Commit Graph

675 Commits

Author SHA1 Message Date
Linus Torvalds
6cbcc7ab21 SCSI misc on 20211112
This series is all the stragglers that didn't quite make the first
 merge window pull.  It's mostly minor updates and bug fixes of merge
 window code but it also has two driver updates: ufs and qla2xxx.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYY5mOyYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishXpjAQDboVkH
 7RQblJf8AKDMjN2baSIrmbk7qEUqzRgo6Ef3egEAi044Gx4KqBwzBLiCREcFW/Mt
 F95pt5udsLypGhpfZlE=
 =fiv8
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull more SCSI updates from James Bottomley:
 "This series is all the stragglers that didn't quite make the first
  merge window pull. It's mostly minor updates and bug fixes of merge
  window code but it also has two driver updates: ufs and qla2xxx"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (46 commits)
  scsi: scsi_debug: Don't call kcalloc() if size arg is zero
  scsi: core: Remove command size deduction from scsi_setup_scsi_cmnd()
  scsi: scsi_ioctl: Validate command size
  scsi: ufs: ufshpb: Properly handle max-single-cmd
  scsi: core: Avoid leaving shost->last_reset with stale value if EH does not run
  scsi: bsg: Fix errno when scsi_bsg_register_queue() fails
  scsi: sr: Remove duplicate assignment
  scsi: ufs: ufs-exynos: Introduce ExynosAuto v9 virtual host
  scsi: ufs: ufs-exynos: Multi-host configuration for ExynosAuto v9
  scsi: ufs: ufs-exynos: Support ExynosAuto v9 UFS
  scsi: ufs: ufs-exynos: Add pre/post_hce_enable drv callbacks
  scsi: ufs: ufs-exynos: Factor out priv data init
  scsi: ufs: ufs-exynos: Add EXYNOS_UFS_OPT_SKIP_CONFIG_PHY_ATTR option
  scsi: ufs: ufs-exynos: Support custom version of ufs_hba_variant_ops
  scsi: ufs: ufs-exynos: Add setup_clocks callback
  scsi: ufs: ufs-exynos: Add refclkout_stop control
  scsi: ufs: ufs-exynos: Simplify drv_data retrieval
  scsi: ufs: ufs-exynos: Change pclk available max value
  scsi: ufs: Add quirk to enable host controller without PH configuration
  scsi: ufs: Add quirk to handle broken UIC command
  ...
2021-11-12 12:25:50 -08:00
Linus Torvalds
3e28850cbd for-5.16/block-2021-11-09
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmGKqAcQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpojrD/4yA+GgV+jWeIepYWvU81TQFpt9AJmzWbrY
 uryj4dy7EdMjun+JkAP8k4qreqvTZRsJMkr9dhmS4qaM8/Vt8K/RU/0n/lxNVmqc
 1//ZaTS6DURVAc52GHIXD3q4cv8pHofTZZlrj1Hgz35shlOayStGJtktH5f8uQl4
 5Yxjh+HKr15Chym+fKlbR6T7BgVxxNyhT9q89BgUwMAJX+1KRVtwtkyVK5IbObFy
 zOeiC+n9niQ6iJHcLoqb7LjfBOs/VjdNOQYGSCAnrBxuQ8GnEP2xDw2nvFlOPE12
 5tWEwTgAX7381ilbL6VvNTlTafIs/Axt8mI0cY/OMW7ApiHwO3rXjQSqA4yrnKCJ
 h6M1QavqThd2DtMnOi0U5wwgtD2UjS+CMpK5XFxeIyl6GqTgZcaWm3VqRnG68KZD
 r5+o99GKWCHy0cckxq2WiWJouReeNZ9u9R6HNDw0Vb8UNyWgBR+v2MkX+SHS/c85
 2gXm10hwBH7BFnC4X8ceiuT/bm7xm9S6D/3LCVitlUTBRfqobsQEQjSciPeoOtL0
 rRSTKob7jtokiB2q01wx3q1jnUMpxE1fqJkpLjUvebTzw+a+xfPwy0nNTGq0XXIv
 WMVRRpSWCZm04Ru0q/K8cj0GOyur5x+ilefZ1V+/sRU5dVmGuJgbJUxei1HPC6eV
 z9Rn0aFv4g==
 =1GPi
 -----END PGP SIGNATURE-----

Merge tag 'for-5.16/block-2021-11-09' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:

 - Set of fixes for the batched tag allocation (Ming, me)

 - add_disk() error handling fix (Luis)

 - Nested queue quiesce fixes (Ming)

 - Shared tags init error handling fix (Ye)

 - Misc cleanups (Jean, Ming, me)

* tag 'for-5.16/block-2021-11-09' of git://git.kernel.dk/linux-block:
  nvme: wait until quiesce is done
  scsi: make sure that request queue queiesce and unquiesce balanced
  scsi: avoid to quiesce sdev->request_queue two times
  blk-mq: add one API for waiting until quiesce is done
  blk-mq: don't free tags if the tag_set is used by other device in queue initialztion
  block: fix device_add_disk() kobject_create_and_add() error handling
  block: ensure cached plug request matches the current queue
  block: move queue enter logic into blk_mq_submit_bio()
  block: make bio_queue_enter() fast-path available inline
  block: split request allocation components into helpers
  block: have plug stored requests hold references to the queue
  blk-mq: update hctx->nr_active in blk_mq_end_request_batch()
  blk-mq: add RQF_ELV debug entry
  blk-mq: only try to run plug merge if request has same queue with incoming bio
  block: move RQF_ELV setting into allocators
  dm: don't stop request queue after the dm device is suspended
  block: replace always false argument with 'false'
  block: assign correct tag before doing prefetch of request
  blk-mq: fix redundant check of !e expression
2021-11-09 11:20:07 -08:00
Ming Lei
93542fbfa7 scsi: make sure that request queue queiesce and unquiesce balanced
For fixing queue quiesce race between driver and block layer(elevator
switch, update nr_requests, ...), we need to support concurrent quiesce
and unquiesce, which requires the two call balanced.

It isn't easy to audit that in all scsi drivers, especially the two may
be called from different contexts, so do it in scsi core with one
per-device atomic variable to balance quiesce and unquiesce.

Reported-by: Yi Zhang <yi.zhang@redhat.com>
Fixes: e70feb8b3e ("blk-mq: support concurrent queue quiesce/unquiesce")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20211109071144.181581-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-09 08:14:27 -07:00
Ming Lei
d2b9f12b0f scsi: avoid to quiesce sdev->request_queue two times
For fixing queue quiesce race between driver and block layer(elevator
switch, update nr_requests, ...), we need to support concurrent quiesce
and unquiesce, which requires the two to be balanced.

blk_mq_quiesce_queue() calls blk_mq_quiesce_queue_nowait() for updating
quiesce depth and marking the flag, then scsi_internal_device_block() calls
blk_mq_quiesce_queue_nowait() two times actually.

Fix the double quiesce and keep quiesce and unquiesce balanced.

Reported-by: Yi Zhang <yi.zhang@redhat.com>
Fixes: e70feb8b3e ("blk-mq: support concurrent queue quiesce/unquiesce")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20211109071144.181581-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-11-09 08:14:27 -07:00
Linus Torvalds
fe91c4725a SCSI misc on 20211105
This series consists of the usual driver updates (ufs, smartpqi, lpfc,
 target, megaraid_sas, hisi_sas, qla2xxx) and minor updates and bug
 fixes.  Notable core changes are the removal of scsi->tag which caused
 some churn in obsolete drivers and a sweep through all drivers to call
 scsi_done() directly instead of scsi->done() which removes a pointer
 indirection from the hot path and a move to register core sysfs files
 earlier, which means they're available to KOBJ_ADD processing, which
 necessitates switching all drivers to using attribute groups.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYYUfBCYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbUJAQDZt4oc
 vUx9JpyrdHxxTCuOzVFd8W1oJn0k5ltCBuz4yAD8DNbGhGm93raMSJ3FOOlzLEbP
 RG8vBdpxMudlvxAPi/A=
 =BSFz
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This consists of the usual driver updates (ufs, smartpqi, lpfc,
  target, megaraid_sas, hisi_sas, qla2xxx) and minor updates and bug
  fixes.

  Notable core changes are the removal of scsi->tag which caused some
  churn in obsolete drivers and a sweep through all drivers to call
  scsi_done() directly instead of scsi->done() which removes a pointer
  indirection from the hot path and a move to register core sysfs files
  earlier, which means they're available to KOBJ_ADD processing, which
  necessitates switching all drivers to using attribute groups"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (279 commits)
  scsi: lpfc: Update lpfc version to 14.0.0.3
  scsi: lpfc: Allow fabric node recovery if recovery is in progress before devloss
  scsi: lpfc: Fix link down processing to address NULL pointer dereference
  scsi: lpfc: Allow PLOGI retry if previous PLOGI was aborted
  scsi: lpfc: Fix use-after-free in lpfc_unreg_rpi() routine
  scsi: lpfc: Correct sysfs reporting of loop support after SFP status change
  scsi: lpfc: Wait for successful restart of SLI3 adapter during host sg_reset
  scsi: lpfc: Revert LOG_TRACE_EVENT back to LOG_INIT prior to driver_resource_setup()
  scsi: ufs: ufshcd-pltfrm: Fix memory leak due to probe defer
  scsi: ufs: mediatek: Avoid sched_clock() misuse
  scsi: mpt3sas: Make mpt3sas_dev_attrs static
  scsi: scsi_transport_sas: Add 22.5 Gbps link rate definitions
  scsi: target: core: Stop using bdevname()
  scsi: aha1542: Use memcpy_{from,to}_bvec()
  scsi: sr: Add error handling support for add_disk()
  scsi: sd: Add error handling support for add_disk()
  scsi: target: Perform ALUA group changes in one step
  scsi: target: Replace lun_tg_pt_gp_lock with rcu in I/O path
  scsi: target: Fix alua_tg_pt_gps_count tracking
  scsi: target: Fix ordered tag handling
  ...
2021-11-05 08:42:02 -07:00
Tadeusz Struk
703535e6ae scsi: core: Remove command size deduction from scsi_setup_scsi_cmnd()
No need to deduce command size in scsi_setup_scsi_cmnd() anymore as
appropriate checks have been added to scsi_fill_sghdr_rq() function and the
cmd_len should never be zero here.  The code to do that wasn't correct
anyway, as it used uninitialized cmd->cmnd, which caused a null-ptr-deref
if the command size was zero as in the trace below. Fix this by removing
the unneeded code.

KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 0 PID: 1822 Comm: repro Not tainted 5.15.0 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-4.fc34 04/01/2014
Call Trace:
 blk_mq_dispatch_rq_list+0x7c7/0x12d0
 __blk_mq_sched_dispatch_requests+0x244/0x380
 blk_mq_sched_dispatch_requests+0xf0/0x160
 __blk_mq_run_hw_queue+0xe8/0x160
 __blk_mq_delay_run_hw_queue+0x252/0x5d0
 blk_mq_run_hw_queue+0x1dd/0x3b0
 blk_mq_sched_insert_request+0x1ff/0x3e0
 blk_execute_rq_nowait+0x173/0x1e0
 blk_execute_rq+0x15c/0x540
 sg_io+0x97c/0x1370
 scsi_ioctl+0xe16/0x28e0
 sd_ioctl+0x134/0x170
 blkdev_ioctl+0x362/0x6e0
 block_ioctl+0xb0/0xf0
 vfs_ioctl+0xa7/0xf0
 do_syscall_64+0x3d/0xb0
 entry_SYSCALL_64_after_hwframe+0x44/0xae
---[ end trace 8b086e334adef6d2 ]---
Kernel panic - not syncing: Fatal exception

Link: https://lore.kernel.org/r/20211103170659.22151-2-tadeusz.struk@linaro.org
Fixes: 2ceda20f0a ("scsi: core: Move command size detection out of the fast path")
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: James E.J. Bottomley <jejb@linux.ibm.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: <linux-scsi@vger.kernel.org>
Cc: <linux-kernel@vger.kernel.org>
Cc: <stable@vger.kernel.org> # 5.15, 5.14, 5.10
Reported-by: syzbot+5516b30f5401d4dcbcae@syzkaller.appspotmail.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tadeusz Struk <tadeusz.struk@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-11-04 22:42:49 -04:00
Ewan D. Milne
5ae17501bc scsi: core: Avoid leaving shost->last_reset with stale value if EH does not run
The changes to issue the abort from the scmd->abort_work instead of the EH
thread introduced a problem if eh_deadline is used.  If aborting the
command(s) is successful, and there are never any scmds added to the
shost->eh_cmd_q, there is no code path which will reset the ->last_reset
value back to zero.

The effect of this is that after a successful abort with no EH thread
activity, a subsequent timeout, perhaps a long time later, might
immediately be considered past a user-set eh_deadline time, and the host
will be reset with no attempt at recovery.

Fix this by resetting ->last_reset back to zero in scmd_eh_abort_handler()
if it is determined that the EH thread will not run to do this.

Thanks to Gopinath Marappan for investigating this problem.

Link: https://lore.kernel.org/r/20211029194311.17504-2-emilne@redhat.com
Fixes: e494f6a728 ("[SCSI] improved eh timeout handler")
Cc: stable@vger.kernel.org
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-11-03 21:33:50 -04:00
Christoph Hellwig
0bf6d96cb8 block: remove blk_{get,put}_request
These are now pointless wrappers around blk_mq_{alloc,free}_request,
so remove them.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20211025070517.1548584-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-29 06:50:52 -06:00
Christoph Hellwig
4845012eb5 block: remove QUEUE_FLAG_SCSI_PASSTHROUGH
Export scsi_device_from_queue for use with pktcdvd and use that instead
of the otherwise unused QUEUE_FLAG_SCSI_PASSTHROUGH queue flag.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20211021060607.264371-8-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-22 08:33:57 -06:00
Christoph Hellwig
68ec3b819a scsi: add a scsi_alloc_request helper
Add a new helper that calls blk_get_request and initializes the
scsi_request to avoid the indirect call through ->.initialize_rq_fn.

Note that this makes the pktcdvd driver depend on the SCSI core, but
given that only SCSI devices support SCSI passthrough requests that
is not a functional change.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20211021060607.264371-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-22 08:33:57 -06:00
Jens Axboe
5a72e899ce block: add a struct io_comp_batch argument to fops->iopoll()
struct io_comp_batch contains a list head and a completion handler, which
will allow completions to more effciently completed batches of IO.

For now, no functional changes in this patch, we just define the
io_comp_batch structure and add the argument to the file_operations iopoll
handler.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18 14:40:40 -06:00
Christoph Hellwig
fe45e630a1 block: move integrity handling out of <linux/blkdev.h>
Split the integrity/metadata handling definitions out into a new header.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20210920123328.1399408-17-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-10-18 06:17:02 -06:00
Bart Van Assche
11b68e36b1 scsi: core: Call scsi_done directly
Conditional statements are faster than indirect calls. Hence call
scsi_done() directly. Since this patch removes the last user of the
scsi_done member, also remove that data structure member.

Link: https://lore.kernel.org/r/20211007204618.2196847-11-bvanassche@acm.org
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-16 21:31:43 -04:00
Bart Van Assche
a710eacb9d scsi: core: Rename scsi_mq_done() into scsi_done() and export it
Since the removal of the legacy block layer there is only one completion
function left in the SCSI core, namely scsi_mq_done(). Rename it into
scsi_done(). Export that function to allow SCSI LLDs to call it directly.

Link: https://lore.kernel.org/r/20211007202923.2174984-3-bvanassche@acm.org
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-16 21:28:43 -04:00
Bart Van Assche
bf23e61903 scsi: core: Use a structure member to track the SCSI command submitter
Conditional statements are faster than indirect calls. Use a structure
member to track the SCSI command submitter such that later patches can call
scsi_done(scmd) instead of scmd->scsi_done(scmd).

The asymmetric behavior that scsi_send_eh_cmnd() sets the submission
context to the SCSI error handler and that it does not restore the
submission context to the SCSI core is retained.

Link: https://lore.kernel.org/r/20211007202923.2174984-2-bvanassche@acm.org
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-16 21:28:43 -04:00
Bart Van Assche
e9076e7f23 scsi: core: Fix spelling in a source code comment
The typo in this source code comment makes the comment confusing. Clear up
the confusion by fixing the typo.

Link: https://lore.kernel.org/r/20210929182318.2060489-1-bvanassche@acm.org
Fixes: bc85dc500f ("scsi: remove scsi_end_request")
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-10-04 21:39:57 -04:00
Damien Le Moal
a7d6840bed scsi: core: Fix scsi_mode_select() buffer length handling
The MODE SELECT(6) command allows handling mode page buffers that are up to
255 bytes, including the 4 byte header needed in front of the page
buffer. For requests larger than this limit, automatically use the MODE
SELECT(10) command.

In both cases, since scsi_mode_select() adds the mode select page header,
checks on the buffer length value must include this header size to avoid
overflows of the command CDB allocation length field.

While at it, use put_unaligned_be16() for setting the header block
descriptor length and CDB allocation length when using MODE SELECT(10).

[mkp: fix MODE SENSE vs. MODE SELECT confusion]

Link: https://lore.kernel.org/r/20210820070255.682775-3-damien.lemoal@wdc.com
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-29 00:10:57 -04:00
Damien Le Moal
17b49bcbf8 scsi: core: Fix scsi_mode_sense() buffer length handling
Several problems exist with scsi_mode_sense() buffer length handling:

 1) The allocation length field of the MODE SENSE(10) command is 16-bits,
    occupying bytes 7 and 8 of the CDB. With this command, access to mode
    pages larger than 255 bytes is thus possible. However, the CDB
    allocation length field is set by assigning len to byte 8 only, thus
    truncating buffer length larger than 255.

 2) If scsi_mode_sense() is called with len smaller than 8 with
    sdev->use_10_for_ms set, or smaller than 4 otherwise, the buffer length
    is increased to 8 and 4 respectively, and the buffer is zero filled
    with these increased values, thus corrupting the memory following the
    buffer.

Fix these 2 problems by using put_unaligned_be16() to set the allocation
length field of MODE SENSE(10) CDB and by returning an error when len is
too small.

Furthermore, if len is larger than 255B, always try MODE SENSE(10) first,
even if the device driver did not set sdev->use_10_for_ms. In case of
invalid opcode error for MODE SENSE(10), access to mode pages larger than
255 bytes are not retried using MODE SENSE(6). To avoid buffer length
overflows for the MODE_SENSE(10) case, check that len is smaller than 65535
bytes.

While at it, also fix the folowing:

 * Use get_unaligned_be16() to retrieve the mode data length and block
   descriptor length fields of the mode sense reply header instead of using
   an open coded calculation.

 * Fix the kdoc dbd argument explanation: the DBD bit stands for Disable
   Block Descriptor, which is the opposite of what the dbd argument
   description was.

Link: https://lore.kernel.org/r/20210820070255.682775-2-damien.lemoal@wdc.com
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-09-29 00:10:57 -04:00
John Garry
4c7b6ea336 scsi: core: Remove scsi_cmnd.tag
It is never read, so get rid of it.

Link: https://lore.kernel.org/r/1628862553-179450-4-git-send-email-john.garry@huawei.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-17 22:28:39 -04:00
Bart Van Assche
2266a2def9 scsi: core: Remove the request member from struct scsi_cmnd
Since all scsi_cmnd.request users are gone, remove the request pointer
from struct scsi_cmnd.

Link: https://lore.kernel.org/r/20210809230355.8186-53-bvanassche@acm.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-11 22:25:42 -04:00
Bart Van Assche
aa8e25e500 scsi: core: Use scsi_cmd_to_rq() instead of scsi_cmnd.request
Prepare for removal of the request pointer by using scsi_cmd_to_rq()
instead. Cast away constness where necessary when passing a SCSI command
pointer to scsi_cmd_to_rq(). This patch does not change any functionality.

Link: https://lore.kernel.org/r/20210809230355.8186-3-bvanassche@acm.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-08-11 22:25:37 -04:00
Christoph Hellwig
2cece37784 scsi: scsi_ioctl: Remove scsi_req_init()
Merge scsi_req_init() into its only caller.

Link: https://lore.kernel.org/r/20210724072033.1284840-16-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-28 22:24:26 -04:00
Bart Van Assche
422969bbb5 scsi: core: Fix the documentation of the scsi_execute() time parameter
The unit of the scsi_execute() timeout parameter is 1/HZ seconds instead of
one second, just like the timeouts used in the block layer. Fix the
documentation header above the definition of the scsi_execute() macro.

Link: https://lore.kernel.org/r/20210709202638.9480-3-bvanassche@acm.org
Fixes: "[SCSI] use scatter lists for all block pc requests and simplify hw handlers" # v2.6.16.28
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-07-12 21:40:21 -04:00
Linus Torvalds
8b9cc17a46 SCSI misc on 20210711
This is a set of minor fixes and clean ups in the core and various
 drivers.  The only core change in behaviour is the I/O retry for
 spinup notify, but that shouldn't impact anything other than the
 failing case.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYOqWWyYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishYBtAQCpqVdl
 Axi1SpD6/UuKOgRmboWscoKD8FLHwvLDMRyCRQEAnLu3XdB9HcQrwZOkTG14vrfB
 q2XB5cP4XAITxFLN1qo=
 =9AO9
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull more SCSI updates from James Bottomley:
 "This is a set of minor fixes and clean ups in the core and various
  drivers.

  The only core change in behaviour is the I/O retry for spinup notify,
  but that shouldn't impact anything other than the failing case"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (23 commits)
  scsi: virtio_scsi: Add validation for residual bytes from response
  scsi: ipr: System crashes when seeing type 20 error
  scsi: core: Retry I/O for Notify (Enable Spinup) Required error
  scsi: mpi3mr: Fix warnings reported by smatch
  scsi: qedf: Add check to synchronize abort and flush
  scsi: MAINTAINERS: Add mpi3mr driver maintainers
  scsi: libfc: Fix array index out of bound exception
  scsi: mvsas: Use DEVICE_ATTR_RO()/RW() macro
  scsi: megaraid_mbox: Use DEVICE_ATTR_ADMIN_RO() macro
  scsi: qedf: Use DEVICE_ATTR_RO() macro
  scsi: qedi: Use DEVICE_ATTR_RO() macro
  scsi: message: mptfc: Switch from pci_ to dma_ API
  scsi: be2iscsi: Fix some missing space in some messages
  scsi: be2iscsi: Fix an error handling path in beiscsi_dev_probe()
  scsi: ufs: Fix build warning without CONFIG_PM
  scsi: bnx2fc: Remove meaningless bnx2fc_abts_cleanup() return value assignment
  scsi: qla2xxx: Add heartbeat check
  scsi: virtio_scsi: Do not overwrite SCSI status
  scsi: libsas: Add LUN number check in .slave_alloc callback
  scsi: core: Inline scsi_mq_alloc_queue()
  ...
2021-07-11 10:59:53 -07:00
Linus Torvalds
a022f7d575 block-5.14-2021-07-08
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmDnGVYQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpv6UEAC78zkseI8TmKaowNfkz/+MkP9eSFb1pVn3
 rxpbPOsZompHoZpeWt4oHL+3Rmm3a9iRo/APA2ELas4zvp+Q+6uG7eha2Dc4hUA9
 YgeO4z9YfG8wQNZc3x7bncb6ZwqEE5nnbFe/m25SyrAZVLlZ7FKHxfoZDqjhlGFC
 eLNiYO6vdvwgCoBMcotyCDttrPfEu6947/5vB1zevv57twdQQaEWGUhvyx1XrlDX
 0YD5fmdOjNU2isgxt4xo2Ur2zL6w254/hvj58sV3Z7JfkJpI9DCK+ztKEfzuyEhA
 WYz06rDAT1+1KuVLfowaZ+pYiPPOIsL0+QXI83r3nLaE7WGGlfS8Hmz//1FbziYs
 ZSZI826kEN+/lKeWTcKOOMhmkYyXEFFuQZS34eg9KI4xwML8v+ILlHmcp+tjebw9
 vzNF6f7N2ki+jnyxxyNxeMHxeAMWsqnIRROOhZg6bbs6UVNpDy4qRzpQaDOaJsVe
 uSAQ6PTd/etR9KE+ClhLe6X7Rmp/lfZCPe64wqM/3k1qV2KWhE1fwCQO4c5o1MBN
 rpk3Ef5PZYP3aakCvZnfcjMWlpZNbq/xMc6vPc+yq32akq1t1KbODVBiR5odcH0C
 Gt5N11im50SO06haBt7EOe4JMQLbK5sxG15t4C6mNQZgPegGfaLlVkKpzIkOzUha
 OkRofKMcDA==
 =gHse
 -----END PGP SIGNATURE-----

Merge tag 'block-5.14-2021-07-08' of git://git.kernel.dk/linux-block

Pull more block updates from Jens Axboe:
 "A combination of changes that ended up depending on both the driver
  and core branch (and/or the IDE removal), and a few late arriving
  fixes. In detail:

   - Fix io ticks wrap-around issue (Chunguang)

   - nvme-tcp sock locking fix (Maurizio)

   - s390-dasd fixes (Kees, Christoph)

   - blk_execute_rq polling support (Keith)

   - blk-cgroup RCU iteration fix (Yu)

   - nbd backend ID addition (Prasanna)

   - Partition deletion fix (Yufen)

   - Use blk_mq_alloc_disk for mmc, mtip32xx, ubd (Christoph)

   - Removal of now dead block request types due to IDE removal
     (Christoph)

   - Loop probing and control device cleanups (Christoph)

   - Device uevent fix (Christoph)

   - Misc cleanups/fixes (Tetsuo, Christoph)"

* tag 'block-5.14-2021-07-08' of git://git.kernel.dk/linux-block: (34 commits)
  blk-cgroup: prevent rcu_sched detected stalls warnings while iterating blkgs
  block: fix the problem of io_ticks becoming smaller
  nvme-tcp: can't set sk_user_data without write_lock
  loop: remove unused variable in loop_set_status()
  block: remove the bdgrab in blk_drop_partitions
  block: grab a device refcount in disk_uevent
  s390/dasd: Avoid field over-reading memcpy()
  dasd: unexport dasd_set_target_state
  block: check disk exist before trying to add partition
  ubd: remove dead code in ubd_setup_common
  nvme: use return value from blk_execute_rq()
  block: return errors from blk_execute_rq()
  nvme: use blk_execute_rq() for passthrough commands
  block: support polling through blk_execute_rq
  block: remove REQ_OP_SCSI_{IN,OUT}
  block: mark blk_mq_init_queue_data static
  loop: rewrite loop_exit using idr_for_each_entry
  loop: split loop_lookup
  loop: don't allow deleting an unspecified loop device
  loop: move loop_ctl_mutex locking into loop_add
  ...
2021-07-09 12:05:33 -07:00
Christoph Hellwig
da6269da4c block: remove REQ_OP_SCSI_{IN,OUT}
With the legacy IDE driver gone drivers now use either REQ_OP_DRV_*
or REQ_OP_SCSI_*, so unify the two concepts of passthrough requests
into a single one.

Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-30 15:34:19 -06:00
Quat Le
104739aca4 scsi: core: Retry I/O for Notify (Enable Spinup) Required error
If the device is power-cycled, it takes time for the initiator to transmit
the periodic NOTIFY (ENABLE SPINUP) SAS primitive, and for the device to
respond to the primitive to become ACTIVE. Retry the I/O request to allow
the device time to become ACTIVE.

Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210629155826.48441-1-quat.le@oracle.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Quat Le <quat.le@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-29 16:41:56 -04:00
Bart Van Assche
59506abe5e scsi: core: Inline scsi_mq_alloc_queue()
Since scsi_mq_alloc_queue() only has one caller, inline it. This change was
suggested by Christoph Hellwig.

Link: https://lore.kernel.org/r/20210622024654.12543-1-bvanassche@acm.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Ed Tsai <ed.tsai@mediatek.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-22 21:18:40 -04:00
Hannes Reinecke
3d45cefc8e scsi: core: Drop obsolete Linux-specific SCSI status codes
Originally the SCSI subsystem has been using 'special' SCSI status codes,
which were the SAM-specified ones but shifted by 1.  As most drivers have
now been modified to use the SAM-specified ones, having two nearly
identical sets of definitions only causes confusion.

The Linux-specifed SCSI status codes have been marked obsolete for several
years so drop them and use the SAM-specified status codes throughout.

Link: https://lore.kernel.org/r/20210427083046.31620-41-hare@suse.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-05-31 23:59:18 -04:00
Hannes Reinecke
a7479a8477 scsi: core: Kill message byte
Remove last vestiges of SCSI status message bytes.

Link: https://lore.kernel.org/r/20210427083046.31620-39-hare@suse.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-05-31 22:48:24 -04:00
Hannes Reinecke
464a00c9e0 scsi: core: Kill DRIVER_SENSE
Replace the check for DRIVER_SENSE with a check for
scsi_status_is_check_condition().

Audit all callsites to ensure the SAM status is set correctly. For
backwards compability move the DRIVER_SENSE definition to sg.h, and update
sg, bsg, and scsi_ioctl to set the DRIVER_SENSE driver_status whenever
SAM_STAT_CHECK_CONDITION is present.

[mkp: fix zeroday srp warning]

Link: https://lore.kernel.org/r/20210427083046.31620-10-hare@suse.de
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

fix
2021-05-31 22:48:21 -04:00
Hannes Reinecke
d0672a03e0 scsi: core: Introduce scsi_status_is_check_condition()
Add a helper function scsi_status_is_check_condition() to encapsulate the
frequent checks for SAM_STAT_CHECK_CONDITION.

Link: https://lore.kernel.org/r/20210427083046.31620-9-hare@suse.de
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-05-31 22:48:21 -04:00
Hannes Reinecke
f2b1e9c6f8 scsi: core: Introduce scsi_build_sense()
Introduce scsi_build_sense() as a wrapper around scsi_build_sense_buffer()
to format the buffer and set the correct SCSI status.

Link: https://lore.kernel.org/r/20210427083046.31620-8-hare@suse.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-05-31 22:48:21 -04:00
Hannes Reinecke
ced202f7bd scsi: core: Stop using DRIVER_ERROR
Return the actual error code in __scsi_execute() (which, according to the
documentation, should have happened anyway).  And audit all callers to cope
with negative return values from __scsi_execute() and friends.

[mkp: resolve conflict and return bool]

Link: https://lore.kernel.org/r/20210427083046.31620-7-hare@suse.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-05-31 22:48:21 -04:00
Hannes Reinecke
64aaa3dd09 scsi: core: Reshuffle response handling in scsi_mode_sense()
Reshuffle response handling in scsi_mode_sense() to make the code easier to
follow.

[mkp: fix build]

Link: https://lore.kernel.org/r/20210427083046.31620-5-hare@suse.de
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-05-31 22:48:21 -04:00
Hannes Reinecke
8793613de9 scsi: core: Fixup calling convention for scsi_mode_sense()
The description for scsi_mode_sense() claims to return the number of valid
bytes on success, which is not what the code does.  Additionally there is
no gain in returning the SCSI status, as everything the callers do is to
check against scsi_result_is_good(), which is what scsi_mode_sense() does
already.  So change the calling convention to return a standard error code
on failure, and 0 on success, and adapt the description and all callers.

Link: https://lore.kernel.org/r/20210427083046.31620-4-hare@suse.de
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-05-31 22:48:20 -04:00
Linus Torvalds
d72cd4ad41 SCSI misc on 20210428
This series consists of the usual driver updates (ufs, target, tcmu,
 smartpqi, lpfc, zfcp, qla2xxx, mpt3sas, pm80xx).  The major core
 change is using a sbitmap instead of an atomic for queue tracking.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYInvqCYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishYh2AP0SgqqL
 WYZRT2oiyBOKD28v+ceOSiXvgjPlqABwVMC0BAEAn29/wNCxyvzZ1k/b0iPJ4M+S
 klkSxLzXKQLzJBgdK5w=
 =p5B/
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This consists of the usual driver updates (ufs, target, tcmu,
  smartpqi, lpfc, zfcp, qla2xxx, mpt3sas, pm80xx).

  The major core change is using a sbitmap instead of an atomic for
  queue tracking"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (412 commits)
  scsi: target: tcm_fc: Fix a kernel-doc header
  scsi: target: Shorten ALUA error messages
  scsi: target: Fix two format specifiers
  scsi: target: Compare explicitly with SAM_STAT_GOOD
  scsi: sd: Introduce a new local variable in sd_check_events()
  scsi: dc395x: Open-code status_byte(u8) calls
  scsi: 53c700: Open-code status_byte(u8) calls
  scsi: smartpqi: Remove unused functions
  scsi: qla4xxx: Remove an unused function
  scsi: myrs: Remove unused functions
  scsi: myrb: Remove unused functions
  scsi: mpt3sas: Fix two kernel-doc headers
  scsi: fcoe: Suppress a compiler warning
  scsi: libfc: Fix a format specifier
  scsi: aacraid: Remove an unused function
  scsi: core: Introduce enum scsi_disposition
  scsi: core: Modify the scsi_send_eh_cmnd() return value for the SDEV_BLOCK case
  scsi: core: Rename scsi_softirq_done() into scsi_complete()
  scsi: core: Remove an incorrect comment
  scsi: core: Make the scsi_alloc_sgtables() documentation more accurate
  ...
2021-04-28 17:22:10 -07:00
Bart Van Assche
b8e162f9e7 scsi: core: Introduce enum scsi_disposition
Improve readability of the code in the SCSI core by introducing an
enumeration type for the values used internally that decide how to continue
processing a SCSI command. The eh_*_handler return values have not been
changed because that would involve modifying all SCSI drivers.

The output of the following command has been inspected to verify that no
out-of-range values are assigned to a variable of type enum
scsi_disposition:

KCFLAGS=-Wassign-enum make CC=clang W=1 drivers/scsi/

Link: https://lore.kernel.org/r/20210415220826.29438-6-bvanassche@acm.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15 22:44:40 -04:00
Bart Van Assche
0d2810cd62 scsi: core: Rename scsi_softirq_done() into scsi_complete()
Commit 320ae51fee ("blk-mq: new multi-queue block IO queueing mechanism";
v3.13) introduced a code path that calls the blk-mq completion function
from interrupt context. scsi-mq was introduced by commit d285203cf6
("scsi: add support for a blk-mq based I/O path."; v3.17).

Since the introduction of scsi-mq, scsi_softirq_done() can be called from
interrupt context. That made the name of the function misleading, rename it
to scsi_complete().

Link: https://lore.kernel.org/r/20210415220826.29438-4-bvanassche@acm.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15 22:44:40 -04:00
Bart Van Assche
76fc0df9a0 scsi: core: Make the scsi_alloc_sgtables() documentation more accurate
The current scsi_alloc_sgtables() documentation does not accurately explain
what this function does. Hence improve the documentation of this function.

Link: https://lore.kernel.org/r/20210415220826.29438-2-bvanassche@acm.org
Cc: Christoph Hellwig <hch@lst.de>
Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-04-15 22:44:39 -04:00
Christoph Hellwig
aaff5ebaa2 scsi: remove the unchecked_isa_dma flag
Remove the unchecked_isa_dma now that all users are gone.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/20210331073001.46776-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-04-06 09:28:17 -06:00
Kashyap Desai
4309ea74b0 scsi: core: Set shost as hctx driver_data
hctx->driver_data is not set for SCSI currently. Set hctx->driver_data =
shost.

Link: https://lore.kernel.org/r/20210215074048.19424-6-kashyap.desai@broadcom.com
Suggested-by: John Garry <john.garry@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-04 17:37:03 -05:00
Kashyap Desai
af1830956d scsi: core: Add mq_poll support to SCSI layer
Currently IOPOLL support is only available in block layer. This patch
adds mq_poll support to the SCSI layer.

Link: https://lore.kernel.org/r/20210215074048.19424-2-kashyap.desai@broadcom.com
Cc: sumit.saxena@broadcom.com
Cc: chandrakanth.patil@broadcom.com
Cc: linux-block@vger.kernel.org
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-04 17:37:03 -05:00
Ming Lei
020b0f0a31 scsi: core: Replace sdev->device_busy with sbitmap
SCSI currently uses an atomic variable to track queue depth for each
attached device. The queue depth depends on many factors such as transport
type and device implementation. In addition, the SCSI device queue depth is
not a static entity but changes over time as a result of congestion
management.

While blk-mq currently tracks queue depth for each hctx, it can't easily be
changed to accommodate the SCSI per-device requirement.

The current approach of using an atomic variable doesn't scale well when
there are lots of CPU cores and the disk is very fast. IOPS can be
substantially impacted by the atomic in the hot path.

Replace the atomic variable sdev->device_busy with an sbitmap for tracking
the SCSI device queue depth.

It has been observed that IOPS is improved ~30% by this patchset in the
following test:

1) test machine(32 logical CPU cores)
	Thread(s) per core:  2
	Core(s) per socket:  8
	Socket(s):           2
	NUMA node(s):        2
	Model name:          Intel(R) Xeon(R) Silver 4110 CPU @ 2.10GHz

2) setup scsi_debug:
modprobe scsi_debug virtual_gb=128 max_luns=1 submit_queues=32 delay=0 max_queue=256

3) fio script:
fio --rw=randread --size=128G --direct=1 --ioengine=libaio --iodepth=2048 \
	--numjobs=32 --bs=4k --group_reporting=1 --group_reporting=1 --runtime=60 \
	--loops=10000 --name=job1 --filename=/dev/sdN

[mkp: fix device_busy reference in mpt3sas]

Link: https://lore.kernel.org/r/20210122023317.687987-14-ming.lei@redhat.com
Link: https://lore.kernel.org/linux-block/20200119071432.18558-6-ming.lei@redhat.com/
Cc: Omar Sandoval <osandov@fb.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Sumanesh Samanta <sumanesh.samanta@broadcom.com>
Cc: Ewan D. Milne <emilne@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Tested-by: Sumanesh Samanta <sumanesh.samanta@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-04 17:37:00 -05:00
Ming Lei
8278807abd scsi: core: Add scsi_device_busy() wrapper
Add scsi_device_busy() helper to prepare drivers for tracking device queue
depth via sbitmap_queue.

Link: https://lore.kernel.org/r/20210122023317.687987-12-ming.lei@redhat.com
Cc: Omar Sandoval <osandov@fb.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Sumanesh Samanta <sumanesh.samanta@broadcom.com>
Cc: Ewan D. Milne <emilne@redhat.com>
Tested-by: Sumanesh Samanta <sumanesh.samanta@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-04 17:37:00 -05:00
Ming Lei
2a5a24aa83 scsi: blk-mq: Return budget token from .get_budget callback
SCSI uses a global atomic variable to track queue depth for each
LUN/request queue.

This doesn't scale well when there are lots of CPU cores and the disk is
very fast. It has been observed that IOPS is affected a lot by tracking
queue depth via sdev->device_busy in the I/O path.

Return budget token from .get_budget callback. The budget token can be
passed to driver so that we can replace the atomic variable with
sbitmap_queue and alleviate the scaling problems that way.

Link: https://lore.kernel.org/r/20210122023317.687987-9-ming.lei@redhat.com
Cc: Omar Sandoval <osandov@fb.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Sumanesh Samanta <sumanesh.samanta@broadcom.com>
Cc: Ewan D. Milne <emilne@redhat.com>
Tested-by: Sumanesh Samanta <sumanesh.samanta@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-04 17:36:59 -05:00
Ming Lei
d022d18c04 scsi: blk-mq: Add callbacks for storing & retrieving budget token
Since SCSI is the only driver which requires dispatch budget move the token
from struct request to struct scsi_cmnd.

Link: https://lore.kernel.org/r/20210122023317.687987-8-ming.lei@redhat.com
Cc: Omar Sandoval <osandov@fb.com>
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Sumanesh Samanta <sumanesh.samanta@broadcom.com>
Cc: Ewan D. Milne <emilne@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Tested-by: Sumanesh Samanta <sumanesh.samanta@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-03-04 17:36:59 -05:00
Linus Torvalds
bdb39c9509 SCSI misc on 20210219
This series consists of the usual driver updates (ufs, ibmvfc,
 qla2xxx, hisi_sas, pm80xx) plus the removal of the gdth driver (which
 is bound to cause conflicts with a trivial change somewhere).  The
 only big major rework of note is the one from Hannes trying to clean
 up our result handling code in the drivers to make it consistent.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYDAdliYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishTblAQCk6wD8
 fcb4TItSRp0DpRzs37zhppEbrBgveuAFHhr5swEA0gL2mHcq0vnyNBinCLnERrE7
 TPYJqUKJNktnjVG7ZWc=
 =wW6p
 -----END PGP SIGNATURE-----

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This series consists of the usual driver updates (ufs, ibmvfc,
  qla2xxx, hisi_sas, pm80xx) plus the removal of the gdth driver (which
  is bound to cause conflicts with a trivial change somewhere).

  The only big major rework of note is the one from Hannes trying to
  clean up our result handling code in the drivers to make it
  consistent"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (194 commits)
  scsi: MAINTAINERS: Adjust to reflect gdth scsi driver removal
  scsi: ufs: Give clk scaling min gear a value
  scsi: lpfc: Fix 'physical' typos
  scsi: megaraid_mbox: Fix spelling of 'allocated'
  scsi: qla2xxx: Simplify the calculation of variables
  scsi: message: fusion: Fix 'physical' typos
  scsi: target: core: Change ASCQ for residual write
  scsi: target: core: Signal WRITE residuals
  scsi: target: core: Set residuals for 4Kn devices
  scsi: hisi_sas: Add trace FIFO debugfs support
  scsi: hisi_sas: Flush workqueue in hisi_sas_v3_remove()
  scsi: hisi_sas: Enable debugfs support by default
  scsi: hisi_sas: Don't check .nr_hw_queues in hisi_sas_task_prep()
  scsi: hisi_sas: Remove deferred probe check in hisi_sas_v2_probe()
  scsi: lpfc: Add auto select on IRQ_POLL
  scsi: ncr53c8xx: Fix typos
  scsi: lpfc: Fix ancient double free
  scsi: qla2xxx: Fix some memory corruption
  scsi: qla2xxx: Remove redundant NULL check
  scsi: megaraid: Fix ifnullfree.cocci warnings
  ...
2021-02-22 10:24:58 -08:00
Guoqing Jiang
684da7628d block: remove unnecessary argument from blk_execute_rq
We can remove 'q' from blk_execute_rq as well after the previous change
in blk_execute_rq_nowait.

And more importantly it never really was needed to start with given
that we can trivial derive it from struct request.

Cc: linux-scsi@vger.kernel.org
Cc: virtualization@lists.linux-foundation.org
Cc: linux-ide@vger.kernel.org
Cc: linux-mmc@vger.kernel.org
Cc: linux-nvme@lists.infradead.org
Cc: linux-nfs@vger.kernel.org
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc
Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-24 21:52:39 -07:00
Muneendra Kumar
962c8dcdd5 scsi: core: Add a new error code DID_TRANSPORT_MARGINAL in scsi.h
Add code in scsi_result_to_blk_status to translate a new error
DID_TRANSPORT_MARGINAL to the corresponding blk_status_t i.e
BLK_STS_TRANSPORT.

Add DID_TRANSPORT_MARGINAL case to scsi_decide_disposition().

Link: https://lore.kernel.org/r/1609969748-17684-2-git-send-email-muneendra.kumar@broadcom.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Muneendra Kumar <muneendra.kumar@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-01-14 22:55:17 -05:00