If one of the underlying disks of raid or dm is set to read-only, then
each io will generate new log, which will cause message storm. This
environment is indeed problematic, however we can't make sure our
naive custormer won't do this, hence use pr_warn_ratelimited() to
prevent message storm in this case.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Fixes: 57e95e4670 ("block: fix and cleanup bio_check_ro")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Link: https://lore.kernel.org/r/20231107111247.2157820-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
there's little I can say which isn't in the individual changelogs.
The lengthier patch series are
- "kdump: use generic functions to simplify crashkernel reservation in
arch", from Baoquan He. This is mainly cleanups and consolidation of
the "crashkernel=" kernel parameter handling.
- After much discussion, David Laight's "minmax: Relax type checks in
min() and max()" is here. Hopefully reduces some typecasting and the
use of min_t() and max_t().
- A group of patches from Oleg Nesterov which clean up and slightly fix
our handling of reads from /proc/PID/task/... and which remove
task_struct.therad_group.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZUQP9wAKCRDdBJ7gKXxA
jmOAAQDh8sxagQYocoVsSm28ICqXFeaY9Co1jzBIDdNesAvYVwD/c2DHRqJHEiS4
63BNcG3+hM9nwGJHb5lyh5m79nBMRg0=
=On4u
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"As usual, lots of singleton and doubleton patches all over the tree
and there's little I can say which isn't in the individual changelogs.
The lengthier patch series are
- 'kdump: use generic functions to simplify crashkernel reservation
in arch', from Baoquan He. This is mainly cleanups and
consolidation of the 'crashkernel=' kernel parameter handling
- After much discussion, David Laight's 'minmax: Relax type checks in
min() and max()' is here. Hopefully reduces some typecasting and
the use of min_t() and max_t()
- A group of patches from Oleg Nesterov which clean up and slightly
fix our handling of reads from /proc/PID/task/... and which remove
task_struct.thread_group"
* tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (64 commits)
scripts/gdb/vmalloc: disable on no-MMU
scripts/gdb: fix usage of MOD_TEXT not defined when CONFIG_MODULES=n
.mailmap: add address mapping for Tomeu Vizoso
mailmap: update email address for Claudiu Beznea
tools/testing/selftests/mm/run_vmtests.sh: lower the ptrace permissions
.mailmap: map Benjamin Poirier's address
scripts/gdb: add lx_current support for riscv
ocfs2: fix a spelling typo in comment
proc: test ProtectionKey in proc-empty-vm test
proc: fix proc-empty-vm test with vsyscall
fs/proc/base.c: remove unneeded semicolon
do_io_accounting: use sig->stats_lock
do_io_accounting: use __for_each_thread()
ocfs2: replace BUG_ON() at ocfs2_num_free_extents() with ocfs2_error()
ocfs2: fix a typo in a comment
scripts/show_delta: add __main__ judgement before main code
treewide: mark stuff as __ro_after_init
fs: ocfs2: check status values
proc: test /proc/${pid}/statm
compiler.h: move __is_constexpr() to compiler.h
...
-----BEGIN PGP SIGNATURE-----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=sace
-----END PGP SIGNATURE-----
Merge tag 'for-6.7/block-2023-10-30' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- Improvements to the queue_rqs() support, and adding null_blk support
for that as well (Chengming)
- Series improving badblocks support (Coly)
- Key store support for sed-opal (Greg)
- IBM partition string handling improvements (Jan)
- Make number of ublk devices supported configurable (Mike)
- Cancelation improvements for ublk (Ming)
- MD pull requests via Song:
- Handle timeout in md-cluster, by Denis Plotnikov
- Cleanup pers->prepare_suspend, by Yu Kuai
- Rewrite mddev_suspend(), by Yu Kuai
- Simplify md_seq_ops, by Yu Kuai
- Reduce unnecessary locking array_state_store(), by Mariusz
Tkaczyk
- Make rdev add/remove independent from daemon thread, by Yu Kuai
- Refactor code around quiesce() and mddev_suspend(), by Yu Kuai
- NVMe pull request via Keith:
- nvme-auth updates (Mark)
- nvme-tcp tls (Hannes)
- nvme-fc annotaions (Kees)
- Misc cleanups and improvements (Jiapeng, Joel)
* tag 'for-6.7/block-2023-10-30' of git://git.kernel.dk/linux: (95 commits)
block: ublk_drv: Remove unused function
md: cleanup pers->prepare_suspend()
nvme-auth: allow mixing of secret and hash lengths
nvme-auth: use transformed key size to create resp
nvme-auth: alloc nvme_dhchap_key as single buffer
nvmet-tcp: use 'spin_lock_bh' for state_lock()
powerpc/pseries: PLPKS SED Opal keystore support
block: sed-opal: keystore access for SED Opal keys
block:sed-opal: SED Opal keystore
ublk: simplify aborting request
ublk: replace monitor with cancelable uring_cmd
ublk: quiesce request queue when aborting queue
ublk: rename mm_lock as lock
ublk: move ublk_cancel_dev() out of ub->mutex
ublk: make sure io cmd handled in submitter task context
ublk: don't get ublk device reference in ublk_abort_queue()
ublk: Make ublks_max configurable
ublk: Limit dev_id/ub_number values
md-cluster: check for timeout while a new disk adding
nvme: rework NVME_AUTH Kconfig selection
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZT0C2gAKCRCRxhvAZXjc
otV8AQCK5F9ONoQ7ISpdrKyUJiswySGXx0CYPfXbSg5gHH87zgEAua3vwVKeGXXF
5iVsdiNzIIQDwGDx7FyxufL4ggcN6gQ=
=E1kV
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.7.super' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs superblock updates from Christian Brauner:
"This contains the work to make block device opening functions return a
struct bdev_handle instead of just a struct block_device. The same
struct bdev_handle is then also passed to block device closing
functions.
This allows us to propagate context from opening to closing a block
device without having to modify all users everytime.
Sidenote, in the future we might even want to try and have block
device opening functions return a struct file directly but that's a
series on top of this.
These are further preparatory changes to be able to count writable
opens and blocking writes to mounted block devices. That's a separate
piece of work for next cycle and for that we absolutely need the
changes to btrfs that have been quietly dropped somehow.
Originally the series contained a patch that removed the old
blkdev_*() helpers. But since this would've caused needles churn in
-next for bcachefs we ended up delaying it.
The second piece of work addresses one of the major annoyances about
the work last cycle, namely that we required dropping s_umount
whenever we used the superblock and fs_holder_ops for a block device.
The reason for that requirement had been that in some codepaths
s_umount could've been taken under disk->open_mutex (that's always
been the case, at least theoretically). For example, on surprise block
device removal or media change. And opening and closing block devices
required grabbing disk->open_mutex as well.
So we did the work and went through the block layer and fixed all
those places so that s_umount is never taken under disk->open_mutex.
This means no more brittle games where we yield and reacquire s_umount
during block device opening and closing and no more requirements where
block devices need to be closed. Filesystems don't need to care about
this.
There's a bunch of other follow-up work such as moving block device
freezing and thawing to holder operations which makes it work for all
block devices and not just the main block device just as we did for
surprise removal. But that is for next cycle.
Tested with fstests for all major fses, blktests, LTP"
* tag 'vfs-6.7.super' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (37 commits)
porting: update locking requirements
fs: assert that open_mutex isn't held over holder ops
block: assert that we're not holding open_mutex over blk_report_disk_dead
block: move bdev_mark_dead out of disk_check_media_change
block: WARN_ON_ONCE() when we remove active partitions
block: simplify bdev_del_partition()
fs: Avoid grabbing sb->s_umount under bdev->bd_holder_lock
jfs: fix log->bdev_handle null ptr deref in lbmStartIO
bcache: Fixup error handling in register_cache()
xfs: Convert to bdev_open_by_path()
reiserfs: Convert to bdev_open_by_dev/path()
ocfs2: Convert to use bdev_open_by_dev()
nfs/blocklayout: Convert to use bdev_open_by_dev/path()
jfs: Convert to bdev_open_by_dev()
f2fs: Convert to bdev_open_by_dev/path()
ext4: Convert to bdev_open_by_dev()
erofs: Convert to use bdev_open_by_path()
btrfs: Convert to bdev_open_by_path()
fs: Convert to bdev_open_by_dev()
mm/swap: Convert to use bdev_open_by_dev()
...
blk_report_disk_dead() has the following major callers:
(1) del_gendisk()
(2) blk_mark_disk_dead()
Since del_gendisk() acquires disk->open_mutex it's clear that all
callers are assumed to be called without disk->open_mutex held.
In turn, blk_report_disk_dead() is called without disk->open_mutex held
in del_gendisk().
All callers of blk_mark_disk_dead() call it without disk->open_mutex as
well.
Ensure that it is clear that blk_report_disk_dead() is called without
disk->open_mutex on purpose by asserting it and a comment in the code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231017184823.1383356-5-hch@lst.de
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
disk_check_media_change is mostly called from ->open where it makes
little sense to mark the file system on the device as dead, as we
are just opening it. So instead of calling bdev_mark_dead from
disk_check_media_change move it into the few callers that are not
in an open instance. This avoid calling into bdev_mark_dead and
thus taking s_umount with open_mutex held.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231017184823.1383356-4-hch@lst.de
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The logic for disk->open_partitions is:
blkdev_get_by_*()
-> bdev_is_partition()
-> blkdev_get_part()
-> blkdev_get_whole() // bdev_whole->bd_openers++
-> if (part->bd_openers == 0)
disk->open_partitions++
part->bd_openers
In other words, when we first claim/open a partition we increment
disk->open_partitions and only when all part->bd_openers are closed will
disk->open_partitions be zero. That should mean that
disk->open_partitions is always > 0 as long as there's anyone that
has an open partition.
So the check for disk->open_partitions should mean that we can never
remove an active partition that has a holder and holder ops set. Assert
that in the code. The main disk isn't removed so that check doesn't work
for disk->part0 which is what we want. After all we only care about
partition not about the main disk.
Link: https://lore.kernel.org/r/20231017184823.1383356-3-hch@lst.de
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
BLKPG_DEL_PARTITION refuses to delete partitions that still have
openers, i.e., that has an elevated @bdev->bd_openers count. If a device
is claimed by setting @bdev->bd_holder and @bdev->bd_holder_ops
@bdev->bd_openers and @bdev->bd_holders are incremented.
@bdev->bd_openers is effectively guaranteed to be >= @bdev->bd_holders.
So as long as @bdev->bd_openers isn't zero we know that this partition
is still in active use and that there might still be @bdev->bd_holder
and @bdev->bd_holder_ops set.
The only current example is @fs_holder_ops for filesystems. But that
means bdev_mark_dead() which calls into
bdev->bd_holder_ops->mark_dead::fs_bdev_mark_dead() is a nop. As long as
there's an elevated @bdev->bd_openers count we can't delete the
partition and if there isn't an elevated @bdev->bd_openers count then
there's no @bdev->bd_holder or @bdev->bd_holder_ops.
So simply open-code what we need to do. This gets rid of one more
instance where we acquire s_umount under @disk->open_mutex.
Link: https://lore.kernel.org/r/20231016-fototermin-umriss-59f1ea6c1fe6@brauner
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231017184823.1383356-2-hch@lst.de
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The implementation of bdev holder operations such as fs_bdev_mark_dead()
and fs_bdev_sync() grab sb->s_umount semaphore under
bdev->bd_holder_lock. This is problematic because it leads to
disk->open_mutex -> sb->s_umount lock ordering which is counterintuitive
(usually we grab higher level (e.g. filesystem) locks first and lower
level (e.g. block layer) locks later) and indeed makes lockdep complain
about possible locking cycles whenever we open a block device while
holding sb->s_umount semaphore. Implement a function
bdev_super_lock_shared() which safely transitions from holding
bdev->bd_holder_lock to holding sb->s_umount on alive superblock without
introducing the problematic lock dependency. We use this function
fs_bdev_sync() and fs_bdev_mark_dead().
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231018152924.3858-1-jack@suse.cz
Link: https://lore.kernel.org/r/20231017184823.1383356-1-hch@lst.de
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Convert disk_scan_partitions() and blkdev_bszset() to use
bdev_open_by_dev().
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-3-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
Convert blkdev_open() to use bdev_open_by_dev(). To be able to propagate
handle from blkdev_open() to blkdev_release() we need to stop using
existence of file->private_data to determine exclusive block device
opens. Use bdev_handle->mode for this purpose since file->f_flags
isn't usable for this (O_EXCL is cleared from the flags during open).
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-2-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
Create struct bdev_handle that contains all parameters that need to be
passed to blkdev_put() and provide bdev_open_* functions that return
this structure instead of plain bdev pointer. This will eventually allow
us to pass one more argument to blkdev_put() (renamed to bdev_release())
without too much hassle.
Acked-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230927093442.25915-1-jack@suse.cz
Signed-off-by: Christian Brauner <brauner@kernel.org>
Inexact, we may reject some not-overflowing values incorrectly, but
they'll be on the order of exabytes allowed anyways.
This fixes divide error crash on x86 if bps_limit is not configured or
is set too high in the rare case that jiffy_elapsed is greater than HZ.
Fixes: e8368b57c0 ("blk-throttle: use calculate_io/bytes_allowed() for throtl_trim_slice()")
Fixes: 8d6bbaada2 ("blk-throttle: prevent overflow while calculating wait time")
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20231020223617.2739774-1-khazhy@google.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__read_mostly predates __ro_after_init. Many variables which are marked
__read_mostly should have been __ro_after_init from day 1.
Also, mark some stuff as "const" and "__init" while I'm at it.
[akpm@linux-foundation.org: revert sysctl_nr_open_min, sysctl_nr_open_max changes due to arm warning]
[akpm@linux-foundation.org: coding-style cleanups]
Link: https://lkml.kernel.org/r/4f6bb9c0-abba-4ee4-a7aa-89265e886817@p183
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Define operations for SED Opal to read/write keys
from POWER LPAR Platform KeyStore(PLPKS). This allows
non-volatile storage of SED Opal keys.
Signed-off-by: Greg Joyce <gjoyce@linux.vnet.ibm.com>
Reviewed-by: Jonathan Derrick <jonathan.derrick@linux.dev>
Link: https://lore.kernel.org/r/20231004201957.1451669-4-gjoyce@linux.vnet.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Allow for permanent SED authentication keys by
reading/writing to the SED Opal non-volatile keystore.
Signed-off-by: Greg Joyce <gjoyce@linux.vnet.ibm.com>
Reviewed-by: Jonathan Derrick <jonathan.derrick@linux.dev>
Link: https://lore.kernel.org/r/20231004201957.1451669-3-gjoyce@linux.vnet.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The commit 3bfeb61256
introduced the use of keyring for sed-opal.
Unfortunately, there is also a possibility to save
the Opal key used in opal_lock_unlock().
This patch switches the order of operation, so the cached
key is used instead of failure for opal_get_key.
The problem was found by the cryptsetup Opal test recently
added to the cryptsetup tree.
Fixes: 3bfeb61256 ("block: sed-opal: keyring support for SED keys")
Tested-by: Ondrej Kozina <okozina@redhat.com>
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Link: https://lore.kernel.org/r/20231003100209.380037-1-gmazyland@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Only call truncate_bdev_range() if the fallocate mode is supported. This
fixes a bug where data in the pagecache could be invalidated if the
fallocate() was called on the block device with an invalid mode.
Fixes: 25f4c41415 ("block: implement (some of) fallocate for block devices")
Cc: stable@vger.kernel.org
Reported-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Sarthak Kukreti <sarthakkukreti@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Fixes: line? I've never seen those wrapped.
Link: https://lore.kernel.org/r/20231011201230.750105-1-sarthakkukreti@chromium.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The length values for volume label type and volume label id are
hard-coded in several places. Provide defines for those values and
replace all occurrences accordingly.
Note that the length is defined and used, and not the size since the
volume label type string and volume label id string are not
nul-terminated.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20230915131001.697070-4-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
strncpy() is deprecated and needs to be replaced. The volume label
information strings are not nul-terminated and strncpy() can simply be
replaced with memcpy().
To enhance the readability of find_label() alongside this change, the
following improvements are made:
- Introduce the array dasd_vollabels[] containing all information
necessary for the label detection.
- Provide a helper function to obtain an index value corresponding to a
volume label type. This allows the use of a switch statement to reduce
indentation levels.
- The 'temp' variable is used to check against valid volume label types.
In the good case, this variable already contains the volume label type
making it unnecessary to copy the information again from e.g.
label->vol.vollbl. Remove the 'temp' variable and the second copy as
all information are already provided.
- Remove the 'found' variable and replace it with early returns
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20230915131001.697070-3-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The data holding the volume label information is zeroed in case no valid
volume label was found. Since the label information isn't used in that
case, zeroing the data doesn't provide any value whatsoever.
Remove the unnecessary memset() call accordingly.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20230915131001.697070-2-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch removes old code of badblocks_set(), badblocks_clear() and
badblocks_check(), and make them as wrappers to call _badblocks_set(),
_badblocks_clear() and _badblocks_check().
By this change now the badblock handing switch to the improved algorithm
in _badblocks_set(), _badblocks_clear() and _badblocks_check().
This patch only contains the changes of old code deletion, new added
code for the improved algorithms are in previous patches.
Signed-off-by: Coly Li <colyli@suse.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Geliang Tang <geliang.tang@suse.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: NeilBrown <neilb@suse.de>
Cc: Vishal L Verma <vishal.l.verma@intel.com>
Cc: Xiao Ni <xni@redhat.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Acked-by: Geliang Tang <geliang.tang@suse.com>
Link: https://lore.kernel.org/r/20230811170513.2300-7-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch rewrites badblocks_check() with similar coding style as
_badblocks_set() and _badblocks_clear(). The only difference is bad
blocks checking may handle multiple ranges in bad tables now.
If a checking range covers multiple bad blocks range in bad block table,
like the following condition (C is the checking range, E1, E2, E3 are
three bad block ranges in bad block table),
+------------------------------------+
| C |
+------------------------------------+
+----+ +----+ +----+
| E1 | | E2 | | E3 |
+----+ +----+ +----+
The improved badblocks_check() algorithm will divide checking range C
into multiple parts, and handle them in 7 runs of a while-loop,
+--+ +----+ +----+ +----+ +----+ +----+ +----+
|C1| | C2 | | C3 | | C4 | | C5 | | C6 | | C7 |
+--+ +----+ +----+ +----+ +----+ +----+ +----+
+----+ +----+ +----+
| E1 | | E2 | | E3 |
+----+ +----+ +----+
And the start LBA and length of range E1 will be set as first_bad and
bad_sectors for the caller.
The return value rule is consistent for multiple ranges. For example if
there are following bad block ranges in bad block table,
Index No. Start Len Ack
0 400 20 1
1 500 50 1
2 650 20 0
the return value, first_bad, bad_sectors by calling badblocks_set() with
different checking range can be the following values,
Checking Start, Len Return Value first_bad bad_sectors
100, 100 0 N/A N/A
100, 310 1 400 10
100, 440 1 400 10
100, 540 1 400 10
100, 600 -1 400 10
100, 800 -1 400 10
In order to make code review easier, this patch names the improved bad
block range checking routine as _badblocks_check() and does not change
existing badblock_check() code yet. Later patch will delete old code of
badblocks_check() and make it as a wrapper to call _badblocks_check().
Then the new added code won't mess up with the old deleted code, it will
be more clear and easier for code review.
Signed-off-by: Coly Li <colyli@suse.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Geliang Tang <geliang.tang@suse.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: NeilBrown <neilb@suse.de>
Cc: Vishal L Verma <vishal.l.verma@intel.com>
Cc: Xiao Ni <xni@redhat.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Acked-by: Geliang Tang <geliang.tang@suse.com>
Link: https://lore.kernel.org/r/20230811170513.2300-6-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With the fundamental ideas and helper routines from badblocks_set()
improvement, clearing bad block for multiple ranges is much simpler.
With a similar idea from badblocks_set() improvement, this patch
simplifies bad block range clearing into 5 situations. No matter how
complicated the clearing condition is, we just look at the head part
of clearing range with relative already set bad block range from the
bad block table. The rested part will be handled in next run of the
while-loop.
Based on existing helpers added from badblocks_set(), this patch adds
two more helpers,
- front_clear()
Clear the bad block range from bad block table which is front
overlapped with the clearing range.
- front_splitting_clear()
Handle the condition that the clearing range hits middle of an
already set bad block range from bad block table.
Similar as badblocks_set(), the first part of clearing range is handled
with relative bad block range which is find by prev_badblocks(). In most
cases a valid hint is provided to prev_badblocks() to avoid unnecessary
bad block table iteration.
This patch also explains the detail algorithm code comments at beginning
of badblocks.c, including which five simplified situations are
categrized and how all the bad block range clearing conditions are
handled by these five situations.
Again, in order to make the code review easier and avoid the code
changes mixed together, this patch does not modify badblock_clear() and
implement another routine called _badblock_clear() for the improvement.
Later patch will delete current code of badblock_clear() and make it as
a wrapper to _badblock_clear(), so the code change can be much clear for
review.
Signed-off-by: Coly Li <colyli@suse.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Geliang Tang <geliang.tang@suse.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: NeilBrown <neilb@suse.de>
Cc: Vishal L Verma <vishal.l.verma@intel.com>
Cc: Xiao Ni <xni@redhat.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Acked-by: Geliang Tang <geliang.tang@suse.com>
Link: https://lore.kernel.org/r/20230811170513.2300-5-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Recently I received a bug report that current badblocks code does not
properly handle multiple ranges. For example,
badblocks_set(bb, 32, 1, true);
badblocks_set(bb, 34, 1, true);
badblocks_set(bb, 36, 1, true);
badblocks_set(bb, 32, 12, true);
Then indeed badblocks_show() reports,
32 3
36 1
But the expected bad blocks table should be,
32 12
Obviously only the first 2 ranges are merged and badblocks_set() returns
and ignores the rest setting range.
This behavior is improper, if the caller of badblocks_set() wants to set
a range of blocks into bad blocks table, all of the blocks in the range
should be handled even the previous part encountering failure.
The desired way to set bad blocks range by badblocks_set() is,
- Set as many as blocks in the setting range into bad blocks table.
- Merge the bad blocks ranges and occupy as less as slots in the bad
blocks table.
- Fast.
Indeed the above proposal is complicated, especially with the following
restrictions,
- The setting bad blocks range can be acknowledged or not acknowledged.
- The bad blocks table size is limited.
- Memory allocation should be avoided.
The basic idea of the patch is to categorize all possible bad blocks
range setting combinations into much less simplified and more less
special conditions. Inside badblocks_set() there is an implicit loop
composed by jumping between labels 're_insert' and 'update_sectors'. No
matter how large the setting bad blocks range is, in every loop just a
minimized range from the head is handled by a pre-defined behavior from
one of the categorized conditions. The logic is simple and code flow is
manageable.
The different relative layout between the setting range and existing bad
block range are checked and handled (merge, combine, overwrite, insert)
by the helpers in previous patch. This patch is to make all the helpers
work together with the above idea.
This patch only has the algorithm improvement for badblocks_set(). There
are following patches contain improvement for badblocks_clear() and
badblocks_check(). But the algorithm in badblocks_set() is fundamental
and typical, other improvement in clear and check routines are based on
all the helpers and ideas in this patch.
In order to make the change to be more clear for code review, this patch
does not directly modify existing badblocks_set(), and just add a new
one named _badblocks_set(). Later patch will remove current existing
badblocks_set() code and make it as a wrapper of _badblocks_set(). So
the new added change won't be mixed with deleted code, the code review
can be easier.
Signed-off-by: Coly Li <colyli@suse.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Geliang Tang <geliang.tang@suse.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: NeilBrown <neilb@suse.de>
Cc: Vishal L Verma <vishal.l.verma@intel.com>
Cc: Wols Lists <antlists@youngman.org.uk>
Cc: Xiao Ni <xni@redhat.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Acked-by: Geliang Tang <geliang.tang@suse.com>
Link: https://lore.kernel.org/r/20230811170513.2300-4-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch adds several helper routines to improve badblock ranges
handling. These helper routines will be used later in the improved
version of badblocks_set()/badblocks_clear()/badblocks_check().
- Helpers prev_by_hint() and prev_badblocks() are used to find the bad
range from bad table which the searching range starts at or after.
- The following helpers are to decide the relative layout between the
manipulating range and existing bad block range from bad table.
- can_merge_behind()
Return 'true' if the manipulating range can backward merge with the
bad block range.
- can_merge_front()
Return 'true' if the manipulating range can forward merge with the
bad block range.
- can_combine_front()
Return 'true' if two adjacent bad block ranges before the
manipulating range can be merged.
- overlap_front()
Return 'true' if the manipulating range exactly overlaps with the
bad block range in front of its range.
- overlap_behind()
Return 'true' if the manipulating range exactly overlaps with the
bad block range behind its range.
- can_front_overwrite()
Return 'true' if the manipulating range can forward overwrite the
bad block range in front of its range.
- The following helpers are to add the manipulating range into the bad
block table. Different routine is called with the specific relative
layout between the manipulating range and other bad block range in the
bad block table.
- behind_merge()
Merge the manipulating range with the bad block range behind its
range, and return the number of merged length in unit of sector.
- front_merge()
Merge the manipulating range with the bad block range in front of
its range, and return the number of merged length in unit of sector.
- front_combine()
Combine the two adjacent bad block ranges before the manipulating
range into a larger one.
- front_overwrite()
Overwrite partial of whole bad block range which is in front of the
manipulating range. The overwrite may split existing bad block range
and generate more bad block ranges into the bad block table.
- insert_at()
Insert the manipulating range at a specific location in the bad
block table.
All the above helpers are used in later patches to improve the bad block
ranges handling for badblocks_set()/badblocks_clear()/badblocks_check().
Signed-off-by: Coly Li <colyli@suse.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Geliang Tang <geliang.tang@suse.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: NeilBrown <neilb@suse.de>
Cc: Vishal L Verma <vishal.l.verma@intel.com>
Cc: Xiao Ni <xni@redhat.com>
Reviewed-by: Xiao Ni <xni@redhat.com>
Acked-by: Geliang Tang <geliang.tang@suse.com>
Link: https://lore.kernel.org/r/20230811170513.2300-3-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Drop one function parameter's kernel-doc comment since the parameter
was removed. This prevents a kernel-doc warning:
block/disk-events.c:300: warning: Excess function parameter 'events' description in 'disk_force_media_change'
Fixes: ab6860f62b ("block: simplify the disk_force_media_change interface")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: lore.kernel.org/r/202309060957.vfl0mUur-lkp@intel.com
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: linux-block@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230926005232.23666-1-rdunlap@infradead.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now we update driver tags request table in blk_mq_get_driver_tag(),
so the driver that support queue_rqs() have to update that inflight
table by itself.
Move it to blk_mq_start_request(), which is a better place where
we setup the deadline for request timeout check. And it's just
where the request becomes inflight.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230913151616.3164338-5-chengming.zhou@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since active requests have been accounted when allocate driver tags,
we can remove this limit now.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230913151616.3164338-4-chengming.zhou@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Since the previous patch change to only account active requests when
we really allocate the driver tag, the RQF_MQ_INFLIGHT can be removed
and no double account problem.
1. none elevator: flush request will use the first pending request's
driver tag, won't double account.
2. other elevator: flush request will be accounted when allocate driver
tag when issue, and will be unaccounted when it put the driver tag.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230913151616.3164338-3-chengming.zhou@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is a limit that batched queue_rqs() can't work on shared tags
queue, since the account of active requests can't be done there.
Now we account the active requests only in blk_mq_get_driver_tag(),
which is not the time we get driver tag actually (with none elevator).
To support batched queue_rqs() on shared tags queue, we move the
account of active requests to where we get the driver tag:
1. none elevator: blk_mq_get_tags() and blk_mq_get_tag()
2. other elevator: __blk_mq_alloc_driver_tag()
This is clearer and match with the unaccount side, which just happen
when we put the driver tag.
The other good point is that we don't need RQF_MQ_INFLIGHT trick
anymore, which used to avoid double account of flush request.
Now we only account when actually get the driver tag, so all is good.
We will remove RQF_MQ_INFLIGHT in the next patch.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230913151616.3164338-2-chengming.zhou@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The rq_qos_wait calls common wake-up function rq_qos_wake_function to get
token. Just replace stale wbt_wake_function with rq_qos_wake_function in
comment.
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230914091508.36232-1-shikemeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When nr_hw_queues shrink, we free the excess tags before realloc'ing
hw_ctxs for each queue. During that resize, we may need to access those
tags, like blk_mq_tag_idle(hctx) will access queue shared tags.
This can cause a slab use-after-free, as reported by KASAN. Fix it by
moving the releasing of excess tags to the end.
Fixes: e1dd7bc930 ("blk-mq: fix tags leak when shrink nr_hw_queues")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Closes: https://lore.kernel.org/all/CAHj4cs_CK63uoDpGBGZ6DN4OCTpzkR3UaVgK=LX8Owr8ej2ieQ@mail.gmail.com/
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20230908005702.2183908-1-chengming.zhou@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is no need to unpin the added page when adding it to the bio fails
as that is done by the loop below. Instead we want to unpin it when adding
a single page to the bio more than once as bio_release_pages will only
unpin it once.
Fixes: d1916c86cc ("block: move same page handling from __bio_add_pc_page to the callers")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20230905124731.328255-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit a33df75c63 ("block: use an xarray for disk->part_tbl") remove
disk_expand_part_tbl() in add_partition(), which means all kinds of
devices will support extended dynamic `dev_t`.
However, some devices with GENHD_FL_NO_PART are not expected to add or
resize partition.
Fix this by adding check of GENHD_FL_NO_PART before add or resize
partition.
Fixes: a33df75c63 ("block: use an xarray for disk->part_tbl")
Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230831075900.1725842-1-lilingfeng@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
file_remove_privs instantly returns 0 when not called for regular files,
so don't bother.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20230831121911.280155-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, 'carryover_ios/bytes' is not handled in throtl_trim_slice(),
for consequence, 'carryover_ios/bytes' will be used to throttle bio
multiple times, for example:
1) set iops limit to 100, and slice start is 0, slice end is 100ms;
2) current time is 0, and 10 ios are dispatched, those io won't be
throttled and io_disp is 10;
3) still at current time 0, update iops limit to 1000, carryover_ios is
updated to (0 - 10) = -10;
4) in this slice(0 - 100ms), io_allowed = 100 + (-10) = 90, which means
only 90 ios can be dispatched without waiting;
5) assume that io is throttled in slice(0 - 100ms), and
throtl_trim_slice() update silce to (100ms - 200ms). In this case,
'carryover_ios/bytes' is not cleared and still only 90 ios can be
dispatched between 100ms - 200ms.
Fix this problem by updating 'carryover_ios/bytes' in
throtl_trim_slice().
Fixes: a880ae93e5 ("blk-throttle: fix io hung due to configuration updates")
Reported-by: zhuxiaohui <zhuxiaohui.400@bytedance.com>
Link: https://lore.kernel.org/all/20230812072116.42321-1-zhuxiaohui.400@bytedance.com/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230816012708.1193747-5-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
carryover_ios/bytes[] can be negative in the case that ios are
dispatched in the slice in advance, and then configuration is updated.
For example:
1) set iops limit to 1000, and slice start is 0, slice end is 100ms;
2) current time is 0, and 100 ios are dispatched, those ios will not be
throttled, hence io_disp is 100;
3) still at current time 0, update iops limit to 100, then carryover_ios
is (0 - 100) = -100;
4) then, dispatch a new io at time 0, the expected result is that this
io will wait for 1s. The calculation in tg_within_iops_limit:
io_disp = 0;
io_allowed = calculate_io_allowed + carryover_ios
= 10 + (-100) = -90;
io won't be throttled if (io_disp + 1 < io_allowed) passed.
Before this patch, in step 4) (io_disp + 1 < io_allowed) is passed,
because -90 for unsigned value is very huge, and such io won't be
throttled.
Fix this problem by checking if 'io/bytes_allowed' is negative first.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230816012708.1193747-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
'carryover_bytes/ios' can be negative, indicate that some bio is
dispatched in advance within slice while configuration is updated.
Print a huge value is not user-friendly.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230816012708.1193747-2-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=p1bd
-----END PGP SIGNATURE-----
Merge tag 'for-6.6/block-2023-08-28' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
"Pretty quiet round for this release. This contains:
- Add support for zoned storage to ublk (Andreas, Ming)
- Series improving performance for drivers that mark themselves as
needing a blocking context for issue (Bart)
- Cleanup the flush logic (Chengming)
- sed opal keyring support (Greg)
- Fixes and improvements to the integrity support (Jinyoung)
- Add some exports for bcachefs that we can hopefully delete again in
the future (Kent)
- deadline throttling fix (Zhiguo)
- Series allowing building the kernel without buffer_head support
(Christoph)
- Sanitize the bio page adding flow (Christoph)
- Write back cache fixes (Christoph)
- MD updates via Song:
- Fix perf regression for raid0 large sequential writes (Jan)
- Fix split bio iostat for raid0 (David)
- Various raid1 fixes (Heinz, Xueshi)
- raid6test build fixes (WANG)
- Deprecate bitmap file support (Christoph)
- Fix deadlock with md sync thread (Yu)
- Refactor md io accounting (Yu)
- Various non-urgent fixes (Li, Yu, Jack)
- Various fixes and cleanups (Arnd, Azeem, Chengming, Damien, Li,
Ming, Nitesh, Ruan, Tejun, Thomas, Xu)"
* tag 'for-6.6/block-2023-08-28' of git://git.kernel.dk/linux: (113 commits)
block: use strscpy() to instead of strncpy()
block: sed-opal: keyring support for SED keys
block: sed-opal: Implement IOC_OPAL_REVERT_LSP
block: sed-opal: Implement IOC_OPAL_DISCOVERY
blk-mq: prealloc tags when increase tagset nr_hw_queues
blk-mq: delete redundant tagset map update when fallback
blk-mq: fix tags leak when shrink nr_hw_queues
ublk: zoned: support REQ_OP_ZONE_RESET_ALL
md: raid0: account for split bio in iostat accounting
md/raid0: Fix performance regression for large sequential writes
md/raid0: Factor out helper for mapping and submitting a bio
md raid1: allow writebehind to work on any leg device set WriteMostly
md/raid1: hold the barrier until handle_read_error() finishes
md/raid1: free the r1bio before waiting for blocked rdev
md/raid1: call free_r1bio() before allow_barrier() in raid_end_bio_io()
blk-cgroup: Fix NULL deref caused by blkg_policy_data being installed before init
drivers/rnbd: restore sysfs interface to rnbd-client
md/raid5-cache: fix null-ptr-deref for r5l_flush_stripe_to_raid()
raid6: test: only check for Altivec if building on powerpc hosts
raid6: test: make sure all intermediate and artifact files are .gitignored
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZOXpbgAKCRCRxhvAZXjc
oi8PAQCtXelGZHmTcmevsO8p4Qz7hFpkonZ/TnxKf+RdnlNgPgD+NWi+LoRBpaAj
xk4z8SqJaTTP4WXrG5JZ6o7EQkUL8gE=
=2e9I
-----END PGP SIGNATURE-----
Merge tag 'v6.6-vfs.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull superblock updates from Christian Brauner:
"This contains the super rework that was ready for this cycle. The
first part changes the order of how we open block devices and allocate
superblocks, contains various cleanups, simplifications, and a new
mechanism to wait on superblock state changes.
This unblocks work to ultimately limit the number of writers to a
block device. Jan has already scheduled follow-up work that will be
ready for v6.7 and allows us to restrict the number of writers to a
given block device. That series builds on this work right here.
The second part contains filesystem freezing updates.
Overview:
The generic superblock changes are rougly organized as follows
(ignoring additional minor cleanups):
(1) Removal of the bd_super member from struct block_device.
This was a very odd back pointer to struct super_block with
unclear rules. For all relevant places we have other means to get
the same information so just get rid of this.
(2) Simplify rules for superblock cleanup.
Roughly, everything that is allocated during fs_context
initialization and that's stored in fs_context->s_fs_info needs
to be cleaned up by the fs_context->free() implementation before
the superblock allocation function has been called successfully.
After sget_fc() returned fs_context->s_fs_info has been
transferred to sb->s_fs_info at which point sb->kill_sb() if
fully responsible for cleanup. Adhering to these rules means that
cleanup of sb->s_fs_info in fill_super() is to be avoided as it's
brittle and inconsistent.
Cleanup shouldn't be duplicated between sb->put_super() as
sb->put_super() is only called if sb->s_root has been set aka
when the filesystem has been successfully born (SB_BORN). That
complexity should be avoided.
This also means that block devices are to be closed in
sb->kill_sb() instead of sb->put_super(). More details in the
lower section.
(3) Make it possible to lookup or create a superblock before opening
block devices
There's a subtle dependency on (2) as some filesystems did rely
on fill_super() to be called in order to correctly clean up
sb->s_fs_info. All these filesystems have been fixed.
(4) Switch most filesystem to follow the same logic as the generic
mount code now does as outlined in (3).
(5) Use the superblock as the holder of the block device. We can now
easily go back from block device to owning superblock.
(6) Export and extend the generic fs_holder_ops and use them as
holder ops everywhere and remove the filesystem specific holder
ops.
(7) Call from the block layer up into the filesystem layer when the
block device is removed, allowing to shut down the filesystem
without risk of deadlocks.
(8) Get rid of get_super().
We can now easily go back from the block device to owning
superblock and can call up from the block layer into the
filesystem layer when the device is removed. So no need to wade
through all registered superblock to find the owning superblock
anymore"
Link: https://lore.kernel.org/lkml/20230824-prall-intakt-95dbffdee4a0@brauner/
* tag 'v6.6-vfs.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (47 commits)
super: use higher-level helper for {freeze,thaw}
super: wait until we passed kill super
super: wait for nascent superblocks
super: make locking naming consistent
super: use locking helpers
fs: simplify invalidate_inodes
fs: remove get_super
block: call into the file system for ioctl BLKFLSBUF
block: call into the file system for bdev_mark_dead
block: consolidate __invalidate_device and fsync_bdev
block: drop the "busy inodes on changed media" log message
dasd: also call __invalidate_device when setting the device offline
amiflop: don't call fsync_bdev in FDFMTBEG
floppy: call disk_force_media_change when changing the format
block: simplify the disk_force_media_change interface
nbd: call blk_mark_disk_dead in nbd_clear_sock_ioctl
xfs use fs_holder_ops for the log and RT devices
xfs: drop s_umount over opening the log and RT devices
ext4: use fs_holder_ops for the log device
ext4: drop s_umount over opening the log device
...
* Allow the kernel to initiate a freeze of a filesystem. The kernel
and userspace can both hold a freeze on a filesystem at the same
time; the freeze is not lifted until /both/ holders lift it. This
will enable us to fix a longstanding bug in XFS online fsck.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZLVnJwAKCRBKO3ySh0YR
pqVIAP9u9CZEJ2Zcc7YpBj1MLUQGr2xBmz8RJEVJbQHKVgYcQwEA9BNb4eH4i2Af
K7Qp0OGNgyzZw37lN23Uf/SDuBK2QgM=
=seMl
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZOXo2AAKCRCRxhvAZXjc
ojDfAQDguc2saF8WLeXtn2O0pGOW8vTrhpwiFHNI6hwdzf07/AD+LGBpFEqYKyX5
NHPzdR7YYpJoTsQzR4JFJVZqN9Q1xgU=
=wDq0
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.6-merge-2' of ssh://gitolite.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull filesystem freezing updates from Darrick Wong:
New code for 6.6:
* Allow the kernel to initiate a freeze of a filesystem. The kernel
and userspace can both hold a freeze on a filesystem at the same
time; the freeze is not lifted until /both/ holders lift it. This
will enable us to fix a longstanding bug in XFS online fsck.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Message-Id: <20230822182604.GB11286@frogsfrogsfrogs>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The implementation of strscpy() is more robust and safer.
That's now the recommended way to copy NUL terminated strings.
Signed-off-by: Xu Panda <xu.panda@zte.com.cn>
Signed-off-by: Yang Yang <yang.yang29@zte.com>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/202212031422587503771@zte.com.cn
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Extend the SED block driver so it can alternatively
obtain a key from a sed-opal kernel keyring. The SED
ioctls will indicate the source of the key, either
directly in the ioctl data or from the keyring.
This allows the use of SED commands in scripts such as
udev scripts so that drives may be automatically unlocked
as they become available.
Signed-off-by: Greg Joyce <gjoyce@linux.vnet.ibm.com>
Reviewed-by: Jonathan Derrick <jonathan.derrick@linux.dev>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/r/20230721211534.3437070-4-gjoyce@linux.vnet.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is used in conjunction with IOC_OPAL_REVERT_TPR to return a drive to
Original Factory State without erasing the data. If IOC_OPAL_REVERT_LSP
is called with opal_revert_lsp.options bit OPAL_PRESERVE set prior
to calling IOC_OPAL_REVERT_TPR, the drive global locking range will not
be erased.
Signed-off-by: Greg Joyce <gjoyce@linux.vnet.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jonathan Derrick <jonathan.derrick@linux.dev>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/r/20230721211534.3437070-3-gjoyce@linux.vnet.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add IOC_OPAL_DISCOVERY ioctl to return raw discovery data to a SED Opal
application. This allows the application to display drive capabilities
and state.
Signed-off-by: Greg Joyce <gjoyce@linux.vnet.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jonathan Derrick <jonathan.derrick@linux.dev>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/r/20230721211534.3437070-2-gjoyce@linux.vnet.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just like blk_mq_alloc_tag_set(), it's better to prepare all tags before
using to map to queue ctxs in blk_mq_map_swqueue(), which now have to
consider empty set->tags[].
The good point is that we can fallback easily if increasing nr_hw_queues
fail, instead of just mapping to hctx[0] when fail in blk_mq_map_swqueue().
And the fallback path already has tags free & clean handling, so all
is good.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230821095602.70742-3-chengming.zhou@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When we increase nr_hw_queues fail, the fallback path will use
blk_mq_update_queue_map() to clear and update all maps.
Obviously, this line of update of HCTX_TYPE_DEFAULT only is not
needed, so delete it.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230821095602.70742-2-chengming.zhou@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Although we don't need to realloc set->tags[] when shrink nr_hw_queues,
we need to free them. Or these tags will be leaked.
How to reproduce:
1. mount -t configfs configfs /mnt
2. modprobe null_blk nr_devices=0 submit_queues=8
3. mkdir /mnt/nullb/nullb0
4. echo 1 > /mnt/nullb/nullb0/power
5. echo 4 > /mnt/nullb/nullb0/submit_queues
6. rmdir /mnt/nullb/nullb0
In step 4, will alloc 9 tags (8 submit queues and 1 poll queue), then
in step 5, new_nr_hw_queues = 5 (4 submit queues and 1 poll queue).
At last in step 6, only these 5 tags are freed, the other 4 tags leaked.
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230821095602.70742-1-chengming.zhou@linux.dev
Signed-off-by: Jens Axboe <axboe@kernel.dk>
