The security_show function is not used outside of drivers/nvdimm/dimm_devs.c
and the attribute it is for is also already static. Silence the sparse
warning for this not being declared by making it static. Fixes:
drivers/nvdimm/dimm_devs.c:352:9: warning: symbol 'security_show' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Link: https://lore.kernel.org/r/20230616160925.17687-1-ben.dooks@codethink.co.uk
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
The security_show() function was made global and __weak at some
point to allow overriding it. The override was removed later, but
it remains global, which causes a warning about the missing
declaration:
drivers/nvdimm/dimm_devs.c:352:9: error: no previous prototype for 'security_show'
This is also not an appropriate name for a global symbol in the
kernel, so just make it static again.
Fixes: 15a8348707 ("libnvdimm: Introduce CONFIG_NVDIMM_SECURITY_TEST flag")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20230516201415.556858-3-arnd@kernel.org
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
- CXL RAM region enumeration: instantiate 'struct cxl_region' objects
for platform firmware created memory regions
- CXL RAM region provisioning: complement the existing PMEM region
creation support with RAM region support
- "Soft Reservation" policy change: Online (memory hot-add)
soft-reserved memory (EFI_MEMORY_SP) by default, but still allow for
setting aside such memory for dedicated access via device-dax.
- CXL Events and Interrupts: Takeover CXL event handling from
platform-firmware (ACPI calls this CXL Memory Error Reporting) and
export CXL Events via Linux Trace Events.
- Convey CXL _OSC results to drivers: Similar to PCI, let the CXL
subsystem interrogate the result of CXL _OSC negotiation.
- Emulate CXL DVSEC Range Registers as "decoders": Allow for
first-generation devices that pre-date the definition of the CXL HDM
Decoder Capability to translate the CXL DVSEC Range Registers into
'struct cxl_decoder' objects.
- Set timestamp: Per spec, set the device timestamp in case of hotplug,
or if platform-firwmare failed to set it.
- General fixups: linux-next build issues, non-urgent fixes for
pre-production hardware, unit test fixes, spelling and debug message
improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCY/WYcgAKCRDfioYZHlFs
Z6m3APkBUtiEEm1o8ikdu5llUS1OTLBwqjJDwGMTyf8X/WDXhgD+J2mLsCgARS7X
5IS0RAtefutrW5sQpUucPM7QiLuraAY=
=kOXC
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull Compute Express Link (CXL) updates from Dan Williams:
"To date Linux has been dependent on platform-firmware to map CXL RAM
regions and handle events / errors from devices. With this update we
can now parse / update the CXL memory layout, and report events /
errors from devices. This is a precursor for the CXL subsystem to
handle the end-to-end "RAS" flow for CXL memory. i.e. the flow that
for DDR-attached-DRAM is handled by the EDAC driver where it maps
system physical address events to a field-replaceable-unit (FRU /
endpoint device). In general, CXL has the potential to standardize
what has historically been a pile of memory-controller-specific error
handling logic.
Another change of note is the default policy for handling RAM-backed
device-dax instances. Previously the default access mode was "device",
mmap(2) a device special file to access memory. The new default is
"kmem" where the address range is assigned to the core-mm via
add_memory_driver_managed(). This saves typical users from wondering
why their platform memory is not visible via free(1) and stuck behind
a device-file. At the same time it allows expert users to deploy
policy to, for example, get dedicated access to high performance
memory, or hide low performance memory from general purpose kernel
allocations. This affects not only CXL, but also systems with
high-bandwidth-memory that platform-firmware tags with the
EFI_MEMORY_SP (special purpose) designation.
Summary:
- CXL RAM region enumeration: instantiate 'struct cxl_region' objects
for platform firmware created memory regions
- CXL RAM region provisioning: complement the existing PMEM region
creation support with RAM region support
- "Soft Reservation" policy change: Online (memory hot-add)
soft-reserved memory (EFI_MEMORY_SP) by default, but still allow
for setting aside such memory for dedicated access via device-dax.
- CXL Events and Interrupts: Takeover CXL event handling from
platform-firmware (ACPI calls this CXL Memory Error Reporting) and
export CXL Events via Linux Trace Events.
- Convey CXL _OSC results to drivers: Similar to PCI, let the CXL
subsystem interrogate the result of CXL _OSC negotiation.
- Emulate CXL DVSEC Range Registers as "decoders": Allow for
first-generation devices that pre-date the definition of the CXL
HDM Decoder Capability to translate the CXL DVSEC Range Registers
into 'struct cxl_decoder' objects.
- Set timestamp: Per spec, set the device timestamp in case of
hotplug, or if platform-firwmare failed to set it.
- General fixups: linux-next build issues, non-urgent fixes for
pre-production hardware, unit test fixes, spelling and debug
message improvements"
* tag 'cxl-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (66 commits)
dax/kmem: Fix leak of memory-hotplug resources
cxl/mem: Add kdoc param for event log driver state
cxl/trace: Add serial number to trace points
cxl/trace: Add host output to trace points
cxl/trace: Standardize device information output
cxl/pci: Remove locked check for dvsec_range_allowed()
cxl/hdm: Add emulation when HDM decoders are not committed
cxl/hdm: Create emulated cxl_hdm for devices that do not have HDM decoders
cxl/hdm: Emulate HDM decoder from DVSEC range registers
cxl/pci: Refactor cxl_hdm_decode_init()
cxl/port: Export cxl_dvsec_rr_decode() to cxl_port
cxl/pci: Break out range register decoding from cxl_hdm_decode_init()
cxl: add RAS status unmasking for CXL
cxl: remove unnecessary calling of pci_enable_pcie_error_reporting()
dax/hmem: build hmem device support as module if possible
dax: cxl: add CXL_REGION dependency
cxl: avoid returning uninitialized error code
cxl/pmem: Fix nvdimm registration races
cxl/mem: Fix UAPI command comment
cxl/uapi: Tag commands from cxl_query_cmd()
...
A loop of the form:
while true; do modprobe cxl_pci; modprobe -r cxl_pci; done
...fails with the following crash signature:
BUG: kernel NULL pointer dereference, address: 0000000000000040
[..]
RIP: 0010:cxl_internal_send_cmd+0x5/0xb0 [cxl_core]
[..]
Call Trace:
<TASK>
cxl_pmem_ctl+0x121/0x240 [cxl_pmem]
nvdimm_get_config_data+0xd6/0x1a0 [libnvdimm]
nd_label_data_init+0x135/0x7e0 [libnvdimm]
nvdimm_probe+0xd6/0x1c0 [libnvdimm]
nvdimm_bus_probe+0x7a/0x1e0 [libnvdimm]
really_probe+0xde/0x380
__driver_probe_device+0x78/0x170
driver_probe_device+0x1f/0x90
__device_attach_driver+0x85/0x110
bus_for_each_drv+0x7d/0xc0
__device_attach+0xb4/0x1e0
bus_probe_device+0x9f/0xc0
device_add+0x445/0x9c0
nd_async_device_register+0xe/0x40 [libnvdimm]
async_run_entry_fn+0x30/0x130
...namely that the bottom half of async nvdimm device registration runs
after the CXL has already torn down the context that cxl_pmem_ctl()
needs. Unlike the ACPI NFIT case that benefits from launching multiple
nvdimm device registrations in parallel from those listed in the table,
CXL is already marked PROBE_PREFER_ASYNCHRONOUS. So provide for a
synchronous registration path to preclude this scenario.
Fixes: 21083f5152 ("cxl/pmem: Register 'pmem' / cxl_nvdimm devices")
Cc: <stable@vger.kernel.org>
Reported-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The uevent() callback in struct bus_type should not be modifying the
device that is passed into it, so mark it as a const * and propagate the
function signature changes out into all relevant subsystems that use
this callback.
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230111113018.459199-16-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
nfit_test overrode the security_show() sysfs attribute function in nvdimm
dimm_devs in order to allow testing of security unlock. With the
introduction of CXL security commands, the trick to override
security_show() becomes significantly more complicated. By introdcing a
security flag CONFIG_NVDIMM_SECURITY_TEST, libnvdimm can just toggle the
check via a compile option. In addition the original override can can be
removed from tools/testing/nvdimm/.
The flag will also be used to bypass cpu_cache_invalidate_memregion() when
set in a different commit. This allows testing on QEMU with nfit_test or
cxl_test since cpu_cache_has_invalidate_memregion() checks whether
X86_FEATURE_HYPERVISOR cpu feature flag is set on x86.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166983618758.2734609.18031639517065867138.stgit@djiang5-desk3.ch.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Now that all NVDIMM subsystem locking is validated with custom lock
classes, there is no need for the custom usage of the lockdep_mutex.
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/165055521979.3745911.10751769706032029999.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
CXL is a hotplug bus and arranges for nvdimm devices to be dynamically
discovered and removed. The libnvdimm core manages shutdown of nvdimm
security operations when the device is unregistered. That functionality
is moved to nvdimm_delete() and invoked by the CXL-to-nvdimm glue code.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/162379910271.2993820.2955889139842401250.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Richard reports that the following test:
(while true; do
cat /sys/bus/nd/devices/nmem*/available_slots 2>&1 > /dev/null
done) &
while true; do
for i in $(seq 0 4); do
echo nmem$i > /sys/bus/nd/drivers/nvdimm/bind
done
for i in $(seq 0 4); do
echo nmem$i > /sys/bus/nd/drivers/nvdimm/unbind
done
done
...fails with a crash signature like:
divide error: 0000 [#1] SMP KASAN PTI
RIP: 0010:nd_label_nfree+0x134/0x1a0 [libnvdimm]
[..]
Call Trace:
available_slots_show+0x4e/0x120 [libnvdimm]
dev_attr_show+0x42/0x80
? memset+0x20/0x40
sysfs_kf_seq_show+0x218/0x410
The root cause is that available_slots_show() consults driver-data, but
fails to synchronize against device-unbind setting up a TOCTOU race to
access uninitialized memory.
Validate driver-data under the device-lock.
Fixes: 4d88a97aa9 ("libnvdimm, nvdimm: dimm driver and base libnvdimm device-driver infrastructure")
Cc: <stable@vger.kernel.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Coly Li <colyli@suse.com>
Reported-by: Richard Palethorpe <rpalethorpe@suse.com>
Acked-by: Richard Palethorpe <rpalethorpe@suse.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
'security' attribute displays the security state of an nvdimm.
During normal operation, the nvdimm state maybe one of 'disabled',
'unlocked' or 'locked'. When an admin issues
# ndctl sanitize-dimm nmem0 --overwrite
the attribute is expected to change to 'overwrite' until the overwrite
operation completes.
But tests on our systems show that 'overwrite' is never shown during
the overwrite operation. i.e.
# cat /sys/devices/LNXSYSTM:00/LNXSYBUS:00/ACPI0012:00/ndbus0/nmem0/security
unlocked
the attribute remain 'unlocked' through out the operation, consequently
"ndctl wait-overwrite nmem0" command doesn't wait at all.
The driver tracks the state in 'nvdimm->sec.flags': when the operation
starts, it adds an overwrite bit to the flags; and when the operation
completes, it removes the bit. Hence security_show() should check the
'overwrite' bit first, in order to indicate the actual state when multiple
bits are set in the flags.
Link: https://lore.kernel.org/r/1596494499-9852-2-git-send-email-jane.chu@oracle.com
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Plumb the platform specific backend for the generic libnvdimm firmware
activate interface. Register dimm level operations to arm/disarm
activation, and register bus level operations to report the dynamic
platform-quiesce time relative to the number of dimms armed for firmware
activation.
A new nfit-specific bus attribute "firmware_activate_noidle" is added to
allow the activation to switch between platform enforced, and OS
opportunistic device quiesce. In other words, let the hibernate cycle
handle in-flight device-dma rather than the platform attempting to
increase PCI-E timeouts and the like.
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Abstract platform specific mechanics for nvdimm firmware activation
behind a handful of generic ops. At the bus level ->activate_state()
indicates the unified state (idle, busy, armed) of all DIMMs on the bus,
and ->capability() indicates the system state expectations for activate.
At the DIMM level ->activate_state() indicates the per-DIMM state,
->activate_result() indicates the outcome of the last activation
attempt, and ->arm() attempts to transition the DIMM from 'idle' to
'armed'.
A new hibernate_quiet_exec() facility is added to support firmware
activation in an OS defined system quiesce state. It leverages the fact
that the hibernate-freeze state wants to assert that a memory
hibernation snapshot can be taken. This is in contrast to a platform
firmware defined quiesce state that may forcefully quiet the memory
controller independent of whether an individual device-driver properly
supports hibernate-freeze.
The libnvdimm sysfs interface is extended to support detection of a
firmware activate capability. The mechanism supports enumeration and
triggering of firmware activate, optionally in the
hibernate_quiet_exec() context.
[rafael: hibernate_quiet_exec() proposal]
[vishal: fix up sparse warning, grammar in Documentation/]
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Co-developed-by: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Signed-off-by: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
The align attribute applies an alignment constraint for namespace
creation in a region. Whereas the 'align' attribute of a namespace
applied alignment padding via an info block, the 'align' attribute
applies alignment constraints to the free space allocation.
The default for 'align' is the maximum known memremap_compat_align()
across all archs (16MiB from PowerPC at time of writing) multiplied by
the number of interleave ways if there is blk-aliasing. The minimum is
PAGE_SIZE and allows for the creation of cross-arch incompatible
namespaces, just as previous kernels allowed, but the expectation is
cross-arch and mode-independent compatibility by default.
The regression risk with this change is limited to cases that were
dependent on the ability to create unaligned namespaces, *and* for some
reason are unable to opt-out of aligned namespaces by writing to
'regionX/align'. If such a scenario arises the default can be flipped
from opt-out to opt-in of compat-aligned namespace creation, but that is
a last resort. The kernel will otherwise continue to support existing
defined misaligned namespaces.
Unfortunately this change needs to touch several parts of the
implementation at once:
- region/available_size: expand busy extents to current align
- region/max_available_extent: expand busy extents to current align
- namespace/size: trim free space to current align
...to keep the free space accounting conforming to the dynamic align
setting.
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reported-by: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Link: https://lore.kernel.org/r/158041478371.3889308.14542630147672668068.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The NDD_ALIASING flag is used to indicate where pmem capacity might
alias with blk capacity and require labeling. It is also used to
indicate whether the DIMM supports labeling. Separate this latter
capability into its own flag so that the NDD_ALIASING flag is scoped to
true aliased configurations.
To my knowledge aliased configurations only exist in the ACPI spec,
there are no known platforms that ship this support in production.
This clarity allows namespace-capacity alignment constraints around
interleave-ways to be relaxed.
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Link: https://lore.kernel.org/r/158041477856.3889308.4212605617834097674.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
A 'struct device_type' instance can carry default attributes for the
device. Use this facility to remove the export of
nvdimm_attribute_group and put the responsibility on the core rather
than leaf implementations to define this attribute.
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Oliver O'Halloran" <oohall@gmail.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Link: https://lore.kernel.org/r/157309903201.1582359.10966209746585062329.stgit@dwillia2-desk3.amr.corp.intel.com
A 'struct device_type' instance can carry default attributes for the
device. Use this facility to remove the export of
nd_device_attribute_group and put the responsibility on the core rather
than leaf implementations to define this attribute.
For regions this creates a new nd_region_attribute_groups[] added to the
per-region device-type instances.
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Oliver O'Halloran" <oohall@gmail.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Link: https://lore.kernel.org/r/157309901138.1582359.12909354140826530394.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The security operations are exported from libnvdimm/security.c to
libnvdimm/dimm_devs.c, and libnvdimm/security.c is optionally compiled
based on the CONFIG_NVDIMM_KEYS config symbol.
Rather than export the operations across compile objects, just move the
__security_store() entry point to live with the helpers.
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/156686730515.184120.10522747907309996674.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
An attempt to freeze DIMMs currently runs afoul of default blocking of
all security operations in the entry to the 'store' routine for the
'security' sysfs attribute.
The blanket blocking of all security operations while the DIMM is in
active use in a region is too restrictive. The only security operations
that need to be aware of the ->busy state are those that mutate the
state of data, i.e. erase and overwrite.
Refactor the ->busy checks to be applied at the entry common entry point
in __security_store() rather than each of the helper routines to enable
freeze to be run regardless of busy state.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Link: https://lore.kernel.org/r/156686729996.184120.3458026302402493937.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In the process of debugging a system with an NVDIMM that was failing to
unlock it was found that the kernel is reporting 'locked' while the DIMM
security interface is 'frozen'. Unfortunately the security state is
tracked internally as an enum which prevents it from communicating the
difference between 'locked' and 'locked + frozen'. It follows that the
enum also prevents the kernel from communicating 'unlocked + frozen'
which would be useful for debugging why security operations like 'change
passphrase' are disabled.
Ditch the security state enum for a set of flags and introduce a new
sysfs attribute explicitly for the 'frozen' state. The regression risk
is low because the 'frozen' state was already blocked behind the
'locked' state, but will need to revisit if there were cases where
applications need 'frozen' to show up in the primary 'security'
attribute. The expectation is that communicating 'frozen' is mostly a
helper for debug and status monitoring.
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reported-by: Jeff Moyer <jmoyer@redhat.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Link: https://lore.kernel.org/r/156686729474.184120.5835135644278860826.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
For good reason, the standard device_lock() is marked
lockdep_set_novalidate_class() because there is simply no sane way to
describe the myriad ways the device_lock() ordered with other locks.
However, that leaves subsystems that know their own local device_lock()
ordering rules to find lock ordering mistakes manually. Instead,
introduce an optional / additional lockdep-enabled lock that a subsystem
can acquire in all the same paths that the device_lock() is acquired.
A conversion of the NFIT driver and NVDIMM subsystem to a
lockdep-validate device_lock() scheme is included. The
debug_nvdimm_lock() implementation implements the correct lock-class and
stacking order for the libnvdimm device topology hierarchy.
Yes, this is a hack, but hopefully it is a useful hack for other
subsystems device_lock() debug sessions. Quoting Greg:
"Yeah, it feels a bit hacky but it's really up to a subsystem to mess up
using it as much as anything else, so user beware :)
I don't object to it if it makes things easier for you to debug."
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/156341210661.292348.7014034644265455704.stgit@dwillia2-desk3.amr.corp.intel.com
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms of version 2 of the gnu general public license as
published by the free software foundation this program is
distributed in the hope that it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 64 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190529141901.894819585@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----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=WZfC
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk
Pull printk updates from Petr Mladek:
- Allow state reset of printk_once() calls.
- Prevent crashes when dereferencing invalid pointers in vsprintf().
Only the first byte is checked for simplicity.
- Make vsprintf warnings consistent and inlined.
- Treewide conversion of obsolete %pf, %pF to %ps, %pF printf
modifiers.
- Some clean up of vsprintf and test_printf code.
* tag 'printk-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
lib/vsprintf: Make function pointer_string static
vsprintf: Limit the length of inlined error messages
vsprintf: Avoid confusion between invalid address and value
vsprintf: Prevent crash when dereferencing invalid pointers
vsprintf: Consolidate handling of unknown pointer specifiers
vsprintf: Factor out %pO handler as kobject_string()
vsprintf: Factor out %pV handler as va_format()
vsprintf: Factor out %p[iI] handler as ip_addr_string()
vsprintf: Do not check address of well-known strings
vsprintf: Consistent %pK handling for kptr_restrict == 0
vsprintf: Shuffle restricted_pointer()
printk: Tie printk_once / printk_deferred_once into .data.once for reset
treewide: Switch printk users from %pf and %pF to %ps and %pS, respectively
lib/test_printf: Switch to bitmap_zalloc()
Merge miscellaneous libnvdimm sub-system updates for v5.1. Highlights
include:
* Support for the Hyper-V family of device-specific-methods (DSMs)
* Several fixes and workarounds for Hyper-V compatibility.
* Fix for the support to cache the dirty-shutdown-count at init.
As Dexuan reports the NVDIMM_FAMILY_HYPERV platform is incompatible with
the existing Linux namespace implementation because it uses
NSLABEL_FLAG_LOCAL for x1-width PMEM interleave sets. Quirk it as an
platform / DIMM that does not provide BLK-aperture access. Allow the
libnvdimm core to assume no potential for aliasing. In case other
implementations make the same mistake, provide a "noblk" module
parameter to force-enable the quirk.
Link: https://lkml.kernel.org/r/PU1P153MB0169977604493B82B662A01CBF920@PU1P153MB0169.APCP153.PROD.OUTLOOK.COM
Reported-by: Dexuan Cui <decui@microsoft.com>
Tested-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The following warning:
ACPI0012:00: security event setup failed: -19
...is meant to capture exceptional failures of sysfs_get_dirent(),
however it will also fail in the common case when security support is
disabled. A few issues:
1/ A dev_warn() report for a common case is too chatty
2/ The setup of this notifier is generic, no need for it to be driven
from the nfit driver, it can exist completely in the core.
3/ If it fails for any reason besides security support being disabled,
that's fatal and should abort DIMM activation. Userspace may hang if
it never gets overwrite notifications.
4/ The dirent needs to be released.
Move the call to the core 'dimm' driver, make it conditional on security
support being active, make it fatal for the exceptional case, add the
missing sysfs_put() at device disable time.
Fixes: 7d988097c5 ("...Add security DSM overwrite support")
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add nfit_test support for DSM functions "Get Security State",
"Set Passphrase", "Disable Passphrase", "Unlock Unit", "Freeze Lock",
and "Secure Erase" for the fake DIMMs.
Also adding a sysfs knob in order to put the DIMMs in "locked" state. The
order of testing DIMM unlocking would be.
1a. Disable DIMM X.
1b. Set Passphrase to DIMM X.
2. Write to
/sys/devices/platform/nfit_test.0/nfit_test_dimm/test_dimmX/lock_dimm
3. Renable DIMM X
4. Check DIMM X state via sysfs "security" attribute for nmemX.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
With Intel DSM 1.8 [1] two new security DSMs are introduced. Enable/update
master passphrase and master secure erase. The master passphrase allows
a secure erase to be performed without the user passphrase that is set on
the NVDIMM. The commands of master_update and master_erase are added to
the sysfs knob in order to initiate the DSMs. They are similar in opeartion
mechanism compare to update and erase.
[1]: http://pmem.io/documents/NVDIMM_DSM_Interface-V1.8.pdf
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add support for the NVDIMM_FAMILY_INTEL "ovewrite" capability as
described by the Intel DSM spec v1.7. This will allow triggering of
overwrite on Intel NVDIMMs. The overwrite operation can take tens of
minutes. When the overwrite DSM is issued successfully, the NVDIMMs will
be unaccessible. The kernel will do backoff polling to detect when the
overwrite process is completed. According to the DSM spec v1.7, the 128G
NVDIMMs can take up to 15mins to perform overwrite and larger DIMMs will
take longer.
Given that overwrite puts the DIMM in an indeterminate state until it
completes introduce the NDD_SECURITY_OVERWRITE flag to prevent other
operations from executing when overwrite is happening. The
NDD_WORK_PENDING flag is added to denote that there is a device reference
on the nvdimm device for an async workqueue thread context.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add support to issue a secure erase DSM to the Intel nvdimm. The
required passphrase is acquired from an encrypted key in the kernel user
keyring. To trigger the action, "erase <keyid>" is written to the
"security" sysfs attribute.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add support for enabling and updating passphrase on the Intel nvdimms.
The passphrase is the an encrypted key in the kernel user keyring.
We trigger the update via writing "update <old_keyid> <new_keyid>" to the
sysfs attribute "security". If no <old_keyid> exists (for enabling
security) then a 0 should be used.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add support to disable passphrase (security) for the Intel nvdimm. The
passphrase used for disabling is pulled from an encrypted-key in the kernel
user keyring. The action is triggered by writing "disable <keyid>" to the
sysfs attribute "security".
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Add support for freeze security on Intel nvdimm. This locks out any
changes to security for the DIMM until a hard reset of the DIMM is
performed. This is triggered by writing "freeze" to the generic
nvdimm/nmemX "security" sysfs attribute.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Some NVDIMMs, like the ones defined by the NVDIMM_FAMILY_INTEL command
set, expose a security capability to lock the DIMMs at poweroff and
require a passphrase to unlock them. The security model is derived from
ATA security. In anticipation of other DIMMs implementing a similar
scheme, and to abstract the core security implementation away from the
device-specific details, introduce nvdimm_security_ops.
Initially only a status retrieval operation, ->state(), is defined,
along with the base infrastructure and definitions for future
operations.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The generated dimm id is needed for the sysfs attribute as well as being
used as the identifier/description for the security key. Since it's
constant and should never change, store it as a member of struct nvdimm.
As nvdimm_create() continues to grow parameters relative to NFIT driver
requirements, do not require other implementations to keep pace.
Introduce __nvdimm_create() to carry the new parameters and keep
nvdimm_create() with the long standing default api.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
This patch splits the initialization of the label data into two functions.
One for doing the init, and another for reading the actual configuration
data. The idea behind this is that by doing this we create a symmetry
between the getting and setting of config data in that we have a function
for both. In addition it will make it easier for us to identify the bits
that are related to init versus the pieces that are a wrapper for reading
data from the ACPI interface.
So for example by splitting things out like this it becomes much more
obvious that we were performing checks that weren't necessarily related to
the set/get operations such as relying on ndd->data being present when the
set and get ops should not care about a locally cached copy of the label
area.
Reviewed-by: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Use kvzalloc() to bypass the arbitrary PAGE_SIZE limit of label transfer
operations. Given the expense of calling into firmware, maximize the
amount of label data we transfer per call to be up to the total label
space if allowed by the firmware.
Instead of limiting based on PAGE_SIZE we can instead simply limit the
maximum size based on either the config_size int he case of the get
operation, or the length of the write based on the set operation.
On a system with 24 NVDIMM modules each with a config_size of 128K and a
maximum transfer size of 64K - 4, this patch reduces the init time for the
label data from around 24 seconds down to between 4-5 seconds.
Reviewed-by: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
This patch will find the max contiguous area to determine the largest
pmem namespace size that can be created. If the requested size exceeds
the largest available, ENOSPC error will be returned.
This fixes the allocation underrun error and wrong error return code
that have otherwise been observed as the following kernel warning:
WARNING: CPU: <CPU> PID: <PID> at drivers/nvdimm/namespace_devs.c:913 size_store
Fixes: a1f3e4d6a0 ("libnvdimm, region: update nd_region_available_dpa() for multi-pmem support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
The new support for the standard _LSR and _LSW methods neglected to also
update the nvdimm_init_config_data() and nvdimm_set_config_data() to
return the translated error code from failed commands. This precision is
necessary because the locked status that was previously returned on
ND_CMD_GET_CONFIG_SIZE commands is now returned on
ND_CMD_{GET,SET}_CONFIG_DATA commands.
If the kernel misses this indication it can inadvertently fall back to
label-less mode when it should otherwise avoid all access to locked
regions.
Cc: <stable@vger.kernel.org>
Fixes: 4b27db7e26 ("acpi, nfit: add support for the _LSI, _LSR, and...")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dynamic debug can be instructed to add the function name to the debug
output using the +f switch, so there is no need for the libnvdimm
modules to do it again. If a user decides to add the +f switch for
libnvdimm's dynamic debug this results in double prints of the function
name.
Reported-by: Johannes Thumshirn <jthumshirn@suse.de>
Reported-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Given that we now how have two mechanisms for a DIMM to indicate that it
is locked:
* NVDIMM_FAMILY_INTEL 'get_config_size' _DSM command
* ACPI 6.2 Label Storage Read / Write commands
...export the generic libnvdimm DIMM status in a new 'flags' attribute.
This attribute can also reflect the 'alias' state which indicates
whether the nvdimm core is enforcing labels for aliased-region-capacity
that the given dimm is an interleave-set member.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
If we successfully enable a DIMM then it must not be locked and we can
clear the label-read failure condition. Otherwise, we need to reload the
entire bus provider driver to achieve the same effect, and that can
disrupt unrelated DIMMs and namespaces.
Fixes: 9d62ed9651 ("libnvdimm: handle locked label storage areas")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Allow volatile nfit ranges to participate in all the same infrastructure
provided for persistent memory regions. A resulting resulting namespace
device will still be called "pmem", but the parent region type will be
"nd_volatile". This is in preparation for disabling the dax ->flush()
operation in the pmem driver when it is hosted on a volatile range.
Cc: Jan Kara <jack@suse.cz>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Now that all callers of the pmem api have been converted to dax helpers that
call back to the pmem driver, we can remove include/linux/pmem.h and
asm/pmem.h.
Cc: <x86@kernel.org>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: Oliver O'Halloran <oohall@gmail.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
There are many code paths opencoding kvmalloc. Let's use the helper
instead. The main difference to kvmalloc is that those users are
usually not considering all the aspects of the memory allocator. E.g.
allocation requests <= 32kB (with 4kB pages) are basically never failing
and invoke OOM killer to satisfy the allocation. This sounds too
disruptive for something that has a reasonable fallback - the vmalloc.
On the other hand those requests might fallback to vmalloc even when the
memory allocator would succeed after several more reclaim/compaction
attempts previously. There is no guarantee something like that happens
though.
This patch converts many of those places to kv[mz]alloc* helpers because
they are more conservative.
Link: http://lkml.kernel.org/r/20170306103327.2766-2-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> # Xen bits
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Andreas Dilger <andreas.dilger@intel.com> # Lustre
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> # KVM/s390
Acked-by: Dan Williams <dan.j.williams@intel.com> # nvdim
Acked-by: David Sterba <dsterba@suse.com> # btrfs
Acked-by: Ilya Dryomov <idryomov@gmail.com> # Ceph
Acked-by: Tariq Toukan <tariqt@mellanox.com> # mlx4
Acked-by: Leon Romanovsky <leonro@mellanox.com> # mlx5
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Anton Vorontsov <anton@enomsg.org>
Cc: Colin Cross <ccross@android.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: Santosh Raspatur <santosh@chelsio.com>
Cc: Hariprasad S <hariprasad@chelsio.com>
Cc: Yishai Hadas <yishaih@mellanox.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: "Yan, Zheng" <zyan@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Per the latest version of the "NVDIMM DSM Interface Example" [1], the
label data retrieval routine can report a "locked" status. In this case
all regions associated with that DIMM are disabled until the label area
is unlocked. Provide generic libnvdimm enabling for NVDIMMs with label
data area locking capabilities.
[1]: http://pmem.io/documents/
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
This is a preparation patch for handling locked nvdimm label regions, a
new concept as introduced by the latest DSM document on pmem.io [1]. A
future patch will leverage nvdimm_set_locked() at DIMM probe time to
flag regions that can not be enabled. There should be no functional
difference resulting from this change.
[1]: http://pmem.io/documents/NVDIMM_DSM_Interface_Example-V1.3.pdf
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
