mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-11 21:38:32 +08:00
b5ad4cdc46
283 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Florent Revest
|
60c8971899 |
ftrace: Make DIRECT_CALLS work WITH_ARGS and !WITH_REGS
Direct called trampolines can be called in two ways:
- either from the ftrace callsite. In this case, they do not access any
struct ftrace_regs nor pt_regs
- Or, if a ftrace ops is also attached, from the end of a ftrace
trampoline. In this case, the call_direct_funcs ops is in charge of
setting the direct call trampoline's address in a struct ftrace_regs
Since:
commit
|
||
Linus Torvalds
|
b72b5fecc1 |
tracing updates for 6.3:
- Add function names as a way to filter function addresses - Add sample module to test ftrace ops and dynamic trampolines - Allow stack traces to be passed from beginning event to end event for synthetic events. This will allow seeing the stack trace of when a task is scheduled out and recorded when it gets scheduled back in. - Add trace event helper __get_buf() to use as a temporary buffer when printing out trace event output. - Add kernel command line to create trace instances on boot up. - Add enabling of events to instances created at boot up. - Add trace_array_puts() to write into instances. - Allow boot instances to take a snapshot at the end of boot up. - Allow live patch modules to include trace events - Minor fixes and clean ups -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCY/PaaBQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qh5iAPoD0LKZzD33rhO5Ec4hoexE0DkqycP3 dvmOMbCBL8GkxwEA+d2gLz/EquSFm166hc4D79Sn3geCqvkwmy8vQWVjIQc= =M82D -----END PGP SIGNATURE----- Merge tag 'trace-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing updates from Steven Rostedt: - Add function names as a way to filter function addresses - Add sample module to test ftrace ops and dynamic trampolines - Allow stack traces to be passed from beginning event to end event for synthetic events. This will allow seeing the stack trace of when a task is scheduled out and recorded when it gets scheduled back in. - Add trace event helper __get_buf() to use as a temporary buffer when printing out trace event output. - Add kernel command line to create trace instances on boot up. - Add enabling of events to instances created at boot up. - Add trace_array_puts() to write into instances. - Allow boot instances to take a snapshot at the end of boot up. - Allow live patch modules to include trace events - Minor fixes and clean ups * tag 'trace-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (31 commits) tracing: Remove unnecessary NULL assignment tracepoint: Allow livepatch module add trace event tracing: Always use canonical ftrace path tracing/histogram: Fix stacktrace histogram Documententation tracing/histogram: Fix stacktrace key tracing/histogram: Fix a few problems with stacktrace variable printing tracing: Add BUILD_BUG() to make sure stacktrace fits in strings tracing/histogram: Don't use strlen to find length of stacktrace variables tracing: Allow boot instances to have snapshot buffers tracing: Add trace_array_puts() to write into instance tracing: Add enabling of events to boot instances tracing: Add creation of instances at boot command line tracing: Fix trace_event_raw_event_synth() if else statement samples: ftrace: Make some global variables static ftrace: sample: avoid open-coded 64-bit division samples: ftrace: Include the nospec-branch.h only for x86 tracing: Acquire buffer from temparary trace sequence tracing/histogram: Wrap remaining shell snippets in code blocks tracing/osnoise: No need for schedule_hrtimeout range bpf/tracing: Use stage6 of tracing to not duplicate macros ... |
||
|
Linus Torvalds
|
8bf1a529cd |
arm64 updates for 6.3:
- Support for arm64 SME 2 and 2.1. SME2 introduces a new 512-bit architectural register (ZT0, for the look-up table feature) that Linux needs to save/restore. - Include TPIDR2 in the signal context and add the corresponding kselftests. - Perf updates: Arm SPEv1.2 support, HiSilicon uncore PMU updates, ACPI support to the Marvell DDR and TAD PMU drivers, reset DTM_PMU_CONFIG (ARM CMN) at probe time. - Support for DYNAMIC_FTRACE_WITH_CALL_OPS on arm64. - Permit EFI boot with MMU and caches on. Instead of cleaning the entire loaded kernel image to the PoC and disabling the MMU and caches before branching to the kernel bare metal entry point, leave the MMU and caches enabled and rely on EFI's cacheable 1:1 mapping of all of system RAM to populate the initial page tables. - Expose the AArch32 (compat) ELF_HWCAP features to user in an arm64 kernel (the arm32 kernel only defines the values). - Harden the arm64 shadow call stack pointer handling: stash the shadow stack pointer in the task struct on interrupt, load it directly from this structure. - Signal handling cleanups to remove redundant validation of size information and avoid reading the same data from userspace twice. - Refactor the hwcap macros to make use of the automatically generated ID registers. It should make new hwcaps writing less error prone. - Further arm64 sysreg conversion and some fixes. - arm64 kselftest fixes and improvements. - Pointer authentication cleanups: don't sign leaf functions, unify asm-arch manipulation. - Pseudo-NMI code generation optimisations. - Minor fixes for SME and TPIDR2 handling. - Miscellaneous updates: ARCH_FORCE_MAX_ORDER is now selectable, replace strtobool() to kstrtobool() in the cpufeature.c code, apply dynamic shadow call stack in two passes, intercept pfn changes in set_pte_at() without the required break-before-make sequence, attempt to dump all instructions on unhandled kernel faults. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAmP0/QsACgkQa9axLQDI XvG+gA/+JDVEH9wRzAIZvbp9hSuohPc48xgAmIMP1eiVB0/5qeRjYAJwS33H0rXS BPC2kj9IBy/eQeM9ICg0nFd0zYznSVacITqe6NrqeJ1F+ftS4rrHdfxd+J7kIoCs V2L8e+BJvmHdhmNV2qMAgJdGlfxfQBA7fv2cy52HKYcouoOh1AUVR/x+yXVXAsCd qJP3+dlUKccgm/oc5unEC1eZ49u8O+EoasqOyfG6K5udMgzhEX3K6imT9J3hw0WT UjstYkx5uGS/prUrRCQAX96VCHoZmzEDKtQuHkHvQXEYXsYPF3ldbR2CziNJnHe7 QfSkjJlt8HAtExA+BkwEe9i0MQO/2VF5qsa2e4fA6l7uqGu3LOtS/jJd23C9n9fR Id8aBMeN6S8+MjqRA9L2uf4t6e4ISEHoG9ZRdc4WOwloxEEiJoIeun+7bHdOSZLj AFdHFCz4NXiiwC0UP0xPDI2YeCLqt5np7HmnrUqwzRpVO8UUagiJD8TIpcBSjBN9 J68eidenHUW7/SlIeaMKE2lmo8AUEAJs9AorDSugF19/ThJcQdx7vT2UAZjeVB3j 1dbbwajnlDOk/w8PQC4thFp5/MDlfst0htS3WRwa+vgkweE2EAdTU4hUZ8qEP7FQ smhYtlT1xUSTYDTqoaG/U2OWR6/UU79wP0jgcOsHXTuyYrtPI/Q= =VmXL -----END PGP SIGNATURE----- Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - Support for arm64 SME 2 and 2.1. SME2 introduces a new 512-bit architectural register (ZT0, for the look-up table feature) that Linux needs to save/restore - Include TPIDR2 in the signal context and add the corresponding kselftests - Perf updates: Arm SPEv1.2 support, HiSilicon uncore PMU updates, ACPI support to the Marvell DDR and TAD PMU drivers, reset DTM_PMU_CONFIG (ARM CMN) at probe time - Support for DYNAMIC_FTRACE_WITH_CALL_OPS on arm64 - Permit EFI boot with MMU and caches on. Instead of cleaning the entire loaded kernel image to the PoC and disabling the MMU and caches before branching to the kernel bare metal entry point, leave the MMU and caches enabled and rely on EFI's cacheable 1:1 mapping of all of system RAM to populate the initial page tables - Expose the AArch32 (compat) ELF_HWCAP features to user in an arm64 kernel (the arm32 kernel only defines the values) - Harden the arm64 shadow call stack pointer handling: stash the shadow stack pointer in the task struct on interrupt, load it directly from this structure - Signal handling cleanups to remove redundant validation of size information and avoid reading the same data from userspace twice - Refactor the hwcap macros to make use of the automatically generated ID registers. It should make new hwcaps writing less error prone - Further arm64 sysreg conversion and some fixes - arm64 kselftest fixes and improvements - Pointer authentication cleanups: don't sign leaf functions, unify asm-arch manipulation - Pseudo-NMI code generation optimisations - Minor fixes for SME and TPIDR2 handling - Miscellaneous updates: ARCH_FORCE_MAX_ORDER is now selectable, replace strtobool() to kstrtobool() in the cpufeature.c code, apply dynamic shadow call stack in two passes, intercept pfn changes in set_pte_at() without the required break-before-make sequence, attempt to dump all instructions on unhandled kernel faults * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (130 commits) arm64: fix .idmap.text assertion for large kernels kselftest/arm64: Don't require FA64 for streaming SVE+ZA tests kselftest/arm64: Copy whole EXTRA context arm64: kprobes: Drop ID map text from kprobes blacklist perf: arm_spe: Print the version of SPE detected perf: arm_spe: Add support for SPEv1.2 inverted event filtering perf: Add perf_event_attr::config3 arm64/sme: Fix __finalise_el2 SMEver check drivers/perf: fsl_imx8_ddr_perf: Remove set-but-not-used variable arm64/signal: Only read new data when parsing the ZT context arm64/signal: Only read new data when parsing the ZA context arm64/signal: Only read new data when parsing the SVE context arm64/signal: Avoid rereading context frame sizes arm64/signal: Make interface for restore_fpsimd_context() consistent arm64/signal: Remove redundant size validation from parse_user_sigframe() arm64/signal: Don't redundantly verify FPSIMD magic arm64/cpufeature: Use helper macros to specify hwcaps arm64/cpufeature: Always use symbolic name for feature value in hwcaps arm64/sysreg: Initial unsigned annotations for ID registers arm64/sysreg: Initial annotation of signed ID registers ... |
||
Ross Zwisler
|
2455f0e124 |
tracing: Always use canonical ftrace path
The canonical location for the tracefs filesystem is at /sys/kernel/tracing. But, from Documentation/trace/ftrace.rst: Before 4.1, all ftrace tracing control files were within the debugfs file system, which is typically located at /sys/kernel/debug/tracing. For backward compatibility, when mounting the debugfs file system, the tracefs file system will be automatically mounted at: /sys/kernel/debug/tracing Many comments and Kconfig help messages in the tracing code still refer to this older debugfs path, so let's update them to avoid confusion. Link: https://lore.kernel.org/linux-trace-kernel/20230215223350.2658616-2-zwisler@google.com Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com> Signed-off-by: Ross Zwisler <zwisler@google.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
Randy Dunlap
|
ac28d0a0f4 |
tracing: Kconfig: Fix spelling/grammar/punctuation
Fix some editorial nits in trace Kconfig. Link: https://lkml.kernel.org/r/20230124181647.15902-1-rdunlap@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> |
||
Mark Rutland
|
cbad0fb2d8 |
ftrace: Add DYNAMIC_FTRACE_WITH_CALL_OPS
Architectures without dynamic ftrace trampolines incur an overhead when multiple ftrace_ops are enabled with distinct filters. in these cases, each call site calls a common trampoline which uses ftrace_ops_list_func() to iterate over all enabled ftrace functions, and so incurs an overhead relative to the size of this list (including RCU protection overhead). Architectures with dynamic ftrace trampolines avoid this overhead for call sites which have a single associated ftrace_ops. In these cases, the dynamic trampoline is customized to branch directly to the relevant ftrace function, avoiding the list overhead. On some architectures it's impractical and/or undesirable to implement dynamic ftrace trampolines. For example, arm64 has limited branch ranges and cannot always directly branch from a call site to an arbitrary address (e.g. from a kernel text address to an arbitrary module address). Calls from modules to core kernel text can be indirected via PLTs (allocated at module load time) to address this, but the same is not possible from calls from core kernel text. Using an indirect branch from a call site to an arbitrary trampoline is possible, but requires several more instructions in the function prologue (or immediately before it), and/or comes with far more complex requirements for patching. Instead, this patch adds a new option, where an architecture can associate each call site with a pointer to an ftrace_ops, placed at a fixed offset from the call site. A shared trampoline can recover this pointer and call ftrace_ops::func() without needing to go via ftrace_ops_list_func(), avoiding the associated overhead. This avoids issues with branch range limitations, and avoids the need to allocate and manipulate dynamic trampolines, making it far simpler to implement and maintain, while having similar performance characteristics. Note that this allows for dynamic ftrace_ops to be invoked directly from an architecture's ftrace_caller trampoline, whereas existing code forces the use of ftrace_ops_get_list_func(), which is in part necessary to permit the ftrace_ops to be freed once unregistered *and* to avoid branch/address-generation range limitation on some architectures (e.g. where ops->func is a module address, and may be outside of the direct branch range for callsites within the main kernel image). The CALL_OPS approach avoids this problems and is safe as: * The existing synchronization in ftrace_shutdown() using ftrace_shutdown() using synchronize_rcu_tasks_rude() (and synchronize_rcu_tasks()) ensures that no tasks hold a stale reference to an ftrace_ops (e.g. in the middle of the ftrace_caller trampoline, or while invoking ftrace_ops::func), when that ftrace_ops is unregistered. Arguably this could also be relied upon for the existing scheme, permitting dynamic ftrace_ops to be invoked directly when ops->func is in range, but this will require additional logic to handle branch range limitations, and is not handled by this patch. * Each callsite's ftrace_ops pointer literal can hold any valid kernel address, and is updated atomically. As an architecture's ftrace_caller trampoline will atomically load the ops pointer then dereference ops->func, there is no risk of invoking ops->func with a mismatches ops pointer, and updates to the ops pointer do not require special care. A subsequent patch will implement architectures support for arm64. There should be no functional change as a result of this patch alone. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> Cc: Florent Revest <revest@chromium.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20230123134603.1064407-2-mark.rutland@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> |
||
|
Linus Torvalds
|
5f6e430f93 |
powerpc updates for 6.2
- Add powerpc qspinlock implementation optimised for large system scalability and
paravirt. See the merge message for more details.
- Enable objtool to be built on powerpc to generate mcount locations.
- Use a temporary mm for code patching with the Radix MMU, so the writable mapping is
restricted to the patching CPU.
- Add an option to build the 64-bit big-endian kernel with the ELFv2 ABI.
- Sanitise user registers on interrupt entry on 64-bit Book3S.
- Many other small features and fixes.
Thanks to: Aboorva Devarajan, Angel Iglesias, Benjamin Gray, Bjorn Helgaas, Bo Liu, Chen
Lifu, Christoph Hellwig, Christophe JAILLET, Christophe Leroy, Christopher M. Riedl, Colin
Ian King, Deming Wang, Disha Goel, Dmitry Torokhov, Finn Thain, Geert Uytterhoeven,
Gustavo A. R. Silva, Haowen Bai, Joel Stanley, Jordan Niethe, Julia Lawall, Kajol Jain,
Laurent Dufour, Li zeming, Miaoqian Lin, Michael Jeanson, Nathan Lynch, Naveen N. Rao,
Nayna Jain, Nicholas Miehlbradt, Nicholas Piggin, Pali Rohár, Randy Dunlap, Rohan McLure,
Russell Currey, Sathvika Vasireddy, Shaomin Deng, Stephen Kitt, Stephen Rothwell, Thomas
Weißschuh, Tiezhu Yang, Uwe Kleine-König, Xie Shaowen, Xiu Jianfeng, XueBing Chen, Yang
Yingliang, Zhang Jiaming, ruanjinjie, Jessica Yu, Wolfram Sang.
-----BEGIN PGP SIGNATURE-----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=7k3p
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Michael Ellerman:
- Add powerpc qspinlock implementation optimised for large system
scalability and paravirt. See the merge message for more details
- Enable objtool to be built on powerpc to generate mcount locations
- Use a temporary mm for code patching with the Radix MMU, so the
writable mapping is restricted to the patching CPU
- Add an option to build the 64-bit big-endian kernel with the ELFv2
ABI
- Sanitise user registers on interrupt entry on 64-bit Book3S
- Many other small features and fixes
Thanks to Aboorva Devarajan, Angel Iglesias, Benjamin Gray, Bjorn
Helgaas, Bo Liu, Chen Lifu, Christoph Hellwig, Christophe JAILLET,
Christophe Leroy, Christopher M. Riedl, Colin Ian King, Deming Wang,
Disha Goel, Dmitry Torokhov, Finn Thain, Geert Uytterhoeven, Gustavo A.
R. Silva, Haowen Bai, Joel Stanley, Jordan Niethe, Julia Lawall, Kajol
Jain, Laurent Dufour, Li zeming, Miaoqian Lin, Michael Jeanson, Nathan
Lynch, Naveen N. Rao, Nayna Jain, Nicholas Miehlbradt, Nicholas Piggin,
Pali Rohár, Randy Dunlap, Rohan McLure, Russell Currey, Sathvika
Vasireddy, Shaomin Deng, Stephen Kitt, Stephen Rothwell, Thomas
Weißschuh, Tiezhu Yang, Uwe Kleine-König, Xie Shaowen, Xiu Jianfeng,
XueBing Chen, Yang Yingliang, Zhang Jiaming, ruanjinjie, Jessica Yu,
and Wolfram Sang.
* tag 'powerpc-6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (181 commits)
powerpc/code-patching: Fix oops with DEBUG_VM enabled
powerpc/qspinlock: Fix 32-bit build
powerpc/prom: Fix 32-bit build
powerpc/rtas: mandate RTAS syscall filtering
powerpc/rtas: define pr_fmt and convert printk call sites
powerpc/rtas: clean up includes
powerpc/rtas: clean up rtas_error_log_max initialization
powerpc/pseries/eeh: use correct API for error log size
powerpc/rtas: avoid scheduling in rtas_os_term()
powerpc/rtas: avoid device tree lookups in rtas_os_term()
powerpc/rtasd: use correct OF API for event scan rate
powerpc/rtas: document rtas_call()
powerpc/pseries: unregister VPA when hot unplugging a CPU
powerpc/pseries: reset the RCU watchdogs after a LPM
powerpc: Take in account addition CPU node when building kexec FDT
powerpc: export the CPU node count
powerpc/cpuidle: Set CPUIDLE_FLAG_POLLING for snooze state
powerpc/dts/fsl: Fix pca954x i2c-mux node names
cxl: Remove unnecessary cxl_pci_window_alignment()
selftests/powerpc: Fix resource leaks
...
|
||
|
Linus Torvalds
|
fe36bb8736 |
Tracing updates for 6.2:
- Add options to the osnoise tracer
o panic_on_stop option that panics the kernel if osnoise is greater than some
user defined threshold.
o preempt option, to test noise while preemption is disabled
o irq option, to test noise when interrupts are disabled
- Add .percent and .graph suffix to histograms to give different outputs
- Add nohitcount to disable showing hitcount in histogram output
- Add new __cpumask() to trace event fields to annotate that a unsigned long
array is a cpumask to user space and should be treated as one.
- Add trace_trigger kernel command line parameter to enable trace event
triggers at boot up. Useful to trace stack traces, disable tracing and take
snapshots.
- Fix x86/kmmio mmio tracer to work with the updates to lockdep
- Unify the panic and die notifiers
- Add back ftrace_expect reference that is used to extract more information in
the ftrace_bug() code.
- Have trigger filter parsing errors show up in the tracing error log.
- Updated MAINTAINERS file to add kernel tracing mailing list and patchwork
info
- Use IDA to keep track of event type numbers.
- And minor fixes and clean ups
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCY5vIcxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qlO7AQCmtZbriadAR6N7Llj092YXmYfzrxyi
1WS35vhpZsBJ8gEA8j68l+LrgNt51N2gXlTXEHgXzdBgL/TKAPSX4D99GQY=
=z1pe
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Add options to the osnoise tracer:
- 'panic_on_stop' option that panics the kernel if osnoise is
greater than some user defined threshold.
- 'preempt' option, to test noise while preemption is disabled
- 'irq' option, to test noise when interrupts are disabled
- Add .percent and .graph suffix to histograms to give different
outputs
- Add nohitcount to disable showing hitcount in histogram output
- Add new __cpumask() to trace event fields to annotate that a unsigned
long array is a cpumask to user space and should be treated as one.
- Add trace_trigger kernel command line parameter to enable trace event
triggers at boot up. Useful to trace stack traces, disable tracing
and take snapshots.
- Fix x86/kmmio mmio tracer to work with the updates to lockdep
- Unify the panic and die notifiers
- Add back ftrace_expect reference that is used to extract more
information in the ftrace_bug() code.
- Have trigger filter parsing errors show up in the tracing error log.
- Updated MAINTAINERS file to add kernel tracing mailing list and
patchwork info
- Use IDA to keep track of event type numbers.
- And minor fixes and clean ups
* tag 'trace-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (44 commits)
tracing: Fix cpumask() example typo
tracing: Improve panic/die notifiers
ftrace: Prevent RCU stall on PREEMPT_VOLUNTARY kernels
tracing: Do not synchronize freeing of trigger filter on boot up
tracing: Remove pointer (asterisk) and brackets from cpumask_t field
tracing: Have trigger filter parsing errors show up in error_log
x86/mm/kmmio: Remove redundant preempt_disable()
tracing: Fix infinite loop in tracing_read_pipe on overflowed print_trace_line
Documentation/osnoise: Add osnoise/options documentation
tracing/osnoise: Add preempt and/or irq disabled options
tracing/osnoise: Add PANIC_ON_STOP option
Documentation/osnoise: Escape underscore of NO_ prefix
tracing: Fix some checker warnings
tracing/osnoise: Make osnoise_options static
tracing: remove unnecessary trace_trigger ifdef
ring-buffer: Handle resize in early boot up
tracing/hist: Fix issue of losting command info in error_log
tracing: Fix issue of missing one synthetic field
tracing/hist: Fix out-of-bound write on 'action_data.var_ref_idx'
tracing/hist: Fix wrong return value in parse_action_params()
...
|
||
Masami Hiramatsu (Google)
|
e25e43a4e5 |
tracing: Fix complicated dependency of CONFIG_TRACER_MAX_TRACE
Both CONFIG_OSNOISE_TRACER and CONFIG_HWLAT_TRACER partially enables the
CONFIG_TRACER_MAX_TRACE code, but that is complicated and has
introduced a bug; It declares tracing_max_lat_fops data structure outside
of #ifdefs, but since it is defined only when CONFIG_TRACER_MAX_TRACE=y
or CONFIG_HWLAT_TRACER=y, if only CONFIG_OSNOISE_TRACER=y, that
declaration comes to a definition(!).
To fix this issue, and do not repeat the similar problem, makes
CONFIG_OSNOISE_TRACER and CONFIG_HWLAT_TRACER enables the
CONFIG_TRACER_MAX_TRACE always. It has there benefits;
- Fix the tracing_max_lat_fops bug
- Simplify the #ifdefs
- CONFIG_TRACER_MAX_TRACE code is fully enabled, or not.
Link: https://lore.kernel.org/linux-trace-kernel/167033628155.4111793.12185405690820208159.stgit@devnote3
Fixes:
|
||
|
Mark Rutland
|
94d095ffa0 |
ftrace: abstract DYNAMIC_FTRACE_WITH_ARGS accesses
In subsequent patches we'll arrange for architectures to have an
ftrace_regs which is entirely distinct from pt_regs. In preparation for
this, we need to minimize the use of pt_regs to where strictly necessary
in the core ftrace code.
This patch adds new ftrace_regs_{get,set}_*() helpers which can be used
to manipulate ftrace_regs. When CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y,
these can always be used on any ftrace_regs, and when
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=n these can be used when regs are
available. A new ftrace_regs_has_args(fregs) helper is added which code
can use to check when these are usable.
Co-developed-by: Florent Revest <revest@chromium.org>
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20221103170520.931305-4-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
||
Sathvika Vasireddy
|
280981d699 |
objtool: Add --mnop as an option to --mcount
Some architectures (powerpc) may not support ftrace locations being nop'ed out at build time. Introduce CONFIG_HAVE_OBJTOOL_NOP_MCOUNT for objtool, as a means for architectures to enable nop'ing of ftrace locations. Add --mnop as an option to objtool --mcount, to indicate support for the same. Also, make sure that --mnop can be passed as an option to objtool only when --mcount is passed. Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Sathvika Vasireddy <sv@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221114175754.1131267-12-sv@linux.ibm.com |
||
Peter Zijlstra (Intel)
|
9440155ccb |
ftrace: Add HAVE_DYNAMIC_FTRACE_NO_PATCHABLE
x86 will shortly start using -fpatchable-function-entry for purposes other than ftrace, make sure the __patchable_function_entry section isn't merged in the mcount_loc section. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20220903131154.420467-2-jolsa@kernel.org |
||
Daniel Bristot de Oliveira
|
102227b970 |
rv: Add Runtime Verification (RV) interface
RV is a lightweight (yet rigorous) method that complements classical
exhaustive verification techniques (such as model checking and
theorem proving) with a more practical approach to complex systems.
RV works by analyzing the trace of the system's actual execution,
comparing it against a formal specification of the system behavior.
RV can give precise information on the runtime behavior of the
monitored system while enabling the reaction for unexpected
events, avoiding, for example, the propagation of a failure on
safety-critical systems.
The development of this interface roots in the development of the
paper:
De Oliveira, Daniel Bristot; Cucinotta, Tommaso; De Oliveira, Romulo
Silva. Efficient formal verification for the Linux kernel. In:
International Conference on Software Engineering and Formal Methods.
Springer, Cham, 2019. p. 315-332.
And:
De Oliveira, Daniel Bristot. Automata-based formal analysis
and verification of the real-time Linux kernel. PhD Thesis, 2020.
The RV interface resembles the tracing/ interface on purpose. The current
path for the RV interface is /sys/kernel/tracing/rv/.
It presents these files:
"available_monitors"
- List the available monitors, one per line.
For example:
# cat available_monitors
wip
wwnr
"enabled_monitors"
- Lists the enabled monitors, one per line;
- Writing to it enables a given monitor;
- Writing a monitor name with a '!' prefix disables it;
- Truncating the file disables all enabled monitors.
For example:
# cat enabled_monitors
# echo wip > enabled_monitors
# echo wwnr >> enabled_monitors
# cat enabled_monitors
wip
wwnr
# echo '!wip' >> enabled_monitors
# cat enabled_monitors
wwnr
# echo > enabled_monitors
# cat enabled_monitors
#
Note that more than one monitor can be enabled concurrently.
"monitoring_on"
- It is an on/off general switcher for monitoring. Note
that it does not disable enabled monitors or detach events,
but stop the per-entity monitors of monitoring the events
received from the system. It resembles the "tracing_on" switcher.
"monitors/"
Each monitor will have its one directory inside "monitors/". There
the monitor specific files will be presented.
The "monitors/" directory resembles the "events" directory on
tracefs.
For example:
# cd monitors/wip/
# ls
desc enable
# cat desc
wakeup in preemptive per-cpu testing monitor.
# cat enable
0
For further information, see the comments in the header of
kernel/trace/rv/rv.c from this patch.
Link: https://lkml.kernel.org/r/a4bfe038f50cb047bfb343ad0e12b0e646ab308b.1659052063.git.bristot@kernel.org
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Gabriele Paoloni <gpaoloni@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Tao Zhou <tao.zhou@linux.dev>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
||
Steven Rostedt (Google)
|
0a6d7d4541 |
ftrace: Be more specific about arch impact when function tracer is enabled
It was brought up that on ARMv7, that because the FUNCTION_TRACER does not
use nops to keep function tracing disabled because of the use of a link
register, it does have some performance impact.
The start of functions when -pg is used to compile the kernel is:
push {lr}
bl 8010e7c0 <__gnu_mcount_nc>
When function tracing is tuned off, it becomes:
push {lr}
add sp, sp, #4
Which just puts the stack back to its normal location. But these two
instructions at the start of every function does incur some overhead.
Be more honest in the Kconfig FUNCTION_TRACER description and specify that
the overhead being in the noise was x86 specific, but other architectures
may vary.
Link: https://lore.kernel.org/all/20220705105416.GE5208@pengutronix.de/
Link: https://lkml.kernel.org/r/20220706161231.085a83da@gandalf.local.home
Reported-by: Sascha Hauer <sha@pengutronix.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
||
|
Linus Torvalds
|
22922deae1 |
Objtool changes for this cycle were:
- Comprehensive interface overhaul:
=================================
Objtool's interface has some issues:
- Several features are done unconditionally, without any way to turn
them off. Some of them might be surprising. This makes objtool
tricky to use, and prevents porting individual features to other
arches.
- The config dependencies are too coarse-grained. Objtool enablement is
tied to CONFIG_STACK_VALIDATION, but it has several other features
independent of that.
- The objtool subcmds ("check" and "orc") are clumsy: "check" is really
a subset of "orc", so it has all the same options. The subcmd model
has never really worked for objtool, as it only has a single purpose:
"do some combination of things on an object file".
- The '--lto' and '--vmlinux' options are nonsensical and have
surprising behavior.
Overhaul the interface:
- get rid of subcmds
- make all features individually selectable
- remove and/or clarify confusing/obsolete options
- update the documentation
- fix some bugs found along the way
- Fix x32 regression
- Fix Kbuild cleanup bugs
- Add scripts/objdump-func helper script to disassemble a single function from an object file.
- Rewrite scripts/faddr2line to be section-aware, by basing it on 'readelf',
moving it away from 'nm', which doesn't handle multiple sections well,
which can result in decoding failure.
- Rewrite & fix symbol handling - which had a number of bugs wrt. object files
that don't have global symbols - which is rare but possible. Also fix a
bunch of symbol handling bugs found along the way.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ARdm
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- Comprehensive interface overhaul:
=================================
Objtool's interface has some issues:
- Several features are done unconditionally, without any way to
turn them off. Some of them might be surprising. This makes
objtool tricky to use, and prevents porting individual features
to other arches.
- The config dependencies are too coarse-grained. Objtool
enablement is tied to CONFIG_STACK_VALIDATION, but it has several
other features independent of that.
- The objtool subcmds ("check" and "orc") are clumsy: "check" is
really a subset of "orc", so it has all the same options.
The subcmd model has never really worked for objtool, as it only
has a single purpose: "do some combination of things on an object
file".
- The '--lto' and '--vmlinux' options are nonsensical and have
surprising behavior.
Overhaul the interface:
- get rid of subcmds
- make all features individually selectable
- remove and/or clarify confusing/obsolete options
- update the documentation
- fix some bugs found along the way
- Fix x32 regression
- Fix Kbuild cleanup bugs
- Add scripts/objdump-func helper script to disassemble a single
function from an object file.
- Rewrite scripts/faddr2line to be section-aware, by basing it on
'readelf', moving it away from 'nm', which doesn't handle multiple
sections well, which can result in decoding failure.
- Rewrite & fix symbol handling - which had a number of bugs wrt.
object files that don't have global symbols - which is rare but
possible. Also fix a bunch of symbol handling bugs found along the
way.
* tag 'objtool-core-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
objtool: Fix objtool regression on x32 systems
objtool: Fix symbol creation
scripts/faddr2line: Fix overlapping text section failures
scripts: Create objdump-func helper script
objtool: Remove libsubcmd.a when make clean
objtool: Remove inat-tables.c when make clean
objtool: Update documentation
objtool: Remove --lto and --vmlinux in favor of --link
objtool: Add HAVE_NOINSTR_VALIDATION
objtool: Rename "VMLINUX_VALIDATION" -> "NOINSTR_VALIDATION"
objtool: Make noinstr hacks optional
objtool: Make jump label hack optional
objtool: Make static call annotation optional
objtool: Make stack validation frame-pointer-specific
objtool: Add CONFIG_OBJTOOL
objtool: Extricate sls from stack validation
objtool: Rework ibt and extricate from stack validation
objtool: Make stack validation optional
objtool: Add option to print section addresses
objtool: Don't print parentheses in function addresses
...
|
||
Josh Poimboeuf
|
03f16cd020 |
objtool: Add CONFIG_OBJTOOL
Now that stack validation is an optional feature of objtool, add CONFIG_OBJTOOL and replace most usages of CONFIG_STACK_VALIDATION with it. CONFIG_STACK_VALIDATION can now be considered to be frame-pointer specific. CONFIG_UNWINDER_ORC is already inherently valid for live patching, so no need to "validate" it. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Link: https://lkml.kernel.org/r/939bf3d85604b2a126412bf11af6e3bd3b872bcb.1650300597.git.jpoimboe@redhat.com |
||
Paul E. McKenney
|
835f14ed53 |
rcu: Make the TASKS_RCU Kconfig option be selected
Currently, any kernel built with CONFIG_PREEMPTION=y also gets CONFIG_TASKS_RCU=y, which is not helpful to people trying to build preemptible kernels of minimal size. Because CONFIG_TASKS_RCU=y is needed only in kernels doing tracing of one form or another, this commit moves from TASKS_RCU deciding when it should be enabled to the tracing Kconfig options explicitly selecting it. This allows building preemptible kernels without TASKS_RCU, if desired. This commit also updates the SRCU-N and TREE09 rcutorture scenarios in order to avoid Kconfig errors that would otherwise result from CONFIG_TASKS_RCU being selected without its CONFIG_RCU_EXPERT dependency being met. [ paulmck: Apply BPF_SYSCALL feedback from Andrii Nakryiko. ] Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Tested-by: Zhouyi Zhou <zhouzhouyi@gmail.com> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> |
||
|
Steven Rostedt (Google)
|
1cd927ad6f |
tracing: mark user_events as BROKEN
After being merged, user_events become more visible to a wider audience that have concerns with the current API. It is too late to fix this for this release, but instead of a full revert, just mark it as BROKEN (which prevents it from being selected in make config). Then we can work finding a better API. If that fails, then it will need to be completely reverted. To not have the code silently bitrot, still allow building it with COMPILE_TEST. And to prevent the uapi header from being installed, then later changed, and then have an old distro user space see the old version, move the header file out of the uapi directory. Surround the include with CONFIG_COMPILE_TEST to the current location, but when the BROKEN tag is taken off, it will use the uapi directory, and fail to compile. This is a good way to remind us to move the header back. Link: https://lore.kernel.org/all/20220330155835.5e1f6669@gandalf.local.home Link: https://lkml.kernel.org/r/20220330201755.29319-1-mathieu.desnoyers@efficios.com Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
169e77764a |
Networking changes for 5.18.
Core
----
- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.
- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).
- Continue the work of annotating packet drop reasons throughout
the stack.
- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.
- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.
- Extend the ref_tracker to allow catching use-after-free bugs.
BPF
---
- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower
iTLB pressure and prevents identity mapping huge pages from
getting split.
- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.
- Convert the BPF preload to use light skeleton and drop
the user-mode-driver dependency.
- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.
- Allow local storage memory to be allocated with GFP_KERNEL if called
from a hook allowed to sleep.
- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).
- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.
- Allow cgroup BPF progs to return custom errors to user space.
- Add support for AF_UNIX iterator batching.
- Allow iterator programs to use sleepable helpers.
- Support JIT of add, and, or, xor and xchg atomic ops on arm64.
- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.
- Large number of libbpf API improvements, cleanups and deprecations.
Protocols
---------
- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.
- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.
- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.
- Support inserting IPv6 IOAM information to a fraction of frames.
- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)
- Support setting socket and IPv6 options via cmsg on ping6 sockets.
- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.
- Add support for locked bridge ports (for 802.1X).
- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.
- IPv6 extension header handling in Open vSwitch.
- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.
- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY
- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)
- Multi-BSSID beacon handling in AP mode for WiFi.
- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events
- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements
- Increase the max PDU size in CAN ISOTP to 64 kB.
Driver API
----------
- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.
- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.
- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.
- Add header/data split indication to guide user space enabling
of TCP zero-copy Rx.
- Allow configuring completion queue event size.
- Refactor page_pool to enable fragmenting after allocation.
- Add allocation and page reuse statistics to page_pool.
- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.
- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering
New hardware / drivers
----------------------
- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches
- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6
- Mobile:
- iosm: Intel M.2 7360 WWAN card
Drivers
-------
- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.
- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support
- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions
- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP
- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support
- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports
- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload
- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches
- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock
- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets
- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode
- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices
- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915
- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan
- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ELpe
-----END PGP SIGNATURE-----
Merge tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"The sprinkling of SPI drivers is because we added a new one and Mark
sent us a SPI driver interface conversion pull request.
Core
----
- Introduce XDP multi-buffer support, allowing the use of XDP with
jumbo frame MTUs and combination with Rx coalescing offloads (LRO).
- Speed up netns dismantling (5x) and lower the memory cost a little.
Remove unnecessary per-netns sockets. Scope some lists to a netns.
Cut down RCU syncing. Use batch methods. Allow netdev registration
to complete out of order.
- Support distinguishing timestamp types (ingress vs egress) and
maintaining them across packet scrubbing points (e.g. redirect).
- Continue the work of annotating packet drop reasons throughout the
stack.
- Switch netdev error counters from an atomic to dynamically
allocated per-CPU counters.
- Rework a few preempt_disable(), local_irq_save() and busy waiting
sections problematic on PREEMPT_RT.
- Extend the ref_tracker to allow catching use-after-free bugs.
BPF
---
- Introduce "packing allocator" for BPF JIT images. JITed code is
marked read only, and used to be allocated at page granularity.
Custom allocator allows for more efficient memory use, lower iTLB
pressure and prevents identity mapping huge pages from getting
split.
- Make use of BTF type annotations (e.g. __user, __percpu) to enforce
the correct probe read access method, add appropriate helpers.
- Convert the BPF preload to use light skeleton and drop the
user-mode-driver dependency.
- Allow XDP BPF_PROG_RUN test infra to send real packets, enabling
its use as a packet generator.
- Allow local storage memory to be allocated with GFP_KERNEL if
called from a hook allowed to sleep.
- Introduce fprobe (multi kprobe) to speed up mass attachment (arch
bits to come later).
- Add unstable conntrack lookup helpers for BPF by using the BPF
kfunc infra.
- Allow cgroup BPF progs to return custom errors to user space.
- Add support for AF_UNIX iterator batching.
- Allow iterator programs to use sleepable helpers.
- Support JIT of add, and, or, xor and xchg atomic ops on arm64.
- Add BTFGen support to bpftool which allows to use CO-RE in kernels
without BTF info.
- Large number of libbpf API improvements, cleanups and deprecations.
Protocols
---------
- Micro-optimize UDPv6 Tx, gaining up to 5% in test on dummy netdev.
- Adjust TSO packet sizes based on min_rtt, allowing very low latency
links (data centers) to always send full-sized TSO super-frames.
- Make IPv6 flow label changes (AKA hash rethink) more configurable,
via sysctl and setsockopt. Distinguish between server and client
behavior.
- VxLAN support to "collect metadata" devices to terminate only
configured VNIs. This is similar to VLAN filtering in the bridge.
- Support inserting IPv6 IOAM information to a fraction of frames.
- Add protocol attribute to IP addresses to allow identifying where
given address comes from (kernel-generated, DHCP etc.)
- Support setting socket and IPv6 options via cmsg on ping6 sockets.
- Reject mis-use of ECN bits in IP headers as part of DSCP/TOS.
Define dscp_t and stop taking ECN bits into account in fib-rules.
- Add support for locked bridge ports (for 802.1X).
- tun: support NAPI for packets received from batched XDP buffs,
doubling the performance in some scenarios.
- IPv6 extension header handling in Open vSwitch.
- Support IPv6 control message load balancing in bonding, prevent
neighbor solicitation and advertisement from using the wrong port.
Support NS/NA monitor selection similar to existing ARP monitor.
- SMC
- improve performance with TCP_CORK and sendfile()
- support auto-corking
- support TCP_NODELAY
- MCTP (Management Component Transport Protocol)
- add user space tag control interface
- I2C binding driver (as specified by DMTF DSP0237)
- Multi-BSSID beacon handling in AP mode for WiFi.
- Bluetooth:
- handle MSFT Monitor Device Event
- add MGMT Adv Monitor Device Found/Lost events
- Multi-Path TCP:
- add support for the SO_SNDTIMEO socket option
- lots of selftest cleanups and improvements
- Increase the max PDU size in CAN ISOTP to 64 kB.
Driver API
----------
- Add HW counters for SW netdevs, a mechanism for devices which
offload packet forwarding to report packet statistics back to
software interfaces such as tunnels.
- Select the default NIC queue count as a fraction of number of
physical CPU cores, instead of hard-coding to 8.
- Expose devlink instance locks to drivers. Allow device layer of
drivers to use that lock directly instead of creating their own
which always runs into ordering issues in devlink callbacks.
- Add header/data split indication to guide user space enabling of
TCP zero-copy Rx.
- Allow configuring completion queue event size.
- Refactor page_pool to enable fragmenting after allocation.
- Add allocation and page reuse statistics to page_pool.
- Improve Multiple Spanning Trees support in the bridge to allow
reuse of topologies across VLANs, saving HW resources in switches.
- DSA (Distributed Switch Architecture):
- replay and offload of host VLAN entries
- offload of static and local FDB entries on LAG interfaces
- FDB isolation and unicast filtering
New hardware / drivers
----------------------
- Ethernet:
- LAN937x T1 PHYs
- Davicom DM9051 SPI NIC driver
- Realtek RTL8367S, RTL8367RB-VB switch and MDIO
- Microchip ksz8563 switches
- Netronome NFP3800 SmartNICs
- Fungible SmartNICs
- MediaTek MT8195 switches
- WiFi:
- mt76: MediaTek mt7916
- mt76: MediaTek mt7921u USB adapters
- brcmfmac: Broadcom BCM43454/6
- Mobile:
- iosm: Intel M.2 7360 WWAN card
Drivers
-------
- Convert many drivers to the new phylink API built for split PCS
designs but also simplifying other cases.
- Intel Ethernet NICs:
- add TTY for GNSS module for E810T device
- improve AF_XDP performance
- GTP-C and GTP-U filter offload
- QinQ VLAN support
- Mellanox Ethernet NICs (mlx5):
- support xdp->data_meta
- multi-buffer XDP
- offload tc push_eth and pop_eth actions
- Netronome Ethernet NICs (nfp):
- flow-independent tc action hardware offload (police / meter)
- AF_XDP
- Other Ethernet NICs:
- at803x: fiber and SFP support
- xgmac: mdio: preamble suppression and custom MDC frequencies
- r8169: enable ASPM L1.2 if system vendor flags it as safe
- macb/gem: ZynqMP SGMII
- hns3: add TX push mode
- dpaa2-eth: software TSO
- lan743x: multi-queue, mdio, SGMII, PTP
- axienet: NAPI and GRO support
- Mellanox Ethernet switches (mlxsw):
- source and dest IP address rewrites
- RJ45 ports
- Marvell Ethernet switches (prestera):
- basic routing offload
- multi-chain TC ACL offload
- NXP embedded Ethernet switches (ocelot & felix):
- PTP over UDP with the ocelot-8021q DSA tagging protocol
- basic QoS classification on Felix DSA switch using dcbnl
- port mirroring for ocelot switches
- Microchip high-speed industrial Ethernet (sparx5):
- offloading of bridge port flooding flags
- PTP Hardware Clock
- Other embedded switches:
- lan966x: PTP Hardward Clock
- qca8k: mdio read/write operations via crafted Ethernet packets
- Qualcomm 802.11ax WiFi (ath11k):
- add LDPC FEC type and 802.11ax High Efficiency data in radiotap
- enable RX PPDU stats in monitor co-exist mode
- Intel WiFi (iwlwifi):
- UHB TAS enablement via BIOS
- band disablement via BIOS
- channel switch offload
- 32 Rx AMPDU sessions in newer devices
- MediaTek WiFi (mt76):
- background radar detection
- thermal management improvements on mt7915
- SAR support for more mt76 platforms
- MBSSID and 6 GHz band on mt7915
- RealTek WiFi:
- rtw89: AP mode
- rtw89: 160 MHz channels and 6 GHz band
- rtw89: hardware scan
- Bluetooth:
- mt7921s: wake on Bluetooth, SCO over I2S, wide-band-speed (WBS)
- Microchip CAN (mcp251xfd):
- multiple RX-FIFOs and runtime configurable RX/TX rings
- internal PLL, runtime PM handling simplification
- improve chip detection and error handling after wakeup"
* tag 'net-next-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2521 commits)
llc: fix netdevice reference leaks in llc_ui_bind()
drivers: ethernet: cpsw: fix panic when interrupt coaleceing is set via ethtool
ice: don't allow to run ice_send_event_to_aux() in atomic ctx
ice: fix 'scheduling while atomic' on aux critical err interrupt
net/sched: fix incorrect vlan_push_eth dest field
net: bridge: mst: Restrict info size queries to bridge ports
net: marvell: prestera: add missing destroy_workqueue() in prestera_module_init()
drivers: net: xgene: Fix regression in CRC stripping
net: geneve: add missing netlink policy and size for IFLA_GENEVE_INNER_PROTO_INHERIT
net: dsa: fix missing host-filtered multicast addresses
net/mlx5e: Fix build warning, detected write beyond size of field
iwlwifi: mvm: Don't fail if PPAG isn't supported
selftests/bpf: Fix kprobe_multi test.
Revert "rethook: x86: Add rethook x86 implementation"
Revert "arm64: rethook: Add arm64 rethook implementation"
Revert "powerpc: Add rethook support"
Revert "ARM: rethook: Add rethook arm implementation"
netdevice: add missing dm_private kdoc
net: bridge: mst: prevent NULL deref in br_mst_info_size()
selftests: forwarding: Use same VRF for port and VLAN upper
...
|
||
|
Masami Hiramatsu
|
5b0ab78998 |
fprobe: Add exit_handler support
Add exit_handler to fprobe. fprobe + rethook allows us to hook the kernel function return. The rethook will be enabled only if the fprobe::exit_handler is set. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Tested-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/164735290790.1084943.10601965782208052202.stgit@devnote2 |
||
|
Masami Hiramatsu
|
54ecbe6f1e |
rethook: Add a generic return hook
Add a return hook framework which hooks the function return. Most of the logic came from the kretprobe, but this is independent from kretprobe. Note that this is expected to be used with other function entry hooking feature, like ftrace, fprobe, adn kprobes. Eventually this will replace the kretprobe (e.g. kprobe + rethook = kretprobe), but at this moment, this is just an additional hook. Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Tested-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/164735285066.1084943.9259661137330166643.stgit@devnote2 |
||
|
Masami Hiramatsu
|
cad9931f64 |
fprobe: Add ftrace based probe APIs
The fprobe is a wrapper API for ftrace function tracer.
Unlike kprobes, this probes only supports the function entry, but this
can probe multiple functions by one fprobe. The usage is similar, user
will set their callback to fprobe::entry_handler and call
register_fprobe*() with probed functions.
There are 3 registration interfaces,
- register_fprobe() takes filtering patterns of the functin names.
- register_fprobe_ips() takes an array of ftrace-location addresses.
- register_fprobe_syms() takes an array of function names.
The registered fprobes can be unregistered with unregister_fprobe().
e.g.
struct fprobe fp = { .entry_handler = user_handler };
const char *targets[] = { "func1", "func2", "func3"};
...
ret = register_fprobe_syms(&fp, targets, ARRAY_SIZE(targets));
...
unregister_fprobe(&fp);
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Tested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/164735283857.1084943.1154436951479395551.stgit@devnote2
|
||
Beau Belgrave
|
7f5a08c79d |
user_events: Add minimal support for trace_event into ftrace
Minimal support for interacting with dynamic events, trace_event and
ftrace. Core outline of flow between user process, ioctl and trace_event
APIs.
User mode processes that wish to use trace events to get data into
ftrace, perf, eBPF, etc are limited to uprobes today. The user events
features enables an ABI for user mode processes to create and write to
trace events that are isolated from kernel level trace events. This
enables a faster path for tracing from user mode data as well as opens
managed code to participate in trace events, where stub locations are
dynamic.
User processes often want to trace only when it's useful. To enable this
a set of pages are mapped into the user process space that indicate the
current state of the user events that have been registered. User
processes can check if their event is hooked to a trace/probe, and if it
is, emit the event data out via the write() syscall.
Two new files are introduced into tracefs to accomplish this:
user_events_status - This file is mmap'd into participating user mode
processes to indicate event status.
user_events_data - This file is opened and register/delete ioctl's are
issued to create/open/delete trace events that can be used for tracing.
The typical scenario is on process start to mmap user_events_status. Processes
then register the events they plan to use via the REG ioctl. The ioctl reads
and updates the passed in user_reg struct. The status_index of the struct is
used to know the byte in the status page to check for that event. The
write_index of the struct is used to describe that event when writing out to
the fd that was used for the ioctl call. The data must always include this
index first when writing out data for an event. Data can be written either by
write() or by writev().
For example, in memory:
int index;
char data[];
Psuedo code example of typical usage:
struct user_reg reg;
int page_fd = open("user_events_status", O_RDWR);
char *page_data = mmap(NULL, PAGE_SIZE, PROT_READ, MAP_SHARED, page_fd, 0);
close(page_fd);
int data_fd = open("user_events_data", O_RDWR);
reg.size = sizeof(reg);
reg.name_args = (__u64)"test";
ioctl(data_fd, DIAG_IOCSREG, ®);
int status_id = reg.status_index;
int write_id = reg.write_index;
struct iovec io[2];
io[0].iov_base = &write_id;
io[0].iov_len = sizeof(write_id);
io[1].iov_base = payload;
io[1].iov_len = sizeof(payload);
if (page_data[status_id])
writev(data_fd, io, 2);
User events are also exposed via the dynamic_events tracefs file for
both create and delete. Current status is exposed via the user_events_status
tracefs file.
Simple example to register a user event via dynamic_events:
echo u:test >> dynamic_events
cat dynamic_events
u:test
If an event is hooked to a probe, the probe hooked shows up:
echo 1 > events/user_events/test/enable
cat user_events_status
1:test # Used by ftrace
Active: 1
Busy: 1
Max: 4096
If an event is not hooked to a probe, no probe status shows up:
echo 0 > events/user_events/test/enable
cat user_events_status
1:test
Active: 1
Busy: 0
Max: 4096
Users can describe the trace event format via the following format:
name[:FLAG1[,FLAG2...] [field1[;field2...]]
Each field has the following format:
type name
Example for char array with a size of 20 named msg:
echo 'u:detailed char[20] msg' >> dynamic_events
cat dynamic_events
u:detailed char[20] msg
Data offsets are based on the data written out via write() and will be
updated to reflect the correct offset in the trace_event fields. For dynamic
data it is recommended to use the new __rel_loc data type. This type will be
the same as __data_loc, but the offset is relative to this entry. This allows
user_events to not worry about what common fields are being inserted before
the data.
The above format is valid for both the ioctl and the dynamic_events file.
Link: https://lkml.kernel.org/r/20220118204326.2169-2-beaub@linux.microsoft.com
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
||
|
Steven Rostedt (Google)
|
4ed308c445 |
ftrace: Have architectures opt-in for mcount build time sorting
First S390 complained that the sorting of the mcount sections at build
time caused the kernel to crash on their architecture. Now PowerPC is
complaining about it too. And also ARM64 appears to be having issues.
It may be necessary to also update the relocation table for the values
in the mcount table. Not only do we have to sort the table, but also
update the relocations that may be applied to the items in the table.
If the system is not relocatable, then it is fine to sort, but if it is,
some architectures may have issues (although x86 does not as it shifts all
addresses the same).
Add a HAVE_BUILDTIME_MCOUNT_SORT that an architecture can set to say it is
safe to do the sorting at build time.
Also update the config to compile in build time sorting in the sorttable
code in scripts/ to depend on CONFIG_BUILDTIME_MCOUNT_SORT.
Link: https://lore.kernel.org/all/944D10DA-8200-4BA9-8D0A-3BED9AA99F82@linux.ibm.com/
Link: https://lkml.kernel.org/r/20220127153821.3bc1ac6e@gandalf.local.home
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Yinan Liu <yinan@linux.alibaba.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Reported-by: Sachin Sant <sachinp@linux.ibm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com> [arm64]
Tested-by: Sachin Sant <sachinp@linux.ibm.com>
Fixes:
|
||
|
Steven Rostedt (Google)
|
6b9b641370 |
ftrace: Fix assuming build time sort works for s390
To speed up the boot process, as mcount_loc needs to be sorted for ftrace
to work properly, sorting it at build time is more efficient than boot up
and can save milliseconds of time. Unfortunately, this change broke s390
as it will modify the mcount_loc location after the sorting takes place
and will put back the unsorted locations. Since the sorting is skipped at
boot up if it is believed that it was sorted at run time, ftrace can crash
as its algorithms are dependent on the list being sorted.
Add a new config BUILDTIME_MCOUNT_SORT that is set when
BUILDTIME_TABLE_SORT but not if S390 is set. Use this config to determine
if sorting should take place at boot up.
Link: https://lore.kernel.org/all/yt9dee51ctfn.fsf@linux.ibm.com/
Fixes:
|
||
|
Steven Rostedt (VMware)
|
8147dc78e6 |
ftrace: Add test to make sure compiled time sorts work
Now that ftrace function pointers are sorted at compile time, add a test that makes sure they are sorted at run time. This test is only run if it is configured in. Link: https://lkml.kernel.org/r/20211206151858.4d21a24d@gandalf.local.home Cc: Yinan Liu <yinan@linux.alibaba.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
||
Masahiro Yamada
|
de32951b29 |
tracing: Simplify the Kconfig dependency of FTRACE
The entire FTRACE block is surrounded by 'if TRACING_SUPPORT' ... 'endif'. Using 'depends on' is a simpler way to guard FTRACE. Link: https://lkml.kernel.org/r/20210731052233.4703-1-masahiroy@kernel.org Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
||
Lukas Bulwahn
|
12f9951d3f |
tracing: define needed config DYNAMIC_FTRACE_WITH_ARGS
Commit |
||
Daniel Bristot de Oliveira
|
a955d7eac1 |
trace: Add timerlat tracer
The timerlat tracer aims to help the preemptive kernel developers to
found souces of wakeup latencies of real-time threads. Like cyclictest,
the tracer sets a periodic timer that wakes up a thread. The thread then
computes a *wakeup latency* value as the difference between the *current
time* and the *absolute time* that the timer was set to expire. The main
goal of timerlat is tracing in such a way to help kernel developers.
Usage
Write the ASCII text "timerlat" into the current_tracer file of the
tracing system (generally mounted at /sys/kernel/tracing).
For example:
[root@f32 ~]# cd /sys/kernel/tracing/
[root@f32 tracing]# echo timerlat > current_tracer
It is possible to follow the trace by reading the trace trace file:
[root@f32 tracing]# cat trace
# tracer: timerlat
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth
# || /
# |||| ACTIVATION
# TASK-PID CPU# |||| TIMESTAMP ID CONTEXT LATENCY
# | | | |||| | | | |
<idle>-0 [000] d.h1 54.029328: #1 context irq timer_latency 932 ns
<...>-867 [000] .... 54.029339: #1 context thread timer_latency 11700 ns
<idle>-0 [001] dNh1 54.029346: #1 context irq timer_latency 2833 ns
<...>-868 [001] .... 54.029353: #1 context thread timer_latency 9820 ns
<idle>-0 [000] d.h1 54.030328: #2 context irq timer_latency 769 ns
<...>-867 [000] .... 54.030330: #2 context thread timer_latency 3070 ns
<idle>-0 [001] d.h1 54.030344: #2 context irq timer_latency 935 ns
<...>-868 [001] .... 54.030347: #2 context thread timer_latency 4351 ns
The tracer creates a per-cpu kernel thread with real-time priority that
prints two lines at every activation. The first is the *timer latency*
observed at the *hardirq* context before the activation of the thread.
The second is the *timer latency* observed by the thread, which is the
same level that cyclictest reports. The ACTIVATION ID field
serves to relate the *irq* execution to its respective *thread* execution.
The irq/thread splitting is important to clarify at which context
the unexpected high value is coming from. The *irq* context can be
delayed by hardware related actions, such as SMIs, NMIs, IRQs
or by a thread masking interrupts. Once the timer happens, the delay
can also be influenced by blocking caused by threads. For example, by
postponing the scheduler execution via preempt_disable(), by the
scheduler execution, or by masking interrupts. Threads can
also be delayed by the interference from other threads and IRQs.
The timerlat can also take advantage of the osnoise: traceevents.
For example:
[root@f32 ~]# cd /sys/kernel/tracing/
[root@f32 tracing]# echo timerlat > current_tracer
[root@f32 tracing]# echo osnoise > set_event
[root@f32 tracing]# echo 25 > osnoise/stop_tracing_total_us
[root@f32 tracing]# tail -10 trace
cc1-87882 [005] d..h... 548.771078: #402268 context irq timer_latency 1585 ns
cc1-87882 [005] dNLh1.. 548.771082: irq_noise: local_timer:236 start 548.771077442 duration 4597 ns
cc1-87882 [005] dNLh2.. 548.771083: irq_noise: reschedule:253 start 548.771083017 duration 56 ns
cc1-87882 [005] dNLh2.. 548.771086: irq_noise: call_function_single:251 start 548.771083811 duration 2048 ns
cc1-87882 [005] dNLh2.. 548.771088: irq_noise: call_function_single:251 start 548.771086814 duration 1495 ns
cc1-87882 [005] dNLh2.. 548.771091: irq_noise: call_function_single:251 start 548.771089194 duration 1558 ns
cc1-87882 [005] dNLh2.. 548.771094: irq_noise: call_function_single:251 start 548.771091719 duration 1932 ns
cc1-87882 [005] dNLh2.. 548.771096: irq_noise: call_function_single:251 start 548.771094696 duration 1050 ns
cc1-87882 [005] d...3.. 548.771101: thread_noise: cc1:87882 start 548.771078243 duration 10909 ns
timerlat/5-1035 [005] ....... 548.771103: #402268 context thread timer_latency 25960 ns
For further information see: Documentation/trace/timerlat-tracer.rst
Link: https://lkml.kernel.org/r/71f18efc013e1194bcaea1e54db957de2b19ba62.1624372313.git.bristot@redhat.com
Cc: Phil Auld <pauld@redhat.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Kate Carcia <kcarcia@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexandre Chartre <alexandre.chartre@oracle.com>
Cc: Clark Willaims <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
||
|
Daniel Bristot de Oliveira
|
bce29ac9ce |
trace: Add osnoise tracer
In the context of high-performance computing (HPC), the Operating System
Noise (*osnoise*) refers to the interference experienced by an application
due to activities inside the operating system. In the context of Linux,
NMIs, IRQs, SoftIRQs, and any other system thread can cause noise to the
system. Moreover, hardware-related jobs can also cause noise, for example,
via SMIs.
The osnoise tracer leverages the hwlat_detector by running a similar
loop with preemption, SoftIRQs and IRQs enabled, thus allowing all
the sources of *osnoise* during its execution. Using the same approach
of hwlat, osnoise takes note of the entry and exit point of any
source of interferences, increasing a per-cpu interference counter. The
osnoise tracer also saves an interference counter for each source of
interference. The interference counter for NMI, IRQs, SoftIRQs, and
threads is increased anytime the tool observes these interferences' entry
events. When a noise happens without any interference from the operating
system level, the hardware noise counter increases, pointing to a
hardware-related noise. In this way, osnoise can account for any
source of interference. At the end of the period, the osnoise tracer
prints the sum of all noise, the max single noise, the percentage of CPU
available for the thread, and the counters for the noise sources.
Usage
Write the ASCII text "osnoise" into the current_tracer file of the
tracing system (generally mounted at /sys/kernel/tracing).
For example::
[root@f32 ~]# cd /sys/kernel/tracing/
[root@f32 tracing]# echo osnoise > current_tracer
It is possible to follow the trace by reading the trace trace file::
[root@f32 tracing]# cat trace
# tracer: osnoise
#
# _-----=> irqs-off
# / _----=> need-resched
# | / _---=> hardirq/softirq
# || / _--=> preempt-depth MAX
# || / SINGLE Interference counters:
# |||| RUNTIME NOISE % OF CPU NOISE +-----------------------------+
# TASK-PID CPU# |||| TIMESTAMP IN US IN US AVAILABLE IN US HW NMI IRQ SIRQ THREAD
# | | | |||| | | | | | | | | | |
<...>-859 [000] .... 81.637220: 1000000 190 99.98100 9 18 0 1007 18 1
<...>-860 [001] .... 81.638154: 1000000 656 99.93440 74 23 0 1006 16 3
<...>-861 [002] .... 81.638193: 1000000 5675 99.43250 202 6 0 1013 25 21
<...>-862 [003] .... 81.638242: 1000000 125 99.98750 45 1 0 1011 23 0
<...>-863 [004] .... 81.638260: 1000000 1721 99.82790 168 7 0 1002 49 41
<...>-864 [005] .... 81.638286: 1000000 263 99.97370 57 6 0 1006 26 2
<...>-865 [006] .... 81.638302: 1000000 109 99.98910 21 3 0 1006 18 1
<...>-866 [007] .... 81.638326: 1000000 7816 99.21840 107 8 0 1016 39 19
In addition to the regular trace fields (from TASK-PID to TIMESTAMP), the
tracer prints a message at the end of each period for each CPU that is
running an osnoise/CPU thread. The osnoise specific fields report:
- The RUNTIME IN USE reports the amount of time in microseconds that
the osnoise thread kept looping reading the time.
- The NOISE IN US reports the sum of noise in microseconds observed
by the osnoise tracer during the associated runtime.
- The % OF CPU AVAILABLE reports the percentage of CPU available for
the osnoise thread during the runtime window.
- The MAX SINGLE NOISE IN US reports the maximum single noise observed
during the runtime window.
- The Interference counters display how many each of the respective
interference happened during the runtime window.
Note that the example above shows a high number of HW noise samples.
The reason being is that this sample was taken on a virtual machine,
and the host interference is detected as a hardware interference.
Tracer options
The tracer has a set of options inside the osnoise directory, they are:
- osnoise/cpus: CPUs at which a osnoise thread will execute.
- osnoise/period_us: the period of the osnoise thread.
- osnoise/runtime_us: how long an osnoise thread will look for noise.
- osnoise/stop_tracing_us: stop the system tracing if a single noise
higher than the configured value happens. Writing 0 disables this
option.
- osnoise/stop_tracing_total_us: stop the system tracing if total noise
higher than the configured value happens. Writing 0 disables this
option.
- tracing_threshold: the minimum delta between two time() reads to be
considered as noise, in us. When set to 0, the default value will
be used, which is currently 5 us.
Additional Tracing
In addition to the tracer, a set of tracepoints were added to
facilitate the identification of the osnoise source.
- osnoise:sample_threshold: printed anytime a noise is higher than
the configurable tolerance_ns.
- osnoise:nmi_noise: noise from NMI, including the duration.
- osnoise:irq_noise: noise from an IRQ, including the duration.
- osnoise:softirq_noise: noise from a SoftIRQ, including the
duration.
- osnoise:thread_noise: noise from a thread, including the duration.
Note that all the values are *net values*. For example, if while osnoise
is running, another thread preempts the osnoise thread, it will start a
thread_noise duration at the start. Then, an IRQ takes place, preempting
the thread_noise, starting a irq_noise. When the IRQ ends its execution,
it will compute its duration, and this duration will be subtracted from
the thread_noise, in such a way as to avoid the double accounting of the
IRQ execution. This logic is valid for all sources of noise.
Here is one example of the usage of these tracepoints::
osnoise/8-961 [008] d.h. 5789.857532: irq_noise: local_timer:236 start 5789.857529929 duration 1845 ns
osnoise/8-961 [008] dNh. 5789.858408: irq_noise: local_timer:236 start 5789.858404871 duration 2848 ns
migration/8-54 [008] d... 5789.858413: thread_noise: migration/8:54 start 5789.858409300 duration 3068 ns
osnoise/8-961 [008] .... 5789.858413: sample_threshold: start 5789.858404555 duration 8723 ns interferences 2
In this example, a noise sample of 8 microseconds was reported in the last
line, pointing to two interferences. Looking backward in the trace, the
two previous entries were about the migration thread running after a
timer IRQ execution. The first event is not part of the noise because
it took place one millisecond before.
It is worth noticing that the sum of the duration reported in the
tracepoints is smaller than eight us reported in the sample_threshold.
The reason roots in the overhead of the entry and exit code that happens
before and after any interference execution. This justifies the dual
approach: measuring thread and tracing.
Link: https://lkml.kernel.org/r/e649467042d60e7b62714c9c6751a56299d15119.1624372313.git.bristot@redhat.com
Cc: Phil Auld <pauld@redhat.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Kate Carcia <kcarcia@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexandre Chartre <alexandre.chartre@oracle.com>
Cc: Clark Willaims <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com>
[
Made the following functions static:
trace_irqentry_callback()
trace_irqexit_callback()
trace_intel_irqentry_callback()
trace_intel_irqexit_callback()
Added to include/trace.h:
osnoise_arch_register()
osnoise_arch_unregister()
Fixed define logic for LATENCY_FS_NOTIFY
Reported-by: kernel test robot <lkp@intel.com>
]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
||
Rolf Eike Beer
|
69268094a1 |
tracing: Fix help text of TRACEPOINT_BENCHMARK in Kconfig
It's "cond_resched()" not "cond_sched()". Link: https://lkml.kernel.org/r/1863065.aFVDpXsuPd@devpool47 Signed-off-by: Rolf Eike Beer <eb@emlix.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
||
|
Linus Torvalds
|
414eece95b |
clang-lto for v5.12-rc1 (part2)
- Generate __mcount_loc in objtool (Peter Zijlstra) - Support running objtool against vmlinux.o (Sami Tolvanen) - Clang LTO enablement for x86 (Sami Tolvanen) -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAmA1fn8ACgkQiXL039xt wCbswQ//Zmnq912Ubyn5uPe9SOS/kumGDoqtxGzlZwo/pSB3qFArhD6G07sJ49XD nu/05ZcOda760wubnhcuK91n2fY5i/eGLXMSjfgtdVcco4Q67nPQydc+LGdhuDco FlhL8TAIwqYN1f2nJK1IggZpZFxz5r/r1Pq8q1S0oQRqDenxDBQwNtBba4B1OIxw /FE/1Hp3xwRnuJEP2jREBeY1yQ+Y1n859pZcDgSOWlTArcp8EVUi5hIWJ9DwIe73 mqnx6PcFWEYB0zLNZmZz2gpEac+ncGyme6ChayeuQfInbL5dhx97jFGt3S6/+NSY mF2zyaR/+JsGGuM8dVqH3izKCJXCEAGirrdMO1ndb9HdwS3KnYEiag2ciNWL0wm3 UEM4r0i2B14sU3pkyotKgsJdOSgorMKkQUPb2wW+OUfnkZNEWKLqylMgNXBD80l4 WG5vYQRwwFN9jRBik6Z5YFGnwGsNIoGg1F1GRNMjh6h51adYQeBN/1QJE1FJ5L4D iKzmZYqimKUINXWfI6TNyqiv9TctOt65pxnRyq+MHxfTDzHGyc3MUeCeCiR1a1yI S5QhcgfSnC/NjDA0+oYC6yRlcBtfhjtUqFTGoZ4q4q/LF1BVU1bPyIXZrROLc05s LNMMBcWbJetJxFtm/gYfiVFuNitYtxbBV1krVtsWznCA2nKGJ9w= =htKJ -----END PGP SIGNATURE----- Merge tag 'clang-lto-v5.12-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull more clang LTO updates from Kees Cook: "Clang LTO x86 enablement. Full disclosure: while this has _not_ been in linux-next (since it initially looked like the objtool dependencies weren't going to make v5.12), it has been under daily build and runtime testing by Sami for quite some time. These x86 portions have been discussed on lkml, with Peter, Josh, and others helping nail things down. The bulk of the changes are to get objtool working happily. The rest of the x86 enablement is very small. Summary: - Generate __mcount_loc in objtool (Peter Zijlstra) - Support running objtool against vmlinux.o (Sami Tolvanen) - Clang LTO enablement for x86 (Sami Tolvanen)" Link: https://lore.kernel.org/lkml/20201013003203.4168817-26-samitolvanen@google.com/ Link: https://lore.kernel.org/lkml/cover.1611263461.git.jpoimboe@redhat.com/ * tag 'clang-lto-v5.12-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: kbuild: lto: force rebuilds when switching CONFIG_LTO x86, build: allow LTO to be selected x86, cpu: disable LTO for cpu.c x86, vdso: disable LTO only for vDSO kbuild: lto: postpone objtool objtool: Split noinstr validation from --vmlinux x86, build: use objtool mcount tracing: add support for objtool mcount objtool: Don't autodetect vmlinux.o objtool: Fix __mcount_loc generation with Clang's assembler objtool: Add a pass for generating __mcount_loc |
||
Sami Tolvanen
|
22c8542d7b |
tracing: add support for objtool mcount
This change adds build support for using objtool to generate __mcount_loc sections. Signed-off-by: Sami Tolvanen <samitolvanen@google.com> |
||
|
Linus Torvalds
|
79db4d2293 |
clang-lto series for v5.12-rc1
- Clang LTO build infrastructure and arm64-specific enablement (Sami Tolvanen)
- Recursive build CC_FLAGS_LTO fix (Alexander Lobakin)
-----BEGIN PGP SIGNATURE-----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=6peY
-----END PGP SIGNATURE-----
Merge tag 'clang-lto-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull clang LTO updates from Kees Cook:
"Clang Link Time Optimization.
This is built on the work done preparing for LTO by arm64 folks,
tracing folks, etc. This includes the core changes as well as the
remaining pieces for arm64 (LTO has been the default build method on
Android for about 3 years now, as it is the prerequisite for the
Control Flow Integrity protections).
While x86 LTO enablement is done, it depends on some pending objtool
clean-ups. It's possible that I'll send a "part 2" pull request for
LTO that includes x86 support.
For merge log posterity, and as detailed in commit
|
||
Song Chen
|
4b9091e1c1 |
kernel: trace: preemptirq_delay_test: add cpu affinity
The kernel thread executing test can run on any cpu, which might be different cpu latency tracer is running on, as a result, the big latency caused by preemptirq delay test can't be detected. Therefore, the argument cpu_affinity is added to be passed to test, ensure it's running on the same cpu with latency tracer. e.g. cyclictest -p 90 -m -c 0 -i 1000 -a 3 modprobe preemptirq_delay_test test_mode=preempt delay=500 \ burst_size=3 cpu_affinity=3 Link: https://lkml.kernel.org/r/1611797713-20965-1-git-send-email-chensong_2000@189.cn Signed-off-by: Song Chen <chensong_2000@189.cn> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
||
Colin Ian King
|
28cc65a173 |
tracing: Fix spelling mistake in Kconfig "infinit" -> "infinite"
There is a spelling mistake in the Kconfig help text. Fix it. Link: https://lkml.kernel.org/r/20201216114051.12056-1-colin.king@canonical.com Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
||
|
Masami Hiramatsu
|
7bb83f6fc4 |
tracing/kprobes: Do the notrace functions check without kprobes on ftrace
Enable the notrace function check on the architecture which doesn't
support kprobes on ftrace but support dynamic ftrace. This notrace
function check is not only for the kprobes on ftrace but also
sw-breakpoint based kprobes.
Thus there is no reason to limit this check for the arch which
supports kprobes on ftrace.
This also changes the dependency of Kconfig. Because kprobe event
uses the function tracer's address list for identifying notrace
function, if the CONFIG_DYNAMIC_FTRACE=n, it can not check whether
the target function is notrace or not.
Link: https://lkml.kernel.org/r/20210105065730.2634785-1-naveen.n.rao@linux.vnet.ibm.com
Link: https://lkml.kernel.org/r/161007957862.114704.4512260007555399463.stgit@devnote2
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Sami Tolvanen
|
3b15cdc159 |
tracing: move function tracer options to Kconfig
Move function tracer options to Kconfig to make it easier to add new methods for generating __mcount_loc, and to make the options available also when building kernel modules. Note that FTRACE_MCOUNT_USE_* options are updated on rebuild and therefore, work even if the .config was generated in a different environment. Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20201211184633.3213045-2-samitolvanen@google.com |
||
|
Linus Torvalds
|
09c0796adf |
Tracing updates for 5.11
The major update to this release is that there's a new arch config option called: CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS. Currently, only x86_64 enables it. All the ftrace callbacks now take a struct ftrace_regs instead of a struct pt_regs. If the architecture has HAVE_DYNAMIC_FTRACE_WITH_ARGS enabled, then the ftrace_regs will have enough information to read the arguments of the function being traced, as well as access to the stack pointer. This way, if a user (like live kernel patching) only cares about the arguments, then it can avoid using the heavier weight "regs" callback, that puts in enough information in the struct ftrace_regs to simulate a breakpoint exception (needed for kprobes). New config option that audits the timestamps of the ftrace ring buffer at most every event recorded. The "check_buffer()" calls will conflict with mainline, because I purposely added the check without including the fix that it caught, which is in mainline. Running a kernel built from the commit of the added check will trigger it. Ftrace recursion protection has been cleaned up to move the protection to the callback itself (this saves on an extra function call for those callbacks). Perf now handles its own RCU protection and does not depend on ftrace to do it for it (saving on that extra function call). New debug option to add "recursed_functions" file to tracefs that lists all the places that triggered the recursion protection of the function tracer. This will show where things need to be fixed as recursion slows down the function tracer. The eval enum mapping updates done at boot up are now offloaded to a work queue, as it caused a noticeable pause on slow embedded boards. Various clean ups and last minute fixes. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCX9uq8xQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qtrwAQCHevqWMjKc1Q76bnCgwB0AbFKB6vqy 5b6g/co5+ihv8wD/eJPWlZMAt97zTVW7bdp5qj/GTiCDbAsODMZ597LsxA0= =rZEz -----END PGP SIGNATURE----- Merge tag 'trace-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing updates from Steven Rostedt: "The major update to this release is that there's a new arch config option called CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS. Currently, only x86_64 enables it. All the ftrace callbacks now take a struct ftrace_regs instead of a struct pt_regs. If the architecture has HAVE_DYNAMIC_FTRACE_WITH_ARGS enabled, then the ftrace_regs will have enough information to read the arguments of the function being traced, as well as access to the stack pointer. This way, if a user (like live kernel patching) only cares about the arguments, then it can avoid using the heavier weight "regs" callback, that puts in enough information in the struct ftrace_regs to simulate a breakpoint exception (needed for kprobes). A new config option that audits the timestamps of the ftrace ring buffer at most every event recorded. Ftrace recursion protection has been cleaned up to move the protection to the callback itself (this saves on an extra function call for those callbacks). Perf now handles its own RCU protection and does not depend on ftrace to do it for it (saving on that extra function call). New debug option to add "recursed_functions" file to tracefs that lists all the places that triggered the recursion protection of the function tracer. This will show where things need to be fixed as recursion slows down the function tracer. The eval enum mapping updates done at boot up are now offloaded to a work queue, as it caused a noticeable pause on slow embedded boards. Various clean ups and last minute fixes" * tag 'trace-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (33 commits) tracing: Offload eval map updates to a work queue Revert: "ring-buffer: Remove HAVE_64BIT_ALIGNED_ACCESS" ring-buffer: Add rb_check_bpage in __rb_allocate_pages ring-buffer: Fix two typos in comments tracing: Drop unneeded assignment in ring_buffer_resize() tracing: Disable ftrace selftests when any tracer is running seq_buf: Avoid type mismatch for seq_buf_init ring-buffer: Fix a typo in function description ring-buffer: Remove obsolete rb_event_is_commit() ring-buffer: Add test to validate the time stamp deltas ftrace/documentation: Fix RST C code blocks tracing: Clean up after filter logic rewriting tracing: Remove the useless value assignment in test_create_synth_event() livepatch: Use the default ftrace_ops instead of REGS when ARGS is available ftrace/x86: Allow for arguments to be passed in to ftrace_regs by default ftrace: Have the callbacks receive a struct ftrace_regs instead of pt_regs MAINTAINERS: assign ./fs/tracefs to TRACING tracing: Fix some typos in comments ftrace: Remove unused varible 'ret' ring-buffer: Add recording of ring buffer recursion into recursed_functions ... |
||
|
Linus Torvalds
|
7a932e5702 |
asm-generic: cross-architecture timer cleanup
This cleans up two ancient timer features that were never completed in the past, CONFIG_GENERIC_CLOCKEVENTS and CONFIG_ARCH_USES_GETTIMEOFFSET. There was only one user left for the ARCH_USES_GETTIMEOFFSET variant of clocksource implementations, the ARM EBSA110 platform. Rather than changing to use modern timekeeping, we remove the platform entirely as Russell no longer uses his machine and nobody else seems to have one any more. The conditional code for using arch_gettimeoffset() is removed as a result. For CONFIG_GENERIC_CLOCKEVENTS, there are still a couple of platforms not using clockevent drivers: parisc, ia64, most of m68k, and one Arm platform. These all do timer ticks slighly differently, and this gets cleaned up to the point they at least all call the same helper function. Instead of most platforms using 'select GENERIC_CLOCKEVENTS' in Kconfig, the polarity is now reversed, with the few remaining ones selecting LEGACY_TIMER_TICK instead. Signed-off-by: Arnd Bergmann <arnd@arndb.de> -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl/Y1v8ACgkQmmx57+YA GNmCvQ/9EDlgCt92r8SB+LGafDtgB8TUQZeIrs9S2mByzdxwnw0lxObIXFCnhQgh RpG3dR+ONRDnC5eI149B377JOEFMZWe2+BtYHUHkFARtUEWatslQcz7yAGvVRK/l TS/qReb6piKltlzuanF1bMZbjy2OhlaDRcm+OlC3y5mALR33M4emb+rJ6cSdfk3K v1iZhrxtfQT77ztesh/oPkPiyQ6kNcz7SfpyYOb6f5VLlml2BZ7YwBSVyGY7urHk RL3XqOUP4KKlMEAI8w0E2nvft6Fk+luziBhrMYWK0GvbmI1OESENuX/c6tgT2OQ1 DRaVHvcPG/EAY8adOKxxVyHhEJDSoz5GJV/EtjlOegsJk6RomczR1uuiT3Kvm7Ah PktMKv4xQht1E15KPSKbOvNIEP18w2s5z6gw+jVDv8pw42pVEQManm1D+BICqrhl fcpw6T1drf9UxAjwX4+zXtmNs+a+mqiFG8puU4VVgT4GpQ8umHvunXz2WUjZO0jc 3m8ErJHBvtJwW5TOHGyXnjl9SkwPzHOfF6IcXTYWEDU4/gQIK9TwUvCjLc0lE27t FMCV2ds7/K1CXwRgpa5IrefSkb8yOXSbRZ56NqqF7Ekxw4J5bYRSaY7jb+qD/e+3 5O1y+iPxFrpH+16hSahvzrtcdFNbLQvBBuRtEQOYuHLt2UJrNoU= =QpNs -----END PGP SIGNATURE----- Merge tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic cross-architecture timer cleanup from Arnd Bergmann: "This cleans up two ancient timer features that were never completed in the past, CONFIG_GENERIC_CLOCKEVENTS and CONFIG_ARCH_USES_GETTIMEOFFSET. There was only one user left for the ARCH_USES_GETTIMEOFFSET variant of clocksource implementations, the ARM EBSA110 platform. Rather than changing to use modern timekeeping, we remove the platform entirely as Russell no longer uses his machine and nobody else seems to have one any more. The conditional code for using arch_gettimeoffset() is removed as a result. For CONFIG_GENERIC_CLOCKEVENTS, there are still a couple of platforms not using clockevent drivers: parisc, ia64, most of m68k, and one Arm platform. These all do timer ticks slighly differently, and this gets cleaned up to the point they at least all call the same helper function. Instead of most platforms using 'select GENERIC_CLOCKEVENTS' in Kconfig, the polarity is now reversed, with the few remaining ones selecting LEGACY_TIMER_TICK instead" * tag 'asm-generic-timers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: timekeeping: default GENERIC_CLOCKEVENTS to enabled timekeeping: remove xtime_update m68k: remove timer_interrupt() function m68k: change remaining timers to legacy_timer_tick m68k: m68328: use legacy_timer_tick() m68k: sun3/sun3c: use legacy_timer_tick m68k: split heartbeat out of timer function m68k: coldfire: use legacy_timer_tick() parisc: use legacy_timer_tick ARM: rpc: use legacy_timer_tick ia64: convert to legacy_timer_tick timekeeping: add CONFIG_LEGACY_TIMER_TICK timekeeping: remove arch_gettimeoffset net: remove am79c961a driver ARM: remove ebsa110 platform |
||
|
Steven Rostedt (VMware)
|
5b7be9c709 |
ring-buffer: Add test to validate the time stamp deltas
While debugging a situation where a delta for an event was calucalted wrong,
I realize there was nothing making sure that the delta of events are
correct. If a single event has an incorrect delta, then all events after it
will also have one. If the discrepency gets large enough, it could cause
the time stamps to go backwards when crossing sub buffers, that record a
full 64 bit time stamp, and the new deltas are added to that.
Add a way to validate the events at most events and when crossing a buffer
page. This will help make sure that the deltas are always correct. This test
will detect if they are ever corrupted.
The test adds a high overhead to the ring buffer recording, as it does the
audit for almost every event, and should only be used for testing the ring
buffer.
This will catch the bug that is fixed by commit
|
||
Naveen N. Rao
|
49a962c075 |
ftrace: Fix DYNAMIC_FTRACE_WITH_DIRECT_CALLS dependency
DYNAMIC_FTRACE_WITH_DIRECT_CALLS should depend on
DYNAMIC_FTRACE_WITH_REGS since we need ftrace_regs_caller().
Link: https://lkml.kernel.org/r/fc4b257ea8689a36f086d2389a9ed989496ca63a.1606412433.git.naveen.n.rao@linux.vnet.ibm.com
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Steven Rostedt (VMware)
|
02a474ca26 |
ftrace/x86: Allow for arguments to be passed in to ftrace_regs by default
Currently, the only way to get access to the registers of a function via a ftrace callback is to set the "FL_SAVE_REGS" bit in the ftrace_ops. But as this saves all regs as if a breakpoint were to trigger (for use with kprobes), it is expensive. The regs are already saved on the stack for the default ftrace callbacks, as that is required otherwise a function being traced will get the wrong arguments and possibly crash. And on x86, the arguments are already stored where they would be on a pt_regs structure to use that code for both the regs version of a callback, it makes sense to pass that information always to all functions. If an architecture does this (as x86_64 now does), it is to set HAVE_DYNAMIC_FTRACE_WITH_ARGS, and this will let the generic code that it could have access to arguments without having to set the flags. This also includes having the stack pointer being saved, which could be used for accessing arguments on the stack, as well as having the function graph tracer not require its own trampoline! Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
||
|
Steven Rostedt (VMware)
|
28575c61ea |
ring-buffer: Add recording of ring buffer recursion into recursed_functions
Add a new config RING_BUFFER_RECORD_RECURSION that will place functions that recurse from the ring buffer into the ftrace recused_functions file. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
||
|
Steven Rostedt (VMware)
|
773c167050 |
ftrace: Add recording of functions that caused recursion
This adds CONFIG_FTRACE_RECORD_RECURSION that will record to a file "recursed_functions" all the functions that caused recursion while a callback to the function tracer was running. Link: https://lkml.kernel.org/r/20201106023548.102375687@goodmis.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Guo Ren <guoren@kernel.org> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Helge Deller <deller@gmx.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: x86@kernel.org Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Anton Vorontsov <anton@enomsg.org> Cc: Colin Cross <ccross@android.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Petr Mladek <pmladek@suse.com> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: linux-doc@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-csky@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-s390@vger.kernel.org Cc: live-patching@vger.kernel.org Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
||
Arnd Bergmann
|
77f6c0b874 |
timekeeping: remove arch_gettimeoffset
With Arm EBSA110 gone, nothing uses it any more, so the corresponding code and the Kconfig option can be removed. Acked-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Linus Torvalds
|
d1e521adad |
Tracing updates for 5.8:
No new features this release. Mostly clean ups, restructuring and
documentation.
- Have ftrace_bug() show ftrace errors before the WARN, as the WARN will
reboot the box before the error messages are printed if panic_on_warn
is set.
- Have traceoff_on_warn disable tracing sooner (before prints)
- Write a message to the trace buffer that its being disabled when
disable_trace_on_warning() is set.
- Separate out synthetic events from histogram code to let it be used by
other parts of the kernel.
- More documentation on histogram design.
- Other small fixes and clean ups.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCXt+LEhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qj2zAP9sD/W4jafYayucj+MvRP7sy+Q0iAH7
WMn8fkk958cgfQD8D1QFtkkx+3O3TRT6ApGf11w5+JgSWUE2gSbW9H4fPQk=
=X5t4
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"No new features this release. Mostly clean ups, restructuring and
documentation.
- Have ftrace_bug() show ftrace errors before the WARN, as the WARN
will reboot the box before the error messages are printed if
panic_on_warn is set.
- Have traceoff_on_warn disable tracing sooner (before prints)
- Write a message to the trace buffer that its being disabled when
disable_trace_on_warning() is set.
- Separate out synthetic events from histogram code to let it be used
by other parts of the kernel.
- More documentation on histogram design.
- Other small fixes and clean ups"
* tag 'trace-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Remove obsolete PREEMPTIRQ_EVENTS kconfig option
tracing/doc: Fix ascii-art in histogram-design.rst
tracing: Add a trace print when traceoff_on_warning is triggered
ftrace,bug: Improve traceoff_on_warn
selftests/ftrace: Distinguish between hist and synthetic event checks
tracing: Move synthetic events to a separate file
tracing: Fix events.rst section numbering
tracing/doc: Fix typos in histogram-design.rst
tracing: Add hist_debug trace event files for histogram debugging
tracing: Add histogram-design document
tracing: Check state.disabled in synth event trace functions
tracing/probe: reverse arguments to list_add
tools/bootconfig: Add a summary of test cases and return error
ftrace: show debugging information when panic_on_warn set
|
||
Mel Gorman
|
388d8bdb87 |
tracing: Remove obsolete PREEMPTIRQ_EVENTS kconfig option
The PREEMPTIRQ_EVENTS option is unused after commit
|
||
Tom Zanussi
|
726721a518 |
tracing: Move synthetic events to a separate file
With the addition of the in-kernel synthetic event API, synthetic events are no longer specifically tied to the histogram triggers. The synthetic event code is also making trace_event_hist.c very bloated, so for those reasons, move it to a separate file, trace_events_synth.c, along with a new trace_synth.h header file. Because synthetic events are now independent from hist triggers, add a new CONFIG_SYNTH_EVENTS config option, and have CONFIG_HIST_TRIGGERS select it, and have CONFIG_SYNTH_EVENT_GEN_TEST depend on it. Link: http://lkml.kernel.org/r/4d1fa1f85ed5982706ac44844ac92451dcb04715.1590693308.git.zanussi@kernel.org Signed-off-by: Tom Zanussi <zanussi@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |
||
|
Tom Zanussi
|
2d19bd79ae |
tracing: Add hist_debug trace event files for histogram debugging
Add a new "hist_debug" file for each trace event, which when read will dump out a bunch of internal details about the hist triggers defined on that event. This is normally off but can be enabled by saying 'y' to the new CONFIG_HIST_TRIGGERS_DEBUG config option. This is in support of the new Documentation file describing histogram internals, Documentation/trace/histogram-design.rst, which was requested by developers trying to understand the internals when extending or making use of the hist triggers for higher-level tools. The histogram-design.rst documentation refers to the hist_debug files and demonstrates their use with output in the test examples. Link: http://lkml.kernel.org/r/77914c22b0ba493d9783c53bbfbc6087d6a7e1b1.1585941485.git.zanussi@kernel.org Signed-off-by: Tom Zanussi <zanussi@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> |