Commit Graph

3265 Commits

Author SHA1 Message Date
Yang Yingliang
ab4fdc735d cpufreq: imx6q: Switch to use dev_err_probe() helper
In the probe path, dev_err() can be replaced with dev_err_probe()
which will check if error code is -EPROBE_DEFER and prints the
error name. It also sets the defer probe reason which can be
checked later through debugfs. It's more simple in error path.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-10-18 16:22:25 +05:30
Yang Yingliang
2a808b9f70 cpufreq: dt: Switch to use dev_err_probe() helper
In the probe path, dev_err() can be replaced with dev_err_probe()
which will check if error code is -EPROBE_DEFER and prints the
error name. It also sets the defer probe reason which can be
checked later through debugfs. It's more simple in error path.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-10-18 16:22:25 +05:30
Fabien Parent
a05887f005 cpufreq: qcom: remove unused parameter in function definition
The speedbin_nvmem parameter is not used for
get_krait_bin_format_{a,b}. Let's remove the parameter to make the code
cleaner.

Signed-off-by: Fabien Parent <fabien.parent@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-10-18 16:22:25 +05:30
Fabien Parent
01039fb8e9 cpufreq: qcom: fix writes in read-only memory region
This commit fixes a kernel oops because of a write in some read-only memory:

	[    9.068287] Unable to handle kernel write to read-only memory at virtual address ffff800009240ad8
	..snip..
	[    9.138790] Internal error: Oops: 9600004f [#1] PREEMPT SMP
	..snip..
	[    9.269161] Call trace:
	[    9.276271]  __memcpy+0x5c/0x230
	[    9.278531]  snprintf+0x58/0x80
	[    9.282002]  qcom_cpufreq_msm8939_name_version+0xb4/0x190
	[    9.284869]  qcom_cpufreq_probe+0xc8/0x39c
	..snip..

The following line defines a pointer that point to a char buffer stored
in read-only memory:

	char *pvs_name = "speedXX-pvsXX-vXX";

This pointer is meant to hold a template "speedXX-pvsXX-vXX" where the
XX values get overridden by the qcom_cpufreq_krait_name_version function. Since
the template is actually stored in read-only memory, when the function
executes the following call we get an oops:

	snprintf(*pvs_name, sizeof("speedXX-pvsXX-vXX"), "speed%d-pvs%d-v%d",
		 speed, pvs, pvs_ver);

To fix this issue, we instead store the template name onto the stack by
using the following syntax:

	char pvs_name_buffer[] = "speedXX-pvsXX-vXX";

Because the `pvs_name` needs to be able to be assigned to NULL, the
template buffer is stored in the pvs_name_buffer and not under the
pvs_name variable.

Cc: v5.7+ <stable@vger.kernel.org> # v5.7+
Fixes: a8811ec764 ("cpufreq: qcom: Add support for krait based socs")
Signed-off-by: Fabien Parent <fabien.parent@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-10-18 16:22:25 +05:30
Fabien Parent
9f42cf5440 cpufreq: qcom: fix memory leak in error path
If for some reason the speedbin length is incorrect, then there is a
memory leak in the error path because we never free the speedbin buffer.
This commit fixes the error path to always free the speedbin buffer.

Cc: v5.7+ <stable@vger.kernel.org> # v5.7+
Fixes: a8811ec764 ("cpufreq: qcom: Add support for krait based socs")
Signed-off-by: Fabien Parent <fabien.parent@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-10-18 16:22:25 +05:30
Jon Hunter
1dcaf30725 cpufreq: tegra194: Fix module loading
When the Tegra194 CPUFREQ driver is built as a module it is not
automatically loaded as expected on Tegra194 devices. Populate the
MODULE_DEVICE_TABLE to fix this.

Cc: v5.9+ <stable@vger.kernel.org> # v5.9+
Fixes: df320f8935 ("cpufreq: Add Tegra194 cpufreq driver")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-10-18 16:22:25 +05:30
Linus Torvalds
a09476668e Char/Misc and other driver changes for 6.1-rc1
Here is the large set of char/misc and other small driver subsystem
 changes for 6.1-rc1.  Loads of different things in here:
   - IIO driver updates, additions, and changes.  Probably the largest
     part of the diffstat
   - habanalabs driver update with support for new hardware and features,
     the second largest part of the diff.
   - fpga subsystem driver updates and additions
   - mhi subsystem updates
   - Coresight driver updates
   - gnss subsystem updates
   - extcon driver updates
   - icc subsystem updates
   - fsi subsystem updates
   - nvmem subsystem and driver updates
   - misc driver updates
   - speakup driver additions for new features
   - lots of tiny driver updates and cleanups
 
 All of these have been in the linux-next tree for a while with no
 reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCY0GQmA8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ylyVQCeNJjZ3hy+Wz8WkPSY+NkehuIhyCIAnjXMOJP8
 5G/JQ+rpcclr7VOXlS66
 =zVkU
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc and other driver updates from Greg KH:
 "Here is the large set of char/misc and other small driver subsystem
  changes for 6.1-rc1. Loads of different things in here:

   - IIO driver updates, additions, and changes. Probably the largest
     part of the diffstat

   - habanalabs driver update with support for new hardware and
     features, the second largest part of the diff.

   - fpga subsystem driver updates and additions

   - mhi subsystem updates

   - Coresight driver updates

   - gnss subsystem updates

   - extcon driver updates

   - icc subsystem updates

   - fsi subsystem updates

   - nvmem subsystem and driver updates

   - misc driver updates

   - speakup driver additions for new features

   - lots of tiny driver updates and cleanups

  All of these have been in the linux-next tree for a while with no
  reported issues"

* tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits)
  w1: Split memcpy() of struct cn_msg flexible array
  spmi: pmic-arb: increase SPMI transaction timeout delay
  spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes
  spmi: pmic-arb: correct duplicate APID to PPID mapping logic
  spmi: pmic-arb: add support to dispatch interrupt based on IRQ status
  spmi: pmic-arb: check apid against limits before calling irq handler
  spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq
  spmi: pmic-arb: handle spurious interrupt
  spmi: pmic-arb: add a print in cleanup_irq
  drivers: spmi: Directly use ida_alloc()/free()
  MAINTAINERS: add TI ECAP driver info
  counter: ti-ecap-capture: capture driver support for ECAP
  Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items
  dt-bindings: counter: add ti,am62-ecap-capture.yaml
  counter: Introduce the COUNTER_COMP_ARRAY component type
  counter: Consolidate Counter extension sysfs attribute creation
  counter: Introduce the Count capture component
  counter: 104-quad-8: Add Signal polarity component
  counter: Introduce the Signal polarity component
  counter: interrupt-cnt: Implement watch_validate callback
  ...
2022-10-08 08:56:37 -07:00
Linus Torvalds
dd42d9c3f4 linux-kselftest-next-6.1-rc1
This Kselftest update for Linux 6.1-rc1 consists of fixes and new tests.
 
 - Adds a amd-pstate-ut test module, this module is used by kselftest
   to unit test amd-pstate functionality
 - Fixes and cleanups to to cpu-hotplug to delete the fault injection
   test code
 - Improvements to vm test to use top_srcdir for builds
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmM912gACgkQCwJExA0N
 QxzfAhAAspak4B2FVZdXrb7ulGxCV2CSd49qXbv++7rBy3Ey17XlIO8pUj2FMPpx
 nBrD2UD+ET/6wHjSzkcSzU47N2BnhetuUWqN2vPmuYo4c8xDME9VSWeoKQ9Yw5rc
 6r6TxNG/Jbxab4y9r8jibwkidVzcgfYO/Ecnj9HAZ6wDERkVG+LBxpX4HpxEnCsY
 c3frYFl0cdtLOSGbEA18qctG7ro2otgh4+cWVfSo9NDypL9UfF8bZ8DzqeMOwRLr
 z2S8L+kBPyQx+ZNdqUgNOfegVx2gKu/P43Xpg8WqRJG/42xxmRmftEOLoVKZ1cCe
 Rpjv+ZV+/u3QnbEejqJ7MU/QX9JzMG35O4mo7ojxpOJ+cZNXc1ycOm+IOvTCSUJE
 fiqM2idLvQNjKMVI+FHvkE+9us6K8fzquCYqgRLBKCnfnJJfgT6tWwZpw/G8OSZ6
 Px37bfQhALzDj79OkxxoV96GdkR9a2L8GRvZG+7W4l6Oa00OM+rK1oQnjKVgmjT5
 wtMwJAXGpwFYqnJagtXcg8dsxS/ZA+k4Eq/skd/yUlCmugmgeVltjk3UmEAYs6Nx
 ame3798/haptgR1u7ncqltqjx11YR2k9i0Sjf7iqQl8zJhjtDdePAlo2gB4mFUio
 mZ9BBxCD+oUnAZprA5AwN0ZxPKLWgvPS5rLqTtFt3Pf0agjHSpY=
 =O0Lh
 -----END PGP SIGNATURE-----

Merge tag 'linux-kselftest-next-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest updates from Shuah Khan:
 "Fixes and new tests:

   - Add an amd-pstate-ut test module, used by kselftest to unit test
     amd-pstate functionality

   - Fixes and cleanups to to cpu-hotplug to delete the fault injection
     test code

   - Improvements to vm test to use top_srcdir for builds"

* tag 'linux-kselftest-next-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  docs:kselftest: fix kselftest_module.h path of example module
  cpufreq: amd-pstate: Add explanation for X86_AMD_PSTATE_UT
  selftests/cpu-hotplug: Add log info when test success
  selftests/cpu-hotplug: Reserve one cpu online at least
  selftests/cpu-hotplug: Delete fault injection related code
  selftests/cpu-hotplug: Use return instead of exit
  selftests/cpu-hotplug: Correct log info
  cpufreq: amd-pstate: modify type in argument 2 for filp_open
  Documentation: amd-pstate: Add unit test introduction
  selftests: amd-pstate: Add test trigger for amd-pstate driver
  cpufreq: amd-pstate: Add test module for amd-pstate driver
  cpufreq: amd-pstate: Expose struct amd_cpudata
  selftests/vm: use top_srcdir instead of recomputing relative paths
2022-10-06 12:53:15 -07:00
Meng Li
bf6430f851 cpufreq: amd-pstate: Add explanation for X86_AMD_PSTATE_UT
This kernel module is used for testing. It's safe to say M here.
It can also be built-in without X86_AMD_PSTATE enabled.
Currently, only tests for amd-pstate are supported. If X86_AMD_PSTATE
is set disabled, it can tell the users test can only run on amd-pstate
driver, please set X86_AMD_PSTATE enabled.
In the future, comparison tests will be added. It can set amd-pstate
disabled and set acpi-cpufreq enabled to run test cases, then compare
the test results.

Suggested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Meng Li <li.meng@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-10-05 11:05:18 -06:00
Meng Li
ce29a148f3 cpufreq: amd-pstate: modify type in argument 2 for filp_open
Modify restricted FMODE_PREAD to experted int O_RDONLY to
fix the sparse warnings below:
sparse warnings: (new ones prefixed by >>)
>> drivers/cpufreq/amd-pstate-ut.c:74:40: sparse: sparse: incorrect type
>> in argument 2 (different base types) @@     expected int @@     got
>> restricted fmode_t [usertype] @@
   drivers/cpufreq/amd-pstate-ut.c:74:40: sparse:     expected int
   drivers/cpufreq/amd-pstate-ut.c:74:40: sparse:     got restricted
fmode_t [usertype]

Signed-off-by: Meng Li <li.meng@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-10-05 11:05:18 -06:00
Meng Li
14eb1c96e3 cpufreq: amd-pstate: Add test module for amd-pstate driver
Add amd-pstate-ut test module, this module is used by kselftest
to unit test amd-pstate functionality. This module will be
expected by some of selftests to be present and loaded.

Signed-off-by: Meng Li <li.meng@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-10-05 11:05:17 -06:00
Meng Li
f1375ec1df cpufreq: amd-pstate: Expose struct amd_cpudata
Expose struct amd_cpudata to AMD P-State unit test module.

This data struct will be used on the following AMD P-State unit test
(amd-pstate-ut) module. The amd-pstate-ut module can get some
AMD infomations by this data struct. For example: highest perf,
nominal perf, boost supported etc.

Signed-off-by: Meng Li <li.meng@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-10-05 11:05:17 -06:00
Linus Torvalds
c79e6fa98c Power management updates for 6.1-rc1
- Add isupport for Tiger Lake in no-HWP mode to intel_pstate (Doug
    Smythies).
 
  - Update the AMD P-state driver (Perry Yuan):
    * Fix wrong lowest perf fetch.
    * Map desired perf into pstate scope for powersave governor.
    * Update pstate frequency transition delay time.
    * Fix initial highest_perf value.
    * Clean up.
 
  - Move max CPU capacity to sugov_policy in the schedutil cpufreq
    governor (Lukasz Luba).
 
  - Add SM6115 to cpufreq-dt blocklist (Adam Skladowski).
 
  - Add support for Tegra239 and minor cleanups (Sumit Gupta, ye xingchen,
    and Yang Yingliang).
 
  - Add freq qos for qcom cpufreq driver and minor cleanups (Xuewen Yan,
    and Viresh Kumar).
 
  - Minor cleanups around functions called at module_init() (Xiu Jianfeng).
 
  - Use module_init and add module_exit for bmips driver (Zhang Jianhua).
 
  - Add AlderLake-N support to intel_idle (Zhang Rui).
 
  - Replace strlcpy() with unused retval with strscpy() in intel_idle
    (Wolfram Sang).
 
  - Remove redundant check from cpuidle_switch_governor() (Yu Liao).
 
  - Replace strlcpy() with unused retval with strscpy() in the powernv
    cpuidle driver (Wolfram Sang).
 
  - Drop duplicate word from a comment in the coupled cpuidle driver
    (Jason Wang).
 
  - Make rpm_resume() return -EINPROGRESS if RPM_NOWAIT is passed to it
    in the flags and the device is about to resume (Rafael Wysocki).
 
  - Add extra debugging statement for multiple active IRQs to system
    wakeup handling code (Mario Limonciello).
 
  - Replace strlcpy() with unused retval with strscpy() in the core
    system suspend support code (Wolfram Sang).
 
  - Update the intel_rapl power capping driver:
    * Use standard Energy Unit for SPR Dram RAPL domain (Zhang Rui).
    * Add support for RAPTORLAKE_S (Zhang Rui).
    * Fix UBSAN shift-out-of-bounds issue (Chao Qin).
 
  - Handle -EPROBE_DEFER when regulator is not probed on
    mtk-ci-devfreq.c (AngeloGioacchino Del Regno).
 
  - Fix message typo and use dev_err_probe() in rockchip-dfi.c
    (Christophe JAILLET).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmM7OrYSHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxeKAP/jFiZ1lhTGRngiVLMV6a6SSSy5xzzXZZ
 b/V0oqsuUvWWo6CzVmfU4QfmKGr55+77NgI9Yh5qN6zJTEJmunuCYwVD80KdxPDJ
 8SjMUNCACiVwfryLR1gFJlO+0BN4CWTxvto2gjGxzm0l1UQBACf71wm9MQCP8b7A
 gcBNuOtM7o5NLywDB+/528SiF9AXfZKjkwXhJACimak5yQytaCJaqtOWtcG2KqYF
 USunmqSB3IIVkAa5LJcwloc8wxHYo5mTPaWGGuSA65hfF42k3vJQ2/b8v8oTVza7
 bKzhegErIYtL6B9FjB+P1FyknNOvT7BYr+4RSGLvaPySfjMn1bwz9fM1Epo59Guk
 Azz3ExpaPixDh+x7b89W1Gb751FZU/zlWT+h1CNy5sOP/ChfxgCEBHw0mnWJ2Y0u
 CPcI/Ch0FNQHG+PdbdGlyfvORHVh7te/t6dOhoEHXBue+1r3VkOo8tRGY9x+2IrX
 /JB968u1r0oajF0btGwaDdbbWlyMRTzjrxVl3bwsuz/Kv/0JxsryND2JT0zkKAMZ
 qYT29HQxhdE0Duw1chgAK6X+BsgP58Bu6LeM3mVcwnGPZE9QvcFa0GQh7z+H71AW
 3yOGNmMVMqQSThBYFC6GDi7O2N1UEsLOMV9+ThTRh6D11nU4uiITM5QVIn8nWZGR
 z3IZ52Jg0oeJ
 =+3IL
 -----END PGP SIGNATURE-----

Merge tag 'pm-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management updates from Rafael Wysocki:
 "These add support for some new hardware, extend the existing hardware
  support, fix some issues and clean up code

  Specifics:

   - Add isupport for Tiger Lake in no-HWP mode to intel_pstate (Doug
     Smythies)

   - Update the AMD P-state driver (Perry Yuan):
      - Fix wrong lowest perf fetch
      - Map desired perf into pstate scope for powersave governor
      - Update pstate frequency transition delay time
      - Fix initial highest_perf value
      - Clean up

   - Move max CPU capacity to sugov_policy in the schedutil cpufreq
     governor (Lukasz Luba)

   - Add SM6115 to cpufreq-dt blocklist (Adam Skladowski)

   - Add support for Tegra239 and minor cleanups (Sumit Gupta, ye
     xingchen, and Yang Yingliang)

   - Add freq qos for qcom cpufreq driver and minor cleanups (Xuewen
     Yan, and Viresh Kumar)

   - Minor cleanups around functions called at module_init() (Xiu
     Jianfeng)

   - Use module_init and add module_exit for bmips driver (Zhang
     Jianhua)

   - Add AlderLake-N support to intel_idle (Zhang Rui)

   - Replace strlcpy() with unused retval with strscpy() in intel_idle
     (Wolfram Sang)

   - Remove redundant check from cpuidle_switch_governor() (Yu Liao)

   - Replace strlcpy() with unused retval with strscpy() in the powernv
     cpuidle driver (Wolfram Sang)

   - Drop duplicate word from a comment in the coupled cpuidle driver
     (Jason Wang)

   - Make rpm_resume() return -EINPROGRESS if RPM_NOWAIT is passed to it
     in the flags and the device is about to resume (Rafael Wysocki)

   - Add extra debugging statement for multiple active IRQs to system
     wakeup handling code (Mario Limonciello)

   - Replace strlcpy() with unused retval with strscpy() in the core
     system suspend support code (Wolfram Sang)

   - Update the intel_rapl power capping driver:
      - Use standard Energy Unit for SPR Dram RAPL domain (Zhang Rui).
      - Add support for RAPTORLAKE_S (Zhang Rui).
      - Fix UBSAN shift-out-of-bounds issue (Chao Qin)

   - Handle -EPROBE_DEFER when regulator is not probed on
     mtk-ci-devfreq.c (AngeloGioacchino Del Regno)

   - Fix message typo and use dev_err_probe() in rockchip-dfi.c
     (Christophe JAILLET)"

* tag 'pm-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (29 commits)
  cpufreq: qcom-cpufreq-hw: Add cpufreq qos for LMh
  cpufreq: Add __init annotation to module init funcs
  cpufreq: tegra194: change tegra239_cpufreq_soc to static
  PM / devfreq: rockchip-dfi: Fix an error message
  PM / devfreq: mtk-cci: Handle sram regulator probe deferral
  powercap: intel_rapl: Use standard Energy Unit for SPR Dram RAPL domain
  PM: runtime: Return -EINPROGRESS from rpm_resume() in the RPM_NOWAIT case
  intel_idle: Add AlderLake-N support
  powercap: intel_rapl: fix UBSAN shift-out-of-bounds issue
  cpufreq: tegra194: Add support for Tegra239
  cpufreq: qcom-cpufreq-hw: Fix uninitialized throttled_freq warning
  cpufreq: intel_pstate: Add Tigerlake support in no-HWP mode
  powercap: intel_rapl: Add support for RAPTORLAKE_S
  cpufreq: amd-pstate: Fix initial highest_perf value
  cpuidle: Remove redundant check in cpuidle_switch_governor()
  PM: wakeup: Add extra debugging statement for multiple active IRQs
  cpufreq: tegra194: Remove the unneeded result variable
  PM: suspend: move from strlcpy() with unused retval to strscpy()
  intel_idle: move from strlcpy() with unused retval to strscpy()
  cpuidle: powernv: move from strlcpy() with unused retval to strscpy()
  ...
2022-10-03 13:26:47 -07:00
Rafael J. Wysocki
b1d03b7ec7 Merge branches 'acpi-cppc', 'acpi-pcc', 'acpi-apei' and 'acpi-osi'
Merge new material related to CPPC, PCC, APEI and OSI strings handling
for 6.1-rc1:

 - Disable frequency invariance in the CPPC library if registers used
   by cppc_get_perf_ctrs() are accessed via PCC (Jeremy Linton).

 - Add ACPI disabled check to acpi_cpc_valid() (Perry Yuan).

 - Fix Tx acknowledge in the PCC address space handler (Huisong Li).

 - Use wait_for_completion_timeout() for PCC mailbox operations (Huisong
   Li).

 - Release resources on PCC address space setup failure path (Rafael
   Mendonca).

 - Remove unneeded result variables from APEI code (ye xingchen).

 - Print total number of records found during BERT log parsing (Dmitry
   Monakhov).

 - Drop support for 3 _OSI strings that should not be necessary any
   more and update documentation on custom _OSI strings so that adding
   new ones is not encouraged any more (Mario Limonciello).

* acpi-cppc:
  ACPI: CPPC: Disable FIE if registers in PCC regions
  ACPI: CPPC: Add ACPI disabled check to acpi_cpc_valid()

* acpi-pcc:
  ACPI: PCC: Fix Tx acknowledge in the PCC address space handler
  ACPI: PCC: replace wait_for_completion()
  ACPI: PCC: Release resources on address space setup failure path

* acpi-apei:
  ACPI: APEI: Remove unneeded result variables
  ACPI: APEI: Add BERT error log footer

* acpi-osi:
  ACPI: OSI: Update Documentation on custom _OSI strings
  ACPI: OSI: Remove Linux-HPI-Hybrid-Graphics _OSI string
  ACPI: OSI: Remove Linux-Lenovo-NV-HDMI-Audio _OSI string
  ACPI: OSI: Remove Linux-Dell-Video _OSI string
2022-10-03 19:49:05 +02:00
Rafael J. Wysocki
8e3d086767 cpufreq/arm updates for 6.1-rc1
- Add SM6115 to cpufreq-dt blocklist (Adam Skladowski).
 - Add support for Tegra239 and minor cleanups (Sumit Gupta, ye xingchen,
   and Yang Yingliang).
 - Add freq qos for qcom cpufreq driver and minor cleanups (Xuewen Yan,
   and Viresh Kumar).
 - Minor cleanups around functions called at module_init() (Xiu Jianfeng).
 - Use module_init and add module_exit for bmips driver (Zhang Jianhua).
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEx73Crsp7f6M6scA70rkcPK6BEhwFAmMxf2UACgkQ0rkcPK6B
 Ehw4jA//TjMC1SlKDS3UEizGll8EV5Tzm7lqLC7WL9A2PcIIZjbo7IEBWusG+D7x
 ynYU6OMw2pcEZ7rhAz85nvRCfyt7nq4Q+QbYPSgBfg2DLdlspQAWmE+D5CrZCmQG
 kJiBUCwswz166VbHGyvJ0C4/BPe/dOgp6NMDXftambuqyRiePdIc7NcovaJdqgnn
 6GGXQcxAPRizsNiqjrkJU1so6kbZ/ApR+pGwxcA/FWP+5EHDv9zUW4yR7S/dyNmP
 /ezDN+DlLnJuSpPoYMe9e6I+5uB7URv8ZmrBUepY9YM/veIppL/enBIFmUoiopKC
 OqaJ4Z1cICdNjC3ODjvQmjz6cH8zR1YzbJRFOo+XOV4Jk5/Dd3yadP4NT+NlyotM
 irZsSuzMtCUytta42AchMCl6jCx/xd3M8t9TOCgmfTj3Au+i7ee2QYys7RoTyeFf
 A9oo3jSWbGeU4TGUTo+o4+C7WxW9EESnxE3NjgD7vcRbtnKgRXcVWrau662gcxrI
 fQdymVfTGSwVNqwja8c8QO4oWi5PcKg/OCVBF/zyUX+nu+cbgJThwNZLzt8Z9fcJ
 BBp9i59ZK4yEUWkp/lV6S+ymgZutHKWAOUpmqgIs98G/Dq2dce6MId85cS+by5Sq
 Tl6CIZeRnj6M97nVVMPK1QX20Jwf5Y/YRLwG/Lx+/FbGOW0VDZ8=
 =iTZh
 -----END PGP SIGNATURE-----

Merge tag 'cpufreq-arm-updates-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm

Pull cpufreq/arm updates for 6.1-rc1 from Viresh Kumar:

"- Add SM6115 to cpufreq-dt blocklist (Adam Skladowski).
 - Add support for Tegra239 and minor cleanups (Sumit Gupta, ye xingchen,
   and Yang Yingliang).
 - Add freq qos for qcom cpufreq driver and minor cleanups (Xuewen Yan,
   and Viresh Kumar).
 - Minor cleanups around functions called at module_init() (Xiu Jianfeng).
 - Use module_init and add module_exit for bmips driver (Zhang
   Jianhua)."

* tag 'cpufreq-arm-updates-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
  cpufreq: qcom-cpufreq-hw: Add cpufreq qos for LMh
  cpufreq: Add __init annotation to module init funcs
  cpufreq: tegra194: change tegra239_cpufreq_soc to static
  cpufreq: tegra194: Add support for Tegra239
  cpufreq: qcom-cpufreq-hw: Fix uninitialized throttled_freq warning
  cpufreq: tegra194: Remove the unneeded result variable
  cpufreq: bmips-cpufreq: Use module_init and add module_exit
  cpufreq: Add SM6115 to cpufreq-dt-platdev blocklist
2022-09-28 17:10:15 +02:00
Xuewen Yan
c4c0efb06f cpufreq: qcom-cpufreq-hw: Add cpufreq qos for LMh
Before update thermal pressure, the max cpufreq should be limited.
Add QOS control for Lmh throttle cpufreq.

Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-09-26 14:05:45 +05:30
Xiu Jianfeng
f7968c22bd cpufreq: Add __init annotation to module init funcs
Add missing __init annotation to module init funcs.

Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-09-26 11:15:04 +05:30
Yang Yingliang
f991b11712 cpufreq: tegra194: change tegra239_cpufreq_soc to static
tegra239_cpufreq_soc is only used in tegra194-cpufreq.c now, change it
to static.

Fixes: 6768860107 ("cpufreq: tegra194: Add support for Tegra239")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-09-26 11:13:37 +05:30
Jeremy Linton
ae2df912d1 ACPI: CPPC: Disable FIE if registers in PCC regions
PCC regions utilize a mailbox to set/retrieve register values used by
the CPPC code. This is fine as long as the operations are
infrequent. With the FIE code enabled though the overhead can range
from 2-11% of system CPU overhead (ex: as measured by top) on Arm
based machines.

So, before enabling FIE assure none of the registers used by
cppc_get_perf_ctrs() are in the PCC region. Finally, add a module
parameter which can override the PCC region detection at boot or
module reload.

Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-09-24 18:43:46 +02:00
Rafał Miłecki
28fc7c986f nvmem: prefix all symbols with NVMEM_
This unifies all NVMEM symbols. They follow one style now.

Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220916122100.170016-8-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-24 14:54:38 +02:00
Sumit Gupta
6768860107 cpufreq: tegra194: Add support for Tegra239
Adding support for Tegra239 SoC which has eight cores in
a single cluster. Also, moving num_clusters to SoC data
to avoid over allocating memory for four clusters always.

Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-09-21 12:50:57 +05:30
Viresh Kumar
91dc90fdb8 cpufreq: qcom-cpufreq-hw: Fix uninitialized throttled_freq warning
Commit 6240aaad75 was supposed to drop the reference count to the OPP,
instead it avoided more stuff if the OPP isn't found. This isn't
entirely correct. We already have a frequency value available, we just
couldn't align it with an OPP in case of IS_ERR(opp).

Lets continue with updating thermal pressure, etc, even if we aren't
able to find an OPP here.

This fixes warning generated by the 'smatch' tool.

Fixes: 6240aaad75 ("cpufreq: qcom-hw: fix the opp entries refcounting")
Cc: v5.18+ <stable@vger.kernel.org> # v5.18+
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-09-21 12:49:40 +05:30
Doug Smythies
71bb5c82aa cpufreq: intel_pstate: Add Tigerlake support in no-HWP mode
Users may disable HWP in firmware, in which case intel_pstate wouldn't load
unless the CPU model is explicitly supported.

Add TIGERLAKE to the list of CPUs that can register intel_pstate while not
advertising the HWP capability. Without this change, an TIGERLAKE in no-HWP
mode could only use the acpi_cpufreq frequency scaling driver.

See also commits:
d8de7a44e1: cpufreq: intel_pstate: Add Skylake servers support
fbdc21e9b0: cpufreq: intel_pstate: Add Icelake servers support in no-HWP mode
706c532885: cpufreq: intel_pstate: Add Cometlake support in no-HWP mode

Reported by: M. Cargi Ari <cagriari@pm.me>
Signed-off-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-09-10 18:40:40 +02:00
Perry Yuan
bedadcfb01 cpufreq: amd-pstate: Fix initial highest_perf value
To avoid some new AMD processors use wrong highest perf when amd pstate
driver loaded, this fix will query the highest perf from MSR register
MSR_AMD_CPPC_CAP1 and cppc_acpi interface firstly, then compare with the
highest perf value got by calling amd_get_highest_perf() function.

The lower value will be the correct highest perf we need to use.
Otherwise the CPU max MHz will be incorrect if the
amd_get_highest_perf() did not cover the new process family and model ID.

Like this lscpu info, the max frequency is incorrect.

Vendor ID:               AuthenticAMD
    Socket(s):           1
    Stepping:            2
    CPU max MHz:         5410.0000
    CPU min MHz:         400.0000
    BogoMIPS:            5600.54

Fixes: 3743d55b28 (x86, sched: Fix the AMD CPPC maximum performance value on certain AMD Ryzen generations)
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-09-03 20:17:32 +02:00
ye xingchen
ddf958f397 cpufreq: tegra194: Remove the unneeded result variable
Return the value returned by smp_call_function_single() directly instead
of storing it in another redundant variable.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
[ Viresh: Minor update to commit log ]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-09-01 09:42:12 +05:30
Perry Yuan
ca08e46d42 cpufreq: amd-pstate: update pstate frequency transition delay time
Change the default transition latency to be 20ms that is more
reasonable transition delay for AMD processors in non-EPP driver mode.

Update transition delay time to 1ms, in the AMD CPU autonomous mode and
non-autonomous mode, CPPC firmware will decide frequency at 1ms timescale
based on the workload utilization.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-08-31 21:05:38 +02:00
Perry Yuan
0e9a86386b cpufreq: amd_pstate: map desired perf into pstate scope for powersave governor
The patch will fix the invalid desired perf value for powersave
governor. This issue is found when testing on one AMD EPYC system, the
actual des_perf is smaller than the min_perf value, that is invalid
value. because the min_perf is the lowest_perf system can support in
idle state.

Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-08-31 21:05:38 +02:00
Perry Yuan
b185c5053c cpufreq: amd_pstate: fix wrong lowest perf fetch
Fix the wrong lowest perf value reading which is used for new
des_perf calculation by governor requested, the incorrect min_perf will
get incorrect des_perf to be set , that will cause the system frequency
changing unexpectedly.

Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Su Jinzhou <jinzhou.su@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-08-31 21:05:37 +02:00
Perry Yuan
d8bee41db8 cpufreq: amd-pstate: fix white-space
Remove the white space and correct mixed-up indentation

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-08-31 21:05:37 +02:00
Perry Yuan
4f59540c3c cpufreq: amd-pstate: simplify cpudata pointer assignment
move the cpudata assignment to cpudata declaration which
will simplify the functions.

No functional change intended.

Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-08-31 21:05:37 +02:00
Zhang Jianhua
3359d52755 cpufreq: bmips-cpufreq: Use module_init and add module_exit
- Use module_init instead of device_initcall.
- Add a function for module_exit to unregister driver.

Signed-off-by: Zhang Jianhua <chris.zjh@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-08-30 13:49:23 +05:30
Perry Yuan
a2a9d18500 ACPI: CPPC: Add ACPI disabled check to acpi_cpc_valid()
Make acpi_cpc_valid() check if ACPI is disabled, so that its callers
don't need to check that separately.  This will also cause the AMD
pstate driver to refuse to load right away when ACPI is disabled.

Also update the warning message in amd_pstate_init() to mention the
ACPI disabled case for completeness.

Signed-off-by: Perry Yuan <Perry.Yuan@amd.com>
[ rjw: Subject edits, new changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-08-25 13:55:17 +02:00
Lukasz Luba
6ca7076fbf cpufreq: check only freq_table in __resolve_freq()
There is no need to check if the cpufreq driver implements callback
cpufreq_driver::target_index. The logic in the __resolve_freq uses
the frequency table available in the policy. It doesn't matter if the
driver provides 'target_index' or 'target' callback. It just has to
populate the 'policy->freq_table'.

Thus, check only frequency table during the frequency resolving call.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-08-23 20:00:52 +02:00
Adam Skladowski
0612d928b7 cpufreq: Add SM6115 to cpufreq-dt-platdev blocklist
The Qualcomm SM6115 platform uses the
qcom-cpufreq-hw driver, so add it to the cpufreq-dt-platdev driver's
blocklist.

Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-08-16 10:50:49 +05:30
Linus Torvalds
507f811f20 More power management updates for 5.20-rc1
- Fix return error code in mtk_cpu_dvfs_info_init (Yang Yingliang).
 
  - Minor cleanups and support for new boards for Qcom cpufreq drivers
    (Bryan O'Donoghue, Konrad Dybcio, Pierre Gondois, and Yicong Yang).
 
  - Fix sparse warnings for Tegra cpufreq driver (Viresh Kumar).
 
  - Make dev_pm_opp_set_regulators() accept NULL terminated list (Viresh
    Kumar).
 
  - Add dev_pm_opp_set_config() and friends and migrate other users and
    helpers to using them (Viresh Kumar).
 
  - Add support for multiple clocks for a device (Viresh Kumar and
    Krzysztof Kozlowski).
 
  - Configure resources before adding OPP table for Venus (Stanimir
    Varbanov).
 
  - Keep reference count up for opp->np and opp_table->np while they are
    still in use (Liang He).
 
  - Minor OPP cleanups (Viresh Kumar and Yang Li).
 
  - Add a trace event for cpuidle to track missed (too deep or too
    shallow) wakeups (Kajetan Puchalski).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmLxUA0SHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxypYQAK/sYS76XzKRjVsPmC082FVlA9Helhsa
 Op50DSnhfzYAWrtRZM5VPsV2CgQkmc5KCmZJSd1ZKIFcOpjlJT/rvaVaSH7Ltcn5
 52GOus6KXKCL3FegQLy3bLcmKkEJIXb3uhWE2VlSuj2cxx6KE2g4bUwPE0pRr++Y
 RkfaT6hcUzxxOAKw1cQhdXgBoXKL/ZeypmpZ95joYuas/mozKskM5SQFX455JCQ9
 t4vaRzrsHzxi5ELiML75TYMY97sF367wSs+4jZSgPBllbJcRXEMg+JkTccKRYrsZ
 k/kDvP5xVFzKT/dYpNpW3u/pl94+xZuh5WLF9/AqwC/qs7kLPJJ0/8mfTTd63DjZ
 3KrkimiQ3d2XMAL4L6FoK+T8v6MwzmlN0elmHHdtmu9mY+v01CwAzjpxdvaFoELK
 V6BCRRX8KNwYsrAJ4EpDK9TvPYJf8yT3jvGDcjPZY9RYlebje0Q825XOcxea4Dfe
 oFxiEWgfK9gzOBvaa24oifKDy2RVy6FvR43qQeiPG4AWAFjr4qP9cDO4q5OL/BuE
 sXpsGY5NE/e8JH9hkgmUK1ms50zk4UMbRC5ZoZuHWyiaFlJdMRF3cUGHe3ylPrxb
 XOFZz8Zl4WeAqBjGGHuiMedwEbmQH2RhdAMCQO1nxoq3UXy6E2/ojI1G1uQ9IEm0
 5FFouJ+bEnqO
 =LBb0
 -----END PGP SIGNATURE-----

Merge tag 'pm-5.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more power management updates from Rafael Wysocki:
 "These are ARM cpufreq updates and operating performance points (OPP)
  updates plus one cpuidle update adding a new trace point.

  Specifics:

   - Fix return error code in mtk_cpu_dvfs_info_init (Yang Yingliang).

   - Minor cleanups and support for new boards for Qcom cpufreq drivers
     (Bryan O'Donoghue, Konrad Dybcio, Pierre Gondois, and Yicong Yang).

   - Fix sparse warnings for Tegra cpufreq driver (Viresh Kumar).

   - Make dev_pm_opp_set_regulators() accept NULL terminated list
     (Viresh Kumar).

   - Add dev_pm_opp_set_config() and friends and migrate other users and
     helpers to using them (Viresh Kumar).

   - Add support for multiple clocks for a device (Viresh Kumar and
     Krzysztof Kozlowski).

   - Configure resources before adding OPP table for Venus (Stanimir
     Varbanov).

   - Keep reference count up for opp->np and opp_table->np while they
     are still in use (Liang He).

   - Minor OPP cleanups (Viresh Kumar and Yang Li).

   - Add a trace event for cpuidle to track missed (too deep or too
     shallow) wakeups (Kajetan Puchalski)"

* tag 'pm-5.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (55 commits)
  cpuidle: Add cpu_idle_miss trace event
  venus: pm_helpers: Fix warning in OPP during probe
  OPP: Don't drop opp->np reference while it is still in use
  OPP: Don't drop opp_table->np reference while it is still in use
  cpufreq: tegra194: Staticize struct tegra_cpufreq_soc instances
  dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM6375 compatible
  dt-bindings: opp: Add msm8939 to the compatible list
  dt-bindings: opp: Add missing compat devices
  dt-bindings: opp: opp-v2-kryo-cpu: Fix example binding checks
  cpufreq: Change order of online() CB and policy->cpus modification
  cpufreq: qcom-hw: Remove deprecated irq_set_affinity_hint() call
  cpufreq: qcom-hw: Disable LMH irq when disabling policy
  cpufreq: qcom-hw: Reset cancel_throttle when policy is re-enabled
  cpufreq: qcom-cpufreq-hw: use HZ_PER_KHZ macro in units.h
  cpufreq: mediatek: fix error return code in mtk_cpu_dvfs_info_init()
  OPP: Remove dev{m}_pm_opp_of_add_table_noclk()
  PM / devfreq: tegra30: Register config_clks helper
  OPP: Allow config_clks helper for single clk case
  OPP: Provide a simple implementation to configure multiple clocks
  OPP: Assert clk_count == 1 for single clk helpers
  ...
2022-08-08 14:29:00 -07:00
Rafael J. Wysocki
c3f834df19 Merge branch 'pm-cpufreq'
Merge ARM cpufreq updates for 5.20-rc1.

* pm-cpufreq:
  cpufreq: tegra194: Staticize struct tegra_cpufreq_soc instances
  dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM6375 compatible
  dt-bindings: opp: Add msm8939 to the compatible list
  dt-bindings: opp: Add missing compat devices
  dt-bindings: opp: opp-v2-kryo-cpu: Fix example binding checks
  cpufreq: Change order of online() CB and policy->cpus modification
  cpufreq: qcom-hw: Remove deprecated irq_set_affinity_hint() call
  cpufreq: qcom-hw: Disable LMH irq when disabling policy
  cpufreq: qcom-hw: Reset cancel_throttle when policy is re-enabled
  cpufreq: qcom-cpufreq-hw: use HZ_PER_KHZ macro in units.h
  cpufreq: mediatek: fix error return code in mtk_cpu_dvfs_info_init()
2022-08-08 19:35:33 +02:00
Linus Torvalds
c1c76700a0 SPDX changes for 6.0-rc1
Here is the set of SPDX comment updates for 6.0-rc1.
 
 Nothing huge here, just a number of updated SPDX license tags and
 cleanups based on the review of a number of common patterns in GPLv2
 boilerplate text.  Also included in here are a few other minor updates,
 2 USB files, and one Documentation file update to get the SPDX lines
 correct.
 
 All of these have been in the linux-next tree for a very long time.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYupz3g8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynPUgCgslaf2ssCgW5IeuXbhla+ZBRAzisAnjVgOvLN
 4AKdqbiBNlFbCroQwmeQ
 =v1sg
 -----END PGP SIGNATURE-----

Merge tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx

Pull SPDX updates from Greg KH:
 "Here is the set of SPDX comment updates for 6.0-rc1.

  Nothing huge here, just a number of updated SPDX license tags and
  cleanups based on the review of a number of common patterns in GPLv2
  boilerplate text.

  Also included in here are a few other minor updates, two USB files,
  and one Documentation file update to get the SPDX lines correct.

  All of these have been in the linux-next tree for a very long time"

* tag 'spdx-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: (28 commits)
  Documentation: samsung-s3c24xx: Add blank line after SPDX directive
  x86/crypto: Remove stray comment terminator
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_406.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_398.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_391.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_390.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_385.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_320.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_319.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_318.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_298.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_292.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_179.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 2)
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_168.RULE (part 1)
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_160.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_152.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_149.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_147.RULE
  treewide: Replace GPLv2 boilerplate/reference with SPDX - gpl-2.0_133.RULE
  ...
2022-08-04 12:12:54 -07:00
Rafael J. Wysocki
f6e0b468da OPP updates for 5.20-rc1
- Make dev_pm_opp_set_regulators() accept NULL terminated list (Viresh
   Kumar).
 
 - Add dev_pm_opp_set_config() and friends and migrate other
   users/helpers to using them (Viresh Kumar).
 
 - Add support for multiple clocks for a device (Viresh Kumar and
   Krzysztof Kozlowski).
 
 - Configure resources before adding OPP table for Venus (Stanimir
   Varbanov).
 
 - Keep reference count up for opp->np and opp_table->np while they are
   still in use (Liang He).
 
 - Minor cleanups (Viresh Kumar and Yang Li).
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEx73Crsp7f6M6scA70rkcPK6BEhwFAmLoprIACgkQ0rkcPK6B
 Ehz2nBAApgYUDGkEjWcJufIxW1mH77uonzmWUV2jQBEcCvYnjdwhJ0RpQUT75Xnk
 hTYJ5v9UKwOVl+puPguUe7UzSmWcsI9AzJCj0Vr/LBiln+sawoI51lqOaNjCJkmZ
 VytQJB23DNsYJAG/0xM42+syu+IONJ4vCP/9m35sWlevfFihbfQsEK+iEKsseVgd
 sEwPvHyixLWyeaoAf+6apOBP2Lf+/3R8h6Iv0U8n8jOzUpQQ5r/RSDyZeARP7gze
 64aXvsvr7D0Mc9GpevDJKGtPFbRNfq5I4Lg5MOZ8NQVjXOqlWJil3oYEnKQxIH0Y
 EEzcrSuWi3SEeHrQfj+GFs/D7z2ZHqmbg7yb4P7zSeqLvG+7Ey9aYOXOg5LykrYk
 1rZQzenLMF91RnhdRLI22SJngokOYZjWBFp62mPqmEYtx2VsYQlxqGtJoCHYDRx3
 QRp0ZYJBnHQMt7saiIRFdAAIz7/G5lkiUplVzqAWe7AEpUG3Y7kvIqfwi69s3I5S
 ERSf3qqx3dUGFXYoxwglEwaf8ZvKQnPOzOLmbyc9Hrj2MclfKf9vW+0/4J6iiDlu
 ITpsqEWUhtEjwCt3lbM6PWNRrCJHi6YkKw0sORxEWR639cqckmk6ZAuaRPeOob6a
 nZ/UvwU2LMRG1zZyrsB3bbUkijJ019RPySmjCXApLsoNT1qpUr0=
 =NHBQ
 -----END PGP SIGNATURE-----

Merge tag 'opp-updates-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm

Pull operating performance points (OPP) updates for 5.20-rc1 from Viresh
Kumar:

"- Make dev_pm_opp_set_regulators() accept NULL terminated list (Viresh
   Kumar).

 - Add dev_pm_opp_set_config() and friends and migrate other
   users/helpers to using them (Viresh Kumar).

 - Add support for multiple clocks for a device (Viresh Kumar and
   Krzysztof Kozlowski).

 - Configure resources before adding OPP table for Venus (Stanimir
   Varbanov).

 - Keep reference count up for opp->np and opp_table->np while they are
   still in use (Liang He).

 - Minor cleanups (Viresh Kumar and Yang Li)."

* tag 'opp-updates-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: (43 commits)
  venus: pm_helpers: Fix warning in OPP during probe
  OPP: Don't drop opp->np reference while it is still in use
  OPP: Don't drop opp_table->np reference while it is still in use
  OPP: Remove dev{m}_pm_opp_of_add_table_noclk()
  PM / devfreq: tegra30: Register config_clks helper
  OPP: Allow config_clks helper for single clk case
  OPP: Provide a simple implementation to configure multiple clocks
  OPP: Assert clk_count == 1 for single clk helpers
  OPP: Add key specific assert() method to key finding helpers
  OPP: Compare bandwidths for all paths in _opp_compare_key()
  OPP: Allow multiple clocks for a device
  dt-bindings: opp: accept array of frequencies
  OPP: Make dev_pm_opp_set_opp() independent of frequency
  OPP: Reuse _opp_compare_key() in _opp_add_static_v2()
  OPP: Remove rate_not_available parameter to _opp_add()
  OPP: Use consistent names for OPP table instances
  OPP: Use generic key finding helpers for bandwidth key
  OPP: Use generic key finding helpers for level key
  OPP: Add generic key finding helpers and use them for freq APIs
  OPP: Remove dev_pm_opp_find_freq_ceil_by_volt()
  ...
2022-08-03 17:49:38 +02:00
Rafael J. Wysocki
7912c9c6a6 Cpufreq/arm updates for 5.20-rc1
- Fix return error code in mtk_cpu_dvfs_info_init (Yang Yingliang).
 
 - Minor cleanups and support for new boards for Qcom cpufreq drivers
   (Bryan O'Donoghue, Konrad Dybcio, Pierre Gondois, and Yicong Yang).
 
 - Fix sparse warnings for Tegra driver (Viresh Kumar).
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEx73Crsp7f6M6scA70rkcPK6BEhwFAmLoqRYACgkQ0rkcPK6B
 EhzcNA/6A52UpkbXwfd63B+hCeLPTjjvnn+Z1FeRUG+ymbEDcMYQ7Z+ae3clKQ86
 MmkK9UkYae50riCz9lv10UihI5JtxVkyCiCvgASxmRAvKrbODqSOu0UmMKR+CwJ/
 GryoB8xCL/aAencyb3qin4fZHlwdjqBP7mgRQtoRbxjT0liFonauoG84DPhWhgMi
 i22V83j4pZpDIPyfNN9AvBOiaGXx3n3zG0ODx1E7Y7P9Eg/3n1AdRPST3C4Y4y3X
 79WbwBur13NKi9Ww5jw5guRKehNC8l79Ly80UQ4pRg2y4RtmyABX9qteOfvbj9Ix
 JFWV+EdDLhU+mk1hHMx3GzFDWsaUYS+ZrS9oDREZ06LkN1ZDf5OFOP8nxr7SRvSD
 3ZYlVA2IClt1Q//GsRiGy7kJK1qFtWVVWEE/NHS27W6VorugoHiyfNx8jYYBaOez
 bNyrKklYlIFsgkRoVG0e2/2ZrzCeTVZLjsFl9992pnoDG8Fv9fBUpsHQajLkolJ4
 KSZ35sxSvMzREKtuy4g8XeV2l9cES5FZ6B2iGqVo2BuoJdyqMfcQqtOyVbXAlkOz
 pXSPxVuNr5w9uVQhuE0cSAiqe6joMgE5jT+5A2dIThC34nRzDLTrmQohR31nDZRj
 nCsb3Pkee6j8DVwGVSNFuVJ0xvOnw1Sk8RCidiKZ9+Otu/blqaM=
 =fX64
 -----END PGP SIGNATURE-----

Merge tag 'cpufreq-arm-updates-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm

Pull cpufreq/ARM updates for 5.20-rc1 from Viresh Kumar:

"- Fix return error code in mtk_cpu_dvfs_info_init (Yang Yingliang).

 - Minor cleanups and support for new boards for Qcom cpufreq drivers
   (Bryan O'Donoghue, Konrad Dybcio, Pierre Gondois, and Yicong Yang).

 - Fix sparse warnings for Tegra driver (Viresh Kumar)."

* tag 'cpufreq-arm-updates-5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
  cpufreq: tegra194: Staticize struct tegra_cpufreq_soc instances
  dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM6375 compatible
  dt-bindings: opp: Add msm8939 to the compatible list
  dt-bindings: opp: Add missing compat devices
  dt-bindings: opp: opp-v2-kryo-cpu: Fix example binding checks
  cpufreq: Change order of online() CB and policy->cpus modification
  cpufreq: qcom-hw: Remove deprecated irq_set_affinity_hint() call
  cpufreq: qcom-hw: Disable LMH irq when disabling policy
  cpufreq: qcom-hw: Reset cancel_throttle when policy is re-enabled
  cpufreq: qcom-cpufreq-hw: use HZ_PER_KHZ macro in units.h
  cpufreq: mediatek: fix error return code in mtk_cpu_dvfs_info_init()
2022-08-03 17:47:45 +02:00
Rafael J. Wysocki
954a83fc60 Merge branches 'pm-core', 'pm-sleep', 'powercap', 'pm-domains' and 'pm-em'
Merge core device power management changes for v5.20-rc1:

 - Extend support for wakeirq to callback wrappers used during system
   suspend and resume (Ulf Hansson).

 - Defer waiting for device probe before loading a hibernation image
   till the first actual device access to avoid possible deadlocks
   reported by syzbot (Tetsuo Handa).

 - Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP (Bjorn
   Helgaas).

 - Add Raptor Lake-P to the list of processors supported by the Intel
   RAPL driver (George D Sworo).

 - Add Alder Lake-N and Raptor Lake-P to the list of processors for
   which Power Limit4 is supported in the Intel RAPL driver (Sumeet
   Pawnikar).

 - Make pm_genpd_remove() check genpd_debugfs_dir against NULL before
   attempting to remove it (Hsin-Yi Wang).

 - Change the Energy Model code to represent power in micro-Watts and
   adjust its users accordingly (Lukasz Luba).

* pm-core:
  PM: runtime: Extend support for wakeirq for force_suspend|resume

* pm-sleep:
  PM: hibernate: defer device probing when resuming from hibernation
  PM: wakeup: Unify device_init_wakeup() for PM_SLEEP and !PM_SLEEP

* powercap:
  powercap: RAPL: Add Power Limit4 support for Alder Lake-N and Raptor Lake-P
  powercap: intel_rapl: Add support for RAPTORLAKE_P

* pm-domains:
  PM: domains: Ensure genpd_debugfs_dir exists before remove

* pm-em:
  cpufreq: scmi: Support the power scale in micro-Watts in SCMI v3.1
  firmware: arm_scmi: Get detailed power scale from perf
  Documentation: EM: Switch to micro-Watts scale
  PM: EM: convert power field to micro-Watts precision and align drivers
2022-07-29 19:33:13 +02:00
Zhao Liu
3e5c04f97c cpufreq: ondemand: Use cpumask_var_t for on-stack cpu mask
A cpumask structure on the stack can cause a warning with
CONFIG_NR_CPUS=8192 (e.g. Ubuntu 22.04 uses this):

drivers/cpufreq/cpufreq_ondemand.c: In function 'od_set_powersave_bias':
drivers/cpufreq/cpufreq_ondemand.c:449:1: warning: the frame size of
	1032 bytes is larger than 1024 bytes [-Wframe-larger-than=]
  449 | }
      | ^

CONFIG_CPUMASK_OFFSTACK=y is enabled by default for most distros, and
hence we can work around the warning by using cpumask_var_t.

Signed-off-by: Zhao Liu <zhao1.liu@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-07-25 20:38:01 +02:00
Randy Dunlap
9d822ccf33 cpufreq: loongson2: fix Kconfig "its" grammar
Use the possessive "its" instead of the contraction "it's"
where appropriate.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-07-25 20:34:56 +02:00
Rafael J. Wysocki
6e28f057e3 Merge back earlier cpufreq material for 5.20. 2022-07-18 20:03:52 +02:00
Viresh Kumar
33fe1cb20c cpufreq: tegra194: Staticize struct tegra_cpufreq_soc instances
Fix sparse warnings by marking these structures static.

Fixes: 273bc890a2 ("cpufreq: tegra194: Add support for Tegra234")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-18 12:27:00 +05:30
Pierre Gondois
68315f1a5f cpufreq: Change order of online() CB and policy->cpus modification
From a state where all policy->related_cpus are offline, putting one
of the policy's CPU back online re-activates the policy by:
 1. Calling cpufreq_driver->online()
 2. Setting the CPU in policy->cpus

qcom_cpufreq_hw_cpu_online() makes use of policy->cpus. Thus 1. and 2.
should be inverted to avoid having a policy->cpus empty. The
qcom-cpufreq-hw is the only driver affected by this.

Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-18 07:22:22 +05:30
Viresh Kumar
a2f6a7ac60 cpufreq: Warn users while freeing active policy
With the new design in place, the show() and store() callbacks check if
the policy is active or not before proceeding any further to avoid
potential races. And in order to guarantee that cpufreq_policy_free()
must be called after clearing the policy->cpus mask, i.e. by marking the
policy inactive.

In order to avoid introducing a bug around this later, print a warning
message if we end up freeing an active policy.

Also update cpufreq_online() a bit to make sure we clear the cpus mask
for each error case before calling cpufreq_policy_free().

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-07-15 19:19:51 +02:00
Lukasz Luba
f3ac888fc5 cpufreq: scmi: Support the power scale in micro-Watts in SCMI v3.1
The SCMI v3.1 adds support for power values in micro-Watts. They are not
always in milli-Watts anymore (ignoring the bogo-Watts). Thus, the power
must be converted conditionally before sending to Energy Model. Add the
logic which handles the needed checks and conversions.

Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-07-15 19:17:30 +02:00
Lukasz Luba
ae6ccaa650 PM: EM: convert power field to micro-Watts precision and align drivers
The milli-Watts precision causes rounding errors while calculating
efficiency cost for each OPP. This is especially visible in the 'simple'
Energy Model (EM), where the power for each OPP is provided from OPP
framework. This can cause some OPPs to be marked inefficient, while
using micro-Watts precision that might not happen.

Update all EM users which access 'power' field and assume the value is
in milli-Watts.

Solve also an issue with potential overflow in calculation of energy
estimation on 32bit machine. It's needed now since the power value
(thus the 'cost' as well) are higher.

Example calculation which shows the rounding error and impact:

power = 'dyn-power-coeff' * volt_mV * volt_mV * freq_MHz

power_a_uW = (100 * 600mW * 600mW * 500MHz) / 10^6 = 18000
power_a_mW = (100 * 600mW * 600mW * 500MHz) / 10^9 = 18

power_b_uW = (100 * 605mW * 605mW * 600MHz) / 10^6 = 21961
power_b_mW = (100 * 605mW * 605mW * 600MHz) / 10^9 = 21

max_freq = 2000MHz

cost_a_mW = 18 * 2000MHz/500MHz = 72
cost_a_uW = 18000 * 2000MHz/500MHz = 72000

cost_b_mW = 21 * 2000MHz/600MHz = 70 // <- artificially better
cost_b_uW = 21961 * 2000MHz/600MHz = 73203

The 'cost_b_mW' (which is based on old milli-Watts) is misleadingly
better that the 'cost_b_uW' (this patch uses micro-Watts) and such
would have impact on the 'inefficient OPPs' information in the Cpufreq
framework. This patch set removes the rounding issue.

Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-07-15 19:17:30 +02:00
Rafael J. Wysocki
5a5adb1528 cpufreq arm fixes for 5.19-rc6
- mediatek: Handle sram regulator probe deferral
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEx73Crsp7f6M6scA70rkcPK6BEhwFAmLQ80EACgkQ0rkcPK6B
 EhxYCw//QXz2zA4ynpBcim6bomdZXASsOnF4lzRQQe+BdiXBawStUCiWDO1Wq2ZM
 VgOcXjUIY946dt3P9luz8EERUuoi7MiJF+Oi6as3wD1BkEp58n2zq+eDTvPgmp6O
 +6UMVSXzUZRVC+TiSzulFvcO+IxBkdIHgVPbnwijaY4eXfqHldr+QsBw+bz/A8aN
 bicdfaydBYhUcwTZeoitJOGORGO+tQsWTZI+kRYL4QC0H8g9Wce7zNwjNLG47X3H
 GttSDm3IOHPrS+BWAC68uZLYb2tq0LNUN9ar8WdNE6PmpjKT5WfOS0dXZMSAIRa+
 Qf5ZIjGKNRDOJ6jrrYudk/rGCrsP2I8jiqQG8siQD4V4Zz4tNhN6nhGojvGGDidV
 BMrEYPqFRRFgeLGanoJQ/a7pHtPCTwEnXImfoSEzPVwTVncyUtkslAAFTqVaJnn/
 ATwqU7IKztEP42aN+Ne/BYWBawCDFdbN3vw6xx3xTGthEPilnupz2LE6b1B9ej87
 A2QSZnb43+S+FH8ldU2i8yy7TdKWdg4FZSPHDPAlNNSZKn+8Dq7QSJuKRrlbwPFq
 ffTcNnFJFy9GV9Br+pmesGdy+3AMFe16j7c3UDbG1OtHTHYHp6aQaWIkiwQuSh4G
 dGRSc86qW/Z2hiOA2JNX/MlQ+5HrhUVsUYlMewKyfwXfsznAOZo=
 =kYvA
 -----END PGP SIGNATURE-----

Merge tag 'cpufreq-arm-fixes-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm

Pull a cpufreq ARM fix for 5.19-rc7 from Viresh Kumar:

- mediatek: Handle sram regulator probe deferral

* tag 'cpufreq-arm-fixes-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
  cpufreq: mediatek: Handle sram regulator probe deferral
2022-07-15 13:54:14 +02:00
Pierre Gondois
f2b03dffa6 cpufreq: qcom-hw: Remove deprecated irq_set_affinity_hint() call
commit 65c7cdedeb ("genirq: Provide new interfaces for affinity hints")
deprecates irq_set_affinity_hint(). Use the new
irq_set_affinity_and_hint() instead.

Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2022-07-13 16:53:00 +05:30