Initialize struct fb_ops to the correct default values with the
macro FB_DEFAULT_SBUS_OPS(). Rename the ioctl and mmap callbacks
to use the infix _sbusfb_. This makes them fit the SBUS helpers'
naming pattern. Also make the driver depend on FB_SBUS_HELPERS,
which selects the correct modules.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230806120926.5368-5-tzimmermann@suse.de
Add macros to initialize struct fb_ops for drivers that support
framebuffers on Sparc's SBUS. Also add a Kconfig token that selects
the necessary helpers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230806120926.5368-4-tzimmermann@suse.de
Avoid duplicate listings of sbuslib.o in the Makefile by building
it if CONFIG_FB_SBUS has been selected. Remove the object file from
the various drivers' build rules.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230806120926.5368-2-tzimmermann@suse.de
Insert parameterized test for the drm_fb_swab() to ensure correctness
and prevent future regressions.
Each expected color has it bytes reversed in order, so xrgb would be
bgrx.
Signed-off-by: Arthur Grillo <arthurgrillo@riseup.net>
Reviewed-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20230814-gsoc-drm-format-test-v2-v3-2-bd3e9f9bc2fb@riseup.net
When building with clang 18 I see the following warning:
| drivers/gpu/drm/tiny/repaper.c:952:11: warning: cast to smaller integer
| type 'enum repaper_model' from 'const void *' [-Wvoid-pointer-to-enum-cast]
| 952 | model = (enum repaper_model)match;
|
This is due to the fact that `match` is a void* while `enum repaper_model`
has the size of an int.
Add uintptr_t cast to silence clang warning while also keeping enum cast
for readability and consistency with other `model` assignment just a
few lines below:
| model = (enum repaper_model)spi_id->driver_data;
Link: https://github.com/ClangBuiltLinux/linux/issues/1910
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230816-void-drivers-gpu-drm-tiny-repaper-v1-1-9d8d10f0d52f@google.com
Currently, NO_PREFETCH is passed implicitly through
drm_nouveau_gem_pushbuf_push::length and drm_nouveau_exec_push::va_len.
Since this is a direct representation of how the HW is programmed it
isn't really future proof for a uAPI. Hence, fix this up for the new
uAPI and split up the va_len field of struct drm_nouveau_exec_push,
such that we keep 32bit for va_len and 32bit for flags.
For drm_nouveau_gem_pushbuf_push::length at least provide
NOUVEAU_GEM_PUSHBUF_NO_PREFETCH to indicate the bit shift.
While at it, fix up nv50_dma_push() as well, such that the caller
doesn't need to encode the NO_PREFETCH flag into the length parameter.
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230823181746.3446-1-dakr@redhat.com
If a sched job depends on a dma-fence from a job from the same GPU
scheduler instance, but a different scheduler entity, the GPU scheduler
does only wait for the particular job to be scheduled, rather than for
the job to fully complete. This is due to the GPU scheduler assuming
that there is a scheduler instance per ring. However, the current
implementation, in order to avoid arbitrary amounts of kthreads, has a
single scheduler instance while scheduler entities represent rings.
As a workaround, set the DRM_SCHED_FENCE_DONT_PIPELINE for all
out-fences in order to force the scheduler to wait for full job
completion for dependent jobs from different entities and same scheduler
instance.
There is some work in progress [1] to address the issues of firmware
schedulers; once it is in-tree the scheduler topology in Nouveau should
be re-worked accordingly.
[1] https://lore.kernel.org/dri-devel/20230801205103.627779-1-matthew.brost@intel.com/
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Faith Ekstrand <faith.ekstrand@collaboralcom>
Link: https://patchwork.freedesktop.org/patch/msgid/20230811010632.2473-1-dakr@redhat.com
Since there's a lot of confusion around this, document both the rules
and the best practices around negotiating, allocating, importing, and
using buffers when crossing context/process/device/subsystem boundaries.
This ties up all of dma-buf, formats and modifiers, and their usage.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20230803154908.105124-4-daniels@collabora.com
Use the dev_err_probe() helper to simplify error handling during probe.
This also handle scenario, when EDEFER is returned and useless error is printed.
Fixes error:
panel-jdi-lt070me05000 4700000.dsi.0: cannot get enable-gpio -517
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230812185239.378582-1-david@ixit.cz
Add the device link when panel bridge is attached and delete the link
when panel bridge is detached. The drm device is the consumer while
the panel device is the supplier. This makes sure that the drm device
suspends eariler and resumes later than the panel device, hence resolves
problems where the order is reversed, like the problematic case mentioned
in the below link.
Link: https://lore.kernel.org/lkml/CAPDyKFr0XjrU_udKoUKQ_q8RWaUkyqL+8fV-7s1CTMqi7u3-Rg@mail.gmail.com/T/
Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230807061115.3244501-1-victor.liu@nxp.com
It's possible for users to try to duplicate the CRTC state even when the
state doesn't exist. drm_atomic_helper_crtc_duplicate_state() (and other
users of __drm_atomic_helper_crtc_duplicate_state()) already guard this
with a WARN_ON() instead of crashing, so let's do that here too.
Fixes: 604be85547 ("drm/rockchip: Add VOP2 driver")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230621223311.2239547-5-jonas@kwiboo.se
Allocation of crtc_state may fail in vop_crtc_reset, causing an invalid
pointer to be passed to __drm_atomic_helper_crtc_reset.
Fix this by adding a NULL check of crtc_state, similar to other drivers.
Fixes: 01e2eaf40c ("drm/rockchip: Convert to using __drm_atomic_helper_crtc_reset() for reset.")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230621223311.2239547-4-jonas@kwiboo.se
vop_plane_destroy and vop_crtc_destroy are plain wrappers around
drm_plane_cleanup and drm_crtc_cleanup. Use them directly as plane and
crtc funcs to closer match VOP2 driver.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230621223311.2239547-3-jonas@kwiboo.se
struct rockchip_crtc_state members such as output_type, output_bpc and
enable_afbc is always reset to zero in the atomic_duplicate_state crtc
funcs.
Fix this by using kmemdup on the subclass rockchip_crtc_state struct.
Fixes: 4e257d9eee ("drm/rockchip: get rid of rockchip_drm_crtc_mode_config")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230621223311.2239547-2-jonas@kwiboo.se
There are two problems in lsdc_pixel_pll_setup()
1. If kzalloc() fails then call iounmap() to release the resources.
2. Both kzalloc and ioremap does not return error pointers on failure, so
using IS_ERR_OR_NULL() checks is a bit confusing and not very right,
fix this by changing those to NULL checks instead.
Fixes: f39db26c54 ("drm: Add kms driver for loongson display controller")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Link: https://patchwork.freedesktop.org/patch/msgid/20230720123950.543082-1-harshit.m.mogalapalli@oracle.com
atomic_get_input_bus_fmts is only implemented for LVDS decoders, resulting
that LVDS encoders only support bus format MEDIA_BUS_FMT_FIXED. This
results in warnings like:
mxsfb 21c8000.lcdif: Bridge does not provide bus format, assuming
MEDIA_BUS_FMT_RGB888_1X24.
Please fix bridge driver by handling atomic_get_input_bus_fmts.
Fix this by reusing lvds_codec_atomic_get_input_bus_fmts currently used
for LVDS decoders. Use RGB888_1X24 for LVDS encoders. This also allows
removing the dedicated struct drm_bridge_funcs for decoders.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230810063229.597533-1-alexander.stein@ew.tq-group.com
Samsung DSIM used in older Exynos SoCs (like Exynos 4210, 4x12, 3250)
doesn't report empty level of packer header FIFO. In case of those SoCs,
use the old way of waiting for empty command tranfsfer FIFO, removed
recently by commit 14806c6415 ("drm: bridge: samsung-dsim: Drain command transfer FIFO before transfer").
Fixes: 14806c6415 ("drm: bridge: samsung-dsim: Drain command transfer FIFO before transfer")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230809145641.3213210-1-m.szyprowski@samsung.com
Three DRM bridge drivers select GENERIC_PHY_MIPI_DPHY when GENERIC_PHY
might not be set. This causes Kconfig warnings and a build error.
WARNING: unmet direct dependencies detected for GENERIC_PHY_MIPI_DPHY
Depends on [n]: GENERIC_PHY [=n]
Selected by [y]:
- DRM_NWL_MIPI_DSI [=y] && DRM_BRIDGE [=y] && DRM [=y] && COMMON_CLK [=y] && OF [=y] && HAS_IOMEM [=y]
- DRM_SAMSUNG_DSIM [=y] && DRM [=y] && DRM_BRIDGE [=y] && COMMON_CLK [=y] && OF [=y] && HAS_IOMEM [=y]
(drm/bridge/cadence/Kconfig was found by inspection.)
aarch64-linux-ld: drivers/gpu/drm/bridge/samsung-dsim.o: in function `samsung_dsim_set_phy_ctrl':
drivers/gpu/drm/bridge/samsung-dsim.c:731: undefined reference to `phy_mipi_dphy_get_default_config_for_hsclk'
Prevent these warnings and build error by also selecting GENERIC_PHY
whenever selecting GENERIC_PHY_MIPI_DPHY.
Fixes: fced5a364d ("drm/bridge: cdns: Convert to phy framework")
Fixes: 44cfc62334 ("drm/bridge: Add NWL MIPI DSI host controller support")
Fixes: 171b3b1e0f ("drm: bridge: samsung-dsim: Select GENERIC_PHY_MIPI_DPHY")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Aleksandr Nogikh <nogikh@google.com>
Link: lore.kernel.org/r/20230803144227.2187749-1-nogikh@google.com
Cc: Adam Ford <aford173@gmail.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Robert Chiras <robert.chiras@nxp.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: Robert Foss <rfoss@kernel.org>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Adam Ford <aford173@gmail.com>
Tested-by: Aleksandr Nogikh <nogikh@google.com>
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804030140.21395-1-rdunlap@infradead.org
The ULPS EXIT is initialized to 0xaf in downstream BSP as well as older
revisions of this patchset, in newer revisions of the DSIM patchset it
was left out and set to 0. Fix it.
Fixes: 4d562c70c4 ("drm: bridge: samsung-dsim: Add i.MX8M Mini/Nano support")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230709134827.449185-1-marex@denx.de
I think there are limit checks in place for most things but the
new uAPI wants to not have them.
Add a limit check and use the vmemdup_user helper instead.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230810185020.231135-1-airlied@gmail.com
The VOP on Rockchip's RV1126 SoC is different from other SoC's
VOP implementations, so add a separate compatible for it.
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230731110012.2913742-6-jagan@edgeble.ai
drm_exec_prepare_obj() and drm_exec_prepare_array() both reserve
dma-fence slots and hence a dma_resv_list without ever freeing it.
Make sure to call drm_gem_private_object_fini() for each GEM object
passed to drm_exec_prepare_obj()/drm_exec_prepare_array() throughout the
test to fix this up.
While at it, remove some trailing empty lines.
Fixes: 9710631cc8 ("drm: add drm_exec selftests v4")
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230809225034.8803-1-dakr@redhat.com
Signed-off-by: Christian König <christian.koenig@amd.com>
On the SoC host controller, the pixel clock can be:
* standard: data is launched on the rising edge
* inverted: data is launched on the falling edge
Some panels may need the inverted option to be used so let's support
this DRM flag.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230609144843.851327-1-miquel.raynal@bootlin.com
Panfrost IRQ handler may stuck for a long time, for example this happens
when there is a bad HDMI connection and HDMI handler takes a long time to
finish processing, holding Panfrost. Make Panfrost's job timeout handler
to sync IRQ before checking fence signal status in order to prevent
spurious job timeouts due to a slow IRQ processing.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> # MediaTek MT8192 and MT8195 Chromebooks
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230807000444.14926-1-dmitry.osipenko@collabora.com
Not really a common use case, but let's make sure that we don't
accidentially break that somehow.
CC: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230731123625.3766-2-christian.koenig@amd.com
