Presently PAPR doesn't support injecting smart errors on an
NVDIMM. This makes testing the NVDIMM health reporting functionality
difficult as simulating NVDIMM health related events need a hacked up
qemu version.
To solve this problem this patch proposes simulating certain set of
NVDIMM health related events in papr_scm. Specifically 'fatal' health
state and 'dirty' shutdown state. These error can be injected via the
user-space 'ndctl-inject-smart(1)' command. With the proposed patch and
corresponding ndctl patches following command flow is expected:
$ sudo ndctl list -DH -d nmem0
...
"health_state":"ok",
"shutdown_state":"clean",
...
# inject unsafe shutdown and fatal health error
$ sudo ndctl inject-smart nmem0 -Uf
...
"health_state":"fatal",
"shutdown_state":"dirty",
...
# uninject all errors
$ sudo ndctl inject-smart nmem0 -N
...
"health_state":"ok",
"shutdown_state":"clean",
...
The patch adds a new member 'health_bitmap_inject_mask' inside struct
papr_scm_priv which is then bitwise ANDed to the health bitmap fetched from the
hypervisor. The value for 'health_bitmap_inject_mask' is accessible from sysfs
at nmemX/papr/health_bitmap_inject.
A new PDSM named 'SMART_INJECT' is proposed that accepts newly
introduced 'struct nd_papr_pdsm_smart_inject' as payload thats
exchanged between libndctl and papr_scm to indicate the requested
smart-error states.
When the processing the PDSM 'SMART_INJECT', papr_pdsm_smart_inject()
constructs a pair or 'inject_mask' and 'clear_mask' bitmaps from the payload
and bit-blt it to the 'health_bitmap_inject_mask'. This ensures the after being
fetched from the hypervisor, the health_bitmap reflects requested smart-error
states.
Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220124202204.1488346-1-vaibhav@linux.ibm.com
Add some line breaks to better match the file's style, add
some space after comma and fix a couple of misplaced blanks.
Suggested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/973506292d0c7b05c06530c8e11803ce38e5eda2.1644949750.git.christophe.leroy@csgroup.eu
When FL_SAVE_REGS is not set we get here via ftrace_caller()
which doesn't save all registers.
ftrace_caller() explicitely clears regs.msr, so we can rely
on it to know where we come from. We don't expect MSR register
to be 0 at all when involving ftrace.
Fixes: 40b035efe2 ("powerpc/ftrace: Implement CONFIG_DYNAMIC_FTRACE_WITH_ARGS")
Reported-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2f9a7e898c93cc7438ef5ccd47cb9c3a9c5b53ef.1644949750.git.christophe.leroy@csgroup.eu
The function_graph_enter() does not provide any recursion protection.
Add a protection in prepare_ftrace_return() in case
function_graph_enter() calls something that gets
function graph traced.
Fixes: 830213786c ("powerpc/ftrace: directly call of function graph tracer by ftrace caller")
Reported-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/74edf2ff0a60e66b0d9225a137100a86a0557032.1644949750.git.christophe.leroy@csgroup.eu
Also save r1 in ftrace_caller()
r1 is needed during unwinding when the function_graph tracer
is active.
Fixes: 830213786c ("powerpc/ftrace: directly call of function graph tracer by ftrace caller")
Reported-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ff535e86d3a69376a6d89168511d4e403835f18b.1644949750.git.christophe.leroy@csgroup.eu
Currently, `git status` lists the file as untracked by git, so tell git
to ignore it.
Fixes: aa3bc365ee ("powerpc/ps3: Add check for otheros image size")
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Acked-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220214065543.198992-1-pmenzel@molgen.mpg.de
Warnings in assembly must use EMIT_WARN_ENTRY in order to generate
the necessary entry in exception table.
Check in EMIT_BUG_ENTRY that flags don't include BUGFLAG_WARNING.
This change avoids problems like the one fixed by
commit fd1eaaaaa6 ("powerpc/64s: Use EMIT_WARN_ENTRY for SRR debug
warnings").
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/ddcb422102a37eb45f57694c7ef0ec6187964dff.1644742951.git.christophe.leroy@csgroup.eu
Our skiroot_defconfig doesn't enable FTRACE, and so doesn't get
STACKTRACE enabled either. That leads to a build failure since commit
1614b2b11f ("arch: Make ARCH_STACKWALK independent of STACKTRACE")
made stacktrace.c build even when STACKTRACE=n.
arch/powerpc/kernel/stacktrace.c: In function ‘handle_backtrace_ipi’:
arch/powerpc/kernel/stacktrace.c:171:2: error: implicit declaration of function ‘nmi_cpu_backtrace’
171 | nmi_cpu_backtrace(regs);
| ^~~~~~~~~~~~~~~~~
arch/powerpc/kernel/stacktrace.c: In function ‘arch_trigger_cpumask_backtrace’:
arch/powerpc/kernel/stacktrace.c:226:2: error: implicit declaration of function ‘nmi_trigger_cpumask_backtrace’
226 | nmi_trigger_cpumask_backtrace(mask, exclude_self, raise_backtrace_ipi);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This happens because our headers haven't defined
arch_trigger_cpumask_backtrace, which causes lib/nmi_backtrace.c not to
build nmi_cpu_backtrace().
The code in question doesn't actually depend on STACKTRACE=y, that was
just added because arch_trigger_cpumask_backtrace() lived in
stacktrace.c for convenience. So drop the dependency on
CONFIG_STACKTRACE, that causes lib/nmi_backtrace.c to build
nmi_cpu_backtrace() etc. and fixes the build.
Fixes: 1614b2b11f ("arch: Make ARCH_STACKWALK independent of STACKTRACE")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220212111349.2806972-1-mpe@ellerman.id.au
commit: d9c2340052 ("Do not depend on MAX_ORDER when grouping pages by mobility")
introduced pageblock_order which will be used to group pages better.
The kernel now groups pages based on the value of HPAGE_SHIFT. Hence HPAGE_SHIFT
should be set before we call set_pageblock_order.
set_pageblock_order happens early in the boot and default hugetlb page size
should be initialized before that to compute the right pageblock_order value.
Currently, default hugetlbe page size is set via arch_initcalls which happens
late in the boot as shown via the below callstack:
[c000000007383b10] [c000000001289328] hugetlbpage_init+0x2b8/0x2f8
[c000000007383bc0] [c0000000012749e4] do_one_initcall+0x14c/0x320
[c000000007383c90] [c00000000127505c] kernel_init_freeable+0x410/0x4e8
[c000000007383da0] [c000000000012664] kernel_init+0x30/0x15c
[c000000007383e10] [c00000000000cf14] ret_from_kernel_thread+0x5c/0x64
and the pageblock_order initialization is done early during the boot.
[c0000000018bfc80] [c0000000012ae120] set_pageblock_order+0x50/0x64
[c0000000018bfca0] [c0000000012b3d94] sparse_init+0x188/0x268
[c0000000018bfd60] [c000000001288bfc] initmem_init+0x28c/0x328
[c0000000018bfe50] [c00000000127b370] setup_arch+0x410/0x480
[c0000000018bfed0] [c00000000127401c] start_kernel+0xb8/0x934
[c0000000018bff90] [c00000000000d984] start_here_common+0x1c/0x98
delaying default hugetlb page size initialization implies the kernel will
initialize pageblock_order to (MAX_ORDER - 1) which is not an optimal
value for mobility grouping. IIUC we always had this issue. But it was not
a problem for hash translation mode because (MAX_ORDER - 1) is the same as
HUGETLB_PAGE_ORDER (8) in the case of hash (16MB). With radix,
HUGETLB_PAGE_ORDER will be 5 (2M size) and hence pageblock_order should be
5 instead of 8.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220211065215.101767-1-aneesh.kumar@linux.ibm.com
While debugging an issue, we wanted to check whether the arch specific
kernel memmove implementation is correct.
This selftest could help test that.
Suggested-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Suggested-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/57242c1fe7aba6b7f0fcd0490303bfd5f222ee00.1631512686.git.riteshh@linux.ibm.com
pseries_devicetree_update() has only one call site, in the same file in
which it is defined. Make it static.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220207221247.354454-1-nathanl@linux.ibm.com
cvdso_call_time macro is very similar to cvdso_call macro.
Add a call_time argument to cvdso_call which is 0 by default
and set to 1 when using cvdso_call to call __c_kernel_time().
Return returned value as is with CR[SO] cleared when it is used
for time().
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/837a260ad86fc1ce297a562c2117fd69be5f7b5c.1642782130.git.christophe.leroy@csgroup.eu
In order to merge vdso32 and vdso64 build in following patch, rework
Makefile is order to add -32 suffix to VDSO32 object files.
Also change sigtramp.S to sigtramp32.S as VDSO64 sigtramp.S is too
different to be squashed into VDSO32 sigtramp.S at the first place.
gen_vdso_offsets.sh also becomes gen_vdso32_offsets.sh
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/0c421b704a57b228e75a891512568339c53667ad.1642782130.git.christophe.leroy@csgroup.eu
VDSO64 cacheflush.S datapage.S gettimeofday.S and vgettimeofday.c
are very similar to their VDSO32 counterpart.
VDSO32 counterpart is already more complete than the VDSO64 version
as it supports both PPC32 vdso and 32 bits VDSO for PPC64.
Use compat macros wherever necessary in PPC32 files
so that they can also be used to build VDSO64.
vdso64/note.S is already a link to vdso32/note.S so
no change is required.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c2cbb8f046b7efc251053521dc39b752795e26b7.1642782130.git.christophe.leroy@csgroup.eu
The book3s/32 MMU doesn't support per page execution protection and
doesn't support RO protection for kernel pages.
However, on the 603 which implements software loaded TLBs, execution
protection is honored by the TLB Miss handler which doesn't load
Instruction TLB for non executable pages. And RO protection is
honored by clearing the C bit for RO pages, leading to DSI.
So on the 603, STRICT_MODULE_RWX is possible without much effort.
Don't disable STRICT_MODULE_RWX on book3s/32 and print a warning
in case STRICT_MODULE_RWX has been selected and the platform has
a Hardware HASH MMU.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1e6162f334167e75f1140082932e3a354b16daba.1642413973.git.christophe.leroy@csgroup.eu
BPF_REG_5, BPF_REG_AX and TMP_REG are mapped on non volatile registers
because there are not enough volatile registers, but they don't need
to be preserved on function calls.
So when some volatile registers become available, those registers can
always be reallocated regardless of whether SEEN_FUNC is set or not.
Suggested-by: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b04c246874b716911139c04bc004b3b14eed07ef.1641817763.git.christophe.leroy@csgroup.eu
set_memory_attr() was implemented by commit 4d1755b6a7 ("powerpc/mm:
implement set_memory_attr()") because the set_memory_xx() couldn't
be used at that time to modify memory "on the fly" as explained it
the commit.
But set_memory_attr() uses set_pte_at() which leads to warnings when
CONFIG_DEBUG_VM is selected, because set_pte_at() is unexpected for
updating existing page table entries.
The check could be bypassed by using __set_pte_at() instead,
as it was the case before commit c988cfd38e ("powerpc/32:
use set_memory_attr()") but since commit 9f7853d760 ("powerpc/mm:
Fix set_memory_*() against concurrent accesses") it is now possible
to use set_memory_xx() functions to update page table entries
"on the fly" because the update is now atomic.
For DEBUG_PAGEALLOC we need to clear and set back _PAGE_PRESENT.
Add set_memory_np() and set_memory_p() for that.
Replace all uses of set_memory_attr() by the relevant set_memory_xx()
and remove set_memory_attr().
Fixes: c988cfd38e ("powerpc/32: use set_memory_attr()")
Cc: stable@vger.kernel.org
Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Maxime Bizon <mbizon@freebox.fr>
Reviewed-by: Russell Currey <ruscur@russell.cc>
Depends-on: 9f7853d760 ("powerpc/mm: Fix set_memory_*() against concurrent accesses")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/cda2b44b55c96f9ac69fa92e68c01084ec9495c5.1640344012.git.christophe.leroy@csgroup.eu
Commit 1f9ad21c3b ("powerpc/mm: Implement set_memory() routines")
included a spin_lock() to change_page_attr() in order to
safely perform the three step operations. But then
commit 9f7853d760 ("powerpc/mm: Fix set_memory_*() against
concurrent accesses") modify it to use pte_update() and do
the operation safely against concurrent access.
In the meantime, Maxime reported some spinlock recursion.
[ 15.351649] BUG: spinlock recursion on CPU#0, kworker/0:2/217
[ 15.357540] lock: init_mm+0x3c/0x420, .magic: dead4ead, .owner: kworker/0:2/217, .owner_cpu: 0
[ 15.366563] CPU: 0 PID: 217 Comm: kworker/0:2 Not tainted 5.15.0+ #523
[ 15.373350] Workqueue: events do_free_init
[ 15.377615] Call Trace:
[ 15.380232] [e4105ac0] [800946a4] do_raw_spin_lock+0xf8/0x120 (unreliable)
[ 15.387340] [e4105ae0] [8001f4ec] change_page_attr+0x40/0x1d4
[ 15.393413] [e4105b10] [801424e0] __apply_to_page_range+0x164/0x310
[ 15.400009] [e4105b60] [80169620] free_pcp_prepare+0x1e4/0x4a0
[ 15.406045] [e4105ba0] [8016c5a0] free_unref_page+0x40/0x2b8
[ 15.411979] [e4105be0] [8018724c] kasan_depopulate_vmalloc_pte+0x6c/0x94
[ 15.418989] [e4105c00] [801424e0] __apply_to_page_range+0x164/0x310
[ 15.425451] [e4105c50] [80187834] kasan_release_vmalloc+0xbc/0x134
[ 15.431898] [e4105c70] [8015f7a8] __purge_vmap_area_lazy+0x4e4/0xdd8
[ 15.438560] [e4105d30] [80160d10] _vm_unmap_aliases.part.0+0x17c/0x24c
[ 15.445283] [e4105d60] [801642d0] __vunmap+0x2f0/0x5c8
[ 15.450684] [e4105db0] [800e32d0] do_free_init+0x68/0x94
[ 15.456181] [e4105dd0] [8005d094] process_one_work+0x4bc/0x7b8
[ 15.462283] [e4105e90] [8005d614] worker_thread+0x284/0x6e8
[ 15.468227] [e4105f00] [8006aaec] kthread+0x1f0/0x210
[ 15.473489] [e4105f40] [80017148] ret_from_kernel_thread+0x14/0x1c
Remove the read / modify / write sequence to make the operation atomic
and remove the spin_lock() in change_page_attr().
To do the operation atomically, we can't use pte modification helpers
anymore. Because all platforms have different combination of bits, it
is not easy to use those bits directly. But all have the
_PAGE_KERNEL_{RO/ROX/RW/RWX} set of flags. All we need it to compare
two sets to know which bits are set or cleared.
For instance, by comparing _PAGE_KERNEL_ROX and _PAGE_KERNEL_RO you
know which bit gets cleared and which bit get set when changing exec
permission.
Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/all/20211212112152.GA27070@sakura/
Link: https://lore.kernel.org/r/43c3c76a1175ae6dc1a3d3b5c3f7ecb48f683eea.1640344012.git.christophe.leroy@csgroup.eu
Modify function graph tracer to be handled directly by the standard
ftrace caller.
This is made possible as powerpc now supports
CONFIG_DYNAMIC_FTRACE_WITH_ARGS.
This change simplifies the call of function graph ftrace.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/04d196585ff81bde06a000bd9c633a33a5b21130.1640017960.git.christophe.leroy@csgroup.eu
ftrace_enable_ftrace_graph_caller() and
ftrace_disable_ftrace_graph_caller() have common code.
They will have even more common code after following patch.
Refactor into a single ftrace_modify_ftrace_graph_caller() function.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f37785a531f1a8f201e1b3da45997a5c77e9d820.1640017960.git.christophe.leroy@csgroup.eu
Implement CONFIG_DYNAMIC_FTRACE_WITH_ARGS. It accelerates the call
of livepatching.
Also note that powerpc being the last one to convert to
CONFIG_DYNAMIC_FTRACE_WITH_ARGS, it will now be possible to remove
klp_arch_set_pc() on all architectures.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5831f711a778fcd6eb51eb5898f1faae4378b35b.1640017960.git.christophe.leroy@csgroup.eu
PPC64 needs some special logic to properly set up the TOC.
See commit 85baa09549 ("powerpc/livepatch: Add live patching support
on ppc64le") for details.
PPC32 doesn't have TOC so it doesn't need that logic, so adding
LIVEPATCH support is straight forward.
Add CONFIG_LIVEPATCH_64 and move livepatch stack logic into that item.
Livepatch sample modules all work.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/63cb094125b6a6038c65eeac2abaabbabe63addd.1640017960.git.christophe.leroy@csgroup.eu
Livepatching a loaded module involves applying relocations through
apply_relocate_add(), which attempts to write to read-only memory when
CONFIG_STRICT_MODULE_RWX=y.
R_PPC_ADDR16_LO, R_PPC_ADDR16_HI, R_PPC_ADDR16_HA and R_PPC_REL24 are
the types generated by the kpatch-build userspace tool or klp-convert
kernel tree observed applying a relocation to a post-init module.
Use patch_instruction() to patch those relocations.
Commit 8734b41b3e ("powerpc/module_64: Fix livepatching for
RO modules") did similar change in module_64.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/d5697157cb7dba3927e19aa17c915a83bc550bb2.1640017960.git.christophe.leroy@csgroup.eu
On large config LPARs (having 192 and more cores), Linux fails to boot
due to insufficient memory in the first memblock. It is due to the
memory reservation for the crash kernel which starts at 128MB offset of
the first memblock. This memory reservation for the crash kernel doesn't
leave enough space in the first memblock to accommodate other essential
system resources.
The crash kernel start address was set to 128MB offset by default to
ensure that the crash kernel get some memory below the RMA region which
is used to be of size 256MB. But given that the RMA region size can be
512MB or more, setting the crash kernel offset to mid of RMA size will
leave enough space for the kernel to allocate memory for other system
resources.
Since the above crash kernel offset change is only applicable to the LPAR
platform, the LPAR feature detection is pushed before the crash kernel
reservation. The rest of LPAR specific initialization will still
be done during pseries_probe_fw_features as usual.
This patch is dependent on changes to paca allocation for boot CPU. It
expect boot CPU to discover 1T segment support which is introduced by
the patch posted here:
https://lists.ozlabs.org/pipermail/linuxppc-dev/2022-January/239175.html
Reported-by: Abdul haleem <abdhalee@linux.vnet.ibm.com>
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220204085601.107257-1-sourabhjain@linux.ibm.com
arch/powerpc/include/asm/nohash/{32/64}/pgtable.h has
#define __HAVE_ARCH_PTE_SAME
#define pte_same(A,B) ((pte_val(A) ^ pte_val(B)) == 0)
include/linux/pgtable.h has
#ifndef __HAVE_ARCH_PTE_SAME
static inline int pte_same(pte_t pte_a, pte_t pte_b)
{
return pte_val(pte_a) == pte_val(pte_b);
}
#endif
Remove the powerpc version which is similar to the generic one.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/83c97bd58a3596ef1b0ff28b1e41fd492d005520.1643616989.git.christophe.leroy@csgroup.eu
On book3s/32 MMU, PP bits don't offer kernel RO protection,
kernel pages are always RW.
However, on the 603 a page fault is always generated when the
C bit (change bit = dirty bit) is not set.
Enforce kernel RO protection by clearing C bit in TLB miss
handler when the page doesn't have _PAGE_RW flag.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/bbb13848ff0100a76ee9ea95118058c30ae95f2c.1643613343.git.christophe.leroy@csgroup.eu
'xive_irq_bitmap_add()' can return -ENOMEM.
In this case, we should free the memory already allocated and return
'false' to the caller.
Also add an error path which undoes the 'tima = ioremap(...)'
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/564998101804886b151235c8a9f93020923bfd2c.1643718324.git.christophe.jaillet@wanadoo.fr
Trace IMC (In-Memory collection counters) in powerpc is useful for
application level profiling.
For trace_imc, presently task context (task_ctx_nr) is set to
perf_hw_context. But perf_hw_context should only be used for CPU PMU.
See commit 2665784850 ("perf/core: Verify we have a single
perf_hw_context PMU").
So for trace_imc, even though it is per thread PMU, it is preferred to
use sw_context in order to be able to do application level monitoring.
Hence change the task_ctx_nr to use perf_sw_context.
Fixes: 012ae24484 ("powerpc/perf: Trace imc PMU functions")
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
[mpe: Update subject & incorporate notes into change log, reflow comment]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220202041837.65968-1-atrajeev@linux.vnet.ibm.com
