_empty(xmit)). So keep only the
latter.

This makes the code simpler and size variable is not needed now.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220503080808.28332-4-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05 22:42:46 +02:00
Jiri Slaby
9bc995f51d serial: pch: remove debug print from pop_tx
It makes the code overly complicated for no good reason.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220503080808.28332-3-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05 22:42:46 +02:00
Jiri Slaby
fcfb1c3982 serial: pch: decomission pch_uart_hal_write()
It's horrid and if we inline it into callers, we can get rid of a lot of
sugar around.

So:
* x_char handling becomes a single iowrite8.
* xmit->buf handling is a single loop simply writing characters one by
  one directly from the buf instead of complex cnt_to_end computations.
  Until the buf is empty or fifo size is reached.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220503080808.28332-2-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05 22:42:46 +02:00
Jiri Slaby
d9f3af4fbb serial: pch: don't overwrite xmit->buf[0] by x_char
When x_char is to be sent, the TX path overwrites whatever is in the
circular buffer at offset 0 with x_char and sends it using
pch_uart_hal_write(). I don't understand how this was supposed to work
if xmit->buf[0] already contained some character. It must have been
lost.

Remove this whole pop_tx_x() concept and do the work directly in the
callers. (Without printing anything using dev_dbg().)

Cc: <stable@vger.kernel.org>
Fixes: 3c6a483275 (Serial: EG20T: add PCH_UART driver)
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220503080808.28332-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05 22:42:45 +02:00
Jiri Slaby
6c1f77c378 serial: pch: move size check from pop_tx one level up
'count' is zero in the pop_tx()'s comparison against 'size'. So the 'if'
tries to find out if 'size' is negative or zero and returns in that
case. But it cannot be negative, due to previous (size < 0) check in the
caller: handle_tx().

So simply move this check from pop_tx() to handle_tx(). Now it's clear
that pop_tx() is called only if fifo_size is non-zero.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220503080613.27601-2-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05 22:42:45 +02:00
Jiri Slaby
dfb9afb6c0 serial: pic32: restore disabled irqs in pic32_uart_startup()
pic32_uart_startup() disables interrupts by local_irq_save(). But the
function never enables them. The serial core only holds a mutex, so irqs
are not restored.

So how could this driver work? This irq handling was already present in
the driver's initial commit 157b939470 (serial: pic32_uart: Add PIC32
UART driver).

So is it a candidate for removal? Anyone has a contact to the author:
Andrei Pistirica (I believe the one below -- @microchip.com -- will
bounce)? Or to someone else @microchip.com?

Cc: Andrei Pistirica <andrei.pistirica@microchip.com>
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220503063122.20957-12-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05 22:39:20 +02:00
Jiri Slaby
fe36fa18ca serial: pic32: free up irq names correctly
struct pic32_sport contains built-up names for irqs. These are freed
only in error path of pic32_uart_startup(). And even there, the freeing
happens before free_irq().

So fix this by:
* moving frees after free_irq(), and
* add frees to pic32_uart_shutdown() -- the opposite of
  pic32_uart_startup().

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220503063122.20957-11-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05 22:39:19 +02:00
Jiri Slaby
28dc563339 serial: pic32: don't zero members of kzalloc-ated structure
struct pic32_sport (sport) has just been kzallocated. So there is no
need to zero its member (sport->port) now.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220503063122.20957-10-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05 22:39:19 +02:00
Jiri Slaby
0ed55be47c serial: pic32: don't assign pic32_sport::cts_gpio twice
sport->cts_gpio is first assigned -EINVAL and few lines below using
of_get_named_gpio(). Remove the first (useless) assignment.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220503063122.20957-9-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05 22:39:19 +02:00
Jiri Slaby
412314720a serial: pic32: convert to_pic32_sport() to an inline
'c' is not in wrapped in parentheses in the to_pic32_sport() macro, so
it might be problematic wrt macro expansion. Using an inline is always
safer in these cases. Both type-wise and macro-expansion-wise. So switch
the macro to an inline.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220503063122.20957-8-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05 22:39:18 +02:00
Jiri Slaby
343f23cfc2 serial: pic32: remove pic32_get_port() macro
It's just &sport->port. First, sport was not in parenthesis, so macro
expansion could be an issue. Second, it's so simple, that we can expand
the macro and make the code really straightforward.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220503063122.20957-7-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05 22:39:18 +02:00
Jiri Slaby
e8616bd0e9 serial: pic32: simplify pic32_sport::enable_tx_irq handling
Make it a bool, so use true+false. And remove the wrap-around macro --
i.e. access the member directly.

It makes the code more obvious.

BTW the macro did not have 'sport' in parentheses, so it was potentially
problematic wrt expansion.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220503063122.20957-6-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05 22:39:17 +02:00
Jiri Slaby
bb2cff419d serial: pic32: simplify clk handling
struct pic32_sport::ref_clk is only set, but not read. That means we can
remove it. And when we do so, pic32_enable_clock() and
pic32_disable_clock() are simple wrappers around clk_prepare_enable()
and clk_disable_unprepare() respectively. So we can remove the former
two from the code and replace it by the latter two.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220503063122.20957-5-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05 22:39:17 +02:00
Jiri Slaby
08f643e022 serial: pic32: remove constants from struct pic32_sport
All the irqflags_* in struct pic32_sport are set to IRQF_NO_THREAD and
never updated. So remove pic32_sport::irqflags_* and use the flag
directly.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220503063122.20957-4-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05 22:39:17 +02:00
Jiri Slaby
29574d0ded serial: pic32: move header content to .c
There is no point keeping the header content separated. So move the
content to the appropriate source file.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220503063122.20957-3-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05 22:39:16 +02:00
Jiri Slaby
5c83ffd90b serial: pic32: remove unused items from the header
struct pic32_console_opt and its support are unused in pic32. So remove
all that.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20220503063122.20957-2-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05 22:39:16 +02:00
Marek Vasut
d7c7671616 serial: stm32: Use TC interrupt to deassert GPIO RTS in RS485 mode
In case the RS485 mode is emulated using GPIO RTS, use the TC interrupt
to deassert the GPIO RTS, otherwise the GPIO RTS stays asserted after a
transmission ended and the RS485 cannot work.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Erwan Le Ray <erwan.leray@foss.st.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jean Philippe Romain <jean-philippe.romain@foss.st.com>
Cc: Valentin Caron <valentin.caron@foss.st.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-serial@vger.kernel.org
Link: https://lore.kernel.org/r/20220430162845.244655-2-marex@denx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05 22:37:47 +02:00
Marek Vasut
3bcea529b2 serial: stm32: Factor out GPIO RTS toggling into separate function
Pull out the GPIO RTS enable and disable handling into separate function.
Limit the scope of GPIO RTS toggling only to GPIO emulated RS485 too.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Erwan Le Ray <erwan.leray@foss.st.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jean Philippe Romain <jean-philippe.romain@foss.st.com>
Cc: Valentin Caron <valentin.caron@foss.st.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-serial@vger.kernel.org
Link: https://lore.kernel.org/r/20220430162845.244655-1-marex@denx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05 22:37:45 +02:00
Maciej W. Rozycki
4487cd3e5f serial: sifive: Remove duplicate `clkin_rate' setting
The `clkin_rate' member of `struct sifive_serial_port' now duplicates
`uartclk' from nested `struct uart_port', so use `uartclk' throughout
and remove `clkin_rate'.

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2204291656150.9383@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05 22:37:18 +02:00
Maciej W. Rozycki
0a7ff843d5 serial: sifive: Report actual baud base rather than fixed 115200
The base baud value reported is supposed to be the highest baud rate
that can be set for a serial port.  The SiFive FU740-C000 SOC's on-chip
UART supports baud rates of up to 1/16 of the input clock rate, which is
the bus clock `tlclk'[1], often at 130MHz in the case of the HiFive
Unmatched board.

However the sifive UART driver reports a fixed value of 115200 instead:

10010000.serial: ttySIF0 at MMIO 0x10010000 (irq = 1, base_baud = 115200) is a SiFive UART v0
10011000.serial: ttySIF1 at MMIO 0x10011000 (irq = 2, base_baud = 115200) is a SiFive UART v0

even though we already support setting higher baud rates, e.g.:

$ tty
/dev/ttySIF1
$ stty speed
230400

The baud base value is computed by the serial core by dividing the UART
clock recorded in `struct uart_port' by 16, which is also the minimum
value of the clock divider supported, so correct the baud base value
reported by setting the UART clock recorded to the input clock rate
rather than 115200:

10010000.serial: ttySIF0 at MMIO 0x10010000 (irq = 1, base_baud = 8125000) is a SiFive UART v0
10011000.serial: ttySIF1 at MMIO 0x10011000 (irq = 2, base_baud = 8125000) is a SiFive UART v0

References:

[1] "SiFive FU740-C000 Manual", v1p3, SiFive, Inc., August 13, 2021,
    Section 16.9 "Baud Rate Divisor Register (div)", pp.143-144

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: 1f1496a923 ("riscv: Fix sifive serial driver")
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2204291656280.9383@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05 22:37:15 +02:00
Maciej W. Rozycki
366f6c955d serial: 8250: Add proper clock handling for OxSemi PCIe devices
Oxford Semiconductor PCIe (Tornado) 950 serial port devices are driven
by a fixed 62.5MHz clock input derived from the 100MHz PCI Express clock.

We currently drive the device using its default oversampling rate of 16
and the clock prescaler disabled, consequently yielding the baud base of
3906250.  This base is inadequate for some of the high-speed baud rates
such as 460800bps, for which the closest rate possible can be obtained
by dividing the baud base by 8, yielding the baud rate of 488281.25bps,
which is off by 5.9638%.  This is enough for data communication to break
with the remote end talking actual 460800bps, where missed stop bits
have been observed.

We can do better however, by taking advantage of a reduced oversampling
rate, which can be set to any integer value from 4 to 16 inclusive by
programming the TCR register, and by using the clock prescaler, which
can be set to any value from 1 to 63.875 in increments of 0.125 in the
CPR/CPR2 register pair.  The prescaler has to be explicitly enabled
though by setting bit 7 in the MCR or otherwise it is bypassed (in the
enhanced mode that we enable) as if the value of 1 was used.

Make use of these features then as follows:

- Set the baud base to 15625000, reflecting the minimum oversampling
  rate of 4 with the clock prescaler and divisor both set to 1.

- Override the `set_mctrl' and set the MCR shadow there so as to have
  MCR[7] always set and have the 8250 core propagate these settings.

- Override the `get_divisor' handler and determine a good combination of
  parameters by using a lookup table with predetermined value pairs of
  the oversampling rate and the clock prescaler and finding a pair that
  divides the input clock such that the quotient, when rounded to the
  nearest integer, deviates the least from the exact result.  Calculate
  the clock divisor accordingly.

  Scale the resulting oversampling rate (only by powers of two) if
  possible so as to maximise it, reducing the divisor accordingly, and
  avoid a divisor overflow for very low baud rates by scaling the
  oversampling rate and/or the prescaler even if that causes some
  accuracy loss.

  Also handle the historic spd_cust feature so as to allow one to set
  all the three parameters manually to arbitrary values, by keeping the
  low 16 bits for the divisor and then putting TCR in bits 19:16 and
  CPR/CPR2 in bits 28:20, sanitising the bit pattern supplied such as
  to clamp CPR/CPR2 values between 0.000 and 0.875 inclusive to 33.875.
  This preserves compatibility with any existing setups, that is where
  requesting a custom divisor that only has any bits set among the low
  16 the oversampling rate of 16 and the clock prescaler of 33.875 will
  be used as with the original 8250.

  Finally abuse the `frac' argument to store the determined bit patterns
  for the TCR, CPR and CPR2 registers.

- Override the `set_divisor' handler so as to set the TCR, CPR and CPR2
  registers from the `frac' value supplied.  Set the divisor as usual.

With the baud base set to 15625000 and the unsigned 16-bit UART_DIV_MAX
limitation imposed by `serial8250_get_baud_rate' standard baud rates
below 300bps become unavailable in the regular way, e.g. the rate of
200bps requires the baud base to be divided by 78125 and that is beyond
the unsigned 16-bit range.  The historic spd_cust feature can still be
used to obtain such rates if so required.

See Documentation/tty/device_drivers/oxsemi-tornado.rst for more details.

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2204181519450.9383@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05 22:36:48 +02:00
Maciej W. Rozycki
cb5a40e314 serial: 8250: Export ICR access helpers for internal use
Make ICR access helpers available outside 8250_port.c, however retain
them as ordinary static functions so as not to regress code generation.

This is because `serial_icr_write' is currently automatically inlined by
GCC, however `serial_icr_read' is not.  Making them both static inline
would grow code produced, e.g.:

$ i386-linux-gnu-size --format=gnu 8250_port-{old,new}.o
      text       data        bss      total filename
     15065       3378          0      18443 8250_port-old.o
     15289       3378          0      18667 8250_port-new.o

and:

$ riscv64-linux-gnu-size --format=gnu 8250_port-{old,new}.o
      text       data        bss      total filename
     16980       5306          0      22286 8250_port-old.o
     17124       5306          0      22430 8250_port-new.o

while making them external would needlessly add a new module interface
and lose the benefit from `serial_icr_write' getting inlined outside
8250_port.o.

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2204181517500.9383@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05 22:36:46 +02:00
Maciej W. Rozycki
1f32c65bad serial: 8250: Fold EndRun device support into OxSemi Tornado code
The EndRun PTP/1588 dual serial port device is based on the Oxford
Semiconductor OXPCIe952 UART device with the PCI vendor:device ID set
for EndRun Technologies and uses the same sequence to determine the
number of ports available.  Despite that we have duplicate code
specific to the EndRun device.

Remove redundant code then and factor out OxSemi Tornado device
detection.

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2204181516220.9383@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05 22:36:43 +02:00
Ilpo Järvinen
67f12fbe87 serial: men_z135_uart: Drop duplicated iotype assignment
The driver assigns same iotype twice. Drop one of them.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/14b71e1-2396-3d83-3a97-9582765d453@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05 22:34:55 +02:00
Geert Uytterhoeven
9ae081f470 serial: 8250: pxa: Remove unneeded <linux/pm_runtime.h>
The 8250 PXA driver never used Runtime PM, so there was never a need to
include <linux/pm_runtime.h>.

Fixes: ab28f51c77 ("serial: rewrite pxa2xx-uart to use 8250_core")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/9fd96fba9bbbbdeb16af0dc07ae9dee21c8e297c.1651494971.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05 22:34:27 +02:00
Geert Uytterhoeven
174f86b879 serial: 8250: core: Remove unneeded <linux/pm_runtime.h>
The last calls into Runtime PM were moved to 8250_port.c a long time
ago.

Fixes: b6830f6df8 ("serial: 8250: Split base port operations from universal driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/2545eaa7fc552013a5d04c4df027255204e64834.1651494971.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05 22:34:25 +02:00
Heikki Krogerus
e6a08c6949 serial: 8250: dw: Fix NULL pointer dereference
dw8250_platform_data is only used on DT platforms for now.

Fixes: 4a218b277f ("serial: 8250: dw: Create a generic platform data structure")
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220502115621.77985-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-05 22:33:36 +02:00
Greg Kroah-Hartman
9e6a907903 Merge 5.18-rc5 into tty-next
We need the tty/serial fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-02 14:56:14 +02:00
Ilpo Järvinen
5ff33917fa serial: 8250_dwlib: Implement SW half duplex support
This patch enables support for SW half-duplex mode using em485.

Cc: Eric Tremblay <etremblay@distech-controls.com>
Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220426122448.38997-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-26 14:47:32 +02:00
Ilpo Järvinen
642aa7603e serial: 8250_dwlib: RS485 HW half & full duplex support
The Synopsys DesignWare UART can be configured to have HW support for
the RS485 protocol from IP version 4.0 onward. Add support for
hardware-controlled half duplex and full duplex modes.

HW will take care of managing DE and RE, the driver just gives it
permission to use either by setting both to 1.

To ask for full duplex mode, userspace sets SER_RS485_RX_DURING_TX flag
and HW will take care of the rest.

Set delay_rts_before_send and delay_rts_after_send to zero for now. The
granularity of that ABI is too coarse to be useful.

Co-developed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Co-developed-by: Raymond Tan <raymond.tan@intel.com>
Signed-off-by: Raymond Tan <raymond.tan@intel.com>
Co-developed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220426122448.38997-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-26 14:47:28 +02:00
Ilpo Järvinen
b54f7a922d serial: 8250: Handle UART without interrupt on TEMT
Add UART_CAP_NOTEMT for UARTs that lack interrupt on TEMT but want to
use em485. Em485 framework needs to ensure not only FIFO is empty but
also that tx shift register is empty.

This approach uses Uwe Kleine-König's suggestion on simply
using/incrementing stop_tx timer rather than adding another timer. When
UART_CAP_NOTEMT is set and THRE is present w/o TEMT, stop tx timer is
reused to wait for the emptying of the shift register.

This change does not add the UART_CAP_NOTEMT define as it already exist
but is currently no-op. See 7a107b2c6b (Revert "serial: 8250: Handle
UART without interrupt on TEMT using em485") for further details.

Vicente Bergas reported that RTS is deasserted roughly one bit too
early losing stop bit tx. To address this problem, stop_delay now
accounts for one extra bit using rough formula /7 (assumes worst-case
of 2+5 bits). I suspect this glitch had to do with when THRE is getting
asserted. If FIFO is emptied already during the tx of the stop bit,
perhaps it leads to HW asserting THRE early for the normal frame time
formula to work accurately.

Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Eric Tremblay <etremblay@distech-controls.com>
Tested-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220425143410.12703-4-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-26 13:28:58 +02:00
Ilpo Järvinen
e8ffbb71f7 serial: 8250: use THRE & __stop_tx also with DMA
8250 DMA tx complete path lacks calls to normal 8250 stop handling. It
does not use THRE to detect true completion of the tx and also doesn't
call __stop_tx. This leads to problems with em485 that needs to handle
RTS timing.

Instead of handling tx stop internally within 8250 dma code, enable
THRE when tx'able data runs out and tweak serial8250_handle_irq to call
only __stop_tx when uart is using DMA.

It also seems bit early to call serial8250_rpm_put_tx from there while
tx is still underway(?).

Tested-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220425143410.12703-3-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-26 13:28:34 +02:00
Ilpo Järvinen
31f6bd7fad serial: Store character timing information to uart_port
Struct uart_port currently stores FIFO timeout. Having character timing
information readily available is useful. Even serial core itself
determines char_time from port->timeout using inverse calculation.

Store frame_time directly into uart_port. Character time is stored in
nanoseconds to have reasonable precision with high rates. To avoid
overflow, 64-bit math is necessary.

It might be possible to determine timeout from frame_time by
multiplying it with fifosize as needed but only part of the users seem
to be protected by a lock. Thus, this patch does not pursue storing
only frame_time in uart_port.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20220425143410.12703-2-ilpo.jarvinen@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-26 13:28:32 +02:00
Phil Edworthy
070e246217 serial: 8250: dw: Improve RZN1 support
Renesas RZ/N1 SoC features a slightly modified DW UART.

On this SoC, the CPR register value is known but not synthetized in
hardware. We hence need to provide a CPR value in the platform
data. This version of the controller also relies on acting as flow
controller when using DMA, so we need to provide the
"is dma flow controller" quirk.

Co-developed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220422180615.9098-10-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-26 13:25:47 +02:00
Phil Edworthy
aa63d786ce serial: 8250: dw: Add support for DMA flow controlling devices
DW based controllers like the one on Renesas RZ/N1 must be programmed as
flow controllers when using DMA.

* Table 11.45 of the system manual, "Flow Control Combinations", states
  that using UART with DMA requires setting the DMA in the peripheral
  flow controller mode regardless of the direction.

* Chapter 11.6.1.3 of the system manual, "Basic Interface Definitions",
  explains that the burst size in the above case must be configured in
  the peripheral's register DEST/SRC_BURST_SIZE.

Experiments shown that upon Rx timeout, the DMA transaction needed to be
manually cleared as well.

Co-developed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220422180615.9098-9-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-26 13:25:47 +02:00
Miquel Raynal
c9c23d0138 serial: 8250: dw: Move the IO accessors to 8250_dwlib.h
These accessors should be used instead of the regular readl/writel()
helpers. In order to use them also from 8250_dw.c in this directory,
move the helpers to 8250_dwlib.h

There is no functional change.

There is no need for declaring `struct uart_port` or even UPIO_MEM32BE
which both are already included in the 8250_dwlib.h header by 8250.h.

Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220422180615.9098-8-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-26 13:25:47 +02:00
Miquel Raynal
8ef6e1ba71 serial: 8250: dw: Introduce an rx_timeout variable in the IRQ path
In a next change we are going to need the same Rx timeout condition as
we already have in the IRQ handling code. Let's just create a boolean to
clarify what this operation does before reusing it.

There is no functional change.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220422180615.9098-7-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-26 13:25:47 +02:00
Miquel Raynal
e4fb03fe10 serial: 8250: dma: Allow driver operations before starting DMA transfers
One situation where this could be used is when configuring the UART
controller to be the DMA flow controller. This is a typical case where
the driver might need to program a few more registers before starting a
DMA transfer. Provide the necessary infrastructure to support this
case.

Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220422180615.9098-6-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-26 13:25:47 +02:00
Miquel Raynal
593dea000b serial: 8250: dw: Allow to use a fallback CPR value if not synthesized
DW UART controllers can be synthesized without the CPR register.
In this case, allow to the platform information to provide a CPR value.

Co-developed-by: Phil Edworthy <phil.edworthy@renesas.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220422180615.9098-5-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-26 13:25:47 +02:00
Miquel Raynal
ffd381445e serial: 8250: dw: Move the USR register to pdata
This offset is a good candidate to pdata's because it changes depending
on the vendor implementation. Let's move the usr_reg entry from regular
to pdata. This way we can drop initializing it at run time.

Let's also use a define for it instead of defining only the default
value.

Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220422180615.9098-4-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-26 13:25:47 +02:00
Emil Renner Berthing
4a218b277f serial: 8250: dw: Create a generic platform data structure
Use device tree match data rather than multiple calls to
of_device_is_compatible() by introducing a platform data structure and
adding a quirks mask.

Provide a stub to the compatibles without quirks to simplify the
handling of the upcoming changes.

Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
[<miquel.raynal@bootlin.com: Minor changes + creation of a real pdata structure]
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220422180615.9098-3-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-26 13:25:46 +02:00
Phil Edworthy
d9666dfb31 serial: 8250: dw: Move definitions to the shared header
Move the per-device structure and a helper out of the main .c file, into
a shared header as they will both be reused from another .c file.

There is no functional change.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Phil Edworthy <phil.edworthy@renesas.com>
[miquel.raynal@bootlin.com: Extracted from a bigger change]
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20220422180615.9098-2-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-26 13:25:46 +02:00
Changbin Du
5390e7f46b sysrq: do not omit current cpu when showing backtrace of all active CPUs
The backtrace of current CPU also should be printed as it is active. This
change add stack trace for current CPU and print a hint for idle CPU for
the generic workqueue based printing. (x86 already does this)

Now it looks like below:
[  279.401567] sysrq: Show backtrace of all active CPUs
[  279.407234] sysrq: CPU5:
[  279.407505] Call Trace:
[  279.408789] [<ffffffff8000606c>] dump_backtrace+0x2c/0x3a
[  279.411698] [<ffffffff800060ac>] show_stack+0x32/0x3e
[  279.411809] [<ffffffff80542258>] sysrq_handle_showallcpus+0x4c/0xc6
[  279.411929] [<ffffffff80542f16>] __handle_sysrq+0x106/0x26c
[  279.412034] [<ffffffff805436a8>] write_sysrq_trigger+0x64/0x74
[  279.412139] [<ffffffff8029cd48>] proc_reg_write+0x8e/0xe2
[  279.412252] [<ffffffff8021a8f8>] vfs_write+0x90/0x2be
[  279.412362] [<ffffffff8021acd2>] ksys_write+0xa6/0xce
[  279.412467] [<ffffffff8021ad24>] sys_write+0x2a/0x38
[  279.412689] [<ffffffff80003ff8>] ret_from_syscall+0x0/0x2
[  279.417173] sysrq: CPU6: backtrace skipped as idling
[  279.417185] sysrq: CPU4: backtrace skipped as idling
[  279.417187] sysrq: CPU0: backtrace skipped as idling
[  279.417181] sysrq: CPU7: backtrace skipped as idling
[  279.417190] sysrq: CPU1: backtrace skipped as idling
[  279.417193] sysrq: CPU3: backtrace skipped as idling
[  279.417219] sysrq: CPU2:
[  279.419179] Call Trace:
[  279.419440] [<ffffffff8000606c>] dump_backtrace+0x2c/0x3a
[  279.419782] [<ffffffff800060ac>] show_stack+0x32/0x3e
[  279.420015] [<ffffffff80542b30>] showacpu+0x5c/0x96
[  279.420317] [<ffffffff800ba71c>] flush_smp_call_function_queue+0xd6/0x218
[  279.420569] [<ffffffff800bb438>] generic_smp_call_function_single_interrupt+0x14/0x1c
[  279.420798] [<ffffffff800079ae>] handle_IPI+0xaa/0x13a
[  279.421024] [<ffffffff804dcb92>] riscv_intc_irq+0x56/0x70
[  279.421274] [<ffffffff80a05b70>] generic_handle_arch_irq+0x6a/0xfa
[  279.421518] [<ffffffff80004006>] ret_from_exception+0x0/0x10
[  279.421750] [<ffffffff80096492>] rcu_idle_enter+0x16/0x1e

Signed-off-by: Changbin Du <changbin.du@gmail.com>
Link: https://lore.kernel.org/r/20220117154300.2808-1-changbin.du@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-26 13:24:42 +02:00
Wan Jiabing
3d27b05e41 tty: hvcs: simplify if-if to if-else
Use if and else instead of if(A) and if (!A) and fix a coding style.

Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Link: https://lore.kernel.org/r/20220424091310.98780-1-wanjiabing@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-26 13:24:22 +02:00
Wan Jiabing
f0426b4e3b tty/hvc_opal: simplify if-if to if-else
Use if and else instead of if(A) and if (!A).

Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Link: https://lore.kernel.org/r/20220426071041.168282-1-wanjiabing@vivo.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-26 13:24:17 +02:00
Daniel Starke
1931743305 tty: n_gsm: fix sometimes uninitialized warning in gsm_dlci_modem_output()
'size' may be used uninitialized in gsm_dlci_modem_output() if called with
an adaption that is neither 1 nor 2. The function is currently only called
by gsm_modem_upd_via_data() and only for adaption 2.
Properly handle every invalid case by returning -EINVAL to silence the
compiler warning and avoid future regressions.

Fixes: c19ffe00fe ("tty: n_gsm: fix invalid use of MSC in advanced option")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220425104726.7986-1-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-26 08:09:46 +02:00
John Ogness
2bb2b7b57f printk: add functions to prefer direct printing
Once kthread printing is available, console printing will no longer
occur in the context of the printk caller. However, there are some
special contexts where it is desirable for the printk caller to
directly print out kernel messages. Using pr_flush() to wait for
threaded printers is only possible if the caller is in a sleepable
context and the kthreads are active. That is not always the case.

Introduce printk_prefer_direct_enter() and printk_prefer_direct_exit()
functions to explicitly (and globally) activate/deactivate preferred
direct console printing. The term "direct console printing" refers to
printing to all enabled consoles from the context of the printk
caller. The term "prefer" is used because this type of printing is
only best effort. If the console is currently locked or other
printers are already actively printing, the printk caller will need
to rely on the other contexts to handle the printing.

This preferred direct printing is how all printing has been handled
until now (unless it was explicitly deferred).

When kthread printing is introduced, there may be some unanticipated
problems due to kthreads being unable to flush important messages.
In order to minimize such risks, preferred direct printing is
activated for the primary important messages when the system
experiences general types of major errors. These are:

 - emergency reboot/shutdown
 - cpu and rcu stalls
 - hard and soft lockups
 - hung tasks
 - warn
 - sysrq

Note that since kthread printing does not yet exist, no behavior
changes result from this commit. This is only implementing the
counter and marking the various places where preferred direct
printing is active.

Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Paul E. McKenney <paulmck@kernel.org> # for RCU
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20220421212250.565456-13-john.ogness@linutronix.de
2022-04-22 21:30:58 +02:00
Maciej W. Rozycki
637674fa40 serial: 8250: Correct the clock for EndRun PTP/1588 PCIe device
The EndRun PTP/1588 dual serial port device is based on the Oxford
Semiconductor OXPCIe952 UART device with the PCI vendor:device ID set
for EndRun Technologies and is therefore driven by a fixed 62.5MHz clock
input derived from the 100MHz PCI Express clock.  The clock rate is
divided by the oversampling rate of 16 as it is supplied to the baud
rate generator, yielding the baud base of 3906250.

Replace the incorrect baud base of 4000000 with the right value of
3906250 then, complementing commit 6cbe45d8ac ("serial: 8250: Correct
the clock for OxSemi PCIe devices").

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Cc: stable <stable@kernel.org>
Fixes: 1bc8cde46a ("8250_pci: Added driver for Endrun Technologies PTP PCIe card.")
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2204181515270.9383@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-22 16:38:10 +02:00
Maciej W. Rozycki
6e6eebdf5e serial: 8250: Also set sticky MCR bits in console restoration
Sticky MCR bits are lost in console restoration if console suspending
has been disabled.  This currently affects the AFE bit, which works in
combination with RTS which we set, so we want to make sure the UART
retains control of its FIFO where previously requested.  Also specific
drivers may need other bits in the future.

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: 4516d50aab ("serial: 8250: Use canary to restart console after suspend")
Cc: stable@vger.kernel.org # v4.0+
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2204181518490.9383@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-22 16:38:06 +02:00
Daniel Starke
f4f7d63287 tty: n_gsm: fix software flow control handling
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.4.8.1 states that XON/XOFF characters
shall be used instead of Fcon/Fcoff command in advanced option mode to
handle flow control. Chapter 5.4.8.2 describes how XON/XOFF characters
shall be handled. Basic option mode only used Fcon/Fcoff commands and no
XON/XOFF characters. These are treated as data bytes here.
The current implementation uses the gsm_mux field 'constipated' to handle
flow control from the remote peer and the gsm_dlci field 'constipated' to
handle flow control from each DLCI. The later is unrelated to this patch.
The gsm_mux field is correctly set for Fcon/Fcoff commands in
gsm_control_message(). However, the same is not true for XON/XOFF
characters in gsm1_receive().
Disable software flow control handling in the tty to allow explicit
handling by n_gsm.
Add the missing handling in advanced option mode for gsm_mux in
gsm1_receive() to comply with the standard.

This patch depends on the following commit:
Commit 8838b2af23 ("tty: n_gsm: fix SW flow control encoding/handling")

Fixes: e1eaea46bb ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220422071025.5490-3-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-22 16:37:44 +02:00
Daniel Starke
c19ffe00fe tty: n_gsm: fix invalid use of MSC in advanced option
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.4.6.3.7 states that the Modem Status
Command (MSC) shall only be used if the basic option was chosen.
The current implementation uses MSC frames even if advanced option was
chosen to inform the peer about modem line state updates. A standard
conform peer may choose to discard these frames in advanced option mode.
Furthermore, gsmtty_modem_update() is not part of the 'tty_operations'
functions despite its name.
Rename gsmtty_modem_update() to gsm_modem_update() to clarify this. Split
its function into gsm_modem_upd_via_data() and gsm_modem_upd_via_msc()
depending on the encoding and adaption. Introduce gsm_dlci_modem_output()
as adaption of gsm_dlci_data_output() to encode and queue empty frames in
advanced option mode. Use it in gsm_modem_upd_via_data().
gsm_modem_upd_via_msc() is based on the initial gsmtty_modem_update()
function which used only MSC frames to update modem states.

Fixes: e1eaea46bb ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220422071025.5490-2-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-22 16:37:44 +02:00
Daniel Starke
a8c5b8255f tty: n_gsm: fix broken virtual tty handling
Dynamic virtual tty registration was introduced to allow the user to handle
these cases with uevent rules. The following commits relate to this:
Commit 5b87686e32 ("tty: n_gsm: Modify gsmtty driver register method when config requester")
Commit 0b91b53323 ("tty: n_gsm: Save dlci address open status when config requester")
Commit 46292622ad ("tty: n_gsm: clean up indenting in gsm_queue()")

However, the following behavior can be seen with this implementation:
- n_gsm ldisc is activated via ioctl
- all configuration parameters are set to their default value (initiator=0)
- the mux gets activated and attached and gsmtty0 is being registered in
  in gsm_dlci_open() after DLCI 0 was established (DLCI 0 is the control
  channel)
- the user configures n_gsm via ioctl GSMIOC_SETCONF as initiator
- this re-attaches the n_gsm mux
- no new gsmtty devices are registered in gsmld_attach_gsm() because the
  mux is already active
- the initiator side registered only the control channel as gsmtty0
  (which should never happen) and no user channel tty

The commits above make it impossible to operate the initiator side as no
user channel tty is or will be available.
On the other hand, this behavior will make it also impossible to allow DLCI
parameter negotiation on responder side in the future. The responder side
first needs to provide a device for the application before the application
can set its parameters of the associated DLCI via ioctl.
Note that the user application is still able to detect a link establishment
without relaying to uevent by waiting for DTR open on responder side. This
is the same behavior as on a physical serial interface. And on initiator
side a tty hangup can be detected if a link establishment request failed.

Revert the commits above completely to always register all user channels
and no control channel after mux attachment. No other changes are made.

Fixes: 5b87686e32 ("tty: n_gsm: Modify gsmtty driver register method when config requester")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220422071025.5490-1-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-22 16:37:44 +02:00
Hui Wang
41c606879f Revert "serial: sc16is7xx: Clear RS485 bits in the shutdown"
This reverts commit 927728a34f.

Once the uart_port->rs485->flag is set to SER_RS485_ENABLED, the port
should always work in RS485 mode. If users want the port to leave
RS485 mode, they need to call ioctl() to clear SER_RS485_ENABLED.

So here we shouldn't clear the RS485 bits in the shutdown().

Fixes: 927728a34f ("serial: sc16is7xx: Clear RS485 bits in the shutdown")
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20220418094339.678144-1-hui.wang@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-22 16:37:00 +02:00