Right now ntfs3 uses posix_acl_equiv_mode instead of
posix_acl_update_mode like all other fs.
Reviewed-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
In case of removing of xattr there must be XATTR_REPLACE flag and
zero length. We already check XATTR_REPLACE in ntfs_set_ea, so
now we pass XATTR_REPLACE to ntfs_set_ea.
Reviewed-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
We can safely move set_cached_acl because it works with NULL acl too.
Reviewed-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Now ntfs3 locks mutex for smaller time.
Theoretically in successful cases those locks aren't needed at all.
But proving the same for error cases is difficult.
So instead of removing them we just move them.
Reviewed-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
We need to always call indx_delete_entry after indx_insert_entry
if error occurred.
Reviewed-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Some discussion has been spoken that this deprecated mount options
should be removed before 5.15 lands. This driver is not never seen day
light so it was decided that nls mount option has to be removed. We have
always possibility to add this if needed.
One possible need is example if current ntfs driver will be taken out of
kernel and ntfs3 needs to support mount options what it has.
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
There is already a 'u8 mask' defined at the top of the function.
There is no need to define a new one here.
Remove the useless and shadowing new 'mask' variable.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
'fnd' has been dereferenced several time before, so testing it here is
pointless.
Moreover, all callers of 'indx_find()' already have some error handling
code that makes sure that no NULL 'fnd' is passed.
So, remove the useless test.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
This allows to wait only when it's requested.
It speeds up creation of hardlinks.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
xfstest generic/041 works with 3003 hardlinks.
Because of this we raise hardlinks limit to 4000.
There are no drawbacks or regressions.
Theoretically we can raise all the way up to ffff,
but there is no practical use for this.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Do not try to insert attribute if there is no room in record.
Reviewed-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Currently a failed allocation on sbi->upcase will cause an exit via
the label free_sbi causing a memory leak on object opts. Fix this by
re-ordering the exit paths free_opts and free_sbi so that kfree's occur
in the reverse allocation order.
Addresses-Coverity: ("Resource leak")
Fixes: 27fac77707 ("fs/ntfs3: Init spi more in init_fs_context than fill_super")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Right now sb blocksize first get initiliazed in fill_super but in can be
changed in helper function. It makes more sense to that this happened
only in one place.
Because we move this to helper function it makes more sense that
s_maxbytes will also be there. I rather have every sb releted thing in
fill_super, but because there is already sb releted stuff in this
helper. This will have to do for now.
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Initializing should be as close as possible when we use it so that
we do not need to scroll up to see what is happening.
Also bdev_get_queue() can never return NULL so we do not need to check
for !rq.
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
We can survive without this tmp point upcase. So remove it we don't have
so many tmp pointer in this function.
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Drop tmp pointer bd_inode because this is only used ones in fill_super.
Also we have so many initializing happening at the beginning that it is
already way too much to follow.
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
We only use this in two places so we do not really need it. Also
wrapper sb_rdonly() is pretty self explanatory. This will make little
bit easier to read this super long variable list in the beginning of
ntfs_fill_super().
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Use sb instead of sbi->sb in fill_super. We have sb so why not use
it. Also makes code more readable.
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Remove some unnecessary variable loading. These look like copy paste
work and they are not used to anything.
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
In many places it is not needed to use goto out. We can just return
right away. This will make code little bit more cleaner as we won't
need to check error path.
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Remove root drop when we fault out. This can never happened because
when we allocate root we eather fault when no root or success.
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Change EINVAL to ENOMEM when d_make_root fails because that is right
errno.
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
We can make code little bit more readable by using min/max macros.
These were found with Coccinelle.
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
We can make code little more readable by using kernel macros clamp/max.
This were found with kernel included Coccinelle minmax script.
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
We do not need this check as this is same thing as
NTFS_MIN_MFT_ZONE > zlen. We already check NTFS_MIN_MFT_ZONE <= zlen and
exit because is too big request. Remove it so code is cleaner.
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
If ntfs_refresh_zone() returns error it will be changed to -ENOSPC. It
is not right. Also caller of this functions also check other errors.
Fixes: 78ab59fee0 ("fs/ntfs3: Rework file operations")
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Remove tabs before spaces from comment as recommended by kernel coding
style. Checkpatch also warn about these.
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Remove braces from single statment block as they are not needed. Also
Linux kernel coding style guide recommend this and checkpatch warn about
this.
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
For better code readability place constant always right side of the
test. This will also address checkpatch warning.
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
No need for plus sign here. So remove it. Checkpatch will also be happy.
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
We do not have any reason to keep old linear search in. Before this was
used for error path or if table was so big that it cannot be allocated.
Current binary search implementation won't need error path. Remove old
references to linear entry search.
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
We could try to optimize algorithm to first fill just small table and
after that use bigger table all the way up to ARRAY_SIZE(offs). This
way we can use bigger search array, but not lose benefits with entry
count smaller < ARRAY_SIZE(offs).
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Current binary search allocates memory for table and fill whole table
before we start actual binary search. This is quite inefficient because
table fill will always be O(n). Also if table is huge we need to
reallocate memory which is costly.
This implementation use just stack memory and always when table is full
we will check if last element is <= and if not start table fill again.
The idea was that it would be same cost as table reallocation.
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
We have lot of unnecessary headers in these files. Remove them so that
we help compiler a little bit.
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
There is lot of headers which we do not need in this file. Delete them
and add what we really need. Here is list which identify why we need
this header.
<linux/kernel.h> // min()
<linux/slab.h> // kzalloc()
<linux/stddef.h> // offsetof()
<linux/string.h> // memcpy(), memset()
<linux/types.h> // u8, size_t, etc.
"debug.h" // PtrOffset()
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
There is no headers. They will be included through ntfs_fs.c, but that
is not right thing to do. Let's include headers what this file need
straight away.
types.h is needed for __le16, u8 etc.
kernel.h is needed for le16_to_cpu()
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
We only need linux/types.h for types like u8 etc. So we can remove rest
and help compiler a little bit.
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
size_t needs header. Add missing header guards so that compiler will
only include these ones.
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
We do not have headers at all in this file. We should have them so that
not every .c file needs to include all of the stuff which this file need
for building. This way we can remove some headers from other files and
get better picture what is needed. This can save some compilation time.
And this can help if we sometimes want to separate this one big header.
Also use forward declarations for structs and enums when it not included
straight with include and it is used in function declarations input.
This will prevent possible compiler warning:
xxx declared inside parameter list will not be visible
outside of this definition or declaration
Here is list which I made when parsing this. There is not necessarily
all example from this header file, but this just proofs we need it.
<linux/blkdev.h> SECTOR_SHIFT
<linux/buffer_head.h> sb_bread(), put_bh
<linux/cleancache.h> put_page()
<linux/fs.h> struct inode (Just struct ntfs_inode need it)
<linux/highmem.h> kunmap(), kmap()
<linux/kernel.h> cpu_to_leXX() ALIGN
<linux/mm.h> kvfree()
<linux/mutex.h> struct mutex, mutex_(un/try)lock()
<linux/page-flags.h> PageError()
<linux/pagemap.h> read_mapping_page()
<linux/rbtree.h> struct rb_root
<linux/rwsem.h> struct rw_semaphore
<linux/slab.h> krfree(), kzalloc()
<linux/string.h> memset()
<linux/time64.h> struct timespec64
<linux/types.h> uXX, __leXX
<linux/uidgid.h> kuid_t, kgid_t
<asm/div64.h> do_div()
<asm/page.h> PAGE_SIZE
"debug.h" ntfs_err() (Just one entry. Maybe we can drop this)
"ntfs.h" Do you even ask?
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
We do not have header files at all in this file. Add following headers
and there is also explanation which for it was added. Note that
explanation might not be complete, but it just proofs it is needed.
<linux/blkdev.h> // SECTOR_SHIFT
<linux/build_bug.h> // static_assert()
<linux/kernel.h> // cpu_to_le64, cpu_to_le32, ALIGN
<linux/stddef.h> // offsetof()
<linux/string.h> // memcmp()
<linux/types.h> //__le32, __le16
"debug.h" // PtrOffset(), Add2Ptr()
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Add forward declarations for structs so that we can include this file
without warnings even without linux/fs.h
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
The variable err is being initialized with a value that is never read, it
is being updated later on. The assignment is redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Show options should show option according documentation when some value
is not default or when ever coder wants. Uid/gid are problematic because
it is hard to know which are defaults. In file system there is many
different implementation for this problem.
Some file systems show uid/gid when they are different than root, some
when user has set them and some show them always. There is also problem
that what if root uid/gid change. This code just choose to show them
always. This way we do not need to think this any more.
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Rename mount option no_acs_rules to (no)acsrules. This allow us to use
possibility to mount with options noaclrules or aclrules.
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Other fs drivers are using iocharset= mount option for specifying charset.
So add it also for ntfs3 and mark old nls= mount option as deprecated.
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
If we call Opt_nohidden with just keyword hidden, then we can use
hidden/nohidden when mounting. We already use this method for almoust
all other parameters so it is just logical that this will use same
method.
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
init_fs_context() is meant to initialize s_fs_info (spi). Move spi
initializing code there which we can initialize before fill_super().
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
We have now new mount api as described in Documentation/filesystems. We
should use it as it gives us some benefits which are desribed here
lore.kernel.org/linux-fsdevel/159646178122.1784947.11705396571718464082.stgit@warthog.procyon.org.uk/
Nls loading is changed a to load with string. This did make code also
little cleaner.
Also try to use fsparam_flag_no as much as possible. This is just nice
little touch and is not mandatory but it should not make any harm. It
is just convenient that we can use example acl/noacl mount options.
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Use pointer to mount options. We want to do this because we will use new
mount api which will benefit that we have spi and mount options in
different allocations. When we remount we do not have to make whole new
spi it is enough that we will allocate just mount options.
Please note that we can do example remount lot cleaner but things will
change in next patch so this should be just functional.
Signed-off-by: Kari Argillander <kari.argillander@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
