Commit 18b44bc5a6 ("ovl: Always reevaluate the file signature for
IMA") forced signature re-evaulation on every file access.
Instead of always re-evaluating the file's integrity, detect a change
to the backing file, by comparing the cached file metadata with the
backing file's metadata. Verifying just the i_version has not changed
is insufficient. In addition save and compare the i_ino and s_dev
as well.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Tested-by: Eric Snowberg <eric.snowberg@oracle.com>
Tested-by: Raul E Rangel <rrangel@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
trust_moklist() is specific to UEFI enabled systems. Other platforms
rely only on the Kconfig.
Define a generic wrapper named imputed_trust_enabled().
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
IMA may verify a file's integrity against a "good" value stored in the
'security.ima' xattr or as an appended signature, based on policy. When
the "good value" is stored in the xattr, the xattr may contain a file
hash or signature. In either case, the "good" value is preceded by a
header. The first byte of the xattr header indicates the type of data
- hash, signature - stored in the xattr. To support storing fs-verity
signatures in the 'security.ima' xattr requires further differentiating
the fs-verity signature from the existing IMA signature.
In addition the signatures stored in 'security.ima' xattr, need to be
disambiguated. Instead of directly signing the fs-verity digest, a new
signature format version 3 is defined as the hash of the ima_file_id
structure, which identifies the type of signature and the digest.
The IMA policy defines "which" files are to be measured, verified, and/or
audited. For those files being verified, the policy rules indicate "how"
the file should be verified. For example to require a file be signed,
the appraise policy rule must include the 'appraise_type' option.
appraise_type:= [imasig] | [imasig|modsig] | [sigv3]
where 'imasig' is the original or signature format v2 (default),
where 'modsig' is an appended signature,
where 'sigv3' is the signature format v3.
The policy rule must also indicate the type of digest, if not the IMA
default, by first specifying the digest type:
digest_type:= [verity]
The following policy rule requires fsverity signatures. The rule may be
constrained, for example based on a fsuuid or LSM label.
appraise func=BPRM_CHECK digest_type=verity appraise_type=sigv3
Acked-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Permit fsverity's file digest (a hash of struct fsverity_descriptor) to
be included in the IMA measurement list, based on the new measurement
policy rule 'digest_type=verity' option.
To differentiate between a regular IMA file hash from an fsverity's
file digest, use the new d-ngv2 format field included in the ima-ngv2
template.
The following policy rule requires fsverity file digests and specifies
the new 'ima-ngv2' template, which contains the new 'd-ngv2' field. The
policy rule may be constrained, for example based on a fsuuid or LSM
label.
measure func=FILE_CHECK digest_type=verity template=ima-ngv2
Acked-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCYji6mxQcem9oYXJAbGlu
dXguaWJtLmNvbQAKCRDLwZzRsCrn5bbvAQDB0uFJXS+FutMZSdfoXdvoV36piSyV
KNEo+sM0Ie0FTQEAtHnMZbIB2Tc5szJXaxgDbr6XbRKW4aaJonkvnYF93QQ=
=ZuAU
-----END PGP SIGNATURE-----
Merge tag 'integrity-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity subsystem updates from Mimi Zohar:
"Except for extending the 'encrypted' key type to support user provided
data, the rest is code cleanup, __setup() usage bug fix, and a trivial
change"
* tag 'integrity-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
MAINTAINERS: add missing security/integrity/platform_certs
EVM: fix the evm= __setup handler return value
KEYS: encrypted: Instantiate key with user-provided decrypted data
ima: define ima_max_digest_data struct without a flexible array variable
ima: rename IMA_ACTION_FLAGS to IMA_NONACTION_FLAGS
ima: Return error code obtained from securityfs functions
MAINTAINERS: add missing "security/integrity" directory
ima: Fix trivial typos in the comments
With the introduction of uefi_check_trust_mok_keys, it signifies the end-
user wants to trust the machine keyring as trusted keys. If they have
chosen to trust the machine keyring, load the qualifying keys into it
during boot, then link it to the secondary keyring . If the user has not
chosen to trust the machine keyring, it will be empty and not linked to
the secondary keyring.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Many UEFI Linux distributions boot using shim. The UEFI shim provides
what is called Machine Owner Keys (MOK). Shim uses both the UEFI Secure
Boot DB and MOK keys to validate the next step in the boot chain. The
MOK facility can be used to import user generated keys. These keys can
be used to sign an end-users development kernel build. When Linux
boots, both UEFI Secure Boot DB and MOK keys get loaded in the Linux
.platform keyring.
Define a new Linux keyring called machine. This keyring shall contain just
MOK keys and not the remaining keys in the platform keyring. This new
machine keyring will be used in follow on patches. Unlike keys in the
platform keyring, keys contained in the machine keyring will be trusted
within the kernel if the end-user has chosen to do so.
Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
To support larger hash digests in the 'iint' cache, instead of defining
the 'digest' field as the maximum digest size, the 'digest' field was
defined as a flexible array variable. The "ima_digest_data" struct was
wrapped inside a local structure with the maximum digest size. But
before adding the record to the iint cache, memory for the exact digest
size was dynamically allocated.
The original reason for defining the 'digest' field as a flexible array
variable is still valid for the 'iint' cache use case. Instead of
wrapping the 'ima_digest_data' struct in a local structure define
'ima_max_digest_data' struct.
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Simple policy rule options, such as fowner, uid, or euid, can be checked
immediately, while other policy rule options, such as requiring a file
signature, need to be deferred.
The 'flags' field in the integrity_iint_cache struct contains the policy
action', 'subaction', and non action/subaction.
action: measure/measured, appraise/appraised, (collect)/collected,
audit/audited
subaction: appraise status for each hook (e.g. file, mmap, bprm, read,
creds)
non action/subaction: deferred policy rule options and state
Rename the IMA_ACTION_FLAGS to IMA_NONACTION_FLAGS.
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Currently <crypto/sha.h> contains declarations for both SHA-1 and SHA-2,
and <crypto/sha3.h> contains declarations for SHA-3.
This organization is inconsistent, but more importantly SHA-1 is no
longer considered to be cryptographically secure. So to the extent
possible, SHA-1 shouldn't be grouped together with any of the other SHA
versions, and usage of it should be phased out.
Therefore, split <crypto/sha.h> into two headers <crypto/sha1.h> and
<crypto/sha2.h>, and make everyone explicitly specify whether they want
the declarations for SHA-1, SHA-2, or both.
This avoids making the SHA-1 declarations visible to files that don't
want anything to do with SHA-1. It also prepares for potentially moving
sha1.h into a new insecure/ or dangerous/ directory.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Error code is not included in the audit messages logged by
the integrity subsystem.
Define a new function integrity_audit_message() that takes error code
in the "errno" parameter. Add "errno" field in the audit messages logged
by the integrity subsystem and set the value passed in the "errno"
parameter.
[ 6.303048] audit: type=1804 audit(1592506281.627:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel op=measuring_key cause=ENOMEM comm="swapper/0" name=".builtin_trusted_keys" res=0 errno=-12
[ 7.987647] audit: type=1802 audit(1592506283.312:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 op=policy_update cause=completed comm="systemd" res=1 errno=0
[ 8.019432] audit: type=1804 audit(1592506283.344:10): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 op=measuring_kexec_cmdline cause=hashing_error comm="systemd" name="kexec-cmdline" res=0 errno=-22
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Suggested-by: Steve Grubb <sgrubb@redhat.com>
Suggested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
There is a regular need in the kernel to provide a way to declare having a
dynamically sized set of trailing elements in a structure. Kernel code should
always use “flexible array members”[1] for these cases. The older style of
one-element or zero-length arrays should no longer be used[2].
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://github.com/KSPP/linux/issues/21
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
The #define for formatting log messages, pr_fmt, is duplicated in the
files under security/integrity.
This change moves the definition to security/integrity/integrity.h and
removes the duplicate definitions in the other files under
security/integrity.
With this change, the messages in the following files will be prefixed
with 'integrity'.
security/integrity/platform_certs/platform_keyring.c
security/integrity/platform_certs/load_powerpc.c
security/integrity/platform_certs/load_uefi.c
security/integrity/iint.c
e.g. "integrity: Error adding keys to platform keyring %s\n"
And the messages in the following file will be prefixed with 'ima'.
security/integrity/ima/ima_mok.c
e.g. "ima: Allocating IMA blacklist keyring.\n"
For the rest of the files under security/integrity, there will be no
change in the message format.
Suggested-by: Shuah Khan <skhan@linuxfoundation.org>
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Reviewed-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Asymmetric private keys are used to sign multiple files. The kernel
currently supports checking against blacklisted keys. However, if the
public key is blacklisted, any file signed by the blacklisted key will
automatically fail signature verification. Blacklisting the public key
is not fine enough granularity, as we might want to only blacklist a
particular file.
This patch adds support for checking against the blacklisted hash of
the file, without the appended signature, based on the IMA policy. It
defines a new policy option "appraise_flag=check_blacklist".
In addition to the blacklisted binary hashes stored in the firmware
"dbx" variable, the Linux kernel may be configured to load blacklisted
binary hashes onto the .blacklist keyring as well. The following
example shows how to blacklist a specific kernel module hash.
$ sha256sum kernel/kheaders.ko
77fa889b35a05338ec52e51591c1b89d4c8d1c99a21251d7c22b1a8642a6bad3
kernel/kheaders.ko
$ grep BLACKLIST .config
CONFIG_SYSTEM_BLACKLIST_KEYRING=y
CONFIG_SYSTEM_BLACKLIST_HASH_LIST="blacklist-hash-list"
$ cat certs/blacklist-hash-list
"bin:77fa889b35a05338ec52e51591c1b89d4c8d1c99a21251d7c22b1a8642a6bad3"
Update the IMA custom measurement and appraisal policy
rules (/etc/ima-policy):
measure func=MODULE_CHECK template=ima-modsig
appraise func=MODULE_CHECK appraise_flag=check_blacklist
appraise_type=imasig|modsig
After building, installing, and rebooting the kernel:
545660333 ---lswrv 0 0 \_ blacklist:
bin:77fa889b35a05338ec52e51591c1b89d4c8d1c99a21251d7c22b1a8642a6bad3
measure func=MODULE_CHECK template=ima-modsig
appraise func=MODULE_CHECK appraise_flag=check_blacklist
appraise_type=imasig|modsig
modprobe: ERROR: could not insert 'kheaders': Permission denied
10 0c9834db5a0182c1fb0cdc5d3adcf11a11fd83dd ima-sig
sha256:3bc6ed4f0b4d6e31bc1dbc9ef844605abc7afdc6d81a57d77a1ec9407997c40
2 /usr/lib/modules/5.4.0-rc3+/kernel/kernel/kheaders.ko
10 82aad2bcc3fa8ed94762356b5c14838f3bcfa6a0 ima-modsig
sha256:3bc6ed4f0b4d6e31bc1dbc9ef844605abc7afdc6d81a57d77a1ec9407997c40
2 /usr/lib/modules/5.4.0rc3+/kernel/kernel/kheaders.ko sha256:77fa889b3
5a05338ec52e51591c1b89d4c8d1c99a21251d7c22b1a8642a6bad3
3082029a06092a864886f70d010702a082028b30820287020101310d300b0609608648
016503040201300b06092a864886f70d01070131820264....
10 25b72217cc1152b44b134ce2cd68f12dfb71acb3 ima-buf
sha256:8b58427fedcf8f4b20bc8dc007f2e232bf7285d7b93a66476321f9c2a3aa132
b blacklisted-hash
77fa889b35a05338ec52e51591c1b89d4c8d1c99a21251d7c22b1a8642a6bad3
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
[zohar@linux.ibm.com: updated patch description]
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1572492694-6520-8-git-send-email-zohar@linux.ibm.com
Implement the appraise_type=imasig|modsig option, allowing IMA to read and
verify modsig signatures.
In case a file has both an xattr signature and an appended modsig, IMA will
only use the appended signature if the key used by the xattr signature
isn't present in the IMA or platform keyring.
Because modsig verification needs to convert from an integrity keyring id
to the keyring itself, add an integrity_keyring_from_id() function in
digsig.c so that integrity_modsig_verify() can use it.
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Introduce the modsig keyword to the IMA policy syntax to specify that
a given hook should expect the file to have the IMA signature appended
to it. Here is how it can be used in a rule:
appraise func=KEXEC_KERNEL_CHECK appraise_type=imasig|modsig
With this rule, IMA will accept either a signature stored in the extended
attribute or an appended signature.
For now, the rule above will behave exactly the same as if
appraise_type=imasig was specified. The actual modsig implementation
will be introduced separately.
Suggested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Pull integrity updates from Mimi Zohar:
"Bug fixes, code clean up, and new features:
- IMA policy rules can be defined in terms of LSM labels, making the
IMA policy dependent on LSM policy label changes, in particular LSM
label deletions. The new environment, in which IMA-appraisal is
being used, frequently updates the LSM policy and permits LSM label
deletions.
- Prevent an mmap'ed shared file opened for write from also being
mmap'ed execute. In the long term, making this and other similar
changes at the VFS layer would be preferable.
- The IMA per policy rule template format support is needed for a
couple of new/proposed features (eg. kexec boot command line
measurement, appended signatures, and VFS provided file hashes).
- Other than the "boot-aggregate" record in the IMA measuremeent
list, all other measurements are of file data. Measuring and
storing the kexec boot command line in the IMA measurement list is
the first buffer based measurement included in the measurement
list"
* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
integrity: Introduce struct evm_xattr
ima: Update MAX_TEMPLATE_NAME_LEN to fit largest reasonable definition
KEXEC: Call ima_kexec_cmdline to measure the boot command line args
IMA: Define a new template field buf
IMA: Define a new hook to measure the kexec boot command line arguments
IMA: support for per policy rule template formats
integrity: Fix __integrity_init_keyring() section mismatch
ima: Use designated initializers for struct ima_event_data
ima: use the lsm policy update notifier
LSM: switch to blocking policy update notifiers
x86/ima: fix the Kconfig dependency for IMA_ARCH_POLICY
ima: Make arch_policy_entry static
ima: prevent a file already mmap'ed write to be mmap'ed execute
x86/ima: check EFI SetupMode too
-----BEGIN PGP SIGNATURE-----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=E3bF
-----END PGP SIGNATURE-----
Merge tag 'keys-acl-20190703' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull keyring ACL support from David Howells:
"This changes the permissions model used by keys and keyrings to be
based on an internal ACL by the following means:
- Replace the permissions mask internally with an ACL that contains a
list of ACEs, each with a specific subject with a permissions mask.
Potted default ACLs are available for new keys and keyrings.
ACE subjects can be macroised to indicate the UID and GID specified
on the key (which remain). Future commits will be able to add
additional subject types, such as specific UIDs or domain
tags/namespaces.
Also split a number of permissions to give finer control. Examples
include splitting the revocation permit from the change-attributes
permit, thereby allowing someone to be granted permission to revoke
a key without allowing them to change the owner; also the ability
to join a keyring is split from the ability to link to it, thereby
stopping a process accessing a keyring by joining it and thus
acquiring use of possessor permits.
- Provide a keyctl to allow the granting or denial of one or more
permits to a specific subject. Direct access to the ACL is not
granted, and the ACL cannot be viewed"
* tag 'keys-acl-20190703' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
keys: Provide KEYCTL_GRANT_PERMISSION
keys: Replace uid/gid/perm permissions checking with an ACL
Even though struct evm_ima_xattr_data includes a fixed-size array to hold a
SHA1 digest, most of the code ignores the array and uses the struct to mean
"type indicator followed by data of unspecified size" and tracks the real
size of what the struct represents in a separate length variable.
The only exception to that is the EVM code, which correctly uses the
definition of struct evm_ima_xattr_data.
So make this explicit in the code by removing the length specification from
the array in struct evm_ima_xattr_data. Also, change the name of the
element from digest to data since in most places the array doesn't hold a
digest.
A separate struct evm_xattr is introduced, with the original definition of
evm_ima_xattr_data to be used in the places that actually expect that
definition, specifically the EVM HMAC code.
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Replace the uid/gid/perm permissions checking on a key with an ACL to allow
the SETATTR and SEARCH permissions to be split. This will also allow a
greater range of subjects to represented.
============
WHY DO THIS?
============
The problem is that SETATTR and SEARCH cover a slew of actions, not all of
which should be grouped together.
For SETATTR, this includes actions that are about controlling access to a
key:
(1) Changing a key's ownership.
(2) Changing a key's security information.
(3) Setting a keyring's restriction.
And actions that are about managing a key's lifetime:
(4) Setting an expiry time.
(5) Revoking a key.
and (proposed) managing a key as part of a cache:
(6) Invalidating a key.
Managing a key's lifetime doesn't really have anything to do with
controlling access to that key.
Expiry time is awkward since it's more about the lifetime of the content
and so, in some ways goes better with WRITE permission. It can, however,
be set unconditionally by a process with an appropriate authorisation token
for instantiating a key, and can also be set by the key type driver when a
key is instantiated, so lumping it with the access-controlling actions is
probably okay.
As for SEARCH permission, that currently covers:
(1) Finding keys in a keyring tree during a search.
(2) Permitting keyrings to be joined.
(3) Invalidation.
But these don't really belong together either, since these actions really
need to be controlled separately.
Finally, there are number of special cases to do with granting the
administrator special rights to invalidate or clear keys that I would like
to handle with the ACL rather than key flags and special checks.
===============
WHAT IS CHANGED
===============
The SETATTR permission is split to create two new permissions:
(1) SET_SECURITY - which allows the key's owner, group and ACL to be
changed and a restriction to be placed on a keyring.
(2) REVOKE - which allows a key to be revoked.
The SEARCH permission is split to create:
(1) SEARCH - which allows a keyring to be search and a key to be found.
(2) JOIN - which allows a keyring to be joined as a session keyring.
(3) INVAL - which allows a key to be invalidated.
The WRITE permission is also split to create:
(1) WRITE - which allows a key's content to be altered and links to be
added, removed and replaced in a keyring.
(2) CLEAR - which allows a keyring to be cleared completely. This is
split out to make it possible to give just this to an administrator.
(3) REVOKE - see above.
Keys acquire ACLs which consist of a series of ACEs, and all that apply are
unioned together. An ACE specifies a subject, such as:
(*) Possessor - permitted to anyone who 'possesses' a key
(*) Owner - permitted to the key owner
(*) Group - permitted to the key group
(*) Everyone - permitted to everyone
Note that 'Other' has been replaced with 'Everyone' on the assumption that
you wouldn't grant a permit to 'Other' that you wouldn't also grant to
everyone else.
Further subjects may be made available by later patches.
The ACE also specifies a permissions mask. The set of permissions is now:
VIEW Can view the key metadata
READ Can read the key content
WRITE Can update/modify the key content
SEARCH Can find the key by searching/requesting
LINK Can make a link to the key
SET_SECURITY Can change owner, ACL, expiry
INVAL Can invalidate
REVOKE Can revoke
JOIN Can join this keyring
CLEAR Can clear this keyring
The KEYCTL_SETPERM function is then deprecated.
The KEYCTL_SET_TIMEOUT function then is permitted if SET_SECURITY is set,
or if the caller has a valid instantiation auth token.
The KEYCTL_INVALIDATE function then requires INVAL.
The KEYCTL_REVOKE function then requires REVOKE.
The KEYCTL_JOIN_SESSION_KEYRING function then requires JOIN to join an
existing keyring.
The JOIN permission is enabled by default for session keyrings and manually
created keyrings only.
======================
BACKWARD COMPATIBILITY
======================
To maintain backward compatibility, KEYCTL_SETPERM will translate the
permissions mask it is given into a new ACL for a key - unless
KEYCTL_SET_ACL has been called on that key, in which case an error will be
returned.
It will convert possessor, owner, group and other permissions into separate
ACEs, if each portion of the mask is non-zero.
SETATTR permission turns on all of INVAL, REVOKE and SET_SECURITY. WRITE
permission turns on WRITE, REVOKE and, if a keyring, CLEAR. JOIN is turned
on if a keyring is being altered.
The KEYCTL_DESCRIBE function translates the ACL back into a permissions
mask to return depending on possessor, owner, group and everyone ACEs.
It will make the following mappings:
(1) INVAL, JOIN -> SEARCH
(2) SET_SECURITY -> SETATTR
(3) REVOKE -> WRITE if SETATTR isn't already set
(4) CLEAR -> WRITE
Note that the value subsequently returned by KEYCTL_DESCRIBE may not match
the value set with KEYCTL_SETATTR.
=======
TESTING
=======
This passes the keyutils testsuite for all but a couple of tests:
(1) tests/keyctl/dh_compute/badargs: The first wrong-key-type test now
returns EOPNOTSUPP rather than ENOKEY as READ permission isn't removed
if the type doesn't have ->read(). You still can't actually read the
key.
(2) tests/keyctl/permitting/valid: The view-other-permissions test doesn't
work as Other has been replaced with Everyone in the ACL.
Signed-off-by: David Howells <dhowells@redhat.com>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation version 2 of the license
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 315 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Armijn Hemel <armijn@tjaldur.nl>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190531190115.503150771@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
From what I can tell, it has never been used.
Mimi: This was introduced prior to Rusty's decision to use appended
signatures for kernel modules.
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Acked-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
The patch refactors integrity_load_x509(), making it a wrapper for a new
function named integrity_add_key(). This patch also defines a new
function named integrity_load_cert() for loading the platform keys.
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: James Morris <james.morris@microsoft.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
On secure boot enabled systems, a verified kernel may need to kexec
additional kernels. For example, it may be used as a bootloader needing
to kexec a target kernel or it may need to kexec a crashdump kernel. In
such cases, it may want to verify the signature of the next kernel
image.
It is further possible that the kernel image is signed with third party
keys which are stored as platform or firmware keys in the 'db' variable.
The kernel, however, can not directly verify these platform keys, and an
administrator may therefore not want to trust them for arbitrary usage.
In order to differentiate platform keys from other keys and provide the
necessary separation of trust, the kernel needs an additional keyring to
store platform keys.
This patch creates the new keyring called ".platform" to isolate keys
provided by platform from keys by kernel. These keys are used to
facilitate signature verification during kexec. Since the scope of this
keyring is only the platform/firmware keys, it cannot be updated from
userspace.
This keyring can be enabled by setting CONFIG_INTEGRITY_PLATFORM_KEYRING.
Signed-off-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: James Morris <james.morris@microsoft.com>
Reviewed-by: Thiago Jung Bauermann <bauerman@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
If Integrity is not auditing, IMA shouldn't audit, either.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
We want to add additional evm control nodes, and it'd be preferable not
to clutter up the securityfs root directory any further. Create a new
integrity directory, move the ima directory into it, create an evm
directory for the evm attribute and add compatibility symlinks.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
This macro isn't used anymore since commit 0d73a55208 ("ima: re-introduce
own integrity cache lock"), so remove it.
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
This patch addresses the fuse privileged mounted filesystems in
environments which are unwilling to accept the risk of trusting the
signature verification and want to always fail safe, but are for example
using a pre-built kernel.
This patch defines a new builtin policy named "fail_securely", which can
be specified on the boot command line as an argument to "ima_policy=".
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Seth Forshee <seth.forshee@canonical.com>
Cc: Dongsu Park <dongsu@kinvolk.io>
Cc: Alban Crequy <alban@kinvolk.io>
Acked-by: Serge Hallyn <serge@hallyn.com>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
The existing BPRM_CHECK functionality in IMA validates against the
credentials of the existing process, not any new credentials that the
child process may transition to. Add an additional CREDS_CHECK target
and refactor IMA to pass the appropriate creds structure. In
ima_bprm_check(), check with both the existing process credentials and
the credentials that will be committed when the new process is started.
This will not change behaviour unless the system policy is extended to
include CREDS_CHECK targets - BPRM_CHECK will continue to check the same
credentials that it did previously.
After this patch, an IMA policy rule along the lines of:
measure func=CREDS_CHECK subj_type=unconfined_t
will trigger if a process is executed and runs as unconfined_t, ignoring
the context of the parent process. This is in contrast to:
measure func=BPRM_CHECK subj_type=unconfined_t
which will trigger if the process that calls exec() is already executing
in unconfined_t, ignoring the context that the child process executes
into.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Changelog:
- initialize ima_creds_status
The builtin ima_appraise_tcb policy, which is specified on the boot
command line, can be replaced with a custom policy, normally early in
the boot process. Custom policies can be more restrictive in some ways,
like requiring file signatures, but can be less restrictive in other
ways, like not appraising mutable files. With a less restrictive policy
in place, files in the builtin policy might not be hashed and labeled
with a security.ima hash. On reboot, files which should be labeled in
the ima_appraise_tcb are not labeled, possibly preventing the system
from booting properly.
To resolve this problem, this patch extends the existing IMA policy
actions "measure", "dont_measure", "appraise", "dont_appraise", and
"audit" with "hash" and "dont_hash". The new "hash" action will write
the file hash as security.ima, but without requiring the file to be
appraised as well.
For example, the builtin ima_appraise_tcb policy includes the rule,
"appraise fowner=0". Adding the "hash fowner=0" rule to a custom
policy, will cause the needed file hashes to be calculated and written
as security.ima xattrs.
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Before IMA appraisal was introduced, IMA was using own integrity cache
lock along with i_mutex. process_measurement and ima_file_free took
the iint->mutex first and then the i_mutex, while setxattr, chmod and
chown took the locks in reverse order. To resolve the potential deadlock,
i_mutex was moved to protect entire IMA functionality and the redundant
iint->mutex was eliminated.
Solution was based on the assumption that filesystem code does not take
i_mutex further. But when file is opened with O_DIRECT flag, direct-io
implementation takes i_mutex and produces deadlock. Furthermore, certain
other filesystem operations, such as llseek, also take i_mutex.
More recently some filesystems have replaced their filesystem specific
lock with the global i_rwsem to read a file. As a result, when IMA
attempts to calculate the file hash, reading the file attempts to take
the i_rwsem again.
To resolve O_DIRECT related deadlock problem, this patch re-introduces
iint->mutex. But to eliminate the original chmod() related deadlock
problem, this patch eliminates the requirement for chmod hooks to take
the iint->mutex by introducing additional atomic iint->attr_flags to
indicate calling of the hooks. The allowed locking order is to take
the iint->mutex first and then the i_rwsem.
Original flags were cleared in chmod(), setxattr() or removwxattr()
hooks and tested when file was closed or opened again. New atomic flags
are set or cleared in those hooks and tested to clear iint->flags on
close or on open.
Atomic flags are following:
* IMA_CHANGE_ATTR - indicates that chATTR() was called (chmod, chown,
chgrp) and file attributes have changed. On file open, it causes IMA
to clear iint->flags to re-evaluate policy and perform IMA functions
again.
* IMA_CHANGE_XATTR - indicates that setxattr or removexattr was called
and extended attributes have changed. On file open, it causes IMA to
clear iint->flags IMA_DONE_MASK to re-appraise.
* IMA_UPDATE_XATTR - indicates that security.ima needs to be updated.
It is cleared if file policy changes and no update is needed.
* IMA_DIGSIG - indicates that file security.ima has signature and file
security.ima must not update to file has on file close.
* IMA_MUST_MEASURE - indicates the file is in the measurement policy.
Fixes: Commit 6552321831 ("xfs: remove i_iolock and use i_rwsem in
the VFS inode instead")
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
The EVM signature includes the inode number and (optionally) the
filesystem UUID, making it impractical to ship EVM signatures in
packages. This patch adds a new portable format intended to allow
distributions to include EVM signatures. It is identical to the existing
format but hardcodes the inode and generation numbers to 0 and does not
include the filesystem UUID even if the kernel is configured to do so.
Removing the inode means that the metadata and signature from one file
could be copied to another file without invalidating it. This is avoided
by ensuring that an IMA xattr is present during EVM validation.
Portable signatures are intended to be immutable - ie, they will never
be transformed into HMACs.
Based on earlier work by Dmitry Kasatkin and Mikhail Kurinnoi.
Signed-off-by: Matthew Garrett <mjg59@google.com>
Cc: Dmitry Kasatkin <dmitry.kasatkin@huawei.com>
Cc: Mikhail Kurinnoi <viewizard@viewizard.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
The CONFIG_IMA_LOAD_X509 and CONFIG_EVM_LOAD_X509 options permit
loading x509 signed certificates onto the trusted keyrings without
verifying the x509 certificate file's signature.
This patch replaces the call to the integrity_read_file() specific
function with the common kernel_read_file_from_path() function.
To avoid verifying the file signature, this patch defines
READING_X509_CERTFICATE.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
These changes are too small to warrant their own patches:
The keyid and sig_size members of struct signature_v2_hdr are in BE format,
so use a type that makes this assumption explicit. Also, use beXX_to_cpu
instead of __beXX_to_cpu to read them.
Change integrity_kernel_read to take a void * buffer instead of char *
buffer, so that callers don't have to use a cast if they provide a buffer
that isn't a char *.
Add missing #endif comment in ima.h pointing out which macro it refers to.
Add missing fall through comment in ima_appraise.c.
Constify mask_tokens and func_tokens arrays.
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
To keep track of which measurements have been extended to which PCRs, this
patch defines a new integrity_iint_cache field named measured_pcrs. This
field is a bitmask of the PCRs measured. Each bit corresponds to a PCR
index. For example, bit 10 corresponds to PCR 10.
Signed-off-by: Eric Richter <erichte@linux.vnet.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Changing file metadata (eg. uid, guid) could result in having to
re-appraise a file's integrity, but does not change the "new file"
status nor the security.ima xattr. The IMA_PERMIT_DIRECTIO and
IMA_DIGSIG_REQUIRED flags are policy rule specific. This patch
only resets these flags, not the IMA_NEW_FILE or IMA_DIGSIG flags.
With this patch, changing the file timestamp will not remove the
file signature on new files.
Reported-by: Dmitry Rozhkov <dmitry.rozhkov@linux.intel.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Tested-by: Dmitry Rozhkov <dmitry.rozhkov@linux.intel.com>
Make the identifier public key and digest algorithm fields text instead of
enum.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Each time a file is read by the kernel, the file should be re-measured and
the file signature re-appraised, based on policy. As there is no need to
preserve the status information, this patch replaces the firmware and
module specific cache status with a generic one named read_file.
This change simplifies adding support for other files read by the kernel.
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: Petko Manolov <petkan@mip-labs.com>
Acked-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com>
This patch defines a new IMA hook ima_post_read_file() for measuring
and appraising files read by the kernel. The caller loads the file into
memory before calling this function, which calculates the hash followed by
the normal IMA policy based processing.
Changelog v5:
- fail ima_post_read_file() if either file or buf is NULL
v3:
- rename ima_hash_and_process_file() to ima_post_read_file()
v1:
- split patch
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Acked-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com>
This patch defines a configuration option and the evm_load_x509() hook
to load an X509 certificate onto the EVM trusted kernel keyring.
Changes in v4:
* Patch description updated
Changes in v3:
* Removed EVM_X509_PATH definition. CONFIG_EVM_X509_PATH is used
directly.
Changes in v2:
* default key patch changed to /etc/keys
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Require all keys added to the EVM keyring be signed by an
existing trusted key on the system trusted keyring.
This patch also switches IMA to use integrity_init_keyring().
Changes in v3:
* Added 'init_keyring' config based variable to skip initializing
keyring instead of using __integrity_init_keyring() wrapper.
* Added dependency back to CONFIG_IMA_TRUSTED_KEYRING
Changes in v2:
* Replace CONFIG_EVM_TRUSTED_KEYRING with IMA and EVM common
CONFIG_INTEGRITY_TRUSTED_KEYRING configuration option
* Deprecate CONFIG_IMA_TRUSTED_KEYRING but keep it for config
file compatibility. (Mimi Zohar)
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@huawei.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
This patch adds validity checks for 'path' parameter and
makes it const.
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Pull security layer updates from James Morris:
"In terms of changes, there's general maintenance to the Smack,
SELinux, and integrity code.
The IMA code adds a new kconfig option, IMA_APPRAISE_SIGNED_INIT,
which allows IMA appraisal to require signatures. Support for reading
keys from rootfs before init is call is also added"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (23 commits)
selinux: Remove security_ops extern
security: smack: fix out-of-bounds access in smk_parse_smack()
VFS: refactor vfs_read()
ima: require signature based appraisal
integrity: provide a hook to load keys when rootfs is ready
ima: load x509 certificate from the kernel
integrity: provide a function to load x509 certificate from the kernel
integrity: define a new function integrity_read_file()
Security: smack: replace kzalloc with kmem_cache for inode_smack
Smack: Lock mode for the floor and hat labels
ima: added support for new kernel cmdline parameter ima_template_fmt
ima: allocate field pointers array on demand in template_desc_init_fields()
ima: don't allocate a copy of template_fmt in template_desc_init_fields()
ima: display template format in meas. list if template name length is zero
ima: added error messages to template-related functions
ima: use atomic bit operations to protect policy update interface
ima: ignore empty and with whitespaces policy lines
ima: no need to allocate entry for comment
ima: report policy load status
ima: use path names cache
...
Define configuration option to load X509 certificate into the
IMA trusted kernel keyring. It implements ima_load_x509() hook
to load X509 certificate into the .ima trusted kernel keyring
from the root filesystem.
Changes in v3:
* use ima_policy_flag in ima_get_action()
ima_load_x509 temporarily clears ima_policy_flag to disable
appraisal to load key. Use it to skip appraisal rules.
* Key directory path changed to /etc/keys (Mimi)
* Expand IMA_LOAD_X509 Kconfig help
Changes in v2:
* added '__init'
* use ima_policy_flag to disable appraisal to load keys
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
Provide the function to load x509 certificates from the kernel into the
integrity kernel keyring.
Changes in v2:
* configuration option removed
* function declared as '__init'
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
This patch defines a new function called integrity_read_file()
to read file from the kernel into a buffer. Subsequent patches
will read a file containing the public keys and load them onto
the IMA keyring.
This patch moves and renames ima_kernel_read(), the non-security
checking version of kernel_read(), to integrity_kernel_read().
Changes in v3:
* Patch descriptions improved (Mimi)
* Add missing cast (kbuild test robot)
Changes in v2:
* configuration option removed
* function declared as '__init'
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
integrity_init_keyring() is used only from kernel '__init'
functions. Add it there as well.
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Signed-off-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
