When we're estimating a new speculative preallocation length for an
extending write, we should walk backwards through the extent list to
determine the number of number of blocks that are physically and
logically contiguous with the write offset, and use that as an input to
the preallocation size computation.
This way, preallocation length is truly measured by the effectiveness of
the allocator in giving us contiguous allocations without being
influenced by the state of a given extent. This fixes both the problem
where ZERO_RANGE within an EOF can reduce preallocation, and prevents
the unnecessary shrinkage of preallocation when delalloc extents are
turned into unwritten extents.
This was found as a regression in xfs/014 after changing delalloc writes
to create unwritten extents during writeback.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
During writeback, it's possible for the quota block reservation in
xfs_iomap_write_unwritten to fail with EDQUOT because we hit the quota
limit. This causes writeback errors for data that was already written
to disk, when it's not even guaranteed that the bmbt will expand to
exceed the quota limit. Irritatingly, this condition is reported to
userspace as EIO by fsync, which is confusing.
We wrote the data, so allow the reservation. That might put us slightly
above the hard limit, but it's better than losing data after a write.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The perag structure already has a pointer to the xfs_mount, so we don't
need to pass that separately and can drop it. Having done that, move
iter_flags so that the argument order is the same between xfs_inode_walk
and xfs_inode_walk_ag. The latter will make things less confusing for a
future patch that enables background scanning work to be done in
parallel.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
We're not very consistent about function names for the incore inode
iteration function. Turn them all into xfs_inode_walk* variants.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the xfs_inode_ag_iterator function to be nearer xfs_inode_ag_walk
so that we don't have to scroll back and forth to figure out how the
incore inode walking function works. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
This is a boolean variable, so use the bool type.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
There are a number of predicate functions that help the incore inode
walking code decide if we really want to apply the iteration function to
the inode. These are boolean decisions, so change the return types to
boolean to match.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Refactor the two eofb-matching logics into a single helper so that we
don't repeat ourselves.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
This is now a pointless wrapper, so kill it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
The incore inode walk code passes a flags argument and a pointer from
the xfs_inode_ag_iterator caller all the way to the iteration function.
We can reduce the function complexity by passing flags through the
private pointer.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Combine xfs_inode_ag_iterator_flags and xfs_inode_ag_iterator_tag into a
single wrapper function since there's only one caller of the _flags
variant.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Not used by anyone, so get rid of it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Use XFS_ICI_NO_TAG instead of -1 when appropriate.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Move xfs_fs_eofblocks_from_user into the only file that actually uses
it, so that we don't have this function cluttering up the header file.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
The only grace period which can be set in the kernel today is for id 0,
i.e. the default grace period for all users. However, setting an
individual grace period is useful; for example:
Alice has a soft quota of 100 inodes, and a hard quota of 200 inodes
Alice uses 150 inodes, and enters a short grace period
Alice really needs to use those 150 inodes past the grace period
The administrator extends Alice's grace period until next Monday
vfs quota users such as ext4 can do this today, with setquota -T
To enable this for XFS, we simply move the timelimit assignment out
from under the (id == 0) test. Default setting remains under (id == 0).
Note that this now is consistent with how we set warnings.
(Userspace requires updates to enable this as well; xfs_quota needs to
parse new options, and setquota needs to set appropriate field flags.)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Move timers and warnings out of xfs_quotainfo and into xfs_def_quota
so that we can utilize them on a per-type basis, rather than enforcing
them based on the values found in the first enabled quota type.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
[zlang: new way to get defquota in xfs_qm_init_timelimits]
[zlang: remove redundant defq assign]
Signed-off-by: Zorro Lang <zlang@redhat.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_get_defquota() currently takes an xfs_dquot, and from that obtains
the type of default quota we should get (user/group/project).
But early in init, we don't have access to a fully set up quota, so
that's not possible. The next patch needs go set up default quota
timers early, so switch xfs_get_defquota to take an explicit type
and add a helper function to obtain that type from an xfs_dquot
for the existing callers.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Pass xfs_dquot rather than xfs_disk_dquot to xfs_qm_adjust_dqtimers;
this makes it symmetric with xfs_qm_adjust_dqlimits and will help
the next patch.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There is a fair bit of whitespace damage in the quota code, so
fix up enough of it that subsequent patches are restricted to
functional change to aid review.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
XFS project quota treats project hierarchies as "mini filesysems" and
so rather than -EDQUOT, the intent is to return -ENOSPC when a quota
reservation fails, but this behavior is not consistent.
The only place we make a decision between -EDQUOT and -ENOSPC
returns based on quota type is in xfs_trans_dqresv().
This behavior is currently controlled by whether or not the
XFS_QMOPT_ENOSPC flag gets passed into the quota reservation. However,
its use is not consistent; paths such as xfs_create() and xfs_symlink()
don't set the flag, so a reservation failure will return -EDQUOT for
project quota reservation failures rather than -ENOSPC for these sorts
of operations, even for project quota:
# mkdir mnt/project
# xfs_quota -x -c "project -s -p mnt/project 42" mnt
# xfs_quota -x -c 'limit -p isoft=2 ihard=3 42' mnt
# touch mnt/project/file{1,2,3}
touch: cannot touch ‘mnt/project/file3’: Disk quota exceeded
We can make this consistent by not requiring the flag to be set at the
top of the callchain; instead we can simply test whether we are
reserving a project quota with XFS_QM_ISPDQ in xfs_trans_dqresv and if
so, return -ENOSPC for that failure. This removes the need for the
XFS_QMOPT_ENOSPC altogether and simplifies the code a fair bit.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Long ago, group & project quota were mutually exclusive, and so
when we turned on XFS_QMOPT_ENOSPC ("return ENOSPC if project quota
is exceeded") when project quota was enabled, we only needed to
disable it again for user quota.
When group & project quota got separated, this got missed, and as a
result if project quota is enabled and group quota is exceeded, the
error code returned is incorrectly returned as ENOSPC not EDQUOT.
Fix this by stripping XFS_QMOPT_ENOSPC out of flags for group
quota when we try to reserve the space.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
It's a global atomic counter, and we are hitting it at a rate of
half a million transactions a second, so it's bouncing the counter
cacheline all over the place on large machines. We don't actually
need it anymore - it used to be required because the VFS freeze code
could not track/prevent filesystem transactions that were running,
but that problem no longer exists.
Hence to remove the counter, we simply have to ensure that nothing
calls xfs_sync_sb() while we are trying to quiesce the filesytem.
That only happens if the log worker is still running when we call
xfs_quiesce_attr(). The log worker is cancelled at the end of
xfs_quiesce_attr() by calling xfs_log_quiesce(), so just call it
early here and then we can remove the counter altogether.
Concurrent create, 50 million inodes, identical 16p/16GB virtual
machines on different physical hosts. Machine A has twice the CPU
cores per socket of machine B:
unpatched patched
machine A: 3m16s 2m00s
machine B: 4m04s 4m05s
Create rates:
unpatched patched
machine A: 282k+/-31k 468k+/-21k
machine B: 231k+/-8k 233k+/-11k
Concurrent rm of same 50 million inodes:
unpatched patched
machine A: 6m42s 2m33s
machine B: 4m47s 4m47s
The transaction rate on the fast machine went from just under
300k/sec to 700k/sec, which indicates just how much of a bottleneck
this atomic counter was.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Seeing massive cpu usage from xfs_agino_range() on one machine;
instruction level profiles look similar to another machine running
the same workload, only one machine is consuming 10x as much CPU as
the other and going much slower. The only real difference between
the two machines is core count per socket. Both are running
identical 16p/16GB virtual machine configurations
Machine A:
25.83% [k] xfs_agino_range
12.68% [k] __xfs_dir3_data_check
6.95% [k] xfs_verify_ino
6.78% [k] xfs_dir2_data_entry_tag_p
3.56% [k] xfs_buf_find
2.31% [k] xfs_verify_dir_ino
2.02% [k] xfs_dabuf_map.constprop.0
1.65% [k] xfs_ag_block_count
And takes around 13 minutes to remove 50 million inodes.
Machine B:
13.90% [k] __pv_queued_spin_lock_slowpath
3.76% [k] do_raw_spin_lock
2.83% [k] xfs_dir3_leaf_check_int
2.75% [k] xfs_agino_range
2.51% [k] __raw_callee_save___pv_queued_spin_unlock
2.18% [k] __xfs_dir3_data_check
2.02% [k] xfs_log_commit_cil
And takes around 5m30s to remove 50 million inodes.
Suspect is cacheline contention on m_sectbb_log which is used in one
of the macros in xfs_agino_range. This is a read-only variable but
shares a cacheline with m_active_trans which is a global atomic that
gets bounced all around the machine.
The workload is trying to run hundreds of thousands of transactions
per second and hence cacheline contention will be occurring on this
atomic counter. Hence xfs_agino_range() is likely just be an
innocent bystander as the cache coherency protocol fights over the
cacheline between CPU cores and sockets.
On machine A, this rearrangement of the struct xfs_mount
results in the profile changing to:
9.77% [kernel] [k] xfs_agino_range
6.27% [kernel] [k] __xfs_dir3_data_check
5.31% [kernel] [k] __pv_queued_spin_lock_slowpath
4.54% [kernel] [k] xfs_buf_find
3.79% [kernel] [k] do_raw_spin_lock
3.39% [kernel] [k] xfs_verify_ino
2.73% [kernel] [k] __raw_callee_save___pv_queued_spin_unlock
Vastly less CPU usage in xfs_agino_range(), but still 3x the amount
of machine B and still runs substantially slower than it should.
Current rm -rf of 50 million files:
vanilla patched
machine A 13m20s 6m42s
machine B 5m30s 5m02s
It's an improvement, hence indicating that separation and further
optimisation of read-only global filesystem data is worthwhile, but
it clearly isn't the underlying issue causing this specific
performance degradation.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Shaokun Zhang reported that XFS was using substantial CPU time in
percpu_count_sum() when running a single threaded benchmark on
a high CPU count (128p) machine from xfs_mod_ifree(). The issue
is that the filesystem is empty when the benchmark runs, so inode
allocation is running with a very low inode free count.
With the percpu counter batching, this means comparisons when the
counter is less that 128 * 256 = 32768 use the slow path of adding
up all the counters across the CPUs, and this is expensive on high
CPU count machines.
The summing in xfs_mod_ifree() is only used to fire an assert if an
underrun occurs. The error is ignored by the higher level code.
Hence this is really just debug code and we don't need to run it
on production kernels, nor do we need such debug checks to return
error values just to trigger an assert.
Finally, xfs_mod_icount/xfs_mod_ifree are only called from
xfs_trans_unreserve_and_mod_sb(), so get rid of them and just
directly call the percpu_counter_add/percpu_counter_compare
functions. The compare functions are now run only on debug builds as
they are internal to ASSERT() checks and so only compiled in when
ASSERTs are active (CONFIG_XFS_DEBUG=y or CONFIG_XFS_WARN=y).
Reported-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs: gut error handling in xfs_trans_unreserve_and_mod_sb()
From: Dave Chinner <dchinner@redhat.com>
The error handling in xfs_trans_unreserve_and_mod_sb() is largely
incorrect - rolling back the changes in the transaction if only one
counter underruns makes all the other counters incorrect. We still
allow the change to proceed and committing the transaction, except
now we have multiple incorrect counters instead of a single
underflow.
Further, we don't actually report the error to the caller, so this
is completely silent except on debug kernels that will assert on
failure before we even get to the rollback code. Hence this error
handling is broken, untested, and largely unnecessary complexity.
Just remove it.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The argument isn't used by any caller, and drivers don't fill out
bi_sector for flush requests either.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move freeing the dynamically allocated attr and COW fork, as well
as zeroing the pointers where actually needed into the callers, and
just pass the xfs_ifork structure to xfs_idestroy_fork. Also simplify
the kmem_free calls by not checking for NULL first.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Both the data and attr fork have a format that is stored in the legacy
idinode. Move it into the xfs_ifork structure instead, where it uses
up padding.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There are there are three extents counters per inode, one for each of
the forks. Two are in the legacy icdinode and one is directly in
struct xfs_inode. Switch to a single counter in the xfs_ifork structure
where it uses up padding at the end of the structure. This simplifies
various bits of code that just wants the number of extents counter and
can now directly dereference it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_ifree only need to free inline data in the data fork, as we've
already taken care of the attr fork before (and in fact freed the
fork structure). Just open code the freeing of the inline data.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Just checking di_forkoff directly is a little easier to follow.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
XFS_IFORK_Q is supposed to be a predicate, not a function returning a
value. Its usage is in xchk_bmap_check_rmaps is incorrect, but that
function only cares about whether or not the "size" of the data is zero
or not. Convert that logic to use a proper boolean, and teach the
caller to skip the call entirely if the end result would be that we'd do
nothing anyway. This avoids a crash later in this series.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[hch: generalized the NULL ifor check]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Now that we fully verify the inode forks before they are added to the
inode cache, the crash reported in
https://bugzilla.kernel.org/show_bug.cgi?id=204031
can't happen anymore, as we'll never let an inode that has inconsistent
nextents counts vs the presence of an in-core attr fork leak into the
inactivate code path. So remove the work around to try to handle the
case, and just return an error and warn if the fork is not present.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We don't call xfs_bmapi_read for the COW fork anymore, so remove the
special casing.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Call the data/attr local fork verifiers as soon as we are ready for them.
This keeps them close to the code setting up the forks, and avoids a
few branches later on. Also open code xfs_inode_verify_forks in the
only remaining caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The split between xfs_inode_verify_forks and the two helpers
implementing the actual functionality is a little strange. Reshuffle
it so that xfs_inode_verify_forks verifies if the data and attr forks
are actually in local format and only call the low-level helpers if
that is the case. Handle the actual error reporting in the low-level
handlers to streamline the caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_ifork_ops add up to two indirect calls per inode read and flush,
despite just having a single instance in the kernel. In xfsprogs
phase6 in xfs_repair overrides the verify_dir method to deal with inodes
that do not have a valid parent, but that can be fixed pretty easily
by ensuring they always have a valid looking parent.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There is not much point in the xfs_iread function, as it has a single
caller and not a whole lot of code. Move it into the only caller,
and trim down the overdocumentation to just documenting the important
"why" instead of a lot of redundant "what".
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
i_delayed_blks is set to 0 in xfs_inode_alloc and can't have anything
assigned to it until the inode is visible to the VFS.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Keep the code dealing with the dinode together, and also ensure we verify
the dinode in the owner change log recovery case as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Handle inodes with a 0 di_mode in xfs_inode_from_disk, instead of partially
duplicating inode reading in xfs_iread.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_iformat_fork is a weird catchall. Split it into one helper for
the data fork and one for the attr fork, and then call both helper
as well as the COW fork initialization from xfs_inode_from_disk. Order
the COW fork initialization after the attr fork initialization given
that it can't fail to simplify the error handling.
Note that the newly split helpers are moved down the file in
xfs_inode_fork.c to avoid the need for forward declarations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We always need to fill out the fork structures when reading the inode,
so call xfs_iformat_fork from the tail of xfs_inode_from_disk.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The last argument to xfs_bmapi_raad contains XFS_BMAPI_* flags, not the
fork. Given that XFS_DATA_FORK evaluates to 0 no real harm is done,
but let's fix this anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Fix this error message to complain about project and group quota flag
bits instead of "PUOTA" and "QUOTA".
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Since the old SWAPEXT ioctl doesn't know how to adjust quota ids,
bail out of the ids don't match and quotas are enabled.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
While QAing the new xfs_repair quotacheck code, I uncovered a quota
corruption bug resulting from a bad interaction between dquot buffer
initialization and quotacheck. The bug can be reproduced with the
following sequence:
# mkfs.xfs -f /dev/sdf
# mount /dev/sdf /opt -o usrquota
# su nobody -s /bin/bash -c 'touch /opt/barf'
# sync
# xfs_quota -x -c 'report -ahi' /opt
User quota on /opt (/dev/sdf)
Inodes
User ID Used Soft Hard Warn/Grace
---------- ---------------------------------
root 3 0 0 00 [------]
nobody 1 0 0 00 [------]
# xfs_io -x -c 'shutdown' /opt
# umount /opt
# mount /dev/sdf /opt -o usrquota
# touch /opt/man2
# xfs_quota -x -c 'report -ahi' /opt
User quota on /opt (/dev/sdf)
Inodes
User ID Used Soft Hard Warn/Grace
---------- ---------------------------------
root 1 0 0 00 [------]
nobody 1 0 0 00 [------]
# umount /opt
Notice how the initial quotacheck set the root dquot icount to 3
(rootino, rbmino, rsumino), but after shutdown -> remount -> recovery,
xfs_quota reports that the root dquot has only 1 icount. We haven't
deleted anything from the filesystem, which means that quota is now
under-counting. This behavior is not limited to icount or the root
dquot, but this is the shortest reproducer.
I traced the cause of this discrepancy to the way that we handle ondisk
dquot updates during quotacheck vs. regular fs activity. Normally, when
we allocate a disk block for a dquot, we log the buffer as a regular
(dquot) buffer. Subsequent updates to the dquots backed by that block
are done via separate dquot log item updates, which means that they
depend on the logged buffer update being written to disk before the
dquot items. Because individual dquots have their own LSN fields, that
initial dquot buffer must always be recovered.
However, the story changes for quotacheck, which can cause dquot block
allocations but persists the final dquot counter values via a delwri
list. Because recovery doesn't gate dquot buffer replay on an LSN, this
means that the initial dquot buffer can be replayed over the (newer)
contents that were delwritten at the end of quotacheck. In effect, this
re-initializes the dquot counters after they've been updated. If the
log does not contain any other dquot items to recover, the obsolete
dquot contents will not be corrected by log recovery.
Because quotacheck uses a transaction to log the setting of the CHKD
flags in the superblock, we skip quotacheck during the second mount
call, which allows the incorrect icount to remain.
Fix this by changing the ondisk dquot initialization function to use
ordered buffers to write out fresh dquot blocks if it detects that we're
running quotacheck. If the system goes down before quotacheck can
complete, the CHKD flags will not be set in the superblock and the next
mount will run quotacheck again, which can fix uninitialized dquot
buffers. This requires amending the defer code to maintaine ordered
buffer state across defer rolls for the sake of the dquot allocation
code.
For regular operations we preserve the current behavior since the dquot
items require properly initialized ondisk dquot records.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The attr fork can transition from shortform to leaf format while
empty if the first xattr doesn't fit in shortform. While this empty
leaf block state is intended to be transient, it is technically not
due to the transactional implementation of the xattr set operation.
We historically have a couple of bandaids to work around this
problem. The first is to hold the buffer after the format conversion
to prevent premature writeback of the empty leaf buffer and the
second is to bypass the xattr count check in the verifier during
recovery. The latter assumes that the xattr set is also in the log
and will be recovered into the buffer soon after the empty leaf
buffer is reconstructed. This is not guaranteed, however.
If the filesystem crashes after the format conversion but before the
xattr set that induced it, only the format conversion may exist in
the log. When recovered, this creates a latent corrupted state on
the inode as any subsequent attempts to read the buffer fail due to
verifier failure. This includes further attempts to set xattrs on
the inode or attempts to destroy the attr fork, which prevents the
inode from ever being removed from the unlinked list.
To avoid this condition, accept that an empty attr leaf block is a
valid state and remove the count check from the verifier. This means
that on rare occasions an attr fork might exist in an unexpected
state, but is otherwise consistent and functional. Note that we
retain the logic to avoid racing with metadata writeback to reduce
the window where this can occur.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
This patch corrects the SPDX License Identifier style in header files
related to XFS File System support. For C header files
Documentation/process/license-rules.rst mandates C-like comments.
(opposed to C source files where C++ style should be used).
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
sizeof(flexible-array-member) triggers a warning because flexible array
members have incomplete type[1]. There are some instances of code in
which the sizeof operator is being incorrectly/erroneously applied to
zero-length arrays and the result is zero. Such instances may be hiding
some bugs. So, this work (flexible-array member conversions) will also
help to get completely rid of those sorts of issues.
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
DCACHE_DONTCACHE indicates a dentry should not be cached on final
dput().
Also add a helper function to mark DCACHE_DONTCACHE on all dentries
pointing to a specific inode when that inode is being set I_DONTCACHE.
This facilitates dropping dentry references to inodes sooner which
require eviction to swap S_DAX mode.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
DAX effective mode (S_DAX) changes requires inode eviction.
XFS has an advisory flag (XFS_IDONTCACHE) to prevent caching of the
inode if no other additional references are taken. We lift this flag to
the VFS layer and change the behavior slightly by allowing the flag to
remain even if multiple references are taken.
This will expedite the eviction of inodes to change S_DAX.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Remove duplicate headers which are included twice.
Signed-off-by: Chen Zhou <chenzhou10@huawei.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The random buffer write failure errortag patch introduced a local
mount pointer variable for the test macro, but the macro is compiled
out on !DEBUG kernels. This results in an unused variable warning.
Access the mount structure through the buffer pointer and remove the
local mount pointer to address the warning.
Fixes: 7376d74547 ("xfs: random buffer write failure errortag")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Remove unnecessary includes from the log recovery code.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Move the helpers that handle incore buffer cancellation records to
xfs_buf_item_recover.c since they're not directly related to the main
log recovery machinery. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The only purpose of XFS_LI_RECOVERED is to prevent log recovery from
trying to replay recovered intents more than once. Therefore, we can
move the bit setting up to the ->iop_recover caller.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Now that we've made the recovered item tests all the same, we can hoist
the test and the ail locking code to the ->iop_recover caller and call
the recovery function directly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Rename XFS_{EFI,BUI,RUI,CUI}_RECOVERED to XFS_LI_RECOVERED so that we
track recovery status in the log item, then get rid of the now unused
flags fields in each of those log item types.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
During recovery, every intent that we recover from the log has to be
added to the AIL. Replace the open-coded addition with a helper.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Replace the open-coded AIL item walking with a proper helper when we're
trying to release an intent item that has been finished. We add a new
->iop_match method to decide if an intent item matches a supplied ID.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Now that we've finished converting all types of log intent items to
provide an ->iop_recover function, we can convert the "is this an intent
item?" predicate to look for a non-null iop_recover pointer.
Move the predicate closer to the functions that use it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the code that processes the log items created from the recovered
log items into the per-item source code files and use dispatch functions
to call them. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the code that processes the log items created from the recovered
log items into the per-item source code files and use dispatch functions
to call them. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the code that processes the log items created from the recovered
log items into the per-item source code files and use dispatch functions
to call them. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the code that processes the log items created from the recovered
log items into the per-item source code files and use dispatch functions
to call them. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Quotaoff doesn't actually do anything, so take advantage of the
commit_pass2 pointer being optional and get rid of the switch
statement clause.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the bmap update intent and intent-done pass2 commit code into the
per-item source code files and use dispatch functions to call them. We
do these one at a time because there's a lot of code to move. No
functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the refcount update intent and intent-done pass2 commit code into
the per-item source code files and use dispatch functions to call them.
We do these one at a time because there's a lot of code to move. No
functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the rmap update intent and intent-done pass2 commit code into the
per-item source code files and use dispatch functions to call them. We
do these one at a time because there's a lot of code to move. No
functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the extent free intent and intent-done pass2 commit code into the
per-item source code files and use dispatch functions to call them. We
do these one at a time because there's a lot of code to move. No
functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the log icreate item pass2 commit code into the per-item source code
files and use the dispatch function to call it. We do these one at a
time because there's a lot of code to move. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the log dquot item pass2 commit code into the per-item source code
files and use the dispatch function to call it. We do these one at a
time because there's a lot of code to move. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the log inode item pass2 commit code into the per-item source code
files and use the dispatch function to call it. We do these one at a
time because there's a lot of code to move. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the log buffer item pass2 commit code into the per-item source code
files and use the dispatch function to call it. We do these one at a
time because there's a lot of code to move. No functional changes.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the pass1 commit code into the per-item source code files and use
the dispatch function to call them.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the pass2 readhead code into the per-item source code files and use
the dispatch function to call them.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create a generic dispatch structure to delegate recovery of different
log item types into various code modules. This will enable us to move
code specific to a particular log item type out of xfs_log_recover.c and
into the log item source.
The first operation we virtualize is the log item sorting.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Remove the old typedefs.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
iget_flags is unused in xfs_imap_to_bp(). Remove the parameter and
fix up the callers.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Both types control shutdown messaging and neither is used in the
current codebase.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Introduce an error tag to randomly fail async buffer writes. This is
primarily to facilitate testing of the XFS error configuration
mechanism.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The stale parameter was used to control the now unused shutdown
parameter of xfs_trans_ail_remove().
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Now that the functions and callers of
xfs_trans_ail_[remove|delete]() have been fixed up appropriately,
the only difference between the two is the shutdown behavior. There
are only a few callers of the _remove() variant, so make the
shutdown conditional on the parameter and combine the two functions.
Suggested-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The shutdown parameter of xfs_trans_ail_remove() is no longer used.
The remaining callers use it for items that legitimately might not
be in the AIL or from contexts where AIL state has already been
checked. Remove the unnecessary parameter and fix up the callers.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Various intent log items call xfs_trans_ail_remove() with a log I/O
error shutdown type, but this helper historically checks whether an
item is in the AIL before calling xfs_trans_ail_delete(). This means
the shutdown check is essentially a no-op for users of
xfs_trans_ail_remove().
It is possible that some items might not be AIL resident when the
AIL remove attempt occurs, but this should be isolated to cases
where the filesystem has already shutdown. For example, this
includes abort of the transaction committing the intent and I/O
error of the iclog buffer committing the intent to the log.
Therefore, update these callsites to use xfs_trans_ail_delete() to
provide AIL state validation for the common path of items being
released and removed when associated done items commit to the
physical log.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Several callers acquire the lock just prior to the call. Callers
that require ->ail_lock for other purposes already check IN_AIL
state and thus don't require the additional shutdown check in the
helper. Push the lock down into xfs_trans_ail_delete(), open code
the instances that still acquire it, and remove the unnecessary ailp
parameter.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The dquot flush handler effectively aborts the dquot flush if the
filesystem is already shut down, but doesn't actually shut down if
the flush fails. Update xfs_qm_dqflush() to consistently abort the
dquot flush and shutdown the fs if the flush fails with an
unexpected error.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The pre-flush dquot verification in xfs_qm_dqflush() duplicates the
read verifier by checking the dquot in the on-disk buffer. Instead,
verify the in-core variant before it is flushed to the buffer.
Fixes: 7224fa482a ("xfs: add full xfs_dqblk verifier")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
At unmount time, XFS emits an alert for every in-core buffer that
might have undergone a write error. In practice this behavior is
probably reasonable given that the filesystem is likely short lived
once I/O errors begin to occur consistently. Under certain test or
otherwise expected error conditions, this can spam the logs and slow
down the unmount.
Now that we have a ratelimit mechanism specifically for buffer
alerts, reuse it for the per-buffer alerts in xfs_wait_buftarg().
Also lift the final repair message out of the loop so it always
prints and assert that the metadata error handling code has shut
down the fs.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
XFS has some inconsistent log message rate limiting with respect to
buffer alerts. The metadata I/O error notification uses the generic
ratelimited alert, the buffer push code uses a custom rate limit and
the similar quiesce time failure checks are not rate limited at all
(when they should be).
The custom rate limit defined in the buf item code is specifically
crafted for buffer alerts. It is more aggressive than generic rate
limiting code because it must accommodate a high frequency of I/O
error events in a relative short timeframe.
Factor out the custom rate limit state from the buf item code into a
per-buftarg rate limit so various alerts are limited based on the
target. Define a buffer alert helper function and use it for the
buffer alerts that are already ratelimited.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The buffer write failure flag is intended to control the internal
write retry that XFS has historically implemented to help mitigate
the severity of transient I/O errors. The flag is set when a buffer
is resubmitted from the I/O completion path due to a previous
failure. It is checked on subsequent I/O completions to skip the
internal retry and fall through to the higher level configurable
error handling mechanism. The flag is cleared in the synchronous and
delwri submission paths and also checked in various places to log
write failure messages.
There are a couple minor problems with the current usage of this
flag. One is that we issue an internal retry after every submission
from xfsaild due to how delwri submission clears the flag. This
results in double the expected or configured number of write
attempts when under sustained failures. Another more subtle issue is
that the flag is never cleared on successful I/O completion. This
can cause xfs_wait_buftarg() to suggest that dirty buffers are being
thrown away due to the existence of the flag, when the reality is
that the flag might still be set because the write succeeded on the
retry.
Clear the write failure flag on successful I/O completion to address
both of these problems. This means that the internal retry attempt
occurs once since the last time a buffer write failed and that
various other contexts only see the flag set when the immediately
previous write attempt has failed.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The shutdown check in xfs_iflush() duplicates checks down in the
buffer code. If the fs is shut down, xfs_trans_read_buf_map() always
returns an error and falls into the same error path. Remove the
unnecessary check along with the warning in xfs_imap_to_bp()
that generates excessive noise in the log if the fs is shut down.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The inode flush code has several layers of error handling between
the inode and cluster flushing code. If the inode flush fails before
acquiring the backing buffer, the inode flush is aborted. If the
cluster flush fails, the current inode flush is aborted and the
cluster buffer is failed to handle the initial inode and any others
that might have been attached before the error.
Since xfs_iflush() is the only caller of xfs_iflush_cluster(), the
error handling between the two can be condensed in the top-level
function. If we update xfs_iflush_int() to always fall through to
the log item update and attach the item completion handler to the
buffer, any errors that occur after the first call to
xfs_iflush_int() can be handled with a buffer I/O failure.
Lift the error handling from xfs_iflush_cluster() into xfs_iflush()
and consolidate with the existing error handling. This also replaces
the need to release the buffer because failing the buffer with
XBF_ASYNC drops the current reference.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We use the same buffer I/O failure code in a few different places.
It's not much code, but it's not necessarily self-explanatory.
Factor it into a helper and document it in one place.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Flush locked log items whose underlying buffers fail metadata
writeback are tagged with a special flag to indicate that the flush
lock is already held. This is currently implemented in the type
specific ->iop_push() callback, but the processing required for such
items is not type specific because we're only doing basic state
management on the underlying buffer.
Factor the failed log item handling out of the inode and dquot
->iop_push() callbacks and open code the buffer resubmit helper into
a single helper called from xfsaild_push_item(). This provides a
generic mechanism for handling failed metadata buffer writeback with
a bit less code.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Make sure we release resources properly if we cannot clean out the COW
extents in preparation for an extent swap.
Fixes: 96987eea53 ("xfs: cancel COW blocks before swapext")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The functionality in xfs_diflags_to_linux() and xfs_diflags_to_iflags() are
nearly identical. The only difference is that *_to_linux() is called after
inode setup and disallows changing the DAX flag.
Combining them can be done with a flag which indicates if this is the initial
setup to allow the DAX flag to be properly set only at init time.
So remove xfs_diflags_to_linux() and call the modified xfs_diflags_to_iflags()
directly.
While we are here simplify xfs_diflags_to_iflags() to take struct xfs_inode and
use xfs_ip2xflags() to ensure future diflags are included correctly.
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_inode_supports_dax() should reflect if the inode can support DAX not
that it is enabled for DAX.
Change the use of xfs_inode_supports_dax() to reflect only if the inode
and underlying storage support dax.
Add a new function xfs_inode_should_enable_dax() which reflects if the
inode should be enabled for DAX.
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
As agreed upon[1]. We make the dax mount option a tri-state. '-o dax'
continues to operate the same. We add 'always', 'never', and 'inode'
(default).
[1] https://lore.kernel.org/lkml/20200405061945.GA94792@iweiny-DESK2.sc.intel.com/
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
In prep for the new tri-state mount option which then introduces
XFS_MOUNT_DAX_NEVER.
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
An earlier call of xfs_reinit_inode() from xfs_iget_cache_hit() already
handles initialization of i_rwsem.
Doing so again is unneeded.
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Given how XFS is all based around btrees it doesn't make much sense
to offer a totally generic state when we can just use the btree cursor.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
All defer op instance place their own extension of the log item into
the dfp_done field. Replace that with a xfs_log_item to improve type
safety and make the code easier to follow.
Also use the opportunity to improve the ->finish_item calling conventions
to place the done log item as the higher level structure before the
list_entry used for the individual items.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Split out a helper that operates on a single xfs_defer_pending structure
to untangle the code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
All defer op instance place their own extension of the log item into
the dfp_intent field. Replace that with a xfs_log_item to improve type
safety and make the code easier to follow.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This avoids a per-item indirect call, and also simplifies the interface
a bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
These are aways called together, and my merging them we reduce the amount
of indirect calls, improve type safety and in general clean up the code
a bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Create a helper that encapsulates the whole logic to create a defer
intent. This reorders some of the work that was done, but none of
that has an affect on the operation as only fields that don't directly
interact are affected.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Split out a xlog_add_buffer_cancelled helper which does the low-level
manipulation of the buffer cancelation table, and in that helper call
xlog_find_buffer_cancelled instead of open coding it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Don't bother to allocate memory and convert the log item when we
only need the block number and the length. Just extract them directly
and call xlog_buf_readahead separately in each branch.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Add a little helper to readahead a buffer if it hasn't been cancelled.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This list contains pretty much everything that is not a buffer. The
comment calls it item_list, which is a much better name than inode
list, so switch the actual variable name to that as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Replace the somewhat convoluted use of xlog_peek_buffer_cancelled and
xlog_check_buffer_cancelled with two obvious helpers:
xlog_is_buffer_cancelled, which returns true if there is a buffer in
the cancellation table, and
xlog_put_buffer_cancelled, which also decrements the reference count
of the buffer cancellation table.
Both share a little helper to look up the entry.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There are a couple places where we directly call printk_once() and one
of them doesn't follow the standard xfs subsystem printk format as a
result.
#define printk_once variants to go with our existing printk_ratelimited
#defines so we can do one-shot printks in a consistent manner.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
I ran into a linker warning in XFS that originates from a mismatch
between libelf, binutils and objtool when certain files in the kernel
are built with "gcc -g":
x86_64-linux-ld: fs/xfs/xfs_trace.o: unable to initialize decompress status for section .debug_info
After some discussion, nobody could identify why xfs sets this flag
here. CONFIG_XFS_DEBUG used to enable lots of unrelated settings, but
now its main purpose is to enable extra consistency checks and assertions
that are unrelated to the debug info.
Remove the Makefile logic to set the flag here. If anyone relies
on the debug info, this can simply be enabled again with the global
CONFIG_DEBUG_INFO option.
Dave Chinner writes:
I'm pretty sure it was needed for the original kgdb integration back
in the early 2000s. That was when SGI used to patch their XFS dev
tree with kgdb and debug symbols were needed by the custom kgdb
modules that were ported across from the Irix kernel debugger.
ISTR that the early kcrash kernel dump analysis tools (again,
originated from the Irix "icrash" kernel dump tools) had custom XFS
debug scripts that needed also the debug info to work correctly...
Which is a long way of saying "we don't need it anymore" instead of
"nobody knows why it was set"... :)
Suggested-by: Christoph Hellwig <hch@infradead.org>
Link: https://lore.kernel.org/lkml/20200409074130.GD21033@infradead.org/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Since the "no-allocation" reservations has been removed, the resblks
value should be larger than zero, so remove the unnecessary check.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Simplify the setting of the flags value, and only consider
quota enforcement stuff here.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The check XFS_IS_QUOTA_RUNNING() has been done when enter the
xfs_qm_vop_create_dqattach() function, it will return directly
if the result is false, so the followed XFS_IS_QUOTA_RUNNING()
assertion is unnecessary. If we truly care about this, the check
also can be added to the condition of next if statements.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The initial value of variable udqp is NULL, and we only set the
flag XFS_QMOPT_PQUOTA in xfs_qm_vop_dqalloc() function, so only
the pdqp value is initialized and the udqp value is still NULL.
Since the udqp value is NULL in the rest part of xfs_ioctl_setattr()
function, it is meaningless and do nothing. So remove it from
xfs_ioctl_setattr().
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We share an inode between gquota and pquota with the older
superblock that doesn't have separate pquotino, and for the
need_alloc == false case we don't need to call xfs_dir_ialloc()
function, so add the check if reserved free disk blocks is
needed.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The two if statements have same condition, and the mask value
does not change in xfs_setattr_nonsize(), so combine them.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The trace event xfs_dquot_dqalloc does not depend on the
value uq, so remove the condition, and trace quota allocations
for all quota types.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When we're sorting recovered log items ahead of recovering them and
encounter a log item of unknown type, actually print the type code when
we're rejecting the whole transaction to aid in debugging.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Pull in Christoph Hellwig's series that changes the sysctl's ->proc_handler
methods to take kernel pointers instead. It gets rid of the set_fs address
space overrides used by BPF. As per discussion, pull in the feature branch
into bpf-next as it relates to BPF sysctl progs.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200427071508.GV23230@ZenIV.linux.org.uk/T/
Instead of having all the sysctl handlers deal with user pointers, which
is rather hairy in terms of the BPF interaction, copy the input to and
from userspace in common code. This also means that the strings are
always NUL-terminated by the common code, making the API a little bit
safer.
As most handler just pass through the data to one of the common handlers
a lot of the changes are mechnical.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Move the inode dirty data flushing to a workqueue so that multiple
threads can take advantage of a single thread's flushing work. The
ratelimiting technique used in bdd4ee4 was not successful, because
threads that skipped the inode flush scan due to ratelimiting would
ENOSPC early, which caused occasional (but noticeable) changes in
behavior and sporadic fstest regressions.
Therefore, make all the writer threads wait on a single inode flush,
which eliminates both the stampeding hordes of flushers and the small
window in which a write could fail with ENOSPC because it lost the
ratelimit race after even another thread freed space.
Fixes: c6425702f2 ("xfs: ratelimit inode flush on buffered write ENOSPC")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
In the reflink extent remap function, it turns out that uirec (the block
mapping corresponding only to the part of the passed-in mapping that got
unmapped) was not fully initialized. Specifically, br_state was not
being copied from the passed-in struct to the uirec. This could lead to
unpredictable results such as the reflinked mapping being marked
unwritten in the destination file.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
The filesystem freeze sequence in XFS waits on any background
eofblocks or cowblocks scans to complete before the filesystem is
quiesced. At this point, the freezer has already stopped the
transaction subsystem, however, which means a truncate or cowblock
cancellation in progress is likely blocked in transaction
allocation. This results in a deadlock between freeze and the
associated scanner.
Fix this problem by holding superblock write protection across calls
into the block reapers. Since protection for background scans is
acquired from the workqueue task context, trylock to avoid a similar
deadlock between freeze and blocking on the write lock.
Fixes: d6b636ebb1 ("xfs: halt auto-reclamation activities while rebuilding rmap")
Reported-by: Paul Furtado <paulfurtado91@gmail.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reflink should force the log out to disk if the filesystem was mounted
with wsync, the same as most other operations in xfs.
[Note: XFS_MOUNT_WSYNC is set when the admin mounts the filesystem
with either the 'wsync' or 'sync' mount options, which effectively means
that we're classifying reflink/dedupe as IO operations and making them
synchronous when required.]
Fixes: 3fc9f5e409 ("xfs: remove xfs_reflink_remap_range")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
[darrick: add more to the changelog]
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Create a new helper to force the log up to the last LSN touching an
inode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Qian Cai reports seemingly random buffer read verifier errors during
filesystem writeback. This was isolated to a recent patch that
factored out some inode cluster freeing code and happened to cast an
unsigned inode number type to a signed value. If the inode number
value overflows, we can skip marking in-core inodes associated with
the underlying buffer stale at the time the physical inodes are
freed. If such an inode happens to be dirty, xfsaild will eventually
attempt to write it back over non-inode blocks. The invalidation of
the underlying inode buffer causes writeback to read the buffer from
disk. This fails the read verifier (preventing eventual corruption)
if the buffer no longer looks like an inode cluster. Analysis by
Dave Chinner.
Fix up the helper to use the proper type for inode number values.
Fixes: 5806165a66 ("xfs: factor inode lookup from xfs_ifree_cluster")
Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The variables 'udqp' and 'gdqp' have been initialized, so remove
redundant variable assignment in xfs_symlink().
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
A customer reported rcu stalls and softlockup warnings on a computer
with many CPU cores and many many more IO threads trying to write to a
filesystem that is totally out of space. Subsequent analysis pointed to
the many many IO threads calling xfs_flush_inodes -> sync_inodes_sb,
which causes a lot of wb_writeback_work to be queued. The writeback
worker spends so much time trying to wake the many many threads waiting
for writeback completion that it trips the softlockup detector, and (in
this case) the system automatically reboots.
In addition, they complain that the lengthy xfs_flush_inodes scan traps
all of those threads in uninterruptible sleep, which hampers their
ability to kill the program or do anything else to escape the situation.
If there's thousands of threads trying to write to files on a full
filesystem, each of those threads will start separate copies of the
inode flush scan. This is kind of pointless since we only need one
scan, so rate limit the inode flush.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
If the inode buffer backing a particular inode is locked,
xfs_iflush() returns -EAGAIN and xfs_inode_item_push() skips the
inode. It still returns success to xfsaild, however, which bypasses
the xfsaild backoff heuristic. Update xfs_inode_item_push() to
return locked status if the inode buffer couldn't be locked.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
A dquot flush currently blocks on the buffer lock for the underlying
dquot buffer. In turn, this causes xfsaild to block rather than
continue processing other items in the meantime. Update
xfs_qm_dqflush() to trylock the buffer, similar to how inode buffers
are handled, and return -EAGAIN if the lock fails. Fix up any
callers that don't currently handle the error properly.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Since the "no-allocation" reservations for file creations has
been removed, the resblks value should be larger than zero, so
remove unnecessary ternary conditional.
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: s/judgment/ternary/]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
In commit f467cad95f, I added the ability to force a recalculation of
the filesystem summary counters if they seemed incorrect. This was done
(not entirely correctly) by tweaking the log code to write an unmount
record without the UMOUNT_TRANS flag set. At next mount, the log
recovery code will fail to find the unmount record and go into recovery,
which triggers the recalculation.
What actually gets written to the log is what ought to be an unmount
record, but without any flags set to indicate what kind of record it
actually is. This worked to trigger the recalculation, but we shouldn't
write bogus log records when we could simply write nothing.
Fixes: f467cad95f ("xfs: force summary counter recalc at next mount")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
There's lots of indent in this code which makes it a bit hard to
follow. We are also going to completely rework the inode lookup code
as part of the inode reclaim rework, so factor out the inode lookup
code from the inode cluster freeing code.
Based on prototype code from Christoph Hellwig.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We currently wake anything waiting on the log tail to move whenever
the log item at the tail of the log is removed. Historically this
was fine behaviour because there were very few items at any given
LSN. But with delayed logging, there may be thousands of items at
any given LSN, and we can't move the tail until they are all gone.
Hence if we are removing them in near tail-first order, we might be
waking up processes waiting on the tail LSN to change (e.g. log
space waiters) repeatedly without them being able to make progress.
This also occurs with the new sync push waiters, and can result in
thousands of spurious wakeups every second when under heavy direct
reclaim pressure.
To fix this, check that the tail LSN has actually changed on the
AIL before triggering wakeups. This will reduce the number of
spurious wakeups when doing bulk AIL removal and make this code much
more efficient.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Factor the common AIL deletion code that does all the wakeups into a
helper so we only have one copy of this somewhat tricky code to
interface with all the wakeups necessary when the LSN of the log
tail changes.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The XFS inode item slab actually reclaimed by inode shrinker
callbacks from the memory reclaim subsystem. These should be marked
as reclaimable so the mm subsystem has the full picture of how much
memory it can actually reclaim from the XFS slab caches.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The buffer cache shrinker frees more than just the xfs_buf slab
objects - it also frees the pages attached to the buffers. Make sure
the memory reclaim code accounts for this memory being freed
correctly, similar to how the inode shrinker accounts for pages
freed from the page cache due to mapping invalidation.
We also need to make sure that the mm subsystem knows these are
reclaimable objects. We provide the memory reclaim subsystem with a
a shrinker to reclaim xfs_bufs, so we should really mark the slab
that way.
We also have a lot of xfs_bufs in a busy system, spread them around
like we do inodes.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Running metadata intensive workloads, I've been seeing the AIL
pushing getting stuck on pinned buffers and triggering log forces.
The log force is taking a long time to run because the log IO is
getting throttled by wbt_wait() - the block layer writeback
throttle. It's being throttled because there is a huge amount of
metadata writeback going on which is filling the request queue.
IOWs, we have a priority inversion problem here.
Mark the log IO bios with REQ_IDLE so they don't get throttled
by the block layer writeback throttle. When we are forcing the CIL,
we are likely to need to to tens of log IOs, and they are issued as
fast as they can be build and IO completed. Hence REQ_IDLE is
appropriate - it's an indication that more IO will follow shortly.
And because we also set REQ_SYNC, the writeback throttle will now
treat log IO the same way it treats direct IO writes - it will not
throttle them at all. Hence we solve the priority inversion problem
caused by the writeback throttle being unable to distinguish between
high priority log IO and background metadata writeback.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
In certain situations the background CIL push can be indefinitely
delayed. While we have workarounds from the obvious cases now, it
doesn't solve the underlying issue. This issue is that there is no
upper limit on the CIL where we will either force or wait for
a background push to start, hence allowing the CIL to grow without
bound until it consumes all log space.
To fix this, add a new wait queue to the CIL which allows background
pushes to wait for the CIL context to be switched out. This happens
when the push starts, so it will allow us to block incoming
transaction commit completion until the push has started. This will
only affect processes that are running modifications, and only when
the CIL threshold has been significantly overrun.
This has no apparent impact on performance, and doesn't even trigger
until over 45 million inodes had been created in a 16-way fsmark
test on a 2GB log. That was limiting at 64MB of log space used, so
the active CIL size is only about 3% of the total log in that case.
The concurrent removal of those files did not trigger the background
sleep at all.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The current CIL size aggregation limit is 1/8th the log size. This
means for large logs we might be aggregating at least 250MB of dirty objects
in memory before the CIL is flushed to the journal. With CIL shadow
buffers sitting around, this means the CIL is often consuming >500MB
of temporary memory that is all allocated under GFP_NOFS conditions.
Flushing the CIL can take some time to do if there is other IO
ongoing, and can introduce substantial log force latency by itself.
It also pins the memory until the objects are in the AIL and can be
written back and reclaimed by shrinkers. Hence this threshold also
tends to determine the minimum amount of memory XFS can operate in
under heavy modification without triggering the OOM killer.
Modify the CIL space limit to prevent such huge amounts of pinned
metadata from aggregating. We can have 2MB of log IO in flight at
once, so limit aggregation to 16x this size. This threshold was
chosen as it little impact on performance (on 16-way fsmark) or log
traffic but pins a lot less memory on large logs especially under
heavy memory pressure. An aggregation limit of 8x had 5-10%
performance degradation and a 50% increase in log throughput for
the same workload, so clearly that was too small for highly
concurrent workloads on large logs.
This was found via trace analysis of AIL behaviour. e.g. insertion
from a single CIL flush:
xfs_ail_insert: old lsn 0/0 new lsn 1/3033090 type XFS_LI_INODE flags IN_AIL
$ grep xfs_ail_insert /mnt/scratch/s.t |grep "new lsn 1/3033090" |wc -l
1721823
$
So there were 1.7 million objects inserted into the AIL from this
CIL checkpoint, the first at 2323.392108, the last at 2325.667566 which
was the end of the trace (i.e. it hadn't finished). Clearly a major
problem.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Separate out the unmount record writing from the rest of the
ticket and log state futzing necessary to make it work. This is
a no-op, just makes the code cleaner and places the unmount record
formatting and writing alongside the commit record formatting and
writing code.
We can also get rid of the ticket flag clearing before the
xlog_write() call because it no longer cares about the state of
XLOG_TIC_INITED.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xlog_write_done() is just a thin wrapper around xlog_commit_record(), so
they can be merged together easily.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Remove xlog_ticket_done and just call the renamed low-level helpers for
ungranting or regranting log space directly. To make that a little
the reference put on the ticket and all tracing is moved into the actual
helpers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
It is not longer used or checked by anything, so remove the last
traces from the log ticket code.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xfs_log_done() does two separate things. Firstly, it triggers commit
records to be written for permanent transactions, and secondly it
releases or regrants transaction reservation space.
Since delayed logging was introduced, transactions no longer write
directly to the log, hence they never have the XLOG_TIC_INITED flag
cleared on them. Hence transactions never write commit records to
the log and only need to modify reservation space.
Split up xfs_log_done into two parts, and only call the parts of the
operation needed for the context xfs_log_done() is currently being
called from.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Commit and unmount records records do not need start records to be
written, so rearrange the logic in xlog_write() to remove the need
to check for XLOG_TIC_INITED to determine if we should account for
the space used by a start record.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The xlog_write() function iterates over iclogs until it completes
writing all the log vectors passed in. The ticket tracks whether
a start record has been written or not, so only the first iclog gets
a start record. We only ever pass single use tickets to
xlog_write() so we only ever need to write a start record once per
xlog_write() call.
Hence we don't need to store whether we should write a start record
in the ticket as the callers provide all the information we need to
determine if a start record should be written. For the moment, we
have to ensure that we clear the XLOG_TIC_INITED appropriately so
the code in xfs_log_done() still works correctly for committing
transactions.
(darrick: Note the slight behavior change that we always deduct the
size of the op header from the ticket, even for unmount records)
Signed-off-by: Dave Chinner <dchinner@redhat.com>
[hch: pass an explicit need_start_rec argument]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Validate the geometry of the realtime geometry when we mount the
filesystem, so that we don't abruptly shut down the filesystem later on.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
I noticed that fsfreeze can take a very long time to freeze an XFS if
there happens to be a GETFSMAP caller running in the background. I also
happened to notice the following in dmesg:
------------[ cut here ]------------
WARNING: CPU: 2 PID: 43492 at fs/xfs/xfs_super.c:853 xfs_quiesce_attr+0x83/0x90 [xfs]
Modules linked in: xfs libcrc32c ip6t_REJECT nf_reject_ipv6 ipt_REJECT nf_reject_ipv4 ip_set_hash_ip ip_set_hash_net xt_tcpudp xt_set ip_set_hash_mac ip_set nfnetlink ip6table_filter ip6_tables bfq iptable_filter sch_fq_codel ip_tables x_tables nfsv4 af_packet [last unloaded: xfs]
CPU: 2 PID: 43492 Comm: xfs_io Not tainted 5.6.0-rc4-djw #rc4
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-1ubuntu1 04/01/2014
RIP: 0010:xfs_quiesce_attr+0x83/0x90 [xfs]
Code: 7c 07 00 00 85 c0 75 22 48 89 df 5b e9 96 c1 00 00 48 c7 c6 b0 2d 38 a0 48 89 df e8 57 64 ff ff 8b 83 7c 07 00 00 85 c0 74 de <0f> 0b 48 89 df 5b e9 72 c1 00 00 66 90 0f 1f 44 00 00 41 55 41 54
RSP: 0018:ffffc900030f3e28 EFLAGS: 00010202
RAX: 0000000000000001 RBX: ffff88802ac54000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff81e4a6f0 RDI: 00000000ffffffff
RBP: ffff88807859f070 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000010 R12: 0000000000000000
R13: ffff88807859f388 R14: ffff88807859f4b8 R15: ffff88807859f5e8
FS: 00007fad1c6c0fc0(0000) GS:ffff88807e000000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f0c7d237000 CR3: 0000000077f01003 CR4: 00000000001606a0
Call Trace:
xfs_fs_freeze+0x25/0x40 [xfs]
freeze_super+0xc8/0x180
do_vfs_ioctl+0x70b/0x750
? __fget_files+0x135/0x210
ksys_ioctl+0x3a/0xb0
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x50/0x1a0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
These two things appear to be related. The assertion trips when another
thread initiates a fsmap request (which uses an empty transaction) after
the freezer waited for m_active_trans to hit zero but before the the
freezer executes the WARN_ON just prior to calling xfs_log_quiesce.
The lengthy delays in freezing happen because the freezer calls
xfs_wait_buftarg to clean out the buffer lru list. Meanwhile, the
GETFSMAP caller is continuing to grab and release buffers, which means
that it can take a very long time for the buffer lru list to empty out.
We fix both of these races by calling sb_start_write to obtain freeze
protection while using empty transactions for GETFSMAP and for metadata
scrubbing. The other two users occur during mount, during which time we
cannot fs freeze.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
If the bio_add_page() call fails, we proceed to write out a
partially constructed log buffer. This corrupts the physical log
such that log recovery is not possible. Worse, persistent
occurrences of this error eventually lead to a BUG_ON() failure in
bio_split() as iclogs wrap the end of the physical log, which
triggers log recovery on subsequent mount.
Rather than warn about writing out a corrupted log buffer, shutdown
the fs as is done for any log I/O related error. This preserves the
consistency of the physical log such that log recovery succeeds on a
subsequent mount. Note that this was observed on a 64k page debug
kernel without upstream commit 59bb47985c ("mm, sl[aou]b:
guarantee natural alignment for kmalloc(power-of-two)"), which
demonstrated frequent iclog bio overflows due to unaligned (slab
allocated) iclog data buffers.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When we're checking bestfree information in directory blocks, always
drop the block buffer at the end of the function. We should always
release resources when we're done using them.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
The dirattr btree checking code uses the altpath substructure of the
dirattr state structure to check the sibling pointers of dir/attr tree
blocks. At the end of sibling checks, xfs_da3_path_shift could have
changed multiple levels of buffer pointers in the altpath structure.
Although we release the leaf level buffer, this isn't enough -- we also
need to release the node buffers that are unique to the altpath.
Not releasing all of the altpath buffers leaves them locked to the
transaction. This is suboptimal because we should release resources
when we don't need them anymore. Fix the function to loop all levels of
the altpath, and fix the return logic so that we always run the loop.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
When quotacheck runs, it zeroes all the timer fields in every dquot.
Unfortunately, it also does this to the root dquot, which erases any
preconfigured grace intervals and warning limits that the administrator
may have set. Worse yet, the incore copies of those variables remain
set. This cache coherence problem manifests itself as the grace
interval mysteriously being reset back to the defaults at the /next/
mount.
Fix it by not resetting the root disk dquot's timer and warning fields.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Open code the xlog_state_want_sync logic in its two callers given that
this function is a trivial wrapper around xlog_state_switch_iclogs.
Move the lockdep assert into xlog_state_switch_iclogs to not lose this
debugging aid, and improve the comment that documents
xlog_state_switch_iclogs as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Use the shutdown flag in the log to bypass xlog_state_clean_iclog
entirely in case of a shut down log.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Factor out a few self-contained helpers from xlog_state_clean_iclog, and
update the documentation so it primarily documents why things happens
instead of how.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We can just check for a shut down log all the way down in
xlog_cil_committed instead of passing the parameter. This means a
slight behavior change in that we now also abort log items if the
shutdown came in halfway into the I/O completion processing, which
actually is the right thing to do.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There is no need to check for the ioerror state before the lock, as
the shutdown case is not a fast path. Also remove the call to force
shutdown the file system, as it must have been shut down already
for an iclog to be in the ioerror state. Also clean up the flow of
the function a bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The only caller of xfs_log_release_iclog doesn't care about the return
value, so remove it. Also don't bother passing the mount pointer,
given that we can trivially derive it from the iclog.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Factor out the shared code to wait for a log force into a new helper.
This helper uses the XLOG_FORCED_SHUTDOWN check previous only used
by the unmount code over the equivalent iclog ioerror state used by
the other two functions.
There is a slight behavior change in that the force of the unmount
record is now accounted in the log force statistics.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
xlog_cil_push is only called by xlog_cil_push_work, so merge the two
functions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We know the version is 3 if on a v5 file system. For earlier file
systems formats we always upgrade the remaining v1 inodes to v2 and
thus only use v2 inodes. Use the xfs_sb_version_has_large_dinode
helper to check if we deal with small or large dinodes, and thus
remove the need for the di_version field in struct icdinode.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Only v5 file systems can have the reflink feature, and those will
always use the large dinode format. Remove the extra check for the
inode version.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
di_flags2 is initialized to zero for v4 and earlier file systems. This
means di_flags2 can only be non-zero for a v5 file systems, in which
case both the parent and child inodes can store the field. Remove the
extra di_version check, and also remove the rather pointless local
di_flags2 variable while at it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The size of the dinode structure is only dependent on the file system
version, so instead of checking the individual inode version just use
the newly added xfs_sb_version_has_large_dinode helper, and simplify
various calling conventions.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Add a new wrapper to check if a file system supports the v3 inode format
with a larger dinode core. Previously we used xfs_sb_version_hascrc for
that, which is technically correct but a little confusing to read.
Also move xfs_dinode_good_version next to xfs_sb_version_has_v3inode
so that we have one place that documents the superblock version to
inode version relationship.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
AIL removal of the quotaoff start intent and free of both quotaoff
intents is currently limited to the ->iop_committed() handler of the
end intent. This executes when the end intent is committed to the
on-disk log and marks the completion of the operation. The problem
with this is it assumes the success of the operation. If a shutdown
or other error occurs during the quotaoff, it's possible for the
quotaoff task to exit without removing the start intent from the
AIL. This results in an unmount hang as the AIL cannot be emptied.
Further, no other codepath frees the intents and so this is also a
memory leak vector.
First, update the high level quotaoff error path to directly remove
and free the quotaoff start intent if it still exists in the AIL at
the time of the error. Next, update both of the start and end
quotaoff intents with an ->iop_release() callback to properly handle
transaction abort.
This means that If the quotaoff start transaction aborts, it frees
the start intent in the transaction commit path. If the filesystem
shuts down before the end transaction allocates, the quotaoff
sequence removes and frees the start intent. If the end transaction
aborts, it removes the start intent and frees both. This ensures
that a shutdown does not result in a hung unmount and that memory is
not leaked regardless of when a quotaoff error occurs.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
AIL removal of the quotaoff start intent and free of both intents is
hardcoded to the ->iop_committed() handler of the end intent. Factor
out the start intent handling code so it can be used in a future
patch to properly handle quotaoff errors. Use xfs_trans_ail_remove()
instead of the _delete() variant to acquire the AIL lock and also
handle cases where an intent might not reside in the AIL at the
time of a failure.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Add support for btree staging cursors for the rmap btrees. This is
needed both for online repair and also to convert xfs_repair to use
btree bulk loading.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Add support for btree staging cursors for the refcount btrees. This
is needed both for online repair and also to convert xfs_repair to use
btree bulk loading.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Add support for btree staging cursors for the inode btrees. This
is needed both for online repair and also to convert xfs_repair to use
btree bulk loading.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Add support for btree staging cursors for the free space btrees. This
is needed both for online repair and also to convert xfs_repair to use
btree bulk loading.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Add a new btree function that enables us to bulk load a btree cursor.
This will be used by the upcoming online repair patches to generate new
btrees. This avoids the programmatic inefficiency of calling
xfs_btree_insert in a loop (which generates a lot of log traffic) in
favor of stamping out new btree blocks with ordered buffers, and then
committing both the new root and scheduling the removal of the old btree
blocks in a single transaction commit.
The design of this new generic code is based off the btree rebuilding
code in xfs_repair's phase 5 code, with the explicit goal of enabling us
to share that code between scrub and repair. It has the additional
feature of being able to control btree block loading factors.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Create an in-core fake root for inode-rooted btree types so that callers
can generate a whole new btree using the upcoming btree bulk load
function without making the new tree accessible from the rest of the
filesystem. It is up to the individual btree type to provide a function
to create a staged cursor (presumably with the appropriate callouts to
update the fakeroot) and then commit the staged root back into the
filesystem.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Create an in-core fake root for AG-rooted btree types so that callers
can generate a whole new btree using the upcoming btree bulk load
function without making the new tree accessible from the rest of the
filesystem. It is up to the individual btree type to provide a function
to create a staged cursor (presumably with the appropriate callouts to
update the fakeroot) and then commit the staged root back into the
filesystem.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Add a xbitmap_hweight helper function so that we can get rid of the
open-coded loop.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Shorten the name of xfs_bitmap to xbitmap since the scrub bitmap has
nothing to do with the libxfs bitmap.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Remove the xfs_bitmap_destroy call from the end of xrep_reap_extents
because this sort of violates our rule that the function initializing a
structure should destroy it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
When I lifted the code in xfs_alloc_ag_vextent_lastblock out of a loop,
I forgot to convert all the accesses to len to be pointer dereferences.
Coverity-id: 1457918
Fixes: 5113f8ec37 ("xfs: clean up weird while loop in xfs_alloc_ag_vextent_near")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
If the xfs_buf_map array allocation in xfs_dabuf_map fails for whatever
reason, we bail out with error code zero. This will confuse callers, so
make sure that we return ENOMEM. Allocation failure should never happen
with the small size of the array, but code defensively anyway.
Fixes: 45feef8f50 ("xfs: refactor xfs_dabuf_map")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Move the code for verifying the iclog state on a clean unmount into a
helper, and instead of checking the iclog state just rely on the shutdown
check as they are equivalent. Also remove the ifdef DEBUG as the
compiler is smart enough to eliminate the dead code for non-debug builds.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
When the log is shut down all iclogs are in the XLOG_STATE_IOERROR state,
which means that xlog_state_want_sync and xlog_state_release_iclog are
no-ops. Remove the whole section of code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Remove the ignored return value from xfs_log_unmount_write, and also
remove a rather pointless assert on the return value from xfs_log_force.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
A shutdown log is a slow failure path. Add an unlikely annotation to
it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This is much less widely used than the bc_private union was, so this
is done as a single patch. The named union xfs_btree_cur_private
goes away and is embedded into the struct xfs_btree_cur_ag as an
anonymous union, and the code is modified via this script:
$ sed -i 's/priv\.\([abt|refc]\)/\1/g' fs/xfs/*[ch] fs/xfs/*/*[ch]
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
we need to name the btree cursor private structures to be able
to pull them out of the deeply nested structure definition they are
in now.
Based on code extracted from a patchset by Darrick Wong.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Rename the union and it's internal structures to the new name and
remove the temporary defines that facilitated the change.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
