Commit 5f78e29cee ("qeth: optimize IP handling in rx_mode callback")
reworked how secondary addresses are managed for qeth devices.
Instead of dropping & subsequently re-adding all addresses on every
ndo_set_rx_mode() call, qeth now keeps track of the addresses that are
currently registered with the HW.
On a ndo_set_rx_mode(), we thus only need to do (de-)registration
requests for the addresses that have actually changed.
On L3 devices, the lookup for IPv4 Multicast addresses checks the wrong
hashtable - and thus never finds a match. As a result, we first delete
*all* such addresses, and then re-add them again. So each set_rx_mode()
causes a short period where the IPv4 Multicast addresses are not
registered, and the card stops forwarding inbound traffic for them.
Fix this by setting the ->is_multicast flag on the lookup object, thus
enabling qeth_l3_ip_from_hash() to search the correct hashtable and
find a match there.
Fixes: 5f78e29cee ("qeth: optimize IP handling in rx_mode callback")
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Xu says:
====================
vhost: fix a few skb leaks
Matthew found a roughly 40% tcp throughput regression with commit
c67df11f(vhost_net: try batch dequing from skb array) as discussed
in the following thread:
https://www.mail-archive.com/netdev@vger.kernel.org/msg187936.html
v4:
- fix zero iov iterator count in tap/tap_do_read()(Jason)
- don't put tun in case of EBADFD(Jason)
- Replace msg->msg_control with new 'skb' when calling tun/tap_do_read()
v3:
- move freeing skb from vhost to tun/tap recvmsg() to not
confuse the callers.
v2:
- add Matthew as the reporter, thanks matthew.
- moving zero headcount check ahead instead of defer consuming skb
due to jason and mst's comment.
- add freeing skb in favor of recvmsg() fails.
====================
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tap_recvmsg() supports accepting skb by msg_control after
commit 3b4ba04acc ("tap: support receiving skb from msg_control"),
the skb if presented should be freed within the function, otherwise
it would be leaked.
Signed-off-by: Wei Xu <wexu@redhat.com>
Reported-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tun_recvmsg() supports accepting skb by msg_control after
commit ac77cfd425 ("tun: support receiving skb through msg_control"),
the skb if presented should be freed no matter how far it can go
along, otherwise it would be leaked.
This patch fixes several missed cases.
Signed-off-by: Wei Xu <wexu@redhat.com>
Reported-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matthew found a roughly 40% tcp throughput regression with commit
c67df11f(vhost_net: try batch dequing from skb array) as discussed
in the following thread:
https://www.mail-archive.com/netdev@vger.kernel.org/msg187936.html
Eventually we figured out that it was a skb leak in handle_rx()
when sending packets to the VM. This usually happens when a guest
can not drain out vq as fast as vhost fills in, afterwards it sets
off the traffic jam and leaks skb(s) which occurs as no headcount
to send on the vq from vhost side.
This can be avoided by making sure we have got enough headcount
before actually consuming a skb from the batched rx array while
transmitting, which is simply done by moving checking the zero
headcount a bit ahead.
Signed-off-by: Wei Xu <wexu@redhat.com>
Reported-by: Matthew Rosato <mjrosato@linux.vnet.ibm.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan says:
====================
bnxt_en: Fixes.
A shutdown fix for SMARTNIC, 2 fixes related to TC Flower vxlan
filters, and the last one fixes an out-of-scope variable when sending
short firmware messages.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
short_input variable is assigned to another data pointer which is
referred out of its scope. Fix it by moving short_input definition
to the beginning of bnxt_hwrm_do_send_msg() function.
No failure has been reported so far due to this issue.
Fixes: e605db801b ("bnxt_en: Support for Short Firmware Message")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For flows that involve a vxlan encap action, the vxlan sock
interface may be specified as the outgoing interface. The driver
must resolve the outgoing PF interface used by this socket and
use the dst_fid of the PF in the hwrm_cfa_encap_record_alloc cmd.
Similarily for flows that have a vxlan decap action, the
fid of the incoming PF interface must be used as the src_fid in
the hwrm_cfa_decap_filter_alloc cmd.
Fixes: 8c95f773b4 ("bnxt_en: add support for Flower based vxlan encap/decap offload")
Signed-off-by: Sathya Perla <sathya.perla@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While creating a decap filter the tunnel smac need not (and must not) be
specified as we cannot ascertain the neighbor in the recv path. 'ttl'
match is also not needed for the decap filter and must be wild-carded.
Fixes: f484f6782e ("bnxt_en: add hwrm FW cmds for cfa_encap_record and decap_filter")
Signed-off-by: Sunil Challa <sunilkumar.challa@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current 'bnxt_shutdown' implementation only invokes
'bnxt_ulp_shutdown' to shut down RoCE in the case when the system is in
the path of power off (SYSTEM_POWER_OFF). While this may work in most
cases, it does not work in the smart NIC case, when Linux 'reboot'
command is initiated from the Linux that runs on the ARM cores of the
NIC card. In this particular case, Linux 'reboot' results in a system
'L3' level reset where the entire ARM and associated subsystems are
being reset, but at the same time, Nitro core is being kept in sane state
(to allow external PCIe connected servers to continue to work). Without
properly shutting down RoCE and freeing all associated resources, it
results in the ARM core to hang immediately after the 'reboot'
By always invoking 'bnxt_ulp_shutdown' in 'bnxt_shutdown', it fixes the
above issue
Fixes: 0efd2fc65c ("bnxt_en: Add a callback to inform RDMA driver during PCI shutdown.")
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Russell King says:
====================
SFP/phylink fixes
Here are four phylink fixes:
- the "options" is a big-endian value, we must test the bits taking the
endian-ness into account.
- improve the handling of RX_LOS polarity, taking no RX_LOS polarity
bits set to mean there is no RX_LOS functionality provided.
- do not report modules that require the address mode switching as
supporting SFF8472.
- ensure that the mac_link_down() function is called when phylink_stop()
is called.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ensure that we tell the MAC to take the link down when phylink_stop()
is called, and that this completes prior to phylink_stop() returns.
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
We do not support SFP modules which require the address change sequence
as detailed by SFF 8472 revision 1.22 section 8.9. Warn when these
modules are inserted, and treat them as SFF8079 modules for ethtool.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are two bits in the option word for the RX_LOS signal. One
reports that the RX_LOS signal is active high, the other reports that
it is active low. When both or neither are set, the result is not
well defined in the specification.
Rather than assuming that neither set means normal RX_LOS, take this
as meaning no RX_LOS signal available, thereby ignoring the signal.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
The options word is a be16 quantity, so we need to test the flags
having converted the endian-ness. Convert the flag bits to be16,
which can be optimised by the compiler, rather than converting a
variable at runtime.
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix obvious typo that first return value is set but not checked.
Signed-off-by: Max Uvarov <muvarov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Maciej Żenczykowski reported some panics in tcp_twsk_destructor()
that might be caused by the following bug.
timewait timer is pinned to the cpu, because we want to transition
timwewait refcount from 0 to 4 in one go, once everything has been
initialized.
At the time commit ed2e923945 ("tcp/dccp: fix timewait races in timer
handling") was merged, TCP was always running from BH habdler.
After commit 5413d1babe ("net: do not block BH while processing
socket backlog") we definitely can run tcp_time_wait() from process
context.
We need to block BH in the critical section so that the pinned timer
has still its purpose.
This bug is more likely to happen under stress and when very small RTO
are used in datacenter flows.
Fixes: 5413d1babe ("net: do not block BH while processing socket backlog")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Maciej Żenczykowski <maze@google.com>
Acked-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long says:
====================
sctp: a couple of fixes for chunks abandoned in prsctp
Now when abandoning chunks in prsctp, it doesn't consider for frags in
one msg, which would cause peer can never receive the whole frags for
one msg to get them reassembled, these pieces of this msg will stay in
the reasm queue forever and block the following chunks' receiving.
This patchset is to fix them in patch 2 and 3, and also fix another
issue for prsctp in patch 1.
====================
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now for the abandoned chunks in unsent outq, it would just free the chunks.
Because no tsn is assigned to them yet, there's no need to send fwd tsn to
peer, unlike for the abandoned chunks in sent outq.
The problem is when parts of the msg have been sent and the other frags
are still in unsent outq, if they are abandoned/dropped, the peer would
never get this msg reassembled.
So these frags in unsent outq can't be dropped if this msg already has
outstanding frags.
This patch does the check in sctp_chunk_abandoned and
sctp_prsctp_prune_unsent.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As rfc3758#section-3.1 demands:
A3) When a TSN is "abandoned", if it is part of a fragmented message,
all other TSN's within that fragmented message MUST be abandoned
at the same time.
Besides, if it couldn't handle this, the rest frags would never get
assembled in peer side.
This patch supports it by adding abandoned flag in sctp_datamsg, when
one chunk is being abandoned, set chunk->msg->abandoned as well. Next
time when checking for abandoned, go checking chunk->msg->abandoned
first.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now outstanding_bytes is only increased when appending chunks into one
packet and sending it at 1st time, while decreased when it is about to
move into retransmit queue. It means outstanding_bytes value is already
decreased for all chunks in retransmit queue.
However sctp_prsctp_prune_sent is a common function to check the chunks
in both transmitted and retransmit queue, it decrease outstanding_bytes
when moving a chunk into abandoned queue from either of them.
It could cause outstanding_bytes underflow, as it also decreases it's
value for the chunks in retransmit queue.
This patch fixes it by only updating outstanding_bytes for transmitted
queue when pruning queues for prsctp prio policy, the same fix is also
needed in sctp_check_transmitted.
Fixes: 8dbdf1f5b0 ("sctp: implement prsctp PRIO policy")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When configuring an IPv6 address mask, we should use SLICE_NUM_MASK as
the mask in order to make sure all bits are masked by the hardware.
Also, we want matching entries to have a CHAIN_ID value set to the same
value as the rule index we return to user-space for convenience, so fix
that too.
Fixes: ba0696c22e ("net: dsa: bcm_sf2: Add support for IPv6 CFP rules")
Fixes: dd8eff6834 ("net: dsa: bcm_sf2: Allow matching arbitrary IPv6 masks/lengths")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After parsing the sit netlink change info, we forget to update frag_off in
ipip6_tunnel_update(). Fix it by assigning frag_off with new value.
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tcp_v6_send_reset() expects to receive an skb with skb->cb[] layout as
used in TCP stack.
MD5 lookup uses tcp_v6_iif() and tcp_v6_sdif() and thus
TCP_SKB_CB(skb)->header.h6
This patch probably fixes RST packets sent on behalf of a timewait md5
ipv6 socket.
Before Florian patch, tcp_v6_restore_cb() was needed before jumping to
no_tcp_socket label.
Fixes: 271c3b9b7b ("tcp: honour SO_BINDTODEVICE for TW_RST case too")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Florian Westphal <fw@strlen.de>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to commit d7fb60b9ca ("net_sched: get rid of tcfa_rcu"),
TC actions don't need to respect RCU grace period, because it
is either just detached from tc filter (standalone case) or
it is removed together with tc filter (bound case) in which case
RCU grace period is already respected at filter layer.
Fixes: 5c5670fae4 ("net/sched: Introduce sample tc action")
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Yotam Gigi <yotamg@mellanox.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=cyW0
-----END PGP SIGNATURE-----
Merge tag 'rxrpc-fixes-20171129' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
rxrpc: Fixes
Here are three patches for AF_RXRPC. One removes some whitespace, one
fixes terminal ACK generation and the third makes a couple of places
actually use the timeout value just determined rather than ignoring it.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver expect "allwinner,leds-active-low" to be in PHY node, but
the binding doc expect it to be in MAC node.
Since all board DT use it also in MAC node, the driver need to search
allwinner,leds-active-low in MAC node.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reserved and unused fields in the Tx descriptors should be 0. The PPv2
driver doesn't clear them at run-time (for performance reasons) but
these descriptors aren't zeroed when allocated, which can lead to
unpredictable behaviors. This patch fixes this by using
dma_zalloc_coherent instead of dma_alloc_coherent.
Fixes: 3f518509de ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Yan Markman <ymarkman@marvell.com>
[Antoine: commit message]
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Fixes from Trond for some races in the NFSv4 state code.
- Fix from Naofumi Honda for a typo in the blocked lock
notificiation code.
- Fixes from Vasily Averin for some problems starting and
stopping lockd especially in network namespaces.
-----BEGIN PGP SIGNATURE-----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=pR9D
-----END PGP SIGNATURE-----
Merge tag 'nfsd-4.15-1' of git://linux-nfs.org/~bfields/linux
Pull nfsd fixes from Bruce Fields:
"I screwed up my merge window pull request; I only sent half of what I
meant to.
There were no new features, just bugfixes of various importance and
some very minor cleanup, so I think it's all still appropriate for
-rc2.
Highlights:
- Fixes from Trond for some races in the NFSv4 state code.
- Fix from Naofumi Honda for a typo in the blocked lock notificiation
code
- Fixes from Vasily Averin for some problems starting and stopping
lockd especially in network namespaces"
* tag 'nfsd-4.15-1' of git://linux-nfs.org/~bfields/linux: (23 commits)
lockd: fix "list_add double add" caused by legacy signal interface
nlm_shutdown_hosts_net() cleanup
race of nfsd inetaddr notifiers vs nn->nfsd_serv change
race of lockd inetaddr notifiers vs nlmsvc_rqst change
SUNRPC: make cache_detail structures const
NFSD: make cache_detail structures const
sunrpc: make the function arg as const
nfsd: check for use of the closed special stateid
nfsd: fix panic in posix_unblock_lock called from nfs4_laundromat
lockd: lost rollback of set_grace_period() in lockd_down_net()
lockd: added cleanup checks in exit_net hook
grace: replace BUG_ON by WARN_ONCE in exit_net hook
nfsd: fix locking validator warning on nfs4_ol_stateid->st_mutex class
lockd: remove net pointer from messages
nfsd: remove net pointer from debug messages
nfsd: Fix races with check_stateid_generation()
nfsd: Ensure we check stateid validity in the seqid operation checks
nfsd: Fix race in lock stateid creation
nfsd4: move find_lock_stateid
nfsd: Ensure we don't recognise lock stateids after freeing them
...
-----BEGIN PGP SIGNATURE-----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=7UW+
-----END PGP SIGNATURE-----
Merge tag 'for-4.15-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"We've collected some fixes in since the pre-merge window freeze.
There's technically only one regression fix for 4.15, but the rest
seems important and candidates for stable.
- fix missing flush bio puts in error cases (is serious, but rarely
happens)
- fix reporting stat::st_blocks for buffered append writes
- fix space cache invalidation
- fix out of bound memory access when setting zlib level
- fix potential memory corruption when fsync fails in the middle
- fix crash in integrity checker
- incremetnal send fix, path mixup for certain unlink/rename
combination
- pass flags to writeback so compressed writes can be throttled
properly
- error handling fixes"
* tag 'for-4.15-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Btrfs: incremental send, fix wrong unlink path after renaming file
btrfs: tree-checker: Fix false panic for sanity test
Btrfs: fix list_add corruption and soft lockups in fsync
btrfs: Fix wild memory access in compression level parser
btrfs: fix deadlock when writing out space cache
btrfs: clear space cache inode generation always
Btrfs: fix reported number of inode blocks after buffered append writes
Btrfs: move definition of the function btrfs_find_new_delalloc_bytes
Btrfs: bail out gracefully rather than BUG_ON
btrfs: dev_alloc_list is not protected by RCU, use normal list_del
btrfs: add missing device::flush_bio puts
btrfs: Fix transaction abort during failure in btrfs_rm_dev_item
Btrfs: add write_flags for compression bio
- Add missing header to mmu_context_mm.h
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAloeqwQACgkQykllyylKDCFodACfQUtkJxW1ulAv+YTlIORxYdgu
KLIAn3XsWAeBtoe1tzr98my2myOdgwCX
=Y9t4
-----END PGP SIGNATURE-----
Merge tag 'microblaze-4.15-rc2' of git://git.monstr.eu/linux-2.6-microblaze
Pull Microblaze fix from Michal Simek:
"Add missing header to mmu_context_mm.h"
* tag 'microblaze-4.15-rc2' of git://git.monstr.eu/linux-2.6-microblaze:
microblaze: add missing include to mmu_context_mm.h
Pull sparc fix from David Miller:
"Sparc T4 and later cpu bootup regression fix"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc64: Fix boot on T4 and later.
Pull networking fixes from David Miller:
1) The forcedeth conversion from pci_*() DMA interfaces to dma_*() ones
missed one spot. From Zhu Yanjun.
2) Missing CRYPTO_SHA256 Kconfig dep in cfg80211, from Johannes Berg.
3) Fix checksum offloading in thunderx driver, from Sunil Goutham.
4) Add SPDX to vm_sockets_diag.h, from Stephen Hemminger.
5) Fix use after free of packet headers in TIPC, from Jon Maloy.
6) "sizeof(ptr)" vs "sizeof(*ptr)" bug in i40e, from Gustavo A R Silva.
7) Tunneling fixes in mlxsw driver, from Petr Machata.
8) Fix crash in fanout_demux_rollover() of AF_PACKET, from Mike
Maloney.
9) Fix race in AF_PACKET bind() vs. NETDEV_UP notifier, from Eric
Dumazet.
10) Fix regression in sch_sfq.c due to one of the timer_setup()
conversions. From Paolo Abeni.
11) SCTP does list_for_each_entry() using wrong struct member, fix from
Xin Long.
12) Don't use big endian netlink attribute read for
IFLA_BOND_AD_ACTOR_SYSTEM, it is in cpu endianness. Also from Xin
Long.
13) Fix mis-initialization of q->link.clock in CBQ scheduler, preventing
adding filters there. From Jiri Pirko.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (67 commits)
ethernet: dwmac-stm32: Fix copyright
net: via: via-rhine: use %p to format void * address instead of %x
net: ethernet: xilinx: Mark XILINX_LL_TEMAC broken on 64-bit
myri10ge: Update MAINTAINERS
net: sched: cbq: create block for q->link.block
atm: suni: remove extraneous space to fix indentation
atm: lanai: use %p to format kernel addresses instead of %x
VSOCK: Don't set sk_state to TCP_CLOSE before testing it
atm: fore200e: use %pK to format kernel addresses instead of %x
ambassador: fix incorrect indentation of assignment statement
vxlan: use __be32 type for the param vni in __vxlan_fdb_delete
bonding: use nla_get_u64 to extract the value for IFLA_BOND_AD_ACTOR_SYSTEM
sctp: use right member as the param of list_for_each_entry
sch_sfq: fix null pointer dereference at timer expiration
cls_bpf: don't decrement net's refcount when offload fails
net/packet: fix a race in packet_bind() and packet_notifier()
packet: fix crash in fanout_demux_rollover()
sctp: remove extern from stream sched
sctp: force the params with right types for sctp csum apis
sctp: force SCTP_ERROR_INV_STRM with __u32 when calling sctp_chunk_fail
...
If we don't put the NG4fls.o object into the same part of
the link as the generic sparc64 objects for fls() and __fls()
then the relocation in the branch we use for patching will
not fit.
Move NG4fls.o into lib-y to fix this problem.
Fixes: 46ad8d2d22 ("sparc64: Use sparc optimized fls and __fls for T4 and above")
Signed-off-by: David S. Miller <davem@davemloft.net>
Reported-by: Anatoly Pugachev <matorola@gmail.com>
Tested-by: Anatoly Pugachev <matorola@gmail.com>
Instead, just fall back on the new '%p' behavior which hashes the
pointer.
Otherwise, '%pK' - that was intended to mark a pointer as restricted -
just ends up leaking pointers that a normal '%p' wouldn't leak. Which
just make the whole thing pointless.
I suspect we should actually get rid of '%pK' entirely, and make it just
work as '%p' regardless, but this is the minimal obvious fix. People
who actually use 'kptr_restrict' should weigh in on which behavior they
want.
Cc: Tobin Harding <me@tobin.cc>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The conditional kallsym hex printing used a special fixed-width '%lx'
output (KALLSYM_FMT) in preparation for the hashing of %p, but that
series ended up adding a %px specifier to help with the conversions.
Use it, and avoid the "print pointer as an unsigned long" code.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Here is the patch set that implements hashing of printk specifier
%p. First we have two clean up patches then we do the hashing. Hashing
is done via the SipHash algorithm. The next patch adds printk specifier
%px for printing pointers when we _really_ want to see the address i.e
%px is functionally equivalent to %lx. Final patch in the set fixes
KASAN since we break it by hashing %p.
For the record here is the justification for the series.
Currently there exist approximately 14 000 places in the Kernel where
addresses are being printed using an unadorned %p. This potentially
leaks sensitive information about the Kernel layout in memory. Many of
these calls are stale, instead of fixing every call we hash the address
by default before printing. We then add %px to provide a way to print
the actual address. Although this is achievable using %lx, using %px
will assist us if we ever want to change pointer printing behaviour. %px
is more uniquely grep'able (there are already >50 000 uses of %lx).
The added advantage of hashing %p is that security is now opt-out, if
you _really_ want the address you have to work a little harder and use
%px.
This will of course break some users, forcing code printing needed
addresses to be updated.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
-----BEGIN PGP SIGNATURE-----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=y9zQ
-----END PGP SIGNATURE-----
Merge tag 'printk-hash-pointer-4.15-rc2' of git://github.com/tcharding/linux
Pull printk pointer hashing update from Tobin Harding:
"Here is the patch set that implements hashing of printk specifier %p.
First we have two clean up patches then we do the hashing. Hashing is
done via the SipHash algorithm. The next patch adds printk specifier
%px for printing pointers when we _really_ want to see the address i.e
%px is functionally equivalent to %lx. Final patch in the set fixes
KASAN since we break it by hashing %p.
For the record here is the justification for the series:
Currently there exist approximately 14 000 places in the Kernel
where addresses are being printed using an unadorned %p. This
potentially leaks sensitive information about the Kernel layout in
memory. Many of these calls are stale, instead of fixing every call
we hash the address by default before printing. We then add %px to
provide a way to print the actual address. Although this is
achievable using %lx, using %px will assist us if we ever want to
change pointer printing behaviour. %px is more uniquely grep'able
(there are already >50 000 uses of %lx).
The added advantage of hashing %p is that security is now opt-out,
if you _really_ want the address you have to work a little harder
and use %px.
This will of course break some users, forcing code printing needed
addresses to be updated"
[ I do expect this to be an annoyance, and a number of %px users to be
added for debuggability. But nobody is willing to audit existing %p
users for information leaks, and a number of places really only use
the pointer as an object identifier rather than really 'I need the
address'.
IOW - sorry for the inconvenience, but it's the least inconvenient of
the options. - Linus ]
* tag 'printk-hash-pointer-4.15-rc2' of git://github.com/tcharding/linux:
kasan: use %px to print addresses instead of %p
vsprintf: add printk specifier %px
printk: hash addresses printed with %p
vsprintf: refactor %pK code out of pointer()
docs: correct documentation for %pK
This reverts commit 152e93af3c.
It was a nice cleanup in theory, but as Nicolai Stange points out, we do
need to make the page dirty for the copy-on-write case even when we
didn't end up making it writable, since the dirty bit is what we use to
check that we've gone through a COW cycle.
Reported-by: Michal Hocko <mhocko@kernel.org>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Don't use %x and casting to print out an address, instead use %p
and remove the casting. Cleans up smatch warnings:
drivers/net/ethernet/via/via-rhine.c:998 rhine_init_one_common()
warn: argument 4 to %lx specifier is cast from pointer
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Values assigned to both variable resend_at and ack_at are overwritten
before they can be used.
The correct fix here is to add 'now' to the previously computed value in
resend_at and ack_at.
Addresses-Coverity-ID: 1462262
Addresses-Coverity-ID: 1462263
Addresses-Coverity-ID: 1462264
Fixes: beb8e5e4f3 ("rxrpc: Express protocol timeouts in terms of RTT")
Link: https://marc.info/?i=17004.1511808959%40warthog.procyon.org.uk
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
On 64-bit (e.g. powerpc64/allmodconfig):
drivers/net/ethernet/xilinx/ll_temac_main.c: In function 'temac_start_xmit_done':
drivers/net/ethernet/xilinx/ll_temac_main.c:633:22: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
dev_kfree_skb_irq((struct sk_buff *)cur_p->app4);
^
cdmac_bd.app4 is u32, so it is too small to hold a kernel pointer.
Note that several other fields in struct cdmac_bd are also too small to
hold physical addresses on 64-bit platforms.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Repeat terminal ACKs and now terminal ACKs are now generated from the
connection event processor rather from call handling as this allows us to
discard client call structures as soon as possible and free up the channel
for a follow on call.
However, in ACKs so generated, the additional information trailer is
malformed because the padding that's meant to be in the middle isn't
included in what's transmitted.
Fix it so that the 3 bytes of padding are included in the transmission.
Further, the trailer is misaligned because of the padding, so assigment to
the u16 and u32 fields inside it might cause problems on some arches, so
fix this by breaking the padding and the trailer out of the packed struct.
(This also deals with potential compiler weirdies where some of the nested
structs are packed and some aren't).
The symptoms can be seen in wireshark as terminal DUPLICATE or IDLE ACK
packets in which the Max MTU, Interface MTU and rwind fields have weird
values and the Max Packets field is apparently missing.
Reported-by: Jeffrey Altman <jaltman@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Change the maintainer to Chris Lee who has access to Myricom hardware
and can test/review. Update the website URL.
Signed-off-by: Hyong-Youb Kim <hykim@myri.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pointers printed with %p are now hashed by default. Kasan needs the
actual address. We can use the new printk specifier %px for this
purpose.
Use %px instead of %p to print addresses.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
printk specifier %p now hashes all addresses before printing. Sometimes
we need to see the actual unmodified address. This can be achieved using
%lx but then we face the risk that if in future we want to change the
way the Kernel handles printing of pointers we will have to grep through
the already existent 50 000 %lx call sites. Let's add specifier %px as a
clear, opt-in, way to print a pointer and maintain some level of
isolation from all the other hex integer output within the Kernel.
Add printk specifier %px to print the actual unmodified address.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Currently there exist approximately 14 000 places in the kernel where
addresses are being printed using an unadorned %p. This potentially
leaks sensitive information regarding the Kernel layout in memory. Many
of these calls are stale, instead of fixing every call lets hash the
address by default before printing. This will of course break some
users, forcing code printing needed addresses to be updated.
Code that _really_ needs the address will soon be able to use the new
printk specifier %px to print the address.
For what it's worth, usage of unadorned %p can be broken down as
follows (thanks to Joe Perches).
$ git grep -E '%p[^A-Za-z0-9]' | cut -f1 -d"/" | sort | uniq -c
1084 arch
20 block
10 crypto
32 Documentation
8121 drivers
1221 fs
143 include
101 kernel
69 lib
100 mm
1510 net
40 samples
7 scripts
11 security
166 sound
152 tools
2 virt
Add function ptr_to_id() to map an address to a 32 bit unique
identifier. Hash any unadorned usage of specifier %p and any malformed
specifiers.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
