drm_atomic_helper_commit_duplicated_state() sets state->acquire_ctx to
the context given in the argument and leaves it in state after it
quits. The lifetime of state and context are not guaranteed to be the
same, so we shouldn't leave that pointer hanging around. This patch
resets the context to NULL to avoid any oopses.
Changes in v2:
- Added to the set
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181129150423.239081-1-sean@poorly.run
The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().
The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.
drm_fbdev_generic_setup() handles mode_config.num_connector being zero.
In that case it retries fbdev setup on the next .output_poll_changed.
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181128212713.43500-4-noralf@tronnes.org
Requested by Boris Brezillon for some vc4 fixes that are needed for future vc4 work.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Since commit "9fdd90c0f4 drm/virtio: add virtio_gpu_alloc_fence()"
fences are not allocated any more by virtio_gpu_fence_emit(). So there
is no need to pass down a reference to the fence pointer, a plain
pointer is enough now.
Convert virtio_gpu_fence_emit() and callers.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Robert Foss <robert.foss@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20181128151021.29565-2-kraxel@redhat.com
We need to handle allocation failures and bail out. While at it, tune
the allocation failures down to debug level.
syzbot injected an allocation failure and then hit this WARN_ON.
Reported-by: syzbot+eb6e5365f23c02517dda@syzkaller.appspotmail.com
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Gustavo Padovan <gustavo.padovan@collabora.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181128101033.4840-1-daniel.vetter@ffwll.ch
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlv7H/seHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGhasH/AvNibkzTAPQR7jE
r/R7NIaFUdPpaHYpLpoYIdSWkqpeWtN3q4eldJKWcpFCaE83EzDVu1PRw79rt/lm
JIYbZ2SZWbTB7d2TLEiEF2bFXr+OF8MVc1tSAsP5xTMvV6mIz7+i2xr9R0D4YrKY
ejd+ExF3HimuRf557Uey1MGsRIhedHsHjHbWjvR1MuKzvUv9nAL+1E2KJbfPXacp
LGXElCYcPXoKw+GxMS7C28idgLoEJoS/eVieRiMGsGlgEe/MuaNMU+GRLMde9lI0
c/G/4uumJTHVY7npOjuNt1+2FoLVt8oLlhPcB06R7FIwJN+TupLQifqBkIe2saT6
R6ExonQ=
=+/RR
-----END PGP SIGNATURE-----
Merge v4.20-rc4 into drm-next
Requested by Boris Brezillon for some vc4 fixes that are needed for future vc4 work.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Core Changes:
- Merge drm_info.c into drm_debugfs.c
- Complete the fake drm_crtc_commit's hw_done/flip_done sooner.
- Remove deprecated drm_obj_ref/unref functions. All drivers use get/put now.
- Decrease stack use of drm_gem_prime_mmap.
- Improve documentation for dumb callbacks.
Driver Changes:
- Add edid support to virtio.
- Wait on implicit fence in meson and sun4i.
- Add support for BGRX8888 to sun4i.
- Preparation patches for sun4i driver to start supporting linear and tiled YUV formats.
- Add support for HDMI 1.4 4k modes to meson, and support for VIC alternate timings.
- Drop custom dumb_map in vkms.
- Small fixes and cleanups to v3d.
-----BEGIN PGP SIGNATURE-----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=JNy2
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2018-11-28' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v4.21:
Core Changes:
- Merge drm_info.c into drm_debugfs.c
- Complete the fake drm_crtc_commit's hw_done/flip_done sooner.
- Remove deprecated drm_obj_ref/unref functions. All drivers use get/put now.
- Decrease stack use of drm_gem_prime_mmap.
- Improve documentation for dumb callbacks.
Driver Changes:
- Add edid support to virtio.
- Wait on implicit fence in meson and sun4i.
- Add support for BGRX8888 to sun4i.
- Preparation patches for sun4i driver to start supporting linear and tiled YUV formats.
- Add support for HDMI 1.4 4k modes to meson, and support for VIC alternate timings.
- Drop custom dumb_map in vkms.
- Small fixes and cleanups to v3d.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/151a3270-b1be-ed75-bd58-6b29d741f592@linux.intel.com
This is the same as the default drm_gem_dumb_map_offset()
implementation, except that this one missed the ban on userspace
mapping an imported dmabuf (which seems like intended common behavior
for drivers).
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181126215929.20546-1-eric@anholt.net
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The extra to_v3d_bo() calls came from copying this from the vc4
driver, which stored the cma gem object in the structs.
v2: Fix an unused var warning
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181108161654.19888-4-eric@anholt.net
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com> (v1)
This change is an attempt to handle the alternate clock for the CEA mode.
60Hz vs. 59.94Hz, 30Hz vs 29.97Hz or 24Hz vs 23.97Hz on the Amlogic Meson SoC
DRM Driver pixel clock generation.
The actual clock generation will be moved to the Common Clock framework once
all the video clock are handled by the Amlogic Meson SoC clock driver,
then these alternate timings will be handled in the same time in a cleaner
fashion.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Maxime Jourdan <mjourdan@baylibre.com>
[narmstrong: fix maybe-uninitialized warnings after applying]
Link: https://patchwork.freedesktop.org/patch/msgid/1541501675-3928-1-git-send-email-narmstrong@baylibre.com
Add the timings for the HDMI 1.4 4K modes support :
- 3840x2160@30
- 3840x2160@25
- 3840x2160@24
Since the 297000Hz pixel clock is already managed and the modes are
compatible with the HDMI 1.4 current HDMI PHY+Controller support, only
the missing timings values needs to be added.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Maxime Jourdan <mjourdan@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1541496909-19625-1-git-send-email-narmstrong@baylibre.com
Noticed while reviewing a patch from Eric. Also add a todo for the
dumb_map_offset callbacks (it should be simple to do, but piles of
work). Plus fix up vbox, because vbox.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Nicholas Mc Guire <der.herr@hofr.at>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Fabio Rafael da Rosa <fdr@pid42.net>
Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181127091921.8325-1-daniel.vetter@ffwll.ch
To prepare the introduction of tiled mode support, pass the framebuffer
format modifier to the helpers dealing with format support.
Since only linear mode is supported for now, add corresponding checks in
each helper.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-33-paul.kocialkowski@bootlin.com
Our hardware requires the pitch to be an even number when using YUV
formats with the frontend. Implement a driver-specific callback for GEM
dumb allocation that sets the pitch accordingly.
Since only the bpp is passed (and not the format), we cannot really
distinguish if this alignment is really required. Since it doesn't hurt
to align the pitch anyway, always do it.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-30-paul.kocialkowski@bootlin.com
The frontend comes with two "channels", that can be configured
independently. When used in YUV mode, the first channel (CH0) represents
the luminance component while the second channel (CH1) represents the
chrominance. In RGB mode, both have to be configured the same way.
Use variables (with the YUV terminology) for each channel's
dimensions, calculating the chroma dimensions from the luma dimensions
and the sub-sampling factors from the format description.
Since the configured size only has pixel precision, the fractional
fixed-point part of the source size is dropped for both components to
ensure that the scaling factors are accurate.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-26-paul.kocialkowski@bootlin.com
The values in the BT601 YUV to RGB colorspace translation are not
simply coded as multiples, but rather as fixed-point signed fractional
values on a given number of bits. Add an explanation about that.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-24-paul.kocialkowski@bootlin.com
This introduces support for the BGRX8888 input format for the frontend,
with its associated pixel sequence value definition. Other fields are
already configured correctly as they no longer depend on the format's
fourcc directly.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-22-paul.kocialkowski@bootlin.com
Use the number of planes associated with the DRM format to determine the
input mode configuration instead of the format iteself. This way, the
helper can be used for all packed formats without future changes.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-20-paul.kocialkowski@bootlin.com
This introduces proper definitions for the input and output format
configuration registers instead of a macro and raw values in the code,
with the intent to increase code readability and reduce indirections.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-19-paul.kocialkowski@bootlin.com
This introduces new helpers for retrieving the input data mode and pixel
sequence register field values based on the DRM format instead of
hardcoding these. This makes it easier to add support for more formats.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-18-paul.kocialkowski@bootlin.com
In order to support YUV to RGB conversion with the frontend (which is
generally used for connecting with the backend), the CSC block must not
be bypassed.
As a result, the bit to enable CSC bypass is moved from the runtime
resume routine to the format update routine, so that it can disabled
when introducing support for YUV formats later.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-17-paul.kocialkowski@bootlin.com
Since more formats can be supported by the frontend, rename the
variable listing the layer formats to avoid suggesting that the backend
itself supports all the listed formats.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-16-paul.kocialkowski@bootlin.com
Our hardware has a limited number of YUV planes (usually 1) that can be
supported using the backend only. However, YUV planes can also be
supported by the frontend and must then not be counted when checking for
that limitation.
Only count the YUV plane when the frontend is not used.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-15-paul.kocialkowski@bootlin.com
Before this patch, it is assumed that a plane is supported either
through the frontend or through the backend alone. However, the DRM
interface does not allow finely reporting our hardware capabilities
and there are cases where neither are support.
In particular, some plane formats are supported by the backend and not
the frontend, so they can only be supported without scaling.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-8-paul.kocialkowski@bootlin.com
Checking that scaling is in use is not sufficient as a condition to
decide to use the frontend.
Since not all layer formats are supported by the frontend, we need to
check for that support first. Then, the frontend must only be enabled
if the backend doesn't support the format or that scaling is required.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-7-paul.kocialkowski@bootlin.com
In order to check whether the frontend supports a specific format, an
explicit list and a related helper are introduced.
Just like in the backend, the prototype of the helper is added to the
frontend header so that it can be used later on. The helper is also
exported because it will be used outside of the frontend module.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-6-paul.kocialkowski@bootlin.com
In order to check whether the backend supports a specific format, an
explicit list and a related helper are introduced.
The prototype of this helper is added to the header so that it can be
called from sun4i_layer later (when introducing tiled mode support).
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-5-paul.kocialkowski@bootlin.com
The backend allows integer-only scaling but can handle alpha components,
unlike the frontend. It could be useful to add support for this
eventually, so add a short TODO comment describing the situation.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-4-paul.kocialkowski@bootlin.com
The frontend documentation (for the A33) mentions that ARGB is supported
as output, but with the alpha component always set to 0xff. In practice,
this means that the alpha component cannot be preserved when going
through the frontend. Since the information is lost, ARGB is not
properly supported.
As a result, expose the matching format supported by the frontend (both
for input and output) as XRGB instead of ARGB.
Since ARGB was the selected format for connecting the frontend to the
backend, change it to XRGB to reflect this as well.
The A31 and A80 SoCs apparently have a bit to enable proper alpha,
but this is not supported at this point (see the comment already in the
code).
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-3-paul.kocialkowski@bootlin.com
This adds a dedicated function for cleaning the video and YUV source
channel layer enable bits. This function is called first on layer atomic
update to make sure that there are no leftover bits from previous
plane configuration that were not cleaned until now.
It fixes issues when alternating between video and YUV planes, where
both bits would be set eventually, leading to broken plane display.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181123092515.2511-2-paul.kocialkowski@bootlin.com
- 0 is a valid physical address on some arm boards, we can't use
0 as the error value
- don't try to cache flush the error return value (no matter what it is)
-----BEGIN PGP SIGNATURE-----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=mdIx
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-4.20-3' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
"Two dma-direct / swiotlb regressions fixes:
- zero is a valid physical address on some arm boards, we can't use
it as the error value
- don't try to cache flush the error return value (no matter what it
is)"
* tag 'dma-mapping-4.20-3' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: Skip cache maintenance on map error
dma-direct: Make DIRECT_MAPPING_ERROR viable for SWIOTLB
Highlights include:
Bugfixes:
- Fix a NFSv4 state manager deadlock when returning a delegation
- NFSv4.2 copy do not allocate memory under the lock
- flexfiles: Use the correct stateid for IO in the tightly coupled case
-----BEGIN PGP SIGNATURE-----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=hqbe
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.20-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client bugfixes from Trond Myklebust:
- Fix a NFSv4 state manager deadlock when returning a delegation
- NFSv4.2 copy do not allocate memory under the lock
- flexfiles: Use the correct stateid for IO in the tightly coupled case
* tag 'nfs-for-4.20-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
flexfiles: use per-mirror specified stateid for IO
NFSv4.2 copy do not allocate memory under the lock
NFSv4: Fix a NFSv4 state manager deadlock
I'm taking over the maintainance of Sparse so add myself as
maintainer and move Christopher's info to CREDITS.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We found some bugs in the DAX conversion to XArray (and one bug which
predated the XArray conversion). There were a couple of bugs in some of
the higher-level functions, which aren't actually being called in today's
kernel, but surfaced as a result of converting existing radix tree &
IDR users over to the XArray. Some of the other changes to how the
higher-level APIs work were also motivated by converting various users;
again, they're not in use in today's kernel, so changing them has a low
probability of introducing a bug.
Dan can still trigger a bug in the DAX code with hot-offline/online,
and we're working on tracking that down.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAlv542AUHHdpbGx5QGlu
ZnJhZGVhZC5vcmcACgkQDpNsjXcpgj5BoAf/QZzbBcYuYMLMDYofvHKGlmk2yx/a
ObUlxlQtXGHvPp3oC3rdwAvcN/KAMDpU0u+PXab2MnrNw5okhpS6ZwGODlkarNA4
XbVQNGbtEbACr1V3CWc0NzLbYm6JtGpMum0Wx9MVR/VdTnGArBLBYQMYa/c1YhKA
vEBPf+w0j0QoCTAgPiIvq0aksuBQERUvjhlUvoaMY7F4sAhnaW558lvaEcc1xGxq
70+3cRPT6Uh12tEvi0LKP1NNEXebvQSftMvFEUPF2xo5z2v//KEobzv/anbojxQ8
BtxouIGSr4tME9g3xSpd9rTbUcW3bwDAhuWZvpP/ViRwW2UkEQonpApdaw==
=0Ert
-----END PGP SIGNATURE-----
Merge tag 'xarray-4.20-rc4' of git://git.infradead.org/users/willy/linux-dax
Pull XArray updates from Matthew Wilcox:
"We found some bugs in the DAX conversion to XArray (and one bug which
predated the XArray conversion). There were a couple of bugs in some
of the higher-level functions, which aren't actually being called in
today's kernel, but surfaced as a result of converting existing radix
tree & IDR users over to the XArray.
Some of the other changes to how the higher-level APIs work were also
motivated by converting various users; again, they're not in use in
today's kernel, so changing them has a low probability of introducing
a bug.
Dan can still trigger a bug in the DAX code with hot-offline/online,
and we're working on tracking that down"
* tag 'xarray-4.20-rc4' of git://git.infradead.org/users/willy/linux-dax:
XArray tests: Add missing locking
dax: Avoid losing wakeup in dax_lock_mapping_entry
dax: Fix huge page faults
dax: Fix dax_unlock_mapping_entry for PMD pages
dax: Reinstate RCU protection of inode
dax: Make sure the unlocking entry isn't locked
dax: Remove optimisation from dax_lock_mapping_entry
XArray tests: Correct some 64-bit assumptions
XArray: Correct xa_store_range
XArray: Fix Documentation
XArray: Handle NULL pointers differently for allocation
XArray: Unify xa_store and __xa_store
XArray: Add xa_store_bh() and xa_store_irq()
XArray: Turn xa_erase into an exported function
XArray: Unify xa_cmpxchg and __xa_cmpxchg
XArray: Regularise xa_reserve
nilfs2: Use xa_erase_irq
XArray: Export __xa_foo to non-GPL modules
XArray: Fix xa_for_each with a single element at 0
This entry asked to rename all drm core "*_reference/_unrefence"
functions to "*_get/_put".
Now that this task is complete, we can remove this entry from the TODO
list.
Signed-off-by: Fernando Ramos <greenfoo@gluegarage.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181115221634.22715-10-greenfoo@gluegarage.com
The coccinelle script was used to rename some (deprecated) functions
which no longer exist now.
Signed-off-by: Fernando Ramos <greenfoo@gluegarage.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181115221634.22715-9-greenfoo@gluegarage.com
There are no more places where this (deprecated) function is being used
from, thus it can now be removed.
Signed-off-by: Fernando Ramos <greenfoo@gluegarage.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181115221634.22715-8-greenfoo@gluegarage.com
There are no more places where this (deprecated) function is being
used from, thus it can now be removed.
Signed-off-by: Fernando Ramos <greenfoo@gluegarage.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181115221634.22715-7-greenfoo@gluegarage.com
This patch unifies the naming of DRM functions for reference counting as
requested on Documentation/gpu/todo.rst
Signed-off-by: Fernando Ramos <greenfoo@gluegarage.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181115221634.22715-6-greenfoo@gluegarage.com
There are no more places where this (deprecated) function is being used
from, thus it can now be removed.
Signed-off-by: Fernando Ramos <greenfoo@gluegarage.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181115221634.22715-5-greenfoo@gluegarage.com
This patch unifies the naming of DRM functions for reference counting as
requested on Documentation/gpu/todo.rst
Signed-off-by: Fernando Ramos <greenfoo@gluegarage.com>
Acked-by: Boris Brezillon <boris.brezillon@bootlin.com>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Acked-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181115221634.22715-4-greenfoo@gluegarage.com
There are no more places where these (deprecated) functions are being
used from, thus they can now be removed.
Signed-off-by: Fernando Ramos <greenfoo@gluegarage.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181115221634.22715-3-greenfoo@gluegarage.com
