mirror of
https://mirrors.bfsu.edu.cn/git/linux.git
synced 2024-11-26 13:44:15 +08:00
aaa44952bb
1011967 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Sid Manning
|
aaa44952bb |
Hexagon: remove DEBUG from comet config
Remove CONFIG_DEBUG_INFO from comet configuration. Signed-off-by: Sid Manning <sidneym@codeaurora.org> Signed-off-by: Brian Cain <bcain@codeaurora.org> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> |
||
|
Sid Manning
|
6fff7410f6 |
Hexagon: change jumps to must-extend in futex_atomic_*
Cross-section jumps from .fixup section must be extended. Signed-off-by: Sid Manning <sidneym@codeaurora.org> Signed-off-by: Brian Cain <bcain@codeaurora.org> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> |
||
|
Sid Manning
|
788dcee030 |
Hexagon: fix build errors
Fix type-o in ptrace.c. Add missing include: asm/hexagon_vm.h Remove superfluous cast. Replace 'p3_0' with 'preds'. Signed-off-by: Sid Manning <sidneym@codeaurora.org> Add -mlong-calls to build flags. Signed-off-by: Brian Cain <bcain@codeaurora.org> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> |
||
Linus Torvalds
|
9ccce092fc |
orangefs: implement orangefs_readahead
mm/readahead.c/read_pages was quite a bit different back
when I put my open-coded readahead logic into orangefs_readpage.
It seemed to work as designed then, it is a trainwreck now.
This patch implements orangefs_readahead using new xarray
and readahead_expand features that have just been pulled and
removes all my open-coded readahead logic.
This patch results in an extreme read performance improvement,
these sample numbers are from my test VM:
Here's an example of what's upstream in
5.11.8-200.fc33.x86_64:
30+0 records in
30+0 records out
125829120 bytes (126 MB, 120 MiB) copied, 5.77943 s, 21.8 MB/s
And here's this version of orangefs_readahead on top of
5.12.0-rc4:
30+0 records in
30+0 records out
125829120 bytes (126 MB, 120 MiB) copied, 0.325919 s, 386 MB/s
There are four xfstest regressions with this patch. David Howells
and Matthew Wilcox have been helping me work with this code. One
of the regressions has gone away with the most recent version of
their code that I'm using. I hope this patch can be
pulled even though there are still a few regressions, and that
we can try to get them resolved during the RC period.
-----BEGIN PGP SIGNATURE-----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=09Vm
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.13-ofs-1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux
Pull orangefs updates from Mike Marshall:
"orangefs: implement orangefs_readahead
mm/readahead.c/read_pages was quite a bit different back when I put my
open-coded readahead logic into orangefs_readpage. That logic seemed
to work as designed back then, it is a trainwreck now.
This implements orangefs_readahead using the new xarray and
readahead_expand features and removes all my open-coded readahead
logic.
This results in an extreme read performance improvement, these sample
numbers are from my test VM:
Here's an example of what's upstream in
5.11.8-200.fc33.x86_64:
30+0 records in
30+0 records out
125829120 bytes (126 MB, 120 MiB) copied, 5.77943 s, 21.8 MB/s
And here's this version of orangefs_readahead on top of 5.12.0-rc4:
30+0 records in
30+0 records out
125829120 bytes (126 MB, 120 MiB) copied, 0.325919 s, 386 MB/s
There are four xfstest regressions with this patch. David Howells and
Matthew Wilcox have been helping me work with this code"
* tag 'for-linus-5.13-ofs-1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
orangefs: leave files in the page cache for a few micro seconds at least
Orangef: implement orangefs_readahead.
|
||
|
Linus Torvalds
|
27787ba3fa |
Merge branch 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs updates from Al Viro: "Assorted stuff all over the place" * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: useful constants: struct qstr for ".." hostfs_open(): don't open-code file_dentry() whack-a-mole: kill strlen_user() (again) autofs: should_expire() argument is guaranteed to be positive apparmor:match_mn() - constify devpath argument buffer: a small optimization in grow_buffers get rid of autofs_getpath() constify dentry argument of dentry_path()/dentry_path_raw() |
||
|
Linus Torvalds
|
b28866f4bb |
Merge branch 'work.ecryptfs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull exryptfs updates from Al Viro: "The interesting part here is (ecryptfs) lock_parent() fixes - its treatment of ->d_parent had been very wrong. The rest is trivial cleanups" * 'work.ecryptfs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: ecryptfs: ecryptfs_dentry_info->crypt_stat is never used ecryptfs: get rid of unused accessors ecryptfs: saner API for lock_parent() ecryptfs: get rid of pointless dget/dput in ->symlink() and ->link() |
||
|
Linus Torvalds
|
17ae69aba8 |
Add Landlock, a new LSM from Mickaël Salaün <mic@linux.microsoft.com>
-----BEGIN PGP SIGNATURE-----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=uCN4
-----END PGP SIGNATURE-----
Merge tag 'landlock_v34' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull Landlock LSM from James Morris:
"Add Landlock, a new LSM from Mickaël Salaün.
Briefly, Landlock provides for unprivileged application sandboxing.
From Mickaël's cover letter:
"The goal of Landlock is to enable to restrict ambient rights (e.g.
global filesystem access) for a set of processes. Because Landlock
is a stackable LSM [1], it makes possible to create safe security
sandboxes as new security layers in addition to the existing
system-wide access-controls. This kind of sandbox is expected to
help mitigate the security impact of bugs or unexpected/malicious
behaviors in user-space applications. Landlock empowers any
process, including unprivileged ones, to securely restrict
themselves.
Landlock is inspired by seccomp-bpf but instead of filtering
syscalls and their raw arguments, a Landlock rule can restrict the
use of kernel objects like file hierarchies, according to the
kernel semantic. Landlock also takes inspiration from other OS
sandbox mechanisms: XNU Sandbox, FreeBSD Capsicum or OpenBSD
Pledge/Unveil.
In this current form, Landlock misses some access-control features.
This enables to minimize this patch series and ease review. This
series still addresses multiple use cases, especially with the
combined use of seccomp-bpf: applications with built-in sandboxing,
init systems, security sandbox tools and security-oriented APIs [2]"
The cover letter and v34 posting is here:
https://lore.kernel.org/linux-security-module/20210422154123.13086-1-mic@digikod.net/
See also:
https://landlock.io/
This code has had extensive design discussion and review over several
years"
Link: https://lore.kernel.org/lkml/50db058a-7dde-441b-a7f9-f6837fe8b69f@schaufler-ca.com/ [1]
Link: https://lore.kernel.org/lkml/f646e1c7-33cf-333f-070c-0a40ad0468cd@digikod.net/ [2]
* tag 'landlock_v34' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
landlock: Enable user space to infer supported features
landlock: Add user and kernel documentation
samples/landlock: Add a sandbox manager example
selftests/landlock: Add user space tests
landlock: Add syscall implementations
arch: Wire up Landlock syscalls
fs,security: Add sb_delete hook
landlock: Support filesystem access-control
LSM: Infrastructure management of the superblock
landlock: Add ptrace restrictions
landlock: Set up the security framework and manage credentials
landlock: Add ruleset and domain management
landlock: Add object management
|
||
|
Linus Torvalds
|
e6f0bf09f0 |
integrity-v5.13
-----BEGIN PGP SIGNATURE----- iQJIBAABCAAyFiEEjSMCCC7+cjo3nszSa3kkZrA+cVoFAmCIuMgUHHpvaGFyQGxp bnV4LmlibS5jb20ACgkQa3kkZrA+cVqCew//SHwZ3LuqZUyqX1lCeW0eUsJQmf9P Rc++pK5+cigaYwg/LpLXBtIthOO91KJ+p4UrXIttlz6wRWqH5Enm/nQk3ngIIrWJ g4HsU4LoXeE5V1QZgDdUWM+ViaNvZuzT8enaUt4VvelHTRMoAgeTu7/amjx01t9L R8Qhmg2tBI5ehRgocNfEApNfaDyOcJhR14wAnGFhQH1pH2o0e+O+L5E6ke3Z2N0D oa9LBkA2wZFlTXkYHAYBdZjPW0BXX55brIusLHhrvFC16Ad9IVwcxRvRwYy4v2IK p8kO7EwGO4IkqsuL6FApgbW8/dTZXo3pD8YmplXhQdvAd9L/LshYhDePX7UsEp+O CL3rFvNFzZKC5qTx0UXLqjcktosOLTTFkAzRMg5taTljbTWBp9ziI8X0nTgoThLH fTs41Ol5v5veiq8JbZ1VixCoDJVOWtED/FuSZD41OyXJb7yGNpTnmvP6QJNIa1Yo vWsxSWmEX62xT85CzYLBR1Ow5+9t9+IjoCRt0pu0SRSps4gYcg1BjS+gIFnuCtB/ B9Ysh+rHo9ne9iojFd9TrEYQSAXebVEYSOjqPWV3E7gd0EXuF+JY0akj8JBduHt3 mfogxVtJdaHDjHtpHoHhBTpHG8l/E2n/47eFDmCiTsBGdL54R4jJSkOu8QmWBgzz HVNX+f86SJ2haUw= =gkFF -----END PGP SIGNATURE----- Merge tag 'integrity-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity Pull IMA updates from Mimi Zohar: "In addition to loading the kernel module signing key onto the builtin keyring, load it onto the IMA keyring as well. Also six trivial changes and bug fixes" * tag 'integrity-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: ima: ensure IMA_APPRAISE_MODSIG has necessary dependencies ima: Fix fall-through warnings for Clang integrity: Add declarations to init_once void arguments. ima: Fix function name error in comment. ima: enable loading of build time generated key on .ima keyring ima: enable signing of modules with build time generated key keys: cleanup build time module signing keys ima: Fix the error code for restoring the PCR value ima: without an IMA policy loaded, return quickly |
||
|
Linus Torvalds
|
10a3efd0fe |
perf tools changes for v5.13: 1st batch
perf stat:
- Add support for hybrid PMUs to support systems such as Intel Alderlake
and its BIG/little core/atom cpus.
- Introduce 'bperf' to share hardware PMCs with BPF.
- New --iostat option to collect and present IO stats on Intel hardware.
This functionality is based on recently introduced sysfs attributes
for Intel® Xeon® Scalable processor family (code name Skylake-SP):
commit
|
||
David Howells
|
22650f1481 |
afs: Fix speculative status fetches
The generic/464 xfstest causes kAFS to emit occasional warnings of the
form:
kAFS: vnode modified {100055:8a} 30->31 YFS.StoreData64 (c=6015)
This indicates that the data version received back from the server did not
match the expected value (the DV should be incremented monotonically for
each individual modification op committed to a vnode).
What is happening is that a lookup call is doing a bulk status fetch
speculatively on a bunch of vnodes in a directory besides getting the
status of the vnode it's actually interested in. This is racing with a
StoreData operation (though it could also occur with, say, a MakeDir op).
On the client, a modification operation locks the vnode, but the bulk
status fetch only locks the parent directory, so no ordering is imposed
there (thereby avoiding an avenue to deadlock).
On the server, the StoreData op handler doesn't lock the vnode until it's
received all the request data, and downgrades the lock after committing the
data until it has finished sending change notifications to other clients -
which allows the status fetch to occur before it has finished.
This means that:
- a status fetch can access the target vnode either side of the exclusive
section of the modification
- the status fetch could start before the modification, yet finish after,
and vice-versa.
- the status fetch and the modification RPCs can complete in either order.
- the status fetch can return either the before or the after DV from the
modification.
- the status fetch might regress the locally cached DV.
Some of these are handled by the previous fix[1], but that's not sufficient
because it checks the DV it received against the DV it cached at the start
of the op, but the DV might've been updated in the meantime by a locally
generated modification op.
Fix this by the following means:
(1) Keep track of when we're performing a modification operation on a
vnode. This is done by marking vnode parameters with a 'modification'
note that causes the AFS_VNODE_MODIFYING flag to be set on the vnode
for the duration.
(2) Alter the speculation race detection to ignore speculative status
fetches if either the vnode is marked as being modified or the data
version number is not what we expected.
Note that whilst the "vnode modified" warning does get recovered from as it
causes the client to refetch the status at the next opportunity, it will
also invalidate the pagecache, so changes might get lost.
Fixes:
|
||
|
Linus Torvalds
|
7af81cd0c4 |
- Improve scalability of DM's device hash by switching to rbtree
- Extend DM ioctl's DM_LIST_DEVICES_CMD handling to include UUID and
allow filtering based on name or UUID prefix.
- Various small fixes for typos, warnings, unused function, or
needlessly exported interfaces.
- Remove needless request_queue NULL pointer checks in DM thin and
cache targets.
- Remove unnecessary loop in DM core's __split_and_process_bio().
- Remove DM core's dm_vcalloc() and just use kvcalloc or
kvmalloc_array instead (depending whether zeroing is useful).
- Fix request-based DM's double free of blk_mq_tag_set in device
remove after table load fails.
- Improve DM persistent data performance on non-x86 by fixing packed
structs to have a stated alignment. Also remove needless extra work
from redundant calls to sm_disk_get_nr_free() and a paranoid BUG_ON()
that caused duplicate checksum calculation.
- Fix missing goto in DM integrity's bitmap_flush_interval error
handling.
- Add "reset_recalculate" feature flag to DM integrity.
- Improve DM integrity by leveraging discard support to avoid needless
re-writing of metadata and also use discard support to improve
hash recalculation.
- Fix race with DM raid target's reshape and MD raid4/5/6 resync that
resulted in inconsistant reshape state during table reloads.
- Update DM raid target to temove unnecessary discard limits for raid0
and raid10 now that MD has optimized discard handling for both raid
levels.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAmCMVxkTHHNuaXR6ZXJA
cmVkaGF0LmNvbQAKCRDFI/EKLZ0DWjD7B/4mucuval0w8OBl7MPE5mR/tPmU/Avr
iFmXQjofjXCXGdCk7XqOqKZGKlm/jCTQkhbZPEo5PTCZPf6iGyeoSFOC0xck9HUI
9EJNrnx6L0ch3OS5IREgc3oO7vXFnmnLvmo27t7yUaqWqdMBIZ/rEA6Ro7oq4pXc
fo/Yqka2iuS0X2RKhAbci2KAOWdeX400nqH7bHaR5VgOE3JRJtsEWRTmkngB4bzM
Bsz2zzaSnbFa/Nlg2cH69kw2NJpZsAoKmoQ0OJt7QQs+GYLvCbioQnlxLPSFhlKX
4mSPPPKy3TxaAqsHXt+gCG6Vs8VvvgK0iHIa9e0ifIy3wvLoosLpIXhc
=k1ND
-----END PGP SIGNATURE-----
Merge tag 'for-5.13/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Improve scalability of DM's device hash by switching to rbtree
- Extend DM ioctl's DM_LIST_DEVICES_CMD handling to include UUID and
allow filtering based on name or UUID prefix.
- Various small fixes for typos, warnings, unused function, or
needlessly exported interfaces.
- Remove needless request_queue NULL pointer checks in DM thin and
cache targets.
- Remove unnecessary loop in DM core's __split_and_process_bio().
- Remove DM core's dm_vcalloc() and just use kvcalloc or kvmalloc_array
instead (depending whether zeroing is useful).
- Fix request-based DM's double free of blk_mq_tag_set in device remove
after table load fails.
- Improve DM persistent data performance on non-x86 by fixing packed
structs to have a stated alignment. Also remove needless extra work
from redundant calls to sm_disk_get_nr_free() and a paranoid BUG_ON()
that caused duplicate checksum calculation.
- Fix missing goto in DM integrity's bitmap_flush_interval error
handling.
- Add "reset_recalculate" feature flag to DM integrity.
- Improve DM integrity by leveraging discard support to avoid needless
re-writing of metadata and also use discard support to improve hash
recalculation.
- Fix race with DM raid target's reshape and MD raid4/5/6 resync that
resulted in inconsistant reshape state during table reloads.
- Update DM raid target to temove unnecessary discard limits for raid0
and raid10 now that MD has optimized discard handling for both raid
levels.
* tag 'for-5.13/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (26 commits)
dm raid: remove unnecessary discard limits for raid0 and raid10
dm rq: fix double free of blk_mq_tag_set in dev remove after table load fails
dm integrity: use discard support when recalculating
dm integrity: increase RECALC_SECTORS to improve recalculate speed
dm integrity: don't re-write metadata if discarding same blocks
dm raid: fix inconclusive reshape layout on fast raid4/5/6 table reload sequences
dm raid: fix fall-through warning in rs_check_takeover() for Clang
dm clone metadata: remove unused function
dm integrity: fix missing goto in bitmap_flush_interval error handling
dm: replace dm_vcalloc()
dm space map common: fix division bug in sm_ll_find_free_block()
dm persistent data: packed struct should have an aligned() attribute too
dm btree spine: remove paranoid node_check call in node_prep_for_write()
dm space map disk: remove redundant calls to sm_disk_get_nr_free()
dm integrity: add the "reset_recalculate" feature flag
dm persistent data: remove unused return from exit_shadow_spine()
dm cache: remove needless request_queue NULL pointer checks
dm thin: remove needless request_queue NULL pointer check
dm: unexport dm_{get,put}_table_device
dm ebs: fix a few typos
...
|
||
|
Linus Torvalds
|
152d32aa84 |
ARM:
- Stage-2 isolation for the host kernel when running in protected mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
x86:
- Optimizations and cleanup of nested SVM code
- AMD: Support for virtual SPEC_CTRL
- Optimizations of the new MMU code: fast invalidation,
zap under read lock, enable/disably dirty page logging under
read lock
- /dev/kvm API for AMD SEV live migration (guest API coming soon)
- support SEV virtual machines sharing the same encryption context
- support SGX in virtual machines
- add a few more statistics
- improved directed yield heuristics
- Lots and lots of cleanups
Generic:
- Rework of MMU notifier interface, simplifying and optimizing
the architecture-specific code
- Some selftests improvements
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmCJ13kUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroM1HAgAqzPxEtiTPTFeFJV5cnPPJ3dFoFDK
y/juZJUQ1AOtvuWzzwuf175ewkv9vfmtG6rVohpNSkUlJYeoc6tw7n8BTTzCVC1b
c/4Dnrjeycr6cskYlzaPyV6MSgjSv5gfyj1LA5UEM16LDyekmaynosVWY5wJhju+
Bnyid8l8Utgz+TLLYogfQJQECCrsU0Wm//n+8TWQgLf1uuiwshU5JJe7b43diJrY
+2DX+8p9yWXCTz62sCeDWNahUv8AbXpMeJ8uqZPYcN1P0gSEUGu8xKmLOFf9kR7b
M4U1Gyz8QQbjd2lqnwiWIkvRLX6gyGVbq2zH0QbhUe5gg3qGUX7JjrhdDQ==
=AXUi
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"This is a large update by KVM standards, including AMD PSP (Platform
Security Processor, aka "AMD Secure Technology") and ARM CoreSight
(debug and trace) changes.
ARM:
- CoreSight: Add support for ETE and TRBE
- Stage-2 isolation for the host kernel when running in protected
mode
- Guest SVE support when running in nVHE mode
- Force W^X hypervisor mappings in nVHE mode
- ITS save/restore for guests using direct injection with GICv4.1
- nVHE panics now produce readable backtraces
- Guest support for PTP using the ptp_kvm driver
- Performance improvements in the S2 fault handler
x86:
- AMD PSP driver changes
- Optimizations and cleanup of nested SVM code
- AMD: Support for virtual SPEC_CTRL
- Optimizations of the new MMU code: fast invalidation, zap under
read lock, enable/disably dirty page logging under read lock
- /dev/kvm API for AMD SEV live migration (guest API coming soon)
- support SEV virtual machines sharing the same encryption context
- support SGX in virtual machines
- add a few more statistics
- improved directed yield heuristics
- Lots and lots of cleanups
Generic:
- Rework of MMU notifier interface, simplifying and optimizing the
architecture-specific code
- a handful of "Get rid of oprofile leftovers" patches
- Some selftests improvements"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (379 commits)
KVM: selftests: Speed up set_memory_region_test
selftests: kvm: Fix the check of return value
KVM: x86: Take advantage of kvm_arch_dy_has_pending_interrupt()
KVM: SVM: Skip SEV cache flush if no ASIDs have been used
KVM: SVM: Remove an unnecessary prototype declaration of sev_flush_asids()
KVM: SVM: Drop redundant svm_sev_enabled() helper
KVM: SVM: Move SEV VMCB tracking allocation to sev.c
KVM: SVM: Explicitly check max SEV ASID during sev_hardware_setup()
KVM: SVM: Unconditionally invoke sev_hardware_teardown()
KVM: SVM: Enable SEV/SEV-ES functionality by default (when supported)
KVM: SVM: Condition sev_enabled and sev_es_enabled on CONFIG_KVM_AMD_SEV=y
KVM: SVM: Append "_enabled" to module-scoped SEV/SEV-ES control variables
KVM: SEV: Mask CPUID[0x8000001F].eax according to supported features
KVM: SVM: Move SEV module params/variables to sev.c
KVM: SVM: Disable SEV/SEV-ES if NPT is disabled
KVM: SVM: Free sev_asid_bitmap during init if SEV setup fails
KVM: SVM: Zero out the VMCB array used to track SEV ASID association
x86/sev: Drop redundant and potentially misleading 'sev_enabled'
KVM: x86: Move reverse CPUID helpers to separate header file
KVM: x86: Rename GPR accessors to make mode-aware variants the defaults
...
|
||
|
Linus Torvalds
|
4f9701057a |
IOMMU Updates for Linux v5.13
Including:
- Big cleanup of almost unsused parts of the IOMMU API by
Christoph Hellwig. This mostly affects the Freescale PAMU
driver.
- New IOMMU driver for Unisoc SOCs
- ARM SMMU Updates from Will:
- SMMUv3: Drop vestigial PREFETCH_ADDR support
- SMMUv3: Elide TLB sync logic for empty gather
- SMMUv3: Fix "Service Failure Mode" handling
- SMMUv2: New Qualcomm compatible string
- Removal of the AMD IOMMU performance counter writeable check
on AMD. It caused long boot delays on some machines and is
only needed to work around an errata on some older (possibly
pre-production) chips. If someone is still hit by this
hardware issue anyway the performance counters will just
return 0.
- Support for targeted invalidations in the AMD IOMMU driver.
Before that the driver only invalidated a single 4k page or the
whole IO/TLB for an address space. This has been extended now
and is mostly useful for emulated AMD IOMMUs.
- Several fixes for the Shared Virtual Memory support in the
Intel VT-d driver
- Mediatek drivers can now be built as modules
- Re-introduction of the forcedac boot option which got lost
when converting the Intel VT-d driver to the common dma-iommu
implementation.
- Extension of the IOMMU device registration interface and
support iommu_ops to be const again when drivers are built as
modules.
-----BEGIN PGP SIGNATURE-----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=qF2C
-----END PGP SIGNATURE-----
Merge tag 'iommu-updates-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull iommu updates from Joerg Roedel:
- Big cleanup of almost unsused parts of the IOMMU API by Christoph
Hellwig. This mostly affects the Freescale PAMU driver.
- New IOMMU driver for Unisoc SOCs
- ARM SMMU Updates from Will:
- Drop vestigial PREFETCH_ADDR support (SMMUv3)
- Elide TLB sync logic for empty gather (SMMUv3)
- Fix "Service Failure Mode" handling (SMMUv3)
- New Qualcomm compatible string (SMMUv2)
- Removal of the AMD IOMMU performance counter writeable check on AMD.
It caused long boot delays on some machines and is only needed to
work around an errata on some older (possibly pre-production) chips.
If someone is still hit by this hardware issue anyway the performance
counters will just return 0.
- Support for targeted invalidations in the AMD IOMMU driver. Before
that the driver only invalidated a single 4k page or the whole IO/TLB
for an address space. This has been extended now and is mostly useful
for emulated AMD IOMMUs.
- Several fixes for the Shared Virtual Memory support in the Intel VT-d
driver
- Mediatek drivers can now be built as modules
- Re-introduction of the forcedac boot option which got lost when
converting the Intel VT-d driver to the common dma-iommu
implementation.
- Extension of the IOMMU device registration interface and support
iommu_ops to be const again when drivers are built as modules.
* tag 'iommu-updates-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (84 commits)
iommu: Streamline registration interface
iommu: Statically set module owner
iommu/mediatek-v1: Add error handle for mtk_iommu_probe
iommu/mediatek-v1: Avoid build fail when build as module
iommu/mediatek: Always enable the clk on resume
iommu/fsl-pamu: Fix uninitialized variable warning
iommu/vt-d: Force to flush iotlb before creating superpage
iommu/amd: Put newline after closing bracket in warning
iommu/vt-d: Fix an error handling path in 'intel_prepare_irq_remapping()'
iommu/vt-d: Fix build error of pasid_enable_wpe() with !X86
iommu/amd: Remove performance counter pre-initialization test
Revert "iommu/amd: Fix performance counter initialization"
iommu/amd: Remove duplicate check of devid
iommu/exynos: Remove unneeded local variable initialization
iommu/amd: Page-specific invalidations for more than one page
iommu/arm-smmu-v3: Remove the unused fields for PREFETCH_CONFIG command
iommu/vt-d: Avoid unnecessary cache flush in pasid entry teardown
iommu/vt-d: Invalidate PASID cache when root/context entry changed
iommu/vt-d: Remove WO permissions on second-level paging entries
iommu/vt-d: Report the right page fault address
...
|
||
|
Linus Torvalds
|
f34b2cf178 |
RDMA merge window pull request
This is significantly bug fixes and general cleanups. The noteworthy new
features are fairly small:
- XRC support for HNS and improves RQ operations
- Bug fixes and updates for hns, mlx5, bnxt_re, hfi1, i40iw, rxe, siw and
qib
- Quite a few general cleanups on spelling, error handling, static checker
detections, etc
- Increase the number of device ports supported beyond 255. High port
count software switches now exist
- Several bug fixes for rtrs
- mlx5 Device Memory support for host controlled atomics
- Report SRQ tables through to rdma-tool
-----BEGIN PGP SIGNATURE-----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=vsXA
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"This is significantly bug fixes and general cleanups. The noteworthy
new features are fairly small:
- XRC support for HNS and improves RQ operations
- Bug fixes and updates for hns, mlx5, bnxt_re, hfi1, i40iw, rxe, siw
and qib
- Quite a few general cleanups on spelling, error handling, static
checker detections, etc
- Increase the number of device ports supported beyond 255. High port
count software switches now exist
- Several bug fixes for rtrs
- mlx5 Device Memory support for host controlled atomics
- Report SRQ tables through to rdma-tool"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (145 commits)
IB/qib: Remove redundant assignment to ret
RDMA/nldev: Add copy-on-fork attribute to get sys command
RDMA/bnxt_re: Fix a double free in bnxt_qplib_alloc_res
RDMA/siw: Fix a use after free in siw_alloc_mr
IB/hfi1: Remove redundant variable rcd
RDMA/nldev: Add QP numbers to SRQ information
RDMA/nldev: Return SRQ information
RDMA/restrack: Add support to get resource tracking for SRQ
RDMA/nldev: Return context information
RDMA/core: Add CM to restrack after successful attachment to a device
RDMA/cma: Skip device which doesn't support CM
RDMA/rxe: Fix a bug in rxe_fill_ip_info()
RDMA/mlx5: Expose private query port
RDMA/mlx4: Remove an unused variable
RDMA/mlx5: Fix type assignment for ICM DM
IB/mlx5: Set right RoCE l3 type and roce version while deleting GID
RDMA/i40iw: Fix error unwinding when i40iw_hmc_sd_one fails
RDMA/cxgb4: add missing qpid increment
IB/ipoib: Remove unnecessary struct declaration
RDMA/bnxt_re: Get rid of custom module reference counting
...
|
||
|
Linus Torvalds
|
9f67672a81 |
New features for ext4 this cycle include support for encrypted
casefold, ensure that deleted file names are cleared in directory blocks by zeroing directory entries when they are unlinked or moved as part of a hash tree node split. We also improve the block allocator's performance on a freshly mounted file system by prefetching block bitmaps. There are also the usual cleanups and bug fixes, including fixing a page cache invalidation race when there is mixed buffered and direct I/O and the block size is less than page size, and allow the dax flag to be set and cleared on inline directories. -----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmCLei4ACgkQ8vlZVpUN gaPZkgf/VH08xjMf3VthC+BpvVmChQXfV4yjigHbO2pmPyYWZhyJzkEGCQD8u2eB b7ShW+B1NCifcTU34xAkKHwEtakzzEv3WIMrT1oZNWrpfo8tt850EkwQggaGGDpd /HnP1/wLtziJ5hE6DwutmX7qB4VFghVj898MjDrEPSOBqItOjWps9mn/JWL7SHyI Dqzhf5XZTYPaXWuJmSmKw3q8O70JDHnZe/rRWlfX1jLI5KDtqp71Nw1B+gszUB66 IUdncyZKvInsyjYhkbCQ8U6WFih82MrbKeuGYDp/RFvg5eMELEYkwT9j0ofuDHq8 zn62sAlbOXv1DiqkPDHKVm9GkHx8/g== =UpnH -----END PGP SIGNATURE----- Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 updates from Ted Ts'o: "New features for ext4 this cycle include support for encrypted casefold, ensure that deleted file names are cleared in directory blocks by zeroing directory entries when they are unlinked or moved as part of a hash tree node split. We also improve the block allocator's performance on a freshly mounted file system by prefetching block bitmaps. There are also the usual cleanups and bug fixes, including fixing a page cache invalidation race when there is mixed buffered and direct I/O and the block size is less than page size, and allow the dax flag to be set and cleared on inline directories" * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (32 commits) ext4: wipe ext4_dir_entry2 upon file deletion ext4: Fix occasional generic/418 failure fs: fix reporting supported extra file attributes for statx() ext4: allow the dax flag to be set and cleared on inline directories ext4: fix debug format string warning ext4: fix trailing whitespace ext4: fix various seppling typos ext4: fix error return code in ext4_fc_perform_commit() ext4: annotate data race in jbd2_journal_dirty_metadata() ext4: annotate data race in start_this_handle() ext4: fix ext4_error_err save negative errno into superblock ext4: fix error code in ext4_commit_super ext4: always panic when errors=panic is specified ext4: delete redundant uptodate check for buffer ext4: do not set SB_ACTIVE in ext4_orphan_cleanup() ext4: make prefetch_block_bitmaps default ext4: add proc files to monitor new structures ext4: improve cr 0 / cr 1 group scanning ext4: add MB_NUM_ORDERS macro ext4: add mballoc stats proc file ... |
||
|
Linus Torvalds
|
6bab076a3d |
dlm for 5.13
This set includes more dlm networking cleanups and improvements for making dlm shutdowns more robust. -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJgjC8hAAoJEDgbc8f8gGmqf2kP/AgQEu1T1OKoJ8K0hEi4Axsn CIn09+Sb+mVnEa5LHGESw7WbsoodalMnn7D1GExpTXRy015d/SQjBdG9oWuWYnWO ouo/ElHAAtU4XCLcGIFYwv7vgUY+ag6Nc2yAvkIpETBKiCl6IHkoIwz1+B+Qgboo DOiu3iCYaPB3w13guMETDFZTrzM29k0VTnEgnGVSCKznm1gHUo7WuB17xyKOVFiY Y3KkzjqD+NOqtbXlTIEIBQ2PRD2pX1hroto5Qi85/HM/W/yieNYjIM51+kjX5SVy VJB/9JpVP/819TDuHPz3xHSxgXgXePWstuAH1WruUfoB4iLx0Fw2WI3snld2VFBn 5fFZ1+F/YnBQZ4ElQ6E1YciQLQM8SEA7vCgBpNYkWe+3DFvoKKeYNZEO2lTGtvnr EYcie8epQKj6eddLbW/hYvO44vhlcp8lV0AwT1mSCHHKn/8GbNB6kk1gW4PIxOqm 1PQ4Z5VBrxnxxoPD2wIZbmqIgPXKZIxg93SrR0RYyJbjoSgGz45n6I3dLwR5KUNE 9PQfx/UhmyVqE7UELdarb0hDaPXXzhh+T0LH6YHtihmAhfCA/dhiOYUhkWNtXCkE sQwWQq17xnC5juH/vp2ispBnSjUJq1kdVnN4l1RGkMNaSeVZeORH0A8jMwYE3vsK A6KMaBkfBpvuiY7UHCcK =0iOq -----END PGP SIGNATURE----- Merge tag 'dlm-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm Pull dlm updates from David Teigland: "This includes more dlm networking cleanups and improvements for making dlm shutdowns more robust" * tag 'dlm-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: fs: dlm: fix missing unlock on error in accept_from_sock() fs: dlm: add shutdown hook fs: dlm: flush swork on shutdown fs: dlm: remove unaligned memory access handling fs: dlm: check on minimum msglen size fs: dlm: simplify writequeue handling fs: dlm: use GFP_ZERO for page buffer fs: dlm: change allocation limits fs: dlm: add check if dlm is currently running fs: dlm: add errno handling to check callback fs: dlm: set subclass for othercon sock_mutex fs: dlm: set connected bit after accept fs: dlm: fix mark setting deadlock fs: dlm: fix debugfs dump |
||
|
Linus Torvalds
|
9ec1efbf9d |
fuse update for 5.13
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCYIwY/wAKCRDh3BK/laaZ PNSmAPwLFCBGegvwxUSguiPmIXpDrrlG+USwTzGlxhVOg2ETGgEA6D+Lsz2uCBI3 xLkPAXD6uTbWLp13YtUSMXK+LR8V5wc= =Fl+Q -----END PGP SIGNATURE----- Merge tag 'fuse-update-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse updates from Miklos Szeredi: - Fix a page locking bug in write (introduced in 2.6.26) - Allow sgid bit to be killed in setacl() - Miscellaneous fixes and cleanups * tag 'fuse-update-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: cuse: simplify refcount cuse: prevent clone virtiofs: fix userns virtiofs: remove useless function virtiofs: split requests that exceed virtqueue size virtiofs: fix memory leak in virtio_fs_probe() fuse: invalidate attrs when page writeback completes fuse: add a flag FUSE_SETXATTR_ACL_KILL_SGID to kill SGID fuse: extend FUSE_SETXATTR request fuse: fix matching of FUSE_DEV_IOC_CLONE command fuse: fix a typo fuse: don't zero pages twice fuse: fix typo for fuse_conn.max_pages comment fuse: fix write deadlock |
||
|
Linus Torvalds
|
d652502ef4 |
overlayfs update for 5.13
-----BEGIN PGP SIGNATURE----- iHUEABYIAB0WIQSQHSd0lITzzeNWNm3h3BK/laaZPAUCYIwTsgAKCRDh3BK/laaZ PDktAP41eScbCiFzXDRjXw9S7Wfd8HEct0y1p+9BUh8m3VdHfwEA0pDlJWNaJdYW nFixPJ5GsAfxo+1ags0vn06CUS/K4gA= =QlbJ -----END PGP SIGNATURE----- Merge tag 'ovl-update-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs Pull overlayfs update from Miklos Szeredi: - Fix a regression introduced in 5.2 that resulted in valid overlayfs mounts being rejected with ELOOP (Too many levels of symbolic links) - Fix bugs found by various tools - Miscellaneous improvements and cleanups * tag 'ovl-update-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ovl: add debug print to ovl_do_getxattr() ovl: invalidate readdir cache on changes to dir with origin ovl: allow upperdir inside lowerdir ovl: show "userxattr" in the mount data ovl: trivial typo fixes in the file inode.c ovl: fix misspellings using codespell tool ovl: do not copy attr several times ovl: remove ovl_map_dev_ino() return value ovl: fix error for ovl_fill_super() ovl: fix missing revert_creds() on error path ovl: fix leaked dentry ovl: restrict lower null uuid for "xino=auto" ovl: check that upperdir path is not on a read-only mount ovl: plumb through flush method |
||
|
Linus Torvalds
|
d42f323a7d |
Merge branch 'akpm' (patches from Andrew)
Merge misc updates from Andrew Morton: "A few misc subsystems and some of MM. 175 patches. Subsystems affected by this patch series: ia64, kbuild, scripts, sh, ocfs2, kfifo, vfs, kernel/watchdog, and mm (slab-generic, slub, kmemleak, debug, pagecache, msync, gup, memremap, memcg, pagemap, mremap, dma, sparsemem, vmalloc, documentation, kasan, initialization, pagealloc, and memory-failure)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (175 commits) mm/memory-failure: unnecessary amount of unmapping mm/mmzone.h: fix existing kernel-doc comments and link them to core-api mm: page_alloc: ignore init_on_free=1 for debug_pagealloc=1 net: page_pool: use alloc_pages_bulk in refill code path net: page_pool: refactor dma_map into own function page_pool_dma_map SUNRPC: refresh rq_pages using a bulk page allocator SUNRPC: set rq_page_end differently mm/page_alloc: inline __rmqueue_pcplist mm/page_alloc: optimize code layout for __alloc_pages_bulk mm/page_alloc: add an array-based interface to the bulk page allocator mm/page_alloc: add a bulk page allocator mm/page_alloc: rename alloced to allocated mm/page_alloc: duplicate include linux/vmalloc.h mm, page_alloc: avoid page_to_pfn() in move_freepages() mm/Kconfig: remove default DISCONTIGMEM_MANUAL mm: page_alloc: dump migrate-failed pages mm/mempolicy: fix mpol_misplaced kernel-doc mm/mempolicy: rewrite alloc_pages_vma documentation mm/mempolicy: rewrite alloc_pages documentation mm/mempolicy: rename alloc_pages_current to alloc_pages ... |
||
|
Linus Torvalds
|
65ec0a7d24 |
This is the bulk of the pin control changes for the v5.13 kernel cycle
Core changes:
- A semantic change to handle pinmux and pinconf in explicit order
while up until now we depended on the semantic order in the
device tree. The device tree is a functional programming
language and does not imply any order, so the right thing is
for the pin control core to provide these semantics.
- Add a new pinmux-select debugfs file which makes it possible to
go in and select functions for a pin manually (iteratively, at
the prompt) for debugging purposes.
- Fixes to gpio regmap handling for a new pin control driver
making use of regmap-gpio.
- Use octal permissions on debugfs files.
New drivers:
- A massive rewrite of the former custom pin control driver for
MIPS Broadcom devices to instead use the pin control subsystem.
New pin control drivers for BCM6345, BCM6328, BCM6358, BCM6362,
BCM6368, BCM63268 and BCM6318 SoC variants are implemented.
- Support for PM8350, PM8350B, PM8350C, PMK8350, PMR735A and
PMR735B in the Qualcomm PMIC GPIO driver. Also the two GPIOs
on PM8008 are supported.
- Support for the Rockchip RK3568/RK3566 pin controller.
- Support for Ingenic JZ4730, JZ4750, JZ4755, JZ4775 and
X2000.
- Support for Mediatek MTK8195.
- Add a new Xilinx ZynqMP pin control driver.
Driver improvements and non-urgent fixes:
- Modularization and improvements of the Rockchip drivers.
- Some new pins added to the description of new Renesas SoCs.
- Clarifications of the GPIO base calculation in the Intel driver.
- Fix the function names for the MPP54 and MPP55 pins in the Armada
CP110 pin controller.
- GPIO wakeup interrupt map for Qualcomm SC7280 and SM8350.
- Support for ACPI probing of the Qualcomm SC8180x.
- Fix interrupt clear status on rockchip
- Fix some missing pins on the Ingenic JZ4770, some semantic
fixes for the behaviour of the Ingenic pin controller.
Add DMIC pins for JZ4780, X1000, X1500 and X1830.
- A slew of janitorial like of_node_put() calls.
-----BEGIN PGP SIGNATURE-----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=QrEn
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"There is a lot going on!
Core changes:
- A semantic change to handle pinmux and pinconf in explicit order
while up until now we depended on the semantic order in the device
tree. The device tree is a functional programming language and does
not imply any order, so the right thing is for the pin control core
to provide these semantics.
- Add a new pinmux-select debugfs file which makes it possible to go
in and select functions for a pin manually (iteratively, at the
prompt) for debugging purposes.
- Fixes to gpio regmap handling for a new pin control driver making
use of regmap-gpio.
- Use octal permissions on debugfs files.
New drivers:
- A massive rewrite of the former custom pin control driver for MIPS
Broadcom devices to instead use the pin control subsystem. New pin
control drivers for BCM6345, BCM6328, BCM6358, BCM6362, BCM6368,
BCM63268 and BCM6318 SoC variants are implemented.
- Support for PM8350, PM8350B, PM8350C, PMK8350, PMR735A and PMR735B
in the Qualcomm PMIC GPIO driver. Also the two GPIOs on PM8008 are
supported.
- Support for the Rockchip RK3568/RK3566 pin controller.
- Support for Ingenic JZ4730, JZ4750, JZ4755, JZ4775 and X2000.
- Support for Mediatek MTK8195.
- Add a new Xilinx ZynqMP pin control driver.
Driver improvements and non-urgent fixes:
- Modularization and improvements of the Rockchip drivers.
- Some new pins added to the description of new Renesas SoCs.
- Clarifications of the GPIO base calculation in the Intel driver.
- Fix the function names for the MPP54 and MPP55 pins in the Armada
CP110 pin controller.
- GPIO wakeup interrupt map for Qualcomm SC7280 and SM8350.
- Support for ACPI probing of the Qualcomm SC8180x.
- Fix interrupt clear status on rockchip
- Fix some missing pins on the Ingenic JZ4770, some semantic fixes
for the behaviour of the Ingenic pin controller. Add DMIC pins for
JZ4780, X1000, X1500 and X1830.
- A slew of janitorial like of_node_put() calls"
* tag 'pinctrl-v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (99 commits)
pinctrl: Add Xilinx ZynqMP pinctrl driver support
firmware: xilinx: Add pinctrl support
pinctrl: rockchip: do coding style for mux route struct
pinctrl: Add PIN_CONFIG_MODE_PWM to enum pin_config_param
pinctrl: Introduce MODE group in enum pin_config_param
pinctrl: Keep enum pin_config_param ordered by name
dt-bindings: pinctrl: Add binding for ZynqMP pinctrl driver
pinctrl: core: Fix kernel doc string for pin_get_name()
pinctrl: mediatek: use spin lock in mtk_rmw
pinctrl: add drive for I2C related pins on MT8195
pinctrl: add pinctrl driver on mt8195
dt-bindings: pinctrl: mt8195: add pinctrl file and binding document
pinctrl: Ingenic: Add pinctrl driver for X2000.
pinctrl: Ingenic: Add pinctrl driver for JZ4775.
pinctrl: Ingenic: Add pinctrl driver for JZ4755.
pinctrl: Ingenic: Add pinctrl driver for JZ4750.
pinctrl: Ingenic: Add pinctrl driver for JZ4730.
dt-bindings: pinctrl: Add bindings for new Ingenic SoCs.
pinctrl: Ingenic: Reformat the code.
pinctrl: Ingenic: Add DMIC pins support for Ingenic SoCs.
...
|
||
|
Linus Torvalds
|
592fa9532d |
Merge branch 'i2c/for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang: - new drivers for Silicon Labs CP2615 and the HiSilicon I2C unit - bigger refactoring for the MPC driver - support for full software nodes - no need to work around with only properties anymore - we now have 'devm_i2c_add_adapter', too - sub-system wide fixes for the RPM refcounting problem which often caused a leak when an error was encountered during probe - the rest is usual driver updates and improvements * 'i2c/for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (77 commits) i2c: mediatek: Use scl_int_delay_ns to compensate clock-stretching i2c: mediatek: Fix wrong dma sync flag i2c: mediatek: Fix send master code at more than 1MHz i2c: sh7760: fix IRQ error path i2c: i801: Add support for Intel Alder Lake PCH-M i2c: core: Fix spacing error by checkpatch i2c: s3c2410: simplify getting of_device_id match data i2c: nomadik: Fix space errors i2c: iop3xx: Fix coding style issues i2c: amd8111: Fix coding style issues i2c: mpc: Drop duplicate message from devm_platform_ioremap_resource() i2c: mpc: Use device_get_match_data() helper i2c: mpc: Remove CONFIG_PM_SLEEP ifdeffery i2c: mpc: Use devm_clk_get_optional() i2c: mpc: Update license and copyright i2c: mpc: Interrupt driven transfer i2c: sh7760: add IRQ check i2c: rcar: add IRQ check i2c: mlxbf: add IRQ check i2c: jz4780: add IRQ check ... |
||
|
Linus Torvalds
|
efd8929b9e |
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina: - Surface Aggregator Module support from Maximilian Luz - Apple Magic Mouse 2 support from John Chen - Support for newer Quad/BT 2.0 Logitech receivers in HID proxy mode from Hans de Goede - Thinkpad X1 Tablet keyboard support from Hans de Goede - Support for FTDI FT260 I2C host adapter from Michael Zaidman - other various small device-specific quirks, fixes and cleanups * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (46 commits) HID: wacom: Setup pen input capabilities to the targeted tools HID: hid-sensor-hub: Move 'hsdev' description to correct struct definition HID: hid-sensor-hub: Remove unused struct member 'quirks' HID: wacom_sys: Demote kernel-doc abuse HID: hid-sensor-custom: Remove unused variable 'ret' HID: hid-uclogic-params: Ensure function names are present and correct in kernel-doc headers HID: hid-uclogic-rdesc: Kernel-doc is for functions and structs HID: hid-logitech-hidpp: Fix conformant kernel-doc header and demote abuses HID: hid-picolcd_core: Remove unused variable 'ret' HID: hid-kye: Fix incorrect function name for kye_tablet_enable() HID: hid-core: Fix incorrect function name in header HID: hid-alps: Correct struct misnaming HID: usbhid: hid-pidff: Demote a couple kernel-doc abuses HID: usbhid: Repair a formatting issue in a struct description HID: hid-thrustmaster: Demote a bunch of kernel-doc abuses HID: input: map battery capacity (00850065) HID: magicmouse: fix reconnection of Magic Mouse 2 HID: magicmouse: fix 3 button emulation of Mouse 2 HID: magicmouse: add Apple Magic Mouse 2 support HID: lenovo: Add support for Thinkpad X1 Tablet Thin keyboard ... |
||
|
Linus Torvalds
|
b71428d7ab |
sound updates for 5.13
No surprises in this development cycle, and most of works are about
the fixes and the improvements of the existing code, while a new LED
control layer and a few new drivers have been introduced.
Here are some highlights:
Core:
- A common mute-LED framework was introduced;
used by HD-audio for now, more adaption will follow later.
The former "Mic Mute-LED Mode" mixer control has been replaced with
the corresponding sysfs now.
- User-control management was changed to count consumed bytes instead
of capping by number of elements;
this will allow more controls in the normal usage pattern while
avoiding the possible memory exhaustion DoS
ASoC:
- Continued refactoring and cleanups in ASoC core and generic card
drivers
- Wide range of small cppcheck and warning fixes
- New drivers for Freescale i.MX DMA over rpmsg, Mediatek MT6358
accessory detection, and Realtek RT1019, RT1316, RT711 and RT715
USB-audio:
- Continued improvements and fixes of the implicit feedback mode,
including better support for Pioneer and Roland/BOSS devices
HD-audio:
- Default back to non-buffer preallocation on x86
- Cirrus codec improvements, more quirks for Realtek codecs
Others:
- New virtio sound driver
- FireWire Bebob updates
Note that this PR includes a couple of changes in reset and SPI
drivers, too, and some merge conflicts might happen.
-----BEGIN PGP SIGNATURE-----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=YT3U
-----END PGP SIGNATURE-----
Merge tag 'sound-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"No surprises in this development cycle, and most of work is about the
fixes and the improvements of the existing code, while a new LED
control layer and a few new drivers have been introduced.
Here are some highlights:
Core:
- A common mute-LED framework was introduced. It is used by HD-audio
for now, more adaption will follow later. The former "Mic Mute-LED
Mode" mixer control has been replaced with the corresponding sysfs
now.
- User-control management was changed to count consumed bytes instead
of capping by number of elements; this will allow more controls in
the normal usage pattern while avoiding the possible memory
exhaustion DoS
ASoC:
- Continued refactoring and cleanups in ASoC core and generic card
drivers
- Wide range of small cppcheck and warning fixes
- New drivers for Freescale i.MX DMA over rpmsg, Mediatek MT6358
accessory detection, and Realtek RT1019, RT1316, RT711 and RT715
USB-audio:
- Continued improvements and fixes of the implicit feedback mode,
including better support for Pioneer and Roland/BOSS devices
HD-audio:
- Default back to non-buffer preallocation on x86
- Cirrus codec improvements, more quirks for Realtek codecs
Others:
- New virtio sound driver
- FireWire Bebob updates"
* tag 'sound-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (587 commits)
ALSA: hda/conexant: Re-order CX5066 quirk table entries
ALSA: hda/realtek: Remove redundant entry for ALC861 Haier/Uniwill devices
ALSA: hda/realtek: Re-order ALC662 quirk table entries
ALSA: hda/realtek: Re-order remaining ALC269 quirk table entries
ALSA: hda/realtek: Re-order ALC269 Lenovo quirk table entries
ALSA: hda/realtek: Re-order ALC269 Sony quirk table entries
ALSA: hda/realtek: Re-order ALC269 ASUS quirk table entries
ALSA: hda/realtek: Re-order ALC269 Dell quirk table entries
ALSA: hda/realtek: Re-order ALC269 Acer quirk table entries
ALSA: hda/realtek: Re-order ALC269 HP quirk table entries
ALSA: hda/realtek: Re-order ALC882 Clevo quirk table entries
ALSA: hda/realtek: Re-order ALC882 Sony quirk table entries
ALSA: hda/realtek: Re-order ALC882 Acer quirk table entries
ALSA: usb-audio: Remove redundant assignment to len
ALSA: hda/realtek: Add quirk for Intel Clevo PCx0Dx
ALSA: virtio: fix kernel-doc
ALSA: hda/cirrus: Use CS8409 filter to fix abnormal sounds on Bullseye
ALSA: hda/cirrus: Set Initial DMIC volume for Bullseye to -26 dB
ALSA: sb: Fix two use after free in snd_sb_qsound_build
ALSA: emu8000: Fix a use after free in snd_emu8000_create_mixer
...
|
||
|
Linus Torvalds
|
95275402f6 |
drm tegra-next + fixes for 5.13-rc1
tegra: - Tegra186 hardware cursor support - better capability reporting for different SoC - better framebuffer modifier support - host1x fixes ttm: - fix unswappable BO handling efifb: - check for PCI before using it amdgpu: - Fixes for Aldebaran - Display LTTPR fixes - eDP fixes - Fixes for Vangogh - RAS fixes - ASPM support - Renoir SMU fixes - Modifier fixes - Misc code cleanups - Freesync fixes i915: - Several fixes to GLK handling in recent display refactoring - Rare watchdog timer race fix - Cppcheck redundant condition fix - Overlay error code propagation fix - Documentation fix - gvt: Remove one unused function warning - gvt: Fix intel_gvt_init_device() return type - gvt: Remove one duplicated register accessible check -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJgi1hjAAoJEAx081l5xIa+ydkP/1Etl4S07UiLkWtHNOl5lj33 RCCfjjeqTc5Md2qXuCknEsju38P493Pqhh1j7Nl02QHE1pIyTEjhKTdv/zt7aC0R jVUw4ZvtkqN2U1azS8Wfa+YBqrkerrdGIvaIJa/s9eLN+r+/Vb7Crid5NJg5/RQL NLN2Riw95MrvrsGFnZRli8qiLbIK2pj3553KZWJim4o9Fp+1TAesXVLI1+qXoIRk WWLuhwLxPLSb+ONCbrcOFSAwxVZLwRM90B+jwnhRYLS/Zo1hcWhn9ua5RBdyC5zU rGuOA6dWmI4o4L0X+IaNLD4qOGAWTp1dnJtvKj4rQVfSR82hWcTlCnVcZgxjjydx m56TlBLGYvilClM5tmRUdW5QKW4c9DP7dAr3XiKyYOuL2pRkg904ziQs4fVwmOgV PfDNm/aA+40UKPwLu0+JM7aQO5OgL8pg1FpOck5qOIx9fAQrulPp9OHDbxXVAzax t6YmmBnlXShZSooEkwfoCILkdZuNwmj1sXwUh3QzeQj6owk4tg+LWJIqK9mHt+lQ YuyueS+hOn1uSzhtLs9QdQvNssLVd490i0tyU/GGNMw/QVyi9gg4Iq2dVk00L9if lFQ7PgPslT+ExIdVutsnuLsy9N2by0AcxFJLdYKELTTicTVhYKzArGeCxni/A35r 7ZmtSPvbuY7g1//n03Nb =4Wh+ -----END PGP SIGNATURE----- Merge tag 'drm-next-2021-04-30' of git://anongit.freedesktop.org/drm/drm Pull more drm updates from Dave Airlie: "Looks like I missed a tegra feature request for next, but should still be fine since it's pretty self contained. Apart from that got a set of i915 and amdgpu fixes as per usual along with a few misc fixes. tegra: - Tegra186 hardware cursor support - better capability reporting for different SoC - better framebuffer modifier support - host1x fixes ttm: - fix unswappable BO handling efifb: - check for PCI before using it amdgpu: - Fixes for Aldebaran - Display LTTPR fixes - eDP fixes - Fixes for Vangogh - RAS fixes - ASPM support - Renoir SMU fixes - Modifier fixes - Misc code cleanups - Freesync fixes i915: - Several fixes to GLK handling in recent display refactoring - Rare watchdog timer race fix - Cppcheck redundant condition fix - Overlay error code propagation fix - Documentation fix - gvt: Remove one unused function warning - gvt: Fix intel_gvt_init_device() return type - gvt: Remove one duplicated register accessible check" * tag 'drm-next-2021-04-30' of git://anongit.freedesktop.org/drm/drm: (111 commits) efifb: Check efifb_pci_dev before using it drm/i915: Fix docbook descriptions for i915_gem_shrinker drm/i915: fix an error code in intel_overlay_do_put_image() drm/i915/display/psr: Fix cppcheck warnings drm/i915: Disable LTTPR detection on GLK once again drm/i915: Restore lost glk ccs w/a drm/i915: Restore lost glk FBC 16bpp w/a drm/i915: Take request reference before arming the watchdog timer drm/ttm: fix error handling if no BO can be swapped out v4 drm/i915/gvt: Remove duplicated register accessible check drm/amdgpu/gmc9: remove dummy read workaround for newer chips drm/amdgpu: Add mem sync flag for IB allocated by SA drm/amdgpu: Fix SDMA RAS error reporting on Aldebaran drm/amdgpu: Reset RAS error count and status regs Revert "drm/amdgpu: workaround the TMR MC address issue (v2)" drm/amd/display: 3.2.132 drm/amd/display: [FW Promotion] Release 0.0.62 drm/amd/display: add helper for enabling mst stream features drm/amd/display: Report Proper Quantization Range in AVI Infoframe drm/amd/display: Fix call to pass bpp in 16ths of a bit ... |
||
|
Linus Torvalds
|
65c61de9d0 |
Summary of modules changes for the 5.13 merge window:
- Fix an age old bug involving jump_calls and static_labels when
CONFIG_MODULE_UNLOAD=n. When CONFIG_MODULE_UNLOAD=n, it means you
can't unload modules, so normally the __exit sections of a module are
not loaded at all. However, dynamic code patching (jump_label,
static_call, alternatives) can have sites in __exit sections even if
__exit is never executed.
Reported by Peter Zijlstra: "Alternatives, jump_labels and static_call
all can have relocations into __exit code. Not loading it at all would
be BAD." Therefore, load the __exit sections even when
CONFIG_MODULE_UNLOAD=n, and discard them after init.
Signed-off-by: Jessica Yu <jeyu@kernel.org>
-----BEGIN PGP SIGNATURE-----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=zme0
-----END PGP SIGNATURE-----
Merge tag 'modules-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module updates from Jessica Yu:
"Fix an age old bug involving jump_calls and static_labels when
CONFIG_MODULE_UNLOAD=n.
When CONFIG_MODULE_UNLOAD=n, it means you can't unload modules, so
normally the __exit sections of a module are not loaded at all.
However, dynamic code patching (jump_label, static_call, alternatives)
can have sites in __exit sections even if __exit is never executed.
Reported by Peter Zijlstra:
'Alternatives, jump_labels and static_call all can have relocations
into __exit code. Not loading it at all would be BAD.'
Therefore, load the __exit sections even when CONFIG_MODULE_UNLOAD=n,
and discard them after init"
* tag 'modules-for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
module: treat exit sections the same as init sections when !CONFIG_MODULE_UNLOAD
|
||
|
Linus Torvalds
|
c70a4be130 |
powerpc updates for 5.13
- Enable KFENCE for 32-bit. - Implement EBPF for 32-bit. - Convert 32-bit to do interrupt entry/exit in C. - Convert 64-bit BookE to do interrupt entry/exit in C. - Changes to our signal handling code to use user_access_begin/end() more extensively. - Add support for time namespaces (CONFIG_TIME_NS) - A series of fixes that allow us to reenable STRICT_KERNEL_RWX. - Other smaller features, fixes & cleanups. Thanks to: Alexey Kardashevskiy, Andreas Schwab, Andrew Donnellan, Aneesh Kumar K.V, Athira Rajeev, Bhaskar Chowdhury, Bixuan Cui, Cédric Le Goater, Chen Huang, Chris Packham, Christophe Leroy, Christopher M. Riedl, Colin Ian King, Dan Carpenter, Daniel Axtens, Daniel Henrique Barboza, David Gibson, Davidlohr Bueso, Denis Efremov, dingsenjie, Dmitry Safonov, Dominic DeMarco, Fabiano Rosas, Ganesh Goudar, Geert Uytterhoeven, Geetika Moolchandani, Greg Kurz, Guenter Roeck, Haren Myneni, He Ying, Jiapeng Chong, Jordan Niethe, Laurent Dufour, Lee Jones, Leonardo Bras, Li Huafei, Madhavan Srinivasan, Mahesh Salgaonkar, Masahiro Yamada, Nathan Chancellor, Nathan Lynch, Nicholas Piggin, Oliver O'Halloran, Paul Menzel, Pu Lehui, Randy Dunlap, Ravi Bangoria, Rosen Penev, Russell Currey, Santosh Sivaraj, Sebastian Andrzej Siewior, Segher Boessenkool, Shivaprasad G Bhat, Srikar Dronamraju, Stephen Rothwell, Thadeu Lima de Souza Cascardo, Thomas Gleixner, Tony Ambardar, Tyrel Datwyler, Vaibhav Jain, Vincenzo Frascino, Xiongwei Song, Yang Li, Yu Kuai, Zhang Yunkai. -----BEGIN PGP SIGNATURE----- iQJHBAABCAAxFiEEJFGtCPCthwEv2Y/bUevqPMjhpYAFAmCLV1kTHG1wZUBlbGxl cm1hbi5pZC5hdQAKCRBR6+o8yOGlgLUyD/4jrTolG4sVec211hYO+0VuJzoqN4Cf j2CA2Ju39butnSMiq4LJUPRB7QRZY1OofkoNFpZeDQspjfZXPz2ulpYAz+SxHWE2 ReHPmWH1rOABlUPXFboePF4OLwmAs9eR5mN2z9HpKXbT3k78HaToLqiONyB4fVCr Q5TkJeRn/Y7ZJLdyPLTpczHHleQ8KoM6kT7ncXnTm6p97JOBJSrGaJ5N/8X5a4+e 6jtgB7Pvw8jNDShSr8BDLBgBZZcmoTiuG8KfgwRZ+m+mKB1yI2X8S/a54w/lDi9g UcSv3jQcFLJuW+T/pYe4R330uWDYa0cwjJOtMmsJ98S4EYOevoe9fZuL97qNshme xtBr4q1i03G1icYOJJ8dXtvabG2rUzj8t1SCDpwYfrynzTWVRikiQYTXUBhRSFoK nsoklvKd2IZa485XYJ2ljSyClMy8S4yJJ9RuzZ94DTXDSJUesKuyRWGnso4mhkcl wvl4wwMTJvnCMKVo6dsJyV24QWfd6dABxzm04uPA94CKhG33UwK8252jXVeaohSb WSO7qWBONgDXQLJ0mXRcEYa9NHvFS4Jnp6APbxnHr1gS+K+PNkD4gPBf34FoyN0E 9s27kvEYk5vr8APUclETF6+FkbGUD5bFbusjt3hYloFpAoHQ/k5pFVDsOZNPA8sW fDIRp05KunDojw== =dfKL -----END PGP SIGNATURE----- Merge tag 'powerpc-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: - Enable KFENCE for 32-bit. - Implement EBPF for 32-bit. - Convert 32-bit to do interrupt entry/exit in C. - Convert 64-bit BookE to do interrupt entry/exit in C. - Changes to our signal handling code to use user_access_begin/end() more extensively. - Add support for time namespaces (CONFIG_TIME_NS) - A series of fixes that allow us to reenable STRICT_KERNEL_RWX. - Other smaller features, fixes & cleanups. Thanks to Alexey Kardashevskiy, Andreas Schwab, Andrew Donnellan, Aneesh Kumar K.V, Athira Rajeev, Bhaskar Chowdhury, Bixuan Cui, Cédric Le Goater, Chen Huang, Chris Packham, Christophe Leroy, Christopher M. Riedl, Colin Ian King, Dan Carpenter, Daniel Axtens, Daniel Henrique Barboza, David Gibson, Davidlohr Bueso, Denis Efremov, dingsenjie, Dmitry Safonov, Dominic DeMarco, Fabiano Rosas, Ganesh Goudar, Geert Uytterhoeven, Geetika Moolchandani, Greg Kurz, Guenter Roeck, Haren Myneni, He Ying, Jiapeng Chong, Jordan Niethe, Laurent Dufour, Lee Jones, Leonardo Bras, Li Huafei, Madhavan Srinivasan, Mahesh Salgaonkar, Masahiro Yamada, Nathan Chancellor, Nathan Lynch, Nicholas Piggin, Oliver O'Halloran, Paul Menzel, Pu Lehui, Randy Dunlap, Ravi Bangoria, Rosen Penev, Russell Currey, Santosh Sivaraj, Sebastian Andrzej Siewior, Segher Boessenkool, Shivaprasad G Bhat, Srikar Dronamraju, Stephen Rothwell, Thadeu Lima de Souza Cascardo, Thomas Gleixner, Tony Ambardar, Tyrel Datwyler, Vaibhav Jain, Vincenzo Frascino, Xiongwei Song, Yang Li, Yu Kuai, and Zhang Yunkai. * tag 'powerpc-5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (302 commits) powerpc/signal32: Fix erroneous SIGSEGV on RT signal return powerpc: Avoid clang uninitialized warning in __get_user_size_allowed powerpc/papr_scm: Mark nvdimm as unarmed if needed during probe powerpc/kvm: Fix build error when PPC_MEM_KEYS/PPC_PSERIES=n powerpc/kasan: Fix shadow start address with modules powerpc/kernel/iommu: Use largepool as a last resort when !largealloc powerpc/kernel/iommu: Align size for IOMMU_PAGE_SIZE() to save TCEs powerpc/44x: fix spelling mistake in Kconfig "varients" -> "variants" powerpc/iommu: Annotate nested lock for lockdep powerpc/iommu: Do not immediately panic when failed IOMMU table allocation powerpc/iommu: Allocate it_map by vmalloc selftests/powerpc: remove unneeded semicolon powerpc/64s: remove unneeded semicolon powerpc/eeh: remove unneeded semicolon powerpc/selftests: Add selftest to test concurrent perf/ptrace events powerpc/selftests/perf-hwbreak: Add testcases for 2nd DAWR powerpc/selftests/perf-hwbreak: Coalesce event creation code powerpc/selftests/ptrace-hwbreak: Add testcases for 2nd DAWR powerpc/configs: Add IBMVNIC to some 64-bit configs selftests/powerpc: Add uaccess flush test ... |
||
|
Linus Torvalds
|
437d1a5b66 |
Xtensa updates for v5.13:
- switch to generic syscall generation scripts - new GDBIO implementation for xtensa semihosting interface - various small code fixes and cleanups - a few typo fixes in comments and Kconfig help text -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEK2eFS5jlMn3N6xfYUfnMkfg/oEQFAmCLCQsTHGpjbXZia2Jj QGdtYWlsLmNvbQAKCRBR+cyR+D+gRFWrD/4ijI7NzdK+u3VmRIwpsq7quG8cYtc8 +x+XLWABAeOx6KagShfIGnjZs0Pvqew2n8De8a/SU1SwstthfDdG4VrPIrCnSXHH vGEaeIkOqkIsEGxYCVzNi2PGxWPlKej0miAXQqxSm+YX2cTcnJt8HEEPPJ39c0vb cy6g1TBeZrf2znqgoQkp2G2bxdh5yMv6Lwmgp4abFZhP87GOps9WJTpJ95DFLwHJ pAO9Cil9+W6mDA31VN34p0ypVePYf+qu5DVCEzo70MEdOwozjh8hHthubqy+UE/5 ywQ90iqHNA1299tYvW8mzsQupPFuofgRhPqFZH50CM9EUTEdjvYi2LAwFEyiYB6R RZekdboSGVBjiTw5nl98EBaFFkmebKNk/QJkG6BYfjYefD9RzYR5J5BdUwc+UH7n tzAWTm49wLKviPbHaTywK63f7gS4X3BIpjy9YqjhezWyg1TPIvgnGBIHYJ8Q56em 8E1dDziuohZNzL6PG0KgrEzUY8DJee1yU41hW6hz/BqWw/xRMHN+F1jFCGqG0Kvn rlTfGmVRBMovcuPkbOxi2TGyB4Bq4kIIlbXlKbpxLzjfh2KFtZLKn6J5YYGguMeo m4F7RdU2Jv1lcAifrZW+IZtvThce5zcv9xhEpFoSWlXY8H+lcNIm933jIXkIjTOi thtjKtwklJdslw== =3fyY -----END PGP SIGNATURE----- Merge tag 'xtensa-20210429' of git://github.com/jcmvbkbc/linux-xtensa Pull Xtensa updates from Max Filippov: - switch to generic syscall generation scripts - new GDBIO implementation for xtensa semihosting interface - various small code fixes and cleanups - a few typo fixes in comments and Kconfig help text * tag 'xtensa-20210429' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: ISS: add GDBIO implementation to semihosting interface xtensa: ISS: split simcall implementation from semihosting interface xtensa: simcall.h: Change compitible to compatible xtensa: Couple of typo fixes xtensa: drop extraneous register load from initialize_mmu xtensa: fix pgprot_noncached assumptions xtensa: simplify coherent_kvaddr logic xtensa: syscalls: switch to generic syscallhdr.sh xtensa: syscalls: switch to generic syscalltbl.sh xtensa: stop filling syscall array with sys_ni_syscall xtensa: remove unneeded export in boot-elf/Makefile xtensa: move CONFIG_CPU_*_ENDIAN defines to Kconfig xtensa: fix warning comparing pointer to 0 xtensa: fix spelling mistake in Kconfig "wont" -> "won't" |
||
Mike Snitzer
|
ca4a4e9a55 |
dm raid: remove unnecessary discard limits for raid0 and raid10
Commit |
||
Jane Chu
|
4d75136be8 |
mm/memory-failure: unnecessary amount of unmapping
It appears that unmap_mapping_range() actually takes a 'size' as its third
argument rather than a location, the current calling fashion causes
unnecessary amount of unmapping to occur.
Link: https://lkml.kernel.org/r/20210420002821.2749748-1-jane.chu@oracle.com
Fixes:
|
||
Mike Rapoport
|
198fba4137 |
mm/mmzone.h: fix existing kernel-doc comments and link them to core-api
There are a couple of kernel-doc comments in include/linux/mmzone.h but they have minor formatting issues that would cause kernel-doc warnings. Fix the formatting of those comments, add missing Return: descriptions and link include/linux/mmzone.h to Documentation/core-api/mm-api.rst Link: https://lkml.kernel.org/r/20210426141927.1314326-2-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Sergei Trofimovich
|
9df65f5225 |
mm: page_alloc: ignore init_on_free=1 for debug_pagealloc=1
On !ARCH_SUPPORTS_DEBUG_PAGEALLOC (like ia64) debug_pagealloc=1 implies
page_poison=on:
if (page_poisoning_enabled() ||
(!IS_ENABLED(CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC) &&
debug_pagealloc_enabled()))
static_branch_enable(&_page_poisoning_enabled);
page_poison=on needs to override init_on_free=1.
Before the change it did not work as expected for the following case:
- have PAGE_POISONING=y
- have page_poison unset
- have !ARCH_SUPPORTS_DEBUG_PAGEALLOC arch (like ia64)
- have init_on_free=1
- have debug_pagealloc=1
That way we get both keys enabled:
- static_branch_enable(&init_on_free);
- static_branch_enable(&_page_poisoning_enabled);
which leads to poisoned pages returned for __GFP_ZERO pages.
After the change we execute only:
- static_branch_enable(&_page_poisoning_enabled);
and ignore init_on_free=1.
Link: https://lkml.kernel.org/r/20210329222555.3077928-1-slyfox@gentoo.org
Link: https://lkml.org/lkml/2021/3/26/443
Fixes:
|
||
Jesper Dangaard Brouer
|
be5dba25b4 |
net: page_pool: use alloc_pages_bulk in refill code path
There are cases where the page_pool need to refill with pages from the page allocator. Some workloads cause the page_pool to release pages instead of recycling these pages. For these workload it can improve performance to bulk alloc pages from the page-allocator to refill the alloc cache. For XDP-redirect workload with 100G mlx5 driver (that use page_pool) redirecting xdp_frame packets into a veth, that does XDP_PASS to create an SKB from the xdp_frame, which then cannot return the page to the page_pool. Performance results under GitHub xdp-project[1]: [1] https://github.com/xdp-project/xdp-project/blob/master/areas/mem/page_pool06_alloc_pages_bulk.org Mel: The patch "net: page_pool: convert to use alloc_pages_bulk_array variant" was squashed with this patch. From the test page, the array variant was superior with one of the test results as follows. Kernel XDP stats CPU pps Delta Baseline XDP-RX CPU total 3,771,046 n/a List XDP-RX CPU total 3,940,242 +4.49% Array XDP-RX CPU total 4,249,224 +12.68% Link: https://lkml.kernel.org/r/20210325114228.27719-10-mgorman@techsingularity.net Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Reviewed-by: Alexander Lobakin <alobakin@pm.me> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: David Miller <davem@davemloft.net> Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Jesper Dangaard Brouer
|
dfa59717b9 |
net: page_pool: refactor dma_map into own function page_pool_dma_map
In preparation for next patch, move the dma mapping into its own function, as this will make it easier to follow the changes. [ilias.apalodimas: make page_pool_dma_map return boolean] Link: https://lkml.kernel.org/r/20210325114228.27719-9-mgorman@techsingularity.net Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Alexander Lobakin <alobakin@pm.me> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: David Miller <davem@davemloft.net> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Chuck Lever
|
f6e70aab9d |
SUNRPC: refresh rq_pages using a bulk page allocator
Reduce the rate at which nfsd threads hammer on the page allocator. This improves throughput scalability by enabling the threads to run more independently of each other. [mgorman: Update interpretation of alloc_pages_bulk return value] Link: https://lkml.kernel.org/r/20210325114228.27719-8-mgorman@techsingularity.net Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Reviewed-by: Alexander Lobakin <alobakin@pm.me> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: David Miller <davem@davemloft.net> Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Chuck Lever
|
ab8362645f |
SUNRPC: set rq_page_end differently
Patch series "SUNRPC consumer for the bulk page allocator"
This patch set and the measurements below are based on yesterday's
bulk allocator series:
git://git.kernel.org/pub/scm/linux/kernel/git/mel/linux.git mm-bulk-rebase-v5r9
The patches change SUNRPC to invoke the array-based bulk allocator
instead of alloc_page().
The micro-benchmark results are promising. I ran a mixture of 256KB
reads and writes over NFSv3. The server's kernel is built with KASAN
enabled, so the comparison is exaggerated but I believe it is still
valid.
I instrumented svc_recv() to measure the latency of each call to
svc_alloc_arg() and report it via a trace point. The following results
are averages across the trace events.
Single page: 25.007 us per call over 532,571 calls
Bulk list: 6.258 us per call over 517,034 calls
Bulk array: 4.590 us per call over 517,442 calls
This patch (of 2)
Refactor:
I'm about to use the loop variable @i for something else.
As far as the "i++" is concerned, that is a post-increment. The
value of @i is not used subsequently, so the increment operator
is unnecessary and can be removed.
Also note that nfsd_read_actor() was renamed nfsd_splice_actor()
by commit
|
||
|
Jesper Dangaard Brouer
|
3b822017b6 |
mm/page_alloc: inline __rmqueue_pcplist
When __alloc_pages_bulk() got introduced two callers of __rmqueue_pcplist exist and the compiler chooses to not inline this function. ./scripts/bloat-o-meter vmlinux-before vmlinux-inline__rmqueue_pcplist add/remove: 0/1 grow/shrink: 2/0 up/down: 164/-125 (39) Function old new delta rmqueue 2197 2296 +99 __alloc_pages_bulk 1921 1986 +65 __rmqueue_pcplist 125 - -125 Total: Before=19374127, After=19374166, chg +0.00% modprobe page_bench04_bulk loops=$((10**7)) Type:time_bulk_page_alloc_free_array - Per elem: 106 cycles(tsc) 29.595 ns (step:64) - (measurement period time:0.295955434 sec time_interval:295955434) - (invoke count:10000000 tsc_interval:1065447105) Before: - Per elem: 110 cycles(tsc) 30.633 ns (step:64) Link: https://lkml.kernel.org/r/20210325114228.27719-6-mgorman@techsingularity.net Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Reviewed-by: Alexander Lobakin <alobakin@pm.me> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: David Miller <davem@davemloft.net> Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Jesper Dangaard Brouer
|
ce76f9a1d9 |
mm/page_alloc: optimize code layout for __alloc_pages_bulk
Looking at perf-report and ASM-code for __alloc_pages_bulk() it is clear that the code activated is suboptimal. The compiler guesses wrong and places unlikely code at the beginning. Due to the use of WARN_ON_ONCE() macro the UD2 asm instruction is added to the code, which confuse the I-cache prefetcher in the CPU. [mgorman@techsingularity.net: minor changes and rebasing] Link: https://lkml.kernel.org/r/20210325114228.27719-5-mgorman@techsingularity.net Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Reviewed-by: Alexander Lobakin <alobakin@pm.me> Acked-By: Vlastimil Babka <vbabka@suse.cz> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: David Miller <davem@davemloft.net> Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Mel Gorman
|
0f87d9d30f |
mm/page_alloc: add an array-based interface to the bulk page allocator
The proposed callers for the bulk allocator store pages from the bulk allocator in an array. This patch adds an array-based interface to the API to avoid multiple list iterations. The page list interface is preserved to avoid requiring all users of the bulk API to allocate and manage enough storage to store the pages. [akpm@linux-foundation.org: remove now unused local `allocated'] Link: https://lkml.kernel.org/r/20210325114228.27719-4-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Reviewed-by: Alexander Lobakin <alobakin@pm.me> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: David Miller <davem@davemloft.net> Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Mel Gorman
|
387ba26fb1 |
mm/page_alloc: add a bulk page allocator
This patch adds a new page allocator interface via alloc_pages_bulk, and __alloc_pages_bulk_nodemask. A caller requests a number of pages to be allocated and added to a list. The API is not guaranteed to return the requested number of pages and may fail if the preferred allocation zone has limited free memory, the cpuset changes during the allocation or page debugging decides to fail an allocation. It's up to the caller to request more pages in batch if necessary. Note that this implementation is not very efficient and could be improved but it would require refactoring. The intent is to make it available early to determine what semantics are required by different callers. Once the full semantics are nailed down, it can be refactored. [mgorman@techsingularity.net: fix alloc_pages_bulk() return type, per Matthew] Link: https://lkml.kernel.org/r/20210325123713.GQ3697@techsingularity.net [mgorman@techsingularity.net: fix uninit var warning] Link: https://lkml.kernel.org/r/20210330114847.GX3697@techsingularity.net [mgorman@techsingularity.net: fix comment, per Vlastimil] Link: https://lkml.kernel.org/r/20210412110255.GV3697@techsingularity.net Link: https://lkml.kernel.org/r/20210325114228.27719-3-mgorman@techsingularity.net Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Acked-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Alexander Lobakin <alobakin@pm.me> Tested-by: Colin Ian King <colin.king@canonical.com> Cc: Alexander Duyck <alexander.duyck@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: David Miller <davem@davemloft.net> Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Mel Gorman
|
cb66bede61 |
mm/page_alloc: rename alloced to allocated
Patch series "Introduce a bulk order-0 page allocator with two in-tree users", v6.
This series introduces a bulk order-0 page allocator with sunrpc and the
network page pool being the first users. The implementation is not
efficient as semantics needed to be ironed out first. If no other
semantic changes are needed, it can be made more efficient. Despite that,
this is a performance-related for users that require multiple pages for an
operation without multiple round-trips to the page allocator. Quoting the
last patch for the high-speed networking use-case
Kernel XDP stats CPU pps Delta
Baseline XDP-RX CPU total 3,771,046 n/a
List XDP-RX CPU total 3,940,242 +4.49%
Array XDP-RX CPU total 4,249,224 +12.68%
Via the SUNRPC traces of svc_alloc_arg()
Single page: 25.007 us per call over 532,571 calls
Bulk list: 6.258 us per call over 517,034 calls
Bulk array: 4.590 us per call over 517,442 calls
Both potential users in this series are corner cases (NFS and high-speed
networks) so it is unlikely that most users will see any benefit in the
short term. Other potential other users are batch allocations for page
cache readahead, fault around and SLUB allocations when high-order pages
are unavailable. It's unknown how much benefit would be seen by
converting multiple page allocation calls to a single batch or what
difference it may make to headline performance.
Light testing of my own running dbench over NFS passed. Chuck and Jesper
conducted their own tests and details are included in the changelogs.
Patch 1 renames a variable name that is particularly unpopular
Patch 2 adds a bulk page allocator
Patch 3 adds an array-based version of the bulk allocator
Patches 4-5 adds micro-optimisations to the implementation
Patches 6-7 SUNRPC user
Patches 8-9 Network page_pool user
This patch (of 9):
Review feedback of the bulk allocator twice found problems with "alloced"
being a counter for pages allocated. The naming was based on the API name
"alloc" and was based on the idea that verbal communication about malloc
tends to use the fake word "malloced" instead of the fake word mallocated.
To be consistent, this preparation patch renames alloced to allocated in
rmqueue_bulk so the bulk allocator and per-cpu allocator use similar names
when the bulk allocator is introduced.
Link: https://lkml.kernel.org/r/20210325114228.27719-1-mgorman@techsingularity.net
Link: https://lkml.kernel.org/r/20210325114228.27719-2-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Alexander Lobakin <alobakin@pm.me>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Alexander Duyck <alexander.duyck@gmail.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
||
zhouchuangao
|
8f709dbdf9 |
mm/page_alloc: duplicate include linux/vmalloc.h
linux/vmalloc.h is repeatedly in the file page_alloc.c Link: https://lkml.kernel.org/r/1616468751-80656-1-git-send-email-zhouchuangao@vivo.com Signed-off-by: zhouchuangao <zhouchuangao@vivo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Kefeng Wang
|
39ddb991fc |
mm, page_alloc: avoid page_to_pfn() in move_freepages()
The start_pfn and end_pfn are already available in move_freepages_block(), there is no need to go back and forth between page and pfn in move_freepages and move_freepages_block, and pfn_valid_within() should validate pfn first before touching the page. Link: https://lkml.kernel.org/r/20210323131215.934472-1-liushixin2@huawei.com Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Liu Shixin <liushixin2@huawei.com> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Geert Uytterhoeven
|
d68d015a7e |
mm/Kconfig: remove default DISCONTIGMEM_MANUAL
Commit
|
||
Minchan Kim
|
a1394bddf9 |
mm: page_alloc: dump migrate-failed pages
Currently, debugging CMA allocation failures is quite limited. The most common source of these failures seems to be page migration which doesn't provide any useful information on the reason of the failure by itself. alloc_contig_range can report those failures as it holds a list of migrate-failed pages. The information logged by dump_page() has already proven helpful for debugging allocation issues, like identifying long-term pinnings on ZONE_MOVABLE or MIGRATE_CMA. Let's use the dynamic debugging infrastructure, such that we avoid flooding the logs and creating a lot of noise on frequent alloc_contig_range() calls. This information is helpful for debugging only. There are two ifdefery conditions to support common dyndbg options: - CONFIG_DYNAMIC_DEBUG_CORE && DYNAMIC_DEBUG_MODULE It aims for supporting the feature with only specific file with adding ccflags. - CONFIG_DYNAMIC_DEBUG It aims for supporting the feature with system wide globally. A simple example to enable the feature: Admin could enable the dump like this(by default, disabled) echo "func alloc_contig_dump_pages +p" > control Admin could disable it. echo "func alloc_contig_dump_pages =_" > control Detail goes Documentation/admin-guide/dynamic-debug-howto.rst A concern is utility functions in dump_page use inconsistent loglevels. In the future, we might want to make the loglevels used inside dump_page() consistent and eventually rework the way we log the information here. See [1]. [1] https://lore.kernel.org/linux-mm/YEh4doXvyuRl5BDB@google.com/ Link: https://lkml.kernel.org/r/20210311194042.825152-1-minchan@kernel.org Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: John Dias <joaodias@google.com> Cc: Michal Hocko <mhocko@suse.com> Cc: David Hildenbrand <david@redhat.com> Cc: Jason Baron <jbaron@akamai.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
Matthew Wilcox (Oracle)
|
5f076944f0 |
mm/mempolicy: fix mpol_misplaced kernel-doc
Sphinx interprets the Return section as a list and complains about it. Turn it into a sentence and move it to the end of the kernel-doc to fit the kernel-doc style. Link: https://lkml.kernel.org/r/20210225150642.2582252-8-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Matthew Wilcox (Oracle)
|
eb35073960 |
mm/mempolicy: rewrite alloc_pages_vma documentation
The current formatting doesn't quite work with kernel-doc. Link: https://lkml.kernel.org/r/20210225150642.2582252-7-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Matthew Wilcox (Oracle)
|
6421ec764a |
mm/mempolicy: rewrite alloc_pages documentation
Document alloc_pages() for both NUMA and non-NUMA cases as kernel-doc doesn't care. Link: https://lkml.kernel.org/r/20210225150642.2582252-6-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Matthew Wilcox (Oracle)
|
d7f946d0fa |
mm/mempolicy: rename alloc_pages_current to alloc_pages
When CONFIG_NUMA is enabled, alloc_pages() is a wrapper around alloc_pages_current(). This is pointless, just implement alloc_pages() directly. Link: https://lkml.kernel.org/r/20210225150642.2582252-5-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Matthew Wilcox (Oracle)
|
84172f4bb7 |
mm/page_alloc: combine __alloc_pages and __alloc_pages_nodemask
There are only two callers of __alloc_pages() so prune the thicket of alloc_page variants by combining the two functions together. Current callers of __alloc_pages() simply add an extra 'NULL' parameter and current callers of __alloc_pages_nodemask() call __alloc_pages() instead. Link: https://lkml.kernel.org/r/20210225150642.2582252-4-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Matthew Wilcox (Oracle)
|
6e5e0f286e |
mm/page_alloc: rename gfp_mask to gfp
Shorten some overly-long lines by renaming this identifier. Link: https://lkml.kernel.org/r/20210225150642.2582252-3-willy@infradead.org Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |