Devices offering SMBus block process calls are rare, so add it to the
testunit. This is also a good test case for testing proper
I2C_M_RECV_LEN flag handling of I2C bus masters emulating SMBus.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
There is no need to do irqsave and irqrestore in context of hard IRQ.
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
- add a new compatible string to the AT24 DT bindings
-----BEGIN PGP SIGNATURE-----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=tyTK
-----END PGP SIGNATURE-----
Merge tag 'at24-updates-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into i2c/for-5.12
at24: updates for v5.12
- add a new compatible string to the AT24 DT bindings
Document the compatible value for the ROHM Semiconductor BR24G01 I2C bus
EEPROM.
While at it, sort the entries alphabetically.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Add PCI ID of SMBus controller on Intel Alder Lake PCH-P.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
In commit e5c02cf541 ("i2c: mv64xxx: Add runtime PM support"), error
pointers to optional clocks were replaced by NULL to simplify the resume
callback implementation. However, that commit missed that the IS_ERR
check in mv64xxx_of_config should be replaced with a NULL check. As a
result, the check always passes, even for an invalid device tree.
Fixes: e5c02cf541 ("i2c: mv64xxx: Add runtime PM support")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add notification to inform caller that mux objects array has been
created. It allows to user, invoked platform device registration for
"i2c-mux-mlxcpld" driver, to be notified that mux infrastructure is
available, and thus some devices could be connected to this
infrastructure.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Allow to extend mux number supported by driver.
Currently it is limited by eight, which is not enough for new coming
Mellanox modular system with line cards, which require up to 64 mux
support.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Extend driver to allow I2C routing control through CPLD devices with
word address space. Till now only CPLD devices with byte address space
have been supported.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Do not set the argument 'force_nr' of i2c_mux_add_adapter() routine,
instead provide argument 'chan_id'.
Rename mux ids array from 'adap_ids' to 'chan_ids'.
The motivation is to prepare infrastructure to be able to:
- Create only the child adapters which are actually needed - for which
channel ids are specified.
- To assign 'nrs' to these child adapters dynamically, with no 'nr'
enforcement.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Allow to program register value zero to the mux register, which is
required for word address mux register space support.
Change key selector type from 'unsigned short' to 'integer' in order to
allow to set it to -1 on deselection.
Rename key selector field from 'last_chan' to 'last_val', since this
fields keeps actually selector value and not channel number.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Convert driver from 'i2c' to 'platform'.
The motivation is to avoid I2C addressing conflict between
‘i2c-mux-cpld’ driver, providing mux selection and deselection through
CPLD ‘mux control’ register, and CPLD host driver. The CPLD is I2C
device and is multi-functional device performing logic for different
components, like LED, ‘hwmon’, interrupt control, watchdog etcetera.
For such configuration CPLD should be host I2C device, connected to the
relevant I2C bus with the relevant I2C address and all others component
drivers are supposed to be its children.
The hierarchy in such case will be like in the below example:
ls /sys/bus/i2c/devices/44-0032
i2c-mux-mlxcpld.44 leds-mlxreg.44 mlxreg-io.44
ls /sys/bus/i2c/devices/44-0032/i2c-mux-mlxcpld.44
channel-0, …, channel-X
Currently this driver is not activated by any kernel driver,
so this conversion doesn’t affect any user.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Only the Layerscape SoCs have interrupts on bus idle, which facilitate
sending events which complete slave bus transactions.
Add support for synthesizing missing events. If we see a master request,
or a newly addressed slave request, if the last event sent to the backend
was I2C_SLAVE_READ_REQUESTED, send the backend a I2C_SLAVE_READ_PROCESSED
followed by I2C_SLAVE_STOP. For all other events, send an I2C_SLAVE_STOP.
Signed-off-by: Kevin Paul Herbert <kph@platinasystems.com>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
If the hardware is still accessing memory after SMMU translation
is disabled (as part of smmu shutdown callback), then the
IOVAs (I/O virtual address) which it was using will go on the bus
as the physical addresses which will result in unknown crashes
like NoC/interconnect errors.
So, implement shutdown callback to i2c driver to stop on-going transfer
and unmap DMA mappings during system "reboot" or "shutdown".
Fixes: 37692de5d5 ("i2c: i2c-qcom-geni: Add bus driver for the Qualcomm GENI I2C controller")
Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org>
Reviewed-by: Akash Asthana <akashast@codeaurora.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
To save power, gate the clock when the bus is inactive, during system
sleep, and during shutdown. On some platforms, specifically Allwinner
A13/A20, gating the clock implicitly resets the module as well. Since
the module already needs to be reset after some suspend/resume cycles,
it is simple enough to reset it during every runtime suspend/resume.
Because the bus may be used by wakeup source IRQ threads, it needs to
be functional as soon as IRQs are enabled. Thus, its system PM hooks
need to run in the noirq phase.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Tested-by: Ondrej Jirman <megous@megous.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Use pci_{info,warn,err,dbg} functions of the kernel's PCI API.
Remove unnecessary ndev_pdev(), ndev_name() and ndev_dev() macros.
While at it, remove useless __func__ from logging.
Signed-off-by: Richard Neumann <mail@richard-neumann.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Move out header file from include/linux/platform_data/x86/ to
include/linux/platform_data/, since it does not depend on x86
architecture.
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Reviewed-by: Michael Shych <michaelsh@nvidia.com>
Acked-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
This may be just taste, but I think 'nmsgs' is way more readable than a
generic 'num' variable. Also, fix spaces around operators while here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Don't use 'i' to carry data, make a specific variable for it. After the
move to memcpy recently, we can even remove 'i'.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Switch to use threaded interrupt context in order to avoid checking of
"are we in interrupt?" for the code that may sleep in the IRQ handler.
I2C doesn't require a very low interrupt-handling latency, hence this
change doesn't introduce any noticeable effects.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The zte zx platform is getting removed, so this driver is no
longer needed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Add the obvious compatible name to the existing I2C binding, and pair
it with the existing A31 fallback compatible string, as the devices
are compatible.
On the way use enums to group all compatible devices together.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Vbhq
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.11-2021-01-24' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"Still need a final cancelation fix that isn't quite done done,
expected in the next day or two. That said, this contains:
- Wakeup fix for IOPOLL requests
- SQPOLL split close op handling fix
- Ensure that any use of io_uring fd itself is marked as inflight
- Short non-regular file read fix (Pavel)
- Fix up bad false positive warning (Pavel)
- SQPOLL fixes (Pavel)
- In-flight removal fix (Pavel)"
* tag 'io_uring-5.11-2021-01-24' of git://git.kernel.dk/linux-block:
io_uring: account io_uring internal files as REQ_F_INFLIGHT
io_uring: fix sleeping under spin in __io_clean_op
io_uring: fix short read retries for non-reg files
io_uring: fix SQPOLL IORING_OP_CLOSE cancelation state
io_uring: fix skipping disabling sqo on exec
io_uring: fix uring_flush in exit_files() warning
io_uring: fix false positive sqo warning on flush
io_uring: iopoll requests should also wake task ->in_idle state
-----BEGIN PGP SIGNATURE-----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=Bblh
-----END PGP SIGNATURE-----
Merge tag 'block-5.11-2021-01-24' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- NVMe pull request from Christoph:
- fix a status code in nvmet (Chaitanya Kulkarni)
- avoid double completions in nvme-rdma/nvme-tcp (Chao Leng)
- fix the CMB support to cope with NVMe 1.4 controllers (Klaus Jensen)
- fix PRINFO handling in the passthrough ioctl (Revanth Rajashekar)
- fix a double DMA unmap in nvme-pci
- lightnvm error path leak fix (Pan)
- MD pull request from Song:
- Flush request fix (Xiao)
* tag 'block-5.11-2021-01-24' of git://git.kernel.dk/linux-block:
lightnvm: fix memory leak when submit fails
nvme-pci: fix error unwind in nvme_map_data
nvme-pci: refactor nvme_unmap_data
md: Set prev_flush_start and flush_bio in an atomic way
nvmet: set right status on error in id-ns handler
nvme-pci: allow use of cmb on v1.4 controllers
nvme-tcp: avoid request double completion for concurrent nvme_tcp_timeout
nvme-rdma: avoid request double completion for concurrent nvme_rdma_timeout
nvme: check the PRINFO bit before deciding the host buffer length
Merge misc fixes from Andrew Morton:
"18 patches.
Subsystems affected by this patch series: mm (pagealloc, memcg, kasan,
memory-failure, and highmem), ubsan, proc, and MAINTAINERS"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
MAINTAINERS: add a couple more files to the Clang/LLVM section
proc_sysctl: fix oops caused by incorrect command parameters
powerpc/mm/highmem: use __set_pte_at() for kmap_local()
mips/mm/highmem: use set_pte() for kmap_local()
mm/highmem: prepare for overriding set_pte_at()
sparc/mm/highmem: flush cache and TLB
mm: fix page reference leak in soft_offline_page()
ubsan: disable unsigned-overflow check for i386
kasan, mm: fix resetting page_alloc tags for HW_TAGS
kasan, mm: fix conflicts with init_on_alloc/free
kasan: fix HW_TAGS boot parameters
kasan: fix incorrect arguments passing in kasan_add_zero_shadow
kasan: fix unaligned address is unhandled in kasan_remove_zero_shadow
mm: fix numa stats for thp migration
mm: memcg: fix memcg file_dirty numa stat
mm: memcg/slab: optimize objcg stock draining
mm: fix initialization of struct page for holes in memory layout
x86/setup: don't remove E820_TYPE_RAM for pfn 0
Here are some small char/misc driver fixes for 5.11-rc5. Included in
here are:
- habanalabs driver fixes
- phy driver fixes
- hwtracing driver fixes
- rtsx cardreader driver fix
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYA1pIg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymE5wCgxuKbOIbjP9XpqxyXof8lbswcjGIAnily3dSR
9hcJL4b7LNSRB1qPBma7
=OnfB
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc driver fixes for 5.11-rc5:
- habanalabs driver fixes
- phy driver fixes
- hwtracing driver fixes
- rtsx cardreader driver fix
All of these have been in linux-next with no reported issues"
* tag 'char-misc-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
misc: rtsx: init value of aspm_enabled
habanalabs: disable FW events on device removal
habanalabs: fix backward compatibility of idle check
habanalabs: zero pci counters packet before submit to FW
intel_th: pci: Add Alder Lake-P support
stm class: Fix module init return on allocation failure
habanalabs: prevent soft lockup during unmap
habanalabs: fix reset process in case of failures
habanalabs: fix dma_addr passed to dma_mmap_coherent
phy: mediatek: allow compile-testing the dsi phy
phy: cpcap-usb: Fix warning for missing regulator_disable
PHY: Ingenic: fix unconditional build of phy-ingenic-usb
Here are some small driver core fixes for 5.11-rc5 that resolve some
reported problems:
- revert of a -rc1 patch that was causing problems with some
machines
- device link device name collision problem fix (busses only
have to name devices unique to their bus, not unique to all
busses)
- kernfs splice bugfixes to resolve firmware loading problems
for Qualcomm systems.
- other tiny driver core fixes for minor issues reported.
All of these have been in linux-next with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYA1qGw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymd2ACgzVEpWJddtLNz+9guU9kAIIPcNboAn2GreCle
vgNkgCapi2ZjYtWBk8Cl
=YNIw
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are some small driver core fixes for 5.11-rc5 that resolve some
reported problems:
- revert of a -rc1 patch that was causing problems with some machines
- device link device name collision problem fix (busses only have to
name devices unique to their bus, not unique to all busses)
- kernfs splice bugfixes to resolve firmware loading problems for
Qualcomm systems.
- other tiny driver core fixes for minor issues reported.
All of these have been in linux-next with no reported problems"
* tag 'driver-core-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: Fix device link device name collision
driver core: Extend device_is_dependent()
kernfs: wire up ->splice_read and ->splice_write
kernfs: implement ->write_iter
kernfs: implement ->read_iter
Revert "driver core: Reorder devices on successful probe"
Driver core: platform: Add extra error check in devm_platform_get_irqs_affinity()
drivers core: Free dma_range_map when driver probe failed
Here are some IIO driver fixes for 5.11-rc5 to resolve some reported
problems.
Nothing major, just a few small fixes, all of these have been in
linux-next for a while and full details are in the shortlog.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYA1r9A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn0RgCdHY0/1aR/33/5T6Z9ruiP/gSWS2QAoJ33+Su7
bHnFj/tQLqjUg2u9+Ybs
=40Xz
-----END PGP SIGNATURE-----
Merge tag 'staging-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/IIO driver fixes from Greg KH:
"Here are some IIO driver fixes for 5.11-rc5 to resolve some reported
problems.
Nothing major, just a few small fixes, all of these have been in
linux-next for a while and full details are in the shortlog"
* tag 'staging-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: sx9310: Fix semtech,avg-pos-strength setting when > 16
iio: common: st_sensors: fix possible infinite loop in st_sensors_irq_thread
iio: ad5504: Fix setting power-down state
counter:ti-eqep: remove floor
drivers: iio: temperature: Add delay after the addressed reset command in mlx90632.c
iio: adc: ti_am335x_adc: remove omitted iio_kfifo_free()
dt-bindings: iio: accel: bma255: Fix bmc150/bmi055 compatible
iio: sx9310: Off by one in sx9310_read_thresh()
Here are 3 small tty/serial fixes for 5.11-rc5 to resolve reported
problems:
- 2 patches from you to fix up writing to ttys with splice
- mvebu-uart driver fix for reported problem.
All of these have been in linux-next with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYA1tkQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym9nwCZAfiPNV9eSh0A92RMAYfl9gjndGAAn1P/LWTb
PkmO1htDe/IDadsvPUWq
=1vln
-----END PGP SIGNATURE-----
Merge tag 'tty-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are three small tty/serial fixes for 5.11-rc5 to resolve reported
problems:
- two patches to fix up writing to ttys with splice
- mvebu-uart driver fix for reported problem
All of these have been in linux-next with no reported problems"
* tag 'tty-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: fix up hung_up_tty_write() conversion
tty: implement write_iter
serial: mvebu-uart: fix tx lost characters at power off
Here are some small USB driver fixes for 5.11-rc5. They resolve:
- xhci issues for some reported problems
- ehci driver issue for one specific device
- USB gadget fixes for some reported problems
- cdns3 driver fixes for issues reported
- MAINTAINERS file update
- thunderbolt minor fix
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYA1uOw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymsywCcCyyPu1chkE2nSBFmcB5zXn2obSoAoL8zTIVM
zVlQEjG/9IzSGdQY/Dt5
=VVM1
-----END PGP SIGNATURE-----
Merge tag 'usb-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes for 5.11-rc5. They resolve:
- xhci issues for some reported problems
- ehci driver issue for one specific device
- USB gadget fixes for some reported problems
- cdns3 driver fixes for issues reported
- MAINTAINERS file update
- thunderbolt minor fix
All of these have been in linux-next with no reported issues"
* tag 'usb-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: bdc: Make bdc pci driver depend on BROKEN
xhci: tegra: Delay for disabling LFPS detector
xhci: make sure TRB is fully written before giving it to the controller
usb: udc: core: Use lock when write to soft_connect
USB: gadget: dummy-hcd: Fix errors in port-reset handling
usb: gadget: aspeed: fix stop dma register setting.
USB: ehci: fix an interrupt calltrace error
ehci: fix EHCI host controller initialization sequence
MAINTAINERS: update Peter Chen's email address
thunderbolt: Drop duplicated 0x prefix from format string
MAINTAINERS: Update address for Cadence USB3 driver
usb: cdns3: imx: improve driver .remove API
usb: cdns3: imx: fix can't create core device the second time issue
usb: cdns3: imx: fix writing read-only memory issue
The K: entry should ensure that Nick and I always get CC'd on patches that
touch these files but it is better to be explicit rather than implicit.
Link: https://lkml.kernel.org/r/20210114004059.2129921-1-natechancellor@gmail.com
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The process_sysctl_arg() does not check whether val is empty before
invoking strlen(val). If the command line parameter () is incorrectly
configured and val is empty, oops is triggered.
For example:
"hung_task_panic=1" is incorrectly written as "hung_task_panic", oops is
triggered. The call stack is as follows:
Kernel command line: .... hung_task_panic
......
Call trace:
__pi_strlen+0x10/0x98
parse_args+0x278/0x344
do_sysctl_args+0x8c/0xfc
kernel_init+0x5c/0xf4
ret_from_fork+0x10/0x30
To fix it, check whether "val" is empty when "phram" is a sysctl field.
Error codes are returned in the failure branch, and error logs are
generated by parse_args().
Link: https://lkml.kernel.org/r/20210118133029.28580-1-nixiaoming@huawei.com
Fixes: 3db978d480 ("kernel/sysctl: support setting sysctl parameters from kernel command line")
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: <stable@vger.kernel.org> [5.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The original PowerPC highmem mapping function used __set_pte_at() to
denote that the mapping is per CPU. This got lost with the conversion
to the generic implementation.
Override the default map function.
Link: https://lkml.kernel.org/r/20210112170411.281464308@linutronix.de
Fixes: 47da42b27a ("powerpc/mm/highmem: Switch to generic kmap atomic")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
set_pte_at() on MIPS invokes update_cache() which might recurse into
kmap_local().
Use set_pte() like the original MIPS highmem implementation did.
Link: https://lkml.kernel.org/r/20210112170411.187513575@linutronix.de
Fixes: a4c33e83bc ("mips/mm/highmem: Switch to generic kmap atomic")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Paul Cercueil <paul@crapouillou.net>
Reported-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The generic kmap_local() map function uses set_pte_at(), but MIPS requires
set_pte() and PowerPC wants __set_pte_at().
Provide arch_kmap_local_set_pte() and default it to set_pte_at().
Link: https://lkml.kernel.org/r/20210112170411.056306194@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm/highmem: Fix fallout from generic kmap_local
conversions".
The kmap_local conversion wreckaged sparc, mips and powerpc as it missed
some of the details in the original implementation.
This patch (of 4):
The recent conversion to the generic kmap_local infrastructure failed to
assign the proper pre/post map/unmap flush operations for sparc.
Sparc requires cache flush before map/unmap and tlb flush afterwards.
Link: https://lkml.kernel.org/r/20210112170136.078559026@linutronix.de
Link: https://lkml.kernel.org/r/20210112170410.905976187@linutronix.de
Fixes: 3293efa978 ("sparc/mm/highmem: Switch to generic kmap atomic")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: Andreas Larsson <andreas@gaisler.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The conversion to move pfn_to_online_page() internal to
soft_offline_page() missed that the get_user_pages() reference taken by
the madvise() path needs to be dropped when pfn_to_online_page() fails.
Note the direct sysfs-path to soft_offline_page() does not perform a
get_user_pages() lookup.
When soft_offline_page() is handed a pfn_valid() && !pfn_to_online_page()
pfn the kernel hangs at dax-device shutdown due to a leaked reference.
Link: https://lkml.kernel.org/r/161058501210.1840162.8108917599181157327.stgit@dwillia2-desk3.amr.corp.intel.com
Fixes: feec24a613 ("mm, soft-offline: convert parameter to pfn")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Qian Cai <cai@lca.pw>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Building ubsan kernels even for compile-testing introduced these
warnings in my randconfig environment:
crypto/blake2b_generic.c:98:13: error: stack frame size of 9636 bytes in function 'blake2b_compress' [-Werror,-Wframe-larger-than=]
static void blake2b_compress(struct blake2b_state *S,
crypto/sha512_generic.c:151:13: error: stack frame size of 1292 bytes in function 'sha512_generic_block_fn' [-Werror,-Wframe-larger-than=]
static void sha512_generic_block_fn(struct sha512_state *sst, u8 const *src,
lib/crypto/curve25519-fiat32.c:312:22: error: stack frame size of 2180 bytes in function 'fe_mul_impl' [-Werror,-Wframe-larger-than=]
static noinline void fe_mul_impl(u32 out[10], const u32 in1[10], const u32 in2[10])
lib/crypto/curve25519-fiat32.c:444:22: error: stack frame size of 1588 bytes in function 'fe_sqr_impl' [-Werror,-Wframe-larger-than=]
static noinline void fe_sqr_impl(u32 out[10], const u32 in1[10])
Further testing showed that this is caused by
-fsanitize=unsigned-integer-overflow, but is isolated to the 32-bit x86
architecture.
The one in blake2b immediately overflows the 8KB stack area
architectures, so better ensure this never happens by disabling the
option for 32-bit x86.
Link: https://lkml.kernel.org/r/20210112202922.2454435-1-arnd@kernel.org
Link: https://lore.kernel.org/lkml/20201230154749.746641-1-arnd@kernel.org/
Fixes: d0a3ac549f ("ubsan: enable for all*config builds")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Marco Elver <elver@google.com>
Cc: George Popescu <georgepope@android.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A previous commit added resetting KASAN page tags to
kernel_init_free_pages() to avoid false-positives due to accesses to
metadata with the hardware tag-based mode.
That commit did reset page tags before the metadata access, but didn't
restore them after. As the result, KASAN fails to detect bad accesses
to page_alloc allocations on some configurations.
Fix this by recovering the tag after the metadata access.
Link: https://lkml.kernel.org/r/02b5bcd692e912c27d484030f666b350ad7e4ae4.1611074450.git.andreyknvl@google.com
Fixes: aa1ef4d7b3 ("kasan, mm: reset tags when accessing metadata")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A few places where SLUB accesses object's data or metadata were missed
in a previous patch. This leads to false positives with hardware
tag-based KASAN when bulk allocations are used with init_on_alloc/free.
Fix the false-positives by resetting pointer tags during these accesses.
(The kasan_reset_tag call is removed from slab_alloc_node, as it's added
into maybe_wipe_obj_freeptr.)
Link: https://linux-review.googlesource.com/id/I50dd32838a666e173fe06c3c5c766f2c36aae901
Link: https://lkml.kernel.org/r/093428b5d2ca8b507f4a79f92f9929b35f7fada7.1610731872.git.andreyknvl@google.com
Fixes: aa1ef4d7b3 ("kasan, mm: reset tags when accessing metadata")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The initially proposed KASAN command line parameters are redundant.
This change drops the complex "kasan.mode=off/prod/full" parameter and
adds a simpler kill switch "kasan=off/on" instead. The new parameter
together with the already existing ones provides a cleaner way to
express the same set of features.
The full set of parameters with this change:
kasan=off/on - whether KASAN is enabled
kasan.fault=report/panic - whether to only print a report or also panic
kasan.stacktrace=off/on - whether to collect alloc/free stack traces
Default values:
kasan=on
kasan.fault=report
kasan.stacktrace=on (if CONFIG_DEBUG_KERNEL=y)
kasan.stacktrace=off (otherwise)
Link: https://linux-review.googlesource.com/id/Ib3694ed90b1e8ccac6cf77dfd301847af4aba7b8
Link: https://lkml.kernel.org/r/4e9c4a4bdcadc168317deb2419144582a9be6e61.1610736745.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kasan_remove_zero_shadow() shall use original virtual address, start and
size, instead of shadow address.
Link: https://lkml.kernel.org/r/20210103063847.5963-1-lecopzer@gmail.com
Fixes: 0207df4fa1 ("kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN")
Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
During testing kasan_populate_early_shadow and kasan_remove_zero_shadow,
if the shadow start and end address in kasan_remove_zero_shadow() is not
aligned to PMD_SIZE, the remain unaligned PTE won't be removed.
In the test case for kasan_remove_zero_shadow():
shadow_start: 0xffffffb802000000, shadow end: 0xffffffbfbe000000
3-level page table:
PUD_SIZE: 0x40000000 PMD_SIZE: 0x200000 PAGE_SIZE: 4K
0xffffffbf80000000 ~ 0xffffffbfbdf80000 will not be removed because in
kasan_remove_pud_table(), kasan_pmd_table(*pud) is true but the next
address is 0xffffffbfbdf80000 which is not aligned to PUD_SIZE.
In the correct condition, this should fallback to the next level
kasan_remove_pmd_table() but the condition flow always continue to skip
the unaligned part.
Fix by correcting the condition when next and addr are neither aligned.
Link: https://lkml.kernel.org/r/20210103135621.83129-1-lecopzer@gmail.com
Fixes: 0207df4fa1 ("kernel/memremap, kasan: make ZONE_DEVICE with work with KASAN")
Signed-off-by: Lecopzer Chen <lecopzer.chen@mediatek.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: YJ Chiang <yj.chiang@mediatek.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Fix to not lose IPIs on bcm2836.
- Fix for a bogus marking of ITS devices as shared due to unitialized
stack variable.
- Clear a phantom interrupt on qcom-pdc to unblock suspend.
- Small cleanups, warning and build fixes.
-----BEGIN PGP SIGNATURE-----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=Z32e
-----END PGP SIGNATURE-----
Merge tag 'irq_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Fix a kernel panic in mips-cpu due to invalid irq domain hierarchy.
- Fix to not lose IPIs on bcm2836.
- Fix for a bogus marking of ITS devices as shared due to unitialized
stack variable.
- Clear a phantom interrupt on qcom-pdc to unblock suspend.
- Small cleanups, warning and build fixes.
* tag 'irq_urgent_for_v5.11_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Export irq_check_status_bit()
irqchip/mips-cpu: Set IPI domain parent chip
irqchip/pruss: Simplify the TI_PRUSS_INTC Kconfig
irqchip/loongson-liointc: Fix build warnings
driver core: platform: Add extra error check in devm_platform_get_irqs_affinity()
irqchip/bcm2836: Fix IPI acknowledgement after conversion to handle_percpu_devid_irq
irqchip/irq-sl28cpld: Convert comma to semicolon
genirq/msi: Initialize msi_alloc_info before calling msi_domain_prepare_irqs()
