mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-12-08 03:24:08 +08:00
b81b1829e7
3165 Commits
Author | SHA1 | Message | Date | |
---|---|---|---|---|
Linus Torvalds
|
f9f94c9d2c |
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu: "Fix two regressions: - Potential boot failure due to missing cryptomgr on initramfs - Stack overflow in octeontx2" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: api - Move cryptomgr soft dependency into algapi crypto: octeontx2 - Avoid stack variable overflow |
||
Herbert Xu
|
c6ce9c5831 |
crypto: api - Move cryptomgr soft dependency into algapi
The soft dependency on cryptomgr is only needed in algapi because
if algapi isn't present then no algorithms can be loaded. This
also fixes the case where api is built-in but algapi is built as
a module as the soft dependency would otherwise get lost.
Fixes:
|
||
Jason A. Donenfeld
|
d2a02e3c8b |
lib/crypto: blake2s: avoid indirect calls to compression function for Clang CFI
blake2s_compress_generic is weakly aliased by blake2s_compress. The
current harness for function selection uses a function pointer, which is
ordinarily inlined and resolved at compile time. But when Clang's CFI is
enabled, CFI still triggers when making an indirect call via a weak
symbol. This seems like a bug in Clang's CFI, as though it's bucketing
weak symbols and strong symbols differently. It also only seems to
trigger when "full LTO" mode is used, rather than "thin LTO".
[ 0.000000][ T0] Kernel panic - not syncing: CFI failure (target: blake2s_compress_generic+0x0/0x1444)
[ 0.000000][ T0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.16.0-mainline-06981-g076c855b846e #1
[ 0.000000][ T0] Hardware name: MT6873 (DT)
[ 0.000000][ T0] Call trace:
[ 0.000000][ T0] dump_backtrace+0xfc/0x1dc
[ 0.000000][ T0] dump_stack_lvl+0xa8/0x11c
[ 0.000000][ T0] panic+0x194/0x464
[ 0.000000][ T0] __cfi_check_fail+0x54/0x58
[ 0.000000][ T0] __cfi_slowpath_diag+0x354/0x4b0
[ 0.000000][ T0] blake2s_update+0x14c/0x178
[ 0.000000][ T0] _extract_entropy+0xf4/0x29c
[ 0.000000][ T0] crng_initialize_primary+0x24/0x94
[ 0.000000][ T0] rand_initialize+0x2c/0x6c
[ 0.000000][ T0] start_kernel+0x2f8/0x65c
[ 0.000000][ T0] __primary_switched+0xc4/0x7be4
[ 0.000000][ T0] Rebooting in 5 seconds..
Nonetheless, the function pointer method isn't so terrific anyway, so
this patch replaces it with a simple boolean, which also gets inlined
away. This successfully works around the Clang bug.
In general, I'm not too keen on all of the indirection involved here; it
clearly does more harm than good. Hopefully the whole thing can get
cleaned up down the road when lib/crypto is overhauled more
comprehensively. But for now, we go with a simple bandaid.
Fixes:
|
||
Justin M. Forbes
|
e56e189855 |
lib/crypto: add prompts back to crypto libraries
Commit |
||
Linus Torvalds
|
35ce8ae9ae |
Merge branch 'signal-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull signal/exit/ptrace updates from Eric Biederman: "This set of changes deletes some dead code, makes a lot of cleanups which hopefully make the code easier to follow, and fixes bugs found along the way. The end-game which I have not yet reached yet is for fatal signals that generate coredumps to be short-circuit deliverable from complete_signal, for force_siginfo_to_task not to require changing userspace configured signal delivery state, and for the ptrace stops to always happen in locations where we can guarantee on all architectures that the all of the registers are saved and available on the stack. Removal of profile_task_ext, profile_munmap, and profile_handoff_task are the big successes for dead code removal this round. A bunch of small bug fixes are included, as most of the issues reported were small enough that they would not affect bisection so I simply added the fixes and did not fold the fixes into the changes they were fixing. There was a bug that broke coredumps piped to systemd-coredump. I dropped the change that caused that bug and replaced it entirely with something much more restrained. Unfortunately that required some rebasing. Some successes after this set of changes: There are few enough calls to do_exit to audit in a reasonable amount of time. The lifetime of struct kthread now matches the lifetime of struct task, and the pointer to struct kthread is no longer stored in set_child_tid. The flag SIGNAL_GROUP_COREDUMP is removed. The field group_exit_task is removed. Issues where task->exit_code was examined with signal->group_exit_code should been examined were fixed. There are several loosely related changes included because I am cleaning up and if I don't include them they will probably get lost. The original postings of these changes can be found at: https://lkml.kernel.org/r/87a6ha4zsd.fsf@email.froward.int.ebiederm.org https://lkml.kernel.org/r/87bl1kunjj.fsf@email.froward.int.ebiederm.org https://lkml.kernel.org/r/87r19opkx1.fsf_-_@email.froward.int.ebiederm.org I trimmed back the last set of changes to only the obviously correct once. Simply because there was less time for review than I had hoped" * 'signal-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (44 commits) ptrace/m68k: Stop open coding ptrace_report_syscall ptrace: Remove unused regs argument from ptrace_report_syscall ptrace: Remove second setting of PT_SEIZED in ptrace_attach taskstats: Cleanup the use of task->exit_code exit: Use the correct exit_code in /proc/<pid>/stat exit: Fix the exit_code for wait_task_zombie exit: Coredumps reach do_group_exit exit: Remove profile_handoff_task exit: Remove profile_task_exit & profile_munmap signal: clean up kernel-doc comments signal: Remove the helper signal_group_exit signal: Rename group_exit_task group_exec_task coredump: Stop setting signal->group_exit_task signal: Remove SIGNAL_GROUP_COREDUMP signal: During coredumps set SIGNAL_GROUP_EXIT in zap_process signal: Make coredump handling explicit in complete_signal signal: Have prepare_signal detect coredumps using signal->core_state signal: Have the oom killer detect coredumps using signal->core_state exit: Move force_uaccess back into do_exit exit: Guarantee make_task_dead leaks the tsk when calling do_task_exit ... |
||
Linus Torvalds
|
dabd40ecaf |
tpmdd updates for Linux v5.17
-----BEGIN PGP SIGNATURE----- iIgEABYIADAWIQRE6pSOnaBC00OEHEIaerohdGur0gUCYdzf7hIcamFya2tvQGtl cm5lbC5vcmcACgkQGnq6IXRrq9IA/AEA2sX9fNNYSYnUwvi/Ju+Y8BgW4pA+GvA0 L8iSuUkWdssA/iQFdQ3vyDK0CI56G1jerKMyT7o8QEuJmUYogTRV7+oA =7q7g -----END PGP SIGNATURE----- Merge tag 'tpmdd-next-v5.17-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd Pull TPM updates from Jarkko Sakkinen: "Other than bug fixes for TPM, this includes a patch for asymmetric keys to allow to look up and verify with self-signed certificates (keys without so called AKID - Authority Key Identifier) using a new "dn:" prefix in the query" * tag 'tpmdd-next-v5.17-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: lib: remove redundant assignment to variable ret tpm: fix NPE on probe for missing device tpm: fix potential NULL pointer access in tpm_del_char_device tpm: Add Upgrade/Reduced mode support for TPM2 modules char: tpm: cr50: Set TPM_FIRMWARE_POWER_MANAGED based on device property keys: X.509 public key issuer lookup without AKID tpm_tis: Fix an error handling path in 'tpm_tis_core_init()' tpm: tpm_tis_spi_cr50: Add default RNG quality tpm/st33zp24: drop unneeded over-commenting tpm: add request_locality before write TPM_INT_ENABLE |
||
Linus Torvalds
|
5c947d0dba |
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu: "Algorithms: - Drop alignment requirement for data in aesni - Use synchronous seeding from the /dev/random in DRBG - Reseed nopr DRBGs every 5 minutes from /dev/random - Add KDF algorithms currently used by security/DH - Fix lack of entropy on some AMD CPUs with jitter RNG Drivers: - Add support for the D1 variant in sun8i-ce - Add SEV_INIT_EX support in ccp - PFVF support for GEN4 host driver in qat - Compression support for GEN4 devices in qat - Add cn10k random number generator support" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (145 commits) crypto: af_alg - rewrite NULL pointer check lib/mpi: Add the return value check of kcalloc() crypto: qat - fix definition of ring reset results crypto: hisilicon - cleanup warning in qm_get_qos_value() crypto: kdf - select SHA-256 required for self-test crypto: x86/aesni - don't require alignment of data crypto: ccp - remove unneeded semicolon crypto: stm32/crc32 - Fix kernel BUG triggered in probe() crypto: s390/sha512 - Use macros instead of direct IV numbers crypto: sparc/sha - remove duplicate hash init function crypto: powerpc/sha - remove duplicate hash init function crypto: mips/sha - remove duplicate hash init function crypto: sha256 - remove duplicate generic hash init function crypto: jitter - add oversampling of noise source MAINTAINERS: update SEC2 driver maintainers list crypto: ux500 - Use platform_get_irq() to get the interrupt crypto: hisilicon/qm - disable qm clock-gating crypto: omap-aes - Fix broken pm_runtime_and_get() usage MAINTAINERS: update caam crypto driver maintainers list crypto: octeontx2 - prevent underflow in get_cores_bmap() ... |
||
Andrew Zaborowski
|
7d30198ee2 |
keys: X.509 public key issuer lookup without AKID
There are non-root X.509 v3 certificates in use out there that contain no Authority Key Identifier extension (RFC5280 section 4.2.1.1). For trust verification purposes the kernel asymmetric key type keeps two struct asymmetric_key_id instances that the key can be looked up by, and another two to look up the key's issuer. The x509 public key type and the PKCS7 type generate them from the SKID and AKID extensions in the certificate. In effect current code has no way to look up the issuer certificate for verification without the AKID. To remedy this, add a third asymmetric_key_id blob to the arrays in both asymmetric_key_id's (for certficate subject) and in the public_keys_signature's auth_ids (for issuer lookup), using just raw subject and issuer DNs from the certificate. Adapt asymmetric_key_ids() and its callers to use the third ID for lookups when none of the other two are available. Attempt to keep the logic intact when they are, to minimise behaviour changes. Adapt the restrict functions' NULL-checks to include that ID too. Do not modify the lookup logic in pkcs7_verify.c, the AKID extensions are still required there. Internally use a new "dn:" prefix to the search specifier string generated for the key lookup in find_asymmetric_key(). This tells asymmetric_key_match_preparse to only match the data against the raw DN in the third ID and shouldn't conflict with search specifiers already in use. In effect implement what (2) in the struct asymmetric_key_id comment (include/keys/asymmetric-type.h) is probably talking about already, so do not modify that comment. It is also how "openssl verify" looks up issuer certificates without the AKID available. Lookups by the raw DN are unambiguous only provided that the CAs respect the condition in RFC5280 4.2.1.1 that the AKID may only be omitted if the CA uses a single signing key. The following is an example of two things that this change enables. A self-signed ceritficate is generated following the example from https://letsencrypt.org/docs/certificates-for-localhost/, and can be looked up by an identifier and verified against itself by linking to a restricted keyring -- both things not possible before due to the missing AKID extension: $ openssl req -x509 -out localhost.crt -outform DER -keyout localhost.key \ -newkey rsa:2048 -nodes -sha256 \ -subj '/CN=localhost' -extensions EXT -config <( \ echo -e "[dn]\nCN=localhost\n[req]\ndistinguished_name = dn\n[EXT]\n" \ "subjectAltName=DNS:localhost\nkeyUsage=digitalSignature\n" \ "extendedKeyUsage=serverAuth") $ keyring=`keyctl newring test @u` $ trusted=`keyctl padd asymmetric trusted $keyring < localhost.crt`; \ echo $trusted 39726322 $ keyctl search $keyring asymmetric dn:3112301006035504030c096c6f63616c686f7374 39726322 $ keyctl restrict_keyring $keyring asymmetric key_or_keyring:$trusted $ keyctl padd asymmetric verified $keyring < localhost.crt Signed-off-by: Andrew Zaborowski <andrew.zaborowski@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Acked-by: Jarkko Sakkinen <jarkko@kernel.org> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> |
||
Jiasheng Jiang
|
5f21d7d283 |
crypto: af_alg - rewrite NULL pointer check
Because of the possible alloc failure of the alloc_page(), it could return NULL pointer. And there is a check below the sg_assign_page(). But it will be more logical to move the NULL check before the sg_assign_page(). Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
Jason A. Donenfeld
|
6048fdcc5f |
lib/crypto: blake2s: include as built-in
In preparation for using blake2s in the RNG, we change the way that it is wired-in to the build system. Instead of using ifdefs to select the right symbol, we use weak symbols. And because ARM doesn't need the generic implementation, we make the generic one default only if an arch library doesn't need it already, and then have arch libraries that do need it opt-in. So that the arch libraries can remain tristate rather than bool, we then split the shash part from the glue code. Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: linux-kbuild@vger.kernel.org Cc: linux-crypto@vger.kernel.org Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> |
||
Stephan Müller
|
304b4acee2 |
crypto: kdf - select SHA-256 required for self-test
The self test of the KDF is based on SHA-256. Thus, this algorithm must be present as otherwise a warning is issued. Reported-by: kernel test robot <oliver.sang@intel.com> Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
Tianjia Zhang
|
96ede30f4b |
crypto: sha256 - remove duplicate generic hash init function
crypto_sha256_init() and sha256_base_init() are the same repeated implementations, remove the crypto_sha256_init() in generic implementation, sha224 is the same process. Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
Stephan Müller
|
908dffaf88 |
crypto: jitter - add oversampling of noise source
The output n bits can receive more than n bits of min entropy, of course, but the fixed output of the conditioning function can only asymptotically approach the output size bits of min entropy, not attain that bound. Random maps will tend to have output collisions, which reduces the creditable output entropy (that is what SP 800-90B Section 3.1.5.1.2 attempts to bound). The value "64" is justified in Appendix A.4 of the current 90C draft, and aligns with NIST's in "epsilon" definition in this document, which is that a string can be considered "full entropy" if you can bound the min entropy in each bit of output to at least 1-epsilon, where epsilon is required to be <= 2^(-32). Note, this patch causes the Jitter RNG to cut its performance in half in FIPS mode because the conditioning function of the LFSR produces 64 bits of entropy in one block. The oversampling requires that additionally 64 bits of entropy are sampled from the noise source. If the conditioner is changed, such as using SHA-256, the impact of the oversampling is only one fourth, because for the 256 bit block of the conditioner, only 64 additional bits from the noise source must be sampled. This patch is derived from the user space jitterentropy-library. Signed-off-by: Stephan Mueller <smueller@chronox.de> Reviewed-by: Simo Sorce <simo@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
Eric W. Biederman
|
ca3574bd65 |
exit: Rename module_put_and_exit to module_put_and_kthread_exit
Update module_put_and_exit to call kthread_exit instead of do_exit. Change the name to reflect this change in functionality. All of the users of module_put_and_exit are causing the current kthread to exit so this change makes it clear what is happening. There is no functional change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> |
||
Nicolai Stange
|
710ce4b88f |
crypto: jitter - quit sample collection loop upon RCT failure
The jitterentropy collection loop in jent_gen_entropy() can in principle run indefinitely without making any progress if it only receives stuck measurements as determined by jent_stuck(). After 31 consecutive stuck samples, the Repetition Count Test (RCT) would fail anyway and the jitterentropy RNG instances moved into ->health_failure == 1 state. jent_gen_entropy()'s caller, jent_read_entropy() would then check for this ->health_failure condition and return an error if found set. It follows that there's absolutely no point in continuing the collection loop in jent_gen_entropy() once the RCT has failed. Make the jitterentropy collection loop more robust by terminating it upon jent_health_failure() so that it won't continue to run indefinitely without making any progress. Signed-off-by: Nicolai Stange <nstange@suse.de> Reviewed-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
Nicolai Stange
|
b454fb7025 |
crypto: jitter - don't limit ->health_failure check to FIPS mode
The jitterentropy's Repetition Count Test (RCT) as well as the Adaptive Proportion Test (APT) are run unconditionally on any collected samples. However, their result, i.e. ->health_failure, will only get checked if fips_enabled is set, c.f. the jent_health_failure() wrapper. I would argue that a RCT or APT failure indicates that something's seriously off and that this should always be reported as an error, independently of whether FIPS mode is enabled or not: it should be up to callers whether or not and how to handle jitterentropy failures. Make jent_health_failure() to unconditionally return ->health_failure, independent of whether fips_enabled is set. Note that fips_enabled isn't accessed from the jitterentropy code anymore now. Remove the linux/fips.h include as well as the jent_fips_enabled() wrapper. Signed-off-by: Nicolai Stange <nstange@suse.de> Reviewed-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
Nicolai Stange
|
8f79772843 |
crypto: drbg - ignore jitterentropy errors if not in FIPS mode
A subsequent patch will make the jitterentropy RNG to unconditionally report health test errors back to callers, independent of whether fips_enabled is set or not. The DRBG needs access to a functional jitterentropy instance only in FIPS mode (because it's the only SP800-90B compliant entropy source as it currently stands). Thus, it is perfectly fine for the DRBGs to obtain entropy from the jitterentropy source only on a best effort basis if fips_enabled is off. Make the DRBGs to ignore jitterentropy failures if fips_enabled is not set. Signed-off-by: Nicolai Stange <nstange@suse.de> Reviewed-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
Guo Zhengkui
|
3219c2b1bd |
crypto: dh - remove duplicate includes
Remove a duplicate #include <linux/fips.h>. Signed-off-by: Guo Zhengkui <guozhengkui@vivo.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
Stephan Müller
|
330507fbc9 |
crypto: des - disallow des3 in FIPS mode
On Dec 31 2023 NIST sunsets TDES for FIPS use. To prevent FIPS validations to be completed in the future to be affected by the TDES sunsetting, disallow TDES already now. Otherwise a FIPS validation would need to be "touched again" end 2023 to handle TDES accordingly. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
Stephan Müller
|
1e146c393b |
crypto: dh - limit key size to 2048 in FIPS mode
FIPS disallows DH with keys < 2048 bits. Thus, the kernel should consider the enforcement of this limit. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
Stephan Müller
|
1ce1bacc48 |
crypto: rsa - limit key size to 2048 in FIPS mode
FIPS disallows RSA with keys < 2048 bits. Thus, the kernel should consider the enforcement of this limit. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
Stephan Müller
|
552d03a223 |
crypto: jitter - consider 32 LSB for APT
The APT compares the current time stamp with a pre-set value. The current code only considered the 4 LSB only. Yet, after reviews by mathematicians of the user space Jitter RNG version >= 3.1.0, it was concluded that the APT can be calculated on the 32 LSB of the time delta. Thi change is applied to the kernel. This fixes a bug where an AMD EPYC fails this test as its RDTSC value contains zeros in the LSB. The most appropriate fix would have been to apply a GCD calculation and divide the time stamp by the GCD. Yet, this is a significant code change that will be considered for a future update. Note, tests showed that constantly the GCD always was 32 on these systems, i.e. the 5 LSB were always zero (thus failing the APT since it only considered the 4 LSB for its calculation). Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
Stephan Müller
|
026a733e66 |
crypto: kdf - add SP800-108 counter key derivation function
SP800-108 defines three KDFs - this patch provides the counter KDF implementation. The KDF is implemented as a service function where the caller has to maintain the hash / HMAC state. Apart from this hash/HMAC state, no additional state is required to be maintained by either the caller or the KDF implementation. The key for the KDF is set with the crypto_kdf108_setkey function which is intended to be invoked before the caller requests a key derivation operation via crypto_kdf108_ctr_generate. SP800-108 allows the use of either a HMAC or a hash as crypto primitive for the KDF. When a HMAC primtive is intended to be used, crypto_kdf108_setkey must be used to set the HMAC key. Otherwise, for a hash crypto primitve crypto_kdf108_ctr_generate can be used immediately after allocating the hash handle. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
Nicolai Stange
|
8ea5ee00be |
crypto: drbg - reseed 'nopr' drbgs periodically from get_random_bytes()
In contrast to the fully prediction resistant 'pr' DRBGs, the 'nopr' variants get seeded once at boot and reseeded only rarely thereafter, namely only after 2^20 requests have been served each. AFAICT, this reseeding based on the number of requests served is primarily motivated by information theoretic considerations, c.f. NIST SP800-90Ar1, sec. 8.6.8 ("Reseeding"). However, given the relatively large seed lifetime of 2^20 requests, the 'nopr' DRBGs can hardly be considered to provide any prediction resistance whatsoever, i.e. to protect against threats like side channel leaks of the internal DRBG state (think e.g. leaked VM snapshots). This is expected and completely in line with the 'nopr' naming, but as e.g. the "drbg_nopr_hmac_sha512" implementation is potentially being used for providing the "stdrng" and thus, the crypto_default_rng serving the in-kernel crypto, it would certainly be desirable to achieve at least the same level of prediction resistance as get_random_bytes() does. Note that the chacha20 rngs underlying get_random_bytes() get reseeded every CRNG_RESEED_INTERVAL == 5min: the secondary, per-NUMA node rngs from the primary one and the primary rng in turn from the entropy pool, provided sufficient entropy is available. The 'nopr' DRBGs do draw randomness from get_random_bytes() for their initial seed already, so making them to reseed themselves periodically from get_random_bytes() in order to let them benefit from the latter's prediction resistance is not such a big change conceptually. In principle, it would have been also possible to make the 'nopr' DRBGs to periodically invoke a full reseeding operation, i.e. to also consider the jitterentropy source (if enabled) in addition to get_random_bytes() for the seed value. However, get_random_bytes() is relatively lightweight as compared to the jitterentropy generation process and thus, even though the 'nopr' reseeding is supposed to get invoked infrequently, it's IMO still worthwhile to avoid occasional latency spikes for drbg_generate() and stick to get_random_bytes() only. As an additional remark, note that drawing randomness from the non-SP800-90B-conforming get_random_bytes() only won't adversely affect SP800-90A conformance either: the very same is being done during boot via drbg_seed_from_random() already once rng_is_initialized() flips to true and it follows that if the DRBG implementation does conform to SP800-90A now, it will continue to do so. Make the 'nopr' DRBGs to reseed themselves periodically from get_random_bytes() every CRNG_RESEED_INTERVAL == 5min. More specifically, introduce a new member ->last_seed_time to struct drbg_state for recording in units of jiffies when the last seeding operation had taken place. Make __drbg_seed() maintain it and let drbg_generate() invoke a reseed from get_random_bytes() via drbg_seed_from_random() if more than 5min have passed by since the last seeding operation. Be careful to not to reseed if in testing mode though, or otherwise the drbg related tests in crypto/testmgr.c would fail to reproduce the expected output. In order to keep the formatting clean in drbg_generate() wrap the logic for deciding whether or not a reseed is due in a new helper, drbg_nopr_reseed_interval_elapsed(). Signed-off-by: Nicolai Stange <nstange@suse.de> Reviewed-by: Stephan Müller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
Nicolai Stange
|
559edd47cc |
crypto: drbg - make drbg_prepare_hrng() handle jent instantiation errors
Now that drbg_prepare_hrng() doesn't do anything but to instantiate a jitterentropy crypto_rng instance, it looks a little odd to have the related error handling at its only caller, drbg_instantiate(). Move the handling of jitterentropy allocation failures from drbg_instantiate() close to the allocation itself in drbg_prepare_hrng(). There is no change in behaviour. Signed-off-by: Nicolai Stange <nstange@suse.de> Reviewed-by: Stephan Müller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
Nicolai Stange
|
074bcd4000 |
crypto: drbg - make reseeding from get_random_bytes() synchronous
get_random_bytes() usually hasn't full entropy available by the time DRBG instances are first getting seeded from it during boot. Thus, the DRBG implementation registers random_ready_callbacks which would in turn schedule some work for reseeding the DRBGs once get_random_bytes() has sufficient entropy available. For reference, the relevant history around handling DRBG (re)seeding in the context of a not yet fully seeded get_random_bytes() is: commit |
||
Nicolai Stange
|
262d83a429 |
crypto: drbg - move dynamic ->reseed_threshold adjustments to __drbg_seed()
Since commit
|
||
Nicolai Stange
|
2bcd254438 |
crypto: drbg - track whether DRBG was seeded with !rng_is_initialized()
Currently, the DRBG implementation schedules asynchronous works from random_ready_callbacks for reseeding the DRBG instances with output from get_random_bytes() once the latter has sufficient entropy available. However, as the get_random_bytes() initialization state can get queried by means of rng_is_initialized() now, there is no real need for this asynchronous reseeding logic anymore and it's better to keep things simple by doing it synchronously when needed instead, i.e. from drbg_generate() once rng_is_initialized() has flipped to true. Of course, for this to work, drbg_generate() would need some means by which it can tell whether or not rng_is_initialized() has flipped to true since the last seeding from get_random_bytes(). Or equivalently, whether or not the last seed from get_random_bytes() has happened when rng_is_initialized() was still evaluating to false. As it currently stands, enum drbg_seed_state allows for the representation of two different DRBG seeding states: DRBG_SEED_STATE_UNSEEDED and DRBG_SEED_STATE_FULL. The former makes drbg_generate() to invoke a full reseeding operation involving both, the rather expensive jitterentropy as well as the get_random_bytes() randomness sources. The DRBG_SEED_STATE_FULL state on the other hand implies that no reseeding at all is required for a !->pr DRBG variant. Introduce the new DRBG_SEED_STATE_PARTIAL state to enum drbg_seed_state for representing the condition that a DRBG was being seeded when rng_is_initialized() had still been false. In particular, this new state implies that - the given DRBG instance has been fully seeded from the jitterentropy source (if enabled) - and drbg_generate() is supposed to reseed from get_random_bytes() *only* once rng_is_initialized() turns to true. Up to now, the __drbg_seed() helper used to set the given DRBG instance's ->seeded state to constant DRBG_SEED_STATE_FULL. Introduce a new argument allowing for the specification of the to be written ->seeded value instead. Make the first of its two callers, drbg_seed(), determine the appropriate value based on rng_is_initialized(). The remaining caller, drbg_async_seed(), is known to get invoked only once rng_is_initialized() is true, hence let it pass constant DRBG_SEED_STATE_FULL for the new argument to __drbg_seed(). There is no change in behaviour, except for that the pr_devel() in drbg_generate() would now report "unseeded" for ->pr DRBG instances which had last been seeded when rng_is_initialized() was still evaluating to false. Signed-off-by: Nicolai Stange <nstange@suse.de> Reviewed-by: Stephan Müller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
Nicolai Stange
|
ce8ce31b2c |
crypto: drbg - prepare for more fine-grained tracking of seeding state
There are two different randomness sources the DRBGs are getting seeded from, namely the jitterentropy source (if enabled) and get_random_bytes(). At initial DRBG seeding time during boot, the latter might not have collected sufficient entropy for seeding itself yet and thus, the DRBG implementation schedules a reseed work from a random_ready_callback once that has happened. This is particularly important for the !->pr DRBG instances, for which (almost) no further reseeds are getting triggered during their lifetime. Because collecting data from the jitterentropy source is a rather expensive operation, the aforementioned asynchronously scheduled reseed work restricts itself to get_random_bytes() only. That is, it in some sense amends the initial DRBG seed derived from jitterentropy output at full (estimated) entropy with fresh randomness obtained from get_random_bytes() once that has been seeded with sufficient entropy itself. With the advent of rng_is_initialized(), there is no real need for doing the reseed operation from an asynchronously scheduled work anymore and a subsequent patch will make it synchronous by moving it next to related logic already present in drbg_generate(). However, for tracking whether a full reseed including the jitterentropy source is required or a "partial" reseed involving only get_random_bytes() would be sufficient already, the boolean struct drbg_state's ->seeded member must become a tristate value. Prepare for this by introducing the new enum drbg_seed_state and change struct drbg_state's ->seeded member's type from bool to that type. For facilitating review, enum drbg_seed_state is made to only contain two members corresponding to the former ->seeded values of false and true resp. at this point: DRBG_SEED_STATE_UNSEEDED and DRBG_SEED_STATE_FULL. A third one for tracking the intermediate state of "seeded from jitterentropy only" will be introduced with a subsequent patch. There is no change in behaviour at this point. Signed-off-by: Nicolai Stange <nstange@suse.de> Reviewed-by: Stephan Müller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
Lei He
|
a9887010ed |
crypto: testmgr - Fix wrong test case of RSA
According to the BER encoding rules, integer value should be encoded as two's complement, and if the highest bit of a positive integer is 1, should add a leading zero-octet. The kernel's built-in RSA algorithm cannot recognize negative numbers when parsing keys, so it can pass this test case. Export the key to file and run the following command to verify the fix result: openssl asn1parse -inform DER -in /path/to/key/file Signed-off-by: Lei He <helei.sig11@bytedance.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
Linus Torvalds
|
c8c109546a |
Update to zstd-1.4.10
This PR includes 5 commits that update the zstd library version: 1. Adds a new kernel-style wrapper around zstd. This wrapper API is functionally equivalent to the subset of the current zstd API that is currently used. The wrapper API changes to be kernel style so that the symbols don't collide with zstd's symbols. The update to zstd-1.4.10 maintains the same API and preserves the semantics, so that none of the callers need to be updated. All callers are updated in the commit, because there are zero functional changes. 2. Adds an indirection for `lib/decompress_unzstd.c` so it doesn't depend on the layout of `lib/zstd/` to include every source file. This allows the next patch to be automatically generated. 3. Imports the zstd-1.4.10 source code. This commit is automatically generated from upstream zstd (https://github.com/facebook/zstd). 4. Adds me (terrelln@fb.com) as the maintainer of `lib/zstd`. 5. Fixes a newly added build warning for clang. The discussion around this patchset has been pretty long, so I've included a FAQ-style summary of the history of the patchset, and why we are taking this approach. Why do we need to update? ------------------------- The zstd version in the kernel is based off of zstd-1.3.1, which is was released August 20, 2017. Since then zstd has seen many bug fixes and performance improvements. And, importantly, upstream zstd is continuously fuzzed by OSS-Fuzz, and bug fixes aren't backported to older versions. So the only way to sanely get these fixes is to keep up to date with upstream zstd. There are no known security issues that affect the kernel, but we need to be able to update in case there are. And while there are no known security issues, there are relevant bug fixes. For example the problem with large kernel decompression has been fixed upstream for over 2 years https://lkml.org/lkml/2020/9/29/27. Additionally the performance improvements for kernel use cases are significant. Measured for x86_64 on my Intel i9-9900k @ 3.6 GHz: - BtrFS zstd compression at levels 1 and 3 is 5% faster - BtrFS zstd decompression+read is 15% faster - SquashFS zstd decompression+read is 15% faster - F2FS zstd compression+write at level 3 is 8% faster - F2FS zstd decompression+read is 20% faster - ZRAM decompression+read is 30% faster - Kernel zstd decompression is 35% faster - Initramfs zstd decompression+build is 5% faster On top of this, there are significant performance improvements coming down the line in the next zstd release, and the new automated update patch generation will allow us to pull them easily. How is the update patch generated? ---------------------------------- The first two patches are preparation for updating the zstd version. Then the 3rd patch in the series imports upstream zstd into the kernel. This patch is automatically generated from upstream. A script makes the necessary changes and imports it into the kernel. The changes are: - Replace all libc dependencies with kernel replacements and rewrite includes. - Remove unncessary portability macros like: #if defined(_MSC_VER). - Use the kernel xxhash instead of bundling it. This automation gets tested every commit by upstream's continuous integration. When we cut a new zstd release, we will submit a patch to the kernel to update the zstd version in the kernel. The automated process makes it easy to keep the kernel version of zstd up to date. The current zstd in the kernel shares the guts of the code, but has a lot of API and minor changes to work in the kernel. This is because at the time upstream zstd was not ready to be used in the kernel envrionment as-is. But, since then upstream zstd has evolved to support being used in the kernel as-is. Why are we updating in one big patch? ------------------------------------- The 3rd patch in the series is very large. This is because it is restructuring the code, so it both deletes the existing zstd, and re-adds the new structure. Future updates will be directly proportional to the changes in upstream zstd since the last import. They will admittidly be large, as zstd is an actively developed project, and has hundreds of commits between every release. However, there is no other great alternative. One option ruled out is to replay every upstream zstd commit. This is not feasible for several reasons: - There are over 3500 upstream commits since the zstd version in the kernel. - The automation to automatically generate the kernel update was only added recently, so older commits cannot easily be imported. - Not every upstream zstd commit builds. - Only zstd releases are "supported", and individual commits may have bugs that were fixed before a release. Another option to reduce the patch size would be to first reorganize to the new file structure, and then apply the patch. However, the current kernel zstd is formatted with clang-format to be more "kernel-like". But, the new method imports zstd as-is, without additional formatting, to allow for closer correlation with upstream, and easier debugging. So the patch wouldn't be any smaller. It also doesn't make sense to import upstream zstd commit by commit going forward. Upstream zstd doesn't support production use cases running of the development branch. We have a lot of post-commit fuzzing that catches many bugs, so indiviudal commits may be buggy, but fixed before a release. So going forward, I intend to import every (important) zstd release into the Kernel. So, while it isn't ideal, updating in one big patch is the only patch I see forward. Who is responsible for this code? --------------------------------- I am. This patchset adds me as the maintainer for zstd. Previously, there was no tree for zstd patches. Because of that, there were several patches that either got ignored, or took a long time to merge, since it wasn't clear which tree should pick them up. I'm officially stepping up as maintainer, and setting up my tree as the path through which zstd patches get merged. I'll make sure that patches to the kernel zstd get ported upstream, so they aren't erased when the next version update happens. How is this code tested? ------------------------ I tested every caller of zstd on x86_64 (BtrFS, ZRAM, SquashFS, F2FS, Kernel, InitRAMFS). I also tested Kernel & InitRAMFS on i386 and aarch64. I checked both performance and correctness. Also, thanks to many people in the community who have tested these patches locally. If you have tested the patches, please reply with a Tested-By so I can collect them for the PR I will send to Linus. Lastly, this code will bake in linux-next before being merged into v5.16. Why update to zstd-1.4.10 when zstd-1.5.0 has been released? ------------------------------------------------------------ This patchset has been outstanding since 2020, and zstd-1.4.10 was the latest release when it was created. Since the update patch is automatically generated from upstream, I could generate it from zstd-1.5.0. However, there were some large stack usage regressions in zstd-1.5.0, and are only fixed in the latest development branch. And the latest development branch contains some new code that needs to bake in the fuzzer before I would feel comfortable releasing to the kernel. Once this patchset has been merged, and we've released zstd-1.5.1, we can update the kernel to zstd-1.5.1, and exercise the update process. You may notice that zstd-1.4.10 doesn't exist upstream. This release is an artifical release based off of zstd-1.4.9, with some fixes for the kernel backported from the development branch. I will tag the zstd-1.4.10 release after this patchset is merged, so the Linux Kernel is running a known version of zstd that can be debugged upstream. Why was a wrapper API added? ---------------------------- The first versions of this patchset migrated the kernel to the upstream zstd API. It first added a shim API that supported the new upstream API with the old code, then updated callers to use the new shim API, then transitioned to the new code and deleted the shim API. However, Cristoph Hellwig suggested that we transition to a kernel style API, and hide zstd's upstream API behind that. This is because zstd's upstream API is supports many other use cases, and does not follow the kernel style guide, while the kernel API is focused on the kernel's use cases, and follows the kernel style guide. Where is the previous discussion? --------------------------------- Links for the discussions of the previous versions of the patch set. The largest changes in the design of the patchset are driven by the discussions in V11, V5, and V1. Sorry for the mix of links, I couldn't find most of the the threads on lkml.org. V12: https://www.spinics.net/lists/linux-crypto/msg58189.html V11: https://lore.kernel.org/linux-btrfs/20210430013157.747152-1-nickrterrell@gmail.com/ V10: https://lore.kernel.org/lkml/20210426234621.870684-2-nickrterrell@gmail.com/ V9: https://lore.kernel.org/linux-btrfs/20210330225112.496213-1-nickrterrell@gmail.com/ V8: https://lore.kernel.org/linux-f2fs-devel/20210326191859.1542272-1-nickrterrell@gmail.com/ V7: https://lkml.org/lkml/2020/12/3/1195 V6: https://lkml.org/lkml/2020/12/2/1245 V5: https://lore.kernel.org/linux-btrfs/20200916034307.2092020-1-nickrterrell@gmail.com/ V4: https://www.spinics.net/lists/linux-btrfs/msg105783.html V3: https://lkml.org/lkml/2020/9/23/1074 V2: https://www.spinics.net/lists/linux-btrfs/msg105505.html V1: https://lore.kernel.org/linux-btrfs/20200916034307.2092020-1-nickrterrell@gmail.com/ Signed-off-by: Nick Terrell <terrelln@fb.com> Tested By: Paul Jones <paul@pauljones.id.au> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v13.0.0 on x86-64 Tested-by: Jean-Denis Girard <jd.girard@sysnux.pf> -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEEmIwAqlFIzbQodPwyuzRpqaNEqPUFAmGJyKIACgkQuzRpqaNE qPXnmw/+PKyCn6LvRQqNfdpF5f59j/B1Fab15tkpVyz3UWnCw+EKaPZOoTfIsjRf 7TMUVm4iGsm+6xBO/YrGdRl4IxocNgXzsgnJ1lTGDbvfRC1tG+YNwuv+EEXwKYq5 Yz3DRwDotgsrV0Kg05b+VIgkmAuY3ukmu2n09LnAdKkxoIgmHw3MIDCdVZW2Br4c sjJmYI+fiJd7nAlbDa42VOrdTiLzkl/2BsjWBqTv6zbiQ5uuJGsKb7P3kpcybWzD 5C118pyE3qlVyvFz+UFu8WbN0NSf47DP22KV/3IrhNX7CVQxYBe+9/oVuPWTgRx0 4Vl0G6u7rzh4wDZuGqTC3LYWwH9GfycI0fnVC0URP2XMOcGfPlGd3L0PEmmAeTmR fEbaGAN4dr0jNO3lmbyAGe/G8tvtXQx/4ZjS9Pa3TlQP24GARU/f78/blbKR87Vz BGMndmSi92AscgXb9buO3bCwAY1YtH5WiFaZT1XVk42cj4MiOLvPTvP4UMzDDxcZ 56ahmAP/84kd6H+cv9LmgEMqcIBmxdUcO1nuAItJ4wdrMUgw3+lrbxwFkH9xPV7I okC1K0TIVEobADbxbdMylxClAylbuW+37Pko97NmAlnzNCPNE38f3s3gtXRrUTaR IP8jv5UQ7q3dFiWnNLLodx5KM6s32GVBKRLRnn/6SJB7QzlyHXU= =Xb18 -----END PGP SIGNATURE----- Merge tag 'zstd-for-linus-v5.16' of git://github.com/terrelln/linux Pull zstd update from Nick Terrell: "Update to zstd-1.4.10. Add myself as the maintainer of zstd and update the zstd version in the kernel, which is now 4 years out of date, to a much more recent zstd release. This includes bug fixes, much more extensive fuzzing, and performance improvements. And generates the kernel zstd automatically from upstream zstd, so it is easier to keep the zstd verison up to date, and we don't fall so far out of date again. This includes 5 commits that update the zstd library version: - Adds a new kernel-style wrapper around zstd. This wrapper API is functionally equivalent to the subset of the current zstd API that is currently used. The wrapper API changes to be kernel style so that the symbols don't collide with zstd's symbols. The update to zstd-1.4.10 maintains the same API and preserves the semantics, so that none of the callers need to be updated. All callers are updated in the commit, because there are zero functional changes. - Adds an indirection for `lib/decompress_unzstd.c` so it doesn't depend on the layout of `lib/zstd/` to include every source file. This allows the next patch to be automatically generated. - Imports the zstd-1.4.10 source code. This commit is automatically generated from upstream zstd (https://github.com/facebook/zstd). - Adds me (terrelln@fb.com) as the maintainer of `lib/zstd`. - Fixes a newly added build warning for clang. The discussion around this patchset has been pretty long, so I've included a FAQ-style summary of the history of the patchset, and why we are taking this approach. Why do we need to update? ------------------------- The zstd version in the kernel is based off of zstd-1.3.1, which is was released August 20, 2017. Since then zstd has seen many bug fixes and performance improvements. And, importantly, upstream zstd is continuously fuzzed by OSS-Fuzz, and bug fixes aren't backported to older versions. So the only way to sanely get these fixes is to keep up to date with upstream zstd. There are no known security issues that affect the kernel, but we need to be able to update in case there are. And while there are no known security issues, there are relevant bug fixes. For example the problem with large kernel decompression has been fixed upstream for over 2 years [1] Additionally the performance improvements for kernel use cases are significant. Measured for x86_64 on my Intel i9-9900k @ 3.6 GHz: - BtrFS zstd compression at levels 1 and 3 is 5% faster - BtrFS zstd decompression+read is 15% faster - SquashFS zstd decompression+read is 15% faster - F2FS zstd compression+write at level 3 is 8% faster - F2FS zstd decompression+read is 20% faster - ZRAM decompression+read is 30% faster - Kernel zstd decompression is 35% faster - Initramfs zstd decompression+build is 5% faster On top of this, there are significant performance improvements coming down the line in the next zstd release, and the new automated update patch generation will allow us to pull them easily. How is the update patch generated? ---------------------------------- The first two patches are preparation for updating the zstd version. Then the 3rd patch in the series imports upstream zstd into the kernel. This patch is automatically generated from upstream. A script makes the necessary changes and imports it into the kernel. The changes are: - Replace all libc dependencies with kernel replacements and rewrite includes. - Remove unncessary portability macros like: #if defined(_MSC_VER). - Use the kernel xxhash instead of bundling it. This automation gets tested every commit by upstream's continuous integration. When we cut a new zstd release, we will submit a patch to the kernel to update the zstd version in the kernel. The automated process makes it easy to keep the kernel version of zstd up to date. The current zstd in the kernel shares the guts of the code, but has a lot of API and minor changes to work in the kernel. This is because at the time upstream zstd was not ready to be used in the kernel envrionment as-is. But, since then upstream zstd has evolved to support being used in the kernel as-is. Why are we updating in one big patch? ------------------------------------- The 3rd patch in the series is very large. This is because it is restructuring the code, so it both deletes the existing zstd, and re-adds the new structure. Future updates will be directly proportional to the changes in upstream zstd since the last import. They will admittidly be large, as zstd is an actively developed project, and has hundreds of commits between every release. However, there is no other great alternative. One option ruled out is to replay every upstream zstd commit. This is not feasible for several reasons: - There are over 3500 upstream commits since the zstd version in the kernel. - The automation to automatically generate the kernel update was only added recently, so older commits cannot easily be imported. - Not every upstream zstd commit builds. - Only zstd releases are "supported", and individual commits may have bugs that were fixed before a release. Another option to reduce the patch size would be to first reorganize to the new file structure, and then apply the patch. However, the current kernel zstd is formatted with clang-format to be more "kernel-like". But, the new method imports zstd as-is, without additional formatting, to allow for closer correlation with upstream, and easier debugging. So the patch wouldn't be any smaller. It also doesn't make sense to import upstream zstd commit by commit going forward. Upstream zstd doesn't support production use cases running of the development branch. We have a lot of post-commit fuzzing that catches many bugs, so indiviudal commits may be buggy, but fixed before a release. So going forward, I intend to import every (important) zstd release into the Kernel. So, while it isn't ideal, updating in one big patch is the only patch I see forward. Who is responsible for this code? --------------------------------- I am. This patchset adds me as the maintainer for zstd. Previously, there was no tree for zstd patches. Because of that, there were several patches that either got ignored, or took a long time to merge, since it wasn't clear which tree should pick them up. I'm officially stepping up as maintainer, and setting up my tree as the path through which zstd patches get merged. I'll make sure that patches to the kernel zstd get ported upstream, so they aren't erased when the next version update happens. How is this code tested? ------------------------ I tested every caller of zstd on x86_64 (BtrFS, ZRAM, SquashFS, F2FS, Kernel, InitRAMFS). I also tested Kernel & InitRAMFS on i386 and aarch64. I checked both performance and correctness. Also, thanks to many people in the community who have tested these patches locally. Lastly, this code will bake in linux-next before being merged into v5.16. Why update to zstd-1.4.10 when zstd-1.5.0 has been released? ------------------------------------------------------------ This patchset has been outstanding since 2020, and zstd-1.4.10 was the latest release when it was created. Since the update patch is automatically generated from upstream, I could generate it from zstd-1.5.0. However, there were some large stack usage regressions in zstd-1.5.0, and are only fixed in the latest development branch. And the latest development branch contains some new code that needs to bake in the fuzzer before I would feel comfortable releasing to the kernel. Once this patchset has been merged, and we've released zstd-1.5.1, we can update the kernel to zstd-1.5.1, and exercise the update process. You may notice that zstd-1.4.10 doesn't exist upstream. This release is an artifical release based off of zstd-1.4.9, with some fixes for the kernel backported from the development branch. I will tag the zstd-1.4.10 release after this patchset is merged, so the Linux Kernel is running a known version of zstd that can be debugged upstream. Why was a wrapper API added? ---------------------------- The first versions of this patchset migrated the kernel to the upstream zstd API. It first added a shim API that supported the new upstream API with the old code, then updated callers to use the new shim API, then transitioned to the new code and deleted the shim API. However, Cristoph Hellwig suggested that we transition to a kernel style API, and hide zstd's upstream API behind that. This is because zstd's upstream API is supports many other use cases, and does not follow the kernel style guide, while the kernel API is focused on the kernel's use cases, and follows the kernel style guide. Where is the previous discussion? --------------------------------- Links for the discussions of the previous versions of the patch set below. The largest changes in the design of the patchset are driven by the discussions in v11, v5, and v1. Sorry for the mix of links, I couldn't find most of the the threads on lkml.org" Link: https://lkml.org/lkml/2020/9/29/27 [1] Link: https://www.spinics.net/lists/linux-crypto/msg58189.html [v12] Link: https://lore.kernel.org/linux-btrfs/20210430013157.747152-1-nickrterrell@gmail.com/ [v11] Link: https://lore.kernel.org/lkml/20210426234621.870684-2-nickrterrell@gmail.com/ [v10] Link: https://lore.kernel.org/linux-btrfs/20210330225112.496213-1-nickrterrell@gmail.com/ [v9] Link: https://lore.kernel.org/linux-f2fs-devel/20210326191859.1542272-1-nickrterrell@gmail.com/ [v8] Link: https://lkml.org/lkml/2020/12/3/1195 [v7] Link: https://lkml.org/lkml/2020/12/2/1245 [v6] Link: https://lore.kernel.org/linux-btrfs/20200916034307.2092020-1-nickrterrell@gmail.com/ [v5] Link: https://www.spinics.net/lists/linux-btrfs/msg105783.html [v4] Link: https://lkml.org/lkml/2020/9/23/1074 [v3] Link: https://www.spinics.net/lists/linux-btrfs/msg105505.html [v2] Link: https://lore.kernel.org/linux-btrfs/20200916034307.2092020-1-nickrterrell@gmail.com/ [v1] Signed-off-by: Nick Terrell <terrelln@fb.com> Tested By: Paul Jones <paul@pauljones.id.au> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v13.0.0 on x86-64 Tested-by: Jean-Denis Girard <jd.girard@sysnux.pf> * tag 'zstd-for-linus-v5.16' of git://github.com/terrelln/linux: lib: zstd: Add cast to silence clang's -Wbitwise-instead-of-logical MAINTAINERS: Add maintainer entry for zstd lib: zstd: Upgrade to latest upstream zstd version 1.4.10 lib: zstd: Add decompress_sources.h for decompress_unzstd lib: zstd: Add kernel-specific API |
||
Linus Torvalds
|
66f4beaa6c |
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu: "This fixes a boot crash regression" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: api - Fix boot-up crash when crypto manager is disabled |
||
Herbert Xu
|
beaaaa37c6 |
crypto: api - Fix boot-up crash when crypto manager is disabled
When the crypto manager is disabled, we need to explicitly set
the crypto algorithms' tested status so that they can be used.
Fixes:
|
||
Nick Terrell
|
cf30f6a5f0 |
lib: zstd: Add kernel-specific API
This patch: - Moves `include/linux/zstd.h` -> `include/linux/zstd_lib.h` - Updates modified zstd headers to yearless copyright - Adds a new API in `include/linux/zstd.h` that is functionally equivalent to the in-use subset of the current API. Functions are renamed to avoid symbol collisions with zstd, to make it clear it is not the upstream zstd API, and to follow the kernel style guide. - Updates all callers to use the new API. There are no functional changes in this patch. Since there are no functional change, I felt it was okay to update all the callers in a single patch. Once the API is approved, the callers are mechanically changed. This patch is preparing for the 3rd patch in this series, which updates zstd to version 1.4.10. Since the upstream zstd API is no longer exposed to callers, the update can happen transparently. Signed-off-by: Nick Terrell <terrelln@fb.com> Tested By: Paul Jones <paul@pauljones.id.au> Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v13.0.0 on x86-64 Tested-by: Jean-Denis Girard <jd.girard@sysnux.pf> |
||
Linus Torvalds
|
1e9ed9360f |
Kbuild updates for v5.16
- Remove the global -isystem compiler flag, which was made possible by the introduction of <linux/stdarg.h> - Improve the Kconfig help to print the location in the top menu level - Fix "FORCE prerequisite is missing" build warning for sparc - Add new build targets, tarzst-pkg and perf-tarzst-src-pkg, which generate a zstd-compressed tarball - Prevent gen_init_cpio tool from generating a corrupted cpio when KBUILD_BUILD_TIMESTAMP is set to 2106-02-07 or later - Misc cleanups -----BEGIN PGP SIGNATURE----- iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmGGkysVHG1hc2FoaXJv eUBrZXJuZWwub3JnAAoJED2LAQed4NsGgZkQAIX4i9Tt6pyl/2xGDGkzUqjprfoH QUIo1DoUclLUygoakrrrX3EnZLWrslgPTKjQxdiV6RA6xHfe4cYgNTSq8zM9lsPT lu+B4nEDqoXQ5gyLxMlnjS3FRQTNYIeBZEhSAIiW8TENdLKlKc+NYdoj7th50dO0 SkXRa2dpWHa6t7ZRqHIHMpUWA7gm0w22ZbgQmyUv1CDGO4IHPLqe2b2PMsrzhSZ1 yypP1l6aQVKuP0hN9aytbTRqDxUd0uOzBf00PK5zx23hjdwZ9wmZrFTKDf9fAu/+ nR7gBsa5YoYNQh3UkayZXjR5dClmgsCXZ25OXI7YucQp/8OJ5fadfn1NFpJHsw56 n5cckbHIXgnFUcel5YlkR6qTHjpzdr9vHm90MmiuX99b3oy9czl6pY3qkNfRkllQ v7ME5L1qlw3P3ia1KA+H4zW/LIJ8p5cbKBwaY22m3kY3bTx7PiOfMlep4UVqxXSb 0/OqxSsmYg5LlmwEQ0SSsx45hE0o9nG/cdjkHu1jUOUHxYfpt1T4MTILeGUwmjzd TydJym5MZyXBawu4NVB3QLoKm5Jt2BXtyaWOtq74VSrs77roNCdYuQWJ+1aBf2Pg 0s4CVC2cC7KlxJDImoqswZATGXPMfbiVDcuVSSukYRgBMeCBPUzRhB8YP36BZyD3 9vFYmqSujtUU7nWb =ATFN -----END PGP SIGNATURE----- Merge tag 'kbuild-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Remove the global -isystem compiler flag, which was made possible by the introduction of <linux/stdarg.h> - Improve the Kconfig help to print the location in the top menu level - Fix "FORCE prerequisite is missing" build warning for sparc - Add new build targets, tarzst-pkg and perf-tarzst-src-pkg, which generate a zstd-compressed tarball - Prevent gen_init_cpio tool from generating a corrupted cpio when KBUILD_BUILD_TIMESTAMP is set to 2106-02-07 or later - Misc cleanups * tag 'kbuild-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (28 commits) kbuild: use more subdir- for visiting subdirectories while cleaning sh: remove meaningless archclean line initramfs: Check timestamp to prevent broken cpio archive kbuild: split DEBUG_CFLAGS out to scripts/Makefile.debug gen_init_cpio: add static const qualifiers kbuild: Add make tarzst-pkg build option scripts: update the comments of kallsyms support sparc: Add missing "FORCE" target when using if_changed kconfig: refactor conf_touch_dep() kconfig: refactor conf_write_dep() kconfig: refactor conf_write_autoconf() kconfig: add conf_get_autoheader_name() kconfig: move sym_escape_string_value() to confdata.c kconfig: refactor listnewconfig code kconfig: refactor conf_write_symbol() kconfig: refactor conf_write_heading() kconfig: remove 'const' from the return type of sym_escape_string_value() kconfig: rename a variable in the lexer to a clearer name kconfig: narrow the scope of variables in the lexer kconfig: Create links to main menu items in search ... |
||
Linus Torvalds
|
bfc484fe6a |
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu: "API: - Delay boot-up self-test for built-in algorithms Algorithms: - Remove fallback path on arm64 as SIMD now runs with softirq off Drivers: - Add Keem Bay OCS ECC Driver" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (61 commits) crypto: testmgr - fix wrong key length for pkcs1pad crypto: pcrypt - Delay write to padata->info crypto: ccp - Make use of the helper macro kthread_run() crypto: sa2ul - Use the defined variable to clean code crypto: s5p-sss - Add error handling in s5p_aes_probe() crypto: keembay-ocs-ecc - Add Keem Bay OCS ECC Driver dt-bindings: crypto: Add Keem Bay ECC bindings crypto: ecc - Export additional helper functions crypto: ecc - Move ecc.h to include/crypto/internal crypto: engine - Add KPP Support to Crypto Engine crypto: api - Do not create test larvals if manager is disabled crypto: tcrypt - fix skcipher multi-buffer tests for 1420B blocks hwrng: s390 - replace snprintf in show functions with sysfs_emit crypto: octeontx2 - set assoclen in aead_do_fallback() crypto: ccp - Fix whitespace in sev_cmd_buffer_len() hwrng: mtk - Force runtime pm ops for sleep ops crypto: testmgr - Only disable migration in crypto_disable_simd_for_test() crypto: qat - share adf_enable_pf2vf_comms() from adf_pf2vf_msg.c crypto: qat - extract send and wait from adf_vf2pf_request_version() crypto: qat - add VF and PF wrappers to common send function ... |
||
Lei He
|
39ef085170 |
crypto: testmgr - fix wrong key length for pkcs1pad
Fix wrong test data at testmgr.h, it seems to be caused by ignoring the last '\0' when calling sizeof. Signed-off-by: Lei He <helei.sig11@bytedance.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
Daniel Jordan
|
68b6dea802 |
crypto: pcrypt - Delay write to padata->info
These three events can race when pcrypt is used multiple times in a
template ("pcrypt(pcrypt(...))"):
1. [taskA] The caller makes the crypto request via crypto_aead_encrypt()
2. [kworkerB] padata serializes the inner pcrypt request
3. [kworkerC] padata serializes the outer pcrypt request
3 might finish before the call to crypto_aead_encrypt() returns in 1,
resulting in two possible issues.
First, a use-after-free of the crypto request's memory when, for
example, taskA writes to the outer pcrypt request's padata->info in
pcrypt_aead_enc() after kworkerC completes the request.
Second, the outer pcrypt request overwrites the inner pcrypt request's
return code with -EINPROGRESS, making a successful request appear to
fail. For instance, kworkerB writes the outer pcrypt request's
padata->info in pcrypt_aead_done() and then taskA overwrites it
in pcrypt_aead_enc().
Avoid both situations by delaying the write of padata->info until after
the inner crypto request's return code is checked. This prevents the
use-after-free by not touching the crypto request's memory after the
next-inner crypto request is made, and stops padata->info from being
overwritten.
Fixes:
|
||
Daniele Alessandrelli
|
eaffe377e1 |
crypto: ecc - Export additional helper functions
Export the following additional ECC helper functions: - ecc_alloc_point() - ecc_free_point() - vli_num_bits() - ecc_point_is_zero() This is done to allow future ECC device drivers to re-use existing code, thus simplifying their implementation. Functions are exported using EXPORT_SYMBOL() (instead of EXPORT_SYMBOL_GPL()) to be consistent with the functions already exported by crypto/ecc.c. Exported functions are documented in include/crypto/internal/ecc.h. Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
Daniele Alessandrelli
|
a745d3ace3 |
crypto: ecc - Move ecc.h to include/crypto/internal
Move ecc.h header file to 'include/crypto/internal' so that it can be easily imported from everywhere in the kernel tree. This change is done to allow crypto device drivers to re-use the symbols exported by 'crypto/ecc.c', thus avoiding code duplication. Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
Prabhjot Khurana
|
1730c5aa3b |
crypto: engine - Add KPP Support to Crypto Engine
Add KPP support to the crypto engine queue manager, so that it can be used to simplify the logic of KPP device drivers as done for other crypto drivers. Signed-off-by: Prabhjot Khurana <prabhjot.khurana@intel.com> Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
Herbert Xu
|
cad439fc04 |
crypto: api - Do not create test larvals if manager is disabled
The delayed boot-time testing patch created a dependency loop
between api.c and algapi.c because it added a crypto_alg_tested
call to the former when the crypto manager is disabled.
We could instead avoid creating the test larvals if the crypto
manager is disabled. This avoids the dependency loop as well
as saving some unnecessary work, albeit in a very unlikely case.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: kernel test robot <lkp@intel.com>
Fixes:
|
||
Jens Axboe
|
6b19b766e8 |
fs: get rid of the res2 iocb->ki_complete argument
The second argument was only used by the USB gadget code, yet everyone pays the overhead of passing a zero to be passed into aio, where it ends up being part of the aio res2 value. Now that everybody is passing in zero, kill off the extra argument. Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
Horia Geantă
|
3ae88f676a |
crypto: tcrypt - fix skcipher multi-buffer tests for 1420B blocks
Commit |
||
Sebastian Andrzej Siewior
|
82e269ad8a |
crypto: testmgr - Only disable migration in crypto_disable_simd_for_test()
crypto_disable_simd_for_test() disables preemption in order to receive a stable per-CPU variable which it needs to modify in order to alter crypto_simd_usable() results. This can also be achived by migrate_disable() which forbidds CPU migrations but allows the task to be preempted. The latter is important for PREEMPT_RT since operation like skcipher_walk_first() may allocate memory which must not happen with disabled preemption on PREEMPT_RT. Use migrate_disable() in crypto_disable_simd_for_test() to achieve a stable per-CPU pointer. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
Herbert Xu
|
e42dff467e |
crypto: api - Export crypto_boot_test_finished
We need to export crypto_boot_test_finished in case api.c is
built-in while algapi.c is built as a module.
Fixes:
|
||
Arnd Bergmann
|
38aa192a05 |
crypto: ecc - fix CRYPTO_DEFAULT_RNG dependency
The ecc.c file started out as part of the ECDH algorithm but got moved out into a standalone module later. It does not build without CRYPTO_DEFAULT_RNG, so now that other modules are using it as well we can run into this link error: aarch64-linux-ld: ecc.c:(.text+0xfc8): undefined reference to `crypto_default_rng' aarch64-linux-ld: ecc.c:(.text+0xff4): undefined reference to `crypto_put_default_rng' Move the 'select CRYPTO_DEFAULT_RNG' statement into the correct symbol. Fixes: |
||
Herbert Xu
|
adad556efc |
crypto: api - Fix built-in testing dependency failures
When complex algorithms that depend on other algorithms are built into the kernel, the order of registration must be done such that the underlying algorithms are ready before the ones on top are registered. As otherwise they would fail during the self-test which is required during registration. In the past we have used subsystem initialisation ordering to guarantee this. The number of such precedence levels are limited and they may cause ripple effects in other subsystems. This patch solves this problem by delaying all self-tests during boot-up for built-in algorithms. They will be tested either when something else in the kernel requests for them, or when we have finished registering all built-in algorithms, whichever comes earlier. Reported-by: Vladis Dronov <vdronov@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
Alexey Dobriyan
|
04e85bbf71 |
isystem: delete global -isystem compile option
Further isolate kernel from userspace, prevent accidental inclusion of undesireable headers, mainly float.h and stdatomic.h. nds32 keeps -isystem globally due to intrinsics used in entrenched header. -isystem is selectively reenabled for some files, again, for intrinsics. Compile tested on: hexagon-defconfig hexagon-allmodconfig alpha-allmodconfig alpha-allnoconfig alpha-defconfig arm64-allmodconfig arm64-allnoconfig arm64-defconfig arm-am200epdkit arm-aspeed_g4 arm-aspeed_g5 arm-assabet arm-at91_dt arm-axm55xx arm-badge4 arm-bcm2835 arm-cerfcube arm-clps711x arm-cm_x300 arm-cns3420vb arm-colibri_pxa270 arm-colibri_pxa300 arm-collie arm-corgi arm-davinci_all arm-dove arm-ep93xx arm-eseries_pxa arm-exynos arm-ezx arm-footbridge arm-gemini arm-h3600 arm-h5000 arm-hackkit arm-hisi arm-imote2 arm-imx_v4_v5 arm-imx_v6_v7 arm-integrator arm-iop32x arm-ixp4xx arm-jornada720 arm-keystone arm-lart arm-lpc18xx arm-lpc32xx arm-lpd270 arm-lubbock arm-magician arm-mainstone arm-milbeaut_m10v arm-mini2440 arm-mmp2 arm-moxart arm-mps2 arm-multi_v4t arm-multi_v5 arm-multi_v7 arm-mv78xx0 arm-mvebu_v5 arm-mvebu_v7 arm-mxs arm-neponset arm-netwinder arm-nhk8815 arm-omap1 arm-omap2plus arm-orion5x arm-oxnas_v6 arm-palmz72 arm-pcm027 arm-pleb arm-pxa arm-pxa168 arm-pxa255-idp arm-pxa3xx arm-pxa910 arm-qcom arm-realview arm-rpc arm-s3c2410 arm-s3c6400 arm-s5pv210 arm-sama5 arm-shannon arm-shmobile arm-simpad arm-socfpga arm-spear13xx arm-spear3xx arm-spear6xx arm-spitz arm-stm32 arm-sunxi arm-tct_hammer arm-tegra arm-trizeps4 arm-u8500 arm-versatile arm-vexpress arm-vf610m4 arm-viper arm-vt8500_v6_v7 arm-xcep arm-zeus csky-allmodconfig csky-allnoconfig csky-defconfig h8300-edosk2674 h8300-h8300h-sim h8300-h8s-sim i386-allmodconfig i386-allnoconfig i386-defconfig ia64-allmodconfig ia64-allnoconfig ia64-bigsur ia64-generic ia64-gensparse ia64-tiger ia64-zx1 m68k-amcore m68k-amiga m68k-apollo m68k-atari m68k-bvme6000 m68k-hp300 m68k-m5208evb m68k-m5249evb m68k-m5272c3 m68k-m5275evb m68k-m5307c3 m68k-m5407c3 m68k-m5475evb m68k-mac m68k-multi m68k-mvme147 m68k-mvme16x m68k-q40 m68k-stmark2 m68k-sun3 m68k-sun3x microblaze-allmodconfig microblaze-allnoconfig microblaze-mmu mips-ar7 mips-ath25 mips-ath79 mips-bcm47xx mips-bcm63xx mips-bigsur mips-bmips_be mips-bmips_stb mips-capcella mips-cavium_octeon mips-ci20 mips-cobalt mips-cu1000-neo mips-cu1830-neo mips-db1xxx mips-decstation mips-decstation_64 mips-decstation_r4k mips-e55 mips-fuloong2e mips-gcw0 mips-generic mips-gpr mips-ip22 mips-ip27 mips-ip28 mips-ip32 mips-jazz mips-jmr3927 mips-lemote2f mips-loongson1b mips-loongson1c mips-loongson2k mips-loongson3 mips-malta mips-maltaaprp mips-malta_kvm mips-malta_qemu_32r6 mips-maltasmvp mips-maltasmvp_eva mips-maltaup mips-maltaup_xpa mips-mpc30x mips-mtx1 mips-nlm_xlp mips-nlm_xlr mips-omega2p mips-pic32mzda mips-pistachio mips-qi_lb60 mips-rb532 mips-rbtx49xx mips-rm200 mips-rs90 mips-rt305x mips-sb1250_swarm mips-tb0219 mips-tb0226 mips-tb0287 mips-vocore2 mips-workpad mips-xway nds32-allmodconfig nds32-allnoconfig nds32-defconfig nios2-10m50 nios2-3c120 nios2-allmodconfig nios2-allnoconfig openrisc-allmodconfig openrisc-allnoconfig openrisc-or1klitex openrisc-or1ksim openrisc-simple_smp parisc-allnoconfig parisc-generic-32bit parisc-generic-64bit powerpc-acadia powerpc-adder875 powerpc-akebono powerpc-amigaone powerpc-arches powerpc-asp8347 powerpc-bamboo powerpc-bluestone powerpc-canyonlands powerpc-cell powerpc-chrp32 powerpc-cm5200 powerpc-currituck powerpc-ebony powerpc-eiger powerpc-ep8248e powerpc-ep88xc powerpc-fsp2 powerpc-g5 powerpc-gamecube powerpc-ge_imp3a powerpc-holly powerpc-icon powerpc-iss476-smp powerpc-katmai powerpc-kilauea powerpc-klondike powerpc-kmeter1 powerpc-ksi8560 powerpc-linkstation powerpc-lite5200b powerpc-makalu powerpc-maple powerpc-mgcoge powerpc-microwatt powerpc-motionpro powerpc-mpc512x powerpc-mpc5200 powerpc-mpc7448_hpc2 powerpc-mpc8272_ads powerpc-mpc8313_rdb powerpc-mpc8315_rdb powerpc-mpc832x_mds powerpc-mpc832x_rdb powerpc-mpc834x_itx powerpc-mpc834x_itxgp powerpc-mpc834x_mds powerpc-mpc836x_mds powerpc-mpc836x_rdk powerpc-mpc837x_mds powerpc-mpc837x_rdb powerpc-mpc83xx powerpc-mpc8540_ads powerpc-mpc8560_ads powerpc-mpc85xx_cds powerpc-mpc866_ads powerpc-mpc885_ads powerpc-mvme5100 powerpc-obs600 powerpc-pasemi powerpc-pcm030 powerpc-pmac32 powerpc-powernv powerpc-ppa8548 powerpc-ppc40x powerpc-ppc44x powerpc-ppc64 powerpc-ppc64e powerpc-ppc6xx powerpc-pq2fads powerpc-ps3 powerpc-pseries powerpc-rainier powerpc-redwood powerpc-sam440ep powerpc-sbc8548 powerpc-sequoia powerpc-skiroot powerpc-socrates powerpc-storcenter powerpc-stx_gp3 powerpc-taishan powerpc-tqm5200 powerpc-tqm8540 powerpc-tqm8541 powerpc-tqm8548 powerpc-tqm8555 powerpc-tqm8560 powerpc-tqm8xx powerpc-walnut powerpc-warp powerpc-wii powerpc-xes_mpc85xx riscv-allmodconfig riscv-allnoconfig riscv-nommu_k210 riscv-nommu_k210_sdcard riscv-nommu_virt riscv-rv32 s390-allmodconfig s390-allnoconfig s390-debug s390-zfcpdump sh-ap325rxa sh-apsh4a3a sh-apsh4ad0a sh-dreamcast sh-ecovec24 sh-ecovec24-romimage sh-edosk7705 sh-edosk7760 sh-espt sh-hp6xx sh-j2 sh-kfr2r09 sh-kfr2r09-romimage sh-landisk sh-lboxre2 sh-magicpanelr2 sh-microdev sh-migor sh-polaris sh-r7780mp sh-r7785rp sh-rsk7201 sh-rsk7203 sh-rsk7264 sh-rsk7269 sh-rts7751r2d1 sh-rts7751r2dplus sh-sdk7780 sh-sdk7786 sh-se7206 sh-se7343 sh-se7619 sh-se7705 sh-se7712 sh-se7721 sh-se7722 sh-se7724 sh-se7750 sh-se7751 sh-se7780 sh-secureedge5410 sh-sh03 sh-sh2007 sh-sh7710voipgw sh-sh7724_generic sh-sh7757lcr sh-sh7763rdp sh-sh7770_generic sh-sh7785lcr sh-sh7785lcr_32bit sh-shmin sh-shx3 sh-titan sh-ul2 sh-urquell sparc-allmodconfig sparc-allnoconfig sparc-sparc32 sparc-sparc64 um-i386-allmodconfig um-i386-allnoconfig um-i386-defconfig um-x86_64-allmodconfig um-x86_64-allnoconfig x86_64-allmodconfig x86_64-allnoconfig x86_64-defconfig xtensa-allmodconfig xtensa-allnoconfig xtensa-audio_kc705 xtensa-cadence_csp xtensa-common xtensa-generic_kc705 xtensa-iss xtensa-nommu_kc705 xtensa-smp_lx200 xtensa-virt xtensa-xip_kc705 Tested-by: Nathan Chancellor <nathan@kernel.org> # build (hexagon) Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> |
||
Tim Gardner
|
81f53028df |
crypto: drbg - Fix unused value warning in drbg_healthcheck_sanity()
Coverity warns uf an unused value: CID 44865 (#2 of 2): Unused value (UNUSED_VALUE) assigned_value: Assigning value -14 to ret here, but that stored value is overwritten before it can be used. 2006 int ret = -EFAULT; ... value_overwrite: Overwriting previous write to ret with value from drbg_seed(drbg, &addtl, false). 2052 ret = drbg_seed(drbg, &addtl, false); Fix this by removing the variable initializer. Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-crypto@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |