Callers of rxe_mem_copy() provide pointer to store updated CRC
value. That pointer was supposed to be updated, but the
commit cee2688e3c ("IB/rxe: Offload CRC calculation when possible")
mistakenly removed that assignment for RXE_MEM_TYPE_DMA memory type.
The code worked because there are no actual callers with
RXE_MEM_TYPE_DMA, who are interested in returned value of crcp.
The one caller in read_reply(), who uses the returned crcp didn't
set RXE_MEM_TYPE_DMA as mem->type.
Fixes: cee2688e3c ("IB/rxe: Offload CRC calculation when possible")
Reported-by: Andrew Boyer <andrew.boyer@dell.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Andrew Boyer <andrew.boyer@dell.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The error path for context initialization is not consistent. Cleanup all
resources on failure.
Removed unused variable user_event_mask.
Add the _BASE_FAILED bit to the event flags so that a base context can
notify waiting sub contexts that they cannot continue.
Running out of sub contexts is an EBUSY result, not EINVAL.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The current algorithm for generating sub-context IDs is FILO. If the
contexts are not closed in that order, the uniqueness of the ID will be
compromised. I.e. logging the creation/deletion of context IDs with an
application that assigns and closes in a FIFO order reveals:
cache_id: assign: uctxt: 3 sub_ctxt: 0
cache_id: assign: uctxt: 3 sub_ctxt: 1
cache_id: assign: uctxt: 3 sub_ctxt: 2
cache_id: close: uctxt: 3 sub_ctxt: 0
cache_id: assign: uctxt: 3 sub_ctxt: 2 <<<
The sub_ctxt ID 2 is reused incorrectly.
Update the sub-context ID assign algorithm to use a bitmask of in_use
contexts. The new algorithm will allow the contexts to be closed in any
order, and will only re-use unused contexts.
Size subctxt and subctxt_cnt to match the user API size.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Context initialization mixes base context init with sub context init.
This is bad because contexts can be reused, and on reuse, reinit things
that should not re-initialized.
Normalize comments and function names to refer to base context and
sub context (not main, shared or slaves).
Separate the base context initialization from sub context initialization.
hfi1_init_ctxt() cannot return an error so changed to a void and remove
error message.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In the close path the context is removed from the device array, and then
the clear pkey function is called. The pkey function trys to get the
context from the device array, but because it was removed the clearing
does not occur.
Rework pkey clear function to work as expected. Update the function
variable to reflect the correct size and name of the hw_context.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The search for available shared contexts walks each registered hfi1
device. This search is too broad because other devices may not
be on the same fabric, and using its contexts could cause unexpected
behavior.
Removed walking the list of devices, limiting the search to the opened
device. With the device walk removed, the hfi1_devdata (dd) is not
available. Added it to the hfi1_filedata for reference.
With this change, hfi1_count_units() was rendered obsolete and was
removed.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The AHG index is only accessed in the request call
from user space, so there's no need for atomic semantics.
Replace atomic operations for SDMA_REQ_HAVE_AHG bit
with a test of the AHG index.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Since almost all functions that use the hfi1_filedata get the pointer
from the file pointer, simplify by only passing the hfi1_filedata pointer.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
To improve the readability of function prototypes, give the parameters
names.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The only context that frees user_exp_rcv data structures is the last
context closed (from a sub-context set). This leaks the allocations
from the other sub-contexts. Separate the common frees from the
specific frees and call them at the appropriate time.
Using KEDR to check for memory leaks we get:
Before test:
[leak_check] Possible leaks: 25
After test:
[leak_check] Possible leaks: 31 (6 leaked data structures)
After patch applied (before and after test have the same value)
[leak_check] Possible leaks: 25
Each leak is 192 + 13440 + 6720 = 20352 bytes per sub-context.
Cc: stable@vger.kernel.org
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
If the eager buffer allocation fails, it is necessary to return
an error code.
Cc: stable@vger.kernel.org
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Performance analysis shows benefits for PSM2 in increasing eager buffer
size from 2MB to 8MB. The change has neutral impact on verbs.
Make change to the module parameter's default value. Allocation
ring down was verified to work with the larger buffer size.
Reviewed-by: Tadeusz Struk <tadeusz.struk@intel.com>
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Tymoteusz Kielan <tymoteusz.kielan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Div instructions show costly in profiles when
the tx request header is set. Using right shift
instead of a divide operation reduces the cycles
spent in the function that sets the tx request
header as shown in the profile. Use right shift
operation instead.
Profile before change:
43.24% 009
|
|--23.41%-- user_sdma_send_pkts
| |
| |--99.90%-- hfi1_user_sdma_process_requestAfter:
Profile after change:
45.75% 009
|
|--14.81%-- user_sdma_send_pkts
| |
| |--99.95%-- hfi1_user_sdma_process_request
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When there are many RC QPs and an RDMA READ request
is sent, timeouts occur on the requester side because
of fairness among RC QPs on their relative SDMA engine
on the responder side. This also hits write and send, but
to a lesser extent.
Complicating the issue is that the current code checks if workqueue
is congested before scheduling other QPs, however, this
check is based on the number of active entries in the
workqueue, which was found to be too big to for
workqueue_congested() to be effective.
Fix by reducing the number of active entries as revealed by
experimentation from the default of num_sdma to
HFI1_MAX_ACTIVE_WORKQUEUE_ENTRIES. Retry counts were monitored
to determine the correct value.
Tracing to investigate any future issues is also added.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This field is causing excessive cache line bouncing.
There are spare bytes in the r_lock cache line so the best approach
is to make an rvt QP field and remove from the hfi1 priv field.
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In goto_offline() function pstate is masked by 0xff when compared
to PLS_OFFLINE state. Mask should be 0xf0, since upper 4 bits
specify the "major" state.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Jakub Byczkowski <jakub.byczkowski@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In order to let the bonding driver report the correct speed
of the underlaying interfaces, when they are IPoIB, the ethtool
function get_link_ksettings() in the IPoIB driver is implemented.
Cc: Joe Jin <joe.jin@oracle.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Suggested-by: Håkon Bugge <Haakon.Bugge@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
With commit eea40b8f62 ("infiniband: call ipv6 route lookup
via the stub interface"), if the route lookup fails due to
ipv6 being disabled, the dst variable is left untouched, and
the following dst_release() may access uninitialized memory.
Since ipv6_dst_lookup() always sets dst to NULL in case of
lookup failure with ipv6 enabled, fix the above just
returning the error code if the lookup fails.
Fixes: eea40b8f62 ("infiniband: call ipv6 route lookup via the stub interface")
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add port_xmit_wait to the error counters read by mlx5_ib_process_mad to
ensure sysfs port counter provides correct value for PortXmitWait.
Otherwise the sysfs port_xmit_wait file always contains zero.
The previous MAD_IFC implementation populated this counter, but it was
removed during the migration to PPCNT for error counters (32-bit only).
Signed-off-by: Tim Wright <tim@binbash.co.uk>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In write to debugfs file 'resource_stats' the local buffer 'tmp_str' is
written at index 'count-1' where 'count' is the size of the write, so
potentially 0.
This patch filters odd values for the write size/position to avoid this
type of problem.
Signed-off-by: Michael Mera <dev@michaelmera.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The last two actual parameters when calling id_map_find_by_sl_id()
from id_map_get() are swapped. However, the same formal parameters to
id_map_get() have them swapped as well, inverting the effect of the
first error.
This commit improves readability, but makes no functional change to
the code.
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Reviewed-by: Wengang Wang <wen.gang.wang@oracle.com>
Reviewed-by: Knut Omang <knut.omang@oracle.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Change and simplify the code to match the variable name. This commit
improves readability but makes no functional change to the code.
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Suggested-by: Wengang Wang <wen.gang.wang@oracle.com>
Reviewed-by: Wengang Wang <wen.gang.wang@oracle.com>
Reviewed-by: Knut Omang <knut.omang@oracle.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In case we got an initial sg_offset, we need to
account for it in the mr length.
Cc: stable@vger.kernel.org
Fixes: ff2ba99365 ("IB/core: Add passing an offset into the SG to
ib_map_mr_sg")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Israel Rukshin <israelr@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When reading a RDMA WRITE FIRST packet we copy the DMA length from the RDMA
header into the qp->resp.resid variable for later use. Later in check_rkey()
we clamp it to the MTU if the packet is an RDMA WRITE packet and has a
residual length bigger than the MTU. Later in write_data_in() we subtract the
payload of the packet from the residual length. If the packet happens to have a
payload of exactly the MTU size we end up with a residual length of 0 despite
the packet not being the last in the conversation. When the next packet in the
conversation arrives, we don't have any residual length left and thus set the QP
into an error state.
This broke NVMe over Fabrics functionality over rdma_rxe.ko
The patch was verified using the following test.
# echo eth0 > /sys/module/rdma_rxe/parameters/add
# nvme connect -t rdma -a 192.168.155.101 -s 1023 -n nvmf-test
# mkfs.xfs -fK /dev/nvme0n1
meta-data=/dev/nvme0n1 isize=256 agcount=4, agsize=65536 blks
= sectsz=4096 attr=2, projid32bit=1
= crc=0 finobt=0, sparse=0
data = bsize=4096 blocks=262144, imaxpct=25
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0 ftype=1
log =internal log bsize=4096 blocks=2560, version=2
= sectsz=4096 sunit=1 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
# mount /dev/nvme0n1 /tmp/
[ 148.923263] XFS (nvme0n1): Mounting V4 Filesystem
[ 148.961196] XFS (nvme0n1): Ending clean mount
# dd if=/dev/urandom of=test.bin bs=1M count=128
128+0 records in
128+0 records out
134217728 bytes (134 MB, 128 MiB) copied, 0.437991 s, 306 MB/s
# sha256sum test.bin
cde42941f045efa8c4f0f157ab6f29741753cdd8d1cff93a6b03649d83c4129a test.bin
# cp test.bin /tmp/
sha256sum /tmp/test.bin
cde42941f045efa8c4f0f157ab6f29741753cdd8d1cff93a6b03649d83c4129a /tmp/test.bin
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Max Gurtovoy <maxg@mellanox.com>
Acked-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When the bit 26 of capmask2 field in OPA classport info
query is set, SA will query for OPA path records instead
of querying for IB path records. Note that OPA
path records can only be queried by kernel ULPs.
Userspace clients continue to query IB path records.
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add opa_sa_path_rec to sa_path_rec data structure.
The 'type' field in sa_path_rec identifies the
type of the path record.
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
sa_path_rec now contains a union of sa_path_rec_ib and sa_path_rec_roce
based on the type of the path record. Note that fields applicable to
path record type ROCE v1 and ROCE v2 fall under sa_path_rec_roce.
Accessor functions are added to these fields so the caller doesn't have
to know the type.
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
struct sa_path_rec has a gid_type field. This patch introduces a more
generic path record specific type 'rec_type' which is either IB, ROCE v1
or ROCE v2. The patch also provides conversion functions to get
a gid type from a path record type and vice versa
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Rename ib_sa_path_rec to a more generic sa_path_rec.
This is part of extending ib_sa to also support OPA
path records in addition to the IB defined path records.
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds braces around parameters to sizeof
as called out by checkpatch
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
rdma_ah_attr can now be either ib or roce allowing
core components to use one type or the other and also
to define attributes unique to a specific type. struct
ib_ah is also initialized with the type when its first
created. This ensures that calls such as modify_ah
dont modify the type of the address handle attribute.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Modify core and driver components to use accessor functions
introduced to access individual fields of rdma_ah_attr
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Functions pvrdma_ah_attr_to_ib and ib_ah_attr_to_pvrdma have
been renamed so they are in sync wit the rename of the
ib_ah_attr structure
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
local function to_ib_ah_attr is renamed so it in
sync with the rename of the ib_ah_attr structure
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
local function to_ib_ah_attr is renamed so it in
sync with the rename of the ib_ah_attr structure
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
local function to_ib_ah_attr is renamed so it in
sync with the rename of the ib_ah_attr structure
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Rename ib_destroy_ah to rdma_destroy_ah so its in sync with the
rename of the ib address handle attribute
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Rename ib_query_ah to rdma_query_ah so its in sync with the
rename of the ib address handle attribute
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Rename ib_modify_ah to rdma_modify_ah so its in sync with the
rename of the ib address handle attribute
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Rename ib_create_ah to rdma_create_ah so its in sync with the
rename of the ib address handle attribute
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch simply renames struct ib_ah_attr to
rdma_ah_attr as these fields specify attributes that are
not necessarily specific to IB.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Zero out ib_ah_attr before calling query_ah. Set ah_flags
appropriately.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Read/write grh fields of the ah_attr only if the
ah_flags field has the IB_AH_GRH bit enabled
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch adds braces around parameters to sizeof
as called out by checkpatch
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch fixes a checkpatch issue related to not having
to use an 'else' if the 'if' path returns from the function.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Address a checkpatch issue on missing identifier names
on function definitions.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
For OPA devices, SA will query the OPA classport info
instead of the IB defined classport info.
opa classport info exposes additional information and
capabilities that are specific to OPA devices.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Both opa_vnic and the hfi driver use the same opa_classport_info
definition. We will also have ib_sa capable of querying opa class
port info and would need this definition. Move it to ib_mad.h
for everyone to use.
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
SA will query and cache class port info as part of
its initialization. SA will also invalidate and
refresh the cache based on specific events. Callers such
as IPoIB and CM can query the SA to get the classportinfo
information. Apart from making the caller code much simpler,
this change puts the onus on the SA to query and maintain
classportinfo much like how it maitains the address handle to the SM.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Moving these will facilitate changes to these in the
next patchs. This is strictly a move and there are no
changes to the functions in any way.
Reviewed-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
