The pt passed into handle_removed_tdp_mmu_page does not need RCU
protection, as it is not at any risk of being freed by another thread at
that point. However, the implicit cast from tdp_sptep_t to u64 * dropped
the __rcu annotation without a proper rcu_derefrence. Fix this by
passing the pt as a tdp_ptep_t and then rcu_dereferencing it in
the function.
Suggested-by: Sean Christopherson <seanjc@google.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210315233803.2706477-2-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With commit 1e30f642cf ("ASoC: simple-card-utils: Fix device module clock")
simple-card-utils can control MCLK clock for rate updates or enable/disable.
But this is breaking some platforms where it is expected that codec drivers
would actually handle the MCLK clock. One such example is following platform.
- "arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts"
In above case codec, wm8904, is using internal PLL and configures sysclk
based on fixed MCLK input. In such cases it is expected that, required PLL
output or sysclk, is just passed via set_sysclk() callback and card driver
need not actually update MCLK rate. Instead, codec can take ownership of
this clock and do the necessary configuration.
So the original commit is reverted and codec driver for rt5659 is updated
to fix my board which has this codec.
Sameer Pujar (2):
ASoC: simple-card-utils: Do not handle device clock
ASoC: rt5659: Update MCLK rate in set_sysclk()
sound/soc/codecs/rt5659.c | 5 +++++
sound/soc/generic/simple-card-utils.c | 13 +++++++------
2 files changed, 12 insertions(+), 6 deletions(-)
--
2.7.4
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCYFC+9QAKCRDh3BK/laaZ
PNUIAQD+g4qznv8fTiN5Juj+qr42DsLAWutI0EdVvZI4UMe01AEAmlLrlHZCE1dM
inXPu/Nq+0gMytAlodcOkHFtdOZqpgY=
=9izk
-----END PGP SIGNATURE-----
Merge tag 'fuse-fixes-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
"Fix a deadlock and a couple of other bugs"
* tag 'fuse-fixes-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: 32-bit user space ioctl compat for fuse device
virtiofs: Fail dax mount if device does not support it
fuse: fix live lock in fuse_iget()
vaddr_get_pfns() now returns the positive number of pfns successfully
gotten instead of zero. vfio_pin_page_external() might return 1 to
vfio_iommu_type1_pin_pages(), which will treat it as an error, if
vaddr_get_pfns() is successful but vfio_pin_page_external() doesn't
reach vfio_lock_acct().
Fix it up in vfio_pin_page_external(). Found by inspection.
Fixes: be16c1fd99 ("vfio/type1: Change success value of vaddr_get_pfn()")
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Message-Id: <20210308172452.38864-1-daniel.m.jordan@oracle.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
VFIO_IOMMU_TYPE1 does not compile with !MMU:
../drivers/vfio/vfio_iommu_type1.c: In function 'follow_fault_pfn':
../drivers/vfio/vfio_iommu_type1.c:536:22: error: implicit declaration of function 'pte_write'; did you mean 'vfs_write'? [-Werror=implicit-function-declaration]
So require it.
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Message-Id: <0-v1-02cb5500df6e+78-vfio_no_mmu_jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
CONFIG_VFIO_AMBA has a light use of AMBA, adding some inline fallbacks
when AMBA is disabled will allow it to be compiled under COMPILE_TEST and
make VFIO easier to maintain.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Message-Id: <3-v1-df057e0f92c3+91-vfio_arm_compile_test_jgg@nvidia.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
x86 can build platform bus code too, so vfio-platform and all the platform
reset implementations compile successfully on x86.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Message-Id: <2-v1-df057e0f92c3+91-vfio_arm_compile_test_jgg@nvidia.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
As IOMMU_API is a kconfig without a description (eg does not show in the
menu) the correct operator is select not 'depends on'. Using 'depends on'
for this kind of symbol means VFIO is not selectable unless some other
random kconfig has already enabled IOMMU_API for it.
Fixes: cba3345cc4 ("vfio: VFIO core")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Message-Id: <1-v1-df057e0f92c3+91-vfio_arm_compile_test_jgg@nvidia.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Some ILP32 architectures support mapping a 32-bit vaddr within a 64-bit
iova space. The unmap-all code uses 32-bit SIZE_MAX as an upper bound on
the extent of the mappings within iova space, so mappings above 4G cannot
be found and unmapped. Use U64_MAX instead, and use u64 for size variables.
This also fixes a static analysis bug found by the kernel test robot running
smatch for ILP32.
Fixes: 0f53afa12b ("vfio/type1: unmap cleanup")
Fixes: c196509953 ("vfio/type1: implement unmap all")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Message-Id: <1614281102-230747-1-git-send-email-steven.sistare@oracle.com>
Link: https://lore.kernel.org/linux-mm/20210222141043.GW2222@kadam
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Fix typos in kernel doc, otherwise validation script complains:
.../irq_sim.c:170: warning: Function parameter or member 'fwnode' not described in 'irq_domain_create_sim'
.../irq_sim.c:170: warning: Excess function parameter 'fnode' description in 'irq_domain_create_sim'
.../irq_sim.c:240: warning: Function parameter or member 'fwnode' not described in 'devm_irq_domain_create_sim'
.../irq_sim.c:240: warning: Excess function parameter 'fnode' description in 'devm_irq_domain_create_sim'
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210302161453.28540-1-andriy.shevchenko@linux.intel.com
With a 64-bit kernel build the FUSE device cannot handle ioctl requests
coming from 32-bit user space. This is due to the ioctl command
translation that generates different command identifiers that thus cannot
be used for direct comparisons without proper manipulation.
Explicitly extract type and number from the ioctl command to enable 32-bit
user space compatibility on 64-bit kernel builds.
Signed-off-by: Alessio Balsini <balsini@android.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The HP EliteBook 850 G8 Notebook PC is using ALC285 codec which is
using 0x04 to control mute LED and 0x01 to control micmute LED.
Therefore, add a quirk to make it works.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210316094236.89028-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We do some IO operations in the snd_soc_component_set_jack callback
function and snd_soc_component_set_jack() will be called when soc
component is removed. However, we should not access SoundWire registers
when the bus is suspended.
So set regcache_cache_only(regmap, true) to avoid accessing in the
soc component removal process.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20210316005254.29699-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Simple-card/audio-graph-card drivers do not handle MCLK clock when it
is specified in the codec device node. The expectation here is that,
the codec should actually own up the MCLK clock and do necessary setup
in the driver.
Suggested-by: Mark Brown <broonie@kernel.org>
Suggested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1615829492-8972-3-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit 1e30f642cf ("ASoC: simple-card-utils: Fix device
module clock"). The original patch ended up breaking following platform,
which depends on set_sysclk() to configure internal PLL on wm8904 codec
and expects simple-card-utils to not update the MCLK rate.
- "arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts"
It would be best if codec takes care of setting MCLK clock via DAI
set_sysclk() callback.
Reported-by: Michael Walle <michael@walle.cc>
Suggested-by: Mark Brown <broonie@kernel.org>
Suggested-by: Michael Walle <michael@walle.cc>
Fixes: 1e30f642cf ("ASoC: simple-card-utils: Fix device module clock")
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Tested-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/1615829492-8972-2-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
request_irq() wont accept a name which contains slash so we need to
repalce it with something else -- otherwise it will trigger a warning
and the entry in /proc/irq/ will not be created
since the .name might be used by userspace and we don't want to break
userspace, so we are changing the parameters passed to request_irq()
[ 1.565966] name 'pci-das6402/16'
[ 1.566149] WARNING: CPU: 0 PID: 184 at fs/proc/generic.c:180 __xlate_proc_name+0x93/0xb0
[ 1.568923] RIP: 0010:__xlate_proc_name+0x93/0xb0
[ 1.574200] Call Trace:
[ 1.574722] proc_mkdir+0x18/0x20
[ 1.576629] request_threaded_irq+0xfe/0x160
[ 1.576859] auto_attach+0x60a/0xc40 [cb_pcidas64]
Suggested-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Link: https://lore.kernel.org/r/20210315195814.4692-1-ztong0001@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
request_irq() wont accept a name which contains slash so we need to
repalce it with something else -- otherwise it will trigger a warning
and the entry in /proc/irq/ will not be created
since the .name might be used by userspace and we don't want to break
userspace, so we are changing the parameters passed to request_irq()
[ 1.630764] name 'pci-das1602/16'
[ 1.630950] WARNING: CPU: 0 PID: 181 at fs/proc/generic.c:180 __xlate_proc_name+0x93/0xb0
[ 1.634009] RIP: 0010:__xlate_proc_name+0x93/0xb0
[ 1.639441] Call Trace:
[ 1.639976] proc_mkdir+0x18/0x20
[ 1.641946] request_threaded_irq+0xfe/0x160
[ 1.642186] cb_pcidas_auto_attach+0xf4/0x610 [cb_pcidas]
Suggested-by: Ian Abbott <abbotti@mev.co.uk>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Link: https://lore.kernel.org/r/20210315195914.4801-1-ztong0001@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The drivers/staging/ tree has a new mailing list,
linux-staging@lists.linux.dev, so move the MAINTAINER entry to point to
it so that we get patches sent to the proper place.
There was no need to specify a list for the hikey9xx driver, the tools
pick up the "base" list for drivers/staging/* so remove that line to
make the file simpler.
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/20210316102311.182375-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The VME and Android drivers still have their MAINTAINERS entries
pointing to the "driverdevel" mailing list, due to them having their
codebase move out of the drivers/staging/ directory, but no one
remembered to change the mailing list entries.
Move them both to linux-kernel for lack of a more specific place at the
moment. These are both low-volume areas of the kernel, so this
shouldn't be an issue.
Cc: Martyn Welch <martyn@welchs.me.uk>
Cc: Manohar Vanga <manohar.vanga@gmail.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Todd Kjos <tkjos@android.com>
Cc: Martijn Coenen <maco@android.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Christian Brauner <christian@brauner.io>
Cc: Hridya Valsaraju <hridya@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Reported-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Link: https://lore.kernel.org/r/YEzE6u6U1jkBatmr@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In readahead infrastructure, we are using a lot of hard coded PAGE_SHIFT
while we're not doing anything specific to PAGE_SIZE.
One of the most affected part is the radix tree operation of
btrfs_fs_info::reada_tree.
If using PAGE_SHIFT, subpage metadata readahead is broken and does no
help reading metadata ahead.
Fix the problem by using btrfs_fs_info::sectorsize_bits so that
readahead could work for subpage.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
When running fstests for btrfs subpage read-write test, it has a very
high chance to crash at generic/475 with the following stack:
BTRFS warning (device dm-8): direct IO failed ino 510 rw 1,34817 sector 0xcdf0 len 94208 err no 10
Unable to handle kernel paging request at virtual address ffff80001157e7c0
CPU: 2 PID: 687125 Comm: kworker/u12:4 Tainted: G WC 5.12.0-rc2-custom+ #5
Hardware name: Khadas VIM3 (DT)
Workqueue: btrfs-endio-meta btrfs_work_helper [btrfs]
pc : queued_spin_lock_slowpath+0x1a0/0x390
lr : do_raw_spin_lock+0xc4/0x11c
Call trace:
queued_spin_lock_slowpath+0x1a0/0x390
_raw_spin_lock+0x68/0x84
btree_readahead_hook+0x38/0xc0 [btrfs]
end_bio_extent_readpage+0x504/0x5f4 [btrfs]
bio_endio+0x170/0x1a4
end_workqueue_fn+0x3c/0x60 [btrfs]
btrfs_work_helper+0x1b0/0x1b4 [btrfs]
process_one_work+0x22c/0x430
worker_thread+0x70/0x3a0
kthread+0x13c/0x140
ret_from_fork+0x10/0x30
Code: 910020e0 8b0200c2 f861d884 aa0203e1 (f8246827)
[CAUSE]
In end_bio_extent_readpage(), if we hit an error during read, we will
handle the error differently for data and metadata.
For data we queue a repair, while for metadata, we record the error and
let the caller choose what to do.
But the code is still using page->private to grab extent buffer, which
no longer points to extent buffer for subpage metadata pages.
Thus this wild pointer access leads to above crash.
[FIX]
Introduce a helper, find_extent_buffer_readpage(), to grab extent
buffer.
The difference against find_extent_buffer_nospinlock() is:
- Also handles regular sectorsize == PAGE_SIZE case
- No extent buffer refs increase/decrease
As extent buffer under IO must have non-zero refs, so this is safe
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In case when the properties are supplied in the secondary fwnode
(for example, built-in device properties) the fwnode pointer left
unassigned. This makes unable to retrieve them.
Assign fwnode to parent's if no primary one provided.
Fixes: 7cba1a4d5e ("gpiolib: generalize devprop_gpiochip_set_names() for device properties")
Fixes: 2afa97e9868f ("gpiolib: Read "gpio-line-names" from a firmware node")
Reported-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Tested-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
zonefs updates the size of a sequential zone file inode only on
completion of direct writes. When executing asynchronous append writes
(with a file open with O_APPEND or using RWF_APPEND), the use of the
current inode size in generic_write_checks() to set an iocb offset thus
leads to unaligned write if an application issues an append write
operation with another write already being executed.
Fix this problem by introducing zonefs_write_checks() as a modified
version of generic_write_checks() using the file inode wp_offset for an
append write iocb offset. Also introduce zonefs_write_check_limits() to
replace generic_write_check_limits() call. This zonefs special helper
makes sure that the maximum file limit used is the maximum size of the
file being accessed.
Since zonefs_write_checks() already truncates the iov_iter, the calls
to iov_iter_truncate() in zonefs_file_dio_write() and
zonefs_file_buffered_write() are removed.
Fixes: 8dcc1a9d90 ("fs: New zonefs file system")
Cc: <stable@vger.kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
The sequential write constraint of sequential zone file prevent their
use as swap files. Only allow conventional zone files to be used as swap
files.
Fixes: 8dcc1a9d90 ("fs: New zonefs file system")
Cc: <stable@vger.kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
The HP EliteBook 840 G8 Notebook PC is using ALC236 codec which is
using 0x02 to control mute LED and 0x01 to control micmute LED.
Therefore, add a quirk to make it works.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210316074626.79895-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEDaZUZmFxRG/wNThrSFkpgVDWcbsFAmBP+doACgkQSFkpgVDW
cbvz5wgAg0XyMtSvgFdJ2yFb9RdcCGFmKAE/tgLSGvL1t6O2JpVHegCoP+0Z20c7
xy885cDsIrPJDsx86enFnj2wHTLQClNQf9xtVlEDqV2X1SbpoiKgP93MdSw0lxQx
Nda04Ffzrh/kHsKZlLgdzx+KPj7rGZQVM+q7gCqF477AfxCM0ngqcB62C8aR0ouX
K3UO9RYPi75J+bKL84BDT6dJ/a9KnXjNR8fcPi0hwpLDJnWLSZTtM7pgbiAzB8OO
56ZwYJGF8+hGWvBbpUBSEBYF+w37RIfbEtyCXmKq6olNQ8+0ENNg6Jdl3uZbCfxZ
k7KnC4/7SieaKdnJp8mi6XoqpjpXwA==
=Tfla
-----END PGP SIGNATURE-----
Merge tag 'usb-v5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-linus
Peter writes:
It fixed one incorrect value issue for cdns ssp driver
* tag 'usb-v5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb:
usb: cdnsp: Fixes incorrect value in ISOC TRB
The HP EliteBook 840 G8 Notebook PC is using ALC285 codec which is
using 0x04 to control mute LED and 0x01 to control micmute LED.
Therefore, add a quirk to make it works.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210316065452.75659-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If copy_from_user() or kstrtoull() fail then the correct behavior is to
return a negative error code.
Link: https://lore.kernel.org/r/YEsbU/UxYypVrC7/@mwanda
Fixes: f9bb2da11d ("[SCSI] lpfc 8.3.27: T10 additions for SLI4")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Only half of the file is under include guard because terminating #endif
is placed too early.
Link: https://lore.kernel.org/r/YE4snvoW1SuwcXAn@localhost.localdomain
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In st_open(), if STp->in_use is true, STp will be freed by
scsi_tape_put(). However, STp is still used by DEBC_printk() after. It is
better to DEBC_printk() before scsi_tape_put().
Link: https://lore.kernel.org/r/20210311064636.10522-1-lyl2019@mail.ustc.edu.cn
Acked-by: Kai Mäkisara <kai.makisara@kolumbus.fi>
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In myrs_cleanup(), cs->mmio_base will be freed twice by iounmap().
Link: https://lore.kernel.org/r/20210311063005.9963-1-lyl2019@mail.ustc.edu.cn
Fixes: 7726618639 ("scsi: myrs: Add Mylex RAID controller (SCSI interface)")
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The buffer for negotiating channel setup is DMA allocated at device probe
time. However, the remove path fails to free this allocation which will
prevent the hypervisor from releasing the virtual device in the case of a
hotplug remove.
Fix this issue by freeing the buffer allocation in ibmvfc_free_mem().
Link: https://lore.kernel.org/r/20210311012212.428068-1-tyreld@linux.ibm.com
Fixes: e95eef3fc0 ("scsi: ibmvfc: Implement channel enquiry and setup commands")
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In commit 05bc1be6db ("s390/pci: create zPCI bus") we removed the
pci_dev_put() call matching the earlier pci_get_slot() done as part of
__zpci_event_availability(). This was based on the wrong understanding
that the device_put() done as part of pci_destroy_device() would counter
the pci_get_slot() when it only counters the initial reference. This
same understanding and existing bad example also lead to not doing
a pci_dev_put() in zpci_remove_device().
Since releasing the PCI devices, unlike releasing the PCI slot, does not
print any debug message for testing I added one in pci_release_dev().
This revealed that we are indeed leaking the PCI device on PCI
hotunplug. Further testing also revealed another missing pci_dev_put() in
disable_slot().
Fix this by adding the missing pci_dev_put() in disable_slot() and fix
zpci_remove_device() with the correct pci_dev_put() calls. Also instead
of calling pci_get_slot() in __zpci_event_availability() to determine if
a PCI device is registered and then doing the same again in
zpci_remove_device() do this once in zpci_remove_device() which makes
sure that the pdev in __zpci_event_availability() is only used for the
result of pci_scan_single_device() which does not need a reference count
decremnt as its ownership goes to the PCI bus.
Also move the check if zdev->zbus->bus is set into zpci_remove_device()
since it may be that we're removing a device with devfn != 0 which never
had a PCI bus. So we can still set the pdev->error_state to indicate
that the device is not usable anymore, add a flag to set the error state.
Fixes: 05bc1be6db ("s390/pci: create zPCI bus")
Cc: <stable@vger.kernel.org> # 5.8+: e1bff843cd s390/pci: remove superfluous zdev->zbus check
Cc: <stable@vger.kernel.org> # 5.8+: ba764dd703 s390/pci: refactor zpci_create_device()
Cc: <stable@vger.kernel.org> # 5.8+
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Commit 152e9b8676 ("s390/vtime: steal time exponential moving average")
inadvertently changed the input value for account_steal_time() from
"cputime_to_nsecs(steal)" to just "steal", resulting in broken increased
steal time accounting.
Fix this by changing it back to "cputime_to_nsecs(steal)".
Fixes: 152e9b8676 ("s390/vtime: steal time exponential moving average")
Cc: <stable@vger.kernel.org> # 5.1
Reported-by: Sabine Forkel <sabine.forkel@de.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The following BUG message was triggered repeatedly when complete counter
sets are extracted from the CPUMF:
BUG: using smp_processor_id() in preemptible [00000000]
code: psvc-readsets/7759
caller is cf_diag_needspace+0x2c/0x100
CPU: 7 PID: 7759 Comm: psvc-readsets Not tainted 5.12.0
Hardware name: IBM 3906 M03 703 (LPAR)
Call Trace:
[<00000000c7043f78>] show_stack+0x90/0xf8
[<00000000c705776a>] dump_stack+0xba/0x108
[<00000000c705d91c>] check_preemption_disabled+0xec/0xf0
[<00000000c63eb1c4>] cf_diag_needspace+0x2c/0x100
[<00000000c63ecbcc>] cf_diag_ioctl_start+0x10c/0x240
[<00000000c63ece9a>] cf_diag_ioctl+0x19a/0x238
[<00000000c675f3f4>] __s390x_sys_ioctl+0xc4/0x100
[<00000000c63ca762>] do_syscall+0x82/0xd0
[<00000000c705bdd8>] __do_syscall+0xc0/0xd8
[<00000000c706d532>] system_call+0x72/0x98
2 locks held by psvc-readsets/7759:
#0: 00000000c75a57c0 (cpu_hotplug_lock){++++}-{0:0},
at: cf_diag_ioctl+0x44/0x238
#1: 00000000c75a3078 (cf_diag_ctrset_mutex){+.+.}-{3:3},
at: cf_diag_ioctl+0x54/0x238
This issue is a missing get_cpu_ptr/put_cpu_ptr pair in function
cf_diag_needspace. Add it.
Fixes: cf6acb8bdb ("s390/cpumf: Add support for complete counter set extraction")
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
[Why]
With certain fclock overclocks, state 1 may be chosen
as the closest clock level. This may result in this state
being empty if not populated beforehand, resulting in
black screens and screen corruption.
[How]
Copy over all soc states to clock_limits before bounding
box creation to avoid any cases with empty states.
Fixes: f2459c52c8 ("drm/amd/display: Add Bounding Box State for Low DF PState but High Voltage State")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1514
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com>
Acked-by: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
afs_listxattr() lists all the available special afs xattrs (i.e. those in
the "afs.*" space), no matter what type of server we're dealing with. But
OpenAFS servers, for example, cannot deal with some of the extra-capable
attributes that AuriStor (YFS) servers provide. Unfortunately, the
presence of the afs.yfs.* attributes causes errors[1] for anything that
tries to read them if the server is of the wrong type.
Fix the problem by removing afs_listxattr() so that none of the special
xattrs are listed (AFS doesn't support xattrs). It does mean, however,
that getfattr won't list them, though they can still be accessed with
getxattr() and setxattr().
This can be tested with something like:
getfattr -d -m ".*" /afs/example.com/path/to/file
With this change, none of the afs.* attributes should be visible.
Changes:
ver #2:
- Hide all of the afs.* xattrs, not just the ACL ones.
Fixes: ae46578b96 ("afs: Get YFS ACLs and information through xattrs")
Reported-by: Gaja Sophie Peters <gaja.peters@math.uni-hamburg.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Gaja Sophie Peters <gaja.peters@math.uni-hamburg.de>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: http://lists.infradead.org/pipermail/linux-afs/2021-March/003502.html [1]
Link: http://lists.infradead.org/pipermail/linux-afs/2021-March/003567.html # v1
Link: http://lists.infradead.org/pipermail/linux-afs/2021-March/003573.html # v2
If someone attempts to access YFS-related xattrs (e.g. afs.yfs.acl) on a
file on a non-YFS AFS server (such as OpenAFS), then the kernel will jump
to a NULL function pointer because the afs_fetch_acl_operation descriptor
doesn't point to a function for issuing an operation on a non-YFS
server[1].
Fix this by making afs_wait_for_operation() check that the issue_afs_rpc
method is set before jumping to it and setting -ENOTSUPP if not. This fix
also covers other potential operations that also only exist on YFS servers.
afs_xattr_get/set_yfs() then need to translate -ENOTSUPP to -ENODATA as the
former error is internal to the kernel.
The bug shows up as an oops like the following:
BUG: kernel NULL pointer dereference, address: 0000000000000000
[...]
Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
[...]
Call Trace:
afs_wait_for_operation+0x83/0x1b0 [kafs]
afs_xattr_get_yfs+0xe6/0x270 [kafs]
__vfs_getxattr+0x59/0x80
vfs_getxattr+0x11c/0x140
getxattr+0x181/0x250
? __check_object_size+0x13f/0x150
? __fput+0x16d/0x250
__x64_sys_fgetxattr+0x64/0xb0
do_syscall_64+0x49/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fb120a9defe
This was triggered with "cp -a" which attempts to copy xattrs, including
afs ones, but is easier to reproduce with getfattr, e.g.:
getfattr -d -m ".*" /afs/openafs.org/
Fixes: e49c7b2f6d ("afs: Build an abstraction around an "operation" concept")
Reported-by: Gaja Sophie Peters <gaja.peters@math.uni-hamburg.de>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Gaja Sophie Peters <gaja.peters@math.uni-hamburg.de>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Reviewed-by: Jeffrey Altman <jaltman@auristor.com>
cc: linux-afs@lists.infradead.org
Link: http://lists.infradead.org/pipermail/linux-afs/2021-March/003498.html [1]
Link: http://lists.infradead.org/pipermail/linux-afs/2021-March/003566.html # v1
Link: http://lists.infradead.org/pipermail/linux-afs/2021-March/003572.html # v2
When using a zoned filesystem, while syncing the log, if we fail to
allocate the root node for the log root tree, we are not removing the
log context we allocated on stack from the list of log contexts of the
log root tree. This means after the return from btrfs_sync_log() we get
a corrupted linked list.
Fix this by allocating the node before adding our stack allocated context
to the list of log contexts of the log root tree.
Fixes: 3ddebf27fc ("btrfs: zoned: reorder log node allocation on zoned filesystem")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
When running fsstress with only falloc workload, and a very low qgroup
limit set, we can get qgroup data rsv leak at unmount time.
BTRFS warning (device dm-0): qgroup 0/5 has unreleased space, type 0 rsv 20480
BTRFS error (device dm-0): qgroup reserved space leaked
The minimal reproducer looks like:
#!/bin/bash
dev=/dev/test/test
mnt="/mnt/btrfs"
fsstress=~/xfstests-dev/ltp/fsstress
runtime=8
workload()
{
umount $dev &> /dev/null
umount $mnt &> /dev/null
mkfs.btrfs -f $dev > /dev/null
mount $dev $mnt
btrfs quota en $mnt
btrfs quota rescan -w $mnt
btrfs qgroup limit 16m 0/5 $mnt
$fsstress -w -z -f creat=10 -f fallocate=10 -p 2 -n 100 \
-d $mnt -v > /tmp/fsstress
umount $mnt
if dmesg | grep leak ; then
echo "!!! FAILED !!!"
exit 1
fi
}
for (( i=0; i < $runtime; i++)); do
echo "=== $i/$runtime==="
workload
done
Normally it would fail before round 4.
[CAUSE]
In function insert_prealloc_file_extent(), we first call
btrfs_qgroup_release_data() to know how many bytes are reserved for
qgroup data rsv.
Then use that @qgroup_released number to continue our work.
But after we call btrfs_qgroup_release_data(), we should either queue
@qgroup_released to delayed ref or free them manually in error path.
Unfortunately, we lack the error handling to free the released bytes,
leaking qgroup data rsv.
All the error handling function outside won't help at all, as we have
released the range, meaning in inode io tree, the EXTENT_QGROUP_RESERVED
bit is already cleared, thus all btrfs_qgroup_free_data() call won't
free any data rsv.
[FIX]
Add free_qgroup tag to manually free the released qgroup data rsv.
Reported-by: Nikolay Borisov <nborisov@suse.com>
Reported-by: David Sterba <dsterba@suse.cz>
Fixes: 9729f10a60 ("btrfs: inode: move qgroup reserved space release to the callers of insert_reserved_file_extent()")
CC: stable@vger.kernel.org # 5.10+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is a piece of weird code in insert_prealloc_file_extent(), which
looks like:
ret = btrfs_qgroup_release_data(inode, file_offset, len);
if (ret < 0)
return ERR_PTR(ret);
if (trans) {
ret = insert_reserved_file_extent(trans, inode,
file_offset, &stack_fi,
true, ret);
...
}
extent_info.is_new_extent = true;
extent_info.qgroup_reserved = ret;
...
Note how the variable @ret is abused here, and if anyone is adding code
just after btrfs_qgroup_release_data() call, it's super easy to
overwrite the @ret and cause tons of qgroup related bugs.
Fix such abuse by introducing new variable @qgroup_released, so that we
won't reuse the existing variable @ret.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
The test generic/091 fails , with the following output:
fsx -N 10000 -o 128000 -l 500000 -r PSIZE -t BSIZE -w BSIZE -Z -W
mapped writes DISABLED
Seed set to 1
main: filesystem does not support fallocate mode FALLOC_FL_COLLAPSE_RANGE, disabling!
main: filesystem does not support fallocate mode FALLOC_FL_INSERT_RANGE, disabling!
skipping zero size read
truncating to largest ever: 0xe400
copying to largest ever: 0x1f400
cloning to largest ever: 0x70000
cloning to largest ever: 0x77000
fallocating to largest ever: 0x7a120
Mapped Read: non-zero data past EOF (0x3a7ff) page offset 0x800 is 0xf2e1 <<<
...
[CAUSE]
In commit c28ea613fa ("btrfs: subpage: fix the false data csum mismatch error")
end_bio_extent_readpage() changes to only zero the range inside the bvec
for incoming subpage support.
But that commit is using incorrect offset to calculate the start.
For subpage, we can have a case that the whole bvec is beyond isize,
thus we need to calculate the correct offset.
But the offending commit is using @end (bvec end), other than @start
(bvec start) to calculate the start offset.
This means, we only zero the last byte of the bvec, not from the isize.
This stupid bug makes the range beyond isize is not properly zeroed, and
failed above test.
[FIX]
Use correct @start to calculate the range start.
Reported-by: kernel test robot <oliver.sang@intel.com>
Fixes: c28ea613fa ("btrfs: subpage: fix the false data csum mismatch error")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
BULKSTAT_SINGLE exposed the ondisk uids/gids just like bulkstat, and can
be called on any inode, including ones not visible in the current mount.
Fixes: f736d93d76 ("xfs: support idmapped mounts")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
s/oustanding/outstanding/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
If we allocate quota inodes in the process of mounting a filesystem but
then decide to abort the mount, it's possible that the quota inodes are
sitting around pinned by the log. Now that inode reclaim relies on the
AIL to flush inodes, we have to force the log and push the AIL in
between releasing the quota inodes and kicking off reclaim to tear down
all the incore inodes. Do this by extracting the bits we need from the
unmount path and reusing them. As an added bonus, failed writes during
a failed mount will not retry forever now.
This was originally found during a fuzz test of metadata directories
(xfs/1546), but the actual symptom was that reclaim hung up on the quota
inodes.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
adi,ad7949
* Fix a wrong bitmask that could lead to an undefined bit being included.
adi,adi-axi-adc
* Add missing Kconfig dependencies
adi,adis16400
* Wrong error code handling in adis16400 that could lead to failed probe.
hid-sensor-humidity, temperature
* Fix alignment and space for timestamp channel.
hid-sensor-prox
* Fix an issue with handling of exponent on the channel scaling.
invensense,mpu3050
* Fix a hole in error handling.
qcom,spi-vadc
* Correct scaling
st,ab8500-adc
* Fix wrong scaling (by factor of 1000)
st,stm32-adc
* Add missing HAS_IOMEM dependency
st,stm32-timer-cnt
* Report count when running off internal clock
* Fix issue with not checking ceiling before trying to write to hardware
* Ensure driver doesn't have stashed state which doesn't match hardware by
rereading from hardware in a slow path.
-----BEGIN PGP SIGNATURE-----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=L5Yl
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-for-5.12a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus
Jonathan writes:
First set of IIO and counter fixes for the 5.12 cycle
adi,ad7949
* Fix a wrong bitmask that could lead to an undefined bit being included.
adi,adi-axi-adc
* Add missing Kconfig dependencies
adi,adis16400
* Wrong error code handling in adis16400 that could lead to failed probe.
hid-sensor-humidity, temperature
* Fix alignment and space for timestamp channel.
hid-sensor-prox
* Fix an issue with handling of exponent on the channel scaling.
invensense,mpu3050
* Fix a hole in error handling.
qcom,spi-vadc
* Correct scaling
st,ab8500-adc
* Fix wrong scaling (by factor of 1000)
st,stm32-adc
* Add missing HAS_IOMEM dependency
st,stm32-timer-cnt
* Report count when running off internal clock
* Fix issue with not checking ceiling before trying to write to hardware
* Ensure driver doesn't have stashed state which doesn't match hardware by
rereading from hardware in a slow path.
* tag 'iio-fixes-for-5.12a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: gyro: mpu3050: Fix error handling in mpu3050_trigger_handler
iio: hid-sensor-temperature: Fix issues of timestamp channel
iio: hid-sensor-humidity: Fix alignment issue of timestamp channel
counter: stm32-timer-cnt: fix ceiling miss-alignment with reload register
counter: stm32-timer-cnt: fix ceiling write max value
counter: stm32-timer-cnt: Report count function when SLAVE_MODE_DISABLED
iio: adc: ab8500-gpadc: Fix off by 10 to 3
iio:adc:stm32-adc: Add HAS_IOMEM dependency
iio: adis16400: Fix an error code in adis16400_initial_setup()
iio: adc: adi-axi-adc: add proper Kconfig dependencies
iio: adc: ad7949: fix wrong ADC result due to incorrect bit mask
iio: hid-sensor-prox: Fix scale not correct issue
iio:adc:qcom-spmi-vadc: add default scale to LR_MUX2_BAT_ID channel
