The current range handling is highly suspicious. Anyway, let the core
handle it.
The RTC has a 32 bit counter on top of days + hh:mm:ss registers.
Acked-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Use correct types for offset and time and use
rtc_time64_to_tm/rtc_tm_to_time64 to handle dates after 2106 properly.
Acked-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Switch to devm_rtc_allocate_device/rtc_register_device. This allow or
further improvement and simplifies ftrtc010_rtc_remove().
Acked-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The IRQ is requested before the struct rtc is allocated and registered, but
this struct is used in the IRQ handler. This may lead to a NULL pointer
dereference.
Switch to devm_rtc_allocate_device/rtc_register_device to allocate the rtc
before requesting the IRQ.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Now that alarms are emulated, remove the irq sysfs file that could be used
to send alarms.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Use timers to emulate alarms. Note that multiple alarms may happen if they
are set more than 15 days after the current RTC time.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Store the time as an offset to system time. As the offset is in second, it
is currently always synced with system time.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The rtc proc callback is useless for two reasosn:
- the test RTC is often not the first RTC so it will never be used
- all the info is available in the name file of the RTC sys folder
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The IRQ is requested before the struct rtc is allocated and registered, but
this struct is used in the IRQ handler.
Switch to devm_rtc_allocate_device/rtc_register_device to allocate the rtc
before requesting the IRQ.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
We should use the new method to check if RTC was powered down, which
is more solid. Since we have introduced power control and power status
registers, and we just check if the power status is the default value
(0x96), if yes that means the RTC has been powered down. Meanwhile We
can set the power control register to be one valid value to change
the power status to indicate RTC device is valid now.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
clk-gate core will take bit_idx through clk_register_gate
and then do clk_gate_ops by using BIT(bit_idx), but rtc-sun6i
is passing bit_idx as BIT(bit_idx) it becomes BIT(BIT(bit_idx)
which is wrong and eventually external gate clock is not enabling.
This patch fixed by passing bit index and the original change
introduced from below commit.
"rtc: sun6i: Add support for the external oscillator gate"
(sha1: 17ecd24641)
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Fixes: 17ecd24641 ("rtc: sun6i: Add support for the external oscillator gate")
Cc: stable@vger.kernel.org
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Fix typo introduced for RTC_DRV_JZ4740 in commit 586655d278 ("rtc:
jz4740: make the driver buildable as a module again").
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
There is no point in testing .set_mmss versus .set_mmss64 as there are both
taking the exact same argument (truncated for set_mmss though).
Also, this allows to constify struct rtc_ops.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The RTC has a 64 bit counter.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The IRQ is requested before the struct rtc is allocated and registered, but
this struct is used in the IRQ handler. This may lead to a NULL pointer
dereference.
Switch to devm_rtc_allocate_device/rtc_register_device to allocate the rtc
before requesting the IRQ.
Acked-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
This patch adds support for stm32mp1 RTC.
Some common registers with previous RTC version have a different offset.
It is the case for Control Register (CR) and ALaRMA Register (ALRMAR).
There are also new registers regarding event flags: now, Alarm event flag
is in Status Register (SR) and write 1 in Status Clear Register (SCR) is
required to clear the event.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
This patch reworks register/bits management because next version of RTC
uses the same way of working but with different register's offset or bits
moved in new registers.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
This patch cleans the following checkpatch complaints:
CHECK: 'initalized' may be misspelled - perhaps 'initialized'?
#644: FILE: drivers/rtc/rtc-stm32.c:644:
+ * the calendar has been initalized or not. INITS flag is reset by a
CHECK: Alignment should match open parenthesis
#669: FILE: drivers/rtc/rtc-stm32.c:669:
+ rtc->rtc_dev = devm_rtc_device_register(&pdev->dev, pdev->name,
+ &stm32_rtc_ops, THIS_MODULE);
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
nvmem_register() never returns NULL, so IS_ERR is good enough here.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
nvmem_register() assumes these values to be 1 if unset, so they don't
need to be set explicitly.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
This RTC is a 32-bit second counter.
This also solves an issue where mxc_rtc_set_alarm() can return with the
lock taken.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The IRQ is requested before the struct rtc is allocated and registered, but
this struct is used in the IRQ handler. This may lead to a NULL pointer
dereference.
Switch to devm_rtc_allocate_device/rtc_register_device to allocate the rtc
before requesting the IRQ.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
While the year is encoded on 32 bits in SYS_TOYWRITE1i/SYS_TOYREAD1. The
Loongson 1c datasheet states that the range is from 0 to 99.
The current code exceeds this range and seems to be working, I deduce that
the leap year algorithm will fail in 2100.
Anyway, alarm registers only encode the year on 14 bits so with alarm
support, the range will always be limited to 0 to 16383.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The error handling in ls1x_rtc_probe used to release resources but since
it is using devm functions, it only returns a value. Make the code clearer
by returning directly instead of using goto.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Let the core handle offsetting and windowing the RTC range.
The RTC has a 40-bit counter counting at 1024 Hz. So its maximum value is
2^(40-10) - 1. Also, let the core handle the offset instead of coding it in
the callbacks. Keep the default epoch at the beginning of 2009 (this will
fail in 2043).
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The probe function is not allowed to fail after the RTC is registered
because the following may happen:
CPU0: CPU1:
sys_load_module()
do_init_module()
do_one_initcall()
cmos_do_probe()
rtc_device_register()
__register_chrdev()
cdev->owner = struct module*
open("/dev/rtc0")
rtc_device_unregister()
module_put()
free_module()
module_free(mod->module_core)
/* struct module *module is now
freed */
chrdev_open()
spin_lock(cdev_lock)
cdev_get()
try_module_get()
module_is_live()
/* dereferences already
freed struct module* */
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The vr41xx RTC is a 48-bit counter counting at 32.768 kHz, giving a maximum
value of 2^(48-15)-1 seconds.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The probe function is not allowed to fail after the RTC is registered
because the following may happen:
CPU0: CPU1:
sys_load_module()
do_init_module()
do_one_initcall()
cmos_do_probe()
rtc_device_register()
__register_chrdev()
cdev->owner = struct module*
open("/dev/rtc0")
rtc_device_unregister()
module_put()
free_module()
module_free(mod->module_core)
/* struct module *module is now
freed */
chrdev_open()
spin_lock(cdev_lock)
cdev_get()
try_module_get()
module_is_live()
/* dereferences already
freed struct module* */
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
rx8581_get_datetime and rx8581_set_datetime are only used after casting dev
to an i2c_client. Remove that useless indirection.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Currently, the IRQs are disabled when the rtc driver is removed (e.g. when
shutting down the platform).
This means that the RTC will be unable to power up the platform.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The IRQ is requested before the struct rtc is allocated and registered, but
this struct is used in the IRQ handler. This may lead to a NULL pointer
dereference.
Switch to devm_rtc_allocate_device/rtc_register_device to allocate the rtc
before requesting the IRQ.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The ab-b5ze-s3 RTC is storing the year in an 8bit bcd coded register so it
can handle dates from year 2000 to year 2099.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The IRQ is requested before the struct rtc is allocated and registered, but
this struct is used in the IRQ handler. This may lead to a NULL pointer
dereference.
Also, the probe function is not allowed to fail after the RTC is registered
because the following may happen:
CPU0: CPU1:
sys_load_module()
do_init_module()
do_one_initcall()
cmos_do_probe()
rtc_device_register()
__register_chrdev()
cdev->owner = struct module*
open("/dev/rtc0")
rtc_device_unregister()
module_put()
free_module()
module_free(mod->module_core)
/* struct module *module is now
freed */
chrdev_open()
spin_lock(cdev_lock)
cdev_get()
try_module_get()
module_is_live()
/* dereferences already
freed struct module* */
Switch to devm_rtc_allocate_device/rtc_register_device to allocate the rtc
before requesting the IRQ and register the RTC as late as possible.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Now that the RTC range is properly checked, convert the driver to
rtc_tm_to_time64/rtc_time64_to_tm
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
