built-in.a contains the built-in object paths from the current and sub
directories.
module.order collects the module paths from the current and sub
directories.
Make their build rules look more symmetrical.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Kbuild supports the infrastructure to build host programs, but there
was no support to build userspace programs for the target architecture
(i.e. the same architecture as the kernel).
Sam Ravnborg worked on this in 2014 (https://lkml.org/lkml/2014/7/13/154),
but it was not merged. One problem at that time was, there was no good way
to know whether $(CC) can link standalone programs. In fact, pre-built
kernel.org toolchains [1] are often used for building the kernel, but they
do not provide libc.
Now, we can handle this cleanly because the compiler capability is
evaluated at the Kconfig time. If $(CC) cannot link standalone programs,
the relevant options are hidden by 'depends on CC_CAN_LINK'.
The implementation just mimics scripts/Makefile.host
The userspace programs are compiled with the same flags as the host
programs. In addition, it uses -m32 or -m64 if it is found in
$(KBUILD_CFLAGS).
This new syntax has two usecases.
- Sample programs
Several userspace programs under samples/ include UAPI headers
installed in usr/include. Most of them were previously built for
the host architecture just to use the 'hostprogs' syntax.
However, 'make headers' always works for the target architecture.
This caused the arch mismatch in cross-compiling. To fix this
distortion, sample code should be built for the target architecture.
- Bpfilter
net/bpfilter/Makefile compiles bpfilter_umh as the user mode helper,
and embeds it into the kernel. Currently, it overrides HOSTCC with
CC to use the 'hostprogs' syntax. This hack should go away.
[1]: https://mirrors.edge.kernel.org/pub/tools/crosstool/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Kbuild supports not only obj-y but also lib-y to list objects linked to
vmlinux.
The difference between them is that all the objects from obj-y are
forcibly linked to vmlinux, whereas the objects from lib-y are linked
as needed; if there is no user of a lib-y object, it is not linked.
lib-y is intended to list utility functions that may be called from all
over the place (and may be unused at all), but it is a problem for
EXPORT_SYMBOL(). Even if there is no call-site in the vmlinux, we need
to keep exported symbols for the use from loadable modules.
Commit 7f2084fa55 ("[kbuild] handle exports in lib-y objects reliably")
worked around it by linking a dummy object, lib-ksyms.o, which contains
references to all the symbols exported from lib.a in that directory.
It uses the linker script command, EXTERN. Unfortunately, the meaning of
EXTERN of ld.lld is different from that of ld.bfd. Therefore, this does
not work with LD=ld.lld (CBL issue #515).
Anyway, the build rule of lib-ksyms.o is somewhat tricky. So, I want to
get rid of it.
At first, I was thinking of accumulating lib-y objects into obj-y
(or even replacing lib-y with obj-y entirely), but the lib-y syntax
is used beyond the ordinary use in lib/ and arch/*/lib/.
Examples:
- drivers/firmware/efi/libstub/Makefile builds lib.a, which is linked
into vmlinux in the own way (arm64), or linked to the decompressor
(arm, x86).
- arch/alpha/lib/Makefile builds lib.a which is linked not only to
vmlinux, but also to bootloaders in arch/alpha/boot/Makefile.
- arch/xtensa/boot/lib/Makefile builds lib.a for use from
arch/xtensa/boot/boot-redboot/Makefile.
One more thing, adding everything to obj-y would increase the vmlinux
size of allnoconfig (or tinyconfig).
For less impact, I tweaked the destination of lib.a at the top Makefile;
when CONFIG_MODULES=y, lib.a goes to KBUILD_VMLINUX_OBJS, which is
forcibly linked to vmlinux, otherwise lib.a goes to KBUILD_VMLINUX_LIBS
as before.
The size impact for normal usecases is quite small since at lease one
symbol in every lib-y object is eventually called by someone. In case
you are intrested, here are the figures.
x86_64_defconfig:
text data bss dec hex filename
19566602 5422072 1589328 26578002 1958c52 vmlinux.before
19566932 5422104 1589328 26578364 1958dbc vmlinux.after
The case with the biggest impact is allnoconfig + CONFIG_MODULES=y.
ARCH=x86 allnoconfig + CONFIG_MODULES=y:
text data bss dec hex filename
1175162 254740 1220608 2650510 28718e vmlinux.before
1177974 254836 1220608 2653418 287cea vmlinux.after
Hopefully this is still not a big deal. The per-file trimming with the
static library is not so effective after all.
If fine-grained optimization is desired, some architectures support
CONFIG_LD_DEAD_CODE_DATA_ELIMINATION, which trims dead code per-symbol
basis. When LTO is supported in mainline, even better optimization will
be possible.
Link: https://github.com/ClangBuiltLinux/linux/issues/515
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reported-by: kbuild test robot <lkp@intel.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Nobody was opposed to raising minimum GCC version to 4.8 [1]
So, we will drop GCC <= 4.7 support sooner or later.
We always use C++ compiler for building plugins for GCC >= 4.8.
This commit drops the plugin support for GCC <= 4.7 a bit earlier,
which allows us to dump lots of code.
[1] https://lkml.org/lkml/2020/1/23/545
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
In old days, the "host-progs" syntax was used for specifying host
programs. It was renamed to the current "hostprogs-y" in 2004.
It is typically useful in scripts/Makefile because it allows Kbuild to
selectively compile host programs based on the kernel configuration.
This commit renames like follows:
always -> always-y
hostprogs-y -> hostprogs
So, scripts/Makefile will look like this:
always-$(CONFIG_BUILD_BIN2C) += ...
always-$(CONFIG_KALLSYMS) += ...
...
hostprogs := $(always-y) $(always-m)
I think this makes more sense because a host program is always a host
program, irrespective of the kernel configuration. We want to specify
which ones to compile by CONFIG options, so always-y will be handier.
The "always", "hostprogs-y", "hostprogs-m" will be kept for backward
compatibility for a while.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The built-in.a in a sub-directory is created by descending into that
directory. It does not depend on the other sub-directories. Loosen
the dependency.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Both 'obj-y += foo/' and 'obj-m += foo/' request Kbuild to visit the
sub-directory foo/, but the difference is that only the former combines
foo/built-in.a into the built-in.a of the current directory because
everything in sub-directories visited by obj-m is supposed to be modular.
So, it makes sense to create built-in.a only if that sub-directory is
reachable by the chain of obj-y. Otherwise, built-in.a will not be
linked into vmlinux anyway. For the same reason, it is pointless to
compile obj-y objects in the directory visited by obj-m.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
There are both positive and negative options about this feature.
At first, I thought it was a good idea, but actually Linus stated a
negative opinion (https://lkml.org/lkml/2019/9/29/227). I admit it
is ugly and annoying.
The baseline I'd like to keep is the compile-test of uapi headers.
(Otherwise, kernel developers have no way to ensure the correctness
of the exported headers.)
I will maintain a small build rule in usr/include/Makefile.
Remove the other header test functionality.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Since commit 394053f4a4 ("kbuild: make single targets work more
correctly"), building single targets is really slow.
Speed it up by not descending into unrelated directories.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
KBUILD_SINGLE_TARGETS does not need to contain all the targets.
Change it to keep track the targets only from the current directory
and its subdirectories.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Commit 40df759e2b ("kbuild: Fix build with binutils <= 2.19")
introduced ar-option and KBUILD_ARFLAGS to deal with old binutils.
According to Documentation/process/changes.rst, the current minimal
supported version of binutils is 2.21 so you can assume the 'D' option
is always supported. Not only GNU ar but also llvm-ar supports it.
With the 'D' option hard-coded, there is no more user of ar-option
or KBUILD_ARFLAGS.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
KBUILD_ENABLE_EXTRA_GCC_CHECKS started as a switch to add extra warning
options for GCC, but now it is a historical misnomer since we use it
also for Clang, DTC, and even kernel-doc.
Rename it to more sensible, shorter KBUILD_EXTRA_WARN.
For the backward compatibility, KBUILD_ENABLE_EXTRA_GCC_CHECKS is still
supported (but not advertised in the documentation).
I also fixed up 'make help', and updated the documentation.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Sedat Dilek <sedat.dilek@gmail.com>
Makefile.lib is included by Makefile.modfinal as well as Makefile.build.
Move modkern_cflags to Makefile.lib in order to simplify cmd_cc_o_c
in Makefile.modfinal. Move modkern_cflags as well for consistency.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Add CONFIG_ASM_MODVERSIONS. This allows to remove one if-conditional
nesting in scripts/Makefile.build.
scripts/Makefile.build is run every time Kbuild descends into a
sub-directory. So, I want to avoid $(wildcard ...) evaluation
where possible although computing $(wildcard ...) is so cheap that
it may not make measurable performance difference.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Currently, the single target build directly descends into the directory
of the target. For example,
$ make foo/bar/baz.o
... directly descends into foo/bar/.
On the other hand, the normal build usually descends one directory at
a time, i.e. descends into foo/, and then foo/bar/.
This difference causes some problems.
[1] miss subdir-asflags-y, subdir-ccflags-y in upper Makefiles
The options in subdir-{as,cc}flags-y take effect in the current
and its sub-directories. In other words, they are inherited
downward. In the example above, the single target will miss
subdir-{as,cc}flags-y if they are defined in foo/Makefile.
[2] could be built in a different directory
As Documentation/kbuild/modules.rst section 4.3 says, Kbuild can
handle files that are spread over several sub-directories.
The build rule of foo/bar/baz.o may not necessarily be specified in
foo/bar/Makefile. It might be specifies in foo/Makefile as follows:
[foo/Makefile]
obj-y := bar/baz.o
This often happens when a module is so big that its source files
are divided into sub-directories.
In this case, there is no Makefile in the foo/bar/ directory, yet
the single target descends into foo/bar/, then fails due to the
missing Makefile. You can still do 'make foo/bar/' for partial
building, but cannot do 'make foo/bar/baz.s'. I believe the single
target '%.s' is a useful feature for inspecting the compiler output.
Some modules work around this issue by putting an empty Makefile
in every sub-directory.
This commit fixes those problems by making the single target build
descend in the same way as the normal build does.
Another change is the single target build will observe the CONFIG
options. Previously, it allowed users to build the foo.o even when
the corresponding CONFIG_FOO is disabled:
obj-$(CONFIG_FOO) += foo.o
In the new behavior, the single target build will just fail and show
"No rule to make target ..." (or "Nothing to be done for ..." if the
stale object already exists, but cannot be updated).
The disadvantage of this commit is the build speed. Now that the
single target build visits every directory and parses lots of
Makefiles, it is slower than before. (But, I hope it will not be
too slow.)
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
For the single target building %.symtypes from %.S, $(a_flags) is
expanded into the _KERNEL flags even if the object is a part of a
module.
$(real-obj-m:.o=.symtypes): modkern_aflags := $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE)
... would fix the issue, but it is not nice to duplicate similar code
for every suffix.
Implement modkern_aflags in the same way as modkern_cflags.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
$(basename ...) trims the last suffix. Using it is more intuitive in
my opinion.
This pattern rule makes %.asn1.c and %.asn1.h at the same time.
Previously, the short log showed only either of them, depending on
the target file in question.
To clarify that two files are being generated by the single recipe,
I changed the log as follows:
Before:
ASN.1 crypto/asymmetric_keys/x509.asn1.c
After:
ASN.1 crypto/asymmetric_keys/x509.asn1.[ch]
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Since commit ff9b45c55b ("kbuild: modpost: read modules.order instead
of $(MODVERDIR)/*.mod"), a module is no longer built in the following
pattern:
[Makefile]
subdir-y := some-module
[some-module/Makefile]
obj-m := some-module.o
You cannot write Makefile this way in upstream because modules.order is
not correctly generated. subdir-y is used to descend to a sub-directory
that builds tools, device trees, etc.
For external modules, the modules order does not matter. So, the
Makefile above was known to work.
I believe the Makefile should be re-written as follows:
[Makefile]
obj-m := some-module/
[some-module/Makefile]
obj-m := some-module.o
However, people will have no idea if their Makefile suddenly stops
working. In fact, I received questions from multiple people.
Show a warning for a while if obj-m is specified in a Makefile visited
by subdir-y or subdir-m.
I touched the %/ rule to avoid false-positive warnings for the single
target.
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Tom Stonecypher <thomas.edwardx.stonecypher@intel.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Jan Kiszka <jan.kiszka@siemens.com>
The modules.order files in directories visited by the chain of obj-y
or obj-m are merged to the upper-level ones, and become parts of the
top-level modules.order. On the other hand, there is no need to
generate modules.order in directories visited by subdir-y or subdir-m
since they would become orphan anyway.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The current implementation of need-builtin is false-positive,
for example, in the following Makefile:
obj-m := foo/
obj-y := foo/bar/
..., where foo/built-in.a is not required.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, *.mod is created as a side-effect of obj-m.
Split out *.mod as a dedicated build rule, which allows to unify
the %.c -> %.o rule, and remove the single-used-m rule.
This also makes the incremental build of allmodconfig faster because
it saves $(NM) invocation when there is no change in the module.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The current format of *.mod is like this:
line 1: directory path to the .ko file
line 2: a list of objects linked into this module
line 3: unresolved symbols (only when CONFIG_TRIM_UNUSED_KSYMS=y)
Now that *.mod and *.ko are created in the same directory, the line 1
provides no valuable information. It can be derived by replacing the
extension .mod with .ko. In fact, nobody uses the first line any more.
Cut down the first line.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
While descending directories, Kbuild produces objects for modules,
but do not link final *.ko files; it is done in the modpost.
To keep track of modules, Kbuild creates a *.mod file in $(MODVERDIR)
for every module it is building. Some post-processing steps read the
necessary information from *.mod files. This avoids descending into
directories again. This mechanism was introduced in 2003 or so.
Later, commit 551559e13a ("kbuild: implement modules.order") added
modules.order. So, we can simply read it out to know all the modules
with directory paths. This is easier than parsing the first line of
*.mod files.
$(MODVERDIR) has a flat directory structure, that is, *.mod files
are named only with base names. This is based on the assumption that
the module name is unique across the tree. This assumption is really
fragile.
Stephen Rothwell reported a race condition caused by a module name
conflict:
https://lkml.org/lkml/2019/5/13/991
In parallel building, two different threads could write to the same
$(MODVERDIR)/*.mod simultaneously.
Non-unique module names are the source of all kind of troubles, hence
commit 3a48a91901 ("kbuild: check uniqueness of module names")
introduced a new checker script.
However, it is still fragile in the build system point of view because
this race happens before scripts/modules-check.sh is invoked. If it
happens again, the modpost will emit unclear error messages.
To fix this issue completely, create *.mod with full directory path
so that two threads never attempt to write to the same file.
$(MODVERDIR) is no longer needed.
Since modules with directory paths are listed in modules.order, Kbuild
is still able to find *.mod files without additional descending.
I also killed cmd_secanalysis; scripts/mod/sumversion.c computes MD4 hash
for modules with MODULE_VERSION(). When CONFIG_DEBUG_SECTION_MISMATCH=y,
it occurs not only in the modpost stage, but also during directory
descending, where sumversion.c may parse stale *.mod files. It would emit
'No such file or directory' warning when an object consisting a module is
renamed, or when a single-obj module is turned into a multi-obj module or
vice versa.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Currently, only the top-level modules.order drops duplicated entries.
The modules.order files in sub-directories potentially contain
duplication. To list out the paths of all modules, I want to use
modules.order instead of parsing *.mod files in $(MODVERDIR).
To achieve this, I want to rip off duplication from modules.order
of external modules too.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Removing the 'kernel/' prefix will make our life easier because we can
simply do 'cat modules.order' to get all built modules with full paths.
Currently, we parse the first line of '*.mod' files in $(MODVERDIR).
Since we have duplicated functionality here, I plan to remove MODVERDIR
entirely.
In fact, modules.order is generated also for external modules in a
broken format. It adds the 'kernel/' prefix to the absolute path of
the module, like this:
kernel//path/to/your/external/module/foo.ko
This is fine for now since modules.order is not used for external
modules. However, I want to sanitize the format everywhere towards
the goal of removing MODVERDIR.
We cannot change the format of installed module.{order,builtin}.
So, 'make modules_install' will add the 'kernel/' prefix while copying
them to $(MODLIB)/.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, $(objtree)/modules.order is touched in two places.
In the 'prepare0' rule, scripts/Makefile.build creates an empty
modules.order while processing 'obj=.'
In the 'modules' rule, the top-level Makefile overwrites it with
the correct list of modules.
While this might be a good side-effect that modules.order is made
empty every time (probably this is not intended functionality),
I personally do not like this behavior.
Create modules.order only when it is sensible to do so.
This avoids creating the following pointless files:
scripts/basic/modules.order
scripts/dtc/modules.order
scripts/gcc-plugins/modules.order
scripts/genksyms/modules.order
scripts/mod/modules.order
scripts/modules.order
scripts/selinux/genheaders/modules.order
scripts/selinux/mdp/modules.order
scripts/selinux/modules.order
Going forward, $(objtree)/modules.order lists the modules that
was built in the last successful build.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
It will be useful to control the header-test by a tristate option.
If CONFIG_FOO is a tristate option, you can write like this:
header-test-$(CONFIG_FOO) += foo.h
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Commit 25b146c5b8 ("kbuild: allow Kbuild to start from any directory")
deprecated KBUILD_SRCTREE.
It is only used in tools/testing/selftest/ to distinguish out-of-tree
build. Replace it with a new boolean flag, building_out_of_srctree.
I also replaced the conditional ($(srctree),.) because the next commit
will allow an absolute path to be used for $(srctree) even when building
in the source tree.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
header-test-y does not work with headers in sub-directories.
For example, you may want to write a Makefile, like this:
include/linux/Kbuild:
header-test-y += mtd/nand.h
This entry will create a wrapper include/linux/mtd/nand.hdrtest.c
with the following content:
#include "mtd/nand.h"
To make this work, we need to add $(srctree)/include/linux to the
header search path. It would be tedious to add ccflags-y.
Instead, we could change the *.hdrtest.c rule to wrap:
#include "nand.h"
This works for in-tree build since #include "..." searches in the
relative path from the header with this directive. For O=... build,
we need to add $(srctree)/include/linux/mtd to the header search path,
which will be even more tedious.
After all, I thought it would be handier to compile headers directly
without creating wrappers.
I added a new build rule to compile %.h into %.h.s
The target is %.h.s instead of %.h.o because it is slightly faster.
Also, as for GCC, an empty assembly is smaller than an empty object.
I wrote the build rule:
$(CC) $(c_flags) -S -o $@ -x c /dev/null -include $<
instead of:
$(CC) $(c_flags) -S -o $@ -x c $<
Both work fine with GCC, but the latter is bad for Clang.
This comes down to the difference in the -Wunused-function policy.
GCC does not warn about unused 'static inline' functions at all.
Clang does not warn about the ones in included headers, but does
about the ones in the source. So, we should handle headers as
headers, not as source files.
In fact, this has been hidden since commit abb2ea7dfd ("compiler,
clang: suppress warning for unused static inline functions"), but we
should not rely on that.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Tested-by: Jani Nikula <jani.nikula@intel.com>
Sometimes it's useful to be able to explicitly ensure certain headers
remain self-contained, i.e. that they are compilable as standalone
units, by including and/or forward declaring everything they depend on.
Add special target header-test-y where individual Makefiles can add
headers to be tested if CONFIG_HEADER_TEST is enabled. This will
generate a dummy C file per header that gets built as part of extra-y.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
- allow users to invoke 'make' out of the source tree
- refactor scripts/mkmakefile
- deprecate KBUILD_SRC, which was used to track the source tree
location for O= build.
- fix recordmcount.pl in case objdump output is localized
- turn unresolved symbols in external modules to errors from warnings
by default; pass KBUILD_MODPOST_WARN=1 to get them back to warnings
- generate modules.builtin.modinfo to collect .modinfo data from
built-in modules
- misc Makefile cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=zj9w
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- allow users to invoke 'make' out of the source tree
- refactor scripts/mkmakefile
- deprecate KBUILD_SRC, which was used to track the source tree
location for O= build.
- fix recordmcount.pl in case objdump output is localized
- turn unresolved symbols in external modules to errors from warnings
by default; pass KBUILD_MODPOST_WARN=1 to get them back to warnings
- generate modules.builtin.modinfo to collect .modinfo data from
built-in modules
- misc Makefile cleanups
* tag 'kbuild-v5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (21 commits)
.gitignore: add more all*.config patterns
moduleparam: Save information about built-in modules in separate file
Remove MODULE_ALIAS() calls that take undefined macro
.gitignore: add leading and trailing slashes to generated directories
scripts/tags.sh: fix direct execution of scripts/tags.sh
scripts: override locale from environment when running recordmcount.pl
samples: kobject: allow CONFIG_SAMPLE_KOBJECT to become y
samples: seccomp: turn CONFIG_SAMPLE_SECCOMP into a bool option
kbuild: move Documentation to vmlinux-alldirs
kbuild: move samples/ to KBUILD_VMLINUX_OBJS
modpost: make KBUILD_MODPOST_WARN also configurable for external modules
kbuild: check arch/$(SRCARCH)/include/generated before out-of-tree build
kbuild: remove unneeded dependency for include/config/kernel.release
memory: squash drivers/memory/Makefile.asm-offsets
kbuild: use $(srctree) instead of KBUILD_SRC to check out-of-tree build
kbuild: mkmakefile: generate a simple wrapper of top Makefile
kbuild: mkmakefile: do not check the generated Makefile marker
kbuild: allow Kbuild to start from any directory
kbuild: pass $(MAKECMDGOALS) to sub-make as is
kbuild: fix warning "overriding recipe for target 'Makefile'"
...
It is important that UACCESS regions are as small as possible;
furthermore the UACCESS state is not scheduled, so doing anything that
might directly call into the scheduler will cause random code to be
ran with UACCESS enabled.
Teach objtool too track UACCESS state and warn about any CALL made
while UACCESS is enabled. This very much includes the __fentry__()
and __preempt_schedule() calls.
Note that exceptions _do_ save/restore the UACCESS state, and therefore
they can drive preemption. This also means that all exception handlers
must have an otherwise redundant UACCESS disable instruction;
therefore ignore this warning for !STT_FUNC code (exception handlers
are not normal functions).
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
KBUILD_SRC was conventionally used for some different purposes:
[1] To remember the source tree path
[2] As a flag to check if sub-make is already done
[3] As a flag to check if Kbuild runs out of tree
For [1], we do not need to remember it because the top Makefile
can compute it by $(realpath $(dir $(lastword $(MAKEFILE_LIST))))
[2] has been replaced with self-commenting 'sub_make_done'.
For [3], we can distinguish in-tree/out-of-tree by comparing
$(srctree) and '.'
This commit converts [3] to prepare for the KBUILD_SRC removal.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
CC_FLAGS_FTRACE may contain trailing whitespace that interferes with
findstring.
For example, commit 6977f95e63 ("powerpc: avoid -mno-sched-epilog on
GCC 4.9 and newer") introduced a change such that on my ppc64le box,
CC_FLAGS_FTRACE="-pg -mprofile-kernel ". (Note the trailing space.)
When cmd_record_mcount is now invoked, findstring fails as the ftrace
flags were found at very end of _c_flags, without the trailing space.
_c_flags=" ... -pg -mprofile-kernel"
CC_FLAGS_FTRACE="-pg -mprofile-kernel "
^
findstring is looking for this extra space
Remove the redundant whitespaces from CC_FLAGS_FTRACE in
cmd_record_mcount to avoid this problem.
[masahiro.yamada: This issue only happens in the released versions
of GNU Make. CC_FLAGS_FTRACE will not contain the trailing space if
you use the latest GNU Make, which contains commit b90fabc8d6f3
("* NEWS: Do not insert a space during '+=' if the value is empty.") ]
Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com> (refactoring)
Fixes: 6977f95e63 ("powerpc: avoid -mno-sched-epilog on GCC 4.9 and newer").
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
scripts/Makefile.build and arch/s390/boot/Makefile use the same
command (thin archiving with symbol table creation).
Avoid the code duplication, and move it to scripts/Makefile.lib.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The genksyms source was integrated into the kernel tree in 2003.
I do not expect anybody still using the external /sbin/genksyms.
Kbuild does not need to provide the ability to override GENKSYMS.
Let's remove the GENKSYMS variable, and use the hardcoded path.
Since it occurred in the pre-git era, I attached the commit message
in case somebody is interested in the historical background.
| Author: Kai Germaschewski <kai@tp1.ruhr-uni-bochum.de>
| Date: Wed Feb 19 04:17:28 2003 -0600
|
| kbuild: [PATCH] put genksyms in scripts dir
|
| This puts genksyms into scripts/genksyms/.
|
| genksyms used to be maintained externally, though the only possible user
| was the kernel build. Moving it into the kernel sources makes it easier to
| keep it uptodate, like for example updating it to generate linker scripts
| directly instead of postprocessing the generated header file fragments
| with sed, as we do currently.
|
| Also, genksyms does not handle __typeof__, which needs to be fixed since
| some of the exported symbol in the kernel are defined using __typeof__.
|
| (Rusty Russell/me)
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The commands surrounded by ( ) are executed in a subshell, but in
most cases, we do not need to spawn an extra subshell.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
In Kbuild, if_changed and friends must have FORCE as a prerequisite.
Hence, $(filter-out FORCE,$^) or $(filter-out $(PHONY),$^) is a common
idiom to get the names of all the prerequisites except phony targets.
Add real-prereqs as a shorthand.
Note:
We cannot replace $(filter %.o,$^) in cmd_link_multi-m because $^ may
include auto-generated dependencies from the .*.cmd file when a single
object module is changed into a multi object module. Refer to commit
69ea912fda ("kbuild: remove unneeded link_multi_deps"). I added some
comment to avoid accidental breakage.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Rob Herring <robh@kernel.org>
The symbol table in the final archive is unneeded; the linker does not
require the symbol table after the --whole-archive option. Every object
file in the archive is included in the link anyway.
Pass thin archives from subdirectories directly to the linker, and
remove the final archiving step.
Fix up the document and comments as well.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Nicholas Piggin <npiggin@gmail.com>
part-of-module and quiet_modtag are set for the same targets.
Define quiet_modtag based on part-of-module.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
All objects in $(obj-m) are contained in $(real-obj-m) as well.
It is true composite objects are only contained in $(obj-m),
but [M] is hard-coded in quiet_cmd_link_multi-m.
This line is redundant.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
In commit 54a702f705 ("kbuild: mark $(targets) as .SECONDARY and
remove .PRECIOUS markers"), I missed one important feature of the
.SECONDARY target:
.SECONDARY with no prerequisites causes all targets to be
treated as secondary.
... which agrees with the policy of Kbuild.
Let's move it to scripts/Kbuild.include, with no prerequisites.
Note:
If an intermediate file is generated by $(call if_changed,...), you
still need to add it to "targets" so its .*.cmd file is included.
The arm/arm64 crypto files are generated by $(call cmd,shipped),
so they do not need to be added to "targets", but need to be added
to "clean-files" so "make clean" can properly clean them away.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
These three cmd_* are invoked in the $(call cmd,*) form.
Now that 'set -e' moved to the 'cmd' macro, they do not need to
explicitly give 'set -e'.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
With the change of rule_cc_o_c / rule_as_o_S in the last commit, each
command is executed in a separate subshell. Rip off unneeded semicolons.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The 'define' ... 'endef' directive is useful to confine a series of
shell commands into a single macro:
define foo
[action1]
[action2]
[action3]
endif
Each action is executed in a separate subshell.
However, rule_cc_o_c and rule_as_o_S in scripts/Makefile.build are
written as follows (with a trailing semicolon in each cmd_*):
define rule_cc_o_c
[action1] ; \
[action2] ; \
[action3] ;
endef
All shell commands are concatenated with '; \' so that it looks like
a single command from the Makefile point of view. This does not
exploit the benefits of 'define' ... 'endef' form because a single
shell command can be more simply written, like this:
rule_cc_o_c = \
[action1] ; \
[action2] ; \
[action3] ;
I guess the intention for the command concatenation was to let the
'@set -e' in if_changed_rule cover all the commands.
We can improve the readability by moving '@set -e' to the 'cmd' macro.
The combo of $(call echo-cmd,*) $(cmd_*) in rule_cc_o_c and rule_as_o_S
have been replaced with $(call cmd,*). The trailing back-slashes have
been removed.
Here is a note about the performance: the commands in rule_cc_o_c and
rule_as_o_S were previously executed all together in a single subshell,
but now each line in a separate subshell. This means Make will spawn
extra subshells [1]. I measured the build performance for
x86_64_defconfig + CONFIG_MODVERSIONS + CONFIG_TRIM_UNUSED_KSYMS
and I saw slight performance regression, but I believe code readability
and maintainability wins.
[1] Precisely, GNU Make may optimize this by executing the command
directly instead of forking a subshell, if no shell special
characters are found in the command line and omitting the subshell
will not change the behavior.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
My main motivation of this commit is to clean up scripts/Kbuild.include
and scripts/Makefile.build.
Currently, CONFIG_TRIM_UNUSED_KSYMS works with a tricky gimmick;
possibly exported symbols are detected by letting $(CPP) replace
EXPORT_SYMBOL* with a special string '=== __KSYM_*===', which is
post-processed by sed, and passed to fixdep. The extra preprocessing
is costly, and hacking cmd_and_fixdep is ugly.
I came up with a new way to find exported symbols; insert a dummy
symbol __ksym_marker_* to each potentially exported symbol. Those
dummy symbols are picked up by $(NM), post-processed by sed, then
appended to .*.cmd files. I collected the post-process part to a
new shell script scripts/gen_ksymdeps.sh for readability. The dummy
symbols are put into the .discard.* section so that the linker
script rips them off the final vmlinux or modules.
A nice side-effect is building with CONFIG_TRIM_UNUSED_KSYMS will
be much faster.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Nicolas Pitre <nico@linaro.org>
Let $(CC) compile objects into normal files *.o instead of .tmp_*.o
whether CONFIG_MODVERSIONS is enabled or not. With this, the input
file for objtool is always *.o so objtool_o can go away.
I guess the reason of using .tmp_*.o for intermediate objects was
to avoid leaving incomplete *.o file (, whose timestamp says it is
up-to-date) when the genksyms tool failed for some reasons.
It no longer matters because any targets are deleted on errors since
commit 9c2af1c737 ("kbuild: add .DELETE_ON_ERROR special target").
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Currently, fixdep writes dependencies to .*.tmp, which is renamed to
.*.cmd after everything succeeds. This is a very safe way to avoid
corrupted .*.cmd files. The if_changed_dep has carried this safety
mechanism since it was added in 2002.
If fixdep fails for some reasons or a user terminates the build while
fixdep is running, the incomplete output from the fixdep could be
troublesome.
This is my insight about some bad scenarios:
[1] If the compiler succeeds to generate *.o file, but fixdep fails
to write necessary dependencies to .*.cmd file, Make will miss
to rebuild the object when headers or CONFIG options are changed.
In this case, fixdep should not generate .*.cmd file at all so
that 'arg-check' will surely trigger the rebuild of the object.
[2] A partially constructed .*.cmd file may not be a syntactically
correct makefile. The next time Make runs, it would include it,
then fail to parse it. Once this happens, 'make clean' is be the
only way to fix it.
In fact, [1] is no longer a problem since commit 9c2af1c737 ("kbuild:
add .DELETE_ON_ERROR special target"). Make deletes a target file on
any failure in its recipe. Because fixdep is a part of the recipe of
*.o target, if it fails, the *.o is deleted anyway. However, I am a
bit worried about the slight possibility of [2].
So, here is a solution. Let fixdep directly write to a .*.cmd file,
but allow makefiles to include it only when its corresponding target
exists.
This effectively reverts commit 2982c95357 ("kbuild: remove redundant
$(wildcard ...) for cmd_files calculation"), and commit 00d78ab2ba
("kbuild: remove dead code in cmd_files calculation in top Makefile")
because now we must check the presence of targets.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Since retpoline capable compilers are widely available, make
CONFIG_RETPOLINE hard depend on the compiler capability.
Break the build when CONFIG_RETPOLINE is enabled and the compiler does not
support it. Emit an error message in that case:
"arch/x86/Makefile:226: *** You are building kernel with non-retpoline
compiler, please update your compiler.. Stop."
[dwmw: Fail the build with non-retpoline compiler]
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Borislav Petkov <bp@suse.de>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: <srinivas.eeda@oracle.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/cca0cb20-f9e2-4094-840b-fb0f8810cd34@default
- optimize kallsyms slightly
- remove check for old CFLAGS usage
- add some compiler flags unconditionally instead of evaluating
$(call cc-option,...)
- fix variable shadowing in host tools
- refactor scripts/mkmakefile
- refactor various makefiles
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=jM4E
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- optimize kallsyms slightly
- remove check for old CFLAGS usage
- add some compiler flags unconditionally instead of evaluating
$(call cc-option,...)
- fix variable shadowing in host tools
- refactor scripts/mkmakefile
- refactor various makefiles
* tag 'kbuild-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
modpost: Create macro to avoid variable shadowing
ASN.1: Remove unnecessary shadowed local variable
kbuild: use 'else ifeq' for checksrc to improve readability
kbuild: remove unneeded link_multi_deps
kbuild: add -Wno-unused-but-set-variable flag unconditionally
kbuild: add -Wdeclaration-after-statement flag unconditionally
kbuild: add -Wno-pointer-sign flag unconditionally
modpost: remove leftover symbol prefix handling for module device table
kbuild: simplify command line creation in scripts/mkmakefile
kbuild: do not pass $(objtree) to scripts/mkmakefile
kbuild: remove user ID check in scripts/mkmakefile
kbuild: remove VERSION and PATCHLEVEL from $(objtree)/Makefile
kbuild: add --include-dir flag only for out-of-tree build
kbuild: remove dead code in cmd_files calculation in top Makefile
kbuild: hide most of targets when running config or mixed targets
kbuild: remove old check for CFLAGS use
kbuild: prefix Makefile.dtbinst path with $(srctree) unconditionally
kallsyms: remove left-over Blackfin code
kallsyms: reduce size a little on 64-bit
'ifeq ... else ifeq ... endif' notation is supported by GNU Make 3.81
or later, which is the requirement for building the kernel since
commit 37d69ee308 ("docs: bump minimal GNU Make version to 3.81").
Use it to improve the readability.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Since commit c8589d1e9e ("kbuild: handle multi-objs dependency
appropriately"), $^ really represents all the prerequisite of the
composite object being built.
Hence, $(filter %.o,$^) contains all the objects to link together,
which is much simpler than link_multi_deps calculation.
Please note $(filter-out FORCE,$^) does not work here. When a single
object module is turned into a multi object module, $^ will contain
header files that were previously included for building the single
object, and recorded in the .*.cmd file. To filter out such headers,
$(filter %.o,$^) should be used here.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
When building to record the mcount locations the kernel uses
KBUILD_CFLAGS but not KBUILD_CPPFLAGS. This means it lacks
-Qunused-arguments when building with clang, resulting in a lot of
noisy warnings.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This check has been here for more than a decade since
commit 0c53c8e6eb ("kbuild: check for wrong use of CFLAGS").
Enough time for migration has passed.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Commit cafa0010cd ("Raise the minimum required gcc version to 4.6")
bumped the minimum GCC version to 4.6 for all architectures.
This effectively reverts commit da541b2002 ("objtool: Skip unreachable
warnings for GCC 4.4 and older"), which was a workaround for GCC 4.4 or
older.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: linux-kbuild@vger.kernel.org
Link: https://lkml.kernel.org/r/1535341183-19994-1-git-send-email-yamada.masahiro@socionext.com
Commit a0f97e06a4 ("kbuild: enable 'make CFLAGS=...' to add
additional options to CC") renamed CFLAGS to KBUILD_CFLAGS.
Commit 222d394d30 ("kbuild: enable 'make AFLAGS=...' to add
additional options to AS") renamed AFLAGS to KBUILD_AFLAGS.
Commit 06c5040cdb ("kbuild: enable 'make CPPFLAGS=...' to add
additional options to CPP") renamed CPPFLAGS to KBUILD_CPPFLAGS.
For some reason, LDFLAGS was not renamed.
Using a well-known variable like LDFLAGS may result in accidental
override of the variable.
Kbuild generally uses KBUILD_ prefixed variables for the internally
appended options, so here is one more conversion to sanitize the
naming convention.
I did not touch Makefiles under tools/ since the tools build system
is a different world.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Since commit 0fbe9a245c ("microblaze: add endianness options to
LDFLAGS instead of LD"), you cannot build the kernel for microblaze
with CONFIG_DYNAMIC_FTRACE.
Fixes: 0fbe9a245c ("microblaze: add endianness options to LDFLAGS instead of LD")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
- Restructure of lockdep and latency tracers
This is the biggest change. Joel Fernandes restructured the hooks
from irqs and preemption disabling and enabling. He got rid of
a lot of the preprocessor #ifdef mess that they caused.
He turned both lockdep and the latency tracers to use trace events
inserted in the preempt/irqs disabling paths. But unfortunately,
these started to cause issues in corner cases. Thus, parts of the
code was reverted back to where lockde and the latency tracers
just get called directly (without using the trace events).
But because the original change cleaned up the code very nicely
we kept that, as well as the trace events for preempt and irqs
disabling, but they are limited to not being called in NMIs.
- Have trace events use SRCU for "rcu idle" calls. This was required
for the preempt/irqs off trace events. But it also had to not
allow them to be called in NMI context. Waiting till Paul makes
an NMI safe SRCU API.
- New notrace SRCU API to allow trace events to use SRCU.
- Addition of mcount-nop option support
- SPDX headers replacing GPL templates.
- Various other fixes and clean ups.
- Some fixes are marked for stable, but were not fully tested
before the merge window opened.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCW3ruhRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qiM7AP47NhYdSnCFCRUJfrt6PovXmQtuCHt3
c3QMoGGdvzh9YAEAqcSXwh7uLhpHUp1LjMAPkXdZVwNddf4zJQ1zyxQ+EAU=
=vgEr
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- Restructure of lockdep and latency tracers
This is the biggest change. Joel Fernandes restructured the hooks
from irqs and preemption disabling and enabling. He got rid of a lot
of the preprocessor #ifdef mess that they caused.
He turned both lockdep and the latency tracers to use trace events
inserted in the preempt/irqs disabling paths. But unfortunately,
these started to cause issues in corner cases. Thus, parts of the
code was reverted back to where lockdep and the latency tracers just
get called directly (without using the trace events). But because the
original change cleaned up the code very nicely we kept that, as well
as the trace events for preempt and irqs disabling, but they are
limited to not being called in NMIs.
- Have trace events use SRCU for "rcu idle" calls. This was required
for the preempt/irqs off trace events. But it also had to not allow
them to be called in NMI context. Waiting till Paul makes an NMI safe
SRCU API.
- New notrace SRCU API to allow trace events to use SRCU.
- Addition of mcount-nop option support
- SPDX headers replacing GPL templates.
- Various other fixes and clean ups.
- Some fixes are marked for stable, but were not fully tested before
the merge window opened.
* tag 'trace-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (44 commits)
tracing: Fix SPDX format headers to use C++ style comments
tracing: Add SPDX License format tags to tracing files
tracing: Add SPDX License format to bpf_trace.c
blktrace: Add SPDX License format header
s390/ftrace: Add -mfentry and -mnop-mcount support
tracing: Add -mcount-nop option support
tracing: Avoid calling cc-option -mrecord-mcount for every Makefile
tracing: Handle CC_FLAGS_FTRACE more accurately
Uprobe: Additional argument arch_uprobe to uprobe_write_opcode()
Uprobes: Simplify uprobe_register() body
tracepoints: Free early tracepoints after RCU is initialized
uprobes: Use synchronize_rcu() not synchronize_sched()
tracing: Fix synchronizing to event changes with tracepoint_synchronize_unregister()
ftrace: Remove unused pointer ftrace_swapper_pid
tracing: More reverting of "tracing: Centralize preemptirq tracepoints and unify their usage"
tracing/irqsoff: Handle preempt_count for different configs
tracing: Partial revert of "tracing: Centralize preemptirq tracepoints and unify their usage"
tracing: irqsoff: Account for additional preempt_disable
trace: Use rcu_dereference_raw for hooks from trace-event subsystem
tracing/kprobes: Fix within_notrace_func() to check only notrace functions
...
Currently if CONFIG_FTRACE_MCOUNT_RECORD is enabled -mrecord-mcount
compiler flag support is tested for every Makefile.
Top 4 cc-option usages:
511 -mrecord-mcount
11 -fno-stack-protector
9 -Wno-override-init
2 -fsched-pressure
To address that move cc-option from scripts/Makefile.build to top Makefile
and export CC_USING_RECORD_MCOUNT to be used in original place.
While doing that also add -mrecord-mcount to CC_FLAGS_FTRACE (if gcc
actually supports it).
Link: http://lkml.kernel.org/r/patch-2.thread-aa7b8d.git-de935bace15a.your-ad-here.call-01533557518-ext-9465@work.hours
Acked-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
The host-progs has been kept as an alias of hostprogs-y for a long time
(at least since the beginning of Git era), with the clear prompt:
Usage of host-progs is deprecated. Please replace with hostprogs-y!
Enough time for the migration has passed.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
The comment is the same as in the top-level Makefile.
Also, the comments contain typos:
- the .PHONY variable -> the PHONY variable
- se we can ... -> so we can ...
Instead of fixing the typos, just remove the duplicated comments.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Non gcc-5 builds with CONFIG_STACK_VALIDATION=y and
SKIP_STACK_VALIDATION=1 fail.
Example output:
/bin/sh: init/.tmp_main.o: Permission denied
commit 96f60dfa58 ("trace: Use -mcount-record for dynamic ftrace"),
added a mismatched endif. This causes cmd_objtool to get mistakenly
set.
Relocate endif to balance the newly added -record-mcount check.
Link: http://lkml.kernel.org/r/20180608214746.136554-1-gthelen@google.com
Fixes: 96f60dfa58 ("trace: Use -mcount-record for dynamic ftrace")
Acked-by: Andi Kleen <ak@linux.intel.com>
Tested-by: David Rientjes <rientjes@google.com>
Signed-off-by: Greg Thelen <gthelen@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
triggers. For example:
# cd /sys/kernel/debug/tracing
# echo 'snapshot' > events/ftrace/print/trigger
# echo 'cause snapshot' > trace_marker
The rest of the changes are various clean ups and also one stable fix that
was added late in the cycle.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCWxftjBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qosyAQCgmhb+/HgRYIbsKa8Q70E2pMx5A/za
4rQ37Q9PhDUJlAD/aWXfrqcMm+buAU0yY4K+eb+f2feKXWXxdZ/fuh7+nA4=
=lpXM
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"One new feature was added to ftrace, which is the trace_marker now
supports triggers. For example:
# cd /sys/kernel/debug/tracing
# echo 'snapshot' > events/ftrace/print/trigger
# echo 'cause snapshot' > trace_marker
The rest of the changes are various clean ups and also one stable fix
that was added late in the cycle"
* tag 'trace-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (21 commits)
tracing: Use match_string() instead of open coding it in trace_set_options()
branch-check: fix long->int truncation when profiling branches
ring-buffer: Fix typo in comment
ring-buffer: Fix a bunch of typos in comments
tracing/selftest: Add test to test simple snapshot trigger for trace_marker
tracing/selftest: Add test to test hist trigger between kernel event and trace_marker
tracing/selftest: Add selftests to test trace_marker histogram triggers
ftrace/selftest: Fix reset_trigger() to handle triggers with filters
ftrace/selftest: Have the reset_trigger code be a bit more careful
tracing: Document trace_marker triggers
tracing: Allow histogram triggers to access ftrace internal events
tracing: Prevent further users of zero size static arrays in trace events
tracing: Have zero size length in filter logic be full string
tracing: Add trigger file for trace_markers tracefs/ftrace/print
tracing: Do not show filter file for ftrace internal events
tracing: Add brackets in ftrace event dynamic arrays
tracing: Have event_trace_init() called by trace_init_tracefs()
tracing: Add __find_event_file() to find event files without restrictions
tracing: Do not reference event data in post call triggers
tracepoints: Fix the descriptions of tracepoint_probe_register{_prio}
...
gcc 5 supports a new -mcount-record option to generate ftrace
tables directly. This avoids the need to run record_mcount
manually.
Use this option when available.
So far doesn't use -mcount-nop, which also exists now.
This is needed to make ftrace work with LTO because the
normal record-mcount script doesn't run over the link
time output.
It should also improve build times slightly in the general
case.
Link: http://lkml.kernel.org/r/20171127213423.27218-12-andi@firstfloor.org
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX was selected by BLACKFIN, METAG.
They were removed by commit 4ba66a9760 ("arch: remove blackfin port"),
commit bb6fb6dfcc ("metag: Remove arch/metag/"), respectively.
No more architecture enables CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX.
Clean up the rest of scripts, and remove the Kconfig entry.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX was selected by BLACKFIN, METAG.
They were removed by commit 4ba66a9760 ("arch: remove blackfin port"),
commit bb6fb6dfcc ("metag: Remove arch/metag/"), respectively.
No more architecture enables CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX,
hence the -s (--symbol-prefix) option is unnecessary.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
GNU Make automatically deletes intermediate files that are updated
in a chain of pattern rules.
Example 1) %.dtb.o <- %.dtb.S <- %.dtb <- %.dts
Example 2) %.o <- %.c <- %.c_shipped
A couple of makefiles mark such targets as .PRECIOUS to prevent Make
from deleting them, but the correct way is to use .SECONDARY.
.SECONDARY
Prerequisites of this special target are treated as intermediate
files but are never automatically deleted.
.PRECIOUS
When make is interrupted during execution, it may delete the target
file it is updating if the file was modified since make started.
If you mark the file as precious, make will never delete the file
if interrupted.
Both can avoid deletion of intermediate files, but the difference is
the behavior when Make is interrupted; .SECONDARY deletes the target,
but .PRECIOUS does not.
The use of .PRECIOUS is relatively rare since we do not want to keep
partially constructed (possibly corrupted) targets.
Another difference is that .PRECIOUS works with pattern rules whereas
.SECONDARY does not.
.PRECIOUS: $(obj)/%.lex.c
works, but
.SECONDARY: $(obj)/%.lex.c
has no effect. However, for the reason above, I do not want to use
.PRECIOUS which could cause obscure build breakage.
The targets specified as .SECONDARY must be explicit. $(targets)
contains all targets that need to include .*.cmd files. So, the
intermediates you want to keep are mostly in there. Therefore, mark
$(targets) as .SECONDARY. It means primary targets are also marked
as .SECONDARY, but I do not see any drawback for this.
I replaced some .SECONDARY / .PRECIOUS markers with 'targets'. This
will make Kbuild search for non-existing .*.cmd files, but this is
not a noticeable performance issue.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Frank Rowand <frowand.list@gmail.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Our convention is to distinguish file types by suffixes with a period
as a separator.
*-asn1.[ch] is a different pattern from other generated sources such
as *.lex.c, *.tab.[ch], *.dtb.S, etc. More confusing, files with
'-asn1.[ch]' are generated files, but '_asn1.[ch]' are checked-in
files:
net/netfilter/nf_conntrack_h323_asn1.c
include/linux/netfilter/nf_conntrack_h323_asn1.h
include/linux/sunrpc/gss_asn1.h
Rename generated files to *.asn1.[ch] for consistency.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Another common pattern that consists of chained commands is to compile
a DTB as binary data into the kernel image or a module. It is used in
several places in the source tree. Support it in the core Makefile.
$(call if_changed,dt_S_dtb) is more suitable than $(call cmd,dt_S_dtb)
in case cmd_dt_S_dtb is changed in the future.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Frank Rowand <frowand.list@gmail.com>
Files generated by if_changed* must be added to 'targets' to include
*.cmd files. Otherwise, they would be regenerated every time.
The build system automatically adds objects to 'targets' where
appropriate, such as obj-y, extra-y, etc. but does nothing for
intermediate files. So, each Makefile needs to add them by itself.
There are some common cases where objects are generated by chained
rules. Lexers and parsers are compiled like follows:
%.lex.o <- %.lex.c <- %.l
%.tab.o <- %.tab.c <- %.y
They are common patterns, so it is reasonable to take care of them
in the core Makefile instead of requiring each Makefile to do so.
At this moment, you cannot delete 'target += zconf.lex.c' in the
Kconfig Makefile because zconf.lex.c is included from zconf.tab.c
instead of being compiled separately. It should be deleted after
Kconfig is more refactored.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Frank Rowand <frowand.list@gmail.com>
With the incremental linking entirely dropped, we can simplify
the Makefile.
While I am here, I renamed cmd_link_o_target to cmd_ar_builtin.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
When built-in.o was incrementally linked with 'ld -r', the section
mismatch analysis for the individual built-in.o was possible when
CONFIG_DEBUG_SECTION_MISMATCH was enabled.
With the migration to the thin archive, built-in.a (former, built-in.o)
is no longer an ELF file. So, the modpost does nothing useful.
scripts/mod/modpost.c just checks the header to bail out, as follows:
/* Is this a valid ELF file? */
if ((hdr->e_ident[EI_MAG0] != ELFMAG0) ||
(hdr->e_ident[EI_MAG1] != ELFMAG1) ||
(hdr->e_ident[EI_MAG2] != ELFMAG2) ||
(hdr->e_ident[EI_MAG3] != ELFMAG3)) {
/* Not an ELF file - silently ignore it */
return 0;
}
We have the full analysis in the final link stage anyway, so we would
not miss the section mismatching.
I do not see a good reason to require extra linking only for the
purpose of the per-directory analysis. Just get rid of this part.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
In Kbuild, Makefiles can add the same object to obj-y multiple
times. So,
obj-y += foo.o
obj-y += foo.o
is fine.
However, this is not true when the same object is added multiple
times via composite objects. For example,
obj-y += foo.o bar.o
foo-objs := foo-bar-common.o foo-only.o
bar-objs := foo-bar-common.o bar-only.o
causes build error because two instances of foo-bar-common.o are
linked into the vmlinux.
Makefiles tend to invent ugly work-around, for example
- lib/zstd/Makefile
- drivers/net/ethernet/cavium/liquidio/Makefile
The technique used in Kbuild to avoid the multiple definition error
is to use $(filter $(obj-y), $^). Here, $^ lists the names of all
the prerequisites with duplicated names removed.
By replacing it with $(filter $(real-obj-y), $^) we can do likewise
for composite objects. For built-in objects, we do not need to keep
the composite object structure. We can simply expand them, and link
$(real-obj-y) to built-in.a.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
When I was refactoring Makefiles, I stupidly mistook 'real-obj-y' for
'real-objs-y' over and over again. Finally, I decide to rename it to
'real-obj-y'. This is consistent with 'obj-y', 'subdir-obj-y'.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Just a cosmetic change to put related code close together.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Cao jin <caoj.fnst@cn.fujitsu.com>
modname can be calculated much more simply. If modname-multi is
empty, it is a single-used object. So, modname = $(basetarget).
Otherwise, modname = $(modname-multi).
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Incremental linking is gone, so rename built-in.o to built-in.a, which
is the usual extension for archive files.
This patch does two things, first is a simple search/replace:
git grep -l 'built-in\.o' | xargs sed -i 's/built-in\.o/built-in\.a/g'
The second is to invert nesting of nested text manipulations to avoid
filtering built-in.a out from libs-y2:
-libs-y2 := $(filter-out %.a, $(patsubst %/, %/built-in.a, $(libs-y)))
+libs-y2 := $(patsubst %/, %/built-in.a, $(filter-out %.a, $(libs-y)))
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This removes the old `ld -r` incremental link option, which has not
been selected by any architecture since June 2017.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
* Use BREs where EREs aren't necessary.
* Pass -E instead of -r to use EREs. This will be standardized in the
next POSIX revision[0]. GNU sed supports this since 4.2 (May 2009),
and busybox since 1.22.0 (Jan 2014).
* Use the [:space:] character class instead of ` \t` in bracket
expressions. In bracket expressions, POSIX says that <backslash> loses
its special meaning, so a conforming implementation cannot expand \t
to <tab>[1].
* In BREs, use interval expressions (\{n,m\}) instead of non-standard
features like \+ and \?.
* Use a loop instead of -s flag.
There are still plenty of other cases of non-standard sed invocations
(use of ERE features in BREs, in-place editing), but this fixes some
core ones.
[0] http://austingroupbugs.net/view.php?id=528
[1] http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap09.html#tag_09_03_05
Signed-off-by: Michael Forney <forney@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Disable retpoline validation in objtool if your compiler sucks, and otherwise
select the validation stuff for CONFIG_RETPOLINE=y (most builds would already
have it set due to ORC).
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
David allowed retpolines in .init.text, except for modules, which will
trip up objtool retpoline validation, fix that.
Requested-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
David requested a objtool validation pass for CONFIG_RETPOLINE=y enabled
builds, where it validates no unannotated indirect jumps or calls are
left.
Add an additional .discard.retpoline_safe section to allow annotating
the few indirect sites that are required and safe.
Requested-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull x86 pti bits and fixes from Thomas Gleixner:
"This last update contains:
- An objtool fix to prevent a segfault with the gold linker by
changing the invocation order. That's not just for gold, it's a
general robustness improvement.
- An improved error message for objtool which spares tearing hairs.
- Make KASAN fail loudly if there is not enough memory instead of
oopsing at some random place later
- RSB fill on context switch to prevent RSB underflow and speculation
through other units.
- Make the retpoline/RSB functionality work reliably for both Intel
and AMD
- Add retpoline to the module version magic so mismatch can be
detected
- A small (non-fix) update for cpufeatures which prevents cpu feature
clashing for the upcoming extra mitigation bits to ease
backporting"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
module: Add retpoline tag to VERMAGIC
x86/cpufeature: Move processor tracing out of scattered features
objtool: Improve error message for bad file argument
objtool: Fix seg fault with gold linker
x86/retpoline: Add LFENCE to the retpoline/RSB filling RSB macros
x86/retpoline: Fill RSB on context switch for affected CPUs
x86/kasan: Panic if there is not enough memory to boot
Objtool segfaults when the gold linker is used with
CONFIG_MODVERSIONS=y and CONFIG_UNWINDER_ORC=y.
With CONFIG_MODVERSIONS=y, the .o file gets passed to the linker before
being passed to objtool. The gold linker seems to strip unused ELF
symbols by default, which confuses objtool and causes the seg fault when
it's trying to generate ORC metadata.
Objtool should really be running immediately after GCC anyway, without a
linker call in between. Change the makefile ordering so that objtool is
called before the linker.
Reported-and-tested-by: Markus <M4rkusXXL@web.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: ee9f8fce99 ("x86/unwind: Add the ORC unwinder")
Link: http://lkml.kernel.org/r/355f04da33581f4a3bf82e5b512973624a1e23a2.1516025651.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
- Use pwd instead of /bin/pwd for portability
- Clean up Makefiles
- Fix ld-option for clang
- Fix malloc'ed data size in Kconfig
- Fix parallel building along with coccicheck
- Fix a minor issue of package building
- Prompt to use "rpm-pkg" instead of "rpm"
- Clean up *.i and *.lst patterns by "make clean"
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=a2Td
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- use 'pwd' instead of '/bin/pwd' for portability
- clean up Makefiles
- fix ld-option for clang
- fix malloc'ed data size in Kconfig
- fix parallel building along with coccicheck
- fix a minor issue of package building
- prompt to use "rpm-pkg" instead of "rpm"
- clean up *.i and *.lst patterns by "make clean"
* tag 'kbuild-v4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: drop $(extra-y) from real-objs-y
kbuild: clean up *.i and *.lst patterns by make clean
kbuild: rpm: prompt to use "rpm-pkg" if "rpm" target is used
kbuild: pkg: use --transform option to prefix paths in tar
coccinelle: fix parallel build with CHECK=scripts/coccicheck
kconfig/symbol.c: use correct pointer type argument for sizeof
kbuild: Set KBUILD_CFLAGS before incl. arch Makefile
kbuild: remove all dummy assignments to obj-
kbuild: create built-in.o automatically if parent directory wants it
kbuild: /bin/pwd -> pwd
a new "Co-Developed-by" tag described by Greg, and a build enhancement from
Willy to generate docs warnings during a kernel build (but only when
additional warnings have been requested in general).
-----BEGIN PGP SIGNATURE-----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=ydAe
-----END PGP SIGNATURE-----
Merge tag 'docs-4.15-2' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"A few late-arriving docs updates that have no real reason to wait.
There's a new "Co-Developed-by" tag described by Greg, and a build
enhancement from Willy to generate docs warnings during a kernel build
(but only when additional warnings have been requested in general)"
* tag 'docs-4.15-2' of git://git.lwn.net/linux:
Add optional check for bad kernel-doc comments
Documentation: fix profile= options in kernel-parameters.txt
documentation/svga.txt: update outdated file
kokr/memory-barriers.txt: Fix typo in paring example
kokr/memory-barriers/txt: Replace uses of "transitive"
Documentation/process: add Co-Developed-by: tag for patches with multiple authors
Implement a '-none' output mode for kernel-doc which will only output
warning messages, and suppresses the warning message about there being
no kernel-doc in the file.
If the build has requested additional warnings, automatically check all
.c files. This patch does not check .h files. Enabling the warning
by default would add about 1300 warnings, so it's default off for now.
People who care can use this to check they didn't break the docs and
maybe we'll get all the warnings fixed and be able to enable this check
by default in the future.
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
"obj-y += foo/" syntax requires Kbuild to visit the "foo" subdirectory
and link built-in.o from that directory. This means foo/Makefile is
responsible for creating built-in.o even if there is no object to
link (in this case, built-in.o is an empty archive).
We have had several fixups like commit 4b024242e8 ("kbuild: Fix
linking error built-in.o no such file or directory"), then ended up
with a complex condition as follows:
ifneq ($(strip $(obj-y) $(obj-m) $(obj-) $(subdir-m) $(lib-target)),)
builtin-target := $(obj)/built-in.o
endif
We still have more cases not covered by the above, so we need to add
obj- := dummy.o
in several places just for creating empty built-in.o.
A key point is, the parent Makefile knows whether built-in.o is needed
or not. If a subdirectory needs to create built-in.o, its parent can
tell the fact when descending.
If non-empty $(need-builtin) flag is passed from the parent, built-in.o
should be created. $(obj-y) should be still checked to support the
single target "%/". All of ugly tricks will go away.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
One of the most remarkable improvements in this cycle is, Kbuild is
now able to cache the result of shell commands. Some variables are
expensive to compute, for example, $(call cc-option,...) invokes the
compiler. It is not efficient to redo this computation every time,
even when we are not actually building anything. Kbuild creates a
hidden file ".cache.mk" that contains invoked shell commands and
their results. The speed-up should be noticeable.
Summary:
- Fix arch build issues (hexagon, sh)
- Clean up various Makefiles and scripts
- Fix wrong usage of {CFLAGS,LDFLAGS}_MODULE in arch Makefiles
- Cache variables that are expensive to compute
- Improve cc-ldopton and ld-option for Clang
- Optimize output directory creation
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=zIdO
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
"One of the most remarkable improvements in this cycle is, Kbuild is
now able to cache the result of shell commands. Some variables are
expensive to compute, for example, $(call cc-option,...) invokes the
compiler. It is not efficient to redo this computation every time,
even when we are not actually building anything. Kbuild creates a
hidden file ".cache.mk" that contains invoked shell commands and their
results. The speed-up should be noticeable.
Summary:
- Fix arch build issues (hexagon, sh)
- Clean up various Makefiles and scripts
- Fix wrong usage of {CFLAGS,LDFLAGS}_MODULE in arch Makefiles
- Cache variables that are expensive to compute
- Improve cc-ldopton and ld-option for Clang
- Optimize output directory creation"
* tag 'kbuild-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits)
kbuild: move coccicheck help from scripts/Makefile.help to top Makefile
sh: decompressor: add shipped files to .gitignore
frv: .gitignore: ignore vmlinux.lds
selinux: remove unnecessary assignment to subdir-
kbuild: specify FORCE in Makefile.headersinst as .PHONY target
kbuild: remove redundant mkdir from ./Kbuild
kbuild: optimize object directory creation for incremental build
kbuild: create object directories simpler and faster
kbuild: filter-out PHONY targets from "targets"
kbuild: remove redundant $(wildcard ...) for cmd_files calculation
kbuild: create directory for make cache only when necessary
sh: select KBUILD_DEFCONFIG depending on ARCH
kbuild: fix linker feature test macros when cross compiling with Clang
kbuild: shrink .cache.mk when it exceeds 1000 lines
kbuild: do not call cc-option before KBUILD_CFLAGS initialization
kbuild: Cache a few more calls to the compiler
kbuild: Add a cache for generated variables
kbuild: add forward declaration of default target to Makefile.asm-generic
kbuild: remove KBUILD_SUBDIR_ASFLAGS and KBUILD_SUBDIR_CCFLAGS
hexagon/kbuild: replace CFLAGS_MODULE with KBUILD_CFLAGS_MODULE
...
The previous commit largely optimized the object directory creation.
We can optimize it more for incremental build.
There are already *.cmd files in the output directory. The existing
*.cmd files have been picked up by $(wildcard ...). Obviously,
directories containing them exist too, so we can skip "mkdir -p".
With this, Kbuild runs almost zero "mkdir -p" in incremental building.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
For the out-of-tree build, scripts/Makefile.build creates output
directories, but this operation is not efficient.
scripts/Makefile.lib calculates obj-dirs as follows:
obj-dirs := $(dir $(multi-objs) $(obj-y))
Please notice $(sort ...) is not used here. Usually the result is
as many "./" as objects here.
For a lot of duplicated paths, the following command is invoked.
_dummy := $(foreach d,$(obj-dirs), $(shell [ -d $(d) ] || mkdir -p $(d)))
Then, the costly shell command is run over and over again.
I see many points for optimization:
[1] Use $(sort ...) to cut down duplicated paths before passing them
to system call
[2] Use single $(shell ...) instead of repeating it with $(foreach ...)
This will reduce forking.
[3] We can calculate obj-dirs more simply. Most of objects are already
accumulated in $(targets). So, $(dir $(targets)) is fine and more
comprehensive.
I also removed ugly code in arch/x86/entry/vdso/Makefile. This is now
really unnecessary.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
The variable "targets" contains object paths for which existing .*.cmd
files should be included.
scripts/Makefile.build automatically adds $(MAKECMDGOALS) to "targets"
as follows:
targets += $(extra-y) $(MAKECMDGOALS) $(always)
The $(MAKECMDGOALS) is a PHONY target in several places. PHONY targets
never create .*.cmd files.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
I do not see any reason why $(wildcard ...) needs to be called twice
for computing cmd_files. Remove the first one.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
For some odd historical reason, we preprocessed the linker scripts with
"-C", which keeps comments around. That makes no sense, since the
comments are not meaningful for the build anyway.
And it actually breaks things, since linker scripts can't have C++ style
"//" comments in them, so keeping comments after preprocessing now
limits us in odd and surprising ways in our header files for no good
reason.
The -C option goes back to pre-git and pre-bitkeeper times, but seems to
have been historically used (along with "-traditional") for some
odd-ball architectures (ia64, MIPS and SH). It probably didn't matter
back then either, but might possibly have been used to minimize the
difference between the original file and the pre-processed result.
The reason for this may be lost in time, but let's not perpetuate it
only because we can't remember why we did this crazy thing.
This was triggered by the recent addition of SPDX lines to the source
tree, where people apparently were confused about why header files
couldn't use the C++ comment format.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rename the unwinder config options from:
CONFIG_ORC_UNWINDER
CONFIG_FRAME_POINTER_UNWINDER
CONFIG_GUESS_UNWINDER
to:
CONFIG_UNWINDER_ORC
CONFIG_UNWINDER_FRAME_POINTER
CONFIG_UNWINDER_GUESS
... in order to give them a more logical config namespace.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/73972fc7e2762e91912c6b9584582703d6f1b8cc.1507924831.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The kbuild bot occasionally reports warnings like:
drivers/scsi/pcmcia/aha152x_core.o: warning: objtool: seldo_run()+0x130: unreachable instruction
These warnings are always with GCC 4.4. That version of GCC sometimes
places unreachable instructions after calls to noreturn functions.
The unreachable warnings aren't very important anyway. Just ignore them
for old versions of GCC.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/bc89b807d965b98ec18a0bb94f96a594bd58f2f2.1506551639.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull x86 asm updates from Ingo Molnar:
- Introduce the ORC unwinder, which can be enabled via
CONFIG_ORC_UNWINDER=y.
The ORC unwinder is a lightweight, Linux kernel specific debuginfo
implementation, which aims to be DWARF done right for unwinding.
Objtool is used to generate the ORC unwinder tables during build, so
the data format is flexible and kernel internal: there's no
dependency on debuginfo created by an external toolchain.
The ORC unwinder is almost two orders of magnitude faster than the
(out of tree) DWARF unwinder - which is important for perf call graph
profiling. It is also significantly simpler and is coded defensively:
there has not been a single ORC related kernel crash so far, even
with early versions. (knock on wood!)
But the main advantage is that enabling the ORC unwinder allows
CONFIG_FRAME_POINTERS to be turned off - which speeds up the kernel
measurably:
With frame pointers disabled, GCC does not have to add frame pointer
instrumentation code to every function in the kernel. The kernel's
.text size decreases by about 3.2%, resulting in better cache
utilization and fewer instructions executed, resulting in a broad
kernel-wide speedup. Average speedup of system calls should be
roughly in the 1-3% range - measurements by Mel Gorman [1] have shown
a speedup of 5-10% for some function execution intense workloads.
The main cost of the unwinder is that the unwinder data has to be
stored in RAM: the memory cost is 2-4MB of RAM, depending on kernel
config - which is a modest cost on modern x86 systems.
Given how young the ORC unwinder code is it's not enabled by default
- but given the performance advantages the plan is to eventually make
it the default unwinder on x86.
See Documentation/x86/orc-unwinder.txt for more details.
- Remove lguest support: its intended role was that of a temporary
proof of concept for virtualization, plus its removal will enable the
reduction (removal) of the paravirt API as well, so Rusty agreed to
its removal. (Juergen Gross)
- Clean up and fix FSGS related functionality (Andy Lutomirski)
- Clean up IO access APIs (Andy Shevchenko)
- Enhance the symbol namespace (Jiri Slaby)
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (47 commits)
objtool: Handle GCC stack pointer adjustment bug
x86/entry/64: Use ENTRY() instead of ALIGN+GLOBAL for stub32_clone()
x86/fpu/math-emu: Add ENDPROC to functions
x86/boot/64: Extract efi_pe_entry() from startup_64()
x86/boot/32: Extract efi_pe_entry() from startup_32()
x86/lguest: Remove lguest support
x86/paravirt/xen: Remove xen_patch()
objtool: Fix objtool fallthrough detection with function padding
x86/xen/64: Fix the reported SS and CS in SYSCALL
objtool: Track DRAP separately from callee-saved registers
objtool: Fix validate_branch() return codes
x86: Clarify/fix no-op barriers for text_poke_bp()
x86/switch_to/64: Rewrite FS/GS switching yet again to fix AMD CPUs
selftests/x86/fsgsbase: Test selectors 1, 2, and 3
x86/fsgsbase/64: Report FSBASE and GSBASE correctly in core dumps
x86/fsgsbase/64: Fully initialize FS and GS state in start_thread_common
x86/asm: Fix UNWIND_HINT_REGS macro for older binutils
x86/asm/32: Fix regs_get_register() on segment registers
x86/xen/64: Rearrange the SYSCALL entries
x86/asm/32: Remove a bunch of '& 0xffff' from pt_regs segment reads
...
This is a bunch of trivial fixes and cleanups.
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Add the new ORC unwinder which is enabled by CONFIG_ORC_UNWINDER=y.
It plugs into the existing x86 unwinder framework.
It relies on objtool to generate the needed .orc_unwind and
.orc_unwind_ip sections.
For more details on why ORC is used instead of DWARF, see
Documentation/x86/orc-unwinder.txt - but the short version is
that it's a simplified, fundamentally more robust debugninfo
data structure, which also allows up to two orders of magnitude
faster lookups than the DWARF unwinder - which matters to
profiling workloads like perf.
Thanks to Andy Lutomirski for the performance improvement ideas:
splitting the ORC unwind table into two parallel arrays and creating a
fast lookup table to search a subset of the unwind table.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/0a6cbfb40f8da99b7a45a1a8302dc6aef16ec812.1500938583.git.jpoimboe@redhat.com
[ Extended the changelog. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Objtool tries to silence 'unreachable instruction' warnings when it
detects gcov is enabled, because gcov produces a lot of unreachable
instructions and they don't really matter.
However, the 0-day bot is still reporting some unreachable instruction
warnings with CONFIG_GCOV_KERNEL=y on GCC 4.6.4.
As it turns out, objtool's gcov detection doesn't work with older
versions of GCC because they don't create a bunch of symbols with the
'gcov.' prefix like newer versions of GCC do.
Move the gcov check out of objtool and instead just create a new
'--no-unreachable' flag which can be passed in by the kernel Makefile
when CONFIG_GCOV_KERNEL is defined.
Also rename the 'nofp' variable to 'no_fp' for consistency with the new
'no_unreachable' variable.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 9cfffb1168 ("objtool: Skip all "unreachable instruction" warnings for gcov kernels")
Link: http://lkml.kernel.org/r/c243dc78eb2ffdabb6e927844dea39b6033cd395.1500939244.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The P option makes ar do full path name matching and can prevent ar
from discarding files with duplicate names in some cases of creating
thin archives from thin archives. The sh architecture in particular
loses some object files from its kernel/cpu/sh*/ directories without
this option.
This could be a bug in binutils ar, but the P option should not cause
any negative effects so it is safe to use to work around this with.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
It is currently impossible to see what is going on with objtool when
building, so call echo-cmd to see the actions:
gcc -Wp,-MD,arch/x86/entry/.entry_64.o.d -nostdinc -isystem ...
./tools/objtool/objtool check "arch/x86/entry/entry_64.o";
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Michal Marek <mmarek@suse.com>
Cc: linux-kbuild@vger.kernel.org
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Add rules to kbuild in order to generate LLVM assembly files with the .ll
extension when using clang.
# from c code
make CC=clang kernel/pid.ll
Signed-off-by: Vinícius Tinti <viniciustinti@gmail.com>
Signed-off-by: Behan Webster <behanw@converseincode.com>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This add the kbuild infrastructure that will allow architectures to emit
vmlinux symbol CRCs as 32-bit offsets to another location in the kernel
where the actual value is stored. This works around problems with CRCs
being mistaken for relocatable symbols on kernels that self relocate at
runtime (i.e., powerpc with CONFIG_RELOCATABLE=y)
For the kbuild side of things, this comes down to the following:
- introducing a Kconfig symbol MODULE_REL_CRCS
- adding a -R switch to genksyms to instruct it to emit the CRC symbols
as references into the .rodata section
- making modpost distinguish such references from absolute CRC symbols
by the section index (SHN_ABS)
- making kallsyms disregard non-absolute symbols with a __crc_ prefix
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull kbuild updates from Michal Marek:
- prototypes for x86 asm-exported symbols (Adam Borowski) and a warning
about missing CRCs (Nick Piggin)
- asm-exports fix for LTO (Nicolas Pitre)
- thin archives improvements (Nick Piggin)
- linker script fix for CONFIG_LD_DEAD_CODE_DATA_ELIMINATION (Nick
Piggin)
- genksyms support for __builtin_va_list keyword
- misc minor fixes
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
x86/kbuild: enable modversions for symbols exported from asm
kbuild: fix scripts/adjust_autoksyms.sh* for the no modules case
scripts/kallsyms: remove last remnants of --page-offset option
make use of make variable CURDIR instead of calling pwd
kbuild: cmd_export_list: tighten the sed script
kbuild: minor improvement for thin archives build
kbuild: modpost warn if export version crc is missing
kbuild: keep data tables through dead code elimination
kbuild: improve linker compatibility with lib-ksyms.o build
genksyms: Regenerate parser
kbuild/genksyms: handle va_list type
kbuild: thin archives for multi-y targets
kbuild: kallsyms allow 3-pass generation if symbols size has changed
When LTO is used, some ___ksymtab_string sections are seen by this sed
script, creating lines containing a single ) such as:
EXPORT(foo)
)
)
EXPORT(bar)
Let's make it so the + character is also required for any line to be
printed.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Michal Marek <mmarek@suse.com>
lib-ksyms.o is created by linking an empty input file with a linker
script containing the interesting bits. Currently the empty input file
is an archive containing nothing, however this causes the gold linker
to segfault.
I have opened a bug against gold
https://sourceware.org/bugzilla/show_bug.cgi?id=20767
However this can be worked around by assembling an empty file to link
with instead. The resulting lib-ksyms.o is slightly larger (seemingly
due to empty .text, .data, .bss setions added), but final linked
output should not be changed.
Reported-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
THIN_ARCHIVES builds archives for built-in.o targets, have it build
multi-y targets as archives as well.
This saves another ~15% of the size of intermediate artifacts in the
build tree. After this patch, the linker is only used in final link,
and special cases like vdsos.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
The CRC code for asm exports grabs the preprocessed asm, finds the
___EXPORT_SYMBOL and turns those into EXPORT_SYMBOL in a C program
that can be preprocessed and parsed to create the CRC signatures from
the type.
The existing regex matching and replacement is too strict, and doesn't
deal well with whitespace among other things. The line
" EXPORT_SYMBOL(sym)" in a .S file would not match due to initial
whitespace, for example, which resulted in x86's ___preempt_schedule
failing to get CRCs.
Reported-by: Philip Müller <philm@manjaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Allow architectures to create asm/asm-prototypes.h file that
provides C prototypes for exported asm functions, which enables
proper CRC versions to be generated for them.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reported-by: Russell King <rmk+kernel@armlinux.org.uk>
Tested-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Michal Marek <mmarek@suse.com>
ld -r is an incremental link used to create built-in.o files in build
subdirectories. It produces relocatable object files containing all
its input files, and these are are then pulled together and relocated
in the final link. Aside from the bloat, this constrains the final
link relocations, which has bitten large powerpc builds with
unresolvable relocations in the final link.
Alan Modra has recommended the kernel use thin archives for linking.
This is an alternative and means that the linker has more information
available to it when it links the kernel.
This patch enables a config option architectures can select, which
causes all built-in.o files to be built as thin archives. built-in.o
files in subdirectories do not get symbol table or index attached,
which improves speed and size. The final link pass creates a
built-in.o archive in the root output directory which includes the
symbol table and index. The linker then uses takes this file to link.
The --whole-archive linker option is required, because the linker now
has visibility to every individual object file, and it will otherwise
just completely avoid including those without external references
(consider a file with EXPORT_SYMBOL or initcall or hardware exceptions
as its only entry points). The traditional built works "by luck" as
built-in.o files are large enough that they're going to get external
references. However this optimisation is unpredictable for the kernel
(due to above external references), ineffective at culling unused, and
costly because the .o files have to be searched for references.
Superior alternatives for link-time culling should be used instead.
Build characteristics for inclink vs thinarc, on a small powerpc64le
pseries VM with a modest .config:
inclink thinarc
sizes
vmlinux 15 618 680 15 625 028
sum of all built-in.o 56 091 808 1 054 334
sum excluding root built-in.o 151 430
find -name built-in.o | xargs rm ; time make vmlinux
real 22.772s 21.143s
user 13.280s 13.430s
sys 4.310s 2.750s
- Final kernel pulled in only about 6K more, which shows how
ineffective the object file culling is.
- Build performance looks improved due to less pagecache activity.
On IO constrained systems it could be a bigger win.
- Build size saving is significant.
Side note, the toochain understands archives, so there's some tricks,
$ ar t built-in.o # list all files you linked with
$ size built-in.o # and their sizes
$ objdump -d built-in.o # disassembly (unrelocated) with filenames
Implementation by sfr, minor tweaks by npiggin.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Collect the symbols exported by anything that goes into lib.a and
add an empty object (lib-exports.o) with explicit undefs for each
of those to obj-y.
That allows to relax the rules regarding the use of exports in
lib-* objects - right now an object with export can be in lib-*
only if we are guaranteed that there always will be users in
built-in parts of the tree, otherwise it needs to be in obj-*.
As the result, we have an unholy mix of lib- and obj- in lib/Makefile
and (especially) in arch/*/lib/Makefile. Moreover, a change in
generic part of the kernel can lead to mysteriously missing exports
on some configs. With this change we don't have to worry about
that anymore.
One side effect is that built-in.o now pulls everything with exports
from the corresponding lib.a (if such exists). That's exactly what
we want for linking vmlinux and fortunately it's almost the only thing
built-in.o is used in. arch/ia64/hp/sim/boot/bootloader is the only
exception and it's easy to get rid of now - just turn everything in
arch/ia64/lib into lib-* and don't bother with arch/ia64/lib/built-in.o
anymore.
[AV: stylistic fix from Michal folded in]
Acked-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Infrastructure for building independent shared library targets.
Based on work created by the PaX Team.
Signed-off-by: Emese Revfy <re.emese@gmail.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Michal Marek <mmarek@suse.com>
This command just preprocesses .S files into .s files, so cmd_cpp_s_S
seems more suitable.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
This command just preprocesses .c files into .i files, so cmd_cpp_i_c
seems more suitable.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
The generation and postprocessing of automatic dependency rules is
duplicated in rule_cc_o_c, rule_as_o_S and if_changed_dep. Since
this is not a trivial one-liner action, it is now abstracted under
cmd_and_fixdep to simplify things and make future changes in this area
easier.
In the rule_cc_o_c and rule_as_o_S cases that means the order of some
commands has been altered, namely fixdep and related file manipulations
are executed earlier, but they didn't depend on those commands that now
execute later.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Kernel modules are partially linked object files with some undefined
symbols that are expected to be matched with EXPORT_SYMBOL() entries
from elsewhere.
Each .tmp_versions/*.mod file currently contains two line of text
separated by a newline character. The first line has the actual module
file name while the second line has a list of object files constituting
that module. Those files are parsed by modpost (scripts/mod/sumversion.c),
scripts/Makefile.modpost, scripts/Makefile.modsign, etc. Only the
modpost utility cares about the second line while the others retrieve
only the first line.
Therefore we can add a third line to record the list of undefined symbols
aka required EXPORT_SYMBOL() entries for each module into that file
without breaking anything. Like for the second line, symbols are separated
by a blank and the list is terminated with a newline character.
To avoid needless build overhead, the undefined symbols extraction is
performed only when CONFIG_TRIM_UNUSED_KSYMS is selected.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
With CONFIG_STACK_VALIDATION enabled, if the host system doesn't have
a development version of libelf installed, the build fails with errors
like:
elf.h:22:18: fatal error: gelf.h: No such file or directory compilation terminated.
Instead of failing to build, instead just print a warning and disable
stack validation.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-next@vger.kernel.org
Cc: linux@roeck-us.net
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/8c27fe00face60f42e888ddb3142c97e45223165.1457026550.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add a CONFIG_STACK_VALIDATION option which will run "objtool check" for
each .o file to ensure the validity of its stack metadata.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Bernd Petrovitsch <bernd@petrovitsch.priv.at>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Chris J Arges <chris.j.arges@canonical.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Pedro Alves <palves@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/92baab69a6bf9bc7043af0bfca9fb964a1d45546.1456719558.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This allows to write
drm-$(CONFIG_AGP) += drm_agpsupport.o
without having to handle CONFIG_AGP=y vs. CONFIG_AGP=m. Only support
this syntax for modules, since built-in code depending on something
modular cannot work and init/Makefile actually relies on the current
semantics. There are a few drivers which adapted to the current
semantics out of necessity; these are fixed to also work when the
respective subsystem is modular.
Acked-by: Peter Chen <peter.chen@freescale.com> [chipidea]
Signed-off-by: Michal Marek <mmarek@suse.com>
If the kernel is compiled with function tracer support the -pg compile option
is passed to gcc to generate extra code into the prologue of each function.
This patch replaces the "open-coded" -pg compile flag with a CC_FLAGS_FTRACE
makefile variable which architectures can override if a different option
should be used for code generation.
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Kconfig never defines CONFIG_* as 'n'.
Now obj-n is only used in firmware/Makefile and it can be
replaced with obj-. No makefile uses lib-n.
Let's rip off obj-n and lib-n.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Peter Foley <pefoley2@pefoley.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The comment in scripts/Makefile.build says as follows:
We would rather have a list of rules like
foo.o: $(foo-objs)
but that's not so easy, so we rather make all composite objects depend
on the set of all their parts
This commit makes it possible!
For example, assume a Makefile like this
obj-m = foo.o bar.o
foo-objs := foo1.o foo2.o
bar-objs := bar1.o bar2.o
Without this patch, foo.o depends on all of
foo1.o foo2.o bar1.o bar2.o.
It looks funny that foo.o is regenerated when bar1.c is updated.
Now we can handle the dependency of foo.o and bar.o separately.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
W=... provides extra gcc checks.
Having such code in scripts/Makefile.build results in the same flags
being added to KBUILD_CFLAGS multiple times becuase
scripts/Makefile.build is invoked every time Kbuild descends into
the subdirectories.
Since the top Makefile is already too cluttered, this commit moves
all of extra gcc check stuff to a new file scripts/Makefile.extrawarn,
which is included from the top Makefile.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
CC: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
When compiling kernel with clang, disable warnings which are too noisy, and
add the clang flag catch-undefined-behavior.
Signed-off-by: Jan-Simon Möller <dl9pf@gmx.de>
Signed-off-by: Behan Webster <behanw@converseincode.com>
Signed-off-by: Mark Charlebois <mcharleb@gmail.com>
Cc: PaX Team <pageexec@freemail.hu>
The asm-offset.c technique to fish data out of the assembler file
does not work with LTO. Just disable for the asm-offset.c build.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/1391846481-31491-11-git-send-email-ak@linux.intel.com
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Pass symbol-prefix to genksyms instead of arch, so that the decision
what symbol prefix to use is kept in one place.
Basically genksyms used to take a -a $ARCH argument and it used that to
determine whether to add an underscore symbol prefix. It's now changed
to take a -s $SYMBOL_PREFIX argument so that the caller decides whether
a symbol prefix is required. The build system then uses
CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX to determine whether to pass the
argument.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Add a simple ASN.1 grammar compiler. This produces a bytecode output that can
be fed to a decoder to inform the decoder how to interpret the ASN.1 stream it
is trying to parse.
Action functions can be specified in the grammar by interpolating:
({ foo })
after a type, for example:
SubjectPublicKeyInfo ::= SEQUENCE {
algorithm AlgorithmIdentifier,
subjectPublicKey BIT STRING ({ do_key_data })
}
The decoder is expected to call these after matching this type and parsing the
contents if it is a constructed type.
The grammar compiler does not currently support the SET type (though it does
support SET OF) as I can't see a good way of tracking which members have been
encountered yet without using up extra stack space.
Currently, the grammar compiler will fail if more than 256 bytes of bytecode
would be produced or more than 256 actions have been specified as it uses
8-bit jump values and action indices to keep space usage down.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
-Wmissing-field-initializers is too noisy to be useful on W=1. Let's
move it to W=2.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Usage of these flags has been deprecated for nearly 4 years by:
commit f77bf01425
Author: Sam Ravnborg <sam@neptun.(none)>
Date: Mon Oct 15 22:25:06 2007 +0200
kbuild: introduce ccflags-y, asflags-y and ldflags-y
Moreover, these flags (at least EXTRA_CFLAGS) have been documented for
command line use. By default, gmake(1) do not override command line
setting, so this is likely to result in build failure or unexpected
behavior.
Do not advertise for its usage.
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
kbuild: make KBUILD_NOCMDDEP=1 handle empty built-in.o
scripts/kallsyms.c: fix potential segfault
scripts/gen_initramfs_list.sh: Convert to a /bin/sh script
kbuild: Fix GNU make v3.80 compatibility
kbuild: Fix passing -Wno-* options to gcc 4.4+
kbuild: move scripts/basic/docproc.c to scripts/docproc.c
kbuild: Fix Makefile.asm-generic for um
kbuild: Allow to combine multiple W= levels
kbuild: Disable -Wunused-but-set-variable for gcc 4.6.0
Fix handling of backlash character in LINUX_COMPILE_BY name
kbuild: asm-generic support
kbuild: implement several W= levels
kbuild: Fix build with binutils <= 2.19
initramfs: Use KBUILD_BUILD_TIMESTAMP for generated entries
kbuild: Allow to override LINUX_COMPILE_BY and LINUX_COMPILE_HOST macros
kbuild: Drop unused LINUX_COMPILE_TIME and LINUX_COMPILE_DOMAIN macros
kbuild: Use the deterministic mode of ar
kbuild: Call gzip with -n
kbuild: move KALLSYMS_EXTRA_PASS from Kconfig to Makefile
Kconfig: improve KALLSYMS_ALL documentation
Fix up trivial conflict in Makefile
Modifications to recordmcount must be performed on all object
files to stay consistent with what the kernel code may expect.
Add the recordmcount files to the main dependencies to make sure
any change to them causes a full recompile.
Signed-off-by: Michal Marek <mmarek@suse.cz>
Link: http://lkml.kernel.org/r/20110517133646.GP13293@sepie.suse.cz
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When mcount is called in a section that ftrace will not modify it into
a nop, we want to warn about this. But not warn about this always. Now
if the user builds the kernel with the option RECORDMCOUNT_WARN=1 then
the build will warn about mcount callers that are ignored and will just
waste execution time.
Acked-by: Michal Marek <mmarek@suse.cz>
Cc: linux-kbuild@vger.kernel.org
Link: http://lkml.kernel.org/r/20110421023738.714956282@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
