With SME we require that fine grained traps on access to TPIDR2_EL0 and
SMPRI_EL1 are disabled but did not document that fact. Add the relevant
register bits.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221101112716.52035-2-broonie@kernel.org
- fix lock initialization race in gfn-to-pfn cache (+selftests)
- fix two refcounting errors
- emulator fixes
- mask off reserved bits in CPUID
- fix bug with disabling SGX
RISC-V:
- update MAINTAINERS
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmNcYawUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPMzwf/Uh1lO2Op6IJ3/no2gPfShc9bdqgM
LiCkzfJp9PQAuDl/hs44CiQHUlPEfeIsI/ns0euNj37TlnB3zKmm46mtiWhEefIH
rwcm/ngKgw3283pZEf8FeMTDfNexOaBg2ZNoODR7JQsU50tbToY4TNE2nNRgbdL5
SNmzOwox1rZIQHxEa2r/k2B/HdRbeCFUU82EjwFqaNzH1yhzBXMcokdSCmGCBMsE
3xfCzQ7uMkXw/rlkkG0be65+5dTNmhfiKQYGAQe4s7PycVPMD79D2EhCfbpvbK7t
EmgOXStmvtW6+ukqPATHbRVCDwW0VmiQv5IWOGbLB1Qdy5/REynJ5ObC8g==
=Hvro
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"x86:
- fix lock initialization race in gfn-to-pfn cache (+selftests)
- fix two refcounting errors
- emulator fixes
- mask off reserved bits in CPUID
- fix bug with disabling SGX
RISC-V:
- update MAINTAINERS"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/xen: Fix eventfd error handling in kvm_xen_eventfd_assign()
KVM: x86: smm: number of GPRs in the SMRAM image depends on the image format
KVM: x86: emulator: update the emulation mode after CR0 write
KVM: x86: emulator: update the emulation mode after rsm
KVM: x86: emulator: introduce emulator_recalc_and_set_mode
KVM: x86: emulator: em_sysexit should update ctxt->mode
KVM: selftests: Mark "guest_saw_irq" as volatile in xen_shinfo_test
KVM: selftests: Add tests in xen_shinfo_test to detect lock races
KVM: Reject attempts to consume or refresh inactive gfn_to_pfn_cache
KVM: Initialize gfn_to_pfn_cache locks in dedicated helper
KVM: VMX: fully disable SGX if SECONDARY_EXEC_ENCLS_EXITING unavailable
KVM: x86: Exempt pending triple fault from event injection sanity check
MAINTAINERS: git://github -> https://github.com for kvm-riscv
KVM: debugfs: Return retval of simple_attr_open() if it fails
KVM: x86: Reduce refcount if single_open() fails in kvm_mmu_rmaps_stat_open()
KVM: x86: Mask off reserved bits in CPUID.8000001FH
KVM: x86: Mask off reserved bits in CPUID.8000001AH
KVM: x86: Mask off reserved bits in CPUID.80000008H
KVM: x86: Mask off reserved bits in CPUID.80000006H
KVM: x86: Mask off reserved bits in CPUID.80000001H
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)
iEYEABECAAYFAmNg1YcACgkQ+iyteGJfRsoBNQCgyixgNdLK31WFtoanRlo++KuO
4csAnjnJ0BdMwJj13TBfv3B107RYpxrd
=L7M+
-----END PGP SIGNATURE-----
Merge tag 'linux-watchdog-6.1-rc4' of git://www.linux-watchdog.org/linux-watchdog
Pull watchdog fixes from Wim Van Sebroeck:
- fix use after free in exar driver
- spelling fix in comment
* tag 'linux-watchdog-6.1-rc4' of git://www.linux-watchdog.org/linux-watchdog:
drivers: watchdog: exar_wdt.c fix use after free
watchdog: sp805_wdt: fix spelling typo in comment
The TDG.VP.INFO TDCALL provides the guest with various details about
the TDX system that the guest needs to run. Only one field is currently
used: 'gpa_width' which tells the guest which PTE bits mark pages shared
or private.
A second field is now needed: the guest "TD attributes" to tell if
virtualization exceptions are configured in a way that can harm the guest.
Make the naming and calling convention more generic and discrete from the
mask-centric one.
Thanks to Sathya for the inspiration here, but there's no code, comments
or changelogs left from where he started.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: stable@vger.kernel.org
Fuzz testing of the refcount btree demonstrated a weakness in validation
of refcount btree records during normal runtime. The idea of using the
upper bit of the rc_startblock field to separate the refcount records
into one group for shared space and another for CoW staging extents was
added at the last minute. The incore struct left this bit encoded in
the upper bit of the startblock field, which makes it all too easy for
arithmetic operations to overflow if we don't detect the cowflag
properly.
When I ran a norepair fuzz tester, I was able to crash the kernel on one
of these accidental overflows by fuzzing a key record in a node block,
which broke lookups. To fix the problem, make the domain (shared/cow) a
separate field in the incore record.
Unfortunately, a customer also hit this once in production. Due to bugs
in the kernel running on the VM host, writes to the disk image would
occasionally be lost. Given sufficient memory pressure on the VM guest,
a refcountbt xfs_buf could be reclaimed and later reloaded from the
stale copy on the virtual disk. The stale disk contents were a refcount
btree leaf block full of records for the wrong domain, and this caused
an infinite loop in the guest VM.
v2: actually include the refcount adjust loop invariant checking patch;
move the deferred refcount continuation checks earlier in the series;
break up the megapatch into smaller pieces; fix an uninitialized list
error.
v3: in the continuation check patch, verify the per-ag extent before
converting it to a fsblock
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----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=PiZA
-----END PGP SIGNATURE-----
Merge tag 'refcount-cow-domain-6.1_2022-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.1-fixesA
xfs: improve runtime refcountbt corruption detection
Fuzz testing of the refcount btree demonstrated a weakness in validation
of refcount btree records during normal runtime. The idea of using the
upper bit of the rc_startblock field to separate the refcount records
into one group for shared space and another for CoW staging extents was
added at the last minute. The incore struct left this bit encoded in
the upper bit of the startblock field, which makes it all too easy for
arithmetic operations to overflow if we don't detect the cowflag
properly.
When I ran a norepair fuzz tester, I was able to crash the kernel on one
of these accidental overflows by fuzzing a key record in a node block,
which broke lookups. To fix the problem, make the domain (shared/cow) a
separate field in the incore record.
Unfortunately, a customer also hit this once in production. Due to bugs
in the kernel running on the VM host, writes to the disk image would
occasionally be lost. Given sufficient memory pressure on the VM guest,
a refcountbt xfs_buf could be reclaimed and later reloaded from the
stale copy on the virtual disk. The stale disk contents were a refcount
btree leaf block full of records for the wrong domain, and this caused
an infinite loop in the guest VM.
v2: actually include the refcount adjust loop invariant checking patch;
move the deferred refcount continuation checks earlier in the series;
break up the megapatch into smaller pieces; fix an uninitialized list
error.
v3: in the continuation check patch, verify the per-ag extent before
converting it to a fsblock
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
* tag 'refcount-cow-domain-6.1_2022-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: rename XFS_REFC_COW_START to _COWFLAG
xfs: fix uninitialized list head in struct xfs_refcount_recovery
xfs: fix agblocks check in the cow leftover recovery function
xfs: check record domain when accessing refcount records
xfs: remove XFS_FIND_RCEXT_SHARED and _COW
xfs: refactor domain and refcount checking
xfs: report refcount domain in tracepoints
xfs: track cow/shared record domains explicitly in xfs_refcount_irec
xfs: refactor refcount record usage in xchk_refcountbt_rec
xfs: move _irec structs to xfs_types.h
xfs: check deferred refcount op continuation parameters
xfs: create a predicate to verify per-AG extents
xfs: make sure aglen never goes negative in xfs_refcount_adjust_extents
If an error occurs after the first kzalloc() the corresponding memory
allocation is never freed.
Add the missing kfree() in the error handling path, as already done in the
remove() function.
Fixes: 7e773594da ("sfc: Separate efx_nic memory from net_device memory")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/dc114193121c52c8fa3779e49bdd99d4b41344a9.1667077009.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The trapping of SMPRI_EL1 and TPIDR2_EL0 currently only really
work on nVHE, as only this mode uses the fine-grained trapping
that controls these two registers.
Move the trapping enable/disable code into
__{de,}activate_traps_common(), allowing it to be called when it
actually matters on VHE, and remove the flipping of EL2 control
for TPIDR2_EL0, which only affects the host access of this
register.
Fixes: 861262ab86 ("KVM: arm64: Handle SME host state when running guests")
Reported-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/86bkpqer4z.wl-maz@kernel.org
The mode_valid field in drm_connector_helper_funcs is expected to be of
type:
enum drm_mode_status (* mode_valid) (struct drm_connector *connector,
struct drm_display_mode *mode);
The mismatched return type breaks forward edge kCFI since the underlying
function definition does not match the function hook definition.
The return type of imx_tve_connector_mode_valid should be changed from
int to enum drm_mode_status.
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1703
Cc: llvm@lists.linux.dev
Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220913205544.155106-1-nhuck@google.com
A duplicated line 'select DRM_KMS_HELPER' was introduced in Kconfig file
by commit 09717af7d1 ("drm: Remove CONFIG_DRM_KMS_CMA_HELPER option"),
so remove it.
Fixes: 09717af7d1 ("drm: Remove CONFIG_DRM_KMS_CMA_HELPER option")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221009023527.3669647-1-victor.liu@nxp.com
Dell Vostro 5568 laptop has lis3lv02d, but its i2c address is not known
to the kernel. Add this address.
Output of "cat /sys/devices/platform/lis3lv02d/position" on Dell Vostro
5568 laptop:
- Horizontal: (-18,0,1044)
- Front elevated: (522,-18,1080)
- Left elevated: (-18,-360,1080)
- Upside down: (36,108,-1134)
Signed-off-by: Nam Cao <namcaov@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
When the I2C controllers are running in DMA mode, it is the DMA engine
that performs the memory accesses rather than the I2C controller. Pass
the DMA engine's struct device pointer to the DMA API to make sure the
correct DMA operations are used.
This fixes an issue where the DMA engine's SMMU stream ID needs to be
misleadingly set for the I2C controllers in device tree.
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
In piix4_probe(), the piix4 adapter will be registered in:
piix4_probe()
piix4_add_adapters_sb800() / piix4_add_adapter()
i2c_add_adapter()
Based on the probed device type, piix4_add_adapters_sb800() or single
piix4_add_adapter() will be called.
For the former case, piix4_adapter_count is set as the number of adapters,
while for antoher case it is not set and kept default *zero*.
When piix4 is removed, piix4_remove() removes the adapters added in
piix4_probe(), basing on the piix4_adapter_count value.
Because the count is zero for the single adapter case, the adapter won't
be removed and makes the sources allocated for adapter leaked, such as
the i2c client and device.
These sources can still be accessed by i2c or bus and cause problems.
An easily reproduced case is that if a new adapter is registered, i2c
will get the leaked adapter and try to call smbus_algorithm, which was
already freed:
Triggered by: rmmod i2c_piix4 && modprobe max31730
BUG: unable to handle page fault for address: ffffffffc053d860
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
Oops: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 3752 Comm: modprobe Tainted: G
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
RIP: 0010:i2c_default_probe (drivers/i2c/i2c-core-base.c:2259) i2c_core
RSP: 0018:ffff888107477710 EFLAGS: 00000246
...
<TASK>
i2c_detect (drivers/i2c/i2c-core-base.c:2302) i2c_core
__process_new_driver (drivers/i2c/i2c-core-base.c:1336) i2c_core
bus_for_each_dev (drivers/base/bus.c:301)
i2c_for_each_dev (drivers/i2c/i2c-core-base.c:1823) i2c_core
i2c_register_driver (drivers/i2c/i2c-core-base.c:1861) i2c_core
do_one_initcall (init/main.c:1296)
do_init_module (kernel/module/main.c:2455)
...
</TASK>
---[ end trace 0000000000000000 ]---
Fix this problem by correctly set piix4_adapter_count as 1 for the
single adapter so it can be normally removed.
Fixes: 528d53a159 ("i2c: piix4: Fix probing of reserved ports on AMD Family 16h Model 30h")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
When thermnal zones are defined, trip points definitions are mandatory.
Define a couple of critical trip points for monitoring of existing
PMIC and SOC thermal zones.
This was lost between txt to yaml conversion and was re-enforced recently
via the commit 8c59632423 ("dt-bindings: thermal: Fix missing required property")
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Fixes: f7b636a8d8 ("arm64: dts: juno: add thermal zones for scpi sensors")
Link: https://lore.kernel.org/r/20221028140833.280091-8-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Use devres to allocate the dedicated deferred_tx_wq polling workqueue so
as to automatically trigger the proper resource release on error path.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 5a3b7185c4 ("firmware: arm_scmi: Add atomic mode support to virtio transport")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20221028140833.280091-6-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
SCMI virtio transport device managed allocations must use the main
platform device in devres operations instead of the channel devices.
Cc: Peter Hilber <peter.hilber@opensynergy.com>
Fixes: 46abe13b5e ("firmware: arm_scmi: Add virtio transport")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20221028140833.280091-5-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
SCMI Rx channels are optional and they can fail to be setup when not
present but anyway channels setup routines must bail-out on memory errors.
Make channels setup, and related probing, fail when memory errors are
reported on Rx channels.
Fixes: 5c8a47a5a9 ("firmware: arm_scmi: Make scmi core independent of the transport type")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20221028140833.280091-4-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
SCMI transports based on shared memory, at start of transmissions, have
to wait for the shared Tx channel area to be eventually freed by the
SCMI platform before accessing the channel. In fact the channel is owned
by the SCMI platform until marked as free by the platform itself and,
as such, cannot be used by the agent until relinquished.
As a consequence a badly misbehaving SCMI platform firmware could lock
the channel indefinitely and make the kernel side SCMI stack loop
forever waiting for such channel to be freed, possibly hanging the
whole boot sequence.
Add a timeout to the existent Tx waiting spin-loop so that, when the
system ends up in this situation, the SCMI stack can at least bail-out,
nosily warn the user, and abort the transmission.
Reported-by: YaxiongTian <iambestgod@outlook.com>
Suggested-by: YaxiongTian <iambestgod@outlook.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Etienne Carriere <etienne.carriere@linaro.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20221028140833.280091-3-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Suppress the capability to unbind the core SCMI driver since all the
SCMI stack protocol drivers depend on it.
Fixes: aa4f886f38 ("firmware: arm_scmi: add basic driver infrastructure for SCMI")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20221028140833.280091-2-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Platform drivers .remove callbacks are not supposed to fail and report
errors. Such errors are indeed ignored by the core platform drivers
and the driver unbind process is anyway completed.
The SCMI core platform driver as it is now, instead, bails out reporting
an error in case of an explicit unbind request.
Fix the removal path by adding proper device links between the core SCMI
device and the SCMI protocol devices so that a full SCMI stack unbind is
triggered when the core driver is removed. The remove process does not
bail out anymore on the anomalous conditions triggered by an explicit
unbind but the user is still warned.
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20221028140833.280091-1-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Recent changes to the thermal framework has made the trip
points (trips) for thermal zones compulsory, which made
the Ux500 DTS files break validation and also stopped
probing because of similar changes to the code.
Fix this by adding an "outer bounding box": battery thermal
zones should not get warmer than 70 degress, then we will
shut down.
Fixes: 8c59632423 ("dt-bindings: thermal: Fix missing required property")
Fixes: 3fd6d6e2b4 ("thermal/of: Rework the thermal device tree initialization")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: linux-pm@vger.kernel.org
Link: https://lore.kernel.org/r/20221030210854.346662-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Fix imx93-pd driver to release resources when error occurs in probe.
- A series from Ioana Ciornei to add missing clock frequencies for MDIO
controllers on LayerScape SoCs, so that the kernel driver can work
independently from bootloader.
- A series from Li Jun to fix USB power domain setup in i.MX8MM/N device
trees.
- Fix CPLD_Dn pull configuration for MX8Menlo board to avoid interfering
with CPLD power off functionality.
- Fix ctrl_sleep_moci GPIO setup for verdin-imx8mp board.
- Fix DT schema check warnings on uSDHC clocks for imx8-ss-conn device
tree.
- Fix up gpcv2 DT bindings to have an optional `power-domains` property.
- A couple of i.MX93 device tree fixes on S4MU interrupt and gpio-ranges
of GPIO controllers.
- Keep PU regulator on for Quad and QuadPlus based imx6dl-yapp4 boards to
work around a hardware design flaw in supply voltage distribution.
- Fix user push-button GPIO offset on imx6qdl-gw59 boards.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmNgjiEUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM4anAgAmZ5lSvXKhlaYijN7DSh9WlpwDcf1
BRGAoT94d2C0rv1+lPKaEcSCJAo7/jqiMUgNorUVhlwR9frJIJK9HvNkfzJ66vQ9
DRksUZjomlIuefaOWdja18ZZD6WuPoe95pjW2ssB/A2zAmKYxtSoqiHsPfnzRtp1
yaBa1DyKBodVp+Eo0HT9Cyg1gBbPaHDex4D/v852UaBQ3J297phykeFrL/FjwsZT
ojAlK30sEb5LOBvcBnQxus1f0EhaB+sjapAsNMX0vaEkx49zO+fOEDa2I/vBXbA8
NF/jOf87pl9QeYkVDGKlP4EtTbXKObsVOfSFc05C1gT68FUGUbGF2pX/3g==
=YELK
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmNhAQoACgkQmmx57+YA
GNknHQ/9ENt7IOQmPPYPF+9jsEE6YtlzPSO40hdbgTcQM94qFN2mQUYRTf9kBzr+
Gaeot/CE9cZEj5ZlN0qSUK/NWsIfHNiMmCMCTrEB9hqjJqyKfPrWjUD2CaAnORii
za1Qma7IBrSc0wfiNNx0ZIiWeJluPYw5iw9BgF7HlHOYd81Rs6ZAxDjT0nwa81NN
DjzpIswc7dFQSJU6mgJ20tEPvthZBRRlDnI4zdzr84hVovizCMF6UfM3K+XfM5Tb
lJMuLC1w3uCVqS6v3+MpZJABg3qFZwB7TqRI+fS/W+R+w21EGkhzpo8OqqpSULYJ
4HHrd4Gw1QItue8dVqbqNSTBJNo0lpUvcFKOoNPh0kUuUwRgoxOWKE+EowLpqaNO
6Judyy4KWTTBv3YyBSF0AVEy/wuQDsv4wj//cttHOrWZKcEnF3t9EiKEBzu0f7b9
u4dVVw6aOlF/bv7CoOXwhUK79Dm2XOV6NseXKGPGkCdWZNg+bwojKjDIy80sjL7i
3YR0ggDCb5rN+eioKp04l//qaKbw6cr8FtW7AjfXASfqgHojcyh8UXu0PIuMKRNW
jod9rP2HFKV8+gLVl/Ax4T9GWyKAbBtogzR+J+77MZXZ5+hbZa4e7CEtHy3feHzC
d52+kjPqOLiW8CfhgNbTYeWkNhz+qSF1ea8I7AjpyUurWNtlVf4=
=W2eO
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.1:
- Fix imx93-pd driver to release resources when error occurs in probe.
- A series from Ioana Ciornei to add missing clock frequencies for MDIO
controllers on LayerScape SoCs, so that the kernel driver can work
independently from bootloader.
- A series from Li Jun to fix USB power domain setup in i.MX8MM/N device
trees.
- Fix CPLD_Dn pull configuration for MX8Menlo board to avoid interfering
with CPLD power off functionality.
- Fix ctrl_sleep_moci GPIO setup for verdin-imx8mp board.
- Fix DT schema check warnings on uSDHC clocks for imx8-ss-conn device
tree.
- Fix up gpcv2 DT bindings to have an optional `power-domains` property.
- A couple of i.MX93 device tree fixes on S4MU interrupt and gpio-ranges
of GPIO controllers.
- Keep PU regulator on for Quad and QuadPlus based imx6dl-yapp4 boards to
work around a hardware design flaw in supply voltage distribution.
- Fix user push-button GPIO offset on imx6qdl-gw59 boards.
* tag 'imx-fixes-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: ls208xa: specify clock frequencies for the MDIO controllers
arm64: dts: ls1088a: specify clock frequencies for the MDIO controllers
arm64: dts: lx2160a: specify clock frequencies for the MDIO controllers
soc: imx: imx93-pd: Fix the error handling path of imx93_pd_probe()
arm64: dts: imx93: correct gpio-ranges
arm64: dts: imx93: correct s4mu interrupt names
dt-bindings: power: gpcv2: add power-domains property
arm64: dts: imx8: correct clock order
ARM: dts: imx6dl-yapp4: Do not allow PM to switch PU regulator off on Q/QP
ARM: dts: imx6qdl-gw59{10,13}: fix user pushbutton GPIO offset
arm64: dts: imx8mn: Correct the usb power domain
arm64: dts: imx8mn: remove otg1 power domain dependency on hsio
arm64: dts: imx8mm: correct usb power domains
arm64: dts: imx8mm: remove otg1/2 power domain dependency on hsio
arm64: dts: verdin-imx8mp: fix ctrl_sleep_moci
arm64: dts: imx8mm: Enable CPLD_Dn pull down resistor on MX8Menlo
Link: https://lore.kernel.org/r/20221101031547.GB125525@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
No need to postpone this to the commit release path, since no packets
are walking over this object, this is accessed from control plane only.
This helped uncovered UAF triggered by races with the netlink notifier.
Fixes: 9dd732e0bd ("netfilter: nf_tables: memleak flow rule from commit path")
Reported-by: syzbot+8f747f62763bc6c32916@syzkaller.appspotmail.com
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
commit release path is invoked via call_rcu and it runs lockless to
release the objects after rcu grace period. The netlink notifier handler
might win race to remove objects that the transaction context is still
referencing from the commit release path.
Call rcu_barrier() to ensure pending rcu callbacks run to completion
if the list of transactions to be destroyed is not empty.
Fixes: 6001a930ce ("netfilter: nftables: introduce table ownership")
Reported-by: syzbot+8f747f62763bc6c32916@syzkaller.appspotmail.com
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
On 32-bit kernels, 64-bit syscall arguments are split into two
registers. For that to work with syscall wrappers, the prototype of the
syscall must have the argument split so that the wrapper macro properly
unpacks the arguments from pt_regs.
The fanotify_mark() syscall is one such syscall, which already has a
split prototype, guarded behind ARCH_SPLIT_ARG64.
So select ARCH_SPLIT_ARG64 to get that prototype and fix fanotify_mark()
on 32-bit kernels with syscall wrappers.
Note also that fanotify_mark() is the only usage of ARCH_SPLIT_ARG64.
Fixes: 7e92e01b72 ("powerpc: Provide syscall wrapper")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221101034852.2340319-1-mpe@ellerman.id.au
Recently, we got two syzkaller problems because of oversize packet
when napi frags enabled.
One of the problems is because the first seg size of the iov_iter
from user space is very big, it is 2147479538 which is bigger than
the threshold value for bail out early in __alloc_pages(). And
skb->pfmemalloc is true, __kmalloc_reserve() would use pfmemalloc
reserves without __GFP_NOWARN flag. Thus we got a warning as following:
========================================================
WARNING: CPU: 1 PID: 17965 at mm/page_alloc.c:5295 __alloc_pages+0x1308/0x16c4 mm/page_alloc.c:5295
...
Call trace:
__alloc_pages+0x1308/0x16c4 mm/page_alloc.c:5295
__alloc_pages_node include/linux/gfp.h:550 [inline]
alloc_pages_node include/linux/gfp.h:564 [inline]
kmalloc_large_node+0x94/0x350 mm/slub.c:4038
__kmalloc_node_track_caller+0x620/0x8e4 mm/slub.c:4545
__kmalloc_reserve.constprop.0+0x1e4/0x2b0 net/core/skbuff.c:151
pskb_expand_head+0x130/0x8b0 net/core/skbuff.c:1654
__skb_grow include/linux/skbuff.h:2779 [inline]
tun_napi_alloc_frags+0x144/0x610 drivers/net/tun.c:1477
tun_get_user+0x31c/0x2010 drivers/net/tun.c:1835
tun_chr_write_iter+0x98/0x100 drivers/net/tun.c:2036
The other problem is because odd IPv6 packets without NEXTHDR_NONE
extension header and have big packet length, it is 2127925 which is
bigger than ETH_MAX_MTU(65535). After ipv6_gso_pull_exthdrs() in
ipv6_gro_receive(), network_header offset and transport_header offset
are all bigger than U16_MAX. That would trigger skb->network_header
and skb->transport_header overflow error, because they are all '__u16'
type. Eventually, it would affect the value for __skb_push(skb, value),
and make it be a big value. After __skb_push() in ipv6_gro_receive(),
skb->data would less than skb->head, an out of bounds memory bug occurred.
That would trigger the problem as following:
==================================================================
BUG: KASAN: use-after-free in eth_type_trans+0x100/0x260
...
Call trace:
dump_backtrace+0xd8/0x130
show_stack+0x1c/0x50
dump_stack_lvl+0x64/0x7c
print_address_description.constprop.0+0xbc/0x2e8
print_report+0x100/0x1e4
kasan_report+0x80/0x120
__asan_load8+0x78/0xa0
eth_type_trans+0x100/0x260
napi_gro_frags+0x164/0x550
tun_get_user+0xda4/0x1270
tun_chr_write_iter+0x74/0x130
do_iter_readv_writev+0x130/0x1ec
do_iter_write+0xbc/0x1e0
vfs_writev+0x13c/0x26c
To fix the problems, restrict the packet size less than
(ETH_MAX_MTU - NET_SKB_PAD - NET_IP_ALIGN) which has considered reserved
skb space in napi_alloc_skb() because transport_header is an offset from
skb->head. Add len check in tun_napi_alloc_frags() simply.
Fixes: 90e33d4594 ("tun: enable napi_gro_frags() for TUN/TAP driver")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20221029094101.1653855-1-william.xuanziyang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Changed maintainers for vnic driver, since Dany has new responsibilities.
Also added Nick Child as reviewer.
Signed-off-by: Rick Lindsley <ricklind@us.ibm.com>
Link: https://lore.kernel.org/r/20221028203509.4070154-1-ricklind@us.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
blk_mq_flush_plug_list() empties ->mq_list and request we'd peeked there
before that call is gone; in any case, we are not dealing with a mix
of requests for different queues now - there's no requests left in the
plug.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With the introduction of syscall wrappers all wrappers for syscalls with
64-bit arguments must be handled specially, not only those that have
unaligned 64-bit arguments. This left out the fallocate() and
sync_file_range2() syscalls.
Fixes: 7e92e01b72 ("powerpc: Provide syscall wrapper")
Fixes: e237506238 ("powerpc/32: fix syscall wrappers with 64-bit arguments of unaligned register-pairs")
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/87mt9cxd6g.fsf_-_@igel.home
The macros are defined backwards.
This affects the following compat syscalls:
- compat_sys_truncate64()
- compat_sys_ftruncate64()
- compat_sys_fallocate()
- compat_sys_sync_file_range()
- compat_sys_fadvise64_64()
- compat_sys_readahead()
- compat_sys_pread64()
- compat_sys_pwrite64()
Fixes: 43d5de2b67 ("asm-generic: compat: Support BE for long long args in 32-bit ABIs")
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
[mpe: Add list of affected syscalls]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/871qqoyvni.fsf_-_@igel.home
-----BEGIN PGP SIGNATURE-----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=3tvc
-----END PGP SIGNATURE-----
Merge tag 'for-6.1-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more fixes and regression fixes:
- fix a corner case when handling tree-mod-log chagnes in reallocated
notes
- fix crash on raid0 filesystems created with <5.4 mkfs.btrfs that
could lead to division by zero
- add missing super block checksum verification after thawing
filesystem
- handle one more case in send when dealing with orphan files
- fix parameter type mismatch for generation when reading dentry
- improved error handling in raid56 code
- better struct bio packing after recent cleanups"
* tag 'for-6.1-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: don't use btrfs_chunk::sub_stripes from disk
btrfs: fix type of parameter generation in btrfs_get_dentry
btrfs: send: fix send failure of a subcase of orphan inodes
btrfs: make thaw time super block check to also verify checksum
btrfs: fix tree mod log mishandling of reallocated nodes
btrfs: reorder btrfs_bio for better packing
btrfs: raid56: avoid double freeing for rbio if full_stripe_write() failed
btrfs: raid56: properly handle the error when unable to find the missing stripe
-----BEGIN PGP SIGNATURE-----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=L2Xt
-----END PGP SIGNATURE-----
Merge tag 'lsm-pr-20221031' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull LSM fix from Paul Moore:
"A single patch to the capabilities code to fix a potential memory leak
in the xattr allocation error handling"
* tag 'lsm-pr-20221031' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
capabilities: fix potential memleak on error path from vfs_getxattr_alloc()
There are two capabilities related to ring-based dirty page tracking:
KVM_CAP_DIRTY_LOG_RING and KVM_CAP_DIRTY_LOG_RING_ACQ_REL. Both are
supported by x86. However, arm64 supports KVM_CAP_DIRTY_LOG_RING_ACQ_REL
only when the feature is supported on arm64. The userspace doesn't have
to enable the advertised capability, meaning KVM_CAP_DIRTY_LOG_RING can
be enabled on arm64 by userspace and it's wrong.
Fix it by double checking if the capability has been advertised prior to
enabling it. It's rejected to enable the capability if it hasn't been
advertised.
Fixes: 17601bfed9 ("KVM: Add KVM_CAP_DIRTY_LOG_RING_ACQ_REL capability and config option")
Reported-by: Sean Christopherson <seanjc@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221031003621.164306-4-gshan@redhat.com
Starting with 6.1-rc1, CONFIG_FORTIFY_SOURCE checks became smart enough
to detect memcpy() callers that copy beyond what seems to be the end of
a struct. Unfortunately, gcc has a bug wherein it cannot reliably
compute the size of a struct containing another struct containing a flex
array at the end. This is the case with the xfs log item format
structures, which means that -rc1 starts complaining all over the place.
Fix these problems by memcpying the struct head and the flex arrays
separately. Although it's tempting to use the FLEX_ARRAY macros, the
structs involved are part of the ondisk log format. Some day we're
going to want to make the ondisk log contents endian-safe, which means
that we will have to stop using memcpy entirely.
While we're at it, fix some deficiencies in the validation of recovered
log intent items -- if the size of the recovery buffer is not even large
enough to cover the flex array record count in the head, we should abort
the recovery of that item immediately.
The last patch of this series changes the EFI/EFD sizeof functions names
and behaviors to be consistent with the similarly named sizeof helpers
for other log intent items.
v2: fix more inadequate log intent done recovery validation and dump
corrupt recovered items
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----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=wP07
-----END PGP SIGNATURE-----
Merge tag 'fix-log-recovery-misuse-6.1_2022-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.1-fixes
xfs: fix various problems with log intent item recovery
Starting with 6.1-rc1, CONFIG_FORTIFY_SOURCE checks became smart enough
to detect memcpy() callers that copy beyond what seems to be the end of
a struct. Unfortunately, gcc has a bug wherein it cannot reliably
compute the size of a struct containing another struct containing a flex
array at the end. This is the case with the xfs log item format
structures, which means that -rc1 starts complaining all over the place.
Fix these problems by memcpying the struct head and the flex arrays
separately. Although it's tempting to use the FLEX_ARRAY macros, the
structs involved are part of the ondisk log format. Some day we're
going to want to make the ondisk log contents endian-safe, which means
that we will have to stop using memcpy entirely.
While we're at it, fix some deficiencies in the validation of recovered
log intent items -- if the size of the recovery buffer is not even large
enough to cover the flex array record count in the head, we should abort
the recovery of that item immediately.
The last patch of this series changes the EFI/EFD sizeof functions names
and behaviors to be consistent with the similarly named sizeof helpers
for other log intent items.
v2: fix more inadequate log intent done recovery validation and dump
corrupt recovered items
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
* tag 'fix-log-recovery-misuse-6.1_2022-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: dump corrupt recovered log intent items to dmesg consistently
xfs: actually abort log recovery on corrupt intent-done log items
xfs: refactor all the EFI/EFD log item sizeof logic
xfs: fix memcpy fortify errors in EFI log format copying
xfs: fix memcpy fortify errors in RUI log format copying
xfs: fix memcpy fortify errors in CUI log format copying
xfs: fix memcpy fortify errors in BUI log format copying
xfs: fix validation in attr log item recovery
We've been (ab)using XFS_REFC_COW_START as both an integer quantity and
a bit flag, even though it's *only* a bit flag. Rename the variable to
reflect its nature and update the cast target since we're not supposed
to be comparing it to xfs_agblock_t now.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
We're supposed to initialize the list head of an object before adding it
to another list. Fix that, and stop using the kmem_{alloc,free} calls
from the Irix days.
Fixes: 174edb0e46 ("xfs: store in-progress CoW allocations in the refcount btree")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
As we've seen, refcount records use the upper bit of the rc_startblock
field to ensure that all the refcount records are at the right side of
the refcount btree. This works because an AG is never allowed to have
more than (1U << 31) blocks in it. If we ever encounter a filesystem
claiming to have that many blocks, we absolutely do not want reflink
touching it at all.
However, this test at the start of xfs_refcount_recover_cow_leftovers is
slightly incorrect -- it /should/ be checking that agblocks isn't larger
than the XFS_MAX_CRC_AG_BLOCKS constant, and it should check that the
constant is never large enough to conflict with that CoW flag.
Note that the V5 superblock verifier has not historically rejected
filesystems where agblocks >= XFS_MAX_CRC_AG_BLOCKS, which is why this
ended up in the COW recovery routine.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Now that we've separated the startblock and CoW/shared extent domain in
the incore refcount record structure, check the domain whenever we
retrieve a record to ensure that it's still in the domain that we want.
Depending on the circumstances, a change in domain either means we're
done processing or that we've found a corruption and need to fail out.
The refcount check in xchk_xref_is_cow_staging is redundant since
_get_rec has done that for a long time now, so we can get rid of it.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Now that we have an explicit enum for shared and CoW staging extents, we
can get rid of the old FIND_RCEXT flags. Omit a couple of conversions
that disappear in the next patches.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Create a helper function to ensure that CoW staging extent records have
a single refcount and that shared extent records have more than 1
refcount. We'll put this to more use in the next patch.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Now that we've broken out the startblock and shared/cow domain in the
incore refcount extent record structure, update the tracepoints to
report the domain.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Just prior to committing the reflink code into upstream, the xfs
maintainer at the time requested that I find a way to shard the refcount
records into two domains -- one for records tracking shared extents, and
a second for tracking CoW staging extents. The idea here was to
minimize mount time CoW reclamation by pushing all the CoW records to
the right edge of the keyspace, and it was accomplished by setting the
upper bit in rc_startblock. We don't allow AGs to have more than 2^31
blocks, so the bit was free.
Unfortunately, this was a very late addition to the codebase, so most of
the refcount record processing code still treats rc_startblock as a u32
and pays no attention to whether or not the upper bit (the cow flag) is
set. This is a weakness is theoretically exploitable, since we're not
fully validating the incoming metadata records.
Fuzzing demonstrates practical exploits of this weakness. If the cow
flag of a node block key record is corrupted, a lookup operation can go
to the wrong record block and start returning records from the wrong
cow/shared domain. This causes the math to go all wrong (since cow
domain is still implicit in the upper bit of rc_startblock) and we can
crash the kernel by tricking xfs into jumping into a nonexistent AG and
tripping over xfs_perag_get(mp, <nonexistent AG>) returning NULL.
To fix this, start tracking the domain as an explicit part of struct
xfs_refcount_irec, adjust all refcount functions to check the domain
of a returned record, and alter the function definitions to accept them
where necessary.
Found by fuzzing keys[2].cowflag = add in xfs/464.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Consolidate the open-coded xfs_refcount_irec fields into an actual
struct and use the existing _btrec_to_irec to decode the ondisk record.
This will reduce code churn in the next patch.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
If log recovery decides that an intent item is corrupt and wants to
abort the mount, capture a hexdump of the corrupt log item in the kernel
log for further analysis. Some of the log item code already did this,
so we're fixing the rest to do it consistently.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Structure definitions for incore objects do not belong in the ondisk
format header. Move them to the incore types header where they belong.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
If log recovery picks up intent-done log items that are not of the
correct size it needs to abort recovery and fail the mount. Debug
assertions are not good enough.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
If we're in the middle of a deferred refcount operation and decide to
roll the transaction to avoid overflowing the transaction space, we need
to check the new agbno/aglen parameters that we're about to record in
the new intent. Specifically, we need to check that the new extent is
completely within the filesystem, and that continuation does not put us
into a different AG.
If the keys of a node block are wrong, the lookup to resume an
xfs_refcount_adjust_extents operation can put us into the wrong record
block. If this happens, we might not find that we run out of aglen at
an exact record boundary, which will cause the loop control to do the
wrong thing.
The previous patch should take care of that problem, but let's add this
extra sanity check to stop corruption problems sooner than later.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Refactor all the open-coded sizeof logic for EFI/EFD log item and log
format structures into common helper functions whose names reflect the
struct names.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Create a predicate function to verify that a given agbno/blockcount pair
fit entirely within a single allocation group and don't suffer
mathematical overflows. Refactor the existng open-coded logic; we're
going to add more calls to this function in the next patch.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
