xfstests generic/013 and generic/476 reported WARNING as follows:
WARNING: lock held when returning to user space!
6.1.0-rc5+ #4 Not tainted
------------------------------------------------
fsstress/504233 is leaving the kernel with locks still held!
2 locks held by fsstress/504233:
#0: ffff888054c38850 (&sb->s_type->i_mutex_key#21){+.+.}-{3:3}, at:
lock_two_nondirectories+0xcf/0xf0
#1: ffff8880b8fec750 (&sb->s_type->i_mutex_key#21/4){+.+.}-{3:3}, at:
lock_two_nondirectories+0xb7/0xf0
This will lead to deadlock and hungtask.
Fix this by releasing locks when failed to write out on a file range in
cifs_file_copychunk_range().
Fixes: 3e3761f1ec ("smb3: use filemap_write_and_wait_range instead of filemap_write_and_wait")
Cc: stable@vger.kernel.org # 6.0
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This debug code dereferences "old_iface" after it was already freed by
the call to release_iface(). Re-order the debugging to avoid this
issue.
Fixes: b54034a73b ("cifs: during reconnect, update interface if necessary")
Cc: stable@vger.kernel.org # 5.19+
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
If the returning value of SMB2_set_info_init is an error-value,
exit the function.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 0967e54579 ("cifs: use a compound for setting an xattr")
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
The return value of CIFSGetExtAttr is negative, should be checked
with -EOPNOTSUPP rather than EOPNOTSUPP.
Fixes: 64a5cfa6db ("Allow setting per-file compression via SMB2/3")
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
If the returning value of SMB2_close_init is an error-value,
exit the function.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 352d96f3ac ("cifs: multichannel: move channel selection above transport layer")
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Signed-off-by: Steve French <stfrench@microsoft.com>
If the tlink setup failed, lost to put the connections, then
the module refcnt leak since the cifsd kthread not exit.
Also leak the fscache info, and for next mount with fsc, it will
print the follow errors:
CIFS: Cache volume key already in use (cifs,127.0.0.1:445,TEST)
Let's check the result of tlink setup, and do some cleanup.
Fixes: 56c762eb9b ("cifs: Refactor out cifs_mount()")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
xfstests generic/011 reported use-after-free bug as follows:
BUG: KASAN: use-after-free in __d_alloc+0x269/0x859
Read of size 15 at addr ffff8880078933a0 by task dirstress/952
CPU: 1 PID: 952 Comm: dirstress Not tainted 6.1.0-rc3+ #77
Call Trace:
__dump_stack+0x23/0x29
dump_stack_lvl+0x51/0x73
print_address_description+0x67/0x27f
print_report+0x3e/0x5c
kasan_report+0x7b/0xa8
kasan_check_range+0x1b2/0x1c1
memcpy+0x22/0x5d
__d_alloc+0x269/0x859
d_alloc+0x45/0x20c
d_alloc_parallel+0xb2/0x8b2
lookup_open+0x3b8/0x9f9
open_last_lookups+0x63d/0xc26
path_openat+0x11a/0x261
do_filp_open+0xcc/0x168
do_sys_openat2+0x13b/0x3f7
do_sys_open+0x10f/0x146
__se_sys_creat+0x27/0x2e
__x64_sys_creat+0x55/0x6a
do_syscall_64+0x40/0x96
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Allocated by task 952:
kasan_save_stack+0x1f/0x42
kasan_set_track+0x21/0x2a
kasan_save_alloc_info+0x17/0x1d
__kasan_kmalloc+0x7e/0x87
__kmalloc_node_track_caller+0x59/0x155
kstrndup+0x60/0xe6
parse_mf_symlink+0x215/0x30b
check_mf_symlink+0x260/0x36a
cifs_get_inode_info+0x14e1/0x1690
cifs_revalidate_dentry_attr+0x70d/0x964
cifs_revalidate_dentry+0x36/0x62
cifs_d_revalidate+0x162/0x446
lookup_open+0x36f/0x9f9
open_last_lookups+0x63d/0xc26
path_openat+0x11a/0x261
do_filp_open+0xcc/0x168
do_sys_openat2+0x13b/0x3f7
do_sys_open+0x10f/0x146
__se_sys_creat+0x27/0x2e
__x64_sys_creat+0x55/0x6a
do_syscall_64+0x40/0x96
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Freed by task 950:
kasan_save_stack+0x1f/0x42
kasan_set_track+0x21/0x2a
kasan_save_free_info+0x1c/0x34
____kasan_slab_free+0x1c1/0x1d5
__kasan_slab_free+0xe/0x13
__kmem_cache_free+0x29a/0x387
kfree+0xd3/0x10e
cifs_fattr_to_inode+0xb6a/0xc8c
cifs_get_inode_info+0x3cb/0x1690
cifs_revalidate_dentry_attr+0x70d/0x964
cifs_revalidate_dentry+0x36/0x62
cifs_d_revalidate+0x162/0x446
lookup_open+0x36f/0x9f9
open_last_lookups+0x63d/0xc26
path_openat+0x11a/0x261
do_filp_open+0xcc/0x168
do_sys_openat2+0x13b/0x3f7
do_sys_open+0x10f/0x146
__se_sys_creat+0x27/0x2e
__x64_sys_creat+0x55/0x6a
do_syscall_64+0x40/0x96
entry_SYSCALL_64_after_hwframe+0x63/0xcd
When opened a symlink, link name is from 'inode->i_link', but it may be
reset to a new value when revalidate the dentry. If some processes get the
link name on the race scenario, then UAF will happen on link name.
Fix this by implementing 'get_link' interface to duplicate the link name.
Fixes: 76894f3e2f ("cifs: improve symlink handling for smb2+")
Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
In a few places, we do unnecessary iterations of
tcp sessions, even when the server struct is provided.
The change avoids it and uses the server struct provided.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
smb sessions and tcons currently hang off primary channel only.
Secondary channels have the lists as empty. Whenever there's a
need to iterate sessions or tcons, we should use the list in the
corresponding primary channel.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
`hostname` needs to be set as null-pointer after free in
`cifs_put_tcp_session` function, or when `cifsd` thread attempts
to resolve hostname and reconnect the host, the thread would deref
the invalid pointer.
Here is one of practical backtrace examples as reference:
Task 477
---------------------------
do_mount
path_mount
do_new_mount
vfs_get_tree
smb3_get_tree
smb3_get_tree_common
cifs_smb3_do_mount
cifs_mount
mount_put_conns
cifs_put_tcp_session
--> kfree(server->hostname)
cifsd
---------------------------
kthread
cifs_demultiplex_thread
cifs_reconnect
reconn_set_ipaddr_from_hostname
--> if (!server->hostname)
--> if (server->hostname[0] == '\0') // !! UAF fault here
CIFS: VFS: cifs_mount failed w/return code = -112
mount error(112): Host is down
BUG: KASAN: use-after-free in reconn_set_ipaddr_from_hostname+0x2ba/0x310
Read of size 1 at addr ffff888108f35380 by task cifsd/480
CPU: 2 PID: 480 Comm: cifsd Not tainted 6.1.0-rc2-00106-gf705792f89dd-dirty #25
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x68/0x85
print_report+0x16c/0x4a3
kasan_report+0x95/0x190
reconn_set_ipaddr_from_hostname+0x2ba/0x310
__cifs_reconnect.part.0+0x241/0x800
cifs_reconnect+0x65f/0xb60
cifs_demultiplex_thread+0x1570/0x2570
kthread+0x2c5/0x380
ret_from_fork+0x22/0x30
</TASK>
Allocated by task 477:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
__kasan_kmalloc+0x7e/0x90
__kmalloc_node_track_caller+0x52/0x1b0
kstrdup+0x3b/0x70
cifs_get_tcp_session+0xbc/0x19b0
mount_get_conns+0xa9/0x10c0
cifs_mount+0xdf/0x1970
cifs_smb3_do_mount+0x295/0x1660
smb3_get_tree+0x352/0x5e0
vfs_get_tree+0x8e/0x2e0
path_mount+0xf8c/0x1990
do_mount+0xee/0x110
__x64_sys_mount+0x14b/0x1f0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Freed by task 477:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
kasan_save_free_info+0x2a/0x50
__kasan_slab_free+0x10a/0x190
__kmem_cache_free+0xca/0x3f0
cifs_put_tcp_session+0x30c/0x450
cifs_mount+0xf95/0x1970
cifs_smb3_do_mount+0x295/0x1660
smb3_get_tree+0x352/0x5e0
vfs_get_tree+0x8e/0x2e0
path_mount+0xf8c/0x1990
do_mount+0xee/0x110
__x64_sys_mount+0x14b/0x1f0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The buggy address belongs to the object at ffff888108f35380
which belongs to the cache kmalloc-16 of size 16
The buggy address is located 0 bytes inside of
16-byte region [ffff888108f35380, ffff888108f35390)
The buggy address belongs to the physical page:
page:00000000333f8e58 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888108f350e0 pfn:0x108f35
flags: 0x200000000000200(slab|node=0|zone=2)
raw: 0200000000000200 0000000000000000 dead000000000122 ffff8881000423c0
raw: ffff888108f350e0 000000008080007a 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888108f35280: fa fb fc fc fa fb fc fc fa fb fc fc fa fb fc fc
ffff888108f35300: fa fb fc fc fa fb fc fc fa fb fc fc fa fb fc fc
>ffff888108f35380: fa fb fc fc fa fb fc fc fa fb fc fc fa fb fc fc
^
ffff888108f35400: fa fb fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff888108f35480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
Fixes: 7be3248f31 ("cifs: To match file servers, make sure the server hostname matches")
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
When we delete or rename a directory we must also drop any cached lease we have
on the directory.
Fixes: a350d6e73f5e ("cifs: enable caching of directories for which a lease is held")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The "Server interfaces" count in /proc/fs/cifs/DebugData increases
as the interfaces are requeried, rather than being reset to the new
value. This could cause a problem if the server disabled
multichannel as the iface_count is checked in try_adding_channels
to see if multichannel still supported.
Also fixes a coverity warning:
Addresses-Coverity: 1526374 ("Concurrent data access violations (MISSING_LOCK)")
Cc: <stable@vger.kernel.org>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We already set rc to this return code further down in the function but
we can set it earlier in order to suppress a smash warning.
Also fix a false positive for Coverity. The reason this is a false positive is
that this happens during umount after all files and directories have been closed
but mosetting on ->on_list to suppress the warning.
Reported-by: Dan carpenter <dan.carpenter@oracle.com>
Reported-by: coverity-bot <keescook+coverity-bot@chromium.org>
Addresses-Coverity-ID: 1525256 ("Concurrent data access violations")
Fixes: a350d6e73f5e ("cifs: enable caching of directories for which a lease is held")
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
list_head can be initialized automatically with LIST_HEAD()
instead of calling INIT_LIST_HEAD().
Using list_move() instead of list_del() and list_add().
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
If stardup the symlink target failed, should free the xid,
otherwise the xid will be leaked.
Fixes: 76894f3e2f ("cifs: improve symlink handling for smb2+")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Before return, should free the xid, otherwise, the
xid will be leaked.
Fixes: d70e9fa558 ("cifs: try opening channels after mounting")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
If not flock, before return -ENOLCK, should free the xid,
otherwise, the xid will be leaked.
Fixes: d0677992d2 ("cifs: add support for flock")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
If the file is used by swap, before return -EOPNOTSUPP, should
free the xid, otherwise, the xid will be leaked.
Fixes: 4e8aea30f7 ("smb3: enable swap on SMB3 mounts")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
If the cifs already shutdown, we should free the xid before return,
otherwise, the xid will be leaked.
Fixes: 087f757b01 ("cifs: add shutdown support")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Change notification is a commonly supported feature by most servers,
but the current ioctl to request notification when a directory is
changed does not return the information about what changed
(even though it is returned by the server in the SMB3 change
notify response), it simply returns when there is a change.
This ioctl improves upon CIFS_IOC_NOTIFY by returning the notify
information structure which includes the name of the file(s) that
changed and why. See MS-SMB2 2.2.35 for details on the individual
filter flags and the file_notify_information structure returned.
To use this simply pass in the following (with enough space
to fit at least one file_notify_information structure)
struct __attribute__((__packed__)) smb3_notify {
uint32_t completion_filter;
bool watch_tree;
uint32_t data_len;
uint8_t data[];
} __packed;
using CIFS_IOC_NOTIFY_INFO 0xc009cf0b
or equivalently _IOWR(CIFS_IOCTL_MAGIC, 11, struct smb3_notify_info)
The ioctl will block until the server detects a change to that
directory or its subdirectories (if watch_tree is set).
Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
cifs_open and _cifsFileInfo_put also end up with lease_key uninitialized
in smb1 mounts. It is cleaner to set lease key to zero in these
places where leases are not supported (smb1 can not return lease keys
so the field was uninitialized).
Addresses-Coverity: 1514207 ("Uninitialized scalar variable")
Addresses-Coverity: 1514331 ("Uninitialized scalar variable")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
It is cleaner to set lease key to zero in the places where leases are not
supported (smb1 can not return lease keys so the field was uninitialized).
Addresses-Coverity: 1513994 ("Uninitialized scalar variable")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Coverity spotted that we were not initalizing Stbz1 and Stbz2 to
zero in create_sd_buf.
Addresses-Coverity: 1513848 ("Uninitialized scalar variable")
Cc: <stable@vger.kernel.org>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
The crash occurred because we were calling memzero_explicit() on an
already freed sess_data::iov[1] (ntlmsspblob) in sess_free_buffer().
Fix this by not calling memzero_explicit() on sess_data::iov[1] as
it's already by handled by callers.
Fixes: a4e430c8c8 ("cifs: replace kfree() with kfree_sensitive() for sensitive data")
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Remove unnecessary NULL check of oparam->cifs_sb when parsing symlink
error response as it's already set by all smb2_open_file() callers and
deferenced earlier.
This fixes below report:
fs/cifs/smb2file.c:126 smb2_open_file()
warn: variable dereferenced before check 'oparms->cifs_sb' (see line 112)
Link: https://lore.kernel.org/r/Y0kt42j2tdpYakRu@kili
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Improve code readability by using existing macros:
Replace hardcoded alignment computations (e.g. (len + 7) & ~0x7) by
ALIGN()/IS_ALIGNED() macros.
Also replace (DIV_ROUND_UP(len, 8) * 8) with ALIGN(len, 8), which, if
not optimized by the compiler, has the overhead of a multiplication
and a division. Do the same for roundup() by replacing it by round_up()
(division-less version, but requires the multiple to be a power of 2,
which is always the case for us).
And remove some unnecessary checks where !IS_ALIGNED() would fit, but
calling round_up() directly is fine as it's a no-op if the value is
already aligned.
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This allows us to use cached attributes for the entries in a cached
directory for as long as a lease is held on the directory itself.
Previously we have always allowed "used cached attributes for 1 second"
but this extends this to the lifetime of the lease as well as making the
caching safer.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This expands the directory caching to now cache an open handle for all
directories (up to a maximum) and not just the root directory.
In this patch, locking and refcounting is intended to work as so:
The main function to get a reference to a cached handle is
find_or_create_cached_dir() called from open_cached_dir()
These functions are protected under the cfid_list_lock spin-lock
to make sure we do not race creating new references for cached dirs
with deletion of expired ones.
An successful open_cached_dir() will take out 2 references to the cfid if
this was the very first and successful call to open the directory and
it acquired a lease from the server.
One reference is for the lease and the other is for the cfid that we
return. The is lease reference is tracked by cfid->has_lease.
If the directory already has a handle with an active lease, then we just
take out one new reference for the cfid and return it.
It can happen that we have a thread that tries to open a cached directory
where we have a cfid already but we do not, yet, have a working lease. In
this case we will just return NULL, and this the caller will fall back to
the case when no handle was available.
In this model the total number of references we have on a cfid is
1 for while the handle is open and we have a lease, and one additional
reference for each open instance of a cfid.
Once we get a lease break (cached_dir_lease_break()) we remove the
cfid from the list under the spinlock. This prevents any new threads to
use it, and we also call smb2_cached_lease_break() via the work_queue
in order to drop the reference we got for the lease (we drop it outside
of the spin-lock.)
Anytime a thread calls close_cached_dir() we also drop a reference to the
cfid.
When the last reference to the cfid is released smb2_close_cached_fid()
will be invoked which will drop the reference ot the dentry we held for
this cfid and it will also, if we the handle is open/has a lease
also call SMB2_close() to close the handle on the server.
Two events require special handling:
invalidate_all_cached_dirs() this function is called from SMB2_tdis()
and cifs_mark_open_files_invalid().
In both cases the tcon is either gone already or will be shortly so
we do not need to actually close the handles. They will be dropped
server side as part of the tcon dropping.
But we have to be careful about a potential race with a concurrent
lease break so we need to take out additional refences to avoid the
cfid from being freed while we are still referencing it.
free_cached_dirs() which is called from tconInfoFree().
This is called quite late in the umount process so there should no longer
be any open handles or files and we can just free all the remaining data.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Prevent copying past @data buffer in smb2_validate_and_copy_iov() as
the output buffer in @iov might be potentially bigger and thus copying
more bytes than requested in @minbufsize.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix uninitialised variable @idata when calling smb2_compound_op() with
SMB2_OP_POSIX_QUERY_INFO.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When creating inode for symlink, the client used to send below
requests to fill it in:
* create+query_info+close (STATUS_STOPPED_ON_SYMLINK)
* create(+reparse_flag)+query_info+close (set file attrs)
* create+ioctl(get_reparse)+close (query reparse tag)
and then for every access to the symlink dentry, the ->link() method
would send another:
* create+ioctl(get_reparse)+close (parse symlink)
So, in order to improve:
(i) Get rid of unnecessary roundtrips and then resolve symlinks as
follows:
* create+query_info+close (STATUS_STOPPED_ON_SYMLINK +
parse symlink + get reparse tag)
* create(+reparse_flag)+query_info+close (set file attrs)
(ii) Set the resolved symlink target directly in inode->i_link and
use simple_get_link() for ->link() to simply return it.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When server does not return network interfaces, clarify the
message to indicate that "multichannel not available" not just
that "empty network interface returned by server ..."
Suggested-by: Tom Talpey <tom@talpey.com>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
BZ: 215375
Fixes: 76a3c92ec9 ("cifs: remove support for NTLM and weaker authentication algorithms")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When application has done lseek() to a different offset on a directory fd
we skipped one entry too many before we start emitting directory entries
from the cache.
We need to also make sure that when we are starting to emit directory
entries from the cache, the ->pos sequence might have holes and skip
some indices.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
-----BEGIN PGP SIGNATURE-----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=8GDQ
-----END PGP SIGNATURE-----
Merge tag '6.1-rc-smb3-client-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs updates from Steve French:
- data corruption fix when cache disabled
- four RDMA (smbdirect) improvements, including enabling support for
SoftiWARP
- four signing improvements
- three directory lease improvements
- four cleanup fixes
- minor security fix
- two debugging improvements
* tag '6.1-rc-smb3-client-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6: (21 commits)
smb3: fix oops in calculating shash_setkey
cifs: secmech: use shash_desc directly, remove sdesc
smb3: rename encryption/decryption TFMs
cifs: replace kfree() with kfree_sensitive() for sensitive data
cifs: remove initialization value
cifs: Replace a couple of one-element arrays with flexible-array members
smb3: do not log confusing message when server returns no network interfaces
smb3: define missing create contexts
cifs: store a pointer to a fid in the cfid structure instead of the struct
cifs: improve handlecaching
cifs: Make tcon contain a wrapper structure cached_fids instead of cached_fid
smb3: add dynamic trace points for tree disconnect
Fix formatting of client smbdirect RDMA logging
Handle variable number of SGEs in client smbdirect send.
Reduce client smbdirect max receive segment size
Decrease the number of SMB3 smbdirect client SGEs
cifs: Fix the error length of VALIDATE_NEGOTIATE_INFO message
cifs: destage dirty pages before re-reading them for cache=none
cifs: return correct error in ->calc_signature()
MAINTAINERS: Add Tom Talpey as cifs.ko reviewer
...
- Debuggability:
- Change most occurances of BUG_ON() to WARN_ON_ONCE()
- Reorganize & fix TASK_ state comparisons, turn it into a bitmap
- Update/fix misc scheduler debugging facilities
- Load-balancing & regular scheduling:
- Improve the behavior of the scheduler in presence of lot of
SCHED_IDLE tasks - in particular they should not impact other
scheduling classes.
- Optimize task load tracking, cleanups & fixes
- Clean up & simplify misc load-balancing code
- Freezer:
- Rewrite the core freezer to behave better wrt thawing and be simpler
in general, by replacing PF_FROZEN with TASK_FROZEN & fixing/adjusting
all the fallout.
- Deadline scheduler:
- Fix the DL capacity-aware code
- Factor out dl_task_is_earliest_deadline() & replenish_dl_new_period()
- Relax/optimize locking in task_non_contending()
- Cleanups:
- Factor out the update_current_exec_runtime() helper
- Various cleanups, simplifications
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=KjMD
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Debuggability:
- Change most occurances of BUG_ON() to WARN_ON_ONCE()
- Reorganize & fix TASK_ state comparisons, turn it into a bitmap
- Update/fix misc scheduler debugging facilities
Load-balancing & regular scheduling:
- Improve the behavior of the scheduler in presence of lot of
SCHED_IDLE tasks - in particular they should not impact other
scheduling classes.
- Optimize task load tracking, cleanups & fixes
- Clean up & simplify misc load-balancing code
Freezer:
- Rewrite the core freezer to behave better wrt thawing and be
simpler in general, by replacing PF_FROZEN with TASK_FROZEN &
fixing/adjusting all the fallout.
Deadline scheduler:
- Fix the DL capacity-aware code
- Factor out dl_task_is_earliest_deadline() &
replenish_dl_new_period()
- Relax/optimize locking in task_non_contending()
Cleanups:
- Factor out the update_current_exec_runtime() helper
- Various cleanups, simplifications"
* tag 'sched-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
sched: Fix more TASK_state comparisons
sched: Fix TASK_state comparisons
sched/fair: Move call to list_last_entry() in detach_tasks
sched/fair: Cleanup loop_max and loop_break
sched/fair: Make sure to try to detach at least one movable task
sched: Show PF_flag holes
freezer,sched: Rewrite core freezer logic
sched: Widen TAKS_state literals
sched/wait: Add wait_event_state()
sched/completion: Add wait_for_completion_state()
sched: Add TASK_ANY for wait_task_inactive()
sched: Change wait_task_inactive()s match_state
freezer,umh: Clean up freezer/initrd interaction
freezer: Have {,un}lock_system_sleep() save/restore flags
sched: Rename task_running() to task_on_cpu()
sched/fair: Cleanup for SIS_PROP
sched/fair: Default to false in test_idle_cores()
sched/fair: Remove useless check in select_idle_core()
sched/fair: Avoid double search on same cpu
sched/fair: Remove redundant check in select_idle_smt()
...
shash was not being initialized in one place in smb3_calc_signature
and smb2_calc_signature
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The struct sdesc is just a wrapper around shash_desc, with exact same
memory layout. Replace the hashing TFMs with shash_desc as it's what's
passed to the crypto API anyway.
Also remove the crypto_shash pointers as they can be accessed via
shash_desc->tfm (and are actually only used in the setkey calls).
Adapt cifs_{alloc,free}_hash functions to this change.
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Detach the TFM name from a specific algorithm (AES-CCM) as
AES-GCM is also supported, making the name misleading.
s/ccmaesencrypt/enc/
s/ccmaesdecrypt/dec/
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Replace kfree with kfree_sensitive, or prepend memzero_explicit() in
other cases, when freeing sensitive material that could still be left
in memory.
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/r/202209201529.ec633796-oliver.sang@intel.com
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Don't initialize the rc as its value is being overwritten before its
use.
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
One-element arrays are deprecated, and we are replacing them with flexible
array members instead. So, replace one-element arrays with flexible-array
member in structs negotiate_req and extended_response, and refactor the
rest of the code, accordingly.
Also, make use of the DECLARE_FLEX_ARRAY() helper to declare flexible
array member EncryptionKey in union u. This new helper allows for
flexible-array members in unions.
Change pointer notation to proper array notation in a call to memcpy()
where flexible-array member DialectsArray is being used as destination
argument.
Important to mention is that doing a build before/after this patch results
in no binary output differences.
This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [1].
Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/229
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=101836 [1]
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Some servers can return an empty network interface list so, unless
multichannel is requested, no need to log an error for this, and
when multichannel is requested on mount but no interfaces, log
something less confusing. For this case change
parse_server_interfaces: malformed interface info
to
empty network interface list returned by server localhost
Also do not relog this error every ten minutes (only log on mount, once)
Cc: <stable@vger.kernel.org>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
also create a constructor that takes a path name and stores it in the fid.
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
