Handle case when module is unloaded (kfd_exit) before a process space
(mm_struct) is released.
v2: Fixed potential race conditions by removing all kfd_process from
the process table first, then working on releasing the resources.
v3: Fixed loop element access / synchronization. Fixed extra empty lines.
Signed-off-by: David Belanger <david.belanger@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As a temporary storage, staged_config[] in rdt_domain should be cleared
before and after it is used. The stale value in staged_config[] could
cause an MSR access error.
Here is a reproducer on a system with 16 usable CLOSIDs for a 15-way L3
Cache (MBA should be disabled if the number of CLOSIDs for MB is less than
16.) :
mount -t resctrl resctrl -o cdp /sys/fs/resctrl
mkdir /sys/fs/resctrl/p{1..7}
umount /sys/fs/resctrl/
mount -t resctrl resctrl /sys/fs/resctrl
mkdir /sys/fs/resctrl/p{1..8}
An error occurs when creating resource group named p8:
unchecked MSR access error: WRMSR to 0xca0 (tried to write 0x00000000000007ff) at rIP: 0xffffffff82249142 (cat_wrmsr+0x32/0x60)
Call Trace:
<IRQ>
__flush_smp_call_function_queue+0x11d/0x170
__sysvec_call_function+0x24/0xd0
sysvec_call_function+0x89/0xc0
</IRQ>
<TASK>
asm_sysvec_call_function+0x16/0x20
When creating a new resource control group, hardware will be configured
by the following process:
rdtgroup_mkdir()
rdtgroup_mkdir_ctrl_mon()
rdtgroup_init_alloc()
resctrl_arch_update_domains()
resctrl_arch_update_domains() iterates and updates all resctrl_conf_type
whose have_new_ctrl is true. Since staged_config[] holds the same values as
when CDP was enabled, it will continue to update the CDP_CODE and CDP_DATA
configurations. When group p8 is created, get_config_index() called in
resctrl_arch_update_domains() will return 16 and 17 as the CLOSIDs for
CDP_CODE and CDP_DATA, which will be translated to an invalid register -
0xca0 in this scenario.
Fix it by clearing staged_config[] before and after it is used.
[reinette: re-order commit tags]
Fixes: 75408e4350 ("x86/resctrl: Allow different CODE/DATA configurations to be staged")
Suggested-by: Xin Hao <xhao@linux.alibaba.com>
Signed-off-by: Shawn Wang <shawnwang@linux.alibaba.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Reinette Chatre <reinette.chatre@intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/2fad13f49fbe89687fc40e9a5a61f23a28d1507a.1673988935.git.reinette.chatre%40intel.com
[Why]
Framedrops are observed while playing Vp9 and Av1 10 bit
video on 8k resolution using VSR while playback controls
are disappeared/appeared
[How]
Now ODM 2 to 1 is disabled for 5k or greater resolutions on VSR.
Cc: stable@vger.kernel.org
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Ayush Gupta <ayugupta@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
In USB4 DP tunneling, it's possible to have this scenario that
the path becomes unavailable and CM tears down the path a little bit late.
So, in this case, the HPD is high but fails to read any DPCD register.
That causes the link connection type to be set to sst.
And not all sinks are removed behind the MST branch.
[How]
Restore the link connection type if it fails to read DPCD register.
Cc: stable@vger.kernel.org
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Cruise Hung <Cruise.Hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Writing to DRR registers such as OTG_V_TOTAL_MIN on the same frame as a
pipe commit can cause underflow.
Cc: stable@vger.kernel.org
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Hot plugging and then hot unplugging leads to k1 and k2 values to
change, as signal is detected as a virtual signal on hot unplug. Writing
these values to OTG_PIXEL_RATE_DIV register might cause primary display
to blank (known hw bug).
[HOW]
No longer write k1 and k2 values to register if signal is virtual, we
have safe guards in place in the case that k1 and k2 is unassigned so
that an unknown value is not written to the register either.
Cc: stable@vger.kernel.org
Cc: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Samson Tam <Samson.Tam@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Saaem Rizvi <SyedSaaem.Rizvi@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Events should only be added to a groups rb tree if they have not been
removed from their context by list_del_event(). Since remove_on_exec
made it possible to call list_del_event() on individual events before
they are detached from their group, perf_group_detach() should check each
sibling's attach_state before calling add_event_to_groups() on it.
Fixes: 2e498d0a74 ("perf: Add support for event removal on exec")
Signed-off-by: Budimir Markovic <markovicbudimir@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/ZBFzvQV9tEqoHEtH@gentoo
Time readers rely on perf_event_context->[time|timestamp|timeoffset] to get
accurate time_enabled and time_running for an event. The difference between
ctx->timestamp and ctx->time is the among of time when the context is not
enabled. __update_context_time(ctx, false) is used to increase timestamp,
but not time. Therefore, it should only be called in ctx_sched_in() when
EVENT_TIME was not enabled.
Fixes: 09f5e7dc7a ("perf: Fix perf_event_read_local() time")
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/r/20230313171608.298734-1-song@kernel.org
syzkaller reportes a KASAN issue with stack-out-of-bounds.
The call trace is as follows:
dump_stack+0x9c/0xd3
print_address_description.constprop.0+0x19/0x170
__kasan_report.cold+0x6c/0x84
kasan_report+0x3a/0x50
__perf_event_header__init_id+0x34/0x290
perf_event_header__init_id+0x48/0x60
perf_output_begin+0x4a4/0x560
perf_event_bpf_output+0x161/0x1e0
perf_iterate_sb_cpu+0x29e/0x340
perf_iterate_sb+0x4c/0xc0
perf_event_bpf_event+0x194/0x2c0
__bpf_prog_put.constprop.0+0x55/0xf0
__cls_bpf_delete_prog+0xea/0x120 [cls_bpf]
cls_bpf_delete_prog_work+0x1c/0x30 [cls_bpf]
process_one_work+0x3c2/0x730
worker_thread+0x93/0x650
kthread+0x1b8/0x210
ret_from_fork+0x1f/0x30
commit 267fb27352 ("perf: Reduce stack usage of perf_output_begin()")
use on-stack struct perf_sample_data of the caller function.
However, perf_event_bpf_output uses incorrect parameter to convert
small-sized data (struct perf_bpf_event) into large-sized data
(struct perf_sample_data), which causes memory overwriting occurs in
__perf_event_header__init_id.
Fixes: 267fb27352 ("perf: Reduce stack usage of perf_output_begin()")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20230314044735.56551-1-yangjihong1@huawei.com
This kselftest fixes update for Linux 6.3-rc3 consists of a fix to
amd-pstate test Makefile and a fix to LLVM build for i386 and x86_64
in kselftest common lib.mk.
-----BEGIN PGP SIGNATURE-----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=ITKW
-----END PGP SIGNATURE-----
Merge tag 'linux-kselftest-fixes-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"A fix to amd-pstate test Makefile and a fix to LLVM build for x86 in
kselftest common lib.mk"
* tag 'linux-kselftest-fixes-6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: fix LLVM build for i386 and x86_64
selftests: amd-pstate: fix TEST_FILES
Pull MD fixes from Song:
"This set contains two fixes for old issues (by Neil) and one fix
for 6.3 (by Xiao)."
* 'md-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md:
md: select BLOCK_LEGACY_AUTOLOAD
md: avoid signed overflow in slot_store()
md: Free resources in __md_stop
When BLOCK_LEGACY_AUTOLOAD is not enable, mdadm is not able to
activate new arrays unless "CREATE names=yes" appears in
mdadm.conf
As this is a regression we need to always enable BLOCK_LEGACY_AUTOLOAD
for when MD is selected - at least until mdadm is updated and the
updates widely available.
Cc: stable@vger.kernel.org # v5.18+
Fixes: fbdee71bb5 ("block: deprecate autoloading based on dev_t")
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Song Liu <song@kernel.org>
While using iostat for raid, I observed very strange 'await'
occasionally, and turns out it's due to that 'ios' and 'sectors' is
counted in bdev_start_io_acct(), while 'nsecs' is counted in
bdev_end_io_acct(). I'm not sure why they are ccounted like that
but I think this behaviour is obviously wrong because user will get
wrong disk stats.
Fix the problem by counting 'ios' and 'sectors' when io is done, like
what rq-based device does.
Fixes: 394ffa503b ("blk: introduce generic io stat accounting help function")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230223091226.1135678-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In vdc_port_probe(), we should check the return value of mdesc_grab() as
it may return NULL, which can cause potential NPD bug.
Fixes: 43fdf27470 ("[SPARC64]: Abstract out mdesc accesses for better MD update handling.")
Signed-off-by: Liang He <windhl@126.com>
Link: https://lore.kernel.org/r/20230315062032.1741692-1-windhl@126.com
[axboe: style cleanup]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
An nvme target ->queue_response() operation implementation may free the
request passed as argument. Such implementation potentially could result
in a use after free of the request pointer when percpu_ref_put() is
called in nvmet_req_complete().
Avoid such problem by using a local variable to save the sq pointer
before calling __nvmet_req_complete(), thus avoiding dereferencing the
req pointer after that function call.
Fixes: a07b4970f4 ("nvmet: add a generic NVMe target")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We have more commands to show in the trace. Sync up.
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Make sure that we don't somehow mess up the wire structures in the spec.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kkch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
For non in-capsule writes we reuse the request pdu space for a h2cdata
pdu in order to avoid over allocating space (either preallocate or
dynamically upon receving an r2t pdu). However if the request times out
the core expects to find the opcode in the start of the request, which
we override.
In order to prevent that, without sacrificing additional 24 bytes per
request, we just use the tail of the command pdu space instead (last
24 bytes from the 72 bytes command pdu). That should make the command
opcode always available, and we get away from allocating more space.
If in the future we would need the last 24 bytes of the nvme command
available we would need to allocate a dedicated space for it in the
request, but until then we can avoid doing so.
Reported-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kkch@nvidia.com>
Tested-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
In case the nvme_probe teardown path is triggered the ctrl ref count does
not reach 0 thus creating a memory leak upon failure of nvme_probe.
Signed-off-by: Irvin Cote <irvincoteg@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When investigating one customer report on warning in nvme_setup_discard,
we observed the controller(nvme/tcp) actually exposes
queue_max_discard_segments(req->q) == 1.
Obviously the current code can't handle this situation, since contiguity
merge like normal RW request is taken.
Fix the issue by building range from request sector/nr_sectors directly.
Fixes: b35ba01ea6 ("nvme: support ranged discard requests")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The T: entries shall be composed of a SCM tree type (git, hg, quilt, stgit
or topgit) and location.
Add the SCM tree type to the T: entry, and reorder the file entries in
alphabetical order.
Fixes: b508fc354f ("nvme: update maintainers information")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Users may specify a CPU where the sqpoll thread would run. This may
conflict with cpuset operations because of strict PF_NO_SETAFFINITY
requirement. That flag is unnecessary for polling "kernel" threads, see
the reasoning in commit 01e68ce08a ("io_uring/io-wq: stop setting
PF_NO_SETAFFINITY on io-wq workers"). Drop the flag on poll threads too.
Fixes: 01e68ce08a ("io_uring/io-wq: stop setting PF_NO_SETAFFINITY on io-wq workers")
Link: https://lore.kernel.org/all/20230314162559.pnyxdllzgw7jozgx@blackpad/
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Link: https://lore.kernel.org/r/20230314183332.25834-1-mkoutny@suse.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Use a local struct request pointer variable to avoid having to
dereference struct blk_mq_queue_data multiple times. While at it, also
fix the function argument indentation and remove a useless "else" after
a return.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Pankaj Raghav <p.raghav@samsung.com>
Link: https://lore.kernel.org/r/20230314041106.19173-2-damien.lemoal@opensource.wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When injecting a fake timeout into the null_blk driver using
fail_io_timeout, the request timeout handler does not execute
blk_mq_complete_request(), so the complete callback is never executed
for a timedout request.
The null_blk driver also has a driver-specific fake timeout mechanism
which does not have this problem. Fix the problem with fail_io_timeout
by using the same meachanism as null_blk internal timeout feature, using
the fake_timeout field of null_blk commands.
Reported-by: Akinobu Mita <akinobu.mita@gmail.com>
Fixes: de3510e52b ("null_blk: fix command timeout completion handling")
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20230314041106.19173-2-damien.lemoal@opensource.wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
To support detection of read faults with Radix execute-only memory, the
vma_is_accessible() check in access_error() (which checks for PROT_NONE)
was replaced with a check to see if VM_READ was missing, and if so,
returns true to assert the fault was caused by a bad read.
This is incorrect, as it ignores that both VM_WRITE and VM_EXEC imply
read on powerpc, as defined in protection_map[]. This causes mappings
containing VM_WRITE or VM_EXEC without VM_READ to misreport the cause of
page faults, since the MMU is still allowing reads.
Correct this by restoring the original vma_is_accessible() check for
PROT_NONE mappings, and adding a separate check for Radix PROT_EXEC-only
mappings.
Fixes: 395cac7752 ("powerpc/mm: Support execute-only memory on the Radix MMU")
Reported-by: Michal Suchánek <msuchanek@suse.de>
Link: https://lore.kernel.org/r/20230308152702.GR19419@kitsune.suse.cz
Tested-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230310050834.63105-1-ruscur@russell.cc
devm_regulator_get_enable_optional() returns -ENODEV if requested
optional regulator is not present. Adjust code for that, because in the
67d0a30128 I've incorrectly assumed that it also returns 0 when
regulator is not present.
Reported-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
Fixes: 67d0a30128 ("drm/meson: dw-hdmi: Fix devm_regulator_*get_enable*() conversion")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230309152446.104913-1-m.szyprowski@samsung.com
The returned array size for input formats is set through
atomic_get_input_bus_fmts()'s 'num_input_fmts' argument, so use
'num_input_fmts' to represent the array size in the function's kdoc,
not 'num_output_fmts'.
Fixes: 91ea83306b ("drm/bridge: Fix the bridge kernel doc")
Fixes: f32df58acc ("drm/bridge: Add the necessary bits to support bus format negotiation")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230314055035.3731179-1-victor.liu@nxp.com
Daniel Golle says:
====================
net: ethernet: mtk_eth_soc: minor SGMII fixes
This small series brings two minor fixes for the SGMII unit found in
MediaTek's router SoCs.
The first patch resets the PCS internal state machine on major
configuration changes, just like it is also done in MediaTek's SDK.
The second patch makes sure we only write values and restart AN if
actually needed, thus preventing unnesseray loss of an existing link
in some cases.
Both patches have previously been submitted as part of the series
"net: ethernet: mtk_eth_soc: various enhancements" which grew a bit
too big and it has correctly been criticized that some of the patches
should rather go as fixes to net-next.
This new series tries to address this.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Only restart auto-negotiation and write link timer if actually
necessary. This prevents losing the link in case of minor
changes.
Fixes: 7e53837269 ("net: ethernet: mediatek: Re-add support SGMII")
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reset the internal PCS state machine when changing interface mode.
This prevents confusing the state machine when changing interface
modes, e.g. from SGMII to 2500Base-X or vice-versa.
Fixes: 7e53837269 ("net: ethernet: mediatek: Re-add support SGMII")
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Packet length retrieved from skb data may be larger than
the actual socket buffer length (up to 9026 bytes). In such
case the cloned skb passed up the network stack will leak
kernel memory contents.
Fixes: d0cad87170 ("smsc75xx: SMSC LAN75xx USB gigabit ethernet adapter driver")
Signed-off-by: Szymon Heidrich <szymon.heidrich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wenjia Zhang says:
====================
net/smc: Fixes 2023-03-01
The 1st patch solves the problem that CLC message initialization was
not properly reversed in error handling path. And the 2nd one fixes
the possible deadlock triggered by cancel_delayed_work_sync().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
CLC message initialization was not properly reversed in error handling path.
Reported-and-suggested-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Spectrum ASICs have a configurable limit on how deep into the packet
they parse. By default, the limit is 96 bytes.
There are several cases where this parsing depth is not enough and there
is a need to increase it. For example, timestamping of PTP packets and a
FIB multipath hash policy that requires hashing on inner fields. The
driver therefore maintains a reference count that reflects the number of
consumers that require an increased parsing depth.
During reload_down() the parsing depth reference count does not
necessarily drop to zero, but the parsing depth itself is restored to
the default during reload_up() when the firmware is reset. It is
therefore possible to end up in situations where the driver thinks that
the parsing depth was increased (reference count is non-zero), when it
is not.
Fix by making sure that all the consumers that increase the parsing
depth reference count also decrease it during reload_down().
Specifically, make sure that when the routing code is de-initialized it
drops the reference count if it was increased because of a FIB multipath
hash policy that requires hashing on inner fields.
Add a warning if the reference count is not zero after the driver was
de-initialized and explicitly reset it to zero during initialization for
good measures.
Fixes: 2d91f0803b ("mlxsw: spectrum: Add infrastructure for parsing configuration")
Reported-by: Maksym Yaremchuk <maksymy@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/9c35e1b3e6c1d8f319a2449d14e2b86373f3b3ba.1678727526.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This bug influences both st_nci_i2c_remove and st_nci_spi_remove.
Take st_nci_i2c_remove as an example.
In st_nci_i2c_probe, it called ndlc_probe and bound &ndlc->sm_work
with llt_ndlc_sm_work.
When it calls ndlc_recv or timeout handler, it will finally call
schedule_work to start the work.
When we call st_nci_i2c_remove to remove the driver, there
may be a sequence as follows:
Fix it by finishing the work before cleanup in ndlc_remove
CPU0 CPU1
|llt_ndlc_sm_work
st_nci_i2c_remove |
ndlc_remove |
st_nci_remove |
nci_free_device|
kfree(ndev) |
//free ndlc->ndev |
|llt_ndlc_rcv_queue
|nci_recv_frame
|//use ndlc->ndev
Fixes: 35630df68d ("NFC: st21nfcb: Add driver for STMicroelectronics ST21NFCB NFC chip")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230312160837.2040857-1-zyytlz.wz@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test checks if (IPv4, IPv6) address pair properly conflict or not.
* IPv4
* 0.0.0.0
* 127.0.0.1
* IPv6
* ::
* ::1
If the IPv6 address is [::], the second bind() always fails.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paul Holzinger reported [0] that commit 5456262d2b ("net: Fix
incorrect address comparison when searching for a bind2 bucket")
introduced a bind() regression. Paul also gave a nice repro that
calls two types of bind() on the same port, both of which now
succeed, but the second call should fail:
bind(fd1, ::, port) + bind(fd2, 127.0.0.1, port)
The cited commit added address family tests in three functions to
fix the uninit-value KMSAN report. [1] However, the test added to
inet_bind2_bucket_match_addr_any() removed a necessary conflict
check; the dual-stack wildcard address no longer conflicts with
an IPv4 non-wildcard address.
If tb->family is AF_INET6 and sk->sk_family is AF_INET in
inet_bind2_bucket_match_addr_any(), we still need to check
if tb has the dual-stack wildcard address.
Note that the IPv4 wildcard address does not conflict with
IPv6 non-wildcard addresses.
[0]: https://lore.kernel.org/netdev/e21bf153-80b0-9ec0-15ba-e04a4ad42c34@redhat.com/
[1]: https://lore.kernel.org/netdev/CAG_fn=Ud3zSW7AZWXc+asfMhZVL5ETnvuY44Pmyv4NPv-ijN-A@mail.gmail.com/
Fixes: 5456262d2b ("net: Fix incorrect address comparison when searching for a bind2 bucket")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reported-by: Paul Holzinger <pholzing@redhat.com>
Link: https://lore.kernel.org/netdev/CAG_fn=Ud3zSW7AZWXc+asfMhZVL5ETnvuY44Pmyv4NPv-ijN-A@mail.gmail.com/
Reviewed-by: Eric Dumazet <edumazet@google.com>
Tested-by: Paul Holzinger <pholzing@redhat.com>
Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If genphy_read_status fails then further access to the PHY may result
in unpredictable behavior. To prevent this bail out immediately if
genphy_read_status fails.
Fixes: 4223dbffed ("net: phy: smsc: Re-enable EDPD mode for LAN87xx")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/026aa4f2-36f5-1c10-ab9f-cdb17dda6ac4@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RDMA is not supported in ice on a PF that has been added to a bonded
interface. To enforce this, when an interface enters a bond, we unplug
the auxiliary device that supports RDMA functionality. This unplug
currently happens in the context of handling the netdev bonding event.
This event is sent to the ice driver under RTNL context. This is causing
a deadlock where the RDMA driver is waiting for the RTNL lock to complete
the removal.
Defer the unplugging/re-plugging of the auxiliary device to the service
task so that it is not performed under the RTNL lock context.
Cc: stable@vger.kernel.org # 6.1.x
Reported-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Link: https://lore.kernel.org/netdev/CAK8fFZ6A_Gphw_3-QMGKEFQk=sfCw1Qmq0TVZK3rtAi7vb621A@mail.gmail.com/
Fixes: 5cb1ebdbc4 ("ice: Fix race condition during interface enslave")
Fixes: 4eace75e08 ("RDMA/irdma: Report the correct link speed")
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Arpana Arland <arpanax.arland@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230310194833.3074601-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use dh_listpackages to get a list of all binary packages.
With this, debian/control lists which binary packages will be produced.
Previously, ARCH=um listed linux-libc-dev in debian/control, but it
was not generated because each of mkdebian and builddeb independently
maintained the if-conditionals.
Another motivation is to allow scripts/package/builddeb to get the
package name (linux-image-*, etc.) dynamically from debian/control.
This will also allow the BuildProfile to control the generation of
the binary packages.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit 3ab18a625c ("kbuild: deb-pkg: improve the usability of source
package") set needless CROSS_COMPILE.
For example, 'make allnoconfig bindeb-pkg' on a x86_64 system will set
CROSS_COMPILE=i686-linux-gnu-, where the biarch compiler 'gcc' should
work for building the i386 kernel.
$ uname -m
x86_64
$ make allnoconfig bindeb-pkg >/dev/null
dpkg-architecture: warning: specified GNU system type i686-linux-gnu does not match CC system type x86_64-linux-gnu, try setting a correct CC environment variable
dpkg-source --before-build .
debian/rules binary
scripts/Kconfig.include:39: C compiler 'i686-linux-gnu-gcc' not found
make[6]: *** [scripts/kconfig/Makefile:77: olddefconfig] Error 1
make[5]: *** [Makefile:693: olddefconfig] Error 2
make[4]: *** [Makefile:358: __build_one_by_one] Error 2
make[3]: *** [debian/rules:7: build-arch] Error 2
dpkg-buildpackage: error: debian/rules binary subprocess returned exit status 2
make[2]: *** [scripts/Makefile.package:127: bindeb-pkg] Error 2
make[1]: *** [Makefile:1657: bindeb-pkg] Error 2
make: *** [Makefile:358: __build_one_by_one] Error 2
Check whether CROSS_COMPILE is defined, instead of whether it is non-empty.
If you invoke debian/rules via Kbuild, CROSS_COMPILE is always defined
in the top Makefile.
Fixes: 3ab18a625c ("kbuild: deb-pkg: improve the usability of source package")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
KERNELRELEASE does not need to match the package version in changelog.
Rather, it conventially matches what is called 'ABINAME', which is a
part of the binary package names.
Both are the same by default, but the former might be overridden by
KDEB_PKGVERSION. In this case, the resulting package would not boot
because /lib/modules/$(uname -r) does not point the module directory.
Partially revert 3ab18a625c ("kbuild: deb-pkg: improve the usability
of source package").
Reported-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Fixes: 3ab18a625c ("kbuild: deb-pkg: improve the usability of source package")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Since commit c5bf2efb05 ("kbuild: deb-pkg: fix binary-arch and clean
in debian/rules"), the source package generated by 'make deb-pkg' fails
to build.
I terribly missed the fact that the intdeb-pkg target may regenerate
include/config/kernel.release due to the following in the top Makefile:
%pkg: include/config/kernel.release FORCE
Restore KERNELRELEASE= option to avoid the kernel.release disagreement
between build-arch and binary-arch.
Fixes: c5bf2efb05 ("kbuild: deb-pkg: fix binary-arch and clean in debian/rules")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
