solely controlled by the hypervisor
- A build fix to make the function prototype (__warn()) as visible as
the definition itself
- A bunch of objtool annotation fixes which have accumulated over time
- An ORC unwinder fix to handle bad input gracefully
- Well, we thought the microcode gets loaded in time in order to restore
the microcode-emulated MSRs but we thought wrong. So there's a fix for
that to have the ordering done properly
- Add new Intel model numbers
- A spelling fix
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmJucwMACgkQEsHwGGHe
VUpgiw/8CuOXJhHSuYscEfAmPGoiG9+oLTYVc1NEfJEIyNuZULcr+aYlddTF79hm
V+Flq6FyA3NU220F8t5s3jOaDkWjWJ8nZGPUUxo5+yNHugIGYh/kLy6w8LC8SgLq
GqqYX4fd28tqFSgIBCrr+9GgpTE7bvzBGYLByKj9AO6ecLvWJmc+bENQCTaTRFgl
og6xenzyECWxgbWIql0UeB1xw2AJ8UfYVeLKzOHpc95ZF209+mg7JLL5yIxwwgNV
/CGoh28+twjX5SA1rr3cUx9gmFzrYubYZMglhgugBsShkdfuMLhis4woU7lF7cV9
HnxH6mkvN4R0Im7DZXgQPJ63ZFLJ8tN3RyLQDYBRd71w0Epr/K2aacYeQkWTflcx
4Ia+AiJ7rpKx0cUbUHX7pf3lzna/c8u/xPnlAIbR6rfwXO5mACupaofN5atAdx9T
9rPCPIdroM5XzBTiN4aNJHEsADL1h/oQdzrziTwryyezbTtnNC5KW53hnqyf5Bqo
gBlbfVsnwM0AfLHSPE1D0liOR2spwuB+/bWrsOCzEYENC44nDxHE/MUUjg7/l+Vr
6N5syrQ7QsIPqUaEM+bQdKHGaXSU6amF8OWpFMjzkleQw5m7/X8LzyZsBlB4yeqv
63hUEpdmFyR/6bLdEvjUXeAPcbA41WHwOMdNPaKDqn3zhwYZaa4=
=poyP
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v5.18_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- A fix to disable PCI/MSI[-X] masking for XEN_HVM guests as that is
solely controlled by the hypervisor
- A build fix to make the function prototype (__warn()) as visible as
the definition itself
- A bunch of objtool annotation fixes which have accumulated over time
- An ORC unwinder fix to handle bad input gracefully
- Well, we thought the microcode gets loaded in time in order to
restore the microcode-emulated MSRs but we thought wrong. So there's
a fix for that to have the ordering done properly
- Add new Intel model numbers
- A spelling fix
* tag 'x86_urgent_for_v5.18_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/pci/xen: Disable PCI/MSI[-X] masking for XEN_HVM guests
bug: Have __warn() prototype defined unconditionally
x86/Kconfig: fix the spelling of 'becoming' in X86_KERNEL_IBT config
objtool: Use offstr() to print address of missing ENDBR
objtool: Print data address for "!ENDBR" data warnings
x86/xen: Add ANNOTATE_NOENDBR to startup_xen()
x86/uaccess: Add ENDBR to __put_user_nocheck*()
x86/retpoline: Add ANNOTATE_NOENDBR for retpolines
x86/static_call: Add ANNOTATE_NOENDBR to static call trampoline
objtool: Enable unreachable warnings for CLANG LTO
x86,objtool: Explicitly mark idtentry_body()s tail REACHABLE
x86,objtool: Mark cpu_startup_entry() __noreturn
x86,xen,objtool: Add UNWIND hint
lib/strn*,objtool: Enforce user_access_begin() rules
MAINTAINERS: Add x86 unwinding entry
x86/unwind/orc: Recheck address range after stack info was updated
x86/cpu: Load microcode during restore_processor_state()
x86/cpu: Add new Alderlake and Raptorlake CPU model numbers
Occasionally objtool driven code patching (think .static_call_sites
.retpoline_sites etc..) goes sideways and it tries to patch an
instruction that doesn't match.
Much head-scatching and cursing later the problem is as outlined below
and affects every section that objtool generates for us, very much
including the ORC data. The below uses .static_call_sites because it's
convenient for demonstration purposes, but as mentioned the ORC
sections, .retpoline_sites and __mount_loc are all similarly affected.
Consider:
foo-weak.c:
extern void __SCT__foo(void);
__attribute__((weak)) void foo(void)
{
return __SCT__foo();
}
foo.c:
extern void __SCT__foo(void);
extern void my_foo(void);
void foo(void)
{
my_foo();
return __SCT__foo();
}
These generate the obvious code
(gcc -O2 -fcf-protection=none -fno-asynchronous-unwind-tables -c foo*.c):
foo-weak.o:
0000000000000000 <foo>:
0: e9 00 00 00 00 jmpq 5 <foo+0x5> 1: R_X86_64_PLT32 __SCT__foo-0x4
foo.o:
0000000000000000 <foo>:
0: 48 83 ec 08 sub $0x8,%rsp
4: e8 00 00 00 00 callq 9 <foo+0x9> 5: R_X86_64_PLT32 my_foo-0x4
9: 48 83 c4 08 add $0x8,%rsp
d: e9 00 00 00 00 jmpq 12 <foo+0x12> e: R_X86_64_PLT32 __SCT__foo-0x4
Now, when we link these two files together, you get something like
(ld -r -o foos.o foo-weak.o foo.o):
foos.o:
0000000000000000 <foo-0x10>:
0: e9 00 00 00 00 jmpq 5 <foo-0xb> 1: R_X86_64_PLT32 __SCT__foo-0x4
5: 66 2e 0f 1f 84 00 00 00 00 00 nopw %cs:0x0(%rax,%rax,1)
f: 90 nop
0000000000000010 <foo>:
10: 48 83 ec 08 sub $0x8,%rsp
14: e8 00 00 00 00 callq 19 <foo+0x9> 15: R_X86_64_PLT32 my_foo-0x4
19: 48 83 c4 08 add $0x8,%rsp
1d: e9 00 00 00 00 jmpq 22 <foo+0x12> 1e: R_X86_64_PLT32 __SCT__foo-0x4
Noting that ld preserves the weak function text, but strips the symbol
off of it (hence objdump doing that funny negative offset thing). This
does lead to 'interesting' unused code issues with objtool when ran on
linked objects, but that seems to be working (fingers crossed).
So far so good.. Now lets consider the objtool static_call output
section (readelf output, old binutils):
foo-weak.o:
Relocation section '.rela.static_call_sites' at offset 0x2c8 contains 1 entry:
Offset Info Type Symbol's Value Symbol's Name + Addend
0000000000000000 0000000200000002 R_X86_64_PC32 0000000000000000 .text + 0
0000000000000004 0000000d00000002 R_X86_64_PC32 0000000000000000 __SCT__foo + 1
foo.o:
Relocation section '.rela.static_call_sites' at offset 0x310 contains 2 entries:
Offset Info Type Symbol's Value Symbol's Name + Addend
0000000000000000 0000000200000002 R_X86_64_PC32 0000000000000000 .text + d
0000000000000004 0000000d00000002 R_X86_64_PC32 0000000000000000 __SCT__foo + 1
foos.o:
Relocation section '.rela.static_call_sites' at offset 0x430 contains 4 entries:
Offset Info Type Symbol's Value Symbol's Name + Addend
0000000000000000 0000000100000002 R_X86_64_PC32 0000000000000000 .text + 0
0000000000000004 0000000d00000002 R_X86_64_PC32 0000000000000000 __SCT__foo + 1
0000000000000008 0000000100000002 R_X86_64_PC32 0000000000000000 .text + 1d
000000000000000c 0000000d00000002 R_X86_64_PC32 0000000000000000 __SCT__foo + 1
So we have two patch sites, one in the dead code of the weak foo and one
in the real foo. All is well.
*HOWEVER*, when the toolchain strips unused section symbols it
generates things like this (using new enough binutils):
foo-weak.o:
Relocation section '.rela.static_call_sites' at offset 0x2c8 contains 1 entry:
Offset Info Type Symbol's Value Symbol's Name + Addend
0000000000000000 0000000200000002 R_X86_64_PC32 0000000000000000 foo + 0
0000000000000004 0000000d00000002 R_X86_64_PC32 0000000000000000 __SCT__foo + 1
foo.o:
Relocation section '.rela.static_call_sites' at offset 0x310 contains 2 entries:
Offset Info Type Symbol's Value Symbol's Name + Addend
0000000000000000 0000000200000002 R_X86_64_PC32 0000000000000000 foo + d
0000000000000004 0000000d00000002 R_X86_64_PC32 0000000000000000 __SCT__foo + 1
foos.o:
Relocation section '.rela.static_call_sites' at offset 0x430 contains 4 entries:
Offset Info Type Symbol's Value Symbol's Name + Addend
0000000000000000 0000000100000002 R_X86_64_PC32 0000000000000000 foo + 0
0000000000000004 0000000d00000002 R_X86_64_PC32 0000000000000000 __SCT__foo + 1
0000000000000008 0000000100000002 R_X86_64_PC32 0000000000000000 foo + d
000000000000000c 0000000d00000002 R_X86_64_PC32 0000000000000000 __SCT__foo + 1
And now we can see how that foos.o .static_call_sites goes side-ways, we
now have _two_ patch sites in foo. One for the weak symbol at foo+0
(which is no longer a static_call site!) and one at foo+d which is in
fact the right location.
This seems to happen when objtool cannot find a section symbol, in which
case it falls back to any other symbol to key off of, however in this
case that goes terribly wrong!
As such, teach objtool to create a section symbol when there isn't
one.
Fixes: 44f6a7c075 ("objtool: Fix seg fault with Clang non-section symbols")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20220419203807.655552918@infradead.org
Objtool's function fallthrough detection only works on C objects.
The distinction between C and assembly objects no longer makes sense
with objtool running on vmlinux.o.
Now that copy_user_64.S has been fixed up, and an objtool sibling call
detection bug has been fixed, the asm code is in "compliance" and this
hack is no longer needed. Remove it.
Fixes: ed53a0d971 ("x86/alternative: Use .ibt_endbr_seal to seal indirect calls")
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/b434cff98eca3a60dcc64c620d7d5d405a0f441c.1649718562.git.jpoimboe@redhat.com
In add_jump_destinations(), sibling call detection requires 'insn->func'
to be valid. But alternative instructions get their 'func' set in
handle_group_alt(), which runs *after* add_jump_destinations(). So
sibling calls in alternatives code don't get properly detected.
Fix that by changing the initialization order: call
add_special_section_alts() *before* add_jump_destinations().
This also means the special case for a missing 'jump_dest' in
add_jump_destinations() can be removed, as it has already been dealt
with.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/c02e0a0a2a4286b5f848d17c77fdcb7e0caf709c.1649718562.git.jpoimboe@redhat.com
For most sibling calls, 'jump_dest' is NULL because objtool treats the
jump like a call and sets 'call_dest'. But there are a few edge cases
where that's not true. Make it consistent to avoid unexpected behavior.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/8737d6b9d1691831aed73375f444f0f42da3e2c9.1649718562.git.jpoimboe@redhat.com
When a "!ENDBR" warning is reported for a data section, objtool just
prints the text address of the relocation target twice, without giving
any clues about the location of the original data reference:
vmlinux.o: warning: objtool: dcbnl_netdevice_event()+0x0: .text+0xb64680: data relocation to !ENDBR: dcbnl_netdevice_event+0x0
Instead, print the address of the data reference, in addition to the
address of the relocation target.
vmlinux.o: warning: objtool: dcbnl_nb+0x0: .data..read_mostly+0xe260: data relocation to !ENDBR: dcbnl_netdevice_event+0x0
Fixes: 89bc853eae ("objtool: Find unused ENDBR instructions")
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/762e88d51300e8eaf0f933a5b0feae20ac033bea.1650300597.git.jpoimboe@redhat.com
GCC-8 isn't clever enough to figure out that cpu_start_entry() is a
noreturn while objtool is. This results in code after the call in
start_secondary(). Give GCC a hand so that they all agree on things.
vmlinux.o: warning: objtool: start_secondary()+0x10e: unreachable
Reported-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220408094718.383658532@infradead.org
Since not all compilers have a function attribute to disable KCOV
instrumentation, objtool can rewrite KCOV instrumentation in noinstr
functions as per commit:
f56dae88a8 ("objtool: Handle __sanitize_cov*() tail calls")
However, this has subtle interaction with the SLS validation from
commit:
1cc1e4c8aa ("objtool: Add straight-line-speculation validation")
In that when a tail-call instrucion is replaced with a RET an
additional INT3 instruction is also written, but is not represented in
the decoded instruction stream.
This then leads to false positive missing INT3 objtool warnings in
noinstr code.
Instead of adding additional struct instruction objects, mark the RET
instruction with retpoline_safe to suppress the warning (since we know
there really is an INT3).
Fixes: 1cc1e4c8aa ("objtool: Add straight-line-speculation validation")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220323230712.GA8939@worktop.programming.kicks-ass.net
Objtool reports:
arch/x86/crypto/poly1305-x86_64.o: warning: objtool: poly1305_blocks_avx() falls through to next function poly1305_blocks_x86_64()
arch/x86/crypto/poly1305-x86_64.o: warning: objtool: poly1305_emit_avx() falls through to next function poly1305_emit_x86_64()
arch/x86/crypto/poly1305-x86_64.o: warning: objtool: poly1305_blocks_avx2() falls through to next function poly1305_blocks_x86_64()
Which reads like:
0000000000000040 <poly1305_blocks_x86_64>:
40: f3 0f 1e fa endbr64
...
0000000000000400 <poly1305_blocks_avx>:
400: f3 0f 1e fa endbr64
404: 44 8b 47 14 mov 0x14(%rdi),%r8d
408: 48 81 fa 80 00 00 00 cmp $0x80,%rdx
40f: 73 09 jae 41a <poly1305_blocks_avx+0x1a>
411: 45 85 c0 test %r8d,%r8d
414: 0f 84 2a fc ff ff je 44 <poly1305_blocks_x86_64+0x4>
...
These are simple conditional tail-calls and *should* be recognised as
such by objtool, however due to a mistake in commit 08f87a93c8
("objtool: Validate IBT assumptions") this is failing.
Specifically, the jump_dest is +4, this means the instruction pointed
at will not be ENDBR and as such it will fail the second clause of
is_first_func_insn() that was supposed to capture this exact case.
Instead, have is_first_func_insn() look at the previous instruction.
Fixes: 08f87a93c8 ("objtool: Validate IBT assumptions")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220322115125.811582125@infradead.org
- Add new environment variables, USERCFLAGS and USERLDFLAGS to allow
additional flags to be passed to user-space programs.
- Fix missing fflush() bugs in Kconfig and fixdep
- Fix a minor bug in the comment format of the .config file
- Make kallsyms ignore llvm's local labels, .L*
- Fix UAPI compile-test for cross-compiling with Clang
- Extend the LLVM= syntax to support LLVM=<suffix> form for using a
particular version of LLVm, and LLVM=<prefix> form for using custom
LLVM in a particular directory path.
- Clean up Makefiles
-----BEGIN PGP SIGNATURE-----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=84rW
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add new environment variables, USERCFLAGS and USERLDFLAGS to allow
additional flags to be passed to user-space programs.
- Fix missing fflush() bugs in Kconfig and fixdep
- Fix a minor bug in the comment format of the .config file
- Make kallsyms ignore llvm's local labels, .L*
- Fix UAPI compile-test for cross-compiling with Clang
- Extend the LLVM= syntax to support LLVM=<suffix> form for using a
particular version of LLVm, and LLVM=<prefix> form for using custom
LLVM in a particular directory path.
- Clean up Makefiles
* tag 'kbuild-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Make $(LLVM) more flexible
kbuild: add --target to correctly cross-compile UAPI headers with Clang
fixdep: use fflush() and ferror() to ensure successful write to files
arch: syscalls: simplify uapi/kapi directory creation
usr/include: replace extra-y with always-y
certs: simplify empty certs creation in certs/Makefile
certs: include certs/signing_key.x509 unconditionally
kallsyms: ignore all local labels prefixed by '.L'
kconfig: fix missing '# end of' for empty menu
kconfig: add fflush() before ferror() check
kbuild: replace $(if A,A,B) with $(or A,B)
kbuild: Add environment variables for userprogs flags
kbuild: unify cmd_copy and cmd_shipped
Find all ENDBR instructions which are never referenced and stick them
in a section such that the kernel can poison them, sealing the
functions from ever being an indirect call target.
This removes about 1-in-4 ENDBR instructions.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154319.763643193@infradead.org
Intel IBT requires that every indirect JMP/CALL targets an ENDBR
instructions, failing this #CP happens and we die. Similarly, all
exception entries should be ENDBR.
Find all code relocations and ensure they're either an ENDBR
instruction or ANNOTATE_NOENDBR. For the exceptions look for
UNWIND_HINT_IRET_REGS at sym+0 not being ENDBR.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154319.705110141@infradead.org
Intel IBT requires the target of any indirect CALL or JMP instruction
to be the ENDBR instruction; optionally it allows those two
instructions to have a NOTRACK prefix in order to avoid this
requirement.
The kernel will not enable the use of NOTRACK, as such any occurence
of it in compiler generated code should be flagged.
Teach objtool to Decode ENDBR instructions and WARN about NOTRACK
prefixes.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154319.645963517@infradead.org
Read the new NOENDBR annotation. While there, attempt to not bloat
struct instruction.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154319.586815435@infradead.org
Currently ASM_REACHABLE only works for UD2 instructions; reorder
things to also allow over-riding dead_end_function().
To that end:
- Mark INSN_BUG instructions in decode_instructions(), this saves
having to iterate all instructions yet again.
- Have add_call_destinations() set insn->dead_end for
dead_end_function() calls.
- Move add_dead_ends() *after* add_call_destinations() such that
ASM_REACHABLE can clear the ->dead_end mark.
- have validate_branch() only check ->dead_end.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154319.410010807@infradead.org
There's a fun implementation detail on linking STB_WEAK symbols. When
the linker combines two translation units, where one contains a weak
function and the other an override for it. It simply strips the
STB_WEAK symbol from the symbol table, but doesn't actually remove the
code.
The result is that when objtool is ran in a whole-archive kind of way,
it will encounter *heaps* of unused (and unreferenced) code. All
rudiments of weak functions.
Additionally, when a weak implementation is split into a .cold
subfunction that .cold symbol is left in place, even though completely
unused.
Teach objtool to ignore such rudiments by searching for symbol holes;
that is, code ranges that fall outside the given symbol bounds.
Specifically, ignore a sequence of unreachable instruction iff they
occupy a single hole, additionally ignore any .cold subfunctions
referenced.
Both ld.bfd and ld.lld behave like this. LTO builds otoh can (and do)
properly DCE weak functions.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154319.232019347@infradead.org
In order to prepare for LTO like objtool runs for modules, rename the
duplicate argument to lto.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154319.172584233@infradead.org
Currently WARN_FUNC() either prints func+off and failing that prints
sec+off, add an intermediate sym+off. This is useful when playing
around with entry code.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154317.461283840@infradead.org
Ignore all INT3 instructions for unreachable code warnings, similar to NOP.
This allows using INT3 for various paddings instead of NOPs.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154317.343312938@infradead.org
Add a --dry-run argument to skip writing the modifications. This is
convenient for debugging.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154317.282720146@infradead.org
The ENQCMD instruction implicitly accesses the PASID_MSR to fill in the
pasid field of the descriptor being submitted to an accelerator. But
there is no precise (and stable across kernel changes) point at which
the PASID_MSR is updated from the value for one task to the next.
Kernel code that uses accelerators must always use the ENQCMDS instruction
which does not access the PASID_MSR.
Check for use of the ENQCMD instruction in the kernel and warn on its
usage.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220207230254.3342514-11-fenghua.yu@intel.com
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
$(or ...) is available since GNU Make 3.81, and useful to shorten the
code in some places.
Covert as follows:
$(if A,A,B) --> $(or A,B)
This patch also converts:
$(if A, A, B) --> $(or A, B)
Strictly speaking, the latter is not an equivalent conversion because
GNU Make keeps spaces after commas; if A is not empty, $(if A, A, B)
expands to " A", while $(or A, B) expands to "A".
Anyway, preceding spaces are not significant in the code hunks I touched.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
On GCC 12, the build fails due to a possible truncated string:
check.c: In function 'validate_call':
check.c:2865:58: error: '%d' directive output may be truncated writing between 1 and 10 bytes into a region of size 9 [-Werror=format-truncation=]
2865 | snprintf(pvname, sizeof(pvname), "pv_ops[%d]", idx);
| ^~
In theory it's a valid bug:
static char pvname[16];
int idx;
...
idx = (rel->addend / sizeof(void *));
snprintf(pvname, sizeof(pvname), "pv_ops[%d]", idx);
There are only 7 chars for %d while it could take up to 9, so the
printed "pv_ops[%d]" string could get truncated.
In reality the bug should never happen, because pv_ops only has ~80
entries, so 7 chars for the integer is more than enough. Still, it's
worth fixing. Bump the buffer size by 2 bytes to silence the warning.
[ jpoimboe: changed size to 19; massaged changelog ]
Fixes: db2b0c5d7b ("objtool: Support pv_opsindirect calls for noinstr")
Reported-by: Adam Borowski <kilobyte@angband.pl>
Reported-by: Martin Liška <mliska@suse.cz>
Signed-off-by: Sergei Trofimovich <slyich@gmail.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220120233748.2062559-1-slyich@gmail.com
Pull signal/exit/ptrace updates from Eric Biederman:
"This set of changes deletes some dead code, makes a lot of cleanups
which hopefully make the code easier to follow, and fixes bugs found
along the way.
The end-game which I have not yet reached yet is for fatal signals
that generate coredumps to be short-circuit deliverable from
complete_signal, for force_siginfo_to_task not to require changing
userspace configured signal delivery state, and for the ptrace stops
to always happen in locations where we can guarantee on all
architectures that the all of the registers are saved and available on
the stack.
Removal of profile_task_ext, profile_munmap, and profile_handoff_task
are the big successes for dead code removal this round.
A bunch of small bug fixes are included, as most of the issues
reported were small enough that they would not affect bisection so I
simply added the fixes and did not fold the fixes into the changes
they were fixing.
There was a bug that broke coredumps piped to systemd-coredump. I
dropped the change that caused that bug and replaced it entirely with
something much more restrained. Unfortunately that required some
rebasing.
Some successes after this set of changes: There are few enough calls
to do_exit to audit in a reasonable amount of time. The lifetime of
struct kthread now matches the lifetime of struct task, and the
pointer to struct kthread is no longer stored in set_child_tid. The
flag SIGNAL_GROUP_COREDUMP is removed. The field group_exit_task is
removed. Issues where task->exit_code was examined with
signal->group_exit_code should been examined were fixed.
There are several loosely related changes included because I am
cleaning up and if I don't include them they will probably get lost.
The original postings of these changes can be found at:
https://lkml.kernel.org/r/87a6ha4zsd.fsf@email.froward.int.ebiederm.orghttps://lkml.kernel.org/r/87bl1kunjj.fsf@email.froward.int.ebiederm.orghttps://lkml.kernel.org/r/87r19opkx1.fsf_-_@email.froward.int.ebiederm.org
I trimmed back the last set of changes to only the obviously correct
once. Simply because there was less time for review than I had hoped"
* 'signal-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (44 commits)
ptrace/m68k: Stop open coding ptrace_report_syscall
ptrace: Remove unused regs argument from ptrace_report_syscall
ptrace: Remove second setting of PT_SEIZED in ptrace_attach
taskstats: Cleanup the use of task->exit_code
exit: Use the correct exit_code in /proc/<pid>/stat
exit: Fix the exit_code for wait_task_zombie
exit: Coredumps reach do_group_exit
exit: Remove profile_handoff_task
exit: Remove profile_task_exit & profile_munmap
signal: clean up kernel-doc comments
signal: Remove the helper signal_group_exit
signal: Rename group_exit_task group_exec_task
coredump: Stop setting signal->group_exit_task
signal: Remove SIGNAL_GROUP_COREDUMP
signal: During coredumps set SIGNAL_GROUP_EXIT in zap_process
signal: Make coredump handling explicit in complete_signal
signal: Have prepare_signal detect coredumps using signal->core_state
signal: Have the oom killer detect coredumps using signal->core_state
exit: Move force_uaccess back into do_exit
exit: Guarantee make_task_dead leaks the tsk when calling do_task_exit
...
misleading/wrong stacktraces and confuse RELIABLE_STACKTRACE and
LIVEPATCH as the backtrace misses the function which is being fixed up.
- Add Straight Light Speculation mitigation support which uses a new
compiler switch -mharden-sls= which sticks an INT3 after a RET or an
indirect branch in order to block speculation after them. Reportedly,
CPUs do speculate behind such insns.
- The usual set of cleanups and improvements
-----BEGIN PGP SIGNATURE-----
iQIyBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmHfKA0ACgkQEsHwGGHe
VUqLJg/2I2X2xXr5filJVaK+sQgmvDzk67DKnbxRBW2xcPF+B5sSW5yhe3G5UPW7
SJVdhQ3gHcTiliGGlBf/VE7KXbqxFN0vO4/VFHZm78r43g7OrXTxz6WXXQRJ1n67
U3YwRH3b6cqXZNFMs+X4bJt6qsGJM1kdTTZ2as4aERnaFr5AOAfQvfKbyhxLe/XA
3SakfYISVKCBQ2RkTfpMpwmqlsatGFhTC5IrvuDQ83dDsM7O+Dx1J6Gu3fwjKmie
iVzPOjCh+xTpZQp/SIZmt7MzoduZvpSym4YVyHvEnMiexQT4AmyaRthWqrhnEXY/
qOvj8/XIqxmix8EaooGqRIK0Y2ZegxkPckNFzaeC3lsWohwMIGIhNXwHNEeuhNyH
yvNGAW9Cq6NeDRgz5MRUXcimYw4P4oQKYLObS1WqFZhNMqm4sNtoEAYpai/lPYfs
zUDckgXF2AoPOsSqy3hFAVaGovAgzfDaJVzkt0Lk4kzzjX2WQiNLhmiior460w+K
0l2Iej58IajSp3MkWmFH368Jo8YfUVmkjbbpsmjsBppA08e1xamJB7RmswI/Ezj6
s5re6UioCD+UYdjWx41kgbvYdvIkkZ2RLrktoZd/hqHrOLWEIiwEbyFO2nRFJIAh
YjvPkB1p7iNuAeYcP1x9Ft9GNYVIsUlJ+hK86wtFCqy+abV+zQ==
=R52z
-----END PGP SIGNATURE-----
Merge tag 'x86_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 core updates from Borislav Petkov:
- Get rid of all the .fixup sections because this generates
misleading/wrong stacktraces and confuse RELIABLE_STACKTRACE and
LIVEPATCH as the backtrace misses the function which is being fixed
up.
- Add Straight Line Speculation mitigation support which uses a new
compiler switch -mharden-sls= which sticks an INT3 after a RET or an
indirect branch in order to block speculation after them. Reportedly,
CPUs do speculate behind such insns.
- The usual set of cleanups and improvements
* tag 'x86_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
x86/entry_32: Fix segment exceptions
objtool: Remove .fixup handling
x86: Remove .fixup section
x86/word-at-a-time: Remove .fixup usage
x86/usercopy: Remove .fixup usage
x86/usercopy_32: Simplify __copy_user_intel_nocache()
x86/sgx: Remove .fixup usage
x86/checksum_32: Remove .fixup usage
x86/vmx: Remove .fixup usage
x86/kvm: Remove .fixup usage
x86/segment: Remove .fixup usage
x86/fpu: Remove .fixup usage
x86/xen: Remove .fixup usage
x86/uaccess: Remove .fixup usage
x86/futex: Remove .fixup usage
x86/msr: Remove .fixup usage
x86/extable: Extend extable functionality
x86/entry_32: Remove .fixup usage
x86/entry_64: Remove .fixup usage
x86/copy_mc_64: Remove .fixup usage
...
This series provides KCSAN fixes and also the ability to take memory
barriers into account for weakly-ordered systems. This last can increase
the probability of detecting certain types of data races.
-----BEGIN PGP SIGNATURE-----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=Q5fg
-----END PGP SIGNATURE-----
Merge tag 'kcsan.2022.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull KCSAN updates from Paul McKenney:
"This provides KCSAN fixes and also the ability to take memory barriers
into account for weakly-ordered systems. This last can increase the
probability of detecting certain types of data races"
* tag 'kcsan.2022.01.09a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (29 commits)
kcsan: Only test clear_bit_unlock_is_negative_byte if arch defines it
kcsan: Avoid nested contexts reading inconsistent reorder_access
kcsan: Turn barrier instrumentation into macros
kcsan: Make barrier tests compatible with lockdep
kcsan: Support WEAK_MEMORY with Clang where no objtool support exists
compiler_attributes.h: Add __disable_sanitizer_instrumentation
objtool, kcsan: Remove memory barrier instrumentation from noinstr
objtool, kcsan: Add memory barrier instrumentation to whitelist
sched, kcsan: Enable memory barrier instrumentation
mm, kcsan: Enable barrier instrumentation
x86/qspinlock, kcsan: Instrument barrier of pv_queued_spin_unlock()
x86/barriers, kcsan: Use generic instrumentation for non-smp barriers
asm-generic/bitops, kcsan: Add instrumentation for barriers
locking/atomics, kcsan: Add instrumentation for barriers
locking/barriers, kcsan: Support generic instrumentation
locking/barriers, kcsan: Add instrumentation for barriers
kcsan: selftest: Add test case to check memory barrier instrumentation
kcsan: Ignore GCC 11+ warnings about TSan runtime support
kcsan: test: Add test cases for memory barrier instrumentation
kcsan: test: Match reordered or normal accesses
...
Recently the kbuild robot reported two new errors:
>> lib/kunit/kunit-example-test.o: warning: objtool: .text.unlikely: unexpected end of section
>> arch/x86/kernel/dumpstack.o: warning: objtool: oops_end() falls through to next function show_opcodes()
I don't know why they did not occur in my test setup but after digging
it I realized I had accidentally dropped a comma in
tools/objtool/check.c when I renamed rewind_stack_do_exit to
rewind_stack_and_make_dead.
Add that comma back to fix objtool errors.
Link: https://lkml.kernel.org/r/202112140949.Uq5sFKR1-lkp@intel.com
Fixes: 0e25498f8c ("exit: Add and use make_task_dead.")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Update complete_and_exit to call kthread_exit instead of do_exit.
Change the name to reflect this change in functionality. All of the
users of complete_and_exit are causing the current kthread to exit so
this change makes it clear what is happening.
Move the implementation of kthread_complete_and_exit from
kernel/exit.c to to kernel/kthread.c. As this function is kthread
specific it makes most sense to live with the kthread functions.
There are no functional change.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Update module_put_and_exit to call kthread_exit instead of do_exit.
Change the name to reflect this change in functionality. All of the
users of module_put_and_exit are causing the current kthread to exit
so this change makes it clear what is happening. There is no
functional change.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
The way the per task_struct exit_code is used by kernel threads is not
quite compatible how it is used by userspace applications. The low
byte of the userspace exit_code value encodes the exit signal. While
kthreads just use the value as an int holding ordinary kernel function
exit status like -EPERM.
Add kthread_exit to clearly separate the two kinds of uses.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
There are two big uses of do_exit. The first is it's design use to be
the guts of the exit(2) system call. The second use is to terminate
a task after something catastrophic has happened like a NULL pointer
in kernel code.
Add a function make_task_dead that is initialy exactly the same as
do_exit to cover the cases where do_exit is called to handle
catastrophic failure. In time this can probably be reduced to just a
light wrapper around do_task_dead. For now keep it exactly the same so
that there will be no behavioral differences introducing this new
concept.
Replace all of the uses of do_exit that use it for catastraphic
task cleanup with make_task_dead to make it clear what the code
is doing.
As part of this rename rewind_stack_do_exit
rewind_stack_and_make_dead.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Teach objtool to turn instrumentation required for memory barrier
modeling into nops in noinstr text.
The __tsan_func_entry/exit calls are still emitted by compilers even
with the __no_sanitize_thread attribute. The memory barrier
instrumentation will be inserted explicitly (without compiler help), and
thus needs to also explicitly be removed.
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Adds KCSAN's memory barrier instrumentation to objtool's uaccess
whitelist.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Teach objtool to validate the straight-line-speculation constraints:
- speculation trap after indirect calls
- speculation trap after RET
Notable: when an instruction is annotated RETPOLINE_SAFE, indicating
speculation isn't a problem, also don't care about sls for that
instruction.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211204134908.023037659@infradead.org
Boris reported that in one of his randconfig builds, objtool got
infinitely stuck. Turns out there's trivial list corruption in the
pv_ops tracking when a function is both in a static table and in a code
assignment.
Avoid re-adding function to the pv_ops[] lists when they're already on
it.
Fixes: db2b0c5d7b ("objtool: Support pv_opsindirect calls for noinstr")
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Borislav Petkov <bp@alien8.de>
Link: https://lkml.kernel.org/r/20211202204534.GA16608@worktop.programming.kicks-ass.net
Add a few signature bytes after the static call trampoline and verify
those bytes match before patching the trampoline. This avoids patching
random other JMPs (such as CFI jump-table entries) instead.
These bytes decode as:
d: 53 push %rbx
e: 43 54 rex.XB push %r12
And happen to spell "SCT".
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211030074758.GT174703@worktop.programming.kicks-ass.net
- kprobes: Restructured stack unwinder to show properly on x86 when a stack
dump happens from a kretprobe callback.
- Fix to bootconfig parsing
- Have tracefs allow owner and group permissions by default (only denying
others). There's been pressure to allow non root to tracefs in a
controlled fashion, and using groups is probably the safest.
- Bootconfig memory managament updates.
- Bootconfig clean up to have the tools directory be less dependent on
changes in the kernel tree.
- Allow perf to be traced by function tracer.
- Rewrite of function graph tracer to be a callback from the function tracer
instead of having its own trampoline (this change will happen on an arch
by arch basis, and currently only x86_64 implements it).
- Allow multiple direct trampolines (bpf hooks to functions) be batched
together in one synchronization.
- Allow histogram triggers to add variables that can perform calculations
against the event's fields.
- Use the linker to determine architecture callbacks from the ftrace
trampoline to allow for proper parameter prototypes and prevent warnings
from the compiler.
- Extend histogram triggers to key off of variables.
- Have trace recursion use bit magic to determine preempt context over if
branches.
- Have trace recursion disable preemption as all use cases do anyway.
- Added testing for verification of tracing utilities.
- Various small clean ups and fixes.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYYBdxhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qp1sAQD2oYFwaG3sx872gj/myBcHIBSKdiki
Hry5csd8zYDBpgD+Poylopt5JIbeDuoYw/BedgEXmscZ8Qr7VzjAXdnv/Q4=
=Loz8
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
- kprobes: Restructured stack unwinder to show properly on x86 when a
stack dump happens from a kretprobe callback.
- Fix to bootconfig parsing
- Have tracefs allow owner and group permissions by default (only
denying others). There's been pressure to allow non root to tracefs
in a controlled fashion, and using groups is probably the safest.
- Bootconfig memory managament updates.
- Bootconfig clean up to have the tools directory be less dependent on
changes in the kernel tree.
- Allow perf to be traced by function tracer.
- Rewrite of function graph tracer to be a callback from the function
tracer instead of having its own trampoline (this change will happen
on an arch by arch basis, and currently only x86_64 implements it).
- Allow multiple direct trampolines (bpf hooks to functions) be batched
together in one synchronization.
- Allow histogram triggers to add variables that can perform
calculations against the event's fields.
- Use the linker to determine architecture callbacks from the ftrace
trampoline to allow for proper parameter prototypes and prevent
warnings from the compiler.
- Extend histogram triggers to key off of variables.
- Have trace recursion use bit magic to determine preempt context over
if branches.
- Have trace recursion disable preemption as all use cases do anyway.
- Added testing for verification of tracing utilities.
- Various small clean ups and fixes.
* tag 'trace-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (101 commits)
tracing/histogram: Fix semicolon.cocci warnings
tracing/histogram: Fix documentation inline emphasis warning
tracing: Increase PERF_MAX_TRACE_SIZE to handle Sentinel1 and docker together
tracing: Show size of requested perf buffer
bootconfig: Initialize ret in xbc_parse_tree()
ftrace: do CPU checking after preemption disabled
ftrace: disable preemption when recursion locked
tracing/histogram: Document expression arithmetic and constants
tracing/histogram: Optimize division by a power of 2
tracing/histogram: Covert expr to const if both operands are constants
tracing/histogram: Simplify handling of .sym-offset in expressions
tracing: Fix operator precedence for hist triggers expression
tracing: Add division and multiplication support for hist triggers
tracing: Add support for creating hist trigger variables from literal
selftests/ftrace: Stop tracing while reading the trace file by default
MAINTAINERS: Update KPROBES and TRACING entries
test_kprobes: Move it from kernel/ to lib/
docs, kprobes: Remove invalid URL and add new reference
samples/kretprobes: Fix return value if register_kretprobe() failed
lib/bootconfig: Fix the xbc_get_info kerneldoc
...
- Improve retpoline code patching by separating it from alternatives which
reduces memory footprint and allows to do better optimizations in the
actual runtime patching.
- Add proper retpoline support for x86/BPF
- Address noinstr warnings in x86/kvm, lockdep and paravirtualization code
- Add support to handle pv_opsindirect calls in the noinstr analysis
- Classify symbols upfront and cache the result to avoid redundant
str*cmp() invocations.
- Add a CFI hash to reduce memory consumption which also reduces runtime
on a allyesconfig by ~50%
- Adjust XEN code to make objtool handling more robust and as a side
effect to prevent text fragmentation due to placement of the hypercall
page.
-----BEGIN PGP SIGNATURE-----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=pfZi
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Thomas Gleixner:
- Improve retpoline code patching by separating it from alternatives
which reduces memory footprint and allows to do better optimizations
in the actual runtime patching.
- Add proper retpoline support for x86/BPF
- Address noinstr warnings in x86/kvm, lockdep and paravirtualization
code
- Add support to handle pv_opsindirect calls in the noinstr analysis
- Classify symbols upfront and cache the result to avoid redundant
str*cmp() invocations.
- Add a CFI hash to reduce memory consumption which also reduces
runtime on a allyesconfig by ~50%
- Adjust XEN code to make objtool handling more robust and as a side
effect to prevent text fragmentation due to placement of the
hypercall page.
* tag 'objtool-core-2021-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
bpf,x86: Respect X86_FEATURE_RETPOLINE*
bpf,x86: Simplify computing label offsets
x86,bugs: Unconditionally allow spectre_v2=retpoline,amd
x86/alternative: Add debug prints to apply_retpolines()
x86/alternative: Try inline spectre_v2=retpoline,amd
x86/alternative: Handle Jcc __x86_indirect_thunk_\reg
x86/alternative: Implement .retpoline_sites support
x86/retpoline: Create a retpoline thunk array
x86/retpoline: Move the retpoline thunk declarations to nospec-branch.h
x86/asm: Fixup odd GEN-for-each-reg.h usage
x86/asm: Fix register order
x86/retpoline: Remove unused replacement symbols
objtool,x86: Replace alternatives with .retpoline_sites
objtool: Shrink struct instruction
objtool: Explicitly avoid self modifying code in .altinstr_replacement
objtool: Classify symbols
objtool: Support pv_opsindirect calls for noinstr
x86/xen: Rework the xen_{cpu,irq,mmu}_opsarrays
x86/xen: Mark xen_force_evtchn_callback() noinstr
x86/xen: Make irq_disable() noinstr
...
Instead of writing complete alternatives, simply provide a list of all
the retpoline thunk calls. Then the kernel is free to do with them as
it pleases. Simpler code all-round.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/r/20211026120309.850007165@infradead.org
Any one instruction can only ever call a single function, therefore
insn->mcount_loc_node is superfluous and can use insn->call_node.
This shrinks struct instruction, which is by far the most numerous
structure objtool creates.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/r/20211026120309.785456706@infradead.org
Assume ALTERNATIVE()s know what they're doing and do not change, or
cause to change, instructions in .altinstr_replacement sections.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/r/20211026120309.722511775@infradead.org
In order to avoid calling str*cmp() on symbol names, over and over, do
them all once upfront and store the result.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/r/20211026120309.658539311@infradead.org
The libelf implementation from elftoolchain has a safety check in
gelf_update_rel[a] to check that the data corresponds to a section
that has type SHT_REL[A] [0]. If the relocation is updated before
the section header is updated with the proper type, this check
fails.
To fix this, update the section header first, before the relocations.
Previously, the section size was calculated in elf_rebuild_reloc_section
by counting the number of entries in the reloc_list. However, we
now need the size during elf_write so instead keep a running total
and add to it for every new relocation.
[0] https://sourceforge.net/p/elftoolchain/mailman/elftoolchain-developers/thread/CAGw6cBtkZro-8wZMD2ULkwJ39J+tHtTtAWXufMjnd3cQ7XG54g@mail.gmail.com/
Signed-off-by: Michael Forney <mforney@mforney.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20210509000103.11008-2-mforney@mforney.org
Otherwise, if these fail we end up with garbage data in the
.rela.orc_unwind_ip section, leading to errors like
ld: fs/squashfs/namei.o: bad reloc symbol index (0x7f16 >= 0x12) for offset 0x7f16d5c82cc8 in section `.orc_unwind_ip'
Signed-off-by: Michael Forney <mforney@mforney.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20210509000103.11008-1-mforney@mforney.org
