Immediate packets should only be sent to peer when there are new
receive credits made available. New credits show up on freeing
receive buffer, not on receiving data.
Fix this by avoid unnenecessary work schedules.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When processing errors from ib_post_send(), the transport state needs to be
rolled back to the condition before the error.
Refactor the old code to make it easy to roll back on IB errors, and fix this.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Recevie credits should be updated before sending the packet, not
before a work is scheduled. Also, the value needs roll back if
something fails and cannot send.
Signed-off-by: Long Li <longli@microsoft.com>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Sometimes the remote peer may return more send credits than the send queue
depth. If all the send credits are used to post senasd, we may overflow the
send queue.
Fix this by checking the send queue size before posting a send.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
As an optimization, SMBD tries to track two types of packets: packets with
payload and without payload. There is no obvious benefit or performance gain
to separately track two types of packets.
Just treat them as pending packets and merge the tracking code.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When a RDMA packet is received and server is extending send credits, we should
check and unblock senders immediately in IRQ context. Doing it in a worker
queue causes unnecessary delay and doesn't save much CPU on the receive path.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The packet size needs to take account of SMB2 header size and possible
encryption header size. This is only done when signing is used and it is for
RDMA send/receive, not read/write.
Also remove the dead SMBD code in smb2_negotiate_r(w)size.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
It's not necessary to queue invalidated memory registration to work queue, as
all we need to do is to unmap the SG and make it usable again. This can save
CPU cycles in normal data paths as memory registration errors are rare and
normally only happens during reconnection.
Signed-off-by: Long Li <longli@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
The transport should return this error so the upper layer will reconnect.
Signed-off-by: Long Li <longli@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Log these activities to help production support.
Signed-off-by: Long Li <longli@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
While it's not friendly to fail user processes that issue more iovs
than we support, at least we should return the correct error code so the
user process gets a chance to retry with smaller number of iovs.
Signed-off-by: Long Li <longli@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Send and Receive completion is handled on a single CPU selected at
the time each Completion Queue is allocated. Typically this is when
an initiator instantiates an RDMA transport, or when a target
accepts an RDMA connection.
Some ULPs cannot open a connection per CPU to spread completion
workload across available CPUs and MSI vectors. For such ULPs,
provide an API that allows the RDMA core to select a completion
vector based on the device's complement of available comp_vecs.
ULPs that invoke ib_alloc_cq() with only comp_vector 0 are converted
to use the new API so that their completion workloads interfere less
with each other.
Suggested-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Cc: <linux-cifs@vger.kernel.org>
Cc: <v9fs-developer@lists.sourceforge.net>
Link: https://lore.kernel.org/r/20190729171923.13428.52555.stgit@manet.1015granger.net
Signed-off-by: Doug Ledford <dledford@redhat.com>
Based on 3 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [kishon] [vijay] [abraham]
[i] [kishon]@[ti] [com] this program is distributed in the hope that
it will be useful but without any warranty without even the implied
warranty of merchantability or fitness for a particular purpose see
the gnu general public license for more details
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [graeme] [gregory]
[gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i]
[kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema]
[hk] [hemahk]@[ti] [com] this program is distributed in the hope
that it will be useful but without any warranty without even the
implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1105 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When sending data, use the DMA_TO_DEVICE to map buffers. Also log the number
of requests in a compounding request from upper layer.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
To support compounding, __smb_send_rqst() now sends an array of requests to
the transport layer.
Change smbd_send() to take an array of requests, and send them in as few
packets as possible.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Failure to send a packet doesn't mean it's a permanent failure, it can't be
returned to user process. This I/O should be retried or failed based on
server packet response and transport health. This logic is handled by the
upper layer.
Give this decision to upper layer.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When packets are waiting for outbound I/O and interrupted, return the
proper error code to user process.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Now upper layer is handling the transport shutdown and reconnect, remove
the code that handling transport shutdown on RDMA disconnect.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
On transport recoonect, upper layer CIFS code destroys the current
transport and then recoonect. This code path is not used by SMBD, in that
SMBD destroys its transport on RDMA disconnect notification independent of
CIFS upper layer behavior.
This approach adds some costs to SMBD layer to handle transport shutdown
and restart, and to deal with several racing conditions on reconnecting
transport.
Re-work this code path by introducing a new smbd_destroy. This function is
called form upper layer to ask SMBD to destroy the transport. SMBD will no
longer need to destroy the transport by itself while worrying about data
transfer is in progress. The upper layer guarantees the transport is
locked.
change log:
v2: fix build errors when CONFIG_CIFS_SMB_DIRECT is not configured
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
a trivial patch that replaces all use of snprintf with scnprintf.
scnprintf() is generally seen as a safer function to use than
snprintf for many use cases.
In our case, there is no actual difference between the two since we never
look at the return value. Thus we did not have any of the bugs that
scnprintf protects against and the patch does nothing.
However, for people reading our code it will be a receipt that we
have done our due dilligence and checked our code for this type of bugs.
See the presentation "Making C Less Dangerous In The Linux Kernel"
at this years LCA
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Make all the required change to start use the ib_device_ops structure.
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Pull AFS updates from Al Viro:
"AFS series, with some iov_iter bits included"
* 'work.afs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (26 commits)
missing bits of "iov_iter: Separate type from direction and use accessor functions"
afs: Probe multiple fileservers simultaneously
afs: Fix callback handling
afs: Eliminate the address pointer from the address list cursor
afs: Allow dumping of server cursor on operation failure
afs: Implement YFS support in the fs client
afs: Expand data structure fields to support YFS
afs: Get the target vnode in afs_rmdir() and get a callback on it
afs: Calc callback expiry in op reply delivery
afs: Fix FS.FetchStatus delivery from updating wrong vnode
afs: Implement the YFS cache manager service
afs: Remove callback details from afs_callback_break struct
afs: Commit the status on a new file/dir/symlink
afs: Increase to 64-bit volume ID and 96-bit vnode ID for YFS
afs: Don't invoke the server to read data beyond EOF
afs: Add a couple of tracepoints to log I/O errors
afs: Handle EIO from delivery function
afs: Fix TTL on VL server and address lists
afs: Implement VL server rotation
afs: Improve FS server rotation error handling
...
It is not necessary to deregister a memory registration after it has been
successfully invalidated.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Use accessor functions to access an iterator's type and direction. This
allows for the possibility of using some other method of determining the
type of iterator than if-chains with bitwise-AND conditions.
Signed-off-by: David Howells <dhowells@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAltwm2geHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGITkH/iSzkVhT2OxHoir0
mLVzTi7/Z17L0e/ELl7TvAC0iLFlWZKdlGR0g3b4/QpXLPmNK4HxiDRTQuWn8ke0
qDZyDq89HqLt+mpeFZ43PCd9oqV8CH2xxK3iCWReqv6bNnowGnRpSStlks4rDqWn
zURC/5sUh7TzEG4s997RrrpnyPeQWUlf/Mhtzg2/WvK2btoLWgu5qzjX1uFh3s7u
vaF2NXVJ3X03gPktyxZzwtO1SwLFS1jhwUXWBZ5AnoJ99ywkghQnkqS/2YpekNTm
wFk80/78sU+d91aAqO8kkhHj8VRrd+9SGnZ4mB2aZHwjZjGcics4RRtxukSfOQ+6
L47IdXo=
=sJkt
-----END PGP SIGNATURE-----
Merge tag 'v4.18' into rdma.git for-next
Resolve merge conflicts from the -rc cycle against the rdma.git tree:
Conflicts:
drivers/infiniband/core/uverbs_cmd.c
- New ifs added to ib_uverbs_ex_create_flow in -rc and for-next
- Merge removal of file->ucontext in for-next with new code in -rc
drivers/infiniband/core/uverbs_main.c
- for-next removed code from ib_uverbs_write() that was modified
in for-rc
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Instead of declaring and passing a dummy 'bad_wr' pointer, pass NULL
as third argument to ib_post_(send|recv|srq_recv)().
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
SMB1 mounting broke in commit 35e2cc1ba7
("cifs: Use correct packet length in SMB2_TRANSFORM header")
Fix it and also rename smb2_rqst_len to smb_rqst_len
to make it less unobvious that the function is also called from
CIFS/SMB1
Good job by Paulo reviewing and cleaning up Ronnie's original patch.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Paulo Alcantara <palcantara@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
This patch replaces the ib_device_attr.max_sge with max_send_sge and
max_recv_sge. It allows ulps to take advantage of devices that have very
different send and recv sge depths. For example cxgb4 has a max_recv_sge
of 4, yet a max_send_sge of 16. Splitting out these attributes allows
much more efficient use of the SQ for cxgb4 with ulps that use the RDMA_RW
API. Consider a large RDMA WRITE that has 16 scattergather entries.
With max_sge of 4, the ulp would send 4 WRITE WRs, but with max_sge of
16, it can be done with 1 WRITE WR.
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
In smb3_init_transform_rq(), 'orig_len' was only counting the request
length, but forgot to count any data pages in the request.
Writing or creating files with the 'seal' mount option was broken.
In addition, do some code refactoring by exporting smb2_rqst_len() to
calculate the appropriate packet size and avoid duplicating the same
calculation all over the code.
The start of the io vector is either the rfc1002 length (4 bytes) or a
SMB2 header which is always > 4. Use this fact to check and skip the
rfc1002 length if requested.
Signed-off-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Change code to pass the correct page offset during memory registration for
RDMA read/write.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
RDMA recv function needs to place data to the correct place starting at
page offset.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The RDMA send function needs to look at offset in the request pages, and
send data starting from there.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
It's not necessary to allocate another iov when going through the buffers
in smbd_send() through RDMA send.
Remove it to reduce stack size.
Thanks to Matt for spotting a printk typo in the earlier version of this.
CC: Matt Redfearn <matt.redfearn@mips.com>
Signed-off-by: Long Li <longli@microsoft.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <smfrench@gmail.com>
When sending through SMB Direct, also dump the packet in SMB send path.
Also fixed a typo in debug message.
Signed-off-by: Long Li <longli@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
When sending the last iov that breaks into smaller buffers to fit the
transfer size, it's necessary to check if this is the last iov.
If this is the latest iov, stop and proceed to send pages.
Signed-off-by: Long Li <longli@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
On RDMA errors, transport should disconnect the RDMA CM connection. This
will notify the upper layer, and it will attempt transport reconnect.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>
During transport reconnect, other processes may have registered memory
and blocked on transport. This creates a deadlock situation because the
transport resources can't be freed, and reconnect is blocked.
Fix this by returning to upper layer on timeout. Before returning,
transport status is set to reconnecting so other processes will release
memory registration resources.
Upper layer will retry the reconnect. This is not in fast I/O path so
setting the timeout to 5 seconds.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>
Trivial fix to spelling mistake in log_rdma_send and log_rdma_mr
message text.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Although at least one of these was an overly strict sparse warning
in the new smbdirect code, it is cleaner to fix - so no warnings.
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Minor cleanup of some sparse warnings (including a few misc
endian fixes for the new smb3 rdma code)
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
GCC versions from 4.9 to 6.3 produce a false-positive warning when
dealing with a conditional spin_lock_irqsave():
fs/cifs/smbdirect.c: In function 'smbd_recv_buf':
include/linux/spinlock.h:260:3: warning: 'flags' may be used uninitialized in this function [-Wmaybe-uninitialized]
This function calls some sleeping interfaces, so it is clear that it
does not get called with interrupts disabled and there is no need
to save the irq state before taking the spinlock. This lets us
remove the variable, which makes the function slightly more efficient
and avoids the warning.
A further cleanup could do the same change for other functions in this
file, but I did not want to take this too far for now.
Fixes: ac69f66e54ca ("CIFS: SMBD: Implement function to receive data via RDMA receive")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Steve French <smfrench@gmail.com>
Fixes: 07495ff5d9bc ("CIFS: SMBD: Establish SMB Direct connection")
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Long Li <longli@microsoft.com>
Memory registration is used for transferring payload via RDMA read or write.
After I/O is done, memory registrations are recovered and reused. This
process can be time consuming and is done in a work queue.
Signed-off-by: Long Li <longli@microsoft.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
The transport doesn't maintain send buffers or send queue for transferring
payload via RDMA send. There is no data copy in the transport on send.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
On the receive path, the transport maintains receive buffers and a reassembly
queue for transferring payload via RDMA recv. There is data copy in the
transport on recv when it copies the payload to upper layer.
The transport recognizes the RFC1002 header length use in the SMB
upper layer payloads in CIFS. Because this length is mainly used for TCP and
not applicable to RDMA, it is handled as a out-of-band information and is
never sent over the wire, and the trasnport behaves like TCP to upper layer
by processing and exposing the length correctly on data payloads.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Add function to tear down a SMB Direct connection. This is used by upper layer
to free all SMB Direct connection and transport resources.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Add function to implement a reconnect to SMB Direct. This involves tearing down
the current connection and establishing/negotiating a new connection.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
The upper layer calls this function to connect to peer through SMB Direct.
Each SMB Direct connection is based on a RDMA RC Queue Pair.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Add code to implement the core functions to establish a SMB Direct connection.
1. Establish an RDMA connection to SMB server.
2. Negotiate and setup SMB Direct protocol.
3. Implement idle connection timer and credit management.
SMB Direct is enabled by setting CONFIG_CIFS_SMB_DIRECT.
Add to Makefile to enable building SMB Direct.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
To prepare for protocol implementation, add constants and user-configurable
values for the SMB Direct protocol.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Ronnie Sahlberg <lsahlber.redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
