- Core:
- Remove a global lock in the affinity setting code
The lock protects a cpumask for intermediate results and the lock
causes a bottleneck on simultaneous start of multiple virtual
machines. Replace the lock and the static cpumask with a per CPU
cpumask which is nicely serialized by raw spinlock held when
executing this code.
- Provide support for giving a suffix to interrupt domain names.
That's required to support devices with subfunctions so that the
domain names are distinct even if they originate from the same
device node.
- The usual set of cleanups and enhancements all over the place
- Drivers:
- Support for longarch AVEC interrupt chip
- Refurbishment of the Armada driver so it can be extended for new
variants.
- The usual set of cleanups and enhancements all over the place
-----BEGIN PGP SIGNATURE-----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=JlJ2
-----END PGP SIGNATURE-----
Merge tag 'irq-core-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"Core:
- Remove a global lock in the affinity setting code
The lock protects a cpumask for intermediate results and the lock
causes a bottleneck on simultaneous start of multiple virtual
machines. Replace the lock and the static cpumask with a per CPU
cpumask which is nicely serialized by raw spinlock held when
executing this code.
- Provide support for giving a suffix to interrupt domain names.
That's required to support devices with subfunctions so that the
domain names are distinct even if they originate from the same
device node.
- The usual set of cleanups and enhancements all over the place
Drivers:
- Support for longarch AVEC interrupt chip
- Refurbishment of the Armada driver so it can be extended for new
variants.
- The usual set of cleanups and enhancements all over the place"
* tag 'irq-core-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (73 commits)
genirq: Use cpumask_intersects()
genirq/cpuhotplug: Use cpumask_intersects()
irqchip/apple-aic: Only access system registers on SoCs which provide them
irqchip/apple-aic: Add a new "Global fast IPIs only" feature level
irqchip/apple-aic: Skip unnecessary enabling of use_fast_ipi
dt-bindings: apple,aic: Document A7-A11 compatibles
irqdomain: Use IS_ERR_OR_NULL() in irq_domain_trim_hierarchy()
genirq/msi: Use kmemdup_array() instead of kmemdup()
genirq/proc: Change the return value for set affinity permission error
genirq/proc: Use irq_move_pending() in show_irq_affinity()
genirq/proc: Correctly set file permissions for affinity control files
genirq: Get rid of global lock in irq_do_set_affinity()
genirq: Fix typo in struct comment
irqchip/loongarch-avec: Add AVEC irqchip support
irqchip/loongson-pch-msi: Prepare get_pch_msi_handle() for AVECINTC
irqchip/loongson-eiointc: Rename CPUHP_AP_IRQ_LOONGARCH_STARTING
LoongArch: Architectural preparation for AVEC irqchip
LoongArch: Move irqchip function prototypes to irq-loongson.h
irqchip/loongson-pch-msi: Switch to MSI parent domains
softirq: Remove unused 'action' parameter from action callback
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZuQEwAAKCRCRxhvAZXjc
osS0AQCgIpvey9oW5DMyMw6Bv0hFMRv95gbNQZfHy09iK+NMNAD9GALhb/4cMIVB
7YrZGXEz454lpgcs8AnrOVjVNfctOQg=
=e9s9
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.12.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs file updates from Christian Brauner:
"This is the work to cleanup and shrink struct file significantly.
Right now, (focusing on x86) struct file is 232 bytes. After this
series struct file will be 184 bytes aka 3 cacheline and a spare 8
bytes for future extensions at the end of the struct.
With struct file being as ubiquitous as it is this should make a
difference for file heavy workloads and allow further optimizations in
the future.
- struct fown_struct was embedded into struct file letting it take up
32 bytes in total when really it shouldn't even be embedded in
struct file in the first place. Instead, actual users of struct
fown_struct now allocate the struct on demand. This frees up 24
bytes.
- Move struct file_ra_state into the union containg the cleanup hooks
and move f_iocb_flags out of the union. This closes a 4 byte hole
we created earlier and brings struct file to 192 bytes. Which means
struct file is 3 cachelines and we managed to shrink it by 40
bytes.
- Reorder struct file so that nothing crosses a cacheline.
I suspect that in the future we will end up reordering some members
to mitigate false sharing issues or just because someone does
actually provide really good perf data.
- Shrinking struct file to 192 bytes is only part of the work.
Files use a slab that is SLAB_TYPESAFE_BY_RCU and when a kmem cache
is created with SLAB_TYPESAFE_BY_RCU the free pointer must be
located outside of the object because the cache doesn't know what
part of the memory can safely be overwritten as it may be needed to
prevent object recycling.
That has the consequence that SLAB_TYPESAFE_BY_RCU may end up
adding a new cacheline.
So this also contains work to add a new kmem_cache_create_rcu()
function that allows the caller to specify an offset where the
freelist pointer is supposed to be placed. Thus avoiding the
implicit addition of a fourth cacheline.
- And finally this removes the f_version member in struct file.
The f_version member isn't particularly well-defined. It is mainly
used as a cookie to detect concurrent seeks when iterating
directories. But it is also abused by some subsystems for
completely unrelated things.
It is mostly a directory and filesystem specific thing that doesn't
really need to live in struct file and with its wonky semantics it
really lacks a specific function.
For pipes, f_version is (ab)used to defer poll notifications until
a write has happened. And struct pipe_inode_info is used by
multiple struct files in their ->private_data so there's no chance
of pushing that down into file->private_data without introducing
another pointer indirection.
But pipes don't rely on f_pos_lock so this adds a union into struct
file encompassing f_pos_lock and a pipe specific f_pipe member that
pipes can use. This union of course can be extended to other file
types and is similar to what we do in struct inode already"
* tag 'vfs-6.12.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (26 commits)
fs: remove f_version
pipe: use f_pipe
fs: add f_pipe
ubifs: store cookie in private data
ufs: store cookie in private data
udf: store cookie in private data
proc: store cookie in private data
ocfs2: store cookie in private data
input: remove f_version abuse
ext4: store cookie in private data
ext2: store cookie in private data
affs: store cookie in private data
fs: add generic_llseek_cookie()
fs: use must_set_pos()
fs: add must_set_pos()
fs: add vfs_setpos_cookie()
s390: remove unused f_version
ceph: remove unused f_version
adi: remove unused f_version
mm: Removed @freeptr_offset to prevent doc warning
...
Now that both IPv4 and IPv6 support the new DSCP selector, enable user
space to configure FIB rules that make use of it by changing the policy
of the new DSCP attribute so that it accepts values in the range of [0,
63].
Use NLA_U8 rather than NLA_UINT as the field is of fixed size.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240911093748.3662015-5-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The FIB rule TOS selector is implemented differently between IPv4 and
IPv6. In IPv4 it is used to match on the three "Type of Services" bits
specified in RFC 791, while in IPv6 is it is used to match on the six
DSCP bits specified in RFC 2474.
Add a new FIB rule attribute to allow matching on DSCP. The attribute
will be used to implement a 'dscp' selector in ip-rule with a consistent
behavior between IPv4 and IPv6.
For now, set the type of the attribute to 'NLA_REJECT' so that user
space will not be able to configure it. This restriction will be lifted
once both IPv4 and IPv6 support the new attribute.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240911093748.3662015-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZuH9UQAKCRDbK58LschI
g0/zAP99WOcCBp1M/jSTUOba230+eiol7l5RirDEA6wu7TqY2QEAuvMG0KfCCpTI
I0WqStrK1QMbhwKPodJC1k+17jArKgw=
=jfMU
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-09-11
We've added 12 non-merge commits during the last 16 day(s) which contain
a total of 20 files changed, 228 insertions(+), 30 deletions(-).
There's a minor merge conflict in drivers/net/netkit.c:
00d066a4d4 ("netdev_features: convert NETIF_F_LLTX to dev->lltx")
d966087948 ("netkit: Disable netpoll support")
The main changes are:
1) Enable bpf_dynptr_from_skb for tp_btf such that this can be used
to easily parse skbs in BPF programs attached to tracepoints,
from Philo Lu.
2) Add a cond_resched() point in BPF's sock_hash_free() as there have
been several syzbot soft lockup reports recently, from Eric Dumazet.
3) Fix xsk_buff_can_alloc() to account for queue_empty_descs which
got noticed when zero copy ice driver started to use it,
from Maciej Fijalkowski.
4) Move the xdp:xdp_cpumap_kthread tracepoint before cpumap pushes skbs
up via netif_receive_skb_list() to better measure latencies,
from Daniel Xu.
5) Follow-up to disable netpoll support from netkit, from Daniel Borkmann.
6) Improve xsk selftests to not assume a fixed MAX_SKB_FRAGS of 17 but
instead gather the actual value via /proc/sys/net/core/max_skb_frags,
also from Maciej Fijalkowski.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
sock_map: Add a cond_resched() in sock_hash_free()
selftests/bpf: Expand skb dynptr selftests for tp_btf
bpf: Allow bpf_dynptr_from_skb() for tp_btf
tcp: Use skb__nullable in trace_tcp_send_reset
selftests/bpf: Add test for __nullable suffix in tp_btf
bpf: Support __nullable argument suffix for tp_btf
bpf, cpumap: Move xdp:xdp_cpumap_kthread tracepoint before rcv
selftests/xsk: Read current MAX_SKB_FRAGS from sysctl knob
xsk: Bump xsk_queue::queue_empty_descs in xp_can_alloc()
tcp_bpf: Remove an unused parameter for bpf_tcp_ingress()
bpf, sockmap: Correct spelling skmsg.c
netkit: Disable netpoll support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
Link: https://patch.msgid.link/20240911211525.13834-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add an interface for the user to notify the kernel that it is done
reading the devmem dmabuf frags returned as cmsg. The kernel will
drop the reference on the frags to make them available for reuse.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Kaiyuan Zhang <kaiyuanz@google.com>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240910171458.219195-11-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In tcp_recvmsg_locked(), detect if the skb being received by the user
is a devmem skb. In this case - if the user provided the MSG_SOCK_DEVMEM
flag - pass it to tcp_recvmsg_devmem() for custom handling.
tcp_recvmsg_devmem() copies any data in the skb header to the linear
buffer, and returns a cmsg to the user indicating the number of bytes
returned in the linear buffer.
tcp_recvmsg_devmem() then loops over the unaccessible devmem skb frags,
and returns to the user a cmsg_devmem indicating the location of the
data in the dmabuf device memory. cmsg_devmem contains this information:
1. the offset into the dmabuf where the payload starts. 'frag_offset'.
2. the size of the frag. 'frag_size'.
3. an opaque token 'frag_token' to return to the kernel when the buffer
is to be released.
The pages awaiting freeing are stored in the newly added
sk->sk_user_frags, and each page passed to userspace is get_page()'d.
This reference is dropped once the userspace indicates that it is
done reading this page. All pages are released when the socket is
destroyed.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Kaiyuan Zhang <kaiyuanz@google.com>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240910171458.219195-10-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For device memory TCP, we expect the skb headers to be available in host
memory for access, and we expect the skb frags to be in device memory
and unaccessible to the host. We expect there to be no mixing and
matching of device memory frags (unaccessible) with host memory frags
(accessible) in the same skb.
Add a skb->devmem flag which indicates whether the frags in this skb
are device memory frags or not.
__skb_fill_netmem_desc() now checks frags added to skbs for net_iov,
and marks the skb as skb->devmem accordingly.
Add checks through the network stack to avoid accessing the frags of
devmem skbs and avoid coalescing devmem skbs with non devmem skbs.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Kaiyuan Zhang <kaiyuanz@google.com>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240910171458.219195-9-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make skb_frag_page() fail in the case where the frag is not backed
by a page, and fix its relevant callers to handle this case.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240910171458.219195-8-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement a memory provider that allocates dmabuf devmem in the form of
net_iov.
The provider receives a reference to the struct netdev_dmabuf_binding
via the pool->mp_priv pointer. The driver needs to set this pointer for
the provider in the net_iov.
The provider obtains a reference on the netdev_dmabuf_binding which
guarantees the binding and the underlying mapping remains alive until
the provider is destroyed.
Usage of PP_FLAG_DMA_MAP is required for this memory provide such that
the page_pool can provide the driver with the dma-addrs of the devmem.
Support for PP_FLAG_DMA_SYNC_DEV is omitted for simplicity & p.order !=
0.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Kaiyuan Zhang <kaiyuanz@google.com>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240910171458.219195-7-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert netmem to be a union of struct page and struct netmem. Overload
the LSB of struct netmem* to indicate that it's a net_iov, otherwise
it's a page.
Currently these entries in struct page are rented by the page_pool and
used exclusively by the net stack:
struct {
unsigned long pp_magic;
struct page_pool *pp;
unsigned long _pp_mapping_pad;
unsigned long dma_addr;
atomic_long_t pp_ref_count;
};
Mirror these (and only these) entries into struct net_iov and implement
netmem helpers that can access these common fields regardless of
whether the underlying type is page or net_iov.
Implement checks for net_iov in netmem helpers which delegate to mm
APIs, to ensure net_iov are never passed to the mm stack.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240910171458.219195-6-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement netdev devmem allocator. The allocator takes a given struct
netdev_dmabuf_binding as input and allocates net_iov from that
binding.
The allocation simply delegates to the binding's genpool for the
allocation logic and wraps the returned memory region in a net_iov
struct.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Kaiyuan Zhang <kaiyuanz@google.com>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240910171458.219195-5-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a netdev_dmabuf_binding struct which represents the
dma-buf-to-netdevice binding. The netlink API will bind the dma-buf to
rx queues on the netdevice. On the binding, the dma_buf_attach
& dma_buf_map_attachment will occur. The entries in the sg_table from
mapping will be inserted into a genpool to make it ready
for allocation.
The chunks in the genpool are owned by a dmabuf_chunk_owner struct which
holds the dma-buf offset of the base of the chunk and the dma_addr of
the chunk. Both are needed to use allocations that come from this chunk.
We create a new type that represents an allocation from the genpool:
net_iov. We setup the net_iov allocation size in the
genpool to PAGE_SIZE for simplicity: to match the PAGE_SIZE normally
allocated by the page pool and given to the drivers.
The user can unbind the dmabuf from the netdevice by closing the netlink
socket that established the binding. We do this so that the binding is
automatically unbound even if the userspace process crashes.
The binding and unbinding leaves an indicator in struct netdev_rx_queue
that the given queue is bound, and the binding is actuated by resetting
the rx queue using the queue API.
The netdev_dmabuf_binding struct is refcounted, and releases its
resources only when all the refs are released.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Kaiyuan Zhang <kaiyuanz@google.com>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # excluding netlink
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240910171458.219195-4-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
API takes the dma-buf fd as input, and binds it to the netdevice. The
user can specify the rx queues to bind the dma-buf to.
Suggested-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240910171458.219195-3-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add netdev_rx_queue_restart(), which resets an rx queue using the
queue API recently merged[1].
The queue API was merged to enable the core net stack to reset individual
rx queues to actuate changes in the rx queue's configuration. In later
patches in this series, we will use netdev_rx_queue_restart() to reset
rx queues after binding or unbinding dmabuf configuration, which will
cause reallocation of the page_pool to repopulate its memory using the
new configuration.
[1] https://lore.kernel.org/netdev/20240430231420.699177-1-shailend@google.com/T/
Signed-off-by: David Wei <dw@davidwei.uk>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240910171458.219195-2-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Several syzbot soft lockup reports all have in common sock_hash_free()
If a map with a large number of buckets is destroyed, we need to yield
the cpu when needed.
Fixes: 75e68e5bf2 ("bpf, sockhash: Synchronize delete from bucket list on map free")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20240906154449.3742932-1-edumazet@google.com
Making tp_btf able to use bpf_dynptr_from_skb(), which is useful for skb
parsing, especially for non-linear paged skb data. This is achieved by
adding KF_TRUSTED_ARGS flag to bpf_dynptr_from_skb and registering it
for TRACING progs. With KF_TRUSTED_ARGS, args from fentry/fexit are
excluded, so that unsafe progs like fexit/__kfree_skb are not allowed.
We also need the skb dynptr to be read-only in tp_btf. Because
may_access_direct_pkt_data() returns false by default when checking
bpf_dynptr_from_skb, there is no need to add BPF_PROG_TYPE_TRACING to it
explicitly.
Suggested-by: Martin KaFai Lau <martin.lau@linux.dev>
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240911033719.91468-5-lulie@linux.alibaba.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ErGl
-----END PGP SIGNATURE-----
Merge tag 'ipsec-next-2024-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2024-09-10
1) Remove an unneeded WARN_ON on packet offload.
From Patrisious Haddad.
2) Add a copy from skb_seq_state to buffer function.
This is needed for the upcomming IPTFS patchset.
From Christian Hopps.
3) Spelling fix in xfrm.h.
From Simon Horman.
4) Speed up xfrm policy insertions.
From Florian Westphal.
5) Add and revert a patch to support xfrm interfaces
for packet offload. This patch was just half cooked.
6) Extend usage of the new xfrm_policy_is_dead_or_sk helper.
From Florian Westphal.
7) Update comments on sdb and xfrm_policy.
From Florian Westphal.
8) Fix a null pointer dereference in the new policy insertion
code From Florian Westphal.
9) Fix an uninitialized variable in the new policy insertion
code. From Nathan Chancellor.
* tag 'ipsec-next-2024-09-10' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: policy: Restore dir assignments in xfrm_hash_rebuild()
xfrm: policy: fix null dereference
Revert "xfrm: add SA information to the offloaded packet"
xfrm: minor update to sdb and xfrm_policy comments
xfrm: policy: use recently added helper in more places
xfrm: add SA information to the offloaded packet
xfrm: policy: remove remaining use of inexact list
xfrm: switch migrate to xfrm_policy_lookup_bytype
xfrm: policy: don't iterate inexact policies twice at insert time
selftests: add xfrm policy insertion speed test script
xfrm: Correct spelling in xfrm.h
net: add copy from skb_seq_state to buffer function
xfrm: Remove documentation WARN_ON to limit return values for offloaded SA
====================
Link: https://patch.msgid.link/20240910065507.2436394-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dev_pick_tx_cpu_id() has been introduced with two users by
commit a4ea8a3dac ("net: Add generic ndo_select_queue functions").
The use in AF_PACKET has been removed in 2019 by
commit b71b5837f8 ("packet: rework packet_pick_tx_queue() to use common code selection")
The other user was a Netlogic XLP driver, removed in 2021 by
commit 47ac6f567c ("staging: Remove Netlogic XLP network driver").
It's relatively unlikely that any modern driver will need an
.ndo_select_queue implementation which picks purely based on CPU ID
and skips XPS, delete dev_pick_tx_cpu_id()
Found by code inspection.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240906161059.715546-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Unmask the upper DSCP bits when calling ip_route_output_key() so that in
the future it could perform the FIB lookup according to the full DSCP
value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Device class has two namespace relevant fields which are associated by
the following usage:
struct class {
...
const struct kobj_ns_type_operations *ns_type;
const void *(*namespace)(const struct device *dev);
...
}
if (dev->class && dev->class->ns_type)
dev->class->namespace(dev);
The usage looks weird since it checks @ns_type but calls namespace()
it is found for all existing class definitions that the other filed is
also assigned once one is assigned in current kernel tree, so fix this
weird usage by checking @namespace to call namespace().
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
netpoll_srcu is currently used from netpoll_poll_disable() and
__netpoll_cleanup()
Both functions run under RTNL, using netpoll_srcu adds confusion
and no additional protection.
Moreover the synchronize_srcu() call in __netpoll_cleanup() is
performed before clearing np->dev->npinfo, which violates RCU rules.
After this patch, netpoll_poll_disable() and netpoll_poll_enable()
simply use rtnl_dereference().
This saves a big chunk of memory (more than 192KB on platforms
with 512 cpus)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20240905084909.2082486-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
list_head can be initialized automatically with LIST_HEAD()
instead of calling INIT_LIST_HEAD(). Here we can simplify
the code.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://patch.msgid.link/20240904093243.3345012-6-lihongbo22@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In commit 6f8b12d661 ("net: napi: add hard irqs deferral feature")
napi_defer_irqs was added to net_device and napi_defer_irqs_count was
added to napi_struct, both as type int.
This value never goes below zero, so there is not reason for it to be a
signed int. Change the type for both from int to u32, and add an
overflow check to sysfs to limit the value to S32_MAX.
The limit of S32_MAX was chosen because the practical limit before this
patch was S32_MAX (anything larger was an overflow) and thus there are
no behavioral changes introduced. If the extra bit is needed in the
future, the limit can be raised.
Before this patch:
$ sudo bash -c 'echo 2147483649 > /sys/class/net/eth4/napi_defer_hard_irqs'
$ cat /sys/class/net/eth4/napi_defer_hard_irqs
-2147483647
After this patch:
$ sudo bash -c 'echo 2147483649 > /sys/class/net/eth4/napi_defer_hard_irqs'
bash: line 0: echo: write error: Numerical result out of range
Similarly, /sys/class/net/XXXXX/tx_queue_len is defined as unsigned:
include/linux/netdevice.h: unsigned int tx_queue_len;
And has an overflow check:
dev_change_tx_queue_len(..., unsigned long new_len):
if (new_len != (unsigned int)new_len)
return -ERANGE;
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240904153431.307932-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When CONFIG_DQL is not enabled, dql_group should be treated as a dead
declaration. However, its current extern declaration assumes the linker
will ignore it, which is generally true across most compiler and
architecture combinations.
But in certain cases, the linker still attempts to resolve the extern
struct, even when the associated code is dead, resulting in a linking
error. For instance the following error in loongarch64:
>> loongarch64-linux-ld: net-sysfs.c:(.text+0x589c): undefined reference to `dql_group'
Modify the declaration of the dead object to be an empty declaration
instead of an extern. This change will prevent the linker from
attempting to resolve an undefined reference.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409012047.eCaOdfQJ-lkp@intel.com/
Fixes: 74293ea1c4 ("net: sysfs: Do not create sysfs for non BQL device")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Link: https://patch.msgid.link/20240902101734.3260455-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
"Interface can't change network namespaces" is rather an attribute,
not a feature, and it can't be changed via Ethtool.
Make it a "cold" private flag instead of a netdev_feature and free
one more bit.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
NETIF_F_LLTX can't be changed via Ethtool and is not a feature,
rather an attribute, very similar to IFF_NO_QUEUE (and hot).
Free one netdev_features_t bit and make it a "hot" private flag.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Make dev->priv_flags `u32` back and define bits higher than 31 as
bitfield booleans as per Jakub's suggestion. This simplifies code
which accesses these bits with no optimization loss (testb both
before/after), allows to not extend &netdev_priv_flags each time,
but also scales better as bits > 63 in the future would only add
a new u64 to the structure with no complications, comparing to
that extending ::priv_flags would require converting it to a bitmap.
Note that I picked `unsigned long :1` to not lose any potential
optimizations comparing to `bool :1` etc.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In commit 27f91aaf49 ("netdev-genl: Add netlink framework functions
for napi"), when an invalid NAPI ID is specified the return value
-EINVAL is used and no extack is set.
Change the return value to -ENOENT and set the extack.
Before this commit:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--do napi-get --json='{"id": 451}'
Netlink error: Invalid argument
nl_len = 36 (20) nl_flags = 0x100 nl_type = 2
error: -22
After this commit:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--do napi-get --json='{"id": 451}'
Netlink error: No such file or directory
nl_len = 44 (28) nl_flags = 0x300 nl_type = 2
error: -2
extack: {'bad-attr': '.id'}
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20240831121707.17562-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Unmask the upper DSCP bits when calling ip_route_output_flow() so that
in the future it could perform the FIB lookup according to the full DSCP
value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The deprecated helper strcpy() performs no bounds checking on the
destination buffer. This could result in linear overflows beyond
the end of the buffer, leading to all kinds of misbehaviors.
The safe replacement is strscpy() [1].
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strcpy [1]
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We do embedd struct fown_struct into struct file letting it take up 32
bytes in total. We could tweak struct fown_struct to be more compact but
really it shouldn't even be embedded in struct file in the first place.
Instead, actual users of struct fown_struct should allocate the struct
on demand. This frees up 24 bytes in struct file.
That will have some potentially user-visible changes for the ownership
fcntl()s. Some of them can now fail due to allocation failures.
Practically, that probably will almost never happen as the allocations
are small and they only happen once per file.
The fown_struct is used during kill_fasync() which is used by e.g.,
pipes to generate a SIGIO signal. Sending of such signals is conditional
on userspace having set an owner for the file using one of the F_OWNER
fcntl()s. Such users will be unaffected if struct fown_struct is
allocated during the fcntl() call.
There are a few subsystems that call __f_setown() expecting
file->f_owner to be allocated:
(1) tun devices
file->f_op->fasync::tun_chr_fasync()
-> __f_setown()
There are no callers of tun_chr_fasync().
(2) tty devices
file->f_op->fasync::tty_fasync()
-> __tty_fasync()
-> __f_setown()
tty_fasync() has no additional callers but __tty_fasync() has. Note
that __tty_fasync() only calls __f_setown() if the @on argument is
true. It's called from:
file->f_op->release::tty_release()
-> tty_release()
-> __tty_fasync()
-> __f_setown()
tty_release() calls __tty_fasync() with @on false
=> __f_setown() is never called from tty_release().
=> All callers of tty_release() are safe as well.
file->f_op->release::tty_open()
-> tty_release()
-> __tty_fasync()
-> __f_setown()
__tty_hangup() calls __tty_fasync() with @on false
=> __f_setown() is never called from tty_release().
=> All callers of __tty_hangup() are safe as well.
From the callchains it's obvious that (1) and (2) end up getting called
via file->f_op->fasync(). That can happen either through the F_SETFL
fcntl() with the FASYNC flag raised or via the FIOASYNC ioctl(). If
FASYNC is requested and the file isn't already FASYNC then
file->f_op->fasync() is called with @on true which ends up causing both
(1) and (2) to call __f_setown().
(1) and (2) are the only subsystems that call __f_setown() from the
file->f_op->fasync() handler. So both (1) and (2) have been updated to
allocate a struct fown_struct prior to calling fasync_helper() to
register with the fasync infrastructure. That's safe as they both call
fasync_helper() which also does allocations if @on is true.
The other interesting case are file leases:
(3) file leases
lease_manager_ops->lm_setup::lease_setup()
-> __f_setown()
Which in turn is called from:
generic_add_lease()
-> lease_manager_ops->lm_setup::lease_setup()
-> __f_setown()
So here again we can simply make generic_add_lease() allocate struct
fown_struct prior to the lease_manager_ops->lm_setup::lease_setup()
which happens under a spinlock.
With that the two remaining subsystems that call __f_setown() are:
(4) dnotify
(5) sockets
Both have their own custom ioctls to set struct fown_struct and both
have been converted to allocate a struct fown_struct on demand from
their respective ioctls.
Interactions with O_PATH are fine as well e.g., when opening a /dev/tty
as O_PATH then no file->f_op->open() happens thus no file->f_owner is
allocated. That's fine as no file operation will be set for those and
the device has never been opened. fcntl()s called on such things will
just allocate a ->f_owner on demand. Although I have zero idea why'd you
care about f_owner on an O_PATH fd.
Link: https://lore.kernel.org/r/20240813-work-f_owner-v2-1-4e9343a79f9f@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
<tldr>
skb network header of the single-tagged vlan packet continues to point the
vlan payload (e.g. IP) after second vlan tag is pushed by tc act_vlan. This
causes problem at the dissector which expects double-tagged packet network
header to point to the inner vlan.
The fix is to adjust network header in tcf_act_vlan.c but requires
refactoring of skb_vlan_push function.
</tldr>
Consider the following shell script snippet configuring TC rules on the
veth interface:
ip link add veth0 type veth peer veth1
ip link set veth0 up
ip link set veth1 up
tc qdisc add dev veth0 clsact
tc filter add dev veth0 ingress pref 10 chain 0 flower \
num_of_vlans 2 cvlan_ethtype 0x800 action goto chain 5
tc filter add dev veth0 ingress pref 20 chain 0 flower \
num_of_vlans 1 action vlan push id 100 \
protocol 0x8100 action goto chain 5
tc filter add dev veth0 ingress pref 30 chain 5 flower \
num_of_vlans 2 cvlan_ethtype 0x800 action simple sdata "success"
Sending double-tagged vlan packet with the IP payload inside:
cat <<ENDS | text2pcap - - | tcpreplay -i veth1 -
0000 00 00 00 00 00 11 00 00 00 00 00 22 81 00 00 64 ..........."...d
0010 81 00 00 14 08 00 45 04 00 26 04 d2 00 00 7f 11 ......E..&......
0020 18 ef 0a 00 00 01 14 00 00 02 00 00 00 00 00 12 ................
0030 e1 c7 00 00 00 00 00 00 00 00 00 00 ............
ENDS
will match rule 10, goto rule 30 in chain 5 and correctly emit "success" to
the dmesg.
OTOH, sending single-tagged vlan packet:
cat <<ENDS | text2pcap - - | tcpreplay -i veth1 -
0000 00 00 00 00 00 11 00 00 00 00 00 22 81 00 00 14 ..........."....
0010 08 00 45 04 00 2a 04 d2 00 00 7f 11 18 eb 0a 00 ..E..*..........
0020 00 01 14 00 00 02 00 00 00 00 00 16 e1 bf 00 00 ................
0030 00 00 00 00 00 00 00 00 00 00 00 00 ............
ENDS
will match rule 20, will push the second vlan tag but will *not* match
rule 30. IOW, the match at rule 30 fails if the second vlan was freshly
pushed by the kernel.
Lets look at __skb_flow_dissect working on the double-tagged vlan packet.
Here is the relevant code from around net/core/flow_dissector.c:1277
copy-pasted here for convenience:
if (dissector_vlan == FLOW_DISSECTOR_KEY_MAX &&
skb && skb_vlan_tag_present(skb)) {
proto = skb->protocol;
} else {
vlan = __skb_header_pointer(skb, nhoff, sizeof(_vlan),
data, hlen, &_vlan);
if (!vlan) {
fdret = FLOW_DISSECT_RET_OUT_BAD;
break;
}
proto = vlan->h_vlan_encapsulated_proto;
nhoff += sizeof(*vlan);
}
The "else" clause above gets the protocol of the encapsulated packet from
the skb data at the network header location. printk debugging has showed
that in the good double-tagged packet case proto is
htons(0x800 == ETH_P_IP) as expected. However in the single-tagged packet
case proto is garbage leading to the failure to match tc filter 30.
proto is being set from the skb header pointed by nhoff parameter which is
defined at the beginning of __skb_flow_dissect
(net/core/flow_dissector.c:1055 in the current version):
nhoff = skb_network_offset(skb);
Therefore the culprit seems to be that the skb network offset is different
between double-tagged packet received from the interface and single-tagged
packet having its vlan tag pushed by TC.
Lets look at the interesting points of the lifetime of the single/double
tagged packets as they traverse our packet flow.
Both of them will start at __netif_receive_skb_core where the first vlan
tag will be stripped:
if (eth_type_vlan(skb->protocol)) {
skb = skb_vlan_untag(skb);
if (unlikely(!skb))
goto out;
}
At this stage in double-tagged case skb->data points to the second vlan tag
while in single-tagged case skb->data points to the network (eg. IP)
header.
Looking at TC vlan push action (net/sched/act_vlan.c) we have the following
code at tcf_vlan_act (interesting points are in square brackets):
if (skb_at_tc_ingress(skb))
[1] skb_push_rcsum(skb, skb->mac_len);
....
case TCA_VLAN_ACT_PUSH:
err = skb_vlan_push(skb, p->tcfv_push_proto, p->tcfv_push_vid |
(p->tcfv_push_prio << VLAN_PRIO_SHIFT),
0);
if (err)
goto drop;
break;
....
out:
if (skb_at_tc_ingress(skb))
[3] skb_pull_rcsum(skb, skb->mac_len);
And skb_vlan_push (net/core/skbuff.c:6204) function does:
err = __vlan_insert_tag(skb, skb->vlan_proto,
skb_vlan_tag_get(skb));
if (err)
return err;
skb->protocol = skb->vlan_proto;
[2] skb->mac_len += VLAN_HLEN;
in the case of pushing the second tag. Lets look at what happens with
skb->data of the single-tagged packet at each of the above points:
1. As a result of the skb_push_rcsum, skb->data is moved back to the start
of the packet.
2. First VLAN tag is moved from the skb into packet buffer, skb->mac_len is
incremented, skb->data still points to the start of the packet.
3. As a result of the skb_pull_rcsum, skb->data is moved forward by the
modified skb->mac_len, thus pointing to the network header again.
Then __skb_flow_dissect will get confused by having double-tagged vlan
packet with the skb->data at the network header.
The solution for the bug is to preserve "skb->data at second vlan header"
semantics in the skb_vlan_push function. We do this by manipulating
skb->network_header rather than skb->mac_len. skb_vlan_push callers are
updated to do skb_reset_mac_len.
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
A sysfs reader can race with a device reset or removal, attempting to
read device state when the device is not actually present. eg:
[exception RIP: qed_get_current_link+17]
#8 [ffffb9e4f2907c48] qede_get_link_ksettings at ffffffffc07a994a [qede]
#9 [ffffb9e4f2907cd8] __rh_call_get_link_ksettings at ffffffff992b01a3
#10 [ffffb9e4f2907d38] __ethtool_get_link_ksettings at ffffffff992b04e4
#11 [ffffb9e4f2907d90] duplex_show at ffffffff99260300
#12 [ffffb9e4f2907e38] dev_attr_show at ffffffff9905a01c
#13 [ffffb9e4f2907e50] sysfs_kf_seq_show at ffffffff98e0145b
#14 [ffffb9e4f2907e68] seq_read at ffffffff98d902e3
#15 [ffffb9e4f2907ec8] vfs_read at ffffffff98d657d1
#16 [ffffb9e4f2907f00] ksys_read at ffffffff98d65c3f
#17 [ffffb9e4f2907f38] do_syscall_64 at ffffffff98a052fb
crash> struct net_device.state ffff9a9d21336000
state = 5,
state 5 is __LINK_STATE_START (0b1) and __LINK_STATE_NOCARRIER (0b100).
The device is not present, note lack of __LINK_STATE_PRESENT (0b10).
This is the same sort of panic as observed in commit 4224cfd7fb
("net-sysfs: add check for netdevice being present to speed_show").
There are many other callers of __ethtool_get_link_ksettings() which
don't have a device presence check.
Move this check into ethtool to protect all callers.
Fixes: d519e17e2d ("net: export device speed and duplex via sysfs")
Fixes: 4224cfd7fb ("net-sysfs: add check for netdevice being present to speed_show")
Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com>
Link: https://patch.msgid.link/8bae218864beaa44ed01628140475b9bf641c5b0.1724393671.git.jamie.bainbridge@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Modify netpoll_setup() and __netpoll_setup() to ensure that the netpoll
structure (np) is left in a clean state if setup fails for any reason.
This prevents carrying over misconfigured fields in case of partial
setup success.
Key changes:
- np->dev is now set only after successful setup, ensuring it's always
NULL if netpoll is not configured or if netpoll_setup() fails.
- np->local_ip is zeroed if netpoll setup doesn't complete successfully.
- Added DEBUG_NET_WARN_ON_ONCE() checks to catch unexpected states.
- Reordered some operations in __netpoll_setup() for better logical flow.
These changes improve the reliability of netpoll configuration, since it
assures that the structure is fully initialized or totally unset.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20240822111051.179850-2-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZsiMrQAKCRDbK58LschI
g1mtAP9wBoNO9sNRrJ2OUg69R5uSTT2//v7icN01xwVtx9ir/AD+PJ+v/WG1QVlM
6GNsPoGtQ53ptuiJFfXEkuVELGqKywY=
=I/T4
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-08-23
We've added 10 non-merge commits during the last 15 day(s) which contain
a total of 10 files changed, 222 insertions(+), 190 deletions(-).
The main changes are:
1) Add TCP_BPF_SOCK_OPS_CB_FLAGS to bpf_*sockopt() to address the case
when long-lived sockets miss a chance to set additional callbacks
if a sockops program was not attached early in their lifetime,
from Alan Maguire.
2) Add a batch of BPF selftest improvements which fix a few bugs and add
missing features to improve the test coverage of sockmap/sockhash,
from Michal Luczaj.
3) Fix a false-positive Smatch-reported off-by-one in tcp_validate_cookie()
which is part of the test_tcp_custom_syncookie BPF selftest,
from Kuniyuki Iwashima.
4) Fix the flow_dissector BPF selftest which had a bug in IP header's
tot_len calculation doing subtraction after htons() instead of inside
htons(), from Asbjørn Sloth Tønnesen.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftest: bpf: Remove mssind boundary check in test_tcp_custom_syncookie.c.
selftests/bpf: Introduce __attribute__((cleanup)) in create_pair()
selftests/bpf: Exercise SOCK_STREAM unix_inet_redir_to_connected()
selftests/bpf: Honour the sotype of af_unix redir tests
selftests/bpf: Simplify inet_socketpair() and vsock_socketpair_connectible()
selftests/bpf: Socket pair creation, cleanups
selftests/bpf: Support more socket types in create_pair()
selftests/bpf: Avoid subtraction after htons() in ipip tests
selftests/bpf: add sockopt tests for TCP_BPF_SOCK_OPS_CB_FLAGS
bpf/bpf_get,set_sockopt: add option to set TCP-BPF sock ops flags
====================
Link: https://patch.msgid.link/20240823134959.1091-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=O8tu
-----END PGP SIGNATURE-----
Merge tag 'nf-next-24-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following batch contains Netfilter updates for net-next:
Patch #1 fix checksum calculation in nfnetlink_queue with SCTP,
segment GSO packet since skb_zerocopy() does not support
GSO_BY_FRAGS, from Antonio Ojea.
Patch #2 extend nfnetlink_queue coverage to handle SCTP packets,
from Antonio Ojea.
Patch #3 uses consume_skb() instead of kfree_skb() in nfnetlink,
from Donald Hunter.
Patch #4 adds a dedicate commit list for sets to speed up
intra-transaction lookups, from Florian Westphal.
Patch #5 skips removal of element from abort path for the pipapo
backend, ditching the shadow copy of this datastructure
is sufficient.
Patch #6 moves nf_ct_netns_get() out of nf_conncount_init() to
let users of conncoiunt decide when to enable conntrack,
this is needed by openvswitch, from Xin Long.
Patch #7 pass context to all nft_parse_register_load() in
preparation for the next patch.
Patches #8 and #9 reject loads from uninitialized registers from
control plane to remove register initialization from
datapath. From Florian Westphal.
* tag 'nf-next-24-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nf_tables: don't initialize registers in nft_do_chain()
netfilter: nf_tables: allow loads only when register is initialized
netfilter: nf_tables: pass context structure to nft_parse_register_load
netfilter: move nf_ct_netns_get out of nf_conncount_init
netfilter: nf_tables: do not remove elements if set backend implements .abort
netfilter: nf_tables: store new sets in dedicated list
netfilter: nfnetlink: convert kfree_skb to consume_skb
selftests: netfilter: nft_queue.sh: sctp coverage
netfilter: nfnetlink_queue: unbreak SCTP traffic
====================
Link: https://patch.msgid.link/20240822221939.157858-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When net devices propagate xdp configurations to slave devices,
we will need to perform a memory provider check to ensure we're
not binding xdp to a device using unreadable netmem.
Currently the ->ndo_bpf calls in a few places. Adding checks to all
these places would not be ideal.
Refactor all the ->ndo_bpf calls into one place where we can add this
check in the future.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The initial value of err is -ENOBUFS, and err is guaranteed to be
less than 0 before all goto errout. Therefore, on the error path
of errout, there is no need to repeatedly judge that err is less than 0,
and delete redundant judgments to make the code more concise.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The initial value of err is -ENOBUFS, and err is guaranteed to be
less than 0 before all goto errout. Therefore, on the error path
of errout, there is no need to repeatedly judge that err is less than 0,
and delete redundant judgments to make the code more concise.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The initial value of err is -ENOMEM, and err is guaranteed to be
less than 0 before all goto errout. Therefore, on the error path
of errout, there is no need to repeatedly judge that err is less than 0,
and delete redundant judgments to make the code more concise.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Link topologies containing multiple network PHYs attached to the same
net_device can be found when using a PHY as a media converter for use
with an SFP connector, on which an SFP transceiver containing a PHY can
be used.
With the current model, the transceiver's PHY can't be used for
operations such as cable testing, timestamping, macsec offload, etc.
The reason being that most of the logic for these configuration, coming
from either ethtool netlink or ioctls tend to use netdev->phydev, which
in multi-phy systems will reference the PHY closest to the MAC.
Introduce a numbering scheme allowing to enumerate PHY devices that
belong to any netdev, which can in turn allow userspace to take more
precise decisions with regard to each PHY's configuration.
The numbering is maintained per-netdev, in a phy_device_list.
The numbering works similarly to a netdevice's ifindex, with
identifiers that are only recycled once INT_MAX has been reached.
This prevents races that could occur between PHY listing and SFP
transceiver removal/insertion.
The identifiers are assigned at phy_attach time, as the numbering
depends on the netdevice the phy is attached to. The PHY index can be
re-used for PHYs that are persistent.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
I have seen the WARN_ON(smp_processor_id() != cpu) firing
in pktgen_thread_worker() during tests.
We must use cpus_read_lock()/cpus_read_unlock()
around the for_each_online_cpu(cpu) loop.
While we are at it use WARN_ON_ONCE() to avoid a possible syslog flood.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240821175339.1191779-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/broadcom/bnxt/bnxt.h
c948c0973d ("bnxt_en: Don't clear ntuple filters and rss contexts during ethtool ops")
f2878cdeb7 ("bnxt_en: Add support to call FW to update a VNIC")
Link: https://patch.msgid.link/20240822210125.1542769-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The helper performs a FIB lookup according to the parameters in the
'params' argument, one of which is 'tos'. According to the test in
test_tc_neigh_fib.c, it seems that BPF programs are expected to
initialize the 'tos' field to the full 8 bit DS field from the IPv4
header.
Unmask the upper DSCP bits before invoking the IPv4 FIB lookup APIs so
that in the future the lookup could be performed according to the full
DSCP value.
No functional changes intended since the upper DSCP bits are masked when
comparing against the TOS selectors in FIB rules and routes.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240821125251.1571445-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
