The only sensible exponent for a boolean stat is 0. Add a test assertion
requiring all boolean statistics to have an exponent of 0.
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Message-Id: <20220719143134.3246798-4-oliver.upton@linux.dev>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As it turns out, tests sometimes fail. When that is the case, packing
the test assertion with as much relevant information helps track down
the problem more quickly.
Sharpen up the stat descriptor assertions in kvm_binary_stats_test to
more precisely describe the reason for the test assertion and which
stat is to blame.
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Message-Id: <20220719143134.3246798-3-oliver.upton@linux.dev>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In order to provide more useful test assertions that describe the broken
stats descriptor, perform sanity check on the stat name before any other
descriptor field. While at it, avoid dereferencing the name field if the
sanity check fails as it is more likely to contain garbage.
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Message-Id: <20220719143134.3246798-2-oliver.upton@linux.dev>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the code to read the binary stats data to the KVM selftests
library. It will be re-used by other tests to check KVM behavior.
Also opportunistically remove an unnecessary calculation with
"size_data" in stats_test.
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220613212523.3436117-6-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix a variety of code style violations and/or inconsistencies in the
binary stats test. The 80 char limit is a soft limit and can and should
be ignored/violated if doing so improves the overall code readability.
Specifically, provide consistent indentation and don't split expressions
at arbitrary points just to honor the 80 char limit.
Opportunistically expand/add comments to call out the more subtle aspects
of the code.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220613212523.3436117-5-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the code to read the binary stats descriptors to the KVM selftests
library. It will be re-used by other tests to check KVM behavior.
No functional change intended.
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220613212523.3436117-4-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the code to read the binary stats header to the KVM selftests
library. It will be re-used by other tests to check KVM behavior.
No functional change intended.
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220613212523.3436117-3-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There's no need to allocate dynamic memory for the stats header since
its size is known at compile time.
Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20220613212523.3436117-2-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm_binary_stats_test accepts two arguments, the number of vms
and number of vcpus. If these inputs are not equal then the
test would likely crash for one reason or another due to using
miscalculated indices for the vcpus array. Fix the index
expressions by swapping the use of i and j.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20220614081041.2571511-1-drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add TEST_REQUIRE() and __TEST_REQUIRE() to replace the myriad open coded
instances of selftests exiting with KSFT_SKIP after printing an
informational message. In addition to reducing the amount of boilerplate
code in selftests, the UPPERCASE macro names make it easier to visually
identify a test's requirements.
Convert usage that erroneously uses something other than print_skip()
and/or "exits" with '0' or some other non-KSFT_SKIP value.
Intentionally drop a kvm_vm_free() in aarch64/debug-exceptions.c as part
of the conversion. All memory and file descriptors are freed on process
exit, so the explicit free is superfluous.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add kvm_has_cap() to wrap kvm_check_cap() and return a bool for the use
cases where the caller only wants check if a capability is supported,
i.e. doesn't care about the value beyond whether or not it's non-zero.
The "check" terminology is somewhat ambiguous as the non-boolean return
suggests that '0' might mean "success", i.e. suggests that the ioctl uses
the 0/-errno pattern. Provide a wrapper instead of trying to find a new
name for the raw helper; the "check" terminology is derived from the name
of the ioctl, so using e.g. "get" isn't a clear win.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Return an 'unsigned int' instead of a signed 'int' from kvm_check_cap(),
to make it more obvious that kvm_check_cap() can never return a negative
value due to its assertion that the return is ">= 0".
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Take a vCPU directly instead of a VM+vcpu pair in all vCPU-scoped helpers
and ioctls.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Track vCPUs by their 'struct kvm_vcpu' object in kvm_binary_stats_test,
not by their ID. The per-vCPU helpers will soon take a vCPU instead of a
VM+vcpu_id pair.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename vm_vcpu_add() to __vm_vcpu_add(), and vm_vcpu_add_default() to
vm_vcpu_add() to show the relationship between the newly minted
vm_vcpu_add() and __vm_vcpu_add().
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename vm_create() to vm_create_barebones() and drop the @phys_pages
param. Pass '0' for the number of pages even though some callers pass
'DEFAULT_GUEST_PHY_PAGES', as the intent behind creating truly barebones
VMs is purely to create a VM, i.e. there aren't vCPUs, there's no guest
code loaded, etc..., and so there is nothing that will ever need or
consume guest memory.
Freeing up the name vm_create() will allow using the name for an inner
helper to the other VM creators, which need a "full" VM.
Opportunisticaly rewrite the function comment for addr_gpa2alias() to
focus on what the _function_ does, not what its _sole caller_ does.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the recently introduced VM-specific ioctl() helpers instead of open
coding calls to ioctl() just to pretty print the ioctl name. Keep a few
open coded assertions that provide additional info.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the recently introduced vCPU-specific ioctl() helpers instead of
open coding calls to ioctl() just to pretty print the ioctl name.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop @mode from vm_create() and have it use VM_MODE_DEFAULT. Add and use
an inner helper, __vm_create(), to service the handful of tests that want
something other than VM_MODE_DEFAULT.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Drop the @perm param from vm_create() and always open VM file descriptors
with O_RDWR. There's no legitimate use case for other permissions, and
if a selftest wants to do oddball negative testing it can open code the
necessary bits instead of forcing a bunch of tests to provide useless
information.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The bucket_size field should be non-zero for linear histogram stats and
should be zero for other stats types.
Reviewed-by: David Matlack <dmatlack@google.com>
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Message-Id: <20210802165633.1866976-4-jingzhangos@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
