Remove the family check for accessing the MSR_AMD_HWCR MSR and replace
it with a cpupower cap flag.
This update also allows for the removal of the local cpupower_cpu_info
variable in cpufreq_has_boost_support() since we no longer need it to
check the family.
Signed-off-by: Nathan Fontenot <nathan.fontenot@amd.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The decode_pstates() routine no longer uses the CPU family and
the caleed routines (get_cof() and get_did()) can grab the family
from the global cpupower_cpu_info struct. These update removes
passing the family arg to all these routines.
Signed-off-by: Nathan Fontenot <nathan.fontenot@amd.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The enabled bit (bit 63) is common for all families so we can remove
the multiple enabled checks based on family and have a common check
for HW pstate enabled.
Signed-off-by: Nathan Fontenot <nathan.fontenot@amd.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The family checks in get_cof() and get_did() need to use the
correct MSR format depending on the family. Add a cpupower
capability for using the pstatedef (family 17h and newer) to
control this instead of direct family checks.
Signed-off-by: Nathan Fontenot <nathan.fontenot@amd.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The pscur variable is set but not uused, just remove it.
This may have previsously been set to validate the MSR_AMD_PSTATE_STATUS
MSR. With the addition of the CPUPOWER_CAP_AMD_HW_PSTATE cap flag this
is no longer needed since the cpuid bit to enable this cap flag also
validates that the MSR_AMD_PSTATE_STATUS MSR is present.
Signed-off-by: Nathan Fontenot <nathan.fontenot@amd.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add a check in get_cpu_info() for the ability to read frequencies
from hardware and set the CPUPOWER_CAP_AMD_HW_PSTATE cpuid flag.
The cpuid flag is set when CPUID_80000007_EDX[7] is set,
which is all families >= 10h. The check excludes family 14h
because HW pstate reporting was not implemented on family 14h.
This is intended to reduce family checks in the main code paths.
Signed-off-by: Nathan Fontenot <nathan.fontenot@amd.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Reviewed-by: skhan@linuxfoundation.org
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The name is Core Performance Boost (CPB) for the cpuid flag. Correct
cpuid caps flag to use this name (instead of CBP).
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Nathan Fontenot <nathan.fontenot@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The msr_pstate union struct named fam17h_bits is misleading since
this is the struct to use for all families >= 0x17, not just
for family 0x17. Rename the bits structs to be 'pstate' (for pre
family 17h CPUs) and 'pstatedef' (for CPUs since fam 17h) to align
closer with PPR/BDKG (1) naming.
There are no functional changes as part of this update.
1: AMD Processor Programming Reference (PPR) and BIOS and
Kernel Developer's Guide (BKDG) available at:
http://developer.amd.com/resources/developer-guides-manuals
Signed-off-by: Nathan Fontenot <nathan.fontenot@amd.com>
Reviewed-by: Robert Richter <rrichter@amd.com>
Reviewed-by: skhan@linuxfoundation.org
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
- Use local_clock() instead of jiffies in the cpufreq statistics to
improve accuracy (Viresh Kumar).
- Fix up OPP usage in the cpufreq-dt and qcom-cpufreq-nvmem cpufreq
drivers (Viresh Kumar).
- Clean up the cpufreq core, the intel_pstate driver and the
schedutil cpufreq governor (Rafael Wysocki).
- Fix up error code paths in the sti-cpufreq and mediatek cpufreq
drivers (Yangtao Li, Qinglang Miao).
- Fix cpufreq_online() to return error codes instead of success (0)
in all cases when it fails (Wang ShaoBo).
- Add mt8167 support to the mediatek cpufreq driver and blacklist
mt8516 in the cpufreq-dt-platdev driver (Fabien Parent).
- Modify the tegra194 cpufreq driver to always return values from
the frequency table as the current frequency and clean up that
driver (Sumit Gupta, Jon Hunter).
- Modify the arm_scmi cpufreq driver to allow it to discover the
power scale present in the performance protocol and provide this
information to the Energy Model (Lukasz Luba).
- Add missing MODULE_DEVICE_TABLE to several cpufreq drivers (Pali
Rohár).
- Clean up the CPPC cpufreq driver (Ionela Voinescu).
- Fix NVMEM_IMX_OCOTP dependency in the imx cpufreq driver (Arnd
Bergmann).
- Rework the poling interval selection for the polling state in
cpuidle (Mel Gorman).
- Enable suspend-to-idle for PSCI OSI mode in the PSCI cpuidle
driver (Ulf Hansson).
- Modify the OPP framework to support empty (node-less) OPP tables
in DT for passing dependency information (Nicola Mazzucato).
- Fix potential lockdep issue in the OPP core and clean up the OPP
core (Viresh Kumar).
- Modify dev_pm_opp_put_regulators() to accept a NULL argument and
update its users accordingly (Viresh Kumar).
- Add frequency changes tracepoint to devfreq (Matthias Kaehlcke).
- Add support for governor feature flags to devfreq, make devfreq
sysfs file permissions depend on the governor and clean up the
devfreq core (Chanwoo Choi).
- Clean up the tegra20 devfreq driver and deprecate it to allow
another driver based on EMC_STAT to be used instead of it (Dmitry
Osipenko).
- Add interconnect support to the tegra30 devfreq driver, allow it
to take the interconnect and OPP information from DT and clean it
up ((Dmitry Osipenko).
- Add interconnect support to the exynos-bus devfreq driver along
with interconnect properties documentation (Sylwester Nawrocki).
- Add suport for AMD Fam17h and Fam19h processors to the RAPL power
capping driver (Victor Ding, Kim Phillips).
- Fix handling of overly long constraint names in the powercap
framework (Lukasz Luba).
- Fix the wakeup configuration handling for bridges in the ACPI
device power management core (Rafael Wysocki).
- Add support for using an abstract scale for power units in the
Energy Model (EM) and document it (Lukasz Luba).
- Add em_cpu_energy() micro-optimization to the EM (Pavankumar
Kondeti).
- Modify the generic power domains (genpd) framwework to support
suspend-to-idle (Ulf Hansson).
- Fix creation of debugfs nodes in genpd (Thierry Strudel).
- Clean up genpd (Lina Iyer).
- Clean up the core system-wide suspend code and make it print
driver flags for devices with debug enabled (Alex Shi, Patrice
Chotard, Chen Yu).
- Modify the ACPI system reboot code to make it prepare for system
power off to avoid confusing the platform firmware (Kai-Heng Feng).
- Update the pm-graph (multiple changes, mostly usability-related)
and cpupower (online and offline CPU information support) PM
utilities (Todd Brandt, Brahadambal Srinivasan).
-----BEGIN PGP SIGNATURE-----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=BVdX
-----END PGP SIGNATURE-----
Merge tag 'pm-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These update cpufreq (core and drivers), cpuidle (polling state
implementation and the PSCI driver), the OPP (operating performance
points) framework, devfreq (core and drivers), the power capping RAPL
(Running Average Power Limit) driver, the Energy Model support, the
generic power domains (genpd) framework, the ACPI device power
management, the core system-wide suspend code and power management
utilities.
Specifics:
- Use local_clock() instead of jiffies in the cpufreq statistics to
improve accuracy (Viresh Kumar).
- Fix up OPP usage in the cpufreq-dt and qcom-cpufreq-nvmem cpufreq
drivers (Viresh Kumar).
- Clean up the cpufreq core, the intel_pstate driver and the
schedutil cpufreq governor (Rafael Wysocki).
- Fix up error code paths in the sti-cpufreq and mediatek cpufreq
drivers (Yangtao Li, Qinglang Miao).
- Fix cpufreq_online() to return error codes instead of success (0)
in all cases when it fails (Wang ShaoBo).
- Add mt8167 support to the mediatek cpufreq driver and blacklist
mt8516 in the cpufreq-dt-platdev driver (Fabien Parent).
- Modify the tegra194 cpufreq driver to always return values from the
frequency table as the current frequency and clean up that driver
(Sumit Gupta, Jon Hunter).
- Modify the arm_scmi cpufreq driver to allow it to discover the
power scale present in the performance protocol and provide this
information to the Energy Model (Lukasz Luba).
- Add missing MODULE_DEVICE_TABLE to several cpufreq drivers (Pali
Rohár).
- Clean up the CPPC cpufreq driver (Ionela Voinescu).
- Fix NVMEM_IMX_OCOTP dependency in the imx cpufreq driver (Arnd
Bergmann).
- Rework the poling interval selection for the polling state in
cpuidle (Mel Gorman).
- Enable suspend-to-idle for PSCI OSI mode in the PSCI cpuidle driver
(Ulf Hansson).
- Modify the OPP framework to support empty (node-less) OPP tables in
DT for passing dependency information (Nicola Mazzucato).
- Fix potential lockdep issue in the OPP core and clean up the OPP
core (Viresh Kumar).
- Modify dev_pm_opp_put_regulators() to accept a NULL argument and
update its users accordingly (Viresh Kumar).
- Add frequency changes tracepoint to devfreq (Matthias Kaehlcke).
- Add support for governor feature flags to devfreq, make devfreq
sysfs file permissions depend on the governor and clean up the
devfreq core (Chanwoo Choi).
- Clean up the tegra20 devfreq driver and deprecate it to allow
another driver based on EMC_STAT to be used instead of it (Dmitry
Osipenko).
- Add interconnect support to the tegra30 devfreq driver, allow it to
take the interconnect and OPP information from DT and clean it up
(Dmitry Osipenko).
- Add interconnect support to the exynos-bus devfreq driver along
with interconnect properties documentation (Sylwester Nawrocki).
- Add suport for AMD Fam17h and Fam19h processors to the RAPL power
capping driver (Victor Ding, Kim Phillips).
- Fix handling of overly long constraint names in the powercap
framework (Lukasz Luba).
- Fix the wakeup configuration handling for bridges in the ACPI
device power management core (Rafael Wysocki).
- Add support for using an abstract scale for power units in the
Energy Model (EM) and document it (Lukasz Luba).
- Add em_cpu_energy() micro-optimization to the EM (Pavankumar
Kondeti).
- Modify the generic power domains (genpd) framwework to support
suspend-to-idle (Ulf Hansson).
- Fix creation of debugfs nodes in genpd (Thierry Strudel).
- Clean up genpd (Lina Iyer).
- Clean up the core system-wide suspend code and make it print driver
flags for devices with debug enabled (Alex Shi, Patrice Chotard,
Chen Yu).
- Modify the ACPI system reboot code to make it prepare for system
power off to avoid confusing the platform firmware (Kai-Heng Feng).
- Update the pm-graph (multiple changes, mostly usability-related)
and cpupower (online and offline CPU information support) PM
utilities (Todd Brandt, Brahadambal Srinivasan)"
* tag 'pm-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (86 commits)
cpufreq: Fix cpufreq_online() return value on errors
cpufreq: Fix up several kerneldoc comments
cpufreq: stats: Use local_clock() instead of jiffies
cpufreq: schedutil: Simplify sugov_update_next_freq()
cpufreq: intel_pstate: Simplify intel_cpufreq_update_pstate()
PM: domains: create debugfs nodes when adding power domains
opp: of: Allow empty opp-table with opp-shared
dt-bindings: opp: Allow empty OPP tables
media: venus: dev_pm_opp_put_*() accepts NULL argument
drm/panfrost: dev_pm_opp_put_*() accepts NULL argument
drm/lima: dev_pm_opp_put_*() accepts NULL argument
PM / devfreq: exynos: dev_pm_opp_put_*() accepts NULL argument
cpufreq: qcom-cpufreq-nvmem: dev_pm_opp_put_*() accepts NULL argument
cpufreq: dt: dev_pm_opp_put_regulators() accepts NULL argument
opp: Allow dev_pm_opp_put_*() APIs to accept NULL opp_table
opp: Don't create an OPP table from dev_pm_opp_get_opp_table()
cpufreq: dt: Don't (ab)use dev_pm_opp_get_opp_table() to create OPP table
opp: Reduce the size of critical section in _opp_kref_release()
PM / EM: Micro optimization in em_cpu_energy
cpufreq: arm_scmi: Discover the power scale in performance protocol
...
... instead of poking at the MSR. For that, move the accessor functions
to misc.c and add a sysfs-writing function too.
There should be no functional changes resulting from this.
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: Thomas Renninger <trenn@suse.com>
Link: https://lkml.kernel.org/r/20201029190259.3476-2-bp@alien8.de
When a user tries to modify cpuidle or cpufreq properties on offline
CPUs, the tool returns success (exit status 0) but also does not provide
any warning message regarding offline cpus that may have been specified
but left unchanged. In case of all or a few CPUs being offline, it can be
difficult to keep track of which CPUs didn't get the new frequency or idle
state set. Silent failures are difficult to keep track of when there are a
huge number of CPUs on which the action is performed.
This patch adds helper functions to find both online and offline CPUs and
print them out accordingly.
We use these helper functions in cpuidle-set and cpufreq-set to print an
additional message if the user attempts to modify offline cpus.
Reported-by: Pavithra R. Prakash <pavrampu@in.ibm.com>
Signed-off-by: Brahadambal Srinivasan <latha@linux.vnet.ibm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Building cpupower with -fno-common in CFLAGS results in errors due to
multiple definitions of the 'cpu_count' and 'start_time' variables.
./utils/idle_monitor/snb_idle.o:./utils/idle_monitor/cpupower-monitor.h:28:
multiple definition of `cpu_count';
./utils/idle_monitor/nhm_idle.o:./utils/idle_monitor/cpupower-monitor.h:28:
first defined here
...
./utils/idle_monitor/cpuidle_sysfs.o:./utils/idle_monitor/cpuidle_sysfs.c:22:
multiple definition of `start_time';
./utils/idle_monitor/amd_fam14h_idle.o:./utils/idle_monitor/amd_fam14h_idle.c:85:
first defined here
The -fno-common option will be enabled by default in GCC 10.
Bug: https://bugs.gentoo.org/707462
Signed-off-by: Mike Gilbert <floppym@gentoo.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Commit ae2917093f ("tools/power/cpupower: Display boost frequency
separately") modified the library function:
struct cpufreq_available_frequencies
*cpufreq_get_available_frequencies(unsigned int cpu)
to
struct cpufreq_frequencies
*cpufreq_get_frequencies(const char *type, unsigned int cpu)
This patch recovers the old API and implements the new functionality
in a newly introduce method:
struct cpufreq_boost_frequencies
*cpufreq_get_available_frequencies(unsigned int cpu)
This one should get merged into stable kernels back to 5.0 when
the above had been introduced.
Fixes: ae2917093f ("tools/power/cpupower: Display boost frequency separately")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
AMD Zen 2 introduces the RDPRU instruction which can be used to access some
processor registers which are typically only accessible in privilege level
0. ECX specifies the register to read and EDX:EAX will contain the value read.
ECX: 0 - Register MPERF
1 - Register APERF
This has the added advantage of not having to use the msr module, since the
userspace to kernel transitions which occur during each read_msr() might
cause APERF and MPERF to go out of sync.
Signed-off-by: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Acked-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The per_cpu_schedule flag is used to move the cpupower process to the cpu
on which we are looking to read the APERF/MPERF registers.
This prevents IPIs from being generated by read_msr()s as we are already
on the cpu of interest.
Ex: If cpupower is running on CPU 0 and we execute
read_msr(20, MSR_APERF, val) then,
read_msr(20, MSR_MPERF, val)
the msr module will generate an IPI from CPU 0 to CPU 20 to query
for the MSR_APERF and then the MSR_MPERF in separate IPIs.
This delay, caused by IPI latency, between reading the APERF and MPERF
registers may cause both of them to go out of sync.
The use of the per_cpu_schedule flag reduces the probability of this
from happening. It comes at the cost of a negligible increase in cpu
consumption caused by the migration of cpupower across each of the
cpus of the system.
Signed-off-by: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Acked-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Move the needs_root variable into a sub-struct. This is in preparation
for adding a new flag for cpuidle_monitor.
Update all uses of the needs_root variable to reflect this change.
Signed-off-by: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Acked-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Cpupower tool has set and info options which are being used only by
x86 machines. This patch removes support for these two subcommands
from cpupower utility for POWER. Thus, these two subcommands will now be
available only for intel.
This removes the ambiguous error message while using set option in case
of using non-intel systems.
Without this patch on a POWER system:
root@ubuntu:~# cpupower info
System does not support Intel's performance bias setting
root@ubuntu:~# cpupower set -b 10
Error setting perf-bias value on CPU
With this patch on a POWER box:
root@ubuntu:~# cpupower info
Subcommand not supported on POWER
Same result for set subcommand.
This patch does not affect results on a intel box.
Signed-off-by: Abhishek Goel <huntbag@linux.vnet.ibm.com>
Acked-by: Thomas Renninger <trenn@suse.de>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When building cpupower with clang, the following warning appears:
utils/idle_monitor/hsw_ext_idle.c:42:16: warning: initializer overrides
prior initialization of this subobject [-Winitializer-overrides]
.desc = N_("Processor Package C2"),
^~~~~~~~~~~~~~~~~~~~~~
./utils/helpers/helpers.h:25:33: note: expanded from macro 'N_'
#define N_(String) gettext_noop(String)
^~~~~~
./utils/helpers/helpers.h:23:30: note: expanded from macro
'gettext_noop'
#define gettext_noop(String) String
^~~~~~
utils/idle_monitor/hsw_ext_idle.c:41:16: note: previous initialization
is here
.desc = N_("Processor Package C9"),
^~~~~~~~~~~~~~~~~~~~~~
./utils/helpers/helpers.h:25:33: note: expanded from macro 'N_'
#define N_(String) gettext_noop(String)
^~~~~~
./utils/helpers/helpers.h:23:30: note: expanded from macro
'gettext_noop'
#define gettext_noop(String) String
^~~~~~
1 warning generated.
This appears to be a copy and paste or merge mistake because the name
and id fields both have PC9 in them, not PC2. Remove the second
assignment to fix the warning.
Fixes: 7ee767b69b ("cpupower: Add Haswell family 0x45 specific idle monitor to show PC8,9,10 states")
Link: https://github.com/ClangBuiltLinux/linux/issues/718
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
To set frequency on specific cpus using cpupower, following syntax can
be used :
cpupower -c #i frequency-set -f #f -r
While setting frequency using cpupower frequency-set command, if we use
'-r' option, it is expected to set frequency for all cpus related to
cpu #i. But it is observed to be missing the last cpu in related cpu
list. This patch fixes the problem.
Signed-off-by: Abhishek Goel <huntbag@linux.vnet.ibm.com>
Reviewed-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Based on 1 normalized pattern(s):
licensed under the terms of the gnu gpl license version 2
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 62 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.929121379@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cpufreq driver creates sysfs file "scaling_boost_frequency" for platforms
which support boost frequency. Cpupower now prints boost frequencies
separately. For few x86 vendors who already have different way to get boost
frequency, will continue to use the existing logic. Rest of the platforms
will rely on "scaling_boost_frequency" file to display boost frequency.
Signed-off-by: Abhishek Goel <huntbag@linux.vnet.ibm.com>
Signed-off-by: Shuah Khan <shuah@kernel.org>
Pull x86 cpu updates from Ingo Molnar:
"The main changes in this cycle were:
- Add support for the "Dhyana" x86 CPUs by Hygon: these are licensed
based on the AMD Zen architecture, and are built and sold in China,
for domestic datacenter use. The code is pretty close to AMD
support, mostly with a few quirks and enumeration differences. (Pu
Wen)
- Enable CPUID support on Cyrix 6x86/6x86L processors"
* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools/cpupower: Add Hygon Dhyana support
cpufreq: Add Hygon Dhyana support
ACPI: Add Hygon Dhyana support
x86/xen: Add Hygon Dhyana support to Xen
x86/kvm: Add Hygon Dhyana support to KVM
x86/mce: Add Hygon Dhyana support to the MCA infrastructure
x86/bugs: Add Hygon Dhyana to the respective mitigation machinery
x86/apic: Add Hygon Dhyana support
x86/pci, x86/amd_nb: Add Hygon Dhyana support to PCI and northbridge
x86/amd_nb: Check vendor in AMD-only functions
x86/alternative: Init ideal_nops for Hygon Dhyana
x86/events: Add Hygon Dhyana support to PMU infrastructure
x86/smpboot: Do not use BSP INIT delay and MWAIT to idle on Dhyana
x86/cpu/mtrr: Support TOP_MEM2 and get MTRR number
x86/cpu: Get cache info and setup cache cpumap for Hygon Dhyana
x86/cpu: Create Hygon Dhyana architecture support file
x86/CPU: Change query logic so CPUID is enabled before testing
x86/CPU: Use correct macros for Cyrix calls
cpupower crashes on VMWare guests. The guests have the AMD PStateDef MSR
(0xC0010064 + state number) set to zero. As a result fid and did are zero
and the crash occurs because of a divide by zero (cof = fid/did). This
can be prevented by checking the enable bit in the PStateDef MSR before
calculating cof. By doing this the value of pstate[i] remains zero and
the value can be tested before displaying the active Pstates.
Check the enable bit in the PstateDef register for all supported families
and only print out enabled Pstates.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Stafford Horne <shorne@gmail.com>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
The msr_pstate data is only 63 bits long and should be 64 bits.
Add in the missing bit from res1 for AMD Family 0x17.
Reference: https://www.amd.com/system/files/TechDocs/54945_PPR_Family_17h_Models_00h-0Fh.pdf, page 138.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Stafford Horne <shorne@gmail.com>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
The tool cpupower is useful to get CPU frequency information and monitor
power stats on the Hygon Dhyana platform. So add Hygon Dhyana support to
it by checking vendor and family to share the code path of AMD family
17h.
Signed-off-by: Pu Wen <puwen@hygon.cn>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
CC: Prarit Bhargava <prarit@redhat.com>
CC: Shuah Khan <shuah@kernel.org>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Thomas Renninger <trenn@suse.com>
CC: linux-pm@vger.kernel.org
Link: http://lkml.kernel.org/r/5ce86123a7b9dad925ac583d88d2f921040e859b.1538583282.git.puwen@hygon.cn
This update consists of fixes to tool's handling of offline cpus.
The first patch fixes the tool to find information on the cpu it
is running on, instead of always looking for cpu0 and failing if
cpu0 happens to be offline.
The second patch fixes the incorrect check for offline cpu status.
-----BEGIN PGP SIGNATURE-----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=Xe5t
-----END PGP SIGNATURE-----
Merge tag 'linux-cpupower-4.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Pull cpupower utility fixes for 4.15-rc2 from Shuah Khan:
"This update consists of fixes to tool's handling of offline cpus.
The first patch fixes the tool to find information on the cpu it
is running on, instead of always looking for cpu0 and failing if
cpu0 happens to be offline.
The second patch fixes the incorrect check for offline cpu status."
* tag 'linux-cpupower-4.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
cpupower : Fix cpupower working when cpu0 is offline
cpupowerutils: bench - Fix cpu online check
cpuidle_monitor used to assume that cpu0 is always online which is not
a valid assumption on POWER machines. This patch fixes this by getting
the cpu on which the current thread is running, instead of always using
cpu0 for monitoring which may not be online.
Signed-off-by: Abhishek Goel <huntbag@linux.vnet.ibm.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
* pm-devfreq:
PM / devfreq: Define the constant governor name
PM / devfreq: Remove unneeded conditional statement
PM / devfreq: Show the all available frequencies
PM / devfreq: Change return type of devfreq_set_freq_table()
PM / devfreq: Use the available min/max frequency
Revert "PM / devfreq: Add show_one macro to delete the duplicate code"
PM / devfreq: Set min/max_freq when adding the devfreq device
* pm-tools:
tools/power/cpupower: add libcpupower.so.0.0.1 to .gitignore
tools/power/cpupower: Add 64 bit library detection
MAINTAINERS: add maintainer for tools/power/cpupower
cpupower: Fix no-rounding MHz frequency output
'cpupower frequency-info -ln' returns kHz values on systems with MHz range
minimum CPU frequency range. For example, on a 800MHz to 4.20GHz system
the command returns
hardware limits: 800000 MHz - 4.200000 GHz
The code that causes this error can be removed. The next else if clause
will handle the output correctly such that
hardware limits: 800.000 MHz - 4.200000 GHz
is displayed correctly.
[v2]: Remove two lines instead of fixing broken code.
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Renninger <trenn@suse.com>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Reviewed-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for new AMD family 0x17
- Add bit field changes to the msr_pstate structure
- Add the new formula for the calculation of cof
- Changed method to access to CpbDis
Signed-off-by: Sherry Hurwitz <sherry.hurwitz@amd.com>
Acked-by: Thomas Renninger <trenn@suse.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Save return value from amd_pci_get_num_boost_states
and remove redundant setting of *support
Signed-off-by: Sherry Hurwitz <sherry.hurwitz@amd.com>
Reviewed-by: Thomas Renninger <trenn@suse.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The switch that conditionally sets CPUPOWER_CAP_HAS_TURBO_RATIO and
CPUPOWER_CAP_IS_SNB flags is missing a break, so all cores get both
flags set and an assumed base clock of 100 MHz for turbo values.
Reported-by: GSR <gsr.bugs@infernal-iceberg.com>
Tested-by: GSR <gsr.bugs@infernal-iceberg.com>
References: https://bugs.debian.org/859978
Fixes: 8fb2e440b2 (cpupower: Show Intel turbo ratio support via ...)
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The intel_pstate kselftest expects that the output of
`cpupower frequency-info -l | tail -1 | awk ' { print $1 } '`
to get frequency limits. This does not work after the following two
changes.
- 562e5f1a3: rework the "cpupower frequency-info" command
(Jacob Tanenbaum) removed parsable limit output
- ce512b840: Do not analyse offlined cpus
(Thomas Renninger) added newline to break limit parsing more
This change preserves human readable output if wanted as well as
parsable output for scripts/tests.
Cc: Thomas Renninger <trenn@suse.com>
Cc: "Shreyas B. Prabhu" <shreyas@linux.vnet.ibm.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: linux-pm@vger.kernel.org
Signed-off-by: Stafford Horne <shorne@gmail.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
When converting to a shared library in ac5a181d06 ("cpupower: Add
cpuidle parts into library"), cpu_freq_cpu_exists() was converted to
cpupower_is_cpu_online(). cpu_req_cpu_exists() returned 0 on success and
-ENOSYS on failure whereas cpupower_is_cpu_online returns 1 on success.
Check for the correct return value in cpufreq-set.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1374212
Fixes: ac5a181d06 (cpupower: Add cpuidle parts into library)
Reported-by: Julian Seward <jseward@acm.org>
Signed-off-by: Laura Abbott <labbott@redhat.com>
Acked-by: Thomas Renninger <trenn@suse.com>
Cc: 4.7+ <stable@vger.kernel.org> # 4.7+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This more or less is a renaming and moving of functions and should not
introduce any functional change.
cpupower was built from cpufrequtils (which had a C library providing easy
access to cpu frequency platform info). In the meantime it got enhanced
by quite some neat cpuidle userspace tools.
Now the cpu idle functions have been separated and added to the cpupower.so
library.
So beside an already existing public header file:
cpufreq.h
cpupower now also exports these cpu idle functions in:
cpuidle.h
Here again pasted for better review of the interfaces:
======================================
int cpuidle_is_state_disabled(unsigned int cpu,
unsigned int idlestate);
int cpuidle_state_disable(unsigned int cpu, unsigned int idlestate,
unsigned int disable);
unsigned long cpuidle_state_latency(unsigned int cpu,
unsigned int idlestate);
unsigned long cpuidle_state_usage(unsigned int cpu,
unsigned int idlestate);
unsigned long long cpuidle_state_time(unsigned int cpu,
unsigned int idlestate);
char *cpuidle_state_name(unsigned int cpu,
unsigned int idlestate);
char *cpuidle_state_desc(unsigned int cpu,
unsigned int idlestate);
unsigned int cpuidle_state_count(unsigned int cpu);
char *cpuidle_get_governor(void);
char *cpuidle_get_driver(void);
======================================
Signed-off-by: Thomas Renninger <trenn@suse.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix the following build error by including limits.h -
utils/cpufreq-info.c: In function ‘get_latency’:
utils/cpufreq-info.c:437:29: error: ‘UINT_MAX’ undeclared (first use in
this function)
if (!latency || latency == UINT_MAX) {
^
Signed-off-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com>
Fixes: e98f033f94 (cpupower: fix how "cpupower frequency-info" interprets latency)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
the intel-pstate driver does not support the ondemand governor and does not
have a valid value in
/sys/devices/system/cpu/cpu[x]/cpufreq/cpuinfo_transition_latency. The
intel-pstate driver sets cpuinfo_transition_latency to CPUFREQ_ETERNAL (-1),
the value written into cpuinfo_transition_latency is defind as an unsigned
int so checking the read value against max unsigned int will determine if the
value is valid.
Signed-off-by: Jacob Tanenbaum <jtanenba@redhat.com>
Signed-off-by: Thomas Renninger <trenn@suse.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
this patch makes two changes to the way that "cpupower
frequancy-info" operates
1. make it so that querying individual values always returns a
message to the user
currently cpupower frequency info doesn't return anything to the user when
querying an individual value cannot be returned
[root@amd-dinar-09 cpupower]# cpupower -c 4 frequency-info -d
analyzing CPU 4:
[root@amd-dinar-09 cpupower]#
I added messages so that each query prints a message to the terminal
[root@amd-dinar-09 cpupower]# ./cpupower -c 4 frequency-info -d
analyzing CPU 4:
no or unknown cpufreq driver is active on this CPU
[root@amd-dinar-09 cpupower]#
(this is just one example)
2. change debug_output_one() to use the functions already provided
by cpufreq-info.c to query individual values of interest.
Signed-off-by: Jacob Tanenbaum <jtanenba@redhat.com>
Signed-off-by: Thomas Renninger <trenn@suse.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Use sysfs_is_cpu_online(cpu) instead of cpufreq_cpu_exists(cpu) to detect offlined cpus.
Re-arrange printfs slightly to have a consistent output even if you have multiple CPUs
as output and even if offlined cores are in between.
Signed-off-by: Thomas Renninger <trenn@suse.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch tries to creates a common structure initialization
within the cpupower tool.
Previously the ``struct option`` was initialized
using `designated initializer` technique which was
not needed. There were conflicting initialization methods seen with
bench/main.c & others.
Signed-off-by: Sriram Raghunathan <sriram@marirs.net.in>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
cpupower idle-set -D <latency>
currently only disables all C-states that have a higher latency than the
specified <latency>. But if deep sleep states were already disabled and
have a lower latency, they should get enabled again.
For example:
This call:
cpupower idle-set -D 30
disables all C-states with a higher or equal latency than 30.
If one then calls:
cpupower idle-set -D 100
C-states with a latency between 30-99 will get enabled again with this patch
now. It is ensured that only C-states with a latency of 100 and higher are
disabled.
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[root@hp-dl980g7-02 linux]# cpupower monitor
...
5472| 0| 1|******|******|******|******|| 0.00| 0.00| 0.00| 0.00| 0.00 *is offline
10567| 0| 159|******|******|******|******|| 0.00| 0.00| 0.00| 0.00| 0.00 *is offline
1661206560|859272560| 150|******|******|******|******|| 0.00| 0.00| 0.00| 0.00| 0.00 *is offline
1661206560|943093104| 140|******|******|******|******|| 0.00| 0.00| 0.00| 0.00| 0.00 *is offline
because of this cpupower also holds the incorrect value for the number
of physical packages in the machine
Changed cpupower to initialize the values of an offline cpu's socket and
core to -1, warn the user that one or more cpus is/are
offline and not print statistics for offline cpus.
This fix hides offlined cores where topology cannot be accessed.
With a recent kernel patch suggested from Prarit Bhargava it may be possible
that soft offlined cores' topology can still be parsed.
This patch would then show which cores in which package/socket are offline,
when sane toplogoy information is available.
Signed-off-by: Jacob Tanenbaum <jtanenba@redhat.com>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
