Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
This device exposes a headset codec on link0 and an amplifier on
link3. This is a very unusual pin-muxing, usually the microphones are
pin-muxed with link2/link3. This resulted in a problematic error
handling leading to a kernel oops, and invalidated a hard-coded
assumption.
Full support for this device requires a DMI quirk shared separately
("soundwire: dmi-quirks: add remapping for HP Omen 16-k0005TX").
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
Address the warning: "Codec: dpcm_be_connect: FE is nonatomic but BE is
not, forcing BE as nonatomic" by marking BE DAI as nonatomic. Aligns
with what is already done for FE DAIs.
This patchset iterates the change over all HSW and BDW related machine
board drivers.
Since the recent change in CS35L41 codec requires the reference of
acpi_dev handle, the current Kconfig may lead to a build breakage.
Revert the Kconfig change and re-introduce the hard dependency on
CONFIG_ACPI again as a temporary workaround.
Fixes: eef3759602 ("ALSA: hda: cs35l41: Support reading subsystem id from ACPI")
Link: https://lore.kernel.org/r/20220715182427.18891-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Stefan Binding <sbinding@opensource.cirrus.com>:
CS35L41 has a DSP which is able to run firmware, as well as a tuning file.
Different systems may want to use different firmwares and tuning files, and
some firmwares/tunings may not be compatible with other systems.
To allow a system to select the correct fimware/tuning, we can read an _SUB
from the ACPI. This _SUB can then be used to uniquely identify the system
in the firmware/tuning file name.
Add a helper function which reads the _SUB, so this can be used by other
parts in the future.
Add support inside the CS35L41 ASoC driver to read this _SUB, and save it
appropriately.
When PCH-attached DMICs are used on a SoundWire-based platform, all
known devices pin-mux SoundWire link2 and link3 with DMIC, and only
use link0 and link1 for SoundWire.
The HP Omen16 is the first exception to the rule, with SoundWire using
link0 and link3. Rather than using a fixed mask, let's count the
number of SoundWire links used.
BugLink: https://github.com/thesofproject/sof/issues/5966
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220715144144.274770-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
While tinkering with ACPI work-arounds for the HP Omen 16 support, we
identified a corner case where the headset codec device properties are
not set in the codec .init when -EPROBE_DEFER is returned, but
released unconditionally in the .exit().
This leads to a kernel oops
[ 4.186891] sof_sdw sof_sdw: snd_soc_register_card failed -517
[ 4.186896] BUG: kernel NULL pointer dereference, address: 00000000000003f0
[ 4.186914] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 4.186926] RIP: 0010:dev_fwnode+0x5/0x20
[ 4.186974] device_remove_software_node+0x10/0x80
[ 4.186982] sof_sdw_rt711_exit+0x19/0x30 [snd_soc_sof_sdw]
[ 4.186990] mc_dailink_exit_loop+0x94/0xc0 [snd_soc_sof_sdw]
[ 4.186996] ? rt711_rtd_init+0x170/0x170 [snd_soc_sof_sdw]
A similar error case can occur if the addition of the device property
fails. We need to test if the property was successfully added before
removing it.
BugLink: https://github.com/thesofproject/linux/issues/3727
Fixes: 768ad6d80d ("ASoC: Intel: sof_sdw: handle errors on card registration")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220715144144.274770-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When codec is unbound but not yet removed, in the eyes of
snd_hdac_bus_process_unsol_events() it is still a valid target to
delegate work to. Such behaviour may lead to use-after-free errors.
Address by verifying if codec is actually registered.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220706120230.427296-6-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
By default, the driver will automatically load DSP firmware
for the amps, if available. Adding this option allows the
autoload to be optional, which allows for different configurations.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220630002335.366545-15-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is required to support CS35L41 calibration.
By default, speaker protection firmware will be loaded, if
available. However, different firmware is required to run
the calibration sequence, so it is necessary to add support
to be able to unload, switch and reload firmware.
This patch adds 2 ALSA Controls for each amp:
"DSP1 Firmware Load"
"DSP1 Firmware Type"
"DSP1 Firmware Load" can be used to unload and
load the firmware.
"DSP1 Firmware Type" can be used to switch the
target firmware to be loaded by "DSP1 Firmware Load"
Since loading firmware can add new ALSA controls, it is
necessary to ensure the firmware loading is run asynchronously
from the ALSA control itself to prevent deadlocks.
Note: When switching between firmwares, an ALSA control is
only added if it has not previously existed. If it had existed
previously, it will be re-enabled instead.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220630002335.366545-14-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The config sequences for running with and without firmware and DSP
are different. The original behavior assumed that we would only
run without DSP only in the case where firmware load failed.
This meant the non-firmware sequence was written with the assumtion
that various registers would be set to their default value.
However, to support the ability to unload the firmware, the
non-firmware register sequence must be updated to update all
required registers, including values that would be defaulted,
in case the firmware sequence, which could have already run,
has changed their value.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220630002335.366545-13-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Speaker Calibration data, specific to an individual speaker is
stored inside UEFI variables during calibration, and can be
used by the DSP.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220630002335.366545-11-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
CS35L41 supports hibernation during suspend when using
DSP firmware.
When the driver suspends it will hibernate the part, if
firmware is running, and resume will wake from hibernation.
CS35L41 driver will suspend/resume when requested by
hda driver.
Note that suspend/resume and hibernation is only supported
when firmware is running.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220630002335.366545-10-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a big release thus far and there will probably be more changes
to come, it's a combination of a larger than usual crop of new drivers
and some subsysetm wide cleanups from Charles rather than anything
structural. The SOF and Intel DSP code both also continue to be very
actively developed.
- Restructing of the set_fmt() callbacks to be specified in terms of
the device rather than with semantics depending on if the device is
supposed to be a CODEC or SoC, making things clearer in situations
like CODEC to CODEC links.
- Clean up of the way we flag which DAI naming scheme we use to reflect
the progress that's been made modernising things.
- Merge of more of the Intel AVS driver stack, including some board
integrations.
- New version 4 mechanism for communication with SOF DSPs.
- Suppoort for dynamically selecting the PLL to use at runtime on i.MX
platforms.
- Improvements for CODEC to CODEC support in the generic cards.
- Support for AMD Jadeite and various machines, Intel MetorLake DSPs,
Mediatek MT8186 DSPs and MT6366, nVidia Tegra MDDRC, OPE and PEQ, NXP
TFA9890, Qualcomm SDM845, WCD9335 and WAS883x, and Texas Instruments
TAS2780.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmLRa6sACgkQJNaLcl1U
h9Bkvwf9HJRDLQ513AIAg8QJVZ4a+vAX4dirPUkpsyxRJ9WUdaOVdYiRIwDfMKQl
Y9gH8xN3/JcLThKDuCxbyndgXEbfhu+s55VerrJ1/KAlnxZoYXcCuc+PKr78ZNCq
goMQT3EcKiJXPEXcxZVMGMsK0XaoWNycKHm/wQ+27OF8kiFs58iRvnFk27HLgd6z
ucVF7Zmj+vABIS2eou+pAvAT2Ln9OraCdwjH26nSSZ3J8z4SIvsaJXJ5Fsasevpa
ExL+RIBXTG4Xs5MH60P0P6qNV3zIuiRkLTN2BZabr7R3OHE8eW4Vz6p2QQ70eZ9R
UdusEjJONjfHwoF9jD+QIk/zv9T/BA==
=oiKM
-----END PGP SIGNATURE-----
Merge tag 'asoc-v5.20' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v5.20
This is a big release thus far and there will probably be more changes
to come, it's a combination of a larger than usual crop of new drivers
and some subsysetm wide cleanups from Charles rather than anything
structural. The SOF and Intel DSP code both also continue to be very
actively developed.
- Restructing of the set_fmt() callbacks to be specified in terms of
the device rather than with semantics depending on if the device is
supposed to be a CODEC or SoC, making things clearer in situations
like CODEC to CODEC links.
- Clean up of the way we flag which DAI naming scheme we use to reflect
the progress that's been made modernising things.
- Merge of more of the Intel AVS driver stack, including some board
integrations.
- New version 4 mechanism for communication with SOF DSPs.
- Suppoort for dynamically selecting the PLL to use at runtime on i.MX
platforms.
- Improvements for CODEC to CODEC support in the generic cards.
- Support for AMD Jadeite and various machines, Intel MetorLake DSPs,
Mediatek MT8186 DSPs and MT6366, nVidia Tegra MDDRC, OPE and PEQ, NXP
TFA9890, Qualcomm SDM845, WCD9335 and WAS883x, and Texas Instruments
TAS2780.
Address the warning: "Codec: dpcm_be_connect: FE is nonatomic but BE is
not, forcing BE as nonatomic" by marking BE DAI as nonatomic. Aligns
with what is already done for FE ones.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220624134317.3656128-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Address the warning: "Codec: dpcm_be_connect: FE is nonatomic but BE is
not, forcing BE as nonatomic" by marking BE DAI as nonatomic. Aligns
with what is already done for FE ones.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220624134317.3656128-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Address the warning: "Codec: dpcm_be_connect: FE is nonatomic but BE is
not, forcing BE as nonatomic" by marking BE DAI as nonatomic. Aligns
with what is already done for FE DAIs.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220624134317.3656128-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Address the warning: "Codec: dpcm_be_connect: FE is nonatomic but BE is
not, forcing BE as nonatomic" by marking BE DAI as nonatomic. Aligns
with what is already done for FE DAIs.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220624134317.3656128-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When loading firmware, wm_adsp uses a number of parameters to
determine the path of the firmware and tuning files to load.
One of these parameters is system_name.
Add support in cs35l41 to read this system name from the ACPI
_SUB ID in order to uniquely identify the firmware and tuning
mapped to a particular system.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220707151037.3901050-3-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As covered in the second revert commit in this pull request the version
of the BCLK muxing that's in v5.19 is causing issues, let's just revert
it and wait for the more complete support in v5.20 instead.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmLQWZAACgkQJNaLcl1U
h9CBrgf+L93aQcJMwmeZqxYscG45p9i0uXUKY0QMc+HExGYG1hzizQrau1GWQaGC
9eO11zjETkGH9/4MagYiEnwgkFhaTXV7hFQwVi7WCZMP8Aii6Akxa69IZVcAyPOp
Ulu9j3TDhVc5MiS3Xc5VLsyXyzMmo2Mx1SzXV+321uqrSpFnl80bZbckA7D/bkCx
LJTXuYq3+s0/V/Re+iY6b3ZdsBgNMauyDCtPnJIbgJj+UU8edp4TqgSUZGioKEzJ
xNQnz7h1NpyLWu/LGLomHfUueCKAZBN2BUry/x0w/lmjsPCrPwdwQxWvli4fw2TM
/SUnAGFsU7EMssVuls1PzYhhESM0AA==
=Jl4c
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.19-rc4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Drop Rockchip BCLK management for v5.19
As covered in the second revert commit in this pull request the version
of the BCLK muxing that's in v5.19 is causing issues, let's just revert
it and wait for the more complete support in v5.20 instead.
When the driver fails in snd_card_register() at probe time, it will free
the 'bcd2k->midi_out_urb' before killing it, which may cause a UAF bug.
The following log can reveal it:
[ 50.727020] BUG: KASAN: use-after-free in bcd2000_input_complete+0x1f1/0x2e0 [snd_bcd2000]
[ 50.727623] Read of size 8 at addr ffff88810fab0e88 by task swapper/4/0
[ 50.729530] Call Trace:
[ 50.732899] bcd2000_input_complete+0x1f1/0x2e0 [snd_bcd2000]
Fix this by adding usb_kill_urb() before usb_free_urb().
Fixes: b47a22290d ("ALSA: MIDI driver for Behringer BCD2000 USB device")
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220715010515.2087925-1-zheyuma97@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Before, ssiu.c didn't care SSI5-8, thus,
commit b1384d4c95 ("ASoC: rsnd: care default case on
rsnd_ssiu_busif_err_status_clear()") cares it for status clear.
But we should care it for error irq handling, too.
This patch cares it.
Reported-by: Nguyen Bao Nguyen <nguyen.nguyen.yj@renesas.com>
Reported-by: Nishiyama Kunihiko <kunihiko.nishiyama.dn@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/871quocio1.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are two bugs that have to do with when we copy the payload:
size = simple_write_to_buffer(ipc4_msg->data_ptr,
priv->max_msg_size, ppos, buffer,
count);
The value of "*ppos" was supposed to be zero but it is
sizeof(ipc4_msg->header_u64) so it will copy the data into the middle of
the "ipc4_msg->data_ptr" buffer instead of to the start. The second
problem is "buffer" should be "buffer + sizeof(ipc4_msg->header_u64)".
This function is used for fuzz testing so the data is normally random
and this bug likely does not affect anyone very much.
In this context, it's simpler and more appropriate to use copy_from_user()
instead of simple_write_to_buffer() so I have re-written the function.
Fixes: 066c67624d ("ASoC: SOF: ipc-msg-injector: Add support for IPC4 messages")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/Ysg1tB2FKLnRMsel@kili
Signed-off-by: Mark Brown <broonie@kernel.org>
The version of the BCLK pinctrl management changes that made it into
v5.19 has caused problems on some systems due to overly strict DT
requirements but attempts to fix it have caused further breakage on
other platforms. Just drop the changes for this release, we already
have a better version queued for -next.
Fixes: 26b9f2fa7b ("ASoC: rockchip: i2s: Fix NULL pointer dereference when pinctrl is not found")
Fixes: a5450aba73 ("ASoC: rockchip: i2s: switch BCLK to GPIO")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220713130451.31481-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Some Laptops use a number of gpios to define which vendor is
used for a particular laptop.
Different coefficient files are used for different vendors.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220630002335.366545-9-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
To be able to support different firmwares and tuning
for different models, the driver needs to be able to
load a different firmware and coefficient file based
on its Subsystem ID.
The driver attempts to load the firmware in the
following order:
/lib/firmware/cirrus/cs35l41-dsp1-<fw-type>-<ssid>-dev<#>.wmfw
/lib/firmware/cirrus/cs35l41-dsp1-<fw-type>-<ssid>.wmfw
/lib/firmware/cirrus/cs35l41-dsp1-<fw-type>.wmfw
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220630002335.366545-8-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On some laptop models, the ACPI contains the unique
Subsystem ID, and this value should be preferred
over the value from the HDA driver.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220630002335.366545-7-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Subsystem ID is read from the HDA driver, and will
be used by the CS35L41 driver to be able to uniquely
identify the laptop, which is required to be able to
define firmware to be used by specific models.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220630002335.366545-6-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch adds support for the CS35L41 DSP.
The DSP allows for extra features, such as running
speaker protection algorithms and hibernations.
To utilize these features, the driver must load
firmware into the DSP, as well as various tuning
files which allow for customization for specific
models.
[ Slightly simplified Kconfig changes by tiwai ]
Signed-off-by: Vitaly Rodionov <vitaly.rodionov@cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220630002335.366545-5-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
DSP controls are exposed as ALSA controls, however,
some of these controls are required to be accessed by
the driver. Add apis which allow read/write of these
controls. The write api will also notify the ALSA control
on value change.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220630002335.366545-3-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The cs35l41 part contains a DSP which is able to run firmware.
The cs_dsp library can be used to control the DSP.
These controls can be exposed to userspace using ALSA controls.
This library adds apis to be able to interface between
cs_dsp and hda drivers and expose the relevant controls as
ALSA controls.
[ Note: the dependency of CONFIG_SND_HDA_CS_DSP_CONTROLS Kconfig is
corrected. Also, this Kconfig isn't enabled now but will be
actually enabled in a later patch -- tiwai ]
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Signed-off-by: Vitaly Rodionov <vitalyr@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220630002335.366545-2-vitalyr@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use atomic_try_cmpxchg instead of atomic_cmpxchg (*ptr, old, new) == old in
ep_state_update. x86 CMPXCHG instruction returns success in ZF flag,
so this change saves a compare after cmpxchg (and related move instruction
in front of cmpxchg).
No functional change intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Link: https://lore.kernel.org/r/20220713151946.4743-1-ubizjak@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For IPC4, we need to set pipeline state in BE DAI trigger.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220708061312.25878-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In mt6359_parse_dt() and mt6359_accdet_parse_dt(), we should call
of_node_put() for the reference returned by of_get_child_by_name()
which has increased the refcount.
Fixes: 6835302853 ("ASoC: mt6359: fix failed to parse DT properties")
Fixes: eef07b9e09 ("ASoC: mediatek: mt6359: add MT6359 accdet jack driver")
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220713102013.367336-1-windhl@126.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since SND_SOC_ES8316 has a hard dependency on I2C and since 'select'
does not follow any dependency chains, SND_SOC_AMD_ST_ES8336_MACH
also needs to have a hard dependency on I2C.
Fixes a kconfig warning and subsequent build errors:
WARNING: unmet direct dependencies detected for SND_SOC_ES8316
Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && I2C [=n]
Selected by [y]:
- SND_SOC_AMD_ST_ES8336_MACH [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_SOC_AMD_ACP [=y] && ACPI [=y] && (I2C [=n] || COMPILE_TEST [=y])
sound/soc/codecs/es8316.c:866:1: warning: data definition has no type or storage class
866 | module_i2c_driver(es8316_i2c_driver);
sound/soc/codecs/es8316.c:866:1: error: type defaults to ‘int’ in declaration of ‘module_i2c_driver’ [-Werror=implicit-int]
sound/soc/codecs/es8316.c:866:1: warning: parameter names (without types) in function declaration
sound/soc/codecs/es8316.c:857:26: warning: ‘es8316_i2c_driver’ defined but not used [-Wunused-variable]
857 | static struct i2c_driver es8316_i2c_driver = {
Fixes: f94fa84058 ("ASoC: amd: enable machine driver build for Jadeite platform")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: alsa-devel@alsa-project.org
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Link: https://lore.kernel.org/r/20220712183348.31046-1-rdunlap@infradead.org
Signed-off-by: Mark Brown <broonie@kernel.org>
We should call of_node_put() for the reference before its replacement
as it returned by of_get_parent() which has increased the refcount.
Besides, we should also call of_node_put() before return.
Fixes: c8c74939f7 ("ASoC: audio-graph-card2: add Multi CPU/Codec support")
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20220713071200.366729-1-windhl@126.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The "gpio_pa" pointer is an error pointer, there is no need to try
put it. Calling gpiod_put() on it will lead to an error pointer
dereference.
Fixes: 02527c3f23 ("ASoC: amd: add Machine driver for Jadeite platform")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/Ys2IRPHWGIwuVs21@kili
Signed-off-by: Mark Brown <broonie@kernel.org>
Each kernel doc comment expects the definition of the return value in
a proper format. This patch adds or fixes the missing entries for the
remaining ALSA core API functions.
Link: https://lore.kernel.org/r/20220713104759.4365-8-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Each kernel doc comment expects the definition of the return value in
a proper format. This patch adds or fixes the missing entries for
memory allocation helpers.
Link: https://lore.kernel.org/r/20220713104759.4365-7-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Each kernel doc comment expects the definition of the return value in
proper format. This patch adds or fixes the missing entries for
control API.
Link: https://lore.kernel.org/r/20220713104759.4365-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Each kernel doc comment expects the definition of the return value and
the summary for each struct / enum in a proper format. This patch
adds or fixes the missing entries for compress-offload API.
Link: https://lore.kernel.org/r/20220713104759.4365-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Each kernel doc comment expects the definition of the return value in
a proper format. This patch adds or fixes the missing entries for PCM
dmaengine API.
Link: https://lore.kernel.org/r/20220713104759.4365-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Each kernel doc comment expects the definition of the return value in
a proper format. This patch adds or fixes the missing entries for PCM
API.
Link: https://lore.kernel.org/r/20220713104759.4365-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The headset on this machine is not defined, after applying the quirk
ALC256_FIXUP_ASUS_HEADSET_MIC, the headset-mic works well
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220713094133.9894-1-tangmeng@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On a HP 288 Pro G2 MT (X9W02AV), the front mic could not be detected.
In order to get it working, the pin configuration needs to be set
correctly, and the ALC221_FIXUP_HP_288PRO_MIC_NO_PRESENCE fixup needs
to be applied.
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220713063332.30095-1-tangmeng@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The HP ProBook 440/450 G9 and EliteBook 640/650 G9 have multiple
motherboard design and they are using different subsystem ID of audio
codec. Add the same quirk for other MBs.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220713022706.22892-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Selections can be propagated via selections, while dependencies are not.
Hence, consolidate selections under the SND_HDA_SCODEC_CS35L41 option.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220712153519.35692-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ACPI_PTR() is more harmful than helpful. For example, in this case
if CONFIG_ACPI=n, the ID table left unused which is not what we want.
Instead of adding ifdeffery or attribute here and there, drop ACPI_PTR().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220712153519.35692-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The FSR (Firmware State Register) holds the ROM state information, it does not
contain error information.
The FSR itself is a bit more complicated as well as the state depends on the
module currently in use.
The error code from ROM or the status code from the firmware is located at the
next register.
Fix the handling of the FSR in order to provide usable and human readable (in
most cases) report on the status and error.
Merge series from Daniel Baluta <daniel.baluta@oss.nxp.com>
Daniel Baluta <daniel.baluta@nxp.com>:
From: Daniel Baluta <daniel.baluta@nxp.com>
We need a way to send extra parameters to DSP firmware. In order to do
this, we introduce ext_data array at the end of ipc_stream_params.
With this new addition we can send compress parameters.
This requires SOF ABI bump.
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
By mistake a developer managed to create a 'corrupted' IPC4 firmware image which
loaded fine to the DSP and after boot it sent an IPC reply before we would have
received the FW_READY message.
It turned out that the image was an IPC3 firmware and the IPC reply was the IPC3
FW_READY notification message which got understood as an IPC4 reply message due
to the difference between the two IPC mechanism.
This caused a NULL pointer dereference since the reply memory will be allocated
after the FW_READY message.
To make sure this will not bite again, skip any spurious reply messages before
the FW_READY.
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
There is no need to decouple a decoupled stream twice.
Keep the decoupling in hda_link_stream_assign() only as it is going to be
executed in all cases.
Drop the outdated comment from hda_link_dma_hw_params() as well since the code
has changed around it.
We have sanity checks for byte controls and if any of the fail the locally
allocated scontrol->ipc_control_data is freed up, but not set to NULL.
On a rollback path of the error the higher level code will also try to free
the scontrol->ipc_control_data which will eventually going to lead to
memory corruption as double freeing memory is not a good thing.
Fixes: b5cee8feb1 ("ASoC: SOF: topology: Make control parsing IPC agnostic")
Reported-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220712130103.31514-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The current implementation of probes only supports IPC3 and should not be
loaded for other IPC implementation.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220712131022.1124-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
In case of a firmware crash we force the DSP to be powered down and rebooted.
To make sure that the next boot is going to be clean, force the boot process to
skip the IMR booting and re-download the firmware.
After introducing extended parameters we need to forbid older firmware
versions to run with the current and future kernel versions.
Although in theory the communication protocol will still work the
semantics at application level are undefined. So, prevent this by
disallowing older firmwares to run with newer kernels.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220712141531.14599-4-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Allocate memory at the end of sof_ipc_stream_params to store
snd_compr_params in order to be sent them to SOF firmware.
This will help firmware correctly configure codecs parameters.
Notice, that we use 2 bytes from the reserved pool in order to store
the extended data length. This is compatible with older FWs where
there was no extended data.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220712141531.14599-3-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We need to extend sof_ipc_pcm_parmas with additional data in order
to send compress_params to SOF FW.
The extensions will be done at runtime so we need to dynamically
allocate pcm object of type struct sof_ipc_pcm_params.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220712141531.14599-2-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Call snd_hdac_ext_stream_decouple_locked() unconditionally in
hda_link_stream_assign(), the snd_hdac_ext_stream_decouple_locked() have
internal checks to avoid re-configuring.
There is no need to call snd_hdac_ext_stream_decouple() via
hda_link_dma_params() as the stream must have been set to decoupled when
it got assigned (even if it used local condition to call
snd_hdac_ext_stream_decouple_locked()).
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220712131620.13365-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The comment in hda_link_dma_hw_params() is no longer valid as the dma_data
is set to NULL at system suspend as well.
Instead of rewording the comment to state the obvious: try to take the
hext_stream from the dma_data and if it is not set then assign a new one
and store it as dma_data.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220712131620.13365-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The FSR (Firmware State Register) can be found at offset 0 in the SRAM and
it is holding information about the state of the ROM/FW.
In case of a boot failure it can be used to get the state where the boot
process got stuck, it does not itself contains error codes as such.
The error code (or the firmware state information) is stored in the next
soft register at offset 0x4.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220712125734.30512-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
'ret' is never used. Remove it and return 0 instead.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220712123902.14696-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When an FE, typically non-atomic, is connected to an atomic BE, we
force the BE as non-atomic. There's no reason to throw a warning, this
is a perfectly fine configuration and a conversion that's required
by-design.
This removes the unconditional warnings such as
[ 12.054213] iDisp1: dpcm_be_connect: FE is nonatomic but BE is not, forcing BE as nonatomic
[ 12.074693] iDisp2: dpcm_be_connect: FE is nonatomic but BE is not, forcing BE as nonatomic
[ 12.096612] iDisp3: dpcm_be_connect: FE is nonatomic but BE is not, forcing BE as nonatomic
[ 12.118637] iDisp4: dpcm_be_connect: FE is nonatomic but BE is not, forcing BE as nonatomic
[ 12.140660] dmic01: dpcm_be_connect: FE is nonatomic but BE is not, forcing BE as nonatomic
[ 12.147521] dmic16k: dpcm_be_connect: FE is nonatomic but BE is not, forcing BE as nonatomic
and demotes them to dev_dbg(), as suggested in review comments.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220708200641.26923-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use a dedicated flag instead of directly checking the
sdev->system_suspend_target to decide if we need to skip IMR boot due to
too deep sleep state where the memory used for IMR booting will not retain
its content.
The skip_imr_boot flag will be set true during suspend if the target state
is deeper than S3 and reset back to false on successful boot to re-enable
IMR booting in shallower sleep states.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220712120936.28072-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is not yet clear, but it is possible to create a firmware so broken
that it will send a reply message before a FW_READY message (it is not
yet clear if FW_READY will arrive later).
Since the reply_data is allocated only after the FW_READY message, this
will lead to a NULL pointer dereference if not filtered out.
Reported-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220712122357.31282-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is not yet clear, but it is possible to create a firmware so broken
that it will send a reply message before a FW_READY message (it is not
yet clear if FW_READY will arrive later).
Since the reply_data is allocated only after the FW_READY message, this
will lead to a NULL pointer dereference if not filtered out.
The issue was reported with IPC4 firmware but the same condition is present
for IPC3.
Reported-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220712122357.31282-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is not yet clear, but it is possible to create a firmware so broken
that it will send a reply message before a FW_READY message (it is not
yet clear if FW_READY will arrive later).
Since the reply_data is allocated only after the FW_READY message, this
will lead to a NULL pointer dereference if not filtered out.
The issue was reported with IPC4 firmware but the same condition is present
for IPC3.
Reported-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220712122357.31282-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On a HP 288 Pro G6, the front mic could not be detected.In order to
get it working, the pin configuration needs to be set correctly, and
the ALC671_FIXUP_HP_HEADSET_MIC2 fixup needs to be applied.
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220712092222.21738-1-tangmeng@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The comments are inconsistent and point to the wrong driver name.
The initially named i2c-multi-instantiate it was renamed to the
serial-multi-instantiate exactly due to support of the platforms
with multiple CS35L41 codecs.
Fix comments accordingly.
While at it, drop file names from the files.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220711100129.37326-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Another Dell model, another fixup entry: Latitude E5430 needs the same
fixup as other Latitude E series as workaround for noise problems.
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220712060005.20176-1-tangmeng@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
Series consists of loosely connected patches and does not concentrate on
one specific subject.
First, as generic HDAudio codec driver is now part of ASoC, avs-driver
core is updated to register missing ext_bus operations. This completes
driver's core implementation.
The next change adds the last missing piece for port descriptions coming
from topology in formatted string format e.g.: ssp%d have full
effect. To do that, the port value needs to be provided to respective
copier configuration.
Third change relaxes core transition timings so that scenarios where
modules are interfering with each other while being on separate cores
are not occasionally causing trouble.
All other changes are addressing warnings, cleaning things up a little
and protecting driver from invalid firmware behavior - while not
expected in release binaries, does not hurt to add them.
This patch adds the function of headphone button detection,
Button detection will be enabled if the device tree
has a key_enable property.
Signed-off-by: Seven Lee <wtli@nuvoton.com>
Link: https://lore.kernel.org/r/20220627032959.3442064-1-wtli@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>:
Our tests platforms do use realtek codecs, while implementing avs driver
and machine boards for it, we identified some problems with those codec
drivers.
This series aims to fix those issues.
Merge series from V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>:
Add Generic driver to support multiple platform,
ADD HS control instance for Rembrandt platform.
Add nau8825,max98560 and rt5682s,rt1019 combination support for legacy
platform.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Two patches to improve error and memory handling. When IPC4 is used,
some of the flows were incorrect.
We should only have an error when enforcing strict mapping between
kernel and firmware versions. In all other cases, there is no reason
to throw a warning.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20220708200719.26961-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is another HP ProDesk 600 G3 model with the PCI SSID 103c:82b4
that requires the quirk HP_MIC_NO_PRESENCE. Add the corresponding
entry to the quirk table.
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220711101744.25189-1-tangmeng@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The issue on Acer SWIFT SF313-51 is that headset microphone
doesn't work. The following quirk fixed headset microphone issue.
Note that the fixup of SF314-54/55 (ALC256_FIXUP_ACER_HEADSET_MIC)
was not successful on my SF313-51.
Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220711081527.6254-1-tangmeng@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Make sure that component is set to proper value, otherwise we may
dereference freed component in interrupt.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220707125701.3518263-6-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make sure that component is set to proper value, otherwise we may
dereference freed component in interrupt.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220707125701.3518263-5-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make sure that component is set to proper value, otherwise we may
dereference freed component in interrupt.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220707125701.3518263-4-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On our RVP platforms using rt298 with combojack we've seen issues with
controls being in incorrect state after suspend/resume cycle. This is
caused by codec driver not setting pins to correct state and causing
codec suspend method to not be called. Which on resume caused codec
registers to be in undefined state. Fix this by setting pins correctly
in jack detect function.
Above problem is caused by the fact that when jack == NULL code doesn't
reach rt298_jack_detect() function which sets pins. Alternatively
problem could be fixed by just moving rt298_jack_detect, but as rt298
codec is similar to rt286, align the code by setting pins explicitly.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220707125701.3518263-3-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Set rt298->jack to passed value in mic_detect, otherwise when jack is
set to NULL on next interrupt call, we may use freed pointer.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220707125701.3518263-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit a5450aba73 ("ASoC: rockchip: i2s: switch BCLK to GPIO") switched
BCLK to GPIO functions when probing the i2s bus interface, but missed
adding a check for when devm_pinctrl_get() returns an error. This can lead
to the following NULL pointer dereference on a rockpro64-v2 if there are no
"pinctrl" properties in the i2s device tree node.
Check that i2s->pinctrl is valid before attempting to search for the
bclk_on and bclk_off pinctrl states.
Fixes: a5450aba73 ("ASoC: rockchip: i2s: switch BCLK to GPIO")
Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/r/20220711130522.401551-1-alexandru.elisei@arm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Avoid build errors when CONFIG_COMMON_CLK is not set/enabled.
ERROR: modpost: "__clk_get_name" [sound/soc/fsl/snd-soc-fsl-utils.ko] undefined!
Fixes: 7bad812554 ("ASoC: fsl_utils: Add function to handle PLL clock source")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1657507190-14546-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove condition with no effect
Signed-off-by: Zhongjun Tan <tanzhongjun@coolpad.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220708024651.42999-1-hbut_tan@163.com
Signed-off-by: Mark Brown <broonie@kernel.org>
1. Revise hifixdsp shutdown flow to pull runstall high then reset high.
2. Add 1 us delay between D/BRESET high and low for 10 DSP cycles(26M)
based on IP vendor's suggestion.
Signed-off-by: YC Hung <yc.hung@mediatek.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Li-Yu Yu <afg984@gmail.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: KuanHsun Cheng <Allen-KH.Cheng@mediatek.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220708203904.29214-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is not used anywhere in the file, so there is no need to keep it.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220706120230.427296-9-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Old code resets SIE for up to 8 streams using byte accessor, but
register is laid out in following way:
31 GIE
30 CIE
29:x Reserved
x-1:0 SIE
If there is more than 8 streams, some of them may and up with enabled
interrupts. To fix this just clear whole INTCTL register when disabling
interrupts.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220706120230.427296-8-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If early probe of HDAudio bus driver fails e.g.: due to missing
firmware file, snd_hda_codec_shutdown() ends in manipulating
uninitialized codec->pcm_list_head causing page fault.
Iinitialization of HDAudio codec in ASoC is split in two:
- snd_hda_codec_device_init()
- snd_hda_codec_device_new()
snd_hda_codec_device_init() is called during probe_codecs() by HDAudio
bus driver while snd_hda_codec_device_new() is called by
codec-component's ->probe(). The second call will not happen until all
components required by related sound card are present within the ASoC
framework. With firmware failing to load during the PCI's deferred
initialization i.e.: probe_work(), no platform components are ever
registered. HDAudio codec enumeration is done at that point though, so
the codec components became registered to ASoC framework, calling
snd_hda_codec_device_init() in the process.
Now, during platform reboot snd_hda_codec_shutdown() is called for every
codec found on the HDAudio bus causing oops if any of them has not
completed both of their initialization steps. Relocating field
initialization fixes the issue.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220706120230.427296-7-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
AVS HDAudio bus driver does not tie with codec drivers tighly. Codec
device and its respective driver cleanup procedures are split and may
not occur one after the other. Device cleanup is performed only on
snd_hdac_ext_bus_device_remove() i.e. it's the bus driver's
responsibility. If codec component probing fails, put_device() found in
snd_hda_codec_device_new() may lead to page fault. Relocate it to
snd_hda_codec_new() to address the problem on ASoC side while keeping
status quo for snd_hda_intel.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220706120230.427296-5-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
AVS HDAudio bus driver does not tie with codec drivers tighly and
snd_hda_codec_device_new() can be called after codec's module reload. In
such case, rpm is forbidden and invoking pm_runtime_forbid()
unconditionally causes device's usage_count to become unbalanced. This
is later caught by WARN_ON() found in sound/soc/hda.c. Detect such
circumstance and bump the usage_count instead.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220706120230.427296-4-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If snd_hda_hdmi_codec module is denylisted and any event causes i915
enumeration to fail, is_likely_hdmi_codec() ends in null-ptr-deref.
As snd_soc_hda is an ASoC-based driver, its initialization is delayed
until all the necessary components appear in the system - allowing
actual sound card to enumerate. snd_hda_codec_configure() gets called by
the avs-driver core during probe_codecs() but the
snd_hda_codec_device_new(), necessary to complete codecs initialization,
happens only when codec-component of hda sound card is being probed.
Denylisting snd_hda_codec_hdmi module causes snd_hda_codec_configure()
to reach: codec_bind_generic() -> is_likely_hdmi_codec() which makes use
of ->wcaps and at this point the it isn't initialized yet - again,
requires completion of snd_hda_codec_device_new().
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220706120230.427296-3-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Quite a large batch due to things building up for a couple of weeks but
all driver specific apart from Marek's documentation fix.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmLHDQcACgkQJNaLcl1U
h9DaoAf+LjanLg76KbeHMQg/IaG2dhvKJvSAjixMdLlNixMDpSOVr/2UR4lzLCpw
gfoJk9liujPjtKMsIlQT/OiVdsMROc8vfb10PdmV7rntaBwCN01aqyr4NMauOmby
ccdZlsoj7D0k3iTtP0nlZ+Xvm+L0zTEfI66bSB9UU+/h8PDSoK/RHMCjNBtqenAd
4QMQWxQTvqt3xfgrWxiZeFPUJrLFjDypEDqG8qx8roIcbzEhVYInGq52XZw3ST9o
mvC/LIFK96WvDGgiOj2UNmSuWpe3lF7cMPmomwyYkdUMcMwbSdVfDOsnAdnyqONi
RiWIr7g5NOPkYa4mSNhB9Ia1PTzf0Q==
=V5ia
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.19-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.19
Quite a large batch due to things building up for a couple of weeks but
all driver specific apart from Marek's documentation fix.
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
Audio Graph Card2 has Codec2Codec support, but I noticed
- Current Codec2Codec setting value is not correct
because it is using of_get_property().
- simple-card-utils has default Codec2Codec settings
and it is overwriting Card2 settings
- This default settings works for non Codec2Codec case
(= DPCM::BE case) too.
This patch-set solve these issues.
Free the memories allocated in sof_ipc4_get_audio_fmt in error handling
and ipc_free()
Fixes: 2cabd02b60 ("ASoC: SOF: ipc4-topology: Add support for parsing AIF_IN/AIF_OUT widgets")
Fixes: abfb536bd1 ("ASoC: SOF: ipc4-topology: Add support for parsing DAI_IN/DAI_OUT widgets")
Fixes: 4f838ab208 ("ASoC: SOF: ipc4-topology: Add support for parsing and preparing pga widgets")
Fixes: 4d4ba014ac ("ASoC: SOF: ipc4-topology: Add support for parsing mixer widgets")
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220708200516.26853-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Set the swidget->private or dai->private to NULL after kfree in the error
handling in ipc_setup(). The private needs to be set NULL because if
ipc_setup() returns error, ipc_free() will be called later. ipc_free()
will judge the private is NULL or not to do the clearing.
For dai widget, dai->private is allocated and set in dai widget
ipc_setup(). So we need to check dai->private is NULL or not
in the ipc_free().
Fixes: 2cabd02b60 ("ASoC: SOF: ipc4-topology: Add support for parsing AIF_IN/AIF_OUT widgets")
Fixes: abfb536bd1 ("ASoC: SOF: ipc4-topology: Add support for parsing DAI_IN/DAI_OUT widgets")
Fixes: 4f838ab208 ("ASoC: SOF: ipc4-topology: Add support for parsing and preparing pga widgets")
Fixes: 4d4ba014ac ("ASoC: SOF: ipc4-topology: Add support for parsing mixer widgets")
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220708200516.26853-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Module unloading operation performs memory unmapping and the weight of
the opration does not different from any other standard IPC. There is no
dependency on secondary task like in module loading scenario where
larger message timeout is recommended.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220707124153.1858249-12-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dma_set_mask() and dma_set_coherent_mask() can be performed with one
call to dma_set_mask_and_coherent(), which slightly reduces amount of
code on our side.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220707124153.1858249-9-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To allow for driver's filesystem interfaces e.g.: debugfs, to be touched
even when the device is asleep, mark IPC-channel as blocked when the
device is suspended. This causes any invocation of said interfaces that
do not toggle PM themselves to gracefully fail with "Operation not
permitted" message.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220707124153.1858249-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some LARGE_CONFIG_GETs are never expected to return payload of size 0.
Check for such situation and collapse if met.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220707124153.1858249-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no need to copy number of bytes specified by IPC message caller
if DSP firmware returned lower number. In consequence, LARGE_CONFIG_GET
handler is simplified.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220707124153.1858249-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To avoid any false positives when checking CPA after setting SPA, do a
short wait. For stall operation, give HW more time to propagate the
change before moving on.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220707124153.1858249-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For formatted port - ssp%d - descriptions to have an effect, copier
module templates need to be updated with specified port value. This
value is later propagated to the firmware when module instances are
being instantiated.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220707124153.1858249-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add i2s and dmic support for Rembrandt platform,
Add machine support for nau8825, max98360 and rt5682s,rt1019 codec
in legacy driver for rembrandt platform.
Here codec is in a slave mode.
Signed-off-by: V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>
Link: https://lore.kernel.org/r/20220707161142.491034-4-Vsujithkumar.Reddy@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ADD Generic code to support to newer platforms, add
control threshold, irq control macros ,added structure for register
offset differences.
Signed-off-by: V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>
Link: https://lore.kernel.org/r/20220707161142.491034-3-Vsujithkumar.Reddy@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove rt1019_1 codec configuration which has i2c-10EC1019:01 and
i2c-10EC1019:02 codec components, Now Using default i2c-10EC1019:00
and i2c-10EC1019:01 codec components.
Signed-off-by: V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>
Link: https://lore.kernel.org/r/20220707161142.491034-2-Vsujithkumar.Reddy@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds driver data for adl_mx98360a_cs4242 which supports
two max98360a speaker amplifiers on SSP1 and cs42l42 headphone codec
on SSP0 running on ADL platform.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220708110030.658468-3-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the capability to machine driver of creating DAI Link for BT
offload. Although BT offload always uses SSP2 port but we reserve the
flexibility to assign the port number in macro.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220708110030.658468-2-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The patch is to make driver with flexibility for more platforms support even if
the internal design is just one ADC. Besides, many I2S controllers only support
2 channels.
Signed-off-by: David Lin <CTLIN0@nuvoton.com>
Link: https://lore.kernel.org/r/20220708054647.540621-1-CTLIN0@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix below kernel warning.
>>> sound/soc/amd/acp-es8336.c:200:13: warning: variable 'ret' set but
>>> not used [-Wunused-but-set-variable]
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20220707132613.3150931-3-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Sparse warnings:
sound/soc/amd/acp-es8336.c:36:15: error: symbol 'codec_dev' was not
declared. Should it be static?
sound/soc/amd/acp-es8336.c:37:18: error: symbol 'gpio_pa' was not
declared. Should it be static?
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220707214614.61081-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current asoc_simple_init_for_codec2codec() adds default Codec2Codec
settings if rtd was Codec only.
But DPCM:BE also judged as Codec only, because dummy-DAI doesn't have
"endianness" (which is key parameter to judge as Codec).
This patch ignores setup Codec2Codec settings if it was DPCM:BE case.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87a69ts950.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Audio Graph Card2 setups own Codec2Codec settings,
but current simple-card-utils.c will try to setup Codec2Codec default
settings if needed, it will overwirtes the settings.
This patch ignores default Codec2Codec settings if it already have.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87bku9s95b.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
audio-graph-card2-custom-sample.dtsi will be used to test
Audio-Graph-Card2 behavior. But it is difficult to say that it is easy
to understand, because the comment/explanation are not so many.
This patch add verbose explanation to it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87czeps95h.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because Codec2Codec settings becomes optional, we don't need to keep
its parameter space when init time. This patch removes its default
memory allocation from simple-card-utils.c, and allocate it at
audio-graph-card2 ondemand.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87edz5s95o.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current audio-graph-card2 can use Codec2Codec, and having its
original parameter (= rate) on DT is mandatory for now.
But simple-card-utils.c has asoc_simple_init_for_codec2codec() to
setup *default* Codec2Codec settings.
This patch makes Audio Graph Card2 Codec2Codec rate settings
optional.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87fsjls95u.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Audio Graph Card2 is using of_get_property(), but it should use
of_property_read_u32() to getting rate. Otherwise the setting will be
strange value. This patch fixup it.
Fixes: c3a15c92a6 ("ASoC: audio-graph-card2: add Codec2Codec support")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87h741s961.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The struct nhlt_format's fmt_config is a flexible array, it must not be
used as normal array.
When moving to the next nhlt_fmt_cfg we need to take into account the data
behind the ->config.caps (indicated by ->config.size).
The logic of the code also changed: it is no longer saves the _last_
fmt_cfg for all found rates.
Fixes: bc2bd45b1f ("ASoC: Intel: Skylake: Parse nhlt and register clock device")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220630065638.11183-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The present flag is only set once when one rate has been found to be saved.
This will effectively going to ignore any rate discovered at later time and
based on the code, this is not the intention.
Fixes: bc2bd45b1f ("ASoC: Intel: Skylake: Parse nhlt and register clock device")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220630065638.11183-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The patch fixes the wrong state of JD1 and JD2 while the bst1 or bst2 is
power on in the HDA JD using.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Reported-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/20220705101134.16792-1-oder_chiou@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Starting from ADL platform we have four HDMI PCM devices which exceeds
the size of sof_hdmi array. Since each sof_hdmi_pcm structure
represents one HDMI PCM device, we remove the sof_hdmi array and add a
new member hdmi_jack to the sof_hdmi_pcm structure to fix the
out-of-bounds problem.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220701141517.264070-1-brent.lu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
q6apm_get_audioreach_graph() allocates a memory chunk for graph->graph
with audioreach_alloc_graph_pkt(). When idr_alloc() fails, graph->graph
is not released, which will lead to a memory leak.
We can release the graph->graph with kfree() when idr_alloc() fails to
fix the memory leak.
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220629182520.2164409-1-niejianglei2021@163.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The register default is 0x28 per the datasheet, and the amp gain field
is supposed to be shifted left by one. With the wrong default, the ALSA
controls lie about the power-up state. With the wrong shift, we get only
half the gain we expect.
Signed-off-by: Hector Martin <marcan@marcan.st>
Fixes: 827ed8a0fa ("ASoC: tas2764: Add the driver for the TAS2764")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220630075135.2221-4-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
DVC value 0xc8 is -100dB and 0xc9 is mute; this needs to map to
-100.5dB as far as the dB scale is concerned. Fix that and enable
the mute flag, so alsamixer correctly shows the control as
<0 dB .. -100 dB, mute>.
Signed-off-by: Hector Martin <marcan@marcan.st>
Fixes: 827ed8a0fa ("ASoC: tas2764: Add the driver for the TAS2764")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220630075135.2221-3-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix setting of FSYNC polarity in case of LEFT_J and DSP_A/B formats.
Do NOT set the SCFG field as was previously done, because that is not
correct and is also in conflict with the "ASI1 Source" control which
sets the same SCFG field!
Also add support for explicit polarity inversion.
Fixes: 827ed8a0fa ("ASoC: tas2764: Add the driver for the TAS2764")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220630075135.2221-2-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Make sure there is at least 1 ms delay from reset to first command as
is specified in the datasheet. This is a fix similar to commit
307f314520 ("ASoC: tas2770: Insert post reset delay").
Fixes: 827ed8a0fa ("ASoC: tas2764: Add the driver for the TAS2764")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220630075135.2221-1-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the function arizona_aif_cfg_changed uses the TX_BCLK_RATE,
however this register is not used on wm8998. This was not noticed as
previously snd_soc_component_read did not print an error message.
However, now the log gets filled with error messages, further more the
test for if the LRCLK changed will return spurious results.
Update the code to use the RX_BCLK_RATE register, the LRCLK parameters
are written to both registers and the RX_BCLK_RATE register is used
across all Arizona devices.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220628153409.3266932-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cs47l92_put_demux returns the value of snd_soc_dapm_mux_update_power,
which returns a 1 if a path was found for the kcontrol. This is
obviously different to the expected return a 1 if the control
was updated value. This results in spurious notifications to
user-space. Update the handling to only return a 1 when the value is
changed.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220628153409.3266932-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
wm8998_inmux_put returns the value of snd_soc_dapm_mux_update_power,
which returns a 1 if a path was found for the kcontrol. This is
obviously different to the expected return a 1 if the control
was updated value. This results in spurious notifications to
user-space. Update the handling to only return a 1 when the value is
changed.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220628153409.3266932-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The output compensation controls always returns zero regardless of if
the control value was updated. This results in missing notifications
to user-space of the control change. Update the handling to return 1
when the value is changed.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220628153409.3266932-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently slim_tx_mixer_get reports all TX mixers as enabled when
at least one is, due to it reading the entire tx_port_value bitmask
without testing the specific bit corresponding to a TX port.
Furthermore, using the same bitmask for all capture DAIs makes
setting one mixer affect them all. To prevent this, and since
the SLIM TX muxes effectively only connect to one of the mixers
at a time, turn tx_port_value into an int array storing the DAI
index each of the ports is connected to.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Link: https://lore.kernel.org/r/20220622061745.35399-1-y.oudjana@protonmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The tx_mask check doesn't reflect what the driver and the chip support.
The check currently checks for exactly two slots being enabled. The
tlv320adcx140 supports anything between one and eight channels, so relax
the check accordingly.
The tlv320adcx140 supports arbitrary tx_mask settings, but the driver
currently only supports adjacent slots beginning with the first slot,
so extend the check to check that the first slot is being used and that
there are no holes in the tx_mask.
Leave a comment to make it's the driver that limits the tx_mask
settings, not the chip itself.
While at it remove the set-but-unused struct adcx140p_priv::tdm_delay
field.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220624105716.2579539-1-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
max98396_dai_set_fmt() modifes register 2041 and touches bits in the mask
0x3a. Make sure to use the right mask for that operation.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Link: https://lore.kernel.org/r/20220624104712.1934484-7-daniel@zonque.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert to managed versions of sysfs and clk allocation to simplify
unbinding and error handling in probe. Managed sysfs node
creation specifically addresses the following error seen the second time
probe is attempted after sdma_pcm_platform_register() previously requsted
probe deferral:
sysfs: cannot create duplicate filename '/devices/platform/68000000.ocp/49022000.mcbsp/max_tx_thres'
Signed-off-by: David Owens <dowens@precisionplanting.com>
Link: https://lore.kernel.org/r/20220620183744.3176557-1-dowens@precisionplanting.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The example in audio-graph-card2.c has multiple nodes with the same name
in it. Change the port numbers to get different names.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220624092601.2445224-1-s.hauer@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Put the SGTL5000 in a silent/safe state on shutdown/remove, this is
required since the SGTL5000 produces a constant noise on its output
after it is configured and its clock is removed. Without this change
this is happening every time the module is unbound/removed or from
reboot till the clock is enabled again.
The issue was experienced on both a Toradex Colibri/Apalis iMX6, but can
be easily reproduced everywhere just playing something on the codec and
after that removing/unbinding the driver.
Fixes: 9b34e6cc3b ("ASoC: Add Freescale SGTL5000 codec support")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Link: https://lore.kernel.org/r/20220624101301.441314-1-francesco.dolcini@toradex.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix sparse warning:
sound/soc/fsl/fsl_utils.c:125:31: sparse: warning: Using plain integer as NULL pointer
sound/soc/fsl/fsl_utils.c:125:42: sparse: warning: Using plain integer as NULL pointer
Fixes: 7bad812554 ("ASoC: fsl_utils: Add function to handle PLL clock source")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1657192806-10569-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Aidan MacDonald <aidanmacdonald.0x0@gmail.com>:
This series is a preparatory cleanup of the jz4740-i2s driver before
adding support for a new SoC.
It's simpler to set up the playback and capture DMA settings
at driver probe time instead of during DAI probing.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220706211330.120198-3-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver doesn't require Open Firmware support. Remove the
OF-specific includes and drop the Kconfig dependency.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20220706211330.120198-2-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fixed ACPI dependency complie errors and warnings as listed below.
All warnings (new ones prefixed by >>):
sound/soc/soc-acpi.c:34:1: error: redefinition of 'snd_soc_acpi_find_machine'
34 | snd_soc_acpi_find_machine(struct snd_soc_acpi_mach *machines)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
In file included from sound/soc/soc-acpi.c:9:
include/sound/soc-acpi.h:38:1: note: previous definition of
'snd_soc_acpi_find_machine'
with type 'struct snd_soc_acpi_mach *(struct snd_soc_acpi_mach *)'
38 | snd_soc_acpi_find_machine(struct snd_soc_acpi_mach *machines)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
sound/soc/soc-acpi.c: In function 'snd_soc_acpi_find_package':
sound/soc/soc-acpi.c:58:36: error: implicit declaration of function
'acpi_fetch_acpi_dev';
did you mean 'device_match_acpi_dev'?
[-Werror=implicit-function-declaration]
58 | struct acpi_device *adev = acpi_fetch_acpi_dev(handle);
| ^~~~~~~~~~~~~~~~~~~
| device_match_acpi_dev
>> sound/soc/soc-acpi.c:58:36: warning: initialization of
'struct acpi_device *' from 'int' makes pointer from integer
without a cast [-Wint-conversion]
sound/soc/soc-acpi.c:64:25: error: invalid use of undefined type
'struct acpi_device'
64 | if (adev && adev->status.present && adev->status.functional) {
| ^~
sound/soc/soc-acpi.c:64:49: error: invalid use of undefined type
'struct acpi_device'
64 | if (adev && adev->status.present && adev->status.functional) {
| ^~
sound/soc/soc-acpi.c:80:26: error: implicit declaration of function
'acpi_extract_package' [-Werror=implicit-function-declaration]
80 | status = acpi_extract_package(myobj,
| ^~~~~~~~~~~~~~~~~~~~
sound/soc/soc-acpi.c: At top level:
sound/soc/soc-acpi.c:95:6: error: redefinition of
'snd_soc_acpi_find_package_from_hid'
95 | bool snd_soc_acpi_find_package_from_hid(const u8 hid[ACPI_ID_LEN],
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from sound/soc/soc-acpi.c:9:
include/sound/soc-acpi.h:44:1: note: previous definition of
'snd_soc_acpi_find_package_from_hid'
with type 'bool(const u8 *, struct snd_soc_acpi_package_context *)'
{aka '_Bool(const unsigned char *,
struct snd_soc_acpi_package_context *)'}
44 | snd_soc_acpi_find_package_from_hid(const u8 hid[ACPI_ID_LEN],
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/soc/soc-acpi.c:109:27: error: redefinition of
'snd_soc_acpi_codec_list'
109 | struct snd_soc_acpi_mach *snd_soc_acpi_codec_list(void *arg)
| ^~~~~~~~~~~~~~~~~~~~~~~
In file included from sound/soc/soc-acpi.c:9:
include/sound/soc-acpi.h:51:41: note: previous definition of
'snd_soc_acpi_codec_list' with type 'struct snd_soc_acpi_mach *(void *)'
51 | static inline struct snd_soc_acpi_mach
*snd_soc_acpi_codec_list(void *arg)
| ^~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20220706205515.2485601-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If more than one call of rsnd_dai_call(remove, ...) fails the platform
remove callback returns all values orred together which then makes the
driver core emit a generic error message which is little helpful.
Instead emit details of which call failed exactly and return 0. Note
returning 0 instead of an error code doesn't make a difference in the
driver core apart from the error message.
This is a preparation for making platform remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220705063613.93770-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Update printf formatting as 'ssp_port' argument is of type 'int', not
'long int'.
Fixes: e39acc4cfd ("ASoC: Intel: avs: Add I2S-test machine board")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220706062952.251704-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The DSD/PDM rate not only DSD64/128/256/512, which are the
multiple rate of 44.1kHz, but also support the multiple
rate of 8kHz, so can't force all mclk frequency to be
22579200Hz, need to assign the frequency according to
rate.
Fixes: aa736700f4 ("ASoC: imx-card: Add imx-card machine driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1657100575-8261-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Vijendar Mukunda <Vijendar.Mukunda@amd.com>:
Jadeite(JD) platform is Stoney APU varaint which uses I2S MICSP
instance and ES8336 Codec.
This patch series creates I2S platform devices for JD platform,
adds I2S MICSP instance support and Machine driver support
Merge series from Shengjiu Wang <shengjiu.wang@nxp.com>:
i.MX8MQ/MN/MM/MP platforms typically have 2 AUDIO PLLs being
configured to handle 8kHz and 11kHz series audio rates.
The patches implement the functionality to select at runtime
the appropriate AUDIO PLL for root clock, if there is no
two PLL registered, then no action taken.
device_get_match_data() in ACPI case calls similar to acpi_match_device().
Hence there is no need to duplicate the call. Just assign what is in
the id->driver_data.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220705161102.76250-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
device_get_match_data() in ACPI case calls similar to acpi_match_device().
Hence there is no need to duplicate the call. Just assign what is in
the id->driver_data.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220705161102.76250-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The dev member of struct tegra20_das is only written once in .probe().
There is no loss of functionality if the member and the assignment go away.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220629194224.175607-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
These only ever return a value != 0 if the parameter das is NULL. In the
only caller however it's already asserted this isn't the case.
So convert the functions to return void and simplify the caller
accordingly.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220629194224.175607-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
This enables the driver (at least theoretically) to bind to more than one
device.
The remove function has nothing to do now, so it is dropped.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220629194224.175607-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Since commit fcff5f9974 ("ASoC: tegra: remove unnecessary includes")
the header file (which at the time was named tegra_das.h) there is only
the actual driver that includes it. Just move the definitions into the
driver, drop the exports and remove the completely unused function.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220629194224.175607-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the error code '-EBUSY' when fail to read I2S_CLR
in rockchip_snd_rxctrl() and rockchip_snd_txctrl()
Fixes: 44f362c2cc ("ASoC: rockchip: i2s: switch BCLK to GPIO")
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20220701021427.3120549-1-judyhsiao@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
device_get_match_data() in ACPI case calls similar to acpi_match_device().
Hence there is no need to duplicate the call. Just assign what is in
the id->driver_data.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220705155813.75917-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit e39acc4cfd ("ASoC: Intel: avs: Add I2S-test machine board") adds
the config "SND_SOC_INTEL_AVS_MACH_I2S_TEST", but in the Makefile refers
to config "SND_SOC_INTEL_AVS_MACH_i2s_TEST" (notice the uppercase and
lowercase difference).
Adjust the Makefile to refer to the actual existing config.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20220705103238.7484-1-lukas.bulwahn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Returning an error value in a platform remove callback results in an error
message being emitted by the platform core, but otherwise it doesn't make
a difference. If ret is != 0, there is already an error message and another
very generic doesn't add any value, so return 0 unconditionally.
This is a preparation for making platform remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220705092645.101343-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20220705005315.663920-1-cuigaosheng1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The previous cleanup with devres may lead to the incorrect release
orders at the probe error handling due to the devres's nature. Until
we register the card, snd_card_free() has to be called at first for
releasing the stuff properly when the driver tries to manage and
release the stuff via card->private_free().
This patch fixes it by calling snd_card_free() manually on the error
from the probe callback.
Fixes: 5bff69b364 ("ALSA: cs46xx: Allocate resources with device-managed APIs")
Cc: <stable@vger.kernel.org>
Reported-and-tested-by: Jan Engelhardt <jengelh@inai.de>
Link: https://lore.kernel.org/r/p2p1s96o-746-74p4-s95-61qo1p7782pn@vanv.qr
Link: https://lore.kernel.org/r/20220705152336.350-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The patch adds the MICBIAS1 to the dapm routing while the HDA header used.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Reported-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/20220705101134.16792-2-oder_chiou@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
i.MX8MQ/MN/MM/MP platforms typically have 2 AUDIO PLLs being
configured to handle 8kHz and 11kHz series audio rates.
The patch implements the functionality to select at runtime
the appropriate AUDIO PLL as function of sysclk rate.
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1656667961-1799-5-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
i.MX8MQ/MN/MM/MP platforms typically have 2 AUDIO PLLs being
configured to handle 8kHz and 11kHz series audio rates.
The patch implements the functionality to select at runtime
the appropriate AUDIO PLL as function of audio file rate.
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1656667961-1799-4-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
i.MX8MQ/MN/MM/MP platforms typically have 2 AUDIO PLLs being
configured to handle 8kHz and 11kHz series audio rates.
The patch implements the functionality to select at runtime
the appropriate AUDIO PLL as function of audio file rate.
As the clock parent may be changed, need to probe txclk
according to sample rate again.
Signed-off-by: Viorel Suman <viorel.suman@nxp.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1656667961-1799-3-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
i.MX8MQ/MN/MM/MP platforms typically have 2 AUDIO PLLs being
configured to handle 8kHz and 11kHz series audio rates.
Add common function in fsl_utils to handle these two PLL
clock source, which are needed by CPU DAI drivers
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1656667961-1799-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sparse reports
sound/pci/hda/patch_cs8409-tables.c:79:25: warning: symbol 'cs8409_cs42l42_pincfgs_no_dmic' was not declared. Should it be static?
cs8409_cs42l42_pincfgs_no_dmic is only used by cs8409_fixups table as an
initializer for the hda_fixup element v.pins. Both are defined in the
patch_cs8408-table.c file but only cs8409_fixups is used externally in
patch_cs8409.c. So cs8409_cs42l42_pincfgs_no_dmic should have a static
storage class specifier.
The other v.pins initializers in cs8409_fixups table, though declared
extern in patch_cs8409.h are also only used in patch_cs8409-tables.c.
So change all the v.pins initializers to static.
Fixes: 9e7647b507 ("ALSA: hda/cs8409: Move arrays of configuration to a new file")
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20220704142836.636204-1-trix@redhat.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The TRACE_EVENT() macro is broken up into various parts to be efficient.
The TP_fast_assign() is just to record the event into the ring buffer, and
is to be done as fast as possible as this occurs during the actual running
of the code. The slower this is, the slower the code that is being traced
becomes.
The TP_printk() is processed when reading the tracing buffer. This is
considered the slow path. Any processing that can be moved from the
TP_fast_assign() to the TP_printk() should do so.
For some reason, the entire string processing of the trace events
hda_send_cmd, hda_get_response, and hda_unsol_event was moved from the
TP_printk() into the TP_fast_assign(). On top of that, the
__dynamic_array() was used with a fixed size of HDAC_MSG_MAX, which is
useless as a dynamic_array as it will always allocate HDAC_MSG_MAX bytes
on the ring buffer and even save that amount into the event (as it expects
the size to be dynamic, which using a fixed size defeats that purpose).
Instead, just save the necessary elements in the TP_fast_assign() and do
the string manipulation in the slow path.
The output should be the same.
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20220703110605.07a86fb2@rorschach.local.home
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pointer end is being re-assigned the same value as it was initialized
with in the previous statement. The re-assignment is redundant and
can be removed.
Cleans up clang scan-build warning:
sound/isa/wavefront/wavefront_synth.c:582:17: warning: Value stored
to 'end' during its initialization is never read
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220629102744.139673-1-colin.i.king@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This removes the need to power cycle the Dell WD15 dock if it has been
attached to a Windows machine.
The Windows driver puts the ALC4020 USB audio controller into
'manual mode', and then does all the power management and other
configuration itself, by sending HD audio commands directly to the
ALC3263 audio codec via vendor-type USB messages. If manual mode is off,
this is all handled by the firmware, and works well enough.
If manual mode is turned on, the latency of the SET INTERFACE command
goes from several hundred ms to less than 1 ms
(see https://bugzilla.suse.com/show_bug.cgi?id=1089467), but I'm not
sure if the additional code that would be required is worth it.
Funnily enough, the Windows driver tries to turn off manual mode when
the dock is disconnected, which doesn't work for obvious reasons.
Additionally, fix a bug in dell_dock_init_vol, which didn't work because
the Control Selector was missing.
Now, it properly resets the volume to 0dB.
Fixes: 964af639ad ("ALSA: usb-audio: Initialize Dell Dock playback volumes")
Signed-off-by: Jan Schär <jan@jschaer.ch>
Link: https://lore.kernel.org/r/20220627171855.42338-2-jan@jschaer.ch
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The Dell WD15 dock has a headset and a line out port. Add support for
detecting if a jack is inserted into one of these ports.
For the headset jack, additionally determine if a mic is present.
The WD15 contains an ALC4020 USB audio controller and ALC3263 audio codec
from Realtek. It is a UAC 1 device, and UAC 1 does not support jack
detection. Instead, jack detection works by sending HD Audio commands over
vendor-type USB messages.
I found out how it works by looking at USB captures on Windows.
The audio codec is very similar to the one supported by
sound/soc/codecs/rt298.c / rt298.h, some constant names and the mic
detection are adapted from there. The realtek_add_jack function is adapted
from build_connector_control in sound/usb/mixer.c.
I tested this on a WD15 dock with the latest firmware.
Signed-off-by: Jan Schär <jan@jschaer.ch>
Link: https://lore.kernel.org/r/20220627171855.42338-1-jan@jschaer.ch
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A collection of fixes for v5.19, quite large but nothing major - a good
chunk of it is more stuff that was identified by mixer-test regarding
event generation.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmK12zAACgkQJNaLcl1U
h9C1MQf/Z2R0KmA73QWqSut9IXwUGpAvPQJtx8hOUKkA7efQNcK4xywa0CbnmFLp
kUAAXD5FhpPkZpLDAmjpTVgmgB6Wep2FX5LM5YnUgC4/sha3OpnBPD3ryGVuhJ2b
X/70GfflZRmlLCzp4UALieqgRjXb/Lk6gqeCNOzr6A5ewYLq4/1h4rPRaWluZ4MQ
kjL4TXYfRXbK1g39EQMelV/HEgRiZ5NhnoujtOfQGZa8iUF9r9EAmD3PKqR0kp8d
vUD4nxt7PuQW+ksdnJuRsBII3/MwrkF8S5lgfyBW80C71YeGVaba0Ty05oTF2u2H
GAWHfoGTw1dDnI3JwcI+7ZT6zX+HpA==
=3OmW
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v5.19-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.19
A collection of fixes for v5.19, quite large but nothing major - a good
chunk of it is more stuff that was identified by mixer-test regarding
event generation.
The patch applies the same quirks used for SC-01 at firmware v1.1.0 to
the ones running v1.0.0, with respect to hard-coded sample rates.
I got two more units and successfully tested the patch series with both
firmwares.
The support is now complete (not accounting ASIO).
Signed-off-by: Egor Vorontsov <sdoregor@sdore.me>
Link: https://lore.kernel.org/r/20220627100041.2861494-2-sdoregor@sdore.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>