Commit Graph

745 Commits

Author SHA1 Message Date
Andy Shevchenko
2b57b7ff9d serial: 8250_exar: Fix spelling of "driver"
Fix typo in "Dricer".

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-14 10:59:04 +08:00
James Hogan
b15bfbe642 serial: 8250_dw: Fix breakage when HAVE_CLK=n
Commit 6a171b2993 ("serial: 8250_dw: Allow hardware flow control to be
used") recently broke the 8250_dw driver on platforms which don't select
HAVE_CLK, as dw8250_set_termios() gets confused by the behaviour of the
fallback HAVE_CLK=n clock API in linux/clk.h which pretends everything
is fine but returns (valid) NULL clocks and 0 HZ clock rates.

That 0 rate is written into the uartclk resulting in a crash at boot,
e.g. on Cavium Octeon III based UTM-8 we get something like this:

1180000000800.serial: ttyS0 at MMIO 0x1180000000800 (irq = 41, base_baud = 25000000) is a OCTEON
------------[ cut here ]------------
WARNING: CPU: 2 PID: 1 at drivers/tty/serial/serial_core.c:441 uart_get_baud_rate+0xfc/0x1f0
...
Call Trace:
...
[<ffffffff8149c2e4>] uart_get_baud_rate+0xfc/0x1f0
[<ffffffff814a5098>] serial8250_do_set_termios+0xb0/0x440
[<ffffffff8149c710>] uart_set_options+0xe8/0x190
[<ffffffff814a6cdc>] serial8250_console_setup+0x84/0x158
[<ffffffff814a11ec>] univ8250_console_setup+0x54/0x70
[<ffffffff811901a0>] register_console+0x1c8/0x418
[<ffffffff8149f004>] uart_add_one_port+0x434/0x4b0
[<ffffffff814a1af8>] serial8250_register_8250_port+0x2d8/0x440
[<ffffffff814aa620>] dw8250_probe+0x388/0x5e8
...

The clock API is defined such that NULL is a valid clock handle so it
wouldn't be right to check explicitly for NULL. Instead treat a
clk_round_rate() return value of 0 as an error which prevents uartclk
being overwritten.

Fixes: 6a171b2993 ("serial: 8250_dw: Allow hardware flow control to be used")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: linux-serial@vger.kernel.org
Cc: linux-clk@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: bcm-kernel-feedback-list@broadcom.com
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Jason Uy <jason.uy@broadcom.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-14 10:48:11 +08:00
Heiko Stuebner
09498087f9 serial: 8250_dw: Honor clk_round_rate errors in dw8250_set_termios
clk_round_rate returns a signed long and may possibly return errors
in it, for example if there is no possible rate.

Till now dw8250_set_termios ignored any error, the signednes and would
just use the value as input to clk_set_rate. This of course falls apart
if there is an actual error, so check for errors and only try to set
a rate if the value is actually valid.

This turned up on some Rockchip platforms after commit
6a171b2993 ("serial: 8250_dw: Allow hardware flow control to be used")
enabled set_termios callback in all cases, not only ACPI.

Fixes: 6a171b2993 ("serial: 8250_dw: Allow hardware flow control to be used")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-14 10:48:11 +08:00
Jan Kiszka
172c33cb61 serial: exar: Enable MSI support
Use pci_alloc_irq_vectors to enable MSI when available. At least the
XR17V352 supports this.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10 15:13:26 +01:00
Jan Kiszka
7e12357ed6 serial: exar: Move register defines from uapi header to consumer site
None of these registers is relevant for the userspace API.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10 15:13:26 +01:00
Jan Kiszka
0d560a1d54 serial: pci: Remove unused pci_boards entries
Became obsolete with the split-out of 8250_exar.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10 15:12:39 +01:00
Jan Kiszka
fc6cc96157 serial: exar: Move Commtech adapters to 8250_exar as well
Those are Exar-based, too.

With the required refactoring of the code to fit into 8250_exar, we
automatically fix the same issue pci_xr17v35x_setup had before: 8XMODE,
FCTL, TXTRG and RXTRG were always only set for port 0. Now they are
initialized for the correct target port by using port.membase.

Now we can also cleanly fix the blacklist of 8250_pci so that all
Commtech devices are rejected and 8250_exar can handle them.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10 15:12:38 +01:00
Jan Kiszka
5b5f252d67 serial: exar: Fix initialization of EXAR registers for ports > 0
So far, pci_xr17v35x_setup always initialized 8XMODE, FCTR & Co. for
port 0 because it used the address of that port instead of moving the
pointer according to the port number. Fix this and remove the unneeded
temporary ioremap by moving default_setup up and reusing the membase it
fills into the port structure.

Fixes: 14faa8cce8 ("tty/8250 Add support for Commtech's Fastcom Async-335 and Fastcom Async-PCIe cards")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10 15:12:38 +01:00
Jan Kiszka
24572af4fb serial: exar: Fix mapping of port I/O resources
pcim_iomap_table only returns the table of mapping, it does not perform
them. For that, we need to call pcim_iomap, but only if that mapping was
not done before.

Fixes: d0aeaa83f0 ("serial: exar: split out the exar code from 8250_pci")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10 15:12:38 +01:00
Douglas Anderson
424d79183a serial: 8250_dw: Avoid "too much work" from bogus rx timeout interrupt
On a Rockchip rk3399-based board during suspend/resume testing, we
found that we could get the console UART into a state where it would
print this to the console a lot:
  serial8250: too much work for irq42

Followed eventually by:
  NMI watchdog: BUG: soft lockup - CPU#0 stuck for 11s!

Upon debugging I found that we're in this state:
  iir = 0x000000cc
  lsr = 0x00000060

It appears that somehow we have a RX Timeout interrupt but there is no
actual data present to receive.  When we're in this state the UART
driver claims that it handled the interrupt but it actually doesn't
really do anything.  This means that we keep getting the interrupt
over and over again.

Normally we don't actually need to do anything special to handle a RX
Timeout interrupt.  We'll notice that there is some data ready and
we'll read it, which will end up clearing the RX Timeout.  In this
case we have a problem specifically because we got the RX TImeout
without any data.  Reading a bogus byte is confirmed to get us out of
this state.

It's unclear how exactly the UART got into this state, but it is known
that the UART lines are essentially undriven and unpowered during
suspend, so possibly during resume some garbage / half transmitted
bits are seen on the line and put the UART into this state.

The UART on the rk3399 is a DesignWare based 8250 UART.  From mailing
list posts, it appears that other people have run into similar
problems with DesignWare based IP.  Presumably this problem is unique
to that IP, so I have placed the workaround there to avoid possibly of
accidentally triggering bad behavior on other IP.  Also note the RX
Timeout behaves very differently in the DMA case, for for now the
workaround is only applied to the non-DMA case.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10 15:10:16 +01:00
Wei Yongjun
80cd94e759 serial: 8250_pci: make pciserial_detach_ports() static
Fixes the following sparse warning:

drivers/tty/serial/8250/8250_pci.c:3916:6: warning:
 symbol 'pciserial_detach_ports' was not declared. Should it be static?

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-09 13:54:49 +01:00
Ian Abbott
1c9c858e2f serial: 8250_pci: Add MKS Tenta SCOM-0800 and SCOM-0801 cards
The MKS Instruments SCOM-0800 and SCOM-0801 cards (originally by Tenta
Technologies) are 3U CompactPCI serial cards with 4 and 8 serial ports,
respectively.  The first 4 ports are implemented by an OX16PCI954 chip,
and the second 4 ports are implemented by an OX16C954 chip on a local
bus, bridged by the second PCI function of the OX16PCI954.  The ports
are jumper-selectable as RS-232 and RS-422/485, and the UARTs use a
non-standard oscillator frequency of 20 MHz (base_baud = 1250000).

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-06 09:47:52 +01:00
Sudip Mukherjee
5d1a2388ed serial: 8250_pci: remove exar code
Remove the Exar specific codes from 8250_pci and blacklist those chips
so that the new Exar serial driver binds to the devices.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-03 10:12:16 +01:00
Sudip Mukherjee
d0aeaa83f0 serial: exar: split out the exar code from 8250_pci
Add the serial driver for the Exar chips. And also register the
platform device for the GPIO provided by the Exar chips.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-03 10:12:16 +01:00
Arnd Bergmann
aa42db44f6 8250: of: remove remnants of generic of_serial driver
During build testing, I ran into a warning in a driver that I
had written myself at some point:

drivers/tty/serial/8250/8250_of.c: In function 'of_platform_serial_probe':
drivers/tty/serial/8250/8250_of.c:233:1: error: the frame size of 1200 bytes is larger than 1152 bytes [-Werror=frame-larger-than=]

This is harmless by itself, but it shows two other problems in
the driver:

- It still tries to be generic enough to handle all kinds of serial
  ports, where in reality the driver has been 8250-only for a while,
  and every other uart has its own DT support

- As a result of that generalization, we keep two copies of
  'struct uart_port' on the stack during probe(). This is completely
  unnessary.

Removing the last code dealing with unsupported port_type values
solves both problems nicely, and reduces the stack size.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-27 09:23:36 +01:00
Tony Lindgren
4e0f5cc650 serial: 8250_omap: Fix probe and remove for PM runtime
Otherwise the interconnect related code implementing PM runtime will
produce these errors on a failed probe:

omap_uart 48066000.serial: omap_device: omap_device_enable() called from invalid state 1
omap_uart 48066000.serial: use pm_runtime_put_sync_suspend() in driver?

Note that we now also need to check for priv in omap8250_runtime_suspend()
as it has not yet been registered if probe fails. And we need to use
pm_runtime_put_sync() to properly idle the device like we already do
in omap8250_remove().

Fixes: 61929cf016 ("tty: serial: Add 8250-core based omap driver")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25 11:08:30 +01:00
Paul Gortmaker
f99b63afb9 serial: hp300: mask the warning for people just doing build coverage
Currently this warning is triggered for allmodconfig on m68k.  It is
well intentioned, in that if you are building the driver but not
enabling one of the platforms where the hardware exists, you get a
warning.

The warning dates back to pre-git days, and now we have COMPILE_TEST
so we can use that to mask the warning for people who are obviously
just doing build coverage on tree wide changes.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: linux-m68k@lists.linux-m68k.org
Cc: linux-serial@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-25 11:08:30 +01:00
Vignesh R
aa75941ca1 serial: 8250_omap: Remove rx_dma_broken flag
8250 UART DMA support was marked broken by default as it was not
possible to pause ongoing RX DMA transfer. Now that both SDMA and
EDMA can support pause operation for RX DMA transactions, don't set
rx_dma_broken to true by default. With this patch 8250_omap driver will
use DMA by default.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-20 14:44:37 +01:00
Vignesh R
b6ffcf2108 serial: 8250_omap: Add OMAP_DMA_TX_KICK quirk for AM437x
UART uses as EDMA as dma engine on AM437x SoC and therefore, requires
OMAP_DMA_TX_KICK quirk just like AM33xx. So, enable OMAP_DMA_TX_KICK
quirk for AM437x platform as well. While at that, drop use of
of_machine_is_compatible() and instead pass quirks via device data.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-20 14:44:37 +01:00
Vignesh R
75f54acc08 serial: 8250_omap: pause DMA only if DMA transfer in progress
It is possible that DMA transfer is already complete but, completion
handler is yet to be called, when dmaengine_pause() is called in case of
error condition(like break/rx timeout). This leads to dmaengine_pause()
API to return EINVAL (as descriptor is already NULL) causing
rx_dma_broken flag to be set and effectively disabling RX DMA.
Fix this by calling dmaengine_pause() only when transfer is in progress.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-20 14:44:37 +01:00
Arvind Yadav
2cc32b18d1 tty: serial: 8250: 8250_gsc:- Handle return NULL error from ioremap_nocache
Here, If ioremap_nocache will fail. It will return NULL.
Kernel can run into a NULL-pointer dereference.
This error check will avoid NULL pointer dereference.

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19 14:20:23 +01:00
Andy Shevchenko
216e234d66 serial: 8250_mid: set PCI master only for DMA capable device
There is no need to set PCI bus mastering when device is not doing any DMA. It
includes MSI type of interrupts. Currently only UART on Denverton, which is DMA
capable, might have MSI enabled.

Taking above into account enable bus mastering for Denverton case only.

Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19 14:20:23 +01:00
Andy Shevchenko
6d59225f2d serial: 8250_mid: enable MSI on Denverton
Enable MSI type of interrupt if PCI BIOS supports it.

Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19 14:20:23 +01:00
Andy Shevchenko
4831e0d905 serial: 8250_mid: handle interrupt correctly in DMA case
Starting from Tangier B0 and continuing on Anniedale the HSU DMA interrupt
line is actually shared with UART. Handling them independently is racy and
quite often comes with the following traceback.

 irq 54: nobody cared (try booting with the "irqpoll" option)
 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.9.0-rc6-edison64-86244934+ #1
 Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542 2015.01.21:18.19.48
  ffff88003f203eb0 ffffffff8130e718 ffff880032627000 ffff88003262709c
  ffff88003f203ed8 ffffffff810a3960 ffff880032627000 0000000000000000
  ffff880032627000 ffff88003f203f10 ffffffff810a3cc7 ffff880032627000
 Call Trace:
  <IRQ>
  [<ffffffff8130e718>] dump_stack+0x4d/0x65
  [<ffffffff810a3960>] __report_bad_irq+0x30/0xc0
  [<ffffffff810a3cc7>] note_interrupt+0x227/0x270
  [<ffffffff810a1380>] handle_irq_event_percpu+0x40/0x50
  [<ffffffff810a13b7>] handle_irq_event+0x27/0x50
  [<ffffffff810a42d5>] handle_fasteoi_irq+0x85/0x150
  [<ffffffff8101d7fe>] handle_irq+0x6e/0x120
  [<ffffffff8105b8bc>] ? _local_bh_enable+0x1c/0x50
  [<ffffffff8101d0d6>] do_IRQ+0x46/0xd0
  [<ffffffff818cef3f>] common_interrupt+0x7f/0x7f
  <EOI>
  [<ffffffff818cdead>] ? mwait_idle+0x7d/0x140
  [<ffffffff81024c9a>] arch_cpu_idle+0xa/0x10
  [<ffffffff818ce150>] default_idle_call+0x20/0x30
  [<ffffffff810908fd>] cpu_startup_entry+0x16d/0x1d0
  [<ffffffff818c882d>] rest_init+0x6d/0x70
  [<ffffffff81f93e8f>] start_kernel+0x3e2/0x3ef
  [<ffffffff81f9343d>] x86_64_start_reservations+0x38/0x3a
  [<ffffffff81f93529>] x86_64_start_kernel+0xea/0xed
 handlers:
 [<ffffffff81411670>] serial8250_interrupt
 Disabling IRQ #54

Fix this by handling interrupt only in one place.

The issue is discussed here: https://github.com/andy-shev/linux/issues/5

Moreover this also fixes another bug when Rx DMA returns wrong residue and we
can't rely on it.

Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19 14:20:23 +01:00
Jason Uy
6a171b2993 serial: 8250_dw: Allow hardware flow control to be used
In the most common use case, the Synopsys DW UART driver does not
set the set_termios callback function.  This prevents UPSTAT_AUTOCTS
from being set when the UART flag CRTSCTS is set.  As a result, the
driver will use software flow control as opposed to hardware flow
control.

To fix the problem, the set_termios callback function is set to the
DW specific function.  The logic to set UPSTAT_AUTOCTS is moved so
that any clock error will not affect setting the hardware flow
control.

Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Jason Uy <jason.uy@broadcom.com>
Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-19 14:20:23 +01:00
Greg Kroah-Hartman
11cca3d12f Merge 4.10-rc4 into tty-next
We want the serial/tty fixes in here as well to build on top of.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-16 16:57:54 +01:00
David Lechner
a2d6a987bf serial: 8250: Add new port type for TI DA8xx/66AK2x
This adds a new UART port type for TI DA8xx/OMAPL13x/AM17xx/AM18xx/66AK2x.
These SoCs have standard 8250 registers plus some extra non-standard
registers.

The UART will not function unless the non-standard Power and Emulation
Management Register (PWREMU_MGMT) is configured correctly. This is
currently handled in arch/arm/mach-davinci/serial.c for non-device-tree
boards. Making this part of the UART driver will allow UART to work on
device-tree boards as well and the mach code can eventually be removed.

Signed-off-by: David Lechner <david@lechnology.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-12 11:51:25 +01:00
Jean Delvare
194588930c serial: 8250_mid: make option visible
Hiding tristate options with "if EXPERT" is usually not a good idea.
You can decide that the driver should be included by default, but you
don't know if the user wants it built-in or as a module. Hiding the
option prevents the user from making that decision.

This is even more problematic when said option selects other options.
You end up with several device drivers forcibly built into the kernel.

In this specific case, drivers 8250_mid, virt-dma, hsu_dma and
hsu_dma_pci end up being built-in as soon as SERIAL_8250=y. It is
very common for distribution kernels to build the subsystem core code
into the kernel, because almost everybody will need it, but build all
the device drivers as modules. This should be made possible.

So drop the "if EXPERT" and make SERIAL_8250_MID visible.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: 1fc969c759 ("serial: 8250_mid: make module available only on X86")
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Jiri Slaby <jslaby@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-12 11:51:25 +01:00
Jean Delvare
dce22df190 serial: 8250_lpss: make option visible
Hiding tristate options with "if EXPERT" is usually not a good idea.
You can decide that the driver should be included by default, but you
don't know if the user wants it built-in or as a module. Hiding the
option prevents the user from making that decision.

This is even more problematic when said option selects other options.
You end up with several device drivers forcibly built into the kernel.

In this specific case, drivers 8250_lpss, dw_dmac_core and
dw_dmac_pci end up being built-in as soon as SERIAL_8250=y. It is
very common for distribution kernels to build the subsystem core code
into the kernel, because almost everybody will need it, but build all
the device drivers as modules. This should be made possible.

So drop the "if EXPERT" and make SERIAL_8250_LPSS visible.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: a13e19cf3d ("serial: 8250_lpss: split LPSS driver to separate module")
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Jiri Slaby <jslaby@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-12 11:51:25 +01:00
Jean Delvare
f1e8c710e2 serial: 8250_pci: make option visible
Hiding tristate options with "if EXPERT" is usually not a good idea.
You can decide that the driver should be included by default, but you
don't know if the user wants it built-in or as a module. Hiding the
option prevents the user from making that decision.

In this specific case, driver 8250_pci ends up being built-in as soon
as SERIAL_8250=y. It is very common for distribution kernels to build
the subsystem core code into the kernel, because almost everybody
will need it, but build all the device drivers as modules. This
should be made possible.

So drop the "if EXPERT" and make SERIAL_8250_PCI visible.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Jiri Slaby <jslaby@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-12 11:51:25 +01:00
Alexey Brodkin
699a11ba7e serial: 8250_port: Remove dangerous pr_debug()
With CONFIG_DYNAMIC_DEBUG if dyndbg enables debug output in
8250_port.c deadlock happens inevitably on UART IRQ handling.

That's the problematic execution path:
---------------------------->8------------------------
UART IRQ:
  serial8250_interrupt() ->
    serial8250_handle_irq(): lock "port->lock" ->
      pr_debug() ->
        serial8250_console_write(): bump in locked "port->lock".

      OR (if above pr_debug() gets removed):
      serial8250_tx_chars() ->
        pr_debug() ->
          serial8250_console_write(): bump in locked "port->lock".
---------------------------->8------------------------

So let's get rid of those not that much useful debug entries.

Discussed problem could be easily reproduced with QEMU for x86_64.
As well as this fix could be mimicked with muting of dynamic debug for
the problematic lines as simple as:
---------------------------->8------------------------
dyndbg="+p; file 8250_port.c line 1756 -p; file 8250_port.c line 1822 -p"
---------------------------->8------------------------

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Phillip Raffeck <phillip.raffeck@fau.de>
Cc: Anton Wuerfel <anton.wuerfel@fau.de>
Cc: "Matwey V. Kornilov" <matwey@sai.msu.ru>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Cc: Thor Thayer <tthayer@opensource.altera.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-12 11:51:25 +01:00
Andy Shevchenko
3f08087826 serial: 8250_lpss: avoid potential kernel crash when remove
This is a follow up to the commit a9b01b5823 ("serial: 8250_mid fix calltrace
when hotplug 8250 serial controller") in which the kernel crash was described
for another 8250 based driver. It appears that we have the very same issue in
8250_lpss. Fix it by unregistering serial driver first.

Cc: Liwei Song <liwei.song@windriver.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-12 11:51:25 +01:00
Matwey V. Kornilov
9c4b60fe53 serial: 8250: moxa: Store num_ports in brd
When struct moxa8250_board is allocated, then num_ports should
be initialized in order to use it later in moxa8250_remove.

Signed-off-by: Matwey V. Kornilov <matwey@sai.msu.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-12 11:51:25 +01:00
Ji-Ze Hong (Peter Hong)
6def047c29 serial: 8250_fintek: Add resource check for Fintek F81504/508/512
Add resource type check for Fintek F81504/508/512, BAR3/4/5 must be
IORESOURCE_IO.

Fintek is trying to make F81504/508/512 works on MMIO interface, but
it's still in progress. We found some issue when the experiment IC
when the BAR3/4/5 is IORESOURCE_MEM. It'll cause wrong operation with
IO resource. So we'll add the resource check for this.

Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-12 11:51:24 +01:00
Herbert Xu
6741f551a0 Revert "tty: serial: 8250: add CON_CONSDEV to flags"
This commit needs to be reverted because it prevents people from
using the serial console as a secondary console with input being
directed to tty0.

IOW, if you boot with console=ttyS0 console=tty0 then all kernels
prior to this commit will produce output on both ttyS0 and tty0
but input will only be taken from tty0.  With this patch the serial
console will always be the primary console instead of tty0,
potentially preventing people from getting into their machines in
emergency situations.

Fixes: d03516df83 ("tty: serial: 8250: add CON_CONSDEV to flags")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-11 08:35:17 +01:00
Daniel Jedrychowski
2bed8a8e70 Clearing FIFOs in RS485 emulation mode causes subsequent transmits to break
When in RS485 emulation mode, __do_stop_tx_rs485() calls
serial8250_clear_fifos().  This not only clears the FIFOs, but also sets
all bits in their control register (UART_FCR) to 0.

One of the effects of this is the disabling of the FIFOs, which turns
them into single-byte holding registers.  The rest of the driver doesn't
know this, which results in the lions share of characters passed into a
write call to be dropped.

(I can supply logic analyzer screenshots if necessary)

This fix replaces the serial8250_clear_fifos() call to
serial8250_clear_and_reinit_fifos() - this prevents the "dropped
characters" issue from manifesting again while retaining the requirement
of clearing the RX FIFO after transmission if the SER_RS485_RX_DURING_TX
flag is disabled.

Signed-off-by: Daniel Jedrychowski <avistel@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-11 08:35:17 +01:00
Gabriel Krisman Bertazi
c130b666a9 8250_pci: Fix potential use-after-free in error path
Commit f209fa03fc ("serial: 8250_pci: Detach low-level driver during
PCI error recovery") introduces a potential use-after-free in case the
pciserial_init_ports call in serial8250_io_resume fails, which may
happen if a memory allocation fails or if the .init quirk failed for
whatever reason).  If this happen, further pci_get_drvdata will return a
pointer to freed memory.

This patch reworks the PCI recovery resume hook to restore the old priv
structure in this case, which should be ok, since the ports were already
detached. Such error during recovery causes us to give up on the
recovery.

Fixes: f209fa03fc ("serial: 8250_pci: Detach low-level driver during
  PCI error recovery")
Reported-by: Michal Suchanek <msuchanek@suse.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-11 08:35:17 +01:00
Linus Torvalds
e3842cbfe0 dmaengine updates for 4.10-rc1
Fairly routine update this time around with all changes specific to drivers.
 
  o New driver for STMicroelectronics FDMA
  o Memory-to-memory transfers on dw dmac
  o Support for slave maps on pl08x devices
  o Bunch of driver fixes to use dma_pool_zalloc
  o Bunch of compile and warning fixes spread across drivers
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYUg7NAAoJEHwUBw8lI4NH5/gP/j81+2RzCUX8PiLQxNUt0Vj+
 tVJEizpWCwN1cnhc8ibZdI1DAwyj+GbN2lghYTjqqEng4yOm3czPzUl99grBrpQl
 t+Qylr9PSpck/paRhd2lgZzG8Nk+B5HJDcxBQbW4pwmbc69YAbqYzt44i4bDpR5K
 u3mBve1Ulng7peP45EZB8BA32ffCpOEAC/9SdkaPokrSv6XxxPEFvzewy+mLtioU
 a0zY0iuHqVGpOTABK65fXO/zkGiZLPXJ1T5vK7Iz8mOwuvtYVif0yktQSrx3BWbc
 9r64W7Si633wWt/C9LkuMMSmQ7nI/PyHk811cDOcxp3SA79JV5SWwdQl+5QPdtoP
 hyToaISfAY0BiNI9ltdscx3MPjlwSp08xXvi46RjSs8E2TXnbHUw+J5mTsxYuocl
 Yi61nlL5ClhCbySf9Q3GFsuAJ3O2Nq9WkCTNRIvJtrMhe3NeqDDTfBZJRD4Bfg1G
 q8RAc5oqGZDtqKHtLfwULr7Ec2Ru0hIZAyN907OwW+4jBR/eBJB1y+nGrNPtTWPT
 OOcvrxe85/+ZNROGCZKr0L8UA/MBBMZtjvMY8RMXjBE4YJbakq7tV+7l5VolKeNH
 G6I/1CC06qVPHrnetM6YejhtnmOQ4F8P1sE0wvpG0QTyHJoFq+aOhHNKJC8F9Eln
 CQM2apvL4BHvS7OHt9XL
 =Pf0d
 -----END PGP SIGNATURE-----

Merge tag 'dmaengine-4.10-rc1' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine updates from Vinod Koul:
 "Fairly routine update this time around with all changes specific to
  drivers:

   - New driver for STMicroelectronics FDMA
   - Memory-to-memory transfers on dw dmac
   - Support for slave maps on pl08x devices
   - Bunch of driver fixes to use dma_pool_zalloc
   - Bunch of compile and warning fixes spread across drivers"

[ The ST FDMA driver already came in earlier through the remoteproc tree ]

* tag 'dmaengine-4.10-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (68 commits)
  dmaengine: sirf-dma: remove unused ‘sdesc’
  dmaengine: pl330: remove unused ‘regs’
  dmaengine: s3c24xx: remove unused ‘cdata’
  dmaengine: stm32-dma: remove unused ‘src_addr’
  dmaengine: stm32-dma: remove unused ‘dst_addr’
  dmaengine: stm32-dma: remove unused ‘sfcr’
  dmaengine: pch_dma: remove unused ‘cookie’
  dmaengine: mic_x100_dma: remove unused ‘data’
  dmaengine: img-mdc: remove unused ‘prev_phys’
  dmaengine: usb-dmac: remove unused ‘uchan’
  dmaengine: ioat: remove unused ‘res’
  dmaengine: ioat: remove unused ‘ioat_dma’
  dmaengine: ioat: remove unused ‘is_raid_device’
  dmaengine: pl330: do not generate unaligned access
  dmaengine: k3dma: move to dma_pool_zalloc
  dmaengine: at_hdmac: move to dma_pool_zalloc
  dmaengine: at_xdmac: don't restore unsaved status
  dmaengine: ioat: set error code on failures
  dmaengine: ioat: set error code on failures
  dmaengine: DW DMAC: add multi-block property to device tree
  ...
2016-12-14 20:42:45 -08:00
Liwei Song
a9b01b5823 serial: 8250_mid fix calltrace when hotplug 8250 serial controller
Fix the following Calltrace:
[   77.768221] WARNING: CPU: 5 PID: 645 at drivers/dma/dmaengine.c:1069 dma_async_device_unregister+0xe2/0xf0
[   77.775058] dma_async_device_unregister called while 1 clients hold a reference
[   77.825048] CPU: 5 PID: 645 Comm: sh Not tainted 4.8.8-WR9.0.0.0_standard+ #3
[   77.832550] Hardware name: Intel Corp. Aspen Cove/Server, BIOS HAVLCRB1.X64.0012.D58.1604140405 04/14/2016
[   77.840396]  0000000000000000 ffffc90008adbc80 ffffffff81403456 ffffc90008adbcd0
[   77.848245]  0000000000000000 ffffc90008adbcc0 ffffffff8105e2e1 0000042d08adbf20
[   77.855934]  ffff88046a861c18 ffff88046a85c420 ffffffff820d4200 ffff88046ae92318
[   77.863601] Call Trace:
[   77.871113]  [<ffffffff81403456>] dump_stack+0x4f/0x69
[   77.878655]  [<ffffffff8105e2e1>] __warn+0xd1/0xf0
[   77.886102]  [<ffffffff8105e34f>] warn_slowpath_fmt+0x4f/0x60
[   77.893508]  [<ffffffff814187a9>] ? find_next_bit+0x19/0x20
[   77.900730]  [<ffffffff814bf83e>] ? dma_channel_rebalance+0x23e/0x270
[   77.907814]  [<ffffffff814bfee2>] dma_async_device_unregister+0xe2/0xf0
[   77.914992]  [<ffffffff814c53aa>] hsu_dma_remove+0x1a/0x60
[   77.921977]  [<ffffffff814ee14c>] dnv_exit+0x1c/0x20
[   77.928752]  [<ffffffff814edff6>] mid8250_remove+0x26/0x40
[   77.935607]  [<ffffffff8144f1b9>] pci_device_remove+0x39/0xc0
[   77.942292]  [<ffffffff8160cfea>] __device_release_driver+0x9a/0x140
[   77.948836]  [<ffffffff8160d0b3>] device_release_driver+0x23/0x30
[   77.955364]  [<ffffffff81447dcc>] pci_stop_bus_device+0x8c/0xa0
[   77.961769]  [<ffffffff81447f0a>] pci_stop_and_remove_bus_device_locked+0x1a/0x30
[   77.968113]  [<ffffffff81450d4e>] remove_store+0x5e/0x70
[   77.974267]  [<ffffffff81607ed8>] dev_attr_store+0x18/0x30
[   77.980243]  [<ffffffff8123006a>] sysfs_kf_write+0x3a/0x50
[   77.986180]  [<ffffffff8122f5ab>] kernfs_fop_write+0x10b/0x190
[   77.992118]  [<ffffffff811bf1c8>] __vfs_write+0x18/0x40
[   77.998032]  [<ffffffff811bfdee>] vfs_write+0xae/0x190
[   78.003747]  [<ffffffff811c1016>] SyS_write+0x46/0xb0
[   78.009234]  [<ffffffff81a4c31b>] entry_SYSCALL_64_fastpath+0x13/0x8f
[   78.014809] ---[ end trace 0c36dd73b7408eb2 ]---

This happens when the 8250 serial controller is hotplugged as follows:
echo 1 > /sys/bus/pci/devices/0000:00:1a.0/remove

This trace happens due to the serial port still holding a reference when
the dma device is unregistered.
The dma unregister routine will check if there is still a reference exist,
if so it will give the WARNING(here serial port still was not unregister).

To fix this, We need to unregister the serial port first, then do DMA
device unregister to make sure there is no reference when to DMA routine.

Signed-off-by: Liwei Song <liwei.song@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-30 13:06:08 +01:00
Eugeniy Paltsev
bd2c6636cc dmaengine: DW DMAC: add multi-block property to device tree
Several versions of DW DMAC have multi block transfers hardware
support. Hardware support of multi block transfers is disabled
by default if we use DT to configure DMAC and software emulation
of multi block transfers used instead.
Add multi-block property, so it is possible to enable hardware
multi block transfers (if present) via DT.

Switch from per device is_nollp variable to multi_block array
to be able enable/disable multi block transfers separately per
channel.

Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-11-30 08:57:50 +05:30
Gabriel Krisman Bertazi
f209fa03fc serial: 8250_pci: Detach low-level driver during PCI error recovery
During a PCI error recovery, like the ones provoked by EEH in the ppc64
platform, all IO to the device must be blocked while the recovery is
completed.  Current 8250_pci implementation only suspends the port
instead of detaching it, which doesn't prevent incoming accesses like
TIOCMGET and TIOCMSET calls from reaching the device.  Those end up
racing with the EEH recovery, crashing it.  Similar races were also
observed when opening the device and when shutting it down during
recovery.

This patch implements a more robust IO blockage for the 8250_pci
recovery by unregistering the port at the beginning of the procedure and
re-adding it afterwards.  Since the port is detached from the uart
layer, we can be sure that no request will make through to the device
during recovery.  This is similar to the solution used by the JSM serial
driver.

I thank Peter Hurley <peter@hurleysoftware.com> for valuable input on
this one over one year ago.

Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-29 20:20:07 +01:00
Ed Blake
0e0b989eb3 serial: 8250_dw: Add support for IrDA SIR mode
Add a set_ldisc function to enable/disable IrDA SIR mode according to
the new line discipline, if IrDA SIR mode is supported by the hardware
configuration.

Signed-off-by: Ed Blake <ed.blake@imgtec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-16 10:59:38 +01:00
Ed Blake
db405a8f8b serial: 8250: Expose set_ldisc function
Expose set_ldisc() function so that it can be overridden with a
platform specific implementation.

Signed-off-by: Ed Blake <ed.blake@imgtec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-16 10:59:38 +01:00
Ed Blake
98838d9507 serial: 8250: Add IrDA to UART capabilities
Add an IrDA UART capability flag and change the type of
uart_8250_port.capabilities to be u32 rather than unsigned short to
accommodate the additional flag.

Signed-off-by: Ed Blake <ed.blake@imgtec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-16 10:59:38 +01:00
Andy Shevchenko
5fe8667484 serial: 8250_dma: power off device after TX is done
When any 8250 based driver sets up DMA and has UART_CAP_RPM capability enabled
the device is left powered on after transfer is done. We need to schedule a
device suspend operation when DMA completes the transfer.

The patch is based on the work done by the reporter.

Reported-by: Huiquan Zhong <huiquan.zhong@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-16 10:57:26 +01:00
Andy Shevchenko
7d4e00c625 serial: 8250_port: export serial8250_rpm_{get|put}_tx()
The following fix of runtime PM use in DMA mode requires at least
serial8250_rpm_put_tx() to be available. Export both calls.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-16 10:57:26 +01:00
Arnd Bergmann
65dabaf532 serial: pxa2xx: mark PM functions as __maybe_unused
The fresh new serial driver for pxa produces warnings when
CONFIG_PM_SLEEP is disabled:

drivers/tty/serial/8250/8250_pxa.c:50:12: error: 'serial_pxa_resume' defined but not used [-Werror=unused-function]
drivers/tty/serial/8250/8250_pxa.c:41:12: error: 'serial_pxa_suspend' defined but not used [-Werror=unused-function]

This removes the #ifdef around the two functions and instead marks both
as __maybe_unused, which is more robust and avoids the warning.

Fixes: ab28f51c77 ("serial: rewrite pxa2xx-uart to use 8250_core")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-10 14:50:46 +01:00
Angelo Butti
5c31ef91c0 8250: FIX Fourth port offset of Pericom PI7C9X7954 boards
Hi,
below patch to fix Fourth port offset of Percom PI7C9X7954 boards.

I had a problem using Fourth port on a pci express serial board based on Pericom
PI7C9X7954. Reading datasheet I notice a "special" offset assign to this port
when used in I/O mode.

Offset 0x0 ->  UART 0
Offset 0x8 ->  UART 1
Offset 0x10 ->  UART 2
Offset 0x38 ->  UART 3  <<---- This don't follow a logical sequence

This patch add a different init to last port, to have right offset.

I check also Pericom 7952 and 7958 but that devices follow logical sequence,
so they are ok.

Regards,
Angelo

Signed-off-by: Angelo Butti <buttiangelo@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-10 14:41:25 +01:00
Arnd Bergmann
9211432b4a serial: 8250_pxa: hide early console setup when disabled
The newly added pxa glue driver for 8250 supports console output, but
fails to build if the 8250 console is disabled:

drivers/tty/serial/8250/8250_pxa.o: In function `early_serial_pxa_setup':
8250_pxa.c:(.init.text+0x50): undefined reference to `early_serial8250_setup'

This adds an #ifdef like the other glue drivers have it.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-10 14:34:27 +01:00
Masahiro Yamada
da7fa058a3 serial: 8250_uniphier: avoid locking for FCR register write
The hardware book says, the FCR is combined with a register called
CHAR (it will trigger interrupt when a specific character is
received).  At first, I used lock/read/modify/write/unlock dance for
the FCR to not affect the upper bits, but the CHAR is actually never
used.  It should not hurt to always clear the CHAR and to handle the
FCR as a normal case.  It can save the costly locking.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Suggested-by: Denys Vlasenko <dvlasenk@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-10 14:30:09 +01:00
Masahiro Yamada
94cbb6978b serial: 8250_uniphier: hardcode regshift to avoid unneeded memory read
For this driver, uart_port::regshift is always 2.  Hardcode the
shift value instead of reading ->regshift to get an already known
value.  (pointed out by Denys Vlasenko)

Furthermore, I am using register macros that are already shifted,
which will save code a bit.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-11-10 14:30:08 +01:00
Greg Kroah-Hartman
5131dcd781 Merge 4.9-rc3 into tty-next
We want the serial/tty fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-30 06:42:10 -04:00
Steve Shih
ecb988a3b7 tty: serial: 8250: 8250_core: NXP SC16C2552 workaround
NXP SC16C2552 requires that we always write a reset to the RX FIFO and
TX FIFO whenever we enable the FIFOs

Cc: xe-kernel@external.cisco.com
Signed-off-by: Steve Shih <sshih@cisco.com>
Signed-off-by: David Singleton <davsingl@cisco.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-27 16:41:56 +02:00
Ji-Ze Hong (Peter Hong)
de48b0999d serial: 8250_fintek: Add F81865 Support
Fintek F81865 is a LPC to 6 UARTs SuperIO. It has less functional UARTs
likes F81866. It's also need check the IRQ mode with system assigned,
but the configuration is not the same with F81216 series.

F81865 IRQ Mode setting:
    0xf0
            Bit1: IRQ_MODE0
            Bit0: Share mode (always on)

    Level/Low: IRQ_MODE0:0
    Edge/High: IRQ_MODE0:1

The following list is brief descriptions of F81865:

F81865 (0704)
    9Bit(not implements with mainline)
    RS485(implemented)

Suggested-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-27 16:28:17 +02:00
Ji-Ze Hong (Peter Hong)
da60d6afaa serial: 8250_fintek: Add F81866 Support
Fintek F81866 is a LPC to 6 UARTs SuperIO. It has fully functional UARTs
likes F81216H. It's also need check the IRQ mode with system assigned,
but the configuration is not the same with F81216 series.

F81866 IRQ Mode setting:
	0xf0
		Bit1: IRQ_MODE0
		Bit0: Share mode (always on)
	0xf6
		Bit3: IRQ_MODE1

	Level/Low: IRQ_MODE0:0, IRQ_MODE1:0
	Edge/High: IRQ_MODE0:1, IRQ_MODE1:0

The following list is brief descriptions of F81866:

F81866 (1010)
	9Bit/High baud rate(not implements with mainline)
	RS485, 128Bytes FIFO (implemented)

Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-27 16:28:17 +02:00
Ji-Ze Hong (Peter Hong)
1e26c472c1 serial: 8250_fintek: Add F81216 Support
Fintek F81216 is a LPC to 4 UARTs device. It's the F81216 series but
support less functional than F81216AD/F81216H

The following list is brief descriptions of F81216 series:

F81216H (0105)
	9Bit/High baud rate(not implements with mainline)
	RS485, 128Bytes FIFO (implemented)

F81216AD (0216)
	9Bit(not implements with mainline)
	RS485(implemented)

F81216 (0208)
	basically 16550A

Suggested-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-27 16:28:16 +02:00
Ji-Ze Hong (Peter Hong)
c2236facae serial: 8250_fintek: Set maximum FIFO of F81216H
The Fintek F81216H had maximum 128Bytes FIFO, but some BIOS configurated
as normal 16Bytes FIFO. This patch will set 128Bytes FIFO and trigger
level multiplier as 4x when F81216H detected.

Default 16550A trigger level is 8Bytes. When this patch applied, the
trigger level will change to 8Byte x 4 = 32Byte. It can be reduce the RX
incoming interrupts.

Suggested-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-27 16:28:16 +02:00
Ji-Ze Hong (Peter Hong)
06e3957259 serial: 8250_fintek: Set IRQ Mode when port probed
Set IRQ Mode when port probed in probe_setup_port()

It should hold the IO port premission via fintek_8250_enter_key() and
release via fintek_8250_exit_key() when we configure the SuperIO.

This patch will move all SuperIO configure operations to
probe_setup_port() to reduce fintek_8250_enter_key() and
fintek_8250_exit_key() usage.

Suggested-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-27 16:28:16 +02:00
Ji-Ze Hong (Peter Hong)
f1232ac229 serial: 8250_fintek: Refactoring read/write method
If we need to access SuperIO registers, It should write register offset
to base_addr and read/write value to base_addr + 1 to perform read/write.
We can make it more simply with write/read functions.

This patch add sio_read_reg()/sio_write_reg()/sio_write_mask_reg() to
reduce SuperIO register operation with lot of outb()/inb().

Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-27 16:28:16 +02:00
Robert Jarzmik
fea6dd1486 serial: 8250: pxa: add devicetree earlyconsole
Transfer the device-tree pxa uart handling from 8250_of to the new
8250_pxa.  As a corollary, add the early console definition into
8250_pxa.

This enables to have the same uart node for the early console and the
normal uart.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-27 16:27:24 +02:00
Andy Shevchenko
ba061c1a90 serial: 8250_lpss: get IRQ via pci_irq_vector()
Instead of a direct assignment use pci_irq_vector() call as it's done for the
other case.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-27 16:27:24 +02:00
Andy Shevchenko
eca84e99d1 serial: 8250_lpss: Try to enable Memory-Write-Invalidate
Enable MWI mechanism if PCI bus master supports it.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-27 16:27:24 +02:00
Andy Shevchenko
3f3a46951e serial: 8250_lpss: set PCI master only for private DMA
There is no need to set PCI bus mastering when device is not doing any DMA.
Though on Intel Quark DMA is a part of UART IP and thus shares same device in
Linux kernel.

Enable bus mastering only for Quark case.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-27 16:27:24 +02:00
Andy Shevchenko
f00a7c5756 serial: 8250_lpss: enable MSI for sure
The commit 4fe0d15488 ("PCI: Use positive flags in pci_alloc_irq_vectors()")
replaces flags from negative to positive values which makes mandatory to have
the last argument in pci_alloc_irq_vectors() non-zero (if we want to be no-op).
This basically drops MSI enabling in 8250_lpss driver.

Restore desired behaviour in 8250_lpss by passing PCI_IRQ_ALL_TYPES instead of
0 to pci_alloc_irq_vectors().

Fixes: 60a9244a5d ("serial: 8250_lpss: enable MSI for Intel Quark")
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-27 16:05:20 +02:00
Sergey Yanovich
ab28f51c77 serial: rewrite pxa2xx-uart to use 8250_core
pxa2xx-uart was a separate uart platform driver. It was declaring
the same device names and numbers as 8250 driver. As a result,
it was impossible to use 8250 driver on PXA SoCs.

Upon closer examination pxa2xx-uart turned out to be a clone of
8250_core driver.

Workaround for Erratum #19 according to Marvel(R) PXA270M Processor
Specification Update (April 19, 2010) is dropped. 8250_core reads
from FIFO immediately after checking DR bit in LSR.

The patch leaves the original SERIAL_PXA driver around. The original
driver is just marked DEPRECATED in Kconfig and C source. When
the original driver is considered safe to remove, no changes
to SERIAL_8250 will be necessary.

Compiling SERIAL_8250_CONSOLE and SERIAL_PXA_CONSOLE even without
SERIAL_8250_PXA breaks console for SERIAL_PXA. For this reasons, the new
and the original drivers are made mutually exclusive.

Signed-off-by: Sergei Ianovich <ynvich@gmail.com>
CC: Heikki Krogerus <heikki.krogerus@linux.intel.com>
CC: James Cameron <quozl@laptop.org>
CC: Robert Jarzmik <robert.jarzmik@free.fr>
CC: Russell King <linux@arm.linux.org.uk>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
[rebased on v4.8]
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-27 16:03:09 +02:00
Masahiro Yamada
09065c5f0f serial: 8250_uniphier: fix clearing divisor latch access bit
At this point, 'value' is always a byte, then this code is clearing
bit 15, which is already clear.  I meant to clear bit 7.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reported-by: Denys Vlasenko <dvlasenk@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-27 16:01:31 +02:00
Denys Vlasenko
0ead21ad25 serial: 8250_uniphier: fix more unterminated string
Commit 1681d2116c ("serial: 8250_uniphier: add "\n" at the end of
error log") missed this.

Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
[masahiro: add commit log]
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-27 16:01:31 +02:00
Linus Torvalds
e6dce825fb TTY/Serial patches for 4.9-rc1
Here is the big TTY and Serial patch set for 4.9-rc1.
 
 It also includes some drivers/dma/ changes, as those were needed by some
 serial drivers, and they were all acked by the DMA maintainer.  Also in
 here is the long-suffering ACPI SPCR patchset, which was passed around
 from maintainer to maintainer like a hot-potato.  Seems I was the
 sucker^Wlucky one.  All of those patches have been acked by the various
 subsystem maintainers as well.
 
 All of this has been in linux-next with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iFYEABECABYFAlfyNjEPHGdyZWdAa3JvYWguY29tAAoJEDFH1A3bLfspwIcAn2uN
 qCD8xQJ0Cs61hD1nUzhNygG8AJ94I4zz/fPGpyh/CtJfLQwtUdLhNA==
 =Rken
 -----END PGP SIGNATURE-----

Merge tag 'tty-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty and serial updates from Greg KH:
 "Here is the big tty and serial patch set for 4.9-rc1.

  It also includes some drivers/dma/ changes, as those were needed by
  some serial drivers, and they were all acked by the DMA maintainer.

  Also in here is the long-suffering ACPI SPCR patchset, which was
  passed around from maintainer to maintainer like a hot-potato. Seems I
  was the sucker^Wlucky one. All of those patches have been acked by the
  various subsystem maintainers as well.

  All of this has been in linux-next with no reported issues"

* tag 'tty-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (111 commits)
  Revert "serial: pl011: add console matching function"
  MAINTAINERS: update entry for atmel_serial driver
  serial: pl011: add console matching function
  ARM64: ACPI: enable ACPI_SPCR_TABLE
  ACPI: parse SPCR and enable matching console
  of/serial: move earlycon early_param handling to serial
  Revert "drivers/tty: Explicitly pass current to show_stack"
  tty: amba-pl011: Don't complain on -EPROBE_DEFER when no irq
  nios2: dts: 10m50: Add tx-threshold parameter
  serial: 8250: Set Altera 16550 TX FIFO Threshold
  serial: 8250: of: Load TX FIFO Threshold from DT
  Documentation: dt: serial: Add TX FIFO threshold parameter
  drivers/tty: Explicitly pass current to show_stack
  serial: imx: Fix DCD reading
  serial: stm32: mark symbols static where possible
  serial: xuartps: Add some register initialisation to cdns_early_console_setup()
  serial: xuartps: Removed unwanted checks while reading the error conditions
  serial: xuartps: Rewrite the interrupt handling logic
  serial: stm32: use mapbase instead of membase for DMA
  tty/serial: atmel: fix fractional baud rate computation
  ...
2016-10-03 20:11:49 -07:00
Rafael J. Wysocki
52ff5adc1f Merge branch 'device-properties'
* device-properties:
  serial: 8250_dw: Add quirk for APM X-Gene SoC
  ACPI / LPSS: Provide build-in properties of the UART
  ACPI / APD: Provide build-in properties of the UART
  driver core: Don't leak secondary fwnode on device removal
2016-10-02 01:35:42 +02:00
Thor Thayer
8e5470c983 serial: 8250: Set Altera 16550 TX FIFO Threshold
The Altera 16550 soft IP UART requires 2 additional registers for
TX FIFO threshold support. These 2 registers enable the TX FIFO
Low Watermark and set the TX FIFO Low Watermark.
Set the TX FIFO threshold to the FIFO size - tx_loadsz.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27 12:55:50 +02:00
Thor Thayer
ffea043965 serial: 8250: of: Load TX FIFO Threshold from DT
Initialize the tx_loadsz parameter from passed in devicetree
tx-threshold parameter.
The tx_loadsz is calculated as the number of bytes to fill FIFO
when tx-threshold is triggered.

Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27 12:55:49 +02:00
Jiri Olsa
54f19b4a67 tty/serial/8250: Touch NMI watchdog in wait_for_xmitr
First loop in wait_for_xmitr could also trigger NMI
watchdog in case reading from the port is slow:

  PID: 0      TASK: ffffffff819c1460  CPU: 0   COMMAND: "swapper/0"
   #0 [ffff88019f405e58] crash_nmi_callback at ffffffff8104d382
   #1 [ffff88019f405e68] nmi_handle at ffffffff8168ead9
   #2 [ffff88019f405eb0] do_nmi at ffffffff8168ec53
   #3 [ffff88019f405ef0] end_repeat_nmi at ffffffff8168df13
      [exception RIP: delay_tsc+50]
      RIP: ffffffff81325642  RSP: ffff88019f403bb0  RFLAGS: 00000083
      RAX: 00000000000005c8  RBX: ffffffff81f83000  RCX: 0000024e4fb88a8b
      RDX: 0000024e4fb89053  RSI: 0000000000000000  RDI: 00000000000007d1
      RBP: ffff88019f403bb0   R8: 000000000000000a   R9: 0000000000000000
      R10: 0000000000000000  R11: ffff88019f403ad6  R12: 000000000000250f
      R13: 0000000000000020  R14: ffffffff81d360c7  R15: 0000000000000047
      ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
  --- <NMI exception stack> ---
   #4 [ffff88019f403bb0] delay_tsc at ffffffff81325642
   #5 [ffff88019f403bb8] __const_udelay at ffffffff813255a8
   #6 [ffff88019f403bc8] wait_for_xmitr at ffffffff81404390
   #7 [ffff88019f403bf0] serial8250_console_putchar at ffffffff8140455c
   #8 [ffff88019f403c10] uart_console_write at ffffffff813ff00a
   #9 [ffff88019f403c40] serial8250_console_write at ffffffff814044ae
  #10 [ffff88019f403c88] call_console_drivers.constprop.15 at ffffffff81086b01
  #11 [ffff88019f403cb0] console_unlock at ffffffff8108842f
  #12 [ffff88019f403ce8] vprintk_emit at ffffffff81088834
  #13 [ffff88019f403d58] vprintk_default at ffffffff81088ba9
  #14 [ffff88019f403d68] printk at ffffffff8167f034

Adding touch_nmi_watchdog call to the first loop as well.

Reported-by: Chunyu Hu <chuhu@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-22 11:45:08 +02:00
Jan Kiszka
b6fce7382d serial: 8250_pci: Use symbolic constants for EXAR's MPIO registers
Less magic that only requires comments.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-22 11:45:08 +02:00
Greg Kroah-Hartman
b53761e36a Merge 4.8-rc5 into tty-next
We want the fixes in here for merge issues.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-05 08:11:21 +02:00
Andy Shevchenko
d2f5a7311b dmaengine: hsu: refactor hsu_dma_do_irq() to return int
Since we have nice macro IRQ_RETVAL() we would use it to convert a flag of
handled interrupt from int to irqreturn_t.

The rationale of doing this is:
a) hence we implicitly mark hsu_dma_do_irq() as an auxiliary function that
   can't be used as interrupt handler directly, and
b) to be in align with serial driver which is using serial8250_handle_irq()
   that returns plain int by design.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-02 15:05:48 +02:00
Alexander Sverdlin
46e36683f4 serial: earlycon: Extend earlycon command line option to support 64-bit addresses
earlycon implementation used "unsigned long" internally, but there are systems
(ARM with LPAE) where sizeof(unsigned long) == 4 and uart is mapped beyond 4GiB
address range.

Switch to resource_size_t internally and replace obsoleted simple_strtoul() with
kstrtoull().

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-02 15:03:35 +02:00
Kefeng Wang
e06b6b8541 serial: 8250_dw: add ACPI support for uart on Hisilicon Hip05 SoC
Add ACPI identifier for UART on Hisilicon Hip05 SoC, be careful that
it is not 16550 compatible, and "reg-io-width" and "reg-shift" need
be set properly by _DSD method in DSDT.

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-02 15:03:35 +02:00
Andy Shevchenko
f3bf26326f serial: 8250_port: unify check of em485 variable
Unify the check of em485 variable to be either (em485) or (!em485) instead of
the explicit comparison to NULL.

While here, remove redundant check in __do_stop_tx_rs485() and
__stop_tx_rs485() since the functions ain't called with NULL value of em485
variable.

Cc: "Matwey V. Kornilov" <matwey@sai.msu.ru>
Tested-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-02 15:03:35 +02:00
Andy Shevchenko
b3965767d8 serial: 8250_port: fix runtime PM use in __do_stop_tx_rs485()
There are calls to serial8250_rpm_{get|put}() in __do_stop_tx_rs485() that are
certainly placed in a wrong location. I dunno how it had been tested with
runtime PM enabled because it is obvious "sleep in atomic context" error.

Besides that serial8250_rpm_get() is called immediately after an IO just
happened. It implies that the device is already powered on, see implementation
of serial8250_em485_rts_after_send() and serial8250_clear_fifos() for the
details.

There is no bug have been seen due to, as I can guess, use of auto suspend mode
when scheduled transaction to suspend is invoked quite lately than it's needed
for a few writes to the port. It might be possible to trigger a warning if
stop_tx_timer fires when device is suspended.

Refactor the code to use runtime PM only in case of timer function.

Fixes: 0c66940d58 ("tty/serial/8250: fix RS485 half-duplex RX")
Cc: "Matwey V. Kornilov" <matwey@sai.msu.ru>
Tested-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-02 15:03:35 +02:00
Kefeng Wang
2cb78eab23 serial: 8250_dw: Use an unified new dev variable in probe
Use an unified new dev variable instead of &pdev->dev and p->dev
in probe function.

Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-01 21:04:57 +02:00
Heikki Krogerus
20a875e2e8 serial: 8250_dw: Add quirk for APM X-Gene SoC
The APM X-Gene SoC UART is the only board that still needs
the hard-coded values, so handle it separately in
dw8250_quirks(). The other ACPI platforms are able to
provide the values with device properties.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-01 00:25:21 +02:00
Jimi Damon
c8d192428f serial: 8250: added acces i/o products quad and octal serial cards
Added devices ids for acces i/o products quad and octal serial cards
that make use of existing Pericom PI7C9X7954 and PI7C9X7958
configurations .

Signed-off-by: Jimi Damon <jdamon@accesio.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31 16:28:26 +02:00
Andy Shevchenko
fecdef932b serial: 8250_lpss: enable DMA on Intel Quark UART
DMA on Intel Quark SoC is a part of UART IP block. Enable it.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31 16:13:30 +02:00
Andy Shevchenko
60a9244a5d serial: 8250_lpss: enable MSI for Intel Quark
Intel Quark SoC supports MSI for LPSS, in particular for UART. Enable MSI for
Intel Quark.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31 16:13:30 +02:00
Andy Shevchenko
6bb5d75eac serial: 8250_lpss: move Quark code from PCI driver
Intel Quark has DesignWare UART. Move the code from 8250_pci to 8250_lpss.

Reviewed-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31 16:13:30 +02:00
Andy Shevchenko
a13e19cf3d serial: 8250_lpss: split LPSS driver to separate module
The SoCs, such as Intel Braswell, have DesignWare UART IP. Split out the
support of such chips to a separate module which also will be used for Intel
Quark later.

The rationale to have the separate driver to be existing:
- Do not contaminate 8250_pci.c anymore with LPSS related quirks
- All of them are using same DMA engine and they are Designware IP which means
  that in the future we might share the code between 8250_dw.c and 8250_lpss.c
- It reduces the kernel memory footprint on non-X86 machines where 8250_pci.c
  is in use

Besides the split the driver also has been refactored, in particular a) the DMA
and port setup are separate functions, b) the two new structures lpss8250 and
lpss8250_board are introduced to keep necessary data instead of
pciserial_board, c) DMA parameters are passed to the DMA setup via mentioned
custom structure. Most of the changes are done due to the future support of
UART DMA on Intel Quark.

The Intel Quark UART DMA support is based on bits taking from BSP code
published by Intel earlier.

The driver does not use any specific power management. PCI core takes care of
the default behaviour during suspend and resume.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31 16:13:30 +02:00
Andy Shevchenko
68af490b03 serial: 8250: enable AFE on ports where FIFO is 16 bytes
Intel Quark has 16550A compatible UART with autoflow feature enabled. It has
only 16 bytes of FIFO. Currently serial8250_do_set_termios() prevents to enable
autoflow since the minimum requirement of 32 bytes of FIFO size.

Drop a FIFO size limitation to allow autoflow control be enabled on such UARTs.

While here, comment out UART_CAP_AFE for PORT_AR7 since it wasn't working and
it will be not a good idea to use it in conjunction with trigger level of 1
byte.

Suggested-by: Peter Hurley <peter@hurleysoftware.com>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31 16:13:29 +02:00
Andy Shevchenko
d1834babe4 serial: 8250_dma: adjust DMA address of the UART
Some UARTs, e.g. one is used in Intel Quark, have a different address base for
DMA operations. Introduce an additional field (per RX and TX DMA channels) in
struct uart_8250_dma to cover those cases.

Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31 16:13:29 +02:00
Andy Shevchenko
8d17047207 serial: 8250_dma: switch to new dmaengine_terminate_* API
Convert dmaengine_terminate_all() calls to synchronous and asynchronous
versions where appropriate.

Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31 16:13:29 +02:00
Eddie Huang
81bb549fdf serial: 8250_mtk: support big baud rate.
mediatek can support baud rate up to 4M.
the 'uart_get_baud_rate' function will limit the max baud rate.
Modify max baud to remove the limit.

Signed-off-by: Long Cheng <long.cheng@mediatek.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31 16:01:26 +02:00
Andy Shevchenko
47b34d2ef2 serial: 8250_mid: fix divide error bug if baud rate is 0
Since the commit c1a67b48f6 ("serial: 8250_pci: replace switch-case by
formula for Intel MID"), the 8250 driver crashes in the byt_set_termios()
function with a divide error. This is caused by the fact that a baud rate of 0
(B0) is not handled properly. Fix it by falling back to B9600 in this case.

Reported-by: "Mendez Salinas, Fernando" <fernando.mendez.salinas@intel.com>
Fixes: c1a67b48f6 ("serial: 8250_pci: replace switch-case by formula for Intel MID")
Cc: stable@vger.kernel.org
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31 15:49:26 +02:00
Kefeng Wang
e16b46f190 serial: 8250_dw: Check the data->pclk when get apb_pclk
It should check the data->pclk, not data->clk when get apb_pclk.

Fixes: c8ed99d4f6a8("serial: 8250_dw: Add support for deferred probing")
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31 15:43:52 +02:00
Andy Shevchenko
5db4f7f80d Revert "tty/serial/8250: use mctrl_gpio helpers"
Serial console is broken in v4.8-rcX. Mika and I independently bisected down to
commit 4ef03d3287 ("tty/serial/8250: use mctrl_gpio helpers").

Since neither author nor anyone else didn't propose a solution we better revert
it for now.

This reverts commit 4ef03d3287.

Link: https://lkml.kernel.org/r/20160809130229.GN1729@lahna.fi.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-31 15:36:01 +02:00
Arnd Bergmann
87a713c8ff 8250/fintek: rename IRQ_MODE macro
A bugfix for the fintek driver required defining some macros, but
one of them clashes with a system header on ARM:

drivers/tty/serial/8250/8250_fintek.c:34:0: error: "IRQ_MODE" redefined [-Werror]
 #define IRQ_MODE 0x70

In file included from /git/arm-soc/arch/arm/include/asm/ptrace.h:13:0,
                 from /git/arm-soc/arch/arm/include/asm/irqflags.h:6,
                 from /git/arm-soc/include/linux/irqflags.h:15,
                 from /git/arm-soc/arch/arm/include/asm/bitops.h:27,
                 from /git/arm-soc/include/linux/bitops.h:36,
                 from /git/arm-soc/include/linux/kernel.h:10,
                 from /git/arm-soc/include/linux/list.h:8,
                 from /git/arm-soc/include/linux/module.h:9,
                 from /git/arm-soc/drivers/tty/serial/8250/8250_fintek.c:11:
arch/arm/include/uapi/asm/ptrace.h:55:0: note: this is the location of the previous definition

This renames the newly introduced 'IRQ_MODE' macro to FINTEK_IRQ_MODE.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 4da22f1418 ("serial: 8250_fintek: fix the mismatched IRQ mode")
Link: https://patchwork.kernel.org/patch/9200119/
Acked-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com>
Acked-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-18 18:16:13 +02:00
Masahiro Yamada
755dd8aa12 serial: 8250_ingenic: drop #if conditional surrounding earlycon code
The #if defined(CONFIG_SERIAL_EARLYCON) && !defined(MODULE)
conditional has been added to the OF_EARLYCON_DECLARE() define.

The same conditional can be dropped from 8250_ingenic.c because
the unused symbols will be marked as __maybe_unsed.
Also, the Kconfig dependency can become much simpler.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-25 14:31:04 -07:00
Masahiro Yamada
ae73975f19 serial: 8250_mtk: drop !defined(MODULE) conditional
The !defined(MODULE) conditional has been added to the
OF_EARLYCON_DECLARE() define.

This commit partially reverts commit 3f5921a60f ("serial:
8250/mediatek: fix building with SERIAL_8250=m").

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-25 14:31:04 -07:00
Masahiro Yamada
68b780598d serial: 8250_uniphier: drop !defined(MODULE) conditional
The !defined(MODULE) conditional has been added to the
OF_EARLYCON_DECLARE() define.

Now we can revert commit a2d3ea2f23 ("serial: 8250/uniphier:
fix modular build").

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-25 14:31:04 -07:00
Yegor Yefremov
4ef03d3287 tty/serial/8250: use mctrl_gpio helpers
This patch permits the usage for GPIOs to control
the CTS/RTS/DTR/DSR/DCD/RI signals.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-25 14:30:42 -07:00
Yegor Yefremov
36fd95b17e tty/serial/8250: make UART_MCR register access consistent
Introduce serial8250_out_MCR() and serial8250_in_MCR() routines, that
replace following calls:

serial_out(port, UART_MCR, val)
serial_port_out(up, UART_MCR, val)
serial_in(port, UART_MCR)

This patch is needed in order to integrate reading/writing of MCR
signals via SERIAL_MCTRL_GPIO infrastructure later.

Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-25 14:30:42 -07:00
Chuah, Kim Tatt
692aa19056 serial: 8250_mid: Read RX buffer on RX DMA timeout for DNV
In DNV, when RX DMA is used and number of bytes received is less than
transfer size, only RX DMA timeout interrupt is sent. When this happens,
read the RX buffer.

Signed-off-by: Chuah, Kim Tatt <kim.tatt.chuah@intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-25 14:30:42 -07:00
Chuah, Kim Tatt
fd9e516d83 serial: 8250_dma: Export serial8250_rx_dma_flush()
Export serial8250_rx_dma_flush() for use by SOC UART drivers.

Signed-off-by: Chuah, Kim Tatt <kim.tatt.chuah@intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-25 14:30:42 -07:00
Chuah, Kim Tatt
c6f82787a5 dmaengine: hsu: Export hsu_dma_get_status()
To allow other code to safely read DMA Channel Status Register (where
the register attribute for Channel Error, Descriptor Time Out &
Descriptor Done fields are read-clear), export hsu_dma_get_status().
hsu_dma_irq() is renamed to hsu_dma_do_irq() and requires Status
Register value to be passed in.

Signed-off-by: Chuah, Kim Tatt <kim.tatt.chuah@intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-25 14:30:42 -07:00
Matthew Leach
d03516df83 tty: serial: 8250: add CON_CONSDEV to flags
When using the 8250 as a boot console and the main console results in
messages being printed twice.  The console framework will only
unregister boot consoles if a new console is registered with the
CON_CONSDEV flag set.

Set this flag for the univ8250 console to prevent double-registration.

Signed-off-by: Matthew Leach <matthew.leach@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-25 14:05:13 -07:00
Masahiro Yamada
8d6d544cfb serial: 8250_uniphier: add COMPILE_TEST option
Add COMPILE_TEST for the compilation test coverage.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-25 13:55:35 -07:00
Alexandr Petrenko
55c368cb76 8250_pci: Adds support for the WCH CH355 4S card
Adds support for the WCH CH355 4S card in the 8250 serial driver.

Signed-off-by: Alexandr Petrenko <petrenkoas83@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-25 13:50:53 -07:00
Ji-Ze Hong (Peter Hong)
4da22f1418 serial: 8250_fintek: fix the mismatched IRQ mode
Some BIOS only use _OSI("Linux") to distinguish between Linux & Windows.
Apply Level/Low to UART trigger mode if Windows, Edge/High mode otherwise.
But since 2.6.23 the mainline kernel no longer returns true for
_OSI(“Linux”).

The default IRQ0~15 trigger mode in Linux is Edge/High mode without
ACPI MADT override. It mismatches IRQ mode and makes UART malfunctional on
such motherboard.

This patch will check the current IRQ mode and apply correct mode to UART.

The following link is F81216AD spec PDF:
http://html.alldatasheet.com/html-pdf/257956/FINTEK/F81216AD/5569/
25/F81216AD.html

LDN0~3
	70h: IRQ channel & Mode register
		Bit 6~5	:
			00	: Active low level mode
			01	: Active high edge mode
		Bit 4	: Sharing Flag (0: not share/1: share)
		Bit 3~0 : IRQ channel

Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-25 13:50:53 -07:00
Kefeng Wang
01e4d27355 serial: 8250_early: Add earlycon support for Synopsys DesignWare ABP UART
Some board like Hisilicon D02 uses Synopsys DesignWare ABP UART, declare an
OF early console for it, so early console device can be enabled with comand
line "earlycon"(without option) via the "stdout-path" property in device-tree.

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Tested-by: Jon Mason <jon.mason@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-25 09:12:55 -07:00
Jiri Slaby
17b2720b11 tty: 8250, remove shadow and unused variables
The compiler complains about variables that are set, but never used:
* intX variables in exar_handle_irq
  drivers/tty/serial/8250/8250_port.c:1864:34: warning: variable ‘int3’ set but not used [-Wunused-but-set-variable]
* val variable in pci_quatech_wqopr
  drivers/tty/serial/8250/8250_pci.c:1139:10: warning: variable ‘val’ set but not used [-Wunused-but-set-variable]

And about a shadow variable:
* tmout in wait_for_xmitr is defined twice with the same type. Both of
  them are also initialized before use.

Remove all of them.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Matt Schulte <matts@commtech-fastcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-25 09:04:48 -07:00
Jiri Slaby
934014d522 tty: 8250, kill DEBUG_INTR
Convert DEBUG_INTR to pr_debug:
* defined semantics (DEBUG, DYNAMIC_DEBUG)
* KERN_DEBUG level instead of KERN_DEFAULT
* emit __func__ and \n
* verified 'fmt' even when !DEBUG

I wonder if anybody ever used that or whether we should just drop the
lines.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-25 08:56:30 -07:00
Jiri Slaby
b0f8aed2cd tty: 8250, drop unused members from struct old_serial_port
hub6 and irqflags from struct old_serial_port are nowhere set. Drop
them from the structure and replace the reads by zeros.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-25 08:56:30 -07:00
Linus Torvalds
e10abc629f TTY and Serial driver update for 4.7-rc1
Here's the large TTY and Serial driver update for 4.7-rc1.
 
 A few new serial drivers are added here, and Peter has fixed a bunch of
 long-standing bugs in the tty layer and serial drivers as normal.  Full
 details in the shortlog.
 
 All of these have been in linux-next for a while with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iEYEABECAAYFAlc/0/oACgkQMUfUDdst+ynzyQCgsa54VNijdAzU6AA5HEfqmf2M
 cGMAn1boH7hUWlAbJmzzihx4JASoGjYW
 =V5VH
 -----END PGP SIGNATURE-----

Merge tag 'tty-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty and serial driver updates from Greg KH:
 "Here's the large TTY and Serial driver update for 4.7-rc1.

  A few new serial drivers are added here, and Peter has fixed a bunch
  of long-standing bugs in the tty layer and serial drivers as normal.
  Full details in the shortlog.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (88 commits)
  MAINTAINERS: 8250: remove website reference
  serial: core: Fix port mutex assert if lockdep disabled
  serial: 8250_dw: fix wrong logic in dw8250_check_lcr()
  tty: vt, finish looping on duplicate
  tty: vt, return error when con_startup fails
  QE-UART: add "fsl,t1040-ucc-uart" to of_device_id
  serial: mctrl_gpio: Drop support for out1-gpios and out2-gpios
  serial: 8250dw: Add device HID for future AMD UART controller
  Fix OpenSSH pty regression on close
  serial: mctrl_gpio: add IRQ locking
  serial: 8250: Integrate Fintek into 8250_base
  serial: mps2-uart: add support for early console
  serial: mps2-uart: add MPS2 UART driver
  dt-bindings: document the MPS2 UART bindings
  serial: sirf: Use generic uart-has-rtscts DT property
  serial: sirf: Introduce helper variable struct device_node *np
  serial: mxs-auart: Use generic uart-has-rtscts DT property
  serial: imx: Use generic uart-has-rtscts DT property
  doc: DT: Add Generic Serial Device Tree Bindings
  serial: 8250: of: Make tegra_serial_handle_break() static
  ...
2016-05-20 20:57:27 -07:00
Linus Torvalds
a0d3c7c5c0 dmaengine updates for 4.7
This time round the update brings in following changes:
 
  - New tegra driver for ADMA device
  - Support for Xilinx AXI Direct Memory Access Engine and Xilinx AXI Central
    Direct Memory Access Engine and few updates to this driver.
  - New cyclic capability to sun6i and few updates.
  - Slave-sg support in bcm2835.
  - Updates to many drivers like designware, hsu, mv_xor, pxa, edma,
    qcom_hidma & bam.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJXPVb9AAoJEHwUBw8lI4NHnDQP/AtUYBTI8XD68iGh5eCTEtwO
 3dNgUmOvIAIl0ZtVKex3b7j2S52IN7EDv44QmsmvMHgjvaupUsZ/HeIHgoI37y39
 /qoRkyiG75ht68BrNjKcpJLsOyxaAUT1tMyf/bYXlDW8O7qEPtRDhuvUB+i+s3RX
 ljNOQXH2WaQTJrNeZxkvbp92iGiu3j7AKyCh9MJ4gnF4y2oA1bFp++QpH5qcBOTp
 0nccs7pgDQhw2nzHmhYbEmvgcKPrPQi+67U7eIed7n7wiThAIXIEbZl6AYk9kFaK
 gSa4/N3fwnZc9TFR5O6qdanvsYdW4JC1P5Ydm0opExo3lgtMckQ3sGKFIwTG8eU4
 YiyQE1uVHRqT82zxPCecTF+I0Y4g68oCJURrHED6kxKGA5a8ojU04aGebXDiNKlp
 FEDceEC5ch7ZPw8CCTola+TYpf9Vni3g7OkrdkPY9cX/aDXDROghTCg9jgPJ2aL/
 oai5axc5gQMEFzHPaEwFp45tgXw7IvIzaqYHmiWE11fsRbGUSB2HAwBXytI9ReC0
 XTMBvc08YvisbIpIR29T0R5cerzdDuK9bXxYHHHOeUFg0t8R8UGaP1UxEQCVmLsT
 AIrHupoccPJ7IAn0h6mShtZ2yzBfj3rU4tEMJR/Oj/VvjW3gKbbZ5XVi92fOurBs
 xjn9uBBZ/Pt9hgprwlmY
 =0Sy7
 -----END PGP SIGNATURE-----

Merge tag 'dmaengine-4.7-rc1' of git://git.infradead.org/users/vkoul/slave-dma

Pull dmaengine updates from Vinod Koul:
 "This time round the update brings in following changes:

   - new tegra driver for ADMA device

   - support for Xilinx AXI Direct Memory Access Engine and Xilinx AXI
     Central Direct Memory Access Engine and few updates to this driver

   - new cyclic capability to sun6i and few updates

   - slave-sg support in bcm2835

   - updates to many drivers like designware, hsu, mv_xor, pxa, edma,
     qcom_hidma & bam"

* tag 'dmaengine-4.7-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (84 commits)
  dmaengine: ioatdma: disable relaxed ordering for ioatdma
  dmaengine: of_dma: approximate an average distribution
  dmaengine: core: Use IS_ENABLED() instead of checking for built-in or module
  dmaengine: edma: Re-evaluate errors when ccerr is triggered w/o error event
  dmaengine: qcom_hidma: add support for object hierarchy
  dmaengine: qcom_hidma: add debugfs hooks
  dmaengine: qcom_hidma: implement lower level hardware interface
  dmaengine: vdma: Add clock support
  Documentation: DT: vdma: Add clock support for dmas
  dmaengine: vdma: Add config structure to differentiate dmas
  MAINTAINERS: Update Tegra DMA maintainers
  dmaengine: tegra-adma: Add support for Tegra210 ADMA
  Documentation: DT: Add binding documentation for NVIDIA ADMA
  dmaengine: vdma: Add Support for Xilinx AXI Central Direct Memory Access Engine
  Documentation: DT: vdma: update binding doc for AXI CDMA
  dmaengine: vdma: Add Support for Xilinx AXI Direct Memory Access Engine
  Documentation: DT: vdma: update binding doc for AXI DMA
  dmaengine: vdma: Rename xilinx_vdma_ prefix to xilinx_dma
  dmaengine: slave means at least one of DMA_SLAVE, DMA_CYCLIC
  dmaengine: mv_xor: Allow selecting mv_xor for mvebu only compatible SoC
  ...
2016-05-19 11:47:18 -07:00
Kefeng Wang
6550be9f62 serial: 8250_dw: fix wrong logic in dw8250_check_lcr()
Commit cdcea058e5 ("serial: 8250_dw: Avoid serial_outx code duplicate
with new dw8250_check_lcr()") introduce a wrong logic when write val to
LCR reg. When CONFIG_64BIT enabled, __raw_writeq is used unconditionally.

The __raw_readq/__raw_writeq is introduced by commit bca2092d78 ("serial:
8250_dw: Use 64-bit access for OCTEON.") for OCTEON.

So for 64BIT && !PORT_OCTEON, we better to use coincident write function.

Fixes: cdcea058e510("serial: 8250_dw: Avoid serial_outx code duplicate with new dw8250_check_lcr()")
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-03 16:10:38 -07:00
Wang Hongcheng
204e986d91 serial: 8250dw: Add device HID for future AMD UART controller
Add device HID AMDI0020 to match the AMD ACPI Vendor ID (AMDI) as
registered in http://www.uefi.org/acpi_id_list, and the UART
controller on future AMD paltform will use the HID instead of AMD0020.

Signed-off-by: Wang Hongcheng <annie.wang@amd.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-05-01 13:22:54 -07:00
Ricardo Ribalda Delgado
fa01e2ca9f serial: 8250: Integrate Fintek into 8250_base
The 8250_fintek driver advertises as the PNP0501 driver; however this
conflicts with the standard 16550A uart PNP0501. The conflict causes
the 8250_fintek driver to load with _every_ PNP0501, but never probe,
and causing the entire 8250 driver stack to unload if the 8250_fintek
driver is unloaded (modprobe doesn't know that 8250_pnp rather than
8250_fintek claimed the resource).

This patch merges the Fintek driver into 8250_base. On autoconfig_16550
the device is probed to verify if it is a FINTEK device or not.

This custom probing can be disabled completely via configuration. When a
Fintek device is not probed it will behave as a standard 16550A device,
with no RS485 capabilities.

Reported-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Reviewed-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30 09:26:55 -07:00
Thierry Reding
28264eb6c3 serial: 8250: of: Make tegra_serial_handle_break() static
This function is not used outside the file, so it can be static.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30 09:26:55 -07:00
Peter Hurley
d1f981506b serial: omap8250: Terminate rx dma only for flushes
DMA completed normally does not require termination; only terminate
paused rx dma stemming from rx dma flush.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30 09:26:55 -07:00
Peter Hurley
33d9b8b23a serial: 8250: Extract IIR logic steering from rx dma
Using fake IIR values to perform rx dma operations unnecessarily
conflates separate operations, stopping in-progress dma with starting
new dma.

Introduce serial8250_rx_dma_flush() to handle stopping in-progress dma
[omap8250 already has equivalent omap_8250_rx_dma_flush()].
Replace rx_dma(UART_IIR_RX_TIMEOUT) with the equivalent *_rx_dma_flush(),
and rx_dma(0) with the equivalent *_rx_dma(). Handle IIR steering
in the irq handler with handle_rx_dma() helper.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30 09:26:55 -07:00
Peter Hurley
b74fdd23d8 serial: omap8250: Simplify rx dma completion interface
Extract the operation (restarting new rx dma) performed when error
argument is true.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30 09:26:55 -07:00
Peter Hurley
ed183ee689 serial: omap8250: Drop rx buffer sync
commit 27c310c5c3 ("serial: 8250_dma: no need to sync RX buffer")
notes the RX DMA buffer is allocated from DMA coherent memory, and
thus does not need sync'd for each transaction. The same is true
for OMAP RX DMA.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30 09:26:55 -07:00
Peter Hurley
ddedfd82bc serial: 8250: Validate dmaengine tx chan meets requirements
8250 dma support requires the dmaegine driver support terminate.
Query slave caps to determine if necessary commands/properties are
supported; disable dma if not.

Note this means dmaengine driver must support slave caps reporting
as well.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30 09:26:55 -07:00
Peter Hurley
ec5a11a91e serial: 8250: Validate dmaengine rx chan meets requirements
8250 dma support requires the dmaengine driver support error-free
pause/terminate and better-than-descriptor residue granularity. Query
slave caps to determine if necessary commands/properties are supported;
disable dma if not.

Note this means dmaengine driver must support slave caps reporting
as well.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30 09:26:55 -07:00
Masahiro Yamada
1681d2116c serial: 8250_uniphier: add "\n" at the end of error log
Just in case.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30 09:26:55 -07:00
Peter Hurley
9c5895057b serial: 8250: Remove unused define
HIGH_BITS_OFFSET is only used in the serial core; remove from 8250-
specific header.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30 09:26:55 -07:00
Peter Hurley
f56f0a54b0 serial: omap8250: Eliminate local in omap8250_runtime_resume()
Eliminate 'loss_cntx' local variable.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30 09:26:55 -07:00
Peter Hurley
d601744dc1 serial: 8250: Reduce expr in 8250 irq handler
If !up->dma == F, then up->dma == T and can be elided from the
(up->dma && up->dma->tx_err) sub-expression.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30 09:26:55 -07:00
Peter Hurley
a86f50ed35 serial: 8250: Eliminate needless local in irq handlers
dma_err is not used other than for boolean evaluation;
substitute the actual operation directly.

Signed-off-by: Peter Hurley <peter@hurleysoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30 09:26:55 -07:00
Andy Shevchenko
ceeafb8e22 serial: 8250_mid: correct comment regarding Tangier HSU
On Intel Penwell and Tangier the HSU block (3 HSU ports) has a global register
set which is currently not used by the driver. On Tangier it has it's own PCI
device and thus available for enumeration. Since it's not a real HSU port we
just skip it and therefore put a comment in the code why we do so.

Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30 09:26:55 -07:00
Andy Shevchenko
1fc969c759 serial: 8250_mid: make module available only on X86
There is no reason to compile module on non-X86 platforms, though COMPILE_TEST
is provided for sake of what it does.

While here, set default to SERIAL_8250 that user doesn't need an explicit
option to be set and hide it from non-expert.

Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30 09:26:55 -07:00
Andy Shevchenko
dea5ac3ae4 serial: 8250_mid: include missed linux/bitops.h
The BIT() macro, that is definded in bitops.h, is used in the driver. Include
necessary header for that.

While here, reorder included headers alphabetically.

Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30 09:26:55 -07:00
Andy Shevchenko
c42850f1ae serial: 8250_mid: recognize interrupt source in handler
There is a special register that shows interrupt status by source. In
particular case the source can be a combination of DMA Tx, DMA Rx, and UART.

Read the register and call the handlers only for sources that request an
interrupt.

Fixes: 6ede6dcd87 ("serial: 8250_mid: add support for DMA engine handling from UART MMIO")
Cc: stable@vger.kernel.org
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30 09:26:55 -07:00
Andy Shevchenko
107e15fc1f serial: 8250_mid: use proper bar for DNV platform
Unlike Intel Medfield and Tangier platforms DNV uses PCI BAR0 for IO compatible
resources and BAR1 for MMIO. We need latter in a way to support DMA. Introduce
an additional field in the internal structure and pass PCI BAR based on device
ID.

Reported-by: "Lai, Poey Seng" <poey.seng.lai@intel.com>
Fixes: 6ede6dcd87 ("serial: 8250_mid: add support for DMA engine handling from UART MMIO")
Cc: stable@vger.kernel.org
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30 09:26:55 -07:00
Wan Ahmad Zainie
c2684ed7d0 serial: 8250_pci: report DCD and DSR signals as active for Bay Trail
Bay Trail UART port does not support DCD and DSR lines. The driver
shall report that these signals are permanently active. This patch
is for HSUART enumerated via PCI.

For ACPI, see commit dfd37668ea ("serial: 8250_dw: Fix get_mctrl
behaviour"). The commit also describes the possible issue if these
signals are enabled on a port without these pins.

Signed-off-by: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30 09:26:55 -07:00
Wan Ahmad Zainie
144ef5c2df serial: 8250: export get_mctrl function
Exposes get_mctrl() function so that it can be overriden with platform
specific implementation.

Signed-off-by: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30 09:26:55 -07:00
David Müller
6f210c18c1 serial: 8250_pci: fix divide error bug if baud rate is 0
Since commit 21947ba654 ("serial: 8250_pci: replace switch-case by
formula"), the 8250 driver crashes in the byt_set_termios() function
with a divide error. This is caused by the fact that a baud rate of 0 (B0)
is not handled properly. Fix it by falling back to B9600 in this case.

Signed-off-by: David Müller <d.mueller@elsoft.ch>
Fixes: 21947ba654 ("serial: 8250_pci: replace switch-case by formula")
Cc: stable@vger.kernel.org
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-28 20:07:10 -07:00
Greg Kroah-Hartman
f077b73682 Revert "serial: 8250: Add hardware dependency to RT288X option"
This reverts commit 8d2acdb9fc.

It's causing problems, and somehow I missed that Peter didn't like it at
all :(
So revert it for now until it gets sorted out.

Reported-by: Mason <slash.tmp@free.fr>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Mans Rullgard <mans@mansr.com>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: John Crispin <blogic@openwrt.org>
Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
2016-04-19 15:17:37 +09:00
Yegor Yefremov
0c66940d58 tty/serial/8250: fix RS485 half-duplex RX
When in half-duplex mode RX will be disabled before TX, but not
enabled after deactivating transmitter. This patch enables
UART_IER_RLSI and UART_IER_RDI interrupts after TX is over.

Cc: Matwey V. Kornilov <matwey@sai.msu.ru>
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Fixes: e490c9144c ("tty: Add software emulated RS485 support for 8250")
Acked-by: Matwey V. Kornilov <matwey@sai.msu.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-19 15:15:38 +09:00
Andy Shevchenko
c422025c18 dmaengine: dw: rename masters to reflect actual topology
The source and destination masters are reflecting buses or their layers to
where the different devices can be connected. The patch changes the master
names to reflect which one is related to which independently on the transfer
direction.

The outcome of the change is that the memory data width is now always limited
by a data width of the master which is dedicated to communicate to memory.

The patch will not break anything since all current users have the same data
width for all masters. Though it would be nice to revisit avr32 platforms to
check what is the actual hardware topology in use there. It seems that it has
one bus and two masters on it as stated by Table 8-2, that's why everything
works independently on the master in use. The purpose of the sequential patch
is to fix the driver for configuration of more than one bus.

The change is done in the assumption that src_master and dst_master are
reflecting a connection to the memory and peripheral correspondently on avr32
and otherwise on the rest.

Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-04-13 21:36:09 +05:30
Maciej S. Szmigiero
a95fc9c8e5 serial: 8250: describe CONFIG_SERIAL_8250_RSA
CONFIG_SERIAL_8250_RSA has waited for a long
time to have meaningful help text so let's
finally describe what this option actually does.

Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-07 16:11:14 -08:00
Mathieu OTHACEHE
c216c4ad59 tty: serial: 8250: add MOXA Smartio MUE boards support
Add support for :

- CP-102E: 2 ports RS232 PCIE card
- CP-102EL: 2 ports RS232 PCIE card
- CP-132EL: 2 ports RS422/485 PCIE card
- CP-114EL: 4 ports RS232/422/485 PCIE card
- CP-104EL-A: 4 ports RS232 PCIE card
- CP-168EL-A: 8 ports RS232 PCIE card
- CP-118EL-A: 8 ports RS232/422/485 PCIE card
- CP-118E-A: 8 ports RS422/485 PCIE card
- CP-138E-A: 8 ports RS422/485 PCIE card
- CP-134EL-A: 4 ports RS422/485 PCIE card
- CP-116E-A (A): 8 ports RS232/422/485 PCIE card
- CP-116E-A (B): 8 ports RS232/422/485 PCIE card

This patch is based on information extracted from
vendor mxupcie driver available on MOXA website.

I was able to test it on a CP-168EL-A on PC.

Signed-off-by: Mathieu OTHACEHE <m.othacehe@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-07 16:11:14 -08:00
Andy Shevchenko
013e3586d8 serial: 8250: convert drivers to use up_to_u8250p()
up_to_u8250p() casts struct uart_port * to struct uart_8250_port *. Update code
to use it instead of open coded variant.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-07 16:11:14 -08:00
Arnd Bergmann
3f5921a60f serial: 8250/mediatek: fix building with SERIAL_8250=m
The Mediatek 8250 driver has a 'bool' Kconfig symbol, but that
breaks when SERIAL_8250 is a loadable module:

drivers/tty/built-in.o: In function `mtk8250_set_termios':
:(.text+0x1bee8): undefined reference to `serial8250_do_set_termios'
:(.text+0x1bf10): undefined reference to `uart_get_baud_rate'
:(.text+0x1c09c): undefined reference to `uart_get_divisor'
drivers/tty/built-in.o: In function `mtk8250_do_pm':
:(.text+0x1c0d0): undefined reference to `serial8250_do_pm'
drivers/tty/built-in.o: In function `mtk8250_probe':
:(.text+0x1c2e4): undefined reference to `serial8250_register_8250_port'
serial/8250/8250_mtk.c:287:242: error: data definition has no type or storage class [-Werror]
serial/8250/8250_mtk.c:287:122: error: 'mtk8250_platform_driver_init' defined but not used [-Werror=unused-function]

This changes the symbol to a 'tristate', so the dependency on
SERIAL_8250 also works when that is set to 'm'.
To actually build the driver, we also need to include <linux/module.h>.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-07 16:11:14 -08:00
Arnd Bergmann
7d774fb8ca serial: 8250/ingenic: fix building with SERIAL_8250=m
The Ingenic 8250 driver has a 'bool' Kconfig symbol, but that
breaks when SERIAL_8250 is a loadable module:

drivers/tty/built-in.o: In function `ingenic_uart_probe':
8250_ingenic.c:(.text+0x1c1a0): undefined reference to `serial8250_register_8250_port'

This changes the symbol to a 'tristate', plus a dependency on
SERIAL_8250, which makes it work again. Unlike the other
soc-specific backends, this one has no dependency on an
architecture or a platform. I'm adding a dependency on
MIPS || COMPILE_TEST as well here, to avoid showing the driver
on architectures that are not interested in it.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-07 16:11:14 -08:00
Arnd Bergmann
a2d3ea2f23 serial: 8250/uniphier: fix modular build
The newly added uniphier serial port driver fails to build as
a loadable module when the base 8250 driver is built-in and
its console support enabled:

ERROR: "early_serial8250_setup" [drivers/tty/serial/8250/8250_uniphier.ko] undefined!

This changes the driver to only provide the early console support
if it is built-in itself as well.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-07 16:11:14 -08:00
Arnd Bergmann
49c56bfcb7 Revert "drivers/tty/serial: make 8250/8250_ingenic.c explicitly non-modular"
This reverts commit cafe1ac640  ("drivers/tty: make serial
8250_ingenic.c explicitly non-modular"), which attempted to remove dead
code but did not have the desired effect when the main 8250 driver was
a loadable module itself.

This would normally result in a link error, but as the entire
drivers/tty/serial/8250/ directory is only entered when CONFIG_SERIAL_8250
is set, we never notice that the driver does not get built in this
configuration.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-07 16:11:14 -08:00
Arnd Bergmann
88725e917d Revert "drivers/tty/serial: make 8250/8250_mtk.c explicitly non-modular"
This reverts commit d72d391c12 ("drivers/tty/serial: make
8250/8250_mtk.c explicitly non-modular"), which intended to remove dead
code but did not have the desired effect when the main 8250 driver was
a module itself.

This would normally result in a link error, but as the entire
drivers/tty/serial/8250/ directory is only entered when CONFIG_SERIAL_8250
is set, we never notice that the driver does not get built in this
configuration.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-07 16:11:14 -08:00
Jean Delvare
8d2acdb9fc serial: 8250: Add hardware dependency to RT288X option
Kconfig option SERIAL_8250_RT288X seems to be only relevant on MIPS
platforms, so do not present it on other architectures, unless
build-testing.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Mans Rullgard <mans@mansr.com>
Cc: Jiri Slaby <jslaby@suse.com>
Acked-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-07 16:11:14 -08:00
Andy Shevchenko
e78240152b serial: 8250_pci: all known Braswell ports are 1 channel
There is no need to have channel offset defined since all BayTrail and Braswell
ports are 1 channel. Remove unneeded definition.

While here, remove comment which has no value.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-07 16:11:14 -08:00
Andy Shevchenko
3f64b1d327 serial: 8250_pci: convert to pcim_*() API
The managed API provides a better approach to help with acquiring and releasing
resources. Besides that error handling becomes simpler.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-07 16:11:14 -08:00
Andy Shevchenko
31f28cc2a2 serial: 8250_dw: remove leftover definitions
The clocks are managed through clk-fractional-divider.c module, and thus CLK
framework takes care about it. Remove letfovers from this driver.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-07 16:11:14 -08:00