-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZem4DwAKCRCRxhvAZXjc
ooTRAQDRI6Qz6wJym5Yblta8BScMGbt/SgrdgkoCvT6y83MtqwD+Nv/AZQzi3A3l
9NdULtniW1reuCYkc8R7dYM8S+yAwAc=
=Y1qX
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.9.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull block handle updates from Christian Brauner:
"Last cycle we changed opening of block devices, and opening a block
device would return a bdev_handle. This allowed us to implement
support for restricting and forbidding writes to mounted block
devices. It was accompanied by converting and adding helpers to
operate on bdev_handles instead of plain block devices.
That was already a good step forward but ultimately it isn't necessary
to have special purpose helpers for opening block devices internally
that return a bdev_handle.
Fundamentally, opening a block device internally should just be
equivalent to opening files. So now all internal opens of block
devices return files just as a userspace open would. Instead of
introducing a separate indirection into bdev_open_by_*() via struct
bdev_handle bdev_file_open_by_*() is made to just return a struct
file. Opening and closing a block device just becomes equivalent to
opening and closing a file.
This all works well because internally we already have a pseudo fs for
block devices and so opening block devices is simple. There's a few
places where we needed to be careful such as during boot when the
kernel is supposed to mount the rootfs directly without init doing it.
Here we need to take care to ensure that we flush out any asynchronous
file close. That's what we already do for opening, unpacking, and
closing the initramfs. So nothing new here.
The equivalence of opening and closing block devices to regular files
is a win in and of itself. But it also has various other advantages.
We can remove struct bdev_handle completely. Various low-level helpers
are now private to the block layer. Other helpers were simply
removable completely.
A follow-up series that is already reviewed build on this and makes it
possible to remove bdev->bd_inode and allows various clean ups of the
buffer head code as well. All places where we stashed a bdev_handle
now just stash a file and use simple accessors to get to the actual
block device which was already the case for bdev_handle"
* tag 'vfs-6.9.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (35 commits)
block: remove bdev_handle completely
block: don't rely on BLK_OPEN_RESTRICT_WRITES when yielding write access
bdev: remove bdev pointer from struct bdev_handle
bdev: make struct bdev_handle private to the block layer
bdev: make bdev_{release, open_by_dev}() private to block layer
bdev: remove bdev_open_by_path()
reiserfs: port block device access to file
ocfs2: port block device access to file
nfs: port block device access to files
jfs: port block device access to file
f2fs: port block device access to files
ext4: port block device access to file
erofs: port device access to file
btrfs: port device access to file
bcachefs: port block device access to file
target: port block device access to file
s390: port block device access to file
nvme: port block device access to file
block2mtd: port device access to files
bcache: port block device access to files
...
Just use the request_queue from the gendisk pointer in the relatively
few places that sill need it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed--by: Song Liu <song@kernel.org>
Tested-by: Song Liu <song@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240303140150.5435-11-hch@lst.de
Initial queue limits are now set from ->run. Remove the superfluous
initialization in md_alloc and level_store.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed--by: Song Liu <song@kernel.org>
Tested-by: Song Liu <song@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240303140150.5435-10-hch@lst.de
Add a few helpers that wrap the block queue limits API for use in MD.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed--by: Song Liu <song@kernel.org>
Tested-by: Song Liu <song@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240303140150.5435-5-hch@lst.de
Add a helper to check for a DM-mapped MD device instead of using
the obfuscated ->gendisk or ->queue NULL checks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed--by: Song Liu <song@kernel.org>
Tested-by: Song Liu <song@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240303140150.5435-4-hch@lst.de
Add a small wrapper around blk_add_trace_msg that hides some argument
dereferences and the check for a DM-mapped MD device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed--by: Song Liu <song@kernel.org>
Tested-by: Song Liu <song@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240303140150.5435-3-hch@lst.de
Add a helper to trace bio remapping that hides some argument
dereferences and the check for a DM-mapped MD device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed--by: Song Liu <song@kernel.org>
Tested-by: Song Liu <song@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240303140150.5435-2-hch@lst.de
For raid456, if reshape is still in progress, then IO across reshape
position will wait for reshape to make progress. However, for dm-raid,
in following cases reshape will never make progress hence IO will hang:
1) the array is read-only;
2) MD_RECOVERY_WAIT is set;
3) MD_RECOVERY_FROZEN is set;
After commit c467e97f07 ("md/raid6: use valid sector values to determine
if an I/O should wait on the reshape") fix the problem that IO across
reshape position doesn't wait for reshape, the dm-raid test
shell/lvconvert-raid-reshape.sh start to hang:
[root@fedora ~]# cat /proc/979/stack
[<0>] wait_woken+0x7d/0x90
[<0>] raid5_make_request+0x929/0x1d70 [raid456]
[<0>] md_handle_request+0xc2/0x3b0 [md_mod]
[<0>] raid_map+0x2c/0x50 [dm_raid]
[<0>] __map_bio+0x251/0x380 [dm_mod]
[<0>] dm_submit_bio+0x1f0/0x760 [dm_mod]
[<0>] __submit_bio+0xc2/0x1c0
[<0>] submit_bio_noacct_nocheck+0x17f/0x450
[<0>] submit_bio_noacct+0x2bc/0x780
[<0>] submit_bio+0x70/0xc0
[<0>] mpage_readahead+0x169/0x1f0
[<0>] blkdev_readahead+0x18/0x30
[<0>] read_pages+0x7c/0x3b0
[<0>] page_cache_ra_unbounded+0x1ab/0x280
[<0>] force_page_cache_ra+0x9e/0x130
[<0>] page_cache_sync_ra+0x3b/0x110
[<0>] filemap_get_pages+0x143/0xa30
[<0>] filemap_read+0xdc/0x4b0
[<0>] blkdev_read_iter+0x75/0x200
[<0>] vfs_read+0x272/0x460
[<0>] ksys_read+0x7a/0x170
[<0>] __x64_sys_read+0x1c/0x30
[<0>] do_syscall_64+0xc6/0x230
[<0>] entry_SYSCALL_64_after_hwframe+0x6c/0x74
This is because reshape can't make progress.
For md/raid, the problem doesn't exist because register new sync_thread
doesn't rely on the IO to be done any more:
1) If array is read-only, it can switch to read-write by ioctl/sysfs;
2) md/raid never set MD_RECOVERY_WAIT;
3) If MD_RECOVERY_FROZEN is set, mddev_suspend() doesn't hold
'reconfig_mutex', hence it can be cleared and reshape can continue by
sysfs api 'sync_action'.
However, I'm not sure yet how to avoid the problem in dm-raid yet. This
patch on the one hand make sure raid_message() can't change
sync_thread() through raid_message() after presuspend(), on the other
hand detect the above 3 cases before wait for IO do be done in
dm_suspend(), and let dm-raid requeue those IO.
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Acked-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240305072306.2562024-9-yukuai1@huaweicloud.com
1) commit f52f5c71f3 ("md: fix stopping sync thread") remove
MD_RECOVERY_FROZEN from __md_stop_writes() and doesn't realize that
dm-raid relies on __md_stop_writes() to frozen sync_thread
indirectly. Fix this problem by adding MD_RECOVERY_FROZEN in
md_stop_writes(), and since stop_sync_thread() is only used for
dm-raid in this case, also move stop_sync_thread() to
md_stop_writes().
2) The flag MD_RECOVERY_FROZEN doesn't mean that sync thread is frozen,
it only prevent new sync_thread to start, and it can't stop the
running sync thread; In order to frozen sync_thread, after seting the
flag, stop_sync_thread() should be used.
3) The flag MD_RECOVERY_FROZEN doesn't mean that writes are stopped, use
it as condition for md_stop_writes() in raid_postsuspend() doesn't
look correct. Consider that reentrant stop_sync_thread() do nothing,
always call md_stop_writes() in raid_postsuspend().
4) raid_message can set/clear the flag MD_RECOVERY_FROZEN at anytime,
and if MD_RECOVERY_FROZEN is cleared while the array is suspended,
new sync_thread can start unexpected. Fix this by disallow
raid_message() to change sync_thread status during suspend.
Note that after commit f52f5c71f3 ("md: fix stopping sync thread"), the
test shell/lvconvert-raid-reshape.sh start to hang in stop_sync_thread(),
and with previous fixes, the test won't hang there anymore, however, the
test will still fail and complain that ext4 is corrupted. And with this
patch, the test won't hang due to stop_sync_thread() or fail due to ext4
is corrupted anymore. However, there is still a deadlock related to
dm-raid456 that will be fixed in following patches.
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Closes: https://lore.kernel.org/all/e5e8afe2-e9a8-49a2-5ab0-958d4065c55e@redhat.com/
Fixes: 1af2048a3e ("dm raid: fix deadlock caused by premature md_stop_writes()")
Fixes: 9dbd1aa3a8 ("dm raid: add reshaping support to the target")
Fixes: f52f5c71f3 ("md: fix stopping sync thread")
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Acked-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240305072306.2562024-6-yukuai1@huaweicloud.com
Add new helpers:
void md_idle_sync_thread(struct mddev *mddev);
void md_frozen_sync_thread(struct mddev *mddev);
void md_unfrozen_sync_thread(struct mddev *mddev);
The helpers will be used in dm-raid in later patches to fix regressions
and prevent calling md_reap_sync_thread() directly.
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Acked-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240305072306.2562024-3-yukuai1@huaweicloud.com
After commit 9dbd1aa3a8 ("dm raid: add reshaping support to the
target") raid_ctr() will set MD_RECOVERY_FROZEN before md_run() and
expect to keep array frozen until resume. However, md_run() will clear
the flag by setting mddev->recovery to 0.
Before commit 1baae052cc ("md: Don't ignore suspended array in
md_check_recovery()"), dm-raid actually relied on suspending to prevent
starting new sync_thread.
Fix this problem by keeping 'MD_RECOVERY_FROZEN' for dm-raid in
md_run().
Fixes: 1baae052cc ("md: Don't ignore suspended array in md_check_recovery()")
Fixes: 9dbd1aa3a8 ("dm raid: add reshaping support to the target")
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Xiao Ni <xni@redhat.com>
Acked-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240305072306.2562024-2-yukuai1@huaweicloud.com
If 'mddev->pers' is NULL, there is nothing to do in md_set_readonly().
Except for md_ioctl(), the other two callers of md_set_readonly() have
already checked 'mddev->pers'. To simplify the code, move the check of
'mddev->pers' to the caller.
Signed-off-by: Li Nan <linan122@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240226031444.3606764-10-linan666@huaweicloud.com
Before stopping or setting readonly, mddev_set_closing_and_sync_blockdev()
is always called to check the openers. So no longer need to check it again
in do_md_stop() and md_set_readonly(). Clean it up.
Signed-off-by: Li Nan <linan122@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240226031444.3606764-9-linan666@huaweicloud.com
Commit a05b7ea03d ("md: avoid crash when stopping md array races
with closing other open fds.") added sync_block before stopping raid and
setting readonly. Later in commit 260fa034ef ("md: avoid deadlock when
dirty buffers during md_stop.") it is moved to ioctl. array_state_store()
was ignored. Add sync blockdev to array_state_store() now.
Signed-off-by: Li Nan <linan122@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240226031444.3606764-8-linan666@huaweicloud.com
The raid should not be opened anymore when it is about to be stopped.
However, other processes can open it again if the flag MD_CLOSING is
cleared before exiting. From now on, this flag will not be cleared when
the raid will be stopped.
Fixes: 065e519e71 ("md: MD_CLOSING needs to be cleared after called md_set_readonly or do_md_stop")
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240226031444.3606764-6-linan666@huaweicloud.com
There is nothing to do at 'out' before setting 'did_set_md_closing'
in md_ioctl(). Return directly, and it will help us to remove
'did_set_md_closing' later.
Signed-off-by: Li Nan <linan122@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240226031444.3606764-5-linan666@huaweicloud.com
'disk->private_data' is set to mddev in md_alloc() and never set to NULL,
and users need to open mddev before submitting ioctl. So mddev must not
have been freed during ioctl, and there is no need to check mddev here.
Clean up it.
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240226031444.3606764-4-linan666@huaweicloud.com
Pass a queue_limits to blk_alloc_disk and apply it if non-NULL. This
will allow allocating queues with valid queue limits instead of setting
the values one at a time later.
Also change blk_alloc_disk to return an ERR_PTR instead of just NULL
which can't distinguish errors.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Link: https://lore.kernel.org/r/20240215071055.2201424-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
md_start_sync() will suspend the array if there are spares that can be
added or removed from conf, however, if reshape is still in progress,
this won't happen at all or data will be corrupted(remove_and_add_spares
won't be called from md_choose_sync_action for reshape), hence there is
no need to suspend the array if reshape is not done yet.
Meanwhile, there is a potential deadlock for raid456:
1) reshape is interrupted;
2) set one of the disk WantReplacement, and add a new disk to the array,
however, recovery won't start until the reshape is finished;
3) then issue an IO across reshpae position, this IO will wait for
reshape to make progress;
4) continue to reshape, then md_start_sync() found there is a spare disk
that can be added to conf, mddev_suspend() is called;
Step 4 and step 3 is waiting for each other, deadlock triggered. Noted
this problem is found by code review, and it's not reporduced yet.
Fix this porblem by don't suspend the array for interrupted reshape,
this is safe because conf won't be changed until reshape is done.
Fixes: bc08041b32 ("md: suspend array in md_start_sync() if array need reconfiguration")
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240201092559.910982-6-yukuai1@huaweicloud.com
Currently, if reshape is interrupted, then reassemble the array will
register sync_thread directly from pers->run(), in this case
'MD_RECOVERY_RUNNING' is set directly, however, there is no guarantee
that md_do_sync() will be executed, hence stop_sync_thread() will hang
because 'MD_RECOVERY_RUNNING' can't be cleared.
Last patch make sure that md_do_sync() will set MD_RECOVERY_DONE,
however, following hang can still be triggered by dm-raid test
shell/lvconvert-raid-reshape.sh occasionally:
[root@fedora ~]# cat /proc/1982/stack
[<0>] stop_sync_thread+0x1ab/0x270 [md_mod]
[<0>] md_frozen_sync_thread+0x5c/0xa0 [md_mod]
[<0>] raid_presuspend+0x1e/0x70 [dm_raid]
[<0>] dm_table_presuspend_targets+0x40/0xb0 [dm_mod]
[<0>] __dm_destroy+0x2a5/0x310 [dm_mod]
[<0>] dm_destroy+0x16/0x30 [dm_mod]
[<0>] dev_remove+0x165/0x290 [dm_mod]
[<0>] ctl_ioctl+0x4bb/0x7b0 [dm_mod]
[<0>] dm_ctl_ioctl+0x11/0x20 [dm_mod]
[<0>] vfs_ioctl+0x21/0x60
[<0>] __x64_sys_ioctl+0xb9/0xe0
[<0>] do_syscall_64+0xc6/0x230
[<0>] entry_SYSCALL_64_after_hwframe+0x6c/0x74
Meanwhile mddev->recovery is:
MD_RECOVERY_RUNNING |
MD_RECOVERY_INTR |
MD_RECOVERY_RESHAPE |
MD_RECOVERY_FROZEN
Fix this problem by remove the code to register sync_thread directly
from raid10 and raid5. And let md_check_recovery() to register
sync_thread.
Fixes: f67055780c ("[PATCH] md: Checkpoint and allow restart of raid5 reshape")
Fixes: f52f5c71f3 ("md: fix stopping sync thread")
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240201092559.910982-5-yukuai1@huaweicloud.com
stop_sync_thread() will interrupt md_do_sync(), and md_do_sync() must
set MD_RECOVERY_DONE, so that follow up md_check_recovery() will
unregister sync_thread, clear MD_RECOVERY_RUNNING and wake up
stop_sync_thread().
If MD_RECOVERY_WAIT is set or the array is read-only, md_do_sync() will
return without setting MD_RECOVERY_DONE, and after commit f52f5c71f3
("md: fix stopping sync thread"), dm-raid switch from
md_reap_sync_thread() to stop_sync_thread() to unregister sync_thread
from md_stop() and md_stop_writes(), causing the test
shell/lvconvert-raid-reshape.sh hang.
We shouldn't switch back to md_reap_sync_thread() because it's
problematic in the first place. Fix the problem by making sure
md_do_sync() will set MD_RECOVERY_DONE.
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Closes: https://lore.kernel.org/all/ece2b06f-d647-6613-a534-ff4c9bec1142@redhat.com/
Fixes: d5d885fd51 ("md: introduce new personality funciton start()")
Fixes: 5fd6c1dce0 ("[PATCH] md: allow checkpoint of recovery with version-1 superblock")
Fixes: f52f5c71f3 ("md: fix stopping sync thread")
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240201092559.910982-4-yukuai1@huaweicloud.com
Usually if the array is not read-write, md_check_recovery() won't
register new sync_thread in the first place. And if the array is
read-write and sync_thread is registered, md_set_readonly() will
unregister sync_thread before setting the array read-only. md/raid
follow this behavior hence there is no problem.
After commit f52f5c71f3 ("md: fix stopping sync thread"), following
hang can be triggered by test shell/integrity-caching.sh:
1) array is read-only. dm-raid update super block:
rs_update_sbs
ro = mddev->ro
mddev->ro = 0
-> set array read-write
md_update_sb
2) register new sync thread concurrently.
3) dm-raid set array back to read-only:
rs_update_sbs
mddev->ro = ro
4) stop the array:
raid_dtr
md_stop
stop_sync_thread
set_bit(MD_RECOVERY_INTR, &mddev->recovery);
md_wakeup_thread_directly(mddev->sync_thread);
wait_event(..., !test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))
5) sync thread done:
md_do_sync
set_bit(MD_RECOVERY_DONE, &mddev->recovery);
md_wakeup_thread(mddev->thread);
6) daemon thread can't unregister sync thread:
md_check_recovery
if (!md_is_rdwr(mddev) &&
!test_bit(MD_RECOVERY_NEEDED, &mddev->recovery))
return;
-> -> MD_RECOVERY_RUNNING can't be cleared, hence step 4 hang;
The root cause is that dm-raid manipulate 'mddev->ro' by itself,
however, dm-raid really should stop sync thread before setting the
array read-only. Unfortunately, I need to read more code before I
can refacter the handler of 'mddev->ro' in dm-raid, hence let's fix
the problem the easy way for now to prevent dm-raid regression.
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Closes: https://lore.kernel.org/all/9801e40-8ac7-e225-6a71-309dcf9dc9aa@redhat.com/
Fixes: ecbfb9f118 ("dm raid: add raid level takeover support")
Fixes: f52f5c71f3 ("md: fix stopping sync thread")
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240201092559.910982-3-yukuai1@huaweicloud.com
mddev_suspend() never stop sync_thread, hence it doesn't make sense to
ignore suspended array in md_check_recovery(), which might cause
sync_thread can't be unregistered.
After commit f52f5c71f3 ("md: fix stopping sync thread"), following
hang can be triggered by test shell/integrity-caching.sh:
1) suspend the array:
raid_postsuspend
mddev_suspend
2) stop the array:
raid_dtr
md_stop
__md_stop_writes
stop_sync_thread
set_bit(MD_RECOVERY_INTR, &mddev->recovery);
md_wakeup_thread_directly(mddev->sync_thread);
wait_event(..., !test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))
3) sync thread done:
md_do_sync
set_bit(MD_RECOVERY_DONE, &mddev->recovery);
md_wakeup_thread(mddev->thread);
4) daemon thread can't unregister sync thread:
md_check_recovery
if (mddev->suspended)
return; -> return directly
md_read_sync_thread
clear_bit(MD_RECOVERY_RUNNING, &mddev->recovery);
-> MD_RECOVERY_RUNNING can't be cleared, hence step 2 hang;
This problem is not just related to dm-raid, fix it by ignoring
suspended array in md_check_recovery(). And follow up patches will
improve dm-raid better to frozen sync thread during suspend.
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Closes: https://lore.kernel.org/all/8fb335e-6d2c-dbb5-d7-ded8db5145a@redhat.com/
Fixes: 68866e425b ("MD: no sync IO while suspended")
Fixes: f52f5c71f3 ("md: fix stopping sync thread")
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240201092559.910982-2-yukuai1@huaweicloud.com
submit_flushes
atomic_set(&mddev->flush_pending, 1);
rdev_for_each_rcu(rdev, mddev)
atomic_inc(&mddev->flush_pending);
bi->bi_end_io = md_end_flush
submit_bio(bi);
/* flush io is done first */
md_end_flush
if (atomic_dec_and_test(&mddev->flush_pending))
percpu_ref_put(&mddev->active_io)
-> active_io is not released
if (atomic_dec_and_test(&mddev->flush_pending))
-> missing release of active_io
For consequence, mddev_suspend() will wait for 'active_io' to be zero
forever.
Fix this problem by releasing 'active_io' in submit_flushes() if
'flush_pending' is decreased to zero.
Fixes: fa2bbff7b0 ("md: synchronize flush io with array reconfiguration")
Cc: stable@vger.kernel.org # v6.1+
Reported-by: Blazej Kucman <blazej.kucman@linux.intel.com>
Closes: https://lore.kernel.org/lkml/20240130172524.0000417b@linux.intel.com/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240201092559.910982-7-yukuai1@huaweicloud.com
Since md_start_sync() will be called without the protect of mddev_lock,
and it can run concurrently with array reconfiguration, traversal of rdev
in it should be protected by RCU lock.
Commit bc08041b32 ("md: suspend array in md_start_sync() if array need
reconfiguration") added md_spares_need_change() to md_start_sync(),
casusing use of rdev without any protection.
Fix this by adding RCU lock in md_spares_need_change().
Fixes: bc08041b32 ("md: suspend array in md_start_sync() if array need reconfiguration")
Cc: stable@vger.kernel.org # 6.7+
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240104133629.1277517-1-lilingfeng@huaweicloud.com
Users may get rdev->mddev by sysfs while rdev is releasing.
So use both READ_ONCE() and WRITE_ONCE() to prevent load/store tearing
and to read/write mddev atomically.
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20231229070500.3602712-1-lilingfeng@huaweicloud.com
On the one hand, mddev_unlock() will call md_wakeup_thread()
unconditionally; on the other hand, md_check_recovery() can't make
progress if 'reconfig_mutex' can't be grabbed. Hence, it really doesn't
make sense to wake up daemon thread while 'reconfig_mutex' is still
grabbed.
Remove all the md_wakup_thread() for 'mddev->thread' while
'reconfig_mtuex' is still grabbed.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20231228125553.2697765-3-yukuai1@huaweicloud.com
The lifetime of sync_thread:
1) Set MD_RECOVERY_NEEDED and wake up daemon thread (by ioctl/sysfs or
other events);
2) Daemon thread woke up, md_check_recovery() found that
MD_RECOVERY_NEEDED is set:
a) try to grab reconfig_mutex;
b) set MD_RECOVERY_RUNNING;
c) clear MD_RECOVERY_NEEDED, and then queue sync_work;
3) md_start_sync() choose sync_action, then register sync_thread;
4) md_do_sync() is done, set MD_RECOVERY_DONE and wake up daemon thread;
5) Daemon thread woke up, md_check_recovery() found that
MD_RECOVERY_DONE is set:
a) try to grab reconfig_mutex;
b) unregister sync_thread;
c) clear MD_RECOVERY_RUNNING and MD_RECOVERY_DONE;
Hence there is no such case that MD_RECOVERY_RUNNING is not set, while
sync_thread is registered.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20231228125553.2697765-2-yukuai1@huaweicloud.com
-----BEGIN PGP SIGNATURE-----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=DLW9
-----END PGP SIGNATURE-----
Merge tag 'for-6.8/block-2024-01-18' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- tcp, fc, and rdma target fixes (Maurizio, Daniel, Hannes,
Christoph)
- discard fixes and improvements (Christoph)
- timeout debug improvements (Keith, Max)
- various cleanups (Daniel, Max, Giuxen)
- trace event string fixes (Arnd)
- shadow doorbell setup on reset fix (William)
- a write zeroes quirk for SK Hynix (Jim)
- MD pull request via Song:
- Sparse warning since v6.0 (Bart)
- /proc/mdstat regression since v6.7 (Yu Kuai)
- Use symbolic error value (Christian)
- IO Priority documentation update (Christian)
- Fix for accessing queue limits without having entered the queue
(Christoph, me)
- Fix for loop dio support (Christoph)
- Move null_blk off deprecated ida interface (Christophe)
- Ensure nbd initializes full msghdr (Eric)
- Fix for a regression with the folio conversion, which is now easier
to hit because of an unrelated change (Matthew)
- Remove redundant check in virtio-blk (Li)
- Fix for a potential hang in sbitmap (Ming)
- Fix for partial zone appending (Damien)
- Misc changes and fixes (Bart, me, Kemeng, Dmitry)
* tag 'for-6.8/block-2024-01-18' of git://git.kernel.dk/linux: (45 commits)
Documentation: block: ioprio: Update schedulers
loop: fix the the direct I/O support check when used on top of block devices
blk-mq: Remove the hctx 'run' debugfs attribute
nbd: always initialize struct msghdr completely
block: Fix iterating over an empty bio with bio_for_each_folio_all
block: bio-integrity: fix kcalloc() arguments order
virtio_blk: remove duplicate check if queue is broken in virtblk_done
sbitmap: remove stale comment in sbq_calc_wake_batch
block: Correct a documentation comment in blk-cgroup.c
null_blk: Remove usage of the deprecated ida_simple_xx() API
block: ensure we hold a queue reference when using queue limits
blk-mq: rename blk_mq_can_use_cached_rq
block: print symbolic error name instead of error code
blk-mq: fix IO hang from sbitmap wakeup race
nvmet-rdma: avoid circular locking dependency on install_queue()
nvmet-tcp: avoid circular locking dependency on install_queue()
nvme-pci: set doorbell config before unquiescing
block: fix partial zone append completion handling in req_bio_endio()
block/iocost: silence warning on 'last_period' potentially being unused
md/raid1: Use blk_opf_t for read and write operations
...
-----BEGIN PGP SIGNATURE-----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=YAfp
-----END PGP SIGNATURE-----
Merge tag 'for-6.8/block-2024-01-08' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
"Pretty quiet round this time around. This contains:
- NVMe updates via Keith:
- nvme fabrics spec updates (Guixin, Max)
- nvme target udpates (Guixin, Evan)
- nvme attribute refactoring (Daniel)
- nvme-fc numa fix (Keith)
- MD updates via Song:
- Fix/Cleanup RCU usage from conf->disks[i].rdev (Yu Kuai)
- Fix raid5 hang issue (Junxiao Bi)
- Add Yu Kuai as Reviewer of the md subsystem
- Remove deprecated flavors (Song Liu)
- raid1 read error check support (Li Nan)
- Better handle events off-by-1 case (Alex Lyakas)
- Efficiency improvements for passthrough (Kundan)
- Support for mapping integrity data directly (Keith)
- Zoned write fix (Damien)
- rnbd fixes (Kees, Santosh, Supriti)
- Default to a sane discard size granularity (Christoph)
- Make the default max transfer size naming less confusing
(Christoph)
- Remove support for deprecated host aware zoned model (Christoph)
- Misc fixes (me, Li, Matthew, Min, Ming, Randy, liyouhong, Daniel,
Bart, Christoph)"
* tag 'for-6.8/block-2024-01-08' of git://git.kernel.dk/linux: (78 commits)
block: Treat sequential write preferred zone type as invalid
block: remove disk_clear_zoned
sd: remove the !ZBC && blk_queue_is_zoned case in sd_read_block_characteristics
drivers/block/xen-blkback/common.h: Fix spelling typo in comment
blk-cgroup: fix rcu lockdep warning in blkg_lookup()
blk-cgroup: don't use removal safe list iterators
block: floor the discard granularity to the physical block size
mtd_blkdevs: use the default discard granularity
bcache: use the default discard granularity
zram: use the default discard granularity
null_blk: use the default discard granularity
nbd: use the default discard granularity
ubd: use the default discard granularity
block: default the discard granularity to sector size
bcache: discard_granularity should not be smaller than a sector
block: remove two comments in bio_split_discard
block: rename and document BLK_DEF_MAX_SECTORS
loop: don't abuse BLK_DEF_MAX_SECTORS
aoe: don't abuse BLK_DEF_MAX_SECTORS
null_blk: don't cap max_hw_sectors to BLK_DEF_MAX_SECTORS
...
Commit cf1b6d4441 ("md: simplify md_seq_ops") introduce following
regressions:
1) If list all_mddevs is emptly, personalities and unused devices won't
be showed to user anymore.
2) If seq_file buffer overflowed from md_seq_show(), then md_seq_start()
will be called again, hence personalities will be showed to user
again.
3) If seq_file buffer overflowed from md_seq_stop(), seq_read_iter()
doesn't handle this, hence unused devices won't be showed to user.
Fix above problems by printing personalities and unused devices in
md_seq_show().
Fixes: cf1b6d4441 ("md: simplify md_seq_ops")
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240109133957.2975272-1-yukuai1@huaweicloud.com
md-multipath has been marked as deprecated for 2.5 years. Remove it.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Neil Brown <neilb@suse.de>
Cc: Guoqing Jiang <guoqing.jiang@linux.dev>
Cc: Mateusz Grzonka <mateusz.grzonka@intel.com>
Cc: Jes Sorensen <jes@trained-monkey.org>
Signed-off-by: Song Liu <song@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20231214222107.2016042-3-song@kernel.org
md-linear has been marked as deprecated for 2.5 years. Remove it.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Neil Brown <neilb@suse.de>
Cc: Guoqing Jiang <guoqing.jiang@linux.dev>
Cc: Mateusz Grzonka <mateusz.grzonka@intel.com>
Cc: Jes Sorensen <jes@trained-monkey.org>
Signed-off-by: Song Liu <song@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20231214222107.2016042-2-song@kernel.org
After commit db5e653d7c ("md: delay choosing sync action to
md_start_sync()"), md_start_sync() will hold 'reconfig_mutex', however,
in order to make sure event_work is done, __md_stop() will flush
workqueue with reconfig_mutex grabbed, hence if sync_work is still
pending, deadlock will be triggered.
Fortunately, former pacthes to fix stopping sync_thread already make sure
all sync_work is done already, hence such deadlock is not possible
anymore. However, in order not to cause confusions for people by this
implicit dependency, delay flushing event_work to dm-raid where
'reconfig_mutex' is not held, and add some comments to emphasize that
the workqueue can't be flushed with 'reconfig_mutex'.
Fixes: db5e653d7c ("md: delay choosing sync action to md_start_sync()")
Depends-on: f52f5c71f3 ("md: fix stopping sync thread")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Upon assembling the array, both kernel and mdadm allow the devices to have event
counter difference of 1, and still consider them as up-to-date.
However, a device whose event count is behind by 1, may in fact not be up-to-date,
and array resync with such a device may cause data corruption.
To avoid this, consult the superblock of the freshest device about the status
of a device, whose event counter is behind by 1.
Signed-off-by: Alex Lyakas <alex.lyakas@zadara.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/1702470271-16073-1-git-send-email-alex.lyakas@zadara.com
New mddev_resume() calls are added to synchronize IO with array
reconfiguration, however, this introduces a performance regression while
adding it in md_start_sync():
1) someone sets MD_RECOVERY_NEEDED first;
2) daemon thread grabs reconfig_mutex, then clears MD_RECOVERY_NEEDED and
queues a new sync work;
3) daemon thread releases reconfig_mutex;
4) in md_start_sync
a) check that there are spares that can be added/removed, then suspend
the array;
b) remove_and_add_spares may not be called, or called without really
add/remove spares;
c) resume the array, then set MD_RECOVERY_NEEDED again!
Loop between 2 - 4, then mddev_suspend() will be called quite often, for
consequence, normal IO will be quite slow.
Fix this problem by don't set MD_RECOVERY_NEEDED again in md_start_sync(),
hence the loop will be broken.
Fixes: bc08041b32 ("md: suspend array in md_start_sync() if array need reconfiguration")
Suggested-by: Song Liu <song@kernel.org>
Reported-by: Janpieter Sollie <janpieter.sollie@edpnet.be>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218200
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20231207020724.2797445-1-yukuai1@huaweicloud.com
Currently sync thread is stopped from multiple contex:
- idle_sync_thread
- frozen_sync_thread
- __md_stop_writes
- md_set_readonly
- do_md_stop
And there are some problems:
1) sync_work is flushed while reconfig_mutex is grabbed, this can
deadlock because the work function will grab reconfig_mutex as well.
2) md_reap_sync_thread() can't be called directly while md_do_sync() is
not finished yet, for example, commit 130443d60b ("md: refactor
idle/frozen_sync_thread() to fix deadlock").
3) If MD_RECOVERY_RUNNING is not set, there is no need to stop
sync_thread at all because sync_thread must not be registered.
Factor out a helper stop_sync_thread(), so that above contex will behave
the same. Fix 1) by flushing sync_work after reconfig_mutex is released,
before waiting for sync_thread to be done; Fix 2) bt letting daemon thread
to unregister sync_thread; Fix 3) by always checking MD_RECOVERY_RUNNING
first.
Fixes: db5e653d7c ("md: delay choosing sync action to md_start_sync()")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20231205094215.1824240-4-yukuai1@huaweicloud.com
If md_set_readonly() failed, the array could still be read-write, however
'MD_RECOVERY_FROZEN' could still be set, which leave the array in an
abnormal state that sync or recovery can't continue anymore.
Hence make sure the flag is cleared after md_set_readonly() returns.
Fixes: 88724bfa68 ("md: wait for pending superblock updates before switching to read-only")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20231205094215.1824240-3-yukuai1@huaweicloud.com
Commit ac61978196 ("md: use separate work_struct for md_start_sync()")
use a new sync_work to replace del_work, however, stop_sync_thread() and
__md_stop_writes() was trying to wait for sync_thread to be done, hence
they should switch to use sync_work as well.
Noted that md_start_sync() from sync_work will grab 'reconfig_mutex',
hence other contex can't held the same lock to flush work, and this will
be fixed in later patches.
Fixes: ac61978196 ("md: use separate work_struct for md_start_sync()")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Xiao Ni <xni@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20231205094215.1824240-2-yukuai1@huaweicloud.com
Currently rcu is used to protect iterating rdev from submit_flushes():
submit_flushes remove_and_add_spares
synchronize_rcu
pers->hot_remove_disk()
rcu_read_lock()
rdev_for_each_rcu
if (rdev->raid_disk >= 0)
rdev->radi_disk = -1;
atomic_inc(&rdev->nr_pending)
rcu_read_unlock()
bi = bio_alloc_bioset()
bi->bi_end_io = md_end_flush
bi->private = rdev
submit_bio
// issue io for removed rdev
Fix this problem by grabbing 'acive_io' before iterating rdev, make sure
that remove_and_add_spares() won't concurrent with submit_flushes().
Fixes: a2826aa92e ("md: support barrier requests on all personalities.")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20231129020234.1586910-1-yukuai1@huaweicloud.com
rcu is not used correctly here, because synchronize_rcu() is called
before replacing old value, for example:
remove_and_add_spares // other path
synchronize_rcu
// called before replacing old value
set_bit(RemoveSynchronized)
rcu_read_lock()
rdev = conf->mirros[].rdev
pers->hot_remove_disk
conf->mirros[].rdev = NULL;
if (!test_bit(RemoveSynchronized))
synchronize_rcu
/*
* won't be called, and won't wait
* for concurrent readers to be done.
*/
// access rdev after remove_and_add_spares()
rcu_read_unlock()
Fortunately, there is a separate rcu protection to prevent such rdev
to be freed:
md_kick_rdev_from_array //other path
rcu_read_lock()
rdev = conf->mirros[].rdev
list_del_rcu(&rdev->same_set)
rcu_read_unlock()
/*
* rdev can be removed from conf, but
* rdev won't be freed.
*/
synchronize_rcu()
free rdev
Hence remove this useless flag and prepare to remove rcu protection to
access rdev from 'conf'.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20231125081604.3939938-2-yukuai1@huaweicloud.com
commit 5e2cf333b7 ("md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d")
introduced a hung bug and will be reverted in next patch, since the issue
that commit is fixing is due to md superblock write is throttled by wbt,
to fix it, we can have superblock write bypass block layer throttle.
Fixes: 5e2cf333b7 ("md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d")
Cc: stable@vger.kernel.org # v5.19+
Suggested-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20231108182216.73611-1-junxiao.bi@oracle.com
md_end_clone_io() may overwrite error status in orig_bio->bi_status with
BLK_STS_OK. This could happen when orig_bio has BIO_CHAIN (split by
md_submit_bio => bio_split_to_limits, for example). As a result, upper
layer may miss error reported from md (or the device) and consider the
failed IO was successful.
Fix this by only update orig_bio->bi_status when current bio reports
error and orig_bio is BLK_STS_OK. This is the same behavior as
__bio_chain_endio().
Fixes: 10764815ff ("md: add io accounting for raid0 and raid5")
Cc: stable@vger.kernel.org # v5.14+
Reported-by: Bhanu Victor DiCara <00bvd0+linux@gmail.com>
Closes: https://lore.kernel.org/regressions/5727380.DvuYhMxLoT@bvd0/
Signed-off-by: Song Liu <song@kernel.org>
Tested-by: Xiao Ni <xni@redhat.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Guoqing Jiang <guoqing.jiang@linux.dev>
