Add support to the tc flower classifier to match based on fields in CFM
information elements like level and opcode.
tc filter add dev ens6 ingress protocol 802.1q \
flower vlan_id 698 vlan_ethtype 0x8902 cfm mdl 5 op 46 \
action drop
Signed-off-by: Zahari Doychev <zdoychev@maxlinear.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If we send two TCA_FLOWER_KEY_ENC_OPTS_GENEVE packets and their total
size is 252 bytes(key->enc_opts.len = 252) then
key->enc_opts.len = opt->length = data_len / 4 = 0 when the third
TCA_FLOWER_KEY_ENC_OPTS_GENEVE packet enters fl_set_geneve_opt. This
bypasses the next bounds check and results in an out-of-bounds.
Fixes: 0a6e77784f ("net/sched: allow flower to match tunnel options")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Link: https://lore.kernel.org/r/20230531102805.27090-1-hbh25y@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add the 'TCA_FLOWER_L2_MISS' netlink attribute that allows user space to
match on packets that encountered a layer 2 miss. The miss indication is
set as metadata in the tc skb extension by the bridge driver upon FDB or
MDB lookup miss and dissected by the flow dissector to the
'FLOW_DISSECTOR_KEY_META' key.
The use of this skb extension is guarded by the 'tc_skb_ext_tc' static
key. As such, enable / disable this key when filters that match on layer
2 miss are added / deleted.
Tested:
# cat tc_skb_ext_tc.py
#!/usr/bin/env -S drgn -s vmlinux
refcount = prog["tc_skb_ext_tc"].key.enabled.counter.value_()
print(f"tc_skb_ext_tc reference count is {refcount}")
# ./tc_skb_ext_tc.py
tc_skb_ext_tc reference count is 0
# tc filter add dev swp1 egress proto all handle 101 pref 1 flower src_mac 00:11:22:33:44:55 action drop
# tc filter add dev swp1 egress proto all handle 102 pref 2 flower src_mac 00:11:22:33:44:55 l2_miss true action drop
# tc filter add dev swp1 egress proto all handle 103 pref 3 flower src_mac 00:11:22:33:44:55 l2_miss false action drop
# ./tc_skb_ext_tc.py
tc_skb_ext_tc reference count is 2
# tc filter replace dev swp1 egress proto all handle 102 pref 2 flower src_mac 00:01:02:03:04:05 l2_miss false action drop
# ./tc_skb_ext_tc.py
tc_skb_ext_tc reference count is 2
# tc filter del dev swp1 egress proto all handle 103 pref 3 flower
# tc filter del dev swp1 egress proto all handle 102 pref 2 flower
# tc filter del dev swp1 egress proto all handle 101 pref 1 flower
# ./tc_skb_ext_tc.py
tc_skb_ext_tc reference count is 0
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When replacing a filter (i.e. 'fold' pointer is not NULL) the insertion of
new filter to idr is postponed until later in code since handle is already
provided by the user. However, the error handling code in fl_change()
always assumes that the new filter had been inserted into idr. If error
handler is reached when replacing existing filter it may remove it from idr
therefore making it unreachable for delete or dump afterwards. Fix the
issue by verifying that 'fold' argument wasn't provided by caller before
calling idr_remove().
Fixes: 08a0063df3 ("net/sched: flower: Move filter handle initialization earlier")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 32eff6bace.
Superseded by the following commit in this series.
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 08a0063df3 ("net/sched: flower: Move filter handle initialization
earlier") moved filter handle initialization but an assignment of
the handle to fnew->handle is done regardless of fold value. This is wrong
because if fold != NULL (so fold->handle == handle) no new handle is
allocated and passed handle is assigned to fnew->handle. Then if any
subsequent action in fl_change() fails then the handle value is
removed from IDR that is incorrect as we will have still valid old filter
instance with handle that is not present in IDR.
Fix this issue by moving the assignment so it is done only when passed
fold == NULL.
Prior the patch:
[root@machine tc-testing]# ./tdc.py -d enp1s0f0np0 -e 14be
Test 14be: Concurrently replace same range of 100k flower filters from 10 tc instances
exit: 123
exit: 0
RTNETLINK answers: Invalid argument
We have an error talking to the kernel
Command failed tmp/replace_6:1885
All test results:
1..1
not ok 1 14be - Concurrently replace same range of 100k flower filters from 10 tc instances
Command exited with 123, expected 0
RTNETLINK answers: Invalid argument
We have an error talking to the kernel
Command failed tmp/replace_6:1885
After the patch:
[root@machine tc-testing]# ./tdc.py -d enp1s0f0np0 -e 14be
Test 14be: Concurrently replace same range of 100k flower filters from 10 tc instances
All test results:
1..1
ok 1 14be - Concurrently replace same range of 100k flower filters from 10 tc instances
Fixes: 08a0063df3 ("net/sched: flower: Move filter handle initialization earlier")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230425140604.169881-1-ivecera@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch fixes typos in net/sched/* files.
Signed-off-by: Taichi Nishimura <awkrail01@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
To support hardware miss to tc action in actions on the flower
classifier, implement the required getting of filter actions,
and setup filter exts (actions) miss by giving it the filter's
handle and actions.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To support miss to action during hardware offload the filter's
handle is needed when setting up the actions (tcf_exts_init()),
and before offloading.
Move filter handle initialization earlier.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are currently two mechanisms for populating hardware stats:
1. Using flow_offload api to query the flow's statistics.
The api assumes that the same stats values apply to all
the flow's actions.
This assumption breaks when action drops or jumps over following
actions.
2. Using hw_action api to query specific action stats via a driver
callback method. This api assures the correct action stats for
the offloaded action, however, it does not apply to the rest of the
actions in the flow's actions array.
Extend the flow_offload stats callback to indicate that a per action
stats update is required.
Use the existing flow_offload_action api to query the action's hw stats.
In addition, currently the tc action stats utility only updates hw actions.
Reuse the existing action stats cb infrastructure to query any action
stats.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Instead of passing 6 stats related args, pass the flow_stats.
Signed-off-by: Oz Shlomo <ozsh@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Expose the necessary tc classifier functions and wire up cls_api to use
direct calls in retpoline kernels.
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for matching on L2TPv3 session ID.
Session ID can be specified only when ip proto was
set to IPPROTO_L2TP.
Example filter:
# tc filter add dev $PF1 ingress prio 1 protocol ip \
flower \
ip_proto l2tp \
l2tpv3_sid 1234 \
skip_sw \
action mirred egress redirect dev $VF1_PR
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add support for PPPoE specific fields for tc-flower.
Those fields can be provided only when protocol was set
to ETH_P_PPP_SES. Defines, dump, load and set are being done here.
Overwrite basic.n_proto only in case of PPP_IP and PPP_IPV6,
otherwise leave it as ETH_P_PPP_SES.
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
So it can be used for port range filter offloading.
Co-developed-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu>
Signed-off-by: Volodymyr Mytnyk <volodymyr.mytnyk@plvision.eu>
Signed-off-by: Maksym Glubokiy <maksym.glubokiy@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Before this patch the existence of vlan filters was conditional on the vlan
protocol being matched in the tc rule. For example, the following rule:
tc filter add dev eth1 ingress flower vlan_prio 5
was illegal because vlan protocol (e.g. 802.1q) does not appear in the rule.
Remove the above restriction by looking at the num_of_vlans filter to
allow further matching on vlan attributes. The following rule becomes
legal as a result of this commit:
tc filter add dev eth1 ingress flower num_of_vlans 1 vlan_prio 5
because having num_of_vlans==1 implies that the packet is single tagged.
Change is_vlan_key helper to look at the number of vlans in addition to
the vlan ethertype. The outcome of this change is that outer (e.g. vlan_prio)
and inner (e.g. cvlan_prio) tag vlan filters require the number of vlan
tags to be greater then 0 and 1 accordingly.
As a result of is_vlan_key change, the ethertype may be set to 0 when
matching on the number of vlans. Update fl_set_key_vlan to avoid setting
key, mask vlan_tpid for the 0 ethertype.
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These are bookkeeping parts of the new num_of_vlans filter.
Defines, dump, load and set are being done here.
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are somewhat repetitive ethertype checks in fl_set_key. Refactor
them into is_vlan_key helper function.
To make the changes clearer, avoid touching identation levels. This is
the job for the next patch in the series.
Signed-off-by: Boris Sukholitko <boris.sukholitko@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The various error paths of tc_setup_offload_action() now report specific
error messages. Remove the generic messages to avoid overwriting the
more specific ones.
Before:
# tc filter add dev dummy0 ingress pref 1 proto ip flower skip_sw dst_ip 198.51.100.1 action police rate 100Mbit burst 10000
Error: cls_flower: Failed to setup flow action.
We have an error talking to the kernel
After:
# tc filter add dev dummy0 ingress pref 1 proto ip flower skip_sw dst_ip 198.51.100.1 action police rate 100Mbit burst 10000
Error: act_police: Offload not supported when conform/exceed action is "reclassify".
We have an error talking to the kernel
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The callback is used by various actions to populate the flow action
structure prior to offload. Pass extack to this callback so that the
various actions will be able to report accurate error messages to user
space.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The verbose flag was added in commit 81c7288b17 ("sched: cls: enable
verbose logging") to avoid suppressing logging of error messages that
occur "when the rule is not to be exclusively executed by the hardware".
However, such error messages are currently suppressed when setup of flow
action fails. Take the verbose flag into account to avoid suppressing
error messages. This is done by using the extack pointer initialized by
tc_cls_common_offload_init(), which performs the necessary checks.
Before:
# tc filter add dev dummy0 ingress pref 1 proto ip flower dst_ip 198.51.100.1 action police rate 100Mbit burst 10000
# tc filter add dev dummy0 ingress pref 2 proto ip flower verbose dst_ip 198.51.100.1 action police rate 100Mbit burst 10000
After:
# tc filter add dev dummy0 ingress pref 1 proto ip flower dst_ip 198.51.100.1 action police rate 100Mbit burst 10000
# tc filter add dev dummy0 ingress pref 2 proto ip flower verbose dst_ip 198.51.100.1 action police rate 100Mbit burst 10000
Warning: cls_flower: Failed to setup flow action.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A tc flower filter matching TCA_FLOWER_KEY_VLAN_ETH_TYPE is expected to
match the L2 ethertype following the first VLAN header, as confirmed by
linked discussion with the maintainer. However, such rule also matches
packets that have additional second VLAN header, even though filter has
both eth_type and vlan_ethtype set to "ipv4". Looking at the code this
seems to be mostly an artifact of the way flower uses flow dissector.
First, even though looking at the uAPI eth_type and vlan_ethtype appear
like a distinct fields, in flower they are all mapped to the same
key->basic.n_proto. Second, flow dissector skips following VLAN header as
no keys for FLOW_DISSECTOR_KEY_CVLAN are set and eventually assigns the
value of n_proto to last parsed header. With these, such filters ignore any
headers present between first VLAN header and first "non magic"
header (ipv4 in this case) that doesn't result
FLOW_DISSECT_RET_PROTO_AGAIN.
Fix the issue by extending flow dissector VLAN key structure with new
'vlan_eth_type' field that matches first ethertype following previously
parsed VLAN header. Modify flower classifier to set the new
flow_dissector_key_vlan->vlan_eth_type with value obtained from
TCA_FLOWER_KEY_VLAN_ETH_TYPE/TCA_FLOWER_KEY_CVLAN_ETH_TYPE uAPIs.
Link: https://lore.kernel.org/all/Yjhgi48BpTGh6dig@nanopsycho/
Fixes: 9399ae9a6c ("net_sched: flower: Add vlan support")
Fixes: d64efd0926 ("net/sched: flower: Add supprt for matching on QinQ vlan headers")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Options are as follows: PDU_TYPE:QFI and they refernce to
the fields from the PDU Session Protocol. PDU Session data
is conveyed in GTP-U Extension Header.
GTP-U Extension Header is described in 3GPP TS 29.281.
PDU Session Protocol is described in 3GPP TS 38.415.
PDU_TYPE - indicates the type of the PDU Session Information (4 bits)
QFI - QoS Flow Identifier (6 bits)
# ip link add gtp_dev type gtp role sgsn
# tc qdisc add dev gtp_dev ingress
# tc filter add dev gtp_dev protocol ip parent ffff: \
flower \
enc_key_id 11 \
gtp_opts 1:8/ff:ff \
action mirred egress redirect dev eth0
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add process to validate flags of filter and actions when adding
a tc filter.
We need to prevent adding filter with flags conflicts with its actions.
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rename exts stats update functions with hw for readability.
We make this change also to update stats from hw for an action
when it is offloaded to hw as a single action.
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To improves readability, we rename offload functions with offload instead
of flow.
The term flow is related to exact matches, so we rename these functions
with offload.
We make this change to facilitate single action offload functions naming.
Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If ct rejects a flow, it removes the conntrack info from the skb.
act_ct sets the post_ct variable so the dissector will see this case
as an +tracked +invalid state, but the zone id is lost with the
conntrack info.
To restore the zone id on such cases, set the last executed zone,
via the tc control block, when passing ct, and read it back in the
dissector if there is no ct info on the skb (invalid connection).
Fixes: 7baf2429a1 ("net/sched: cls_flower add CT_FLAGS_INVALID flag support")
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
BPF layer extends the qdisc control block via struct bpf_skb_data_end
and because of that there is no more room to add variables to the
qdisc layer control block without going over the skb->cb size.
Extend the qdisc control block with a tc control block,
and move all tc related variables to there as a pre-step for
extending the tc control block with additional members.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a packet of a new flow arrives in openvswitch kernel module, it dissects
the packet and passes the extracted flow key to ovs-vswtichd daemon. If hw-
offload configuration is enabled, the daemon creates a new TC flower entry to
bypass openvswitch kernel module for the flow (TC flower can also offload flows
to NICs but this time that does not matter).
In this processing flow, I found the following issue in cases of GRE/IPIP
packets.
When ovs_flow_key_extract() in openvswitch module parses a packet of a new
GRE (or IPIP) flow received on non-tunneling vports, it extracts information
of the outer IP header for ip_proto/src_ip/dst_ip match keys.
This means ovs-vswitchd creates a TC flower entry with IP protocol/addresses
match keys whose values are those of the outer IP header. OTOH, TC flower,
which uses flow_dissector (different parser from openvswitch module), extracts
information of the inner IP header.
The following flow is an example to describe the issue in more detail.
<----------- Outer IP -----------------> <---------- Inner IP ---------->
+----------+--------------+--------------+----------+----------+----------+
| ip_proto | src_ip | dst_ip | ip_proto | src_ip | dst_ip |
| 47 (GRE) | 192.168.10.1 | 192.168.10.2 | 6 (TCP) | 10.0.0.1 | 10.0.0.2 |
+----------+--------------+--------------+----------+----------+----------+
In this case, TC flower entry and extracted information are shown as below:
- ovs-vswitchd creates TC flower entry with:
- ip_proto: 47
- src_ip: 192.168.10.1
- dst_ip: 192.168.10.2
- TC flower extracts below for IP header matches:
- ip_proto: 6
- src_ip: 10.0.0.1
- dst_ip: 10.0.0.2
Thus, GRE or IPIP packets never match the TC flower entry, as each
dissector behaves differently.
IMHO, the behavior of TC flower (flow dissector) does not look correct,
as ip_proto/src_ip/dst_ip in TC flower match means the outermost IP
header information except for GRE/IPIP cases. This patch adds a new
flow_dissector flag FLOW_DISSECTOR_F_STOP_BEFORE_ENCAP which skips
dissection of the encapsulated inner GRE/IPIP header in TC flower
classifier.
Signed-off-by: Yoshiki Komachi <komachi.yoshiki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
TC action ->init() API has 10 parameters, it becomes harder
to read. Some of them are just boolean and can be replaced
by flags. Similarly for the internal API tcf_action_init()
and tcf_exts_validate().
This patch converts them to flags and fold them into
the upper 16 bits of "flags", whose lower 16 bits are still
reserved for user-space. More specifically, the following
kernel flags are introduced:
TCA_ACT_FLAGS_POLICE replace 'name' in a few contexts, to
distinguish whether it is compatible with policer.
TCA_ACT_FLAGS_BIND replaces 'bind', to indicate whether
this action is bound to a filter.
TCA_ACT_FLAGS_REPLACE replaces 'ovr' in most contexts,
means we are replacing an existing action.
TCA_ACT_FLAGS_NO_RTNL replaces 'rtnl_held' but has the
opposite meaning, because we still hold RTNL in most
cases.
The only user-space flag TCA_ACT_FLAGS_NO_PERCPU_STATS is
untouched and still stored as before.
I have tested this patch with tdc and I do not see any
failure related to this patch.
Tested-by: Vlad Buslov <vladbu@nvidia.com>
Acked-by: Jamal Hadi Salim<jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The existing code is functionally correct: iproute2 parses the ip_flags
argument for tc-flower and really packs it as big endian into the
TCA_FLOWER_KEY_FLAGS netlink attribute. But there is a problem in the
fact that W=1 builds complain:
net/sched/cls_flower.c:1047:15: warning: cast to restricted __be32
This is because we should use the dedicated helper for obtaining a
__be32 pointer to the netlink attribute, not a u32 one. This ensures
type correctness for be32_to_cpu.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A make W=1 build complains that:
net/sched/cls_flower.c:214:20: warning: cast from restricted __be16
net/sched/cls_flower.c:214:20: warning: incorrect type in argument 1 (different base types)
net/sched/cls_flower.c:214:20: expected unsigned short [usertype] val
net/sched/cls_flower.c:214:20: got restricted __be16 [usertype] dst
This is because we use htons on struct flow_dissector_key_ports members
src and dst, which are defined as __be16, so they are already in network
byte order, not host. The byte swap function for the other direction
should have been used.
Because htons and ntohs do the same thing (either both swap, or none
does), this change has no functional effect except to silence the
warnings.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ct_state validate should not only check the mask bit and also
check mask_bit & key_bit..
For the +new+est case example, The 'new' and 'est' bits should be
set in both state_mask and state flags. Or the -new-est case also
will be reject by kernel.
When Openvswitch with two flows
ct_state=+trk+new,action=commit,forward
ct_state=+trk+est,action=forward
A packet go through the kernel and the contrack state is invalid,
The ct_state will be +trk-inv. Upcall to the ovs-vswitchd, the
finally dp action will be drop with -new-est+trk.
Fixes: 1bcc51ac07 ("net/sched: cls_flower: Reject invalid ct_state flags rules")
Fixes: 3aed8b6333 ("net/sched: cls_flower: validate ct_state for invalid and reply flags")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add invalid and reply flags validate in the fl_validate_ct_state.
This makes the checking complete if compared to ovs'
validate_ct_state().
Signed-off-by: wenxu <wenxu@ucloud.cn>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Link: https://lore.kernel.org/r/1614064315-364-1-git-send-email-wenxu@ucloud.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reject the unsupported and invalid ct_state flags of cls flower rules.
Fixes: e0ace68af2 ("net/sched: cls_flower: Add matching on conntrack info")
Signed-off-by: wenxu <wenxu@ucloud.cn>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch add the TCA_FLOWER_KEY_CT_FLAGS_INVALID flag to
match the ct_state with invalid for conntrack.
Signed-off-by: wenxu <wenxu@ucloud.cn>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Link: https://lore.kernel.org/r/1611045110-682-1-git-send-email-wenxu@ucloud.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
fl_set_enc_opt() simply checks if there are still bytes left to parse,
but this is not sufficent as syzbot seems to be able to generate
malformatted netlink messages. nla_ok() is more strict so should be
used to validate the next nlattr here.
And nla_validate_nested_deprecated() has less strict check too, it is
probably too late to switch to the strict version, but we can just
call nla_ok() too after it.
Reported-and-tested-by: syzbot+2624e3778b18fc497c92@syzkaller.appspotmail.com
Fixes: 0a6e77784f ("net/sched: allow flower to match tunnel options")
Fixes: 79b1011cb3 ("net: sched: allow flower to match erspan options")
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Xin Long <lucien.xin@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Link: https://lore.kernel.org/r/20210115185024.72298-1-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In fl_set_erspan_opt(), all bits of erspan md was set 1, as this
function is also used to set opt MASK. However, when setting for
md->u.index for opt VALUE, the rest bits of the union md->u will
be left 1. It would cause to fail the match of the whole md when
version is 1 and only index is set.
This patch is to fix by initializing with 0 before setting erspan
md->u.
Reported-by: Shuang Li <shuali@redhat.com>
Fixes: 79b1011cb3 ("net: sched: allow flower to match erspan options")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
