irq_to_desc() is not exported to loadable modules, so this driver now
fails to link in some configurations:
ERROR: modpost: "irq_to_desc" [drivers/mailbox/zynqmp-ipi-mailbox.ko] undefined!
I can't see a purpose for this call, since the return value is unused
and probably left over from some code refactoring.
Address the link failure by just removing the line.
Fixes: 6ffb163534 ("mailbox: zynqmp: handle SGI for shared IPI")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Tanmay Shah <tanmay.shah@amd.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The only generic interface to execute asynchronously in the BH context is
tasklet; however, it's marked deprecated and has some design flaws. To
replace tasklets, BH workqueue support was recently added. A BH workqueue
behaves similarly to regular workqueues except that the queued work items
are executed in the BH context.
Based on the work done by Tejun Heo <tj@kernel.org>
Branch: https://git.kernel.org/pub/scm/linux/kernel/git/tj/wq.git for-6.10
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The return value of pm_runtime_get_sync() in cmdq_mbox_shutdown()
will return 1 when pm runtime state is active, and we don't want to
get the warning message in this case.
So we change the return value < 0 for WARN_ON().
Fixes: 8afe816b0c ("mailbox: mtk-cmdq-mailbox: Implement Runtime PM with autosuspend")
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Add MODULE_DEVICE_TABLE(), so this module could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
At least one IPI is used in TF-A for communication with PMC firmware.
If this IPI needs to be used by other agents such as RPU then, IPI
system interrupt can't be generated in mailbox driver. In such case
TF-A generates SGI to mailbox driver for IPI notification.
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Signed-off-by: Saeed Nowshadi <saeed.nowshadi@amd.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Add support for ARM MHUv3 mailbox controller.
Support is limited to the MHUv3 Doorbell extension using only the PBX/MBX
combined interrupts.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The kernel FIFO queue has a couple issues. The biggest issue is that
it causes extra latency in a path that can be used in real-time tasks,
such as communication with real-time remote processors.
The whole FIFO idea itself looks to be a leftover from before the
unified mailbox framework. The current mailbox framework expects
mbox_chan_received_data() to be called with data immediately as it
arrives. Remove the FIFO and pass the messages to the mailbox
framework directly as part of a threaded IRQ handler.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
It is much more clear to check if the hardware FIFO is full and return
EBUSY if true. This allows us to also remove one level of indention
from the core of this function. It also makes the similarities between
omap_mbox_chan_send_noirq() and omap_mbox_chan_send() more obvious.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
This function only checks if mbox_chan *chan is not NULL, but that cannot
be the case and if it was returning NULL which is not later checked
doesn't save us from this. The second check for chan->con_priv is
completely redundant as if it was NULL we would return NULL just the
same. Simply dereference con_priv directly and remove this function.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The driver stores a list of omap_mbox structs so it can later use it to
lookup the mailbox names in of_xlate. This same information is already
available in the mbox_controller passed into of_xlate. Simply use that
data and remove the extra allocation and storage of the omap_mbox list.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The mbox_controller struct is only needed in the probe function. Make
it a local variable instead of storing a copy in omap_mbox_device
to simplify that struct.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Currently the driver loops through all mailbox child nodes twice, once
to read in data from each node, and again to make use of this data.
Instead read the data and make use of it in one pass. This removes
the need for several temporary data structures and reduces the
complexity of this main loop in probe.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Use device life-cycle managed runtime enable function to simplify probe
and exit paths.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The driver currently creates a new device class "mbox". Then for each
mailbox adds a device to that class. This class provides no file
operations provided for any userspace users of this device class.
It may have been extended to be functional in our vendor tree at
some point, but that is not the case anymore, nor does it matter
for the upstream tree.
Remove this device class and related functions and variables.
This also allows us to switch to module_platform_driver() as
there is nothing left to do in module_init().
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The type of message sent using omap-mailbox is always u32. The definition
of mbox_msg_t is uintptr_t which is wrong as that type changes based on
the architecture (32bit vs 64bit). This type should have been defined as
u32. Instead of making that change here, simply remove the header usage
and fix the last couple users of the same in this driver.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The mbox_kfifo_size can be changed at runtime, the sanity
check on it's value should be done when it is used, not
only once at init time.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
This is only used internal to the driver, move it out of the
public header and into the driver file. While we are here,
this is not used as a bitwise, so drop that and make it a
simple enum type.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
These function are not used, remove these here.
While here, remove the leading _ from the driver internal functions that
do the same thing as the functions removed.
Signed-off-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
On Xilinx-AMD Versal and Versal-NET, there exist both
inter-processor-interrupts with corresponding message buffers and without
such buffers.
Add a routine that, if the corresponding DT compatible
string "xlnx,versal-ipi-mailbox" is used then a Versal-based SOC
can use a mailbox Device Tree entry where both host and remote
can use either of the buffered or bufferless interrupts.
Signed-off-by: Ben Levinsky <ben.levinsky@amd.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Move routine that initializes the mailboxes for send and receive to
a function pointer that is set based on compatible string.
Signed-off-by: Ben Levinsky <ben.levinsky@amd.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The of_match structure zynqmp_ipi_of_match is now adjacent to where it
used in the zynqmp_ipi_driver structure for readability.
Signed-off-by: Ben Levinsky <ben.levinsky@amd.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
misc: I will be signing-off from my personal gmail id from now on.
-----BEGIN PGP SIGNATURE-----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=+39i
-----END PGP SIGNATURE-----
Merge tag 'mailbox-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox
Pull mailbox updates from Jassi Brar:
- imx: add support for i.MX95 ELE/V2X MU
- misc: I will be signing-off from my personal gmail id from now on
* tag 'mailbox-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox: imx: support i.MX95 Generic/ELE/V2X MU
mailbox: imx: populate sub-nodes
mailbox: imx: get RR/TR registers num from Parameter register
mailbox: imx: support return value of init
dt-bindings: mailbox: fsl,mu: add i.MX95 Generic/ELE/V2X MU compatible
Add i.MX95 Generic/ELE/V2X MU support, its register layout is same as
i.MX8ULP, but the Parameter registers would show different
TR/RR. Since the driver already supports get TR/RR from Parameter
registers, not hardcoding the number, this patch just add
the compatible entry to reuse i.MX8ULP S4 cfg data.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Some MUs such as i.MX95 MU, have internal SRAM which could be used
for SCMI shared memory, so populate the sub-nodes to use the SRAM.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
i.MX8ULP, i.MX93 MU has a Parameter register encoded as below:
BIT: 15 --- 8 | 7 --- 0
RR_NUM TR_NUM
So to make driver easy to support more variants, get the RR/TR
registers number from Parameter register.
The patch only adds support the specific MU, such as ELE MU.
For generic MU, not add support for number larger than 4.
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
There will be changes that init may fail, so adding return value for
init function.
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Switch all the users of the platform MSI domain over to invoke the new
interfaces which branch to the original platform MSI functions when the
irqdomain associated to the caller device does not yet provide MSI parent
functionality.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240127161753.114685-7-apatel@ventanamicro.com
Add CMDQ driver support for mt8188 by adding its compatible and
driver data in CMDQ driver.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Sort cmdq platform data according to the number sequence of
compatible names.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Rename gce_plat variable postfix from 'v1~v7' to SoC names.
Signed-off-by: Jason-JH.Lin <jason-jh.lin@mediatek.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
kernel test robot reports 2 Excess struct member warnings:
zynqmp-ipi-mailbox.c:92: warning: Excess struct member 'irq' description in 'zynqmp_ipi_mbox'
zynqmp-ipi-mailbox.c:112: warning: Excess struct member 'ipi_mboxes' description in 'zynqmp_ipi_pdata'
The second one is a false positive that is caused by the
__counted_by() attribute. Kees has posted a patch for that, so just
fix the first one.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312150705.glrQ4ypv-lkp@intel.com/
Cc: linux-arm-kernel@lists.infradead.org
Reviewed-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Message Handling Unit version is v2.1.
When arm_mhuv2 working with the data protocol transfer mode.
We have split one mhu into two channels, and every channel
include four channel windows, the two channels share
one gic spi interrupt.
There is a problem with the sending scenario.
The first channel will take up 0-3 channel windows, and the second
channel take up 4-7 channel windows. When the first channel send the
data, and the receiver will clear all the four channels status.
Although we only enabled the interrupt on the last channel window with
register CH_INT_EN,the register CHCOMB_INT_ST0 will be 0xf, not be 0x8.
Currently we just clear the last channel windows int status with the
data proctol mode.So after that,the CHCOMB_INT_ST0 status will be 0x7,
not be the 0x0.
Then the second channel send the data, the receiver read the
data, clear all the four channel windows status, trigger the sender
interrupt. But currently the CHCOMB_INT_ST0 register will be 0xf7,
get_irq_chan_comb function will always return the first channel.
So this patch clear all channel windows int status to avoid this interrupt
confusion.
Signed-off-by: Xiaowu.ding <xiaowu.ding@jaguarmicro.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Similarly to previous commit e172258870 ("mailbox: qcom-apcs-ipc: do
not grow the of_device_id"), move compatibles with fallbacks in the
of_device_id table, to indicate these are not necessary. This only
shuffles the code. No functional impact.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
This driver is now orphaned and superseded by
drivers/soc/apple/mailbox.c.
Acked-by: Eric Curtin <ecurtin@redhat.com>
Acked-by: Neal Gompa <neal@gompa.dev>
Acked-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Signed-off-by: Hector Martin <marcan@marcan.st>
- Add symbol definitions related to CDAT to the ACPICA code (Dave
Jiang).
- Use the acpi_device_is_present() helper in more places and rename
acpi_scan_device_not_present() to be about enumeration (James Morse).
- Add __printf format attribute to acpi_os_vprintf() (Su Hui).
- Clean up departures from kernel coding style in the low-level
interface for ACPICA (Jonathan Bergh).
- Replace strncpy() with strscpy() in acpi_osi_setup() (Justin Stitt).
- Fail FPDT parsing on zero length records and add proper handling for
fpdt_process_subtable() to acpi_init_fpdt() (Vasily Khoruzhick).
- Rework acpi_handle_list handling so as to manage it dynamically,
including size computation (Rafael Wysocki).
- Clean up ACPI utilities code so as to make it follow the kernel
coding style (Jonathan Bergh).
- Consolidate IRQ trigger-type override DMI tables and drop .ident
values from dmi_system_id tables used for ACPI resources management
quirks (Hans de Goede).
- Add ACPI IRQ override for TongFang GMxXGxx (Werner Sembach).
- Allow _DSD buffer data only for byte accessors and document the _DSD
data buffer GUID (Andy Shevchenko).
- Drop BayTrail and Lynxpoint pinctrl device IDs from the ACPI LPSS
driver, because it does not need them (Raag Jadav).
- Add acpi_backlight=vendor quirk for Toshiba Portégé R100 (Ondrej
Zary).
- Add "vendor" backlight quirks for 3 Lenovo x86 Android tablets (Hans
de Goede).
- Move Xiaomi Mi Pad 2 backlight quirk to its own section (Hans de
Goede).
- Annotate struct prm_module_info with __counted_by (Kees Cook).
- Fix AER info corruption in aer_recover_queue() when error status data
has multiple sections (Shiju Jose).
- Make APEI use ERST maximum execution time for slow devices (Jeshua
Smith).
- Add support for platform notification handling to the PCC mailbox
driver and modify it to support shared interrupts for multiple
subspaces (Huisong Li).
- Define common macros to use when referring to various bitfields in the
PCC generic communications channel command and status fields and use
them in some drivers (Sudeep Holla).
- Add EC GPE detection quirk for HP 250 G7 Notebook PC (Jonathan
Denose).
- Fix and clean up create_pnp_modalias() and create_of_modalias()
(Christophe JAILLET).
- Modify 2 pieces of code to use acpi_evaluate_dsm_typed() (Andy
Shevchenko).
- Define acpi_dev_uid_match() for matching _UID and use it in several
places (Raag Jadav).
- Use acpi_device_uid() for fetching _UID in 2 places (Raag Jadav).
- Add context argument to acpi_dev_install_notify_handler() (Rafael
Wysocki).
- Clarify ACPI bus concepts in the ACPI device enumeration
documentation (Rafael Wysocki).
- Switch over the ACPI AC and ACPI PAD drivers to using the platform
driver interface which, is more logically consistent than binding a
driver directly to an ACPI device object, and clean them up (Michal
Wilczynski).
- Replace strncpy() in the PNP code with either memcpy() or strscpy()
as appropriate (Justin Stitt).
- Clean up coding style in pnp.h (GuoHua Cheng).
-----BEGIN PGP SIGNATURE-----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=p4Yo
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These fix issues, add new quirks, rearrange the IRQ override quirk
definitions, add new helpers and switch over code to using them,
rework a couple of interfaces to be more flexible, eliminate strncpy()
usage from PNP, extend the ACPI PCC mailbox driver and clean up code.
This is based on ACPI thermal driver changes that are present in the
thermal control updates for 6.7-rc1 pull request (they are depended on
by the ACPI utilities updates). However, the ACPI thermal driver
changes are not included in the list of specific ACPI changes below.
Specifics:
- Add symbol definitions related to CDAT to the ACPICA code (Dave
Jiang)
- Use the acpi_device_is_present() helper in more places and rename
acpi_scan_device_not_present() to be about enumeration (James
Morse)
- Add __printf format attribute to acpi_os_vprintf() (Su Hui)
- Clean up departures from kernel coding style in the low-level
interface for ACPICA (Jonathan Bergh)
- Replace strncpy() with strscpy() in acpi_osi_setup() (Justin Stitt)
- Fail FPDT parsing on zero length records and add proper handling
for fpdt_process_subtable() to acpi_init_fpdt() (Vasily Khoruzhick)
- Rework acpi_handle_list handling so as to manage it dynamically,
including size computation (Rafael Wysocki)
- Clean up ACPI utilities code so as to make it follow the kernel
coding style (Jonathan Bergh)
- Consolidate IRQ trigger-type override DMI tables and drop .ident
values from dmi_system_id tables used for ACPI resources management
quirks (Hans de Goede)
- Add ACPI IRQ override for TongFang GMxXGxx (Werner Sembach)
- Allow _DSD buffer data only for byte accessors and document the
_DSD data buffer GUID (Andy Shevchenko)
- Drop BayTrail and Lynxpoint pinctrl device IDs from the ACPI LPSS
driver, because it does not need them (Raag Jadav)
- Add acpi_backlight=vendor quirk for Toshiba Portégé R100 (Ondrej
Zary)
- Add "vendor" backlight quirks for 3 Lenovo x86 Android tablets
(Hans de Goede)
- Move Xiaomi Mi Pad 2 backlight quirk to its own section (Hans de
Goede)
- Annotate struct prm_module_info with __counted_by (Kees Cook)
- Fix AER info corruption in aer_recover_queue() when error status
data has multiple sections (Shiju Jose)
- Make APEI use ERST maximum execution time for slow devices (Jeshua
Smith)
- Add support for platform notification handling to the PCC mailbox
driver and modify it to support shared interrupts for multiple
subspaces (Huisong Li)
- Define common macros to use when referring to various bitfields in
the PCC generic communications channel command and status fields
and use them in some drivers (Sudeep Holla)
- Add EC GPE detection quirk for HP 250 G7 Notebook PC (Jonathan
Denose)
- Fix and clean up create_pnp_modalias() and create_of_modalias()
(Christophe JAILLET)
- Modify 2 pieces of code to use acpi_evaluate_dsm_typed() (Andy
Shevchenko)
- Define acpi_dev_uid_match() for matching _UID and use it in several
places (Raag Jadav)
- Use acpi_device_uid() for fetching _UID in 2 places (Raag Jadav)
- Add context argument to acpi_dev_install_notify_handler() (Rafael
Wysocki)
- Clarify ACPI bus concepts in the ACPI device enumeration
documentation (Rafael Wysocki)
- Switch over the ACPI AC and ACPI PAD drivers to using the platform
driver interface which, is more logically consistent than binding a
driver directly to an ACPI device object, and clean them up (Michal
Wilczynski)
- Replace strncpy() in the PNP code with either memcpy() or strscpy()
as appropriate (Justin Stitt)
- Clean up coding style in pnp.h (GuoHua Cheng)"
* tag 'acpi-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (54 commits)
ACPI: resource: Do IRQ override on TongFang GMxXGxx
perf: arm_cspmu: use acpi_dev_hid_uid_match() for matching _HID and _UID
ACPI: EC: Add quirk for HP 250 G7 Notebook PC
ACPI: x86: use acpi_dev_uid_match() for matching _UID
ACPI: utils: use acpi_dev_uid_match() for matching _UID
pinctrl: intel: use acpi_dev_uid_match() for matching _UID
ACPI: utils: Introduce acpi_dev_uid_match() for matching _UID
ACPI: sysfs: Clean up create_pnp_modalias() and create_of_modalias()
ACPI: sysfs: Fix create_pnp_modalias() and create_of_modalias()
ACPI: acpi_pad: Rename ACPI device from device to adev
ACPI: acpi_pad: Use dev groups for sysfs
ACPI: acpi_pad: Replace acpi_driver with platform_driver
ACPI: APEI: Use ERST timeout for slow devices
ACPI: scan: Rename acpi_scan_device_not_present() to be about enumeration
PNP: replace deprecated strncpy() with memcpy()
PNP: ACPI: replace deprecated strncpy() with strscpy()
perf: qcom: use acpi_device_uid() for fetching _UID
ACPI: sysfs: use acpi_device_uid() for fetching _UID
ACPI: scan: Use the acpi_device_is_present() helper in more places
ACPI: AC: Rename ACPI device from device to adev
...
