Commit Graph

57 Commits

Author SHA1 Message Date
Josef Bacik
ec8eb376e2 btrfs: move BTRFS_FS_STATE* definitions and helpers to fs.h
We're going to use fs.h to hold fs wide related helpers and definitions,
move the FS_STATE enum and related helpers to fs.h, and then update all
files that need these definitions to include fs.h.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-12-05 18:00:42 +01:00
Josef Bacik
9b569ea0be btrfs: move the printk helpers out of ctree.h
We have a bunch of printk helpers that are in ctree.h.  These have
nothing to do with ctree.c, so move them into their own header.
Subsequent patches will cleanup the printk helpers.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-12-05 18:00:41 +01:00
Josef Bacik
bd015294af btrfs: replace delete argument with EXTENT_CLEAR_ALL_BITS
Instead of taking up a whole argument to indicate we're clearing
everything in a range, simply add another EXTENT bit to control this,
and then update all the callers to drop this argument from the
clear_extent_bit variants.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-26 12:28:05 +02:00
Josef Bacik
570eb97bac btrfs: unify the lock/unlock extent variants
We have two variants of lock/unlock extent, one set that takes a cached
state, another that does not.  This is slightly annoying, and generally
speaking there are only a few places where we don't have a cached state.
Simplify this by making lock_extent/unlock_extent the only variant and
make it take a cached state, then convert all the callers appropriately.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-26 12:28:05 +02:00
Josef Bacik
dbbf49928f btrfs: remove the wake argument from clear_extent_bits
This is only used in the case that we are clearing EXTENT_LOCKED, so
infer this value from the bits passed in instead of taking it as an
argument.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-09-26 12:28:04 +02:00
David Sterba
c1867eb33e btrfs: clean up chained assignments
The chained assignments may be convenient to write, but make readability
a bit worse as it's too easy to overlook that there are several values
set on the same line while this is rather an exception.  Making it
consistent everywhere avoids surprises.

The pattern where inode times are initialized reuses the first value and
the order is mtime, ctime. In other blocks the assignments are expanded
so the order of variables is similar to the neighboring code.

Signed-off-by: David Sterba <dsterba@suse.com>
2022-07-25 17:45:39 +02:00
Filipe Manana
6fe81a3a3a btrfs: balance btree dirty pages and delayed items after clone and dedupe
When reflinking extents (clone and deduplication), we need to touch the
btree of the destination inode's subvolume, as well as potentially
create a delayed inode for the destination inode (if it was not created
before). However we are neither balancing the btree dirty pages nor the
delayed items after such operations, so if we have a task that is doing
a long series of clone or deduplication operations, it can result in
accumulation of too many btree dirty pages and delayed items.

So just call btrfs_btree_balance_dirty() after clone and deduplication,
just like we do for every other system call that results on modifying a
btree and adding delayed items.

Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-07-25 17:44:35 +02:00
David Sterba
21a8935ead btrfs: remove redundant calls to flush_dcache_page
Both memzero_page and memcpy_to_page already call flush_dcache_page so
we can remove the calls from btrfs code.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-07-25 17:44:34 +02:00
Filipe Manana
983d8209c6 btrfs: add missing inode updates on each iteration when replacing extents
When replacing file extents, called during fallocate, hole punching,
clone and deduplication, we may not be able to replace/drop all the
target file extent items with a single transaction handle. We may get
-ENOSPC while doing it, in which case we release the transaction handle,
balance the dirty pages of the btree inode, flush delayed items and get
a new transaction handle to operate on what's left of the target range.

By dropping and replacing file extent items we have effectively modified
the inode, so we should bump its iversion and update its mtime/ctime
before we update the inode item. This is because if the transaction
we used for partially modifying the inode gets committed by someone after
we release it and before we finish the rest of the range, a power failure
happens, then after mounting the filesystem our inode has an outdated
iversion and mtime/ctime, corresponding to the values it had before we
changed it.

So add the missing iversion and mtime/ctime updates.

Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-06-21 14:43:21 +02:00
Filipe Manana
d4597898ba btrfs: fix race between reflinking and ordered extent completion
While doing a reflink operation, if an ordered extent for a file range
that does not overlap with the source and destination ranges of the
reflink operation happens, we can end up having a failure in the reflink
operation and return -EINVAL to user space.

The following sequence of steps explains how this can happen:

1) We have the page at file offset 315392 dirty (under delalloc);

2) A reflink operation for this file starts, using the same file as both
   source and destination, the source range is [372736, 409600) (length of
   36864 bytes) and the destination range is [208896, 245760);

3) At btrfs_remap_file_range_prep(), we flush all delalloc in the source
   and destination ranges, and wait for any ordered extents in those range
   to complete;

4) Still at btrfs_remap_file_range_prep(), we then flush all delalloc in
   the inode, but we neither wait for it to complete nor any ordered
   extents to complete. This results in starting delalloc for the page at
   file offset 315392 and creating an ordered extent for that single page
   range;

5) We then move to btrfs_clone() and enter the loop to find file extent
   items to copy from the source range to destination range;

6) In the first iteration we end up at last file extent item stored in
   leaf A:

   (...)
   item 131 key (143616 108 315392) itemoff 5101 itemsize 53
            extent data disk bytenr 1903988736 nr 73728
            extent data offset 12288 nr 61440 ram 73728

   This represents the file range [315392, 376832), which overlaps with
   the source range to clone.

   @datal is set to 61440, key.offset is 315392 and @next_key_min_offset
   is therefore set to 376832 (315392 + 61440).

   @off (372736) is > key.offset (315392), so @new_key.offset is set to
   the value of @destoff (208896).

   @new_key.offset == @last_dest_end (208896) so @drop_start is set to
   208896 (@new_key.offset).

   @datal is adjusted to 4096, as @off is > @key.offset.

   So in this iteration we call btrfs_replace_file_extents() for the range
   [208896, 212991] (a single page, which is
   [@drop_start, @new_key.offset + @datal - 1]).

   @last_dest_end is set to 212992 (@new_key.offset + @datal =
   208896 + 4096 = 212992).

   Before the next iteration of the loop, @key.offset is set to the value
   376832, which is @next_key_min_offset;

7) On the second iteration btrfs_search_slot() leaves us again at leaf A,
   but this time pointing beyond the last slot of leaf A, as that's where
   a key with offset 376832 should be at if it existed. So end up calling
   btrfs_next_leaf();

8) btrfs_next_leaf() releases the path, but before it searches again the
   tree for the next key/leaf, the ordered extent for the single page
   range at file offset 315392 completes. That results in trimming the
   file extent item we processed before, adjusting its key offset from
   315392 to 319488, reducing its length from 61440 to 57344 and inserting
   a new file extent item for that single page range, with a key offset of
   315392 and a length of 4096.

   Leaf A now looks like:

     (...)
     item 132 key (143616 108 315392) itemoff 4995 itemsize 53
              extent data disk bytenr 1801666560 nr 4096
              extent data offset 0 nr 4096 ram 4096
     item 133 key (143616 108 319488) itemoff 4942 itemsize 53
              extent data disk bytenr 1903988736 nr 73728
              extent data offset 16384 nr 57344 ram 73728

9) When btrfs_next_leaf() returns, it gives us a path pointing to leaf A
   at slot 133, since it's the first key that follows what was the last
   key we saw (143616 108 315392). In fact it's the same item we processed
   before, but its key offset was changed, so it counts as a new key;

10) So now we have:

    @key.offset == 319488
    @datal == 57344

    @off (372736) is > key.offset (319488), so @new_key.offset is set to
    208896 (@destoff value).

    @new_key.offset (208896) != @last_dest_end (212992), so @drop_start
    is set to 212992 (@last_dest_end value).

    @datal is adjusted to 4096 because @off > @key.offset.

    So in this iteration we call btrfs_replace_file_extents() for the
    invalid range of [212992, 212991] (which is
    [@drop_start, @new_key.offset + @datal - 1]).

    This range is empty, the end offset is smaller than the start offset
    so btrfs_replace_file_extents() returns -EINVAL, which we end up
    returning to user space and fail the reflink operation.

    This all happens because the range of this file extent item was
    already processed in the previous iteration.

This scenario can be triggered very sporadically by fsx from fstests, for
example with test case generic/522.

So fix this by having btrfs_clone() skip file extent items that cover a
file range that we have already processed.

CC: stable@vger.kernel.org # 5.10+
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-06-21 14:43:13 +02:00
Filipe Manana
63c34cb4c6 btrfs: add and use helper to assert an inode range is clean
We have four different scenarios where we don't expect to find ordered
extents after locking a file range:

1) During plain fallocate;
2) During hole punching;
3) During zero range;
4) During reflinks (both cloning and deduplication).

This is because in all these cases we follow the pattern:

1) Lock the inode's VFS lock in exclusive mode;

2) Lock the inode's i_mmap_lock in exclusive node, to serialize with
   mmap writes;

3) Flush delalloc in a file range and wait for all ordered extents
   to complete - both done through btrfs_wait_ordered_range();

4) Lock the file range in the inode's io_tree.

So add a helper that asserts that we don't have ordered extents for a
given range. Make the four scenarios listed above use this helper after
locking the respective file range.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-16 17:03:09 +02:00
Filipe Manana
1c6cbbbeee btrfs: remove inode_dio_wait() calls when starting reflink operations
When starting a reflink operation we have these calls to inode_dio_wait()
which used to be needed because direct IO writes that don't cross the
i_size boundary did not take the inode's VFS lock, so we could race with
them and end up with ordered extents in target range after calling
btrfs_wait_ordered_range().

However that is not the case anymore, because the inode's VFS lock was
changed from a mutex to a rw semaphore, by commit 9902af79c0
("parallel lookups: actual switch to rwsem"), and several years later we
started to lock the inode's VFS lock in shared mode for direct IO writes
that don't cross the i_size boundary (commit e9adabb971 ("btrfs: use
shared lock for direct writes within EOF")).

So remove those inode_dio_wait() calls.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-05-16 17:03:09 +02:00
Matthew Wilcox (Oracle)
704528d895 fs: Remove ->readpages address space operation
All filesystems have now been converted to use ->readahead, so
remove the ->readpages operation and fix all the comments that
used to refer to it.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
2022-04-01 13:45:33 -04:00
Josef Bacik
ae460f058e btrfs: remove the cross file system checks from remap
The sb check is already done in do_clone_file_range, and the mnt check
(which will hopefully go away in a subsequent patch) is done in
ioctl_file_clone().  Remove the check in our code and put an ASSERT() to
make sure it doesn't change underneath us.

Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-03-14 13:13:52 +01:00
Filipe Manana
b2d9f2dc01 btrfs: deal with unexpected extent type during reflinking
Smatch complains about a possible dereference of a pointer that was not
initialized:

    CC [M]  fs/btrfs/reflink.o
    CHECK   fs/btrfs/reflink.c
  fs/btrfs/reflink.c:533 btrfs_clone() error: potentially dereferencing uninitialized 'trans'.

This is because we are not dealing with the case where the type of a file
extent has an unexpected value (not regular, not prealloc and not inline),
in which case the transaction handle pointer is not initialized.

Such unexpected type should be impossible, except in case of some memory
corruption caused either by bad hardware or some software bug causing
something like a buffer overrun.

So ASSERT that if the extent type is neither regular nor prealloc, then
it must be inline. Bail out with -EUCLEAN and a warning in case it is
not. This silences smatch.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-03-14 13:13:52 +01:00
Filipe Manana
1f4613cdbe btrfs: fix unexpected error path when reflinking an inline extent
When reflinking an inline extent, we assert that its file offset is 0 and
that its uncompressed length is not greater than the sector size. We then
return an error if one of those conditions is not satisfied. However we
use a return statement, which results in returning from btrfs_clone()
without freeing the path and buffer that were allocated before, as well as
not clearing the flag BTRFS_INODE_NO_DELALLOC_FLUSH for the destination
inode.

Fix that by jumping to the 'out' label instead, and also add a WARN_ON()
for each condition so that in case assertions are disabled, we get to
known which of the unexpected conditions triggered the error.

Fixes: a61e1e0df9 ("Btrfs: simplify inline extent handling when doing reflinks")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-03-14 13:13:52 +01:00
Filipe Manana
23e3337faf btrfs: reset last_reflink_trans after fsyncing inode
When an inode has a last_reflink_trans matching the current transaction,
we have to take special care when logging its checksums in order to
avoid getting checksum items with overlapping ranges in a log tree,
which could result in missing checksums after log replay (more on that
in the changelogs of commit 40e046acbd ("Btrfs: fix missing data
checksums after replaying a log tree") and commit e289f03ea7 ("btrfs:
fix corrupt log due to concurrent fsync of inodes with shared extents")).
We also need to make sure a full fsync will copy all old file extent
items it finds in modified leaves, because they might have been copied
from some other inode.

However once we fsync an inode, we don't need to keep paying the price of
that extra special care in future fsyncs done in the same transaction,
unless the inode is used for another reflink operation or the full sync
flag is set on it (truncate, failure to allocate extent maps for holes,
and other exceptional and infrequent cases).

So after we fsync an inode reset its last_unlink_trans to zero. In case
another reflink happens, we continue to update the last_reflink_trans of
the inode, just as before. Also set last_reflink_trans to the generation
of the last transaction that modified the inode whenever we need to set
the full sync flag on the inode, just like when we need to load an inode
from disk after eviction.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-03-14 13:13:52 +01:00
Filipe Manana
7f30c07288 btrfs: stop copying old file extents when doing a full fsync
When logging an inode in full sync mode, we go over every leaf that was
modified in the current transaction and has items associated to our inode,
and then copy all those items into the log tree. This includes copying
file extent items that were created and added to the inode in past
transactions, which is useless and only makes use more leaf space in the
log tree.

It's common to have a file with many file extent items spanning many
leaves where only a few file extent items are new and need to be logged,
and in such case we log all the file extent items we find in the modified
leaves.

So change the full sync behaviour to skip over file extent items that are
not needed. Those are the ones that match the following criteria:

1) Have a generation older than the current transaction and the inode
   was not a target of a reflink operation, as that can copy file extent
   items from a past generation from some other inode into our inode, so
   we have to log them;

2) Start at an offset within i_size - we must log anything at or beyond
   i_size, otherwise we would lose prealloc extents after log replay.

The following script exercises a scenario where this happens, and it's
somehow close enough to what happened often on a SQL Server workload which
I had to debug sometime ago to fix an issue where a pattern of writes to
prealloc extents and fsync resulted in fsync failing with -EIO (that was
commit ea7036de0d ("btrfs: fix fsync failure and transaction abort
after writes to prealloc extents")). In that particular case, we had large
files that had random writes and were often truncated, which made the
next fsync be a full sync.

  $ cat test.sh
  #!/bin/bash

  DEV=/dev/sdi
  MNT=/mnt/sdi

  MKFS_OPTIONS="-O no-holes -R free-space-tree"
  MOUNT_OPTIONS="-o ssd"

  FILE_SIZE=$((1 * 1024 * 1024 * 1024)) # 1G
  # FILE_SIZE=$((2 * 1024 * 1024 * 1024)) # 2G
  # FILE_SIZE=$((512 * 1024 * 1024)) # 512M

  mkfs.btrfs -f $MKFS_OPTIONS $DEV
  mount $MOUNT_OPTIONS $DEV $MNT

  # Create a file with many extents. Use direct IO to make it faster
  # to create the file - using buffered IO we would have to fsync
  # after each write (terribly slow).
  echo "Creating file with $((FILE_SIZE / 4096)) extents of 4K each..."
  xfs_io -f -d -c "pwrite -b 4K 0 $FILE_SIZE" $MNT/foobar

  # Commit the transaction, so every extent after this is from an
  # old generation.
  sync

  # Now rewrite only a few extents, which are all far spread apart from
  # each other (e.g. 1G / 32M = 32 extents).
  # After this only a few extents have a new generation, while all other
  # ones have an old generation.
  echo "Rewriting $((FILE_SIZE / (32 * 1024 * 1024))) extents..."
  for ((i = 0; i < $FILE_SIZE; i += $((32 * 1024 * 1024)))); do
      xfs_io -c "pwrite $i 4K" $MNT/foobar >/dev/null
  done

  # Fsync, the inode logged in full sync mode since it was never fsynced
  # before.
  echo "Fsyncing file..."
  xfs_io -c "fsync" $MNT/foobar

  umount $MNT

And the following bpftrace program was running when executing the test
script:

  $ cat bpf-script.sh
  #!/usr/bin/bpftrace

  k:btrfs_log_inode
  {
      @start_log_inode[tid] = nsecs;
  }

  kr:btrfs_log_inode
  /@start_log_inode[tid]/
  {
      @log_inode_dur[tid] = (nsecs - @start_log_inode[tid]) / 1000;
      delete(@start_log_inode[tid]);
  }

  k:btrfs_sync_log
  {
      @start_sync_log[tid] = nsecs;
  }

  kr:btrfs_sync_log
  /@start_sync_log[tid]/
  {
      $sync_log_dur = (nsecs - @start_sync_log[tid]) / 1000;
      printf("btrfs_log_inode() took %llu us\n", @log_inode_dur[tid]);
      printf("btrfs_sync_log()  took %llu us\n", $sync_log_dur);
      delete(@start_sync_log[tid]);
      delete(@log_inode_dur[tid]);
      exit();
  }

With 512M test file, before this patch:

  btrfs_log_inode() took 15218 us
  btrfs_sync_log()  took 1328 us

  Log tree has 17 leaves and 1 node, its total size is 294912 bytes.

With 512M test file, after this patch:

  btrfs_log_inode() took 14760 us
  btrfs_sync_log()  took 588 us

  Log tree has a single leaf, its total size is 16K.

With 1G test file, before this patch:

  btrfs_log_inode() took 27301 us
  btrfs_sync_log()  took 1767 us

  Log tree has 33 leaves and 1 node, its total size is 557056 bytes.

With 1G test file, after this patch:

  btrfs_log_inode() took 26166 us
  btrfs_sync_log()  took 593 us

  Log tree has a single leaf, its total size is 16K

With 2G test file, before this patch:

  btrfs_log_inode() took 50892 us
  btrfs_sync_log()  took 3127 us

  Log tree has 65 leaves and 1 node, its total size is 1081344 bytes.

With 2G test file, after this patch:

  btrfs_log_inode() took 50126 us
  btrfs_sync_log()  took 586 us

  Log tree has a single leaf, its total size is 16K.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-03-14 13:13:52 +01:00
Josef Bacik
3212fa14e7 btrfs: drop the _nr from the item helpers
Now that all call sites are using the slot number to modify item values,
rename the SETGET helpers to raw_item_*(), and then rework the _nr()
helpers to be the btrfs_item_*() btrfs_set_item_*() helpers, and then
rename all of the callers to the new helpers.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2022-01-03 15:09:43 +01:00
Qu Wenruo
e4f9434749 btrfs: subpage: add bitmap for PageChecked flag
Although in btrfs we have very limited usage of PageChecked flag, it's
still some page flag not yet subpage compatible.

Fix it by introducing btrfs_subpage::checked_offset to do the convert.

For most call sites, especially for free-space cache, COW fixup and
btrfs_invalidatepage(), they all work in full page mode anyway.

For other call sites, they work as subpage compatible mode.

Some call sites need extra modification:

- btrfs_drop_pages()
  Needs extra parameter to get the real range we need to clear checked
  flag.

  Also since btrfs_drop_pages() will accept pages beyond the dirtied
  range, update btrfs_subpage_clamp_range() to handle such case
  by setting @len to 0 if the page is beyond target range.

- btrfs_invalidatepage()
  We need to call subpage helper before calling __btrfs_releasepage(),
  or it will trigger ASSERT() as page->private will be cleared.

- btrfs_verify_data_csum()
  In theory we don't need the io_bio->csum check anymore, but it's
  won't hurt.  Just change the comment.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-10-26 19:08:03 +02:00
Sidong Yang
44bee215f7 btrfs: reflink: initialize return value to 0 in btrfs_extent_same()
Fix a warning reported by smatch that ret could be returned without
initialized.  The dedupe operations are supposed to to return 0 for a 0
length range but the caller does not pass olen == 0. To keep this
behaviour and also fix the warning initialize ret to 0.

Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Sidong Yang <realwakka@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-10-26 19:03:57 +02:00
Qu Wenruo
3115deb381 btrfs: reflink: make copy_inline_to_page() to be subpage compatible
The modifications are:

- Page copy destination
  For subpage case, one page can contain multiple sectors, thus we can
  no longer expect the memcpy_to_page()/btrfs_decompress() to copy
  data into page offset 0.
  The correct offset is offset_in_page(file_offset) now, which should
  handle both regular sectorsize and subpage cases well.

- Page status update
  Now we need to use subpage helper to handle the page status update.

Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-06-21 15:19:10 +02:00
Linus Torvalds
fd2ff2774e for-5.13-rc4-tag
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAmC435cACgkQxWXV+ddt
 WDuh5w/+IGfsUFfKikJZpZUP7q/2gC0t0dzZemxeZMutJbT/KCZCDd4CjLf6YH6r
 oV9uYIgOWGd3aem9fe0R60ErJ4htgszIgeydCw3s2EuTms6WvAVA6Wp+wK/3UNx3
 vQgYsqYkhMzIYKm/D4q8G+bqA2nPbBTDRNsXDIDrZYONxwSb+dNbQCGVknBRzRPa
 hiCqYhUSyXA7E6UZdlma7MvpDOquZN+iW3RRVx1AULLqVs01PCnG/CEN+0oQm2JE
 r9IyRxOZUvSeW6opT80yzZFCoboNSduMjPENTfzLY6Q1xzS/EtP4kM86fB/7AoJv
 UI0c3Sr84SC9vOsBsbGJaBHpxP3OpzxohKU///jVQgEDpGv4STPlkVfxk23BHcux
 Fdfg7wodkXeLU1Ff4dlJhvCqNYqc5V8lT5Kl52ai9Scct6D4yZBAq4KJp2LmYFC0
 cHv6xFxBUv5zFZP1j6NMOmiLlCdDEkOruku2mMweQOBWYW/lHYNU469V5RCvfbLl
 HlbDrtZdnQ3m2IhpQrXiTnT47Ib4DPYWkhRVfWbyVJHA+CbcOV62RQfl+r95Bc7j
 FB1gM5vwUTJV7wgzErrq7+BD8quxG6/NuLDFjHYRcIj1kSIMK4/I1fOWruzuK+CL
 6n7LLvBOojYfFo+ruQMSp2imDn3JJucBuh0/ssOlUWl2zsy6lDA=
 =8066
 -----END PGP SIGNATURE-----

Merge tag 'for-5.13-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:
 "Error handling improvements, caught by error injection:

   - handle errors during checksum deletion

   - set error on mapping when ordered extent io cannot be finished

   - inode link count fixup in tree-log

   - missing return value checks for inode updates in tree-log

   - abort transaction in rename exchange if adding second reference
     fails

  Fixes:

   - fix fsync failure after writes to prealloc extents

   - fix deadlock when cloning inline extents and low on available space

   - fix compressed writes that cross stripe boundary"

* tag 'for-5.13-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  MAINTAINERS: add btrfs IRC link
  btrfs: fix deadlock when cloning inline extents and low on available space
  btrfs: fix fsync failure and transaction abort after writes to prealloc extents
  btrfs: abort in rename_exchange if we fail to insert the second ref
  btrfs: check error value from btrfs_update_inode in tree log
  btrfs: fixup error handling in fixup_inode_link_counts
  btrfs: mark ordered extent and inode with error if we fail to finish
  btrfs: return errors from btrfs_del_csums in cleanup_ref_head
  btrfs: fix error handling in btrfs_del_csums
  btrfs: fix compressed writes that cross stripe boundary
2021-06-03 11:37:14 -07:00
Filipe Manana
76a6d5cd74 btrfs: fix deadlock when cloning inline extents and low on available space
There are a few cases where cloning an inline extent requires copying data
into a page of the destination inode. For these cases we are allocating
the required data and metadata space while holding a leaf locked. This can
result in a deadlock when we are low on available space because allocating
the space may flush delalloc and two deadlock scenarios can happen:

1) When starting writeback for an inode with a very small dirty range that
   fits in an inline extent, we deadlock during the writeback when trying
   to insert the inline extent, at cow_file_range_inline(), if the extent
   is going to be located in the leaf for which we are already holding a
   read lock;

2) After successfully starting writeback, for non-inline extent cases,
   the async reclaim thread will hang waiting for an ordered extent to
   complete if the ordered extent completion needs to modify the leaf
   for which the clone task is holding a read lock (for adding or
   replacing file extent items). So the cloning task will wait forever
   on the async reclaim thread to make progress, which in turn is
   waiting for the ordered extent completion which in turn is waiting
   to acquire a write lock on the same leaf.

So fix this by making sure we release the path (and therefore the leaf)
every time we need to copy the inline extent's data into a page of the
destination inode, as by that time we do not need to have the leaf locked.

Fixes: 05a5a7621c ("Btrfs: implement full reflink support for inline extents")
CC: stable@vger.kernel.org # 5.10+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-05-27 23:31:52 +02:00
Linus Torvalds
45af60e7ce for-5.13-rc2-tag
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAmCoEQkACgkQxWXV+ddt
 WDsn6Q//XXQVextL6g6Wjx0SR9b5C1ndSV841jNY+KQ0drBPSOBs+0SXI+nIWAK1
 iTpmj3s2qrRElZZ6DT4fKP28KnbUJed9+CcirNnN3IMOeauI760CLobXZLsw1wGH
 o0HKKgcPhw/v9o9jqX22rSfzDZ2Rx2KhZ8iEb1ZXIG5iJNFcnXCCoFOqk4I+UEvH
 /5734KU8RI3sCRhziSf/vDCF50p+BIWr8VilQkmZUzi0oa6Y1wXm0qd9j0unhICR
 NxcBk1NYdOosAvVRhSqync1BNLhXSctg4rwhLlSI5SDvt/Ivz5tguNr9HcizOvmW
 zyb0g1c3Pq0p2wQJLybbs1zn67d0+7Q23UPWx1C+IKU3nmX5mGWzToxjVOQASYaZ
 8UbzYAjUHtJpLDB4dp6+k5Pv/yfVGyhxXI+qLMWow77qRPPf7/vw5nEwTXmjcPRH
 9st0TopZVXI4IEpZP+HeNFdNONuPL3CqV0t1+MnC73WMhmUfXR5E8Yq5H3MscuFl
 smkrWUq/g+cmkiOw5r4MyadFuN1MsXGw4rOdbYjY4JqVht6gPkOp3P73Hme5rD3H
 Txw/1WKEl+w3I6wS0Dl/NFcMGOyl8gEv4rATDyRWkxfmCue2mcTGS/3jjjWWguu4
 +Q7e6p1390PLAvMV/rEDoYmFCoPSYp6trvupW+5fkZdOyei1SZM=
 =98LW
 -----END PGP SIGNATURE-----

Merge tag 'for-5.13-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:
 "A few more fixes:

   - fix unaligned compressed writes in zoned mode

   - fix false positive lockdep warning when cloning inline extent

   - remove wrong BUG_ON in tree-log error handling"

* tag 'for-5.13-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: zoned: fix parallel compressed writes
  btrfs: zoned: pass start block to btrfs_use_zone_append
  btrfs: do not BUG_ON in link_to_fixup_dir
  btrfs: release path before starting transaction when cloning inline extent
2021-05-21 13:24:12 -10:00
Filipe Manana
6416954ca7 btrfs: release path before starting transaction when cloning inline extent
When cloning an inline extent there are a few cases, such as when we have
an implicit hole at file offset 0, where we start a transaction while
holding a read lock on a leaf. Starting the transaction results in a call
to sb_start_intwrite(), which results in doing a read lock on a percpu
semaphore. Lockdep doesn't like this and complains about it:

  [46.580704] ======================================================
  [46.580752] WARNING: possible circular locking dependency detected
  [46.580799] 5.13.0-rc1 #28 Not tainted
  [46.580832] ------------------------------------------------------
  [46.580877] cloner/3835 is trying to acquire lock:
  [46.580918] c00000001301d638 (sb_internal#2){.+.+}-{0:0}, at: clone_copy_inline_extent+0xe4/0x5a0
  [46.581167]
  [46.581167] but task is already holding lock:
  [46.581217] c000000007fa2550 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x70/0x1d0
  [46.581293]
  [46.581293] which lock already depends on the new lock.
  [46.581293]
  [46.581351]
  [46.581351] the existing dependency chain (in reverse order) is:
  [46.581410]
  [46.581410] -> #1 (btrfs-tree-00){++++}-{3:3}:
  [46.581464]        down_read_nested+0x68/0x200
  [46.581536]        __btrfs_tree_read_lock+0x70/0x1d0
  [46.581577]        btrfs_read_lock_root_node+0x88/0x200
  [46.581623]        btrfs_search_slot+0x298/0xb70
  [46.581665]        btrfs_set_inode_index+0xfc/0x260
  [46.581708]        btrfs_new_inode+0x26c/0x950
  [46.581749]        btrfs_create+0xf4/0x2b0
  [46.581782]        lookup_open.isra.57+0x55c/0x6a0
  [46.581855]        path_openat+0x418/0xd20
  [46.581888]        do_filp_open+0x9c/0x130
  [46.581920]        do_sys_openat2+0x2ec/0x430
  [46.581961]        do_sys_open+0x90/0xc0
  [46.581993]        system_call_exception+0x3d4/0x410
  [46.582037]        system_call_common+0xec/0x278
  [46.582078]
  [46.582078] -> #0 (sb_internal#2){.+.+}-{0:0}:
  [46.582135]        __lock_acquire+0x1e90/0x2c50
  [46.582176]        lock_acquire+0x2b4/0x5b0
  [46.582263]        start_transaction+0x3cc/0x950
  [46.582308]        clone_copy_inline_extent+0xe4/0x5a0
  [46.582353]        btrfs_clone+0x5fc/0x880
  [46.582388]        btrfs_clone_files+0xd8/0x1c0
  [46.582434]        btrfs_remap_file_range+0x3d8/0x590
  [46.582481]        do_clone_file_range+0x10c/0x270
  [46.582558]        vfs_clone_file_range+0x1b0/0x310
  [46.582605]        ioctl_file_clone+0x90/0x130
  [46.582651]        do_vfs_ioctl+0x874/0x1ac0
  [46.582697]        sys_ioctl+0x6c/0x120
  [46.582733]        system_call_exception+0x3d4/0x410
  [46.582777]        system_call_common+0xec/0x278
  [46.582822]
  [46.582822] other info that might help us debug this:
  [46.582822]
  [46.582888]  Possible unsafe locking scenario:
  [46.582888]
  [46.582942]        CPU0                    CPU1
  [46.582984]        ----                    ----
  [46.583028]   lock(btrfs-tree-00);
  [46.583062]                                lock(sb_internal#2);
  [46.583119]                                lock(btrfs-tree-00);
  [46.583174]   lock(sb_internal#2);
  [46.583212]
  [46.583212]  *** DEADLOCK ***
  [46.583212]
  [46.583266] 6 locks held by cloner/3835:
  [46.583299]  #0: c00000001301d448 (sb_writers#12){.+.+}-{0:0}, at: ioctl_file_clone+0x90/0x130
  [46.583382]  #1: c00000000f6d3768 (&sb->s_type->i_mutex_key#15){+.+.}-{3:3}, at: lock_two_nondirectories+0x58/0xc0
  [46.583477]  #2: c00000000f6d72a8 (&sb->s_type->i_mutex_key#15/4){+.+.}-{3:3}, at: lock_two_nondirectories+0x9c/0xc0
  [46.583574]  #3: c00000000f6d7138 (&ei->i_mmap_lock){+.+.}-{3:3}, at: btrfs_remap_file_range+0xd0/0x590
  [46.583657]  #4: c00000000f6d35f8 (&ei->i_mmap_lock/1){+.+.}-{3:3}, at: btrfs_remap_file_range+0xe0/0x590
  [46.583743]  #5: c000000007fa2550 (btrfs-tree-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x70/0x1d0
  [46.583828]
  [46.583828] stack backtrace:
  [46.583872] CPU: 1 PID: 3835 Comm: cloner Not tainted 5.13.0-rc1 #28
  [46.583931] Call Trace:
  [46.583955] [c0000000167c7200] [c000000000c1ee78] dump_stack+0xec/0x144 (unreliable)
  [46.584052] [c0000000167c7240] [c000000000274058] print_circular_bug.isra.32+0x3a8/0x400
  [46.584123] [c0000000167c72e0] [c0000000002741f4] check_noncircular+0x144/0x190
  [46.584191] [c0000000167c73b0] [c000000000278fc0] __lock_acquire+0x1e90/0x2c50
  [46.584259] [c0000000167c74f0] [c00000000027aa94] lock_acquire+0x2b4/0x5b0
  [46.584317] [c0000000167c75e0] [c000000000a0d6cc] start_transaction+0x3cc/0x950
  [46.584388] [c0000000167c7690] [c000000000af47a4] clone_copy_inline_extent+0xe4/0x5a0
  [46.584457] [c0000000167c77c0] [c000000000af525c] btrfs_clone+0x5fc/0x880
  [46.584514] [c0000000167c7990] [c000000000af5698] btrfs_clone_files+0xd8/0x1c0
  [46.584583] [c0000000167c7a00] [c000000000af5b58] btrfs_remap_file_range+0x3d8/0x590
  [46.584652] [c0000000167c7ae0] [c0000000005d81dc] do_clone_file_range+0x10c/0x270
  [46.584722] [c0000000167c7b40] [c0000000005d84f0] vfs_clone_file_range+0x1b0/0x310
  [46.584793] [c0000000167c7bb0] [c00000000058bf80] ioctl_file_clone+0x90/0x130
  [46.584861] [c0000000167c7c10] [c00000000058c894] do_vfs_ioctl+0x874/0x1ac0
  [46.584922] [c0000000167c7d10] [c00000000058db4c] sys_ioctl+0x6c/0x120
  [46.584978] [c0000000167c7d60] [c0000000000364a4] system_call_exception+0x3d4/0x410
  [46.585046] [c0000000167c7e10] [c00000000000d45c] system_call_common+0xec/0x278
  [46.585114] --- interrupt: c00 at 0x7ffff7e22990
  [46.585160] NIP:  00007ffff7e22990 LR: 00000001000010ec CTR: 0000000000000000
  [46.585224] REGS: c0000000167c7e80 TRAP: 0c00   Not tainted  (5.13.0-rc1)
  [46.585280] MSR:  800000000280f033 <SF,VEC,VSX,EE,PR,FP,ME,IR,DR,RI,LE>  CR: 28000244  XER: 00000000
  [46.585374] IRQMASK: 0
  [46.585374] GPR00: 0000000000000036 00007fffffffdec0 00007ffff7f17100 0000000000000004
  [46.585374] GPR04: 000000008020940d 00007fffffffdf40 0000000000000000 0000000000000000
  [46.585374] GPR08: 0000000000000004 0000000000000000 0000000000000000 0000000000000000
  [46.585374] GPR12: 0000000000000000 00007ffff7ffa940 0000000000000000 0000000000000000
  [46.585374] GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  [46.585374] GPR20: 0000000000000000 000000009123683e 00007fffffffdf40 0000000000000000
  [46.585374] GPR24: 0000000000000000 0000000000000000 0000000000000000 0000000000000004
  [46.585374] GPR28: 0000000100030260 0000000100030280 0000000000000003 000000000000005f
  [46.585919] NIP [00007ffff7e22990] 0x7ffff7e22990
  [46.585964] LR [00000001000010ec] 0x1000010ec
  [46.586010] --- interrupt: c00

This should be a false positive, as both locks are acquired in read mode.
Nevertheless, we don't need to hold a leaf locked when we start the
transaction, so just release the leaf (path) before starting it.

Reported-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/linux-btrfs/20210513214404.xks77p566fglzgum@riteshh-domain/
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-05-17 15:49:19 +02:00
Ira Weiny
d048b9c2a7 btrfs: use memzero_page() instead of open coded kmap pattern
There are many places where kmap/memset/kunmap patterns occur.

Use the newly lifted memzero_page() to eliminate direct uses of kmap and
leverage the new core functions use of kmap_local_page().

The development of this patch was aided by the following coccinelle
script:

// <smpl>
// SPDX-License-Identifier: GPL-2.0-only
// Find kmap/memset/kunmap pattern and replace with memset*page calls
//
// NOTE: Offsets and other expressions may be more complex than what the script
// will automatically generate.  Therefore a catchall rule is provided to find
// the pattern which then must be evaluated by hand.
//
// Confidence: Low
// Copyright: (C) 2021 Intel Corporation
// URL: http://coccinelle.lip6.fr/
// Comments:
// Options:

//
// Then the memset pattern
//
@ memset_rule1 @
expression page, V, L, Off;
identifier ptr;
type VP;
@@

(
-VP ptr = kmap(page);
|
-ptr = kmap(page);
|
-VP ptr = kmap_atomic(page);
|
-ptr = kmap_atomic(page);
)
<+...
(
-memset(ptr, 0, L);
+memzero_page(page, 0, L);
|
-memset(ptr + Off, 0, L);
+memzero_page(page, Off, L);
|
-memset(ptr, V, L);
+memset_page(page, V, 0, L);
|
-memset(ptr + Off, V, L);
+memset_page(page, V, Off, L);
)
...+>
(
-kunmap(page);
|
-kunmap_atomic(ptr);
)

// Remove any pointers left unused
@
depends on memset_rule1
@
identifier memset_rule1.ptr;
type VP, VP1;
@@

-VP ptr;
	... when != ptr;
? VP1 ptr;

//
// Catch all
//
@ memset_rule2 @
expression page;
identifier ptr;
expression GenTo, GenSize, GenValue;
type VP;
@@

(
-VP ptr = kmap(page);
|
-ptr = kmap(page);
|
-VP ptr = kmap_atomic(page);
|
-ptr = kmap_atomic(page);
)
<+...
(
//
// Some call sites have complex expressions within the memset/memcpy
// The follow are catch alls which need to be evaluated by hand.
//
-memset(GenTo, 0, GenSize);
+memzero_pageExtra(page, GenTo, GenSize);
|
-memset(GenTo, GenValue, GenSize);
+memset_pageExtra(page, GenValue, GenTo, GenSize);
)
...+>
(
-kunmap(page);
|
-kunmap_atomic(ptr);
)

// Remove any pointers left unused
@
depends on memset_rule2
@
identifier memset_rule2.ptr;
type VP, VP1;
@@

-VP ptr;
	... when != ptr;
? VP1 ptr;

// </smpl>

Link: https://lkml.kernel.org/r/20210309212137.2610186-4-ira.weiny@intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 11:27:27 -07:00
Filipe Manana
b7a7a83463 btrfs: make reflinks respect O_SYNC O_DSYNC and S_SYNC flags
If we reflink to or from a file opened with O_SYNC/O_DSYNC or to/from a
file that has the S_SYNC attribute set, we totally ignore that and do not
durably persist the reflink changes. Since a reflink can change the data
readable from a file (and mtime/ctime, or a file size), it makes sense to
durably persist (fsync) the source and destination files/ranges.

This was previously discussed at:

https://lore.kernel.org/linux-btrfs/20200903035225.GJ6090@magnolia/

The recently introduced test case generic/628, from fstests, exercises
these scenarios and currently fails without this change.

So make sure we fsync the source and destination files/ranges when either
of them was opened with O_SYNC/O_DSYNC or has the S_SYNC attribute set,
just like XFS already does.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-04-19 17:25:17 +02:00
Josef Bacik
8c99516a8c btrfs: exclude mmaps while doing remap
Darrick reported a potential issue to me where we could allow mmap
writes after validating a page range matched in the case of dedupe.
Generally we rely on lock page -> lock extent with the ordered flush to
protect us, but this is done after we check the pages because we use the
generic helpers, so we could modify the page in between doing the check
and locking the range.

There also exists a deadlock, as described by Filipe

"""
When cloning a file range, we lock the inodes, flush any delalloc within
the respective file ranges, wait for any ordered extents and then lock the
file ranges in both inodes. This means that right after we flush delalloc
and before we lock the file ranges, memory mapped writes can come in and
dirty pages in the file ranges of the clone operation.

Most of the time this is harmless and causes no problems. However, if we
are low on available metadata space, we can later end up in a deadlock
when starting a transaction to replace file extent items. This happens if
when allocating metadata space for the transaction, we need to wait for
the async reclaim thread to release space and the reclaim thread needs to
flush delalloc for the inode that got the memory mapped write and has its
range locked by the clone task.

Basically what happens is the following:

1) A clone operation locks inodes A and B, flushes delalloc for both
   inodes in the respective file ranges and waits for any ordered extents
   in those ranges to complete;

2) Before the clone task locks the file ranges, another task does a
   memory mapped write (which does not lock the inode) for one of the
   inodes of the clone operation. So now we have a dirty page in one of
   the ranges used by the clone operation;

3) The clone operation locks the file ranges for inodes A and B;

4) Later, when iterating over the file extents of inode A, the clone
   task attempts to start a transaction. There's not enough available
   free metadata space, so the async reclaim task is started (if not
   running already) and we wait for someone to wake us up on our
   reservation ticket;

5) The async reclaim task is not able to release space by any other
   means and decides to flush delalloc for the inode of the clone
   operation;

6) The workqueue job used to flush the inode blocks when starting
   delalloc for the inode, since the file range is currently locked by
   the clone task;

7) But the clone task is waiting on its reservation ticket and the async
   reclaim task is waiting on the flush job to complete, which can't
   progress since the clone task has the file range locked. So unless
   some other task is able to release space, for example an ordered
   extent for some other inode completes, we have a deadlock between all
   these tasks;

When this happens stack traces like the following show up in dmesg/syslog:

 INFO: task kworker/u16:11:1810830 blocked for more than 120 seconds.
       Tainted: G    B   W         5.10.0-rc4-btrfs-next-73 #1
 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
 task:kworker/u16:11  state:D stack:    0 pid:1810830 ppid:     2 flags:0x00004000
 Workqueue: btrfs-flush_delalloc btrfs_work_helper [btrfs]
 Call Trace:
  __schedule+0x5d1/0xcf0
  schedule+0x45/0xe0
  lock_extent_bits+0x1e6/0x2d0 [btrfs]
  ? finish_wait+0x90/0x90
  btrfs_invalidatepage+0x32c/0x390 [btrfs]
  ? __mod_memcg_state+0x8e/0x160
  __extent_writepage+0x2d4/0x400 [btrfs]
  extent_write_cache_pages+0x2b2/0x500 [btrfs]
  ? lock_release+0x20e/0x4c0
  ? trace_hardirqs_on+0x1b/0xf0
  extent_writepages+0x43/0x90 [btrfs]
  ? lock_acquire+0x1a3/0x490
  do_writepages+0x43/0xe0
  ? __filemap_fdatawrite_range+0xa4/0x100
  __filemap_fdatawrite_range+0xc5/0x100
  btrfs_run_delalloc_work+0x17/0x40 [btrfs]
  btrfs_work_helper+0xf1/0x600 [btrfs]
  process_one_work+0x24e/0x5e0
  worker_thread+0x50/0x3b0
  ? process_one_work+0x5e0/0x5e0
  kthread+0x153/0x170
  ? kthread_mod_delayed_work+0xc0/0xc0
  ret_from_fork+0x22/0x30
 INFO: task kworker/u16:1:2426217 blocked for more than 120 seconds.
       Tainted: G    B   W         5.10.0-rc4-btrfs-next-73 #1
 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
 task:kworker/u16:1   state:D stack:    0 pid:2426217 ppid:     2 flags:0x00004000
 Workqueue: events_unbound btrfs_async_reclaim_metadata_space [btrfs]
 Call Trace:
  __schedule+0x5d1/0xcf0
  ? kvm_clock_read+0x14/0x30
  ? wait_for_completion+0x81/0x110
  schedule+0x45/0xe0
  schedule_timeout+0x30c/0x580
  ? _raw_spin_unlock_irqrestore+0x3c/0x60
  ? lock_acquire+0x1a3/0x490
  ? try_to_wake_up+0x7a/0xa20
  ? lock_release+0x20e/0x4c0
  ? lock_acquired+0x199/0x490
  ? wait_for_completion+0x81/0x110
  wait_for_completion+0xab/0x110
  start_delalloc_inodes+0x2af/0x390 [btrfs]
  btrfs_start_delalloc_roots+0x12d/0x250 [btrfs]
  flush_space+0x24f/0x660 [btrfs]
  btrfs_async_reclaim_metadata_space+0x1bb/0x480 [btrfs]
  process_one_work+0x24e/0x5e0
  worker_thread+0x20f/0x3b0
  ? process_one_work+0x5e0/0x5e0
  kthread+0x153/0x170
  ? kthread_mod_delayed_work+0xc0/0xc0
  ret_from_fork+0x22/0x30
(...)
several other tasks blocked on inode locks held by the clone task below
(...)
 RIP: 0033:0x7f61efe73fff
 Code: Unable to access opcode bytes at RIP 0x7f61efe73fd5.
 RSP: 002b:00007ffc3371bbe8 EFLAGS: 00000202 ORIG_RAX: 000000000000013c
 RAX: ffffffffffffffda RBX: 00007ffc3371bea0 RCX: 00007f61efe73fff
 RDX: 00000000ffffff9c RSI: 0000560fbd604690 RDI: 00000000ffffff9c
 RBP: 00007ffc3371beb0 R08: 0000000000000002 R09: 0000560fbd5d75f0
 R10: 0000560fbd5d81f0 R11: 0000000000000202 R12: 0000000000000002
 R13: 000000000000000b R14: 00007ffc3371bea0 R15: 00007ffc3371beb0
 task: fdm-stress        state:D stack:    0 pid:2508234 ppid:2508153 flags:0x00004000
 Call Trace:
  __schedule+0x5d1/0xcf0
  ? _raw_spin_unlock_irqrestore+0x3c/0x60
  schedule+0x45/0xe0
  __reserve_bytes+0x4a4/0xb10 [btrfs]
  ? finish_wait+0x90/0x90
  btrfs_reserve_metadata_bytes+0x29/0x190 [btrfs]
  btrfs_block_rsv_add+0x1f/0x50 [btrfs]
  start_transaction+0x2d1/0x760 [btrfs]
  btrfs_replace_file_extents+0x120/0x930 [btrfs]
  ? lock_release+0x20e/0x4c0
  btrfs_clone+0x3e4/0x7e0 [btrfs]
  ? btrfs_lookup_first_ordered_extent+0x8e/0x100 [btrfs]
  btrfs_clone_files+0xf6/0x150 [btrfs]
  btrfs_remap_file_range+0x324/0x3d0 [btrfs]
  do_clone_file_range+0xd4/0x1f0
  vfs_clone_file_range+0x4d/0x230
  ? lock_release+0x20e/0x4c0
  ioctl_file_clone+0x8f/0xc0
  do_vfs_ioctl+0x342/0x750
  __x64_sys_ioctl+0x62/0xb0
  do_syscall_64+0x33/0x80
  entry_SYSCALL_64_after_hwframe+0x44/0xa9
"""

Fix both of these issues by excluding mmaps from happening we are doing
any sort of remap, which prevents this race completely.

Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-04-19 17:25:15 +02:00
Josef Bacik
64708539cd btrfs: use btrfs_inode_lock/btrfs_inode_unlock inode lock helpers
A few places we intermix btrfs_inode_lock with a inode_unlock, and some
places we just use inode_lock/inode_unlock instead of btrfs_inode_lock.

None of these places are using this incorrectly, but as we adjust some
of these callers it would be nice to keep everything consistent, so
convert everybody to use btrfs_inode_lock/btrfs_inode_unlock.

Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-04-19 17:25:15 +02:00
Nikolay Borisov
bfc78479eb btrfs: make btrfs_replace_file_extents take btrfs_inode
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-04-19 17:25:14 +02:00
Linus Torvalds
7a7fd0de4a Merge branch 'kmap-conversion-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull kmap conversion updates from David Sterba:
 "This contains changes regarding kmap API use and eg conversion from
  kmap_atomic to kmap_local_page.

  The API belongs to memory management but to save cross-tree
  dependency headaches we've agreed to take it through the btrfs tree
  because there are some trivial conversions possible, while the rest
  will need some time and getting the easy cases out of the way would be
  convenient.

  The changes can be grouped:

   - function exports, new helpers

   - new VM_BUG_ON for additional verification; it's been discussed if
     it should be VM_BUG_ON or BUG_ON, the former was chosen due to
     performance reasons

   - code replaced by relevant helpers"

[ This is an updated version of a request that originally came in during
  the merge window, but I asked for some updates:

    https://lore.kernel.org/lkml/cover.1614090658.git.dsterba@suse.com/

  which is why this got merge after the merge window closed.  - Linus ]

* 'kmap-conversion-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: use copy_highpage() instead of 2 kmaps()
  btrfs: use memcpy_[to|from]_page() and kmap_local_page()
  mm/highmem: Add VM_BUG_ON() to mem*_page() calls
  mm/highmem: Introduce memcpy_page(), memmove_page(), and memset_page()
  mm/highmem: Convert memcpy_[to|from]_page() to kmap_local_page()
  mm/highmem: Lift memcpy_[to|from]_page to core
2021-03-01 11:24:18 -08:00
Ira Weiny
3590ec5899 btrfs: use memcpy_[to|from]_page() and kmap_local_page()
There are many places where the pattern kmap/memcpy/kunmap occurs.

This pattern was lifted to the core common functions
memcpy_[to|from]_page().

Use these new functions to reduce the code, eliminate direct uses of
kmap, and leverage the new core functions use of kmap_local_page().

Also, there is 1 place where a kmap/memcpy is followed by an
optional memset.  Here we leave the kmap open coded to avoid remapping
the page but use kmap_local_page() directly.

Development of this patch was aided by the coccinelle script:

// <smpl>
// SPDX-License-Identifier: GPL-2.0-only
// Find kmap/memcpy/kunmap pattern and replace with memcpy*page calls
//
// NOTE: Offsets and other expressions may be more complex than what the script
// will automatically generate.  Therefore a catchall rule is provided to find
// the pattern which then must be evaluated by hand.
//
// Confidence: Low
// Copyright: (C) 2021 Intel Corporation
// URL: http://coccinelle.lip6.fr/
// Comments:
// Options:

//
// simple memcpy version
//
@ memcpy_rule1 @
expression page, T, F, B, Off;
identifier ptr;
type VP;
@@

(
-VP ptr = kmap(page);
|
-ptr = kmap(page);
|
-VP ptr = kmap_atomic(page);
|
-ptr = kmap_atomic(page);
)
<+...
(
-memcpy(ptr + Off, F, B);
+memcpy_to_page(page, Off, F, B);
|
-memcpy(ptr, F, B);
+memcpy_to_page(page, 0, F, B);
|
-memcpy(T, ptr + Off, B);
+memcpy_from_page(T, page, Off, B);
|
-memcpy(T, ptr, B);
+memcpy_from_page(T, page, 0, B);
)
...+>
(
-kunmap(page);
|
-kunmap_atomic(ptr);
)

// Remove any pointers left unused
@
depends on memcpy_rule1
@
identifier memcpy_rule1.ptr;
type VP, VP1;
@@

-VP ptr;
	... when != ptr;
? VP1 ptr;

//
// Some callers kmap without a temp pointer
//
@ memcpy_rule2 @
expression page, T, Off, F, B;
@@

<+...
(
-memcpy(kmap(page) + Off, F, B);
+memcpy_to_page(page, Off, F, B);
|
-memcpy(kmap(page), F, B);
+memcpy_to_page(page, 0, F, B);
|
-memcpy(T, kmap(page) + Off, B);
+memcpy_from_page(T, page, Off, B);
|
-memcpy(T, kmap(page), B);
+memcpy_from_page(T, page, 0, B);
)
...+>
-kunmap(page);
// No need for the ptr variable removal

//
// Catch all
//
@ memcpy_rule3 @
expression page;
expression GenTo, GenFrom, GenSize;
identifier ptr;
type VP;
@@

(
-VP ptr = kmap(page);
|
-ptr = kmap(page);
|
-VP ptr = kmap_atomic(page);
|
-ptr = kmap_atomic(page);
)
<+...
(
//
// Some call sites have complex expressions within the memcpy
// match a catch all to be evaluated by hand.
//
-memcpy(GenTo, GenFrom, GenSize);
+memcpy_to_pageExtra(page, GenTo, GenFrom, GenSize);
+memcpy_from_pageExtra(GenTo, page, GenFrom, GenSize);
)
...+>
(
-kunmap(page);
|
-kunmap_atomic(ptr);
)

// Remove any pointers left unused
@
depends on memcpy_rule3
@
identifier memcpy_rule3.ptr;
type VP, VP1;
@@

-VP ptr;
	... when != ptr;
? VP1 ptr;

// <smpl>

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-02-26 12:45:15 +01:00
Filipe Manana
3660d0bcdb btrfs: fix stale data exposure after cloning a hole with NO_HOLES enabled
When using the NO_HOLES feature, if we clone a file range that spans only
a hole into a range that is at or beyond the current i_size of the
destination file, we end up not setting the full sync runtime flag on the
inode. As a result, if we then fsync the destination file and have a power
failure, after log replay we can end up exposing stale data instead of
having a hole for that range.

The conditions for this to happen are the following:

1) We have a file with a size of, for example, 1280K;

2) There is a written (non-prealloc) extent for the file range from 1024K
   to 1280K with a length of 256K;

3) This particular file extent layout is durably persisted, so that the
   existing superblock persisted on disk points to a subvolume root where
   the file has that exact file extent layout and state;

4) The file is truncated to a smaller size, to an offset lower than the
   start offset of its last extent, for example to 800K. The truncate sets
   the full sync runtime flag on the inode;

6) Fsync the file to log it and clear the full sync runtime flag;

7) Clone a region that covers only a hole (implicit hole due to NO_HOLES)
   into the file with a destination offset that starts at or beyond the
   256K file extent item we had - for example to offset 1024K;

8) Since the clone operation does not find extents in the source range,
   we end up in the if branch at the bottom of btrfs_clone() where we
   punch a hole for the file range starting at offset 1024K by calling
   btrfs_replace_file_extents(). There we end up not setting the full
   sync flag on the inode, because we don't know we are being called in
   a clone context (and not fallocate's punch hole operation), and
   neither do we create an extent map to represent a hole because the
   requested range is beyond eof;

9) A further fsync to the file will be a fast fsync, since the clone
   operation did not set the full sync flag, and therefore it relies on
   modified extent maps to correctly log the file layout. But since
   it does not find any extent map marking the range from 1024K (the
   previous eof) to the new eof, it does not log a file extent item
   for that range representing the hole;

10) After a power failure no hole for the range starting at 1024K is
   punched and we end up exposing stale data from the old 256K extent.

Turning this into exact steps:

  $ mkfs.btrfs -f -O no-holes /dev/sdi
  $ mount /dev/sdi /mnt

  # Create our test file with 3 extents of 256K and a 256K hole at offset
  # 256K. The file has a size of 1280K.
  $ xfs_io -f -s \
              -c "pwrite -S 0xab -b 256K 0 256K" \
              -c "pwrite -S 0xcd -b 256K 512K 256K" \
              -c "pwrite -S 0xef -b 256K 768K 256K" \
              -c "pwrite -S 0x73 -b 256K 1024K 256K" \
              /mnt/sdi/foobar

  # Make sure it's durably persisted. We want the last committed super
  # block to point to this particular file extent layout.
  sync

  # Now truncate our file to a smaller size, falling within a position of
  # the second extent. This sets the full sync runtime flag on the inode.
  # Then fsync the file to log it and clear the full sync flag from the
  # inode. The third extent is no longer part of the file and therefore
  # it is not logged.
  $ xfs_io -c "truncate 800K" -c "fsync" /mnt/foobar

  # Now do a clone operation that only clones the hole and sets back the
  # file size to match the size it had before the truncate operation
  # (1280K).
  $ xfs_io \
        -c "reflink /mnt/foobar 256K 1024K 256K" \
        -c "fsync" \
        /mnt/foobar

  # File data before power failure:
  $ od -A d -t x1 /mnt/foobar
  0000000 ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab
  *
  0262144 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  *
  0524288 cd cd cd cd cd cd cd cd cd cd cd cd cd cd cd cd
  *
  0786432 ef ef ef ef ef ef ef ef ef ef ef ef ef ef ef ef
  *
  0819200 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  *
  1310720

  <power fail>

  # Mount the fs again to replay the log tree.
  $ mount /dev/sdi /mnt

  # File data after power failure:
  $ od -A d -t x1 /mnt/foobar
  0000000 ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab ab
  *
  0262144 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  *
  0524288 cd cd cd cd cd cd cd cd cd cd cd cd cd cd cd cd
  *
  0786432 ef ef ef ef ef ef ef ef ef ef ef ef ef ef ef ef
  *
  0819200 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  *
  1048576 73 73 73 73 73 73 73 73 73 73 73 73 73 73 73 73
  *
  1310720

The range from 1024K to 1280K should correspond to a hole but instead it
points to stale data, to the 256K extent that should not exist after the
truncate operation.

The issue does not exists when not using NO_HOLES, because for that case
we use file extent items to represent holes, these are found and copied
during the loop that iterates over extents at btrfs_clone(), and that
causes btrfs_replace_file_extents() to be called with a non-NULL
extent_info argument and therefore set the full sync runtime flag on the
inode.

So fix this by making the code that deals with a trailing hole during
cloning, at btrfs_clone(), to set the full sync flag on the inode, if the
range starts at or beyond the current i_size.

A test case for fstests will follow soon.

Backporting notes: for kernel 5.4 the change goes to ioctl.c into
btrfs_clone before the last call to btrfs_punch_hole_range.

CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-02-22 18:07:45 +01:00
Qu Wenruo
32443de338 btrfs: introduce btrfs_subpage for data inodes
To support subpage sector size, data also need extra info to make sure
which sectors in a page are uptodate/dirty/...

This patch will make pages for data inodes get btrfs_subpage structure
attached, and detached when the page is freed.

This patch also slightly changes the timing when
set_page_extent_mapped() is called to make sure:

- We have page->mapping set
  page->mapping->host is used to grab btrfs_fs_info, thus we can only
  call this function after page is mapped to an inode.

  One call site attaches pages to inode manually, thus we have to modify
  the timing of set_page_extent_mapped() a bit.

- As soon as possible, before other operations
  Since memory allocation can fail, we have to do extra error handling.
  Calling set_page_extent_mapped() as soon as possible can simply the
  error handling for several call sites.

The idea is pretty much the same as iomap_page, but with more bitmaps
for btrfs specific cases.

Currently the plan is to switch iomap if iomap can provide sector
aligned write back (only write back dirty sectors, but not the full
page, data balance require this feature).

So we will stick to btrfs specific bitmap for now.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-02-08 22:59:03 +01:00
Filipe Manana
3d45f221ce btrfs: fix deadlock when cloning inline extent and low on free metadata space
When cloning an inline extent there are cases where we can not just copy
the inline extent from the source range to the target range (e.g. when the
target range starts at an offset greater than zero). In such cases we copy
the inline extent's data into a page of the destination inode and then
dirty that page. However, after that we will need to start a transaction
for each processed extent and, if we are ever low on available metadata
space, we may need to flush existing delalloc for all dirty inodes in an
attempt to release metadata space - if that happens we may deadlock:

* the async reclaim task queued a delalloc work to flush delalloc for
  the destination inode of the clone operation;

* the task executing that delalloc work gets blocked waiting for the
  range with the dirty page to be unlocked, which is currently locked
  by the task doing the clone operation;

* the async reclaim task blocks waiting for the delalloc work to complete;

* the cloning task is waiting on the waitqueue of its reservation ticket
  while holding the range with the dirty page locked in the inode's
  io_tree;

* if metadata space is not released by some other task (like delalloc for
  some other inode completing for example), the clone task waits forever
  and as a consequence the delalloc work and async reclaim tasks will hang
  forever as well. Releasing more space on the other hand may require
  starting a transaction, which will hang as well when trying to reserve
  metadata space, resulting in a deadlock between all these tasks.

When this happens, traces like the following show up in dmesg/syslog:

  [87452.323003] INFO: task kworker/u16:11:1810830 blocked for more than 120 seconds.
  [87452.323644]       Tainted: G    B   W         5.10.0-rc4-btrfs-next-73 #1
  [87452.324248] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [87452.324852] task:kworker/u16:11  state:D stack:    0 pid:1810830 ppid:     2 flags:0x00004000
  [87452.325520] Workqueue: btrfs-flush_delalloc btrfs_work_helper [btrfs]
  [87452.326136] Call Trace:
  [87452.326737]  __schedule+0x5d1/0xcf0
  [87452.327390]  schedule+0x45/0xe0
  [87452.328174]  lock_extent_bits+0x1e6/0x2d0 [btrfs]
  [87452.328894]  ? finish_wait+0x90/0x90
  [87452.329474]  btrfs_invalidatepage+0x32c/0x390 [btrfs]
  [87452.330133]  ? __mod_memcg_state+0x8e/0x160
  [87452.330738]  __extent_writepage+0x2d4/0x400 [btrfs]
  [87452.331405]  extent_write_cache_pages+0x2b2/0x500 [btrfs]
  [87452.332007]  ? lock_release+0x20e/0x4c0
  [87452.332557]  ? trace_hardirqs_on+0x1b/0xf0
  [87452.333127]  extent_writepages+0x43/0x90 [btrfs]
  [87452.333653]  ? lock_acquire+0x1a3/0x490
  [87452.334177]  do_writepages+0x43/0xe0
  [87452.334699]  ? __filemap_fdatawrite_range+0xa4/0x100
  [87452.335720]  __filemap_fdatawrite_range+0xc5/0x100
  [87452.336500]  btrfs_run_delalloc_work+0x17/0x40 [btrfs]
  [87452.337216]  btrfs_work_helper+0xf1/0x600 [btrfs]
  [87452.337838]  process_one_work+0x24e/0x5e0
  [87452.338437]  worker_thread+0x50/0x3b0
  [87452.339137]  ? process_one_work+0x5e0/0x5e0
  [87452.339884]  kthread+0x153/0x170
  [87452.340507]  ? kthread_mod_delayed_work+0xc0/0xc0
  [87452.341153]  ret_from_fork+0x22/0x30
  [87452.341806] INFO: task kworker/u16:1:2426217 blocked for more than 120 seconds.
  [87452.342487]       Tainted: G    B   W         5.10.0-rc4-btrfs-next-73 #1
  [87452.343274] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [87452.344049] task:kworker/u16:1   state:D stack:    0 pid:2426217 ppid:     2 flags:0x00004000
  [87452.344974] Workqueue: events_unbound btrfs_async_reclaim_metadata_space [btrfs]
  [87452.345655] Call Trace:
  [87452.346305]  __schedule+0x5d1/0xcf0
  [87452.346947]  ? kvm_clock_read+0x14/0x30
  [87452.347676]  ? wait_for_completion+0x81/0x110
  [87452.348389]  schedule+0x45/0xe0
  [87452.349077]  schedule_timeout+0x30c/0x580
  [87452.349718]  ? _raw_spin_unlock_irqrestore+0x3c/0x60
  [87452.350340]  ? lock_acquire+0x1a3/0x490
  [87452.351006]  ? try_to_wake_up+0x7a/0xa20
  [87452.351541]  ? lock_release+0x20e/0x4c0
  [87452.352040]  ? lock_acquired+0x199/0x490
  [87452.352517]  ? wait_for_completion+0x81/0x110
  [87452.353000]  wait_for_completion+0xab/0x110
  [87452.353490]  start_delalloc_inodes+0x2af/0x390 [btrfs]
  [87452.353973]  btrfs_start_delalloc_roots+0x12d/0x250 [btrfs]
  [87452.354455]  flush_space+0x24f/0x660 [btrfs]
  [87452.355063]  btrfs_async_reclaim_metadata_space+0x1bb/0x480 [btrfs]
  [87452.355565]  process_one_work+0x24e/0x5e0
  [87452.356024]  worker_thread+0x20f/0x3b0
  [87452.356487]  ? process_one_work+0x5e0/0x5e0
  [87452.356973]  kthread+0x153/0x170
  [87452.357434]  ? kthread_mod_delayed_work+0xc0/0xc0
  [87452.357880]  ret_from_fork+0x22/0x30
  (...)
  < stack traces of several tasks waiting for the locks of the inodes of the
    clone operation >
  (...)
  [92867.444138] RSP: 002b:00007ffc3371bbe8 EFLAGS: 00000246 ORIG_RAX: 0000000000000052
  [92867.444624] RAX: ffffffffffffffda RBX: 00007ffc3371bea0 RCX: 00007f61efe73f97
  [92867.445116] RDX: 0000000000000000 RSI: 0000560fbd5d7a40 RDI: 0000560fbd5d8960
  [92867.445595] RBP: 00007ffc3371beb0 R08: 0000000000000001 R09: 0000000000000003
  [92867.446070] R10: 00007ffc3371b996 R11: 0000000000000246 R12: 0000000000000000
  [92867.446820] R13: 000000000000001f R14: 00007ffc3371bea0 R15: 00007ffc3371beb0
  [92867.447361] task:fsstress        state:D stack:    0 pid:2508238 ppid:2508153 flags:0x00004000
  [92867.447920] Call Trace:
  [92867.448435]  __schedule+0x5d1/0xcf0
  [92867.448934]  ? _raw_spin_unlock_irqrestore+0x3c/0x60
  [92867.449423]  schedule+0x45/0xe0
  [92867.449916]  __reserve_bytes+0x4a4/0xb10 [btrfs]
  [92867.450576]  ? finish_wait+0x90/0x90
  [92867.451202]  btrfs_reserve_metadata_bytes+0x29/0x190 [btrfs]
  [92867.451815]  btrfs_block_rsv_add+0x1f/0x50 [btrfs]
  [92867.452412]  start_transaction+0x2d1/0x760 [btrfs]
  [92867.453216]  clone_copy_inline_extent+0x333/0x490 [btrfs]
  [92867.453848]  ? lock_release+0x20e/0x4c0
  [92867.454539]  ? btrfs_search_slot+0x9a7/0xc30 [btrfs]
  [92867.455218]  btrfs_clone+0x569/0x7e0 [btrfs]
  [92867.455952]  btrfs_clone_files+0xf6/0x150 [btrfs]
  [92867.456588]  btrfs_remap_file_range+0x324/0x3d0 [btrfs]
  [92867.457213]  do_clone_file_range+0xd4/0x1f0
  [92867.457828]  vfs_clone_file_range+0x4d/0x230
  [92867.458355]  ? lock_release+0x20e/0x4c0
  [92867.458890]  ioctl_file_clone+0x8f/0xc0
  [92867.459377]  do_vfs_ioctl+0x342/0x750
  [92867.459913]  __x64_sys_ioctl+0x62/0xb0
  [92867.460377]  do_syscall_64+0x33/0x80
  [92867.460842]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
  (...)
  < stack traces of more tasks blocked on metadata reservation like the clone
    task above, because the async reclaim task has deadlocked >
  (...)

Another thing to notice is that the worker task that is deadlocked when
trying to flush the destination inode of the clone operation is at
btrfs_invalidatepage(). This is simply because the clone operation has a
destination offset greater than the i_size and we only update the i_size
of the destination file after cloning an extent (just like we do in the
buffered write path).

Since the async reclaim path uses btrfs_start_delalloc_roots() to trigger
the flushing of delalloc for all inodes that have delalloc, add a runtime
flag to an inode to signal it should not be flushed, and for inodes with
that flag set, start_delalloc_inodes() will simply skip them. When the
cloning code needs to dirty a page to copy an inline extent, set that flag
on the inode and then clear it when the clone operation finishes.

This could be sporadically triggered with test case generic/269 from
fstests, which exercises many fsstress processes running in parallel with
several dd processes filling up the entire filesystem.

CC: stable@vger.kernel.org # 5.9+
Fixes: 05a5a7621c ("Btrfs: implement full reflink support for inline extents")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-12-18 14:49:50 +01:00
Nikolay Borisov
b06359a325 btrfs: make btrfs_cont_expand take btrfs_inode
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-12-08 15:54:12 +01:00
Nikolay Borisov
9a56fcd15a btrfs: make btrfs_update_inode take btrfs_inode
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-12-08 15:54:11 +01:00
Nikolay Borisov
76aea53796 btrfs: make btrfs_inode_safe_disk_i_size_write take btrfs_inode
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-12-08 15:54:10 +01:00
Filipe Manana
2766ff6176 btrfs: update the number of bytes used by an inode atomically
There are several occasions where we do not update the inode's number of
used bytes atomically, resulting in a concurrent stat(2) syscall to report
a value of used blocks that does not correspond to a valid value, that is,
a value that does not match neither what we had before the operation nor
what we get after the operation completes.

In extreme cases it can result in stat(2) reporting zero used blocks, which
can cause problems for some userspace tools where they can consider a file
with a non-zero size and zero used blocks as completely sparse and skip
reading data, as reported/discussed a long time ago in some threads like
the following:

  https://lists.gnu.org/archive/html/bug-tar/2016-07/msg00001.html

The cases where this can happen are the following:

-> Case 1

If we do a write (buffered or direct IO) against a file region for which
there is already an allocated extent (or multiple extents), then we have a
short time window where we can report a number of used blocks to stat(2)
that does not take into account the file region being overwritten. This
short time window happens when completing the ordered extent(s).

This happens because when we drop the extents in the write range we
decrement the inode's number of bytes and later on when we insert the new
extent(s) we increment the number of bytes in the inode, resulting in a
short time window where a stat(2) syscall can get an incorrect number of
used blocks.

If we do writes that overwrite an entire file, then we have a short time
window where we report 0 used blocks to stat(2).

Example reproducer:

  $ cat reproducer-1.sh
  #!/bin/bash

  MNT=/mnt/sdi
  DEV=/dev/sdi

  stat_loop()
  {
      trap "wait; exit" SIGTERM
      local filepath=$1
      local expected=$2
      local got

      while :; do
          got=$(stat -c %b $filepath)
          if [ $got -ne $expected ]; then
             echo -n "ERROR: unexpected used blocks"
             echo " (got: $got expected: $expected)"
          fi
      done
  }

  mkfs.btrfs -f $DEV > /dev/null
  # mkfs.xfs -f $DEV > /dev/null
  # mkfs.ext4 -F $DEV > /dev/null
  # mkfs.f2fs -f $DEV > /dev/null
  # mkfs.reiserfs -f $DEV > /dev/null
  mount $DEV $MNT

  xfs_io -f -s -c "pwrite -b 64K 0 64K" $MNT/foobar >/dev/null
  expected=$(stat -c %b $MNT/foobar)

  # Create a process to keep calling stat(2) on the file and see if the
  # reported number of blocks used (disk space used) changes, it should
  # not because we are not increasing the file size nor punching holes.
  stat_loop $MNT/foobar $expected &
  loop_pid=$!

  for ((i = 0; i < 50000; i++)); do
      xfs_io -s -c "pwrite -b 64K 0 64K" $MNT/foobar >/dev/null
  done

  kill $loop_pid &> /dev/null
  wait

  umount $DEV

  $ ./reproducer-1.sh
  ERROR: unexpected used blocks (got: 0 expected: 128)
  ERROR: unexpected used blocks (got: 0 expected: 128)
  (...)

Note that since this is a short time window where the race can happen, the
reproducer may not be able to always trigger the bug in one run, or it may
trigger it multiple times.

-> Case 2

If we do a buffered write against a file region that does not have any
allocated extents, like a hole or beyond EOF, then during ordered extent
completion we have a short time window where a concurrent stat(2) syscall
can report a number of used blocks that does not correspond to the value
before or after the write operation, a value that is actually larger than
the value after the write completes.

This happens because once we start a buffered write into an unallocated
file range we increment the inode's 'new_delalloc_bytes', to make sure
any stat(2) call gets a correct used blocks value before delalloc is
flushed and completes. However at ordered extent completion, after we
inserted the new extent, we increment the inode's number of bytes used
with the size of the new extent, and only later, when clearing the range
in the inode's iotree, we decrement the inode's 'new_delalloc_bytes'
counter with the size of the extent. So this results in a short time
window where a concurrent stat(2) syscall can report a number of used
blocks that accounts for the new extent twice.

Example reproducer:

  $ cat reproducer-2.sh
  #!/bin/bash

  MNT=/mnt/sdi
  DEV=/dev/sdi

  stat_loop()
  {
      trap "wait; exit" SIGTERM
      local filepath=$1
      local expected=$2
      local got

      while :; do
          got=$(stat -c %b $filepath)
          if [ $got -ne $expected ]; then
              echo -n "ERROR: unexpected used blocks"
              echo " (got: $got expected: $expected)"
          fi
      done
  }

  mkfs.btrfs -f $DEV > /dev/null
  # mkfs.xfs -f $DEV > /dev/null
  # mkfs.ext4 -F $DEV > /dev/null
  # mkfs.f2fs -f $DEV > /dev/null
  # mkfs.reiserfs -f $DEV > /dev/null
  mount $DEV $MNT

  touch $MNT/foobar
  write_size=$((64 * 1024))
  for ((i = 0; i < 16384; i++)); do
     offset=$(($i * $write_size))
     xfs_io -c "pwrite -S 0xab $offset $write_size" $MNT/foobar >/dev/null
     blocks_used=$(stat -c %b $MNT/foobar)

     # Fsync the file to trigger writeback and keep calling stat(2) on it
     # to see if the number of blocks used changes.
     stat_loop $MNT/foobar $blocks_used &
     loop_pid=$!
     xfs_io -c "fsync" $MNT/foobar

     kill $loop_pid &> /dev/null
     wait $loop_pid
  done

  umount $DEV

  $ ./reproducer-2.sh
  ERROR: unexpected used blocks (got: 265472 expected: 265344)
  ERROR: unexpected used blocks (got: 284032 expected: 283904)
  (...)

Note that since this is a short time window where the race can happen, the
reproducer may not be able to always trigger the bug in one run, or it may
trigger it multiple times.

-> Case 3

Another case where such problems happen is during other operations that
replace extents in a file range with other extents. Those operations are
extent cloning, deduplication and fallocate's zero range operation.

The cause of the problem is similar to the first case. When we drop the
extents from a range, we decrement the inode's number of bytes, and later
on, after inserting the new extents we increment it. Since this is not
done atomically, a concurrent stat(2) call can see and return a number of
used blocks that is smaller than it should be, does not match the number
of used blocks before or after the clone/deduplication/zero operation.

Like for the first case, when doing a clone, deduplication or zero range
operation against an entire file, we end up having a time window where we
can report 0 used blocks to a stat(2) call.

Example reproducer:

  $ cat reproducer-3.sh
  #!/bin/bash

  MNT=/mnt/sdi
  DEV=/dev/sdi

  mkfs.btrfs -f $DEV > /dev/null
  # mkfs.xfs -f -m reflink=1 $DEV > /dev/null
  mount $DEV $MNT

  extent_size=$((64 * 1024))
  num_extents=16384
  file_size=$(($extent_size * $num_extents))

  # File foo has many small extents.
  xfs_io -f -s -c "pwrite -S 0xab -b $extent_size 0 $file_size" $MNT/foo \
      > /dev/null
  # File bar has much less extents and has exactly the same data as foo.
  xfs_io -f -c "pwrite -S 0xab 0 $file_size" $MNT/bar > /dev/null

  expected=$(stat -c %b $MNT/foo)

  # Now deduplicate bar into foo. While the deduplication is in progres,
  # the number of used blocks/file size reported by stat should not change
  xfs_io -c "dedupe $MNT/bar 0 0 $file_size" $MNT/foo > /dev/null  &
  dedupe_pid=$!
  while [ -n "$(ps -p $dedupe_pid -o pid=)" ]; do
      used=$(stat -c %b $MNT/foo)
      if [ $used -ne $expected ]; then
          echo "Unexpected blocks used: $used (expected: $expected)"
      fi
  done

  umount $DEV

  $ ./reproducer-3.sh
  Unexpected blocks used: 2076800 (expected: 2097152)
  Unexpected blocks used: 2097024 (expected: 2097152)
  Unexpected blocks used: 2079872 (expected: 2097152)
  (...)

Note that since this is a short time window where the race can happen, the
reproducer may not be able to always trigger the bug in one run, or it may
trigger it multiple times.

So fix this by:

1) Making btrfs_drop_extents() not decrement the VFS inode's number of
   bytes, and instead return the number of bytes;

2) Making any code that drops extents and adds new extents update the
   inode's number of bytes atomically, while holding the btrfs inode's
   spinlock, which is also used by the stat(2) callback to get the inode's
   number of bytes;

3) For ranges in the inode's iotree that are marked as 'delalloc new',
   corresponding to previously unallocated ranges, increment the inode's
   number of bytes when clearing the 'delalloc new' bit from the range,
   in the same critical section that decrements the inode's
   'new_delalloc_bytes' counter, delimited by the btrfs inode's spinlock.

An alternative would be to have btrfs_getattr() wait for any IO (ordered
extents in progress) and locking the whole range (0 to (u64)-1) while it
it computes the number of blocks used. But that would mean blocking
stat(2), which is a very used syscall and expected to be fast, waiting
for writes, clone/dedupe, fallocate, page reads, fiemap, etc.

CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-12-08 15:54:08 +01:00
Filipe Manana
5893dfb98f btrfs: refactor btrfs_drop_extents() to make it easier to extend
There are many arguments for __btrfs_drop_extents() and its wrapper
btrfs_drop_extents(), which makes it hard to add more arguments to it and
requires changing every caller. I have added a couple myself back in 2014
commit 1acae57b16 ("Btrfs: faster file extent item replace operations")
and therefore know firsthand that it is a bit cumbersome to add additional
arguments to these functions.

Since I will need to add more arguments in a subsequent bug fix, this
change is preparatory work and adds a data structure that holds all the
arguments, for both input and output, that are passed to this function,
with some comments in the structure's definition mentioning what each
field is and how it relates to other fields.

Callers of this function need only to zero out the content of the
structure and setup only the fields they need. This also removes the
need to have both __btrfs_drop_extents() and btrfs_drop_extents(), so
now we have a single function named btrfs_drop_extents() that takes a
pointer to this new data structure (struct btrfs_drop_extents_args).

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-12-08 15:54:08 +01:00
Josef Bacik
b9729ce014 btrfs: locking: rip out path->leave_spinning
We no longer distinguish between blocking and spinning, so rip out all
this code.

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-12-08 15:54:02 +01:00
Johannes Thumshirn
6b613cc97f btrfs: reschedule when cloning lots of extents
We have several occurrences of a soft lockup from fstest's generic/175
testcase, which look more or less like this one:

  watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [xfs_io:10030]
  Kernel panic - not syncing: softlockup: hung tasks
  CPU: 0 PID: 10030 Comm: xfs_io Tainted: G             L    5.9.0-rc5+ #768
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4-rebuilt.opensuse.org 04/01/2014
  Call Trace:
   <IRQ>
   dump_stack+0x77/0xa0
   panic+0xfa/0x2cb
   watchdog_timer_fn.cold+0x85/0xa5
   ? lockup_detector_update_enable+0x50/0x50
   __hrtimer_run_queues+0x99/0x4c0
   ? recalibrate_cpu_khz+0x10/0x10
   hrtimer_run_queues+0x9f/0xb0
   update_process_times+0x28/0x80
   tick_handle_periodic+0x1b/0x60
   __sysvec_apic_timer_interrupt+0x76/0x210
   asm_call_on_stack+0x12/0x20
   </IRQ>
   sysvec_apic_timer_interrupt+0x7f/0x90
   asm_sysvec_apic_timer_interrupt+0x12/0x20
  RIP: 0010:btrfs_tree_unlock+0x91/0x1a0 [btrfs]
  RSP: 0018:ffffc90007123a58 EFLAGS: 00000282
  RAX: ffff8881cea2fbe0 RBX: ffff8881cea2fbe0 RCX: 0000000000000000
  RDX: ffff8881d23fd200 RSI: ffffffff82045220 RDI: ffff8881cea2fba0
  RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000032
  R10: 0000160000000000 R11: 0000000000001000 R12: 0000000000001000
  R13: ffff8882357fd5b0 R14: ffff88816fa76e70 R15: ffff8881cea2fad0
   ? btrfs_tree_unlock+0x15b/0x1a0 [btrfs]
   btrfs_release_path+0x67/0x80 [btrfs]
   btrfs_insert_replace_extent+0x177/0x2c0 [btrfs]
   btrfs_replace_file_extents+0x472/0x7c0 [btrfs]
   btrfs_clone+0x9ba/0xbd0 [btrfs]
   btrfs_clone_files.isra.0+0xeb/0x140 [btrfs]
   ? file_update_time+0xcd/0x120
   btrfs_remap_file_range+0x322/0x3b0 [btrfs]
   do_clone_file_range+0xb7/0x1e0
   vfs_clone_file_range+0x30/0xa0
   ioctl_file_clone+0x8a/0xc0
   do_vfs_ioctl+0x5b2/0x6f0
   __x64_sys_ioctl+0x37/0xa0
   do_syscall_64+0x33/0x40
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f87977fc247
  RSP: 002b:00007ffd51a2f6d8 EFLAGS: 00000206 ORIG_RAX: 0000000000000010
  RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f87977fc247
  RDX: 00007ffd51a2f710 RSI: 000000004020940d RDI: 0000000000000003
  RBP: 0000000000000004 R08: 00007ffd51a79080 R09: 0000000000000000
  R10: 00005621f11352f2 R11: 0000000000000206 R12: 0000000000000000
  R13: 0000000000000000 R14: 00005621f128b958 R15: 0000000080000000
  Kernel Offset: disabled
  ---[ end Kernel panic - not syncing: softlockup: hung tasks ]---

All of these lockup reports have the call chain btrfs_clone_files() ->
btrfs_clone() in common. btrfs_clone_files() calls btrfs_clone() with
both source and destination extents locked and loops over the source
extent to create the clones.

Conditionally reschedule in the btrfs_clone() loop, to give some time back
to other processes.

CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-07 12:13:22 +02:00
Filipe Manana
306bfec02b btrfs: rename btrfs_punch_hole_range() to a more generic name
The function btrfs_punch_hole_range() is now used to replace all the file
extents in a given file range with an extent described in the given struct
btrfs_replace_extent_info argument. This extent can either be an existing
extent that is being cloned or it can be a new extent (namely a prealloc
extent). When that argument is NULL it only punches a hole (drops all the
existing extents) in the file range.

So rename the function to btrfs_replace_file_extents().

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-07 12:13:17 +02:00
Filipe Manana
bf385648fa btrfs: rename struct btrfs_clone_extent_info to a more generic name
Now that we can use btrfs_clone_extent_info to convey information for a
new prealloc extent as well, and not just for existing extents that are
being cloned, rename it to btrfs_replace_extent_info, which reflects the
fact that this is now more generic and it is used to replace all existing
extents in a file range with the extent described by the structure.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-07 12:13:16 +02:00
Filipe Manana
fb870f6cdd btrfs: remove item_size member of struct btrfs_clone_extent_info
The value of item_size of struct btrfs_clone_extent_info is always set to
the size of a non-inline file extent item, and in fact the infrastructure
that uses this structure (btrfs_punch_hole_range()) does not work with
inline file extents at all (and it is not supposed to).

So just remove that field from the structure and use directly
sizeof(struct btrfs_file_extent_item) instead. Also assert that the
file extent type is not inline at btrfs_insert_clone_extent().

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-07 12:13:16 +02:00
Filipe Manana
8fccebfa53 btrfs: fix metadata reservation for fallocate that leads to transaction aborts
When doing an fallocate(), specially a zero range operation, we assume
that reserving 3 units of metadata space is enough, that at most we touch
one leaf in subvolume/fs tree for removing existing file extent items and
inserting a new file extent item. This assumption is generally true for
most common use cases. However when we end up needing to remove file extent
items from multiple leaves, we can end up failing with -ENOSPC and abort
the current transaction, turning the filesystem to RO mode. When this
happens a stack trace like the following is dumped in dmesg/syslog:

[ 1500.620934] ------------[ cut here ]------------
[ 1500.620938] BTRFS: Transaction aborted (error -28)
[ 1500.620973] WARNING: CPU: 2 PID: 30807 at fs/btrfs/inode.c:9724 __btrfs_prealloc_file_range+0x512/0x570 [btrfs]
[ 1500.620974] Modules linked in: btrfs intel_rapl_msr intel_rapl_common kvm_intel (...)
[ 1500.621010] CPU: 2 PID: 30807 Comm: xfs_io Tainted: G        W         5.9.0-rc3-btrfs-next-67 #1
[ 1500.621012] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 1500.621023] RIP: 0010:__btrfs_prealloc_file_range+0x512/0x570 [btrfs]
[ 1500.621026] Code: 8b 40 50 f0 48 (...)
[ 1500.621028] RSP: 0018:ffffb05fc8803ca0 EFLAGS: 00010286
[ 1500.621030] RAX: 0000000000000000 RBX: ffff9608af276488 RCX: 0000000000000000
[ 1500.621032] RDX: 0000000000000001 RSI: 0000000000000027 RDI: 00000000ffffffff
[ 1500.621033] RBP: ffffb05fc8803d90 R08: 0000000000000001 R09: 0000000000000001
[ 1500.621035] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000003200000
[ 1500.621037] R13: 00000000ffffffe4 R14: ffff9608af275fe8 R15: ffff9608af275f60
[ 1500.621039] FS:  00007fb5b2368ec0(0000) GS:ffff9608b6600000(0000) knlGS:0000000000000000
[ 1500.621041] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1500.621043] CR2: 00007fb5b2366fb8 CR3: 0000000202d38005 CR4: 00000000003706e0
[ 1500.621046] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1500.621047] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 1500.621049] Call Trace:
[ 1500.621076]  btrfs_prealloc_file_range+0x10/0x20 [btrfs]
[ 1500.621087]  btrfs_fallocate+0xccd/0x1280 [btrfs]
[ 1500.621108]  vfs_fallocate+0x14d/0x290
[ 1500.621112]  ksys_fallocate+0x3a/0x70
[ 1500.621117]  __x64_sys_fallocate+0x1a/0x20
[ 1500.621120]  do_syscall_64+0x33/0x80
[ 1500.621123]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 1500.621126] RIP: 0033:0x7fb5b248c477
[ 1500.621128] Code: 89 7c 24 08 (...)
[ 1500.621130] RSP: 002b:00007ffc7bee9060 EFLAGS: 00000293 ORIG_RAX: 000000000000011d
[ 1500.621132] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007fb5b248c477
[ 1500.621134] RDX: 0000000000000000 RSI: 0000000000000010 RDI: 0000000000000003
[ 1500.621136] RBP: 0000557718faafd0 R08: 0000000000000000 R09: 0000000000000000
[ 1500.621137] R10: 0000000003200000 R11: 0000000000000293 R12: 0000000000000010
[ 1500.621139] R13: 0000557718faafb0 R14: 0000557718faa480 R15: 0000000000000003
[ 1500.621151] irq event stamp: 1026217
[ 1500.621154] hardirqs last  enabled at (1026223): [<ffffffffba965570>] console_unlock+0x500/0x5c0
[ 1500.621156] hardirqs last disabled at (1026228): [<ffffffffba9654c7>] console_unlock+0x457/0x5c0
[ 1500.621159] softirqs last  enabled at (1022486): [<ffffffffbb6003dc>] __do_softirq+0x3dc/0x606
[ 1500.621161] softirqs last disabled at (1022477): [<ffffffffbb4010b2>] asm_call_on_stack+0x12/0x20
[ 1500.621162] ---[ end trace 2955b08408d8b9d4 ]---
[ 1500.621167] BTRFS: error (device sdj) in __btrfs_prealloc_file_range:9724: errno=-28 No space left

When we use fallocate() internally, for reserving an extent for a space
cache, inode cache or relocation, we can't hit this problem since either
there aren't any file extent items to remove from the subvolume tree or
there is at most one.

When using plain fallocate() it's very unlikely, since that would require
having many file extent items representing holes for the target range and
crossing multiple leafs - we attempt to increase the range (merge) of such
file extent items when punching holes, so at most we end up with 2 file
extent items for holes at leaf boundaries.

However when using the zero range operation of fallocate() for a large
range (100+ MiB for example) that's fairly easy to trigger. The following
example reproducer triggers the issue:

  $ cat reproducer.sh
  #!/bin/bash

  umount /dev/sdj &> /dev/null
  mkfs.btrfs -f -n 16384 -O ^no-holes /dev/sdj > /dev/null
  mount /dev/sdj /mnt/sdj

  # Create a 100M file with many file extent items. Punch a hole every 8K
  # just to speedup the file creation - we could do 4K sequential writes
  # followed by fsync (or O_SYNC) as well, but that takes a lot of time.
  file_size=$((100 * 1024 * 1024))
  xfs_io -f -c "pwrite -S 0xab -b 10M 0 $file_size" /mnt/sdj/foobar
  for ((i = 0; i < $file_size; i += 8192)); do
      xfs_io -c "fpunch $i 4096" /mnt/sdj/foobar
  done

  # Force a transaction commit, so the zero range operation will be forced
  # to COW all metadata extents it need to touch.
  sync

  xfs_io -c "fzero 0 $file_size" /mnt/sdj/foobar

  umount /mnt/sdj

  $ ./reproducer.sh
  wrote 104857600/104857600 bytes at offset 0
  100 MiB, 10 ops; 0.0669 sec (1.458 GiB/sec and 149.3117 ops/sec)
  fallocate: No space left on device

  $ dmesg
  <shows the same stack trace pasted before>

To fix this use the existing infrastructure that hole punching and
extent cloning use for replacing a file range with another extent. This
deals with doing the removal of file extent items and inserting the new
one using an incremental approach, reserving more space when needed and
always ensuring we don't leave an implicit hole in the range in case
we need to do multiple iterations and a crash happens between iterations.

A test case for fstests will follow up soon.

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-07 12:13:16 +02:00
Nikolay Borisov
998acfe8ff btrfs: make copy_inline_to_page take btrfs_inode
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-07 12:12:19 +02:00
Nikolay Borisov
6fee248d2b btrfs: convert btrfs_inode_sectorsize to take btrfs_inode
It's counterintuitive to have a function named btrfs_inode_xxx which
takes a generic inode. Also move the function to btrfs_inode.h so that
it has access to the definition of struct btrfs_inode.

Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-10-07 12:12:18 +02:00
Filipe Manana
3ebac17ce5 btrfs: reduce contention on log trees when logging checksums
The possibility of extents being shared (through clone and deduplication
operations) requires special care when logging data checksums, to avoid
having a log tree with different checksum items that cover ranges which
overlap (which resulted in missing checksums after replaying a log tree).
Such problems were fixed in the past by the following commits:

commit 40e046acbd ("Btrfs: fix missing data checksums after replaying a
                      log tree")

commit e289f03ea7 ("btrfs: fix corrupt log due to concurrent fsync of
                      inodes with shared extents")

Test case generic/588 exercises the scenario solved by the first commit
(purely sequential and deterministic) while test case generic/457 often
triggered the case fixed by the second commit (not deterministic, requires
specific timings under concurrency).

The problems were addressed by deleting, from the log tree, any existing
checksums before logging the new ones. And also by doing the deletion and
logging of the cheksums while locking the checksum range in an extent io
tree (root->log_csum_range), to deal with the case where we have concurrent
fsyncs against files with shared extents.

That however causes more contention on the leaves of a log tree where we
store checksums (and all the nodes in the paths leading to them), even
when we do not have shared extents, or all the shared extents were created
by past transactions. It also adds a bit of contention on the spin lock of
the log_csums_range extent io tree of the log root.

This change adds a 'last_reflink_trans' field to the inode to keep track
of the last transaction where a new extent was shared between inodes
(through clone and deduplication operations). It is updated for both the
source and destination inodes of reflink operations whenever a new extent
(created in the current transaction) becomes shared by the inodes. This
field is kept in memory only, not persisted in the inode item, similar
to other existing fields (last_unlink_trans, logged_trans).

When logging checksums for an extent, if the value of 'last_reflink_trans'
is smaller then the current transaction's generation/id, we skip locking
the extent range and deletion of checksums from the log tree, since we
know we do not have new shared extents. This reduces contention on the
log tree's leaves where checksums are stored.

The following script, which uses fio, was used to measure the impact of
this change:

  $ cat test-fsync.sh
  #!/bin/bash

  DEV=/dev/sdk
  MNT=/mnt/sdk
  MOUNT_OPTIONS="-o ssd"
  MKFS_OPTIONS="-d single -m single"

  if [ $# -ne 3 ]; then
      echo "Use $0 NUM_JOBS FILE_SIZE FSYNC_FREQ"
      exit 1
  fi

  NUM_JOBS=$1
  FILE_SIZE=$2
  FSYNC_FREQ=$3

  cat <<EOF > /tmp/fio-job.ini
  [writers]
  rw=write
  fsync=$FSYNC_FREQ
  fallocate=none
  group_reporting=1
  direct=0
  bs=64k
  ioengine=sync
  size=$FILE_SIZE
  directory=$MNT
  numjobs=$NUM_JOBS
  EOF

  echo "Using config:"
  echo
  cat /tmp/fio-job.ini
  echo

  mkfs.btrfs -f $MKFS_OPTIONS $DEV
  mount $MOUNT_OPTIONS $DEV $MNT
  fio /tmp/fio-job.ini
  umount $MNT

The tests were performed for different numbers of jobs, file sizes and
fsync frequency. A qemu VM using kvm was used, with 8 cores (the host has
12 cores, with cpu governance set to performance mode on all cores), 16GiB
of ram (the host has 64GiB) and using a NVMe device directly (without an
intermediary filesystem in the host). While running the tests, the host
was not used for anything else, to avoid disturbing the tests.

The obtained results were the following (the last line of fio's output was
pasted). Starting with 16 jobs is where a significant difference is
observable in this particular setup and hardware (differences highlighted
below). The very small differences for tests with less than 16 jobs are
possibly just noise and random.

    **** 1 job, file size 1G, fsync frequency 1 ****

before this change:

WRITE: bw=23.8MiB/s (24.9MB/s), 23.8MiB/s-23.8MiB/s (24.9MB/s-24.9MB/s), io=1024MiB (1074MB), run=43075-43075msec

after this change:

WRITE: bw=24.4MiB/s (25.6MB/s), 24.4MiB/s-24.4MiB/s (25.6MB/s-25.6MB/s), io=1024MiB (1074MB), run=41938-41938msec

    **** 2 jobs, file size 1G, fsync frequency 1 ****

before this change:

WRITE: bw=37.7MiB/s (39.5MB/s), 37.7MiB/s-37.7MiB/s (39.5MB/s-39.5MB/s), io=2048MiB (2147MB), run=54351-54351msec

after this change:

WRITE: bw=37.7MiB/s (39.5MB/s), 37.6MiB/s-37.6MiB/s (39.5MB/s-39.5MB/s), io=2048MiB (2147MB), run=54428-54428msec

    **** 4 jobs, file size 1G, fsync frequency 1 ****

before this change:

WRITE: bw=67.5MiB/s (70.8MB/s), 67.5MiB/s-67.5MiB/s (70.8MB/s-70.8MB/s), io=4096MiB (4295MB), run=60669-60669msec

after this change:

WRITE: bw=68.6MiB/s (71.0MB/s), 68.6MiB/s-68.6MiB/s (71.0MB/s-71.0MB/s), io=4096MiB (4295MB), run=59678-59678msec

    **** 8 jobs, file size 1G, fsync frequency 1 ****

before this change:

WRITE: bw=128MiB/s (134MB/s), 128MiB/s-128MiB/s (134MB/s-134MB/s), io=8192MiB (8590MB), run=64048-64048msec

after this change:

WRITE: bw=129MiB/s (135MB/s), 129MiB/s-129MiB/s (135MB/s-135MB/s), io=8192MiB (8590MB), run=63405-63405msec

    **** 16 jobs, file size 1G, fsync frequency 1 ****

before this change:

WRITE: bw=78.5MiB/s (82.3MB/s), 78.5MiB/s-78.5MiB/s (82.3MB/s-82.3MB/s), io=16.0GiB (17.2GB), run=208676-208676msec

after this change:

WRITE: bw=110MiB/s (115MB/s), 110MiB/s-110MiB/s (115MB/s-115MB/s), io=16.0GiB (17.2GB), run=149295-149295msec
(+40.1% throughput, -28.5% runtime)

    **** 32 jobs, file size 1G, fsync frequency 1 ****

before this change:

WRITE: bw=58.8MiB/s (61.7MB/s), 58.8MiB/s-58.8MiB/s (61.7MB/s-61.7MB/s), io=32.0GiB (34.4GB), run=557134-557134msec

after this change:

WRITE: bw=76.1MiB/s (79.8MB/s), 76.1MiB/s-76.1MiB/s (79.8MB/s-79.8MB/s), io=32.0GiB (34.4GB), run=430550-430550msec
(+29.4% throughput, -22.7% runtime)

    **** 64 jobs, file size 512M, fsync frequency 1 ****

before this change:

WRITE: bw=65.8MiB/s (68.0MB/s), 65.8MiB/s-65.8MiB/s (68.0MB/s-68.0MB/s), io=32.0GiB (34.4GB), run=498055-498055msec

after this change:

WRITE: bw=85.1MiB/s (89.2MB/s), 85.1MiB/s-85.1MiB/s (89.2MB/s-89.2MB/s), io=32.0GiB (34.4GB), run=385116-385116msec
(+29.3% throughput, -22.7% runtime)

    **** 128 jobs, file size 256M, fsync frequency 1 ****

before this change:

WRITE: bw=54.7MiB/s (57.3MB/s), 54.7MiB/s-54.7MiB/s (57.3MB/s-57.3MB/s), io=32.0GiB (34.4GB), run=599373-599373msec

after this change:

WRITE: bw=121MiB/s (126MB/s), 121MiB/s-121MiB/s (126MB/s-126MB/s), io=32.0GiB (34.4GB), run=271907-271907msec
(+121.2% throughput, -54.6% runtime)

    **** 256 jobs, file size 256M, fsync frequency 1 ****

before this change:

WRITE: bw=69.2MiB/s (72.5MB/s), 69.2MiB/s-69.2MiB/s (72.5MB/s-72.5MB/s), io=64.0GiB (68.7GB), run=947536-947536msec

after this change:

WRITE: bw=121MiB/s (127MB/s), 121MiB/s-121MiB/s (127MB/s-127MB/s), io=64.0GiB (68.7GB), run=541916-541916msec
(+74.9% throughput, -42.8% runtime)

    **** 512 jobs, file size 128M, fsync frequency 1 ****

before this change:

WRITE: bw=85.4MiB/s (89.5MB/s), 85.4MiB/s-85.4MiB/s (89.5MB/s-89.5MB/s), io=64.0GiB (68.7GB), run=767734-767734msec

after this change:

WRITE: bw=141MiB/s (147MB/s), 141MiB/s-141MiB/s (147MB/s-147MB/s), io=64.0GiB (68.7GB), run=466022-466022msec
(+65.1% throughput, -39.3% runtime)

    **** 1024 jobs, file size 128M, fsync frequency 1 ****

before this change:

WRITE: bw=115MiB/s (120MB/s), 115MiB/s-115MiB/s (120MB/s-120MB/s), io=128GiB (137GB), run=1143775-1143775msec

after this change:

WRITE: bw=171MiB/s (180MB/s), 171MiB/s-171MiB/s (180MB/s-180MB/s), io=128GiB (137GB), run=764843-764843msec
(+48.7% throughput, -33.1% runtime)

Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2020-07-27 12:55:45 +02:00