Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Nobody seems to call ata_sff_busy_sleep(), so we can get rid of it...
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Variable num_processed is just being incremented and it's never used
anywhere else. The variable and the increment are redundant so
remove it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
This device was used only on the davinci dm644x platform that
is now gone, and no references to the device remain in the
kernel.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
ata_read_log_page() first tries to read the log using READ LOG DMA EXT.
If that fails it will instead try to read the log using READ LOG EXT.
ata_exec_internal_sg() is synchronous, so it will wait for the command to
finish. If we actually got an error back from the device, it is correct
to retry. However, if the command timed out, ata_exec_internal_sg() will
freeze the port.
There is no point in retrying if the port is frozen, as
ata_exec_internal_sg() will return AC_ERR_SYSTEM on a frozen port,
without ever sending the command down to the drive.
Therefore, avoid retrying if the first command froze the port, as that
will result in a misleading AC_ERR_SYSTEM error print, instead of printing
the error that actually caused the port to be frozen (AC_ERR_TIMEOUT).
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Clean up the code by making use of the newly introduced
ata_port_is_frozen() helper function.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
The pata_ftide010 can be built without CONFIG_OF being enabled, as long
as the macro of_match_ptr() is not used when initializing the platform
driver .of_match_table field.
Remove the use of this macro and the build dependency on OF.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
If CONFIG_OF is disabled, then using the macro of_match_ptr() results
in the gemini_sata_of_match variable being unused, which generates a
compilation warning and a compilation error if CONFIG_WERROR is enabled.
Removing the use of this macro by directly assigning the
gemini_sata_of_match match table to the .of_match_table field in the
platform driver definition allows removing the dependency on OF for
compile tests, thus improving compile test coverage.
Fixes: f7220eac75 ("ata: Kconfig: fix sata gemini compile test condition")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
NO_IRQ is used to check the return of irq_of_parse_and_map().
On some architecture NO_IRQ is 0, on other architectures it is -1.
irq_of_parse_and_map() returns 0 on error, independent of NO_IRQ.
So use 0 instead of using NO_IRQ.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Currently, for PIO commands, ahci_qc_fill_rtf() reads the status and
error fields from the PIO Setup FIS area of the Received FIS Structure.
For any non-PIO command, ahci_qc_fill_rtf() currently reads the status
and error fields from the D2H Register FIS area of the Received FIS
Structure. This is simply not correct.
According to the SATA 3.5a specification:
11.10 DMA DATA-IN command protocol and 11.11 DMA DATA-OUT command
protocol: READ DMA and WRITE DMA (non-NCQ commands) will end with
the Send_status state, which transmits a Register D2H FIS.
Likewise, in:
11.15 FPDMA QUEUED command protocol: READ FPDMA QUEUED and WRITE FPDMA
QUEUED (NCQ commands) will end with the SendStatus state, which
transmits a Set Device Bits FIS.
So, for NCQ commands, there is never a D2H Register FIS sent.
Reading the status and error fields from the D2H Register FIS area
for a NCQ command, will result in us returning the status and error
values for the last non-NCQ command, which is incorrect.
Update ahci_qc_fill_rtf() to read the status and error fields from
the correct area in the Received FIS Structure for NCQ commands.
Once reason why this has not been detected before, could be because,
in case of an NCQ error, ata_eh_analyze_ncq_error() will overwrite
the (incorrect) status and error values set by ahci_qc_fill_rtf().
However, even successful NCQ commands can have bits set in the status
field (e.g. the sense data available bit), so it is mandatory to read
the status from the correct area also for NCQ commands.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Currently, the sense data reporting feature set is enabled for all ATA
devices which supports the feature set (ata_id_has_sense_reporting()),
see ata_dev_config_sense_reporting().
However, even if sense data reporting is enabled, and the device
indicates that sense data is available, the sense data is only fetched
for ATA ZAC devices. For regular ATA devices, the available sense data
is never fetched, it is simply ignored. Instead, libata will use the
ERROR + STATUS fields and map them to a very generic and reduced set
of sense data, see ata_gen_ata_sense() and ata_to_sense_error().
When sense data reporting was first implemented, regular ATA devices
did fetch the sense data from the device. However, this was restricted
to only ATA ZAC devices in commit ca156e006a ("libata: don't request
sense data on !ZAC ATA devices").
With recent changes related to sense data and NCQ autosense, we want
to, once again, fetch the sense data for all ATA devices supporting
sense reporting.
ata_gen_ata_sense() should only be used for devices that don't support
the sense data reporting feature set.
hopefully the features will be more robust this time around.
It is not just ZAC, many new ATA features, e.g. Command Duration
Limits, relies on working NCQ autosense and sense data. Therefore,
it is not really an option to avoid fetching the sense data forever.
If we encounter a device that is misbehaving because the sense data is
actually fetched, then that device should be quirked such that it
never enables the sense data reporting feature set in the first place,
since such a device is obviously not compliant with the specification.
The order in which we will try to add sense data to a scsi_cmnd:
1) NCQ autosense (if supported) - ata_eh_analyze_ncq_error()
2) REQUEST SENSE DATA EXT (if supported) - ata_eh_request_sense()
3) error + status field translation - ata_gen_ata_sense(), called
by ata_scsi_qc_complete() if neither 1) or 2) is supported.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
While this shouldn't be needed if all devices that claim that they
support NCQ autosense (ata_id_has_ncq_autosense()) and/or the sense
data reporting feature (ata_id_has_sense_reporting()), actually
supported those features.
However, there might be some old ATA devices that either have these
bits set, even when they don't support those features, or they simply
return malformed data when using those features.
These devices should be quirked, but in order to try to minimize the
impact for the users of these such devices, it was suggested by Damien
Le Moal that it might be a good idea to sanity check the sense data
received from the device. If the sense data looks bogus, then the
sense data is never added to the scsi_cmnd command.
Introduce a new function, ata_scsi_sense_is_valid(), and use it in all
places where sense data is received from the device.
Suggested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
ata_eh_request_sense() returns early when flag ATA_QCFLAG_SENSE_VALID is
set. However, since the call to ata_eh_request_sense() is guarded by a
ATA_SENSE bit conditional, the logical conclusion for the reader is that
all checks are performed at the call site.
Highlight the fact that the sense data will not be fetched if flag
ATA_QCFLAG_SENSE_VALID is already set by adding an additional check to
the existing guarding conditional. No functional change.
Additionally, add a comment explaining that ata_eh_analyze_tf() will
only fetch the sense data if:
-It was a non-NCQ command that failed, or
-It was a NCQ command that failed, but the sense data was not included
in the NCQ command error log (i.e. NCQ autosense is not supported).
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Currently, the logic if we should call ata_scsi_set_sense()
(and set flag ATA_QCFLAG_SENSE_VALID to indicate that we have
successfully added sense data to the struct ata_queued_cmd)
looks like this:
if (dev->class == ATA_DEV_ZAC &&
((qc->result_tf.status & ATA_SENSE) || qc->result_tf.auxiliary))
The problem with this is that a drive can support the NCQ command
error log without supporting NCQ autosense.
On such a drive, if the failing command has sense data, the status
field in the NCQ command error log will have the ATA_SENSE bit set.
It is just that this sense data is not included in the NCQ command
error log when NCQ autosense is not supported. Instead the sense
data has to be fetched using the REQUEST SENSE DATA EXT command.
Therefore, we should only add the sense data if the drive supports
NCQ autosense AND the ATA_SENSE bit is set in the status field.
Fix this, and at the same time, remove the duplicated ATA_DEV_ZAC
check. The struct ata_taskfile supplied to ata_eh_read_log_10h()
is memset:ed before calling the function, so simply checking if
qc->result_tf.auxiliary is set is sufficient to tell us that the
log actually contained sense data.
Fixes: d238ffd59d ("libata: do not attempt to retrieve sense code twice")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
* Print the timeout value for internal command failures due to a
timeout (from Tomas).
* Improve parameter names in ata_dev_set_feature() to clarify this
function use (from Niklas).
* Improve the ahci driver low power mode setting initialization to allow
more flexibility for the user (from Rafael).
* Several patches to remove redundant variables in libata-core,
libata-eh and the pata_macio driver and to fix typos in comments (from
Jinpeng, Shaomin, Ye).
* Some code simplifications and macro renaming (for clarity) in various
functions of libata-core (from me).
* Add a missing check for a potential failure of sata_scr_read() in
sata_print_link_status() (from Li).
* Cleanup of libata Kconfig PATA_PLATFORM and PATA_OF_PLATFORM options
(from Lukas).
* Cleanups of ata dt-bindings and improvements of libahci_platform, ahci
and libahci code (from Serge)
* New driver for Synopsys AHCI SATA controllers, based of the generic
ahci code (from Serge). One compilation warning fix is added for this
driver (from me).
* Several fixes to macros used to discover a drive capabilities to be
consistent with the ACS specifications (from Niklas).
* A couple of simplifcations to some libata functions, removing
unnecessary arguments (from Niklas).
* An improvements to libata-eh code to avoid unnecessary link reset when
revalidating a drive after a failed command. In practice, this extra,
unneeded reset, reset does not cause any arm beyond slightly slowing
down error recovery (from Niklas).
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCYz0asgAKCRDdoc3SxdoY
drHoAQCJhb6MuQHzbN/wR5cTGAfWXQJWBJx2mJr7oKJCrB34PwD/RzphcsuaXDta
kwbTGlpitegByZTDKt9eMRLWmKgyngw=
=CnJj
-----END PGP SIGNATURE-----
Merge tag 'ata-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata updates from Damien Le Moal:
- Print the timeout value for internal command failures due to a
timeout (from Tomas)
- Improve parameter names in ata_dev_set_feature() to clarify this
function use (from Niklas)
- Improve the ahci driver low power mode setting initialization to
allow more flexibility for the user (from Rafael)
- Several patches to remove redundant variables in libata-core,
libata-eh and the pata_macio driver and to fix typos in comments
(from Jinpeng, Shaomin, Ye)
- Some code simplifications and macro renaming (for clarity) in various
functions of libata-core (from me)
- Add a missing check for a potential failure of sata_scr_read() in
sata_print_link_status() (from Li)
- Cleanup of libata Kconfig PATA_PLATFORM and PATA_OF_PLATFORM options
(from Lukas)
- Cleanups of ata dt-bindings and improvements of libahci_platform,
ahci and libahci code (from Serge)
- New driver for Synopsys AHCI SATA controllers, based of the generic
ahci code (from Serge). One compilation warning fix is added for this
driver (from me)
- Several fixes to macros used to discover a drive capabilities to be
consistent with the ACS specifications (from Niklas)
- A couple of simplifcations to some libata functions, removing
unnecessary arguments (from Niklas)
- An improvements to libata-eh code to avoid unnecessary link reset
when revalidating a drive after a failed command. In practice, this
extra, unneeded reset, reset does not cause any arm beyond slightly
slowing down error recovery (from Niklas)
* tag 'ata-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (45 commits)
ata: libata-eh: avoid needless hard reset when revalidating link
ata: libata: drop superfluous ata_eh_analyze_tf() parameter
ata: libata: drop superfluous ata_eh_request_sense() parameter
ata: fix ata_id_has_dipm()
ata: fix ata_id_has_ncq_autosense()
ata: fix ata_id_has_devslp()
ata: fix ata_id_sense_reporting_enabled() and ata_id_has_sense_reporting()
ata: libata-eh: Remove the unneeded result variable
ata: ahci_st: Enable compile test
ata: ahci_st: Fix compilation warning
MAINTAINERS: Add maintainers for DWC AHCI SATA driver
ata: ahci-dwc: Add Baikal-T1 AHCI SATA interface support
ata: ahci-dwc: Add platform-specific quirks support
dt-bindings: ata: ahci: Add Baikal-T1 AHCI SATA controller DT schema
ata: ahci: Add DWC AHCI SATA controller support
ata: libahci_platform: Add function returning a clock-handle by id
dt-bindings: ata: ahci: Add DWC AHCI SATA controller DT schema
ata: ahci: Introduce firmware-specific caps initialization
ata: ahci: Convert __ahci_port_base to accepting hpriv as arguments
ata: libahci: Don't read AHCI version twice in the save-config method
...
- Rework the device tree initialization, convert the drivers to the
new API and remove the old OF code (Daniel Lezcano).
- Fix return value to -ENODEV when searching for a specific thermal
zone which does not exist (Daniel Lezcano).
- Fix the return value inspection in of_thermal_zone_find() (Dan
Carpenter).
- Fix kernel panic when KASAN is enabled as it detects use after
free when unregistering a thermal zone (Daniel Lezcano).
- Move the set_trip ops inside the therma sysfs code (Daniel Lezcano).
- Remove unnecessary error message as it is already shown in the
underlying function (Jiapeng Chong).
- Rework the monitoring path and move the locks upper in the call
stack to fix some potentials race windows (Daniel Lezcano).
- Fix lockdep_assert() warning introduced by the lock rework (Daniel
Lezcano).
- Do not lock thermal zone mutex in the user space governor (Rafael
Wysocki).
- Revert the Mellanox 'hotter thermal zone' feature because it is
already handled in the thermal framework core code (Daniel Lezcano).
- Increase maximum number of trip points in the thermal core (Sumeet
Pawnikar).
- Replace strlcpy() with unused retval with strscpy() in the core
thermal control code (Wolfram Sang).
- Use module_pci_driver() macro in the int340x processor_thermal
driver (Shang XiaoJing).
- Use get_cpu() instead of smp_processor_id() in the intel_powerclamp
thermal driver to prevent it from crashing and remove unused
accounting for IRQ wakes from it (Srinivas Pandruvada).
- Consolidate priv->data_vault checks in int340x_thermal (Rafael
Wysocki).
- Check the policy first in cpufreq_cooling_register() (Xuewen Yan).
- Drop redundant error message from da9062-thermal (zhaoxiao).
- Drop of_match_ptr() from thermal_mmio (Jean Delvare).
-----BEGIN PGP SIGNATURE-----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=Ufw7
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"The most significant part of this update is the thermal control DT
initialization rework from Daniel Lezcano and the following conversion
of drivers to use the new API introduced by it
Apart from that, the maximum number of trip points in a thermal zone
is increased and there are some fixes and code cleanups
Specifics:
- Rework the device tree initialization, convert the drivers to the
new API and remove the old OF code (Daniel Lezcano)
- Fix return value to -ENODEV when searching for a specific thermal
zone which does not exist (Daniel Lezcano)
- Fix the return value inspection in of_thermal_zone_find() (Dan
Carpenter)
- Fix kernel panic when KASAN is enabled as it detects use after free
when unregistering a thermal zone (Daniel Lezcano)
- Move the set_trip ops inside the therma sysfs code (Daniel Lezcano)
- Remove unnecessary error message as it is already shown in the
underlying function (Jiapeng Chong)
- Rework the monitoring path and move the locks upper in the call
stack to fix some potentials race windows (Daniel Lezcano)
- Fix lockdep_assert() warning introduced by the lock rework (Daniel
Lezcano)
- Do not lock thermal zone mutex in the user space governor (Rafael
Wysocki)
- Revert the Mellanox 'hotter thermal zone' feature because it is
already handled in the thermal framework core code (Daniel Lezcano)
- Increase maximum number of trip points in the thermal core (Sumeet
Pawnikar)
- Replace strlcpy() with unused retval with strscpy() in the core
thermal control code (Wolfram Sang)
- Use module_pci_driver() macro in the int340x processor_thermal
driver (Shang XiaoJing)
- Use get_cpu() instead of smp_processor_id() in the intel_powerclamp
thermal driver to prevent it from crashing and remove unused
accounting for IRQ wakes from it (Srinivas Pandruvada)
- Consolidate priv->data_vault checks in int340x_thermal (Rafael
Wysocki)
- Check the policy first in cpufreq_cooling_register() (Xuewen Yan)
- Drop redundant error message from da9062-thermal (zhaoxiao)
- Drop of_match_ptr() from thermal_mmio (Jean Delvare)"
* tag 'thermal-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (55 commits)
thermal: core: Increase maximum number of trip points
thermal: int340x: processor_thermal: Use module_pci_driver() macro
thermal: intel_powerclamp: Remove accounting for IRQ wakes
thermal: intel_powerclamp: Use get_cpu() instead of smp_processor_id() to avoid crash
thermal: int340x_thermal: Consolidate priv->data_vault checks
thermal: cpufreq_cooling: Check the policy first in cpufreq_cooling_register()
thermal: Drop duplicate words from comments
thermal: move from strlcpy() with unused retval to strscpy()
thermal: da9062-thermal: Drop redundant error message
thermal/drivers/thermal_mmio: Drop of_match_ptr()
thermal: gov_user_space: Do not lock thermal zone mutex
Revert "mlxsw: core: Add the hottest thermal zone detection"
thermal/core: Fix lockdep_assert() warning
thermal/core: Move the mutex inside the thermal_zone_device_update() function
thermal/core: Move the thermal zone lock out of the governors
thermal/governors: Group the thermal zone lock inside the throttle function
thermal/core: Rework the monitoring a bit
thermal/core: Rearm the monitoring only one time
thermal/drivers/qcom/spmi-adc-tm5: Remove unnecessary print function dev_err()
thermal/of: Remove old OF code
...
The function __ata_change_queue_depth() uses the helper
ata_scsi_find_dev() to get the ata_device structure of a scsi device and
set that device maximum queue depth. However, when the ata device is
managed by libsas, ata_scsi_find_dev() returns NULL, turning
__ata_change_queue_depth() into a nop, which prevents the user from
setting the maximum queue depth of ATA devices used with libsas based
HBAs.
Fix this by renaming __ata_change_queue_depth() to
ata_change_queue_depth() and adding a pointer to the ata_device
structure of the target device as argument. This pointer is provided by
ata_scsi_change_queue_depth() using ata_scsi_find_dev() in the case of
a libata managed device and by sas_change_queue_depth() using
sas_to_ata_dev() in the case of a libsas managed ata device.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: John Garry <john.garry@huawei.com>
For SATA devices supporting NCQ, drivers using libsas first initialize a
scsi device queue depth based on the controller and device capabilities,
leading to the scsi device queue_depth field being 32 (ATA maximum queue
depth) for most setup. However, if libata was loaded using the
force=[ID]]noncq argument, the default queue depth should be set to 1 to
reflect the fact that queuable commands will never be used. This is
consistent with manually setting a device queue depth to 1 through sysfs
as that disables NCQ use for the device.
Fix ata_scsi_dev_config() to honor the noncq parameter by sertting the
device queue depth to 1 for devices that do not have the ATA_DFLAG_NCQ
flag set.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: John Garry <john.garry@huawei.com>
Commit 1527f69204 ("ata: ahci: Add Green Sardine vendor ID as
board_ahci_mobile") added an explicit entry for AMD Green Sardine
AHCI controller using the board_ahci_mobile configuration (this
configuration has later been renamed to board_ahci_low_power).
The board_ahci_low_power configuration enables support for low power
modes.
This explicit entry takes precedence over the generic AHCI controller
entry, which does not enable support for low power modes.
Therefore, when commit 1527f69204 ("ata: ahci: Add Green Sardine
vendor ID as board_ahci_mobile") was backported to stable kernels,
it make some Pioneer optical drives, which was working perfectly fine
before the commit was backported, stop working.
The real problem is that the Pioneer optical drives do not handle low
power modes correctly. If these optical drives would have been tested
on another AHCI controller using the board_ahci_low_power configuration,
this issue would have been detected earlier.
Unfortunately, the board_ahci_low_power configuration is only used in
less than 15% of the total AHCI controller entries, so many devices
have never been tested with an AHCI controller with low power modes.
Fixes: 1527f69204 ("ata: ahci: Add Green Sardine vendor ID as board_ahci_mobile")
Cc: stable@vger.kernel.org
Reported-by: Jaap Berkhout <j.j.berkhout@staalenberk.nl>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Performing a revalidation on a AHCI controller supporting LPM,
while using a lpm mode of e.g. med_power_with_dip (hipm + dipm) or
medium_power (hipm), will currently always lead to a hard reset.
The expected behavior is that a hard reset is only performed when
revalidate fails, because the properties of the drive has changed.
A revalidate performed after e.g. a NCQ error, or such a simple thing
as disabling write-caching (hdparm -W 0 /dev/sda), should succeed on
the first try (and should therefore not cause the link to be reset).
This unwarranted hard reset happens because ata_phys_link_offline()
returns true for a link that is in deep sleep. Thus the call to
ata_phys_link_offline() in ata_eh_revalidate_and_attach() will cause
the revalidation to fail, which causes ata_eh_handle_dev_fail() to be
called, which will set ehc->i.action |= ATA_EH_RESET, such that the
link is reset before retrying revalidation.
When the link is reset, the link is reestablished, so when
ata_eh_revalidate_and_attach() is called the second time, directly
after the link has been reset, ata_phys_link_offline() will return
false, and the revalidation will succeed.
Looking at "8.3.1.3 HBA Initiated" in the AHCI 1.3.1 specification,
it is clear the when host software writes a new command to memory,
by setting a bit in the PxCI/PxSACT HBA port registers, the HBA will
automatically bring back the link before sending out the Command FIS.
However, simply reading a SCR (like ata_phys_link_offline() does),
will not cause the HBA to automatically bring back the link.
As long as hipm is enabled, the HBA will put an idle link into deep
sleep. Avoid this needless hard reset on revalidation by temporarily
disabling hipm, by setting the LPM mode to ATA_LPM_MAX_POWER.
After revalidation is complete, ata_eh_recover() will restore the link
policy by setting the LPM mode to ap->target_lpm_policy.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
The parameter can easily be derived from struct ata_queued_cmd.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
The parameter can easily be derived from struct ata_queued_cmd.
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Return the value ata_port_abort() directly instead of storing it in
another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Remove the unused variable dev in st_ahci_probe() to avoid compilation
warning and build failures where CONFIG_WERROR is enabled.
Fixes: 3f74cd046f ("ata: libahci_platform: Parse ports-implemented property in resources getter")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
It's almost fully compatible DWC AHCI SATA IP-core derivative except the
reference clocks source, which need to be very carefully selected. In
particular the DWC AHCI SATA PHY can be clocked either from the pads
ref_pad_clk_{m,p} or from the internal wires ref_alt_clk_{m,n}. In the
later case the clock signal is generated from the Baikal-T1 CCU SATA PLL.
The clocks source is selected by means of the ref_use_pad wire connected
to the CCU SATA reference clock CSR.
In normal situation it would be much more handy to use the internal
reference clock source, but alas we haven't managed to make the AHCI
controller working well with it so far. So it's preferable to have the
controller clocked from the external clock generator and fallback to the
internal clock source only as a last resort. Other than that the
controller is full compatible with the DWC AHCI SATA IP-core.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Some DWC AHCI SATA IP-core derivatives require to perform small platform
or IP-core specific setups. They are too small to be placed in a dedicated
driver. It's just much easier to have a set of quirks for them right in
the DWC AHCI driver code. Since we are about to add such platform support,
as a pre-requisite we introduce a platform-data based DWC AHCI quirks API.
The platform data can be used to define the flags passed to the
ahci_platform_get_resources() method, additional AHCI host-flags and a set
of callbacks to initialize, re-initialize and clear the platform settings.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Synopsys AHCI SATA controller can work pretty under with the generic
AHCI-platform driver control. But there are vendor-specific peculiarities
which can tune the device performance up and which may need to be fixed up
for proper device functioning. In addition some DWC AHCI-based controllers
may require small platform-specific fixups, so adding them in the generic
AHCI driver would have ruined the code simplicity. Shortly speaking in
order to keep the generic AHCI-platform code clean and have DWC AHCI
SATA-specific features supported we suggest to add a dedicated DWC AHCI
SATA device driver. Aside with the standard AHCI-platform resources
getting, enabling/disabling and the controller registration the new driver
performs the next actions.
First of all there is a way to verify whether the HBA/ports capabilities
activated in OF are correct. Almost all features availability is reflected
in the vendor-specific parameters registers. So the DWC AHCI driver does
the capabilities sanity check based on the corresponding fields state.
Secondly if either the Command Completion Coalescing or the Device Sleep
feature is enabled the DWC AHCI-specific internal 1ms timer must be fixed
in accordance with the application clock signal frequency. In particular
the timer value must be set to be Fapp * 1000. Normally the SoC designers
pre-configure the TIMER1MS register to contain a correct value by default.
But the platforms can support the application clock rate change. If that
happens the 1ms timer value must be accordingly updated otherwise the
dependent features won't work as expected. In the DWC AHCI driver we
suggest to rely on the "aclk" reference clock rate to set the timer
interval up. That clock source is supposed to be the AHCI SATA application
clock in accordance with the DT bindings.
Finally DWC AHCI SATA controller AXI/AHB bus DMA-engine can be tuned up to
transfer up to 1024 * FIFO words at a time by setting the Tx/Rx
transaction size in the DMA control register. The maximum value depends on
the DMA data bus and AXI/AHB bus maximum burst length. In most of the
cases it's better to set the maximum possible value to reach the best AHCI
SATA controller performance. But sometimes in order to improve the system
interconnect responsiveness, transferring in smaller data chunks may be
more preferable. For such cases and for the case when the default value
doesn't provide the best DMA bus performance we suggest to use the new
HBA-port specific DT-properties "snps,{tx,rx}-ts-max" to tune the DMA
transactions size up.
After all the settings denoted above are handled the DWC AHCI SATA driver
proceeds further with the standard AHCI-platform host initializations.
Note since DWC AHCI controller is now have a dedicated driver we can
discard the corresponding compatible string from the ahci-platform.c
module. The same concerns "snps,spear-ahci" compatible string, which is
also based on the DWC AHCI IP-core.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Since all the clocks are retrieved by the method
ahci_platform_get_resources() there is no need for the LLD (glue) drivers
to be looking for some particular of them in the kernel clocks table
again. Instead we suggest to add a simple method returning a
device-specific clock with passed connection ID if it is managed to be
found. Otherwise the function will return NULL. Thus the glue-drivers
won't need to either manually touching the hpriv->clks array or calling
clk_get()-friends. The AHCI platform drivers will be able to use the new
function right after the ahci_platform_get_resources() method invocation
and up to the device removal.
Note the method is left unused here, but will be utilized in the framework
of the DWC AHCI SATA driver being added in the next commit.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
There are systems with no BIOS or comprehensive embedded firmware which
could be able to properly initialize the SATA AHCI controller
platform-specific capabilities. In that case a good alternative to having
a clever bootloader is to create a device tree node with the properties
well describing all the AHCI-related platform specifics. All the settings
which are normally detected and marked as available in the HBA and its
ports capabilities fields [1] could be defined in the platform DTB by
means of a set of the dedicated properties. Such approach perfectly fits
to the DTB-philosophy - to provide hardware/platform description.
So here we suggest to extend the SATA AHCI device tree bindings with two
additional DT-properties:
1) "hba-cap" - HBA platform generic capabilities like:
- SSS - Staggered Spin-up support.
- SMPS - Mechanical Presence Switch support.
2) "hba-port-cap" - HBA platform port capabilities like:
- HPCP - Hot Plug Capable Port.
- MPSP - Mechanical Presence Switch Attached to Port.
- CPD - Cold Presence Detection.
- ESP - External SATA Port.
- FBSCP - FIS-based Switching Capable Port.
All of these capabilities require to have a corresponding hardware
configuration. Thus it's ok to have them defined in DTB.
Even though the driver currently takes into account the state of the ESP
and FBSCP flags state only, there is nothing wrong with having all of them
supported by the generic AHCI library in order to have a complete OF-based
platform-capabilities initialization procedure. These properties will be
parsed in the ahci_platform_get_resources() method and their values will
be stored in the saved_* fields of the ahci_host_priv structure, which in
its turn then will be used to restore the H.CAP, H.PI and P#.CMD
capability fields on device init and after HBA reset.
Please note this modification concerns the HW-init HBA and its ports flags
only, which are by specification [1] are supposed to be initialized by the
BIOS/platform firmware/expansion ROM and which are normally declared in
the one-time-writable-after-reset register fields. Even though these flags
aren't supposed to be cleared after HBA reset some AHCI instances may
violate that rule so we still need to perform the fields resetting after
each reset. Luckily the corresponding functionality has already been
partly implemented in the framework of the ahci_save_initial_config() and
ahci_restore_initial_config() methods.
[1] Serial ATA AHCI 1.3.1 Specification, p. 103
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
The port base address may be required even before the ata_host instance is
initialized and activated, for instance in the ahci_save_initial_config()
method which we are about to update (consider this modification as a
preparation for that one). Seeing the __ahci_port_base() function isn't
used much it's the best candidate to provide the required functionality.
So let's convert it to accepting the ahci_host_priv structure pointer.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
There is no point in reading the AHCI version all over in the tail of the
ahci_save_initial_config() method. That register is RO and doesn't change
its value even after reset. So just reuse the data, which has already been
read from there earlier in the head of the function.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Currently there are four port-map-related fields declared in the
ahci_host_priv structure and used to setup the HBA ports mapping. First
the ports-mapping is read from the PI register and immediately stored in
the saved_port_map field. If forced_port_map is initialized with non-zero
value then its value will have greater priority over the value read from
PI, thus it will override the saved_port_map field. That value will be
then masked by a non-zero mask_port_map field and after some sanity checks
it will be stored in the ahci_host_priv.port_map field as a final port
mapping.
As you can see the logic is a bit too complicated for such a simple task.
We can freely get rid from at least one of the fields with no change to
the implemented semantic. The force_port_map field can be replaced with
taking non-zero saved_port_map value into account. So if saved_port_map is
pre-initialized by the low level drivers (platform drivers) then it will
have greater priority over the value read from PI register and will be
used as actual HBA ports mapping later on. Thus the ports map forcing task
will be just transferred from force_port_map to the saved_port_map field.
This modification will perfectly fit into the feature of having OF-based
initialization of the HW-init HBA CSR fields we are about to introduce in
the next commit.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Currently not all of the Port-specific capabilities listed in the
PORT_CMD-enumeration. Let's extend that set with the Cold Presence
Detection and Mechanical Presence Switch attached to the Port flags [1] so
to closeup the set of the platform-specific port-capabilities flags. Note
these flags are supposed to be set by the platform firmware if there is
one. Alternatively as we are about to do they can be set by means of the
OF properties.
While at it replace PORT_IRQ_DEV_ILCK with PORT_IRQ_DMPS and fix the
comment there. In accordance with [2] that IRQ flag is supposed to
indicate the state of the signal coming from the Mechanical Presence
Switch.
[1] Serial ATA AHCI 1.3.1 Specification, p.27
[2] Serial ATA AHCI 1.3.1 Specification, p.24, p.88
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Currently the ACHI-platform library supports only the assert and deassert
reset signals and ignores the platforms with self-deasserting reset lines.
That prone to having the platforms with self-deasserting reset method
misbehaviour when it comes to resuming from sleep state after the clocks
have been fully disabled. For such cases the controller needs to be fully
reset all over after the reference clocks are enabled and stable,
otherwise the controller state machine might be in an undetermined state.
The best solution would be to auto-detect which reset method is supported
by the particular platform and use it implicitly in the framework of the
ahci_platform_enable_resources()/ahci_platform_disable_resources()
methods. Alas it can't be implemented due to the AHCI-platform library
already supporting the shared reset control lines. As [1] says in such
case we have to use only one of the next methods:
+ reset_control_assert()/reset_control_deassert();
+ reset_control_reset()/reset_control_rearm().
If the driver had an exclusive control over the reset lines we could have
been able to manipulate the lines with no much limitation and just used
the combination of the methods above to cover all the possible
reset-control cases. Since the shared reset control has already been
advertised and couldn't be changed with no risk to breaking the platforms
relying on it, we have no choice but to make the platform drivers to
determine which reset methods the platform reset system supports.
In order to implement both types of reset control support we suggest to
introduce the new AHCI-platform flag: AHCI_PLATFORM_RST_TRIGGER, which
when passed to the ahci_platform_get_resources() method together with the
AHCI_PLATFORM_GET_RESETS flag will indicate that the reset lines are
self-deasserting thus the reset_control_reset()/reset_control_rearm() will
be used to control the reset state. Otherwise the
reset_control_deassert()/reset_control_assert() methods will be utilized.
[1] Documentation/driver-api/reset.rst
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
The ports-implemented property is mainly used on the OF-based platforms
with no ports mapping initialized by a bootloader/BIOS firmware. Seeing
the same of_property_read_u32()-based pattern has already been implemented
in the generic AHCI LLDD (glue) driver and in the Mediatek, St AHCI
drivers let's move the property read procedure to the generic
ahci_platform_get_resources() method. Thus we'll have the forced ports
mapping feature supported for each OF-based platform which requires that,
and stop re-implementing the same pattern in there a bit simplifying the
code.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Having greater than AHCI_MAX_PORTS (32) ports detected isn't that critical
from the further AHCI-platform initialization point of view since
exceeding the ports upper limit will cause allocating more resources than
will be used afterwards. But detecting too many child DT-nodes doesn't
seem right since it's very unlikely to have it on an ordinary platform. In
accordance with the AHCI specification there can't be more than 32 ports
implemented at least due to having the CAP.NP field of 5 bits wide and the
PI register of dword size. Thus if such situation is found the DTB must
have been corrupted and the data read from it shouldn't be reliable. Let's
consider that as an erroneous situation and halt further resources
allocation.
Note it's logically more correct to have the nports set only after the
initialization value is checked for being sane. So while at it let's make
sure nports is assigned with a correct value.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
In order to simplify the clock-related code there is a way to convert the
current fixed clocks array into using the common bulk clocks kernel API
with dynamic set of the clock handlers and device-managed clock-resource
tracking. It's a bit tricky due to the complication coming from the
requirement to support the platforms (da850, spear13xx) with the
non-OF-based clock source, but still doable.
Before this modification there are two methods have been used to get the
clocks connected to an AHCI device: clk_get() - to get the very first
clock in the list and of_clk_get() - to get the rest of them. Basically
the platforms with non-OF-based clocks definition could specify only a
single reference clock source. The platforms with OF-hw clocks have been
luckier and could setup up to AHCI_MAX_CLKS clocks. Such semantic can be
retained with using devm_clk_bulk_get_all() to retrieve the clocks defined
via the DT firmware and devm_clk_get_optional() otherwise. In both cases
using the device-managed version of the methods will cause the automatic
resources deallocation on the AHCI device removal event. The only
complicated part in the suggested approach is the explicit allocation and
initialization of the clk_bulk_data structure instance for the non-OF
reference clocks. It's required in order to use the Bulk Clocks API for
the both denoted cases of the clocks definition.
Note aside with the clock-related code reduction and natural
simplification, there are several bonuses the suggested modification
provides. First of all the limitation of having no greater than
AHCI_MAX_CLKS clocks is now removed, since the devm_clk_bulk_get_all()
method will allocate as many reference clocks data descriptors as there
are clocks specified for the device. Secondly the clock names are
auto-detected. So the LLDD (glue) drivers can make sure that the required
clocks are specified just by checking the clock IDs in the clk_bulk_data
array. Thirdly using the handy Bulk Clocks kernel API improves the
clocks-handling code readability. And the last but not least this
modification implements a true optional clocks support to the
ahci_platform_get_resources() method. Indeed the previous clocks getting
procedure just stopped getting the clocks on any errors (aside from
non-critical -EPROBE_DEFER) in a way so the callee wasn't even informed
about abnormal loop termination. The new implementation lacks of such
problem. The ahci_platform_get_resources() will return an error code if
the corresponding clocks getting method ends execution abnormally.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Currently the IOMEM AHCI registers space is mapped by means of the
two functions invocation: platform_get_resource() is used to get the very
first memory resource and devm_ioremap_resource() is called to remap that
resource. Device-managed kernel API provides a handy wrapper to perform
the same in single function call: devm_platform_ioremap_resource().
While at it seeing many AHCI platform drivers rely on having the AHCI CSR
space marked with "ahci" name let's first try to find and remap the CSR
IO-mem with that name and only if it fails fallback to getting the very
first registers space platform resource.
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
It is currently possible to select "Generic platform device PATA support"
in two situations:
- architecture allows the generic platform device PATA support and
indicates that with "select HAVE_PATA_PLATFORM".
- if the user claims to be an EXPERT by setting CONFIG_EXPERT to yes
However, there is no use case to have Generic platform device PATA support
in a kernel build if the architecture definition, i.e., the selection of
configs by an architecture, does not support it.
If the architecture definition is wrong, i.e., it just misses a 'select
HAVE_PATA_PLATFORM', then even an expert that configures the kernel build
should not just fix that by overruling the claimed support by an
architecture. If the architecture definition is wrong, the expert should
just provide a patch to correct the architecture definition instead---in
the end, if the user is an expert, sending a quick one-line patch should
not be an issue.
In other words, I do not see the deeper why an expert can overrule the
architecture definition in this case, as the expert may not overrule the
config selections defined by the architecture in the large majority
---or probably all other (modulo some mistakes)---of similar cases.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
There are two options for platform device PATA support:
PATA_PLATFORM: Generic platform device PATA support
PATA_OF_PLATFORM: OpenFirmware platform device PATA support
If an architecture allows the generic platform device PATA support, it
shall select HAVE_PATA_PLATFORM. Then, Generic platform device PATA support
is available and can be selected.
If an architecture has OpenFirmware support, which it indicates by
selecting OF, OpenFirmware platform device PATA support is available
and can be selected.
If OpenFirmware platform device PATA support is selected, then the
functionality (code files) from Generic platform device PATA support needs
to be integrated in the kernel build for the OpenFirmware platform device
PATA support to work. Select PATA_PLATFORM in PATA_OF_PLATFORM to make sure
the needed files are added in the build.
So, architectures with OpenFirmware support, do not need to additionally
select HAVE_PATA_PLATFORM. It is only needed by architecture that want the
non-OF pata-platform module.
Reflect this way of intended use of config symbols in the ata Kconfig and
adjust all architecture definitions.
This follows the suggestion from Arnd Bergmann (see Link).
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/all/4b33bffc-2b6d-46b4-9f1d-d18e55975a5a@www.fastmail.com/
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
sata_scr_read() could return negative error code on failure. Check the
return value when reading the control register.
Signed-off-by: Li Zhong <floridsleeves@gmail.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Remove the repeated word "Transfer" in comments.
Signed-off-by: Shaomin Deng <dengshaomin@cdjrlc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
There is unneeded word "to" in line 669, so remove it.
Signed-off-by: Shaomin Deng <dengshaomin@cdjrlc.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Since ata_build_rw_tf() is only called from ata_scsi_rw_xlat() with the
tf, dev and tag arguments obtained from the queued command structure,
we can simplify the interface of ata_build_rw_tf() by passing directly
the qc structure as argument.
Furthermore, since ata_scsi_rw_xlat() is never used for internal
commands, we can also remove the internal tag check for the NCQ case.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Rename ATA_DFLAG_NCQ_PRIO_ENABLE to ATA_DFLAG_NCQ_PRIO_ENABLED to match
the fact that this flags indicates if NCQ priority use is enabled by the
user.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Return value from ata_exec_internal() directly instead of
taking this in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Jinpeng Cui <cui.jinpeng2@zte.com.cn>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
The ACPI_FADT_LOW_POWER_S0 flag merely means that it is better to
use low-power S0 idle on the given platform than S3 (provided that
the latter is supported) and it doesn't preclude using either of
them (which of them will be used depends on the choices made by user
space).
For this reason, there is no benefit from checking that flag in
ahci_update_initial_lpm_policy().
First off, it cannot be a bug to do S3 with policy set to either
ATA_LPM_MIN_POWER_WITH_PARTIAL or ATA_LPM_MIN_POWER, because S3 can be
used on systems with ACPI_FADT_LOW_POWER_S0 set and it must work if
really supported, so the ACPI_FADT_LOW_POWER_S0 check is not needed to
protect the S3-capable systems from failing.
Second, suspend-to-idle can be carried out on a system with
ACPI_FADT_LOW_POWER_S0 unset and it is expected to work, so if setting
policy to either ATA_LPM_MIN_POWER_WITH_PARTIAL or ATA_LPM_MIN_POWER is
needed to handle that case correctly, it should be done regardless of
the ACPI_FADT_LOW_POWER_S0 value.
Accordingly, replace the ACPI_FADT_LOW_POWER_S0 check in
ahci_update_initial_lpm_policy() with pm_suspend_default_s2idle()
which is more general and also takes the user's preference into
account and drop the CONFIG_ACPI #ifdef around it that is not necessary
any more.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
new API and remove the old OF code (Daniel Lezcano)
- Fix return value to -ENODEV when searching for a specific thermal
zone which does not exist (Daniel Lezcano)
- Fix the return value inspection in of_thermal_zone_find() (Dan
Carpenter)
- Fix kernel panic when kasan is enabled as it detects an use after
free when unregistering a thermal zone (Daniel Lezcano)
- Move the set_trip ops inside the therma sysfs code (Daniel Lezcano)
- Remove unnecessary error message as it is already showed in the
underlying function (Jiapeng Chong)
- Rework the monitoring path and move the locks upper in the call
stack to fix some potentials race windows (Daniel Lezcano)
- Fix lockdep_assert() warning introduced by the lock rework (Daniel
Lezcano)
- Revert the Mellanox 'hotter thermal zone' feature because it is
already handled in the thermal framework core code (Daniel Lezcano)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmMEyhwACgkQqDIjiipP
6E8+AAf/QFLCn1CzLsWCvHC+i4+CjoX/d/1ZhX24mZm17llBdSP5zGxlCVNCRAk/
xabT62WUbRsIzG0lCYAGUYXDUQf6qjs1QJ/fMZxtwoyHJA0yc3BtIlhxlnezpcA/
Dvfu0gu3NaZvf/yIl+PWrEJP6ZXmPzpiiYdtCZIReB+L1XR0tSJ49bxP+QIaN5JH
EXOmO0Y0XLG9jGshUS4xJrej9QQcTvgpbLGy/QLS43sdmmXHOkfbjvl1i4CPFeo3
14ENCsGm5wXAS1UHDRluoasgPUXTlG809aVzeh6pBcHzWn/90K8XeNA+lCbL8k23
hiXrpYX2Xhgy1vibyB7DW1bzQYOYxQ==
=wF0H
-----END PGP SIGNATURE-----
Merge tag 'thermal-v6.1-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal control changes for v6.1-rc1 from Daniel Lezcano:
"- Rework the device tree initialization, convert the drivers to the
new API and remove the old OF code (Daniel Lezcano)
- Fix return value to -ENODEV when searching for a specific thermal
zone which does not exist (Daniel Lezcano)
- Fix the return value inspection in of_thermal_zone_find() (Dan
Carpenter)
- Fix kernel panic when KASAN is enabled as it detects use after
free when unregistering a thermal zone (Daniel Lezcano)
- Move the set_trip ops inside the therma sysfs code (Daniel Lezcano)
- Remove unnecessary error message as it is already showed in the
underlying function (Jiapeng Chong)
- Rework the monitoring path and move the locks upper in the call
stack to fix some potentials race windows (Daniel Lezcano)
- Fix lockdep_assert() warning introduced by the lock rework (Daniel
Lezcano)
- Revert the Mellanox 'hotter thermal zone' feature because it is
already handled in the thermal framework core code (Daniel Lezcano)"
* tag 'thermal-v6.1-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (46 commits)
Revert "mlxsw: core: Add the hottest thermal zone detection"
thermal/core: Fix lockdep_assert() warning
thermal/core: Move the mutex inside the thermal_zone_device_update() function
thermal/core: Move the thermal zone lock out of the governors
thermal/governors: Group the thermal zone lock inside the throttle function
thermal/core: Rework the monitoring a bit
thermal/core: Rearm the monitoring only one time
thermal/drivers/qcom/spmi-adc-tm5: Remove unnecessary print function dev_err()
thermal/of: Remove old OF code
thermal/core: Move set_trip_temp ops to the sysfs code
thermal/drivers/samsung: Switch to new of thermal API
regulator/drivers/max8976: Switch to new of thermal API
Input: sun4i-ts - switch to new of thermal API
iio/drivers/sun4i_gpadc: Switch to new of thermal API
hwmon/drivers/core: Switch to new of thermal API
hwmon: pm_bus: core: Switch to new of thermal API
ata/drivers/ahci_imx: Switch to new of thermal API
thermal/drivers/ti-soc: Switch to new of API
thermal/drivers/hisilicon: Switch to new of API
thermal/drivers/maxim: Switch to new of API
...
