Fix the following sparse warning:
net/sunrpc/xprtrdma/transport.c:71:14: warning: symbol 'xprt_rdma_slot_table_entries'
was not declared. Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Use the following command to test nfsv4(size of file1M is 1MB):
mount -t nfs -o vers=4.0,actimeo=60 127.0.0.1/dir1 /mnt
cp file1M /mnt
du -h /mnt/file1M -->0 within 60s, then 1M
When write is done(cp file1M /mnt), will call this:
nfs_writeback_done
nfs4_write_done
nfs4_write_done_cb
nfs_writeback_update_inode
nfs_post_op_update_inode_force_wcc_locked(change, ctime, mtime
nfs_post_op_update_inode_force_wcc_locked
nfs_set_cache_invalid
nfs_refresh_inode_locked
nfs_update_inode
nfsd write response contains change, ctime, mtime, the flag will be
clear after nfs_update_inode. Howerver, write response does not contain
space_used, previous open response contains space_used whose value is 0,
so inode->i_blocks is still 0.
nfs_getattr -->called by "du -h"
do_update |= force_sync || nfs_attribute_cache_expired -->false in 60s
cache_validity = READ_ONCE(NFS_I(inode)->cache_validity)
do_update |= cache_validity & (NFS_INO_INVALID_ATTR -->false
if (do_update) {
__nfs_revalidate_inode
}
Within 60s, does not send getattr request to nfsd, thus "du -h /mnt/file1M"
is 0.
Add a NFS_INO_INVALID_BLOCKS flag, set it when nfsv4 write is done.
Fixes: 16e1437517 ("NFS: More fine grained attribute tracking")
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The variable result is being initialized with a value that is never read
and it is being updated later with a new value. The initialization is
redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
When I cat parameter
'/sys/module/sunrpc/parameters/auth_hashtable_size', it displays as
follows. It is better to add a newline for easy reading.
[root@hulk-202 ~]# cat /sys/module/sunrpc/parameters/auth_hashtable_size
16[root@hulk-202 ~]#
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
A short read can generate an -EIO error without there being an error
on the wire. This tracepoint acts as an eyecatcher when there is no
obvious I/O error.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
When sunrpc trace points are not enabled, the recorded task ID
information alone is not helpful.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Move the RPC_TASK_SOFTCONN flag into rpc_call_null_helper(). The
only minor behavior change is that it is now also set when
destroying GSS contexts.
This gives a better guarantee that gss_send_destroy_context() will
not hang for long if a connection cannot be established.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up.
All of rpc_call_null_helper() call sites assert RPC_TASK_SOFT, so
move that setting into rpc_call_null_helper() itself.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up.
Commit a52458b48a ("NFS/NFSD/SUNRPC: replace generic creds with
'struct cred'.") made rpc_call_null_helper() set RPC_TASK_NULLCREDS
unconditionally. Therefore there's no need for
rpc_call_null_helper()'s call sites to set RPC_TASK_NULLCREDS.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The "create" tracepoint records parts of the rpc_create arguments,
and the shutdown tracepoint records when the rpc_clnt is about to
signal pending tasks and destroy auths.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Refactor: Hoist create/destroy/disconnect tracepoints out of
xprtrdma and into the generic RPC client. Some benefits include:
- Enable tracing of xprt lifetime events for the socket transport
types
- Expose the different types of disconnect to help run down
issues with lingering connections
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
To help tie the recorded xdr_buf to a particular RPC transaction,
the client side version of this class should display task ID
information and the server side one should show the request's XID.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Add a tracepoint in another common exit point for failing RPCs.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Clean up: remove unnecessary commas, and fix a white-space nit.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Recent additions to the RPC_TASK flags neglected to update
the tracepoint ENUM definitions.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Avoid unnecessary cache sloshing by placing the buffer size
estimation update logic behind an atomic bit flag.
The size of GSS information included in each wrapped Reply does
not change during the lifetime of a GSS context. Therefore, the
au_rslack and au_ralign fields need to be updated only once after
establishing a fresh GSS credential.
Thus a slack size update must occur after a cred is created,
duplicated, renewed, or expires. I'm not sure I have this exactly
right. A trace point is introduced to track updates to these
variables to enable troubleshooting the problem if I missed a spot.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
- Keep nfsd clients from unnecessarily breaking their own delegations:
Note this requires a small kthreadd addition, discussed at:
https://lore.kernel.org/r/1588348912-24781-1-git-send-email-bfields@redhat.com
The result is Tejun Heo's suggestion, and he was OK with this going
through my tree.
- Patch nfsd/clients/ to display filenames, and to fix byte-order when
displaying stateid's.
- fix a module loading/unloading bug, from Neil Brown.
- A big series from Chuck Lever with RPC/RDMA and tracing improvements,
and lay some groundwork for RPC-over-TLS.
Note Stephen Rothwell spotted two conflicts in linux-next. Both should
be straightforward:
include/trace/events/sunrpc.h
https://lore.kernel.org/r/20200529105917.50dfc40f@canb.auug.org.au
net/sunrpc/svcsock.c
https://lore.kernel.org/r/20200529131955.26c421db@canb.auug.org.au
-----BEGIN PGP SIGNATURE-----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=YEf0
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.8' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"Highlights:
- Keep nfsd clients from unnecessarily breaking their own
delegations.
Note this requires a small kthreadd addition. The result is Tejun
Heo's suggestion (see link), and he was OK with this going through
my tree.
- Patch nfsd/clients/ to display filenames, and to fix byte-order
when displaying stateid's.
- fix a module loading/unloading bug, from Neil Brown.
- A big series from Chuck Lever with RPC/RDMA and tracing
improvements, and lay some groundwork for RPC-over-TLS"
Link: https://lore.kernel.org/r/1588348912-24781-1-git-send-email-bfields@redhat.com
* tag 'nfsd-5.8' of git://linux-nfs.org/~bfields/linux: (49 commits)
sunrpc: use kmemdup_nul() in gssp_stringify()
nfsd: safer handling of corrupted c_type
nfsd4: make drc_slab global, not per-net
SUNRPC: Remove unreachable error condition in rpcb_getport_async()
nfsd: Fix svc_xprt refcnt leak when setup callback client failed
sunrpc: clean up properly in gss_mech_unregister()
sunrpc: svcauth_gss_register_pseudoflavor must reject duplicate registrations.
sunrpc: check that domain table is empty at module unload.
NFSD: Fix improperly-formatted Doxygen comments
NFSD: Squash an annoying compiler warning
SUNRPC: Clean up request deferral tracepoints
NFSD: Add tracepoints for monitoring NFSD callbacks
NFSD: Add tracepoints to the NFSD state management code
NFSD: Add tracepoints to NFSD's duplicate reply cache
SUNRPC: svc_show_status() macro should have enum definitions
SUNRPC: Restructure svc_udp_recvfrom()
SUNRPC: Refactor svc_recvfrom()
SUNRPC: Clean up svc_release_skb() functions
SUNRPC: Refactor recvfrom path dealing with incomplete TCP receives
SUNRPC: Replace dprintk() call sites in TCP receive path
...
The Rockchip Video Decoder driver is expecting that the values in a
scaling list are in zig-zag order and applies the inverse scanning process
to get the values in matrix order.
Commit 0b0393d59e ("media: uapi: h264: clarify expected
scaling_list_4x4/8x8 order") clarified that the values in the scaling list
should already be in matrix order.
Fix this by removing the reordering and change to use two memcpy.
Fixes: cd33c83044 ("media: rkvdec: Add the rkvdec driver")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
[hverkuil-cisco@xs4all.nl: rkvdec_scaling_matrix -> rkvdec_h264_scaling_list]
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Wrong loop filter flag is unset when tiles enabled flag is not set,
this cause HEVC decoding issues with Rockchip Video Decoder.
Fix this by unsetting the loop filter across tiles enabled flag instead of
the pps loop filter across slices enabled flag when tiles are disabled.
Fixes: 256fa39208 ("media: v4l: Add definitions for HEVC stateless decoding")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Commit 9495b7e92f ("driver core: platform:
Initialize dma_parms for platform devices") in v5.7-rc5 causes
vb2_dma_contig_clear_max_seg_size() to kfree memory that was not
allocated by vb2_dma_contig_set_max_seg_size().
The assumption in vb2_dma_contig_set_max_seg_size() seems to be that
dev->dma_parms is always NULL when the driver is probed, and the case
where dev->dma_parms has bee initialized by someone else than the driver
(by calling vb2_dma_contig_set_max_seg_size) will cause a failure.
All the current users of these functions are platform devices, which now
always have dma_parms set by the driver core. To fix the issue for v5.7,
make vb2_dma_contig_set_max_seg_size() return an error if dma_parms is
NULL to be on the safe side, and remove the kfree code from
vb2_dma_contig_clear_max_seg_size().
For v5.8 we should remove the two functions and move the
dma_set_max_seg_size() calls into the drivers.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Fixes: 9495b7e92f ("driver core: platform: Initialize dma_parms for platform devices")
Cc: stable@vger.kernel.org
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Remove description of non-existing v4l2_subdev.nevents and replace the
undefined flag V4L2_SUBDEV_USES_EVENTS by the correct flag
V4L2_SUBDEV_FL_HAS_EVENTS, which is already documented in v4l2_subdev.flags
Fixes: commit 02adb1cc76 ("[media] v4l: subdev: Events support")
Signed-off-by: Michael Rodin <mrodin@de.adit-jv.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Commit 9495b7e92f ("driver core: platform: Initialize dma_parms for
platform devices") in v5.7-rc5 added allocation of dma_parms structure to
all platform devices. Then vb2_dma_contig_set_max_seg_size() have been
changed not to allocate dma_parms structure and rely on the one allocated
by the device core. Lets allocate the needed structure also for the
devices created for the 2 MFC device memory ports.
Reported-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Fixes: 9495b7e92f ("driver core: platform: Initialize dma_parms for platform devices")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Recently, MEDIA_CEC_SUPPORT became indepedent of MEDIA_SUPPORT.
However, if MEDIA_SUPPORT is not enabled, MEDIA_SUPPORT_FILTER is not
defined, and MEDIA_CEC_SUPPORT is thus enabled by default, which is not
desirable.
Fix this by adding a dependency on MEDIA_CEC_SUPPORT to the default
configuration.
Fixes: 46d2a3b964 ("media: place CEC menu before MEDIA_SUPPORT")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This allows the VE clocks and PLL_VE to be disabled most of the time.
A runtime PM reference is held while streaming.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Previously, the output format was programmed as part of the ioctl()
handler. However, this has two problems:
1) If there are multiple active streams with different output
formats, the hardware will use whichever format was set last
for both streams. Similarly, an ioctl() done in an inactive
context will wrongly affect other active contexts.
2) The registers are written while the device is not actively
streaming. To enable runtime PM tied to the streaming state,
all hardware access needs to be moved inside cedrus_device_run().
The call to cedrus_dst_format_set() is now placed just before the
codec-specific callback that programs the hardware.
Cc: <stable@vger.kernel.org>
Fixes: 50e761516f ("media: platform: Add Cedrus VPU decoder driver")
Suggested-by: Jernej Skrabec <jernej.skrabec@siol.net>
Suggested-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Tested-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
As there are several ways where the driver could possible
retrieve sensor data, make the prints clearer about what
was detected and from where.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Now that the EFI _DSM table is parsed by the driver, we don't
need a DMI match anymore for Asus Transform T101HA.
This reverts commit 0a76fd8e8d.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This reverts commit 0d64e94205.
As gmin_subdev_add() now takes the ACPI handle directly,
we can deprecate the code that were doing this inside each
I2C driver.
PS.: This also reverts commit c03496b3bd ("media: atomisp: add a notice about possible leak resources")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Instead of keep hardcoding device-specific tables, read them
directly from the ACPI BIOS, if available.
This method is know to work with Asus T101HA device. the
same table is also visible on EzPad devices. So, it seems
that at least some BIOSes use this method to pass data about
ISP2401-connected sensors.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The hive_isp_css_custom_host_hrt.h code, together
with atomisp_helper.h, provides an abstraction layer for
some functions inside atomisp_compat_css20.c and atomisp_cmd.c.
There's no good reason for that. In a matter of fact, after
removing the abstraction, the code looked a lot cleaner
and easier to understand.
So, get rid of them.
While here, get rid also of the udelay(1) abstraction code.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Some parts of the driver have their own implementation of
memcpy() & friends. Replace all of them by strscpy().
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Replace usages of strcpy(), strlcpy() and strncpy() in favor
of strscpy().
Suggested-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
If the sensor doesn't implement support for g_frame_interval,
it won't return the expected fps rate.
Instead of keeping DFS on its minimal value (which will likely
not work), set it to the max.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There are several parts of the driver that could produce
a "dfs failed!" message. Change the texts, in order to help
identifying from where they're coming.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Instead of having a static var to detect it, let's use the
already-existing arch-specific bytes, as this is how other
parts of the code also checks when it needs to do something
different, depending on an specific chipset version.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Instead of hardcoding the intel family values there, use
the already defined ones from asm/intel-family.h.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The logic which sets the hpll_freq for BYT sets hpll_freq
to 1600MHz, but ignores it, and sets it again after reading
from-device-specific EFI vars (this time, using a default
of 2000MHz).
Remove the first set, as this will be overriden anyway.
While here, do minor adjustments on comments and on a
printk message.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There's a hack at the driver that selects a different table
for a BYT tablet, which sets the maximum frequency to 320 MHz,
instead of 400 MHz.
After looking at the Intel Aero Yocto's version from:
https://download.01.org/aero/deb/pool/main/l/linux-4.4.76-aero-1.3/
It was noticed that this depends on an Android-specific modprobe parameter,
which uses a macro (INTEL_MID_BOARD) from this file:
arch/x86/include/asm/spid.h
>From the comments there, it looks like this macro parses a
variable passed at boot time:
cmdline : androidboot.spid=vend:cust:manu:plat:prod:hard
The devices in question are identified there as:
INTEL_BYT_TABLET_BLK_PRO = 0x0000
INTEL_BYT_TABLET_BLK_ENG = 0x8000
Well, this is something that we don't have upstream. So,
without further details about that, we can't really parse it.
If we ever end supporting those devices with the upstream driver,
this patch can be reverted and the device can be detected
via DMI (or maybe via PCI ID?).
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
As both isp2400 and isp2401 files are identical, remove one
of them and remove the test for ISP variant.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There are some parameters that are different between
isp2400 and isp2401. None of those are actually used.
So, get rid of them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There are lots of mess with IRQ ifdef settings. As the
*_global.h will already detect the type of IRQ system at
compile time, we can get rid of them, replacing by just
one ifdef for ISP2401.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The contents of hive_isp_css_2401_irq_types_hrt.h and
hive_isp_css_common/irq_global.h are identical, except for
one unused enum:
On isp2401, this IRQ line has this name:
hrt_isp_css_irq_is2401 = HIVE_GP_DEV_IRQ_ISP_PMEM_ERROR_BIT_ID,
While the same bit is named as:
hrt_isp_css_irq_isp_pmem_error = HIVE_GP_DEV_IRQ_ISP_PMEM_ERROR_BIT_ID,
At the isp2400 version.
Remove one of them, in order to reduce the code differences
between those two versions.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
- Get rid of typedefs;
- Get rid of a duplicated enum type with different names for
ISP2400 and ISP2401;
- adjust indentation on the touched code.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
There's a different table for some BYT variants that depend
on something inside a FIXME ifdef.
Place this also inside it, just to shut up a clang-11 warning.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The abstraction layer for kvfree() was removed, but there
is still a left-over code there.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
