Instead of adding DMI quirks for each new tablet model which uses
the ESS8316 codec, the plan is to switch to querying the same ACPI
Device-Specific-Method (DSM) as Windows uses to determine things
like speaker and mic routing.
Call the new es83xx_dsm_dump() helper which logs various basic settings
which can be queried through the ACPI DSM method on the codec ACPI device,
this is intended to help with developing a DSM based solution to replace
most DMI quirks.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
[hdegoede@redhat.com: improve commit message]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231202123946.54347-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Most of the ES83xx codec configuration is exposed in the DSDT table
and accessible via a _DSM method. Start adding basic definitions and
helpers to dump the information.
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Co-developed-by: David Yang <yangxiaohua@everest-semi.com>
Signed-off-by: David Yang <yangxiaohua@everest-semi.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231202123946.54347-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Linus Walleij <linus.walleij@linaro.org>:
This series walks over the Cirrus Logic ASoC drivers and
clean out the use of legacy GPIO numbers and legacy
GPIO APIs.
The CS4271 affects an ASoC driver for EP93xx which Nikita is
actively working on moving over to device tree, so I don't
know about that patch specifically, but I think the collision
would be max "the file was deleted".
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
Changes in v2:
- Add explicit <linux/irq.h> include in the cs35l36 driver, apparently
the driver useeed this implicitly through the <linux/gpio.h> include.
- Fix commit messages "gpios" -> "reset" on two patches.
- Test builds OK
- Link to v1: https://lore.kernel.org/r/20231129-descriptors-sound-cirrus-v1-0-31aa74425ff8@linaro.org
---
Linus Walleij (10):
ASoC: cs35l32: Drop legacy include
ASoC: cs35l33: Fix GPIO name and drop legacy include
ASoC: cs35l34: Fix GPIO name and drop legacy include
ASoC: cs35l35: Drop legacy includes
ASoC: cs35l36: Drop legacy includes
ASoC: cs4271: Convert to GPIO descriptors
ASoC: cirrus: edb93xx: Drop legacy include
ASoC: cs42l42: Drop legacy include
ASoC: cs43130: Drop legacy includes
ASoC: cs4349: Drop legacy include
arch/arm/mach-ep93xx/edb93xx.c | 32 +++++++++++++++++++++++++----
arch/arm/mach-ep93xx/vision_ep9307.c | 12 ++++++++++-
include/sound/cs4271.h | 1 -
sound/soc/cirrus/edb93xx.c | 1 -
sound/soc/codecs/cs35l32.c | 1 -
sound/soc/codecs/cs35l33.c | 4 +---
sound/soc/codecs/cs35l34.c | 4 +---
sound/soc/codecs/cs35l35.c | 2 --
sound/soc/codecs/cs35l36.c | 3 +--
sound/soc/codecs/cs4271.c | 39 ++++++++++++------------------------
sound/soc/codecs/cs42l42.c | 1 -
sound/soc/codecs/cs42l42.h | 2 +-
sound/soc/codecs/cs43130.c | 2 --
sound/soc/codecs/cs4349.c | 1 -
14 files changed, 56 insertions(+), 49 deletions(-)
---
base-commit: 267aea213ae042f779a8054401a8a5f301518605
change-id: 20231129-descriptors-sound-cirrus-522d9061808e
Best regards,
--
Linus Walleij <linus.walleij@linaro.org>
Sound machine drivers for all newer Qualcomm SoC platforms are the
exactly same, therefore it makes sense to use same machine driver for
newer platforms as well. Choice of sound topology and user-space Alsa
UCM files depends however on card driver name, which must be customized
per each board. Allow such customization by using driver match data as
sound card driver name.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231201135332.154017-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver includes the legacy GPIO API <linux/gpio.h> but
does not use any symbols from it.
Drop the include.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231201-descriptors-sound-cirrus-v2-10-ee9f9d4655eb@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver includes the legacy GPIO APIs <linux/gpio.h> and
<linux/of_gpio.h> but does not use any symbols from any of
them.
Drop the includes.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231201-descriptors-sound-cirrus-v2-9-ee9f9d4655eb@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver includes the legacy GPIO API <linux/gpio.h> but
does not use any symbols from it.
Drop the include.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231201-descriptors-sound-cirrus-v2-8-ee9f9d4655eb@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This converts the Cirrus CS4271 ASoC codec driver to use
GPIO descriptors.
It turns out that there are two in-kernel users of the platform
data passing mechanism so these are switched over as well.
One locally defined GPIO "gpio_disabled" is declared in the
state struct but completely unused in the driver, so we delete
it.
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231201-descriptors-sound-cirrus-v2-6-ee9f9d4655eb@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver includes the legacy GPIO APIs <linux/gpio.h> and
<linux/of_gpio.h> but does not use any symbols from any of
them.
Drop the includes.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231201-descriptors-sound-cirrus-v2-5-ee9f9d4655eb@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver includes the legacy GPIO APIs <linux/gpio.h> and
<linux/of_gpio.h> but does not use any symbols from any of
them.
Drop the includes.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231201-descriptors-sound-cirrus-v2-4-ee9f9d4655eb@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver includes the legacy GPIO APIs <linux/gpio.h> and
<linux/of_gpio.h> but does not use any symbols from any of
them.
Drop the includes.
Further the driver is requesting "reset-gpios" rather than
just "reset" from the GPIO framework. This is wrong because
the gpiolib core will add "-gpios" before processing the
request from e.g. device tree. Drop the suffix.
The last problem means that the optional RESET GPIO has
never been properly retrieved and used even if it existed,
but nobody noticed.
Fixes: c1124c09e1 ("ASoC: cs35l34: Initial commit of the cs35l34 CODEC driver.")
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231201-descriptors-sound-cirrus-v2-3-ee9f9d4655eb@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver includes the legacy GPIO APIs <linux/gpio.h> and
<linux/of_gpio.h> but does not use any symbols from any of
them.
Drop the includes.
Further the driver is requesting "reset-gpios" rather than
just "reset" from the GPIO framework. This is wrong because
the gpiolib core will add "-gpios" before processing the
request from e.g. device tree. Drop the suffix.
The last problem means that the optional RESET GPIO has
never been properly retrieved and used even if it existed,
but nobody noticed.
Fixes: 3333cb7187 ("ASoC: cs35l33: Initial commit of the cs35l33 CODEC driver.")
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231201-descriptors-sound-cirrus-v2-2-ee9f9d4655eb@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver includes the legacy GPIO API <linux/gpio.h> but
does not use any symbols from it.
Drop the include.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231201-descriptors-sound-cirrus-v2-1-ee9f9d4655eb@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The main aim of the series is to provide a mechanism to fallback to 'older' IPC
versions in case the desired one is missing either a firmware or topology file.
It is going to make the life of users and distributions if we are going to
start transition existing IPC3 platforms to IPC4 (CAVS2.5) and we might have
missed some topology file to convert for example.
In that case the kernel will fallback to IPC3 without audio regression.
To be able to support this we needed to change the probe sequence to know the
topology filename earlier and check if it is present in the filesystem.
No functional changes for now, the default IPC versions have not been changed.
Currently the Qualcomm Soundwire controller in its DAI startup op
allocates the Soundwire stream runtime. This works fine for existing
designs, but has limitations for stream runtimes with multiple
controllers, like upcoming Qualcomm X1E80100 SoC with four WSA8840
speakers on two Soundwire controllers.
When two Soundwire controllers are added to sound card codecs, Soundwire
startup() is called twice, one for each Soundwire controller, and second
execution overwrites what was set before. During shutdown() this causes
double free.
It is expected to have only one Soundwire stream runtime, thus it should
be allocated from SoC soundcard context startup(), not from each
Soundwire startup(). Such way will properly handle both cases: one and
two Soundwire controllers in the stream runtime.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231128165638.757665-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Newer Qualcomm SoC soundcards will need to allocate Soundwire stream
runtime in their startup op. The code will be exactly the same for all
soundcards, so add a helper for that.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231128165638.757665-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
SND_SOC_IMX_RPMSG gained a new dependency and gets selected by SND_SOC_FSL_RPMSG,
which as a result needs to have the same dependency, or produce a build failure
based on that:
WARNING: unmet direct dependencies detected for SND_SOC_IMX_RPMSG
Depends on [n]: SOUND [=y] && SND [=y] && SND_SOC [=y] && SND_IMX_SOC [=y] && RPMSG [=y] && OF [=y] && I2C [=n]
Selected by [y]:
- SND_SOC_FSL_RPMSG [=y] && SOUND [=y] && SND [=y] && SND_SOC [=y] && COMMON_CLK [=y] && RPMSG [=y] && (SND_IMX_SOC [=y] || SND_IMX_SOC [=y]=n) && SND_IMX_SOC [=y]!=n
x86_64-linux-ld: sound/soc/fsl/imx-rpmsg.o: in function `imx_rpmsg_late_probe':
imx-rpmsg.c:(.text+0x11e): undefined reference to `i2c_find_device_by_fwnode'
Fixes: f83d38def6 ("ASoC: imx-rpmsg: SND_SOC_IMX_RPMSG should depend on OF and I2C")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231129113204.2869356-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This module ID will be used for module performance automatic analysis
for different modules, module name, module ID and module instance ID
will be combined as a new generated ID for current module, this ID
will be further used by analysis tools to identify current module.
Take below case as example:
0x030006 gain.11.1
3 is module instance ID, 6 is module ID and gain.11.1 is module name.
For pipeline widget print, keep as it is.
Signed-off-by: Baofeng Tian <baofeng.tian@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231129122234.14515-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With the added exception handling support if the firmware fails to boot
up we are trying to do a panic dump from the telemetry slot. The slot
offsets would have been configured only after receiving the FW_READY
message which makes this panic dump unusable for early boot failures.
With IPC4 the DSP window offsets are at standard places unlike IPC3 where
the offsets needs to be queried from the FW_READY message.
Move the offset configuration to sof_ipc4_init from the fw_ready handler.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231129122805.10635-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If a firmware file is missing for the selected IPC type then try to switch
to other supported IPC type and check if that one can be used instead.
If for example a platform is changed to IPC4 as default version but the
given machine does not yet have the needed topology file created then we
will fall back to IPC3 which should have all the needed files.
Relocate the sof_init_environment() to be done at a later phase, in
sof_probe_continue().
This will only have changes in behavior if
CONFIG_SND_SOC_SOF_PROBE_WORK_QUEUE is enabled (Intel HDA platforms) by
not failing the module probe, but it is not going to be different case
compared to for example failed firmware booting or topology loading error.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129125327.23708-14-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Manage the ipc4_data allocation in code instead of devm since the ops_init
might be called more than once due to IPC type fallback.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129125327.23708-13-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add sof_init_environment() as a helper function to contain path and ops
initialization.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129125327.23708-12-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The core is now using the information from ipc_file_profile_base to create
the paths for the loadable files, no need to set it in here anymore.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129125327.23708-11-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The core is now using the information from ipc_file_profile_base to create
the paths for the loadable files, no need to set it in here anymore.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129125327.23708-10-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The core is now using the information from ipc_file_profile_base to create
the paths for the loadable files, no need to set it in here anymore.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129125327.23708-9-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the information stored in ipc_file_profile_base by platforms to
construct the paths, filenames that are going to be used to load the
firmware and topology files.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129125327.23708-8-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Store the default IPC type and the overrides to ipc_file_profile_base
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129125327.23708-7-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Store the default IPC type and the firmware and topology path overrides to
ipc_file_profile_base
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129125327.23708-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Store the default IPC type and the firmware and topology path overrides to
ipc_file_profile_base
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129125327.23708-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a struct sof_loadable_file_profile which can be filled by platforms
(sof-acpi-dev.c, sof-of-dev.c and sof-acpi-dev.c) to be able to use common,
generic code to handle path customization.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129125327.23708-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Relocate the machine handling functions from sof-audio.c to core.c to
maintain code separation.
While doing the move, drop the redundant
IS_ERR_OR_NULL(plat_data->pdev_mach) check from
sof_machine_unregister()
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129125327.23708-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the sof_of_machine_select() function to sof-of-dev.c file and provide
an inline stub in case of non OF builds.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20231129125327.23708-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
trace_filter_parse() allocs memory for *out and when
-ENOMEM is returned, caller function, dfsentry_trace_filter_write()
trying to freed this memory.
After this patch, the memory is freed in trace_filter_parse()
before -EINVAL returned. In caller function removed kfree(elms)
from error label
Signed-off-by: Kamil Duljas <kamil.duljas@gmail.com>
Link: https://lore.kernel.org/r/20231116220102.2097-2-kamil.duljas@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
A small update for SDW machine support:
Small fixes for sof_sdw machine driver
Support for rt722
New TGL/MTL and LNL match for new configurations
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
SOF board updates for 6.8 including few small fix and the majority is to add
generic helpers for codec, amp, BT offload, HDMI-In and DAI link generation
among various machine drivers.
Use intel_board module to generate DAI link array and update
num_links field in snd_soc_card structure.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231127152654.28204-28-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use intel_board module to generate DAI link array and update num_links
field in snd_soc_card structure.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231127152654.28204-27-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a helper function for machine drivers to initialize dai_link and
num_links of a snd_soc_card structure. Machine driver needs to
initialize sof_card_private structure in driver probe function then
board_helpers module will create entire DAI link array for this board.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231127152654.28204-26-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use intel_board module for HDMI-In DAI link initialization.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Balamurugan C <balamurugan.c@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231127152654.28204-25-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use intel_board module for HDMI-In DAI link initialization.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Balamurugan C <balamurugan.c@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231127152654.28204-24-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a helper function for machine drivers to initialize HDMI-In DAI
link.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Balamurugan C <balamurugan.c@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231127152654.28204-23-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use bit mask to handle SSP port number of HDMI-In devices to simplify
the code. No functional change in this patch.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Balamurugan C <balamurugan.c@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231127152654.28204-22-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use intel_board module for BT offload DAI link initialization.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231127152654.28204-21-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use intel_board module for BT offload DAI link initialization.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231127152654.28204-20-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use intel_board module for BT offload DAI link initialization.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20231127152654.28204-19-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
