mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-11 12:28:41 +08:00
ab42fcb511
9991 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Gerd Bayer
|
ab42fcb511 |
s390/pci: Allow allocation of more than 1 MSI interrupt
On a PCI adapter that provides up to 8 MSI interrupt sources the s390
implementation of PCI interrupts rejected to accommodate them, although
the underlying hardware is able to support that.
For MSI-X it is sufficient to allocate a single irq_desc per msi_desc,
but for MSI multiple irq descriptors are attached to and controlled by
a single msi descriptor. Add the appropriate loops to maintain multiple
irq descriptors and tie/untie them to/from the appropriate AIBV bit, if
a device driver allocates more than 1 MSI interrupt.
Common PCI code passes on requests to allocate a number of interrupt
vectors based on the device drivers' demand and the PCI functions'
capabilities. However, the root-complex of s390 systems support just a
limited number of interrupt vectors per PCI function.
Produce a kernel log message to inform about any architecture-specific
capping that might be done.
With this change, we had a PCI adapter successfully raising
interrupts to its device driver via all 8 sources.
Fixes:
|
||
|
Gerd Bayer
|
5fd11b96b4 |
s390/pci: Refactor arch_setup_msi_irqs()
Factor out adapter interrupt allocation from arch_setup_msi_irqs() in preparation for enabling registration of multiple MSIs. Code movement only, no change of functionality intended. Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com> Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
||
Heiko Carstens
|
57e29f4c89 |
s390: Add runtime constant support
Implement the runtime constant infrastructure for s390, allowing the dcache d_hash() function to be generated using as a constant for hash table address followed by shift by a constant of the hash index. This is the s390 variant of commit |
||
Linus Torvalds
|
fbc90c042c |
- 875fa64577 ("mm/hugetlb_vmemmap: fix race with speculative PFN
walkers") is known to cause a performance regression (https://lore.kernel.org/all/3acefad9-96e5-4681-8014-827d6be71c7a@linux.ibm.com/T/#mfa809800a7862fb5bdf834c6f71a3a5113eb83ff). Yu has a fix which I'll send along later via the hotfixes branch. - In the series "mm: Avoid possible overflows in dirty throttling" Jan Kara addresses a couple of issues in the writeback throttling code. These fixes are also targetted at -stable kernels. - Ryusuke Konishi's series "nilfs2: fix potential issues related to reserved inodes" does that. This should actually be in the mm-nonmm-stable tree, along with the many other nilfs2 patches. My bad. - More folio conversions from Kefeng Wang in the series "mm: convert to folio_alloc_mpol()" - Kemeng Shi has sent some cleanups to the writeback code in the series "Add helper functions to remove repeated code and improve readability of cgroup writeback" - Kairui Song has made the swap code a little smaller and a little faster in the series "mm/swap: clean up and optimize swap cache index". - In the series "mm/memory: cleanly support zeropage in vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed()" David Hildenbrand has reworked the rather sketchy handling of the use of the zeropage in MAP_SHARED mappings. I don't see any runtime effects here - more a cleanup/understandability/maintainablity thing. - Dev Jain has improved selftests/mm/va_high_addr_switch.c's handling of higher addresses, for aarch64. The (poorly named) series is "Restructure va_high_addr_switch". - The core TLB handling code gets some cleanups and possible slight optimizations in Bang Li's series "Add update_mmu_tlb_range() to simplify code". - Jane Chu has improved the handling of our fake-an-unrecoverable-memory-error testing feature MADV_HWPOISON in the series "Enhance soft hwpoison handling and injection". - Jeff Johnson has sent a billion patches everywhere to add MODULE_DESCRIPTION() to everything. Some landed in this pull. - In the series "mm: cleanup MIGRATE_SYNC_NO_COPY mode", Kefeng Wang has simplified migration's use of hardware-offload memory copying. - Yosry Ahmed performs more folio API conversions in his series "mm: zswap: trivial folio conversions". - In the series "large folios swap-in: handle refault cases first", Chuanhua Han inches us forward in the handling of large pages in the swap code. This is a cleanup and optimization, working toward the end objective of full support of large folio swapin/out. - In the series "mm,swap: cleanup VMA based swap readahead window calculation", Huang Ying has contributed some cleanups and a possible fixlet to his VMA based swap readahead code. - In the series "add mTHP support for anonymous shmem" Baolin Wang has taught anonymous shmem mappings to use multisize THP. By default this is a no-op - users must opt in vis sysfs controls. Dramatic improvements in pagefault latency are realized. - David Hildenbrand has some cleanups to our remaining use of page_mapcount() in the series "fs/proc: move page_mapcount() to fs/proc/internal.h". - David also has some highmem accounting cleanups in the series "mm/highmem: don't track highmem pages manually". - Build-time fixes and cleanups from John Hubbard in the series "cleanups, fixes, and progress towards avoiding "make headers"". - Cleanups and consolidation of the core pagemap handling from Barry Song in the series "mm: introduce pmd|pte_needs_soft_dirty_wp helpers and utilize them". - Lance Yang's series "Reclaim lazyfree THP without splitting" has reduced the latency of the reclaim of pmd-mapped THPs under fairly common circumstances. A 10x speedup is seen in a microbenchmark. It does this by punting to aother CPU but I guess that's a win unless all CPUs are pegged. - hugetlb_cgroup cleanups from Xiu Jianfeng in the series "mm/hugetlb_cgroup: rework on cftypes". - Miaohe Lin's series "Some cleanups for memory-failure" does just that thing. - Is anyone reading this stuff? If so, email me! - Someone other than SeongJae has developed a DAMON feature in Honggyu Kim's series "DAMON based tiered memory management for CXL memory". This adds DAMON features which may be used to help determine the efficiency of our placement of CXL/PCIe attached DRAM. - DAMON user API centralization and simplificatio work in SeongJae Park's series "mm/damon: introduce DAMON parameters online commit function". - In the series "mm: page_type, zsmalloc and page_mapcount_reset()" David Hildenbrand does some maintenance work on zsmalloc - partially modernizing its use of pageframe fields. - Kefeng Wang provides more folio conversions in the series "mm: remove page_maybe_dma_pinned() and page_mkclean()". - More cleanup from David Hildenbrand, this time in the series "mm/memory_hotplug: use PageOffline() instead of PageReserved() for !ZONE_DEVICE". It "enlightens memory hotplug more about PageOffline() pages" and permits the removal of some virtio-mem hacks. - Barry Song's series "mm: clarify folio_add_new_anon_rmap() and __folio_add_anon_rmap()" is a cleanup to the anon folio handling in preparation for mTHP (multisize THP) swapin. - Kefeng Wang's series "mm: improve clear and copy user folio" implements more folio conversions, this time in the area of large folio userspace copying. - The series "Docs/mm/damon/maintaier-profile: document a mailing tool and community meetup series" tells people how to get better involved with other DAMON developers. From SeongJae Park. - A large series ("kmsan: Enable on s390") from Ilya Leoshkevich does that. - David Hildenbrand sends along more cleanups, this time against the migration code. The series is "mm/migrate: move NUMA hinting fault folio isolation + checks under PTL". - Jan Kara has found quite a lot of strangenesses and minor errors in the readahead code. He addresses this in the series "mm: Fix various readahead quirks". - SeongJae Park's series "selftests/damon: test DAMOS tried regions and {min,max}_nr_regions" adds features and addresses errors in DAMON's self testing code. - Gavin Shan has found a userspace-triggerable WARN in the pagecache code. The series "mm/filemap: Limit page cache size to that supported by xarray" addresses this. The series is marked cc:stable. - Chengming Zhou's series "mm/ksm: cmp_and_merge_page() optimizations and cleanup" cleans up and slightly optimizes KSM. - Roman Gushchin has separated the memcg-v1 and memcg-v2 code - lots of code motion. The series (which also makes the memcg-v1 code Kconfigurable) are "mm: memcg: separate legacy cgroup v1 code and put under config option" and "mm: memcg: put cgroup v1-specific memcg data under CONFIG_MEMCG_V1" - Dan Schatzberg's series "Add swappiness argument to memory.reclaim" adds an additional feature to this cgroup-v2 control file. - The series "Userspace controls soft-offline pages" from Jiaqi Yan permits userspace to stop the kernel's automatic treatment of excessive correctable memory errors. In order to permit userspace to monitor and handle this situation. - Kefeng Wang's series "mm: migrate: support poison recover from migrate folio" teaches the kernel to appropriately handle migration from poisoned source folios rather than simply panicing. - SeongJae Park's series "Docs/damon: minor fixups and improvements" does those things. - In the series "mm/zsmalloc: change back to per-size_class lock" Chengming Zhou improves zsmalloc's scalability and memory utilization. - Vivek Kasireddy's series "mm/gup: Introduce memfd_pin_folios() for pinning memfd folios" makes the GUP code use FOLL_PIN rather than bare refcount increments. So these paes can first be moved aside if they reside in the movable zone or a CMA block. - Andrii Nakryiko has added a binary ioctl()-based API to /proc/pid/maps for much faster reading of vma information. The series is "query VMAs from /proc/<pid>/maps". - In the series "mm: introduce per-order mTHP split counters" Lance Yang improves the kernel's presentation of developer information related to multisize THP splitting. - Michael Ellerman has developed the series "Reimplement huge pages without hugepd on powerpc (8xx, e500, book3s/64)". This permits userspace to use all available huge page sizes. - In the series "revert unconditional slab and page allocator fault injection calls" Vlastimil Babka removes a performance-affecting and not very useful feature from slab fault injection. -----BEGIN PGP SIGNATURE----- iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZp2C+QAKCRDdBJ7gKXxA joTkAQDvjqOoFStqk4GU3OXMYB7WCU/ZQMFG0iuu1EEwTVDZ4QEA8CnG7seek1R3 xEoo+vw0sWWeLV3qzsxnCA1BJ8cTJA8= =z0Lf -----END PGP SIGNATURE----- Merge tag 'mm-stable-2024-07-21-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull MM updates from Andrew Morton: - In the series "mm: Avoid possible overflows in dirty throttling" Jan Kara addresses a couple of issues in the writeback throttling code. These fixes are also targetted at -stable kernels. - Ryusuke Konishi's series "nilfs2: fix potential issues related to reserved inodes" does that. This should actually be in the mm-nonmm-stable tree, along with the many other nilfs2 patches. My bad. - More folio conversions from Kefeng Wang in the series "mm: convert to folio_alloc_mpol()" - Kemeng Shi has sent some cleanups to the writeback code in the series "Add helper functions to remove repeated code and improve readability of cgroup writeback" - Kairui Song has made the swap code a little smaller and a little faster in the series "mm/swap: clean up and optimize swap cache index". - In the series "mm/memory: cleanly support zeropage in vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed()" David Hildenbrand has reworked the rather sketchy handling of the use of the zeropage in MAP_SHARED mappings. I don't see any runtime effects here - more a cleanup/understandability/maintainablity thing. - Dev Jain has improved selftests/mm/va_high_addr_switch.c's handling of higher addresses, for aarch64. The (poorly named) series is "Restructure va_high_addr_switch". - The core TLB handling code gets some cleanups and possible slight optimizations in Bang Li's series "Add update_mmu_tlb_range() to simplify code". - Jane Chu has improved the handling of our fake-an-unrecoverable-memory-error testing feature MADV_HWPOISON in the series "Enhance soft hwpoison handling and injection". - Jeff Johnson has sent a billion patches everywhere to add MODULE_DESCRIPTION() to everything. Some landed in this pull. - In the series "mm: cleanup MIGRATE_SYNC_NO_COPY mode", Kefeng Wang has simplified migration's use of hardware-offload memory copying. - Yosry Ahmed performs more folio API conversions in his series "mm: zswap: trivial folio conversions". - In the series "large folios swap-in: handle refault cases first", Chuanhua Han inches us forward in the handling of large pages in the swap code. This is a cleanup and optimization, working toward the end objective of full support of large folio swapin/out. - In the series "mm,swap: cleanup VMA based swap readahead window calculation", Huang Ying has contributed some cleanups and a possible fixlet to his VMA based swap readahead code. - In the series "add mTHP support for anonymous shmem" Baolin Wang has taught anonymous shmem mappings to use multisize THP. By default this is a no-op - users must opt in vis sysfs controls. Dramatic improvements in pagefault latency are realized. - David Hildenbrand has some cleanups to our remaining use of page_mapcount() in the series "fs/proc: move page_mapcount() to fs/proc/internal.h". - David also has some highmem accounting cleanups in the series "mm/highmem: don't track highmem pages manually". - Build-time fixes and cleanups from John Hubbard in the series "cleanups, fixes, and progress towards avoiding "make headers"". - Cleanups and consolidation of the core pagemap handling from Barry Song in the series "mm: introduce pmd|pte_needs_soft_dirty_wp helpers and utilize them". - Lance Yang's series "Reclaim lazyfree THP without splitting" has reduced the latency of the reclaim of pmd-mapped THPs under fairly common circumstances. A 10x speedup is seen in a microbenchmark. It does this by punting to aother CPU but I guess that's a win unless all CPUs are pegged. - hugetlb_cgroup cleanups from Xiu Jianfeng in the series "mm/hugetlb_cgroup: rework on cftypes". - Miaohe Lin's series "Some cleanups for memory-failure" does just that thing. - Someone other than SeongJae has developed a DAMON feature in Honggyu Kim's series "DAMON based tiered memory management for CXL memory". This adds DAMON features which may be used to help determine the efficiency of our placement of CXL/PCIe attached DRAM. - DAMON user API centralization and simplificatio work in SeongJae Park's series "mm/damon: introduce DAMON parameters online commit function". - In the series "mm: page_type, zsmalloc and page_mapcount_reset()" David Hildenbrand does some maintenance work on zsmalloc - partially modernizing its use of pageframe fields. - Kefeng Wang provides more folio conversions in the series "mm: remove page_maybe_dma_pinned() and page_mkclean()". - More cleanup from David Hildenbrand, this time in the series "mm/memory_hotplug: use PageOffline() instead of PageReserved() for !ZONE_DEVICE". It "enlightens memory hotplug more about PageOffline() pages" and permits the removal of some virtio-mem hacks. - Barry Song's series "mm: clarify folio_add_new_anon_rmap() and __folio_add_anon_rmap()" is a cleanup to the anon folio handling in preparation for mTHP (multisize THP) swapin. - Kefeng Wang's series "mm: improve clear and copy user folio" implements more folio conversions, this time in the area of large folio userspace copying. - The series "Docs/mm/damon/maintaier-profile: document a mailing tool and community meetup series" tells people how to get better involved with other DAMON developers. From SeongJae Park. - A large series ("kmsan: Enable on s390") from Ilya Leoshkevich does that. - David Hildenbrand sends along more cleanups, this time against the migration code. The series is "mm/migrate: move NUMA hinting fault folio isolation + checks under PTL". - Jan Kara has found quite a lot of strangenesses and minor errors in the readahead code. He addresses this in the series "mm: Fix various readahead quirks". - SeongJae Park's series "selftests/damon: test DAMOS tried regions and {min,max}_nr_regions" adds features and addresses errors in DAMON's self testing code. - Gavin Shan has found a userspace-triggerable WARN in the pagecache code. The series "mm/filemap: Limit page cache size to that supported by xarray" addresses this. The series is marked cc:stable. - Chengming Zhou's series "mm/ksm: cmp_and_merge_page() optimizations and cleanup" cleans up and slightly optimizes KSM. - Roman Gushchin has separated the memcg-v1 and memcg-v2 code - lots of code motion. The series (which also makes the memcg-v1 code Kconfigurable) are "mm: memcg: separate legacy cgroup v1 code and put under config option" and "mm: memcg: put cgroup v1-specific memcg data under CONFIG_MEMCG_V1" - Dan Schatzberg's series "Add swappiness argument to memory.reclaim" adds an additional feature to this cgroup-v2 control file. - The series "Userspace controls soft-offline pages" from Jiaqi Yan permits userspace to stop the kernel's automatic treatment of excessive correctable memory errors. In order to permit userspace to monitor and handle this situation. - Kefeng Wang's series "mm: migrate: support poison recover from migrate folio" teaches the kernel to appropriately handle migration from poisoned source folios rather than simply panicing. - SeongJae Park's series "Docs/damon: minor fixups and improvements" does those things. - In the series "mm/zsmalloc: change back to per-size_class lock" Chengming Zhou improves zsmalloc's scalability and memory utilization. - Vivek Kasireddy's series "mm/gup: Introduce memfd_pin_folios() for pinning memfd folios" makes the GUP code use FOLL_PIN rather than bare refcount increments. So these paes can first be moved aside if they reside in the movable zone or a CMA block. - Andrii Nakryiko has added a binary ioctl()-based API to /proc/pid/maps for much faster reading of vma information. The series is "query VMAs from /proc/<pid>/maps". - In the series "mm: introduce per-order mTHP split counters" Lance Yang improves the kernel's presentation of developer information related to multisize THP splitting. - Michael Ellerman has developed the series "Reimplement huge pages without hugepd on powerpc (8xx, e500, book3s/64)". This permits userspace to use all available huge page sizes. - In the series "revert unconditional slab and page allocator fault injection calls" Vlastimil Babka removes a performance-affecting and not very useful feature from slab fault injection. * tag 'mm-stable-2024-07-21-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (411 commits) mm/mglru: fix ineffective protection calculation mm/zswap: fix a white space issue mm/hugetlb: fix kernel NULL pointer dereference when migrating hugetlb folio mm/hugetlb: fix possible recursive locking detected warning mm/gup: clear the LRU flag of a page before adding to LRU batch mm/numa_balancing: teach mpol_to_str about the balancing mode mm: memcg1: convert charge move flags to unsigned long long alloc_tag: fix page_ext_get/page_ext_put sequence during page splitting lib: reuse page_ext_data() to obtain codetag_ref lib: add missing newline character in the warning message mm/mglru: fix overshooting shrinker memory mm/mglru: fix div-by-zero in vmpressure_calc_level() mm/kmemleak: replace strncpy() with strscpy() mm, page_alloc: put should_fail_alloc_page() back behing CONFIG_FAIL_PAGE_ALLOC mm, slab: put should_failslab() back behind CONFIG_SHOULD_FAILSLAB mm: ignore data-race in __swap_writepage hugetlbfs: ensure generic_hugetlb_get_unmapped_area() returns higher address than mmap_min_addr mm: shmem: rename mTHP shmem counters mm: swap_state: use folio_alloc_mpol() in __read_swap_cache_async() mm/migrate: putback split folios when numa hint migration fails ... |
||
|
Linus Torvalds
|
2c9b351240 |
ARM:
* Initial infrastructure for shadow stage-2 MMUs, as part of nested virtualization enablement * Support for userspace changes to the guest CTR_EL0 value, enabling (in part) migration of VMs between heterogenous hardware * Fixes + improvements to pKVM's FF-A proxy, adding support for v1.1 of the protocol * FPSIMD/SVE support for nested, including merged trap configuration and exception routing * New command-line parameter to control the WFx trap behavior under KVM * Introduce kCFI hardening in the EL2 hypervisor * Fixes + cleanups for handling presence/absence of FEAT_TCRX * Miscellaneous fixes + documentation updates LoongArch: * Add paravirt steal time support. * Add support for KVM_DIRTY_LOG_INITIALLY_SET. * Add perf kvm-stat support for loongarch. RISC-V: * Redirect AMO load/store access fault traps to guest * perf kvm stat support * Use guest files for IMSIC virtualization, when available ONE_REG support for the Zimop, Zcmop, Zca, Zcf, Zcd, Zcb and Zawrs ISA extensions is coming through the RISC-V tree. s390: * Assortment of tiny fixes which are not time critical x86: * Fixes for Xen emulation. * Add a global struct to consolidate tracking of host values, e.g. EFER * Add KVM_CAP_X86_APIC_BUS_CYCLES_NS to allow configuring the effective APIC bus frequency, because TDX. * Print the name of the APICv/AVIC inhibits in the relevant tracepoint. * Clean up KVM's handling of vendor specific emulation to consistently act on "compatible with Intel/AMD", versus checking for a specific vendor. * Drop MTRR virtualization, and instead always honor guest PAT on CPUs that support self-snoop. * Update to the newfangled Intel CPU FMS infrastructure. * Don't advertise IA32_PERF_GLOBAL_OVF_CTRL as an MSR-to-be-saved, as it reads '0' and writes from userspace are ignored. * Misc cleanups x86 - MMU: * Small cleanups, renames and refactoring extracted from the upcoming Intel TDX support. * Don't allocate kvm_mmu_page.shadowed_translation for shadow pages that can't hold leafs SPTEs. * Unconditionally drop mmu_lock when allocating TDP MMU page tables for eager page splitting, to avoid stalling vCPUs when splitting huge pages. * Bug the VM instead of simply warning if KVM tries to split a SPTE that is non-present or not-huge. KVM is guaranteed to end up in a broken state because the callers fully expect a valid SPTE, it's all but dangerous to let more MMU changes happen afterwards. x86 - AMD: * Make per-CPU save_area allocations NUMA-aware. * Force sev_es_host_save_area() to be inlined to avoid calling into an instrumentable function from noinstr code. * Base support for running SEV-SNP guests. API-wise, this includes a new KVM_X86_SNP_VM type, encrypting/measure the initial image into guest memory, and finalizing it before launching it. Internally, there are some gmem/mmu hooks needed to prepare gmem-allocated pages before mapping them into guest private memory ranges. This includes basic support for attestation guest requests, enough to say that KVM supports the GHCB 2.0 specification. There is no support yet for loading into the firmware those signing keys to be used for attestation requests, and therefore no need yet for the host to provide certificate data for those keys. To support fetching certificate data from userspace, a new KVM exit type will be needed to handle fetching the certificate from userspace. An attempt to define a new KVM_EXIT_COCO/KVM_EXIT_COCO_REQ_CERTS exit type to handle this was introduced in v1 of this patchset, but is still being discussed by community, so for now this patchset only implements a stub version of SNP Extended Guest Requests that does not provide certificate data. x86 - Intel: * Remove an unnecessary EPT TLB flush when enabling hardware. * Fix a series of bugs that cause KVM to fail to detect nested pending posted interrupts as valid wake eents for a vCPU executing HLT in L2 (with HLT-exiting disable by L1). * KVM: x86: Suppress MMIO that is triggered during task switch emulation Explicitly suppress userspace emulated MMIO exits that are triggered when emulating a task switch as KVM doesn't support userspace MMIO during complex (multi-step) emulation. Silently ignoring the exit request can result in the WARN_ON_ONCE(vcpu->mmio_needed) firing if KVM exits to userspace for some other reason prior to purging mmio_needed. See commit |
||
|
Linus Torvalds
|
1c7d0c3af5 |
s390 updates for 6.11 merge window
- Remove restrictions on PAI NNPA and crypto counters, enabling
concurrent per-task and system-wide sampling and counting events
- Switch to GENERIC_CPU_DEVICES by setting up the CPU present mask in
the architecture code and letting the generic code handle CPU bring-up
- Add support for the diag204 busy indication facility to prevent
undesirable blocking during hypervisor logical CPU utilization
queries. Implement results caching
- Improve the handling of Store Data SCLP events by suppressing
unnecessary warning, preventing buffer release in I/O during failures,
and adding timeout handling for Store Data requests to address potential
firmware issues
- Provide optimized __arch_hweight*() implementations
- Remove the unnecessary CPU KOBJ_CHANGE uevents generated during topology
updates, as they are unused and also not present on other architectures
- Cleanup atomic_ops, optimize __atomic_set() for small values and
__atomic_cmpxchg_bool() for compilers supporting flag output constraint
- Couple of cleanups for KVM:
- Move and improve KVM struct definitions for DAT tables from gaccess.c
to a new header
- Pass the asce as parameter to sie64a()
- Make the crdte() and cspg() page table handling wrappers return a
boolean to indicate success, like the other existing "compare and swap"
wrappers
- Add documentation for HWCAP flags
- Switch to obtaining total RAM pages from memblock instead of
totalram_pages() during mm init, to ensure correct calculation of zero
page size, when defer_init is enabled
- Refactor lowcore access and switch to using the get_lowcore() function
instead of the S390_lowcore macro
- Cleanups for PG_arch_1 and folio handling in UV and hugetlb code
- Add missing MODULE_DESCRIPTION() macros
- Fix VM_FAULT_HWPOISON handling in do_exception()
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmaYGegACgkQjYWKoQLX
FBjCwwf/aRYoLIXCa9/nHGWFiUjZm6xBgVwZh55bXjfNG9TI2J9UZSsYlOFGUJKl
gvD2Ym+LqAejK8R4EUHkfD6ftaKMQuIxNDoedxhwuSpfOQ2mZ5teu0MxTh8QcUAx
4Y2w5XEeCuqE3SuoZ4SJa58K4rGl4cFpPsKNa8ofdzH1ZLFNe8Wqzis4kh0htqLb
FtPj6nsgfzQ5kg14rVkGxCa4CqoFxonXgsA6nH6xZLbxKUInyq8uV44UBQ+aJq5v
dsdzZ5XuAJHN2FpBuuOYQYZYw3XIy/kka7o4EjffORi5SGCRMWO4Zt0P6HXaNkh6
xV8EEO8myeo7rV8dnrk1V4yGjGJmfA==
=3IGY
-----END PGP SIGNATURE-----
Merge tag 's390-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Remove restrictions on PAI NNPA and crypto counters, enabling
concurrent per-task and system-wide sampling and counting events
- Switch to GENERIC_CPU_DEVICES by setting up the CPU present mask in
the architecture code and letting the generic code handle CPU
bring-up
- Add support for the diag204 busy indication facility to prevent
undesirable blocking during hypervisor logical CPU utilization
queries. Implement results caching
- Improve the handling of Store Data SCLP events by suppressing
unnecessary warning, preventing buffer release in I/O during
failures, and adding timeout handling for Store Data requests to
address potential firmware issues
- Provide optimized __arch_hweight*() implementations
- Remove the unnecessary CPU KOBJ_CHANGE uevents generated during
topology updates, as they are unused and also not present on other
architectures
- Cleanup atomic_ops, optimize __atomic_set() for small values and
__atomic_cmpxchg_bool() for compilers supporting flag output
constraint
- Couple of cleanups for KVM:
- Move and improve KVM struct definitions for DAT tables from
gaccess.c to a new header
- Pass the asce as parameter to sie64a()
- Make the crdte() and cspg() page table handling wrappers return a
boolean to indicate success, like the other existing "compare and
swap" wrappers
- Add documentation for HWCAP flags
- Switch to obtaining total RAM pages from memblock instead of
totalram_pages() during mm init, to ensure correct calculation of
zero page size, when defer_init is enabled
- Refactor lowcore access and switch to using the get_lowcore()
function instead of the S390_lowcore macro
- Cleanups for PG_arch_1 and folio handling in UV and hugetlb code
- Add missing MODULE_DESCRIPTION() macros
- Fix VM_FAULT_HWPOISON handling in do_exception()
* tag 's390-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (54 commits)
s390/mm: Fix VM_FAULT_HWPOISON handling in do_exception()
s390/kvm: Move bitfields for dat tables
s390/entry: Pass the asce as parameter to sie64a()
s390/sthyi: Use cached data when diag is busy
s390/sthyi: Move diag operations
s390/hypfs_diag: Diag204 busy loop
s390/diag: Add busy-indication-facility requirements
s390/diag: Diag204 add busy return errno
s390/diag: Return errno's from diag204
s390/sclp: Diag204 busy indication facility detection
s390/atomic_ops: Make use of flag output constraint
s390/atomic_ops: Improve __atomic_set() for small values
s390/atomic_ops: Use symbolic names
s390/smp: Switch to GENERIC_CPU_DEVICES
s390/hwcaps: Add documentation for HWCAP flags
s390/pgtable: Make crdte() and cspg() return a value
s390/topology: Remove CPU KOBJ_CHANGE uevents
s390/sclp: Add timeout to Store Data requests
s390/sclp: Prevent release of buffer in I/O
s390/sclp: Suppress unnecessary Store Data warning
...
|
||
|
Linus Torvalds
|
70045bfc4c |
ftrace: Rewrite of function graph tracer
Up until now, the function graph tracer could only have a single user attached to it. If another user tried to attach to the function graph tracer while one was already attached, it would fail. Allowing function graph tracer to have more than one user has been asked for since 2009, but it required a rewrite to the logic to pull it off so it never happened. Until now! There's three systems that trace the return of a function. That is kretprobes, function graph tracer, and BPF. kretprobes and function graph tracing both do it similarly. The difference is that kretprobes uses a shadow stack per callback and function graph tracer creates a shadow stack for all tasks. The function graph tracer method makes it possible to trace the return of all functions. As kretprobes now needs that feature too, allowing it to use function graph tracer was needed. BPF also wants to trace the return of many probes and its method doesn't scale either. Having it use function graph tracer would improve that. By allowing function graph tracer to have multiple users allows both kretprobes and BPF to use function graph tracer in these cases. This will allow kretprobes code to be removed in the future as it's version will no longer be needed. Note, function graph tracer is only limited to 16 simultaneous users, due to shadow stack size and allocated slots. -----BEGIN PGP SIGNATURE----- iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZpbWlxQccm9zdGVkdEBn b29kbWlzLm9yZwAKCRAp5XQQmuv6qgtvAP9jxmgEiEhz4Bpe1vRKVSMYK6ozXHTT 7MFKRMeQqQ8zeAEA2sD5Zrt9l7zKzg0DFpaDLgc3/yh14afIDxzTlIvkmQ8= =umuf -----END PGP SIGNATURE----- Merge tag 'ftrace-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull ftrace updates from Steven Rostedt: "Rewrite of function graph tracer to allow multiple users Up until now, the function graph tracer could only have a single user attached to it. If another user tried to attach to the function graph tracer while one was already attached, it would fail. Allowing function graph tracer to have more than one user has been asked for since 2009, but it required a rewrite to the logic to pull it off so it never happened. Until now! There's three systems that trace the return of a function. That is kretprobes, function graph tracer, and BPF. kretprobes and function graph tracing both do it similarly. The difference is that kretprobes uses a shadow stack per callback and function graph tracer creates a shadow stack for all tasks. The function graph tracer method makes it possible to trace the return of all functions. As kretprobes now needs that feature too, allowing it to use function graph tracer was needed. BPF also wants to trace the return of many probes and its method doesn't scale either. Having it use function graph tracer would improve that. By allowing function graph tracer to have multiple users allows both kretprobes and BPF to use function graph tracer in these cases. This will allow kretprobes code to be removed in the future as it's version will no longer be needed. Note, function graph tracer is only limited to 16 simultaneous users, due to shadow stack size and allocated slots" * tag 'ftrace-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (49 commits) fgraph: Use str_plural() in test_graph_storage_single() function_graph: Add READ_ONCE() when accessing fgraph_array[] ftrace: Add missing kerneldoc parameters to unregister_ftrace_direct() function_graph: Everyone uses HAVE_FUNCTION_GRAPH_RET_ADDR_PTR, remove it function_graph: Fix up ftrace_graph_ret_addr() function_graph: Make fgraph_update_pid_func() a stub for !DYNAMIC_FTRACE function_graph: Rename BYTE_NUMBER to CHAR_NUMBER in selftests fgraph: Remove some unused functions ftrace: Hide one more entry in stack trace when ftrace_pid is enabled function_graph: Do not update pid func if CONFIG_DYNAMIC_FTRACE not enabled function_graph: Make fgraph_do_direct static key static ftrace: Fix prototypes for ftrace_startup/shutdown_subops() ftrace: Assign RCU list variable with rcu_assign_ptr() ftrace: Assign ftrace_list_end to ftrace_ops_list type cast to RCU ftrace: Declare function_trace_op in header to quiet sparse warning ftrace: Add comments to ftrace_hash_move() and friends ftrace: Convert "inc" parameter to bool in ftrace_hash_rec_update_modify() ftrace: Add comments to ftrace_hash_rec_disable/enable() ftrace: Remove "filter_hash" parameter from __ftrace_hash_rec_update() ftrace: Rename dup_hash() and comment it ... |
||
Gerald Schaefer
|
df39038cd8 |
s390/mm: Fix VM_FAULT_HWPOISON handling in do_exception()
There is no support for HWPOISON, MEMORY_FAILURE, or ARCH_HAS_COPY_MC on s390. Therefore we do not expect to see VM_FAULT_HWPOISON in do_exception(). However, since commit |
||
|
Linus Torvalds
|
51835949dd |
Networking changes for 6.11. Not much excitement - a handful of large
patchsets (devmem among them) did not make it in time.
Core & protocols
----------------
- Use local_lock in addition to local_bh_disable() to protect per-CPU
resources in networking, a step closer for local_bh_disable() not
to act as a big lock on PREEMPT_RT.
- Use flex array for netdevice priv area, ensure its cache alignment.
- Add a sysctl knob to allow user to specify a default rto_min at socket
init time. Bit of a big hammer but multiple companies were
independently carrying such patch downstream so clearly it's useful.
- Support scheduling transmission of packets based on CLOCK_TAI.
- Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned off
using cpusets.
- Support multiple L2TPv3 UDP tunnels using the same 5-tuple address.
- Allow configuration of multipath hash seed, to both allow synchronizing
hashing of two routers, and preventing partial accidental sync.
- Improve TCP compliance with RFC 9293 for simultaneous connect().
- Support sending NAT keepalives in IPsec ESP in UDP states. Userspace
IKE daemon had to do this before, but the kernel can better keep
track of it.
- Support sending supervision HSR frames with MAC addresses stored in
ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled.
- Introduce IPPROTO_SMC for selecting SMC when socket is created.
- Allow UDP GSO transmit from devices with no checksum offload.
- openvswitch: add packet sampling via psample, separating the sampled
traffic from "upcall" packets sent to user space for forwarding.
- nf_tables: shrink memory consumption for transaction objects.
Things we sprinkled into general kernel code
--------------------------------------------
- Power Sequencing subsystem (used by Qualcomm Bluetooth driver
for QCA6390).
- Add IRQ information in sysfs for auxiliary bus.
- Introduce guard definition for local_lock.
- Add aligned flavor of __cacheline_group_{begin, end}() markings for
grouping fields in structures.
BPF
---
- Notify user space (via epoll) when a struct_ops object is getting
detached/unregistered.
- Add new kfuncs for a generic, open-coded bits iterator.
- Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
bpf_list_head.
- Support resilient split BTF which cuts down on duplication and makes
BTF as compact as possible WRT BTF from modules.
- Add support for dumping kfunc prototypes from BTF which enables both
detecting as well as dumping compilable prototypes for kfuncs.
- riscv64 BPF JIT improvements in particular to add 12-argument support
for BPF trampolines and to utilize bpf_prog_pack for the latter.
- Add the capability to offload the netfilter flowtable in XDP layer
through kfuncs.
Driver API
----------
- Allow users to configure IRQ tresholds between which automatic IRQ
moderation can choose.
- Expand Power Sourcing (PoE) status with power, class and failure
reason. Support setting power limits.
- Track additional RSS contexts in the core, make sure configuration
changes don't break them.
- Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated ESP
data paths.
- Support updating firmware on SFP modules.
Tests and tooling
-----------------
- mptcp: use net/lib.sh to manage netns.
- TCP-AO and TCP-MD5: replace debug prints used by tests with
tracepoints.
- openvswitch: make test self-contained (don't depend on OvS CLI tools).
Drivers
-------
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- increase the max total outstanding PTP TX packets to 4
- add timestamping statistics support
- implement netdev_queue_mgmt_ops
- support new RSS context API
- Intel (100G, ice, idpf):
- implement FEC statistics and dumping signal quality indicators
- support E825C products (with 56Gbps PHYs)
- nVidia/Mellanox:
- support HW-GRO
- mlx4/mlx5: support per-queue statistics via netlink
- obey the max number of EQs setting in sub-functions
- AMD/Solarflare:
- support new RSS context API
- AMD/Pensando:
- ionic: rework fix for doorbell miss to lower overhead
and skip it on new HW
- Wangxun:
- txgbe: support Flow Director perfect filters
- Ethernet NICs consumer, embedded and virtual:
- Add driver for Tehuti Networks TN40xx chips
- Add driver for Meta's internal NIC chips
- Add driver for Ethernet MAC on Airoha EN7581 SoCs
- Add driver for Renesas Ethernet-TSN devices
- Google cloud vNIC:
- flow steering support
- Microsoft vNIC:
- support page sizes other than 4KB on ARM64
- vmware vNIC:
- support latency measurement (update to version 9)
- VirtIO net:
- support for Byte Queue Limits
- support configuring thresholds for automatic IRQ moderation
- support for AF_XDP Rx zero-copy
- Synopsys (stmmac):
- support for STM32MP13 SoC
- let platforms select the right PCS implementation
- TI:
- icssg-prueth: add multicast filtering support
- icssg-prueth: enable PTP timestamping and PPS
- Renesas:
- ravb: improve Rx performance 30-400% by using page pool,
theaded NAPI and timer-based IRQ coalescing
- ravb: add MII support for R-Car V4M
- Cadence (macb):
- macb: add ARP support to Wake-On-LAN
- Cortina:
- use phylib for RX and TX pause configuration
- Ethernet switches:
- nVidia/Mellanox:
- support configuration of multipath hash seed
- report more accurate max MTU
- use page_pool to improve Rx performance
- MediaTek:
- mt7530: add support for bridge port isolation
- Qualcomm:
- qca8k: add support for bridge port isolation
- Microchip:
- lan9371/2: add 100BaseTX PHY support
- NXP:
- vsc73xx: implement VLAN operations
- Ethernet PHYs:
- aquantia: enable support for aqr115c
- aquantia: add support for PHY LEDs
- realtek: add support for rtl8224 2.5Gbps PHY
- xpcs: add memory-mapped device support
- add BroadR-Reach link mode and support in Broadcom's PHY driver
- CAN:
- add document for ISO 15765-2 protocol support
- mcp251xfd: workaround for erratum DS80000789E, use timestamps
to catch when device returns incorrect FIFO status
- WiFi:
- mac80211/cfg80211:
- parse Transmit Power Envelope (TPE) data in mac80211 instead of
in drivers
- improvements for 6 GHz regulatory flexibility
- multi-link improvements
- support multiple radios per wiphy
- remove DEAUTH_NEED_MGD_TX_PREP flag
- Intel (iwlwifi):
- bump FW API to 91 for BZ/SC devices
- report 64-bit radiotap timestamp
- enable P2P low latency by default
- handle Transmit Power Envelope (TPE) advertised by AP
- remove support for older FW for new devices
- fast resume (keeping the device configured)
- mvm: re-enable Multi-Link Operation (MLO)
- aggregation (A-MSDU) optimizations
- MediaTek (mt76):
- mt7925 Multi-Link Operation (MLO) support
- Qualcomm (ath10k):
- LED support for various chipsets
- Qualcomm (ath12k):
- remove unsupported Tx monitor handling
- support channel 2 in 6 GHz band
- support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
- supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
Advertisements (EMA)
- support dynamic VLAN
- add panic handler for resetting the firmware state
- DebugFS support for datapath statistics
- WCN7850: support for Wake on WLAN
- Microchip (wilc1000):
- read MAC address during probe to make it visible to user space
- suspend/resume improvements
- TI (wl18xx):
- support newer firmware versions
- RealTek (rtw89):
- preparation for RTL8852BE-VT support
- Wake on WLAN support for WiFi 6 chips
- 36-bit PCI DMA support
- RealTek (rtlwifi):
- RTL8192DU support
- Broadcom (brcmfmac):
- Management Frame Protection support (to enable WPA3)
- Bluetooth:
- qualcomm: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: add BCM4388 support
- btintel: add support for BlazarU core
- btintel: add support for Whale Peak2
- btnxpuart: add support for AW693 A1 chipset
- btnxpuart: add support for IW615 chipset
- btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmaWjBwACgkQMUZtbf5S
IrvuSRAAkJuEzTRqgURBCe4eNEQde6mJJig7l2CKHwCbFiHZpRkFHf8qKbcGWbL6
uLW33SWnKtJVDhxVKWHLq635XW7BAa80YhqGw21GDi+mIEhWXZglHj3xbXNxsMfE
4eg/kG4BkfYWFmHaXOwVWV/mr7nXf6j7WmXNeXEi32ufE1j0OL+YlQenKnMj8yP2
j9JmYa2Chwppng1SblHmcjmGkdNVwFhStKeCG+2K7v06wdDH/QYBlbgUv9gw/cxp
NlW//wgiaeX40U4O3kDwt9C+LDoh+0VrDDeVdQ+IsScLtY3PhAzEoKolFYTq2HSr
I1JpoaHNnyNsJq3DZrACQ5WlH4yDn6C2EUB6dxNnFaI9F1ZPsi+7MTl6Sei1AklD
TuQTj/lxOACBwW2Q77NU72uoxiIUauesGPHcnrAFuoCIEhZF0mso7k59BvrXhsOP
QwcLbQdc1YHNkqv/Vc7NBY+ruMsYB+5Ubbhhj2p27dp/CWFIwxI29fze4dn2uhO6
ejHN3mbqwPdSzg12YJtM6Iq61Cnwo2eVSvhTxl+ZVSZtI4nu2arzR+y7QTYmNrXP
6tkgVN9UsWeLl2xJ8wyyqL5mcvNHP2rPXWZ2X56iTaa26m+UlleeQ7YRaYtQAAr0
Ec/vlDMX64SwHhd+qwE99DXGQf2g+KklHKSLsnajJUVrWFTlRI0=
=opz8
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Not much excitement - a handful of large patchsets (devmem among them)
did not make it in time.
Core & protocols:
- Use local_lock in addition to local_bh_disable() to protect per-CPU
resources in networking, a step closer for local_bh_disable() not
to act as a big lock on PREEMPT_RT
- Use flex array for netdevice priv area, ensure its cache alignment
- Add a sysctl knob to allow user to specify a default rto_min at
socket init time. Bit of a big hammer but multiple companies were
independently carrying such patch downstream so clearly it's useful
- Support scheduling transmission of packets based on CLOCK_TAI
- Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned
off using cpusets
- Support multiple L2TPv3 UDP tunnels using the same 5-tuple address
- Allow configuration of multipath hash seed, to both allow
synchronizing hashing of two routers, and preventing partial
accidental sync
- Improve TCP compliance with RFC 9293 for simultaneous connect()
- Support sending NAT keepalives in IPsec ESP in UDP states.
Userspace IKE daemon had to do this before, but the kernel can
better keep track of it
- Support sending supervision HSR frames with MAC addresses stored in
ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled
- Introduce IPPROTO_SMC for selecting SMC when socket is created
- Allow UDP GSO transmit from devices with no checksum offload
- openvswitch: add packet sampling via psample, separating the
sampled traffic from "upcall" packets sent to user space for
forwarding
- nf_tables: shrink memory consumption for transaction objects
Things we sprinkled into general kernel code:
- Power Sequencing subsystem (used by Qualcomm Bluetooth driver for
QCA6390) [ Already merged separately - Linus ]
- Add IRQ information in sysfs for auxiliary bus
- Introduce guard definition for local_lock
- Add aligned flavor of __cacheline_group_{begin, end}() markings for
grouping fields in structures
BPF:
- Notify user space (via epoll) when a struct_ops object is getting
detached/unregistered
- Add new kfuncs for a generic, open-coded bits iterator
- Enable BPF programs to declare arrays of kptr, bpf_rb_root, and
bpf_list_head
- Support resilient split BTF which cuts down on duplication and
makes BTF as compact as possible WRT BTF from modules
- Add support for dumping kfunc prototypes from BTF which enables
both detecting as well as dumping compilable prototypes for kfuncs
- riscv64 BPF JIT improvements in particular to add 12-argument
support for BPF trampolines and to utilize bpf_prog_pack for the
latter
- Add the capability to offload the netfilter flowtable in XDP layer
through kfuncs
Driver API:
- Allow users to configure IRQ tresholds between which automatic IRQ
moderation can choose
- Expand Power Sourcing (PoE) status with power, class and failure
reason. Support setting power limits
- Track additional RSS contexts in the core, make sure configuration
changes don't break them
- Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated
ESP data paths
- Support updating firmware on SFP modules
Tests and tooling:
- mptcp: use net/lib.sh to manage netns
- TCP-AO and TCP-MD5: replace debug prints used by tests with
tracepoints
- openvswitch: make test self-contained (don't depend on OvS CLI
tools)
Drivers:
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- increase the max total outstanding PTP TX packets to 4
- add timestamping statistics support
- implement netdev_queue_mgmt_ops
- support new RSS context API
- Intel (100G, ice, idpf):
- implement FEC statistics and dumping signal quality indicators
- support E825C products (with 56Gbps PHYs)
- nVidia/Mellanox:
- support HW-GRO
- mlx4/mlx5: support per-queue statistics via netlink
- obey the max number of EQs setting in sub-functions
- AMD/Solarflare:
- support new RSS context API
- AMD/Pensando:
- ionic: rework fix for doorbell miss to lower overhead and
skip it on new HW
- Wangxun:
- txgbe: support Flow Director perfect filters
- Ethernet NICs consumer, embedded and virtual:
- Add driver for Tehuti Networks TN40xx chips
- Add driver for Meta's internal NIC chips
- Add driver for Ethernet MAC on Airoha EN7581 SoCs
- Add driver for Renesas Ethernet-TSN devices
- Google cloud vNIC:
- flow steering support
- Microsoft vNIC:
- support page sizes other than 4KB on ARM64
- vmware vNIC:
- support latency measurement (update to version 9)
- VirtIO net:
- support for Byte Queue Limits
- support configuring thresholds for automatic IRQ moderation
- support for AF_XDP Rx zero-copy
- Synopsys (stmmac):
- support for STM32MP13 SoC
- let platforms select the right PCS implementation
- TI:
- icssg-prueth: add multicast filtering support
- icssg-prueth: enable PTP timestamping and PPS
- Renesas:
- ravb: improve Rx performance 30-400% by using page pool,
theaded NAPI and timer-based IRQ coalescing
- ravb: add MII support for R-Car V4M
- Cadence (macb):
- macb: add ARP support to Wake-On-LAN
- Cortina:
- use phylib for RX and TX pause configuration
- Ethernet switches:
- nVidia/Mellanox:
- support configuration of multipath hash seed
- report more accurate max MTU
- use page_pool to improve Rx performance
- MediaTek:
- mt7530: add support for bridge port isolation
- Qualcomm:
- qca8k: add support for bridge port isolation
- Microchip:
- lan9371/2: add 100BaseTX PHY support
- NXP:
- vsc73xx: implement VLAN operations
- Ethernet PHYs:
- aquantia: enable support for aqr115c
- aquantia: add support for PHY LEDs
- realtek: add support for rtl8224 2.5Gbps PHY
- xpcs: add memory-mapped device support
- add BroadR-Reach link mode and support in Broadcom's PHY driver
- CAN:
- add document for ISO 15765-2 protocol support
- mcp251xfd: workaround for erratum DS80000789E, use timestamps to
catch when device returns incorrect FIFO status
- WiFi:
- mac80211/cfg80211:
- parse Transmit Power Envelope (TPE) data in mac80211 instead
of in drivers
- improvements for 6 GHz regulatory flexibility
- multi-link improvements
- support multiple radios per wiphy
- remove DEAUTH_NEED_MGD_TX_PREP flag
- Intel (iwlwifi):
- bump FW API to 91 for BZ/SC devices
- report 64-bit radiotap timestamp
- enable P2P low latency by default
- handle Transmit Power Envelope (TPE) advertised by AP
- remove support for older FW for new devices
- fast resume (keeping the device configured)
- mvm: re-enable Multi-Link Operation (MLO)
- aggregation (A-MSDU) optimizations
- MediaTek (mt76):
- mt7925 Multi-Link Operation (MLO) support
- Qualcomm (ath10k):
- LED support for various chipsets
- Qualcomm (ath12k):
- remove unsupported Tx monitor handling
- support channel 2 in 6 GHz band
- support Spatial Multiplexing Power Save (SMPS) in 6 GHz band
- supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID
Advertisements (EMA)
- support dynamic VLAN
- add panic handler for resetting the firmware state
- DebugFS support for datapath statistics
- WCN7850: support for Wake on WLAN
- Microchip (wilc1000):
- read MAC address during probe to make it visible to user space
- suspend/resume improvements
- TI (wl18xx):
- support newer firmware versions
- RealTek (rtw89):
- preparation for RTL8852BE-VT support
- Wake on WLAN support for WiFi 6 chips
- 36-bit PCI DMA support
- RealTek (rtlwifi):
- RTL8192DU support
- Broadcom (brcmfmac):
- Management Frame Protection support (to enable WPA3)
- Bluetooth:
- qualcomm: use the power sequencer for QCA6390
- btusb: mediatek: add ISO data transmission functions
- hci_bcm4377: add BCM4388 support
- btintel: add support for BlazarU core
- btintel: add support for Whale Peak2
- btnxpuart: add support for AW693 A1 chipset
- btnxpuart: add support for IW615 chipset
- btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591"
* tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits)
eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering"
tcp: Replace strncpy() with strscpy()
wifi: ath12k: fix build vs old compiler
tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child().
eth: fbnic: Write the TCAM tables used for RSS control and Rx to host
eth: fbnic: Add L2 address programming
eth: fbnic: Add basic Rx handling
eth: fbnic: Add basic Tx handling
eth: fbnic: Add link detection
eth: fbnic: Add initial messaging to notify FW of our presence
eth: fbnic: Implement Rx queue alloc/start/stop/free
eth: fbnic: Implement Tx queue alloc/start/stop/free
eth: fbnic: Allocate a netdevice and napi vectors with queues
eth: fbnic: Add FW communication mechanism
eth: fbnic: Add message parsing for FW messages
eth: fbnic: Add register init to set PCIe/Ethernet device config
eth: fbnic: Allocate core device specific structures and devlink interface
eth: fbnic: Add scaffolding for Meta's NIC driver
PCI: Add Meta Platforms vendor ID
net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK
...
|
||
|
Linus Torvalds
|
d80f2996b8 |
asm-generic updates for 6.11
Most of this is part of my ongoing work to clean up the system call tables. In this bit, all of the newer architectures are converted to use the machine readable syscall.tbl format instead in place of complex macros in include/uapi/asm-generic/unistd.h. This follows an earlier series that fixed various API mismatches and in turn is used as the base for planned simplifications. The other two patches are dead code removal and a warning fix. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmaVB1cACgkQYKtH/8kJ UicMqxAAnYKOxfjoMIhYYK6bl126wg/vIcDcjIR9cNWH21Nhn3qxn11ZXau3S7xv 3l/HreEhyEQr4gC2a70IlXyHUadYOlrk+83OURrunWk1oKPmZlMKcfPVbtp8GL7x PUNXQfwM1XZLveKwufY24hoZdwKC+Y/5WLc1t0ReznJuAqgeO2rM9W5dnV5bAfCp he3F5hFcr196Dz3/GJjJIWrY+cbwfmZWsNtj1vFTL5/r/LuCu8HTkqhsGj8tE5BJ NGVEEXbp5eaVTCIGqJWhnuZcsnKN9kM51M7CtdwWf8OTckUVuJap5OsDVKQkWkGl bLPbd2jhDltph0sah51hAIvv4WdkThW76u9FRW7KR3fo7ra67eF7l5j7wc1lE2JB GwLJ1X56Bxe1GhvvNTlDmb7DrnlP/DMPuRv3Z6xyH6l8iZ2pMGlnAxuw6Bs1s6Y5 WSs36ZpnS0ctgjfx37ZITsZSvbKFPpQFJP4siwS8aRNv/NFALNNdFyOCY5lNzspZ 0dxwjn6/7UpHE4MKh6/hvCg2QwupXXBTRytibw+75/rOsR+EYlmtuONtyq2sLUHe ktJ5pg+8XuZm27+wLffuluzmY7sv2F8OU4cTYeM60Ynmc6pRzwUY6/VhG52S1/mU Ua4VgYIpzOtlLrYmz5QTWIZpdSFSVbIc/3pLriD6hn4Mvg+BwdA= =XOhL -----END PGP SIGNATURE----- Merge tag 'asm-generic-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic updates from Arnd Bergmann: "Most of this is part of my ongoing work to clean up the system call tables. In this bit, all of the newer architectures are converted to use the machine readable syscall.tbl format instead in place of complex macros in include/uapi/asm-generic/unistd.h. This follows an earlier series that fixed various API mismatches and in turn is used as the base for planned simplifications. The other two patches are dead code removal and a warning fix" * tag 'asm-generic-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: vmlinux.lds.h: catch .bss..L* sections into BSS") fixmap: Remove unused set_fixmap_offset_io() riscv: convert to generic syscall table openrisc: convert to generic syscall table nios2: convert to generic syscall table loongarch: convert to generic syscall table hexagon: use new system call table csky: convert to generic syscall table arm64: rework compat syscall macros arm64: generate 64-bit syscall.tbl arm64: convert unistd_32.h to syscall.tbl format arc: convert to generic syscall table clone3: drop __ARCH_WANT_SYS_CLONE3 macro kbuild: add syscall table generation to scripts/Makefile.asm-headers kbuild: verify asm-generic header list loongarch: avoid generating extra header files um: don't generate asm/bpf_perf_event.h csky: drop asm/gpio.h wrapper syscalls: add generic scripts/syscall.tbl |
||
Paolo Bonzini
|
86014c1e20 |
KVM generic changes for 6.11
- Enable halt poll shrinking by default, as Intel found it to be a clear win.
- Setup empty IRQ routing when creating a VM to avoid having to synchronize
SRCU when creating a split IRQCHIP on x86.
- Rework the sched_in/out() paths to replace kvm_arch_sched_in() with a flag
that arch code can use for hooking both sched_in() and sched_out().
- Take the vCPU @id as an "unsigned long" instead of "u32" to avoid
truncating a bogus value from userspace, e.g. to help userspace detect bugs.
- Mark a vCPU as preempted if and only if it's scheduled out while in the
KVM_RUN loop, e.g. to avoid marking it preempted and thus writing guest
memory when retrieving guest state during live migration blackout.
- A few minor cleanups
-----BEGIN PGP SIGNATURE-----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=BalU
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-generic-6.11' of https://github.com/kvm-x86/linux into HEAD
KVM generic changes for 6.11
- Enable halt poll shrinking by default, as Intel found it to be a clear win.
- Setup empty IRQ routing when creating a VM to avoid having to synchronize
SRCU when creating a split IRQCHIP on x86.
- Rework the sched_in/out() paths to replace kvm_arch_sched_in() with a flag
that arch code can use for hooking both sched_in() and sched_out().
- Take the vCPU @id as an "unsigned long" instead of "u32" to avoid
truncating a bogus value from userspace, e.g. to help userspace detect bugs.
- Mark a vCPU as preempted if and only if it's scheduled out while in the
KVM_RUN loop, e.g. to avoid marking it preempted and thus writing guest
memory when retrieving guest state during live migration blackout.
- A few minor cleanups
|
||
Christophe Leroy
|
e6c0c03245 |
mm: provide mm_struct and address to huge_ptep_get()
On powerpc 8xx huge_ptep_get() will need to know whether the given ptep is a PTE entry or a PMD entry. This cannot be known with the PMD entry itself because there is no easy way to know it from the content of the entry. So huge_ptep_get() will need to know either the size of the page or get the pmd. In order to be consistent with huge_ptep_get_and_clear(), give mm and address to huge_ptep_get(). Link: https://lkml.kernel.org/r/cc00c70dd384298796a4e1b25d6c4eb306d3af85.1719928057.git.christophe.leroy@csgroup.eu Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Paolo Bonzini
|
c8b8b8190a |
LoongArch KVM changes for v6.11
1. Add ParaVirt steal time support. 2. Add some VM migration enhancement. 3. Add perf kvm-stat support for loongarch. -----BEGIN PGP SIGNATURE----- iQJKBAABCAA0FiEEzOlt8mkP+tbeiYy5AoYrw/LiJnoFAmaOS6UWHGNoZW5odWFj YWlAa2VybmVsLm9yZwAKCRAChivD8uImehejD/9pACGe3h3krXLcFVWXOFIu5Hpc 5kQLP0lSPJ/o5Xs8t/oPLrnDX70z90wXI1LOmltc7h32MSwFa2l8COQh+sN5eJBQ PNyt7u7bMipp0yJS4Gl3LQQ5vklcGOSpQc/gbeXnVx8J/tz+Mo9YGGLIXVRXRM6W Ri8D2VVFiwzQQYeTpPo1u1Ob8C6mA4KOppwvhscMTM3vj4NMbsinBzRnR0lG0Tdw meFhxDPly1Ksxsbnj9UGO6UnEY0A2SLONs6MiO4y4DtoqoDlw/lbqFJuYo4vvbx1 pxtjyirD/PX/wjslQFWUOuU0hMfAodera+JupZ5BZWfcG8FltA4DQfDsm/U9RjK/ 7gGNnr8Xk2/tp6+4AVV+HU2iTgRvq+mXCL72zSy2Y4r7ElBAANDfk4n+Zn/PWisn U9wwV8Ue7tVB15BRpRsg77NzBidiCFEe/6flWYiX2y24ke71gwDJBGUy8hMdKt6t 4Cq8atsU0MvDAzfYMsK9JjskJp4UFq6wb1tXbbuADM4TDhnzlK6s6h3vM+pFlh/f my7fDH8/2qsCWhBDM4pmsJskVp+I1GOk/80RjTQISwx7iHktJWvxNYTaisK2fvD5 Qs1IUWfNFbDX0Lr0QpN6j6X4rZkghR4R6XoFkd4nkicwi+UHVn3oK9GSqv24QJn9 7+Ev3dfRTUYLd6mC4Q== =DpIK -----END PGP SIGNATURE----- Merge tag 'loongarch-kvm-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD LoongArch KVM changes for v6.11 1. Add ParaVirt steal time support. 2. Add some VM migration enhancement. 3. Add perf kvm-stat support for loongarch. |
||
Jakub Kicinski
|
7c8267275d |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR. Conflicts: net/sched/act_ct.c |
||
Claudio Imbrenda
|
275d05ce06 |
s390/kvm: Move bitfields for dat tables
Move and improve the struct definitions for DAT tables from gaccess.c to a new header. Once in a separate header, the structs become available everywhere. One possible usecase is to merge them in the s390 pte_t and p?d_t definitions, which is left as an exercise for the reader. Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Nico Boehr <nrb@linux.ibm.com> Link: https://lore.kernel.org/r/20240703155900.103783-3-imbrenda@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
||
|
Claudio Imbrenda
|
723ac2d6ba |
s390/entry: Pass the asce as parameter to sie64a()
Pass the guest ASCE explicitly as parameter, instead of having sie64a() take it from lowcore. This removes hidden state from lowcore, and makes things look cleaner. Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Nico Boehr <nrb@linux.ibm.com> Link: https://lore.kernel.org/r/20240703155900.103783-2-imbrenda@linux.ibm.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
||
Mete Durlu
|
b7a5e5dfbd |
s390/sthyi: Use cached data when diag is busy
When sthyi is being emulated, data from diag204 is used. If diag204 returns busy, previously cached sthyi info block is returned to the caller and cache expiry is set to expired. Acked-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Tobias Huschle <huschle@linux.ibm.com> Signed-off-by: Tobias Huschle <huschle@linux.ibm.com> Signed-off-by: Mete Durlu <meted@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
||
|
Mete Durlu
|
6fdf72c9a9 |
s390/sthyi: Move diag operations
Move diag204 related operations to their own functions for better error handling and better readability. Acked-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Tobias Huschle <huschle@linux.ibm.com> Signed-off-by: Mete Durlu <meted@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
||
|
Mete Durlu
|
f449395421 |
s390/hypfs_diag: Diag204 busy loop
When diag204 busy-indiciation facility is installed and diag204 is returning busy, hypfs diag204 handler now does an interruptable busy wait until diag204 is no longer busy. If there is a signal pending, call would be restarted with -ERESTARTSYSCALL, except for fatal signals. Acked-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Tobias Huschle <huschle@linux.ibm.com> Signed-off-by: Mete Durlu <meted@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
||
|
Mete Durlu
|
97999f8c62 |
s390/diag: Add busy-indication-facility requirements
To verify if busy indication facility is installed or not sclp bits has to be checked. Add a function that checks sclp to improve readability. Add busy-indication-request bit mask for diag204 subcodes. Acked-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Tobias Huschle <huschle@linux.ibm.com> Signed-off-by: Mete Durlu <meted@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
||
|
Mete Durlu
|
df7e714d6d |
s390/diag: Diag204 add busy return errno
When diag204-busy-indication facility is installed, diag204 can return '8' which means device is busy and no operation is done. Add check for return codes of diag204 call. Return error codes according to diag204 return codes. Acked-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Tobias Huschle <huschle@linux.ibm.com> Signed-off-by: Mete Durlu <meted@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
||
|
Mete Durlu
|
bb9be93acb |
s390/diag: Return errno's from diag204
Return different errno's from diag204 to allow users to handle them accordingly. Instead of returning -1 regardless of the failing condition, return -EINVAL on invalid memory address and -EOPNOTSUPP when diag instruction fails. Acked-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Tobias Huschle <huschle@linux.ibm.com> Signed-off-by: Mete Durlu <meted@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
||
|
Mete Durlu
|
7455a33179 |
s390/sclp: Diag204 busy indication facility detection
Detect diag204 busy indication facility. Acked-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Tobias Huschle <huschle@linux.ibm.com> Signed-off-by: Mete Durlu <meted@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
||
|
Heiko Carstens
|
279a0164e0 |
s390/atomic_ops: Make use of flag output constraint
With gcc 14.1.0 support for flag output constraint was added for s390. Use this for __atomic_cmpxchg_bool(). This allows for slightly better code, since the compiler can generate code depending on the condition code which is the result of an inline assembly. The size of the kernel image is reduced by ~12kb. Reviewed-by: Juergen Christ <jchrist@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
||
|
Heiko Carstens
|
ee19370c92 |
s390/atomic_ops: Improve __atomic_set() for small values
Use mvhi/mvghi for small constant values within the __atomic_set() inline assemblies. This avoids loading the specified value into a register. The size of the kernel image is reduced by ~1.2kb. Reviewed-by: Juergen Christ <jchrist@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
||
|
Heiko Carstens
|
f2ed8367bf |
s390/atomic_ops: Use symbolic names
Consistently use symbolic names in all atomic ops inline assemblies. Reviewed-by: Juergen Christ <jchrist@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
||
Sven Schnelle
|
4a39f12e75 |
s390/smp: Switch to GENERIC_CPU_DEVICES
Instead of setting up non-boot CPUs early in architecture code, only setup the cpu present mask and let the generic code handle cpu bringup. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
||
Arnd Bergmann
|
505d66d1ab |
clone3: drop __ARCH_WANT_SYS_CLONE3 macro
When clone3() was introduced, it was not obvious how each architecture deals with setting up the stack and keeping the register contents in a fork()-like system call, so this was left for the architecture maintainers to implement, with __ARCH_WANT_SYS_CLONE3 defined by those that already implement it. Five years later, we still have a few architectures left that are missing clone3(), and the macro keeps getting in the way as it's fundamentally different from all the other __ARCH_WANT_SYS_* macros that are meant to provide backwards-compatibility with applications using older syscalls that are no longer provided by default. Address this by reversing the polarity of the macro, adding an __ARCH_BROKEN_SYS_CLONE3 macro to all architectures that don't already provide the syscall, and remove __ARCH_WANT_SYS_CLONE3 from all the other ones. Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
Paolo Abeni
|
7b769adc26 |
bpf-next-for-netdev
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZoxN0AAKCRDbK58LschI g0c5AQDa3ZV9gfbN42y1zSDoM1uOgO60fb+ydxyOYh8l3+OiQQD/fLfpTY3gBFSY 9yi/pZhw/QdNzQskHNIBrHFGtJbMxgs= =p1Zz -----END PGP SIGNATURE----- Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Daniel Borkmann says: ==================== pull-request: bpf-next 2024-07-08 The following pull-request contains BPF updates for your *net-next* tree. We've added 102 non-merge commits during the last 28 day(s) which contain a total of 127 files changed, 4606 insertions(+), 980 deletions(-). The main changes are: 1) Support resilient split BTF which cuts down on duplication and makes BTF as compact as possible wrt BTF from modules, from Alan Maguire & Eduard Zingerman. 2) Add support for dumping kfunc prototypes from BTF which enables both detecting as well as dumping compilable prototypes for kfuncs, from Daniel Xu. 3) Batch of s390x BPF JIT improvements to add support for BPF arena and to implement support for BPF exceptions, from Ilya Leoshkevich. 4) Batch of riscv64 BPF JIT improvements in particular to add 12-argument support for BPF trampolines and to utilize bpf_prog_pack for the latter, from Pu Lehui. 5) Extend BPF test infrastructure to add a CHECKSUM_COMPLETE validation option for skbs and add coverage along with it, from Vadim Fedorenko. 6) Inline bpf_get_current_task/_btf() helpers in the arm64 BPF JIT which gives a small 1% performance improvement in micro-benchmarks, from Puranjay Mohan. 7) Extend the BPF verifier to track the delta between linked registers in order to better deal with recent LLVM code optimizations, from Alexei Starovoitov. 8) Fix bpf_wq_set_callback_impl() kfunc signature where the third argument should have been a pointer to the map value, from Benjamin Tissoires. 9) Extend BPF selftests to add regular expression support for test output matching and adjust some of the selftest when compiled under gcc, from Cupertino Miranda. 10) Simplify task_file_seq_get_next() and remove an unnecessary loop which always iterates exactly once anyway, from Dan Carpenter. 11) Add the capability to offload the netfilter flowtable in XDP layer through kfuncs, from Florian Westphal & Lorenzo Bianconi. 12) Various cleanups in networking helpers in BPF selftests to shave off a few lines of open-coded functions on client/server handling, from Geliang Tang. 13) Properly propagate prog->aux->tail_call_reachable out of BPF verifier, so that x86 JIT does not need to implement detection, from Leon Hwang. 14) Fix BPF verifier to add a missing check_func_arg_reg_off() to prevent an out-of-bounds memory access for dynpointers, from Matt Bobrowski. 15) Fix bpf_session_cookie() kfunc to return __u64 instead of long pointer as it might lead to problems on 32-bit archs, from Jiri Olsa. 16) Enhance traffic validation and dynamic batch size support in xsk selftests, from Tushar Vyavahare. bpf-next-for-netdev * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (102 commits) selftests/bpf: DENYLIST.aarch64: Remove fexit_sleep selftests/bpf: amend for wrong bpf_wq_set_callback_impl signature bpf: helpers: fix bpf_wq_set_callback_impl signature libbpf: Add NULL checks to bpf_object__{prev_map,next_map} selftests/bpf: Remove exceptions tests from DENYLIST.s390x s390/bpf: Implement exceptions s390/bpf: Change seen_reg to a mask bpf: Remove unnecessary loop in task_file_seq_get_next() riscv, bpf: Optimize stack usage of trampoline bpf, devmap: Add .map_alloc_check selftests/bpf: Remove arena tests from DENYLIST.s390x selftests/bpf: Add UAF tests for arena atomics selftests/bpf: Introduce __arena_global s390/bpf: Support arena atomics s390/bpf: Enable arena s390/bpf: Support address space cast instruction s390/bpf: Support BPF_PROBE_MEM32 s390/bpf: Land on the next JITed instruction after exception s390/bpf: Introduce pre- and post- probe functions s390/bpf: Get rid of get_probe_mem_regno() ... ==================== Link: https://patch.msgid.link/20240708221438.10974-1-daniel@iogearbox.net Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Heiko Carstens
|
b5efb63acf |
s390/mm: Add NULL pointer check to crst_table_free() base_crst_free()
crst_table_free() used to work with NULL pointers before the conversion
to ptdescs. Since crst_table_free() can be called with a NULL pointer
(error handling in crst_table_upgrade() add an explicit check.
Also add the same check to base_crst_free() for consistency reasons.
In real life this should not happen, since order two GFP_KERNEL
allocations will not fail, unless FAIL_PAGE_ALLOC is enabled and used.
Reported-by: Yunseong Kim <yskelg@gmail.com>
Fixes:
|
||
Ilya Leoshkevich
|
fa7bd4b000 |
s390/bpf: Implement exceptions
Implement the following three pieces required from the JIT: - A "top-level" BPF prog (exception_boundary) must save all non-volatile registers, and not only the ones that it clobbers. - A "handler" BPF prog (exception_cb) must switch stack to that of exception_boundary, and restore the registers that exception_boundary saved. - arch_bpf_stack_walk() must unwind the stack and provide the results in a way that satisfies both bpf_throw() and exception_cb. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20240703005047.40915-3-iii@linux.ibm.com |
||
|
Ilya Leoshkevich
|
7ba4f43e16 |
s390/bpf: Change seen_reg to a mask
Using a mask instead of an array saves a small amount of memory and allows marking multiple registers as seen with a simple "or". Another positive side-effect is that it speeds up verification with jitterbug. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20240703005047.40915-2-iii@linux.ibm.com |
||
|
Linus Torvalds
|
75aa87ca48 |
s390: fix support for z16 systems.
-----BEGIN PGP SIGNATURE----- iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmaHstsUHHBib256aW5p QHJlZGhhdC5jb20ACgkQv/vSX3jHroPg2Qf+IUHv0lUOiPtbanMpwAWuXVLUFUOs QxhzcKKmi/Det9gkgYA6SQEtr0nR22FIE50+lRFex9gCLeaFIizVCKtvm9vi5pKe IpJ3sNAO88O/ehxurdBJ4ueADybruXyyKeQfpPKBoPiUAJpr85BYIpRbXwTyJTok eCFQS39jvTN2YMyGrD7zdKBOcf3V3Da/m1v4f5bAx8nRYQNPLFX1GFbJG8gzQ8wN DnYlDiKBzu8BOnBkdQh53Oz2e6a5gU3EHo9ZGITOr6Fmu4tGuXBkZ50pwaIdXD52 ZSZdMfbYJr7cWg2H6z3rqfIgO32uCGzHX7ZR8s3JbckVvQyaO4zL14ZW7w== =szz2 -----END PGP SIGNATURE----- Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm Pull kvm fix from Paolo Bonzini: - s390: fix support for z16 systems * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: s390: fix LPSWEY handling |
||
|
Paolo Bonzini
|
8ad209fc64 |
KVM: s390: Fix z16 support
The z16 support might fail with the lpswey instruction. Provide a handler. -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+SKTgaM0CPnbq/vKEXu8gLWmHHwFAmaGXwoACgkQEXu8gLWm HHwLxQ/8CRfHozlka2OzT/aYNVWlo2+bSFBnLeCKr1gqN0zvKrkl9YMCgrk9D5Qc JOMVEGFvfFduDdkK4Jyi9WCRlph837BOEknQQpwB4T684eHagPWrLyRao4vWkqjT lpdJ+HdzPhtbStOho0/V1SzgcASYNODTDcBCJ2y2PngzGY4m8GmsYhVVGCFtFcco U+KfgXN1QA5AyGMgPYsJGQjvCAr43EPL9wpQNqaykYLOMj0X71NZQxoqWKw2SFB2 MazKo7zzWiP7BlpY4Ed3LfRpzcNzVNc17OIbmItSTOaDrh1GHiSTjAj/iP6N321/ ggwIg9McLo63WFB8lVKnQcE/i6qCSFZ9xqxRUWBMD28ksuCBuecwqeSlP7IllTpY Y6QHgQiDjqhlPDC2Ts5ikJVbmDX8ljfQ87P+YnePY9G0TIqFf3+2iBNqCML0nzYp 8xn/3osotzO3D18scxueiTm0HGXrQVJ5wqxSApOu7gxG6gwmFJSpAVvM9My3YRPx Mrc+zRqoSrpKFOD9aAuzOIiBSI/jslG7fNeFRcpIiKTNPcy1Jlyw9RKN+ePku3n/ 4rZKOAiEhoavIXQ/SBwXX0BsaXo8oONRNBaAJ0iqGLAnNOTa6lwpVeBSgfzKYi5q H0vUcyeKNfsuX1S+6o7+y3zjV6kZ3OAsW1ojCSZXdyoQvfjGQ5s= =di1S -----END PGP SIGNATURE----- Merge tag 'kvm-s390-master-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390: Fix z16 support The z16 support might fail with the lpswey instruction. Provide a handler. |
||
|
Linus Torvalds
|
d470e9f57d |
s390 fixes for 6.10-rc7
- Fix and add physical to virtual address translations in dasd and virtio_ccw drivers. For virtio_ccw this is just a minimal fix. More code cleanup will follow. - Small defconfig updates -----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEECMNfWEw3SLnmiLkZIg7DeRspbsIFAmaGrwoACgkQIg7DeRsp bsI6VxAAlGcZEERzkbDNyEOpuEsTb6pgGQ4EvJKsBlDS53d6kO4FLPZGxAiL7mJi GgtZg7ydABRU55ZPRRbJ2g5vtHAN8PqFsFzgxxIsCPWZUDj/wyRL5y+4lz4/q8ZJ AXy/Tk4Ck9qvZF1nPqdxLBPONeDqv7bgEIPiFYhPlq+HesAl+DKsd0oYg7Ur9Sk4 IMvsr0Rc063h7sZAwL8VgwsZxeA8UF5g+OKuoa6huPlu0gvIADlTUa1rUuKn8s5b o39zoRMSGUZ1wpLWQasnHf4qYY4xhbBv5Uw8HWxoGXsw6DXXkKrcd9VhdSJY7P+E CYV0N5EwFYsQjGH07XOWbks9pAyFVpyz8sMlzhlHBQziFa6kyRxkAVHabGNNXJKj XtMb5MjjngGa4qhZ4SuHBuT9bzO4IGn2qW8aigEvhX5ti6hZMw4ypLt78Y2WqbXJ yZD37Cj8aUDw2EVbNHDBSwPjTaAsOFYtIVstbWD4tvR/JeBI5wESGQQJmkDFRrVI HIE21dCgDiQ+uT7EmnhJux3OWniKIlMDV/Ibcw91nc0ICENdsYa5N0uOoqx1goMR Ob3n+D5GReUESfmBOazC8SxDfMOMWJj9zOEavcxZSbF3k6Giw9PYo0xl2LUx4nCK qrc8s4I7rPcNoBJGzkhF3YNqd8u5rHuta3BpEWkNfnw9fmOVdO8= =A26e -----END PGP SIGNATURE----- Merge tag 's390-6.10-8' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Heiko Carstens: - Fix and add physical to virtual address translations in dasd and virtio_ccw drivers. For virtio_ccw this is just a minimal fix. More code cleanup will follow. - Small defconfig updates * tag 's390-6.10-8' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/dasd: Fix invalid dereferencing of indirect CCW data pointer s390/vfio_ccw: Fix target addresses of TIC CCWs s390: Update defconfigs |
||
Christoph Schlameuss
|
7816e58967 |
kvm: s390: Reject memory region operations for ucontrol VMs
This change rejects the KVM_SET_USER_MEMORY_REGION and
KVM_SET_USER_MEMORY_REGION2 ioctls when called on a ucontrol VM.
This is necessary since ucontrol VMs have kvm->arch.gmap set to 0 and
would thus result in a null pointer dereference further in.
Memory management needs to be performed in userspace and using the
ioctls KVM_S390_UCAS_MAP and KVM_S390_UCAS_UNMAP.
Also improve s390 specific documentation for KVM_SET_USER_MEMORY_REGION
and KVM_SET_USER_MEMORY_REGION2.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Fixes:
|
||
Eric Farman
|
33a729a177 |
KVM: s390: vsie: retry SIE instruction on host intercepts
It's possible that SIE exits for work that the host needs to perform rather than something that is intended for the guest. A Linux guest will ignore this intercept code since there is nothing for it to do, but a more robust solution would rewind the PSW back to the SIE instruction. This will transparently resume the guest once the host completes its work, without the guest needing to process what is effectively a NOP and re-issue SIE itself. Signed-off-by: Eric Farman <farman@linux.ibm.com> Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com> Link: https://lore.kernel.org/r/20240301204342.3217540-1-farman@linux.ibm.com Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Message-ID: <20240301204342.3217540-1-farman@linux.ibm.com> |
||
|
Ilya Leoshkevich
|
3a8f6f3b46 |
kmsan: enable on s390
Now that everything else is in place, enable KMSAN in Kconfig. Link: https://lkml.kernel.org/r/20240621113706.315500-39-iii@linux.ibm.com Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: <kasan-dev@googlegroups.com> Cc: Marco Elver <elver@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Ilya Leoshkevich
|
2a48c8c9cf |
s390/kmsan: implement the architecture-specific functions
arch_kmsan_get_meta_or_null() finds the lowcore shadow by querying the prefix and calling kmsan_get_metadata() again. kmsan_virt_addr_valid() delegates to virt_addr_valid(). Link: https://lkml.kernel.org/r/20240621113706.315500-38-iii@linux.ibm.com Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: <kasan-dev@googlegroups.com> Cc: Marco Elver <elver@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Ilya Leoshkevich
|
7e17eac28a |
s390/unwind: disable KMSAN checks
The unwind code can read uninitialized frames. Furthermore, even in the good case, KMSAN does not emit shadow for backchains. Therefore disable it for the unwinding functions. Link: https://lkml.kernel.org/r/20240621113706.315500-37-iii@linux.ibm.com Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Alexander Potapenko <glider@google.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: <kasan-dev@googlegroups.com> Cc: Marco Elver <elver@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Ilya Leoshkevich
|
e0bebfd63a |
s390/uaccess: add the missing linux/instrumented.h #include
uaccess.h uses instrument_get_user() and instrument_put_user(), which are defined in linux/instrumented.h. Currently we get this header from somewhere else by accident; prefer to be explicit about it and include it directly. Link: https://lkml.kernel.org/r/20240621113706.315500-36-iii@linux.ibm.com Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Suggested-by: Alexander Potapenko <glider@google.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: <kasan-dev@googlegroups.com> Cc: Marco Elver <elver@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Ilya Leoshkevich
|
eb6efdfeae |
s390/uaccess: add KMSAN support to put_user() and get_user()
put_user() uses inline assembly with precise constraints, so Clang is in
principle capable of instrumenting it automatically. Unfortunately, one
of the constraints contains a dereferenced user pointer, and Clang does
not currently distinguish user and kernel pointers. Therefore KMSAN
attempts to access shadow for user pointers, which is not a right thing to
do.
An obvious fix to add __no_sanitize_memory to __put_user_fn() does not
work, since it's __always_inline. And __always_inline cannot be removed
due to the __put_user_bad() trick.
A different obvious fix of using the "a" instead of the "+Q" constraint
degrades the code quality, which is very important here, since it's a hot
path.
Instead, repurpose the __put_user_asm() macro to define
__put_user_{char,short,int,long}_noinstr() functions and mark them with
__no_sanitize_memory. For the non-KMSAN builds make them __always_inline
in order to keep the generated code quality. Also define
__put_user_{char,short,int,long}() functions, which call the
aforementioned ones and which *are* instrumented, because they call KMSAN
hooks, which may be implemented as macros.
The same applies to get_user() as well.
Link: https://lkml.kernel.org/r/20240621113706.315500-35-iii@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <kasan-dev@googlegroups.com>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
|
Ilya Leoshkevich
|
c1057a707a |
s390/traps: unpoison the kernel_stack_overflow()'s pt_regs
This is normally done by the generic entry code, but the kernel_stack_overflow() flow bypasses it. Link: https://lkml.kernel.org/r/20240621113706.315500-34-iii@linux.ibm.com Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Alexander Potapenko <glider@google.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: <kasan-dev@googlegroups.com> Cc: Marco Elver <elver@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Ilya Leoshkevich
|
05a6dde667 |
s390/string: add KMSAN support
Add KMSAN support for the s390 implementations of the string functions.
Do this similar to how it's already done for KASAN, except that the
optimized memset{16,32,64}() functions need to be disabled: it's important
for KMSAN to know that they initialized something.
The way boot code is built with regard to string functions is problematic,
since most files think it's configured with sanitizers, but boot/string.c
doesn't. This creates various problems with the memset64() definitions,
depending on whether the code is built with sanitizers or fortify. This
should probably be streamlined, but in the meantime resolve the issues by
introducing the IN_BOOT_STRING_C macro, similar to the existing
IN_ARCH_STRING_C macro.
Link: https://lkml.kernel.org/r/20240621113706.315500-33-iii@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <kasan-dev@googlegroups.com>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
|
Ilya Leoshkevich
|
65ca73f9fb |
s390/mm: define KMSAN metadata for vmalloc and modules
The pages for the KMSAN metadata associated with most kernel mappings are taken from memblock by the common code. However, vmalloc and module metadata needs to be defined by the architectures. Be a little bit more careful than x86: allocate exactly MODULES_LEN for the module shadow and origins, and then take 2/3 of vmalloc for the vmalloc shadow and origins. This ensures that users passing small vmalloc= values on the command line do not cause module metadata collisions. Link: https://lkml.kernel.org/r/20240621113706.315500-32-iii@linux.ibm.com Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Alexander Potapenko <glider@google.com> Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: <kasan-dev@googlegroups.com> Cc: Marco Elver <elver@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Ilya Leoshkevich
|
1b301f5f28 |
s390/irqflags: do not instrument arch_local_irq_*() with KMSAN
Lockdep generates the following false positives with KMSAN on s390x: [ 6.063666] DEBUG_LOCKS_WARN_ON(lockdep_hardirqs_enabled()) [ ...] [ 6.577050] Call Trace: [ 6.619637] [<000000000690d2de>] check_flags+0x1fe/0x210 [ 6.665411] ([<000000000690d2da>] check_flags+0x1fa/0x210) [ 6.707478] [<00000000006cec1a>] lock_acquire+0x2ca/0xce0 [ 6.749959] [<00000000069820ea>] _raw_spin_lock_irqsave+0xea/0x190 [ 6.794912] [<00000000041fc988>] __stack_depot_save+0x218/0x5b0 [ 6.838420] [<000000000197affe>] __msan_poison_alloca+0xfe/0x1a0 [ 6.882985] [<0000000007c5827c>] start_kernel+0x70c/0xd50 [ 6.927454] [<0000000000100036>] startup_continue+0x36/0x40 Between trace_hardirqs_on() and `stosm __mask, 3` lockdep thinks that interrupts are on, but on the CPU they are still off. KMSAN instrumentation takes spinlocks, giving lockdep a chance to see and complain about this discrepancy. KMSAN instrumentation is inserted in order to poison the __mask variable. Disable instrumentation in the respective functions. They are very small and it's easy to see that no important metadata updates are lost because of this. Link: https://lkml.kernel.org/r/20240621113706.315500-31-iii@linux.ibm.com Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: <kasan-dev@googlegroups.com> Cc: Marco Elver <elver@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Ilya Leoshkevich
|
0cfd60a6a1 |
s390/ftrace: unpoison ftrace_regs in kprobe_ftrace_handler()
s390 uses assembly code to initialize ftrace_regs and call kprobe_ftrace_handler(). Therefore, from the KMSAN's point of view, ftrace_regs is poisoned on kprobe_ftrace_handler() entry. This causes KMSAN warnings when running the ftrace testsuite. Fix by trusting the assembly code and always unpoisoning ftrace_regs in kprobe_ftrace_handler(). Link: https://lkml.kernel.org/r/20240621113706.315500-30-iii@linux.ibm.com Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Alexander Potapenko <glider@google.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: <kasan-dev@googlegroups.com> Cc: Marco Elver <elver@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Ilya Leoshkevich
|
1f4cf63979 |
s390/diag: unpoison diag224() output buffer
Diagnose 224 stores 4k bytes, which currently cannot be deduced from the inline assembly constraints. This leads to KMSAN false positives. Fix the constraints by using a 4k-sized struct instead of a raw pointer. While at it, prettify them too. Link: https://lkml.kernel.org/r/20240621113706.315500-29-iii@linux.ibm.com Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Suggested-by: Heiko Carstens <hca@linux.ibm.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: <kasan-dev@googlegroups.com> Cc: Marco Elver <elver@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Ilya Leoshkevich
|
81b6bde8ba |
s390/cpumf: unpoison STCCTM output buffer
stcctm() uses the "Q" constraint for dest, therefore KMSAN does not understand that it fills multiple doublewords pointed to by dest, not just one. This results in false positives. Unpoison the whole dest manually with kmsan_unpoison_memory(). Link: https://lkml.kernel.org/r/20240621113706.315500-28-iii@linux.ibm.com Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Reported-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Alexander Potapenko <glider@google.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: <kasan-dev@googlegroups.com> Cc: Marco Elver <elver@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Ilya Leoshkevich
|
8c208bc5b2 |
s390/cpacf: unpoison the results of cpacf_trng()
Prevent KMSAN from complaining about buffers filled by cpacf_trng() being uninitialized. Link: https://lkml.kernel.org/r/20240621113706.315500-27-iii@linux.ibm.com Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Tested-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Alexander Potapenko <glider@google.com> Acked-by: Heiko Carstens <hca@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@linux.ibm.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: <kasan-dev@googlegroups.com> Cc: Marco Elver <elver@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |