Commit Graph

220 Commits

Author SHA1 Message Date
Filipe Manana
1a1a8b732c Btrfs: fix race setting block group back to RW mode during device replace
After it finishes processing a device extent, the device replace code sets
back the block group to RW mode and then after that it sets the left cursor
to match the logical end address of the block group, so that future writes
into extents belonging to the block group go both the source (old) and
target (new) devices. However from the moment we turn the block group
back to RW mode we have a short time window, that lasts until we update
the left cursor's value, where extents can be allocated from the block
group and written to, in which case they will not be copied/written to
the target (new) device. Fix this by updating the left cursor's value
before turning the block group back to RW mode.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
2016-05-30 12:58:24 +01:00
Filipe Manana
81e87a736c Btrfs: fix unprotected assignment of the left cursor for device replace
We were assigning new values to fields of the device replace object
without holding the respective lock after processing each device extent.
This is important for the left cursor field which can be accessed by a
concurrent task running __btrfs_map_block (which, correctly, takes the
device replace lock).
So change these fields while holding the device replace lock.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
2016-05-30 12:58:23 +01:00
Filipe Manana
f0e9b7d640 Btrfs: fix race setting block group readonly during device replace
When we do a device replace, for each device extent we find from the
source device, we set the corresponding block group to readonly mode to
prevent writes into it from happening while we are copying the device
extent from the source to the target device. However just before we set
the block group to readonly mode some concurrent task might have already
allocated an extent from it or decided it could perform a nocow write
into one of its extents, which can make the device replace process to
miss copying an extent since it uses the extent tree's commit root to
search for extents and only once it finishes searching for all extents
belonging to the block group it does set the left cursor to the logical
end address of the block group - this is a problem if the respective
ordered extents finish while we are searching for extents using the
extent tree's commit root and no transaction commit happens while we
are iterating the tree, since it's the delayed references created by the
ordered extents (when they complete) that insert the extent items into
the extent tree (using the non-commit root of course).
Example:

          CPU 1                                            CPU 2

 btrfs_dev_replace_start()
   btrfs_scrub_dev()
     scrub_enumerate_chunks()
       --> finds device extent belonging
           to block group X

                               <transaction N starts>

                                                      starts buffered write
                                                      against some inode

                                                      writepages is run against
                                                      that inode forcing dellaloc
                                                      to run

                                                      btrfs_writepages()
                                                        extent_writepages()
                                                          extent_write_cache_pages()
                                                            __extent_writepage()
                                                              writepage_delalloc()
                                                                run_delalloc_range()
                                                                  cow_file_range()
                                                                    btrfs_reserve_extent()
                                                                      --> allocates an extent
                                                                          from block group X
                                                                          (which is not yet
                                                                           in RO mode)
                                                                    btrfs_add_ordered_extent()
                                                                      --> creates ordered extent Y
                                                        flush_epd_write_bio()
                                                          --> bio against the extent from
                                                              block group X is submitted

       btrfs_inc_block_group_ro(bg X)
         --> sets block group X to readonly

       scrub_chunk(bg X)
         scrub_stripe(device extent from srcdev)
           --> keeps searching for extent items
               belonging to the block group using
               the extent tree's commit root
           --> it never blocks due to
               fs_info->scrub_pause_req as no
               one tries to commit transaction N
           --> copies all extents found from the
               source device into the target device
           --> finishes search loop

                                                        bio completes

                                                        ordered extent Y completes
                                                        and creates delayed data
                                                        reference which will add an
                                                        extent item to the extent
                                                        tree when run (typically
                                                        at transaction commit time)

                                                          --> so the task doing the
                                                              scrub/device replace
                                                              at CPU 1 misses this
                                                              and does not copy this
                                                              extent into the new/target
                                                              device

       btrfs_dec_block_group_ro(bg X)
         --> turns block group X back to RW mode

       dev_replace->cursor_left is set to the
       logical end offset of block group X

So fix this by waiting for all cow and nocow writes after setting a block
group to readonly mode.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
2016-05-30 12:58:21 +01:00
David Sterba
42f31734eb Merge branch 'cleanups-4.7' into for-chris-4.7-20160525 2016-05-25 22:51:03 +02:00
Nicholas D Steeves
0132761017 btrfs: fix string and comment grammatical issues and typos
Signed-off-by: Nicholas D Steeves <nsteeves@gmail.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2016-05-25 22:35:14 +02:00
Zhao Lei
f1fee6534d btrfs: scrub: Set bbio to NULL before calling btrfs_map_block
We usually call btrfs_put_bbio() when btrfs_map_block() failed,
btrfs_put_bbio() works right whether bbio is a valid value, or NULL.

But there is a exception, in some case, btrfs_map_block() will return
fail without touching *bbio(keeping its original value), and if bbio
was not initialized yet, invalid memory accessing will happened.

Above case is in scrub_missing_raid56_pages(), and similar case in
scrub_raid56_parity().

Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2016-05-25 22:15:21 +02:00
Scott Talbert
4673272f43 btrfs: fix memory leak during RAID 5/6 device replacement
A 'struct bio' is allocated in scrub_missing_raid56_pages(), but it was never
freed anywhere.

Signed-off-by: Scott Talbert <scott.talbert@hgst.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2016-05-16 10:17:58 +02:00
Ashish Samant
2473114981 btrfs: Fix BUG_ON condition in scrub_setup_recheck_block()
pagev array in scrub_block{} is of size SCRUB_MAX_PAGES_PER_BLOCK.
page_index should be checked with the same to trigger BUG_ON().

Signed-off-by: Ashish Samant <ashish.samant@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2016-05-06 15:22:49 +02:00
Liu Bo
3d8da67817 Btrfs: fix divide error upon chunk's stripe_len
The struct 'map_lookup' uses type int for @stripe_len, while
btrfs_chunk_stripe_len() can return a u64 value, and it may end up with
@stripe_len being undefined value and it can lead to 'divide error' in
 __btrfs_map_block().

This changes 'map_lookup' to use type u64 for stripe_len, also right now
we only use BTRFS_STRIPE_LEN for stripe_len, so this adds a valid checker for
BTRFS_STRIPE_LEN.

Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Reported-by: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ folded division fix to scrub_raid56_parity ]
Signed-off-by: David Sterba <dsterba@suse.com>
2016-05-06 15:22:49 +02:00
David Sterba
e6c11f9a46 btrfs: reuse existing variable in scrub_stripe, reduce stack usage
The key variable occupies 17 bytes, the key_start is used once, we can
simply reuse existing 'key' for that purpose. As the key is not a simple
type, compiler doest not do it on itself.

Signed-off-by: David Sterba <dsterba@suse.com>
2016-05-06 15:22:49 +02:00
David Sterba
91166212e0 btrfs: sink gfp parameter to clear_extent_bits
Callers pass GFP_NOFS and GFP_KERNEL. No need to pass the flags around.

Signed-off-by: David Sterba <dsterba@suse.com>
2016-04-29 11:01:47 +02:00
David Sterba
ceeb0ae7bf btrfs: sink gfp parameter to set_extent_bits
All callers pass GFP_NOFS.

Signed-off-by: David Sterba <dsterba@suse.com>
2016-04-29 11:01:47 +02:00
Kirill A. Shutemov
09cbfeaf1a mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.

This promise never materialized.  And unlikely will.

We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE.  And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.

Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.

Let's stop pretending that pages in page cache are special.  They are
not.

The changes are pretty straight-forward:

 - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;

 - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};

 - page_cache_get() -> get_page();

 - page_cache_release() -> put_page();

This patch contains automated changes generated with coccinelle using
script below.  For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.

The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.

There are few places in the code where coccinelle didn't reach.  I'll
fix them manually in a separate patch.  Comments and documentation also
will be addressed with the separate patch.

virtual patch

@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E

@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT

@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE

@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK

@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)

@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)

@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-04 10:41:08 -07:00
Dan Carpenter
07c9a8e077 btrfs: scrub: silence an uninitialized variable warning
It's basically harmless if "ref_level" isn't initialized since it's only
used for an error message, but it causes a static checker warning.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2016-03-11 17:21:59 +01:00
David Sterba
675d276b32 Merge branch 'foreign/liubo/replace-lockup' into for-chris-4.6 2016-02-26 15:38:32 +01:00
Liu Bo
73beece9ca Btrfs: fix lockdep deadlock warning due to dev_replace
Xfstests btrfs/011 complains about a deadlock warning,

[ 1226.649039] =========================================================
[ 1226.649039] [ INFO: possible irq lock inversion dependency detected ]
[ 1226.649039] 4.1.0+ #270 Not tainted
[ 1226.649039] ---------------------------------------------------------
[ 1226.652955] kswapd0/46 just changed the state of lock:
[ 1226.652955]  (&delayed_node->mutex){+.+.-.}, at: [<ffffffff81458735>] __btrfs_release_delayed_node+0x45/0x1d0
[ 1226.652955] but this lock took another, RECLAIM_FS-unsafe lock in the past:
[ 1226.652955]  (&fs_info->dev_replace.lock){+.+.+.}

and interrupts could create inverse lock ordering between them.

[ 1226.652955]
other info that might help us debug this:
[ 1226.652955] Chain exists of:
  &delayed_node->mutex --> &found->groups_sem --> &fs_info->dev_replace.lock

[ 1226.652955]  Possible interrupt unsafe locking scenario:

[ 1226.652955]        CPU0                    CPU1
[ 1226.652955]        ----                    ----
[ 1226.652955]   lock(&fs_info->dev_replace.lock);
[ 1226.652955]                                local_irq_disable();
[ 1226.652955]                                lock(&delayed_node->mutex);
[ 1226.652955]                                lock(&found->groups_sem);
[ 1226.652955]   <Interrupt>
[ 1226.652955]     lock(&delayed_node->mutex);
[ 1226.652955]
 *** DEADLOCK ***

Commit 084b6e7c76 ("btrfs: Fix a lockdep warning when running xfstest.") tried
to fix a similar one that has the exactly same warning, but with that, we still
run to this.

The above lock chain comes from
btrfs_commit_transaction
  ->btrfs_run_delayed_items
    ...
    ->__btrfs_update_delayed_inode
      ...
      ->__btrfs_cow_block
         ...
         ->find_free_extent
            ->cache_block_group
              ->load_free_space_cache
                ->btrfs_readpages
                  ->submit_one_bio
                    ...
                    ->__btrfs_map_block
                      ->btrfs_dev_replace_lock

However, with high memory pressure, tasks which hold dev_replace.lock can
be interrupted by kswapd and then kswapd is intended to release memory occupied
by superblock, inodes and dentries, where we may call evict_inode, and it comes
to

[ 1226.652955]  [<ffffffff81458735>] __btrfs_release_delayed_node+0x45/0x1d0
[ 1226.652955]  [<ffffffff81459e74>] btrfs_remove_delayed_node+0x24/0x30
[ 1226.652955]  [<ffffffff8140c5fe>] btrfs_evict_inode+0x34e/0x700

delayed_node->mutex may be acquired in __btrfs_release_delayed_node(), and it leads
to a ABBA deadlock.

To fix this, we can use "blocking rwlock" used in the case of extent_buffer, but
things are simpler here since we only needs read's spinlock to blocking lock.

With this, btrfs/011 no more produces warnings in dmesg.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2016-02-23 13:10:10 +01:00
David Sterba
58c4e17384 btrfs: scrub: use GFP_KERNEL on the submission path
Scrub is not on the critical writeback path we don't need to use
GFP_NOFS for all allocations. The failures are handled and stats passed
back to userspace.

Let's use GFP_KERNEL on the paths where everything is ok, ie. setup the
global structures and the IO submission paths.

Functions that do the repair and fixups still use GFP_NOFS as we might
want to skip any other filesystem activity if we encounter an error.
This could turn out to be unnecessary, but requires more review compared
to the easy cases in this patch.

Signed-off-by: David Sterba <dsterba@suse.com>
2016-02-11 15:19:39 +01:00
Al Viro
5955102c99 wrappers for ->i_mutex access
parallel to mutex_{lock,unlock,trylock,is_locked,lock_nested},
inode_foo(inode) being mutex_foo(&inode->i_mutex).

Please, use those for access to ->i_mutex; over the coming cycle
->i_mutex will become rwsem, with ->lookup() done with it held
only shared.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2016-01-22 18:04:28 -05:00
Zhao Lei
bfca9a6d4b btrfs: Fix calculation of rbio->dbitmap's size calculation
Current code is trying to calculate rbio->dbitmap's size to make it
align to sizeof(long), but implement haven't achived this object,
it is align to sizeof(char) instead.
This patch fixed above calculation, and use sizeof(long) instead of
fixed "8" to increate compatibility.

Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
2016-01-20 07:22:15 -08:00
Chris Mason
acc308556c Merge branch 'misc-cleanups-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus-4.5 2016-01-19 18:21:00 -08:00
Jeff Mahoney
95617d6932 btrfs: cleanup, stop casting for extent_map->lookup everywhere
Overloading extent_map->bdev to struct map_lookup * might have started out
as a means to an end, but it's a pattern that's used all over the place
now. Let's get rid of the casting and just add a union instead.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2016-01-15 19:22:28 +01:00
Chris Mason
b28cf57246 Merge branch 'misc-cleanups-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus-4.5
Signed-off-by: Chris Mason <clm@fb.com>
2016-01-11 06:08:37 -08:00
Chris Mason
a3058101c1 Merge branch 'misc-for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus-4.5 2016-01-11 05:59:32 -08:00
David Sterba
e4058b54d1 btrfs: cleanup, use enum values for btrfs_path reada
Replace the integers by enums for better readability. The value 2 does
not have any meaning since a717531942
"Btrfs: do less aggressive btree readahead" (2009-01-22).

Signed-off-by: David Sterba <dsterba@suse.com>
2016-01-07 15:01:15 +01:00
David Sterba
7928d672ff btrfs: cleanup, remove stray return statements
Signed-off-by: David Sterba <dsterba@suse.com>
2016-01-07 14:30:52 +01:00
David Sterba
0de270fa83 btrfs: drop duplicate prefix from scrub workqueues
The helper btrfs_alloc_workqueue will add the "btrfs-" prefix.

Signed-off-by: David Sterba <dsterba@suse.com>
2016-01-07 14:26:58 +01:00
Chris Mason
bb9d687618 Merge branch 'dev/simplify-set-bit' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus-4.5
Signed-off-by: Chris Mason <clm@fb.com>
2015-12-23 13:17:42 -08:00
David Sterba
ff13db41f1 btrfs: drop unused parameter from lock_extent_bits
We've always passed 0. Stack usage will slightly decrease.

Signed-off-by: David Sterba <dsterba@suse.com>
2015-12-03 14:30:40 +01:00
Filipe Manana
758f2dfcf8 Btrfs: fix scrub preventing unused block groups from being deleted
Currently scrub can race with the cleaner kthread when the later attempts
to delete an unused block group, and the result is preventing the cleaner
kthread from ever deleting later the block group - unless the block group
becomes used and unused again. The following diagram illustrates that
race:

              CPU 1                                 CPU 2

 cleaner kthread
   btrfs_delete_unused_bgs()

     gets block group X from
     fs_info->unused_bgs and
     removes it from that list

                                             scrub_enumerate_chunks()

                                               searches device tree using
                                               its commit root

                                               finds device extent for
                                               block group X

                                               gets block group X from the tree
                                               fs_info->block_group_cache_tree
                                               (via btrfs_lookup_block_group())

                                               sets bg X to RO

     sees the block group is
     already RO and therefore
     doesn't delete it nor adds
     it back to unused list

So fix this by making scrub add the block group again to the list of
unused block groups if the block group is still unused when it finished
scrubbing it and it hasn't been removed already.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-11-25 05:22:08 -08:00
Filipe Manana
020d5b7366 Btrfs: fix race between scrub and block group deletion
Scrub can race with the cleaner kthread deleting block groups that are
unused (and with relocation too) leading to a failure with error -EINVAL
that gets returned to user space.

The following diagram illustrates how it happens:

              CPU 1                                 CPU 2

 cleaner kthread
   btrfs_delete_unused_bgs()

     gets block group X from
     fs_info->unused_bgs

     sets block group to RO

       btrfs_remove_chunk(bg X)

         deletes device extents

                                         scrub_enumerate_chunks()

                                           searches device tree using
                                           its commit root

                                           finds device extent for
                                           block group X

                                           gets block group X from the tree
                                           fs_info->block_group_cache_tree
                                           (via btrfs_lookup_block_group())

                                           sets bg X to RO (again)

          btrfs_remove_block_group(bg X)

            deletes block group from
            fs_info->block_group_cache_tree

            removes extent map from
            fs_info->mapping_tree

                                               scrub_chunk(offset X)

                                                 searches fs_info->mapping_tree
                                                 for extent map starting at
                                                 offset X

                                                    --> doesn't find any such
                                                        extent map
                                                    --> returns -EINVAL and scrub
                                                        errors out to userspace
                                                        with -EINVAL

Fix this by dealing with an extent map lookup failure as an indicator of
block group deletion.
Issue reproduced with fstest btrfs/071.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-11-25 05:19:51 -08:00
Zhaolei
76a8efa171 btrfs: Continue replace when set_block_ro failed
xfstests/011 failed in node with small_size filesystem.
Can be reproduced by following script:
  DEV_LIST="/dev/vdd /dev/vde"
  DEV_REPLACE="/dev/vdf"

  do_test()
  {
      local mkfs_opt="$1"
      local size="$2"

      dmesg -c >/dev/null
      umount $SCRATCH_MNT &>/dev/null

      echo  mkfs.btrfs -f $mkfs_opt "${DEV_LIST[*]}"
      mkfs.btrfs -f $mkfs_opt "${DEV_LIST[@]}" || return 1
      mount "${DEV_LIST[0]}" $SCRATCH_MNT

      echo -n "Writing big files"
      dd if=/dev/urandom of=$SCRATCH_MNT/t0 bs=1M count=1 >/dev/null 2>&1
      for ((i = 1; i <= size; i++)); do
          echo -n .
          /bin/cp $SCRATCH_MNT/t0 $SCRATCH_MNT/t$i || return 1
      done
      echo

      echo Start replace
      btrfs replace start -Bf "${DEV_LIST[0]}" "$DEV_REPLACE" $SCRATCH_MNT || {
          dmesg
          return 1
      }
      return 0
  }

  # Set size to value near fs size
  # for example, 1897 can trigger this bug in 2.6G device.
  #
  ./do_test "-d raid1 -m raid1" 1897

System will report replace fail with following warning in dmesg:
 [  134.710853] BTRFS: dev_replace from /dev/vdd (devid 1) to /dev/vdf started
 [  135.542390] BTRFS: btrfs_scrub_dev(/dev/vdd, 1, /dev/vdf) failed -28
 [  135.543505] ------------[ cut here ]------------
 [  135.544127] WARNING: CPU: 0 PID: 4080 at fs/btrfs/dev-replace.c:428 btrfs_dev_replace_start+0x398/0x440()
 [  135.545276] Modules linked in:
 [  135.545681] CPU: 0 PID: 4080 Comm: btrfs Not tainted 4.3.0 #256
 [  135.546439] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014
 [  135.547798]  ffffffff81c5bfcf ffff88003cbb3d28 ffffffff817fe7b5 0000000000000000
 [  135.548774]  ffff88003cbb3d60 ffffffff810a88f1 ffff88002b030000 00000000ffffffe4
 [  135.549774]  ffff88003c080000 ffff88003c082588 ffff88003c28ab60 ffff88003cbb3d70
 [  135.550758] Call Trace:
 [  135.551086]  [<ffffffff817fe7b5>] dump_stack+0x44/0x55
 [  135.551737]  [<ffffffff810a88f1>] warn_slowpath_common+0x81/0xc0
 [  135.552487]  [<ffffffff810a89e5>] warn_slowpath_null+0x15/0x20
 [  135.553211]  [<ffffffff81448c88>] btrfs_dev_replace_start+0x398/0x440
 [  135.554051]  [<ffffffff81412c3e>] btrfs_ioctl+0x1d2e/0x25c0
 [  135.554722]  [<ffffffff8114c7ba>] ? __audit_syscall_entry+0xaa/0xf0
 [  135.555506]  [<ffffffff8111ab36>] ? current_kernel_time64+0x56/0xa0
 [  135.556304]  [<ffffffff81201e3d>] do_vfs_ioctl+0x30d/0x580
 [  135.557009]  [<ffffffff8114c7ba>] ? __audit_syscall_entry+0xaa/0xf0
 [  135.557855]  [<ffffffff810011d1>] ? do_audit_syscall_entry+0x61/0x70
 [  135.558669]  [<ffffffff8120d1c1>] ? __fget_light+0x61/0x90
 [  135.559374]  [<ffffffff81202124>] SyS_ioctl+0x74/0x80
 [  135.559987]  [<ffffffff81809857>] entry_SYSCALL_64_fastpath+0x12/0x6f
 [  135.560842] ---[ end trace 2a5c1fc3205abbdd ]---

Reason:
 When big data writen to fs, the whole free space will be allocated
 for data chunk.
 And operation as scrub need to set_block_ro(), and when there is
 only one metadata chunk in system(or other metadata chunks
 are all full), the function will try to allocate a new chunk,
 and failed because no space in device.

Fix:
 When set_block_ro failed for metadata chunk, it is not a problem
 because scrub_lock paused commit_trancaction in same time, and
 metadata are always cowed, so the on-the-fly writepages will not
 write data into same place with scrub/replace.
 Let replace continue in this case is no problem.

Tested by above script, and xfstests/011, plus 100 times xfstests/070.

Changelog v1->v2:
1: Add detail comments in source and commit-message.
2: Add dmesg detail into commit-message.
3: Limit return value of -ENOSPC to be passed.
All suggested by: Filipe Manana <fdmanana@gmail.com>

Suggested-by: Filipe Manana <fdmanana@gmail.com>
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-11-25 05:19:51 -08:00
Zhao Lei
3b5753ec23 btrfs: Remove len argument from scrub_find_csum
It is useless.

Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-11-10 19:27:13 -08:00
Zhao Lei
affe4a5ae1 btrfs: Reduce unnecessary arguments in scrub_recheck_block
We don't need pass so many arguments for recheck sblock now,
this patch cleans them.

Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-11-10 19:27:10 -08:00
Zhao Lei
ba7cf9882b btrfs: Use scrub_checksum_data and scrub_checksum_tree_block for scrub_recheck_block_checksum
We can use existing scrub_checksum_data() and scrub_checksum_tree_block()
for scrub_recheck_block_checksum(), instead of write duplicated code.

Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-11-10 19:27:06 -08:00
Zhao Lei
772d233f5d btrfs: Reset sblock->xxx_error stats before calling scrub_recheck_block_checksum
We should reset sblock->xxx_error stats before calling
scrub_recheck_block_checksum().

Current code run correctly because all sblock are allocated by
k[cz]alloc(), and the error stats are not got changed.

Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-11-10 19:27:03 -08:00
Zhao Lei
4734b7ed79 btrfs: scrub: setup all fields for sblock_to_check
scrub_setup_recheck_block() isn't setup all necessary fields for
sblock_to_check because history reason.

So current code need more arguments in severial functions,
and more local variables, just to passing these lacked values to
necessary place.

This patch setup above fields to sblock_to_check in
scrub_setup_recheck_block(), for:
1: more cleanup for function arg, local variable
2: to make sblock_to_check complete, then we can use sblock_to_check
   without concern about some uninitialized member.

Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-11-10 19:27:00 -08:00
Zhao Lei
9799d2c32b btrfs: scrub: set error stats when tree block spanning stripes
It is better to show error stats to user when we found tree block
spanning stripes.

On a btrfs created by old version of btrfs-convert:
Before patch:
  # btrfs scrub start -B /dev/vdh
  scrub done for 8b342d35-2904-41ab-b3cb-2f929709cf47
          scrub started at Tue Aug 25 21:19:09 2015 and finished after 00:00:00
          total bytes scrubbed: 53.54MiB with 0 errors
  # dmesg
  ...
  [  128.711434] BTRFS error (device vdh): scrub: tree block 27054080 spanning stripes, ignored. logical=27000832
  [  128.712744] BTRFS error (device vdh): scrub: tree block 27054080 spanning stripes, ignored. logical=27066368
  ...

After patch:
  # btrfs scrub start -B /dev/vdh
  scrub done for ff7f844b-7a4e-4b1a-88a9-8252ab25be1b
          scrub started at Tue Aug 25 21:42:29 2015 and finished after 00:00:00
          total bytes scrubbed: 53.60MiB with 2 errors
          error details:
          corrected errors: 0, uncorrectable errors: 2, unverified errors: 0
  ERROR: There are uncorrectable errors.
  # dmesg
  ...omit...
  #

Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-11-10 19:26:57 -08:00
David Sterba
9464732266 btrfs: switch message printers to ratelimited variants
Signed-off-by: David Sterba <dsterba@suse.com>
2015-10-08 13:04:06 +02:00
David Sterba
b14af3b46f btrfs: switch message printers to ratelimited _in_rcu variants
Signed-off-by: David Sterba <dsterba@suse.com>
2015-10-08 11:07:55 +02:00
David Sterba
ecaeb14b91 btrfs: switch message printers to _in_rcu variants
Signed-off-by: David Sterba <dsterba@suse.com>
2015-10-08 11:07:55 +02:00
Linus Torvalds
e91eb6204f Merge branch 'for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs cleanups and fixes from Chris Mason:
 "These are small cleanups, and also some fixes for our async worker
  thread initialization.

  I was having some trouble testing these, but it ended up being a
  combination of changing around my test servers and a shiny new
  schedule while atomic from the new start/finish_plug in
  writeback_sb_inodes().

  That one only hits on btrfs raid5/6 or MD raid10, and if I wasn't
  changing a bunch of things in my test setup at once it would have been
  really clear.  Fix for writeback_sb_inodes() on the way as well"

* 'for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: cleanup: remove unnecessary check before btrfs_free_path is called
  btrfs: async_thread: Fix workqueue 'max_active' value when initializing
  btrfs: Add raid56 support for updating  num_tolerated_disk_barrier_failures in btrfs_balance
  btrfs: Cleanup for btrfs_calc_num_tolerated_disk_barrier_failures
  btrfs: Remove noused chunk_tree and chunk_objectid from scrub_enumerate_chunks and scrub_chunk
  btrfs: Update out-of-date "skip parity stripe" comment
2015-09-11 12:38:25 -07:00
Linus Torvalds
22365979ab Merge branch 'for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs updates from Chris Mason:
 "This has Jeff Mahoney's long standing trim patch that fixes corners
  where trims were missing.  Omar has some raid5/6 fixes, especially for
  using scrub and device replace when devices are missing.

  Zhao Lie continues cleaning and fixing things, this series fixes some
  really hard to hit corners in xfstests.  I had to pull it last merge
  window due to some deadlocks, but those are now resolved.

  I added support for Tejun's new blkio controllers.  It seems to work
  well for single devices, we'll expand to multi-device as well"

* 'for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (47 commits)
  btrfs: fix compile when block cgroups are not enabled
  Btrfs: fix file read corruption after extent cloning and fsync
  Btrfs: check if previous transaction aborted to avoid fs corruption
  btrfs: use __GFP_NOFAIL in alloc_btrfs_bio
  btrfs: Prevent from early transaction abort
  btrfs: Remove unused arguments in tree-log.c
  btrfs: Remove useless condition in start_log_trans()
  Btrfs: add support for blkio controllers
  Btrfs: remove unused mutex from struct 'btrfs_fs_info'
  Btrfs: fix parity scrub of RAID 5/6 with missing device
  Btrfs: fix device replace of a missing RAID 5/6 device
  Btrfs: add RAID 5/6 BTRFS_RBIO_REBUILD_MISSING operation
  Btrfs: count devices correctly in readahead during RAID 5/6 replace
  Btrfs: remove misleading handling of missing device scrub
  btrfs: fix clone / extent-same deadlocks
  Btrfs: fix defrag to merge tail file extent
  Btrfs: fix warning in backref walking
  btrfs: Add WARN_ON() for double lock in btrfs_tree_lock()
  btrfs: Remove root argument in extent_data_ref_count()
  btrfs: Fix wrong comment of btrfs_alloc_tree_block()
  ...
2015-09-05 15:14:43 -07:00
Zhao Lei
8c204c9657 btrfs: Remove noused chunk_tree and chunk_objectid from scrub_enumerate_chunks and scrub_chunk
These variables are not used from introduced version, remove them.

Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-08-31 11:45:46 -07:00
Zhao Lei
7955323bdc btrfs: Update out-of-date "skip parity stripe" comment
Because btrfs support scrub raid56 parity stripe now.

Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-08-31 11:45:45 -07:00
Kent Overstreet
b54ffb73ca block: remove bio_get_nr_vecs()
We can always fill up the bio now, no need to estimate the possible
size based on queue parameters.

Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
[hch: rebased and wrote a changelog]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-08-13 12:32:04 -06:00
Omar Sandoval
4a770891d9 Btrfs: fix parity scrub of RAID 5/6 with missing device
When testing the previous patch, Zhao Lei reported a similar bug when
attempting to scrub a degraded RAID 5/6 filesystem with a missing
device, leading to NULL pointer dereferences from the RAID 5/6 parity
scrubbing code.

The first cause was the same as in the previous patch: attempting to
call bio_add_page() on a missing block device. To fix this,
scrub_extent_for_parity() can just mark the sectors on the missing
device as errors instead of attempting to read from it.

Additionally, the code uses scrub_remap_extent() to map the extent of
the corresponding data stripe, but the extent wasn't already mapped. If
scrub_remap_extent() finds a missing block device, it doesn't initialize
extent_dev, so we're left with a NULL struct btrfs_device. The solution
is to use btrfs_map_block() directly.

Reported-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-08-09 07:34:26 -07:00
Omar Sandoval
73ff61dbe5 Btrfs: fix device replace of a missing RAID 5/6 device
The original implementation of device replace on RAID 5/6 seems to have
missed support for replacing a missing device. When this is attempted,
we end up calling bio_add_page() on a bio with a NULL ->bi_bdev, which
crashes when we try to dereference it. This happens because
btrfs_map_block() has no choice but to return us the missing device
because RAID 5/6 don't have any alternate mirrors to read from, and a
missing device has a NULL bdev.

The idea implemented here is to handle the missing device case
separately, which better only happen when we're replacing a missing RAID
5/6 device. We use the new BTRFS_RBIO_REBUILD_MISSING operation to
reconstruct the data from parity, check it with
scrub_recheck_block_checksum(), and write it out with
scrub_write_block_to_dev_replace().

Reported-by: Philip <bugzilla@philip-seeger.de>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=96141
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-08-09 07:34:26 -07:00
Omar Sandoval
b4ee178268 Btrfs: add RAID 5/6 BTRFS_RBIO_REBUILD_MISSING operation
The current RAID 5/6 recovery code isn't quite prepared to handle
missing devices. In particular, it expects a bio that we previously
attempted to use in the read path, meaning that it has valid pages
allocated. However, missing devices have a NULL blkdev, and we can't
call bio_add_page() on a bio with a NULL blkdev. We could do manual
manipulation of bio->bi_io_vec, but that's pretty gross. So instead, add
a separate path that allows us to manually add pages to the rbio.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-08-09 07:34:26 -07:00
Omar Sandoval
03679ade86 Btrfs: remove misleading handling of missing device scrub
scrub_submit() claims that it can handle a bio with a NULL block device,
but this is misleading, as calling bio_add_page() on a bio with a NULL
->bi_bdev would've already crashed. Delete this, as we're about to
properly handle a missing block device.

Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-08-09 07:34:26 -07:00
Zhaolei
55e3a601c8 btrfs: Fix data checksum error cause by replace with io-load.
xfstests btrfs/070 sometimes failed.
In my test machine, its fail rate is about 30%.
In another vm(vmware), its fail rate is about 50%.

Reason:
  btrfs/070 do replace and defrag with fsstress simultaneously,
  after above operation, checksum error is found by scrub.

  Actually, it have no relationship with defrag operation, only
  replace with fsstress can trigger this bug.

  New data writen to target device have possibility rewrited by
  old data from source device by replace code in debug, to avoid
  above problem, we can set target block group to readonly in
  replace period, so new data requested by other operation will
  not write to same place with replace code.

  Before patch(4.1-rc3):
    30% failed in 100 xfstests.
  After patch:
    0% failed in 300 xfstests.

It also happened in btrfs/071 as it's another scrub with IO load tests.

Reported-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-08-09 07:07:13 -07:00