Using ERR_CAST() is more reasonable and safer, When it is necessary
to convert the type of an error pointer and return it.
Signed-off-by: Yan Zhen <yanzhen@vivo.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Reviewed-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20240829095509.3151987-1-yanzhen@vivo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As opposed to open-code, using the ERR_CAST macro clearly indicates that
this is a pointer to an error value and a type conversion was performed.
Signed-off-by: Shen Lichuan <shenlichuan@vivo.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com>
Reviewed-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/20240829021253.3066-1-shenlichuan@vivo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
FUJITA Tomonori says:
====================
net: phy: add Applied Micro QT2025 PHY driver
This patchset adds a PHY driver for Applied Micro Circuits Corporation
QT2025.
The first patch adds Rust equivalent to include/linux/sizes.h, makes
code more readable. The 2-5th patches update the PHYLIB Rust bindings.
The 4th and 5th patches have been reviewed previously in a different
thread [1].
QT2025 PHY support was implemented as a part of an Ethernet driver for
Tehuti Networks TN40xx chips. Multiple vendors (DLink, Asus, Edimax,
QNAP, etc) developed adapters based on TN40xx chips. Tehuti Networks
went out of business and the driver wasn't merged into mainline. But
it's still distributed with some of the hardware (and also available
on some vendor sites).
The original driver handles multiple PHY hardware (AMCC QT2025, TI
TLK10232, Aqrate AQR105, and Marvell MV88X3120, MV88X3310, and
MV88E2010). I divided the original driver into MAC and PHY drivers and
implemented a QT2025 PHY driver in Rust.
The MAC driver for Tehuti Networks TN40xx chips was already merged in
6.11-rc1. The MAC and this PHY drivers have been tested with Edimax
EN-9320SFP+ 10G network adapter.
[1] https://lore.kernel.org/rust-for-linux/20240607052113.69026-1-fujita.tomonori@gmail.com/
v7:
- add Trevor as Reviewer to MAINTAINERS file entry
- add Trevor Reviewed-by
- add/fix comments
- replace uppercase hex with lowercase
- remove unnecessary code
- update the commit message (1st patch)
v6: https://lore.kernel.org/netdev/20240820225719.91410-1-fujita.tomonori@gmail.com/
- improve comments
- make the logic to load firmware more readable
- add Copy trait to reg::{C22 and C45}
- add Trevor Reviewed-by
v5: https://lore.kernel.org/netdev/20240819005345.84255-1-fujita.tomonori@gmail.com/
- fix the comments (3th patch)
- add RUST_FW_LOADER_ABSTRACTIONS dependency
- add Andrew and Benno Reviewed-by
v4: https://lore.kernel.org/netdev/20240817051939.77735-1-fujita.tomonori@gmail.com/
- fix the comments
- add Andrew's Reviewed-by
- fix the order of tags
- remove wrong endianness conversion
v3: https://lore.kernel.org/netdev/20240804233835.223460-1-fujita.tomonori@gmail.com/
- use addr_of_mut!` to avoid intermediate mutable reference
- update probe callback's Safety comment
- add MODULE_FIRMWARE equivalent
- add Alice's Reviewed-by
v2: https://lore.kernel.org/netdev/20240731042136.201327-1-fujita.tomonori@gmail.com/
- add comments in accordance with the hw datasheet
- unify C22 and C45 APIs
- load firmware in probe callback instead of config_init
- use firmware API
- handle firmware endian
- check firmware size
- use SZ_*K constants
- avoid confusing phy_id variable
v1: https://lore.kernel.org/netdev/20240415104701.4772-1-fujita.tomonori@gmail.com/
====================
rom: FUJITA Tomonori <fujita.tomonori@gmail.com>
To: netdev@vger.kernel.org
Cc: rust-for-linux@vger.kernel.org, andrew@lunn.ch,
tmgross@umich.edu, miguel.ojeda.sandonis@gmail.com,
benno.lossin@proton.me, aliceryhl@google.com
Subject: [PATCH net-next v7 0/6] net: phy: add Applied Micro QT2025 PHY driver
Date: Sat, 24 Aug 2024 02:06:10 +0000 [thread overview]
Message-ID: <20240824020617.113828-1-fujita.tomonori@gmail.com> (raw)
This patchset adds a PHY driver for Applied Micro Circuits Corporation
QT2025.
The first patch adds Rust equivalent to include/linux/sizes.h, makes
code more readable. The 2-5th patches update the PHYLIB Rust bindings.
The 4th and 5th patches have been reviewed previously in a different
thread [1].
QT2025 PHY support was implemented as a part of an Ethernet driver for
Tehuti Networks TN40xx chips. Multiple vendors (DLink, Asus, Edimax,
QNAP, etc) developed adapters based on TN40xx chips. Tehuti Networks
went out of business and the driver wasn't merged into mainline. But
it's still distributed with some of the hardware (and also available
on some vendor sites).
The original driver handles multiple PHY hardware (AMCC QT2025, TI
TLK10232, Aqrate AQR105, and Marvell MV88X3120, MV88X3310, and
MV88E2010). I divided the original driver into MAC and PHY drivers and
implemented a QT2025 PHY driver in Rust.
The MAC driver for Tehuti Networks TN40xx chips was already merged in
6.11-rc1. The MAC and this PHY drivers have been tested with Edimax
EN-9320SFP+ 10G network adapter.
[1] https://lore.kernel.org/rust-for-linux/20240607052113.69026-1-fujita.tomonori@gmail.com/
v7:
- add Trevor as Reviewer to MAINTAINERS file entry
- add Trevor Reviewed-by
- add/fix comments
- replace uppercase hex with lowercase
- remove unnecessary code
- update the commit message (1st patch)
v6: https://lore.kernel.org/netdev/20240820225719.91410-1-fujita.tomonori@gmail.com/
- improve comments
- make the logic to load firmware more readable
- add Copy trait to reg::{C22 and C45}
- add Trevor Reviewed-by
v5: https://lore.kernel.org/netdev/20240819005345.84255-1-fujita.tomonori@gmail.com/
- fix the comments (3th patch)
- add RUST_FW_LOADER_ABSTRACTIONS dependency
- add Andrew and Benno Reviewed-by
v4: https://lore.kernel.org/netdev/20240817051939.77735-1-fujita.tomonori@gmail.com/
- fix the comments
- add Andrew's Reviewed-by
- fix the order of tags
- remove wrong endianness conversion
v3: https://lore.kernel.org/netdev/20240804233835.223460-1-fujita.tomonori@gmail.com/
- use addr_of_mut!` to avoid intermediate mutable reference
- update probe callback's Safety comment
- add MODULE_FIRMWARE equivalent
- add Alice's Reviewed-by
v2: https://lore.kernel.org/netdev/20240731042136.201327-1-fujita.tomonori@gmail.com/
- add comments in accordance with the hw datasheet
- unify C22 and C45 APIs
- load firmware in probe callback instead of config_init
- use firmware API
- handle firmware endian
- check firmware size
- use SZ_*K constants
- avoid confusing phy_id variable
v1: https://lore.kernel.org/netdev/20240415104701.4772-1-fujita.tomonori@gmail.com/
Signed-off-by: David S. Miller <davem@davemloft.net>
rom: FUJITA Tomonori <fujita.tomonori@gmail.com>
To: netdev@vger.kernel.org
Cc: rust-for-linux@vger.kernel.org, andrew@lunn.ch,
tmgross@umich.edu, miguel.ojeda.sandonis@gmail.com,
benno.lossin@proton.me, aliceryhl@google.com
Subject: [PATCH net-next v7 0/6] net: phy: add Applied Micro QT2025 PHY driver
Date: Sat, 24 Aug 2024 02:06:10 +0000 [thread overview]
Message-ID: <20240824020617.113828-1-fujita.tomonori@gmail.com> (raw)
This patchset adds a PHY driver for Applied Micro Circuits Corporation
QT2025.
The first patch adds Rust equivalent to include/linux/sizes.h, makes
code more readable. The 2-5th patches update the PHYLIB Rust bindings.
The 4th and 5th patches have been reviewed previously in a different
thread [1].
QT2025 PHY support was implemented as a part of an Ethernet driver for
Tehuti Networks TN40xx chips. Multiple vendors (DLink, Asus, Edimax,
QNAP, etc) developed adapters based on TN40xx chips. Tehuti Networks
went out of business and the driver wasn't merged into mainline. But
it's still distributed with some of the hardware (and also available
on some vendor sites).
The original driver handles multiple PHY hardware (AMCC QT2025, TI
TLK10232, Aqrate AQR105, and Marvell MV88X3120, MV88X3310, and
MV88E2010). I divided the original driver into MAC and PHY drivers and
implemented a QT2025 PHY driver in Rust.
The MAC driver for Tehuti Networks TN40xx chips was already merged in
6.11-rc1. The MAC and this PHY drivers have been tested with Edimax
EN-9320SFP+ 10G network adapter.
[1] https://lore.kernel.org/rust-for-linux/20240607052113.69026-1-fujita.tomonori@gmail.com/
v7:
- add Trevor as Reviewer to MAINTAINERS file entry
- add Trevor Reviewed-by
- add/fix comments
- replace uppercase hex with lowercase
- remove unnecessary code
- update the commit message (1st patch)
v6: https://lore.kernel.org/netdev/20240820225719.91410-1-fujita.tomonori@gmail.com/
- improve comments
- make the logic to load firmware more readable
- add Copy trait to reg::{C22 and C45}
- add Trevor Reviewed-by
v5: https://lore.kernel.org/netdev/20240819005345.84255-1-fujita.tomonori@gmail.com/
- fix the comments (3th patch)
- add RUST_FW_LOADER_ABSTRACTIONS dependency
- add Andrew and Benno Reviewed-by
v4: https://lore.kernel.org/netdev/20240817051939.77735-1-fujita.tomonori@gmail.com/
- fix the comments
- add Andrew's Reviewed-by
- fix the order of tags
- remove wrong endianness conversion
v3: https://lore.kernel.org/netdev/20240804233835.223460-1-fujita.tomonori@gmail.com/
- use addr_of_mut!` to avoid intermediate mutable reference
- update probe callback's Safety comment
- add MODULE_FIRMWARE equivalent
- add Alice's Reviewed-by
v2: https://lore.kernel.org/netdev/20240731042136.201327-1-fujita.tomonori@gmail.com/
- add comments in accordance with the hw datasheet
- unify C22 and C45 APIs
- load firmware in probe callback instead of config_init
- use firmware API
- handle firmware endian
- check firmware size
- use SZ_*K constants
- avoid confusing phy_id variable
v1: https://lore.kernel.org/netdev/20240415104701.4772-1-fujita.tomonori@gmail.com/
Signed-off-by: David S. Miller <davem@davemloft.net>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
This driver supports Applied Micro Circuits Corporation QT2025 PHY,
based on a driver for Tehuti Networks TN40xx chips.
The original driver for TN40xx chips supports multiple PHY hardware
(AMCC QT2025, TI TLK10232, Aqrate AQR105, and Marvell 88X3120,
88X3310, and MV88E2010). This driver is extracted from the original
driver and modified to a PHY driver in Rust.
This has been tested with Edimax EN-9320SFP+ 10G network adapter.
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add unified genphy_read_status function for C22 and C45
registers. Instead of having genphy_c22 and genphy_c45 methods, this
unifies genphy_read_status functions for C22 and C45.
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the unified read/write API for C22 and C45 registers. The
abstractions support access to only C22 registers now. Instead of
adding read/write_c45 methods specifically for C45, a new reg module
supports the unified API to access C22 and C45 registers with trait,
by calling an appropriate phylib functions.
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement AsRef<kernel::device::Device> trait for Device. A PHY driver
needs a reference to device::Device to call the firmware API.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Support phy_driver probe callback, used to set up device-specific
structures.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add rust equivalent to include/linux/sizes.h, makes code more
readable. Only SZ_*K that QT2025 PHY driver uses are added.
Make generated constants accessible with a proper type.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A range of MSIX vectors are allocated at initialization for the number
needed for RocE and L2. During run-time, if the user increases or
decreases the number of L2 rings, all the MSIX vectors have to be
freed and a new range has to be allocated. This is not optimal and
causes disruptions to RoCE traffic every time there is a change in L2
MSIX.
If the system supports dynamic MSIX allocations, use dynamic
allocation to add new L2 MSIX vectors or free unneeded L2 MSIX
vectors. RoCE traffic is not affected using this scheme.
Reviewed-by: Hongguang Gao <hongguang.gao@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20240828183235.128948-10-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If dynamic MSIX allocation is supported, additional MSIX can be
allocated at run-time without reinitializing the existing MSIX entries.
The first step to support this dynamic scheme is to allocate a large
enough bp->irq_tbl if dynamic allocation is supported.
Reviewed-by: Hongguang Gao <hongguang.gao@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20240828183235.128948-9-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the new pci_alloc_irq_vectors() and pci_free_irq_vectors() to
replace the deprecated pci_enable_msix_range() and pci_disable_msix().
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20240828183235.128948-8-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In legacy INTX mode, a register is mapped so that the INTX handler can
read it to determine if the NIC is the source of the interrupt. This
and all the related macros are no longer needed now that INTX is no
longer supported.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Hongguang Gao <hongguang.gao@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20240828183235.128948-7-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that we only support MSIX, the BNXT_FLAG_USING_MSIX is always true.
Remove it and any if conditions checking for it. Remove the INTX
handler and associated logic.
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Hongguang Gao <hongguang.gao@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20240828183235.128948-6-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Firmware has deprecated support for legacy INTX in 2022 (since v2.27)
and INTX hasn't been tested for many years before that. INTX was
only used as a fallback mechansim in case MSIX wasn't available. MSIX
is always supported by all firmware. If MSIX capability in PCI config
space is not found during probe, abort.
Reviewed-by: Hongguang Gao <hongguang.gao@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20240828183235.128948-5-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With recent changes in the .ndo_set_vf_*() guidelines, resubmitting
this patch that was reverted eariler in 2023:
c27153682e ("Revert "bnxt_en: Support QOS and TPID settings for the SRIOV VLAN")
Add these missing settings in the .ndo_set_vf_vlan() method.
Older firmware does not support the TPID setting so check for
proper support.
Remove the unused BNXT_VF_QOS flag.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20240828183235.128948-4-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for retrieving crash dump using ethtool -w on the
supported interface.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20240828183235.128948-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Newer firmware supports automatic DMA of crash dump to host memory
when it crashes. If the feature is supported, allocate the required
memory using the existing context memory infrastructure. Communicate
the page table containing the DMA addresses to the firmware.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20240828183235.128948-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jon Maloy says:
====================
Adding SO_PEEK_OFF for TCPv6
Adding SO_PEEK_OFF for TCPv6 and selftest for both TCPv4 and TCPv6
====================
Link: https://patch.msgid.link/20240828183752.660267-1-jmaloy@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We add a selftest to check that the new feature added in
commit 05ea491641 ("tcp: add support for SO_PEEK_OFF socket option")
works correctly.
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Tested-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Jon Maloy <jmaloy@redhat.com>
Link: https://patch.msgid.link/20240828183752.660267-3-jmaloy@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When doing further testing of the recently added SO_PEEK_OFF feature
for TCP I realized I had omitted to add it for TCP/IPv6.
I do that here.
Fixes: 05ea491641 ("tcp: add support for SO_PEEK_OFF socket option")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Tested-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Jon Maloy <jmaloy@redhat.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20240828183752.660267-2-jmaloy@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Someone reported on GitHub that the YNL NIPA test is failing
when run locally. The test builds the tools, and it hits:
netdev.c:82:9: warning: ignoring return value of ‘scanf’ declared with attribute ‘warn_unused_result’ [-Wunused-result]
82 | scanf("%d", &ifindex);
I can't repro this on my setups but error seems clear enough.
Link: https://github.com/linux-netdev/nipa/discussions/37
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://patch.msgid.link/20240828173609.2951335-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The deprecated helper strcpy() performs no bounds checking on the
destination buffer. This could result in linear overflows beyond
the end of the buffer, leading to all kinds of misbehaviors.
The safe replacement is strscpy() [1].
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strcpy [1]
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
use dev_err_probe() instead of dev_err() to simplify the error path and
standardize the format of the error code.
Signed-off-by: Yang Ruibin <11162571@vivo.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240828122650.1324246-1-11162571@vivo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the IS_ERR_OR_NULL() helper instead of open-coding a
NULL and an error pointer checks to simplify the code and
improve readability.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240828122336.3697176-1-lihongbo22@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using dev_err_cast_probe() to simplify the code.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Link: https://patch.msgid.link/20240828121805.3696631-1-lihongbo22@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stefan Wahren says:
====================
net: vertexcom: mse102x: Minor clean-ups
This series provides some minor clean-ups for the Vertexcom MSE102x
driver.
====================
Link: https://patch.msgid.link/20240827191000.3244-1-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is already a define for minimum Ethernet frame length without FCS.
So used this instead of the magic number.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240827191000.3244-6-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This message is a leftover from initial development. It's
unnecessary now and can be dropped.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240827191000.3244-5-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
At the time of MAC address assignment the netdev is not registered yet,
so netdev log functions won't work as expected. While we are at this
downgrade the log level to a warning, because a random MAC address is
not a real error.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240827191000.3244-4-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As long as the MSE102x is not operational, every packet transmission
will run into a TX timeout and flood the kernel log. So log only the
first TX timeout and a user is at least informed about this issue.
The amount of timeouts are still available via netstat.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240827191000.3244-3-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This macro has the advantage over SET_SYSTEM_SLEEP_PM_OPS that we don't
have to care about when the functions are actually used.
Also make use of pm_sleep_ptr() to discard all PM_SLEEP related
stuff if CONFIG_PM_SLEEP isn't enabled.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240827191000.3244-2-wahrenst@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
No known outstanding regressions.
Current release - regressions:
- wifi: iwlwifi: fix hibernation
- eth: ionic: prevent tx_timeout due to frequent doorbell ringing
Previous releases - regressions:
- sched: fix sch_fq incorrect behavior for small weights
- wifi:
- iwlwifi: take the mutex before running link selection
- wfx: repair open network AP mode
- netfilter: restore IP sanity checks for netdev/egress
- tcp: fix forever orphan socket caused by tcp_abort
- mptcp: close subflow when receiving TCP+FIN
- bluetooth: fix random crash seen while removing btnxpuart driver
Previous releases - always broken:
- mptcp: more fixes for the in-kernel PM
- eth: bonding: change ipsec_lock from spin lock to mutex
- eth: mana: fix race of mana_hwc_post_rx_wqe and new hwc response
Misc:
- documentation: drop special comment style for net code
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=yJIE
-----END PGP SIGNATURE-----
Merge tag 'net-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth, wireless and netfilter.
No known outstanding regressions.
Current release - regressions:
- wifi: iwlwifi: fix hibernation
- eth: ionic: prevent tx_timeout due to frequent doorbell ringing
Previous releases - regressions:
- sched: fix sch_fq incorrect behavior for small weights
- wifi:
- iwlwifi: take the mutex before running link selection
- wfx: repair open network AP mode
- netfilter: restore IP sanity checks for netdev/egress
- tcp: fix forever orphan socket caused by tcp_abort
- mptcp: close subflow when receiving TCP+FIN
- bluetooth: fix random crash seen while removing btnxpuart driver
Previous releases - always broken:
- mptcp: more fixes for the in-kernel PM
- eth: bonding: change ipsec_lock from spin lock to mutex
- eth: mana: fix race of mana_hwc_post_rx_wqe and new hwc response
Misc:
- documentation: drop special comment style for net code"
* tag 'net-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits)
nfc: pn533: Add poll mod list filling check
mailmap: update entry for Sriram Yagnaraman
selftests: mptcp: join: check re-re-adding ID 0 signal
mptcp: pm: ADD_ADDR 0 is not a new address
selftests: mptcp: join: validate event numbers
mptcp: avoid duplicated SUB_CLOSED events
selftests: mptcp: join: check re-re-adding ID 0 endp
mptcp: pm: fix ID 0 endp usage after multiple re-creations
mptcp: pm: do not remove already closed subflows
selftests: mptcp: join: no extra msg if no counter
selftests: mptcp: join: check re-adding init endp with != id
mptcp: pm: reset MPC endp ID when re-added
mptcp: pm: skip connecting to already established sf
mptcp: pm: send ACK on an active subflow
selftests: mptcp: join: check removing ID 0 endpoint
mptcp: pm: fix RM_ADDR ID for the initial subflow
mptcp: pm: reuse ID 0 after delete and re-add
net: busy-poll: use ktime_get_ns() instead of local_clock()
sctp: fix association labeling in the duplicate COOKIE-ECHO case
mptcp: pr_debug: add missing \n at the end
...
In case of im_protocols value is 1 and tm_protocols value is 0 this
combination successfully passes the check
'if (!im_protocols && !tm_protocols)' in the nfc_start_poll().
But then after pn533_poll_create_mod_list() call in pn533_start_poll()
poll mod list will remain empty and dev->poll_mod_count will remain 0
which lead to division by zero.
Normally no im protocol has value 1 in the mask, so this combination is
not expected by driver. But these protocol values actually come from
userspace via Netlink interface (NFC_CMD_START_POLL operation). So a
broken or malicious program may pass a message containing a "bad"
combination of protocol parameter values so that dev->poll_mod_count
is not incremented inside pn533_poll_create_mod_list(), thus leading
to division by zero.
Call trace looks like:
nfc_genl_start_poll()
nfc_start_poll()
->start_poll()
pn533_start_poll()
Add poll mod list filling check.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: dfccd0f580 ("NFC: pn533: Add some polling entropy")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240827084822.18785-1-amishin@t-argos.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=baH4
-----END PGP SIGNATURE-----
Merge tag 'nf-24-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
Patch #1 sets on NFT_PKTINFO_L4PROTO for UDP packets less than 4 bytes
payload from netdev/egress by subtracting skb_network_offset() when
validating IPv4 packet length, otherwise 'meta l4proto udp' never
matches.
Patch #2 subtracts skb_network_offset() when validating IPv6 packet
length for netdev/egress.
netfilter pull request 24-08-28
* tag 'nf-24-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables_ipv6: consider network offset in netdev/egress validation
netfilter: nf_tables: restore IP sanity checks for netdev/egress
====================
Link: https://patch.msgid.link/20240828214708.619261-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Matthieu Baerts says:
====================
mptcp: more fixes for the in-kernel PM
Here is a new batch of fixes for the MPTCP in-kernel path-manager:
Patch 1 ensures the address ID is set to 0 when the path-manager sends
an ADD_ADDR for the address of the initial subflow. The same fix is
applied when a new subflow is created re-using this special address. A
fix for v6.0.
Patch 2 is similar, but for the case where an endpoint is removed: if
this endpoint was used for the initial address, it is important to send
a RM_ADDR with this ID set to 0, and look for existing subflows with the
ID set to 0. A fix for v6.0 as well.
Patch 3 validates the two previous patches.
Patch 4 makes the PM selecting an "active" path to send an address
notification in an ACK, instead of taking the first path in the list. A
fix for v5.11.
Patch 5 fixes skipping the establishment of a new subflow if a previous
subflow using the same pair of addresses is being closed. A fix for
v5.13.
Patch 6 resets the ID linked to the initial subflow when the linked
endpoint is re-added, possibly with a different ID. A fix for v6.0.
Patch 7 validates the three previous patches.
Patch 8 is a small fix for the MPTCP Join selftest, when being used with
older subflows not supporting all MIB counters. A fix for a commit
introduced in v6.4, but backported up to v5.10.
Patch 9 avoids the PM to try to close the initial subflow multiple
times, and increment counters while nothing happened. A fix for v5.10.
Patch 10 stops incrementing local_addr_used and add_addr_accepted
counters when dealing with the address ID 0, because these counters are
not taking into account the initial subflow, and are then not
decremented when the linked addresses are removed. A fix for v6.0.
Patch 11 validates the previous patch.
Patch 12 avoids the PM to send multiple SUB_CLOSED events for the
initial subflow. A fix for v5.12.
Patch 13 validates the previous patch.
Patch 14 stops treating the ADD_ADDR 0 as a new address, and accepts it
in order to re-create the initial subflow if it has been closed, even if
the limit for *new* addresses -- not taking into account the address of
the initial subflow -- has been reached. A fix for v5.10.
Patch 15 validates the previous patch.
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
---
Matthieu Baerts (NGI0) (15):
mptcp: pm: reuse ID 0 after delete and re-add
mptcp: pm: fix RM_ADDR ID for the initial subflow
selftests: mptcp: join: check removing ID 0 endpoint
mptcp: pm: send ACK on an active subflow
mptcp: pm: skip connecting to already established sf
mptcp: pm: reset MPC endp ID when re-added
selftests: mptcp: join: check re-adding init endp with != id
selftests: mptcp: join: no extra msg if no counter
mptcp: pm: do not remove already closed subflows
mptcp: pm: fix ID 0 endp usage after multiple re-creations
selftests: mptcp: join: check re-re-adding ID 0 endp
mptcp: avoid duplicated SUB_CLOSED events
selftests: mptcp: join: validate event numbers
mptcp: pm: ADD_ADDR 0 is not a new address
selftests: mptcp: join: check re-re-adding ID 0 signal
net/mptcp/pm.c | 4 +-
net/mptcp/pm_netlink.c | 87 ++++++++++----
net/mptcp/protocol.c | 6 +
net/mptcp/protocol.h | 5 +-
tools/testing/selftests/net/mptcp/mptcp_join.sh | 153 ++++++++++++++++++++----
tools/testing/selftests/net/mptcp/mptcp_lib.sh | 4 +
6 files changed, 209 insertions(+), 50 deletions(-)
---
base-commit: 3a0504d54b
change-id: 20240826-net-mptcp-more-pm-fix-ffa61a36f817
Best regards,
====================
Link: https://patch.msgid.link/20240828-net-mptcp-more-pm-fix-v2-0-7f11b283fff7@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This test extends "delete re-add signal" to validate the previous
commit: when the 'signal' endpoint linked to the initial subflow (ID 0)
is re-added multiple times, it will re-send the ADD_ADDR with id 0. The
client should still be able to re-create this subflow, even if the
add_addr_accepted limit has been reached as this special address is not
considered as a new address.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: d0876b2284 ("mptcp: add the incoming RM_ADDR support")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The ADD_ADDR 0 with the address from the initial subflow should not be
considered as a new address: this is not something new. If the host
receives it, it simply means that the address is available again.
When receiving an ADD_ADDR for the ID 0, the PM already doesn't consider
it as new by not incrementing the 'add_addr_accepted' counter. But the
'accept_addr' might not be set if the limit has already been reached:
this can be bypassed in this case. But before, it is important to check
that this ADD_ADDR for the ID 0 is for the same address as the initial
subflow. If not, it is not something that should happen, and the
ADD_ADDR can be ignored.
Note that if an ADD_ADDR is received while there is already a subflow
opened using the same address, this ADD_ADDR is ignored as well. It
means that if multiple ADD_ADDR for ID 0 are received, there will not be
any duplicated subflows created by the client.
Fixes: d0876b2284 ("mptcp: add the incoming RM_ADDR support")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This test extends "delete and re-add" and "delete re-add signal" to
validate the previous commit: the number of MPTCP events are checked to
make sure there are no duplicated or unexpected ones.
A new helper has been introduced to easily check these events. The
missing events have been added to the lib.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: b911c97c7d ("mptcp: add netlink event support")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The initial subflow might have already been closed, but still in the
connection list. When the worker is instructed to close the subflows
that have been marked as closed, it might then try to close the initial
subflow again.
A consequence of that is that the SUB_CLOSED event can be seen twice:
# ip mptcp endpoint
1.1.1.1 id 1 subflow dev eth0
2.2.2.2 id 2 subflow dev eth1
# ip mptcp monitor &
[ CREATED] remid=0 locid=0 saddr4=1.1.1.1 daddr4=9.9.9.9
[ ESTABLISHED] remid=0 locid=0 saddr4=1.1.1.1 daddr4=9.9.9.9
[ SF_ESTABLISHED] remid=0 locid=2 saddr4=2.2.2.2 daddr4=9.9.9.9
# ip mptcp endpoint delete id 1
[ SF_CLOSED] remid=0 locid=0 saddr4=1.1.1.1 daddr4=9.9.9.9
[ SF_CLOSED] remid=0 locid=0 saddr4=1.1.1.1 daddr4=9.9.9.9
The first one is coming from mptcp_pm_nl_rm_subflow_received(), and the
second one from __mptcp_close_subflow().
To avoid doing the post-closed processing twice, the subflow is now
marked as closed the first time.
Note that it is not enough to check if we are dealing with the first
subflow and check its sk_state: the subflow might have been reset or
closed before calling mptcp_close_ssk().
Fixes: b911c97c7d ("mptcp: add netlink event support")
Cc: stable@vger.kernel.org
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
