The parent image is read only up to the overlap point, the rest of
the buffer should be zeroed. This snuck in because as it turns out
the overlap test case has not been triggering this code path for
a while now.
Fixes: a9b67e6994 ("rbd: replace obj_req->tried_parent with obj_req->read_state")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
- support for rbd object-map and fast-diff features (myself). This
will speed up reads, discards and things like snap diffs on sparse
images.
- ceph.snap.btime vxattr to expose snapshot creation time (David
Disseldorp). This will be used to integrate with "Restore Previous
Versions" feature added in Windows 7 for folks who reexport ceph
through SMB.
- security xattrs for ceph (Zheng Yan). Only selinux is supported
for now due to the limitations of ->dentry_init_security().
- support for MSG_ADDR2, FS_BTIME and FS_CHANGE_ATTR features (Jeff
Layton). This is actually a single feature bit which was missing
because of the filesystem pieces. With this in, the kernel client
will finally be reported as "luminous" by "ceph features" -- it is
still being reported as "jewel" even though all required Luminous
features were implemented in 4.13.
- stop NULL-terminating ceph vxattrs (Jeff Layton). The convention
with xattrs is to not terminate and this was causing inconsistencies
with ceph-fuse.
- change filesystem time granularity from 1 us to 1 ns, again fixing
an inconsistency with ceph-fuse (Luis Henriques).
On top of this there are some additional dentry name handling and cap
flushing fixes from Zheng. Finally, Jeff is formally taking over for
Zheng as the filesystem maintainer.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAl0u+X8THGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi9byB/9fIxzoxtDMvixtJabuGSJRtlijDlWF
GlO6yIWCXl/8v8easR2PCF75U/xv0+QFQmze8PVi8u4Xz589P247NnEuyEZ9n84i
aCavARho6QLZPEL+B04NaqoHBl+ORKQTA6eKGhyKwRp/rn83z5Ubuw2tN7krHT3b
kCY61FuTQGxNY2o/WKv/iLwINYr7H23hCf0WwyyKH1bp7OegiQ14Ebn1NtfS3sMx
hS6h8Ya826vmUW0bCSS/9kzKYBCjksTig0HphUOHq6BoZJs++0b7GukIulRyuLfD
J9Gr9HGPoDCVzdmFfpn2FSlxdmqfO9amUSagd0ftLQfFlPlrpoULi0GW
=Bgxr
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.3-rc1' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"Lots of exciting things this time!
- support for rbd object-map and fast-diff features (myself). This
will speed up reads, discards and things like snap diffs on sparse
images.
- ceph.snap.btime vxattr to expose snapshot creation time (David
Disseldorp). This will be used to integrate with "Restore Previous
Versions" feature added in Windows 7 for folks who reexport ceph
through SMB.
- security xattrs for ceph (Zheng Yan). Only selinux is supported for
now due to the limitations of ->dentry_init_security().
- support for MSG_ADDR2, FS_BTIME and FS_CHANGE_ATTR features (Jeff
Layton). This is actually a single feature bit which was missing
because of the filesystem pieces. With this in, the kernel client
will finally be reported as "luminous" by "ceph features" -- it is
still being reported as "jewel" even though all required Luminous
features were implemented in 4.13.
- stop NULL-terminating ceph vxattrs (Jeff Layton). The convention
with xattrs is to not terminate and this was causing
inconsistencies with ceph-fuse.
- change filesystem time granularity from 1 us to 1 ns, again fixing
an inconsistency with ceph-fuse (Luis Henriques).
On top of this there are some additional dentry name handling and cap
flushing fixes from Zheng. Finally, Jeff is formally taking over for
Zheng as the filesystem maintainer"
* tag 'ceph-for-5.3-rc1' of git://github.com/ceph/ceph-client: (71 commits)
ceph: fix end offset in truncate_inode_pages_range call
ceph: use generic_delete_inode() for ->drop_inode
ceph: use ceph_evict_inode to cleanup inode's resource
ceph: initialize superblock s_time_gran to 1
MAINTAINERS: take over for Zheng as CephFS kernel client maintainer
rbd: setallochint only if object doesn't exist
rbd: support for object-map and fast-diff
rbd: call rbd_dev_mapping_set() from rbd_dev_image_probe()
libceph: export osd_req_op_data() macro
libceph: change ceph_osdc_call() to take page vector for response
libceph: bump CEPH_MSG_MAX_DATA_LEN (again)
rbd: new exclusive lock wait/wake code
rbd: quiescing lock should wait for image requests
rbd: lock should be quiesced on reacquire
rbd: introduce copyup state machine
rbd: rename rbd_obj_setup_*() to rbd_obj_init_*()
rbd: move OSD request allocation into object request state machines
rbd: factor out __rbd_osd_setup_discard_ops()
rbd: factor out rbd_osd_setup_copyup()
rbd: introduce obj_req->osd_reqs list
...
setallochint is really only useful on object creation. Continue
hinting unconditionally if object map cannot be used.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Speed up reads, discards and zeroouts through RBD_OBJ_FLAG_MAY_EXIST
and RBD_OBJ_FLAG_NOOP_FOR_NONEXISTENT based on object map.
Invalid object maps are not trusted, but still updated. Note that we
never iterate, resize or invalidate object maps. If object-map feature
is enabled but object map fails to load, we just fail the requester
(either "rbd map" or I/O, by way of post-acquire action).
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Snapshot object map will be loaded in rbd_dev_image_probe(), so we need
to know snapshot's size (as opposed to HEAD's size) sooner.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
This will be used for loading object map. rbd_obj_read_sync() isn't
suitable because object map must be accessed through class methods.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
rbd_wait_state_locked() is built around rbd_dev->lock_waitq and blocks
rbd worker threads while waiting for the lock, potentially impacting
other rbd devices. There is no good way to pass an error code into
image request state machines when acquisition fails, hence the use of
RBD_DEV_FLAG_BLACKLISTED for everything and various other issues.
Introduce rbd_dev->acquiring_list and move acquisition into image
request state machine. Use rbd_img_schedule() for kicking and passing
error codes. No blocking occurs while waiting for the lock, but
rbd_dev->lock_rwsem is still held across lock, unlock and set_cookie
calls.
Always acquire the lock on "rbd map" to avoid associating the latency
of acquiring the lock with the first I/O request.
A slight regression is that lock_timeout is now respected only if lock
acquisition is triggered by "rbd map" and not by I/O. This is somewhat
compensated by the fact that we no longer block if the peer refuses to
release lock -- I/O is failed with EROFS right away.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Syncing OSD requests doesn't really work. A single image request may
be comprised of multiple object requests, each of which can go through
a series of OSD requests (original, copyups, etc). On top of that, the
OSD cliest may be shared with other rbd devices.
What we want is to ensure that all in-flight image requests complete.
Introduce rbd_dev->running_list and block in RBD_LOCK_STATE_RELEASING
until that happens. New OSD requests may be started during this time.
Note that __rbd_img_handle_request() acquires rbd_dev->lock_rwsem only
if need_exclusive_lock() returns true. This avoids a deadlock similar
to the one outlined in the previous commit between unlock and I/O that
doesn't require lock, such as a read with object-map feature disabled.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Quiesce exclusive lock at the top of rbd_reacquire_lock() instead
of only when ceph_cls_set_cookie() fails. This avoids a deadlock on
rbd_dev->lock_rwsem.
If rbd_dev->lock_rwsem is needed for I/O completion, set_cookie can
hang ceph-msgr worker thread if set_cookie reply ends up behind an I/O
reply, because, like lock and unlock requests, set_cookie is sent and
waited upon with rbd_dev->lock_rwsem held for write.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Both write and copyup paths will get more complex with object map.
Factor copyup code out into a separate state machine.
While at it, take advantage of obj_req->osd_reqs list and issue empty
and current snapc OSD requests together, one after another.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
These functions don't allocate and set up OSD requests anymore.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Following submission, move initial OSD request allocation into object
request state machines. Everything that has to do with OSD requests is
now handled inside the state machine, all __rbd_img_fill_request() has
left is initialization.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
With obj_req->xferred removed, obj_req->ex.oe_off and obj_req->ex.oe_len
can be updated if required for alignment. Previously the new offset and
length weren't stored anywhere beyond rbd_obj_setup_discard().
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Since the dawn of time it had been assumed that a single object request
spawns a single OSD request. This is already impacting copyup: instead
of sending empty and current snapc copyups together, we wait for empty
snapc OSD request to complete in order to reassign obj_req->osd_req
with current snapc OSD request. Looking further, updating potentially
hundreds of snapshot object maps serially is a non-starter.
Replace obj_req->osd_req pointer with obj_req->osd_reqs list. Use
osd_req->r_private_item for linkage.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Make it possible to schedule image requests on a workqueue. This fixes
parent chain recursion added in the previous commit and lays the ground
for exclusive lock wait/wake improvements.
The "wait for pending subrequests and report first nonzero result" code
is generalized to be used by object request state machine.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Start eliminating asymmetry where the initial OSD request is allocated
and submitted from outside the state machine, making error handling and
restarts harder than they could be. This commit deals with submission,
a commit that deals with allocation will follow.
Note that this commit adds parent chain recursion on the submission
side:
rbd_img_request_submit
rbd_obj_handle_request
__rbd_obj_handle_request
rbd_obj_handle_read
rbd_obj_handle_write_guard
rbd_obj_read_from_parent
rbd_img_request_submit
This will be fixed in the next commit.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
In preparation for moving OSD request allocation and submission into
object request state machines, get rid of RBD_OBJ_WRITE_{FLAT,GUARD}.
We would need to start in a new state, whether the request is guarded
or not. Unify them into RBD_OBJ_WRITE_OBJECT and pass guard info
through obj_req->flags.
While at it, make our ENOENT handling a little more precise: only hide
ENOENT when it is actually expected, that is on delete.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Make rbd_obj_handle_read() look like a state machine and get rid of
the necessity to patch result in rbd_obj_handle_request(), completing
the removal of obj_req->xferred and img_req->xferred.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
obj_req->xferred and img_req->xferred don't bring any value. The
former is used for short reads and has to be set to obj_req->ex.oe_len
after that and elsewhere. The latter is just an aggregate.
Use result for short reads (>=0 - number of bytes read, <0 - error) and
pass it around explicitly. No need to store it in obj_req.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
The check added in commit 721c7fc701 ("block: fail op_is_write()
requests to read-only partitions") was lifted in commit a32e236eb9
("Partially revert "block: fail op_is_write() requests to read-only
partitions""). Basic things like user triggered writes and discards
are still caught, but internal kernel users can submit anything. In
particular, ext4 will attempt to write to the superblock if it detects
errors in the filesystem, even if the filesystem is mounted read-only
on a read-only partition.
The assert is overkill regardless.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
rbd_assert(0) has caused different issues depending on
the compiler version in the past, so it seems better to avoid it
completely.
Replace the remaining instances.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
clang fails to see that rbd_assert(0) ends in an unreachable code
path and warns about a subsequent use of an uninitialized variable
when CONFIG_PROFILE_ANNOTATED_BRANCHES is set:
drivers/block/rbd.c:2402:4: error: variable 'ret' is used uninitialized whenever 'if' condition is false
[-Werror,-Wsometimes-uninitialized]
rbd_assert(0);
^~~~~~~~~~~~~
drivers/block/rbd.c:563:7: note: expanded from macro 'rbd_assert'
if (unlikely(!(expr))) { \
^~~~~~~~~~~~~~~~~
include/linux/compiler.h:48:23: note: expanded from macro 'unlikely'
# define unlikely(x) (__branch_check__(x, 0, __builtin_constant_p(x)))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/block/rbd.c:2410:6: note: uninitialized use occurs here
if (ret) {
^~~
drivers/block/rbd.c:2402:4: note: remove the 'if' if its condition is always true
rbd_assert(0);
^
drivers/block/rbd.c:563:3: note: expanded from macro 'rbd_assert'
if (unlikely(!(expr))) { \
^
drivers/block/rbd.c:2376:9: note: initialize the variable 'ret' to silence this warning
int ret;
^
= 0
1 error generated.
This seems to be a bug in clang, but is easy to work around by using
an unconditional BUG().
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Now that we have alloc_size that controls our discard behavior, it
doesn't make sense to have these set to object (set) size. alloc_size
defaults to 64k, but because discard_granularity is likely 4M, only
ranges that are equal to or bigger than 4M can be considered during
fstrim. A smaller io_min is also more likely to be met, resulting in
fewer deferred writes on bluestore OSDs.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
- rbd will now ignore discards that aren't aligned and big enough to
actually free up some space (myself). This is controlled by the new
alloc_size map option and can be disabled if needed.
- support for rbd deep-flatten feature (myself). Deep-flatten allows
"rbd flatten" to fully disconnect the clone image and its snapshots
from the parent and make the parent snapshot removable.
- a new round of cap handling improvements (Zheng Yan). The kernel
client should now be much more prompt about releasing its caps and
it is possible to put a limit on the number of caps held.
- support for getting ceph.dir.pin extended attribute (Zheng Yan)
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAlyH5LUTHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi9cCCACb8PiX+PZWuwboAmO66TIQGT8VgEer
/K3zU6UsmnKHldk/gyjK+ESIxX64zP9HrNGTDxlDKZTB52GDiAYbhcBnskMtrtgl
EFLweTRs6XiHI1yV3qmElyPz0eLnWBXLUW6RDoyHxGUPWuGk9Mp4Of+PSkl2aO/9
j4eBQj7FYB6XAuzwFKltFq3uKb+jODDrW7VRDDTMEYGPHZOU6EXXUEUOrAtAreiU
j9wHF2AZ61WdVjzzXF/tBHJIwGGZj8102Af4ra/UMuHmtGZag6n0eY6uzGXluY2o
uGPuhFHMExsqjhCCPHtayWJW7WG0pQKKuwT8Ucw/KPBJ6Ok3Z2tG27/8
=sQNQ
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.1-rc1' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"The highlights are:
- rbd will now ignore discards that aren't aligned and big enough to
actually free up some space (myself). This is controlled by the new
alloc_size map option and can be disabled if needed.
- support for rbd deep-flatten feature (myself). Deep-flatten allows
"rbd flatten" to fully disconnect the clone image and its snapshots
from the parent and make the parent snapshot removable.
- a new round of cap handling improvements (Zheng Yan). The kernel
client should now be much more prompt about releasing its caps and
it is possible to put a limit on the number of caps held.
- support for getting ceph.dir.pin extended attribute (Zheng Yan)"
* tag 'ceph-for-5.1-rc1' of git://github.com/ceph/ceph-client: (26 commits)
Documentation: modern versions of ceph are not backed by btrfs
rbd: advertise support for RBD_FEATURE_DEEP_FLATTEN
rbd: whole-object write and zeroout should copyup when snapshots exist
rbd: copyup with an empty snapshot context (aka deep-copyup)
rbd: introduce rbd_obj_issue_copyup_ops()
rbd: stop copying num_osd_ops in rbd_obj_issue_copyup()
rbd: factor out __rbd_osd_req_create()
rbd: clear ->xferred on error from rbd_obj_issue_copyup()
rbd: remove experimental designation from kernel layering
ceph: add mount option to limit caps count
ceph: periodically trim stale dentries
ceph: delete stale dentry when last reference is dropped
ceph: remove dentry_lru file from debugfs
ceph: touch existing cap when handling reply
ceph: pass inclusive lend parameter to filemap_write_and_wait_range()
rbd: round off and ignore discards that are too small
rbd: handle DISCARD and WRITE_ZEROES separately
rbd: get rid of obj_req->obj_request_count
libceph: use struct_size() for kmalloc() in crush_decode()
ceph: send cap releases more aggressively
...
-----BEGIN PGP SIGNATURE-----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=VBaU
-----END PGP SIGNATURE-----
Merge tag 'for-5.1/block-20190302' of git://git.kernel.dk/linux-block
Pull block layer updates from Jens Axboe:
"Not a huge amount of changes in this round, the biggest one is that we
finally have Mings multi-page bvec support merged. Apart from that,
this pull request contains:
- Small series that avoids quiescing the queue for sysfs changes that
match what we currently have (Aleksei)
- Series of bcache fixes (via Coly)
- Series of lightnvm fixes (via Mathias)
- NVMe pull request from Christoph. Nothing major, just SPDX/license
cleanups, RR mp policy (Hannes), and little fixes (Bart,
Chaitanya).
- BFQ series (Paolo)
- Save blk-mq cpu -> hw queue mapping, removing a pointer indirection
for the fast path (Jianchao)
- fops->iopoll() added for async IO polling, this is a feature that
the upcoming io_uring interface will use (Christoph, me)
- Partition scan loop fixes (Dongli)
- mtip32xx conversion from managed resource API (Christoph)
- cdrom registration race fix (Guenter)
- MD pull from Song, two minor fixes.
- Various documentation fixes (Marcos)
- Multi-page bvec feature. This brings a lot of nice improvements
with it, like more efficient splitting, larger IOs can be supported
without growing the bvec table size, and so on. (Ming)
- Various little fixes to core and drivers"
* tag 'for-5.1/block-20190302' of git://git.kernel.dk/linux-block: (117 commits)
block: fix updating bio's front segment size
block: Replace function name in string with __func__
nbd: propagate genlmsg_reply return code
floppy: remove set but not used variable 'q'
null_blk: fix checking for REQ_FUA
block: fix NULL pointer dereference in register_disk
fs: fix guard_bio_eod to check for real EOD errors
blk-mq: use HCTX_TYPE_DEFAULT but not 0 to index blk_mq_tag_set->map
block: optimize bvec iteration in bvec_iter_advance
block: introduce mp_bvec_for_each_page() for iterating over page
block: optimize blk_bio_segment_split for single-page bvec
block: optimize __blk_segment_map_sg() for single-page bvec
block: introduce bvec_nth_page()
iomap: wire up the iopoll method
block: add bio_set_polled() helper
block: wire up block device iopoll method
fs: add an iopoll method to struct file_operations
loop: set GENHD_FL_NO_PART_SCAN after blkdev_reread_part()
loop: do not print warn message if partition scan is successful
block: bounce: make sure that bvec table is updated
...
All copyups perform deep-copyup regardless of whether deep-flatten
feature is enabled. The feature bit is used to ensure that image is
written to only by new-enough clients that always perform deep-copyup.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Otherwise, once the parent snapshot is removed, the clone's snapshot
wouldn't reflect the state of the clone prior to whole-object write or
zeroout because a deep-copyup was never done ("rbd flatten" wouldn't do
it because the modified object would exist in HEAD).
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
This is the core of deep-flatten feature: sending a copyup request
(i.e. a guarded write of the data read from the parent) with an empty
snapshot context (snaps = [], seq = 0) causes the OSD to reflect the
write in all existing snapshots. This allows "rbd flatten" to fully
disconnect the clone image and its snapshots from the parent and make
the parent snapshot removable.
The actual modification request is sent only after deep-copyup request
is completed. Waiting for deep-copyup reply is unnecessary, this will
be improved in the future.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
In preparation for deep-flatten feature, split rbd_obj_issue_copyup()
into two functions and add a new write state to make the state machine
slightly more clear. Make the copyup op optional and start using that
for when the overlap goes to 0.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
In preparation for deep-flatten feature, stop copying num_osd_ops from
the original request in rbd_obj_issue_copyup(). Split the calculation
into count_{write,zeroout}_ops() respectively and determine whether the
assert_exists guard is needed with the new rbd_obj_copyup_enabled().
As a nice side effect, we no longer guard in the writefull case as the
copyup'ed object is always fully overwritten.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Otherwise the assert in rbd_obj_end_request() is triggered.
Fixes: 3da691bf43 ("rbd: new request handling code")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Support for kernel layering hasn't been considered experimental for
a few years now. All the issues that I'm aware of were shaken out in
2014 and early 2015. Moreover, most of that code was rewritten with
the addition of support for fancy striping.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
If, after rounding off, the discard request is smaller than alloc_size,
drop it on the floor in __rbd_img_fill_request().
Default alloc_size to 64k. This should cover both HDD and SSD based
bluestore OSDs and somewhat improve things for filestore. For OSDs on
filestore with filestore_punch_hole = false, alloc_size is best set to
object size in order to allow deletes and truncates and disallow zero
op.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
With discard_zeroes_data gone in commit 48920ff2a5 ("block: remove
the discard_zeroes_data flag"), continuing to provide this guarantee is
pointless: applications can't query it and discards can only be used
for deallocating.
Add OBJ_OP_ZEROOUT and move the existing logic under it. As the first
step to divorcing OBJ_OP_DISCARD, stop worrying about copyups but keep
special casing whole-object layered discards.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
QUEUE_FLAG_NO_SG_MERGE has been killed, so kill BLK_MQ_F_SG_MERGE too.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We are trying to get rid of BUS_ATTR() and the usage of that in rbd.c
can be trivially converted to use BUS_ATTR_WO and RO, so use those
macros instead.
Cc: Sage Weil <sage@redhat.com>
Cc: Alex Elder <elder@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Acked-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a window between when RBD_DEV_FLAG_REMOVING is set and when
the device is removed from rbd_dev_list. During this window, we set
"already" and return 0.
Returning 0 from write(2) can confuse userspace tools because
0 indicates that nothing was written. In particular, "rbd unmap"
will retry the write multiple times a second:
10:28:05.463299 write(4, "0", 1) = 0
10:28:05.463509 write(4, "0", 1) = 0
10:28:05.463720 write(4, "0", 1) = 0
10:28:05.463942 write(4, "0", 1) = 0
10:28:05.464155 write(4, "0", 1) = 0
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Tested-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
The current requirement is that ceph_osdc_alloc_messages() should be
called after oid and oloc are known. In preparation for preallocating
message data items, move ceph_osdc_alloc_messages() further down, so
that it is called when OSD op codes are known.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Add __init/__exit annotation to init/cleanup helpers
which are only called once in the module.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
If parent_get class method is not supported by the OSDs, fall back to
the legacy class method and assume that the parent is in the default
(i.e. "") namespace. The "use the child's image namespace" workaround
is no longer needed because creating images within namespaces will
require parent_get aware OSDs.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
In preparation for the new parent_get and parent_overlap_get class
methods, factor out the fetching and decoding of parent data.
As a side effect, we now decode all four fields in the "no parent"
case.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jason Dillaman <dillaman@redhat.com>
basic support for rbd images within namespaces (myself). Also included
y2038 conversion patches from Arnd, a pile of miscellaneous fixes from
Chengguang and Zheng's feature bit infrastructure for the filesystem.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAlt62CkTHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzizfhB/0c/rz6frunc6EcZMWuBNzlOIOktJ/m
MEbPGjCxMAsmidO1rqHHYF4iEN5hr+3AWTbtIL2m6wkqYVdg3FjmNaAYB27AdQMG
kH9bLfrKIew72/NZqXfm25yjY/86kIt8t91kay4Lchc97tSYhnFSnku7iAX2HTND
TMhq/1O/GvEyw/RmqnenJEQqFJvKnfgPPQm6W8sM2bH0T5j+EXmDT/Rv+90LogFR
J4+pZkHqDfvyMb1WJ5MkumohytbRVzRNKcMpOvjquJSqUgtgZa2JdrIsypDqSNKY
nUT6jGGlxoSbHCqRwDJoFEJOlh5A9RwKqYxNuM2a/vs9u7HpvdCK/Iah
=AtgY
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-4.19-rc1' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"The main things are support for cephx v2 authentication protocol and
basic support for rbd images within namespaces (myself).
Also included are y2038 conversion patches from Arnd, a pile of
miscellaneous fixes from Chengguang and Zheng's feature bit
infrastructure for the filesystem"
* tag 'ceph-for-4.19-rc1' of git://github.com/ceph/ceph-client: (40 commits)
ceph: don't drop message if it contains more data than expected
ceph: support cephfs' own feature bits
crush: fix using plain integer as NULL warning
libceph: remove unnecessary non NULL check for request_key
ceph: refactor error handling code in ceph_reserve_caps()
ceph: refactor ceph_unreserve_caps()
ceph: change to void return type for __do_request()
ceph: compare fsc->max_file_size and inode->i_size for max file size limit
ceph: add additional size check in ceph_setattr()
ceph: add additional offset check in ceph_write_iter()
ceph: add additional range check in ceph_fallocate()
ceph: add new field max_file_size in ceph_fs_client
libceph: weaken sizeof check in ceph_x_verify_authorizer_reply()
libceph: check authorizer reply/challenge length before reading
libceph: implement CEPHX_V2 calculation mode
libceph: add authorizer challenge
libceph: factor out encrypt_authorizer()
libceph: factor out __ceph_x_decrypt()
libceph: factor out __prepare_write_connect()
libceph: store ceph_auth_handshake pointer in ceph_connection
...
The request mtime field is used all over ceph, and is currently
represented as a 'timespec' structure in Linux. This changes it to
timespec64 to allow times beyond 2038, modifying all users at the
same time.
[ Remove now redundant ts variable in writepage_nounlock(). ]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Cloning across namespaces isn't supported yet -- for now both the
parent and the clone have to live in the same namespace, whether the
default (i.e. "") or a user-created namespace.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
