[ Upstream commit 3f965021c8 ]
Since, well, forever, the Linux NFS server's nfsd_commit() function
has returned nfserr_inval when the passed-in byte range arguments
were non-sensical.
However, according to RFC 1813 section 3.3.21, NFSv3 COMMIT requests
are permitted to return only the following non-zero status codes:
NFS3ERR_IO
NFS3ERR_STALE
NFS3ERR_BADHANDLE
NFS3ERR_SERVERFAULT
NFS3ERR_INVAL is not included in that list. Likewise, NFS4ERR_INVAL
is not listed in the COMMIT row of Table 6 in RFC 8881.
RFC 7530 does permit COMMIT to return NFS4ERR_INVAL, but does not
specify when it can or should be used.
Instead of dropping or failing a COMMIT request in a byte range that
is not supported, turn it into a valid request by treating one or
both arguments as zero. Offset zero means start-of-file, count zero
means until-end-of-file, so we only ever extend the commit range.
NFS servers are always allowed to commit more and sooner than
requested.
The range check is no longer bounded by NFS_OFFSET_MAX, but rather
by the value that is returned in the maxfilesize field of the NFSv3
FSINFO procedure or the NFSv4 maxfilesize file attribute.
Note that this change results in a new pynfs failure:
CMT4 st_commit.testCommitOverflow : RUNNING
CMT4 st_commit.testCommitOverflow : FAILURE
COMMIT with offset + count overflow should return
NFS4ERR_INVAL, instead got NFS4_OK
IMO the test is not correct as written: RFC 8881 does not allow the
COMMIT operation to return NFS4ERR_INVAL.
Reported-by: Dan Aloni <dan.aloni@vastdata.com>
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Bruce Fields <bfields@fieldses.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c445a0e72 ]
Since this pointer is used repeatedly, move it to a stack variable.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 868f9f2f8e upstream.
A regression has been reported by Nicolas Boichat, found while using the
copy_file_range syscall to copy a tracefs file.
Before commit 5dae222a5f ("vfs: allow copy_file_range to copy across
devices") the kernel would return -EXDEV to userspace when trying to
copy a file across different filesystems. After this commit, the
syscall doesn't fail anymore and instead returns zero (zero bytes
copied), as this file's content is generated on-the-fly and thus reports
a size of zero.
Another regression has been reported by He Zhe - the assertion of
WARN_ON_ONCE(ret == -EOPNOTSUPP) can be triggered from userspace when
copying from a sysfs file whose read operation may return -EOPNOTSUPP.
Since we do not have test coverage for copy_file_range() between any two
types of filesystems, the best way to avoid these sort of issues in the
future is for the kernel to be more picky about filesystems that are
allowed to do copy_file_range().
This patch restores some cross-filesystem copy restrictions that existed
prior to commit 5dae222a5f ("vfs: allow copy_file_range to copy across
devices"), namely, cross-sb copy is not allowed for filesystems that do
not implement ->copy_file_range().
Filesystems that do implement ->copy_file_range() have full control of
the result - if this method returns an error, the error is returned to
the user. Before this change this was only true for fs that did not
implement the ->remap_file_range() operation (i.e. nfsv3).
Filesystems that do not implement ->copy_file_range() still fall-back to
the generic_copy_file_range() implementation when the copy is within the
same sb. This helps the kernel can maintain a more consistent story
about which filesystems support copy_file_range().
nfsd and ksmbd servers are modified to fall-back to the
generic_copy_file_range() implementation in case vfs_copy_file_range()
fails with -EOPNOTSUPP or -EXDEV, which preserves behavior of
server-side-copy.
fall-back to generic_copy_file_range() is not implemented for the smb
operation FSCTL_DUPLICATE_EXTENTS_TO_FILE, which is arguably a correct
change of behavior.
Fixes: 5dae222a5f ("vfs: allow copy_file_range to copy across devices")
Link: https://lore.kernel.org/linux-fsdevel/20210212044405.4120619-1-drinkcat@chromium.org/
Link: https://lore.kernel.org/linux-fsdevel/CANMq1KDZuxir2LM5jOTm0xx+BnvW=ZmpsG47CyHFJwnw7zSX6Q@mail.gmail.com/
Link: https://lore.kernel.org/linux-fsdevel/20210126135012.1.If45b7cdc3ff707bc1efa17f5366057d60603c45f@changeid/
Link: https://lore.kernel.org/linux-fsdevel/20210630161320.29006-1-lhenriques@suse.de/
Reported-by: Nicolas Boichat <drinkcat@chromium.org>
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Luis Henriques <lhenriques@suse.de>
Fixes: 64bf5ff58d ("vfs: no fallback for ->copy_file_range")
Link: https://lore.kernel.org/linux-fsdevel/20f17f64-88cb-4e80-07c1-85cb96c83619@windriver.com/
Reported-by: He Zhe <zhe.he@windriver.com>
Tested-by: Namjae Jeon <linkinjeon@kernel.org>
Tested-by: Luis Henriques <lhenriques@suse.de>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8a9ffb8c85 upstream.
commit 555dbf1a9a ("nfsd: Replace use of rwsem with errseq_t")
incidentally broke translation of -EINVAL to nfserr_notsupp.
The patch restores that.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Fixes: 555dbf1a9a ("nfsd: Replace use of rwsem with errseq_t")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bb49e9e730 upstream.
Multiple places open-code the same check to determine whether a given
mount is idmapped. Introduce a simple helper function that can be used
instead. This allows us to get rid of the fragile open-coding. We will
later change the check that is used to determine whether a given mount
is idmapped. Introducing a helper allows us to do this in a single
place instead of doing it for multiple places.
Link: https://lore.kernel.org/r/20211123114227.3124056-2-brauner@kernel.org (v1)
Link: https://lore.kernel.org/r/20211130121032.3753852-2-brauner@kernel.org (v2)
Link: https://lore.kernel.org/r/20211203111707.3901969-2-brauner@kernel.org
Cc: Seth Forshee <sforshee@digitalocean.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
CC: linux-fsdevel@vger.kernel.org
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Seth Forshee <sforshee@digitalocean.com>
Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 555dbf1a9a upstream.
The nfsd_file nf_rwsem is currently being used to separate file write
and commit instances to ensure that we catch errors and apply them to
the correct write/commit.
We can improve scalability at the expense of a little accuracy (some
extra false positives) by replacing the nf_rwsem with more careful
use of the errseq_t mechanism to track errors across the different
operations.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
[ cel: rebased on zero-verifier fix ]
Signed-off-by: Leah Rumancik <leah.rumancik@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit fd5e363eac ]
Upon nfsd shutdown any pending DRC cache is freed. DRC cache use is
tracked via a percpu counter. In the current code the percpu counter
is destroyed before. If any pending cache is still present,
percpu_counter_add is called with a percpu counter==NULL. This causes
a kernel crash.
The solution is to destroy the percpu counter after the cache is freed.
Fixes: e567b98ce9 (“nfsd: protect concurrent access to nfsd stats counters”)
Signed-off-by: Julian Schroeder <jumaco@amazon.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ce3c4ad7f4 upstream.
nfsd4_release_lockowner() holds clp->cl_lock when it calls
check_for_locks(). However, check_for_locks() calls nfsd_file_get()
/ nfsd_file_put() to access the backing inode's flc_posix list, and
nfsd_file_put() can sleep if the inode was recently removed.
Let's instead rely on the stateowner's reference count to gate
whether the release is permitted. This should be a reliable
indication of locks-in-use since file lock operations and
->lm_get_owner take appropriate references, which are released
appropriately when file locks are removed.
Reported-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 50719bf344 ]
These have been incorrect since the function was introduced.
A proper kerneldoc comment is added since this function, though
static, is part of an external interface.
Reported-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d2eeafecd ]
The nfsd file cache table can be pretty large and its allocation
may require as many as 80 contigious pages.
Employ the same fix that was employed for similar issue that was
reported for the reply cache hash table allocation several years ago
by commit 8f97514b42 ("nfsd: more robust allocation failure handling
in nfsd_reply_cache_init").
Fixes: 65294c1f2c ("nfsd: add a new struct file caching facility to nfsd")
Link: https://lore.kernel.org/linux-nfs/e3cdaeec85a6cfec980e87fc294327c0381c1778.camel@kernel.org/
Suggested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 184416d4b9 upstream.
Smatch complains:
fs/nfsd/nfsxdr.c:341 nfssvc_decode_writeargs()
warn: no lower bound on 'args->len'
Change the type to unsigned to prevent this issue.
Cc: stable@vger.kernel.org
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 074b07d94e ]
RTM says "If the special ONE stateid is passed to
nfs4_preprocess_stateid_op(), it returns status=0 but does not set
*cstid. nfsd4_copy_notify() depends on stid being set if status=0, and
thus can crash if the client sends the right COPY_NOTIFY RPC."
RFC 7862 says "The cna_src_stateid MUST refer to either open or locking
states provided earlier by the server. If it is invalid, then the
operation MUST fail."
The RFC doesn't specify an error, and the choice doesn't matter much as
this is clearly illegal client behavior, but bad_stateid seems
reasonable.
Simplest is just to guarantee that nfs4_preprocess_stateid_op, called
with non-NULL cstid, errors out if it can't return a stateid.
Reported-by: rtm@csail.mit.edu
Fixes: 624322f1ad ("NFSD add COPY_NOTIFY operation")
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Olga Kornievskaia <kolga@netapp.com>
Tested-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 58f258f652 ]
On the wire, I observed NFSv4 OPEN(CREATE) operations sometimes
returning a reasonable-looking value in the cinfo.before field and
zero in the cinfo.after field.
RFC 8881 Section 10.8.1 says:
> When a client is making changes to a given directory, it needs to
> determine whether there have been changes made to the directory by
> other clients. It does this by using the change attribute as
> reported before and after the directory operation in the associated
> change_info4 value returned for the operation.
and
> ... The post-operation change
> value needs to be saved as the basis for future change_info4
> comparisons.
A good quality client implementation therefore saves the zero
cinfo.after value. During a subsequent OPEN operation, it will
receive a different non-zero value in the cinfo.before field for
that directory, and it will incorrectly believe the directory has
changed, triggering an undesirable directory cache invalidation.
There are filesystem types where fs_supports_change_attribute()
returns false, tmpfs being one. On NFSv4 mounts, this means the
fh_getattr() call site in fill_pre_wcc() and fill_post_wcc() is
never invoked. Subsequently, nfsd4_change_attribute() is invoked
with an uninitialized @stat argument.
In fill_pre_wcc(), @stat contains stale stack garbage, which is
then placed on the wire. In fill_post_wcc(), ->fh_post_wc is all
zeroes, so zero is placed on the wire. Both of these values are
meaningless.
This fix can be applied immediately to stable kernels. Once there
are more regression tests in this area, this optimization can be
attempted again.
Fixes: 428a23d2bf ("nfsd: skip some unnecessary stats in the v4 case")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f11ad7aa65 ]
RFC 8881 explains the purpose of the write verifier this way:
> The final portion of the result is the field writeverf. This field
> is the write verifier and is a cookie that the client can use to
> determine whether a server has changed instance state (e.g., server
> restart) between a call to WRITE and a subsequent call to either
> WRITE or COMMIT.
But then it says:
> This cookie MUST be unchanged during a single instance of the
> NFSv4.1 server and MUST be unique between instances of the NFSv4.1
> server. If the cookie changes, then the client MUST assume that
> any data written with an UNSTABLE4 value for committed and an old
> writeverf in the reply has been lost and will need to be
> recovered.
RFC 1813 has similar language for NFSv3. NFSv2 does not have a write
verifier since it doesn't implement the COMMIT procedure.
Since commit 19e0663ff9 ("nfsd: Ensure sampling of the write
verifier is atomic with the write"), the Linux NFS server has
returned a boot-time-based verifier for UNSTABLE WRITEs, but a zero
verifier for FILE_SYNC and DATA_SYNC WRITEs. FILE_SYNC and DATA_SYNC
WRITEs are not followed up with a COMMIT, so there's no need for
clients to compare verifiers for stable writes.
However, by returning a different verifier for stable and unstable
writes, the above commit puts the Linux NFS server a step farther
out of compliance with the first MUST above. At least one NFS client
(FreeBSD) noticed the difference, making this a potential
regression.
Reported-by: Rick Macklem <rmacklem@uoguelph.ca>
Link: https://lore.kernel.org/linux-nfs/YQXPR0101MB096857EEACF04A6DF1FC6D9BDD749@YQXPR0101MB0968.CANPRD01.PROD.OUTLOOK.COM/T/
Fixes: 19e0663ff9 ("nfsd: Ensure sampling of the write verifier is atomic with the write")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a2f774424 ]
The Linux NFS server currently responds to a zero-length NFSv3 WRITE
request with NFS3ERR_IO. It responds to a zero-length NFSv4 WRITE
with NFS4_OK and count of zero.
RFC 1813 says of the WRITE procedure's @count argument:
count
The number of bytes of data to be written. If count is
0, the WRITE will succeed and return a count of 0,
barring errors due to permissions checking.
RFC 8881 has similar language for NFSv4, though NFSv4 removed the
explicit @count argument because that value is already contained in
the opaque payload array.
The synthetic client pynfs's WRT4 and WRT15 tests do emit zero-
length WRITEs to exercise this spec requirement. Commit fdec6114ee
("nfsd4: zero-length WRITE should succeed") addressed the same
problem there with the same fix.
But interestingly the Linux NFS client does not appear to emit zero-
length WRITEs, instead squelching them. I'm not aware of a test that
can generate such WRITEs for NFSv3, so I wrote a naive C program to
generate a zero-length WRITE and test this fix.
Fixes: 8154ef2776 ("NFSD: Clean up legacy NFS WRITE argument XDR decoders")
Reported-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dae9a6cab8 ]
Refactor.
Now that the NFSv2 and NFSv3 XDR decoders have been converted to
use xdr_streams, the WRITE decoder functions can use
xdr_stream_subsegment() to extract the WRITE payload into its own
xdr_buf, just as the NFSv4 WRITE XDR decoder currently does.
That makes it possible to pass the first kvec, pages array + length,
page_base, and total payload length via a single function parameter.
The payload's page_base is not yet assigned or used, but will be in
subsequent patches.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 0cb4d23ae0 upstream.
Dan Aloni reports:
> Due to commit 8cfb901528 ("NFS: Always provide aligned buffers to
> the RPC read layers") on the client, a read of 0xfff is aligned up
> to server rsize of 0x1000.
>
> As a result, in a test where the server has a file of size
> 0x7fffffffffffffff, and the client tries to read from the offset
> 0x7ffffffffffff000, the read causes loff_t overflow in the server
> and it returns an NFS code of EINVAL to the client. The client as
> a result indefinitely retries the request.
The Linux NFS client does not handle NFS?ERR_INVAL, even though all
NFS specifications permit servers to return that status code for a
READ.
Instead of NFS?ERR_INVAL, have out-of-range READ requests succeed
and return a short result. Set the EOF flag in the result to prevent
the client from retrying the READ request. This behavior appears to
be consistent with Solaris NFS servers.
Note that NFSv3 and NFSv4 use u64 offset values on the wire. These
must be converted to loff_t internally before use -- an implicit
type cast is not adequate for this purpose. Otherwise VFS checks
against sb->s_maxbytes do not work properly.
Reported-by: Dan Aloni <dan.aloni@vastdata.com>
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6a4d333d54 upstream.
NFSv3 and NFSv4 use u64 offset values on the wire. Record these values
verbatim without the implicit type case to loff_t.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6260d9a56a upstream.
Ensure that a client cannot specify a WRITE range that falls in a
byte range outside what the kernel's internal types (such as loff_t,
which is signed) can represent. The kiocb iterators, invoked in
nfsd_vfs_write(), should properly limit write operations to within
the underlying file system's s_maxbytes.
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e6faac3f58 upstream.
iattr::ia_size is a loff_t, which is a signed 64-bit type. NFSv3 and
NFSv4 both define file size as an unsigned 64-bit type. Thus there
is a range of valid file size values an NFS client can send that is
already larger than Linux can handle.
Currently decode_fattr4() dumps a full u64 value into ia_size. If
that value happens to be larger than S64_MAX, then ia_size
underflows. I'm about to fix up the NFSv3 behavior as well, so let's
catch the underflow in the common code path: nfsd_setattr().
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a648fdeb7c upstream.
iattr::ia_size is a loff_t, so these NFSv3 procedures must be
careful to deal with incoming client size values that are larger
than s64_max without corrupting the value.
Silently capping the value results in storing a different value
than the client passed in which is unexpected behavior, so remove
the min_t() check in decode_sattr3().
Note that RFC 1813 permits only the WRITE procedure to return
NFS3ERR_FBIG. We believe that NFSv3 reference implementations
also return NFS3ERR_FBIG when ia_size is too large.
Cc: stable@vger.kernel.org
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ab451ea952 upstream.
From RFC 7530 Section 16.34.5:
o The server has not recorded an unconfirmed { v, x, c, *, * } and
has recorded a confirmed { v, x, c, *, s }. If the principals of
the record and of SETCLIENTID_CONFIRM do not match, the server
returns NFS4ERR_CLID_INUSE without removing any relevant leased
client state, and without changing recorded callback and
callback_ident values for client { x }.
The current code intends to do what the spec describes above but
it forgot to set 'old' to NULL resulting to the confirmed client
to be expired.
Fixes: 2b63482185 ("nfsd: fix clid_inuse on mount with security change")
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Bruce Fields <bfields@fieldses.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 29044dae2e upstream.
Commit 49246466a9 ("fsnotify: move fsnotify_nameremove() hook out of
d_delete()") moved the fsnotify delete hook before d_delete() so fsnotify
will have access to a positive dentry.
This allowed a race where opening the deleted file via cached dentry
is now possible after receiving the IN_DELETE event.
To fix the regression in pseudo filesystems, convert d_delete() calls
to d_drop() (see commit 46c46f8df9 ("devpts_pty_kill(): don't bother
with d_delete()") and move the fsnotify hook after d_drop().
Add a missing fsnotify_unlink() hook in nfsdfs that was found during
the audit of fsnotify hooks in pseudo filesystems.
Note that the fsnotify hooks in simple_recursive_removal() follow
d_invalidate(), so they require no change.
Link: https://lore.kernel.org/r/20220120215305.282577-2-amir73il@gmail.com
Reported-by: Ivan Delalande <colona@arista.com>
Link: https://lore.kernel.org/linux-fsdevel/YeNyzoDM5hP5LtGW@visor/
Fixes: 49246466a9 ("fsnotify: move fsnotify_nameremove() hook out of d_delete()")
Cc: stable@vger.kernel.org # v5.3+
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 53b1119a6e upstream.
If a client sends a READDIR count argument that is too small (say,
zero), then the buffer size calculation in the new init_dirlist
helper functions results in an underflow, allowing the XDR stream
functions to write beyond the actual buffer.
This calculation has always been suspect. NFSD has never sanity-
checked the READDIR count argument, but the old entry encoders
managed the problem correctly.
With the commits below, entry encoding changed, exposing the
underflow to the pointer arithmetic in xdr_reserve_space().
Modern NFS clients attempt to retrieve as much data as possible
for each READDIR request. Also, we have no unit tests that
exercise the behavior of READDIR at the lower bound of @count
values. Thus this case was missed during testing.
Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Fixes: f5dcccd647 ("NFSD: Update the NFSv2 READDIR entry encoder to use struct xdr_stream")
Fixes: 7f87fc2d34 ("NFSD: Update NFSv3 READDIR entry encoders to use struct xdr_stream")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 548ec0805c upstream.
A delegation break could arrive as soon as we've called vfs_setlease. A
delegation break runs a callback which immediately (in
nfsd4_cb_recall_prepare) adds the delegation to del_recall_lru. If we
then exit nfs4_set_delegation without hashing the delegation, it will be
freed as soon as the callback is done with it, without ever being
removed from del_recall_lru.
Symptoms show up later as use-after-free or list corruption warnings,
usually in the laundromat thread.
I suspect aba2072f45 "nfsd: grant read delegations to clients holding
writes" made this bug easier to hit, but I looked as far back as v3.0
and it looks to me it already had the same problem. So I'm not sure
where the bug was introduced; it may have been there from the beginning.
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c0019b7db1 ]
rtm@csail.mit.edu reports:
> nfsd4_decode_bitmap4() will write beyond bmval[bmlen-1] if the RPC
> directs it to do so. This can cause nfsd4_decode_state_protect4_a()
> to write client-supplied data beyond the end of
> nfsd4_exchange_id.spo_must_allow[] when called by
> nfsd4_decode_exchange_id().
Rewrite the loops so nfsd4_decode_bitmap() cannot iterate beyond
@bmlen.
Reported by: rtm@csail.mit.edu
Fixes: d1c263a031 ("NFSD: Replace READ* macros in nfsd4_decode_fattr()")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
If nfsd has existing listening sockets without any processes, then an error
returned from svc_create_xprt() for an additional transport will remove
those existing listeners. We're seeing this in practice when userspace
attempts to create rpcrdma transports without having the rpcrdma modules
present before creating nfsd kernel processes. Fix this by checking for
existing sockets before calling nfsd_destroy().
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
RFC3530 notes that the 'dircount' field may be zero, in which case the
recommendation is to ignore it, and only enforce the 'maxcount' field.
In RFC5661, this recommendation to ignore a zero valued field becomes a
requirement.
Fixes: aee3776441 ("nfsd4: fix rd_dircount enforcement")
Cc: <stable@vger.kernel.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
init_nfsd() should not unregister pernet subsys if the register fails
but should instead unwind from the last successful operation which is
register_filesystem().
Unregistering a failed register_pernet_subsys() call can result in
a kernel GPF as revealed by programmatically injecting an error in
register_pernet_subsys().
Verified the fix handled failure gracefully with no lingering nfsd
entry in /proc/filesystems. This change was introduced by the commit
bd5ae9288d ("nfsd: register pernet ops last, unregister first"),
the original error handling logic was correct.
Fixes: bd5ae9288d ("nfsd: register pernet ops last, unregister first")
Cc: stable@vger.kernel.org
Signed-off-by: Patrick Ho <Patrick.Ho@netapp.com>
Acked-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
- Fix crash in NLM TEST procedure
- NFSv4.1+ backchannel not restored after PATH_DOWN
-----BEGIN PGP SIGNATURE-----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=L0c1
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
"Critical bug fixes:
- Fix crash in NLM TEST procedure
- NFSv4.1+ backchannel not restored after PATH_DOWN"
* tag 'nfsd-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: back channel stuck in SEQ4_STATUS_CB_PATH_DOWN
NLM: Fix svcxdr_encode_owner()
When the back channel enters SEQ4_STATUS_CB_PATH_DOWN state, the client
recovers by sending BIND_CONN_TO_SESSION but the server fails to recover
the back channel and leaves it as NFSD4_CB_DOWN.
Fix by enhancing nfsd4_bind_conn_to_session to probe the back channel
by calling nfsd4_probe_callback.
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
This series consists of the usual driver updates (ufs, qla2xxx,
target, smartpqi, lpfc, mpt3sas). The core change causing the most
churn was replacing the command request field request with a macro,
allowing us to offset map to it and remove the redundant field; the
same was also done for the tag field. The most impactful change is
the final removal of scsi_ioctl, which has been deprecated for over a
decade.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYTD/TiYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishdUkAQCjb3Ux
4K9438mMelHlzM4er1S1IJ0WNnvObaVMNO9LBwD+JUz+rHsrKvuEX9j3g3C3u6JH
hC3BUEW8f2LLnujWanQ=
=lC5o
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This series consists of the usual driver updates (ufs, qla2xxx,
target, smartpqi, lpfc, mpt3sas).
The core change causing the most churn was replacing the command
request field request with a macro, allowing us to offset map to it
and remove the redundant field; the same was also done for the tag
field.
The most impactful change is the final removal of scsi_ioctl, which
has been deprecated for over a decade"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (293 commits)
scsi: ufs: Fix ufshcd_request_sense_async() for Samsung KLUFG8RHDA-B2D1
scsi: ufs: ufs-exynos: Fix static checker warning
scsi: mpt3sas: Use the proper SCSI midlayer interfaces for PI
scsi: lpfc: Use the proper SCSI midlayer interfaces for PI
scsi: lpfc: Copyright updates for 14.0.0.1 patches
scsi: lpfc: Update lpfc version to 14.0.0.1
scsi: lpfc: Add bsg support for retrieving adapter cmf data
scsi: lpfc: Add cmf_info sysfs entry
scsi: lpfc: Add debugfs support for cm framework buffers
scsi: lpfc: Add support for maintaining the cm statistics buffer
scsi: lpfc: Add rx monitoring statistics
scsi: lpfc: Add support for the CM framework
scsi: lpfc: Add cmfsync WQE support
scsi: lpfc: Add support for cm enablement buffer
scsi: lpfc: Add cm statistics buffer support
scsi: lpfc: Add EDC ELS support
scsi: lpfc: Expand FPIN and RDF receive logging
scsi: lpfc: Add MIB feature enablement support
scsi: lpfc: Add SET_HOST_DATA mbox cmd to pass date/time info to firmware
scsi: fc: Add EDC ELS definition
...
- Support for server-side disconnect injection via debugfs
- Protocol definitions for new RPC_AUTH_TLS authentication flavor
Performance improvements:
- Reduce page allocator traffic in the NFSD splice read actor
- Reduce CPU utilization in svcrdma's Send completion handler
Notable bug fixes:
- Stabilize lockd operation when re-exporting NFS mounts
- Fix the use of %.*s in NFSD tracepoints
- Fix /proc/sys/fs/nfs/nsm_use_hostnames
-----BEGIN PGP SIGNATURE-----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=TGkK
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd updates from Chuck Lever:
"New features:
- Support for server-side disconnect injection via debugfs
- Protocol definitions for new RPC_AUTH_TLS authentication flavor
Performance improvements:
- Reduce page allocator traffic in the NFSD splice read actor
- Reduce CPU utilization in svcrdma's Send completion handler
Notable bug fixes:
- Stabilize lockd operation when re-exporting NFS mounts
- Fix the use of %.*s in NFSD tracepoints
- Fix /proc/sys/fs/nfs/nsm_use_hostnames"
* tag 'nfsd-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (31 commits)
nfsd: fix crash on LOCKT on reexported NFSv3
nfs: don't allow reexport reclaims
lockd: don't attempt blocking locks on nfs reexports
nfs: don't atempt blocking locks on nfs reexports
Keep read and write fds with each nlm_file
lockd: update nlm_lookup_file reexport comment
nlm: minor refactoring
nlm: minor nlm_lookup_file argument change
lockd: lockd server-side shouldn't set fl_ops
SUNRPC: Add documentation for the fail_sunrpc/ directory
SUNRPC: Server-side disconnect injection
SUNRPC: Move client-side disconnect injection
SUNRPC: Add a /sys/kernel/debug/fail_sunrpc/ directory
svcrdma: xpt_bc_xprt is already clear in __svc_rdma_free()
nfsd4: Fix forced-expiry locking
rpc: fix gss_svc_init cleanup on failure
SUNRPC: Add RPC_AUTH_TLS protocol numbers
lockd: change the proc_handler for nsm_use_hostnames
sysctl: introduce new proc handler proc_dobool
SUNRPC: Fix a NULL pointer deref in trace_svc_stats_latency()
...
Unlike other filesystems, NFSv3 tries to use fl_file in the GETLK case.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
In the reexport case, nfsd is currently passing along locks with the
reclaim bit set. The client sends a new lock request, which is granted
if there's currently no conflict--even if it's possible a conflicting
lock could have been briefly held in the interim.
We don't currently have any way to safely grant reclaim, so for now
let's just deny them all.
I'm doing this by passing the reclaim bit to nfs and letting it fail the
call, with the idea that eventually the client might be able to do
something more forgiving here.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Acked-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
NFS implements blocking locks by blocking inside its lock method. In
the reexport case, this blocks the nfs server thread, which could lead
to deadlocks since an nfs server thread might be required to unlock the
conflicting lock. It also causes a crash, since the nfs server thread
assumes it can free the lock when its lm_notify lock callback is called.
Ideal would be to make the nfs lock method return without blocking in
this case, but for now it works just not to attempt blocking locks. The
difference is just that the original client will have to poll (as it
does in the v4.0 case) instead of getting a callback when the lock's
available.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Acked-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
We shouldn't really be using a read-only file descriptor to take a write
lock.
Most filesystems will put up with it. But NFS, for example, won't.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
We added CONFIG_MANDATORY_FILE_LOCKING in 2015, and soon after turned it
off in Fedora and RHEL8. Several other distros have followed suit.
I've heard of one problem in all that time: Someone migrated from an
older distro that supported "-o mand" to one that didn't, and the host
had a fstab entry with "mand" in it which broke on reboot. They didn't
actually _use_ mandatory locking so they just removed the mount option
and moved on.
This patch rips out mandatory locking support wholesale from the kernel,
along with the Kconfig option and the Documentation file. It also
changes the mount code to ignore the "mand" mount option instead of
erroring out, and to throw a big, ugly warning.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
This should use the network-namespace-wide client_lock, not the
per-client cl_lock.
You shouldn't see any bugs unless you're actually using the
forced-expiry interface introduced by 89c905becc.
Fixes: 89c905becc "nfsd: allow forced expiration of NFSv4 clients"
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Including one's name in copyright claims is appropriate. Including it
in random comments is just vanity. After 2 decades, it is time for
these to be gone.
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Large splice reads call put_page() repeatedly. put_page() is
relatively expensive to call, so replace it with the new
svc_rqst_replace_page() helper to help amortize that cost.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: NeilBrown <neilb@suse.de>
A few useful observations:
- The value in @size is never modified.
- splice_desc.len is an unsigned int, and so is xdr_buf.page_len.
An implicit cast to size_t is unnecessary.
- The computation of .page_len is the same in all three arms
of the "if" statement, so hoist it out to make it clear that
the operation is an unconditional invariant.
The resulting function is 18 bytes shorter on my system (-Os).
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: NeilBrown <neilb@suse.de>
CONFIG_BLK_SCSI_REQUEST is rather misnamed as it enables building a small
amount of code shared by the SCSI initiator, target, and consumers of the
scsi_request passthrough API. Rename it and also allow building it as a
module.
[mkp: add module license]
Link: https://lore.kernel.org/r/20210724072033.1284840-20-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-----BEGIN PGP SIGNATURE-----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=gHse
-----END PGP SIGNATURE-----
Merge tag 'block-5.14-2021-07-08' of git://git.kernel.dk/linux-block
Pull more block updates from Jens Axboe:
"A combination of changes that ended up depending on both the driver
and core branch (and/or the IDE removal), and a few late arriving
fixes. In detail:
- Fix io ticks wrap-around issue (Chunguang)
- nvme-tcp sock locking fix (Maurizio)
- s390-dasd fixes (Kees, Christoph)
- blk_execute_rq polling support (Keith)
- blk-cgroup RCU iteration fix (Yu)
- nbd backend ID addition (Prasanna)
- Partition deletion fix (Yufen)
- Use blk_mq_alloc_disk for mmc, mtip32xx, ubd (Christoph)
- Removal of now dead block request types due to IDE removal
(Christoph)
- Loop probing and control device cleanups (Christoph)
- Device uevent fix (Christoph)
- Misc cleanups/fixes (Tetsuo, Christoph)"
* tag 'block-5.14-2021-07-08' of git://git.kernel.dk/linux-block: (34 commits)
blk-cgroup: prevent rcu_sched detected stalls warnings while iterating blkgs
block: fix the problem of io_ticks becoming smaller
nvme-tcp: can't set sk_user_data without write_lock
loop: remove unused variable in loop_set_status()
block: remove the bdgrab in blk_drop_partitions
block: grab a device refcount in disk_uevent
s390/dasd: Avoid field over-reading memcpy()
dasd: unexport dasd_set_target_state
block: check disk exist before trying to add partition
ubd: remove dead code in ubd_setup_common
nvme: use return value from blk_execute_rq()
block: return errors from blk_execute_rq()
nvme: use blk_execute_rq() for passthrough commands
block: support polling through blk_execute_rq
block: remove REQ_OP_SCSI_{IN,OUT}
block: mark blk_mq_init_queue_data static
loop: rewrite loop_exit using idr_for_each_entry
loop: split loop_lookup
loop: don't allow deleting an unspecified loop device
loop: move loop_ctl_mutex locking into loop_add
...
- add tracepoints for callbacks and for client creation and
destruction
- cache the mounts used for server-to-server copies
- expose callback information in /proc/fs/nfsd/clients/*/info
- don't hold locks unnecessarily while waiting for commits
- update NLM to use xdr_stream, as we have for NFSv2/v3/v4
-----BEGIN PGP SIGNATURE-----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=BQyR
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.14' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
- add tracepoints for callbacks and for client creation and destruction
- cache the mounts used for server-to-server copies
- expose callback information in /proc/fs/nfsd/clients/*/info
- don't hold locks unnecessarily while waiting for commits
- update NLM to use xdr_stream, as we have for NFSv2/v3/v4
* tag 'nfsd-5.14' of git://linux-nfs.org/~bfields/linux: (69 commits)
nfsd: fix NULL dereference in nfs3svc_encode_getaclres
NFSD: Prevent a possible oops in the nfs_dirent() tracepoint
nfsd: remove redundant assignment to pointer 'this'
nfsd: Reduce contention for the nfsd_file nf_rwsem
lockd: Update the NLMv4 SHARE results encoder to use struct xdr_stream
lockd: Update the NLMv4 nlm_res results encoder to use struct xdr_stream
lockd: Update the NLMv4 TEST results encoder to use struct xdr_stream
lockd: Update the NLMv4 void results encoder to use struct xdr_stream
lockd: Update the NLMv4 FREE_ALL arguments decoder to use struct xdr_stream
lockd: Update the NLMv4 SHARE arguments decoder to use struct xdr_stream
lockd: Update the NLMv4 SM_NOTIFY arguments decoder to use struct xdr_stream
lockd: Update the NLMv4 nlm_res arguments decoder to use struct xdr_stream
lockd: Update the NLMv4 UNLOCK arguments decoder to use struct xdr_stream
lockd: Update the NLMv4 CANCEL arguments decoder to use struct xdr_stream
lockd: Update the NLMv4 LOCK arguments decoder to use struct xdr_stream
lockd: Update the NLMv4 TEST arguments decoder to use struct xdr_stream
lockd: Update the NLMv4 void arguments decoder to use struct xdr_stream
lockd: Update the NLMv1 SHARE results encoder to use struct xdr_stream
lockd: Update the NLMv1 nlm_res results encoder to use struct xdr_stream
lockd: Update the NLMv1 TEST results encoder to use struct xdr_stream
...
