RISC-V has the concept of a cpu level interrupt controller. The
interface for it is split between a standardized part that is exposed
as bits in the mstatus/sstatus register and the mie/mip/sie/sip
CRS. But the bit to actually trigger IPIs is not standardized and
just mentioned as implementable using MMIO.
Add support for IPIs using MMIO using the SiFive clint layout (which
is also shared by Ariane, Kendryte and the Qemu virt platform).
Additionally the MMIO block also supports the time value and timer
compare registers, so they are also set up using the same OF node.
Support for other layouts should also be relatively easy to add in the
future.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
[paul.walmsley@sifive.com: update include guard format; fix checkpatch
issues; minor commit message cleanup]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Move the sbi poweroff to a separate function and file that is only
compiled if CONFIG_SBI is set.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
[paul.walmsley@sifive.com: split the WFI fix into a separate patch]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Many of the privileged CSRs exist in a supervisor and machine version
that are used very similarly. Provide versions of the CSR names and
fields that map to either the S-mode or M-mode variant depending on
a new CONFIG_RISCV_M_MODE kconfig symbol.
Contains contributions from Damien Le Moal <Damien.LeMoal@wdc.com>
and Paul Walmsley <paul.walmsley@sifive.com>.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de> # for drivers/clocksource, drivers/irqchip
[paul.walmsley@sifive.com: updated to apply]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Provide a new default fallback power off that just sits in a wfi loop
to save some power.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
[paul.walmsley@sifive.com: split the WFI fix apart from the
nommu-related default_power_off() changes]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
This patch was extensively tested on Fedora/RISCV (applied by default on
top of 5.2-rc7 kernel for <2 months). The patch was also tested with 5.3-rc
on QEMU and SiFive Unleashed board.
libseccomp (userspace) was rebased:
https://github.com/seccomp/libseccomp/pull/134
Fully passes libseccomp regression testing (simulation and live).
There is one failing kernel selftest: global.user_notification_signal
v1 -> v2:
- return immediately if secure_computing(NULL) returns -1
- fixed whitespace issues
- add missing seccomp.h
- remove patch #2 (solved now)
- add riscv to seccomp kernel selftest
Signed-off-by: David Abdurachmanov <david.abdurachmanov@sifive.com>
Cc: keescook@chromium.org
Cc: me@carlosedp.com
Tested-by: Carlos de Paula <me@carlosedp.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/linux-riscv/CAEn-LTp=ss0Dfv6J00=rCAy+N78U2AmhqJNjfqjr2FDpPYjxEQ@mail.gmail.com/
Link: https://lore.kernel.org/linux-riscv/CAJr-aD=UnCN9E_mdVJ2H5nt=6juRSWikZnA5HxDLQxXLbsRz-w@mail.gmail.com/
[paul.walmsley@sifive.com: cleaned up Cc: lines; fixed spelling and
checkpatch issues; updated to apply]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
/proc/cpuinfo should just print all the isa string as an information
instead of determining what is supported or not. ELF hwcap can be
used by the userspace to figure out that.
Simplify the isa string printing by removing the unsupported isa string
print and all related code.
The relevant discussion can be found at
http://lists.infradead.org/pipermail/linux-riscv/2019-September/006702.html
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: http://lists.infradead.org/pipermail/linux-riscv/2019-September/006702.html
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Rather than adding prototypes for C functions called only by assembly
code, mark them as __visible. This avoids adding prototypes that will
never be used by the callers. Resolves the following sparse warnings:
arch/riscv/kernel/irq.c:27:29: warning: symbol 'do_IRQ' was not declared. Should it be static?
arch/riscv/kernel/ptrace.c:151:6: warning: symbol 'do_syscall_trace_enter' was not declared. Should it be static?
arch/riscv/kernel/ptrace.c:165:6: warning: symbol 'do_syscall_trace_exit' was not declared. Should it be static?
arch/riscv/kernel/signal.c:295:17: warning: symbol 'do_notify_resume' was not declared. Should it be static?
arch/riscv/kernel/traps.c:92:1: warning: symbol 'do_trap_unknown' was not declared. Should it be static?
arch/riscv/kernel/traps.c:94:1: warning: symbol 'do_trap_insn_misaligned' was not declared. Should it be static?
arch/riscv/kernel/traps.c:96:1: warning: symbol 'do_trap_insn_fault' was not declared. Should it be static?
arch/riscv/kernel/traps.c:98:1: warning: symbol 'do_trap_insn_illegal' was not declared. Should it be static?
arch/riscv/kernel/traps.c💯1: warning: symbol 'do_trap_load_misaligned' was not declared. Should it be static?
arch/riscv/kernel/traps.c:102:1: warning: symbol 'do_trap_load_fault' was not declared. Should it be static?
arch/riscv/kernel/traps.c:104:1: warning: symbol 'do_trap_store_misaligned' was not declared. Should it be static?
arch/riscv/kernel/traps.c:106:1: warning: symbol 'do_trap_store_fault' was not declared. Should it be static?
arch/riscv/kernel/traps.c:108:1: warning: symbol 'do_trap_ecall_u' was not declared. Should it be static?
arch/riscv/kernel/traps.c:110:1: warning: symbol 'do_trap_ecall_s' was not declared. Should it be static?
arch/riscv/kernel/traps.c:112:1: warning: symbol 'do_trap_ecall_m' was not declared. Should it be static?
arch/riscv/kernel/traps.c:124:17: warning: symbol 'do_trap_break' was not declared. Should it be static?
arch/riscv/kernel/smpboot.c:136:24: warning: symbol 'smp_callin' was not declared. Should it be static?
Based on a suggestion from Luc Van Oostenryck.
This version includes changes based on feedback from Christoph Hellwig
<hch@lst.de>.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de> # for do_syscall_trace_*
The __user annotations were removed from the {save,restore}_fp_state()
function signatures by commit 007f5c3589 ("Refactor FPU code in
signal setup/return procedures"), but should be present, and sparse
warns when they are not applied. Add them back in.
This change should have no functional impact.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Fixes: 007f5c3589 ("Refactor FPU code in signal setup/return procedures")
Cc: Alan Kao <alankao@andestech.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
sparse identifies several missing prototypes caused by missing
preprocessor include directives:
arch/riscv/kernel/cpufeature.c:16:6: warning: symbol 'has_fpu' was not declared. Should it be static?
arch/riscv/kernel/process.c:26:6: warning: symbol 'arch_cpu_idle' was not declared. Should it be static?
arch/riscv/kernel/reset.c:15:6: warning: symbol 'pm_power_off' was not declared. Should it be static?
arch/riscv/kernel/syscall_table.c:15:6: warning: symbol 'sys_call_table' was not declared. Should it be static?
arch/riscv/kernel/traps.c:149:13: warning: symbol 'trap_init' was not declared. Should it be static?
arch/riscv/kernel/vdso.c:54:5: warning: symbol 'arch_setup_additional_pages' was not declared. Should it be static?
arch/riscv/kernel/smp.c:64:6: warning: symbol 'arch_match_cpu_phys_id' was not declared. Should it be static?
arch/riscv/kernel/module-sections.c:89:5: warning: symbol 'module_frob_arch_sections' was not declared. Should it be static?
arch/riscv/mm/context.c:42:6: warning: symbol 'switch_mm' was not declared. Should it be static?
Fix by including the appropriate header files in the appropriate
source files.
This patch should have no functional impact.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Several functions and arrays which are only used in the files in which
they are declared are missing "static" qualifiers. Warnings for these
symbols are reported by sparse:
arch/riscv/kernel/vdso.c:28:18: warning: symbol 'vdso_data' was not declared. Should it be static?
arch/riscv/mm/sifive_l2_cache.c:145:12: warning: symbol 'sifive_l2_init' was not declared. Should it be static?
Resolve these warnings by marking them as static.
This version incorporates feedback from Greentime Hu
<greentime.hu@sifive.com>.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Greentime Hu <greentime.hu@sifive.com>
Add prototypes for assembly language functions defined in head.S,
and include these prototypes into C source files that call those
functions.
This patch resolves the following warnings from sparse:
arch/riscv/kernel/setup.c:39:10: warning: symbol 'hart_lottery' was not declared. Should it be static?
arch/riscv/kernel/setup.c:42:13: warning: symbol 'parse_dtb' was not declared. Should it be static?
arch/riscv/kernel/smpboot.c:33:6: warning: symbol '__cpu_up_stack_pointer' was not declared. Should it be static?
arch/riscv/kernel/smpboot.c:34:6: warning: symbol '__cpu_up_task_pointer' was not declared. Should it be static?
arch/riscv/mm/fault.c:25:17: warning: symbol 'do_page_fault' was not declared. Should it be static?
This change should have no functional impact.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
If we always compile the get_break_insn_length inline function we can
remove the ifdefs and let dead code elimination take care of the warn
branch that is now unreadable because the report_bug stub always
returns BUG_TRAP_TYPE_BUG.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
As said in commit f2c2cbcc35 ("powerpc: Use pr_warn instead of
pr_warning"), removing pr_warning so all logging messages use a
consistent <prefix>_warn style. Let's do it.
Link: http://lkml.kernel.org/r/20191018031850.48498-4-wangkefeng.wang@huawei.com
To: linux-kernel@vger.kernel.org
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Since the enabling and disabling of IRQs within preempt_schedule_irq()
is contained in a need_resched() loop, we don't need the outer arch
code loop.
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: linux-riscv@lists.infradead.org
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
For the kernel space, all ebreak instructions are determined at compile
time because the kernel space debugging module is currently unsupported.
Hence, it should be treated as a bug if an ebreak instruction which does
not belong to BUG_TRAP_TYPE_WARN or BUG_TRAP_TYPE_BUG is executed in
kernel space. For the userspace, debugging module or user problem may
intentionally insert an ebreak instruction to trigger a SIGTRAP signal.
To approach the above two situations, the do_trap_break() will direct
the BUG_TRAP_TYPE_NONE ebreak exception issued in kernel space to die()
and will send a SIGTRAP to the trapped process only when the ebreak is
in userspace.
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[paul.walmsley@sifive.com: fixed checkpatch issue]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
On RISC-V, when the kernel runs code on behalf of a user thread, and the
kernel executes a WARN() or WARN_ON(), the user thread will be sent
a bogus SIGTRAP. Fix the RISC-V kernel code to not send a SIGTRAP when
a WARN()/WARN_ON() is executed.
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[paul.walmsley@sifive.com: fixed subject]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
When the CONFIG_GENERIC_BUG is disabled by disabling CONFIG_BUG, if a
kernel thread is trapped by BUG(), the whole system will be in the
loop that infinitely handles the ebreak exception instead of entering the
die function. To fix this problem, the do_trap_break() will always call
the die() to deal with the break exception as the type of break is
BUG_TRAP_TYPE_BUG.
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
This is almost entirely a comment. The bug is unlikely to manifest on
existing hardware because there is a timeout on load reservations, but
manifests on QEMU because there is no timeout.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
When the handle_exception function addresses an exception, the interrupts
will be unconditionally enabled after finishing the context save. However,
It may erroneously enable the interrupts if the interrupts are disabled
before entering the handle_exception.
For example, one of the WARN_ON() condition is satisfied in the scheduling
where the interrupt is disabled and rq.lock is locked. The WARN_ON will
trigger a break exception and the handle_exception function will enable the
interrupts before entering do_trap_break function. During the procedure, if
a timer interrupt is pending, it will be taken when interrupts are enabled.
In this case, it may cause a deadlock problem if the rq.lock is locked
again in the timer ISR.
Hence, the handle_exception() can only enable interrupts when the state of
sstatus.SPIE is 1.
This patch is tested on HiFive Unleashed board.
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
[paul.walmsley@sifive.com: updated to apply]
Fixes: bcae803a21 ("RISC-V: Enable IRQ during exception handling")
Cc: David Abdurachmanov <david.abdurachmanov@sifive.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Export a few symbols used by kvm module. Without this, kvm cannot
be compiled as a module.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
[paul.walmsley@sifive.com: updated to apply; clarified short patch
description]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Harts with id greater than or equal to CONFIG_NR_CPUS need to be
disabled. But the kernel can pick any hart as the main hart. So,
before picking the main hart, the kernel must disable harts with ids
greater than or equal to CONFIG_NR_CPUS.
Signed-off-by: Xiang Wang <merle@hardenedlinux.org>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
[paul.walmsley@sifive.com: updated to apply; cleaned up patch
description]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Add the following new features:
- Generic CPU topology description support for DT-based platforms,
including ARM64, ARM and RISC-V.
- Sparsemem support
- Perf callchain support
- SiFive PLIC irqchip modifications, in preparation for M-mode Linux
and clean up the code base:
- Clean up chip-specific register (CSR) manipulation code, IPIs, TLB
flushing, and the RISC-V CPU-local timer code
- Kbuild cleanup from one of the Kbuild maintainers
-----BEGIN PGP SIGNATURE-----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=N9WW
-----END PGP SIGNATURE-----
Merge tag 'riscv/for-v5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Paul Walmsley:
"Add the following new features:
- Generic CPU topology description support for DT-based platforms,
including ARM64, ARM and RISC-V.
- Sparsemem support
- Perf callchain support
- SiFive PLIC irqchip modifications, in preparation for M-mode Linux
and clean up the code base:
- Clean up chip-specific register (CSR) manipulation code, IPIs, TLB
flushing, and the RISC-V CPU-local timer code
- Kbuild cleanup from one of the Kbuild maintainers"
[ The CPU topology parts came in through the arm64 tree with a shared
branch - Linus ]
* tag 'riscv/for-v5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
irqchip/sifive-plic: set max threshold for ignored handlers
riscv: move the TLB flush logic out of line
riscv: don't use the rdtime(h) pseudo-instructions
riscv: cleanup riscv_cpuid_to_hartid_mask
riscv: optimize send_ipi_single
riscv: cleanup send_ipi_mask
riscv: refactor the IPI code
riscv: Add support for libdw
riscv: Add support for perf registers sampling
riscv: Add perf callchain support
riscv: add arch/riscv/Kbuild
RISC-V: Implement sparsemem
riscv: Using CSR numbers to access CSRs
- 52-bit virtual addressing in the kernel
- New ABI to allow tagged user pointers to be dereferenced by syscalls
- Early RNG seeding by the bootloader
- Improve robustness of SMP boot
- Fix TLB invalidation in light of recent architectural clarifications
- Support for i.MX8 DDR PMU
- Remove direct LSE instruction patching in favour of static keys
- Function error injection using kprobes
- Support for the PPTT "thread" flag introduced by ACPI 6.3
- Move PSCI idle code into proper cpuidle driver
- Relaxation of implicit I/O memory barriers
- Build with RELR relocations when toolchain supports them
- Numerous cleanups and non-critical fixes
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl1yYREQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNAM3CAChqDFQkryXoHwdeEcaukMRVNxtxOi4pM4g
5xqkb7PoqRJssIblsuhaXjrSD97yWCgaqCmFe6rKoes++lP4bFcTe22KXPPyPBED
A+tK4nTuKKcZfVbEanUjI+ihXaHJmKZ/kwAxWsEBYZ4WCOe3voCiJVNO2fHxqg1M
8TskZ2BoayTbWMXih0eJg2MCy/xApBq4b3nZG4bKI7Z9UpXiKN1NYtDh98ZEBK4V
d/oNoHsJ2ZvIQsztoBJMsvr09DTCazCijWZiECadm6l41WEPFizngrACiSJLLtYo
0qu4qxgg9zgFlvBCRQmIYSggTuv35RgXSfcOwChmW5DUjHG+f9GK
=Ru4B
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"Although there isn't tonnes of code in terms of line count, there are
a fair few headline features which I've noted both in the tag and also
in the merge commits when I pulled everything together.
The part I'm most pleased with is that we had 35 contributors this
time around, which feels like a big jump from the usual small group of
core arm64 arch developers. Hopefully they all enjoyed it so much that
they'll continue to contribute, but we'll see.
It's probably worth highlighting that we've pulled in a branch from
the risc-v folks which moves our CPU topology code out to where it can
be shared with others.
Summary:
- 52-bit virtual addressing in the kernel
- New ABI to allow tagged user pointers to be dereferenced by
syscalls
- Early RNG seeding by the bootloader
- Improve robustness of SMP boot
- Fix TLB invalidation in light of recent architectural
clarifications
- Support for i.MX8 DDR PMU
- Remove direct LSE instruction patching in favour of static keys
- Function error injection using kprobes
- Support for the PPTT "thread" flag introduced by ACPI 6.3
- Move PSCI idle code into proper cpuidle driver
- Relaxation of implicit I/O memory barriers
- Build with RELR relocations when toolchain supports them
- Numerous cleanups and non-critical fixes"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (114 commits)
arm64: remove __iounmap
arm64: atomics: Use K constraint when toolchain appears to support it
arm64: atomics: Undefine internal macros after use
arm64: lse: Make ARM64_LSE_ATOMICS depend on JUMP_LABEL
arm64: asm: Kill 'asm/atomic_arch.h'
arm64: lse: Remove unused 'alt_lse' assembly macro
arm64: atomics: Remove atomic_ll_sc compilation unit
arm64: avoid using hard-coded registers for LSE atomics
arm64: atomics: avoid out-of-line ll/sc atomics
arm64: Use correct ll/sc atomic constraints
jump_label: Don't warn on __exit jump entries
docs/perf: Add documentation for the i.MX8 DDR PMU
perf/imx_ddr: Add support for AXI ID filtering
arm64: kpti: ensure patched kernel text is fetched from PoU
arm64: fix fixmap copy for 16K pages and 48-bit VA
perf/smmuv3: Validate groups for global filtering
perf/smmuv3: Validate group size
arm64: Relax Documentation/arm64/tagged-pointers.rst
arm64: kvm: Replace hardcoded '1' with SYS_PAR_EL1_F
arm64: mm: Ignore spurious translation faults taken from the kernel
...
Part of the intention during the definition of the RISC-V kernel image
header was to lay the groundwork for a future merge with the ARM64
image header. One error during my original review was not noticing
that the RISC-V header's "magic" field was at a different size and
position than the ARM64's "magic" field. If the existing ARM64 Image
header parsing code were to attempt to parse an existing RISC-V kernel
image header format, it would see a magic number 0. This is
undesirable, since it's our intention to align as closely as possible
with the ARM64 header format. Another problem was that the original
"res3" field was not being initialized correctly to zero.
Address these issues by creating a 32-bit "magic2" field in the RISC-V
header which matches the ARM64 "magic" field. RISC-V binaries will
store "RSC\x05" in this field. The intention is that the use of the
existing 64-bit "magic" field in the RISC-V header will be deprecated
over time. Increment the minor version number of the file format to
indicate this change, and update the documentation accordingly. Fix
the assembler directives in head.S to ensure that reserved fields are
properly zero-initialized.
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Reported-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Cc: Atish Patra <atish.patra@wdc.com>
Cc: Karsten Merker <merker@debian.org>
Link: https://lore.kernel.org/linux-riscv/194c2f10c9806720623430dbf0cc59a965e50448.camel@wdc.com/T/#u
Link: https://lore.kernel.org/linux-riscv/mhng-755b14c4-8f35-4079-a7ff-e421fd1b02bc@palmer-si-x1e/T/#t
Move the initial clearing of the mask from the callers to
riscv_cpuid_to_hartid_mask, and remove the unused !CONFIG_SMP stub.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Don't go through send_ipi_mask, but just set the op bit and then pass
a simple generated hartid mask directly to sbi_send_ipi.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
[paul.walmsley@sifive.com: minor patch description fixes]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Use the special barriers for atomic bitops to make the intention
a little more clear, and use riscv_cpuid_to_hartid_mask instead of
open coding it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
This prepares for adding native non-SBI IPI code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
This patch implements the perf registers sampling and validation API
for the riscv arch. The valid registers and their register ID are
defined in perf_regs.h. Perf tool can backtrace in userspace with
unwind library and the registers/user stack dump support.
Signed-off-by: Mao Han <han_mao@c-sky.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: linux-riscv <linux-riscv@lists.infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Guo Ren <guoren@kernel.org>
Tested-by: Greentime Hu <greentime.hu@sifive.com>
[paul.walmsley@sifive.com: minor patch description fix]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
This patch add support for perf callchain sampling on riscv platforms.
The return address of leaf function is retrieved from pt_regs as
it is not saved in the outmost frame.
Signed-off-by: Mao Han <han_mao@c-sky.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: linux-riscv <linux-riscv@lists.infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Guo Ren <guoren@kernel.org>
Tested-by: Greentime Hu <greentime.hu@sifive.com>
[paul.walmsley@sifive.com: fixed some 'checkpatch.pl --strict' issues;
fixed patch description spelling]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Since commit a3182c91ef ("RISC-V: Access CSRs using CSR numbers"),
we should prefer accessing CSRs using their CSR numbers, but there
are several leftovers like sstatus / sptbr we missed.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
The following two reasons cause FP registers are sometimes not
initialized before starting the user program.
1. Currently, the FP context is initialized in flush_thread() function
and we expect these initial values to be restored to FP register when
doing FP context switch. However, the FP context switch only occurs in
switch_to function. Hence, if this process does not be scheduled out
and scheduled in before entering the user space, the FP registers
have no chance to initialize.
2. In flush_thread(), the state of reg->sstatus.FS inherits from the
parent. Hence, the state of reg->sstatus.FS may be dirty. If this
process is scheduled out during flush_thread() and initializing the
FP register, the fstate_save() in switch_to will corrupt the FP context
which has been initialized until flush_thread().
To solve the 1st case, the initialization of the FP register will be
completed in start_thread(). It makes sure all FP registers are initialized
before starting the user program. For the 2nd case, the state of
reg->sstatus.FS in start_thread will be set to SR_FS_OFF to prevent this
process from corrupting FP context in doing context save. The FP state is
set to SR_FS_INITIAL in start_trhead().
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Fixes: 7db91e57a0 ("RISC-V: Task implementation")
Cc: stable@vger.kernel.org
[paul.walmsley@sifive.com: fixed brace alignment issue reported by
checkpatch]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Pull in generic CPU topology changes from Paul Walmsley (RISC-V).
* tag 'common/for-v5.4-rc1/cpu-topology' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
MAINTAINERS: Add an entry for generic architecture topology
base: arch_topology: update Kconfig help description
RISC-V: Parse cpu topology during boot.
arm: Use common cpu_topology structure and functions.
cpu-topology: Move cpu topology code to common code.
dt-binding: cpu-topology: Move cpu-map to a common binding.
Documentation: DT: arm: add support for sockets defining package boundaries
This patch fix following perf record error by linking vdso.so with
build id.
perf.data perf.data.old
[ perf record: Woken up 1 times to write data ]
free(): double free detected in tcache 2
Aborted
perf record use filename__read_build_id(util/symbol-minimal.c) to get
build id when libelf is not supported. When vdso.so is linked without
build id, the section size of PT_NOTE will be zero, buf size will
realloc to zero and cause memory corruption.
Signed-off-by: Mao Han <han_mao@c-sky.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Currently, there are no topology defined for RISC-V.
Parse the cpu-map node from device tree and setup the
cpu topology.
CPU topology after applying the patch.
$cat /sys/devices/system/cpu/cpu2/topology/core_siblings_list
0-3
$cat /sys/devices/system/cpu/cpu3/topology/core_siblings_list
0-3
$cat /sys/devices/system/cpu/cpu3/topology/physical_package_id
0
$cat /sys/devices/system/cpu/cpu3/topology/core_id
3
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
- Hugepage support
- "Image" header support for RISC-V kernel binaries, compatible with
the current ARM64 "Image" header
- Initial page table setup now split into two stages
- CONFIG_SOC support (starting with SiFive SoCs)
- Avoid reserving memory between RAM start and the kernel in setup_bootmem()
- Enable high-res timers and dynamic tick in the RV64 defconfig
- Remove long-deprecated gate area stubs
- MAINTAINERS updates to switch to the newly-created shared RISC-V git
tree, and to fix a get_maintainers.pl issue for patches involving
SiFive E-mail addresses
Also, one integration fix to resolve a build problem introduced during
in the v5.3-rc1 merge window:
- Fix build break after macro-to-function conversion in
asm-generic/cacheflush.h
-----BEGIN PGP SIGNATURE-----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=SVSp
-----END PGP SIGNATURE-----
Merge tag 'riscv/for-v5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Paul Walmsley:
- Hugepage support
- "Image" header support for RISC-V kernel binaries, compatible with
the current ARM64 "Image" header
- Initial page table setup now split into two stages
- CONFIG_SOC support (starting with SiFive SoCs)
- Avoid reserving memory between RAM start and the kernel in
setup_bootmem()
- Enable high-res timers and dynamic tick in the RV64 defconfig
- Remove long-deprecated gate area stubs
- MAINTAINERS updates to switch to the newly-created shared RISC-V git
tree, and to fix a get_maintainers.pl issue for patches involving
SiFive E-mail addresses
Also, one integration fix to resolve a build problem introduced during
in the v5.3-rc1 merge window:
- Fix build break after macro-to-function conversion in
asm-generic/cacheflush.h
* tag 'riscv/for-v5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: fix build break after macro-to-function conversion in generic cacheflush.h
RISC-V: Add an Image header that boot loader can parse.
RISC-V: Setup initial page tables in two stages
riscv: remove free_initrd_mem
riscv: ccache: Remove unused variable
riscv: Introduce huge page support for 32/64bit kernel
x86, arm64: Move ARCH_WANT_HUGE_PMD_SHARE config in arch/Kconfig
RISC-V: Fix memory reservation in setup_bootmem()
riscv: defconfig: enable SOC_SIFIVE
riscv: select SiFive platform drivers with SOC_SIFIVE
arch: riscv: add config option for building SiFive's SoC resource
riscv: Remove gate area stubs
MAINTAINERS: change the arch/riscv git tree to the new shared tree
MAINTAINERS: don't automatically patches involving SiFive to the linux-riscv list
RISC-V: defconfig: Enable NO_HZ_IDLE and HIGH_RES_TIMERS
Currently, the last stage boot loaders such as U-Boot can accept only
uImage which is an unnecessary additional step in automating boot
process.
Add an image header that boot loader understands and boot Linux from
flat Image directly.
This header is based on ARM64 boot image header and provides an
opportunity to combine both ARM64 & RISC-V image headers in future.
Also make sure that PE/COFF header can co-exist in the same image so
that EFI stub can be supported for RISC-V in future. EFI specification
needs PE/COFF image header in the beginning of the kernel image in order
to load it as an EFI application. In order to support EFI stub, code0
should be replaced with "MZ" magic string and res4(at offset 0x3c)
should point to the rest of the PE/COFF header (which will be added
during EFI support).
Tested on both QEMU and HiFive Unleashed using OpenSBI + U-Boot + Linux.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Karsten Merker <merker@debian.org>
Tested-by: Karsten Merker <merker@debian.org> (QEMU+OpenSBI+U-Boot)
Tested-by: Kevin Hilman <khilman@baylibre.com> (OpenSBI + U-Boot + Linux)
[paul.walmsley@sifive.com: fixed whitespace in boot-image-header.txt;
converted structure comment to kernel-doc format and added some detail]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Currently, the setup_vm() does initial page table setup in one-shot
very early before enabling MMU. Due to this, the setup_vm() has to map
all possible kernel virtual addresses since it does not know size and
location of RAM. This means we have kernel mappings for non-existent
RAM and any buggy driver (or kernel) code doing out-of-bound access
to RAM will not fault and cause underterministic behaviour.
Further, the setup_vm() creates PMD mappings (i.e. 2M mappings) for
RV64 systems. This means for PAGE_OFFSET=0xffffffe000000000 (i.e.
MAXPHYSMEM_128GB=y), the setup_vm() will require 129 pages (i.e.
516 KB) of memory for initial page tables which is never freed. The
memory required for initial page tables will further increase if
we chose a lower value of PAGE_OFFSET (e.g. 0xffffff0000000000)
This patch implements two-staged initial page table setup, as follows:
1. Early (i.e. setup_vm()): This stage maps kernel image and DTB in
a early page table (i.e. early_pg_dir). The early_pg_dir will be used
only by boot HART so it can be freed as-part of init memory free-up.
2. Final (i.e. setup_vm_final()): This stage maps all possible RAM
banks in the final page table (i.e. swapper_pg_dir). The boot HART
will start using swapper_pg_dir at the end of setup_vm_final(). All
non-boot HARTs directly use the swapper_pg_dir created by boot HART.
We have following advantages with this new approach:
1. Kernel mappings for non-existent RAM don't exists anymore.
2. Memory consumed by initial page tables is now indpendent of the
chosen PAGE_OFFSET.
3. Memory consumed by initial page tables on RV64 system is 2 pages
(i.e. 8 KB) which has significantly reduced and these pages will be
freed as-part of the init memory free-up.
The patch also provides a foundation for implementing strict kernel
mappings where we protect kernel text and rodata using PTE permissions.
Suggested-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
[paul.walmsley@sifive.com: updated to apply; fixed a checkpatch warning]
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Pull force_sig() argument change from Eric Biederman:
"A source of error over the years has been that force_sig has taken a
task parameter when it is only safe to use force_sig with the current
task.
The force_sig function is built for delivering synchronous signals
such as SIGSEGV where the userspace application caused a synchronous
fault (such as a page fault) and the kernel responded with a signal.
Because the name force_sig does not make this clear, and because the
force_sig takes a task parameter the function force_sig has been
abused for sending other kinds of signals over the years. Slowly those
have been fixed when the oopses have been tracked down.
This set of changes fixes the remaining abusers of force_sig and
carefully rips out the task parameter from force_sig and friends
making this kind of error almost impossible in the future"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (27 commits)
signal/x86: Move tsk inside of CONFIG_MEMORY_FAILURE in do_sigbus
signal: Remove the signal number and task parameters from force_sig_info
signal: Factor force_sig_info_to_task out of force_sig_info
signal: Generate the siginfo in force_sig
signal: Move the computation of force into send_signal and correct it.
signal: Properly set TRACE_SIGNAL_LOSE_INFO in __send_signal
signal: Remove the task parameter from force_sig_fault
signal: Use force_sig_fault_to_task for the two calls that don't deliver to current
signal: Explicitly call force_sig_fault on current
signal/unicore32: Remove tsk parameter from __do_user_fault
signal/arm: Remove tsk parameter from __do_user_fault
signal/arm: Remove tsk parameter from ptrace_break
signal/nds32: Remove tsk parameter from send_sigtrap
signal/riscv: Remove tsk parameter from do_trap
signal/sh: Remove tsk parameter from force_sig_info_fault
signal/um: Remove task parameter from send_sigtrap
signal/x86: Remove task parameter from send_sigtrap
signal: Remove task parameter from force_sig_mceerr
signal: Remove task parameter from force_sig
signal: Remove task parameter from force_sigsegv
...
Since commit a6c19dfe39 ("arm64,ia64,ppc,s390,sh,tile,um,x86,mm:
remove default gate area"), which predates riscv's inclusion in
Linux by almost three years, the default behavior wrt the gate area
is sane. Remove riscv's gate area stubs.
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: linux-riscv@lists.infradead.org
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Another round of SPDX updates for 5.2-rc6
Here is what I am guessing is going to be the last "big" SPDX update for
5.2. It contains all of the remaining GPLv2 and GPLv2+ updates that
were "easy" to determine by pattern matching. The ones after this are
going to be a bit more difficult and the people on the spdx list will be
discussing them on a case-by-case basis now.
Another 5000+ files are fixed up, so our overall totals are:
Files checked: 64545
Files with SPDX: 45529
Compared to the 5.1 kernel which was:
Files checked: 63848
Files with SPDX: 22576
This is a huge improvement.
Also, we deleted another 20000 lines of boilerplate license crud, always
nice to see in a diffstat.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXQyQYA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymnGQCghETUBotn1p3hTjY56VEs6dGzpHMAnRT0m+lv
kbsjBGEJpLbMRB2krnaU
=RMcT
-----END PGP SIGNATURE-----
Merge tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx
Pull still more SPDX updates from Greg KH:
"Another round of SPDX updates for 5.2-rc6
Here is what I am guessing is going to be the last "big" SPDX update
for 5.2. It contains all of the remaining GPLv2 and GPLv2+ updates
that were "easy" to determine by pattern matching. The ones after this
are going to be a bit more difficult and the people on the spdx list
will be discussing them on a case-by-case basis now.
Another 5000+ files are fixed up, so our overall totals are:
Files checked: 64545
Files with SPDX: 45529
Compared to the 5.1 kernel which was:
Files checked: 63848
Files with SPDX: 22576
This is a huge improvement.
Also, we deleted another 20000 lines of boilerplate license crud,
always nice to see in a diffstat"
* tag 'spdx-5.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (65 commits)
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 507
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 506
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 505
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 504
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 503
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 502
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 501
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 499
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 498
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 497
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 496
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 495
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 491
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 490
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 489
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 488
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 487
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 486
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 485
...
Based on 2 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation #
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 4122 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not see http www gnu org
licenses
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 503 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This tag contains fixes, defconfig, and DT data changes for the v5.2-rc
series. The fixes are relatively straightforward:
- Addition of a TLB fence in the vmalloc_fault path, so the CPU doesn't
enter an infinite page fault loop;
- Readdition of the pm_power_off export, so device drivers that
reassign it can now be built as modules;
- A udelay() fix for RV32, fixing a miscomputation of the delay time;
- Removal of deprecated smp_mb__*() barriers.
The tag also adds initial DT data infrastructure for arch/riscv, along
with initial data for the SiFive FU540-C000 SoC and the corresponding
HiFive Unleashed board.
We also update the RV64 defconfig to include some core drivers for the
FU540 in the build.
-----BEGIN PGP SIGNATURE-----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=aotJ
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-v5.2/fixes-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
"This contains fixes, defconfig, and DT data changes for the v5.2-rc
series.
The fixes are relatively straightforward:
- Addition of a TLB fence in the vmalloc_fault path, so the CPU
doesn't enter an infinite page fault loop
- Readdition of the pm_power_off export, so device drivers that
reassign it can now be built as modules
- A udelay() fix for RV32, fixing a miscomputation of the delay time
- Removal of deprecated smp_mb__*() barriers
This also adds initial DT data infrastructure for arch/riscv, along
with initial data for the SiFive FU540-C000 SoC and the corresponding
HiFive Unleashed board.
We also update the RV64 defconfig to include some core drivers for the
FU540 in the build"
* tag 'riscv-for-v5.2/fixes-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: remove unused barrier defines
riscv: mm: synchronize MMU after pte change
riscv: dts: add initial board data for the SiFive HiFive Unleashed
riscv: dts: add initial support for the SiFive FU540-C000 SoC
dt-bindings: riscv: convert cpu binding to json-schema
dt-bindings: riscv: sifive: add YAML documentation for the SiFive FU540
arch: riscv: add support for building DTB files from DT source data
riscv: Fix udelay in RV32.
riscv: export pm_power_off again
RISC-V: defconfig: enable clocks, serial console
Commit bf0102a0fd ("riscv: call pm_power_off from machine_halt /
machine_power_off") removed the export of pm_power_off, but it is used by
several modules:
ERROR: "pm_power_off" [drivers/mfd/rk808.ko] undefined!
ERROR: "pm_power_off" [drivers/mfd/max8907.ko] undefined!
ERROR: "pm_power_off" [drivers/mfd/axp20x.ko] undefined!
ERROR: "pm_power_off" [drivers/char/ipmi/ipmi_poweroff.ko] undefined!
Signed-off-by: Andreas Schwab <schwab@suse.de>
Fixes: bf0102a0fd ("riscv: call pm_power_off from machine_halt / machine_power_off")
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation version 2 this program is distributed
in the hope that it will be useful but without any warranty without
even the implied warranty of merchantability or fitness for a
particular purpose see the gnu general public license for more
details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 97 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141901.025053186@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license version 2 as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 655 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070034.575739538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Based on 3 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [kishon] [vijay] [abraham]
[i] [kishon]@[ti] [com] this program is distributed in the hope that
it will be useful but without any warranty without even the implied
warranty of merchantability or fitness for a particular purpose see
the gnu general public license for more details
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version [author] [graeme] [gregory]
[gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i]
[kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema]
[hk] [hemahk]@[ti] [com] this program is distributed in the hope
that it will be useful but without any warranty without even the
implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 1105 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As synchronous exceptions really only make sense against the current
task (otherwise how are you synchronous) remove the task parameter
from from force_sig_fault to make it explicit that is what is going
on.
The two known exceptions that deliver a synchronous exception to a
stopped ptraced task have already been changed to
force_sig_fault_to_task.
The callers have been changed with the following emacs regular expression
(with obvious variations on the architectures that take more arguments)
to avoid typos:
force_sig_fault[(]\([^,]+\)[,]\([^,]+\)[,]\([^,]+\)[,]\W+current[)]
->
force_sig_fault(\1,\2,\3)
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Update the calls of force_sig_fault that pass in a variable that is
set to current earlier to explicitly use current.
This is to make the next change that removes the task parameter
from force_sig_fault easier to verify.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
The do_trap function is always called with tsk == current.
Make that obvious by removing the tsk parameter.
This also makes it clear that do_trap calls force_sig_fault
on the current task.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
All of the remaining callers pass current into force_sig so
remove the task parameter to make this obvious and to make
misuse more difficult in the future.
This also makes it clear force_sig passes current into force_sig_info.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this program is distributed in the
hope that it will be useful but without any warranty without even
the implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not see the file copying or write to the free
software foundation inc
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 12 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190523091651.231300438@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch set contains an assortment of RISC-V related patches that I'd
like to target for the 5.2 merge window. Most of the patches are
cleanups, but there are a handful of user-visible changes:
* The nosmp and nr_cpus command-line arguments are now supported, which
work like normal.
* The SBI console no longer installs itself as a preferred console, we
rely on standard mechanisms (/chosen, command-line, hueristics)
instead.
* sfence_remove_sfence_vma{,_asid} now pass their arguments along to the
SBI call.
* Modules now support BUG().
* A missing sfence.vma during boot has been added. This bug only
manifests during boot.
* The arch/riscv support for SiFive's L2 cache controller has been
merged, which should un-block the EDAC framework work.
I've only tested this on QEMU again, as I didn't have time to get things
running on the Unleashed. The latest master from this morning merges in
cleanly and passes the tests as well.
This patch set rebased my "5.2 MW, Part 1" patch set which includes an
erronous empty file. It's also a rebase of my "5.2 MW, Part 2" patch
set, in which I managed to create another file while attempting to
remove the empty file.
Sorry for all the noise!
-----BEGIN PGP SIGNATURE-----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=mZwx
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.2-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux
Pull RISC-V updates from Palmer Dabbelt:
"This contains an assortment of RISC-V related patches that I'd like to
target for the 5.2 merge window. Most of the patches are cleanups, but
there are a handful of user-visible changes:
- The nosmp and nr_cpus command-line arguments are now supported,
which work like normal.
- The SBI console no longer installs itself as a preferred console,
we rely on standard mechanisms (/chosen, command-line, hueristics)
instead.
- sfence_remove_sfence_vma{,_asid} now pass their arguments along to
the SBI call.
- Modules now support BUG().
- A missing sfence.vma during boot has been added. This bug only
manifests during boot.
- The arch/riscv support for SiFive's L2 cache controller has been
merged, which should un-block the EDAC framework work.
I've only tested this on QEMU again, as I didn't have time to get
things running on the Unleashed. The latest master from this morning
merges in cleanly and passes the tests as well"
* tag 'riscv-for-linus-5.2-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: (31 commits)
riscv: fix locking violation in page fault handler
RISC-V: sifive_l2_cache: Add L2 cache controller driver for SiFive SoCs
RISC-V: Add DT documentation for SiFive L2 Cache Controller
RISC-V: Avoid using invalid intermediate translations
riscv: Support BUG() in kernel module
riscv: Add the support for c.ebreak check in is_valid_bugaddr()
riscv: support trap-based WARN()
riscv: fix sbi_remote_sfence_vma{,_asid}.
riscv: move switch_mm to its own file
riscv: move flush_icache_{all,mm} to cacheflush.c
tty: Don't force RISCV SBI console as preferred console
RISC-V: Access CSRs using CSR numbers
RISC-V: Add interrupt related SCAUSE defines in asm/csr.h
RISC-V: Use tabs to align macro values in asm/csr.h
RISC-V: Fix minor checkpatch issues.
RISC-V: Support nr_cpus command line option.
RISC-V: Implement nosmp commandline option.
RISC-V: Add RISC-V specific arch_match_cpu_phys_id
riscv: vdso: drop unnecessary cc-ldoption
riscv: call pm_power_off from machine_halt / machine_power_off
...
The kernel module is loaded into vmalloc region which is located below
to the PAGE_OFFSET. Hence the condition, pc < PAGE_OFFSET, in the
is_valid_bugaddr() will filter out all trap exceptions triggered
by kernel module. To support BUG() in kernel module, the condition is
changed to pc < VMALLOC_START.
Signed-off-by: Vincent Chen <vincentc@andestech.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The macro __BUG_INSN currently is defined as the "ebreak" opcode.
The is_valid_bugaddr() function compares the instruction pointed to by
$sepc with macro __BUG_INSN to check whether the current trap exception
is caused by an "ebreak" instruction. However, this check flow is possibly
erroneous because if C extension is supported, the expected trap
instruction "ebreak" is possibly translated to "c.ebreak" by the assembler.
Therefore, it requires a mechanism to distinguish the length of the
instruction in $spec and compare it to the correct trap instruction.
Signed-off-by: Vincent Chen <vincentc@andestech.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Currently, flush_icache_all is macro-expanded into a SBI call, yet no
asm/sbi.h is included in asm/cacheflush.h. This could be moved to
mm/cacheflush.c instead (SBI call will dominate performance-wise and
there is no worry to not have it inlined.
Currently, flush_icache_mm stays in kernel/smp.c, which looks like a
hack to prevent it from being compiled when CONFIG_SMP=n. It should
also be in mm/cacheflush.c.
Signed-off-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
We should prefer accessing CSRs using their CSR numbers because:
1. It compiles fine with older toolchains.
2. We can use latest CSR names in #define macro names of CSR numbers
as-per RISC-V spec.
3. We can access newly added CSRs even if toolchain does not recognize
newly addes CSRs by name.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This patch adds SCAUSE interrupt flag and SCAUSE interrupt related
defines to asm/csr.h. We also use these defines in kernel/irq.c and
express SIE/SIP flags in-terms of SCAUSE interrupt causes.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
While working on the patches, I found some minor checkpatch issues.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
If nr_cpus command line option is set, maximum possible cpu should be
set to that value.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
nosmp command line option sets max_cpus to zero. No secondary harts
will boot if this is enabled. But present cpu mask will still point to
all possible masks.
Fix present cpu mask for nosmp usecase.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
OF/DT core has a hook for architecture specific logical cpuid to hartid
mapping. By implementing this, we can pass the logical cpu id to cpu
node parsing functions.
Fix the instances where logical cpuid is expected as an argument in
of_get_cpu_node.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Towards the goal of removing cc-ldoption, it seems that --hash-style=
was added to binutils 2.17.50.0.2 in 2006. The minimal required version
of binutils for the kernel according to
Documentation/process/changes.rst is 2.20.
Link: https://gcc.gnu.org/ml/gcc/2007-01/msg01141.html
Cc: clang-built-linux@googlegroups.com
Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This way any override of pm_power_off also affects the halt path and
we don't need additional infrastructure for it.
Also remove the pm_power_off export - at least for now we don't have
any modular drivers overriding it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This has been helpful when debugging my pending nommu port.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Nick Kossifidis <mick@ics.forth.gr>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
HAVE_FUNCTION_GRAPH_RET_ADDR_PTR is always defined for RISC-V.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
No need to pass the hartid, and the dtb address passed is a physical
address, so don't pretend it is a kernel pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
We don't need THREAD_SIZE in asm-offsets.c as we can just calculate
the value of init_thread_union + THREAD_SIZE using cpp, just like
we do a few lines above.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Just in case an old interrupt is pending make sure we clear everything
asserted before this kernel started. Based on similar M-mode code in
opensbi.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Nick Kossifidis <mick@ics.forth.gr>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The function of do_notify_resume called by entry.S could be entered
in loop when SIGPENDING was setted again before sret. So we must add
prevent code to make syscall restart (regs->sepc -= 0x4) or it may
re-execute unexpected instructions.
Just like in_syscall & forget_syscall used by arm.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Terminating the last trace entry with ULONG_MAX is a completely pointless
exercise and none of the consumers can rely on it because it's
inconsistently implemented across architectures. In fact quite some of the
callers remove the entry and adjust stack_trace.nr_entries afterwards.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: linux-riscv@lists.infradead.org
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Link: https://lkml.kernel.org/r/20190410103644.131061192@linutronix.de
IS_ENABLED should generally use CONFIG_ prefaced symbols and
it doesn't appear as if there is a CMODEL_MEDLOW define.
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The Linux RISC-V 32bit kernel is broken after we moved setup_vm() from
kernel/setup.c to mm/init.c because Linux RISC-V 32bit kernel by default
uses cmodel=medlow which results in a non-position-independent setup_vm().
This patch fixes Linux RISC-V 32bit kernel booting by:
1. Forcing cmodel=medany for mm/init.c
2. Moving remaing MM-related stuff va_pa_offset, pfn_base and
empty_zero_page from kernel/setup.c to mm/init.c
Further, the setup_vm() cannot handle GCC instrumentation for FTRACE so
we disable it for mm/init.c by not using "-pg" compiler flag.
Fixes: 6f1e9e946f ("RISC-V: Move setup_vm() to mm/init.c")
Suggested-by: Christoph Hellwig <hch@lst.de>
Suggested-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This contains the vast majority of the RISC-V patches for this merge
window. It includes:
* A handful of cleanups to our kernel prints, most of which are things I
should have caught the first time.
* We now provide an HWCAP that contains the ISA extensions that all
enabled processors support, as supposed to just looking at the first
enabled processor.
* We no longer spin forever waiting for all harts to boot.
* A fixmap implementation, which is coupled to some cleanups in our MM
code.
The only outstanding patches I know of right now are Vincent Chen's
patches to fix c.ebreak handling in the kernel, the v2 of which was
posted this morning. I'd like those in the MW, but I didn't want to
hold up everything else. The patch set is based on top of my last fixes
submission, but I've tested it with a conflict-free merge from v5.0.
I'm doing this rather than my "just go rebase everything" flow due to a
discussion with Linus, but if I misunderstood then just let me know and
I'll do something else. It's also the first time I've taken a PR into
my own tree, so let me know if I screwed that one up.
I've used my standard testing flow (QEMU in Fedora), but now that we're
starting to get the kernel in better shape I think it's time to impose
some more testing here -- specifically I'm going to require that patches
boot on the HiFive Unleashed because we're getting to the point where we
can actually expect that to work. I haven't done that for this tag, but
I'm going to do it for future ones.
I know the board is a bit expensive and not everyone has one, but if
I've sent you a free one and your patches break the boot then I'm going
to yell at you :). If you don't have one then please indicate how you
tested in your cover letter, and if you have a board then please add
your Tested-by to patches if they work for your testing flow.
-----BEGIN PGP SIGNATURE-----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=6gjG
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.1-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux
Pull RISC-V updates from Palmer Dabbelt:
"This contains the vast majority of the RISC-V patches for this merge
window. It includes:
- A handful of cleanups to our kernel prints, most of which are
things I should have caught the first time.
- We now provide an HWCAP that contains the ISA extensions that all
enabled processors support, as supposed to just looking at the
first enabled processor.
- We no longer spin forever waiting for all harts to boot.
- A fixmap implementation, which is coupled to some cleanups in our
MM code.
The only outstanding patches I know of right now are Vincent Chen's
patches to fix c.ebreak handling in the kernel, the v2 of which was
posted this morning. I'd like those in the MW, but I didn't want to
hold up everything else. The patch set is based on top of my last
fixes submission, but I've tested it with a conflict-free merge from
v5.0. I'm doing this rather than my "just go rebase everything" flow
due to a discussion with Linus, but if I misunderstood then just let
me know and I'll do something else. It's also the first time I've
taken a PR into my own tree, so let me know if I screwed that one up.
I've used my standard testing flow (QEMU in Fedora), but now that
we're starting to get the kernel in better shape I think it's time to
impose some more testing here -- specifically I'm going to require
that patches boot on the HiFive Unleashed because we're getting to the
point where we can actually expect that to work. I haven't done that
for this tag, but I'm going to do it for future ones.
I know the board is a bit expensive and not everyone has one, but if
I've sent you a free one and your patches break the boot then I'm
going to yell at you :). If you don't have one then please indicate
how you tested in your cover letter, and if you have a board then
please add your Tested-by to patches if they work for your testing
flow"
* tag 'riscv-for-linus-5.1-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
arch: riscv: fix logic error in parse_dtb
RISC-V: Assign hwcap as per comman capabilities.
RISC-V: Compare cpuid with NR_CPUS before mapping.
RISC-V: Allow hartid-to-cpuid function to fail.
RISC-V: Remove NR_CPUs check during hartid search from DT
RISC-V: Move cpuid to hartid mapping to SMP.
RISC-V: Do not wait indefinitely in __cpu_up
RISC-V: Free-up initrd in free_initrd_mem()
RISC-V: Implement compile-time fixed mappings
RISC-V: Move setup_vm() to mm/init.c
RISC-V: Move setup_bootmem() to mm/init.c
RISC-V: Setup init_mm before parse_early_param()
riscv: remove the HAVE_KPROBES option
riscv: use for_each_of_cpu_node iterator
riscv: treat cpu devicetree nodes without status as enabled
riscv: fix riscv_of_processor_hartid() comment
riscv: use pr_info and friends
riscv: add missing newlines to printk messages
Merge misc updates from Andrew Morton:
- a few misc things
- ocfs2 updates
- most of MM
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (159 commits)
tools/testing/selftests/proc/proc-self-syscall.c: remove duplicate include
proc: more robust bulk read test
proc: test /proc/*/maps, smaps, smaps_rollup, statm
proc: use seq_puts() everywhere
proc: read kernel cpu stat pointer once
proc: remove unused argument in proc_pid_lookup()
fs/proc/thread_self.c: code cleanup for proc_setup_thread_self()
fs/proc/self.c: code cleanup for proc_setup_self()
proc: return exit code 4 for skipped tests
mm,mremap: bail out earlier in mremap_to under map pressure
mm/sparse: fix a bad comparison
mm/memory.c: do_fault: avoid usage of stale vm_area_struct
writeback: fix inode cgroup switching comment
mm/huge_memory.c: fix "orig_pud" set but not used
mm/hotplug: fix an imbalance with DEBUG_PAGEALLOC
mm/memcontrol.c: fix bad line in comment
mm/cma.c: cma_declare_contiguous: correct err handling
mm/page_ext.c: fix an imbalance with kmemleak
mm/compaction: pass pgdat to too_many_isolated() instead of zone
mm: remove zone_lru_lock() function, access ->lru_lock directly
...
The VDSO is part of the kernel image and therefore the struct pages are
marked as reserved during boot.
As we install a special mapping, the actual struct pages will never be
exposed to MM via the page tables. We can therefore leave the pages
marked as reserved.
Link: http://lkml.kernel.org/r/20190114125903.24845-5-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Tobias Klauser <tklauser@distanz.ch>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull year 2038 updates from Thomas Gleixner:
"Another round of changes to make the kernel ready for 2038. After lots
of preparatory work this is the first set of syscalls which are 2038
safe:
403 clock_gettime64
404 clock_settime64
405 clock_adjtime64
406 clock_getres_time64
407 clock_nanosleep_time64
408 timer_gettime64
409 timer_settime64
410 timerfd_gettime64
411 timerfd_settime64
412 utimensat_time64
413 pselect6_time64
414 ppoll_time64
416 io_pgetevents_time64
417 recvmmsg_time64
418 mq_timedsend_time64
419 mq_timedreceiv_time64
420 semtimedop_time64
421 rt_sigtimedwait_time64
422 futex_time64
423 sched_rr_get_interval_time64
The syscall numbers are identical all over the architectures"
* 'timers-2038-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits)
riscv: Use latest system call ABI
checksyscalls: fix up mq_timedreceive and stat exceptions
unicore32: Fix __ARCH_WANT_STAT64 definition
asm-generic: Make time32 syscall numbers optional
asm-generic: Drop getrlimit and setrlimit syscalls from default list
32-bit userspace ABI: introduce ARCH_32BIT_OFF_T config option
compat ABI: use non-compat openat and open_by_handle_at variants
y2038: add 64-bit time_t syscalls to all 32-bit architectures
y2038: rename old time and utime syscalls
y2038: remove struct definition redirects
y2038: use time32 syscall names on 32-bit
syscalls: remove obsolete __IGNORE_ macros
y2038: syscalls: rename y2038 compat syscalls
x86/x32: use time64 versions of sigtimedwait and recvmmsg
timex: change syscalls to use struct __kernel_timex
timex: use __kernel_timex internally
sparc64: add custom adjtimex/clock_adjtime functions
time: fix sys_timer_settime prototype
time: Add struct __kernel_timex
time: make adjtime compat handling available for 32 bit
...
This patchset does:
1. Moves MM related code from kernel/setup.c to mm/init.c
2. Implements compile-time fixed mappings
Using fixed mappings, we get earlyprints even without SBI calls.
For example, we can now use kernel parameter
"earlycon=uart8250,mmio,0x10000000"
to get early prints on QEMU virt machine without using SBI calls.
The patchset is tested on QEMU virt machine.
Palmer: It looks like some of the code movement here conflicted with the
patches to move hartid handling around. As far as I can tell the only
changed code was in smp_setup_processor_id(), and I've kept the one in
smp.c.
The function early_init_dt_scan returns true if a DTB was detected.
Fixes: 8fd6e05c74 ("arch: riscv: support kernel command line forcing when no DTB passed")
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Paul Walmsley <paul.walmsley@sifive.com>
Tested-by: Paul Walmsley <paul.walmsley@sifive.com> # FU540 HiFive-U BBL
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Currently, we set hwcap based on first valid hart from DT. This may not
be correct always as that hart might not be current booting cpu or may
have a different capability.
Set hwcap as the capabilities supported by all possible harts with "okay"
status.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
We should never have a cpuid greater that NR_CPUS. Compare with NR_CPUS
before creating the mapping between logical and physical CPU ids. This
is also mandatory as NR_CPUS check is removed from
riscv_of_processor_hartid.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
It is perfectly okay to call riscv_hartid_to_cpuid for a hartid that is
not mapped with an CPU id. It can happen if the calling functions
retrieves the hartid from DT. However, that hartid was never brought
online by the firmware or kernel for any reasons.
No need to BUG() in the above case. A negative error return is
sufficient and the calling function should check for the return value
always.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
In non-smp configuration, hartid can be higher that NR_CPUS.
riscv_of_processor_hartid should not be compared to hartid to NR_CPUS in
that case. Moreover, this function checks all the DT properties of a
hart node. NR_CPUS comparison seems out of place.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Currently, logical CPU id to physical hartid mapping is defined for both
smp and non-smp configurations. This is not required as we need this
only for smp configuration. The mapping function can define directly
boot_cpu_hartid for non-smp use case.
The reverse mapping function i.e. hartid to cpuid can be called for any
valid but not booted harts. So it should return default cpu 0 only if it
is a boot hartid.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
In SMP path, __cpu_up waits for other CPU to come online indefinitely.
This is wrong as other CPU might be disabled in machine mode and
possible CPU is set to the cpus present in DT.
Introduce a completion variable and waits only for a second.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This is a follow-up to the y2038 syscall patches already merged in the tip
tree. As the final 32-bit RISC-V syscall ABI is still being decided on,
this is the last chance to make a few corrections to leave out interfaces
based on 32-bit time_t along with the old off_t and rlimit types.
The series achieves this in a few steps:
- A couple of bug fixes for minor regressions I introduced
in the original series
- A couple of older patches from Yury Norov that I had never
merged in the past, these fix up the openat/open_by_handle_at and
getrlimit/setrlimit syscalls to disallow the old versions of off_t
and rlimit.
- Hiding the deprecated system calls behind an #ifdef in
include/uapi/asm-generic/unistd.h
- Change arch/riscv to drop all these ABIs.
Originally, the plan was to also leave these out on C-Sky, but that now
has a glibc port that uses the older interfaces, so we need to leave
them in place.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=/iFA
-----END PGP SIGNATURE-----
Merge tag 'y2038-syscall-abi' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground into timers/2038
Pull additional syscall ABI cleanup for y2038 from Arnd Bergmann:
This is a follow-up to the y2038 syscall patches already merged in the tip
tree. As the final 32-bit RISC-V syscall ABI is still being decided on,
this is the last chance to make a few corrections to leave out interfaces
based on 32-bit time_t along with the old off_t and rlimit types.
The series achieves this in a few steps:
- A couple of bug fixes for minor regressions I introduced
in the original series
- A couple of older patches from Yury Norov that I had never
merged in the past, these fix up the openat/open_by_handle_at and
getrlimit/setrlimit syscalls to disallow the old versions of off_t
and rlimit.
- Hiding the deprecated system calls behind an #ifdef in
include/uapi/asm-generic/unistd.h
- Change arch/riscv to drop all these ABIs.
Originally, the plan was to also leave these out on C-Sky, but that now
has a glibc port that uses the older interfaces, so we need to leave
them in place.
We don't yet have an upstream glibc port for riscv, so there is no user
space for the existing ABI, and we can remove the definitions for 32-bit
time_t, off_t and struct resource and system calls based on them,
including the vdso.
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The setup_vm() is responsible for setting up initial page table hence
should be placed in mm/init.c.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
The setup_bootmem() mainly populates memblocks and does early memory
reservations. The right location for this function is mm/init.c. It
calls setup_initrd() so we move that as well.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
We should setup init_mm before doing parse_early_param() in setup_arch()
to be consistent with setup_arch() of other architectures such as x86,
ARM, and ARM64.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Use the new for_each_of_cpu_node() helper to iterate over cpu nodes
instead of open coding. Note that this will allow matching also on the
node name instead of the (for FDT) deprecated device_type property.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Follow the Linux convention and treat devicetree nodes without a status
property as enabled rather than disabled, while also allowing "ok" as a
shorthand for "okay".
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The riscv_of_processor_hartid() helper returns -ENODEV when the
specified node isn't an enabled and valid RISC-V hart node.
Also drop the unnecessary parenthesis around errno defines.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Use the pr_info and pr_err macros instead of printk with explicit log
levels.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Add missing newline characters to printk messages.
Also replace two pr_warning with the shorter pr_warn, and fix up the
tense of one error message while at it.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
At least BBL relies on the flat binaries containing all the bytes in the
actual image to exist in the file. Before this revert the flat images
dropped the trailing zeros, which caused BBL to put its copy of the
device tree where Linux thought the BSS was, which wreaks all sorts of
havoc. Manifesting the bug is a bit subtle because BBL aligns
everything to 2MiB page boundaries, but with large enough kernels you're
almost certain to get bitten by the bug.
While moving the sections around isn't a great long-term fix, it will at
least avoid producing broken images.
This reverts commit 22e6a2e14c.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
max_low_pfn should be pfn_size not byte_size.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Signed-off-by: Mao Han <mao_han@c-sky.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The cond_resched() can be used to yield the CPU resource if
CONFIG_PREEMPT is not defined. Otherwise, cond_resched() is a dummy
function. In order to avoid kernel thread occupying entire CPU,
when CONFIG_PREEMPT=y, the kernel thread needs to follow the
rescheduling mechanism like a user thread.
Signed-off-by: Vincent Chen <vincentc@andestech.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This is sort of a mix between a new feature and a bug fix. I've managed
to screw up merging this patch set a handful of times but I think it's
OK this time around. The main new feature here is audit support for
RISC-V, with some fixes to audit-related bugs that cropped up along the
way:
* The addition of NR_syscalls into unistd.h, which is necessary for
CONFIG_FTRACE_SYSCALLS.
* The definition of CREATE_TRACE_POINTS so
__tracepoint_sys_{enter,exit} get defined.
* A fix for trace_sys_exit() so we can enable
CONFIG_HAVE_SYSCALL_TRACEPOINTS.
Define CREATE_TRACE_POINTS in order to create functions and structures
for the trace events. This is needed if HAVE_SYSCALL_TRACEPOINTS and
CONFIG_FTRACE_SYSCALLS are enabled, otherwise we get linking errors:
[..]
MODPOST vmlinux.o
kernel/trace/trace_syscalls.o: In function `.L0 ':
trace_syscalls.c:(.text+0x1152): undefined reference to `__tracepoint_sys_enter'
trace_syscalls.c:(.text+0x126c): undefined reference to `__tracepoint_sys_enter'
trace_syscalls.c:(.text+0x1328): undefined reference to `__tracepoint_sys_enter'
trace_syscalls.c:(.text+0x14aa): undefined reference to `__tracepoint_sys_enter'
trace_syscalls.c:(.text+0x1684): undefined reference to `__tracepoint_sys_exit'
trace_syscalls.c:(.text+0x17a0): undefined reference to `__tracepoint_sys_exit'
trace_syscalls.c:(.text+0x185c): undefined reference to `__tracepoint_sys_exit'
trace_syscalls.c:(.text+0x19de): undefined reference to `__tracepoint_sys_exit'
arch/riscv/kernel/ptrace.o: In function `.L0 ':
ptrace.c:(.text+0x4dc): undefined reference to `__tracepoint_sys_enter'
ptrace.c:(.text+0x632): undefined reference to `__tracepoint_sys_exit'
make: *** [Makefile:1036: vmlinux] Error 1
Signed-off-by: David Abdurachmanov <david.abdurachmanov@gmail.com>
Fixes: b78002b395b4 ("riscv: add HAVE_SYSCALL_TRACEPOINTS to Kconfig")
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This patch adds auditing functions on entry to and exit from every system
call invocation.
Signed-off-by: David Abdurachmanov <david.abdurachmanov@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
On RISC-V (riscv) audit is supported through generic lib/audit.c.
The patch adds required arch specific definitions.
Signed-off-by: David Abdurachmanov <david.abdurachmanov@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This patch supports dynamic generate got and plt sections mechanism on
rv32. It contains the modification as follows:
- Always enable MODULE_SECTIONS (both rv64 and rv32)
- Change the fixed size type.
This patch had been tested by following modules:
btrfs 6795991 0 - Live 0xa544b000
test_static_keys 17304 0 - Live 0xa28be000
zstd_compress 1198986 1 btrfs, Live 0xa2a25000
zstd_decompress 608112 1 btrfs, Live 0xa24e7000
lzo 8787 0 - Live 0xa2049000
xor 27461 1 btrfs, Live 0xa2041000
zram 78849 0 - Live 0xa2276000
netdevsim 55909 0 - Live 0xa202d000
tun 211534 0 - Live 0xa21b5000
fuse 566049 0 - Live 0xa25fb000
nfs_layout_flexfiles 192597 0 - Live 0xa229b000
ramoops 74895 0 - Live 0xa2019000
xfs 3973221 0 - Live 0xa507f000
libcrc32c 3053 2 btrfs,xfs, Live 0xa34af000
lzo_compress 17302 2 btrfs,lzo, Live 0xa347d000
lzo_decompress 7178 2 btrfs,lzo, Live 0xa3451000
raid6_pq 142086 1 btrfs, Live 0xa33a4000
reed_solomon 31022 1 ramoops, Live 0xa31eb000
test_bitmap 3734 0 - Live 0xa31af000
test_bpf 1588736 0 - Live 0xa2c11000
test_kmod 41161 0 - Live 0xa29f8000
test_module 1356 0 - Live 0xa299e000
test_printf 6024 0 [permanent], Live 0xa2971000
test_static_key_base 5797 1 test_static_keys, Live 0xa2931000
test_user_copy 4382 0 - Live 0xa28c9000
xxhash 70501 2 zstd_compress,zstd_decompress, Live 0xa2055000
Signed-off-by: Zong Li <zong@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Add IPI_CPU_STOP message and use it in smp_send_stop to stop other cpus,
but not itself. Mark cpu offline on reception of IPI_CPU_STOP.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
CONFIG_CMDLINE_FORCE doesn't work on RISC-V when no DTB is passed into
the kernel. This is because the code that forces the kernel command
line only runs if a valid DTB is present at boot. During debugging,
it's useful to have the ability to force kernel command lines even
when no DTB is present. This patch adds support for doing so.
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: linux-riscv@lists.infradead.org
Cc: linux-kernel@vger.kernel.org (open list)
Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The objcopy only emits loadable sections when creating flat kernel
Image. To have minimal possible size of flat kernel Image, we should
have all non-loadable sections after loadable sections.
Currently, execption table section (loadable section) is after BSS
section (non-loadable section) in the RISC-V vmlinux.lds.S. This
is not optimal for having minimal flat kernel Image size hence this
patch makes BSS section as the last section in RISC-V vmlinux.lds.S.
In addition, we make BSS section aligned to 16byte instead of PAGE
aligned which further reduces flat kernel Image size by few KBs.
The flat kernel Image size of Linux-4.20-rc4 using GCC 8.2.0 is
8819980 bytes with current RISC-V vmlinux.lds.S and it reduces to
7991740 bytes with this patch applied. In summary, this patch reduces
Linux-4.20-rc4 flat kernel Image size by 809 KB.
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument
of the user address range verification function since we got rid of the
old racy i386-only code to walk page tables by hand.
It existed because the original 80386 would not honor the write protect
bit when in kernel mode, so you had to do COW by hand before doing any
user access. But we haven't supported that in a long time, and these
days the 'type' argument is a purely historical artifact.
A discussion about extending 'user_access_begin()' to do the range
checking resulted this patch, because there is no way we're going to
move the old VERIFY_xyz interface to that model. And it's best done at
the end of the merge window when I've done most of my merges, so let's
just get this done once and for all.
This patch was mostly done with a sed-script, with manual fix-ups for
the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form.
There were a couple of notable cases:
- csky still had the old "verify_area()" name as an alias.
- the iter_iov code had magical hardcoded knowledge of the actual
values of VERIFY_{READ,WRITE} (not that they mattered, since nothing
really used it)
- microblaze used the type argument for a debug printout
but other than those oddities this should be a total no-op patch.
I tried to fix up all architectures, did fairly extensive grepping for
access_ok() uses, and the changes are trivial, but I may have missed
something. Any missed conversion should be trivially fixable, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that we have earlycon support in the SBI console driver there is no
reason to have our arch-specific early printk support. This patch set
turns on SBI earlycon support and removes the old early printk.
Noticed while building kernel-4.20.0-0.rc5.git2.1.fc30 for
Fedora 30/RISCV.
[..]
BUILDSTDERR: arch/riscv/kernel/ftrace.c: In function 'prepare_ftrace_return':
BUILDSTDERR: arch/riscv/kernel/ftrace.c:135:6: warning: unused variable 'err' [-Wunused-variable]
BUILDSTDERR: int err;
BUILDSTDERR: ^~~
[..]
Signed-off-by: David Abdurachmanov <david.abdurachmanov@gmail.com>
Fixes: e949b6db51 ("riscv/function_graph: Simplify with function_graph_enter()")
Reviewed-by: Olof Johansson <olof@lixom.net>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Fix of_node* refcount at various places by using of_node_put.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The EARLY_PRINTK using SBI console calls is not required
any more because we now have RISC-V SBI support in generic
earlycon framework.
Signed-off-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
was introduced by a patch that tried to fix one bug, but by doing so created
another bug. As both bugs corrupt the output (but they do not crash the
kernel), I decided to fix the design such that it could have both bugs
fixed. The original fix, fixed time reporting of the function graph tracer
when doing a max_depth of one. This was code that can test how much the
kernel interferes with userspace. But in doing so, it could corrupt the time
keeping of the function profiler.
The issue is that the curr_ret_stack variable was being used for two
different meanings. One was to keep track of the stack pointer on the
ret_stack (shadow stack used by the function graph tracer), and the other
use case was the graph call depth. Although, the two may be closely
related, where they got updated was the issue that lead to the two different
bugs that required the two use cases to be updated differently.
The big issue with this fix is that it requires changing each architecture.
The good news is, I was able to remove a lot of code that was duplicated
within the architectures and place it into a single location. Then I could
make the fix in one place.
I pushed this code into linux-next to let it settle over a week, and before
doing so, I cross compiled all the affected architectures to make sure that
they built fine.
In the mean time, I also pulled in a patch that fixes the sched_switch
previous tasks state output, that was not actually correct.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCW/4NPhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qnWAAQCyUIRLgYImr81eTl52lxNRsULk+aiI
U29kRFWWU0c40AEA1X9sDF0MgOItbRGfZtnHTZEousXRDaDf4Fge2kF7Egg=
=liQ0
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"While rewriting the function graph tracer, I discovered a design flaw
that was introduced by a patch that tried to fix one bug, but by doing
so created another bug.
As both bugs corrupt the output (but they do not crash the kernel), I
decided to fix the design such that it could have both bugs fixed. The
original fix, fixed time reporting of the function graph tracer when
doing a max_depth of one. This was code that can test how much the
kernel interferes with userspace. But in doing so, it could corrupt
the time keeping of the function profiler.
The issue is that the curr_ret_stack variable was being used for two
different meanings. One was to keep track of the stack pointer on the
ret_stack (shadow stack used by the function graph tracer), and the
other use case was the graph call depth. Although, the two may be
closely related, where they got updated was the issue that lead to the
two different bugs that required the two use cases to be updated
differently.
The big issue with this fix is that it requires changing each
architecture. The good news is, I was able to remove a lot of code
that was duplicated within the architectures and place it into a
single location. Then I could make the fix in one place.
I pushed this code into linux-next to let it settle over a week, and
before doing so, I cross compiled all the affected architectures to
make sure that they built fine.
In the mean time, I also pulled in a patch that fixes the sched_switch
previous tasks state output, that was not actually correct"
* tag 'trace-v4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
sched, trace: Fix prev_state output in sched_switch tracepoint
function_graph: Have profiler use curr_ret_stack and not depth
function_graph: Reverse the order of pushing the ret_stack and the callback
function_graph: Move return callback before update of curr_ret_stack
function_graph: Use new curr_ret_depth to manage depth instead of curr_ret_stack
function_graph: Make ftrace_push_return_trace() static
sparc/function_graph: Simplify with function_graph_enter()
sh/function_graph: Simplify with function_graph_enter()
s390/function_graph: Simplify with function_graph_enter()
riscv/function_graph: Simplify with function_graph_enter()
powerpc/function_graph: Simplify with function_graph_enter()
parisc: function_graph: Simplify with function_graph_enter()
nds32: function_graph: Simplify with function_graph_enter()
MIPS: function_graph: Simplify with function_graph_enter()
microblaze: function_graph: Simplify with function_graph_enter()
arm64: function_graph: Simplify with function_graph_enter()
ARM: function_graph: Simplify with function_graph_enter()
x86/function_graph: Simplify with function_graph_enter()
function_graph: Create function_graph_enter() to consolidate architecture code
The function_graph_enter() function does the work of calling the function
graph hook function and the management of the shadow stack, simplifying the
work done in the architecture dependent prepare_ftrace_return().
Have riscv use the new code, and remove the shadow stack management as well as
having to set up the trace structure.
This is needed to prepare for a fix of a design bug on how the curr_ret_stack
is used.
Cc: Greentime Hu <greentime@andestech.com>
Cc: Alan Kao <alankao@andestech.com>
Cc: stable@kernel.org
Fixes: 03274a3ffb ("tracing/fgraph: Adjust fgraph depth before calling trace return callback")
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Removes the warning about an unsupported ISA when reading /proc/cpuinfo
on QEMU. The "S" extension is not being returned as it is not accessible
from userspace.
Signed-off-by: Patrick Stählin <me@packi.ch>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This patch extends Linux RISC-V build system to build and install:
Image - Flat uncompressed kernel image
Image.gz - Flat and GZip compressed kernel image
Quiet a few bootloaders (such as Uboot, UEFI, etc) are capable of
booting flat and compressed kernel images. In case of Uboot, booting
Image or Image.gz is achieved using bootm command.
The flat and uncompressed kernel image (i.e. Image) is very useful
in pre-silicon developent and testing because we can create back-door
HEX files for RAM on FPGAs from Image.
Signed-off-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Fixes:
arch/riscv/kernel/module.c: In function 'apply_r_riscv_32_rela':
./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=]
arch/riscv/kernel/module.c:23:27: note: format string is defined here
arch/riscv/kernel/module.c: In function 'apply_r_riscv_pcrel_hi20_rela':
./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=]
arch/riscv/kernel/module.c:104:23: note: format string is defined here
arch/riscv/kernel/module.c: In function 'apply_r_riscv_hi20_rela':
./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=]
arch/riscv/kernel/module.c:146:23: note: format string is defined here
arch/riscv/kernel/module.c: In function 'apply_r_riscv_got_hi20_rela':
./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=]
arch/riscv/kernel/module.c:190:60: note: format string is defined here
arch/riscv/kernel/module.c: In function 'apply_r_riscv_call_plt_rela':
./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=]
arch/riscv/kernel/module.c:214:24: note: format string is defined here
arch/riscv/kernel/module.c: In function 'apply_r_riscv_call_rela':
./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'Elf32_Addr' {aka 'unsigned int'} [-Wformat=]
arch/riscv/kernel/module.c:236:23: note: format string is defined here
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
On the Hifive-U platform, cpu 0 is a masked cpu with less capabilities
than the other cpus. Ignore it for the purpose of determining the
hardware capabilities of the system.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This patch series now has evolved to contain several related changes.
1. Updated the assorted cleanup series by Palmer.
The original cleanup patch series can be found here.
http://lists.infradead.org/pipermail/linux-riscv/2018-August/001232.html
2. Implemented decoupling linux logical CPU ids from hart id.
Some of the work has been inspired from ARM64.
Tested on QEMU & HighFive Unleashed board with/without SMP enabled.
3. Included Anup's cleanup and IPI stat patch.
All the patch series have been combined to avoid conflicts as a lot of
common code is changed different patch sets. Atish has mostly addressed
review comments and fixed checkpatch errors from Palmer's and Anup's
series.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This patch set fixes up various failures in the RV32I port. The fixes
are all nominally independent, but are really only testable together
because the RV32I port fails to build without all of them. The patch
set includes:
* The removal of tishift on RV32I targets, as 128-bit integers are not
supported by the toolchain.
* The removal of swiotlb from RV32I targets, since all physical
addresses can be mapped by all hardware on all existing RV32I targets.
* The addition of ummodi3 and udivmoddi4 from an old version of GCC that
was licensed under GPLv2 as generic code, along with their use on
RV32I targets.
* A fix to our page alignment logic within ioremap for RV32I targets.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This patchset adds an option, CONFIG_FPU, to enable/disable floating-
point support within the kernel. The kernel's new behavior will be as
follows:
* with CONFIG_FPU=y
All FPU codes are reserved. If no FPU is found during booting, a
global flag will be set, and those functions will be bypassed with
condition check to that flag.
* with CONFIG_FPU=n
No floating-point instructions in kernel and all related settings
are excluded.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This export is not only not needed, but also breaks symbol versioning
due to being an undeclared assembly export.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Add a variable and a macro to describe FP registers, assuming only D is
supported. FP code is conditional on CONFIG_FPU. The FP regs and FCSR
are copied separately to avoid copying struct padding. Tested by hand and
with the gdb testsuite.
Signed-off-by: Jim Wilson <jimw@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The RISC-V Linux port doesn't support systems that have the F extension
but don't have the D extension -- we actually don't support systems
without D either, but Alan's patch set is rectifying that soon. For now
I think we can leave this in a semi-broken state and just wait for
Alan's patch set to get merged for proper non-FPU support -- the patch
set is starting to look good, so doing something in-between doesn't seem
like it's worth the work.
I don't think it's worth fretting about support for systems with F but
not D for now: our glibc ABIs are IMAC and IMAFDC so they probably won't
end up being popular. We can always extend this in the future.
CC: Alan Kao <alankao@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
These are just hard coded in the RISC-V port, which doesn't make any
sense. We should probably be setting these from device tree entries
when they exist, but for now I think it's saner to just leave them all
as their default values.
Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This patch provides arch_show_interrupts() implementation to
show IPI stats via /proc/interrupts.
Now the contents of /proc/interrupts" will look like below:
CPU0 CPU1 CPU2 CPU3
8: 17 7 6 14 SiFive PLIC 8 virtio0
10: 10 10 9 11 SiFive PLIC 10 ttyS0
IPI0: 170 673 251 79 Rescheduling interrupts
IPI1: 1 12 27 1 Function call interrupts
Signed-off-by: Anup Patel <anup@brainfault.org>
[Atish - Fixed checkpatch errors]
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
Changes since v2:
- Remove use of IPI_CALL_WAKEUP because it's being removed
Changes since v1:
- Add stub inline show_ipi_stats() function for !CONFIG_SMP
- Make ipi_names[] dynamically sized at compile time
- Minor beautification of ipi_names[] using tabs
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Currently, /proc/cpuinfo show logical CPU ID as Hart ID which
is in-correct. This patch shows CPU ID and Hart ID separately
in /proc/cpuinfo using cpuid_to_hardid_map().
With this patch, contents of /proc/cpuinfo looks as follows:
processor : 0
hart : 1
isa : rv64imafdc
mmu : sv48
processor : 1
hart : 0
isa : rv64imafdc
mmu : sv48
processor : 2
hart : 2
isa : rv64imafdc
mmu : sv48
processor : 3
hart : 3
isa : rv64imafdc
mmu : sv48
Signed-off-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Setup the cpu_logical_map during boot. Moreover, every SBI call
and PLIC context are based on the physical hartid. Use the logical
CPU to hartid mapping to pass correct hartid to respective functions.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Currently, both Linux CPU id and hart id are same.
This is not recommended as it will lead to discontinuous CPU
indexing in Linux. Moreover, kdump kernel will run from CPU0
which would be absent if we follow existing scheme.
Implement a logical mapping between Linux CPU id and hart
id to decouple these two. Always mark the boot processor as
CPU0 and all other CPUs get the logical CPU id based on their
booting order.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The secondary harts spin on couple of per cpu variables until both of
these are non-zero so it's not necessary to have any ordering here.
However, WRITE_ONCE should be used to avoid tearing.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
commit f1f1007644 ("mm: add new mmgrab() helper") added a
helper that we missed out on.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The old name was a bit odd.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
It's a bit confusing exactly what this function does: it actually
returns the hartid of an OF processor node, failing with -1 on invalid
nodes. I've changed the name to _hartid() in order to make that a bit
more clear, as well as adding a comment.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
[Atish: code comment formatting update]
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Currently, irq is enabled before preemption disabling happens.
If the scheduler fired right here and cpu is scheduled then it
may blow up.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
[Atish: Commit text and code comment formatting update]
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
We shouldn't be directly passing device tree values to userspace, both
because there could be mistakes in device trees and because the kernel
doesn't support arbitrary ISAs.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
[Atish: checkpatch fix and code comment formatting update]
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
These are just hard coded in the RISC-V port, which doesn't make any
sense. We should probably be setting these from device tree entries
when they exist, but for now I think it's saner to just leave them all
as their default values.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The scause is already part of pt_regs so no need to pass
scause as separate arg to do_IRQ().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Only RV64 supports swiotlb. On RV32, it don't select the SWIOTLB.
Signed-off-by: Zong Li <zong@andestech.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
We expect that a kernel with CONFIG_FPU=y can still support no-FPU
machines. To do so, the kernel should first examine the existence of a
FPU, then do nothing if a FPU does exist; otherwise, it should
disable/bypass all FPU-related functions.
In this patch, a new global variable, has_fpu, is created and determined
when parsing the hardware capability from device tree during booting.
This variable is used in those FPU-related functions.
Signed-off-by: Alan Kao <alankao@andestech.com>
Cc: Greentime Hu <greentime@andestech.com>
Cc: Vincent Chen <vincentc@andestech.com>
Cc: Zong Li <zong@andestech.com>
Cc: Nick Hu <nickhu@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
FPU codes have been separated from common part in previous patches.
This patch add the CONFIG_FPU option and some stubs, so that a no-FPU
configuration is allowed.
Signed-off-by: Alan Kao <alankao@andestech.com>
Cc: Greentime Hu <greentime@andestech.com>
Cc: Vincent Chen <vincentc@andestech.com>
Cc: Zong Li <zong@andestech.com>
Cc: Nick Hu <nickhu@andestech.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
FPU-related logic is separated from normal signal handling path in
this patch. Kernel can easily be configured to exclude those procedures
for no-FPU systems.
Signed-off-by: Alan Kao <alankao@andestech.com>
Cc: Greentime Hu <greentime@andestech.com>
Cc: Vincent Chen <vincentc@andestech.com>
Cc: Zong Li <zong@andestech.com>
Cc: Nick Hu <nickhu@andestech.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
We move __fstate_save and __fstate_restore to a new source
file, fpu.S.
Signed-off-by: Alan Kao <alankao@andestech.com>
Cc: Greentime Hu <greentime@andestech.com>
Cc: Vincent Chen <vincentc@andestech.com>
Cc: Zong Li <zong@andestech.com>
Cc: Nick Hu <nickhu@andestech.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Use memblock_end_of_DRAM which provides correct last low memory
PFN. Without that, DMA32 region becomes empty resulting in zero
pages being allocated for DMA32.
This patch is based on earlier patch from palmer which never
merged into 4.19. I just edited the commit text to make more
sense.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
setup_initrd() overwrites initrd_start and initrd_end if __initramfs_size
is larger than 0, which is always true even if there is no embedded
initramfs. This prevents booting qemu with "-initrd" parameter.
Overwriting initrd_start and initrd_end is not necessary since
__initramfs_start and __initramfs_size are used directly in
populate_rootfs() to load the built-in initramfs, so just drop
that code.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Thanks to Christoph Hellwig for pointing out a cleaner way to do this,
as my approach was quite ugly.
CC: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This would be necessary to make non-SMP builds work, but there is
another error in the implementation of our syscall linkage that actually
just causes sys_riscv_flush_icache to never build. I've build tested
this on allnoconfig and allnoconfig+SMP=y, as well as defconfig like
normal.
CC: Christoph Hellwig <hch@infradead.org>
CC: Guenter Roeck <linux@roeck-us.net>
In-Reply-To: <20180809055830.GA17533@infradead.org>
In-Reply-To: <20180809132612.GA31058@roeck-us.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Enabling both CONFIG_PERF_EVENTS without !CONFIG_SMP
generates following compilation error.
arch/riscv/include/asm/perf_event.h:80:2: error: expected
specifier-qualifier-list before 'irqreturn_t'
irqreturn_t (*handle_irq)(int irq_num, void *dev);
^~~~~~~~~~~
Include interrupt.h in proper place to avoid compilation
error.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The stvec's value must be 4 byte alignment by specification definition.
These directives avoid to stvec be set the non-alignment value.
Signed-off-by: Zong Li <zong@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The RISC-V ISA defines a per-hart real-time clock and timer, which is
present on all systems. The clock is accessed via the 'rdtime'
pseudo-instruction (which reads a CSR), and the timer is set via an SBI
call.
Contains various improvements from Atish Patra <atish.patra@wdc.com>.
Signed-off-by: Dmitriy Cherkasov <dmitriy@oss-tech.org>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
[hch: remove dead code, add SPDX tags, used riscv_of_processor_hart(),
minor cleanups, merged hotplug cpu support and other improvements
from Atish]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Add support for a routine that dispatches exceptions with the interrupt
flags set to either the IPI or irqdomain code (and the clock source in the
future).
Loosely based on the irq-riscv-int.c irqchip driver from the RISC-V tree.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Rename handle_ipi to riscv_software_interrupt, drop the unused return
value and move the prototype to irq.h together with riscv_timer_interupt.
This allows simplifying the upcoming interrupt handling support.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This code is currently unused and will be added back later in a different
place with the real interrupt and clocksource support.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This code lives entirely within the RISC-V arch code. I've left it
within an "#ifdef CONFIG_EARLY_PRINTK" despite always having
EARLY_PRINTK support on RISC-V just in case someone wants to remove
it.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Adding 4 to sepc is pointless, and is wrong if we executed a 2-byte
compressed breakpoint. This plus a corresponding gdb patch allows
compressed breakpoints to work in gdb. Gdb maintainers have already
agreed that this is the right approach.
Signed-off-by: Jim Wilson <jimw@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
If you use a 64-bit compiler to build a 32-bit kernel then you'll get an
error when building the vDSO due to a library mismatch. The happens
because the relevant "-march" argument isn't supplied to the GCC run
that generates one of the vDSO intermediate files.
I'm not actually sure what the right thing to do here is as I'm not
particularly familiar with the kernel build system. I poked the
documentation and it appears that KCFLAGS is the correct thing to do
(it's suggested that should be used when building modules), but we set
KBUILD_CFLAGS in arch/riscv/Makefile.
This does at least fix the build error.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
These patches for building 32-bit RISC-V kernel.
- Fix the compile errors and warnings on RV32I.
- Fix some incompatible problem on RV32I.
- Add format.h for compatible of print format.
The fixed width integer types format for Elf_Addr will move to
generic header by another patch. For now, there are some warning
about unexpected argument of type on RV32I.
Change in v1:
- Fix some error in v1
- Remove implementation of fixed width integer types format for Elf_Addr.
In riscv_gpr_set, pass regs instead of ®s to user_regset_copyin to fix
gdb segfault.
Signed-off-by: Jim Wilson <jimw@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This file has never existed in the upstream kernel, but it's guarded by
an #ifdef that's also never existed in the upstream kernel. As a part
of our interrupt controller refactoring this header is no longer
necessary, but this reference managed to sneak in anyway.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The DT core will call of_platform_default_populate, so it is not
necessary for arch specific code to call it unless there are custom
match entries, auxdata or parent device. Neither of those apply here, so
remove the call.
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: linux-riscv@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The R_RISCV_ADD32/R_RISCV_SUB32 relocations should add/subtract the
address of the symbol (without overflow check), not its contents.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This tag contains some small RISC-V updates I'd like to target for 4.18.
They are all fairly small this time. Here's a short summary, there's
more info in the commits/merges.
* A fix to __clear_user to respect the passed arguments.
* Enough support for the perf subsystem to work with RISC-V's ISA
defined performance counters.
* Support for sparse and cleanups suggested by it.
* Support for R_RISCV_32 (a relocation, not the 32-bit ISA).
* Some MAINTAINERS cleanups.
* The addition of CONFIG_HVC_RISCV_SBI to our defconfig, as it's always
present.
I've given these a simple build+boot test.
-----BEGIN PGP SIGNATURE-----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=D+sb
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-4.18-merge_window' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux
Pull RISC-V updates from Palmer Dabbelt:
"This contains some small RISC-V updates I'd like to target for 4.18.
They are all fairly small this time. Here's a short summary, there's
more info in the commits/merges:
- a fix to __clear_user to respect the passed arguments.
- enough support for the perf subsystem to work with RISC-V's ISA
defined performance counters.
- support for sparse and cleanups suggested by it.
- support for R_RISCV_32 (a relocation, not the 32-bit ISA).
- some MAINTAINERS cleanups.
- the addition of CONFIG_HVC_RISCV_SBI to our defconfig, as it's
always present.
I've given these a simple build+boot test"
* tag 'riscv-for-linus-4.18-merge_window' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
RISC-V: Add CONFIG_HVC_RISCV_SBI=y to defconfig
RISC-V: Handle R_RISCV_32 in modules
riscv/ftrace: Export _mcount when DYNAMIC_FTRACE isn't set
riscv: add riscv-specific predefines to CHECKFLAGS
riscv: split the declaration of __copy_user
riscv: no __user for probe_kernel_address()
riscv: use NULL instead of a plain 0
perf: riscv: Add Document for Future Porting Guide
perf: riscv: preliminary RISC-V support
MAINTAINERS: Update Albert's email, he's back at Berkeley
MAINTAINERS: Add myself as a maintainer for SiFive's drivers
riscv: Fix the bug in memory access fixup code
This patch set contains a handful of fixes that clean up the sparse
results for the RISC-V port. These patches shouldn't have any
functional difference. The patches:
* Use NULL instead of 0.
* Clean up __user annotations.
* Split __copy_user into two functions, to make the __user annotations
valid.
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
With CONFIG_MODVERSIONS=y the R_RISCV_32 relocation is used by the
__kcrctab section.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The EXPORT_SYMBOL(_mcount) for RISC-V ended up inside a
CONFIG_DYNAMIC_FTRACE ifdef. If you enable modules without enabling
CONFIG_DYNAMIC_FTRACE then you'll get a build error without this patch
because the modules won't be able to find _mcount.
The new behavior is to export _mcount whenever CONFIG_FUNCTION_TRACER is
defined. This matches what every other architecture is doing.
Signed-off-by: Alan Kao <alankao@andestech.com>
Cc: Greentime Hu <greentime@andestech.com>
Cc: Zong Li <zong@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
We use a single __copy_user assembly function to copy memory both from
and to userspace. While this works, it triggers sparse errors because
we're implicitly casting between the kernel and user address spaces by
calling __copy_user.
This patch splits the C declaration into a pair of functions,
__asm_copy_{to,from}_user, that have sane semantics WRT __user. This
split make things fine from sparse's point of view. The assembly
implementation keeps a single definition but add a double ENTRY() for it,
one for __asm_copy_to_user and another one for __asm_copy_from_user.
The result is a spare-safe implementation that pays no performance
or code size penalty.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
- Spectre v4 mitigation (Speculative Store Bypass Disable) support for
arm64 using SMC firmware call to set a hardware chicken bit
- ACPI PPTT (Processor Properties Topology Table) parsing support and
enable the feature for arm64
- Report signal frame size to user via auxv (AT_MINSIGSTKSZ). The
primary motivation is Scalable Vector Extensions which requires more
space on the signal frame than the currently defined MINSIGSTKSZ
- ARM perf patches: allow building arm-cci as module, demote dev_warn()
to dev_dbg() in arm-ccn event_init(), miscellaneous cleanups
- cmpwait() WFE optimisation to avoid some spurious wakeups
- L1_CACHE_BYTES reverted back to 64 (for performance reasons that have
to do with some network allocations) while keeping ARCH_DMA_MINALIGN
to 128. cache_line_size() returns the actual hardware Cache Writeback
Granule
- Turn LSE atomics on by default in Kconfig
- Kernel fault reporting tidying
- Some #include and miscellaneous cleanups
-----BEGIN PGP SIGNATURE-----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=uums
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"Apart from the core arm64 and perf changes, the Spectre v4 mitigation
touches the arm KVM code and the ACPI PPTT support touches drivers/
(acpi and cacheinfo). I should have the maintainers' acks in place.
Summary:
- Spectre v4 mitigation (Speculative Store Bypass Disable) support
for arm64 using SMC firmware call to set a hardware chicken bit
- ACPI PPTT (Processor Properties Topology Table) parsing support and
enable the feature for arm64
- Report signal frame size to user via auxv (AT_MINSIGSTKSZ). The
primary motivation is Scalable Vector Extensions which requires
more space on the signal frame than the currently defined
MINSIGSTKSZ
- ARM perf patches: allow building arm-cci as module, demote
dev_warn() to dev_dbg() in arm-ccn event_init(), miscellaneous
cleanups
- cmpwait() WFE optimisation to avoid some spurious wakeups
- L1_CACHE_BYTES reverted back to 64 (for performance reasons that
have to do with some network allocations) while keeping
ARCH_DMA_MINALIGN to 128. cache_line_size() returns the actual
hardware Cache Writeback Granule
- Turn LSE atomics on by default in Kconfig
- Kernel fault reporting tidying
- Some #include and miscellaneous cleanups"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (53 commits)
arm64: Fix syscall restarting around signal suppressed by tracer
arm64: topology: Avoid checking numa mask for scheduler MC selection
ACPI / PPTT: fix build when CONFIG_ACPI_PPTT is not enabled
arm64: cpu_errata: include required headers
arm64: KVM: Move VCPU_WORKAROUND_2_FLAG macros to the top of the file
arm64: signal: Report signal frame size to userspace via auxv
arm64/sve: Thin out initialisation sanity-checks for sve_max_vl
arm64: KVM: Add ARCH_WORKAROUND_2 discovery through ARCH_FEATURES_FUNC_ID
arm64: KVM: Handle guest's ARCH_WORKAROUND_2 requests
arm64: KVM: Add ARCH_WORKAROUND_2 support for guests
arm64: KVM: Add HYP per-cpu accessors
arm64: ssbd: Add prctl interface for per-thread mitigation
arm64: ssbd: Introduce thread flag to control userspace mitigation
arm64: ssbd: Restore mitigation status on CPU resume
arm64: ssbd: Skip apply_ssbd if not using dynamic mitigation
arm64: ssbd: Add global mitigation state accessor
arm64: Add 'ssbd' command-line option
arm64: Add ARCH_WORKAROUND_2 probing
arm64: Add per-cpu infrastructure to call ARCH_WORKAROUND_2
arm64: Call ARCH_WORKAROUND_2 on transitions between EL0 and EL1
...
In is_valid_bugaddr(), probe_kernel_address() is called with
the PC casted to (bug_inst_t __user *) but this function
only take a plain void* as argument, not a __user pointer.
Fix this by removing the unnneded __user in the cast.
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Pull siginfo updates from Eric Biederman:
"This set of changes close the known issues with setting si_code to an
invalid value, and with not fully initializing struct siginfo. There
remains work to do on nds32, arc, unicore32, powerpc, arm, arm64, ia64
and x86 to get the code that generates siginfo into a simpler and more
maintainable state. Most of that work involves refactoring the signal
handling code and thus careful code review.
Also not included is the work to shrink the in kernel version of
struct siginfo. That depends on getting the number of places that
directly manipulate struct siginfo under control, as it requires the
introduction of struct kernel_siginfo for the in kernel things.
Overall this set of changes looks like it is making good progress, and
with a little luck I will be wrapping up the siginfo work next
development cycle"
* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (46 commits)
signal/sh: Stop gcc warning about an impossible case in do_divide_error
signal/mips: Report FPE_FLTUNK for undiagnosed floating point exceptions
signal/um: More carefully relay signals in relay_signal.
signal: Extend siginfo_layout with SIL_FAULT_{MCEERR|BNDERR|PKUERR}
signal: Remove unncessary #ifdef SEGV_PKUERR in 32bit compat code
signal/signalfd: Add support for SIGSYS
signal/signalfd: Remove __put_user from signalfd_copyinfo
signal/xtensa: Use force_sig_fault where appropriate
signal/xtensa: Consistenly use SIGBUS in do_unaligned_user
signal/um: Use force_sig_fault where appropriate
signal/sparc: Use force_sig_fault where appropriate
signal/sparc: Use send_sig_fault where appropriate
signal/sh: Use force_sig_fault where appropriate
signal/s390: Use force_sig_fault where appropriate
signal/riscv: Replace do_trap_siginfo with force_sig_fault
signal/riscv: Use force_sig_fault where appropriate
signal/parisc: Use force_sig_fault where appropriate
signal/parisc: Use force_sig_mceerr where appropriate
signal/openrisc: Use force_sig_fault where appropriate
signal/nios2: Use force_sig_fault where appropriate
...
This patch provide a basic PMU, riscv_base_pmu, which supports two
general hardware event, instructions and cycles. Furthermore, this
PMU serves as a reference implementation to ease the portings in
the future.
riscv_base_pmu should be able to run on any RISC-V machine that
conforms to the Priv-Spec. Note that the latest qemu model hasn't
fully support a proper behavior of Priv-Spec 1.10 yet, but work
around should be easy with very small fixes. Please check
https://github.com/riscv/riscv-qemu/pull/115 for future updates.
Cc: Nick Hu <nickhu@andestech.com>
Cc: Greentime Hu <greentime@andestech.com>
Signed-off-by: Alan Kao <alankao@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
All RISC-V platforms today lack an IOMMU. However, legacy PCI devices
sometimes require DMA-memory to be in the low 32 bits. To make this work,
we enable the software-based bounce buffers from swiotlb. They only impose
overhead when the device in question cannot address the full 64-bit address
space, so a perfect fit.
This patch assumes that DMA is coherent with the processor and the PCI
bus. It also assumes that the processor and devices share a common
address space. This is true for all RISC-V platforms so far.
[changelog stolen from an earlier patch by Palmer Dabbelt that did the
more complicated swiotlb wireup before the recent consolidation]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Palmer Dabbelt <palmer@sifive.com>
The original intent in cacheinfo was that an architecture
specific populate_cache_leaves() would probe the hardware
and then cache_shared_cpu_map_setup() and
cache_override_properties() would provide firmware help to
extend/expand upon what was probed. Arm64 was really
the only architecture that was working this way, and
with the removal of most of the hardware probing logic it
became clear that it was possible to simplify the logic a bit.
This patch combines the walk of the DT nodes with the
code updating the cache size/line_size and nr_sets.
cache_override_properties() (which was DT specific) is
then removed. The result is that cacheinfo.of_node is
no longer used as a temporary place to hold DT references
for future calls that update cache properties. That change
helps to clarify its one remaining use (matching
cacheinfo nodes that represent shared caches) which
will be used by the ACPI/PPTT code in the following patches.
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Tested-by: Vijaya Kumar K <vkilari@codeaurora.org>
Tested-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Tested-by: Tomasz Nowicki <Tomasz.Nowicki@cavium.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The function force_sig_fault is just the generic version of
do_trap_siginfo with a (void __user *) instead of an unsigned long
parameter for the address.
So just use force_sig_fault to simplify the code.
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <albert@sifive.com>
Cc: linux-riscv@lists.infradead.org
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Filling in struct siginfo before calling force_sig_info a tedious and
error prone process, where once in a great while the wrong fields
are filled out, and siginfo has been inconsistently cleared.
Simplify this process by using the helper force_sig_fault. Which
takes as a parameters all of the information it needs, ensures
all of the fiddly bits of filling in struct siginfo are done properly
and then calls force_sig_info.
In short about a 5 line reduction in code for every time force_sig_info
is called, which makes the calling function clearer.
Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <albert@sifive.com>
Cc: linux-riscv@lists.infradead.org
Acked-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Call clear_siginfo to ensure every stack allocated siginfo is properly
initialized before being passed to the signal sending functions.
Note: It is not safe to depend on C initializers to initialize struct
siginfo on the stack because C is allowed to skip holes when
initializing a structure.
The initialization of struct siginfo in tracehook_report_syscall_exit
was moved from the helper user_single_step_siginfo into
tracehook_report_syscall_exit itself, to make it clear that the local
variable siginfo gets fully initialized.
In a few cases the scope of struct siginfo has been reduced to make it
clear that siginfo siginfo is not used on other paths in the function
in which it is declared.
Instances of using memset to initialize siginfo have been replaced
with calls clear_siginfo for clarity.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Debian toolcahin defaults to PIE, and I guess that will also be the case
of most distributions. This causes the following build failure:
AS arch/riscv/kernel/vdso/getcpu.o
AS arch/riscv/kernel/vdso/flush_icache.o
VDSOLD arch/riscv/kernel/vdso/vdso.so.dbg
OBJCOPY arch/riscv/kernel/vdso/vdso.so
AS arch/riscv/kernel/vdso/vdso.o
VDSOLD arch/riscv/kernel/vdso/vdso-dummy.o
LD arch/riscv/kernel/vdso/vdso-syms.o
riscv64-linux-gnu-ld: attempted static link of dynamic object `arch/riscv/kernel/vdso/vdso-dummy.o'
make[2]: *** [arch/riscv/kernel/vdso/Makefile:43: arch/riscv/kernel/vdso/vdso-syms.o] Error 1
make[1]: *** [scripts/Makefile.build:575: arch/riscv/kernel/vdso] Error 2
make: *** [Makefile:1018: arch/riscv/kernel] Error 2
While the root Makefile correctly passes "-fno-PIE" to build individual
object files, the RISC-V kernel also builds vdso-dummy.o as an
executable, which is therefore linked as PIE. Fix that by updating this
specific link rule to also include "-no-pie".
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This tag contains the new features we'd like to incorporate into the
RISC-V port for 4.17. We might have a bit more stuff land later in the
merge window, but I wanted to get this out earlier just so everyone can
see where we currently stand.
A short summary of the changes is:
* We've added support for dynamic ftrace on RISC-V targets.
* There have been a handful of cleanups to our atomic and locking
routines. They now more closely match the released RISC-V memory
model draft.
* Our module loading support has been cleaned up and is now enabled by
default, despite some limitations still existing.
* A patch to define COMMANDLINE_FORCE instead of COMMANDLINE_OVERRIDE so
the generic device tree code picks up handling all our command line
stuff.
There's more information in the merge commits for each patch set.
-----BEGIN PGP SIGNATURE-----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=XrWX
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-4.17-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux
Pull RISC-V updates from Palmer Dabbelt:
"This contains the new features we'd like to incorporate into the
RISC-V port for 4.17. We might have a bit more stuff land later in the
merge window, but I wanted to get this out earlier just so everyone
can see where we currently stand.
A short summary of the changes is:
- We've added support for dynamic ftrace on RISC-V targets.
- There have been a handful of cleanups to our atomic and locking
routines. They now more closely match the released RISC-V memory
model draft.
- Our module loading support has been cleaned up and is now enabled
by default, despite some limitations still existing.
- A patch to define COMMANDLINE_FORCE instead of COMMANDLINE_OVERRIDE
so the generic device tree code picks up handling all our command
line stuff.
There's more information in the merge commits for each patch set"
* tag 'riscv-for-linus-4.17-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: (21 commits)
RISC-V: Rename CONFIG_CMDLINE_OVERRIDE to CONFIG_CMDLINE_FORCE
RISC-V: Add definition of relocation types
RISC-V: Enable module support in defconfig
RISC-V: Support SUB32 relocation type in kernel module
RISC-V: Support ADD32 relocation type in kernel module
RISC-V: Support ALIGN relocation type in kernel module
RISC-V: Support RVC_BRANCH/JUMP relocation type in kernel modulewq
RISC-V: Support HI20/LO12_I/LO12_S relocation type in kernel module
RISC-V: Support CALL relocation type in kernel module
RISC-V: Support GOT_HI20/CALL_PLT relocation type in kernel module
RISC-V: Add section of GOT.PLT for kernel module
RISC-V: Add sections of PLT and GOT for kernel module
riscv/atomic: Strengthen implementations with fences
riscv/spinlock: Strengthen implementations with fences
riscv/barrier: Define __smp_{store_release,load_acquire}
riscv/ftrace: Add HAVE_FUNCTION_GRAPH_RET_ADDR_PTR support
riscv/ftrace: Add DYNAMIC_FTRACE_WITH_REGS support
riscv/ftrace: Add ARCH_SUPPORTS_FTRACE_OPS support
riscv/ftrace: Add dynamic function graph tracer support
riscv/ftrace: Add dynamic function tracer support
...
Pull irq updates from Thomas Gleixner:
"The usual pile of boring changes:
- Consolidate tasklet functions to share code instead of duplicating
it
- The first step for making the low level entry handler management on
multi-platform kernels generic
- A new sysfs file which allows to retrieve the wakeup state of
interrupts.
- Ensure that the interrupt thread follows the effective affinity and
not the programmed affinity to avoid cross core wakeups.
- Two new interrupt controller drivers (Microsemi Ocelot and Qualcomm
PDC)
- Fix the wakeup path clock handling for Reneasas interrupt chips.
- Rework the boot time register reset for ARM GIC-V2/3
- Better suspend/resume support for ARM GIV-V3/ITS
- Add missing locking to the ARM GIC set_type() callback
- Small fixes for the irq simulator code
- SPDX identifiers for the irq core code and removal of boiler plate
- Small cleanups all over the place"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits)
openrisc: Set CONFIG_MULTI_IRQ_HANDLER
arm64: Set CONFIG_MULTI_IRQ_HANDLER
genirq: Make GENERIC_IRQ_MULTI_HANDLER depend on !MULTI_IRQ_HANDLER
irqchip/gic: Take lock when updating irq type
irqchip/gic: Update supports_deactivate static key to modern api
irqchip/gic-v3: Ensure GICR_CTLR.EnableLPI=0 is observed before enabling
irqchip: Add a driver for the Microsemi Ocelot controller
dt-bindings: interrupt-controller: Add binding for the Microsemi Ocelot interrupt controller
irqchip/gic-v3: Probe for SCR_EL3 being clear before resetting AP0Rn
irqchip/gic-v3: Don't try to reset AP0Rn
irqchip/gic-v3: Do not check trigger configuration of partitionned LPIs
genirq: Remove license boilerplate/references
genirq: Add missing SPDX identifiers
genirq/matrix: Cleanup SPDX identifier
genirq: Cleanup top of file comments
genirq: Pass desc to __irq_free instead of irq number
irqchip/gic-v3: Loudly complain about the use of IRQ_TYPE_NONE
irqchip/gic: Loudly complain about the use of IRQ_TYPE_NONE
RISC-V: Move to the new GENERIC_IRQ_MULTI_HANDLER handler
genirq: Add CONFIG_GENERIC_IRQ_MULTI_HANDLER
...
This cleans up the module support that was commited earlier to work with
what's actually emitted from our GCC port as it lands upstream. Most of
the work here is adding new relocations to the kernel.
There's some limitations on module loading imposed by the kernel:
* The kernel doesn't support linker relaxation, which is necessary to
support R_RISCV_ALIGN. In order to get reliable module building
you're going to need to a GCC that supports the new '-mno-relax',
which IIRC isn't going to be out until 8.1.0. It's somewhat unlikely
that R_RISCV_ALIGN will appear in a module even without '-mno-relax'
support, so issues shouldn't be common.
* There is no large code model for RISC-V, which means modules must be
loaded within a 32-bit signed offset of the kernel. We don't
currently have any mechanism for ensuring this memory remains free or
moving pages around, so issues here might be common.
I fixed a singcle merge conflict in arch/riscv/kernel/Makefile.
Just fail on align type. Kernel modules loader didn't do relax
like linker, it is difficult to remove or migrate the code,
but the remnant nop instructions harm the performaace of module.
We expect the building module with the no-relax option.
Signed-off-by: Zong Li <zong@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
HI20 and LO12_I/LO12_S relocate the absolute address, the range of
offset must in 32-bit.
Signed-off-by: Zong Li <zong@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
For CALL_PLT, emit the plt entry only when offset is more than 32-bit.
For PCREL_LO12, it uses the location of corresponding HI20 to
get the address of external symbol. It should check the HI20 type
is the PCREL_HI20 or GOT_HI20, because sometime the location will
have two or more relocation types.
For example:
0: 00000797 auipc a5,0x0
0: R_RISCV_ALIGN *ABS*
0: R_RISCV_GOT_HI20 SYMBOL
4: 0007b783 ld a5,0(a5) # 0 <SYMBOL>
4: R_RISCV_PCREL_LO12_I .L0
4: R_RISCV_RELAX *ABS*
Signed-off-by: Zong Li <zong@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Separate the function symbol address from .plt to .got.plt section.
The original plt entry has trampoline code with symbol address,
there is a 32-bit padding bwtween jar instruction and symbol address.
Extract the symbol address to .got.plt to reduce the module size.
Signed-off-by: Zong Li <zong@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The address of external symbols will locate more than 32-bit offset
in 64-bit kernel with sv39 or sv48 virtual addressing.
Module loader emits the GOT and PLT entries for data symbols and
function symbols respectively.
The PLT entry is a trampoline code for jumping to the 64-bit
real address. The GOT entry is just the data symbol address.
Signed-off-by: Zong Li <zong@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
In walk_stackframe, the pc now receives the address from calling
ftrace_graph_ret_addr instead of manual calculation.
Note that the original calculation,
pc = frame->ra - 4
is buggy when the instruction at the return address happened to be a
compressed inst. But since it is not a critical part of ftrace, it is
ignored for now to ease the review process.
Cc: Greentime Hu <greentime@andestech.com>
Signed-off-by: Alan Kao <alankao@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Once the function_graph tracer is enabled, a filtered function has the
following call sequence:
* ftracer_caller ==> on/off by ftrace_make_call/ftrace_make_nop
* ftrace_graph_caller
* ftrace_graph_call ==> on/off by ftrace_en/disable_ftrace_graph_caller
* prepare_ftrace_return
Considering the following DYNAMIC_FTRACE_WITH_REGS feature, it would be
more extendable to have a ftrace_graph_caller function, instead of
calling prepare_ftrace_return directly in ftrace_caller.
Cc: Greentime Hu <greentime@andestech.com>
Signed-off-by: Alan Kao <alankao@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
We now have dynamic ftrace with the following added items:
* ftrace_make_call, ftrace_make_nop (in kernel/ftrace.c)
The two functions turn each recorded call site of filtered functions
into a call to ftrace_caller or nops
* ftracce_update_ftrace_func (in kernel/ftrace.c)
turns the nops at ftrace_call into a call to a generic entry for
function tracers.
* ftrace_caller (in kernel/mcount-dyn.S)
The entry where each _mcount call sites calls to once they are
filtered to be traced.
Also, this patch fixes the semantic problems in mcount.S, which will be
treated as only a reference implementation once we have the dynamic
ftrace.
Cc: Greentime Hu <greentime@andestech.com>
Signed-off-by: Alan Kao <alankao@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Using this helper allows us to avoid the in-kernel calls to the
sys_mmap_pgoff() syscall. The ksys_ prefix denotes that this function is
meant as a drop-in replacement for the syscall. In particular, it uses the
same calling convention as sys_mmap_pgoff().
This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-mm@kvack.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
The sbi_ prefix would seem to indicate an SBI interface, and save is not
very specific. After applying this patch, reading head.S makes more sense.
Signed-off-by: Michael Clark <michaeljclark@mac.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Interrupt is allowed during exception handling.
There are warning messages if the kernel enables the configuration
'CONFIG_DEBUG_ATOMIC_SLEEP=y'.
BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:23
in_atomic(): 0, irqs_disabled(): 1, pid: 43, name: ash
CPU: 0 PID: 43 Comm: ash Tainted: G W 4.15.0-rc8-00089-g89ffdae-dirty #17
Call Trace:
[<000000009abb1587>] walk_stackframe+0x0/0x7a
[<00000000d4f3d088>] ___might_sleep+0x102/0x11a
[<00000000b1fd792a>] down_read+0x18/0x28
[<000000000289ec01>] do_page_fault+0x86/0x2f6
[<00000000012441f6>] _do_fork+0x1b4/0x1e0
[<00000000f46c3e3b>] ret_from_syscall+0xa/0xe
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Zong Li <zong@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This tag contains the fixes we'd like to target for the 4.16 merge
window. It's not as much as I was originally hoping to do but between
glibc, the chip, and FOSDEM there just wasn't enough time to get
everything put together. As such, this merge window is essentially just
going to be small changes. This includes mostly cleanups:
* A build fix failure to the audit test cases. RISC-V doesn't have
renameat because the generic syscall ABI moved to renameat2 by the
time of our port. The syscall audit test cases don't understand this,
so I added a trivial fix. This went through mailing list review
during the 4.15 merge window, but nobody has picked it up so I think
it's best to just do this here.
* The removal of our command-line argument processing code. The
"mem_end" stuff was broken and the rest duplicated generic device tree
code. The generic code was already being called.
* Some unused/redundant code has been removed, including
__ARCH_HAVE_MMU, current_pgdir, and the initialization of init_mm.pgd.
* SUM is disabled upon taking a trap, which means that user memory is
protected during traps taking inside copy_{to,from}_user().
* The sptbr CSR has been renamed to satp in C code. We haven't changed
the assembly code in order to maintain compatibility with binutils
2.29, which doesn't understand the new name.
Additionally, we're adding some new features:
* Basic ftrace support, thanks to Alan Kao!
* Support for ZONE_DMA32. This is necessary for all the normal reasons,
but also to deal with a deficiency in the Xilinx PCIe controller we're
using on our FPGA-based systems. While the ZONE_DMA32 addition should
be sufficient for most uses, it doesn't complete the fix for the
Xilinx controller.
* TLB shootdowns now only target the harts where they're necessary,
instead of applying to all harts in the system.
These patches have all been sitting on our linux-next branch for a while
now. Due to time constraints this is all I feel comfortable submitting
during the 4.16 merge window, hopefully we'll do better next time!
-----BEGIN PGP SIGNATURE-----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=cNRH
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-4.16-merge_window' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux
Pull RISC-V updates from Palmer Dabbelt:
"This contains the fixes we'd like to target for the 4.16 merge window.
It's not as much as I was originally hoping to do but between glibc,
the chip, and FOSDEM there just wasn't enough time to get everything
put together. As such, this merge window is essentially just going to
be small changes. This includes mostly cleanups:
- A build fix failure to the audit test cases.
RISC-V doesn't have renameat because the generic syscall ABI moved
to renameat2 by the time of our port. The syscall audit test cases
don't understand this, so I added a trivial fix. This went through
mailing list review during the 4.15 merge window, but nobody has
picked it up so I think it's best to just do this here.
- The removal of our command-line argument processing code. The
"mem_end" stuff was broken and the rest duplicated generic device
tree code. The generic code was already being called.
- Some unused/redundant code has been removed, including
__ARCH_HAVE_MMU, current_pgdir, and the initialization of
init_mm.pgd.
- SUM is disabled upon taking a trap, which means that user memory is
protected during traps taking inside copy_{to,from}_user().
- The sptbr CSR has been renamed to satp in C code. We haven't
changed the assembly code in order to maintain compatibility with
binutils 2.29, which doesn't understand the new name.
Additionally, we're adding some new features:
- Basic ftrace support, thanks to Alan Kao!
- Support for ZONE_DMA32.
This is necessary for all the normal reasons, but also to deal with
a deficiency in the Xilinx PCIe controller we're using on our
FPGA-based systems. While the ZONE_DMA32 addition should be
sufficient for most uses, it doesn't complete the fix for the
Xilinx controller.
- TLB shootdowns now only target the harts where they're necessary,
instead of applying to all harts in the system.
These patches have all been sitting on our linux-next branch for a
while now. Due to time constraints this is all I feel comfortable
submitting during the 4.16 merge window, hopefully we'll do better
next time!"
[ Note to self: "harts" is RISC-V speak for "hardware threads". I had
to look that up. - Linus ]
* tag 'riscv-for-linus-4.16-merge_window' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
riscv: inline set_pgdir into its only caller
riscv: rename sptbr to satp
riscv: don't read back satp in paging_init
riscv: remove the unused current_pgdir function
riscv: add ZONE_DMA32
RISC-V: Limit the scope of TLB shootdowns
riscv: disable SUM in the exception handler
riscv: remove redundant unlikely()
riscv: remove unused __ARCH_HAVE_MMU define
riscv/ftrace: Add basic support
RISC-V: Remove mem_end command line processing
RISC-V: Remove duplicate command-line parsing logic
audit: Avoid build failures on systems without renameat
Pull asm/uaccess.h whack-a-mole from Al Viro:
"It's linux/uaccess.h, damnit... Oh, well - eventually they'll stop
cropping up..."
* 'work.whack-a-mole' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
asm-prototypes.h: use linux/uaccess.h, not asm/uaccess.h
riscv: use linux/uaccess.h, not asm/uaccess.h...
ppc: for put_user() pull linux/uaccess.h, not asm/uaccess.h
satp is the name used by the current privileged spec 1.10, use it
instead of the old name. The most recent release binutils release
(2.29) doesn't know about the satp name yet, so stick to the name from
the previous privileged ISA release and comment on the fact.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This patch allows devices that require memory that can be addressed
using 32-bit addresses to work easily on RISC-V systems. The newly
improved dma-direct ops will tap into this pool automatically for
32-bit addressing.
Based on an earlier patch from Wesley W. Terpstra.
CC: Wesley W. Terpstra <terpstra@sifive.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The SUM bit is enabled at the beginning of the copy_{to,from}_user and
{get,put}_user routines, and cleared before they return. But these user
copy helper can be interrupted by exceptions, in which case the SUM bit
will remain set, which leads to elevated privileges for the code running
in exception context, as that can now access userspace address space
unconditionally. This frequently happens when the user copy routines
access freshly allocated user memory that hasn't been faulted in, and a
pagefault needs to be taken before the user copy routines can continue.
Fix this by unconditionally clearing SUM when the exception handler is
called - the restore code will automatically restore it based on the
saved value.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
IS_ERR_VALUE() already implies unlikely(), so it can be omitted.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This patch contains basic ftrace support for RV64I platform.
Specifically, function tracer (HAVE_FUNCTION_TRACER), function graph
tracer (HAVE_FUNCTION_GRAPH_TRACER), and a frame pointer test
(HAVE_FUNCTION_GRAPH_FP_TEST) are implemented following the
instructions in Documentation/trace/ftrace-design.txt.
Note that the functions in both ftrace.c and setup.c should not be
hooked with the compiler's -pg option: to prevent infinite self-
referencing for the former, and to ignore early setup stuff for the
latter.
Signed-off-by: Alan Kao <alankao@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This is just some cruft left over from before the port converted to
device tree. The right way to handle memory regions is to specify them
in the device tree, which BBL (our simplest bootloader) is already
capable of doing. This patch simply removes the cruft.
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
builtin_cmdline handling is present in drivers/of/fdt.c so the
duplicate logic in arch/riscv/setup.c results in duplication of
the builtin command line. e.g. CONFIG_CMDLINE="root=/dev/vda ro"
gets appended twice and gives "root=/dev/vda ro root=/dev/vda ro"
Before this patch:
[ 0.000000] Kernel command line: root=/dev/vda ro root=/dev/vda ro
After this patch:
[ 0.000000] Kernel command line: root=/dev/vda ro
Signed-off-by: Michael Clark <mjc@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
We were hoping to avoid making this visible to userspace, but it looks
like we're going to have to because QEMU's user-mode emulation doesn't
want to emulate a vDSO. Having vDSO-only system calls was a bit
unothodox anyway, so I think in this case it's OK to just make the
actual system call number public.
This patch simply moves the definition of __NR_riscv_flush_icache
availiable to userspace, which results in the deletion of the now empty
vdso-syscalls.h.
Changes since v1:
* I've moved the definition into uapi/asm/syscalls.h rathen than
uapi/asm/unistd.h. This allows me to keep asm/unistd.h, so we can
keep the syscall table macros sane.
* As a side effect of the above, this no longer disables all system
calls on RISC-V. Whoops!
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This is code that probably should never have made it into the kernel in
the first place: it depends on a driver that hadn't been reviewed yet.
During the HVC_SBI_RISCV review process a better way of doing this was
suggested, but that means this code is defunct. It's compile-time
disabled in 4.15 because the driver isn't in, so I think it's safe to
just remove this for now.
CC: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
In the current code, there is a ! logical NOT where a bitwise ~ NOT was
intended. It means that we never return -EINVAL.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Olaf said: Here's a short series of patches that produces a working
allmodconfig. Would be nice to see them go in so we can add build
coverage.
I've dropped patches 8 and 10 from the original set:
* [PATCH 08/10] (RISC-V: Set __ARCH_WANT_RENAMEAT to pick up generic
version) has a better fix that I've sent out for review, we don't want
renameat.
* [PATCH 10/10] (input: joystick: riscv has get_cycles) has already been
taken into Dmitry Torokhov's tree.
We used to have some cmpxchg syscalls. They're no longer there, so we
no longer need the include.
CC: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Despite RISC-V having a direct 'fence.i' instruction available to
userspace (which we can't trap!), that's not actually viable when
running on Linux because the kernel might schedule a process on another
hart. There is no way for userspace to handle this without invoking the
kernel (as it doesn't know the thread->hart mappings), so we've defined
a RISC-V specific system call to flush the instruction cache.
This patch adds both a system call and a VDSO entry. If possible, we'd
like to avoid having the system call be considered part of the
user-facing ABI and instead restrict that to the VDSO entry -- both just
in general to avoid having additional user-visible ABI to maintain, and
because we'd prefer that users just call the VDSO entry because there
might be a better way to do this in the future (ie, one that doesn't
require entering the kernel).
Signed-off-by: Andrew Waterman <andrew@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
The RISC-V ISA allows for instruction caches that are not coherent WRT
stores, even on a single hart. As a result, we need to explicitly flush
the instruction cache whenever marking a dirty page as executable in
order to preserve the correct system behavior.
Local instruction caches aren't that scary (our implementations actually
flush the cache, but RISC-V is defined to allow higher-performance
implementations to exist), but RISC-V defines no way to perform an
instruction cache shootdown. When explicitly asked to do so we can
shoot down remote instruction caches via an IPI, but this is a bit on
the slow side.
Instead of requiring an IPI to all harts whenever marking a page as
executable, we simply flush the currently running harts. In order to
maintain correct behavior, we additionally mark every other hart as
needing a deferred instruction cache which will be taken before anything
runs on it.
Signed-off-by: Andrew Waterman <andrew@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Fixes the following on allmodconfig build:
profile.c:(.text+0x3e4): undefined reference to `setup_profiling_timer'
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
These are the ones needed by current allmodconfig, so add them instead
of everything other architectures are exporting -- the rest can be
added on demand later if needed.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Needed by some modules (exported by other architectures).
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
For now these are just placeholders that execute the syscall. We will
later optimize them to avoid kernel crossings, but we'd like to have the
VDSO entries from the first released kernel version to make the ABI
simpler.
Signed-off-by: Andrew Waterman <andrew@sifive.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
This patch contains all the build infrastructure that actually enables
the RISC-V port. This includes Makefiles, linker scripts, and Kconfig
files. It also contains the only top-level change, which adds RISC-V to
the list of architectures that need a sed run to produce the ARCH
variable when building locally.
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
This patch contains code that is in some way visible to the user:
including via system calls, the VDSO, module loading and signal
handling. It also contains some generic code that is ABI visible.
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
This patch contains the implementation of tasks on RISC-V, most of which
is involved in task switching.
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
This patch contains code that is more specific to the RISC-V ISA than it
is to Linux. It contains string and math operations, C wrappers for
various assembly instructions, stack walking code, and uaccess.
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
This contains the various __init C functions, the initial assembly
kernel entry point, and the code to reset the system. When a file was
init-related this patch contains the entire file.
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
