Now that batching of hugetlb vmemmap optimization processing is possible,
batch the freeing of vmemmap pages. When freeing vmemmap pages for a
hugetlb page, we add them to a list that is freed after the entire batch
has been processed.
This enhances the ability to return contiguous ranges of memory to the low
level allocators.
Link: https://lkml.kernel.org/r/20231019023113.345257-6-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Konrad Dybcio <konradybcio@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Usama Arif <usama.arif@bytedance.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The routine update_and_free_pages_bulk already performs vmemmap
restoration on the list of hugetlb pages in a separate step. In
preparation for more functionality to be added in this step, create a new
routine hugetlb_vmemmap_restore_folios() that will restore vmemmap for a
list of folios.
This new routine must provide sufficient feedback about errors and actual
restoration performed so that update_and_free_pages_bulk can perform
optimally.
Special care must be taken when encountering an error from
hugetlb_vmemmap_restore_folios. We want to continue making as much
forward progress as possible. A new routine bulk_vmemmap_restore_error
handles this specific situation.
Link: https://lkml.kernel.org/r/20231019023113.345257-5-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Konrad Dybcio <konradybcio@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Usama Arif <usama.arif@bytedance.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When adding hugetlb pages to the pool, we first create a list of the
allocated pages before adding to the pool. Pass this list of pages to a
new routine hugetlb_vmemmap_optimize_folios() for vmemmap optimization.
Due to significant differences in vmemmmap initialization for bootmem
allocated hugetlb pages, a new routine prep_and_add_bootmem_folios is
created.
We also modify the routine vmemmap_should_optimize() to check for pages
that are already optimized. There are code paths that might request
vmemmap optimization twice and we want to make sure this is not attempted.
Link: https://lkml.kernel.org/r/20231019023113.345257-4-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Konrad Dybcio <konradybcio@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Usama Arif <usama.arif@bytedance.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Allocation of a hugetlb page for the hugetlb pool is done by the routine
alloc_pool_huge_page. This routine will allocate contiguous pages from a
low level allocator, prep the pages for usage as a hugetlb page and then
add the resulting hugetlb page to the pool.
In the 'prep' stage, optional vmemmap optimization is done. For
performance reasons we want to perform vmemmap optimization on multiple
hugetlb pages at once. To do this, restructure the hugetlb pool
allocation code such that vmemmap optimization can be isolated and later
batched.
The code to allocate hugetlb pages from bootmem was also modified to
allow batching.
No functional changes, only code restructure.
Link: https://lkml.kernel.org/r/20231019023113.345257-3-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Tested-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Konrad Dybcio <konradybcio@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Usama Arif <usama.arif@bytedance.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Batch hugetlb vmemmap modification operations", v8.
When hugetlb vmemmap optimization was introduced, the overhead of enabling
the option was measured as described in commit 426e5c429d [1]. The
summary states that allocating a hugetlb page should be ~2x slower with
optimization and freeing a hugetlb page should be ~2-3x slower. Such
overhead was deemed an acceptable trade off for the memory savings
obtained by freeing vmemmap pages.
It was recently reported that the overhead associated with enabling
vmemmap optimization could be as high as 190x for hugetlb page
allocations. Yes, 190x! Some actual numbers from other environments are:
Bare Metal 8 socket Intel(R) Xeon(R) CPU E7-8895
------------------------------------------------
Unmodified next-20230824, vm.hugetlb_optimize_vmemmap = 0
time echo 500000 > .../hugepages-2048kB/nr_hugepages
real 0m4.119s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m4.477s
Unmodified next-20230824, vm.hugetlb_optimize_vmemmap = 1
time echo 500000 > .../hugepages-2048kB/nr_hugepages
real 0m28.973s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m36.748s
VM with 252 vcpus on host with 2 socket AMD EPYC 7J13 Milan
-----------------------------------------------------------
Unmodified next-20230824, vm.hugetlb_optimize_vmemmap = 0
time echo 524288 > .../hugepages-2048kB/nr_hugepages
real 0m2.463s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m2.931s
Unmodified next-20230824, vm.hugetlb_optimize_vmemmap = 1
time echo 524288 > .../hugepages-2048kB/nr_hugepages
real 2m27.609s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 2m29.924s
In the VM environment, the slowdown of enabling hugetlb vmemmap optimization
resulted in allocation times being 61x slower.
A quick profile showed that the vast majority of this overhead was due to
TLB flushing. Each time we modify the kernel pagetable we need to flush
the TLB. For each hugetlb that is optimized, there could be potentially
two TLB flushes performed. One for the vmemmap pages associated with the
hugetlb page, and potentially another one if the vmemmap pages are mapped
at the PMD level and must be split. The TLB flushes required for the
kernel pagetable, result in a broadcast IPI with each CPU having to flush
a range of pages, or do a global flush if a threshold is exceeded. So,
the flush time increases with the number of CPUs. In addition, in virtual
environments the broadcast IPI can’t be accelerated by hypervisor
hardware and leads to traps that need to wakeup/IPI all vCPUs which is
very expensive. Because of this the slowdown in virtual environments is
even worse than bare metal as the number of vCPUS/CPUs is increased.
The following series attempts to reduce amount of time spent in TLB
flushing. The idea is to batch the vmemmap modification operations for
multiple hugetlb pages. Instead of doing one or two TLB flushes for each
page, we do two TLB flushes for each batch of pages. One flush after
splitting pages mapped at the PMD level, and another after remapping
vmemmap associated with all hugetlb pages. Results of such batching are
as follows:
Bare Metal 8 socket Intel(R) Xeon(R) CPU E7-8895
------------------------------------------------
next-20230824 + Batching patches, vm.hugetlb_optimize_vmemmap = 0
time echo 500000 > .../hugepages-2048kB/nr_hugepages
real 0m4.719s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m4.245s
next-20230824 + Batching patches, vm.hugetlb_optimize_vmemmap = 1
time echo 500000 > .../hugepages-2048kB/nr_hugepages
real 0m7.267s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m13.199s
VM with 252 vcpus on host with 2 socket AMD EPYC 7J13 Milan
-----------------------------------------------------------
next-20230824 + Batching patches, vm.hugetlb_optimize_vmemmap = 0
time echo 524288 > .../hugepages-2048kB/nr_hugepages
real 0m2.715s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m3.186s
next-20230824 + Batching patches, vm.hugetlb_optimize_vmemmap = 1
time echo 524288 > .../hugepages-2048kB/nr_hugepages
real 0m4.799s
time echo 0 > .../hugepages-2048kB/nr_hugepages
real 0m5.273s
With batching, results are back in the 2-3x slowdown range.
This patch (of 8):
update_and_free_pages_bulk is designed to free a list of hugetlb pages
back to their associated lower level allocators. This may require
allocating vmemmmap pages associated with each hugetlb page. The hugetlb
page destructor must be changed before pages are freed to lower level
allocators. However, the destructor must be changed under the hugetlb
lock. This means there is potentially one lock cycle per page.
Minimize the number of lock cycles in update_and_free_pages_bulk by:
1) allocating necessary vmemmap for all hugetlb pages on the list
2) take hugetlb lock and clear destructor for all pages on the list
3) free all pages on list back to low level allocators
Link: https://lkml.kernel.org/r/20231019023113.345257-1-mike.kravetz@oracle.com
Link: https://lkml.kernel.org/r/20231019023113.345257-2-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: James Houghton <jthoughton@google.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Konrad Dybcio <konradybcio@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Usama Arif <usama.arif@bytedance.com>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If there is no memory allocation/freeing in the PCP (Per-CPU Pageset) of a
remote zone (zone in remote NUMA node) after some time (3 seconds for
now), the pages of the PCP of the remote zone will be drained to avoid
memory wastage.
This behavior was introduced in the commit 4ae7c03943 ("[PATCH]
Periodically drain non local pagesets") and the commit 4037d45220 ("Move
remote node draining out of slab allocators")
But, after the commit 7cc36bbddd ("vmstat: on-demand vmstat workers
V8"), the vmstat updater worker which is used to drain the PCP of remote
zones may not be re-queued when we are waiting for the timeout
(pcp->expire != 0) if there are no vmstat changes on this CPU, for
example, when the CPU goes idle or runs user space only workloads. This
may cause the pages of a remote zone be kept in PCP of this CPU for long
time. So that, the page reclaiming of the remote zone may be triggered
prematurely. This isn't a severe problem in practice, because the PCP of
the remote zone will be drained if some memory are allocated/freed again
on this CPU. And, the PCP will eventually be drained during the direct
reclaiming if necessary.
Anyway, the problem still deserves a fix via guaranteeing that the vmstat
updater worker will always be re-queued when we are waiting for the
timeout. In effect, this restores the original behavior before the commit
7cc36bbddd.
We can reproduce the bug via allocating/freeing pages from a remote zone
then go idle as follows. And the patch can fix it.
- Run some workloads, use `numactl` to bind CPU to node 0 and memory to
node 1. So the PCP of the CPU on node 0 for zone on node 1 will be
filled.
- After workloads finish, idle for 60s
- Check /proc/zoneinfo
With the original kernel, the number of pages in the PCP of the CPU on
node 0 for zone on node 1 is non-zero after idle. With the patched
kernel, it becomes 0 after idle. That is, we avoid to keep pages in the
remote PCP during idle.
Link: https://lkml.kernel.org/r/20231007062356.187621-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20230811090819.60845-1-ying.huang@intel.com
Fixes: 7cc36bbddd ("vmstat: on-demand vmstat workers V8")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
or aren't considered necessary for earlier kernel versions.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZTfz/QAKCRDdBJ7gKXxA
joMyAP99hLaLYeJbjlf+4tLJzhlpbVoFra1ieun2D+ZgFE78xQD/T4T3PYrZhYqD
WdrxGT9fiKOykXM5pmQRH9Zr4EvJBA0=
=Obbk
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2023-10-24-09-40' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"20 hotfixes. 12 are cc:stable and the remainder address post-6.5
issues or aren't considered necessary for earlier kernel versions"
* tag 'mm-hotfixes-stable-2023-10-24-09-40' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
maple_tree: add GFP_KERNEL to allocations in mas_expected_entries()
selftests/mm: include mman header to access MREMAP_DONTUNMAP identifier
mailmap: correct email aliasing for Oleksij Rempel
mailmap: map Bartosz's old address to the current one
mm/damon/sysfs: check DAMOS regions update progress from before_terminate()
MAINTAINERS: Ondrej has moved
kasan: disable kasan_non_canonical_hook() for HW tags
kasan: print the original fault addr when access invalid shadow
hugetlbfs: close race between MADV_DONTNEED and page fault
hugetlbfs: extend hugetlb_vma_lock to private VMAs
hugetlbfs: clear resv_map pointer if mmap fails
mm: zswap: fix pool refcount bug around shrink_worker()
mm/migrate: fix do_pages_move for compat pointers
riscv: fix set_huge_pte_at() for NAPOT mappings when a swap entry is set
riscv: handle VM_FAULT_[HWPOISON|HWPOISON_LARGE] faults instead of panicking
mmap: fix error paths with dup_anon_vma()
mmap: fix vma_iterator in error path of vma_merge()
mm: fix vm_brk_flags() to not bail out while holding lock
mm/mempolicy: fix set_mempolicy_home_node() previous VMA pointer
mm/page_alloc: correct start page when guard page debug is enabled
Introduce pcpu_alloc_size() to get the size of the dynamic per-cpu
area. It will be used by bpf memory allocator in the following patches.
BPF memory allocator maintains per-cpu area caches for multiple area
sizes and its free API only has the to-be-freed per-cpu pointer, so it
needs the size of dynamic per-cpu area to select the corresponding cache
when bpf program frees the dynamic per-cpu pointer.
Acked-by: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231020133202.4043247-3-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There is no need to acquire pcpu_lock for pcpu_chunk_addr_search():
1) both pcpu_first_chunk & pcpu_reserved_chunk must have been
initialized before the invocation of free_percpu().
2) The dynamically-created chunk must be valid before the per-cpu
pointers allocated from it are freed.
So acquire pcpu_lock() after the invocation of pcpu_chunk_addr_search().
Acked-by: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231020133202.4043247-2-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Readahead was factored to call generic_fadvise. That refactor added an
S_ISREG restriction which broke readahead on block devices.
In addition to S_ISREG, this change checks S_ISBLK to fix block device
readahead. There is no change in behavior with any file type besides block
devices in this change.
Fixes: 3d8f761531 ("vfs: implement readahead(2) using POSIX_FADV_WILLNEED")
Signed-off-by: Reuben Hawkins <reubenhwk@gmail.com>
Link: https://lore.kernel.org/r/20231003015704.2415-1-reubenhwk@gmail.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
__read_mostly predates __ro_after_init. Many variables which are marked
__read_mostly should have been __ro_after_init from day 1.
Also, mark some stuff as "const" and "__init" while I'm at it.
[akpm@linux-foundation.org: revert sysctl_nr_open_min, sysctl_nr_open_max changes due to arm warning]
[akpm@linux-foundation.org: coding-style cleanups]
Link: https://lkml.kernel.org/r/4f6bb9c0-abba-4ee4-a7aa-89265e886817@p183
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In order for a F_SEAL_WRITE sealed memfd mapping to have an opportunity to
clear VM_MAYWRITE, we must be able to invoke the appropriate
vm_ops->mmap() handler to do so. We would otherwise fail the
mapping_map_writable() check before we had the opportunity to avoid it.
This patch moves this check after the call_mmap() invocation. Only memfd
actively denies write access causing a potential failure here (in
memfd_add_seals()), so there should be no impact on non-memfd cases.
This patch makes the userland-visible change that MAP_SHARED, PROT_READ
mappings of an F_SEAL_WRITE sealed memfd mapping will now succeed.
There is a delicate situation with cleanup paths assuming that a writable
mapping must have occurred in circumstances where it may now not have. In
order to ensure we do not accidentally mark a writable file unwritable by
mistake, we explicitly track whether we have a writable mapping and unmap
only if we do.
[lstoakes@gmail.com: do not set writable_file_mapping in inappropriate case]
Link: https://lkml.kernel.org/r/c9eb4cc6-7db4-4c2b-838d-43a0b319a4f0@lucifer.local
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217238
Link: https://lkml.kernel.org/r/55e413d20678a1bb4c7cce889062bbb07b0df892.1697116581.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The seal_check_future_write() function is called by shmem_mmap() or
hugetlbfs_file_mmap() to disallow any future writable mappings of an memfd
sealed this way.
The F_SEAL_WRITE flag is not checked here, as that is handled via the
mapping->i_mmap_writable mechanism and so any attempt at a mapping would
fail before this could be run.
However we intend to change this, meaning this check can be performed for
F_SEAL_WRITE mappings also.
The logic here is equally applicable to both flags, so update this
function to accommodate both and rename it accordingly.
Link: https://lkml.kernel.org/r/913628168ce6cce77df7d13a63970bae06a526e0.1697116581.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "permit write-sealed memfd read-only shared mappings", v4.
The man page for fcntl() describing memfd file seals states the following
about F_SEAL_WRITE:-
Furthermore, trying to create new shared, writable memory-mappings via
mmap(2) will also fail with EPERM.
With emphasis on 'writable'. In turns out in fact that currently the
kernel simply disallows all new shared memory mappings for a memfd with
F_SEAL_WRITE applied, rendering this documentation inaccurate.
This matters because users are therefore unable to obtain a shared mapping
to a memfd after write sealing altogether, which limits their usefulness.
This was reported in the discussion thread [1] originating from a bug
report [2].
This is a product of both using the struct address_space->i_mmap_writable
atomic counter to determine whether writing may be permitted, and the
kernel adjusting this counter when any VM_SHARED mapping is performed and
more generally implicitly assuming VM_SHARED implies writable.
It seems sensible that we should only update this mapping if VM_MAYWRITE
is specified, i.e. whether it is possible that this mapping could at any
point be written to.
If we do so then all we need to do to permit write seals to function as
documented is to clear VM_MAYWRITE when mapping read-only. It turns out
this functionality already exists for F_SEAL_FUTURE_WRITE - we can
therefore simply adapt this logic to do the same for F_SEAL_WRITE.
We then hit a chicken and egg situation in mmap_region() where the check
for VM_MAYWRITE occurs before we are able to clear this flag. To work
around this, perform this check after we invoke call_mmap(), with careful
consideration of error paths.
Thanks to Andy Lutomirski for the suggestion!
[1]:https://lore.kernel.org/all/20230324133646.16101dfa666f253c4715d965@linux-foundation.org/
[2]:https://bugzilla.kernel.org/show_bug.cgi?id=217238
This patch (of 3):
There is a general assumption that VMAs with the VM_SHARED flag set are
writable. If the VM_MAYWRITE flag is not set, then this is simply not the
case.
Update those checks which affect the struct address_space->i_mmap_writable
field to explicitly test for this by introducing
[vma_]is_shared_maywrite() helper functions.
This remains entirely conservative, as the lack of VM_MAYWRITE guarantees
that the VMA cannot be written to.
Link: https://lkml.kernel.org/r/cover.1697116581.git.lstoakes@gmail.com
Link: https://lkml.kernel.org/r/d978aefefa83ec42d18dfa964ad180dbcde34795.1697116581.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Suggested-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON_SYSFS assumes all schemes will be applied for at least one DAMON
monitoring results snapshot within one aggregation interval, or makes no
sense to wait for it while DAMON is deactivated by the watermarks. That
for deactivated status still makes sense, but the aggregation interval
based assumption is invalid now because each scheme can has its own apply
interval. For schemes having larger than the aggregation or watermarks
check interval, DAMOS tried regions update request can be finished without
the update. Avoid the case by explicitly checking the status of the
schemes tried regions update and watermarks based DAMON deactivation.
Link: https://lkml.kernel.org/r/20231012192256.33556-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon/sysfs-schemes: Do DAMOS tried regions update for
only one apply interval".
DAMOS tried regions update feature of DAMON sysfs interface is doing the
update for one aggregation interval after the request is made. Since the
per-scheme apply interval is supported, that behavior makes no much sense.
That is, the tried regions directory will have regions from multiple
DAMON monitoring results snapshots, or no region for apply intervals that
much shorter than, or longer than the aggregation interval, respectively.
Update the behavior to update the regions for each scheme for only its
apply interval, and update the document.
Since DAMOS apply interval is the aggregation by default, this change
makes no visible behavioral difference to old users who don't explicitly
set the apply intervals.
Patches Sequence
----------------
The first two patches makes schemes of apply intervals that much shorter
or longer than the aggregation interval to keep the maximum and minimum
times for continuing the update. After the two patches, the update aligns
with the each scheme's apply interval.
Finally, the third patch updates the document to reflect the behavior.
This patch (of 3):
DAMON_SYSFS exposes every DAMON-found region that eligible for applying
the scheme action for one aggregation interval. However, each DAMON-based
operation scheme has its own apply interval. Hence, for a scheme that
having its apply interval much smaller than the aggregation interval,
DAMON_SYSFS will expose the scheme regions that applied to more than one
DAMON monitoring results snapshots. Since the purpose of DAMON tried
regions is exposing single snapshot, this makes no much sense. Track
progress of each scheme's tried regions update and avoid the case.
Link: https://lkml.kernel.org/r/20231012192256.33556-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20231012192256.33556-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Fix page_owner's use of free timestamps".
While page ower output is used to investigate memory utilization,
typically the allocation pathway, the introduction of timestamps to the
page owner records caused each record to become unique due to the
granularity of the nanosecond timestamp (for example):
Page allocated via order 0 ... ts 5206196026 ns, free_ts 5187156703 ns
Page allocated via order 0 ... ts 5206198540 ns, free_ts 5187162702 ns
Furthermore, the page_owner output only dumps the currently allocated
records, so having the free timestamps is nonsensical for the typical use
case.
In addition, the introduction of timestamps was not properly handled in
the page_owner_sort tool causing most use cases to be broken. This series
is meant to remove the free timestamps from the page_owner output and fix
the page_owner_sort tool so proper collation can occur.
This patch (of 5):
When printing page_owner data via the sysfs interface, no free pages will
ever be dumped due to the series of checks in read_page_owner():
/*
* Although we do have the info about past allocation of free
* pages, it's not relevant for current memory usage.
*/
if (!test_bit(PAGE_EXT_OWNER_ALLOCATED, &page_ext->flags))
The free_ts values are still used when dump_page_owner() is called, so
keeping the field for other use cases but removing them for the typical
page_owner case.
Link: https://lkml.kernel.org/r/20231013190350.579407-1-audra@redhat.com
Link: https://lkml.kernel.org/r/20231013190350.579407-2-audra@redhat.com
Fixes: 866b485262 ("mm/page_owner: record the timestamp of all pages during free")
Signed-off-by: Audra Mitchell <audra@redhat.com>
Acked-by: Rafael Aquini <aquini@redhat.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mremap uses vma_merge() in the case where a VMA needs to be extended. This
can be significantly simplified and abstracted.
This makes it far easier to understand what the actual function is doing,
avoids future mistakes in use of the confusing vma_merge() function and
importantly allows us to make future changes to how vma_merge() is
implemented by knowing explicitly which merge cases each invocation uses.
Note that in the mremap() extend case, we perform this merge only when
old_len == vma->vm_end - addr. The extension_start, i.e. the start of the
extended portion of the VMA is equal to addr + old_len, i.e. vma->vm_end.
With this refactoring, vma_merge() is no longer required anywhere except
mm/mmap.c, so mark it static.
Link: https://lkml.kernel.org/r/f16cbdc2e72d37a1a097c39dc7d1fee8919a1c93.1697043508.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Only in mmap_region() and copy_vma() do we attempt to merge VMAs which
occupy entirely new regions of virtual memory.
We can abstract this logic and make the intent of this invocations of it
completely explicit, rather than invoking vma_merge() with an inscrutable
wall of parameters.
This also paves the way for a simplification of the core vma_merge()
implementation, as we seek to make it entirely an implementation detail.
The VMA merge call in mmap_region() occurs only for file-backed mappings,
where each of the parameters previously specified as NULL are defaulted to
NULL in vma_init() (called by vm_area_alloc()).
This matches the previous behaviour of specifying NULL for a number of
fields, however note that prior to this call we pass the VMA to the file
system driver via call_mmap(), which may in theory adjust fields that we
pass in to vma_merge_new_vma().
Therefore we actually resolve an oversight here by allowing for the fact
that the driver may have done this.
Link: https://lkml.kernel.org/r/3dc71d17e307756a54781d4a4ce7315cf8b18bea.1697043508.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now the common pattern of - attempting a merge via vma_merge() and should
this fail splitting VMAs via split_vma() - has been abstracted, the former
can be placed into mm/internal.h and the latter made static.
In addition, the split_vma() nommu variant also need not be exported.
Link: https://lkml.kernel.org/r/405f2be10e20c4e9fbcc9fe6b2dfea105f6642e0.1697043508.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mprotect() and other functions which change VMA parameters over a range
each employ a pattern of:-
1. Attempt to merge the range with adjacent VMAs.
2. If this fails, and the range spans a subset of the VMA, split it
accordingly.
This is open-coded and duplicated in each case. Also in each case most of
the parameters passed to vma_merge() remain the same.
Create a new function, vma_modify(), which abstracts this operation,
accepting only those parameters which can be changed.
To avoid the mess of invoking each function call with unnecessary
parameters, create inline wrapper functions for each of the modify
operations, parameterised only by what is required to perform the action.
We can also significantly simplify the logic - by returning the VMA if we
split (or merged VMA if we do not) we no longer need specific handling for
merge/split cases in any of the call sites.
Note that the userfaultfd_release() case works even though it does not
split VMAs - since start is set to vma->vm_start and end is set to
vma->vm_end, the split logic does not trigger.
In addition, since we calculate pgoff to be equal to vma->vm_pgoff + (start
- vma->vm_start) >> PAGE_SHIFT, and start - vma->vm_start will be 0 in this
instance, this invocation will remain unchanged.
We eliminate a VM_WARN_ON() in mprotect_fixup() as this simply asserts that
vma_merge() correctly ensures that flags remain the same, something that is
already checked in is_mergeable_vma() and elsewhere, and in any case is not
specific to mprotect().
Link: https://lkml.kernel.org/r/0dfa9368f37199a423674bf0ee312e8ea0619044.1697043508.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The original problem of the overly long list of waiters on a locked page
was solved properly by commit 9a1ea439b1 ("mm:
put_and_wait_on_page_locked() while page is migrated"). In the meantime,
using bookmarks for the writeback bit can cause livelocks, so we need to
stop using them.
Link: https://lkml.kernel.org/r/20231010035829.544242-1-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Bin Lai <sclaibin@gmail.com>
Cc: Benjamin Segall <bsegall@google.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When mprotect() is used to make unwritable VMAs writable, they have the
VM_ACCOUNT flag applied and memory accounted accordingly.
If the VMA has had no pages faulted in and is then made unwritable once
again, it will remain accounted for, despite not being capable of
extending memory usage.
Consider:-
ptr = mmap(NULL, page_size * 3, PROT_READ, MAP_ANON | MAP_PRIVATE, -1, 0);
mprotect(ptr + page_size, page_size, PROT_READ | PROT_WRITE);
mprotect(ptr + page_size, page_size, PROT_READ);
The first mprotect() splits the range into 3 VMAs and the second fails to
merge the three as the middle VMA has VM_ACCOUNT set and the others do
not, rendering them unmergeable.
This is unnecessary, since no pages have actually been allocated and the
middle VMA is not capable of utilising more memory, thereby introducing
unnecessary VMA fragmentation (and accounting for more memory than is
necessary).
Since we cannot efficiently determine which pages map to an anonymous VMA,
we have to be very conservative - determining whether any pages at all
have been faulted in, by checking whether vma->anon_vma is NULL.
We can see that the lack of anon_vma implies that no anonymous pages are
present as evidenced by vma_needs_copy() utilising this on fork to
determine whether page tables need to be copied.
The only place where anon_vma is set NULL explicitly is on fork with
VM_WIPEONFORK set, however since this flag is intended to cause the child
process to not CoW on a given memory range, it is right to interpret this
as indicating the VMA has no faulted-in anonymous memory mapped.
If the VMA was forked without VM_WIPEONFORK set, then anon_vma_fork() will
have ensured that a new anon_vma is assigned (and correctly related to its
parent anon_vma) should any pages be CoW-mapped.
The overall operation is safe against races as we hold a write lock against
mm->mmap_lock.
If we could efficiently look up the VMA's faulted-in pages then we would
unaccount all those pages not yet faulted in. However as the original
comment alludes this simply isn't currently possible, so we are
conservative and account all pages or none at all.
Link: https://lkml.kernel.org/r/ad5540371a16623a069f03f4db1739f33cde1fab.1696921767.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This fixes a compiler warning when compiling an allyesconfig with W=1:
mm/internal.h:1235:9: error: function might be a candidate for `gnu_printf'
format attribute [-Werror=suggest-attribute=format]
[akpm@linux-foundation.org: fix shrinker_alloc() as welll per Qi Zheng]
Link: https://lkml.kernel.org/r/822387b7-4895-4e64-5806-0f56b5d6c447@bytedance.com
Link: https://lkml.kernel.org/r/ZSBue-3kM6gI6jCr@mainframe
Fixes: c42d50aefd ("mm: shrinker: add infrastructure for dynamically allocating shrinker")
Signed-off-by: Lucy Mielke <lucymielke@icloud.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The 6.0 commits:
commit 9fec51689f ("mm: thp: kill transparent_hugepage_active()")
commit 7da4e2cb8b ("mm: thp: kill __transhuge_page_enabled()")
merged "can we have THPs in this VMA?" logic that was previously done
separately by fault-path, khugepaged, and smaps "THPeligible" checks.
During the process, the semantics of the fault path check changed in two
ways:
1) A VM_NO_KHUGEPAGED check was introduced (also added to smaps path).
2) We no longer checked if non-anonymous memory had a vm_ops->huge_fault
handler that could satisfy the fault. Previously, this check had been
done in create_huge_pud() and create_huge_pmd() routines, but after
the changes, we never reach those routines.
During the review of the above commits, it was determined that in-tree
users weren't affected by the change; most notably, since the only
relevant user (in terms of THP) of VM_MIXEDMAP or ->huge_fault is DAX,
which is explicitly approved early in approval logic. However, this was a
bad assumption to make as it assumes the only reason to support
->huge_fault was for DAX (which is not true in general).
Remove the VM_NO_KHUGEPAGED check when not in collapse path and give any
->huge_fault handler a chance to handle the fault. Note that we don't
validate the file mode or mapping alignment, which is consistent with the
behavior before the aforementioned commits.
Link: https://lkml.kernel.org/r/20230925200110.1979606-1-zokeefe@google.com
Fixes: 7da4e2cb8b ("mm: thp: kill __transhuge_page_enabled()")
Reported-by: Saurabh Singh Sengar <ssengar@microsoft.com>
Signed-off-by: Zach O'Keefe <zokeefe@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently, hugetlb memory usage is not acounted for in the memory
controller, which could lead to memory overprotection for cgroups with
hugetlb-backed memory. This has been observed in our production system.
For instance, here is one of our usecases: suppose there are two 32G
containers. The machine is booted with hugetlb_cma=6G, and each container
may or may not use up to 3 gigantic page, depending on the workload within
it. The rest is anon, cache, slab, etc. We can set the hugetlb cgroup
limit of each cgroup to 3G to enforce hugetlb fairness. But it is very
difficult to configure memory.max to keep overall consumption, including
anon, cache, slab etc. fair.
What we have had to resort to is to constantly poll hugetlb usage and
readjust memory.max. Similar procedure is done to other memory limits
(memory.low for e.g). However, this is rather cumbersome and buggy.
Furthermore, when there is a delay in memory limits correction, (for e.g
when hugetlb usage changes within consecutive runs of the userspace
agent), the system could be in an over/underprotected state.
This patch rectifies this issue by charging the memcg when the hugetlb
folio is utilized, and uncharging when the folio is freed (analogous to
the hugetlb controller). Note that we do not charge when the folio is
allocated to the hugetlb pool, because at this point it is not owned by
any memcg.
Some caveats to consider:
* This feature is only available on cgroup v2.
* There is no hugetlb pool management involved in the memory
controller. As stated above, hugetlb folios are only charged towards
the memory controller when it is used. Host overcommit management
has to consider it when configuring hard limits.
* Failure to charge towards the memcg results in SIGBUS. This could
happen even if the hugetlb pool still has pages (but the cgroup
limit is hit and reclaim attempt fails).
* When this feature is enabled, hugetlb pages contribute to memory
reclaim protection. low, min limits tuning must take into account
hugetlb memory.
* Hugetlb pages utilized while this option is not selected will not
be tracked by the memory controller (even if cgroup v2 is remounted
later on).
Link: https://lkml.kernel.org/r/20231006184629.155543-4-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Frank van der Linden <fvdl@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun heo <tj@kernel.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
For most migration use cases, only transfer the memcg data from the old
folio to the new folio, and clear the old folio's memcg data. No charging
and uncharging will be done.
This shaves off some work on the migration path, and avoids the temporary
double charging of a folio during its migration.
The only exception is replace_page_cache_folio(), which will use the old
mem_cgroup_migrate() (now renamed to mem_cgroup_replace_folio). In that
context, the isolation of the old page isn't quite as thorough as with
migration, so we cannot use our new implementation directly.
This patch is the result of the following discussion on the new hugetlb
memcg accounting behavior:
https://lore.kernel.org/lkml/20231003171329.GB314430@monkey/
Link: https://lkml.kernel.org/r/20231006184629.155543-3-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Frank van der Linden <fvdl@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun heo <tj@kernel.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "hugetlb memcg accounting", v4.
Currently, hugetlb memory usage is not acounted for in the memory
controller, which could lead to memory overprotection for cgroups with
hugetlb-backed memory. This has been observed in our production system.
For instance, here is one of our usecases: suppose there are two 32G
containers. The machine is booted with hugetlb_cma=6G, and each container
may or may not use up to 3 gigantic page, depending on the workload within
it. The rest is anon, cache, slab, etc. We can set the hugetlb cgroup
limit of each cgroup to 3G to enforce hugetlb fairness. But it is very
difficult to configure memory.max to keep overall consumption, including
anon, cache, slab etcetera fair.
What we have had to resort to is to constantly poll hugetlb usage and
readjust memory.max. Similar procedure is done to other memory limits
(memory.low for e.g). However, this is rather cumbersome and buggy.
Furthermore, when there is a delay in memory limits correction, (for e.g
when hugetlb usage changes within consecutive runs of the userspace
agent), the system could be in an over/underprotected state.
This patch series rectifies this issue by charging the memcg when the
hugetlb folio is allocated, and uncharging when the folio is freed. In
addition, a new selftest is added to demonstrate and verify this new
behavior.
This patch (of 4):
This patch exposes charge committing and cancelling as parts of the memory
controller interface. These functionalities are useful when the
try_charge() and commit_charge() stages have to be separated by other
actions in between (which can fail). One such example is the new hugetlb
accounting behavior in the following patch.
The patch also adds a helper function to obtain a reference to the
current task's memcg.
Link: https://lkml.kernel.org/r/20231006184629.155543-1-nphamcs@gmail.com
Link: https://lkml.kernel.org/r/20231006184629.155543-2-nphamcs@gmail.com
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Frank van der Linden <fvdl@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Rik van Riel <riel@surriel.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tejun heo <tj@kernel.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Originally, hugetlb_cgroup was the only hugetlb user of tail page
structure fields. So, the code defined and checked against
HUGETLB_CGROUP_MIN_ORDER to make sure pages weren't too small to use.
However, by now, tail page #2 is used to store hugetlb hwpoison and
subpool information as well. In other words, without that tail page
hugetlb doesn't work.
Acknowledge this fact by getting rid of HUGETLB_CGROUP_MIN_ORDER and
checks against it. Instead, just check for the minimum viable page order
at hstate creation time.
Link: https://lkml.kernel.org/r/20231004153248.3842997-1-fvdl@google.com
Signed-off-by: Frank van der Linden <fvdl@google.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Match how folio_unlock() works by combining the test for PG_waiters with
the clearing of PG_writeback. This should have a small performance win,
and removes the last user of folio_wake().
Link: https://lkml.kernel.org/r/20231004165317.1061855-18-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Rather than check the result of test-and-clear, just check that we have
the writeback bit set at the start. This wouldn't catch every case, but
it's good enough (and enables the next patch).
Link: https://lkml.kernel.org/r/20231004165317.1061855-17-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Optimise folio_end_read() by setting the uptodate bit at the same time we
clear the unlock bit. This saves at least one memory barrier and one
write-after-write hazard.
Link: https://lkml.kernel.org/r/20231004165317.1061855-16-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Architectures which don't define their own use the one in
asm-generic/bitops/lock.h. Get rid of all the ifdefs around "maybe we
don't have it".
Link: https://lkml.kernel.org/r/20231004165317.1061855-15-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Replace clear_bit_and_unlock_is_negative_byte() with
xor_unlock_is_negative_byte(). We have a few places that like to lock a
folio, set a flag and unlock it again. Allow for the possibility of
combining the latter two operations for efficiency. We are guaranteed
that the caller holds the lock, so it is safe to unlock it with the xor.
The caller must guarantee that nobody else will set the flag without
holding the lock; it is not safe to do this with the PG_dirty flag, for
example.
Link: https://lkml.kernel.org/r/20231004165317.1061855-8-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Provide a function for filesystems to call when they have finished reading
an entire folio.
Link: https://lkml.kernel.org/r/20231004165317.1061855-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Some architectures have implemented optimized copy_page for full page
copying, such as arm.
On my arm platform, use the copy_page helper for single page copying is
about 10 percent faster than memcpy.
Link: https://lkml.kernel.org/r/20231006060245.7411-1-mark-pk.tsai@mediatek.com
Signed-off-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: YJ Chiang <yj.chiang@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
filemap_get_folios() is filemap_get_folios_tag() with XA_PRESENT as the
tag that is being matched. Return filemap_get_folios_tag() with
XA_PRESENT as the tag instead of duplicating the code in
filemap_get_folios().
No functional changes.
Link: https://lkml.kernel.org/r/20231006110120.136809-1-kernel@pankajraghav.com
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The next_page is only used to forward page in case target is in second
half range. Move forward page directly to remove unnecessary next_page.
Link: https://lkml.kernel.org/r/20230927103514.98281-3-shikemeng@huaweicloud.com
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Two minor cleanups to break_down_buddy_pages", v2.
Two minor cleanups to break_down_buddy_pages.
This patch (of 2):
1. We always have target in range started with next_page and full free
range started with current_buddy.
2. The last split range size is 1 << low and low should be >= 0, then
size >= 1. So page + size != page is always true (because size > 0).
As summary, current_page will not equal to target page.
Link: https://lkml.kernel.org/r/20230927103514.98281-1-shikemeng@huaweicloud.com
Link: https://lkml.kernel.org/r/20230927103514.98281-2-shikemeng@huaweicloud.com
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When tracing through the code in vma_merge(), it was not completely
clear why the error return to a dup_anon_vma() call would not overwrite
a previous attempt to the same function. This commit adds a comment
specifying why it is safe.
Link: https://lkml.kernel.org/r/20230929183041.2835469-4-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Suggested-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/linux-mm/CAG48ez3iDwFPR=Ed1BfrNuyUJPMK_=StjxhUsCkL6po1s7bONg@mail.gmail.com/
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
KASAN code is supposed to use the unchecked __memset implementation when
accessing its metadata.
Change uses of memset to __memset in mm/kasan/.
Link: https://lkml.kernel.org/r/6f621966c6f52241b5aaa7220c348be90c075371.1696605143.git.andreyknvl@google.com
Fixes: 59e6e098d1 ("kasan: introduce kasan_complete_mode_report_info")
Fixes: 3c5c3cfb9e ("kasan: support backing vmalloc space with real shadow memory")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: kernel test robot <lkp@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
get_user_pages_remote() will never return 0 except in the case of
FOLL_NOWAIT being specified, which we explicitly disallow.
This simplifies error handling for the caller and avoids the awkwardness
of dealing with both errors and failing to pin. Failing to pin here is an
error.
Link: https://lkml.kernel.org/r/00319ce292d27b3aae76a0eb220ce3f528187508.1696288092.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There really should be no circumstances under which a non-FOLL_NOWAIT GUP
operation fails to return any pages, so make this an error and warn on it.
To catch the trivial case, simply exit early if nr_pages == 0.
This brings __get_user_pages_locked() in line with the behaviour of its
nommu variant.
Link: https://lkml.kernel.org/r/2a42d96dd1e37163f90a0019a541163dafb7e4c3.1696288092.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Rather than open-coding a list of internal GUP flags in
is_valid_gup_args(), define which ones are internal.
In addition, explicitly check to see if the user passed in FOLL_TOUCH
somehow, as this appears to have been accidentally excluded.
Link: https://lkml.kernel.org/r/971e013dfe20915612ea8b704e801d7aef9a66b6.1696288092.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "various improvements to the GUP interface", v2.
A series of fixes to simplify and improve the GUP interface with an eye to
providing groundwork to future improvements:-
* __access_remote_vm() and access_remote_vm() are functionally identical,
so make the former static such that in future we can potentially change
the external-facing implementation details of this function.
* Extend is_valid_gup_args() to cover the missing FOLL_TOUCH case, and
simplify things by defining INTERNAL_GUP_FLAGS to check against.
* Adjust __get_user_pages_locked() to explicitly treat a failure to pin any
pages as an error in all circumstances other than FOLL_NOWAIT being
specified, bringing it in line with the nommu implementation of this
function.
* (With many thanks to Arnd who suggested this in the first instance)
Update get_user_page_vma_remote() to explicitly only return a page or an
error, simplifying the interface and avoiding the questionable
IS_ERR_OR_NULL() pattern.
This patch (of 4):
access_remote_vm() passes through parameters to __access_remote_vm()
directly, so remove the __access_remote_vm() function from mm.h and use
access_remote_vm() in the one caller that needs it (ptrace_access_vm()).
This allows future adjustments to the GUP-internal __access_remote_vm()
function while keeping the access_remote_vm() function stable.
Link: https://lkml.kernel.org/r/cover.1696288092.git.lstoakes@gmail.com
Link: https://lkml.kernel.org/r/f7877c5039ce1c202a514a8aeeefc5cdd5e32d19.1696288092.git.lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This function does not actively use the mm_struct, it can be removed.
Link: https://lkml.kernel.org/r/20231003144857.752952-2-gregory.price@memverge.com
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Gregory Price <gregory.price@memverge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Let's clean up do_wp_page() a bit, removing two labels and making it a
easier to read.
wp_can_reuse_anon_folio() now only operates on the whole folio. Move the
SetPageAnonExclusive() out into do_wp_page(). No need to do this under
page lock -- the page table lock is sufficient.
Link: https://lkml.kernel.org/r/20231002142949.235104-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/rmap: convert page_move_anon_rmap() to
folio_move_anon_rmap()".
Convert page_move_anon_rmap() to folio_move_anon_rmap(), letting the
callers handle PageAnonExclusive. I'm including cleanup patch #3 because
it fits into the picture and can be done cleaner by the conversion.
This patch (of 3):
Let's move it into the caller: there is a difference between whether an
anon folio can only be mapped by one process (e.g., into one VMA), and
whether it is truly exclusive (e.g., no references -- including GUP --
from other processes).
Further, for large folios the page might not actually be pointing at the
head page of the folio, so it better be handled in the caller. This is a
preparation for converting page_move_anon_rmap() to consume a folio.
Link: https://lkml.kernel.org/r/20231002142949.235104-1-david@redhat.com
Link: https://lkml.kernel.org/r/20231002142949.235104-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
I think this is a pretty rare occurrence, but for consistency handle
faults with the VMA lock held the same way that we handle other faults
with the VMA lock held.
Link: https://lkml.kernel.org/r/20231006195318.4087158-7-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Most file-backed faults are already handled through ->map_pages(), but if
we need to do I/O we'll come this way. Since filemap_fault() is now safe
to be called under the VMA lock, we can handle these faults under the VMA
lock now.
Link: https://lkml.kernel.org/r/20231006195318.4087158-6-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If the page is not currently present in the page tables, we need to call
the page fault handler to find out which page we're supposed to COW, so we
need to both check that there is already an anon_vma and that the fault
handler doesn't need the mmap_lock.
Link: https://lkml.kernel.org/r/20231006195318.4087158-5-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There are many implementations of ->fault and some of them depend on
mmap_lock being held. All vm_ops that implement ->map_pages() end up
calling filemap_fault(), which I have audited to be sure it does not rely
on mmap_lock. So (for now) key off ->map_pages existing as a flag to
indicate that it's safe to call ->fault while only holding the vma lock.
Link: https://lkml.kernel.org/r/20231006195318.4087158-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It is usually safe to call wp_page_copy() under the VMA lock. The only
unsafe situation is when no anon_vma has been allocated for this VMA, and
we have to look at adjacent VMAs to determine if their anon_vma can be
shared. Since this happens only for the first COW of a page in this VMA,
the majority of calls to wp_page_copy() do not need to fall back to the
mmap_sem.
Add vmf_anon_prepare() as an alternative to anon_vma_prepare() which will
return RETRY if we currently hold the VMA lock and need to allocate an
anon_vma. This lets us drop the check in do_wp_page().
Link: https://lkml.kernel.org/r/20231006195318.4087158-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Handle more faults under the VMA lock", v2.
At this point, we're handling the majority of file-backed page faults
under the VMA lock, using the ->map_pages entry point. This patch set
attempts to expand that for the following siutations:
- We have to do a read. This could be because we've hit the point in
the readahead window where we need to kick off the next readahead,
or because the page is simply not present in cache.
- We're handling a write fault. Most applications don't do I/O by writes
to shared mmaps for very good reasons, but some do, and it'd be nice
to not make that slow unnecessarily.
- We're doing a COW of a private mapping (both PTE already present
and PTE not-present). These are two different codepaths and I handle
both of them in this patch set.
There is no support in this patch set for drivers to mark themselves as
being VMA lock friendly; they could implement the ->map_pages
vm_operation, but if they do, they would be the first. This is probably
something we want to change at some point in the future, and I've marked
where to make that change in the code.
There is very little performance change in the benchmarks we've run;
mostly because the vast majority of page faults are handled through the
other paths. I still think this patch series is useful for workloads that
may take these paths more often, and just for cleaning up the fault path
in general (it's now clearer why we have to retry in these cases).
This patch (of 6):
Drop the VMA lock instead of the mmap_lock if that's the one which
is held.
Link: https://lkml.kernel.org/r/20231006195318.4087158-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20231006195318.4087158-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Percpu counter's compare and add are separate functions: without locking
around them (which would defeat their purpose), it has been possible to
overflow the intended limit. Imagine all the other CPUs fallocating tmpfs
huge pages to the limit, in between this CPU's compare and its add.
I have not seen reports of that happening; but tmpfs's recent addition of
dquot_alloc_block_nodirty() in between the compare and the add makes it
even more likely, and I'd be uncomfortable to leave it unfixed.
Introduce percpu_counter_limited_add(fbc, limit, amount) to prevent it.
I believe this implementation is correct, and slightly more efficient than
the combination of compare and add (taking the lock once rather than twice
when nearing full - the last 128MiB of a tmpfs volume on a machine with
128 CPUs and 4KiB pages); but it does beg for a better design - when
nearing full, there is no new batching, but the costly percpu counter sum
across CPUs still has to be done, while locked.
Follow __percpu_counter_sum()'s example, including cpu_dying_mask as well
as cpu_online_mask: but shouldn't __percpu_counter_compare() and
__percpu_counter_limited_add() then be adding a num_dying_cpus() to
num_online_cpus(), when they calculate the maximum which could be held
across CPUs? But the times when it matters would be vanishingly rare.
Link: https://lkml.kernel.org/r/bb817848-2d19-bcc8-39ca-ea179af0f0b4@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Tim Chen <tim.c.chen@intel.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Carlos Maiolino <cem@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There has been a recurring problem, that when a tmpfs volume is being
filled by racing threads, some fail with ENOSPC (or consequent SIGBUS or
EFAULT) even though all allocations were within the permitted size.
This was a problem since early days, but magnified and complicated by the
addition of huge pages. We have often worked around it by adding some
slop to the tmpfs size, but it's hard to say how much is needed, and some
users prefer not to do that e.g. keeping sparse files in a tightly
tailored tmpfs helps to prevent accidental writing to holes.
This comes from the allocation sequence:
1. check page cache for existing folio
2. check and reserve from vm_enough_memory
3. check and account from size of tmpfs
4. if huge, check page cache for overlapping folio
5. allocate physical folio, huge or small
6. check and charge from mem cgroup limit
7. add to page cache (but maybe another folio already got in).
Concurrent tasks allocating at the same position could deplete the size
allowance and fail. Doing vm_enough_memory and size checks before the
folio allocation was intentional (to limit the load on the page allocator
from this source) and still has some virtue; but memory cgroup never did
that, so I think it's better reordered to favour predictable behaviour.
1. check page cache for existing folio
2. if huge, check page cache for overlapping folio
3. allocate physical folio, huge or small
4. check and charge from mem cgroup limit
5. add to page cache (but maybe another folio already got in)
6. check and reserve from vm_enough_memory
7. check and account from size of tmpfs.
The folio lock held from allocation onwards ensures that the !uptodate
folio cannot be used by others, and can safely be deleted from the cache
if checks 6 or 7 subsequently fail (and those waiting on folio lock
already check that the folio was not truncated once they get the lock);
and the early addition to page cache ensures that racers find it before
they try to duplicate the accounting.
Seize the opportunity to tidy up shmem_get_folio_gfp()'s ENOSPC retrying,
which can be combined inside the new shmem_alloc_and_add_folio(): doing 2
splits twice (once huge, once nonhuge) is not exactly equivalent to trying
5 splits (and giving up early on huge), but let's keep it simple unless
more complication proves necessary.
Userfaultfd is a foreign country: they do things differently there, and
for good reason - to avoid mmap_lock deadlock. Leave ordering in
shmem_mfill_atomic_pte() untouched for now, but I would rather like to
mesh it better with shmem_get_folio_gfp() in the future.
Link: https://lkml.kernel.org/r/22ddd06-d919-33b-1219-56335c1bf28e@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Carlos Maiolino <cem@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Tim Chen <tim.c.chen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Extract shmem's memcg charging out of shmem_add_to_page_cache(): it's
misleading done there, because many calls are dealing with a swapcache
page, whose memcg is nowadays always remembered while swapped out, then
the charge re-levied when it's brought back into swapcache.
Temporarily move it back up to the shmem_get_folio_gfp() level, where the
memcg was charged before v5.8; but the next commit goes on to move it back
down to a new home.
In making this change, it becomes clear that shmem_swapin_folio() does not
need to know the vma, just the fault mm (if any): call it fault_mm rather
than charge_mm - let mem_cgroup_charge() decide whom to charge.
Link: https://lkml.kernel.org/r/4b2143c5-bf32-64f0-841-81a81158dac@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Carlos Maiolino <cem@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Tim Chen <tim.c.chen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
By historical accident, shmem_acct_block() and shmem_inode_acct_block()
were never pluralized when the pages argument was added, despite their
complements being shmem_unacct_blocks() and shmem_inode_unacct_blocks()
all along. It has been an irritation: fix their naming at last.
Link: https://lkml.kernel.org/r/9124094-e4ab-8be7-ef80-9a87bdc2e4fc@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Carlos Maiolino <cem@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Tim Chen <tim.c.chen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mostly removing a few superfluous blank lines, joining short arglines,
imposing some 80-column observance, correcting a couple of comments. None
of it more interesting than deleting a repeated INIT_LIST_HEAD().
Link: https://lkml.kernel.org/r/b3983d28-5d3f-8649-36af-b819285d7a9e@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Carlos Maiolino <cem@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Tim Chen <tim.c.chen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
That Trinity livelock shmem_falloc avoidance block is unlikely, and a
distraction from the proper business of shmem_fault(): separate it out.
(This used to help compilers save stack on the fault path too, but both
gcc and clang nowadays seem to make better choices anyway.)
Link: https://lkml.kernel.org/r/6fe379a4-6176-9225-9263-fe60d2633c0@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Carlos Maiolino <cem@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Tim Chen <tim.c.chen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The vma is already there in vmf->vma, so no need for a separate arg.
Link: https://lkml.kernel.org/r/d9ce6f65-a2ed-48f4-4299-fdb0544875c5@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Carlos Maiolino <cem@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Tim Chen <tim.c.chen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The existing comments in filemap_fault() suggest that, after either a
minor fault has occurred and filemap_get_folio() found a folio in the page
cache, or a major fault arose and __filemap_get_folio(FGP_CREATE...) did
the job (having relied on do_sync_mmap_readahead() or filemap_read_folio()
to read in the folio), the only possible reason it could not be uptodate
is because of an error.
This is not so, as if, for instance, the fault occurred within a VMA which
had the VM_RAND_READ flag set (via madvise() with the MADV_RANDOM flag
specified), this would cause even synchronous readahead to fail to read in
the folio.
I confirmed this by dropping page caches and faulting in memory
madvise()'d this way, observing that this code path was reached on each
occasion.
Clarify the comments to include this case, and additionally update the
comment recently added around the invalidate lock logic to make it clear
the comment explicitly refers to the minor fault case.
In addition, while we're here, refer to folios rather than pages.
[lstoakes@gmail.com: correct identation as per Christopher's feedback]
Link: https://lkml.kernel.org/r/2c7014c0-6343-4e76-8697-3f84f54350bd@lucifer.local
Link: https://lkml.kernel.org/r/20230930231029.88196-1-lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The PAGEMAP_SCAN IOCTL on the pagemap file can be used to get or optionally
clear the info about page table entries. The following operations are
supported in this IOCTL:
- Scan the address range and get the memory ranges matching the provided
criteria. This is performed when the output buffer is specified.
- Write-protect the pages. The PM_SCAN_WP_MATCHING is used to write-protect
the pages of interest. The PM_SCAN_CHECK_WPASYNC aborts the operation if
non-Async Write Protected pages are found. The ``PM_SCAN_WP_MATCHING``
can be used with or without PM_SCAN_CHECK_WPASYNC.
- Both of those operations can be combined into one atomic operation where
we can get and write protect the pages as well.
Following flags about pages are currently supported:
- PAGE_IS_WPALLOWED - Page has async-write-protection enabled
- PAGE_IS_WRITTEN - Page has been written to from the time it was write protected
- PAGE_IS_FILE - Page is file backed
- PAGE_IS_PRESENT - Page is present in the memory
- PAGE_IS_SWAPPED - Page is in swapped
- PAGE_IS_PFNZERO - Page has zero PFN
- PAGE_IS_HUGE - Page is THP or Hugetlb backed
This IOCTL can be extended to get information about more PTE bits. The
entire address range passed by user [start, end) is scanned until either
the user provided buffer is full or max_pages have been found.
[akpm@linux-foundation.org: update it for "mm: hugetlb: add huge page size param to set_huge_pte_at()"]
[akpm@linux-foundation.org: fix CONFIG_HUGETLB_PAGE=n warning]
[arnd@arndb.de: hide unused pagemap_scan_backout_range() function]
Link: https://lkml.kernel.org/r/20230927060257.2975412-1-arnd@kernel.org
[sfr@canb.auug.org.au: fix "fs/proc/task_mmu: hide unused pagemap_scan_backout_range() function"]
Link: https://lkml.kernel.org/r/20230928092223.0625c6bf@canb.auug.org.au
Link: https://lkml.kernel.org/r/20230821141518.870589-3-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Andrei Vagin <avagin@gmail.com>
Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Cc: Alex Sierra <alex.sierra@amd.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Miroslaw <emmir@google.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Paul Gofman <pgofman@codeweavers.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yun Zhou <yun.zhou@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Implement IOCTL to get and optionally clear info about
PTEs", v33.
*Motivation*
The real motivation for adding PAGEMAP_SCAN IOCTL is to emulate Windows
GetWriteWatch() and ResetWriteWatch() syscalls [1]. The GetWriteWatch()
retrieves the addresses of the pages that are written to in a region of
virtual memory.
This syscall is used in Windows applications and games etc. This syscall
is being emulated in pretty slow manner in userspace. Our purpose is to
enhance the kernel such that we translate it efficiently in a better way.
Currently some out of tree hack patches are being used to efficiently
emulate it in some kernels. We intend to replace those with these
patches. So the whole gaming on Linux can effectively get benefit from
this. It means there would be tons of users of this code.
CRIU use case [2] was mentioned by Andrei and Danylo:
> Use cases for migrating sparse VMAs are binaries sanitized with ASAN,
> MSAN or TSAN [3]. All of these sanitizers produce sparse mappings of
> shadow memory [4]. Being able to migrate such binaries allows to highly
> reduce the amount of work needed to identify and fix post-migration
> crashes, which happen constantly.
Andrei defines the following uses of this code:
* it is more granular and allows us to track changed pages more
effectively. The current interface can clear dirty bits for the entire
process only. In addition, reading info about pages is a separate
operation. It means we must freeze the process to read information
about all its pages, reset dirty bits, only then we can start dumping
pages. The information about pages becomes more and more outdated,
while we are processing pages. The new interface solves both these
downsides. First, it allows us to read pte bits and clear the
soft-dirty bit atomically. It means that CRIU will not need to freeze
processes to pre-dump their memory. Second, it clears soft-dirty bits
for a specified region of memory. It means CRIU will have actual info
about pages to the moment of dumping them.
* The new interface has to be much faster because basic page filtering
is happening in the kernel. With the old interface, we have to read
pagemap for each page.
*Implementation Evolution (Short Summary)*
From the definition of GetWriteWatch(), we feel like kernel's soft-dirty
feature can be used under the hood with some additions like:
* reset soft-dirty flag for only a specific region of memory instead of
clearing the flag for the entire process
* get and clear soft-dirty flag for a specific region atomically
So we decided to use ioctl on pagemap file to read or/and reset soft-dirty
flag. But using soft-dirty flag, sometimes we get extra pages which weren't
even written. They had become soft-dirty because of VMA merging and
VM_SOFTDIRTY flag. This breaks the definition of GetWriteWatch(). We were
able to by-pass this short coming by ignoring VM_SOFTDIRTY until David
reported that mprotect etc messes up the soft-dirty flag while ignoring
VM_SOFTDIRTY [5]. This wasn't happening until [6] got introduced. We
discussed if we can revert these patches. But we could not reach to any
conclusion. So at this point, I made couple of tries to solve this whole
VM_SOFTDIRTY issue by correcting the soft-dirty implementation:
* [7] Correct the bug fixed wrongly back in 2014. It had potential to cause
regression. We left it behind.
* [8] Keep a list of soft-dirty part of a VMA across splits and merges. I
got the reply don't increase the size of the VMA by 8 bytes.
At this point, we left soft-dirty considering it is too much delicate and
userfaultfd [9] seemed like the only way forward. From there onward, we
have been basing soft-dirty emulation on userfaultfd wp feature where
kernel resolves the faults itself when WP_ASYNC feature is used. It was
straight forward to add WP_ASYNC feature in userfautlfd. Now we get only
those pages dirty or written-to which are really written in reality. (PS
There is another WP_UNPOPULATED userfautfd feature is required which is
needed to avoid pre-faulting memory before write-protecting [9].)
All the different masks were added on the request of CRIU devs to create
interface more generic and better.
[1] https://learn.microsoft.com/en-us/windows/win32/api/memoryapi/nf-memoryapi-getwritewatch
[2] https://lore.kernel.org/all/20221014134802.1361436-1-mdanylo@google.com
[3] https://github.com/google/sanitizers
[4] https://github.com/google/sanitizers/wiki/AddressSanitizerAlgorithm#64-bit
[5] https://lore.kernel.org/all/bfcae708-db21-04b4-0bbe-712badd03071@redhat.com
[6] https://lore.kernel.org/all/20220725142048.30450-1-peterx@redhat.com/
[7] https://lore.kernel.org/all/20221122115007.2787017-1-usama.anjum@collabora.com
[8] https://lore.kernel.org/all/20221220162606.1595355-1-usama.anjum@collabora.com
[9] https://lore.kernel.org/all/20230306213925.617814-1-peterx@redhat.com
[10] https://lore.kernel.org/all/20230125144529.1630917-1-mdanylo@google.com
This patch (of 6):
Add a new userfaultfd-wp feature UFFD_FEATURE_WP_ASYNC, that allows
userfaultfd wr-protect faults to be resolved by the kernel directly.
It can be used like a high accuracy version of soft-dirty, without vma
modifications during tracking, and also with ranged support by default
rather than for a whole mm when reset the protections due to existence of
ioctl(UFFDIO_WRITEPROTECT).
Several goals of such a dirty tracking interface:
1. All types of memory should be supported and tracable. This is nature
for soft-dirty but should mention when the context is userfaultfd,
because it used to only support anon/shmem/hugetlb. The problem is for
a dirty tracking purpose these three types may not be enough, and it's
legal to track anything e.g. any page cache writes from mmap.
2. Protections can be applied to partial of a memory range, without vma
split/merge fuss. The hope is that the tracking itself should not
affect any vma layout change. It also helps when reset happens because
the reset will not need mmap write lock which can block the tracee.
3. Accuracy needs to be maintained. This means we need pte markers to work
on any type of VMA.
One could question that, the whole concept of async dirty tracking is not
really close to fundamentally what userfaultfd used to be: it's not "a
fault to be serviced by userspace" anymore. However, using userfaultfd-wp
here as a framework is convenient for us in at least:
1. VM_UFFD_WP vma flag, which has a very good name to suite something like
this, so we don't need VM_YET_ANOTHER_SOFT_DIRTY. Just use a new
feature bit to identify from a sync version of uffd-wp registration.
2. PTE markers logic can be leveraged across the whole kernel to maintain
the uffd-wp bit as long as an arch supports, this also applies to this
case where uffd-wp bit will be a hint to dirty information and it will
not go lost easily (e.g. when some page cache ptes got zapped).
3. Reuse ioctl(UFFDIO_WRITEPROTECT) interface for either starting or
resetting a range of memory, while there's no counterpart in the old
soft-dirty world, hence if this is wanted in a new design we'll need a
new interface otherwise.
We can somehow understand that commonality because uffd-wp was
fundamentally a similar idea of write-protecting pages just like
soft-dirty.
This implementation allows WP_ASYNC to imply WP_UNPOPULATED, because so
far WP_ASYNC seems to not usable if without WP_UNPOPULATE. This also
gives us chance to modify impl of WP_ASYNC just in case it could be not
depending on WP_UNPOPULATED anymore in the future kernels. It's also fine
to imply that because both features will rely on PTE_MARKER_UFFD_WP config
option, so they'll show up together (or both missing) in an UFFDIO_API
probe.
vma_can_userfault() now allows any VMA if the userfaultfd registration is
only about async uffd-wp. So we can track dirty for all kinds of memory
including generic file systems (like XFS, EXT4 or BTRFS).
One trick worth mention in do_wp_page() is that we need to manually update
vmf->orig_pte here because it can be used later with a pte_same() check -
this path always has FAULT_FLAG_ORIG_PTE_VALID set in the flags.
The major defect of this approach of dirty tracking is we need to populate
the pgtables when tracking starts. Soft-dirty doesn't do it like that.
It's unwanted in the case where the range of memory to track is huge and
unpopulated (e.g., tracking updates on a 10G file with mmap() on top,
without having any page cache installed yet). One way to improve this is
to allow pte markers exist for larger than PTE level for PMD+. That will
not change the interface if to implemented, so we can leave that for
later.
Link: https://lkml.kernel.org/r/20230821141518.870589-1-usama.anjum@collabora.com
Link: https://lkml.kernel.org/r/20230821141518.870589-2-usama.anjum@collabora.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Co-developed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Alex Sierra <alex.sierra@amd.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: "Liam R. Howlett" <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Miroslaw <emmir@google.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Nadav Amit <namit@vmware.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Paul Gofman <pgofman@codeweavers.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yun Zhou <yun.zhou@windriver.com>
Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
memcg_rstat_updated() uses the value of the state update to keep track of
the magnitude of pending updates, so that we only do a stats flush when
it's worth the work. Most values passed into memcg_rstat_updated() are in
pages, however, a few of them are actually in bytes or KBs.
To put this into perspective, a 512 byte slab allocation today would look
the same as allocating 512 pages. This may result in premature flushes,
which means unnecessary work and latency.
Normalize all the state values passed into memcg_rstat_updated() to pages.
Round up non-zero sub-page to 1 page, because memcg_rstat_updated()
ignores 0 page updates.
Link: https://lkml.kernel.org/r/20230922175741.635002-3-yosryahmed@google.com
Fixes: 5b3be698a8 ("memcg: better bounds on the memcg stats updates")
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: memcg: fix tracking of pending stats updates values", v2.
While working on adjacent code [1], I realized that the values passed into
memcg_rstat_updated() to keep track of the magnitude of pending updates is
consistent. It is mostly in pages, but sometimes it can be in bytes or
KBs. Fix that.
Patch 1 reworks memcg_page_state_unit() so that we can reuse it in patch 2
to check and normalize the units of state updates.
[1]https://lore.kernel.org/lkml/20230921081057.3440885-1-yosryahmed@google.com/
This patch (of 2):
memcg_page_state_unit() is currently used to identify the unit of a memcg
state item so that all stats in memory.stat are in bytes. However, it
lies about the units of WORKINGSET_* stats. These stats actually
represent pages, but we present them to userspace as a scalar number of
events. In retrospect, maybe those stats should have been memcg "events"
rather than memcg "state".
In preparation for using memcg_page_state_unit() for other purposes that
need to know the truthful units of different stat items, break it down
into two helpers:
- memcg_page_state_unit() retuns the actual unit of the item.
- memcg_page_state_output_unit() returns the unit used for output.
Use the latter instead of the former in memcg_page_state_output() and
lruvec_page_state_output(). While we are at it, let's show cgroup v1 some
love and add memcg_page_state_local_output() for consistency.
No functional change intended.
Link: https://lkml.kernel.org/r/20230922175741.635002-1-yosryahmed@google.com
Link: https://lkml.kernel.org/r/20230922175741.635002-2-yosryahmed@google.com
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In commit d8f5f7e445 ("hugetlb: set hugetlb page flag before
optimizing vmemmap") checks were added to print a warning if
hugetlb_vmemmap_restore was called on a non-hugetlb page.
This was mostly due to ordering issues in the hugetlb page set up and tear
down sequencees. One place missed was the routine
dissolve_free_huge_page.
Naoya Horiguchi noted: "I saw that VM_WARN_ON_ONCE() in
hugetlb_vmemmap_restore is triggered when memory_failure() is called on a
free hugetlb page with vmemmap optimization disabled (the warning is not
triggered if vmemmap optimization is enabled). I think that we need check
folio_test_hugetlb() before dissolve_free_huge_page() calls
hugetlb_vmemmap_restore_folio()."
Perform the check as suggested by Naoya.
Link: https://lkml.kernel.org/r/20231017032140.GA3680@monkey
Fixes: d8f5f7e445 ("hugetlb: set hugetlb page flag before optimizing vmemmap")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Suggested-by: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Tested-by: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Barry Song <song.bao.hua@hisilicon.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Xiongchun Duan <duanxiongchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON_SYSFS can receive DAMOS tried regions update request while kdamond
is already out of the main loop and before_terminate callback
(damon_sysfs_before_terminate() in this case) is not yet called. And
damon_sysfs_handle_cmd() can further be finished before the callback is
invoked. Then, damon_sysfs_before_terminate() unlocks damon_sysfs_lock,
which is not locked by anyone. This happens because the callback function
assumes damon_sysfs_cmd_request_callback() should be called before it.
Check if the assumption was true before doing the unlock, to avoid this
problem.
Link: https://lkml.kernel.org/r/20231007200432.3110-1-sj@kernel.org
Fixes: f1d13cacab ("mm/damon/sysfs: implement DAMOS tried regions update command")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [6.2.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
On arm64, building with CONFIG_KASAN_HW_TAGS now causes a compile-time
error:
mm/kasan/report.c: In function 'kasan_non_canonical_hook':
mm/kasan/report.c:637:20: error: 'KASAN_SHADOW_OFFSET' undeclared (first use in this function)
637 | if (addr < KASAN_SHADOW_OFFSET)
| ^~~~~~~~~~~~~~~~~~~
mm/kasan/report.c:637:20: note: each undeclared identifier is reported only once for each function it appears in
mm/kasan/report.c:640:77: error: expected expression before ';' token
640 | orig_addr = (addr - KASAN_SHADOW_OFFSET) << KASAN_SHADOW_SCALE_SHIFT;
This was caused by removing the dependency on CONFIG_KASAN_INLINE that
used to prevent this from happening. Use the more specific dependency
on KASAN_SW_TAGS || KASAN_GENERIC to only ignore the function for hwasan
mode.
Link: https://lkml.kernel.org/r/20231016200925.984439-1-arnd@kernel.org
Fixes: 12ec6a919b0f ("kasan: print the original fault addr when access invalid shadow")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Haibo Li <haibo.li@mediatek.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
when the checked address is illegal,the corresponding shadow address from
kasan_mem_to_shadow may have no mapping in mmu table. Access such shadow
address causes kernel oops. Here is a sample about oops on arm64(VA
39bit) with KASAN_SW_TAGS and KASAN_OUTLINE on:
[ffffffb80aaaaaaa] pgd=000000005d3ce003, p4d=000000005d3ce003,
pud=000000005d3ce003, pmd=0000000000000000
Internal error: Oops: 0000000096000006 [#1] PREEMPT SMP
Modules linked in:
CPU: 3 PID: 100 Comm: sh Not tainted 6.6.0-rc1-dirty #43
Hardware name: linux,dummy-virt (DT)
pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : __hwasan_load8_noabort+0x5c/0x90
lr : do_ib_ob+0xf4/0x110
ffffffb80aaaaaaa is the shadow address for efffff80aaaaaaaa.
The problem is reading invalid shadow in kasan_check_range.
The generic kasan also has similar oops.
It only reports the shadow address which causes oops but not
the original address.
Commit 2f004eea0fc8("x86/kasan: Print original address on #GP")
introduce to kasan_non_canonical_hook but limit it to KASAN_INLINE.
This patch extends it to KASAN_OUTLINE mode.
Link: https://lkml.kernel.org/r/20231009073748.159228-1-haibo.li@mediatek.com
Fixes: 2f004eea0fc8("x86/kasan: Print original address on #GP")
Signed-off-by: Haibo Li <haibo.li@mediatek.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Haibo Li <haibo.li@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Malloc libraries, like jemalloc and tcalloc, take decisions on when to
call madvise independently from the code in the main application.
This sometimes results in the application page faulting on an address,
right after the malloc library has shot down the backing memory with
MADV_DONTNEED.
Usually this is harmless, because we always have some 4kB pages sitting
around to satisfy a page fault. However, with hugetlbfs systems often
allocate only the exact number of huge pages that the application wants.
Due to TLB batching, hugetlbfs MADV_DONTNEED will free pages outside of
any lock taken on the page fault path, which can open up the following
race condition:
CPU 1 CPU 2
MADV_DONTNEED
unmap page
shoot down TLB entry
page fault
fail to allocate a huge page
killed with SIGBUS
free page
Fix that race by pulling the locking from __unmap_hugepage_final_range
into helper functions called from zap_page_range_single. This ensures
page faults stay locked out of the MADV_DONTNEED VMA until the huge pages
have actually been freed.
Link: https://lkml.kernel.org/r/20231006040020.3677377-4-riel@surriel.com
Fixes: 04ada095dc ("hugetlb: don't delete vma_lock in hugetlb MADV_DONTNEED processing")
Signed-off-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Extend the locking scheme used to protect shared hugetlb mappings from
truncate vs page fault races, in order to protect private hugetlb mappings
(with resv_map) against MADV_DONTNEED.
Add a read-write semaphore to the resv_map data structure, and use that
from the hugetlb_vma_(un)lock_* functions, in preparation for closing the
race between MADV_DONTNEED and page faults.
Link: https://lkml.kernel.org/r/20231006040020.3677377-3-riel@surriel.com
Fixes: 04ada095dc ("hugetlb: don't delete vma_lock in hugetlb MADV_DONTNEED processing")
Signed-off-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "hugetlbfs: close race between MADV_DONTNEED and page fault", v7.
Malloc libraries, like jemalloc and tcalloc, take decisions on when to
call madvise independently from the code in the main application.
This sometimes results in the application page faulting on an address,
right after the malloc library has shot down the backing memory with
MADV_DONTNEED.
Usually this is harmless, because we always have some 4kB pages sitting
around to satisfy a page fault. However, with hugetlbfs systems often
allocate only the exact number of huge pages that the application wants.
Due to TLB batching, hugetlbfs MADV_DONTNEED will free pages outside of
any lock taken on the page fault path, which can open up the following
race condition:
CPU 1 CPU 2
MADV_DONTNEED
unmap page
shoot down TLB entry
page fault
fail to allocate a huge page
killed with SIGBUS
free page
Fix that race by extending the hugetlb_vma_lock locking scheme to also
cover private hugetlb mappings (with resv_map), and pulling the locking
from __unmap_hugepage_final_range into helper functions called from
zap_page_range_single. This ensures page faults stay locked out of the
MADV_DONTNEED VMA until the huge pages have actually been freed.
This patch (of 3):
Hugetlbfs leaves a dangling pointer in the VMA if mmap fails. This has
not been a problem so far, but other code in this patch series tries to
follow that pointer.
Link: https://lkml.kernel.org/r/20231006040020.3677377-1-riel@surriel.com
Link: https://lkml.kernel.org/r/20231006040020.3677377-2-riel@surriel.com
Fixes: 04ada095dc ("hugetlb: don't delete vma_lock in hugetlb MADV_DONTNEED processing")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Rik van Riel <riel@surriel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When a zswap store fails due to the limit, it acquires a pool reference
and queues the shrinker. When the shrinker runs, it drops the reference.
However, there can be multiple store attempts before the shrinker wakes up
and runs once. This results in reference leaks and eventual saturation
warnings for the pool refcount.
Fix this by dropping the reference again when the shrinker is already
queued. This ensures one reference per shrinker run.
Link: https://lkml.kernel.org/r/20231006160024.170748-1-hannes@cmpxchg.org
Fixes: 45190f01dd ("mm/zswap.c: add allocation hysteresis if pool limit is hit")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Chris Mason <clm@fb.com>
Acked-by: Nhat Pham <nphamcs@gmail.com>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: <stable@vger.kernel.org> [5.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This change adds the "pages skipped" metric. To be able to evaluate how
successful smart page scanning is, the pages skipped metric can be
compared to the pages scanned metric.
The pages skipped metric is a cumulative counter. The counter is stored
under /sys/kernel/mm/ksm/pages_skipped.
Link: https://lkml.kernel.org/r/20230926040939.516161-3-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Smart scanning mode for KSM", v3.
This patch series adds "smart scanning" for KSM.
What is smart scanning?
=======================
KSM evaluates all the candidate pages for each scan. It does not use historic
information from previous scans. This has the effect that candidate pages that
couldn't be used for KSM de-duplication continue to be evaluated for each scan.
The idea of "smart scanning" is to keep historic information. With the historic
information we can temporarily skip the candidate page for one or several scans.
Details:
========
"Smart scanning" is to keep two small counters to store if the page has been
used for KSM. One counter stores how often we already tried to use the page for
KSM and the other counter stores how often we skip a page.
How often we skip the candidate page depends how often a page failed KSM
de-duplication. The code skips a maximum of 8 times. During testing this has
shown to be a good compromise for different workloads.
New sysfs knob:
===============
Smart scanning is not enabled by default. With /sys/kernel/mm/ksm/smart_scan
smart scanning can be enabled.
Monitoring:
===========
To monitor how effective smart scanning is a new sysfs knob has been introduced.
/sys/kernel/mm/pages_skipped report how many pages have been skipped by smart
scanning.
Results:
========
- Various workloads have shown a 20% - 25% reduction in page scans
For the instagram workload for instance, the number of pages scanned has been
reduced from over 20M pages per scan to less than 15M pages.
- Less pages scans also resulted in an overall higher de-duplication rate as
some shorter lived pages could be de-duplicated additionally
- Less pages scanned allows to reduce the pages_to_scan parameter
and this resulted in a 25% reduction in terms of CPU.
- The improvements have been observed for workloads that enable KSM with
madvise as well as prctl
This patch (of 4):
This change adds a "smart" page scanning mode for KSM. So far all the
candidate pages are continuously scanned to find candidates for
de-duplication. There are a considerably number of pages that cannot be
de-duplicated. This is costly in terms of CPU. By using smart scanning
considerable CPU savings can be achieved.
This change takes the history of scanning pages into account and skips the
page scanning of certain pages for a while if de-deduplication for this
page has not been successful in the past.
To do this it introduces two new fields in the ksm_rmap_item structure:
age and remaining_skips. age, is the KSM age and remaining_skips
determines how often scanning of this page is skipped. The age field is
incremented each time the page is scanned and the page cannot be de-
duplicated. age updated is capped at U8_MAX.
How often a page is skipped is dependent how often de-duplication has been
tried so far and the number of skips is currently limited to 8. This
value has shown to be effective with different workloads.
The feature is currently disable by default and can be enabled with the
new smart_scan knob.
The feature has shown to be very effective: upt to 25% of the page scans
can be eliminated; the pages_to_scan rate can be reduced by 40 - 50% and a
similar de-duplication rate can be maintained.
[akpm@linux-foundation.org: make ksm_smart_scan default true, for testing]
Link: https://lkml.kernel.org/r/20230926040939.516161-1-shr@devkernel.io
Link: https://lkml.kernel.org/r/20230926040939.516161-2-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Stefan Roesch <shr@devkernel.io>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Previously, a fixed abstract distance MEMTIER_DEFAULT_DAX_ADISTANCE is
used for slow memory type in kmem driver. This limits the usage of kmem
driver, for example, it cannot be used for HBM (high bandwidth memory).
So, we use the general abstract distance calculation mechanism in kmem
drivers to get more accurate abstract distance on systems with proper
support. The original MEMTIER_DEFAULT_DAX_ADISTANCE is used as fallback
only.
Now, multiple memory types may be managed by kmem. These memory types are
put into the "kmem_memory_types" list and protected by
kmem_memory_type_lock.
Link: https://lkml.kernel.org/r/20230926060628.265989-5-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Tested-by: Bharata B Rao <bharata@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Rafael J Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A memory tiering abstract distance calculation algorithm based on ACPI
HMAT is implemented. The basic idea is as follows.
The performance attributes of system default DRAM nodes are recorded as
the base line. Whose abstract distance is MEMTIER_ADISTANCE_DRAM. Then,
the ratio of the abstract distance of a memory node (target) to
MEMTIER_ADISTANCE_DRAM is scaled based on the ratio of the performance
attributes of the node to that of the default DRAM nodes.
The functions to record the read/write latency/bandwidth of the default
DRAM nodes and calculate abstract distance according to read/write
latency/bandwidth ratio will be used by CXL CDAT (Coherent Device
Attribute Table) and other memory device drivers. So, they are put in
memory-tiers.c.
Link: https://lkml.kernel.org/r/20230926060628.265989-4-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Tested-by: Bharata B Rao <bharata@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Rafael J Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "memory tiering: calculate abstract distance based on ACPI
HMAT", v4.
We have the explicit memory tiers framework to manage systems with
multiple types of memory, e.g., DRAM in DIMM slots and CXL memory devices.
Where, same kind of memory devices will be grouped into memory types,
then put into memory tiers. To describe the performance of a memory type,
abstract distance is defined. Which is in direct proportion to the memory
latency and inversely proportional to the memory bandwidth. To keep the
code as simple as possible, fixed abstract distance is used in dax/kmem to
describe slow memory such as Optane DCPMM.
To support more memory types, in this series, we added the abstract
distance calculation algorithm management mechanism, provided a algorithm
implementation based on ACPI HMAT, and used the general abstract distance
calculation interface in dax/kmem driver. So, dax/kmem can support HBM
(high bandwidth memory) in addition to the original Optane DCPMM.
This patch (of 4):
The abstract distance may be calculated by various drivers, such as ACPI
HMAT, CXL CDAT, etc. While it may be used by various code which hot-add
memory node, such as dax/kmem etc. To decouple the algorithm users and
the providers, the abstract distance calculation algorithms management
mechanism is implemented in this patch. It provides interface for the
providers to register the implementation, and interface for the users.
Multiple algorithm implementations can cooperate via calculating abstract
distance for different memory nodes. The preference of algorithm
implementations can be specified via priority (notifier_block.priority).
Link: https://lkml.kernel.org/r/20230926060628.265989-1-ying.huang@intel.com
Link: https://lkml.kernel.org/r/20230926060628.265989-2-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Tested-by: Bharata B Rao <bharata@amd.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Wei Xu <weixugc@google.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Rafael J Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
No functional difference, folio_ref_freeze() is currently a wrapper for
page_ref_freeze().
Link: https://lkml.kernel.org/r/20230926174433.81241-1-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Usama Arif <usama.arif@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Remove special cased hugetlb handling code within the page cache by
changing the granularity of ->index to the base page size rather than the
huge page size. The motivation of this patch is to reduce complexity
within the filemap code while also increasing performance by removing
branches that are evaluated on every page cache lookup.
To support the change in index, new wrappers for hugetlb page cache
interactions are added. These wrappers perform the conversion to a linear
index which is now expected by the page cache for huge pages.
========================= PERFORMANCE ======================================
Perf was used to check the performance differences after the patch.
Overall the performance is similar to mainline with a very small larger
overhead that occurs in __filemap_add_folio() and
hugetlb_add_to_page_cache(). This is because of the larger overhead that
occurs in xa_load() and xa_store() as the xarray is now using more entries
to store hugetlb folios in the page cache.
Timing
aarch64
2MB Page Size
6.5-rc3 + this patch:
[root@sidhakum-ol9-1 hugepages]# time fallocate -l 700GB test.txt
real 1m49.568s
user 0m0.000s
sys 1m49.461s
6.5-rc3:
[root]# time fallocate -l 700GB test.txt
real 1m47.495s
user 0m0.000s
sys 1m47.370s
1GB Page Size
6.5-rc3 + this patch:
[root@sidhakum-ol9-1 hugepages1G]# time fallocate -l 700GB test.txt
real 1m47.024s
user 0m0.000s
sys 1m46.921s
6.5-rc3:
[root@sidhakum-ol9-1 hugepages1G]# time fallocate -l 700GB test.txt
real 1m44.551s
user 0m0.000s
sys 1m44.438s
x86
2MB Page Size
6.5-rc3 + this patch:
[root@sidhakum-ol9-2 hugepages]# time fallocate -l 100GB test.txt
real 0m22.383s
user 0m0.000s
sys 0m22.255s
6.5-rc3:
[opc@sidhakum-ol9-2 hugepages]$ time sudo fallocate -l 100GB /dev/hugepages/test.txt
real 0m22.735s
user 0m0.038s
sys 0m22.567s
1GB Page Size
6.5-rc3 + this patch:
[root@sidhakum-ol9-2 hugepages1GB]# time fallocate -l 100GB test.txt
real 0m25.786s
user 0m0.001s
sys 0m25.589s
6.5-rc3:
[root@sidhakum-ol9-2 hugepages1G]# time fallocate -l 100GB test.txt
real 0m33.454s
user 0m0.001s
sys 0m33.193s
aarch64:
workload - fallocate a 700GB file backed by huge pages
6.5-rc3 + this patch:
2MB Page Size:
--100.00%--__arm64_sys_fallocate
ksys_fallocate
vfs_fallocate
hugetlbfs_fallocate
|
|--95.04%--__pi_clear_page
|
|--3.57%--clear_huge_page
| |
| |--2.63%--rcu_all_qs
| |
| --0.91%--__cond_resched
|
--0.67%--__cond_resched
0.17% 0.00% 0 fallocate [kernel.vmlinux] [k] hugetlb_add_to_page_cache
0.14% 0.10% 11 fallocate [kernel.vmlinux] [k] __filemap_add_folio
6.5-rc3
2MB Page Size:
--100.00%--__arm64_sys_fallocate
ksys_fallocate
vfs_fallocate
hugetlbfs_fallocate
|
|--94.91%--__pi_clear_page
|
|--4.11%--clear_huge_page
| |
| |--3.00%--rcu_all_qs
| |
| --1.10%--__cond_resched
|
--0.59%--__cond_resched
0.08% 0.01% 1 fallocate [kernel.kallsyms] [k] hugetlb_add_to_page_cache
0.05% 0.03% 3 fallocate [kernel.kallsyms] [k] __filemap_add_folio
x86
workload - fallocate a 100GB file backed by huge pages
6.5-rc3 + this patch:
2MB Page Size:
hugetlbfs_fallocate
|
--99.57%--clear_huge_page
|
--98.47%--clear_page_erms
|
--0.53%--asm_sysvec_apic_timer_interrupt
0.04% 0.04% 1 fallocate [kernel.kallsyms] [k] xa_load
0.04% 0.00% 0 fallocate [kernel.kallsyms] [k] hugetlb_add_to_page_cache
0.04% 0.00% 0 fallocate [kernel.kallsyms] [k] __filemap_add_folio
0.04% 0.00% 0 fallocate [kernel.kallsyms] [k] xas_store
6.5-rc3
2MB Page Size:
--99.93%--__x64_sys_fallocate
vfs_fallocate
hugetlbfs_fallocate
|
--99.38%--clear_huge_page
|
|--98.40%--clear_page_erms
|
--0.59%--__cond_resched
0.03% 0.03% 1 fallocate [kernel.kallsyms] [k] __filemap_add_folio
========================= TESTING ======================================
This patch passes libhugetlbfs tests and LTP hugetlb tests
********** TEST SUMMARY
* 2M
* 32-bit 64-bit
* Total testcases: 110 113
* Skipped: 0 0
* PASS: 107 113
* FAIL: 0 0
* Killed by signal: 3 0
* Bad configuration: 0 0
* Expected FAIL: 0 0
* Unexpected PASS: 0 0
* Test not present: 0 0
* Strange test result: 0 0
**********
Done executing testcases.
LTP Version: 20220527-178-g2761a81c4
page migration was also tested using Mike Kravetz's test program.[8]
[dan.carpenter@linaro.org: fix an NULL vs IS_ERR() bug]
Link: https://lkml.kernel.org/r/1772c296-1417-486f-8eef-171af2192681@moroto.mountain
Link: https://lkml.kernel.org/r/20230926192017.98183-1-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reported-and-tested-by: syzbot+c225dea486da4d5592bd@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c225dea486da4d5592bd
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
si_meminfo() will read and assign more info not just free/ram pages. For
just DAMOS_WMARK_FREE_MEM_RATE use, only get free and ram pages is ok to
save cpu.
Link: https://lkml.kernel.org/r/20230920015727.4482-1-link@vivo.com
Signed-off-by: Huan Yang <link@vivo.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The cpupid (or access time) is stored in the head page for THP, so it is
safely to make should_numa_migrate_memory() and numa_hint_fault_latency()
to take a folio. This is in preparation for large folio numa balancing.
Link: https://lkml.kernel.org/r/20230921074417.24004-7-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In preparation for large folio numa balancing, make mpol_misplaced() to
take a folio, no functional change intended.
Link: https://lkml.kernel.org/r/20230921074417.24004-6-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In preparation for large folio numa balancing, make numa_migrate_prep() to
take a folio, no functional change intended.
Link: https://lkml.kernel.org/r/20230921074417.24004-5-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Numa balancing only try to migrate non-compound page in do_numa_page(),
use a folio in it to save several compound_head calls, note we use
folio_estimated_sharers(), it is enough to check the folio sharers since
only normal page is handled, if large folio numa balancing is supported, a
precise folio sharers check would be used, no functional change intended.
Link: https://lkml.kernel.org/r/20230921074417.24004-4-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use a folio in do_huge_pmd_numa_page(), reduce three page_folio() calls to
one, no functional change intended.
Link: https://lkml.kernel.org/r/20230921074417.24004-3-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: convert numa balancing functions to use a folio", v2.
do_numa_pages() only handles non-compound pages, and only PMD-mapped THPs
are handled in do_huge_pmd_numa_page(). But a large, PTE-mapped folio
will be supported so let's convert more numa balancing functions to
use/take a folio in preparation for that, no functional change intended
for now.
This patch (of 6):
The new vm_normal_folio_pmd() wrapper is similar to vm_normal_folio(),
which allow them to completely replace the struct page variables with
struct folio variables.
Link: https://lkml.kernel.org/r/20230921074417.24004-1-wangkefeng.wang@huawei.com
Link: https://lkml.kernel.org/r/20230921074417.24004-2-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit b035f5a6d8 ("mm: slab: reduce the kmalloc() minimum alignment
if DMA bouncing possible") allows architectures with non-coherent DMA to
define a small ARCH_KMALLOC_MINALIGN (e.g. sizeof(unsigned long long))
and this has been enabled on arm64. With KASAN_HW_TAGS enabled, however,
ARCH_SLAB_MINALIGN becomes 16 on arm64 (arch_slab_minalign() dynamically
selects it since commit d949a8155d ("mm: make minimum slab alignment a
runtime property")). This can lead to a situation where kmalloc-8 caches
are attempted to be created with a kmem_caches.size aligned to 16. When
the cache is mergeable, it can lead to kernel warnings like:
sysfs: cannot create duplicate filename '/kernel/slab/:d-0000016'
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.6.0-rc1-00001-gda98843cd306-dirty #5
Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015
Call trace:
dump_backtrace+0x90/0xe8
show_stack+0x18/0x24
dump_stack_lvl+0x48/0x60
dump_stack+0x18/0x24
sysfs_warn_dup+0x64/0x80
sysfs_create_dir_ns+0xe8/0x108
kobject_add_internal+0x98/0x264
kobject_init_and_add+0x8c/0xd8
sysfs_slab_add+0x12c/0x248
slab_sysfs_init+0x98/0x14c
do_one_initcall+0x6c/0x1b0
kernel_init_freeable+0x1c0/0x288
kernel_init+0x24/0x1e0
ret_from_fork+0x10/0x20
kobject: kobject_add_internal failed for :d-0000016 with -EEXIST, don't try to register things with the same name in the same directory.
SLUB: Unable to add boot slab dma-kmalloc-8 to sysfs
Limit the __kmalloc_minalign() return value (used to create the
kmalloc-* caches) to arch_slab_minalign() so that kmalloc-8 caches are
skipped when KASAN_HW_TAGS is enabled (both config and runtime).
Reported-by: Mark Rutland <mark.rutland@arm.com>
Fixes: b035f5a6d8 ("mm: slab: reduce the kmalloc() minimum alignment if DMA bouncing possible")
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: stable@vger.kernel.org # 6.5.x
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
This makes it harder for accidental or malicious changes to
shmem_xattr_handlers at runtime.
Cc: Hugh Dickins <hughd@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mm@kvack.org
Signed-off-by: Wedson Almeida Filho <walmeida@microsoft.com>
Link: https://lore.kernel.org/r/20230930050033.41174-29-wedsonaf@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Simplify code pattern of 'folio->index + folio_nr_pages(folio)' by using
the existing helper folio_next_index() in filemap_map_pages().
Link: https://lkml.kernel.org/r/20230921081535.3398-1-duminjie@vivo.com
Signed-off-by: Minjie Du <duminjie@vivo.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Yin Fengwei <fengwei.yin@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The current memory reclaim delay statistics only count the direct memory
reclaim of the task in do_try_to_free_pages(). In systems with NUMA open,
some tasks occasionally experience slower response times, but the total
count of reclaim does not increase, using ftrace can show that
node_reclaim has occurred.
The memory reclaim occurring in get_page_from_freelist() is also due to
heavy memory load. To get the impact of tasks in memory reclaim, this
patch adds the statistics of the memory reclaim delay statistics for
__node_reclaim().
Link: https://lkml.kernel.org/r/181C946095F0252B+7cc60eca-1abf-4502-aad3-ffd8ef89d910@ex.bilibili.com
Signed-off-by: Wen Yu Li <wenyuli@ex.bilibili.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: <wangyun@bilibili.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since commit b25806dcd3d5("mm: memcontrol: deprecate swapaccounting=0
mode") do_memsw_account() is synonymous with
!cgroup_subsys_on_dfl(memory_cgrp_subsys), It always equals true in
memcg1_stat_format(). Remove the unused code.
Link: https://lkml.kernel.org/r/20230915105845.3199656-3-liushixin2@huawei.com
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Suggested-by: Michal Koutný <mkoutny@suse.com>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Tejun heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Expose swapcache stat for memcg v1", v2.
Since commit b603894248 ("mm: memcg: add swapcache stat for memcg v2")
adds swapcache stat for the cgroup v2, it seems there is no reason to hide
it in memcg v1. Conversely, with swapcached it is more accurate to
evaluate the available memory for memcg.
Link: https://lkml.kernel.org/r/20230915105845.3199656-1-liushixin2@huawei.com
Link: https://lkml.kernel.org/r/20230915105845.3199656-2-liushixin2@huawei.com
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Suggested-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Zefan Li <lizefan.x@bytedance.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
First found this typo as reviewing memory tier code. Fix it by sed like:
$ sed -i 's/sibiling/sibling/g' $(git grep -l sibiling)
so the acpi one will be corrected as well.
Link: https://lkml.kernel.org/r/20230802092856.819328-1-lizhijian@cn.fujitsu.com
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Huang, Ying <ying.huang@intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
do_pages_move does not handle compat pointers for the page list.
correctly. Add in_compat_syscall check and appropriate get_user fetch
when iterating the page list.
It makes the syscall in compat mode (32-bit userspace, 64-bit kernel)
work the same way as the native 32-bit syscall again, restoring the
behavior before my broken commit 5b1b561ba7 ("mm: simplify
compat_sys_move_pages").
More specifically, my patch moved the parsing of the 'pages' array from
the main entry point into do_pages_stat(), which left the syscall
working correctly for the 'stat' operation (nodes = NULL), while the
'move' operation (nodes != NULL) is now missing the conversion and
interprets 'pages' as an array of 64-bit pointers instead of the
intended 32-bit userspace pointers.
It is possible that nobody noticed this bug because the few
applications that actually call move_pages are unlikely to run in
compat mode because of their large memory requirements, but this
clearly fixes a user-visible regression and should have been caught by
ltp.
Link: https://lkml.kernel.org/r/20231003144857.752952-1-gregory.price@memverge.com
Fixes: 5b1b561ba7 ("mm: simplify compat_sys_move_pages")
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Co-developed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When the calling function fails after the dup_anon_vma(), the
duplication of the anon_vma is not being undone. Add the necessary
unlink_anon_vma() call to the error paths that are missing them.
This issue showed up during inspection of the error path in vma_merge()
for an unrelated vma iterator issue.
Users may experience increased memory usage, which may be problematic as
the failure would likely be caused by a low memory situation.
Link: https://lkml.kernel.org/r/20230929183041.2835469-3-Liam.Howlett@oracle.com
Fixes: d4af56c5c7 ("mm: start tracking VMAs with maple tree")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Calling vm_brk_flags() with flags set other than VM_EXEC will exit the
function without releasing the mmap_write_lock.
Just do the sanity check before the lock is acquired. This doesn't fix an
actual issue since no caller sets a flag other than VM_EXEC.
Link: https://lkml.kernel.org/r/20230929171937.work.697-kees@kernel.org
Fixes: 2e7ce7d354 ("mm/mmap: change do_brk_flags() to expand existing VMA and add do_brk_munmap()")
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When guard page debug is enabled and set_page_guard returns success, we
miss to forward page to point to start of next split range and we will do
split unexpectedly in page range without target page. Move start page
update before set_page_guard to fix this.
As we split to wrong target page, then splited pages are not able to merge
back to original order when target page is put back and splited pages
except target page is not usable. To be specific:
Consider target page is the third page in buddy page with order 2.
| buddy-2 | Page | Target | Page |
After break down to target page, we will only set first page to Guard
because of bug.
| Guard | Page | Target | Page |
When we try put_page_back_buddy with target page, the buddy page of target
if neither guard nor buddy, Then it's not able to construct original page
with order 2
| Guard | Page | buddy-0 | Page |
All pages except target page is not in free list and is not usable.
Link: https://lkml.kernel.org/r/20230927094401.68205-1-shikemeng@huaweicloud.com
Fixes: 06be6ff3d2 ("mm,hwpoison: rework soft offline for free pages")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a kthread_stop_put() helper that stops a thread and puts its task
struct. Use it to replace the various instances of kthread_stop()
followed by put_task_struct().
Remove the kthread_stop_put() macro in usbip that is similar but doesn't
return the result of kthread_stop().
[agruenba@redhat.com: fix kerneldoc comment]
Link: https://lkml.kernel.org/r/20230911111730.2565537-1-agruenba@redhat.com
[akpm@linux-foundation.org: document kthread_stop_put()'s argument]
Link: https://lkml.kernel.org/r/20230907234048.2499820-1-agruenba@redhat.com
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Current kernel only lock base size folio during mlock syscall.
Add large folio support with following rules:
- Only mlock large folio when it's in VM_LOCKED VMA range
and fully mapped to page table.
fully mapped folio is required as if folio is not fully
mapped to a VM_LOCKED VMA, if system is in memory pressure,
page reclaim is allowed to pick up this folio, split it
and reclaim the pages which are not in VM_LOCKED VMA.
- munlock will apply to the large folio which is in VMA range
or cross the VMA boundary.
This is required to handle the case that the large folio is
mlocked, later the VMA is split in the middle of large folio.
Link: https://lkml.kernel.org/r/20230918073318.1181104-4-fengwei.yin@intel.com
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If large folio is in the range of VM_LOCKED VMA, it should be mlocked to
avoid being picked by page reclaim. Which may split the large folio and
then mlock each pages again.
Mlock this kind of large folio to prevent them being picked by page
reclaim.
For the large folio which cross the boundary of VM_LOCKED VMA or not fully
mapped to VM_LOCKED VMA, we'd better not to mlock it. So if the system is
under memory pressure, this kind of large folio will be split and the
pages ouf of VM_LOCKED VMA can be reclaimed.
Ideally, for large folio, we should mlock it when the large folio is fully
mapped to VMA and munlock it if any page are unmampped from VMA. But it's
not easy to detect whether the large folio is fully mapped to VMA in some
cases (like add/remove rmap). So we update mlock_vma_folio() and
munlock_vma_folio() to mlock/munlock the folio according to vma->vm_flags.
Let caller to decide whether they should call these two functions.
For add rmap, only mlock normal 4K folio and postpone large folio handling
to page reclaim phase. It is possible to reuse page table iterator to
detect whether folio is fully mapped or not during page reclaim phase.
For remove rmap, invoke munlock_vma_folio() to munlock folio unconditionly
because rmap makes folio not fully mapped to VMA.
Link: https://lkml.kernel.org/r/20230918073318.1181104-3-fengwei.yin@intel.com
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "support large folio for mlock", v3.
Yu mentioned at [1] about the mlock() can't be applied to large folio.
I leant the related code and here is my understanding:
- For RLIMIT_MEMLOCK related, there is no problem. Because the
RLIMIT_MEMLOCK statistics is not related underneath page. That means
underneath page mlock or munlock doesn't impact the RLIMIT_MEMLOCK
statistics collection which is always correct.
- For keeping the page in RAM, there is no problem either. At least,
during try_to_unmap_one(), once detect the VMA has VM_LOCKED bit set in
vm_flags, the folio will be kept whatever the folio is mlocked or not.
So the function of mlock for large folio works. But it's not optimized
because the page reclaim needs scan these large folio and may split them.
This series identified the large folio for mlock to four types:
- The large folio is in VM_LOCKED range and fully mapped to the
range
- The large folio is in the VM_LOCKED range but not fully mapped to
the range
- The large folio cross VM_LOCKED VMA boundary
- The large folio cross last level page table boundary
For the first type, we mlock large folio so page reclaim will skip it.
For the second/third type, we don't mlock large folio. As the pages not
mapped to VM_LOACKED range are mapped to none VM_LOCKED range, if system
is in memory pressure situation, the large folio can be picked by page
reclaim and split. Then the pages not mapped to VM_LOCKED range can be
reclaimed.
For the fourth type, we don't mlock large folio because locking one page
table lock can't prevent the part in another last level page table being
unmapped. Thanks to Ryan for pointing this out.
To check whether the folio is fully mapped to the range, PTEs needs be
checked to see whether the page of folio is associated. Which needs take
page table lock and is heavy operation. So far, the only place needs this
check is madvise and page reclaim. These functions already have their own
PTE iterator.
patch1 introduce API to check whether large folio is in VMA range.
patch2 make page reclaim/mlock_vma_folio/munlock_vma_folio support
large folio mlock/munlock.
patch3 make mlock/munlock syscall support large folio.
Yu also mentioned a race which can make folio unevictable after munlock
during RFC v2 discussion [3]:
We decided that race issue didn't block this series based on:
- That race issue was not introduced by this series
- We had a looks-ok fix for that race issue. Need to wait
for mlock_count fixing patch as Yosry Ahmed suggested [4]
[1] https://lore.kernel.org/linux-mm/CAOUHufbtNPkdktjt_5qM45GegVO-rCFOMkSh0HQminQ12zsV8Q@mail.gmail.com/
[2] https://lore.kernel.org/linux-mm/20230809061105.3369958-1-fengwei.yin@intel.com/
[3] https://lore.kernel.org/linux-mm/CAOUHufZ6=9P_=CAOQyw0xw-3q707q-1FVV09dBNDC-hpcpj2Pg@mail.gmail.com/
This patch (of 3):
folio_in_range() will be used to check whether the folio is mapped to
specific VMA and whether the mapping address of folio is in the range.
Also a helper function folio_within_vma() to check whether folio
is in the range of vma based on folio_in_range().
Link: https://lkml.kernel.org/r/20230918073318.1181104-1-fengwei.yin@intel.com
Link: https://lkml.kernel.org/r/20230918073318.1181104-2-fengwei.yin@intel.com
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Change to use new address space operation dirty_folio().
Link: https://lkml.kernel.org/r/20230917-trycontrib1-v1-1-db22630b8839@gmail.com
Fixes: 6f31a5a261 ("fs: Add aops->dirty_folio")
Signed-off-by: Jianguo Bau <roidinev@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Update DAMON sysfs interface to support DAMOS apply intervals by adding a
new file, 'apply_interval_us' in each scheme directory. Users can set and
get the interval for each scheme in microseconds by writing to and reading
from the file.
Link: https://lkml.kernel.org/r/20230916020945.47296-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON-based operation schemes are applied for every aggregation interval.
That was mainly because schemes were using nr_accesses, which be complete
to be used for every aggregation interval. However, the schemes are now
using nr_accesses_bp, which is updated for each sampling interval in a way
that reasonable to be used. Therefore, there is no reason to apply
schemes for each aggregation interval.
The unnecessary alignment with aggregation interval was also making some
use cases of DAMOS tricky. Quotas setting under long aggregation interval
is one such example. Suppose the aggregation interval is ten seconds, and
there is a scheme having CPU quota 100ms per 1s. The scheme will actually
uses 100ms per ten seconds, since it cannobe be applied before next
aggregation interval. The feature is working as intended, but the results
might not that intuitive for some users. This could be fixed by updating
the quota to 1s per 10s. But, in the case, the CPU usage of DAMOS could
look like spikes, and would actually make a bad effect to other
CPU-sensitive workloads.
Implement a dedicated timing interval for each DAMON-based operation
scheme, namely apply_interval. The interval will be sampling interval
aligned, and each scheme will be applied for its apply_interval. The
interval is set to 0 by default, and it means the scheme should use the
aggregation interval instead. This avoids old users getting any
behavioral difference.
Link: https://lkml.kernel.org/r/20230916020945.47296-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON sysfs interface exposes access rate of each region via DAMOS tried
regions directory. For this, the nr_accesses field of the region is used.
DAMOS was actually using nr_accesses in the past, but it uses
nr_accesses_bp now. Use the value that it is really using as the source.
Note that this doesn't expose nr_accesses_bp as is (in basis point), but
after converting it to the natural number by dividing the value by 10,000.
Hence there is no behavioral change from users' perspective.
Link: https://lkml.kernel.org/r/20230916020945.47296-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon: implement DAMOS apply intervals".
DAMON-based operation schemes are applied for every aggregation interval.
That is mainly because schemes are using nr_accesses, which be complete to
be used for every aggregation interval.
This makes some DAMOS use cases be tricky. Quota setting under long
aggregation interval is one such example. Suppose the aggregation
interval is ten seconds, and there is a scheme having CPU quota 100ms per
1s. The scheme will actually uses 100ms per ten seconds, since it cannobe
be applied before next aggregation interval. The feature is working as
intended, but the results might not that intuitive for some users. This
could be fixed by updating the quota to 1s per 10s. But, in the case, the
CPU usage of DAMOS could look like spikes, and actually make a bad effect
to other CPU-sensitive workloads.
Also, with such huge aggregation interval, users may want schemes to be
applied more frequently.
DAMON provides nr_accesses_bp, which is updated for each sampling interval
in a way that reasonable to be used. By using that instead of
nr_accesses, DAMOS can have its own time interval and mitigate abovely
mentioned issues.
This patchset makes DAMOS schemes to use nr_accesses_bp instead of
nr_accesses, and have their own timing intervals. Also update DAMOS tried
regions sysfs files and DAMOS before_apply tracepoint to use the new data
as their source. Note that the interval is zero by default, and it is
interpreted to use the aggregation interval instead. This avoids making
user-visible behavioral changes.
Patches Seuqeunce
-----------------
The first patch (patch 1/9) makes DAMOS uses nr_accesses_bp instead of
nr_accesses, and following two patches (patches 2/9 and 3/9) updates DAMON
sysfs interface for DAMOS tried regions and the DAMOS before_apply
tracespoint to use nr_accesses_bp instead of nr_accesses, respectively.
The following two patches (patches 4/9 and 5/9) implements the
scheme-specific apply interval for DAMON kernel API users and update the
design document for the new feature.
Finally, the following four patches (patches 6/9, 7/9, 8/9 and 9/9) add
support of the feature in DAMON sysfs interface, add a simple selftest
test case, and document the new file on the usage and the ABI documents,
repsectively.
This patch (of 9):
DAMON provides nr_accesses_bp, which becomes same to nr_accesses * 10000
for every aggregation interval, but updated every sampling interval with a
reasonable accuracy. Since DAMON-based operation schemes are applied in
every aggregation interval using nr_accesses, using nr_accesses_bp instead
will make no difference to users. Meanwhile, it allows DAMOS to apply the
schemes in a time interval that less than the aggregation interval. It
could be useful and more flexible for some cases. Do it.
Link: https://lkml.kernel.org/r/20230916020945.47296-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20230916020945.47296-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Convert the callers to expect a folio and remove the unnecesary conversion
back to a struct page.
Link: https://lkml.kernel.org/r/20230824141325.2704553-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Anything found on a linked list threaded through ->lru is guaranteed to be
a folio as the compound_head found in a tail page overlaps the ->lru
member of struct page. So we can pull folios directly off these lists no
matter whether pages or folios were added to the list.
Link: https://lkml.kernel.org/r/20230824141325.2704553-3-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Small hugetlb cleanups", v2.
Some trivial folio conversions
This patch (of 3):
update_and_free_hugetlb_folio puts the memory on hpage_freelist as a folio
so we can take it off the list as a folio.
Link: https://lkml.kernel.org/r/20230824141325.2704553-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20230824141325.2704553-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The new boot flow when it comes to initialization of gigantic pages is as
follows:
- At boot time, for a gigantic page during __alloc_bootmem_hugepage, the
region after the first struct page is marked as noinit.
- This results in only the first struct page to be initialized in
reserve_bootmem_region. As the tail struct pages are not initialized at
this point, there can be a significant saving in boot time if HVO
succeeds later on.
- Later on in the boot, the head page is prepped and the first
HUGETLB_VMEMMAP_RESERVE_SIZE / sizeof(struct page) - 1 tail struct pages
are initialized.
- HVO is attempted. If it is not successful, then the rest of the tail
struct pages are initialized. If it is successful, no more tail struct
pages need to be initialized saving significant boot time.
The WARN_ON for increased ref count in gather_bootmem_prealloc was changed
to a VM_BUG_ON. This is OK as there should be no speculative references
this early in boot process. The VM_BUG_ON's are there just in case such
code is introduced.
[akpm@linux-foundation.org: make it nicer for 80 cols]
Link: https://lkml.kernel.org/r/20230913105401.519709-5-usama.arif@bytedance.com
Signed-off-by: Usama Arif <usama.arif@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Punit Agrawal <punit.agrawal@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
For reserved memory regions marked with this flag, reserve_bootmem_region
is not called during memmap_init_reserved_pages. This can be used to
avoid struct page initialization for regions which won't need them, for
e.g. hugepages with Hugepage Vmemmap Optimization enabled.
Link: https://lkml.kernel.org/r/20230913105401.519709-4-usama.arif@bytedance.com
Signed-off-by: Usama Arif <usama.arif@bytedance.com>
Acked-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Punit Agrawal <punit.agrawal@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This allows setting flags to both memblock types and is in preparation for
setting flags (for e.g. to not initialize struct pages) on reserved
memory region.
[usama.arif@bytedance.com: add missing argument definition]
Link: https://lkml.kernel.org/r/20230918090657.220463-1-usama.arif@bytedance.com
Link: https://lkml.kernel.org/r/20230913105401.519709-3-usama.arif@bytedance.com
Signed-off-by: Usama Arif <usama.arif@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Punit Agrawal <punit.agrawal@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: hugetlb: Skip initialization of gigantic tail struct
pages if freed by HVO", v5.
This series moves the boot time initialization of tail struct pages of a
gigantic page to later on in the boot. Only the
HUGETLB_VMEMMAP_RESERVE_SIZE / sizeof(struct page) - 1 tail struct pages
are initialized at the start. If HVO is successful, then no more tail
struct pages need to be initialized. For a 1G hugepage, this series avoid
initialization of 262144 - 63 = 262081 struct pages per hugepage.
When tested on a 512G system (allocating 500 1G hugepages), the kexec-boot
times with DEFERRED_STRUCT_PAGE_INIT enabled are:
- with patches, HVO enabled: 1.32 seconds
- with patches, HVO disabled: 2.15 seconds
- without patches, HVO enabled: 3.90 seconds
- without patches, HVO disabled: 3.58 seconds
This represents an approximately 70% reduction in boot time and will
significantly reduce server downtime when using a large number of gigantic
pages.
This patch (of 4):
If tail page prep and initialization is skipped, then the "start" page
will not contain the correct nid. Use the nid from first vmemap page.
Link: https://lkml.kernel.org/r/20230913105401.519709-1-usama.arif@bytedance.com
Link: https://lkml.kernel.org/r/20230913105401.519709-2-usama.arif@bytedance.com
Signed-off-by: Usama Arif <usama.arif@bytedance.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Fam Zheng <fam.zheng@bytedance.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Punit Agrawal <punit.agrawal@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The function is used by only mm/damon/core.c. Mark it as a static
function.
Link: https://lkml.kernel.org/r/20230915025251.72816-9-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
damon_merge_regions_of(), which is called for each aggregation interval,
updates nr_accesses_bp to nr_accesses * 10000. However, nr_accesses_bp is
updated for each sampling interval via damon_moving_sum() using the
aggregation interval as the moving time window. And by the definition of
the algorithm, the value becomes same to discrete-window based sum for
each time window-aligned time. Hence, nr_accesses_bp will be same to
nr_accesses * 10000 for each aggregation interval without explicit update.
Remove the unnecessary update of nr_accesses_bp in
damon_merge_regions_of().
Link: https://lkml.kernel.org/r/20230915025251.72816-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Let nr_accesses_bp be calculated as a pseudo-moving sum that updated for
every sampling interval, using damon_moving_sum(). This is assumed to be
useful for cases that the aggregation interval is set quite huge, but the
monivoting results need to be collected earlier than next aggregation
interval is passed.
Link: https://lkml.kernel.org/r/20230915025251.72816-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add yet another representation of the access rate of each region, namely
nr_accesses_bp. It is just same to the nr_accesses but represents the
value in basis point (1 in 10,000), and updated at once in every
aggregation interval. That is, moving_accesses_bp is just nr_accesses *
10000. This may seems useless at the moment. However, it will be useful
for representing less than one nr_accesses value that will be needed to
make moving sum-based nr_accesses.
Link: https://lkml.kernel.org/r/20230915025251.72816-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a simple unit test for the pseudo moving-sum function
(damon_moving_sum()).
Link: https://lkml.kernel.org/r/20230915025251.72816-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
For values that continuously change, moving average or sum are good ways
to provide fast updates while handling temporal and errorneous variability
of the value. For example, the access rate counter (nr_accesses) is
calculated as a sum of the number of positive sampled access check results
that collected during a discrete time window (aggregation interval), and
hence it handles temporal and errorneous access check results, but
provides the update only for every aggregation interval. Using a moving
sum method for that could allow providing the value for every sampling
interval. That could be useful for getting monitoring results snapshot or
running DAMOS in fine-grained timing.
However, supporting the moving sum for cases that number of samples in the
time window is arbirary could impose high overhead, since the number of
past values that it needs to keep could be too high. The nr_accesses
would also be one of the cases. To mitigate the overhead, implement a
pseudo-moving sum function that only provides an estimated pseudo-moving
sum. It assumes there was no error in last discrete time window and
subtract constant portion of last discrete time window sum.
Note that the function is not strictly implementing the moving sum, but it
keeps a property of moving sum, which makes the value same to the
dsicrete-window based sum for each time window-aligned timing. Hence,
people collecting the value in the old timings would show no difference.
Link: https://lkml.kernel.org/r/20230915025251.72816-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When getting mm_struct of the monitoring target process fails, there wil
be no need to increase the access rate counter (nr_accesses) of the
regions for the process. Hence, damon_va_check_accesses() skips calling
damon_update_region_access_rate() in the case. This breaks the assumption
that damon_update_region_access_rate() is called for every region, for
every sampling interval. Call the function for every region even in the
case. This might increase the overhead in some cases, but such case would
not be frequent, so no significant impact is really expected.
Link: https://lkml.kernel.org/r/20230915025251.72816-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon: provide pseudo-moving sum based access rate".
DAMON checks the access to each region for every sampling interval,
increase the access rate counter of the region, namely nr_accesses, if the
access was made. For every aggregation interval, the counter is reset.
The counter is exposed to users to be used as a metric showing the
relative access rate (frequency) of each region. In other words, DAMON
provides access rate of each region in every aggregation interval. The
aggregation avoids temporal access pattern changes making things
confusing. However, this also makes a few DAMON-related operations to
unnecessarily need to be aligned to the aggregation interval. This can
restrict the flexibility of DAMON applications, especially when the
aggregation interval is huge.
To provide the monitoring results in finer-grained timing while keeping
handling of temporal access pattern change, this patchset implements a
pseudo-moving sum based access rate metric. It is pseudo-moving sum
because strict moving sum implementation would need to keep all values for
last time window, and that could incur high overhead of there could be
arbitrary number of values in a time window. Especially in case of the
nr_accesses, since the sampling interval and aggregation interval can
arbitrarily set and the past values should be maintained for every region,
it could be risky. The pseudo-moving sum assumes there were no temporal
access pattern change in last discrete time window to remove the needs for
keeping the list of the last time window values. As a result, it beocmes
not strict moving sum implementation, but provides a reasonable accuracy.
Also, it keeps an important property of the moving sum. That is, the
moving sum becomes same to discrete-window based sum at the time that
aligns to the time window. This means using the pseudo moving sum based
nr_accesses makes no change to users who shows the value for every
aggregation interval.
Patches Sequence
----------------
The sequence of the patches is as follows. The first four patches are for
preparation of the change. The first two (patches 1 and 2) implements a
helper function for nr_accesses update and eliminate corner case that
skips use of the function, respectively. Following two (patches 3 and 4)
respectively implement the pseudo-moving sum function and its simple unit
test case.
Two patches for making DAMON to use the pseudo-moving sum follow. The
fifthe one (patch 5) introduces a new field for representing the
pseudo-moving sum-based access rate of each region, and the sixth one
makes the new representation to actually updated with the pseudo-moving
sum function.
Last two patches (patches 7 and 8) makes followup fixes for skipping
unnecessary updates and marking the moving sum function as static,
respectively.
This patch (of 8):
Each DAMON operarions set is updating nr_accesses field of each
damon_region for each of their access check results, from the
check_accesses() callback. Directly accessing the field could make things
complex to manage and change in future. Define and use a dedicated
function for the purpose.
Link: https://lkml.kernel.org/r/20230915025251.72816-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20230915025251.72816-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON sleeps for sampling interval after each sampling, and check if the
aggregation interval and the ops update interval have passed using
ktime_get_coarse_ts64() and baseline timestamps for the intervals. That
design is for making the operations occur at deterministic timing
regardless of the time that spend for each work. However, it turned out
it is not that useful, and incur not-that-intuitive results.
After all, timer functions, and especially sleep functions that DAMON uses
to wait for specific timing, are not necessarily strictly accurate. It is
legal design, so no problem. However, depending on such inaccuracies, the
nr_accesses can be larger than aggregation interval divided by sampling
interval. For example, with the default setting (5 ms sampling interval
and 100 ms aggregation interval) we frequently show regions having
nr_accesses larger than 20. Also, if the execution of a DAMOS scheme
takes a long time, next aggregation could happen before enough number of
samples are collected. This is not what usual users would intuitively
expect.
Since access check sampling is the smallest unit work of DAMON, using the
number of passed sampling intervals as the DAMON-internal timer can easily
avoid these problems. That is, convert aggregation and ops update
intervals to numbers of sampling intervals that need to be passed before
those operations be executed, count the number of passed sampling
intervals, and invoke the operations as soon as the specific amount of
sampling intervals passed. Make the change.
Note that this could make a behavioral change to settings that using
intervals that not aligned by the sampling interval. For example, if the
sampling interval is 5 ms and the aggregation interval is 12 ms, DAMON
effectively uses 15 ms as its aggregation interval, because it checks
whether the aggregation interval after sleeping the sampling interval.
This change will make DAMON to effectively use 10 ms as aggregation
interval, since it uses 'aggregation interval / sampling interval *
sampling interval' as the effective aggregation interval, and we don't use
floating point types. Usual users would have used aligned intervals, so
this behavioral change is not expected to make any meaningful impact, so
just make this change.
Link: https://lkml.kernel.org/r/20230914021523.60649-1-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When dealing with hugetlb pages, manipulating struct page pointers
directly can get to wrong struct page, since struct page is not guaranteed
to be contiguous on SPARSEMEM without VMEMMAP. Use pfn calculation to
handle it properly.
Without the fix, a wrong number of page might be skipped. Since skip cannot be
negative, scan_movable_page() will end early and might miss a movable page with
-ENOENT. This might fail offline_pages(). No bug is reported. The fix comes
from code inspection.
Link: https://lkml.kernel.org/r/20230913201248.452081-4-zi.yan@sent.com
Fixes: eeb0efd071 ("mm,memory_hotplug: fix scan_movable_pages() for gigantic hugepages")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When dealing with hugetlb pages, manipulating struct page pointers
directly can get to wrong struct page, since struct page is not guaranteed
to be contiguous on SPARSEMEM without VMEMMAP. Use nth_page() to handle
it properly.
A wrong or non-existing page might be tried to be grabbed, either
leading to a non freeable page or kernel memory access errors. No bug
is reported. It comes from code inspection.
Link: https://lkml.kernel.org/r/20230913201248.452081-3-zi.yan@sent.com
Fixes: 57a196a584 ("hugetlb: simplify hugetlb handling in follow_page_mask")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Use nth_page() in place of direct struct page manipulation",
v3.
On SPARSEMEM without VMEMMAP, struct page is not guaranteed to be
contiguous, since each memory section's memmap might be allocated
independently. hugetlb pages can go beyond a memory section size, thus
direct struct page manipulation on hugetlb pages/subpages might give wrong
struct page. Kernel provides nth_page() to do the manipulation properly.
Use that whenever code can see hugetlb pages.
This patch (of 5):
When dealing with hugetlb pages, manipulating struct page pointers
directly can get to wrong struct page, since struct page is not guaranteed
to be contiguous on SPARSEMEM without VMEMMAP. Use nth_page() to handle
it properly.
Without the fix, page_kasan_tag_reset() could reset wrong page tags,
causing a wrong kasan result. No related bug is reported. The fix
comes from code inspection.
Link: https://lkml.kernel.org/r/20230913201248.452081-1-zi.yan@sent.com
Link: https://lkml.kernel.org/r/20230913201248.452081-2-zi.yan@sent.com
Fixes: 2813b9c029 ("kasan, mm, arm64: tag non slab memory allocated via pagealloc")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Muchun Song <songmuchun@bytedance.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This isolate_mode_t flag is effectively unused since 89f6c88a6a ("mm:
__isolate_lru_page_prepare() in isolate_migratepages_block()") as
sc->may_unmap is now checked directly (and only node_reclaim has a mode
that sets it to 0). The last remaining place is mm_vmscan_lru_isolate
tracepoint for the isolate_mode parameter. That one was mainly used to
indicate the active/inactive mode, which the trace-vmscan-postprocess.pl
script consumed, but that got silently broken. After fixing the script by
the previous patch, it does not need the isolate_mode anymore. So just
remove the parameter and with that the whole ISOLATE_UNMAPPED flag.
Link: https://lkml.kernel.org/r/20230914131637.12204-4-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon: add a tracepoint for damos apply target regions",
v2.
DAMON provides damon_aggregated tracepoint to let users record full
monitoring results. Sometimes, users need to record monitoring results of
specific pattern. DAMOS tried regions directory of DAMON sysfs interface
allows it, but the interface is mainly designed for snapshots and
therefore would be inefficient for such recording. Implement yet another
tracepoint for efficient support of the usecase.
This patch (of 2):
DAMON provides damon_aggregated tracepoint, which exposes details of each
region and its access monitoring results. It is useful for getting whole
monitoring results, e.g., for recording purposes.
For investigations of DAMOS, DAMON Sysfs interface provides DAMOS
statistics and tried_regions directory. But, those provides only
statistics and snapshots. If the scheme is frequently applied and if the
user needs to know every detail of DAMOS behavior, the snapshot-based
interface could be insufficient and expensive.
As a last resort, userspace users need to record the all monitoring
results via damon_aggregated tracepoint and simulate how DAMOS would
worked. It is unnecessarily complicated. DAMON kernel API users,
meanwhile, can do that easily via before_damos_apply() callback field of
'struct damon_callback', though.
Add a tracepoint that will be called just after before_damos_apply()
callback for more convenient investigations of DAMOS. The tracepoint
exposes all details about each regions, similar to damon_aggregated
tracepoint.
Please note that DAMOS is currently not only for memory management but
also for query-like efficient monitoring results retrievals (when 'stat'
action is used). Until now, only statistics or snapshots were supported.
Addition of this tracepoint allows efficient full recording of DAMOS-based
filtered monitoring results.
Link: https://lkml.kernel.org/r/20230913022050.2109-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20230913022050.2109-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org> [tracing]
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Directly check the return of isolate_hugetlb() and folio_isolate_lru() to
remove isolated variable, also setup err = -EBUSY in advance before
isolation, and update err only when successfully queued for migration,
which could help us to unify and simplify code a bit.
Link: https://lkml.kernel.org/r/20230913095131.2426871-9-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There is some different between hugeTLB and THP behave when passed the
address of a tail page, for THP, it will migrate the entire THP page, but
for HugeTLB, it will return -EACCES, or -ENOENT before commit e66f17ff71
("mm/hugetlb: take page table lock in follow_huge_pmd()"),
-EACCES The page is mapped by multiple processes and can be moved
only if MPOL_MF_MOVE_ALL is specified.
-ENOENT The page is not present.
But when check manual[1], both of the two errnos are not suitable, it is
better to keep the same behave between hugetlb and THP when passed the
address of a tail page, so let's just remove the PageHead() check for
HugeTLB.
[1] https://man7.org/linux/man-pages/man2/move_pages.2.html
Link: https://lkml.kernel.org/r/20230913095131.2426871-8-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Suggested-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use a folio in add_page_for_migration() to save compound_head() calls.
Link: https://lkml.kernel.org/r/20230913095131.2426871-7-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use __folio_test_movable(), no need to convert from folio to page again.
Link: https://lkml.kernel.org/r/20230913095131.2426871-6-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
At present, numa balance only support base page and PMD-mapped THP, but we
will expand to support to migrate large folio/pte-mapped THP in the
future, it is better to make migrate_misplaced_page() to take a folio
instead of a page, and rename it to migrate_misplaced_folio(), it is a
preparation, also this remove several compound_head() calls.
Link: https://lkml.kernel.org/r/20230913095131.2426871-5-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Rename numamigrate_isolate_page() to numamigrate_isolate_folio(), then
make it takes a folio and use folio API to save compound_head() calls.
Link: https://lkml.kernel.org/r/20230913095131.2426871-4-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The check of THP mapped by multiple processes was introduced by commit
04fa5d6a65 ("mm: migrate: check page_count of THP before migrating") and
refactor by commit 340ef3902c ("mm: numa: cleanup flow of transhuge page
migration"), which is out of date, since migrate_misplaced_page() is now
using the standard migrate_pages() for small pages and THPs, the reference
count checking is in folio_migrate_mapping(), so let's remove the special
check for THP.
Link: https://lkml.kernel.org/r/20230913095131.2426871-3-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Suggested-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
