Commit Graph

1024291 Commits

Author SHA1 Message Date
Linus Torvalds
bd31b9efbf SCSI misc on 20210702
This series consists of the usual driver updates (ufs, ibmvfc,
 megaraid_sas, lpfc, elx, mpi3mr, qedi, iscsi, storvsc, mpt3sas) with
 elx and mpi3mr being new drivers.  The major core change is a rework
 to drop the status byte handling macros and the old bit shifted
 definitions and the rest of the updates are minor fixes.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYN7I6iYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishXpRAQCkngYZ
 35yQrqOxgOk2pfrysE95tHrV1MfJm2U49NFTwAEAuZutEvBUTfBF+sbcJ06r6q7i
 H0hkJN/Io7enFs5v3WA=
 =zwIa
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This series consists of the usual driver updates (ufs, ibmvfc,
  megaraid_sas, lpfc, elx, mpi3mr, qedi, iscsi, storvsc, mpt3sas) with
  elx and mpi3mr being new drivers.

  The major core change is a rework to drop the status byte handling
  macros and the old bit shifted definitions and the rest of the updates
  are minor fixes"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (287 commits)
  scsi: aha1740: Avoid over-read of sense buffer
  scsi: arcmsr: Avoid over-read of sense buffer
  scsi: ips: Avoid over-read of sense buffer
  scsi: ufs: ufs-mediatek: Add missing of_node_put() in ufs_mtk_probe()
  scsi: elx: libefc: Fix IRQ restore in efc_domain_dispatch_frame()
  scsi: elx: libefc: Fix less than zero comparison of a unsigned int
  scsi: elx: efct: Fix pointer error checking in debugfs init
  scsi: elx: efct: Fix is_originator return code type
  scsi: elx: efct: Fix link error for _bad_cmpxchg
  scsi: elx: efct: Eliminate unnecessary boolean check in efct_hw_command_cancel()
  scsi: elx: efct: Do not use id uninitialized in efct_lio_setup_session()
  scsi: elx: efct: Fix error handling in efct_hw_init()
  scsi: elx: efct: Remove redundant initialization of variable lun
  scsi: elx: efct: Fix spelling mistake "Unexected" -> "Unexpected"
  scsi: lpfc: Fix build error in lpfc_scsi.c
  scsi: target: iscsi: Remove redundant continue statement
  scsi: qla4xxx: Remove redundant continue statement
  scsi: ppa: Switch to use module_parport_driver()
  scsi: imm: Switch to use module_parport_driver()
  scsi: mpt3sas: Fix error return value in _scsih_expander_add()
  ...
2021-07-02 15:14:36 -07:00
Linus Torvalds
9f7b640f00 New code for 5.14:
- Refactor the buffer cache to use bulk page allocation
 - Convert agnumber-based AG iteration to walk per-AG structures
 - Clean up some unit conversions and other code warts
 - Reduce spinlock contention in the directio fastpath
 - Collapse all the inode cache walks into a single function
 - Remove indirect function calls from the inode cache walk code
 - Dramatically reduce the number of cache flushes sent when writing log
   buffers
 - Preserve inode sickness reports for longer
 - Rename xfs_eofblocks since it controls inode cache walks
 - Refactor the extended attribute code to prepare it for the addition
   of log intent items to make xattrs fully transactional
 - A few fixes to earlier large patchsets
 - Log recovery fixes so that we don't accidentally mark the log clean
   when log intent recovery fails
 - Fix some latent SOB errors
 - Clean up shutdown messages that get logged to dmesg
 - Fix a regression in the online shrink code
 - Fix a UAF in the buffer logging code if the fs goes offline
 - Fix uninitialized error variables
 - Fix a UAF in the CIL when commited log item callbacks race with a
   shutdown
 - Fix a bug where the CIL could hang trying to push part of the log ring
   buffer that hasn't been filled yet
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEUzaAxoMeQq6m2jMV+H93GTRKtOsFAmDXP38ACgkQ+H93GTRK
 tOsKzw//eHvEgeyBo7ek06GDsUph2kQVR9AJWE7MNMiBFxlmL8R9H225xJK7Qmcr
 YswcyEeDq8cNXbXDA249ueuMb+DxhZPY68hPK5BJ3KsbvL2RZV0lJCbk492l4cgb
 IvBJiG/MDo55km83tdr81AlmFYQM7rSQz5MbVogGxxsnp0ul3VpIrJZba8kPRDQ1
 mZzH2fdlnE9Ozw/CfvjSgT1pySyFpxNeTRucYXUQil1hL1AGTBw7rGGNnccS090y
 u/EawQ4WJ131m8O3+WomUmaGyZFlWvTpHzukKxvrEvZ6AG+HpIhMcbZ5J6nkRTY4
 xxhUBG2qNKIcgPmPwAGmx1cylcsOCNKQgp+fko9tAZjEkgT5cbCpqpjGgjNB0RCf
 pB0PY6idCFl9hmBpVgMWz2AZ9IsDmK54qufmLtzq/zN8cThzt6A95UUR0rGu5Kd8
 CUmmdQTYl0GqlTTszCO2rw1+zRtcasMpBVmeYHDxy00bd1dHLUJ6o8DuXRYTTQti
 J/6CZVVD56jieRb+uvrOq4mhiPR2kynciiu1dXdY5kx79kKom6HMBBvtTl8b9kmh
 smWihfip7BTpz5vFzcwFmMxFwzW3K4LnDZl7qEGqXDEIHOL+pRWazU2yN3JZRGyd
 z4SQMJuER0HTTA0yO09c3/CX9onorhjUIMgQ9U25l1hdyFna0+o=
 =08Q9
 -----END PGP SIGNATURE-----

Merge tag 'xfs-5.14-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux

Pull xfs updates from Darrick Wong:
 "Most of the work this cycle has been on refactoring various parts of
  the codebase. The biggest non-cleanup changes are (1) reducing the
  number of cache flushes sent when writing the log; (2) a substantial
  number of log recovery fixes; and (3) I started accepting pull
  requests from contributors if the commits in their branches match
  what's been sent to the list.

  For a week or so I /had/ staged a major cleanup of the logging code
  from Dave Chinner, but it exposed so many lurking bugs in other parts
  of the logging and log recovery code that I decided to defer that
  patchset until we can address those latent bugs.

  Larger cleanups this time include walking the incore inode cache (me)
  and rework of the extended attribute code (Allison) to prepare it for
  adding logged xattr updates (and directory tree parent pointers) in
  future releases.

  Summary:

   - Refactor the buffer cache to use bulk page allocation

   - Convert agnumber-based AG iteration to walk per-AG structures

   - Clean up some unit conversions and other code warts

   - Reduce spinlock contention in the directio fastpath

   - Collapse all the inode cache walks into a single function

   - Remove indirect function calls from the inode cache walk code

   - Dramatically reduce the number of cache flushes sent when writing
     log buffers

   - Preserve inode sickness reports for longer

   - Rename xfs_eofblocks since it controls inode cache walks

   - Refactor the extended attribute code to prepare it for the addition
     of log intent items to make xattrs fully transactional

   - A few fixes to earlier large patchsets

   - Log recovery fixes so that we don't accidentally mark the log clean
     when log intent recovery fails

   - Fix some latent SOB errors

   - Clean up shutdown messages that get logged to dmesg

   - Fix a regression in the online shrink code

   - Fix a UAF in the buffer logging code if the fs goes offline

   - Fix uninitialized error variables

   - Fix a UAF in the CIL when commited log item callbacks race with a
     shutdown

   - Fix a bug where the CIL could hang trying to push part of the log
     ring buffer that hasn't been filled yet"

* tag 'xfs-5.14-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (102 commits)
  xfs: don't wait on future iclogs when pushing the CIL
  xfs: Fix a CIL UAF by getting get rid of the iclog callback lock
  xfs: remove callback dequeue loop from xlog_state_do_iclog_callbacks
  xfs: don't nest icloglock inside ic_callback_lock
  xfs: Initialize error in xfs_attr_remove_iter
  xfs: fix endianness issue in xfs_ag_shrink_space
  xfs: remove dead stale buf unpin handling code
  xfs: hold buffer across unpin and potential shutdown processing
  xfs: force the log offline when log intent item recovery fails
  xfs: fix log intent recovery ENOSPC shutdowns when inactivating inodes
  xfs: shorten the shutdown messages to a single line
  xfs: print name of function causing fs shutdown instead of hex pointer
  xfs: fix type mismatches in the inode reclaim functions
  xfs: separate primary inode selection criteria in xfs_iget_cache_hit
  xfs: refactor the inode recycling code
  xfs: add iclog state trace events
  xfs: xfs_log_force_lsn isn't passed a LSN
  xfs: Fix CIL throttle hang when CIL space used going backwards
  xfs: journal IO cache flush reductions
  xfs: remove need_start_rec parameter from xlog_write()
  ...
2021-07-02 14:30:27 -07:00
Linus Torvalds
e4aa67b023 JFS fixes for 5.14
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEIodevzQLVs53l6BhNqiEXrVAjGQFAmDeGXwACgkQNqiEXrVA
 jGTONw/+J9mdqQW4zrrIotoO49wKpPv0Ub/XJqT+cDrae91w/lrOct2g0U12aG/e
 zkVeGDhWF4iqsVhyAPx1U6Dh0/rg3JlCSr3l2NYk7WKGwQSOFINtrXPMUfz1P9h1
 M/Cvz9XIkIzATeEd6yrGdQyw5bcSQu3uF8o71ufdKJfeNkAxlhigw690vePMXPFp
 YSmBgLVM1ntp2apJyJiFYVNJqfbDL2bVWG3a+ENGXjD+b/8IsShTKM6VyEXRWGKa
 M1RjEW7i5kvoPtmbV5tLkySete+Bumv8ZRGoAv306tgABjWRkAZN31EzdZfBe5Io
 8pK5USGaSVauP9E0wXV4irfaAuYPp1uAsZqzhxbRXLtTsLKJKrZKxjq9kZON3FPd
 tGY1v462zBrj79oN++Z7/bDxwbcfJ+OPid2Fev6SlsYfTndTp1cseLDsef574/vo
 1P6DgCHNabHWZcjeI2ubMIM+W3+pAwjWUeeLOedCa7IZ6VKTwx+8RPEDNAxMq7lO
 6fs+NUtbEd/veaTmicJnllvld1HcqS+H/sPSS7tHhTtoMTVG2bdpzyvvxGzKOxq+
 IQNnNOLwg6LsH3z+uenU+fhnm5Z/b+iZsMG3LgXALu6JCDaZf/ygvyQfhhJS5n5r
 MJfWP2ZSpEf3yYcsoKvgFafVXv6p2fnibfB/2ecmyQ6Lz54U6hc=
 =li00
 -----END PGP SIGNATURE-----

Merge tag 'jfs-5.14' of git://github.com/kleikamp/linux-shaggy

Pull jfs updates from David Kleikamp:
 "JFS fixes for 5.14"

* tag 'jfs-5.14' of git://github.com/kleikamp/linux-shaggy:
  jfs: Avoid field-overflowing memcpy()
  jfs: remove unnecessary oom message
  jfs: fix GPF in diFree
  fs/jfs: Fix missing error code in lmLogInit()
  jfs: Remove trailing semicolon in macros
  fs: Fix typo issue
2021-07-02 14:25:17 -07:00
Linus Torvalds
ced4cca754 configfs updates for Linux 5.13
- fix a memleak in configfs_release_bin_file (Chung-Chiang Cheng)
  - implement the .read_iter and .write_iter (Bart Van Assche)
  - minor cleanups (Bart Van Assche, me)
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAmDfOe8LHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYNbuA//dTCwt9U8+XIDeWatRJY2BFSTorNhaeayYiGDDnVo
 7NVN/vw5qtt7UHo7hFBi918gh9IGSIbgyYZIZAV4/qCqnveNMnD/Zuwd8j0FHzu4
 OvmjORj52cpzXiyJ87vJ+fGVjqe9/Vtrzr4IFyhJZQnz+c1L0NOgReAiLJtE+1C/
 8RvecwCvIxZVjw8SRjOZNCd/DFBx6nPbwsh0ZLkAiL6TQkV5erOUmFyoOAiXRQwB
 H+6fcrjGteoXXciGmvRtfIaJEO5o2yE4pXEsoYv2aDBF5dtpq/wti8CV7bWSIXiV
 HI90UrVDO+bK94DKC0JmYFEAxi7HmX073OWu0xBgXjpUnc1kepJ+9DJ74Y43QwwF
 C0eHKu4b/nP/50c/7UxqUSmS23c9YiJawkYZjxbnxklN9QhRs8v61htOO6i9CFnu
 KjePcLs07sn6AEa16taCV/+iwfgyul047jegrZZSTNioBPgpdMX+j2fzt2FTWioJ
 zfVLsiBqvKDKXEkulsTMMFmO4Un2kcX7cTX7v9DclGvpCuEoOpPUDERS5H8+DkqV
 q+O2HPohFdFItcWge58eCvZ0OJ43Px07Mpn6WH48VLCDLTg7H7Z/85yEO6Wg+a6V
 JlgwdoAlHo5BHfS2w7PtkblbaJH9MQRc6dvSuv/sE1x8AouWze7wkfVb0ZH0X1GF
 Xjo=
 =dquw
 -----END PGP SIGNATURE-----

Merge tag 'configfs-5.13' of git://git.infradead.org/users/hch/configfs

Pull configfs updates from Christoph Hellwig:

 - fix a memleak in configfs_release_bin_file (Chung-Chiang Cheng)

 - implement the .read_iter and .write_iter (Bart Van Assche)

 - minor cleanups (Bart Van Assche, me)

* tag 'configfs-5.13' of git://git.infradead.org/users/hch/configfs:
  configfs: simplify configfs_release_bin_file
  configfs: fix memleak in configfs_release_bin_file
  configfs: implement the .read_iter and .write_iter methods
  configfs: drop pointless kerneldoc comments
  configfs: fix the kerneldoc comment for configfs_create_bin_file
2021-07-02 14:13:21 -07:00
Linus Torvalds
e72b069609 dma-mapping updates for Linux 5.14
- a trivivial whitespace fix (Zhen Lei)
  - report -EEXIST errors in add_dma_entry (Hamza Mahfooz)
 -----BEGIN PGP SIGNATURE-----
 
 iQI/BAABCgApFiEEgdbnc3r/njty3Iq9D55TZVIEUYMFAmDfOS4LHGhjaEBsc3Qu
 ZGUACgkQD55TZVIEUYP8sBAAq1qOMdxAsOtfdl4MrUP3/LrxL9FSN6ThMeaZy3QV
 jUgcIEZ8To8KAXoEAu0LzIDhI6xGfAcwzavNviCPzoyT4OPzTOZQvHK4AOotruu0
 qQ/Xa9iSputWNA/eV8eMLRYKRZJv0MB0su4mqn9h/ruxRENm/iBKHj30Q1JrCERQ
 bhbEm1Bnw6BZqjQrhn4hEKq7UVVTUeVOITDXmj4TiYQJPLsr2RFgZa1UzOx1xbvu
 x1HzzRNeBRjri2yIn562eIuIPno+d6NtLDPlCXD46dqd6VUclV0hYy6irooZY0uY
 0gnXo35NKB1DG45he6TIm/LTKMjUh7glGLeNY6Id1ZcZJWOTf3zCSs3Z/BiX0aXK
 ituMdk56FjFK2aXExioUJ3heZ2lrn2WHNMeZ9wNcZ38UPJNo/dfFXXfYbsGp+TGa
 XsS6QbPW2CmaVz6nktM6ra0VaUNWF/dHY2IpAatMnPfGJbrvmeYLoRQZSvkGwB64
 k95Vu+Q8BAydb9cjLqs5EIZLAPGPsVT6bWZWYUPkc74I7Ke8c03r6K81IwAky9mS
 5EtitaDFQPOlUFwI79RLgg4I+xPEMw3u/mmYLP6JH4WhPjHWk7SeOP1p6EBLCQHE
 7OJLVJxmsrG7VLK+YW7N9q7pSokij0ghpNAeYv7CtxA+tiEPuEYx39Td7+btiP6f
 0KQ=
 =QIFu
 -----END PGP SIGNATURE-----

Merge tag 'dma-mapping-5.14' of git://git.infradead.org/users/hch/dma-mapping

Pull dma-mapping updates from Christoph Hellwig:

 - a trivivial whitespace fix (Zhen Lei)

 - report -EEXIST errors in add_dma_entry (Hamza Mahfooz)

* tag 'dma-mapping-5.14' of git://git.infradead.org/users/hch/dma-mapping:
  dma-debug: report -EEXIST errors in add_dma_entry
  dma-mapping: remove a trailing space
2021-07-02 13:31:08 -07:00
Linus Torvalds
cd3eb7efaa IOMMU Updates for Linux v5.14
Including:
 
  - SMMU Updates from Will Deacon:
 
      - SMMUv3: Support stalling faults for platform devices
      - SMMUv3: Decrease defaults sizes for the event and PRI queues
      - SMMUv2: Support for a new '->probe_finalize' hook, needed by Nvidia
      - SMMUv2: Even more Qualcomm compatible strings
      - SMMUv2: Avoid Adreno TTBR1 quirk for DB820C platform
 
  - Intel VT-d updates from Lu Baolu:
 
      - Convert Intel IOMMU to use sva_lib helpers in iommu core
      - ftrace and debugfs supports for page fault handling
      - Support asynchronous nested capabilities
      - Various misc cleanups
 
  - Support for new VIOT ACPI table to make the VirtIO IOMMU:
    available on x86
 
  - Add the amd_iommu=force_enable command line option to
    enable the IOMMU on platforms where they are known to cause
    problems
 
  - Support for version 2 of the Rockchip IOMMU
 
  - Various smaller fixes, cleanups and refactorings
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAmDexqwACgkQK/BELZcB
 GuOy/w//cr331yKDZDF8DSkWxUHYNXitBlW12nShgYselhlREb5mB1vmpOHuWKus
 K++w7tWA19/qMs/p7yPoS+zCEA3xiZjO+OgyjxTzkxfaQD4GMmP7hK+ItRCXiz9E
 6QZXLOqexniydpa+KEg3rewibcrJwgIpz6QHT8FBrMISiEPRUw5oLeytv6rNjPWx
 WyBRNA+TjNvnybFbWp9gTdgWCshygJMv1WlU7ySZcH45Mq4VKxS4Kihe1fTLp38s
 vBqfRuUHhYcuNmExgjBuK3y8dq7hU8XelKjSm2yvp9srGbhD0NFT1Ng7iZQj43bi
 Eh2Ic8O9miBvm/uJ0ug6PGcEUcdfoHf/PIMqLZMRBj79+9RKxNBzWOAkBd2RwH3A
 Wy98WdOsX4+3MB5EKznxnIQMMA5Rtqyy/gLDd5j4xZnL5Ha3j0oQ9WClD+2iMfpV
 v150GXNOKNDNNjlzXulBxNYzUOK8KKxse9OPg8YDevZPEyVNPH2yXZ6xjoe7SYCW
 FGhaHXdCfRxUk9lsQNtb23CNTKl7Qd6JOOJLZqAfpWzQjQu4wB4kfbnv0zEhMAvi
 XxVqijV/XTWyVXe3HkzByHnqQxrn7YKbC/Ql/BMmk8kbwFvpJbFIaTLvRVsBnE2r
 8Edn5Cjuz4CC83YPQ3EBQn85TpAaUNMDRMc1vz5NrQTqJTzYZag=
 =IxNB
 -----END PGP SIGNATURE-----

Merge tag 'iommu-updates-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull iommu updates from Joerg Roedel:

 - SMMU Updates from Will Deacon:

     - SMMUv3:
        - Support stalling faults for platform devices
        - Decrease defaults sizes for the event and PRI queues
     - SMMUv2:
        - Support for a new '->probe_finalize' hook, needed by Nvidia
        - Even more Qualcomm compatible strings
        - Avoid Adreno TTBR1 quirk for DB820C platform

 - Intel VT-d updates from Lu Baolu:

     - Convert Intel IOMMU to use sva_lib helpers in iommu core
     - ftrace and debugfs supports for page fault handling
     - Support asynchronous nested capabilities
     - Various misc cleanups

 - Support for new VIOT ACPI table to make the VirtIO IOMMU
   available on x86

 - Add the amd_iommu=force_enable command line option to enable
   the IOMMU on platforms where they are known to cause problems

 - Support for version 2 of the Rockchip IOMMU

 - Various smaller fixes, cleanups and refactorings

* tag 'iommu-updates-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (66 commits)
  iommu/virtio: Enable x86 support
  iommu/dma: Pass address limit rather than size to iommu_setup_dma_ops()
  ACPI: Add driver for the VIOT table
  ACPI: Move IOMMU setup code out of IORT
  ACPI: arm64: Move DMA setup operations out of IORT
  iommu/vt-d: Fix dereference of pointer info before it is null checked
  iommu: Update "iommu.strict" documentation
  iommu/arm-smmu: Check smmu->impl pointer before dereferencing
  iommu/arm-smmu-v3: Remove unnecessary oom message
  iommu/arm-smmu: Fix arm_smmu_device refcount leak in address translation
  iommu/arm-smmu: Fix arm_smmu_device refcount leak when arm_smmu_rpm_get fails
  iommu/vt-d: Fix linker error on 32-bit
  iommu/vt-d: No need to typecast
  iommu/vt-d: Define counter explicitly as unsigned int
  iommu/vt-d: Remove unnecessary braces
  iommu/vt-d: Removed unused iommu_count in dmar domain
  iommu/vt-d: Use bitfields for DMAR capabilities
  iommu/vt-d: Use DEVICE_ATTR_RO macro
  iommu/vt-d: Fix out-bounds-warning in intel/svm.c
  iommu/vt-d: Add PRQ handling latency sampling
  ...
2021-07-02 13:22:47 -07:00
Linus Torvalds
35e43538af linux-kselftest-next-5.14-rc1
This Kselftest update for Linux 5.14-rc1 consists of fixes to
 existing tests and framework:
 
 -- migrate sgx test to kselftest harness
 -- add new test cases to sgx test
 -- ftrace test fix event-no-pid on 1-core machine
 -- splice test adjust for handler fallback removal
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmDfQGUACgkQCwJExA0N
 Qxw6hw/+OEBEs+eHlDbbxHb9fBEg8kWls0AJKLAD2DEJOt1eARzyVa4J1MUpS6yK
 jJi/k0wKvqhMbdQgEEL3oSVvr9JgmOell0OkLzK9tx4HgEou89GnuO+wVRAeG87o
 QGDVWOa76GZwC47rvDDt9i9io075O1fol9HPgPZIdyVFcFgu45PVmRoSK4vaKUpm
 m5VtEznCxcL60vD+u2XhbBO2QMUi4OoBrNdJpnkBx/U6iCv5ZQbpN3OoDgdhltXC
 raQChLmy9bi2uYXskklcY1xGftyUiiWwfaiz7w6a65C2DedsUoD1lwhnaLlsJmSh
 KTOx9r5xF5bgRsdbWefIc7yRk9nVNczVSRs+x8aGlXT3p+e9jwaSXWXvCaZowYOV
 M+R0nCgmpOoGl5jhgeeu+P+JyC7aRRtMhVTGOiuUzyAPZbaIur1JVjoHpRHCVZle
 XjkCbq+VZ7Qb6pZ5sM+ve20GIw+J8/pDc4qtpttqb+hLtwe5rJj+Ydw2GQ/yZ30c
 uFwfdvGQMVMHjvPaL8IQb6WE3tiBhvJiUYQaRdR83HaWFstI14fFHgm7Zed9I19b
 TAgoDZ4P08cROtTbopbjRX1B3cnx/sUrFjwW8cTstIkedzo3rHbdf4UvV/h96O+S
 BjrZfsbEQBaCLW8KNu9wO/id+sPXeYwuW4HCkE0R0H1ZJI4Fgio=
 =6gOE
 -----END PGP SIGNATURE-----

Merge tag 'linux-kselftest-next-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest update from Shuah Khan:
 "Fixes to existing tests and framework:

   - migrate sgx test to kselftest harness

   - add new test cases to sgx test

   - ftrace test fix event-no-pid on 1-core machine

   - splice test adjust for handler fallback removal"

* tag 'linux-kselftest-next-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/sgx: remove checks for file execute permissions
  selftests/ftrace: fix event-no-pid on 1-core machine
  selftests/sgx: Refine the test enclave to have storage
  selftests/sgx: Add EXPECT_EEXIT() macro
  selftests/sgx: Dump enclave memory map
  selftests/sgx: Migrate to kselftest harness
  selftests/sgx: Rename 'eenter' and 'sgx_call_vdso'
  selftests: timers: rtcpie: skip test if default RTC device does not exist
  selftests: lib.mk: Also install "config" and "settings"
  selftests: splice: Adjust for handler fallback removal
  selftests/tls: Add {} to avoid static checker warning
  selftests/resctrl: Fix incorrect parsing of option "-t"
2021-07-02 13:09:15 -07:00
Linus Torvalds
a48ad6e7a3 linux-kselftest-kunit-fixes-5.14-rc1
This KUnit update for Linux 5.14-rc1 consists of fixes and features:
 
 -- add support for skipped tests
 -- introduce kunit_kmalloc_array/kunit_kcalloc() helpers
 -- add gnu_printf specifiers
 -- add kunit_shutdown
 -- add unit test for filtering suites by names
 -- convert lib/test_list_sort.c to use KUnit
 -- code organization moving default config to tools/testing/kunit
 -- refactor of internal parser input handling
 -- cleanups and updates to documentation
 -- code cleanup related to casts
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmDfNHgACgkQCwJExA0N
 QxzU5g/+ORbcbE5jhumo82xYUCGTScgIqPllNO000Vk9xydMqwx6tpY5puV0ig2z
 5X7pxKEQTnype58yzY5mS1p336ryIx3q+AwEownxTW3YurXo2naQ59ZPjEvlAV+E
 h+DMYLzEjrxzcyJATw02uC9YLUZ3w6FPJfiXViIv93YYrtcnM0u6JpwG0yfBlI4v
 4KKB2Xu4K7T90C9/ADFYFKX3mjXQl5fQwvIdtA7wS90Cgq52LKp2mvg1XEiZE5d+
 0dkTZ4Zo8TxxHt665o7vfnUjQQNmh45iGlW65wONxfAPb8BPoneGjVKWQTnN0Hor
 W+93ZPbMuFMSSKJuoHY9U7sP5VySKvaiIYaGdi6prnZZu0zUabKnLZ6FOy7kEdfs
 v09ulCBTVLslixVgNcp/kD9T+G/SXwCF5YBMAiMDQ0GNfUqlFtBkEA3gd44KwMI0
 KwCcOgUSiaCkqyzOz/VeQsu/nhA5jdMO0KjiAs7Z3e7r7O/qKFs/ll7hZgDNCWSC
 q8eIrcBkSL0EGgXR1iZ4AtGm8op6KKd4ACBM8NdtTyoGFl1npZOgZnHoIsy35G9K
 9mhc7eXSoaDGqy9dONL1Tc8Neg7qLTXQNp2radqsnAAgNPUrJuC7+8YC+DdIsjBH
 W7OyMjpfbwPws5rP4CS+JdwL+nQprKXZvFIhWGYhkDK44MbOngw=
 =5QAv
 -----END PGP SIGNATURE-----

Merge tag 'linux-kselftest-kunit-fixes-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull KUnit update from Shuah Khan:
 "Fixes and features:

   - add support for skipped tests

   - introduce kunit_kmalloc_array/kunit_kcalloc() helpers

   - add gnu_printf specifiers

   - add kunit_shutdown

   - add unit test for filtering suites by names

   - convert lib/test_list_sort.c to use KUnit

   - code organization moving default config to tools/testing/kunit

   - refactor of internal parser input handling

   - cleanups and updates to documentation

   - code cleanup related to casts"

* tag 'linux-kselftest-kunit-fixes-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (29 commits)
  kunit: add unit test for filtering suites by names
  kasan: test: make use of kunit_skip()
  kunit: test: Add example tests which are always skipped
  kunit: tool: Support skipped tests in kunit_tool
  kunit: Support skipped tests
  thunderbolt: test: Reinstate a few casts of bitfields
  kunit: tool: internal refactor of parser input handling
  lib/test: convert lib/test_list_sort.c to use KUnit
  kunit: introduce kunit_kmalloc_array/kunit_kcalloc() helpers
  kunit: Remove the unused all_tests.config
  kunit: Move default config from arch/um -> tools/testing/kunit
  kunit: arch/um/configs: Enable KUNIT_ALL_TESTS by default
  kunit: Add gnu_printf specifiers
  lib/cmdline_kunit: Remove a cast which are no-longer required
  kernel/sysctl-test: Remove some casts which are no-longer required
  thunderbolt: test: Remove some casts which are no longer required
  mmc: sdhci-of-aspeed: Remove some unnecessary casts from KUnit tests
  iio: Remove a cast in iio-test-format which is no longer required
  device property: Remove some casts in property-entry-test
  Documentation: kunit: Clean up some string casts in examples
  ...
2021-07-02 12:58:26 -07:00
Linus Torvalds
019b3fd94b powerpc updates for 5.14
- A big series refactoring parts of our KVM code, and converting some to C.
 
  - Support for ARCH_HAS_SET_MEMORY, and ARCH_HAS_STRICT_MODULE_RWX on some CPUs.
 
  - Support for the Microwatt soft-core.
 
  - Optimisations to our interrupt return path on 64-bit.
 
  - Support for userspace access to the NX GZIP accelerator on PowerVM on Power10.
 
  - Enable KUAP and KUEP by default on 32-bit Book3S CPUs.
 
  - Other smaller features, fixes & cleanups.
 
 Thanks to: Andy Shevchenko, Aneesh Kumar K.V, Arnd Bergmann, Athira Rajeev, Baokun Li,
 Benjamin Herrenschmidt, Bharata B Rao, Christophe Leroy, Daniel Axtens, Daniel Henrique
 Barboza, Finn Thain, Geoff Levand, Haren Myneni, Jason Wang, Jiapeng Chong, Joel Stanley,
 Jordan Niethe, Kajol Jain, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas
 Piggin, Nick Desaulniers, Paul Mackerras, Russell Currey, Sathvika Vasireddy, Shaokun
 Zhang, Stephen Rothwell, Sudeep Holla, Suraj Jitindar Singh, Tom Rix, Vaibhav Jain,
 YueHaibing, Zhang Jianhua, Zhen Lei.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAmDfFS4THG1wZUBlbGxl
 cm1hbi5pZC5hdQAKCRBR6+o8yOGlgFxHEAC88NJ+Gz87LiTQFt6QjhziBaJUd+sY
 uqADPRROr4P50O8PjYZbMi2qbXzOlLkZO4wJWX7jpZ1F9KmbPNqY2shD8h4ahyge
 F/uqzBW1FXBJfnDEKdU2MzalkeTP+dwxLZyouUamjDCGNLFjOV4x/Fft5otOdXjO
 k9uO6yoGyOkWYzjC+Y/irNPlIDDByB/+bD92Cb52Y2mXMDDEnx4JzbtkeJW+8udT
 Sjn3bWzeL+dz5GehjMKwK4+SptNiyQGOgM8FwtnKUMvgzxv04DqCGjr9YC12L2Z7
 VoFZc4GzVgtf8DZg4fJ3KG5aG2nH3Tui7jc9lUckdrxixDAZw5wSG7CQ39gFb/5+
 7A4fEJk4Z3h5llibwxAZrC7wV8ZDDXn8oRFzRcOJjfxYaD+ohOOyWHIebwkdiXYx
 nfYI7sBcScDLXeBvHtDra2GJpbFSpVL3S/QNhhi1vKVNrFSyAgbAybcVL2xPLZ6+
 8Mh7A8xt+hf2bo9AXuYJDo9mwXWfg1093d0kT+AslcRhZioBk18c2AiZLIz0FzuL
 Ua/e5FPb99x9LSdcZHvaAXBoHT2iTgDyCyDa3gkIesyuRX6ggHoFcVQuvdDcbJ9d
 H8LK+Tahy1Y+E5b6KdtU8mDEGE+QG+CWLnwQ6YSCaL/MYgaFzNa32Jdj1fmztSBC
 cttP43kHZ7ljTw==
 =zo4d
 -----END PGP SIGNATURE-----

Merge tag 'powerpc-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux

Pull powerpc updates from Michael Ellerman:

 - A big series refactoring parts of our KVM code, and converting some
   to C.

 - Support for ARCH_HAS_SET_MEMORY, and ARCH_HAS_STRICT_MODULE_RWX on
   some CPUs.

 - Support for the Microwatt soft-core.

 - Optimisations to our interrupt return path on 64-bit.

 - Support for userspace access to the NX GZIP accelerator on PowerVM on
   Power10.

 - Enable KUAP and KUEP by default on 32-bit Book3S CPUs.

 - Other smaller features, fixes & cleanups.

Thanks to: Andy Shevchenko, Aneesh Kumar K.V, Arnd Bergmann, Athira
Rajeev, Baokun Li, Benjamin Herrenschmidt, Bharata B Rao, Christophe
Leroy, Daniel Axtens, Daniel Henrique Barboza, Finn Thain, Geoff Levand,
Haren Myneni, Jason Wang, Jiapeng Chong, Joel Stanley, Jordan Niethe,
Kajol Jain, Nathan Chancellor, Nathan Lynch, Naveen N. Rao, Nicholas
Piggin, Nick Desaulniers, Paul Mackerras, Russell Currey, Sathvika
Vasireddy, Shaokun Zhang, Stephen Rothwell, Sudeep Holla, Suraj Jitindar
Singh, Tom Rix, Vaibhav Jain, YueHaibing, Zhang Jianhua, and Zhen Lei.

* tag 'powerpc-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (218 commits)
  powerpc: Only build restart_table.c for 64s
  powerpc/64s: move ret_from_fork etc above __end_soft_masked
  powerpc/64s/interrupt: clean up interrupt return labels
  powerpc/64/interrupt: add missing kprobe annotations on interrupt exit symbols
  powerpc/64: enable MSR[EE] in irq replay pt_regs
  powerpc/64s/interrupt: preserve regs->softe for NMI interrupts
  powerpc/64s: add a table of implicit soft-masked addresses
  powerpc/64e: remove implicit soft-masking and interrupt exit restart logic
  powerpc/64e: fix CONFIG_RELOCATABLE build warnings
  powerpc/64s: fix hash page fault interrupt handler
  powerpc/4xx: Fix setup_kuep() on SMP
  powerpc/32s: Fix setup_{kuap/kuep}() on SMP
  powerpc/interrupt: Use names in check_return_regs_valid()
  powerpc/interrupt: Also use exit_must_hard_disable() on PPC32
  powerpc/sysfs: Replace sizeof(arr)/sizeof(arr[0]) with ARRAY_SIZE
  powerpc/ptrace: Refactor regs_set_return_{msr/ip}
  powerpc/ptrace: Move set_return_regs_changed() before regs_set_return_{msr/ip}
  powerpc/stacktrace: Fix spurious "stale" traces in raise_backtrace_ipi()
  powerpc/pseries/vas: Include irqdomain.h
  powerpc: mark local variables around longjmp as volatile
  ...
2021-07-02 12:54:34 -07:00
Linus Torvalds
4cad671979 asm-generic/unaligned: Unify asm/unaligned.h around struct helper
The get_unaligned()/put_unaligned() helpers are traditionally architecture
 specific, with the two main variants being the "access-ok.h" version
 that assumes unaligned pointer accesses always work on a particular
 architecture, and the "le-struct.h" version that casts the data to a
 byte aligned type before dereferencing, for architectures that cannot
 always do unaligned accesses in hardware.
 
 Based on the discussion linked below, it appears that the access-ok
 version is not realiable on any architecture, but the struct version
 probably has no downsides. This series changes the code to use the
 same implementation on all architectures, addressing the few exceptions
 separately.
 
 Link: https://lore.kernel.org/lkml/75d07691-1e4f-741f-9852-38c0b4f520bc@synopsys.com/
 Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=100363
 Link: https://lore.kernel.org/lkml/20210507220813.365382-14-arnd@kernel.org/
 Link: git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic.git unaligned-rework-v2
 Link: https://lore.kernel.org/lkml/CAHk-=whGObOKruA_bU3aPGZfoDqZM1_9wBkwREp0H0FgR-90uQ@mail.gmail.com/
 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmDfFx4ACgkQmmx57+YA
 GNkqzRAAjdlIr8M+xI2CyT0/A9tswYfLMeWejmYopq3zlxI6RnvPiJJDIdY2I8US
 1npIiDo55w061CnXL9rV65ocL3XmGu1mabOvgM6ATsec+8t4WaXBV9tysxTJ9ea0
 ltLTa2P5DXWALvWiVMTME7hFaf1cW+8Uqt3LmXxDp2l5zasXajCHAH6YokON2PfM
 CsaRhwSxIu8Sbnu/IQGBI9JW5UXsBfKSyUwtM0OwP7jFOuIeZ4WBVA+j6UxONnFC
 wouKmAM/ThoOsaV9aP4EZLIfBx8d4/hfYQjZ958kYXurerruYkJeEqdIRbV0QqTy
 2O6ZrJ6uqPlzfWz9h458me2dt98YEtALHV/3DCWUcBfHmUQtxElyJYEhG0YjVF3H
 5RYtjw8Q2LS/QR5ask1Xn0JfT89rRnLi2migAtsA4Ce70JP4Us6wGobkj4SHlgDt
 P7+eVq2Mkhqw/kmV8N4p+ZS5lpkK0JniDN+ONDhkZqHL/zXG/HQzx9wLV69jlvo2
 ASevKxITdi+bKHWs5ANungkBOnBUQZacq46mVyi4HPDwMAFyWvVYTbFumy9koagQ
 o9NEgX3RsZcxxi7bU1xuFPFMLMlUQT3Nb30+84B4fKe9FmvHC1hizTiCnp7q4bZr
 z6a6AMHke7YLqKZOqzTJGRR3lPoZZDCb775SAd70LQp6XPZXOHs=
 =IY5U
 -----END PGP SIGNATURE-----

Merge tag 'asm-generic-unaligned-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull asm/unaligned.h unification from Arnd Bergmann:
 "Unify asm/unaligned.h around struct helper

  The get_unaligned()/put_unaligned() helpers are traditionally
  architecture specific, with the two main variants being the
  "access-ok.h" version that assumes unaligned pointer accesses always
  work on a particular architecture, and the "le-struct.h" version that
  casts the data to a byte aligned type before dereferencing, for
  architectures that cannot always do unaligned accesses in hardware.

  Based on the discussion linked below, it appears that the access-ok
  version is not realiable on any architecture, but the struct version
  probably has no downsides. This series changes the code to use the
  same implementation on all architectures, addressing the few
  exceptions separately"

Link: https://lore.kernel.org/lkml/75d07691-1e4f-741f-9852-38c0b4f520bc@synopsys.com/
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=100363
Link: https://lore.kernel.org/lkml/20210507220813.365382-14-arnd@kernel.org/
Link: git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic.git unaligned-rework-v2
Link: https://lore.kernel.org/lkml/CAHk-=whGObOKruA_bU3aPGZfoDqZM1_9wBkwREp0H0FgR-90uQ@mail.gmail.com/

* tag 'asm-generic-unaligned-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  asm-generic: simplify asm/unaligned.h
  asm-generic: uaccess: 1-byte access is always aligned
  netpoll: avoid put_unaligned() on single character
  mwifiex: re-fix for unaligned accesses
  apparmor: use get_unaligned() only for multi-byte words
  partitions: msdos: fix one-byte get_unaligned()
  asm-generic: unaligned always use struct helpers
  asm-generic: unaligned: remove byteshift helpers
  powerpc: use linux/unaligned/le_struct.h on LE power7
  m68k: select CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS
  sh: remove unaligned access for sh4a
  openrisc: always use unaligned-struct header
  asm-generic: use asm-generic/unaligned.h for most architectures
2021-07-02 12:43:40 -07:00
Linus Torvalds
406254918b perf tools changes for v5.14:
Tools:
 
 - Add cgroup support for 'perf top' (-G).
 
 - Add support for KVM MSRs in 'perf kvm stat'
 
 - Support probes on init functions in 'perf probe', to support the
   bootconfig format.
 
 - Improve error reporting in 'perf probe'.
 
 - No need to synthesize BUILD_ID records in 'perf inject' if the MMAP2
   records have build ids already.
 
 - Allow toggling source code ('s' hotkey) in 'perf annotate' in all
   lines.
 
 - Add itrace options support to 'perf annotate'.
 
 - Support to custom DSO filters for 'perf script'.
 
 Hardware enablement:
 
 - Support the HYBRID_TOPOLOGY and HYBRID_CPU_PMU_CAPS features in the
   perf.data file header.
 
 - Support PMU prefix for mem-load and mem-store events, to support
   hybrid (BIG little) CPUs such as Intel's Alderlake.
 
 - Support hybrid CPUs in 'perf mem' and 'perf c2c'.
 
 Hardware tracing:
 
 - Intel PT now supports tracing KVM guests.
 
 - Timestamp improvements for ARM's Coresight.
 
 Build:
 
 - Add 'make -C tools/perf build-test' entries for libopencsd/CORESIGHT=1
   and libbpf/LIBBPF_DYNAMIC=1.
 
 - Use bison's --file-prefix-map option to avoid storing full paths when
   using O= in the perf build.
 
 Tests:
 
 - Improve the 'perf test' entries for libpfm4 and BPF counters.
 
 Misc:
 
 - Sync msr-index.h, mount.h, kvm headers with the kernel originals.
 
 - Add vendor events and metrics for Intel's Icelake Server & Client.
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYN5WhAAKCRCyPKLppCJ+
 J3b9APwO5iDjSMvVgKT84njXo1EqURMz6nmV3kkjBkaMo0KK2wEAvXysIEgwx1cu
 hakfFw63ztxVQctcWShOzP7jnJOOwwg=
 =PpGz
 -----END PGP SIGNATURE-----

Merge tag 'perf-tools-for-v5.14-2021-07-01' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tool updates from Arnaldo Carvalho de Melo:
 "Tools:

   - Add cgroup support for 'perf top' (-G).

   - Add support for KVM MSRs in 'perf kvm stat'

   - Support probes on init functions in 'perf probe', to support the
     bootconfig format.

   - Improve error reporting in 'perf probe'.

   - No need to synthesize BUILD_ID records in 'perf inject' if the
     MMAP2 records have build ids already.

   - Allow toggling source code ('s' hotkey) in 'perf annotate' in all
     lines.

   - Add itrace options support to 'perf annotate'.

   - Support to custom DSO filters for 'perf script'.

  Hardware enablement:

   - Support the HYBRID_TOPOLOGY and HYBRID_CPU_PMU_CAPS features in the
     perf.data file header.

   - Support PMU prefix for mem-load and mem-store events, to support
     hybrid (BIG little) CPUs such as Intel's Alderlake.

   - Support hybrid CPUs in 'perf mem' and 'perf c2c'.

  Hardware tracing:

   - Intel PT now supports tracing KVM guests.

   - Timestamp improvements for ARM's Coresight.

  Build:

   - Add 'make -C tools/perf build-test' entries for
     libopencsd/CORESIGHT=1 and libbpf/LIBBPF_DYNAMIC=1.

   - Use bison's --file-prefix-map option to avoid storing full paths
     when using O= in the perf build.

  Tests:

   - Improve the 'perf test' entries for libpfm4 and BPF counters.

  Misc:

   - Sync msr-index.h, mount.h, kvm headers with the kernel originals.

   - Add vendor events and metrics for Intel's Icelake Server & Client"

* tag 'perf-tools-for-v5.14-2021-07-01' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (123 commits)
  perf session: Add missing evlist__delete when deleting a session
  perf annotate: Allow 's' on source code lines
  perf dlfilter: Add object_code() to perf_dlfilter_fns
  perf dlfilter: Add attr() to perf_dlfilter_fns
  perf dlfilter: Add srcline() to perf_dlfilter_fns
  perf dlfilter: Add insn() to perf_dlfilter_fns
  perf dlfilter: Add resolve_address() to perf_dlfilter_fns
  perf build: Install perf_dlfilter.h
  perf script: Add option to pass arguments to dlfilters
  perf script: Add option to list dlfilters
  perf script: Add dlfilter__filter_event_early()
  perf script: Add API for filtering via dynamically loaded shared object
  perf llvm: Return -ENOMEM when asprintf() fails
  perf cs-etm: Delay decode of non-timeless data until cs_etm__flush_events()
  tools headers UAPI: Synch KVM's svm.h header with the kernel
  tools kvm headers arm64: Update KVM headers from the kernel sources
  tools headers UAPI: Sync linux/kvm.h with the kernel sources
  tools headers cpufeatures: Sync with the kernel sources
  tools include UAPI: Update linux/mount.h copy
  tools arch x86: Sync the msr-index.h copy with the kernel sources
  ...
2021-07-02 12:24:31 -07:00
Linus Torvalds
71bd934101 Merge branch 'akpm' (patches from Andrew)
Merge more updates from Andrew Morton:
 "190 patches.

  Subsystems affected by this patch series: mm (hugetlb, userfaultfd,
  vmscan, kconfig, proc, z3fold, zbud, ras, mempolicy, memblock,
  migration, thp, nommu, kconfig, madvise, memory-hotplug, zswap,
  zsmalloc, zram, cleanups, kfence, and hmm), procfs, sysctl, misc,
  core-kernel, lib, lz4, checkpatch, init, kprobes, nilfs2, hfs,
  signals, exec, kcov, selftests, compress/decompress, and ipc"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (190 commits)
  ipc/util.c: use binary search for max_idx
  ipc/sem.c: use READ_ONCE()/WRITE_ONCE() for use_global_lock
  ipc: use kmalloc for msg_queue and shmid_kernel
  ipc sem: use kvmalloc for sem_undo allocation
  lib/decompressors: remove set but not used variabled 'level'
  selftests/vm/pkeys: exercise x86 XSAVE init state
  selftests/vm/pkeys: refill shadow register after implicit kernel write
  selftests/vm/pkeys: handle negative sys_pkey_alloc() return code
  selftests/vm/pkeys: fix alloc_random_pkey() to make it really, really random
  kcov: add __no_sanitize_coverage to fix noinstr for all architectures
  exec: remove checks in __register_bimfmt()
  x86: signal: don't do sas_ss_reset() until we are certain that sigframe won't be abandoned
  hfsplus: report create_date to kstat.btime
  hfsplus: remove unnecessary oom message
  nilfs2: remove redundant continue statement in a while-loop
  kprobes: remove duplicated strong free_insn_page in x86 and s390
  init: print out unknown kernel parameters
  checkpatch: do not complain about positive return values starting with EPOLL
  checkpatch: improve the indented label test
  checkpatch: scripts/spdxcheck.py now requires python3
  ...
2021-07-02 12:08:10 -07:00
Linus Torvalds
3dbdb38e28 Merge branch 'for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:

 - cgroup.kill is added which implements atomic killing of the whole
   subtree.

   Down the line, this should be able to replace the multiple userland
   implementations of "keep killing till empty".

 - PSI can now be turned off at boot time to avoid overhead for
   configurations which don't care about PSI.

* 'for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: make per-cgroup pressure stall tracking configurable
  cgroup: Fix kernel-doc
  cgroup: inline cgroup_task_freeze()
  tests/cgroup: test cgroup.kill
  tests/cgroup: move cg_wait_for(), cg_prepare_for_wait()
  tests/cgroup: use cgroup.kill in cg_killall()
  docs/cgroup: add entry for cgroup.kill
  cgroup: introduce cgroup.kill
2021-07-01 17:22:14 -07:00
Linus Torvalds
e267992f9e Merge branch 'for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu
Pull percpu updates from Dennis Zhou:

 - percpu chunk depopulation - depopulate backing pages for chunks with
   empty pages when we exceed a global threshold without those pages.
   This lets us reclaim a portion of memory that would previously be
   lost until the full chunk would be freed (possibly never).

 - memcg accounting cleanup - previously separate chunks were managed
   for normal allocations and __GFP_ACCOUNT allocations. These are now
   consolidated which cleans up the code quite a bit.

 - a few misc clean ups for clang warnings

* 'for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
  percpu: optimize locking in pcpu_balance_workfn()
  percpu: initialize best_upa variable
  percpu: rework memcg accounting
  mm, memcg: introduce mem_cgroup_kmem_disabled()
  mm, memcg: mark cgroup_memory_nosocket, nokmem and noswap as __ro_after_init
  percpu: make symbol 'pcpu_free_slot' static
  percpu: implement partial chunk depopulation
  percpu: use pcpu_free_slot instead of pcpu_nr_slots - 1
  percpu: factor out pcpu_check_block_hint()
  percpu: split __pcpu_balance_workfn()
  percpu: fix a comment about the chunks ordering
2021-07-01 17:17:24 -07:00
Linus Torvalds
19b4385922 - added support for OpeneEmbed SOM9331 board
- Ingenic fixes/improvments
 - other fixes and cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQJOBAABCAA4FiEEbt46xwy6kEcDOXoUeZbBVTGwZHAFAmDdyJQaHHRzYm9nZW5k
 QGFscGhhLmZyYW5rZW4uZGUACgkQeZbBVTGwZHBlyRAAhj5dC1EyGsc0cWyzC8ZU
 Nh45vzMCSxa4mxAelNjuVKdE0h7gLeRa8/sKPV+EcS3ZFcSfZQeIHEbH9Na3EDS7
 KtUZmkjrHCDdRTh7kou7E7mb716HvoQEyq6d1VyZOahyqf2ZcjIsFinK+As+4wBV
 JcXJMcpUWemI4Ojm8cbmNWQW3V2Ty9qLNUa6BpmntbdOdYowTih9QWHv2u1YsOR7
 R6LJXdyo6V1RieeqfZaWXTQtN8yyXYhBewLIy0DxBAm329f5sRHUVd9/ZD2RMByD
 1weEhbs0jhmYZFSfkwZ8SjAb4GkusjNTnDiK4Rsuz6pQK0BIGNAV0Mrnedq+i5eD
 wrrTI1/envStDpj9XGlSNajcaQGpTza1V1uaCIm4EanOMMTBc8DTXaj7MCOlTD8j
 fkNE3ykfloVSSzZAWCmcpV9fBsFwQp3m+cWrtIAAnOJDK+NV5FfABUwFHKnBUpxG
 YOUNCed0WJFx++xrHKylt8hWILLEATLHh1h5vDsEYJi4gwt2KxCSYQBGgSYKa1At
 tOUa5UINTMvpe4U9GEjHh6f1VedtUNYUzXjD5g2cn62d81RCSx3hB1KkfQSKtaDw
 H9sR8d+rDFt4fK9T/HPZ3EyM2i9FkZNv+CulfGNd3M0vnF8+qX2xRehWrqhwBBi0
 2p7V9/t5TPhziAfJySKX+Jg=
 =j2kH
 -----END PGP SIGNATURE-----

Merge tag 'mips_5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS updates from Thomas Bogendoerfer:

 - add support for OpeneEmbed SOM9331 board

 - Ingenic fixes/improvments

 - other fixes and cleanups

* tag 'mips_5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (39 commits)
  MIPS: Fix PKMAP with 32-bit MIPS huge page support
  MIPS: CI20: Add second percpu timer for SMP.
  MIPS: CI20: Reduce clocksource to 750 kHz.
  MIPS: Ingenic: Add MAC syscon nodes for Ingenic SoCs.
  dt-bindings: clock: Add documentation for MAC PHY control bindings.
  MIPS: X1830: Respect cell count of common properties.
  MIPS: set mips32r5 for virt extensions
  MIPS: loongsoon64: Reserve memory below starting pfn to prevent Oops
  MIPS: MT extensions are not available on MIPS32r1
  mips/kvm: Use BUG_ON instead of if condition followed by BUG
  MIPS: OCTEON: octeon-usb: Use devm_platform_get_and_ioremap_resource()
  MIPS: add PMD table accounting into MIPS'pmd_alloc_one
  MIPS: Loongson64: fix spelling of SPDX tag
  MIPS: ingenic: rs90: Add dedicated VRAM memory region
  MIPS: ingenic: gcw0: Set codec to cap-less mode for FM radio
  MIPS: ingenic: jz4780: Fix I2C nodes to match DT doc
  MIPS: ingenic: Select CPU_SUPPORTS_CPUFREQ && MIPS_EXTERNAL_TIMER
  MIPS: Kconfig: ingenic: Ensure MACH_INGENIC_GENERIC selects all SoCs
  MIPS: cpu-probe: Fix FPU detection on Ingenic JZ4760(B)
  MIPS: boot: Support specifying UART port on Ingenic SoCs
  ...
2021-07-01 17:03:11 -07:00
Linus Torvalds
a32b344e6f This is the bulk of pin control changes for the v5.14 kernel:
New drivers:
 
 - Last merge window we created a driver for the Ralink RT2880.
   We are now moving the Ralink SoC pin control drivers out of the MIPS
   architecture code and into the pin control subsystem. This concerns
   RT288X, MT7620, RT305X, RT3883 and MT7621.
 
 - Qualcomm SM6125 SoC pin control driver.
 
 - Qualcomm spmi-gpio support for PM7325.
 
 - Qualcomm spmi-mpp also handles PMI8994 (just a compatible string)
 
 - Mediatek MT8365 SoC pin controller.
 
 - New device HID for the AMD GPIO controller.
 
 Improvements:
 
 - Pin bias config support for a slew of Renesas pin controllers.
 
 - Incremental improvements and non-urgent bug fixes to the Renesas
   SoC drivers.
 
 - Implement irq_set_wake on the AMD pin controller so we can wake
   up from external pin events.
 
 Misc:
 
 - Devicetree bindings for the Apple M1 pin controller, we will probably
   see a proper driver for this soon as well.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAmDeTu0ACgkQQRCzN7AZ
 XXO2Yg/+LHbqYX8V+Ig1ZcY4p5bfbGyyC6QG6g3d/kzzCmsjHFgmDFQoZ+LoRx+p
 FRUSvmiR0VERMZCEepHsZgzns6ezzJfBt4Cu/388d4iYZppaETpQV47TzqY3eP7Q
 4Shu2wIKwd7C3vNrCifub0JOYAAEsqdlHd75g0bqhal9hgH/MgYQSq9F22/TKAFl
 hteFwyw5L4OwKIDUpqDOIcG8thhHYWrQy77/Pp82/TVnmO9gamt863dKBjIg6iF9
 c+pmIWI8K2mBhNO+epGG4VSroUudIBwKV88nwUjKSe+pu0VAU7lit/V0Uh1IhG0s
 FUHHGDeF62Ncn4SOYetlnSlKbQkhJaBDV2sDgQ3xzqvs1P3WEHRWqYIh1egq5iW6
 /KtpSlRLQ/aO+k0iN66pErpAfsGNFAxkqlCSypyJG7ROnb2rADzZ0ftEKQb8RzZb
 nypPupOO5/bFfQHbQtFORDaNu9MUTR5PR04eTPMoApG0nv7zY+kcJ6iJuKE9spLb
 ahoxLstfQ/fKK27yms72E6PqwanuUEzcQv7gjhuHmFEjNrW1ARUqoa5hpdAzhZOX
 20P8SZWkSeUZnqB26YQq+1U9p6wV0064Vp+jYY/wzQpV40dgX9oumiRkxCWCzpjt
 6mw6x9txlrEEu+2WadW8yZd4ewKvWFLEGI+C/83pnI5NF1Dp0Go=
 =Ajcr
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control changes for the v5.14 kernel. Not so
  much going on. No core changes, just drivers.

  The most interesting would be that MIPS Ralink is migrating to pin
  control and we have some bindings but not yet code for the Apple M1
  pin controller.

  New drivers:

   - Last merge window we created a driver for the Ralink RT2880. We are
     now moving the Ralink SoC pin control drivers out of the MIPS
     architecture code and into the pin control subsystem. This concerns
     RT288X, MT7620, RT305X, RT3883 and MT7621.

   - Qualcomm SM6125 SoC pin control driver.

   - Qualcomm spmi-gpio support for PM7325.

   - Qualcomm spmi-mpp also handles PMI8994 (just a compatible string)

   - Mediatek MT8365 SoC pin controller.

   - New device HID for the AMD GPIO controller.

  Improvements:

   - Pin bias config support for a slew of Renesas pin controllers.

   - Incremental improvements and non-urgent bug fixes to the Renesas
     SoC drivers.

   - Implement irq_set_wake on the AMD pin controller so we can wake up
     from external pin events.

  Misc:

   - Devicetree bindings for the Apple M1 pin controller, we will
     probably see a proper driver for this soon as well"

* tag 'pinctrl-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (54 commits)
  pinctrl: ralink: rt305x: add missing include
  pinctrl: stm32: check for IRQ MUX validity during alloc()
  pinctrl: zynqmp: some code cleanups
  drivers: qcom: pinctrl: Add pinctrl driver for sm6125
  dt-bindings: pinctrl: qcom: sm6125: Document SM6125 pinctrl driver
  dt-bindings: pinctrl: mcp23s08: add documentation for reset-gpios
  pinctrl: mcp23s08: Add optional reset GPIO
  pinctrl: mediatek: fix mode encoding
  pinctrl: mcp23s08: Fix missing unlock on error in mcp23s08_irq()
  pinctrl: bcm: Constify static pinmux_ops
  pinctrl: bcm: Constify static pinctrl_ops
  pinctrl: ralink: move RT288X SoC pinmux config into a new 'pinctrl-rt288x.c' file
  pinctrl: ralink: move MT7620 SoC pinmux config into a new 'pinctrl-mt7620.c' file
  pinctrl: ralink: move RT305X SoC pinmux config into a new 'pinctrl-rt305x.c' file
  pinctrl: ralink: move RT3883 SoC pinmux config into a new 'pinctrl-rt3883.c' file
  pinctrl: ralink: move MT7621 SoC pinmux config into a new 'pinctrl-mt7621.c' file
  pinctrl: ralink: move ralink architecture pinmux header into the driver
  pinctrl: single: config: enable the pin's input
  pinctrl: mtk: Fix mt8365 Kconfig dependency
  pinctrl: mcp23s08: fix race condition in irq handler
  ...
2021-07-01 16:57:14 -07:00
Linus Torvalds
e04360a2ea RDMA v5.14 merge window Pull Request
This PR contains a replacement driver for Intel iWarp hardware. This new
 driver supports the old ethernet hardware and also newer chips that can do
 ROCE. Otherwise this contains the typical mix of patches:
 
 - Driver updates and cleanups for bnxt_re, cxgb4, mlx4, and mlx5
 
 - Many static checker driven code clean ups, including a wide refcount_t
   conversion
 
 - Several series for the hns driver, more HIP09 HW capabilities, migration
   to new HW register manipulators, and code cleanups
 
 - Minor fixes and improvements  in srp, rts, and cm
 
 - Improvements throughout for sysfs related code to use DEVICE_ATTR_*,
   make the ib_port sysfs first-class, and overall use sysfs APIs properly
 
 - Intel's new irdma driver replacing i40iw
 
 - rxe general clean ups and Memory Window support
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEfB7FMLh+8QxL+6i3OG33FX4gmxoFAmDcunQACgkQOG33FX4g
 mxqSBA//dsZi/UzpzgU+YqyMFmUp04wd2/iCYzOcCViNPQZCyCARbGaMXI4kMa4s
 8dM5xU76OnCuNSnXHaIwvHC3CdN9GUm08j9eWY7syvAiKtXCjzv7qmCVfBw35UyK
 IXKfXh57toTSSAIfxw8yKc97QgaDSJ2zQ34fXkoE0AvTlfyN6pHQe9ef/Ca0ejS4
 awUGYVG/oilLXrEHcSSAv5UoX6hOUje6jqqRgp5jmZTI3g7SlIPL8mWgXBkHAYmd
 kDX7lBd09CKo2bmR071/kF6xUzvbCg1tmeE6lZze7gE+aKlBkZcvCBe1RAh3sBzK
 ysLfON5GGw5qnkMaY8j5h3sgWvi3qTTEW+jCAmmVi/6z4PF47mvmVVn+/pZc3y2e
 PqH43cunhwS0KuoUJ5Sd48J/UvabrvdbCNZrjCGCpt45EF4VwKxYMh74Bf0ABEQS
 i9eKR/+wyHG6Uv1U37fIXsqa8yUttl9aV/s88s8irn4xhG8ygBLZgeVQNeGUfvdV
 1W0XLEjRmKFezC1FhiPOz7CLIgL3BfSU1V+S7p0Gvb6ijZqyZTfRUaWbaD3KJpRT
 1kwzE4qp6IbJMEqgQH/lq0xBzvzF48FPvBslX5kwlm0phQRrMCwMVIafutpu395q
 ySeStEvsTVfz/JUHL3ZaEJyTRjAvPL0lXLH80XUpgWk9GzsksOM=
 =wyqt
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

Pull rdma updates from Jason Gunthorpe:
 "This contains a replacement driver for Intel iWarp hardware. This new
  driver supports the old ethernet hardware and also newer chips that
  can do ROCE.

  Other than that, this contains the typical mix of patches:

   - Driver updates and cleanups for bnxt_re, cxgb4, mlx4, and mlx5

   - Many static checker driven code clean ups, including a wide
     refcount_t conversion

   - Several series for the hns driver, more HIP09 HW capabilities,
     migration to new HW register manipulators, and code cleanups

   - Minor fixes and improvements in srp, rts, and cm

   - Improvements throughout for sysfs related code to use
     DEVICE_ATTR_*, make the ib_port sysfs first-class, and overall use
     sysfs APIs properly

   - Intel's new irdma driver replacing i40iw

   - rxe general clean ups and Memory Window support"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (211 commits)
  RDMA/core: Always release restrack object
  RDMA/mlx5: Don't access NULL-cleared mpi pointer
  RDMA/irdma: Fix potential overflow expression in irdma_prm_get_pbles
  RDMA/irdma: Check contents of user-space irdma_mem_reg_req object
  RDMA/rxe: Missing unlock on error in get_srq_wqe()
  RDMA/cma: Fix rdma_resolve_route() memory leak
  RDMA/core/sa_query: Remove unused argument
  RDMA/cma: Fix incorrect Packet Lifetime calculation
  RDMA/cma: Protect RMW with qp_mutex
  RDMA/cma: Remove unnecessary INIT->INIT transition
  RDMA/hns: Add window selection field of congestion control
  RDMA/hfi1: Remove use of kmap()
  RDMA/irdma: Remove use of kmap()
  RDMA/bnxt_re: Fix uninitialized struct bit field rsvd1
  IB/isert: Align target max I/O size to initiator size
  RDMA/hns: Fix incorrect vlan enable bit in QPC
  MAINTAINERS: Update Broadcom RDMA maintainers
  RDMA/irdma: Use the queried port attributes
  RDMA/rxe: Fix redundant skb_put_zero
  RDMA/rxe: Fix extra copy in prepare_ack_packet
  ...
2021-07-01 14:54:03 -07:00
Linus Torvalds
514798d365 This round has a diffstat dominated by Qualcomm clk drivers. Honestly though
that's just a bunch of data so the diffstat reflects that. Looking beyond that
 there's just a bunch of updates all around in various clk drivers. Renesas and
 NXP (for i.MX) are two SoC vendors that have a lot of patches in here. Overall
 the driver changes look to be mostly enabling more clks and non-critical fixes
 that we could hold until the next merge window.
 
 I'm especially excited about the series from Arnd that graduates clkdev to be
 the only implementation of clk_get() and clk_put(). That's a good step in the
 right direction to migreate eveerything over to the common clk framework. Now
 we don't have to worry about clkdev specific details, they're just part of the
 clk API now.
 
 Core:
  - clkdev is now the only option, i.e. clk_get()/clk_put() is implemented in
    only one place in the kernel instead of in drivers/clk/clkdev.c and in
    architectures that want their own implementation
 
 New Drivers:
  - Texas Instruments' LMK04832 Ultra Low-Noise JESD204B Compliant Clock
    Jitter Cleaner With Dual Loop PLLs
  - Qualcomm MDM9607 GCC
  - Qualcomm SC8180X display clks
  - Qualcomm SM6125 GCC
  - Qualcomm SM8250 CAMCC (camera)
  - Renesas RZ/G2L SoC
  - Hisilicon hi3559A SoC
 
 Updates:
  - Stop using clock-output-names in ST clk drivers (yay!)
  - Support secure mode of STM32MP1 SoCs
  - Improve clock support for Actions S500 SoC
  - duty cycle setting support on qcom clks
  - Add TI am33xx spread spectrum clock support
  - Use determine_rate() for the Amlogic pll ops instead of round_rate()
  - Restrict Amlogic gp0/1 and audio plls range on g12a/sm1
  - Improve Amlogic axg-audio controller error on deferral
  - Add NNA clocks on Amlogic g12a
  - Reduce memory footprint of Rockchip PLL rate tables
  - A fix for the newly added Rockchip rk3568 clk driver
  - Exported clock for the newly added Rockchip video decoder
  - Remove audio ipg clock from i.MX8MP
  - Remove deprecated legacy clock binding for i.MX SCU clock driver
  - Use common clk-imx8qxp for both i.MX8QXP and i.MX8QM
  - Add multiple clocks to clk-imx8qxp driver (enet, hdmi, lcdif, audio,
    parallel interface)
  - Add dedicated clock ops for i.MX paralel interface
  - Different fixes for clocks controlled by ATF on i.MX SoCs
  - Add A53/A72 frequency scaling support i.MX clk-scu driver
  - Add special case for DCSS clock on suspend for i.MX clk-scu driver
  - Add parent save/restore on suspend/resume to i.MX clk-scu driver
  - Skip runtime PM enablement for CPU clocks in i.MX clk-scu driver
  - Remove the sys1_pll/sys2_pll clock gates for i.MX8MQ and their
    bindings
  - Tegra clk driver no longer deasserts resets on clk_enable as it
    gets in the way of certain power-up sequences
  - Fix compile testing for Tegra clk driver
  - One patch to fix a divider on the Allwinner v3s Audio PLL
  - Add support for CPU core clock boost modes on Renesas R-Car Gen3
  - Add ISPCS (Image Signal Processor) clocks on Renesas R-Car V3U
  - Switch SH/R-Mobile and R-Car "DIV6" clocks to .determine_rate()
    and improve support for multiple parents
  - Switch Renesas RZ/N1 divider clocks to .determine_rate()
  - Add ZA2 (Audio Clock Generator) clock on Renesas R-Car D3
  - Convert ar7 to common clk framework
  - Convert ralink to common clk framework
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmDbu3sRHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSV+OA/9EEV3uuauFsxVm8ySX4T8amHAzE98asEX
 XldxMqBuGNnlqJn3A3LeGISKKafaRMkL/7xqBnTi9ZycDy1WRi2SiAKLTDoJCmi7
 ES32EBCO1O9D5uo4mYFsYgHUaxFmE+4tQbtDCttVt59yZEiiNPz0Lm8tWz5yuDzX
 IwCN8HrNShyL4dykTRUDuUkqrTg9sSqSvdG+XcyI24pgLtBWvJU32wIFfLN+/n9C
 JSyYwzHkajoeuv5kpAJ1IV/tzZgy77xQHunsatJWz1qJ1J2eFADWI2p3NVf88N21
 5Mw5xvikMJZ5Xq8pdZKiyEQOFfcxN/+k7hfc6eq3SDpbkaHPti9CX2rv9Uck6rdh
 Bigixsx9IHbQ+1CJAXZxcAJma/GwzoWW1irqzTQoChYgwlJIyPijFqbuJxqS4P0d
 9sEp0WvbdAEgnktiqs7gphki7Q04y2gUD3LKD6hz5sL0vZ+Dy1DY6olkWJefGrHo
 FDnEGf6gsP3vvvlJt5G2zeZQ/NzMKkfaIGLj/1hTtoLMaxpg282cmPXVUxD+ripW
 /GG/z14RdaHQXeMXduo+MeK5qUsO6LspnYown54IWilOOo1m/rfbun3yAFJaphG1
 ZQB+JDfeH8Cv6AYbNwbEpXyXyj2Rz5fGQjA31+97fCCxykZ+suBQkWqK/lUCmTyf
 ofwokRnKiYY=
 =YnCF
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "This round has a diffstat dominated by Qualcomm clk drivers. Honestly
  though that's just a bunch of data so the diffstat reflects that.
  Looking beyond that there's just a bunch of updates all around in
  various clk drivers. Renesas and NXP (for i.MX) are two SoC vendors
  that have a lot of patches in here.

  Overall the driver changes look to be mostly enabling more clks and
  non-critical fixes that we could hold until the next merge window.

  I'm especially excited about the series from Arnd that graduates
  clkdev to be the only implementation of clk_get() and clk_put().
  That's a good step in the right direction to migreate eveerything over
  to the common clk framework. Now we don't have to worry about clkdev
  specific details, they're just part of the clk API now.

  Core:
   - clkdev is now the only option, i.e. clk_get()/clk_put() is
     implemented in only one place in the kernel instead of in
     drivers/clk/clkdev.c and in architectures that want their own
     implementation

  New Drivers:
   - Texas Instruments' LMK04832 Ultra Low-Noise JESD204B Compliant
     Clock Jitter Cleaner With Dual Loop PLLs
   - Qualcomm MDM9607 GCC
   - Qualcomm SC8180X display clks
   - Qualcomm SM6125 GCC
   - Qualcomm SM8250 CAMCC (camera)
   - Renesas RZ/G2L SoC
   - Hisilicon hi3559A SoC

  Updates:
   - Stop using clock-output-names in ST clk drivers (yay!)
   - Support secure mode of STM32MP1 SoCs
   - Improve clock support for Actions S500 SoC
   - duty cycle setting support on qcom clks
   - Add TI am33xx spread spectrum clock support
   - Use determine_rate() for the Amlogic pll ops instead of
     round_rate()
   - Restrict Amlogic gp0/1 and audio plls range on g12a/sm1
   - Improve Amlogic axg-audio controller error on deferral
   - Add NNA clocks on Amlogic g12a
   - Reduce memory footprint of Rockchip PLL rate tables
   - A fix for the newly added Rockchip rk3568 clk driver
   - Exported clock for the newly added Rockchip video decoder
   - Remove audio ipg clock from i.MX8MP
   - Remove deprecated legacy clock binding for i.MX SCU clock driver
   - Use common clk-imx8qxp for both i.MX8QXP and i.MX8QM
   - Add multiple clocks to clk-imx8qxp driver (enet, hdmi, lcdif,
     audio, parallel interface)
   - Add dedicated clock ops for i.MX paralel interface
   - Different fixes for clocks controlled by ATF on i.MX SoCs
   - Add A53/A72 frequency scaling support i.MX clk-scu driver
   - Add special case for DCSS clock on suspend for i.MX clk-scu driver
   - Add parent save/restore on suspend/resume to i.MX clk-scu driver
   - Skip runtime PM enablement for CPU clocks in i.MX clk-scu driver
   - Remove the sys1_pll/sys2_pll clock gates for i.MX8MQ and their
     bindings
   - Tegra clk driver no longer deasserts resets on clk_enable as it
     gets in the way of certain power-up sequences
   - Fix compile testing for Tegra clk driver
   - One patch to fix a divider on the Allwinner v3s Audio PLL
   - Add support for CPU core clock boost modes on Renesas R-Car Gen3
   - Add ISPCS (Image Signal Processor) clocks on Renesas R-Car V3U
   - Switch SH/R-Mobile and R-Car "DIV6" clocks to .determine_rate() and
     improve support for multiple parents
   - Switch Renesas RZ/N1 divider clocks to .determine_rate()
   - Add ZA2 (Audio Clock Generator) clock on Renesas R-Car D3
   - Convert ar7 to common clk framework
   - Convert ralink to common clk framework"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (161 commits)
  clk: zynqmp: Handle divider specific read only flag
  clk: zynqmp: Use firmware specific mux clock flags
  clk: zynqmp: Use firmware specific divider clock flags
  clk: zynqmp: Use firmware specific common clock flags
  clk: lmk04832: Use of match table
  clk: lmk04832: Depend on SPI
  clk: stm32mp1: new compatible for secure RCC support
  dt-bindings: clock: stm32mp1 new compatible for secure rcc
  dt-bindings: reset: add MCU HOLD BOOT ID for SCMI reset domains on stm32mp15
  dt-bindings: reset: add IDs for SCMI reset domains on stm32mp15
  dt-bindings: clock: add IDs for SCMI clocks on stm32mp15
  reset: stm32mp1: remove stm32mp1 reset
  clk: hisilicon: Add clock driver for hi3559A SoC
  dt-bindings: Document the hi3559a clock bindings
  clk: si5341: Add sysfs properties to allow checking/resetting device faults
  clk: si5341: Add silabs,iovdd-33 property
  clk: si5341: Add silabs,xaxb-ext-clk property
  clk: si5341: Allow different output VDD_SEL values
  clk: si5341: Update initialization magic
  clk: si5341: Check for input clock presence and PLL lock on startup
  ...
2021-07-01 13:26:16 -07:00
Linus Torvalds
e058a84bfd drm pull for 5.14-rc1
core:
 - mark AGP ioctls as legacy
 - disable force probing for non-master clients
 - HDR metadata property helpers
 - HDMI infoframe signal colorimetry support
 - remove drm_device.pdev pointer
 - remove DRM_KMS_FB_HELPER config option
 - remove drm_pci_alloc/free
 - drm_err_*/drm_dbg_* helpers
 - use drm driver names for fbdev
 - leaked DMA handle fix
 - 16bpc fixed point format fourcc
 - add prefetching memcpy for WC
 - Documentation fixes
 
 aperture:
 - add aperture ownership helpers
 
 dp:
 - aux fixes
 - downstream 0 port handling
 - use extended base receiver capability DPCD
 - Rename DP_PSR_SELECTIVE_UPDATE to better mach eDP spec
 - mst: use khz as link rate during init
 - VCPI fixes for StarTech hub
 
 ttm:
 - provide tt_shrink file via debugfs
 - warn about freeing pinned BOs
 - fix swapping error handling
 - move page alignment into BO
 - cleanup ttm_agp_backend
 - add ttm_sys_manager
 - don't override vm_ops
 - ttm_bo_mmap removed
 - make ttm_resource base of all managers
 - remove VM_MIXEDMAP usage
 
 panel:
 - sysfs_emit support
 - simple: runtime PM support
 - simple: power up panel when reading EDID + caching
 
 bridge:
 - MHDP8546: HDCP support + DT bindings
 - MHDP8546: Register DP AUX channel with userspace
 - TI SN65DSI83 + SN65DSI84: add driver
 - Sil8620: Fix module dependencies
 - dw-hdmi: make CEC driver loading optional
 - Ti-sn65dsi86: refclk fixes, subdrivers, runtime pm
 - It66121: Add driver + DT bindings
 - Adv7511: Support I2S IEC958 encoding
 - Anx7625: fix power-on delay
 - Nwi-dsi: Modesetting fixes; Cleanups
 - lt6911: add missing MODULE_DEVICE_TABLE
 - cdns: fix PM reference leak
 
 hyperv:
 - add new DRM driver for HyperV graphics
 
 efifb:
 - non-PCI device handling fixes
 
 i915:
 - refactor IP/device versioning
 - XeLPD Display IP preperation work
 - ADL-P enablement patches
 - DG1 uAPI behind BROKEN
 - disable mmap ioctl for discerte GPUs
 - start enabling HuC loading for Gen12+
 - major GuC backend rework for new platforms
 - initial TTM support for Discrete GPUs
 - locking rework for TTM prep
 - use correct max source link rate for eDP
 - %p4cc format printing
 - GLK display fixes
 - VLV DSI panel power fixes
 - PSR2 disabled for RKL and ADL-S
 - ACPI _DSM invalid access fixed
 - DMC FW path abstraction
 - ADL-S PCI ID update
 - uAPI headers converted to kerneldoc
 - initial LMEM support for DG1
 - x86/gpu: add Jasperlake to gen11 early quirks
 
 amdgpu:
 - Aldebaran updates + initial SR-IOV
 - new GPU: Beige Goby and Yellow Carp support
 - more LTTPR display work
 - Vangogh updates
 - SDMA 5.x GCR fixes
 - PCIe ASPM support
 - Renoir TMZ enablement
 - initial multiple eDP panel support
 - use fdinfo to track devices/process info
 - pin/unpin TTM fixes
 - free resource on fence usage query
 - fix fence calculation
 - fix hotunplug/suspend issues
 - GC/MM register access macro cleanup for SR-IOV
 - W=1 fixes
 - ACPI ATCS/ATIF handling rework
 - 16bpc fixed point format support
 - Initial smartshift support
 - RV/PCO power tuning fixes
 - new INFO query for additional vbios info
 
 amdkfd:
 - SR-IOV aldebaran support
 - HMM SVM support
 
 radeon:
 - SMU regression fixes
 - Oland flickering fix
 
 vmwgfx:
 - enable console with fbdev emulation
 - fix cpu updates of coherent multisample surfaces
 - remove reservation semaphore
 - add initial SVGA3 support
 - support arm64
 
 msm:
 - devcoredump support for display errors
 - dpu/dsi: yaml bindings conversion
 - mdp5: alpha/blend_mode/zpos support
 - a6xx: cached coherent buffer support
 - gpu iova fault improvement
 - a660 support
 
 rockchip:
 - RK3036 win1 scaling support
 - RK3066/3188 missing register support
 - RK3036/3066/3126/3188 alpha support
 
 mediatek:
 - MT8167 HDMI support
 - MT8183 DPI dual edge support
 
 tegra:
 - fixed YUV support/scaling on Tegra186+
 
 ast:
 - use pcim_iomap
 - fix DP501 EDID
 
 bochs:
 - screen blanking support
 
 etnaviv:
 - export more GPU ID values to userspace
 - add HWDB entry for GPU on i.MX8MP
 - rework linear window calcs
 
 exynos:
 - pm runtime changes
 
 imx:
 - Annotate dma_fence critical section
 - fix PRG modifiers after drmm conversion
 - Add 8 pixel alignment fix for 1366x768
 - fix YUV advertising
 - add color properties
 
 ingenic:
 - IPU planes fix
 
 panfrost:
 - Mediatek MT8183 support + DT bindings
 - export AFBC_FEATURES register to userspace
 
 simpledrm:
 - %pr for printing resources
 
 nouveau:
 - pin/unpin TTM fixes
 
 qxl:
 - unpin shadow BO
 
 virtio:
 - create dumb BOs as guest blob
 
 vkms:
 - drmm_universal_plane_alloc
 - add XRGB plane composition
 - overlay support
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmDdQzkACgkQDHTzWXnE
 hr7bhQ//aSYnp1To3tvPtwQ2H88RTnEbUd+nCi3C03QdLAbHC9dYHVdWuNPw2doh
 aiJO2JyQoqXVo95Jc39qkmpvm1lLDNQuufBweCHxbbpl8wYIUjfkIYq+fnZbWPaA
 aRVSOLE/4DIcgJTimsgOssAOK9klk/WYT9EV7CNIBA/b0R6f9iTUoBxCALDvMeVx
 Pt3Rnfsg3+u8msqBkkpkvFLZRS8lkXx6eZ0LEhUfRsfMcKo5L80cOHgvIhrh9+fN
 yBFv+u7jM3fOxyUYEoBeVY8UqTLfbgM+vdiP9pmiGn66yCZVJWIxCe1Mijk6K143
 f4OxJy1jJAGzo/knLCuCb21qbzyImQzkold9V+h8KAvTXGeMPISjbpLbwGeo8rne
 lfTAisGnu8q3xvYAU9znx9DkFQULgUuWahEYY3jX0ApVCR76hiT6H7AR9EOMhvKY
 PD1n39Bf62p7zK5QQ+XUOiX3PGv8J6Hw/wykFy+AIg4YgT/oK+QJul820MjZiYyt
 7Kt09Ibj4JO+vubxqlbJVsW3xtdg/Oz3BRMIdHs+2l/s0pSwBZa+qTcXhPGZxB5B
 HiyHiUgLsK8MQ0aIw9IK8+nJH8M60t6A179BbmVWxhYpGLH2Wvq0Vxgsedt9trHn
 2RN3mHlpXHSaZJbIbPcvuOewBLKA6K94o2ZZ8xqZbDcCjjC60ts=
 =fFet
 -----END PGP SIGNATURE-----

Merge tag 'drm-next-2021-07-01' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Dave Airlie:
 "Highlights:

   - AMD enables two more GPUs, with resulting header files

   - i915 has started to move to TTM for discrete GPU and enable DG1
     discrete GPU support (not by default yet)

   - new HyperV drm driver

   - vmwgfx adds arm64 support

   - TTM refactoring ongoing

   - 16bpc display support for AMD hw

  Otherwise it's just the usual insane amounts of work all over the
  place in lots of drivers and the core, as mostly summarised below:

  Core:
   - mark AGP ioctls as legacy
   - disable force probing for non-master clients
   - HDR metadata property helpers
   - HDMI infoframe signal colorimetry support
   - remove drm_device.pdev pointer
   - remove DRM_KMS_FB_HELPER config option
   - remove drm_pci_alloc/free
   - drm_err_*/drm_dbg_* helpers
   - use drm driver names for fbdev
   - leaked DMA handle fix
   - 16bpc fixed point format fourcc
   - add prefetching memcpy for WC
   - Documentation fixes

  aperture:
   - add aperture ownership helpers

  dp:
   - aux fixes
   - downstream 0 port handling
   - use extended base receiver capability DPCD
   - Rename DP_PSR_SELECTIVE_UPDATE to better mach eDP spec
   - mst: use khz as link rate during init
   - VCPI fixes for StarTech hub

  ttm:
   - provide tt_shrink file via debugfs
   - warn about freeing pinned BOs
   - fix swapping error handling
   - move page alignment into BO
   - cleanup ttm_agp_backend
   - add ttm_sys_manager
   - don't override vm_ops
   - ttm_bo_mmap removed
   - make ttm_resource base of all managers
   - remove VM_MIXEDMAP usage

  panel:
   - sysfs_emit support
   - simple: runtime PM support
   - simple: power up panel when reading EDID + caching

  bridge:
   - MHDP8546: HDCP support + DT bindings
   - MHDP8546: Register DP AUX channel with userspace
   - TI SN65DSI83 + SN65DSI84: add driver
   - Sil8620: Fix module dependencies
   - dw-hdmi: make CEC driver loading optional
   - Ti-sn65dsi86: refclk fixes, subdrivers, runtime pm
   - It66121: Add driver + DT bindings
   - Adv7511: Support I2S IEC958 encoding
   - Anx7625: fix power-on delay
   - Nwi-dsi: Modesetting fixes; Cleanups
   - lt6911: add missing MODULE_DEVICE_TABLE
   - cdns: fix PM reference leak

  hyperv:
   - add new DRM driver for HyperV graphics

  efifb:
   - non-PCI device handling fixes

  i915:
   - refactor IP/device versioning
   - XeLPD Display IP preperation work
   - ADL-P enablement patches
   - DG1 uAPI behind BROKEN
   - disable mmap ioctl for discerte GPUs
   - start enabling HuC loading for Gen12+
   - major GuC backend rework for new platforms
   - initial TTM support for Discrete GPUs
   - locking rework for TTM prep
   - use correct max source link rate for eDP
   - %p4cc format printing
   - GLK display fixes
   - VLV DSI panel power fixes
   - PSR2 disabled for RKL and ADL-S
   - ACPI _DSM invalid access fixed
   - DMC FW path abstraction
   - ADL-S PCI ID update
   - uAPI headers converted to kerneldoc
   - initial LMEM support for DG1
   - x86/gpu: add Jasperlake to gen11 early quirks

  amdgpu:
   - Aldebaran updates + initial SR-IOV
   - new GPU: Beige Goby and Yellow Carp support
   - more LTTPR display work
   - Vangogh updates
   - SDMA 5.x GCR fixes
   - PCIe ASPM support
   - Renoir TMZ enablement
   - initial multiple eDP panel support
   - use fdinfo to track devices/process info
   - pin/unpin TTM fixes
   - free resource on fence usage query
   - fix fence calculation
   - fix hotunplug/suspend issues
   - GC/MM register access macro cleanup for SR-IOV
   - W=1 fixes
   - ACPI ATCS/ATIF handling rework
   - 16bpc fixed point format support
   - Initial smartshift support
   - RV/PCO power tuning fixes
   - new INFO query for additional vbios info

  amdkfd:
   - SR-IOV aldebaran support
   - HMM SVM support

  radeon:
   - SMU regression fixes
   - Oland flickering fix

  vmwgfx:
   - enable console with fbdev emulation
   - fix cpu updates of coherent multisample surfaces
   - remove reservation semaphore
   - add initial SVGA3 support
   - support arm64

  msm:
   - devcoredump support for display errors
   - dpu/dsi: yaml bindings conversion
   - mdp5: alpha/blend_mode/zpos support
   - a6xx: cached coherent buffer support
   - gpu iova fault improvement
   - a660 support

  rockchip:
   - RK3036 win1 scaling support
   - RK3066/3188 missing register support
   - RK3036/3066/3126/3188 alpha support

  mediatek:
   - MT8167 HDMI support
   - MT8183 DPI dual edge support

  tegra:
   - fixed YUV support/scaling on Tegra186+

  ast:
   - use pcim_iomap
   - fix DP501 EDID

  bochs:
   - screen blanking support

  etnaviv:
   - export more GPU ID values to userspace
   - add HWDB entry for GPU on i.MX8MP
   - rework linear window calcs

  exynos:
   - pm runtime changes

  imx:
   - Annotate dma_fence critical section
   - fix PRG modifiers after drmm conversion
   - Add 8 pixel alignment fix for 1366x768
   - fix YUV advertising
   - add color properties

  ingenic:
   - IPU planes fix

  panfrost:
   - Mediatek MT8183 support + DT bindings
   - export AFBC_FEATURES register to userspace

  simpledrm:
   - %pr for printing resources

  nouveau:
   - pin/unpin TTM fixes

  qxl:
   - unpin shadow BO

  virtio:
   - create dumb BOs as guest blob

  vkms:
   - drmm_universal_plane_alloc
   - add XRGB plane composition
   - overlay support"

* tag 'drm-next-2021-07-01' of git://anongit.freedesktop.org/drm/drm: (1570 commits)
  drm/i915: Reinstate the mmap ioctl for some platforms
  drm/i915/dsc: abstract helpers to get bigjoiner primary/secondary crtc
  Revert "drm/msm/mdp5: provide dynamic bandwidth management"
  drm/msm/mdp5: provide dynamic bandwidth management
  drm/msm/mdp5: add perf blocks for holding fudge factors
  drm/msm/mdp5: switch to standard zpos property
  drm/msm/mdp5: add support for alpha/blend_mode properties
  drm/msm/mdp5: use drm_plane_state for pixel blend mode
  drm/msm/mdp5: use drm_plane_state for storing alpha value
  drm/msm/mdp5: use drm atomic helpers to handle base drm plane state
  drm/msm/dsi: do not enable PHYs when called for the slave DSI interface
  drm/msm: Add debugfs to trigger shrinker
  drm/msm/dpu: Avoid ABBA deadlock between IRQ modules
  drm/msm: devcoredump iommu fault support
  iommu/arm-smmu-qcom: Add stall support
  drm/msm: Improve the a6xx page fault handler
  iommu/arm-smmu-qcom: Add an adreno-smmu-priv callback to get pagefault info
  iommu/arm-smmu: Add support for driver IOMMU fault handlers
  drm/msm: export hangcheck_period in debugfs
  drm/msm/a6xx: add support for Adreno 660 GPU
  ...
2021-07-01 12:53:43 -07:00
Linus Torvalds
c288d9cd71 for-5.14/io_uring-2021-06-30
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmDc0SsQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpt6BD/9ZHzfDCPVfd0ivftRYOS2GECZetR79Ar8h
 RdMPi4iSw1+gFbqKVpD38tBvJsvKq0/jVPap056KaxbdsU+JCG1dYfllbsK4tpVO
 uqDHDIX3YODmkRkqc6IkPtdxvATS3JBGdP9GOSEobgygOPs9qBXXd4tdP+2Hyzna
 0DUIGnuO3VTfBa03OiHoIeC9Zo3o9sCIYHY1RG+awL/+43WeMQ8ZFX4CfYhgWTTp
 HyzzHdu67xAoVgsIyg5dTuV+Vo3cEtHXg8IKbDXoDQ1SAyr96Uw5pJ7JEq80mqyZ
 sxth6PlS0Safh6xJ5w6ZLIAaPz1fkL+2q1CeQAhkeWLuk6FImt0ZoxElbSkW+pTv
 LqVcXl+F65QhNQZ195OgPI+RGTSA5VQlAW0QwGnmEeket7pzqkdcLPVy1CO8ANiT
 t5qn8ZZmNFLMhnWGU/3zNyHQLvwKslxucpvrkS9Ol/6Yh9yKVEsAXC7yrk3F3dAF
 i4RAExbbUzUJKvRkm3kXpwUg2BGtJD7Achw9HD+prFKdt08XDLvffC8GnCqWd/4a
 zL9oSHR2OLV7RAQpDQ5cC7ZjWV20xsd2NM+pHk5rzbb9udQZWrJ2K218sqKkgFme
 MJzYIt/a79KvBh9+TvJBhx1adnmE4gBH4X23ZMN1hMXzoyVY5mELHbe5LwBSkibx
 A1DxPKv4vg==
 =FEZd
 -----END PGP SIGNATURE-----

Merge tag 'for-5.14/io_uring-2021-06-30' of git://git.kernel.dk/linux-block

Pull io_uring updates from Jens Axboe:

 - Multi-queue iopoll improvement (Fam)

 - Allow configurable io-wq CPU masks (me)

 - renameat/linkat tightening (me)

 - poll re-arm improvement (Olivier)

 - SQPOLL race fix (Olivier)

 - Cancelation unification (Pavel)

 - SQPOLL cleanups (Pavel)

 - Enable file backed buffers for shmem/memfd (Pavel)

 - A ton of cleanups and performance improvements (Pavel)

 - Followup and misc fixes (Colin, Fam, Hao, Olivier)

* tag 'for-5.14/io_uring-2021-06-30' of git://git.kernel.dk/linux-block: (83 commits)
  io_uring: code clean for kiocb_done()
  io_uring: spin in iopoll() only when reqs are in a single queue
  io_uring: pre-initialise some of req fields
  io_uring: refactor io_submit_flush_completions
  io_uring: optimise hot path restricted checks
  io_uring: remove not needed PF_EXITING check
  io_uring: mainstream sqpoll task_work running
  io_uring: refactor io_arm_poll_handler()
  io_uring: reduce latency by reissueing the operation
  io_uring: add IOPOLL and reserved field checks to IORING_OP_UNLINKAT
  io_uring: add IOPOLL and reserved field checks to IORING_OP_RENAMEAT
  io_uring: refactor io_openat2()
  io_uring: simplify struct io_uring_sqe layout
  io_uring: update sqe layout build checks
  io_uring: fix code style problems
  io_uring: refactor io_sq_thread()
  io_uring: don't change sqpoll creds if not needed
  io_uring: Create define to modify a SQPOLL parameter
  io_uring: Fix race condition when sqp thread goes to sleep
  io_uring: improve in tctx_task_work() resubmission
  ...
2021-07-01 12:16:24 -07:00
Riccardo Mancini
cf96b8e45a perf session: Add missing evlist__delete when deleting a session
ASan reports a memory leak caused by evlist not being deleted on exit in
perf-report, perf-script and perf-data.
The problem is caused by evlist->session not being deleted, which is
allocated in perf_session__read_header, called in perf_session__new if
perf_data is in read mode.
In case of write mode, the session->evlist is filled by the caller.
This patch solves the problem by calling evlist__delete in
perf_session__delete if perf_data is in read mode.

Changes in v2:
 - call evlist__delete from within perf_session__delete

v1: https://lore.kernel.org/lkml/20210621234317.235545-1-rickyman7@gmail.com/

ASan report follows:

$ ./perf script report flamegraph
=================================================================
==227640==ERROR: LeakSanitizer: detected memory leaks

<SNIP unrelated>

Indirect leak of 2704 byte(s) in 1 object(s) allocated from:
    #0 0x4f4137 in calloc (/home/user/linux/tools/perf/perf+0x4f4137)
    #1 0xbe3d56 in zalloc /home/user/linux/tools/lib/perf/../../lib/zalloc.c:8:9
    #2 0x7f999e in evlist__new /home/user/linux/tools/perf/util/evlist.c:77:26
    #3 0x8ad938 in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3797:20
    #4 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6
    #5 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10
    #6 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12
    #7 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11
    #8 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8
    #9 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2
    #10 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3
    #11 0x7f5260654b74  (/lib64/libc.so.6+0x27b74)

Indirect leak of 568 byte(s) in 1 object(s) allocated from:
    #0 0x4f4137 in calloc (/home/user/linux/tools/perf/perf+0x4f4137)
    #1 0xbe3d56 in zalloc /home/user/linux/tools/lib/perf/../../lib/zalloc.c:8:9
    #2 0x80ce88 in evsel__new_idx /home/user/linux/tools/perf/util/evsel.c:268:24
    #3 0x8aed93 in evsel__new /home/user/linux/tools/perf/util/evsel.h:210:9
    #4 0x8ae07e in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3853:11
    #5 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6
    #6 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10
    #7 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12
    #8 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11
    #9 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8
    #10 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2
    #11 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3
    #12 0x7f5260654b74  (/lib64/libc.so.6+0x27b74)

Indirect leak of 264 byte(s) in 1 object(s) allocated from:
    #0 0x4f4137 in calloc (/home/user/linux/tools/perf/perf+0x4f4137)
    #1 0xbe3d56 in zalloc /home/user/linux/tools/lib/perf/../../lib/zalloc.c:8:9
    #2 0xbe3e70 in xyarray__new /home/user/linux/tools/lib/perf/xyarray.c:10:23
    #3 0xbd7754 in perf_evsel__alloc_id /home/user/linux/tools/lib/perf/evsel.c:361:21
    #4 0x8ae201 in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3871:7
    #5 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6
    #6 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10
    #7 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12
    #8 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11
    #9 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8
    #10 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2
    #11 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3
    #12 0x7f5260654b74  (/lib64/libc.so.6+0x27b74)

Indirect leak of 32 byte(s) in 1 object(s) allocated from:
    #0 0x4f4137 in calloc (/home/user/linux/tools/perf/perf+0x4f4137)
    #1 0xbe3d56 in zalloc /home/user/linux/tools/lib/perf/../../lib/zalloc.c:8:9
    #2 0xbd77e0 in perf_evsel__alloc_id /home/user/linux/tools/lib/perf/evsel.c:365:14
    #3 0x8ae201 in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3871:7
    #4 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6
    #5 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10
    #6 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12
    #7 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11
    #8 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8
    #9 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2
    #10 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3
    #11 0x7f5260654b74  (/lib64/libc.so.6+0x27b74)

Indirect leak of 7 byte(s) in 1 object(s) allocated from:
    #0 0x4b8207 in strdup (/home/user/linux/tools/perf/perf+0x4b8207)
    #1 0x8b4459 in evlist__set_event_name /home/user/linux/tools/perf/util/header.c:2292:16
    #2 0x89d862 in process_event_desc /home/user/linux/tools/perf/util/header.c:2313:3
    #3 0x8af319 in perf_file_section__process /home/user/linux/tools/perf/util/header.c:3651:9
    #4 0x8aa6e9 in perf_header__process_sections /home/user/linux/tools/perf/util/header.c:3427:9
    #5 0x8ae3e7 in perf_session__read_header /home/user/linux/tools/perf/util/header.c:3886:2
    #6 0x8ec714 in perf_session__open /home/user/linux/tools/perf/util/session.c:109:6
    #7 0x8ebe83 in perf_session__new /home/user/linux/tools/perf/util/session.c:213:10
    #8 0x60c6de in cmd_script /home/user/linux/tools/perf/builtin-script.c:3856:12
    #9 0x7b2930 in run_builtin /home/user/linux/tools/perf/perf.c:313:11
    #10 0x7b120f in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8
    #11 0x7b2493 in run_argv /home/user/linux/tools/perf/perf.c:409:2
    #12 0x7b0c89 in main /home/user/linux/tools/perf/perf.c:539:3
    #13 0x7f5260654b74  (/lib64/libc.so.6+0x27b74)

SUMMARY: AddressSanitizer: 3728 byte(s) leaked in 7 allocation(s).

Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210624231926.212208-1-rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-01 16:14:38 -03:00
Riccardo Mancini
6de249d66d perf annotate: Allow 's' on source code lines
In perf annotate, when 's' is pressed on a line containing source code,
it shows the message "Only available for assembly lines".

This patch gets rid of the error, moving the cursr to the next available
asm line (or the closest previous one if no asm line is found moving
forwards), before hiding source code lines.

Changes in v2:
 - handle case of no asm line found in
   annotate_browser__find_next_asm_line by returning NULL and
   handling error in caller.

Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin Liška <mliska@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210624223423.189550-1-rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-01 16:14:38 -03:00
Adrian Hunter
ec4c00fedb perf dlfilter: Add object_code() to perf_dlfilter_fns
Add a function, for use by dlfilters, to read object code.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210627131818.810-11-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-01 16:14:38 -03:00
Adrian Hunter
6495e76252 perf dlfilter: Add attr() to perf_dlfilter_fns
Add a function, for use by dlfilters, to return the perf_event_attr
structure.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210627131818.810-10-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-01 16:14:38 -03:00
Adrian Hunter
244afc0c93 perf dlfilter: Add srcline() to perf_dlfilter_fns
Add a function, for use by dlfilters, to return source code file name and
line number.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210627131818.810-9-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-01 16:14:38 -03:00
Adrian Hunter
e35995effd perf dlfilter: Add insn() to perf_dlfilter_fns
Add a function, for use by dlfilters, to return instruction bytes.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210627131818.810-8-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-01 16:14:38 -03:00
Adrian Hunter
f645744c50 perf dlfilter: Add resolve_address() to perf_dlfilter_fns
Add a function, for use by dlfilters, to resolve addresses from branch
stacks or callchains.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210627131818.810-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-01 16:14:38 -03:00
Adrian Hunter
0beb218315 perf build: Install perf_dlfilter.h
Users of the --dlfilter option need to include perf_dlfilter.h
in their filters. Install it to the include path.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210627131818.810-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-01 16:14:38 -03:00
Adrian Hunter
3d032a2516 perf script: Add option to pass arguments to dlfilters
Add option --dlarg to pass arguments to dlfilters. The --dlarg option can
be repeated to pass more than 1 argument.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210627131818.810-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-01 16:14:37 -03:00
Adrian Hunter
638e2b9984 perf script: Add option to list dlfilters
Add option --list-dlfilters to list dlfilters in the current directory or
the exec-path e.g. ~/libexec/perf-core/dlfilters. Use with option -v (must
come before option --list-dlfilters) to show long descriptions.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210627131818.810-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-01 16:14:37 -03:00
Adrian Hunter
9bde93a79a perf script: Add dlfilter__filter_event_early()
filter_event_early() can be more than 30% faster than filter_event()
because it is called before internal filtering. In other respects it
is the same as filter_event(), except that it will be passed events
that have yet to be filtered out.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210627131818.810-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-01 16:14:37 -03:00
Adrian Hunter
291961fc3c perf script: Add API for filtering via dynamically loaded shared object
In some cases, users want to filter very large amounts of data (e.g.
from AUX area tracing like Intel PT) looking for something specific.
While scripting such as Python can be used, Python is 10 to 20 times
slower than C. So define a C API so that custom filters can be written
and loaded.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210627131818.810-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-01 16:14:37 -03:00
Arnaldo Carvalho de Melo
c435c166dc perf llvm: Return -ENOMEM when asprintf() fails
Zhihao sent a patch but it made llvm__compile_bpf() return what
asprintf() returns on error, which is just -1, but since this function
returns -errno, fix it by returning -ENOMEM for this case instead.

Fixes: cb76371441 ("perf llvm: Allow passing options to llc ...")
Fixes: 5eab5a7ee0 ("perf llvm: Display eBPF compiling command ...")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reported-by: Zhihao Cheng <chengzhihao1@huawei.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yu Kuai <yukuai3@huawei.com>
Cc: clang-built-linux@googlegroups.com
Link: http://lore.kernel.org/lkml/20210609115945.2193194-1-chengzhihao1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-01 16:14:37 -03:00
James Clark
0323dea318 perf cs-etm: Delay decode of non-timeless data until cs_etm__flush_events()
Currently, timeless mode starts the decode on PERF_RECORD_EXIT, and
non-timeless mode starts decoding on the fist PERF_RECORD_AUX record.

This can cause the "data has no samples!" error if the first
PERF_RECORD_AUX record comes before the first (or any relevant)
PERF_RECORD_MMAP2 record because the mmaps are required by the decoder
to access the binary data.

This change pushes the start of non-timeless decoding to the very end of
parsing the file. The PERF_RECORD_EXIT event can't be used because it
might not exist in system-wide or snapshot modes.

I have not been able to find the exact cause for the events to be
intermittently in the wrong order in the basic scenario:

	perf record -e cs_etm/@tmc_etr0/u top

But it can be made to happen every time with the --delay option. This is
because "enable_on_exec" is disabled, which causes tracing to start
before the process to be launched is exec'd. For example:

	perf record -e cs_etm/@tmc_etr0/u --delay=1 top
	perf report -D | grep 'AUX\|MAP'

	0 16714475632740 0x520 [0x40]: PERF_RECORD_AUX offset: 0 size: 0x30 flags: 0 []
	0 16714476494960 0x5d0 [0x40]: PERF_RECORD_AUX offset: 0x30 size: 0x30 flags: 0 []
	0 16714478208900 0x660 [0x40]: PERF_RECORD_AUX offset: 0x60 size: 0x30 flags: 0 []
	4294967295 16714478293340 0x700 [0x70]: PERF_RECORD_MMAP2 8712/8712: [0x557a460000(0x54000) @ 0 00:17 5329258 0]: r-xp /usr/bin/top
	4294967295 16714478353020 0x770 [0x88]: PERF_RECORD_MMAP2 8712/8712: [0x7f86f72000(0x34000) @ 0 00:17 5214354 0]: r-xp /usr/lib/aarch64-linux-gnu/ld-2.31.so

Another scenario in which decoding from the first aux record fails is a
workload that forks. Although the aux record comes after 'bash', it
comes before 'top', which is what we are interested in. For example:

	perf record -e cs_etm/@tmc_etr0/u -- bash -c top
	perf report -D | grep 'AUX\|MAP'

	4294967295 16853946421300 0x510 [0x70]: PERF_RECORD_MMAP2 8723/8723: [0x558f280000(0x142000) @ 0 00:17 5213953 0]: r-xp /usr/bin/bash
	4294967295 16853946543560 0x580 [0x88]: PERF_RECORD_MMAP2 8723/8723: [0x7fbba6e000(0x34000) @ 0 00:17 5214354 0]: r-xp /usr/lib/aarch64-linux-gnu/ld-2.31.so
	4294967295 16853946628420 0x608 [0x68]: PERF_RECORD_MMAP2 8723/8723: [0x7fbba9e000(0x1000) @ 0 00:00 0 0]: r-xp [vdso]
	0 16853947067300 0x690 [0x40]: PERF_RECORD_AUX offset: 0 size: 0x3a60 flags: 0 []
	...
	0 16853966602580 0x1758 [0x40]: PERF_RECORD_AUX offset: 0xc2470 size: 0x30 flags: 0 []
	4294967295 16853967119860 0x1818 [0x70]: PERF_RECORD_MMAP2 8723/8723: [0x5559e70000(0x54000) @ 0 00:17 5329258 0]: r-xp /usr/bin/top
	4294967295 16853967181620 0x1888 [0x88]: PERF_RECORD_MMAP2 8723/8723: [0x7f9ed06000(0x34000) @ 0 00:17 5214354 0]: r-xp /usr/lib/aarch64-linux-gnu/ld-2.31.so
	4294967295 16853967237180 0x1910 [0x68]: PERF_RECORD_MMAP2 8723/8723: [0x7f9ed36000(0x1000) @ 0 00:00 0 0]: r-xp [vdso]

A third scenario is when the majority of time is spent in a shared
library that is not loaded at startup. For example a dynamically loaded
plugin.

Testing
=======

Testing was done by checking if any samples that are present in the
old output are missing from the new output. Timestamps must be
stripped out with awk because now they are set to the last AUX sample,
rather than the first:

	./perf script $4 | awk '!($4="")' > new.script
	./perf-default script $4 | awk '!($4="")' > default.script
	comm -13 <(sort -u new.script) <(sort -u default.script)

Testing showed that the new output is a superset of the old. When lines
appear in the comm output, it is not because they are missing but
because [unknown] is now resolved to sensible locations. For example
last putp branch here now resolves to libtinfo, so it's not missing
from the output, but is actually improved:

Old:
	top 305 [001]  1 branches:uH: 402830 _init+0x30 (/usr/bin/top.procps) => 404a1c [unknown] (/usr/bin/top.procps)
	top 305 [001]  1 branches:uH: 404a20 [unknown] (/usr/bin/top.procps) => 402970 putp@plt+0x0 (/usr/bin/top.procps)
	top 305 [001]  1 branches:uH: 40297c putp@plt+0xc (/usr/bin/top.procps) => 0 [unknown] ([unknown])
New:
	top 305 [001]  1 branches:uH: 402830 _init+0x30 (/usr/bin/top.procps) => 404a1c [unknown] (/usr/bin/top.procps)
	top 305 [001]  1 branches:uH: 404a20 [unknown] (/usr/bin/top.procps) => 402970 putp@plt+0x0 (/usr/bin/top.procps)
	top 305 [001]  1 branches:uH: 40297c putp@plt+0xc (/usr/bin/top.procps) => 7f8ab39208 putp+0x0 (/lib/libtinfo.so.5.9)

In the following two modes, decoding now works and the "data has no
samples!" error is not displayed any more:

	perf record -e cs_etm/@tmc_etr0/u -- bash -c top
	perf record -e cs_etm/@tmc_etr0/u --delay=1 top

In snapshot mode, there is also an improvement to decoding. Previously
samples for the 'kill' process that was used to send SIGUSR2 were
completely missing, because the process hadn't started yet. But now
there are additional samples present:

	perf record -e cs_etm/@tmc_etr0/u --snapshot -a
	perf script

		stress 19380 [003] 161627.938153:    1000000    instructions:uH:      aaaabb612fb4 [unknown] (/usr/bin/stress)
		  kill 19644 [000] 161627.938153:    1000000    instructions:uH:      ffffae0ef210 [unknown] (/lib/aarch64-linux-gnu/ld-2.27.so)
		stress 19380 [003] 161627.938153:    1000000    instructions:uH:      ffff9e754d40 random_r+0x20 (/lib/aarch64-linux-gnu/libc-2.27.so)

Also tested was the round trip of 'perf inject' followed by 'perf
report' which has the same differences and improvements.

Signed-off-by: James Clark <james.clark@arm.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Al Grant <al.grant@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Branislav Rankov <branislav.rankov@arm.com>
Cc: Denis Nikitin <denik@chromium.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: coresight@lists.linaro.org
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lore.kernel.org/lkml/20210609130421.13934-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-01 16:14:37 -03:00
Arnaldo Carvalho de Melo
f88bb1cb3e tools headers UAPI: Synch KVM's svm.h header with the kernel
To pick up the changes from:

  59d21d67f3 ("KVM: SVM: Software reserved fields")

Picking the new SVM_EXIT_SW exit reasons.

Addressing this perf build warning:

  Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/svm.h' differs from latest version at 'arch/x86/include/uapi/asm/svm.h'
  diff -u tools/arch/x86/include/uapi/asm/svm.h arch/x86/include/uapi/asm/svm.h

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Vineeth Pillai <viremana@linux.microsoft.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-01 16:14:37 -03:00
Arnaldo Carvalho de Melo
795c4ab87e tools kvm headers arm64: Update KVM headers from the kernel sources
To pick the changes from:

  f0376edb1d ("KVM: arm64: Add ioctl to fetch/store tags in a guest")

That don't causes any changes in tooling (when built on x86), only
addresses this perf build warning:

  Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h'
  diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h

Cc: Marc Zyngier <maz@kernel.org>
Cc: Steven Price <steven.price@arm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-01 16:14:37 -03:00
Arnaldo Carvalho de Melo
e48f62aece tools headers UAPI: Sync linux/kvm.h with the kernel sources
To pick the changes in:

  19238e75bd ("kvm: x86: Allow userspace to handle emulation errors")
  cb082bfab5 ("KVM: stats: Add fd-based API to read binary stats data")
  b87cc116c7 ("KVM: PPC: Book3S HV: Add KVM_CAP_PPC_RPT_INVALIDATE capability")
  f0376edb1d ("KVM: arm64: Add ioctl to fetch/store tags in a guest")
  0dbb112304 ("KVM: X86: Introduce KVM_HC_MAP_GPA_RANGE hypercall")
  6dba940352 ("KVM: x86: Introduce KVM_GET_SREGS2 / KVM_SET_SREGS2")
  644f706719 ("KVM: x86: hyper-v: Introduce KVM_CAP_HYPERV_ENFORCE_CPUID")

That automatically adds support for these new ioctls:

  $ tools/perf/trace/beauty/kvm_ioctl.sh > before
  $ cp include/uapi/linux/kvm.h tools/include/uapi/linux/kvm.h
  $ tools/perf/trace/beauty/kvm_ioctl.sh > after
  $ diff -u before after
  --- before	2021-07-01 13:42:07.006387354 -0300
  +++ after	2021-07-01 13:45:16.051649301 -0300
  @@ -95,6 +95,9 @@
   	[0xc9] = "XEN_HVM_SET_ATTR",
   	[0xca] = "XEN_VCPU_GET_ATTR",
   	[0xcb] = "XEN_VCPU_SET_ATTR",
  +	[0xcc] = "GET_SREGS2",
  +	[0xcd] = "SET_SREGS2",
  +	[0xce] = "GET_STATS_FD",
   	[0xe0] = "CREATE_DEVICE",
   	[0xe1] = "SET_DEVICE_ATTR",
   	[0xe2] = "GET_DEVICE_ATTR",
  $

This silences these perf build warning:

  Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h'
  diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
  Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
  diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h

Cc: Aaron Lewis <aaronlewis@google.com>
Cc: Ashish Kalra <ashish.kalra@amd.com>
Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Jing Zhang <jingzhangos@google.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-01 16:14:37 -03:00
Arnaldo Carvalho de Melo
cc200a7de9 tools headers cpufeatures: Sync with the kernel sources
To pick the changes from:

  1348924ba8 ("x86/msr: Define new bits in TSX_FORCE_ABORT MSR")
  cbcddaa33d ("perf/x86/rapl: Use CPUID bit on AMD and Hygon parts")

This only causes these perf files to be rebuilt:

  CC       /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
  CC       /tmp/build/perf/bench/mem-memset-x86-64-asm.o

And addresses this perf build warning:

  Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
  diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h

Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-01 16:14:37 -03:00
Arnaldo Carvalho de Melo
14c6ef2b55 tools include UAPI: Update linux/mount.h copy
To pick the changes from:

  dd8b477f9a ("mount: Support "nosymfollow" in new mount api")

That ends up adding support for the new MOUNT_ATTR_NOSYMFOLLOW mount
attribute:

  $ tools/perf/trace/beauty/fsmount.sh > before
  $ cp include/uapi/linux/mount.h tools/include/uapi/linux/mount.h
  $ tools/perf/trace/beauty/fsmount.sh > after
  $ diff -u before after
  --- before	2021-07-01 13:34:04.542517355 -0300
  +++ after	2021-07-01 13:34:12.423694537 -0300
  @@ -7,4 +7,5 @@
   	[ilog2(0x00000020) + 1] = "STRICTATIME",
   	[ilog2(0x00000080) + 1] = "NODIRATIME",
   	[ilog2(0x00100000) + 1] = "IDMAP",
  +	[ilog2(0x00200000) + 1] = "NOSYMFOLLOW",
   };
  $

So now one can use it in --filter expressions for tracepoints.

This silences this perf build warnings:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/mount.h' differs from latest version at 'include/uapi/linux/mount.h'
  diff -u tools/include/uapi/linux/mount.h include/uapi/linux/mount.h

Cc: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-01 16:14:36 -03:00
Arnaldo Carvalho de Melo
04df0dc118 tools arch x86: Sync the msr-index.h copy with the kernel sources
To pick up the changes from these csets:

  1348924ba8 ("x86/msr: Define new bits in TSX_FORCE_ABORT MSR")

That cause no changes to tooling:

  $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before
  $ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
  $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after
  $ diff -u before after
  $

Just silences this perf build warning:

  Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h'
  diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h

Cc: Borislav Petkov <bp@suse.de>
Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-01 16:14:36 -03:00
Leo Yan
8941ba502f perf arm-spe: Don't wait for PERF_RECORD_EXIT event
When decode Arm SPE trace, it waits for PERF_RECORD_EXIT event (the last
perf event) for processing trace data, which is needless and even might
cause logic error, e.g. it might fail to correlate perf events with Arm
SPE events correctly.

So this patch removes the condition checking for PERF_RECORD_EXIT event.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Tested-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Grant <Al.Grant@arm.com>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210519071939.1598923-6-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-01 16:14:36 -03:00
Leo Yan
afb5e9e47f perf arm-spe: Bail out if the trace is later than perf event
It's possible that record in Arm SPE trace is later than perf event and
vice versa.  This asks to correlate the perf events and Arm SPE
synthesized events to be processed in the manner of correct timing.

To achieve the time ordering, this patch reverses the flow, it firstly
calls arm_spe_sample() and then calls arm_spe_decode().  By comparing
the timestamp value and detect the perf event is coming earlier than Arm
SPE trace data, it bails out from the decoding loop, the last record is
pushed into auxtrace stack and is deferred to generate sample.  To track
the timestamp, everytime it updates timestamp for the latest record.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Tested-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Grant <Al.Grant@arm.com>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20210519071939.1598923-5-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-01 16:14:36 -03:00
Leo Yan
85498f756f perf arm-spe: Assign kernel time to synthesized event
In current code, it assigns the arch timer counter to the synthesized
samples Arm SPE trace, thus the samples don't contain the kernel time
but only contain the raw counter value.

To fix the issue, this patch converts the timer counter to kernel time
and assigns it to sample timestamp.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Tested-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Grant <Al.Grant@arm.com>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20210519071939.1598923-4-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-01 16:14:36 -03:00
Leo Yan
630519014c perf arm-spe: Convert event kernel time to counter value
When handle a perf event, Arm SPE decoder needs to decide if this perf
event is earlier or later than the samples from Arm SPE trace data; to
do comparision, it needs to use the same unit for the time.

This patch converts the event kernel time to arch timer's counter value,
thus it can be used to compare with counter value contained in Arm SPE
Timestamp packet.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Tested-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Grant <Al.Grant@arm.com>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20210519071939.1598923-3-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-01 16:14:36 -03:00
Leo Yan
c210c30696 perf arm-spe: Save clock parameters from TIME_CONV event
During the recording phase, "perf record" tool synthesizes event
PERF_RECORD_TIME_CONV for the hardware clock parameters and saves the
event into the data file.

Afterwards, when processing the data file, the event TIME_CONV will be
processed at the very early time and is stored into session context.

This patch extracts these parameters from the session context and saves
into the structure "spe->tc" with the type perf_tsc_conversion, so that
the parameters are ready for conversion between clock counter and time
stamp.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Tested-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Al Grant <Al.Grant@arm.com>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20210519071939.1598923-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-01 16:14:36 -03:00
Leo Yan
2f01c200d4 perf cs-etm: Remove callback cs_etm_find_snapshot()
The callback cs_etm_find_snapshot() is invoked for snapshot mode, its
main purpose is to find the correct AUX trace data and returns "head"
and "old" (we can call "old" as "old head") to the caller, the caller
__auxtrace_mmap__read() uses these two pointers to decide the AUX trace
data size.

This patch removes cs_etm_find_snapshot() with below reasons:

- The first thing in cs_etm_find_snapshot() is to check if the head has
  wrapped around, if it is not, directly bails out.  The checking is
  pointless, this is because the "head" and "old" pointers both are
  monotonical increasing so they never wrap around.

- cs_etm_find_snapshot() adjusts the "head" and "old" pointers and
  assumes the AUX ring buffer is fully filled with the hardware trace
  data, so it always subtracts the difference "mm->len" from "head" to
  get "old".  Let's imagine the snapshot is taken in very short
  interval, the tracers only fill a small chunk of the trace data into
  the AUX ring buffer, in this case, it's wrongly to copy the whole the
  AUX ring buffer to perf file.

- As the "head" and "old" pointers are monotonically increased, the
  function __auxtrace_mmap__read() handles these two pointers properly.
  It calculates the reminders for these two pointers, and the size is
  clamped to be never more than "snapshot_size".  We can simply reply on
  the function __auxtrace_mmap__read() to calculate the correct result
  for data copying, it's not necessary to add Arm CoreSight specific
  callback.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: James Clark <james.clark@arm.com>
Tested-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Daniel Kiss <daniel.kiss@arm.com>
Cc: Denis Nikitin <denik@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: coresight@lists.linaro.org
Link: http://lore.kernel.org/lkml/20210701093537.90759-3-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-01 16:14:36 -03:00
Namhyung Kim
d6a735ef32 perf bpf_counter: Move common functions to bpf_counter.h
Some helper functions will be used for cgroup counting too.  Move them
to a header file for sharing.

Committer notes:

Fix the build on older systems with:

  -       struct bpf_map_info map_info = {0};
  +       struct bpf_map_info map_info = { .id = 0, };

This wasn't breaking the build in such systems as bpf_counter.c isn't
built due to:

tools/perf/util/Build:

  perf-$(CONFIG_PERF_BPF_SKEL) += bpf_counter.o

The bpf_counter.h file on the other hand is included from places that
are built everywhere.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210625071826.608504-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-01 16:14:19 -03:00
Linus Torvalds
911a2997a5 \n
-----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmDcl7AACgkQnJ2qBz9k
 QNnsBQf+LBAPsfykQ/f8EdHErO1lfbVTmwf2g/JzTkjrIVZTZ6Ic47aCIiFxgHU2
 Js9ufaPxpsbbopzpn2PAoCUzxNsZDqgXtnC03MOUAqoSFbAvgLHz2sQwjqeYJUGQ
 P6n7VipEA/qBVpQI5zeCUhHYcahoNrRjSLzaFnE2Z8CrQYQ6Ry9gVEhduvu2OTru
 62cWlAWlTJfx/FcR1Y0F/ZznnNSKMiAHcEe3F6Beztplg2ooq+z6FclJYrkmnxMq
 SXSOsqTCdi1/oFx36NpvLkykrIS9I7N/iqCnKwbm6X+nyZZKyAwYZhWVqkbozPPu
 +u1Ppq8o0IuWwEA6/UAmxgAO3m/Gkw==
 =tn0h
 -----END PGP SIGNATURE-----

Merge tag 'fs_for_v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs

Pull misc fs updates from Jan Kara:
 "The new quotactl_fd() syscall (remake of quotactl_path() syscall that
  got introduced & disabled in 5.13 cycle), and couple of udf, reiserfs,
  isofs, and writeback fixes and cleanups"

* tag 'fs_for_v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  writeback: fix obtain a reference to a freeing memcg css
  quota: remove unnecessary oom message
  isofs: remove redundant continue statement
  quota: Wire up quotactl_fd syscall
  quota: Change quotactl_path() systcall to an fd-based one
  reiserfs: Remove unneed check in reiserfs_write_full_page()
  udf: Fix NULL pointer dereference in udf_symlink function
  reiserfs: add check for invalid 1st journal block
2021-07-01 12:06:39 -07:00
Manfred Spraul
b869d5be0a ipc/util.c: use binary search for max_idx
If semctl(), msgctl() and shmctl() are called with IPC_INFO, SEM_INFO,
MSG_INFO or SHM_INFO, then the return value is the index of the highest
used index in the kernel's internal array recording information about all
SysV objects of the requested type for the current namespace.  (This
information can be used with repeated ..._STAT or ..._STAT_ANY operations
to obtain information about all SysV objects on the system.)

There is a cache for this value.  But when the cache needs up be updated,
then the highest used index is determined by looping over all possible
values.  With the introduction of IPCMNI_EXTEND_SHIFT, this could be a
loop over 16 million entries.  And due to /proc/sys/kernel/*next_id, the
index values do not need to be consecutive.

With <write 16000000 to msg_next_id>, msgget(), msgctl(,IPC_RMID) in a
loop, I have observed a performance increase of around factor 13000.

As there is no get_last() function for idr structures: Implement a
"get_last()" using a binary search.

As far as I see, ipc is the only user that needs get_last(), thus
implement it in ipc/util.c and not in a central location.

[akpm@linux-foundation.org: tweak comment, fix typo]

Link: https://lkml.kernel.org/r/20210425075208.11777-2-manfred@colorfullife.com
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Cc: <1vier1@web.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 11:06:07 -07:00
Manfred Spraul
17d056e0bd ipc/sem.c: use READ_ONCE()/WRITE_ONCE() for use_global_lock
The patch solves three weaknesses in ipc/sem.c:

1) The initial read of use_global_lock in sem_lock() is an intentional
   race.  KCSAN detects these accesses and prints a warning.

2) The code assumes that plain C read/writes are not mangled by the CPU
   or the compiler.

3) The comment it sysvipc_sem_proc_show() was hard to understand: The
   rest of the comments in ipc/sem.c speaks about sem_perm.lock, and
   suddenly this function speaks about ipc_lock_object().

To solve 1) and 2), use READ_ONCE()/WRITE_ONCE().  Plain C reads are used
in code that owns sma->sem_perm.lock.

The comment is updated to solve 3)

[manfred@colorfullife.com: use READ_ONCE()/WRITE_ONCE() for use_global_lock]
  Link: https://lkml.kernel.org/r/20210627161919.3196-3-manfred@colorfullife.com

Link: https://lkml.kernel.org/r/20210514175319.12195-1-manfred@colorfullife.com
Signed-off-by: Manfred Spraul <manfred@colorfullife.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Davidlohr Bueso <dbueso@suse.de>
Cc: <1vier1@web.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-01 11:06:07 -07:00