Commit Graph

783 Commits

Author SHA1 Message Date
Chaitanya Kulkarni
654a3667df block: return NULL in blk_alloc_queue() on error
This patch fixes follwoing warning:

block/blk-core.c: In function ‘blk_alloc_queue’:
block/blk-core.c:558:10: warning: returning ‘int’ from a function with return type ‘struct request_queue *’ makes pointer from integer without a cast [-Wint-conversion]
   return -EINVAL;

Fixes: 3d745ea5b0 ("block: simplify queue allocation")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-29 10:08:26 -06:00
Christoph Hellwig
3d745ea5b0 block: simplify queue allocation
Current make_request based drivers use either blk_alloc_queue_node or
blk_alloc_queue to allocate a queue, and then set up the make_request_fn
function pointer and a few parameters using the blk_queue_make_request
helper.  Simplify this by passing the make_request pointer to
blk_alloc_queue, and while at it merge the _node variant into the main
helper by always passing a node_id, and remove the superfluous gfp_mask
parameter.  A lower-level __blk_alloc_queue is kept for the blk-mq case.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-27 10:23:43 -06:00
Konstantin Khlebnikov
8cd5b8fc00 block/diskstats: replace time_in_queue with sum of request times
Column "time_in_queue" in diskstats is supposed to show total waiting time
of all requests. I.e. value should be equal to the sum of times from other
columns. But this is not true, because column "time_in_queue" is counted
separately in jiffies rather than in nanoseconds as other times.

This patch removes redundant counter for "time_in_queue" and shows total
time of read, write, discard and flush requests.

Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-25 08:49:12 -06:00
Konstantin Khlebnikov
2b8bd42361 block/diskstats: more accurate approximation of io_ticks for slow disks
Currently io_ticks is approximated by adding one at each start and end of
requests if jiffies counter has changed. This works perfectly for requests
shorter than a jiffy or if one of requests starts/ends at each jiffy.

If disk executes just one request at a time and they are longer than two
jiffies then only first and last jiffies will be accounted.

Fix is simple: at the end of request add up into io_ticks jiffies passed
since last update rather than just one jiffy.

Example: common HDD executes random read 4k requests around 12ms.

fio --name=test --filename=/dev/sdb --rw=randread --direct=1 --runtime=30 &
iostat -x 10 sdb

Note changes of iostat's "%util" 8,43% -> 99,99% before/after patch:

Before:

Device:         rrqm/s   wrqm/s     r/s     w/s    rkB/s    wkB/s avgrq-sz avgqu-sz   await r_await w_await  svctm  %util
sdb               0,00     0,00   82,60    0,00   330,40     0,00     8,00     0,96   12,09   12,09    0,00   1,02   8,43

After:

Device:         rrqm/s   wrqm/s     r/s     w/s    rkB/s    wkB/s avgrq-sz avgqu-sz   await r_await w_await  svctm  %util
sdb               0,00     0,00   82,50    0,00   330,00     0,00     8,00     1,00   12,10   12,10    0,00  12,12  99,99

Now io_ticks does not loose time between start and end of requests, but
for queue-depth > 1 some I/O time between adjacent starts might be lost.

For load estimation "%util" is not as useful as average queue length,
but it clearly shows how often disk queue is completely empty.

Fixes: 5b18b5a737 ("block: delete part_round_stats and switch to less precise counting")
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-25 08:49:08 -06:00
Guoqing Jiang
361301a222 block: cleanup for _blk/blk_rq_prep_clone
Both cmd and sense had been moved to scsi_request, so remove
the related comments to avoid confusion.

And as Bart suggested, move _blk_rq_prep_clone into the only
caller (blk_rq_prep_clone).

Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-12 07:42:54 -06:00
Guoqing Jiang
fc4cc77210 block: remove redundant setting of QUEUE_FLAG_DYING
Previously, blk_cleanup_queue has called blk_set_queue_dying to set the
flag, no need to do it again.

Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-12 07:42:54 -06:00
Guoqing Jiang
35ed78b32c block: use bio_{wouldblock,io}_error in direct_make_request
Use the two functions to simplify code.

Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-12 07:42:54 -06:00
Guoqing Jiang
0d72031820 block: fix comment for blk_cloned_rq_check_limits
Since the later description mentioned "checked against the new queue
limits", so make the change to avoid confusion.

Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-12 07:42:54 -06:00
Daniel Wagner
e959e5405f block: Remove used kblockd_schedule_work_on()
Commit ee63cfa7fc ("block: add kblockd_schedule_work_on()")
introduced the helper in 2016. Remove it because since then no caller
was added.

Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-03-02 07:17:31 -07:00
Roman Penyaev
c58c1f8343 block: end bio with BLK_STS_AGAIN in case of non-mq devs and REQ_NOWAIT
Non-mq devs do not honor REQ_NOWAIT so give a chance to the caller to repeat
request gracefully on -EAGAIN error.

The problem is well reproduced using io_uring:

   mkfs.ext4 /dev/ram0
   mount /dev/ram0 /mnt

   # Preallocate a file
   dd if=/dev/zero of=/mnt/file bs=1M count=1

   # Start fio with io_uring and get -EIO
   fio --rw=write --ioengine=io_uring --size=1M --direct=1 --name=job --filename=/mnt/file

Signed-off-by: Roman Penyaev <rpenyaev@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-17 09:01:43 -07:00
Linus Torvalds
f1fcd7786e for-linus-20191212
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl3y54EQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpqJuD/93LZmzS5UEWrNLkRaAaCyAy40MPxuXRZEp
 42yk7cvAT4OcCr+W6nkAgG6IHGRXOz8QvOzt0P5/HfugpNlB2oz5a/6+TiTtcZTt
 YNt0Z4yuBMU5SXIIxc3lUMcJGxslzOr+L+9ZXD4u5UqIdG1fSrECAexSCrlmmTwu
 Fx02TakDc/bbUYDfLAQD1+/Z066rp1ZWDkjXqA4kUvbFzt8F7qEOc1Evq47SuR7d
 Iw0bM3LVASXwTq2lRc1bFFL2glku6wwkccjwdyjSrQmK4+8LhF396fQGtXuj0Mrs
 OzuWhaOoGhan7dpj1D8e4tqugflQy9rv9bcy6Z9PjBY+VauuFdgPr3iFcwPaPbXm
 17ir4y7xJJxXlhZl/Bn06KIB2h+nLWDIaundFys5JnMmTiZvWIgSJ6Q3gWtMxgfH
 zWZLMw/UtRAmjHhLqvGsMaBTfgKX5ATpMbfGeZeXheVtVaOgGTunXunT56o7oRHB
 q4XWZqbydsYyHBUhgSzhBr03i67wbotxtebqg9VZ0UD8XM4iM8Kor/DleK03oUqD
 DsltKF66NAGNeOcV3TNzJuXHyF6S/vZdO7JdFHY29+pdljoTj5GB88+W9CbhwQRe
 WiKVpq7sAe/bh0wtqrD+QCByjSNSVU62kVgRhfqms47804j/vNqNvOKaC5UWTd0I
 2LG4jfSbeg==
 =hmxJ
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-20191212' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:

 - stable fix for the bi_size overflow. Not a corruption issue, but a
   case wher we could merge but disallowed (Andreas)

 - NVMe pull request via Keith, with various fixes.

 - MD pull request from Song.

 - Merge window regression fix for the rq passthrough stats (Logan)

 - Remove unused blkcg_drain_queue() function (Guoqing)

* tag 'for-linus-20191212' of git://git.kernel.dk/linux-block:
  blk-cgroup: remove blkcg_drain_queue
  block: fix NULL pointer dereference in account statistics with IDE
  md: make sure desc_nr less than MD_SB_DISKS
  md: raid1: check rdev before reference in raid1_sync_request func
  raid5: need to set STRIPE_HANDLE for batch head
  block: fix "check bi_size overflow before merge"
  nvme/pci: Fix read queue count
  nvme/pci Limit write queue sizes to possible cpus
  nvme/pci: Fix write and poll queue types
  nvme/pci: Remove last_cq_head
  nvme: Namepace identification descriptor list is optional
  nvme-fc: fix double-free scenarios on hw queues
  nvme: else following return is not needed
  nvme: add error message on mismatching controller ids
  nvme_fc: add module to ops template to allow module references
  nvmet-loop: Avoid preallocating big SGL for data
  nvme-fc: Avoid preallocating big SGL for data
  nvme-rdma: Avoid preallocating big SGL for data
2019-12-13 14:27:19 -08:00
Logan Gunthorpe
ecb6186cf7 block: fix NULL pointer dereference in account statistics with IDE
The IDE driver creates some passthru requests which never get
submitted to the block layer in such a way that blk_account_io_start()
gets called. However, the driver still calls __blk_mq_end_request() in
ide_end_rq() which will call blk_account_io_completion() which tries
to dereferences req->part which is never set. See ide_prep_sense() for
an example of where these requests come from.

To fix this, blk_account_io_completion() and blk_account_io_done()
should do nothing if req->part is not set.

The back trace of this bug is:

    BUG: kernel NULL pointer dereference, address: 000002ac
    #PF: supervisor write access in kernel mode
    #PF: error_code(0x0002) - not-present page
    *pde = 00000000
    Oops: 0002 [#1]
    CPU: 0 PID: 237 Comm: kworker/0:1H Not tainted
    5.4.0-rc2-00011-g48d9b0d43105e #1
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1
    04/01/2014
    Workqueue: kblockd drive_rq_insert_work
    EIP: blk_account_io_completion+0x7a/0xf0
    Code: 89 54 24 08 31 d2 89 4c 24 04 31 c9 c7 04 24 02 00 00 00 c1 ee
    09 e8 f5 21 a6 ff e8 70 5c a7 ff 8b 53 60 8d 04 bd 00 00 00 00 <01> b4
    02 ac 02 00 00 8b 9a 88 02 00 00 85 db 74 11 85 d2 74 51 8b
    EAX: 00000000 EBX: f5b80000 ECX: 00000000 EDX: 00000000
    ESI: 00000000 EDI: 00000000 EBP: f3031e70 ESP: f3031e54
    DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 EFLAGS: 00010046
    CR0: 80050033 CR2: 000002ac CR3: 03c25000 CR4: 000406d0
    Call Trace:
     <IRQ>
      blk_update_request+0x85/0x420
      ide_end_rq+0x38/0xa0
      ide_complete_rq+0x3d/0x70
      cdrom_newpc_intr+0x258/0xba0
      ide_intr+0x135/0x250
      __handle_irq_event_percpu+0x3e/0x250
      handle_irq_event_percpu+0x1f/0x50
      handle_irq_event+0x32/0x60
      handle_level_irq+0x6c/0x110
      handle_irq+0x72/0xa0
      </IRQ>
      do_IRQ+0x45/0xad
      common_interrupt+0x115/0x11c

Fixes: 48d9b0d431 ("block: account statistics for passthrough requests")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-12-12 08:12:50 -07:00
Pankaj Bharadiya
c593642c8b treewide: Use sizeof_field() macro
Replace all the occurrences of FIELD_SIZEOF() with sizeof_field() except
at places where these are defined. Later patches will remove the unused
definition of FIELD_SIZEOF().

This patch is generated using following script:

EXCLUDE_FILES="include/linux/stddef.h|include/linux/kernel.h"

git grep -l -e "\bFIELD_SIZEOF\b" | while read file;
do

	if [[ "$file" =~ $EXCLUDE_FILES ]]; then
		continue
	fi
	sed -i  -e 's/\bFIELD_SIZEOF\b/sizeof_field/g' $file;
done

Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Link: https://lore.kernel.org/r/20190924105839.110713-3-pankaj.laxminarayan.bharadiya@intel.com
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: David Miller <davem@davemloft.net> # for net
2019-12-09 10:36:44 -08:00
Damien Le Moal
5eac3eb30c block: Remove partition support for zoned block devices
No known partitioning tool supports zoned block devices, especially the
host managed flavor with strong sequential write constraints.
Furthermore, there are also no known user nor use cases for partitioned
zoned block devices.

This patch removes partition device creation for zoned block devices,
which allows simplifying the processing of zone commands for zoned
block devices. A warning is added if a partition table is found on the
device.

For report zones operations no zone sector information remapping is
necessary anymore, simplifying the code. Of note is that remapping of
zone reports for DM targets is still necessary as done by
dm_remap_zone_report().

Similarly, remaping of a zone reset bio is not necessary anymore.
Testing for the applicability of the zone reset all request also becomes
simpler and only needs to check that the number of sectors of the
requested zone range is equal to the disk capacity.

Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-12 19:11:57 -07:00
Ajay Joshi
6c1b1da58f block: add zone open, close and finish operations
Zoned block devices (ZBC and ZAC devices) allow an explicit control
over the condition (state) of zones. The operations allowed are:
* Open a zone: Transition to open condition to indicate that a zone will
  actively be written
* Close a zone: Transition to closed condition to release the drive
  resources used for writing to a zone
* Finish a zone: Transition an open or closed zone to the full
  condition to prevent write operations

To enable this control for in-kernel zoned block device users, define
the new request operations REQ_OP_ZONE_OPEN, REQ_OP_ZONE_CLOSE
and REQ_OP_ZONE_FINISH as well as the generic function
blkdev_zone_mgmt() for submitting these operations on a range of zones.
This results in blkdev_reset_zones() removal and replacement with this
new zone magement function. Users of blkdev_reset_zones() (f2fs and
dm-zoned) are updated accordingly.

Contains contributions from Matias Bjorling, Hans Holmberg,
Dmitry Fomichev, Keith Busch, Damien Le Moal and Christoph Hellwig.

Reviewed-by: Javier González <javier@javigon.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ajay Joshi <ajay.joshi@wdc.com>
Signed-off-by: Matias Bjorling <matias.bjorling@wdc.com>
Signed-off-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-11-07 06:31:48 -07:00
Bart Van Assche
73f1c77e65 block: Reduce sysfs_lock locking inside blk_cleanup_queue()
Since blk_cleanup_queue() is called after blk_unregister_queue() and
since that last function removes all sysfs attributes, serializing
any code in blk_cleanup_queue() against sysfs callback methods nor against
I/O scheduler changes is necessary. Hence remove the syfs_lock locking
calls from the start of blk_cleanup_queue().

Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-07 08:31:59 -06:00
Bart Van Assche
bae85c156f block: Remove "dying" checks from sysfs callbacks
Block drivers must call del_gendisk() before blk_cleanup_queue().
del_gendisk() calls kobject_del() and kobject_del() waits until any
ongoing sysfs callback functions have finished. In other words, the
sysfs callback functions won't be called for a queue in the dying
state. Hence remove the "dying" checks from the sysfs callback
functions.

Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-10-07 08:31:59 -06:00
Max Gurtovoy
54d4e6ab91 block: centralize PI remapping logic to the block layer
Currently t10_pi_prepare/t10_pi_complete functions are called during the
NVMe and SCSi layers command preparetion/completion, but their actual
place should be the block layer since T10-PI is a general data integrity
feature that is used by block storage protocols. Introduce .prepare_fn
and .complete_fn callbacks within the integrity profile that each type
can implement according to its needs.

Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Suggested-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>

Fixed to not call queue integrity functions if BLK_DEV_INTEGRITY
isn't defined in the config.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-17 20:03:49 -06:00
Tejun Heo
d3e65ffff6 block/rq_qos: add rq_qos_merge()
Add a merge hook for rq_qos.  This will be used by io.weight.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-28 21:17:05 -06:00
Ming Lei
cecf5d87ff block: split .sysfs_lock into two locks
The kernfs built-in lock of 'kn->count' is held in sysfs .show/.store
path. Meantime, inside block's .show/.store callback, q->sysfs_lock is
required.

However, when mq & iosched kobjects are removed via
blk_mq_unregister_dev() & elv_unregister_queue(), q->sysfs_lock is held
too. This way causes AB-BA lock because the kernfs built-in lock of
'kn-count' is required inside kobject_del() too, see the lockdep warning[1].

On the other hand, it isn't necessary to acquire q->sysfs_lock for
both blk_mq_unregister_dev() & elv_unregister_queue() because
clearing REGISTERED flag prevents storing to 'queue/scheduler'
from being happened. Also sysfs write(store) is exclusive, so no
necessary to hold the lock for elv_unregister_queue() when it is
called in switching elevator path.

So split .sysfs_lock into two: one is still named as .sysfs_lock for
covering sync .store, the other one is named as .sysfs_dir_lock
for covering kobjects and related status change.

sysfs itself can handle the race between add/remove kobjects and
showing/storing attributes under kobjects. For switching scheduler
via storing to 'queue/scheduler', we use the queue flag of
QUEUE_FLAG_REGISTERED with .sysfs_lock for avoiding the race, then
we can avoid to hold .sysfs_lock during removing/adding kobjects.

[1]  lockdep warning
    ======================================================
    WARNING: possible circular locking dependency detected
    5.3.0-rc3-00044-g73277fc75ea0 #1380 Not tainted
    ------------------------------------------------------
    rmmod/777 is trying to acquire lock:
    00000000ac50e981 (kn->count#202){++++}, at: kernfs_remove_by_name_ns+0x59/0x72

    but task is already holding lock:
    00000000fb16ae21 (&q->sysfs_lock){+.+.}, at: blk_unregister_queue+0x78/0x10b

    which lock already depends on the new lock.

    the existing dependency chain (in reverse order) is:

    -> #1 (&q->sysfs_lock){+.+.}:
           __lock_acquire+0x95f/0xa2f
           lock_acquire+0x1b4/0x1e8
           __mutex_lock+0x14a/0xa9b
           blk_mq_hw_sysfs_show+0x63/0xb6
           sysfs_kf_seq_show+0x11f/0x196
           seq_read+0x2cd/0x5f2
           vfs_read+0xc7/0x18c
           ksys_read+0xc4/0x13e
           do_syscall_64+0xa7/0x295
           entry_SYSCALL_64_after_hwframe+0x49/0xbe

    -> #0 (kn->count#202){++++}:
           check_prev_add+0x5d2/0xc45
           validate_chain+0xed3/0xf94
           __lock_acquire+0x95f/0xa2f
           lock_acquire+0x1b4/0x1e8
           __kernfs_remove+0x237/0x40b
           kernfs_remove_by_name_ns+0x59/0x72
           remove_files+0x61/0x96
           sysfs_remove_group+0x81/0xa4
           sysfs_remove_groups+0x3b/0x44
           kobject_del+0x44/0x94
           blk_mq_unregister_dev+0x83/0xdd
           blk_unregister_queue+0xa0/0x10b
           del_gendisk+0x259/0x3fa
           null_del_dev+0x8b/0x1c3 [null_blk]
           null_exit+0x5c/0x95 [null_blk]
           __se_sys_delete_module+0x204/0x337
           do_syscall_64+0xa7/0x295
           entry_SYSCALL_64_after_hwframe+0x49/0xbe

    other info that might help us debug this:

     Possible unsafe locking scenario:

           CPU0                    CPU1
           ----                    ----
      lock(&q->sysfs_lock);
                                   lock(kn->count#202);
                                   lock(&q->sysfs_lock);
      lock(kn->count#202);

     *** DEADLOCK ***

    2 locks held by rmmod/777:
     #0: 00000000e69bd9de (&lock){+.+.}, at: null_exit+0x2e/0x95 [null_blk]
     #1: 00000000fb16ae21 (&q->sysfs_lock){+.+.}, at: blk_unregister_queue+0x78/0x10b

    stack backtrace:
    CPU: 0 PID: 777 Comm: rmmod Not tainted 5.3.0-rc3-00044-g73277fc75ea0 #1380
    Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS ?-20180724_192412-buildhw-07.phx4
    Call Trace:
     dump_stack+0x9a/0xe6
     check_noncircular+0x207/0x251
     ? print_circular_bug+0x32a/0x32a
     ? find_usage_backwards+0x84/0xb0
     check_prev_add+0x5d2/0xc45
     validate_chain+0xed3/0xf94
     ? check_prev_add+0xc45/0xc45
     ? mark_lock+0x11b/0x804
     ? check_usage_forwards+0x1ca/0x1ca
     __lock_acquire+0x95f/0xa2f
     lock_acquire+0x1b4/0x1e8
     ? kernfs_remove_by_name_ns+0x59/0x72
     __kernfs_remove+0x237/0x40b
     ? kernfs_remove_by_name_ns+0x59/0x72
     ? kernfs_next_descendant_post+0x7d/0x7d
     ? strlen+0x10/0x23
     ? strcmp+0x22/0x44
     kernfs_remove_by_name_ns+0x59/0x72
     remove_files+0x61/0x96
     sysfs_remove_group+0x81/0xa4
     sysfs_remove_groups+0x3b/0x44
     kobject_del+0x44/0x94
     blk_mq_unregister_dev+0x83/0xdd
     blk_unregister_queue+0xa0/0x10b
     del_gendisk+0x259/0x3fa
     ? disk_events_poll_msecs_store+0x12b/0x12b
     ? check_flags+0x1ea/0x204
     ? mark_held_locks+0x1f/0x7a
     null_del_dev+0x8b/0x1c3 [null_blk]
     null_exit+0x5c/0x95 [null_blk]
     __se_sys_delete_module+0x204/0x337
     ? free_module+0x39f/0x39f
     ? blkcg_maybe_throttle_current+0x8a/0x718
     ? rwlock_bug+0x62/0x62
     ? __blkcg_punt_bio_submit+0xd0/0xd0
     ? trace_hardirqs_on_thunk+0x1a/0x20
     ? mark_held_locks+0x1f/0x7a
     ? do_syscall_64+0x4c/0x295
     do_syscall_64+0xa7/0x295
     entry_SYSCALL_64_after_hwframe+0x49/0xbe
    RIP: 0033:0x7fb696cdbe6b
    Code: 73 01 c3 48 8b 0d 1d 20 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 008
    RSP: 002b:00007ffec9588788 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
    RAX: ffffffffffffffda RBX: 0000559e589137c0 RCX: 00007fb696cdbe6b
    RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000559e58913828
    RBP: 0000000000000000 R08: 00007ffec9587701 R09: 0000000000000000
    R10: 00007fb696d4eae0 R11: 0000000000000206 R12: 00007ffec95889b0
    R13: 00007ffec95896b3 R14: 0000559e58913260 R15: 0000559e589137c0

Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-27 10:40:20 -06:00
Junxiao Bi
988721db93 block: remove struct request_queue queue_head
The dispatch list is not used any more, as the legacy block IO stack
has been removed.

Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-19 08:55:10 -06:00
Johannes Weiner
b8e24a9300 block: annotate refault stalls from IO submission
psi tracks the time tasks wait for refaulting pages to become
uptodate, but it does not track the time spent submitting the IO. The
submission part can be significant if backing storage is contended or
when cgroup throttling (io.latency) is in effect - a lot of time is
spent in submit_bio(). In that case, we underreport memory pressure.

Annotate submit_bio() to account submission time as memory stall when
the bio is reading userspace workingset pages.

Tested-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-14 08:50:01 -06:00
Chaitanya Kulkarni
6e33dbf280 blk-zoned: implement REQ_OP_ZONE_RESET_ALL
This implements REQ_OP_ZONE_RESET_ALL as a special case of the block
device zone reset operations where we just simply issue bio with the
newly introduced req op.

We issue this req op when the number of sectors is equal to the device's
partition's number of sectors and device has no partitions.

We also add support so that blk_op_str() can print the new reset-all
zone operation.

This patch also adds a generic make request check for newly
introduced REQ_OP_ZONE_RESET_ALL req_opf. We simply return error
when queue is zoned and reset-all flag is not set for
REQ_OP_ZONE_RESET_ALL.

Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-04 21:41:29 -06:00
Bart Van Assche
67ed8b7386 block: Fix a comment in blk_cleanup_queue()
Change a reference to the legacy block layer into a reference to blk-mq.

Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: James Smart <james.smart@broadcom.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Jianchao Wang <jianchao.w.wang@oracle.com>
Cc: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-04 21:41:29 -06:00
Damien Le Moal
b49773e7bc block: Disable write plugging for zoned block devices
Simultaneously writing to a sequential zone of a zoned block device
from multiple contexts requires mutual exclusion for BIO issuing to
ensure that writes happen sequentially. However, even for a well
behaved user correctly implementing such synchronization, BIO plugging
may interfere and result in BIOs from the different contextx to be
reordered if plugging is done outside of the mutual exclusion section,
e.g. the plug was started by a function higher in the call chain than
the function issuing BIOs.

         Context A                     Context B

   | blk_start_plug()
   | ...
   | seq_write_zone()
     | mutex_lock(zone)
     | bio-0->bi_iter.bi_sector = zone->wp
     | zone->wp += bio_sectors(bio-0)
     | submit_bio(bio-0)
     | bio-1->bi_iter.bi_sector = zone->wp
     | zone->wp += bio_sectors(bio-1)
     | submit_bio(bio-1)
     | mutex_unlock(zone)
     | return
   | -----------------------> | seq_write_zone()
  				| mutex_lock(zone)
     				| bio-2->bi_iter.bi_sector = zone->wp
     				| zone->wp += bio_sectors(bio-2)
				| submit_bio(bio-2)
				| mutex_unlock(zone)
   | <------------------------- |
   | blk_finish_plug()

In the above example, despite the mutex synchronization ensuring the
correct BIO issuing order 0, 1, 2, context A BIOs 0 and 1 end up being
issued after BIO 2 of context B, when the plug is released with
blk_finish_plug().

While this problem can be addressed using the blk_flush_plug_list()
function (in the above example, the call must be inserted before the
zone mutex lock is released), a simple generic solution in the block
layer avoid this additional code in all zoned block device user code.
The simple generic solution implemented with this patch is to introduce
the internal helper function blk_mq_plug() to access the current
context plug on BIO submission. This helper returns the current plug
only if the target device is not a zoned block device or if the BIO to
be plugged is not a write operation. Otherwise, the caller context plug
is ignored and NULL returned, resulting is all writes to zoned block
device to never be plugged.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-10 14:18:01 -06:00
Tejun Heo
d3f77dfdc7 blkcg: implement REQ_CGROUP_PUNT
When a shared kthread needs to issue a bio for a cgroup, doing so
synchronously can lead to priority inversions as the kthread can be
trapped waiting for that cgroup.  This patch implements
REQ_CGROUP_PUNT flag which makes submit_bio() punt the actual issuing
to a dedicated per-blkcg work item to avoid such priority inversions.

This will be used to fix priority inversions in btrfs compression and
should be generally useful as we grow filesystem support for
comprehensive IO control.

Cc: Chris Mason <clm@fb.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-10 09:00:57 -06:00
Josef Bacik
b554db147f block: init flush rq ref count to 1
We discovered a problem in newer kernels where a disconnect of a NBD
device while the flush request was pending would result in a hang.  This
is because the blk mq timeout handler does

        if (!refcount_inc_not_zero(&rq->ref))
                return true;

to determine if it's ok to run the timeout handler for the request.
Flush_rq's don't have a ref count set, so we'd skip running the timeout
handler for this request and it would just sit there in limbo forever.

Fix this by always setting the refcount of any request going through
blk_init_rq() to 1.  I tested this with a nbd-server that dropped flush
requests to verify that it hung, and then tested with this patch to
verify I got the timeout as expected and the error handling kicked in.
Thanks,

Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-10 09:00:57 -06:00
Chaitanya Kulkarni
b0e5168a77 block: update print_req_error()
Improve the print_req_error with additional request fields which are
helpful for debugging. Use newly introduced blk_op_str() to print the
REQ_OP_XXX in the string format.

Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-20 13:03:51 -06:00
Chaitanya Kulkarni
e47bc4eda9 block: add centralize REQ_OP_XXX to string helper
In order to centralize the REQ_OP_XXX to string conversion which can be
used in the block layer and different places in the kernel like f2fs,
this patch adds a new helper function along with an array similar to the
one present in the blk-mq-debugfs.c.

We keep this helper functionality centralize under blk-core.c instead of
blk-mq-debugfs.c since blk-core.c is configured using CONFIG_BLOCK and
it will not be dependent on blk-mq-debugfs.c which is configured using
CONFIG_BLK_DEBUG_FS.

Next patch adjusts the code in the blk-mq-debugfs.c with newly
introduced helper.

Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-20 13:03:51 -06:00
Christoph Hellwig
178cc590e5 block: improve print_req_error
Print the calling function instead of print_req_error as a prefix, and
print the operation and op_flags separately instead of the whole field.

Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-20 13:03:51 -06:00
Christoph Hellwig
1aa0a133fb block: mark blk_rq_bio_prep as inline
This function just has a few trivial assignments, has two callers with
one of them being in the fastpath.

Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-20 10:29:22 -06:00
Christoph Hellwig
e9cd19c0c1 block: simplify blk_recalc_rq_segments
Return the segement and let the callers assign them, which makes the code
a littler more obvious.  Also pass the request instead of q plus bio
chain, allowing for the use of rq_for_each_bvec.

Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-20 10:29:22 -06:00
Christoph Hellwig
14ccb66b3f block: remove the bi_phys_segments field in struct bio
We only need the number of segments in the blk-mq submission path.
Remove the field from struct bio, and return it from a variant of
blk_queue_split instead of that it can passed as an argument to
those functions that need the value.

This also means we stop recounting segments except for cloning
and partial segments.

To keep the number of arguments in this how path down remove
pointless struct request_queue arguments from any of the functions
that had it and grew a nr_segs argument.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-20 10:29:22 -06:00
Christoph Hellwig
f924cddebc block: remove blk_init_request_from_bio
lightnvm should have never used this function, as it is sending
passthrough requests, so switch it to blk_rq_append_bio like all the
other passthrough request users.  Inline blk_init_request_from_bio into
the only remaining caller.

Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Javier González <javier@javigon.com>
Reviewed-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-20 10:29:22 -06:00
Christoph Hellwig
0c8cf8c2a5 block: initialize the write priority in blk_rq_bio_prep
The priority field also makes sense for passthrough requests, so
initialize it in blk_rq_bio_prep.

Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-20 10:29:22 -06:00
Pavel Begunkov
3a211b7152 blk-core: Remove blk_end_request*() declarations
Commit a1ce35fa49 ("block: remove dead elevator code")
deleted blk_end_request() and friends, but some declaration are still
left. Purge them.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-20 03:26:19 -06:00
Ming Lei
c3e2219216 block: free sched's request pool in blk_cleanup_queue
In theory, IO scheduler belongs to request queue, and the request pool
of sched tags belongs to the request queue too.

However, the current tags allocation interfaces are re-used for both
driver tags and sched tags, and driver tags is definitely host wide,
and doesn't belong to any request queue, same with its request pool.
So we need tagset instance for freeing request of sched tags.

Meantime, blk_mq_free_tag_set() often follows blk_cleanup_queue() in case
of non-BLK_MQ_F_TAG_SHARED, this way requires that request pool of sched
tags to be freed before calling blk_mq_free_tag_set().

Commit 47cdee29ef ("block: move blk_exit_queue into __blk_release_queue")
moves blk_exit_queue into __blk_release_queue for simplying the fast
path in generic_make_request(), then causes oops during freeing requests
of sched tags in __blk_release_queue().

Fix the above issue by move freeing request pool of sched tags into
blk_cleanup_queue(), this way is safe becasue queue has been frozen and no any
in-queue requests at that time. Freeing sched tags has to be kept in queue's
release handler becasue there might be un-completed dispatch activity
which might refer to sched tags.

Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Christoph Hellwig <hch@lst.de>
Fixes: 47cdee29ef ("block: move blk_exit_queue into __blk_release_queue")
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-06 22:39:39 -06:00
John Pittman
61939b12dc block: print offending values when cloned rq limits are exceeded
While troubleshooting issues where cloned request limits have been
exceeded, it is often beneficial to know the actual values that
have been breached.  Print these values, assisting in ease of
identification of root cause of the breach.

Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: John Pittman <jpittman@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-31 15:12:34 -06:00
Ming Lei
fe2008640a block: don't protect generic_make_request_checks with blk_queue_enter
Now a063057d7c ("block: Fix a race between request queue removal and
the block cgroup controller") has been reverted, and blkcg_exit_queue()
won't be called in blk_cleanup_queue() any more.

So don't need to protect generic_make_request_checks() with
blk_queue_enter(), then the total mess can be cleaned.

37f9579f4c ("blk-mq: Avoid that submitting a bio concurrently with device
removal triggers a crash") is reverted.

Cc: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-29 06:09:11 -06:00
Ming Lei
47cdee29ef block: move blk_exit_queue into __blk_release_queue
Commit 498f6650ae ("block: Fix a race between the cgroup code and
request queue initialization") moves what blk_exit_queue does into
blk_cleanup_queue() for fixing issue caused by changing back
queue lock.

However, after legacy request IO path is killed, driver queue lock
won't be used at all, and there isn't story for changing back
queue lock. Then the issue addressed by Commit 498f6650ae doesn't
exist any more.

So move move blk_exit_queue into __blk_release_queue.

This patch basically reverts the following two commits:

	498f6650ae block: Fix a race between the cgroup code and request queue initialization
	24ecc35853 block: Ensure that a request queue is dissociated from the cgroup controller

Cc: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-29 06:09:09 -06:00
Bob Liu
7996a8b551 blk-mq: fix hang caused by freeze/unfreeze sequence
The following is a description of a hang in blk_mq_freeze_queue_wait().
The hang happens on attempt to freeze a queue while another task does
queue unfreeze.

The root cause is an incorrect sequence of percpu_ref_resurrect() and
percpu_ref_kill() and as a result those two can be swapped:

 CPU#0                         CPU#1
 ----------------              -----------------
 q1 = blk_mq_init_queue(shared_tags)

                                q2 = blk_mq_init_queue(shared_tags):
                                  blk_mq_add_queue_tag_set(shared_tags):
                                    blk_mq_update_tag_set_depth(shared_tags):
				     list_for_each_entry()
                                      blk_mq_freeze_queue(q1)
                                       > percpu_ref_kill()
                                       > blk_mq_freeze_queue_wait()

 blk_cleanup_queue(q1)
  blk_mq_freeze_queue(q1)
   > percpu_ref_kill()
                 ^^^^^^ freeze_depth can't guarantee the order

                                      blk_mq_unfreeze_queue()
                                        > percpu_ref_resurrect()

   > blk_mq_freeze_queue_wait()
                 ^^^^^^ Hang here!!!!

This wrong sequence raises kernel warning:
percpu_ref_kill_and_confirm called more than once on blk_queue_usage_counter_release!
WARNING: CPU: 0 PID: 11854 at lib/percpu-refcount.c:336 percpu_ref_kill_and_confirm+0x99/0xb0

But the most unpleasant effect is a hang of a blk_mq_freeze_queue_wait(),
which waits for a zero of a q_usage_counter, which never happens
because percpu-ref was reinited (instead of being killed) and stays in
PERCPU state forever.

How to reproduce:
 - "insmod null_blk.ko shared_tags=1 nr_devices=0 queue_mode=2"
 - cpu0: python Script.py 0; taskset the corresponding process running on cpu0
 - cpu1: python Script.py 1; taskset the corresponding process running on cpu1

 Script.py:
 ------
 #!/usr/bin/python3

import os
import sys

while True:
    on = "echo 1 > /sys/kernel/config/nullb/%s/power" % sys.argv[1]
    off = "echo 0 > /sys/kernel/config/nullb/%s/power" % sys.argv[1]
    os.system(on)
    os.system(off)
------

This bug was first reported and fixed by Roman, previous discussion:
[1] Message id: 1443287365-4244-7-git-send-email-akinobu.mita@gmail.com
[2] Message id: 1443563240-29306-6-git-send-email-tj@kernel.org
[3] https://patchwork.kernel.org/patch/9268199/

Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Roman Pen <roman.penyaev@profitbricks.com>
Signed-off-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-23 10:25:26 -06:00
Ming Lei
662156641b block: don't drain in-progress dispatch in blk_cleanup_queue()
Now freeing hw queue resource is moved to hctx's release handler,
we don't need to worry about the race between blk_cleanup_queue and
run queue any more.

So don't drain in-progress dispatch in blk_cleanup_queue().

This is basically revert of c2856ae2f3 ("blk-mq: quiesce queue before
freeing queue").

Cc: Dongli Zhang <dongli.zhang@oracle.com>
Cc: James Smart <james.smart@broadcom.com>
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Cc: linux-scsi@vger.kernel.org,
Cc: Martin K . Petersen <martin.petersen@oracle.com>,
Cc: Christoph Hellwig <hch@lst.de>,
Cc: James E . J . Bottomley <jejb@linux.vnet.ibm.com>,
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-04 07:24:11 -06:00
Ming Lei
1b97871b50 blk-mq: move cancel of hctx->run_work into blk_mq_hw_sysfs_release
hctx is always released after requeue is freed.

With holding queue's kobject refcount, it is safe for driver to run queue,
so one run queue might be scheduled after blk_sync_queue() is done.

So moving the cancel of hctx->run_work into blk_mq_hw_sysfs_release()
for avoiding run released queue.

Cc: Dongli Zhang <dongli.zhang@oracle.com>
Cc: James Smart <james.smart@broadcom.com>
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Cc: linux-scsi@vger.kernel.org,
Cc: Martin K . Petersen <martin.petersen@oracle.com>,
Cc: Christoph Hellwig <hch@lst.de>,
Cc: James E . J . Bottomley <jejb@linux.vnet.ibm.com>,
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Tested-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-04 07:24:09 -06:00
Ming Lei
c7e2d94b3d blk-mq: free hw queue's resource in hctx's release handler
Once blk_cleanup_queue() returns, tags shouldn't be used any more,
because blk_mq_free_tag_set() may be called. Commit 45a9c9d909
("blk-mq: Fix a use-after-free") fixes this issue exactly.

However, that commit introduces another issue. Before 45a9c9d909,
we are allowed to run queue during cleaning up queue if the queue's
kobj refcount is held. After that commit, queue can't be run during
queue cleaning up, otherwise oops can be triggered easily because
some fields of hctx are freed by blk_mq_free_queue() in blk_cleanup_queue().

We have invented ways for addressing this kind of issue before, such as:

	8dc765d438 ("SCSI: fix queue cleanup race before queue initialization is done")
	c2856ae2f3 ("blk-mq: quiesce queue before freeing queue")

But still can't cover all cases, recently James reports another such
kind of issue:

	https://marc.info/?l=linux-scsi&m=155389088124782&w=2

This issue can be quite hard to address by previous way, given
scsi_run_queue() may run requeues for other LUNs.

Fixes the above issue by freeing hctx's resources in its release handler, and this
way is safe becasue tags isn't needed for freeing such hctx resource.

This approach follows typical design pattern wrt. kobject's release handler.

Cc: Dongli Zhang <dongli.zhang@oracle.com>
Cc: James Smart <james.smart@broadcom.com>
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Cc: linux-scsi@vger.kernel.org,
Cc: Martin K . Petersen <martin.petersen@oracle.com>,
Cc: Christoph Hellwig <hch@lst.de>,
Cc: James E . J . Bottomley <jejb@linux.vnet.ibm.com>,
Reported-by: James Smart <james.smart@broadcom.com>
Fixes: 45a9c9d909 ("blk-mq: Fix a use-after-free")
Cc: stable@vger.kernel.org
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-04 07:24:05 -06:00
Ming Lei
fbc2a15e34 blk-mq: move cancel of requeue_work into blk_mq_release
With holding queue's kobject refcount, it is safe for driver
to schedule requeue. However, blk_mq_kick_requeue_list() may
be called after blk_sync_queue() is done because of concurrent
requeue activities, then requeue work may not be completed when
freeing queue, and kernel oops is triggered.

So moving the cancel of requeue_work into blk_mq_release() for
avoiding race between requeue and freeing queue.

Cc: Dongli Zhang <dongli.zhang@oracle.com>
Cc: James Smart <james.smart@broadcom.com>
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Cc: linux-scsi@vger.kernel.org,
Cc: Martin K . Petersen <martin.petersen@oracle.com>,
Cc: Christoph Hellwig <hch@lst.de>,
Cc: James E . J . Bottomley <jejb@linux.vnet.ibm.com>,
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-05-04 07:24:04 -06:00
Christoph Hellwig
3dcf60bcb6 block: add SPDX tags to block layer files missing licensing information
Various block layer files do not have any licensing information at all.
Add SPDX tags for the default kernel GPLv2 license to those.

Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-30 16:12:03 -06:00
Bart Van Assche
fd9c40f64c block: Revert v5.0 blk_mq_request_issue_directly() changes
blk_mq_try_issue_directly() can return BLK_STS*_RESOURCE for requests that
have been queued. If that happens when blk_mq_try_issue_directly() is called
by the dm-mpath driver then dm-mpath will try to resubmit a request that is
already queued and a kernel crash follows. Since it is nontrivial to fix
blk_mq_request_issue_directly(), revert the blk_mq_request_issue_directly()
changes that went into kernel v5.0.

This patch reverts the following commits:
* d6a51a97c0 ("blk-mq: replace and kill blk_mq_request_issue_directly") # v5.0.
* 5b7a6f128a ("blk-mq: issue directly with bypass 'false' in blk_mq_sched_insert_requests") # v5.0.
* 7f556a44e6 ("blk-mq: refactor the code of issue request directly") # v5.0.

Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Jianchao Wang <jianchao.w.wang@oracle.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: James Smart <james.smart@broadcom.com>
Cc: Dongli Zhang <dongli.zhang@oracle.com>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: <stable@vger.kernel.org>
Reported-by: Laurence Oberman <loberman@redhat.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Fixes: 7f556a44e6 ("blk-mq: refactor the code of issue request directly") # v5.0.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-05 09:40:46 -06:00
Nikolay Borisov
b5420237ec mm: refactor readahead defines in mm.h
All users of VM_MAX_READAHEAD actually convert it to kbytes and then to
pages. Define the macro explicitly as (SZ_128K / PAGE_SIZE). This
simplifies the expression in every filesystem. Also rename the macro to
VM_READAHEAD_PAGES to properly convey its meaning. Finally remove unused
VM_MIN_READAHEAD

[akpm@linux-foundation.org: fix fs/io_uring.c, per Stephen]
Link: http://lkml.kernel.org/r/20181221144053.24318-1-nborisov@suse.com
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Eric Van Hensbergen <ericvh@gmail.com>
Cc: Latchesar Ionkov <lucho@ionkov.net>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-03-12 10:04:01 -07:00
Tetsuo Handa
2e3c18d0ad block: pass no-op callback to INIT_WORK().
syzbot is hitting flush_work() warning caused by commit 4d43d395fe
("workqueue: Try to catch flush_work() without INIT_WORK().") [1].
Although that commit did not expect INIT_WORK(NULL) case, calling
flush_work() without setting a valid callback should be avoided anyway.
Fix this problem by setting a no-op callback instead of NULL.

[1] https://syzkaller.appspot.com/bug?id=e390366bc48bc82a7c668326e0663be3b91cbd29

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-and-tested-by: syzbot <syzbot+ba2a929dcf8e704c180e@syzkaller.appspotmail.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-30 08:53:20 -07:00
Jens Axboe
947b7ac135 Revert "block: cover another queue enter recursion via BIO_QUEUE_ENTERED"
We can't touch a bio after ->make_request_fn(), for all we know it could
already have been completed by the time this function returns.

This reverts commit 698cef1739.

Reported-by: syzbot+4df6ca820108fd248943@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-01-27 06:35:28 -07:00